www.sylvania.com
QUICKTRONIC® T8 Instant Start
Universal Voltage Systems
Lamp Striation Control
Low Ballast Factor
Q HE T8 ISL
High Efficiency Series
Lamp / Ballast Guide
32W T8 – OCTRON lamps
1-lamp QHE1x32T8/UNV ISL-SC
2-lamp QHE2x32T8/UNV ISL-SC
3-lamp QHE3x32T8/UNV ISL-SC
4-lamp QHE4x32T8/UNV ISL-SC
®
Also operates:
FBO32, FBO31, FO25, FBO24, FO17,
FBO16, FO30/SS (30W), FBO30/SS
(30W), FBO29/SS (29W), FO28/SS (28W)
& FO25/SS (25W)
FO40T8 operation:
1 lamp on 2L ballast; 2 lamps on 3L
ballast; 3 lamps on 4L ballast
Key System Features
• H
igh Efficiency Systems over
90% efficient
•NEMA Premium Electronic Ballast
Program compliant
•Lamp Striation Control (LSC)
•Over 100 LPW (lumens/watt) with
OCTRON SUPERSAVER® lamps
•Lowest power T8 I.S. Systems
•Universal voltage (120-277)
•Small Can enclosure size
•30-50% Energy savings
•Min. Starting Temp:
• -20°F (-29°C) for T8 lamps
• 60°F (16°C) for Energy Saving
T8 lamps
• 0°F (-18°C) for FO40T8 lamps
•<10% THD
•Virtually eliminates lamp flicker
•RoHS compliant
•Lead-free solder and manufacturing
process
Application Information
SYLVANIA QUICKTRONIC
High Efficiency ballasts
are ideally suited for:
•Any applications where the lowest
power T8 systems are needed for
maximum energy savings
•Energy Retrofits
•Commercial & Retail
•Hospitality & Institutional
•New Construction
ECS401 - 6-13
SYLVANIA QUICKTRONIC High Efficiency,
(QHE) energy-saving electronic T8 ballasts
offer several advantages:
1. Same Light, Less Power!
• Up to 6% in energy savings
compared to standard T8 low
power electronic ballasts without
compromising light output
•M
aximum energy savings when
compared to F40T12 magnetically
ballasted systems
2. Parallel Circuitry: keeps remaining
lamps lit if one or more go out.
3. Lamp Striation Control (LSC): T8
energy saving lamps should be
operated above 60°F, but under certain
conditions the lamps may striate. LSC
circuitry may minimize or eliminate this
condition; however there are limited
applications where LSC circuitry may
not entirely mitigate lamp striations
4. NEMA Premium Electronic Ballast
Program compliant. The program
promotes the use of high efficiency
T8 electronic ballasts by meeting
or exceeding the Ballast Efficiency
System Information
SYLVANIA QUICKTRONIC High Efficiency
(QHE) System advantages:
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
• Utilizes Instant Start operation for
• Highest System Efficacy
• Low temperature starting capability
Factors, (BEF) established by the CEE,
(Consortium for Energy Efficiency).
For additional information on this
program go to: www.cee1.org or
www.nema.org
These ballasts are also RoHS compliant
and feature lead-free solder and
manufacturing process.
SYLVANIA QUICKTRONIC High Efficiency
(QHE) systems are covered by the
QUICK 60+® warranty, the first and
most comprehensive lamp & ballast
system warranty in the industry.
5. New Banded Packaging
•D
istributor-friendly for easy stocking
and individual ballast sales
•R
educed waste
• E asy removable bands
•N
o tangled wires
Relative
Input InitialSystemMean Mean
System Type Power System Efficacy System Light Energy
(2-lamp)
(W) Lumens LPW LumensOutputSavings
F34T12 - E.S. Magnetic Ballast
72
4660
65
3960
FO32/XP - QHE2x32T8/UNV ISL-SC
FO28/SS - QHE2x32T8/UNV ISL-SC
48
42
4680
4250
98
101
4440
3995
®
Baseline Baseline
112%
101%
% Relative Light Output (Mean Lumens)
120%
• Very low harmonic distortion (<10%)THD
110%
• Operate at >42 kHz to reduce potential
interference with infrared control systems
100%
% System Wattage (Power)
112%
101%
100% 100%
90%
80%
33%
Energy
Savings
70%
67%
60%
42%
Energy
Savings
58%
50%
40%
2-F34T12/SS
E.S. Magnetic Ballast
2-FO32/XP/ECO
QHE 2x32T8/UNV ISL
2-FO28/SUPERSAVER
QHE 2x32T8/UNV ISL
33%
42%
Catalog #
Date
Project
Prepared by
High Efficiency
Comments
Item
OSRAM SYLVANIA
Number
Description
49837
QHE1X32T8/UNV ISL-SC 2600
3000
2850
2725
2475
1
1
1
1
1
0.78
0.78
0.78
0.78
0.78
2030
2340
2225
2125
1930
1865
2200
2090
2000
1815
25
25
24
22
20
81
94
93
97
97
3.12
3.12
3.25
3.55
3.90
0.41/0.18 FO32/700
0.41/0.18 FO32/XP 0.38/0.16 FO30/SS 0.35/0.15 FO28/SS 0.32/0.14 FO25/SS 2600
3000
2850
2725
2475
2
2
2
2
2
0.78
0.78
0.78
0.78
0.78
4055
4680
4445
4250
3860
3730
4400
4180
3995
3630
48
48
45
42
38
84
98
99
101
102
1.63
1.63
1.73
1.86
2.05
QHE3X32T8/UNV ISL-SC Banded Pack
4986510-Pack
0.61/0.27 FO32/700
0.61/0.27 FO32/XP 0.58/0.25 FO30/SS 0.53/0.23 FO28/SS 0.48/0.21 FO25/SS 2600
3000
2850
2725
2475
3
3
3
3
3
0.78
0.78
0.78
0.78
0.78
6085
7020
6670
6380
5790
5595
6600
6270
5995
5445
73/72
73/72
68
63
57
83/85
96/98
98
101
102
1.08
1.08
1.15
1.24
1.37
49840
0.80/0.35 FO32/700
0.80/0.35 FO32/XP 0.75/0.32 FO30/SS 0.71/0.31 FO28/SS 0.62/0.27 FO25/SS 2600
3000
2850
2725
2475
4
4
4
4
4
0.78
0.78
0.78
0.78
0.78
8110
9360
8890
8500
7720
7455
8800
8360
7990
7260
95
95
89
84
76/75
85
99
100
101
102/103
0.82
0.82
0.88
0.93
1.04
49838
QHE2X32T8/UNV ISL-SC Banded Pack
4986310-Pack
49839
QHE4X32T8/UNV ISL-SC Banded Pack
4986710-Pack
Banded Pack, (add “-B” to Description). Banded Pack and 10-Pack contain 10 pieces each.
1 Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
Black/White
White
Black/White
Blue
Blue
Black/White
Black
Blue
BALLAST
White
White
Black
White
Red
Blue
BALLAST
BALLAST
Blue
Blue
Blue
Black
White
Red
Black
Black
BALLAST
White
White
Red
Red
Specifications
Data based on F32T8
Starting Method: Instant Start
Ballast Factor: 0.78
Circuit Type: Parallel
Lamp Frequency: >42 kHz
Lamp CCF: Less than 1.7
Starting Temp:2
-20°F (-29°C) for OCTRON T8 lamps;
60°F (16°C) for SUPERSAVER® T8 lamps
0°F (-18°C) for FO40T8
Input Frequency: 50/60 Hz
Low THD: <10%
Power Factor: >98%
Black
Blue Voltage Range: ±10% of 120-277V White
Blue
Blue
Blue
Blue
Blue rated line (108-305V) Red
BALLAST
Blue
BALLAST
BALLAST
BALLAST
White
Blue
LAMP
Red
LAMP
QUICKTRONIC FM (2 L
QUICKTRONIC
FM (1below
LAMP)
2 Operation
50°F (10°C) may affect Note:
light
For QT-FM green ground wire to termi
LAMP
green ground wire to terminal required.
QUICKTRONICNote:
FMFor(2QT-FM
LAMP)
QUICKTRONIC FM (1 LAMP)
QUICKTRONIC
FM (2orLAMP)
QUICKTRONIC
Note: For QT-FM green ground
wire to terminal required.FM (1 LAMP) Note: For QT-FM green ground wire to terminal required.output
lamp operation – see “Low Temp.
LAMP
LAMP
LAMP
LAMP cap any blue lead.
Note: For two lamp application,
LAMP
lamp
application,
cap
any
two
blue leads.
Note:For
Forone
three
lamp
application,
cap
any
unused
blue lead.
Note:
For cap
three
lamp
cap any unused blue lead.
Insulate
to
600
volts.
For two lamp application,
two
blueapplication,
leads individually.
For twocap
lamp
application,
For one lamp application,
two
blue
leads,cap
onetwo
redblue
and leads individually.
QUICKTRONIC
3x32
For
one
lamp
application,
cap
two
one yellow lead individually. Insulate to 600 volts.blue leads, one red and
one yellow lead individually. Insulate to 600 volts.
White
Green
Black
Product Weight:
1.6 lbs each (approx)
Red
Wiring:
ONIC FM (1 LAMP)
Blue
Black Blue
White LAMP
BALLAST
White
Red
YellowBALLAST
Red
LAMP
Red
Black
White
Red
Blue
Note: For QT-FM green ground wire to terminal required.
QUICKTRONIC 4x32
Black
White
Red
Black Blue
Blue
BlackBlue
Blue
BALLAST
White
Blue
White BALLAST
BALLAST
Red
Blue
Black Blue
BALLAST
White Blue
Black BALLAST
Red
White
8.7 mm
Slot
QUICKTRONIC FM (2 LAMP)
Width
White
Red
Blue
Blue
Blue
Blue
BALLAST Blue
System Life / Warranty
Red
Mounting
Length
Height
QUICKTRONIC products are covered by the
QUICK 60+® warranty, a comprehensive
lamp and ballast system warranty. For
additional details, refer to the QUICK 60+
warranty bulletin.
BALLAST
Bl
Bl
Bl
Length
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 1x40DL
QUICKTRONIC 1x40DL
49838 QHE 2 x 32T8 /
Black
Blue
Blue
White
Blue
QUICKTRONIC PROFESSIONAL
BALLAST
Black
Blue
Red
Blue
Black
BALLAST
White
Number of Lamps
BALLAST
White
Red
Item Number
QUICKTRONIC 1x40DL
QUICKTRONIC 2x40DL
QUICKTRONIC 2x40DL
UNV ISL - SC
Blue
Blue
Red
OSRAM
SYLVANIA
QUICKTRONIC
2x40DL
QUICKTRONIC 3x40DL National Customer
QUICKTRONIC 3x40DL
Case Size
Blue
Black
Starting/Ballast
Factor Blue
BALLAST
White
Black
Blue
Black Red
Line
Voltage (120-277V)
Blue
White
White
BALLAST
Red
Yellow
Primary
Lamp Wattage
BALLAST
Yellow
Red
Yellow
Yellow
LAMP
LAMP
SYLVANIA,
the system solution, OCTRON, XP, SUPERSAVER, and
QUICK 60+ areLAMP
registered trademarks of OSRAM SYLVANIA Inc.
LAMP
LAMP
SEE THE WORLD IN A NEW LIGHT is a trademark of OSRAM SYLVANIA
Inc. QUICKTRONIC is a registered trademark of OSRAM GmbH.
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate
to 600 volts.
LAMP
on, cap any blue lead. Insulate to 600 volts.
Starting” definition.
3 Complies with European Union Restriction
of Hazardous Substances Directive (Directive
EC 2002/95)
Black
Red
Note: For QT-FM green ground wire to terminal required.
Leads only (no connectors provided)
en ground wire to terminal required.
QT-FMapplication,
green ground wire
to terminal
required. blue lead.
Note: For Note:
threeForlamp
cap
any unused
For two lamp application, cap two blue leads individually.
For one lamp application, cap two blue leads, one red and
one yellow lead individually. Insulate to 600 volts.
QUICKTRONIC 4x32
QUICKTRONIC 4x32
BALLAST
Dimensions:
Overall: 9.5" L x 1.68" W x 1.18" H
Mounting: 8.90"
Black
Blue
RedRed
©2013 OSRAM SYLVANIA
TRONIC 2x32
TRONIC 2x40DL
QHE Instant Start ballasts will operate F17,
F25 and F32 (and the SUPERSAVER® &
U-Bend equivalent) T8 lamps. Complete
performance data is available in the
QUICKSYSTEMS section of the SYLVANIA
Ballast Technology & Specification Guide.
UL Listed Class P, Type 1 Outdoor
LAMP
BALLAST
Red
LAMP
CSA Certified
Red
LAMP
LAMP
LAMP
70°C Max Case Temperature
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
FCC 47CFR Part 18 Non-Consumer
LAMP
LAMP
LAMP
LAMP
LAMP
LAMP
Note: For two lamp application, cap
Note: For one lamp application,
any Rating
blue lead.
Class A cap
Sound
any blue
lead.volts.
Note: For one lamp application,QUICKTRONIC
cap any blue lead. 1x32 Note: For two lamp application, cap
For one lamp application, cap any tw
Insulate
to 600
3 lead.
Note: Forcap
twoany
lamp
cap any blue
Note:to
For
one
lamp application, cap any blueFor
lead.
RoHS
QUICKTRONIC 1x32
one lamp application,
twoapplication,
blue
leads.Compliant
Insulate
600
volts.
Insulate to 600 volts.
QUICKTRONIC 1x32
For one
lamp
application, cap any 2x32
two blue leads.
QUICKTRONIC
Insulate to 600 volts.
Insulate
to 600
volts.
NEMA Premium Electronic Ballast
QUICKTRONIC 3x
QUICKTRONIC 2x32
Insulate to 600 volts.
QUICKTRONIC 2x32
QUICKTRONIC 3x32 Program compliant
QUICKTRONIC 3x32
ANSI C62.41 Cat. A Transient Protection
Black
Blue
Black
Blue
White
Blue
White
GFCI compatible
White
Black
Blue
Green
BALLAST
White
Blue
White
Green
BALLAST
BALLAST
White
Black
Blue
White
Blue
White
Yellow
Red
Black
Green
Black
BALLAST
Emergency
ballast
compatible
Green
White
BALLAST
BALLAST
Green
Black
BALLAST
Blue
Yellow
Red
Green
Black
BALLAST
BALLAST
White
Yellow
Red
BALLAST
Black
Yellow
Red
Black
Remote Mounting (Max. wire length from
Blue
Yellow
Red
Red
Yellow
Red
ballast case to lampholder):
B
LAMP
Blue
LAMP
Blue
LAMP
• 20 ft:Blue
full wattage T8s
Blue
LAMP
Ye
LAMP
Blue
LAMP
LAMP
Yellow
• 10 ft:Yellow
energy saving T8s
LAMP
R
LAMP
Red
LAMP
LAMP
LAMP
Red
• 4 ft: 25W
energy saving T8s
LAMP
LAMP
RedLAMP
LAMP
Red
Blue
Blue
Blue
Blue
Data based upon SYLVANIA OCTRON®
lamps shown. QUICKTRONIC® QHE Instant
Start ballasts are also compatible with
other lamp manufacturers equivalent lamp
types that meet ANSI specifications.
Rated Ballast InputSystem
Lumens No. of Factor System
Mean Power Efficacy
(lm)
Lamps
(BF) Lumens Lumens (W)
(lm/W) BEF 1
0.21/0.09 FO32/700
0.21/0.09 FO32/XP® 0.20/0.09 FO30/SS 0.19/0.08 FO28/SS 0.17/0.08 FO25/SS pplication, cap any blue lead.
e to 600 volts.
ALLAST
Input
Current
Lamp
(AMPS)
Type
Banded Pack
4986110-Pack
LAMP
AMP
Performance Guide
High Efficiency Universal Voltage (120-277V), Lamp Striation Control
LAMP
LAST
T8 Instant Start
Type
Q HE T8 ISL
ALLAST
Low Ballast Factor
SPECIFICATION DATA
LAMP
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
QUICKTRONIC 2x59*
QUICKTRONIC 2x59*
QUICKTRONIC 2x96IS
Note: For two lamp application, cap any blue lead. Insulate toQUICKTRONIC
600 volts.
2x96IS
QUICKTRONIC 3x40DL
Blue
Blue
Red
Red
LAMP 2x59*
QUICKTRONIC
LAMP
QUICKTRONIC 2x96IS
QUICKTRONIC 2x96HO
QUICKTRONIC 2x96HO
Note: For two lamp application, cap any blue le
QUICKTRONIC 3x40
Service and Sales Center
1-800-LIGHTBULB
Black
(1-800-544-4828)
White
BALLAST
Yellow
www.sylvania.com
Yellow
Blue
Blue
Red
Red
Specifications subject to change without notice.
LAMP
LAMP
QUICKTRONIC 2x96HO