CBI Hydraulic Magnetic Circuit Breakers

advertisement
����
�����
DATA
SHEET
QA17 & QF17 RANGE
Residential/Commercial
protection
��� �����
eakers
�������������������������������
Applications
ndent of Ambient Temperature
- Commercial applications requiring high sensitivity earth leakage protection from electrical
shock and fire hazards.
d Auxiliary
Switch
- Installations
exposed to high and low ambient
ings,Terminations
and TimeThe
Delays
Available magnetic design
temperatures.
hydraulic
allows the device to always keep rated current.
(Two Tone Flush Rocker)
� �����������������������������
� ��������������������
� ����������������������������������� �����������������������
��������������������������������
� �������������������������������������������������
- Top busbar design
enables easier installation
� �����������������������������
- Single pole plus
switched
neutral earth leakage
� �����������������������
����������������������������������
��������
-
tallations
n
Power Conditioning
Alternative Energy Equipment
Lighting Control
Marine Protection
Features
pment
- CE approved.
- UL1077 and UL1053 certified.
Circuit Breaker
Circuit Breaker
Circuit Breaker
CE,VDE
60947-2)
UL489A,
CE,VDE (EN60947-2)
DIN(ENEN
60 947-1 and 60
947-2.
Lus 489- VDE certified to
1,2
1, 3 (Parallel)
- Small frame size240V
(26mm
wide).
AC, 80V DC
80V DC
V AC, 80V DC, 120/240V AC
0.1-50A(ac) 0.1-100A(dc)
110-250A
80A ac,-100A
dc(1p), 0.1-50A(2p)
Energy
limiting capability
on both switch and
circuit
5kA
10kA
A, 5kA(2p)
breaker versions.
Switch
Circuit Breaker
Circuit Breaker
- Switch version cURus
fitted1077with short circuit protection
CE,VDE (EN 60934
us 508, CE, VDE (EN60947-3)
for additional safety.
1 to 6
1 to 4
protection
- Trip point is unaffected by ambient temperature
- Current ratings up to 63A
- Trip indication (mid trip handle position)
�
�
�
�
�
�
�
�
QF17A�
5 to 63 A�
������������
V AC, 120/240V AC
A (For 1 sec)
80V DC, 277V AC, 277/480 V AC
80V DC, 240V AC, 240/415V AC
0.02-100A (1p), 0.02-70A (2-6p)
0.01-100A (qp), 0.1-70A (2-4p)
2kA ac, 5kA dc
3kA ac, 5kA dc
10G to MIL-STD-202F Method 204D Test A
100G to MIL-STD-202F Method 213B Test A
Technical Data
50/60Hz
DC
}
-40OC to +85OC
10000
50/60Hz
DC
LONG DELAY
CODE: AS
100
QA17C
Standard Ampere Ratings (A)
5 to 63 A
40 and 63 A
Sensitivity (mA)
30, 100, 300
300
500
600
700
800
900
1000
1100
PERCENT OF RATED CURRENT
150
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
10
1
0.1
0.01
Number of Poles
400
TRIP TIME IN SECONDS
QA17A
TYPICAL TIME/CURRENT
200
LONG DELAY
CODE: BS
Product Type
CHARACTERISTICS AT 25˚C
00
125
}
NOTE: 8 x INRUSH
1000
NOTE: 8 x INRUSH
1+N
��������������
Earth Leakage
1200
0.001
100
125
200
300
400
150
Equipment Type
}
50/60Hz
DC
500
600
700
LONG DELAY
CODE: CS
30, 100, 300
30, 100, 300
1+N
1+N
1+N
Earth Leakage/GFCS
Earth Leakage/GFCS
800
900
1000
1100
1200
Earth} Leakage
LONG DELAY
50/60 Hz
DC
240
������������
1000
NOTE: 6 x INRUSH
30, 100, 300
PERCENT OF RATED CURRENT
10000
Rated Voltage (V)
������������������
��������������
���������������������������
���������������������
����������������
����������������
��������������������������
�������������������������
��������������������
QF17C
��� �����40 and 63 A
240
CODE: OP
���������������
240
100
��������� 3 kA
���������������
Withstand Capacity (kA)
–
���������������
Weight (kg)
0,26
��������������
Tripping Curves( ) (standard)
2( ), 3
Operating Temperature���������������������
-40 to +60ºC
Rated Interrupting/
TRIP TIME IN SECONDS
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
1
0.1
0.01
00
125
150
200
300
400
500
600
700
800
1
900
1000
1100
1200
PERCENT OF RATED CURRENT
1
0.001
200
100
150
300
400
500
600
700
PERCENT OF RATED CURRENT
���������������������������
���������������
���� �����
����� ������������
6 kA
�� �
3 kA
–
��������������
0,24
0,26
���������������������
–
2
��������������
-40 to +80ºC��������������
-40 to +80ºC
���������������
��������������
���������������
��������������
����������������
–
10
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
800
900
1000
1100
1200
240
���������������
���
– ����������
��6�kA
��������������
0,24 CBI Hydraulic
���������������������
–
��������������
��������������
-40 to +80ºC
���������������
��������������
����������������
��������������
���������������
��������������������
�
������ Circuit Breakers
Magnetic
����������
��������������
��������������
���������������
��������������
DATA
SHEET
Contents
BE Range
����
�����
CBI Ranges of Circuit Breakers
ciple of the Hydraulic Magnetic Breakers ��� �����
Armature
�������������������������������
Trip
����
�����
Trip Latch
Trip
��� �����
Core
Spring
Tube
Frame
Oil
Coil
e
�������������������������������
1 3Principle of the Hydraulic
2 Magnetic Circuit Breakers
3
4
� �����������������������������
DATA
SHEET
DATA
SHEET
��������
raulic Magnetic Circuit
With high values� of��������������������
overloads
During this movement, the
If the overload persists, the
akers (HMCB) operate on
hydraulic fluid regulates the
core reaches the pole piece
or short circuit, �the���������������������������������
magnetic
magnetic force produced
after a time delay particular to
flux produced by the
coil is
cores speed of travel, thereby
��������������������������������
load current flowing
creating a controlled time
that current and in so doing,
sufficient to attract the
� ���������������������������������
CBE Range
ough a series connected
the reluctance of the
armature to the pole face and
delay which is inversely
�����������������������������
noid coil which is wound
trip the breaker �even
though
proportional to the magnimagnetic circuit drops
4
B-Frame
Series
Circuit
breakers
�����������������������
������������
D-Frame Series
� �����������������������������
und an hermetically sealed
tudeCircuit
of the Breakers
current. This time
considerably,
so that the
the core has not� moved.
This
erecontaining an ��������
iron core,
armature
is attracted to the
is called the instantaneous trip
delay is useful in that if the
� ��������������������
ring and dampening Featuresoverload is of short duration,
region of the
circuit breaker
pole
with sufficient force
� face
�����������������������������������
�����������������������
.
characteristic.
i.e. start up of motors,CBE
etc, Range to collapse the latch mecha��������������������������������
- Hydraulic-Magnetic Technology
core Independent
returns toofitsAmbient
rest Temperaturenism (toggle) and conse- 100% Ratingthe
Capability
�
�������������������������������������������������
D-Frame Series Circuit
Breakers
urrents below the circuit
position once the overload
quently
trip the breaker.
Unlike thermal circuit
- Up to Six Poles
� ������������������
�
�����������������������������
������������
cULus,VDE
and
CE
Approved
aker
rating,
the
magnetic
breakers, the hydraulic
disappears.
Delays Available
� ��������������
- Ratings up to 250A
� contacts
�����������������������
����������������������������������
in the solenoid is
magnetic circuit breaker’s trip
The
separate, the
Features
� ���������������������������
- Optional Trip Alarm Switch and Auxiliary Switch
fficient to 8
attract the
core
current ceases to flow, and
point is unaffected by ambient
C-Frame
breakers
GE
- Wide RangeSeries
of Circuits,Circuit
Mountings,Terminations
and Time Delays
Available
- Hydraulic-Magnetic
Technology
� ���������������������
ards the pole piece due
to
temperature. After
tripping,
the core returns to its rest
- Optional
Mid Trip Indication
- 100% Rating Capability Independent of Ambient Temperature
spring pressure.
the breaker may�be����������������
re-closed
- Two Colour Handle Indication (Two Tone
- Flush
Up toRocker)
Six Poles position.
ection
L
� there
����������������
I
immediately since
is no
- cULus,VDE
and
CE
Approved
T
A
Y
- Ratings
ere anoverload
occurs, Applications
i.e.Energy Equipment
cooling down time
Q Uup to 250A � ������������������
� necessary.
��������������������������
- Alternative
- Optional Trip Alarm Switch and Auxiliary Switch
ents above -the������������
circuit- Control
� �������������������������
Lighting
AC and DC Branch Circuit Installations - Wide
- Power
� Mountings,Terminations
�������������� and Time Delays Available
RangeConditioning
of Circuits,
aker rating, the
magnetic
By the nature of theprinciple
-Protection
Telecom DC Power Distribution
- Alternative
Equipment
- Marine
- Optional
Mid TripEnergy
Indication
� ��������������������
�
���������������������������
- UPS Equipment
- Colour
LightingHandle
ControlIndication (Two Tone Flush Rocker)
in the solenoid produces
of operation, it is possible to
- Two
� ���
�
���������������������
Mobile
Power-Generation
Equipment
Marine
Protection
cient pull on the core to
obtain any variation
of �����
1
2
D-Frame
Series
Circuit
breakers
�
����������������
Applications
h sensi- movement
mmenceits
time/current characteristic.
Technical Data
ectrical
ard
the Circuit
pole piece.
�
����������������
Breaker
Circuit Breaker
Circuit
Breaker
- AC
and DC
Branch Circuit Installations
- Power Conditioning
UL489A
1,2
mbient
80V DC
design
0.05 – 50A
current.
5kA
Product Type
Q
Circuit Breaker
��������������
Circuit Breaker
Circuit Breaker
(2)
cURus(2), CE,VDE (EN60934)
, CE,VDE
(EN60934)
CE,VDE
(EN��������������������������
60947-2)
CE,VDE
(EN60947-2)
�Distribution
Approvals
cULus 489 cURus
- Telecom
DC Power
- UL489A,
Alternative
Energy
Equipment
3 (Parallel)
Number1,2
of Poles
1, 2
1 -– 6UPS
cURus
/ 1������������
– 41,2VDE
Equipment
- 1,Lighting
Control
���������������
�
�������������������������
240V AC, 80VEquipment
DC
DC Protection
Operating
Voltages
120 V AC, 80V
120/240V
AC Range
CBE
- DC,
Mobile
Power-Generation
- 80V
Marine
80V
DC
240V
AC
��
���������
���
������������
0.1-100A(dc)
110-250A
Current Ratings
0.1-80A ac, 100A dc(1p), 0.1-50A(2p) 0.1-50A(ac)
� ��������������������
0.05 – 50A
0.05 – 50A
5kA
10kA
Interrupting capacity
10kA, 5kA(2p) Technical���������������
�� �
Data
(3)
� ���
�����Breakers
Q–Series
Miniature
Circuit
7.5kA cURus / 4kA VDE
2 kA & 5kA
TE
Y
G
O
N OL
CH
���������������
��� ����������
�� �
Product Type
Switch
Circuit Breaker
Circuit Breaker
���������������
��������������
��������������
Product
Type
Circuit
Breaker
Circuit
Breaker
Circuit
Breaker
Circuit Breaker Approvals
Circuit Breaker
Circuit Breaker
cURus 1077
CE,VDE (EN 60934
cULus 508, CE, VDE (EN60947-3)
CE,VDE
(EN 60947-2)
UL489A, CE,VDE (EN60947-2)
Approvals
cULus 489
(2)
(4)
��������������
���������������������
���������������������
cURus(2), UL1500
cURus
1
to
6
1
to
4
NumbercURus
of Poles , UL1500
1, 2
1,2
1, 3 (Parallel)
Number of Poles
1, 2
80V DC, 277V AC, 277/480 V AC
80V DC, 240V AC, 240/415V
AC
Operating
Voltages Leakage
22 ��������������
Q-Series
Earth
Products
��������������
��������������
120V Protection
AC, 120/240V
1
1,2
1 –Operating
3AC
���������������������
��������������
��������������
240V AC,
80V DC
80V DC
Voltages
120 V AC, 80V DC, 120/240V AC
Current 120V
RatingsAC, 120/240V AC
0.02-100A (1p), 0.02-70A (2-6p)
0.01-100A (qp), 0.1-70A (2-4p)
50A
65V DC
80VCurrent
DC, 240V
���������������
���������������
0.1-100A(dc)
110-250A
RatingsAC, 277V AC 0.1-80A ac, 100A dc(1p), 0.1-50A(2p) 0.1-50A(ac)
��������������
��������������
Interrupting capacity
2kA ac, 5kA dc
3kA ac, 5kA dc
600 A (For 1 sec)
���������������
5kA ���������������
10kA
Interrupting
capacity
10kA, 5kA(2p)
���������������
0.05 – 50A ������������
0.05 – 50A
0.05
– 50A
����������������
���������������������������
�������������� ���������������
��������������
Vibration Resistance
10G to MIL-STD-202F Method 204D Test A
Product
Type 100G to MIL-STD-202F Method���
Switch
Circuit Breaker
Circuit Breaker
1.5kA
1.5kA
– ���
�� ������������
���������Shock Resistance
����������
��������������������
����������������
213B Test
A
cURus 1077
CE,VDE (EN 60934
Approvals
Temperature
Range
-Operating
Top Method
busbar
design
enables
easier
10G to
MIL-STD-202F
204D
Test
A
-40cULus
C to 508,
+85 CE,
C ��VDE
���������������
��Number
�installation
� (EN60947-3)
�
1 to 6
1 to 4
of Poles
1, 2
100G
to
MIL-STD-202F
Method
213B
Test
A
-Protective
Single
poleProtective
plusSurge
switched
neutral
earth
leakage
5kA
and
20kA
Rail
Mounted
Protective
Devices
���������������
��������������
��������������
80V DC, 277V AC, 277/480������
V AC
80V DC, 240V AC, 240/415V AC
Operating
Voltages
120V AC, 120/240V
AC
ed
20kA
Mounted
Surge
Rail
Protective
Mounted
Surge
Devices
Surge
Devices
Devices
Preferred
O
O
Cprotection
to +85
C of rated current independent
Circuit
breakers
can-40carry
100%
of ambient
temperature.
Current Ratings
0.02-100A (1p), 0.02-70A (2-6p)
0.01-100A (qp), 0.1-70A (2-4p)
50A
60(2)947-2.
��������������
���������������������
���������������������
����������
���������������
Standard
02, UL1077 & CSA 22.2 No 235-M89, (3)5kA with back up fuse, (4)UL508
& CSAcapacity
22.2 No 14-M9 600 A (For 1 sec)
Interrupting
2kA ac, 5kA dc
3kA ac, 5kA dc
Trip
point
is
unaffected
by
ambient
temperature
��������������
��������������
��������������
Delays
��������������
��������������
��������������
Vibration Product
ResistanceType
10G to MIL-STD-202F
204D Test A QZ
QY Method
QDC
QL
���� mounting
�����
Trip point not���������������������
affected by ambient temperature—suitable
for
into
small
enclosures.
���������������������������
Shock Resistance
������
���������������
���������������
���������������
Method
213B Test
10000
0.1 –A 60 (UL 1077)
0.1 – 63 (1 pole)
0.1 – 63 (1 pole)
Standard Ampere Ratings (A)
- Current
ratings up to 63A
��������������
�������������� 100G to MIL-STD-202F
h and50/60Hz
circuit
50/60Hz } LONG�����
��������������������
DELAY
2
4
Q-Series
Miniature
Circuit
breakers
} LONG DELAY
DC
Operating
Temperature
Range
-40
C
to
+85
C
DC
0.1 – 50 (2 poles) � 5 – 50 (IEC� 60947-2)
0.1 – 50 (2 poles)
CODE:
�
� BS
CODE: AS
����������������
���������������������������
���
��������������
��� �������� �
��������
�
-after
Trip
indication (mid trip handle���������������
position)
1000 trip.
mmediate
resetting
20 – 100 (2p parallel)
0.1
– 25
20 – 100 (2p ����
parallel)
����
����
����
����
����
����
����������������
110 – 150 (3p parallel)
110 – 150 (3p parallel)
Preferred
protection
��
100
�������
��
��
��
���
���
�����
�����
TYPICAL TIME/CURRENT
1, 2, 3, 1+N, 3+N
1, 2, 3, 1+N, 3+N
1, 2
1, 2
Number
of Poles
TYPICAL TIME/CURRENT
Standard
Any current rating possible.
�������
����
���2, 3p parallel���
��
�� 2, 3p parallel ��
���
10
Delays
2 poles in series
��
�������
��
���
���
����
����
�����
�����
Large range of���������������
time delays1 available.
120V AC (1p)
80V DC
120V AC (1p)
80V DC
Rated Voltage (V)
������� 120/240V
���
�� DC (1, 2p &��
� (1p)
���
���
���
240V AC
125V
2p
125V DC (1, 2p &
2p
AC(2p)
���� ����� 0.1
���������������������������
��
������� 240V AC
���(1p)
���� parallel) ���� 240/415V
����AC (2, 4p) ���� parallel)�����
�����
������
��������������������
�����
277V AC (1p)
Polarity sensitive
240/415V AC 2, 4p)
250V DC (2p in series)
0.01
�������
��
�
��� 277/480V
���AC (2, 3p) ����
����
����
Polarity sensitive
����
���� Approvals
���� VDE����
����
����
����
����
�����
�����
(EN 60947-2)
3kA (240/415V
AC)
10kA
6kA (240/415V
AC)
10kA
2
8
Q
-series
√
√
√
√
0.001 Surge Protection Devices
0
800
900
100
1100
1200��
200
300
400
100
1100
100
�������
�� 500 600 700�� 800& 900 ��
���
�����
�����
������
�����
������
125
CE1200���
URRENT
PERCENT OF RATED CURRENTInterrupt.
150
cULus (UL489_CSA) 10kA (120/240V
AC)
√
�������
����
���
���
��
��
��
���
���
�����
�����
Capacity
UL489A
10kA
10000
√
QA17C
QF17A
QF17C
- 50/60Hz
SANS
61643-1 approved
��
} LONG
�������
��
��� 50/60Hz
���DELAY
����
����
�����
�����
������5kA (1p,������
������
oved
1643-1
LONG DELAY
}approved
DC(kA)
cURus
120V
ac)
DC
CODE:
OP
CODE: CS
1000
40 and
63pole)
A
5�������
to 63 A
40 ��
and 63 A
size
(13mm
per pole)
(UL1077_CSA)
ac)
���
��
�
���
���
���√
����5kA (277/480V
���� √
m)t -per
sizeCompact
pole)
(13mm
per
√
√ ����
Dual Mounting
Clip-in,
Dual
mounting
rail
and
0lg-and
100,
300��
100,
300DIN
100, Mounting
300 ����
�������
���rail) 30,
����
����
����
�����
�����
������
�����
�����
Dual
(Mini
mounting
DIN
rail30,
rail)
and
(Mini
DIN
rail
rail)and100(Mini
DIN30,
rail)
Options
(DIN & Mini)
TYPICAL TIME/CURRENT
√
√
√
√
TIME/CURRENT
- TYPICAL
LED
indication
of
theSPD
SPD’s
condition
whilst
ON,
the
SPDthe
is OFF
functional,
if OFF
and
the mains
is����
still
available,
1 + SPD’s
N ON,
1whilst
+ SPD
N ON,
+N
�������
��
� mains
���
����
����power
�����
���� √
DIN
Rail
ndition
cation
SPD’s
of
–condition
whilst
the
– whilst
condition
the
ON,
–isthe
functional,
is functional,
if–the
OFF
SPD
and
isif1the
OFF
functional,
and
power
if���
mains
isand
still
power
the
available,
mains
is still
power
available,
is√ still
available,
√
√�����
10
Surge Protection
tion
Protection
Features
O
10000
50/60Hz
DC
1000
}
O
10000
50/60Hz
DC
LONG DELAY
CODE: AS
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
10
1
0.1
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
10
1
O
0.01
10000
400
500
600
700
800
900
1000
1100
}
LONG DELAY
CODE: CS
TRIP TIME IN SECONDS
50/60Hz
DC
1000
300
400
NOTE: 6 x INRUSH
100
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
10
100
10000
10
1000
1
100
0.1
1
0.01
0.1
0.001
100
125
150
500
600
100
125
150
200
300
400
500
600
700
800
900
1000
1100
50/60Hz
DC
800
900
1000
1100
1200
}
LONG DELAY
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
10
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
1
0.1
0.01
300
400
500
600
700
800
900
1000
1100
0.001
1200
PERCENT OF RATED CURRENT
50/60Hz
DC
200
100
1000
300
400
500
600
}
NOTE: 6 x INRUSH
LONG DELAY
CODE: CS
700
800
900
1000
1100
1200
400
500
600
700
800
900
50/60 Hz
DC
}
1000
1100
1200
PERCENT OF RATED CURRENT
LONG DELAY
CODE: OP
1000
100
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
TRIP TIME IN SECONDS
TRIP TIME IN SECONDS
ONDS
300
PERCENT OF RATED CURRENT
150
10
1
0.1
0.01
CHARACTERISTICS AT 25˚C
200
150
10000
100
CHARACTERISTICS AT 25˚C
100
125
0.01
PERCENT OF RATED CURRENT
0.001
LONG DELAY
CODE: BS
10
1
0.1
200
}
NOTE: 8 x INRUSH
1000
100
CODE: OP
0.001
1200
10000
LONG DELAY
CODE: AS
700
TYPICAL TIME/CURRENT
50/60 Hz
DC AT 25˚C
CHARACTERISTICS
10000
0.001
}
NOTE: 8 x INRUSH
PERCENT OF RATED CURRENT
150
CHARACTERISTICS AT 25˚C
10000
200
100
125
1000
0.01
es Features
50/60Hz
DC
0.001
1200
PERCENT OF RATED CURRENT
TRIP TIME IN SECONDS
300
TRIP TIME IN SECONDS
200
100
125
150
TRIP TIME IN SECONDS
TRIP TIME IN SECONDS
CHARACTERISTICS AT 25˚C
O
0.1
0.01
0.001
LONG DELAY
CODE: BS
100
TRIP TIME IN SECONDS
TRIP TIME IN SECONDS
100
}
NOTE: 8 x INRUSH
1000
NOTE: 8 x INRUSH
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
10
1
0.1
0.01
100
125
150
Surface Clip
200
300
400
500
600
700
PERCENT OF RATED CURRENT
800
900
1000
1100
1200
0.001
200
100
150
300
400
500
600
700
PERCENT OF RATED CURRENT
800
900
1000
1100
1200
DATA
SHEET
CBE Range
Principle of the Hydraulic Magnetic Breakers
Armature
Pole
Oil
Trip Latch
Trip
Trip
Core
Spring
Tube
Frame
Coil
1
2
3
4
Hydraulic Magnetic Circuit
Breakers (HMCB) operate on
the magnetic force produced
by a load current flowing
through a series connected
solenoid coil which is wound
around an hermetically sealed
tube containing an iron core,
a spring and dampening
fluid.
During this movement, the
hydraulic fluid regulates the
cores speed of travel, thereby
creating a controlled time
delay which is inversely
proportional to the magnitude of the current. This time
delay is useful in that if the
overload is of short duration,
i.e. start up of motors, etc,
the core returns to its rest
position once the overload
disappears.
If the overload persists, the
core reaches the pole piece
after a time delay particular to
that current and in so doing,
the reluctance of the
magnetic circuit drops
considerably, so that the
armature is attracted to the
pole face with sufficient force
to collapse the latch mechanism (toggle) and consequently trip the breaker.
With high values of overloads
or short circuit, the magnetic
flux produced by the coil is
sufficient to attract the
armature to the pole face and
trip the breaker even though
the core has not moved. This
is called the instantaneous trip
region of the circuit breaker
characteristic.
At currents below the circuit
breaker rating, the magnetic
flux in the solenoid is
insufficient to attract the core
towards the pole piece due to
the spring pressure.
QU
Where anoverload occurs, i.e.
currents above the circuit
breaker rating, the magnetic
flux in the solenoid produces
sufficient pull on the core to
commenceits movement
toward the pole piece.
TE
The contacts separate, the
current ceases to flow, and
the core returns to its rest
position.
A L IT Y
Q
CH
N OLO G
Unlike thermal circuit
breakers, the hydraulic
magnetic circuit breaker’s trip
point is unaffected by ambient
temperature. After tripping,
the breaker may be re-closed
immediately since there is no
cooling down time necessary.
By the nature of theprinciple
of operation, it is possible to
obtain any variation of
time/current characteristic.
Y
Features
- Circuit breakers can carry 100% of rated current independent of ambient temperature.
- Trip point not affected by ambient temperature—suitable for mounting into small enclosures.
- Immediate resetting after trip.
- Any current rating possible.
- Large range of time delays available.
3
����
�����
��� �����
�������������������������������
� �����������������������������
� ��������������������
� ����������������������������������� �����������������������
��������������������������������
� �������������������������������������������������
� �����������������������������
� ����������������������� ����������������������������������
��������
�
�
�
�
�
�
�
�
�
�
������������
������������������
��������������
���������������������������
���������������������
����������������
����������������
��������������������������
�������������������������
��������������������
��� �����
��������������
���������������
������������
���������
���������������
���������������
��������������
���������������������
����� ������������
�� �
��������������
���������������������
��������������
��������������
���������������
��������������
���������������
��������������
����������������
���������������������������
���������������
��� ����������
�� �
��������������
���������������������
��������������
��������������
���������������
��������������
����������������
��������������
���������������
��������������������
�
������
����������
��������������
��������������
���������������
��������������
���������������
���� �����
�����
��
��
��
���������������������������
��������������������
������
�������
�������
�������
�������
�������
�������
����
��
����
��
���
���
��
����
��
���
���
��
����
�
����
��
���
���
��
����
���
����
���
��
����
�
����
���
����
���
��
����
���
����
����
����
�����
��
�����
���
�����
����
����
�����
���
�����
���
�����
����
����
������
���
������
����
������
�����
�����
�����
�����
������
����
�����
�����
�����
������
�����
������
����
�����
����
4
����
�����
��� �����
�������������������������������
���������
�������� ����������������
�������� ��������
�������� ��� ��������
�������� �������
�������� �����������
�������� �������
�������� ��������������������
�������� ������� ���������
������������������
�������� ������������������������
������������
����
��
��
��
��
��
��
��
����
�
�
�
�
�
�
�
�
����
�
�
�
�
�
�
�
�
�
����
�
�
�
�
�
�
����
�
�
�
����
�
�
�
�
�
�
����
�
�
�
�
�
����
�
�
�
�
�
�
����
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�����������
����������� �������������
����������� �������������
����������� ������������
����������� �������������
����������� ������ �������������
����������� ��������������������
����������� ����������������
�����������
������������
��������������������
������������������������������������������������
���������������������������������������������
��������������������������������������������������
�����������������������������������������������
��������������������
����������������
�����������
����������������� �������������
����������������� �������������
����������������� ��� ����������������
����������������� ��� ����������������
����������������� ������������������������
����������������� ������������������������
�����������������������
������������������������
���������������
�����������
�����
�����
��������������
����
���������������
���������������
�����������
��
��
�������
�����������
������
�����������
����������������������������
����������������������������
���������������������������
���������������������������
�����������
��������������
����������������������������
����������������������������
�����������������������������
�����������������������������
�����������
������������������
������������������
����������������������
������������������������
��������������
�����������������
�����������
������������������������������
������������������������������
���������������������������
����������������������������
����������������������������
����������������������������
����������������������
����������������������
�������������������
��������������������
��������������������
��������������������
��������������
�����������������
��������
��������
���������������������������������������������������������������
���������������������������������������������������������������
��������
�������� ���� ������
�������� ���� ������
�������� ���� ������
�������� ���� ������
��������
��������
���������������� �������
���������������� �������
��������
���������������
����
��������
��������������������������
��������������������������
��������
�������������������������������������������
��������������
��������������� ����������������������
������������
������������� ����������������������
��������
��������
5
����
�����
��� �����
�������������������������������
���������
��������� ��������������
������������������
�����
��������� ��������������������
�������
��������� ����������������
��������� ���������
��������� ������������
����
��
��
��
��
��
��
��
��
��
��
��
��
��
���
��
��
����
����
����
����
����
����
����
����
����
����
����
����
����
����
����
����
����
����
����
����
����
����
�
�
�
����
�
�
������
�����������
���������
����������������������������
��������
������������������
��������
����������������
���������
�������������������������������
���������
������������������������������
��������
�����������������
��������
�����������������
���������
�������������������������������
���������
�����������������������������
��������
������������������
��������
����������������
���������
�������������������������������
��������
�������������
���������
��������������������������
���������
������
���������������
�����������
����
���
�����
���
���������
�����������
����������������������
�������������������
��������������������
��������������������������
��������������������������
�������������������
�������������������
���������������
����������������
����������������
�����������������
������������������
��������������
�����������������
�����������
�������� �������
������������
��������
�����������
���
��������������
���������������
������
�������
������
�������
������
�������
������
�������
������
�������
������
�������
����
����
��������������
��������
��������
��������
��������
��������
��������
For Options not listed please contact Emcomp for assistance
��������������������������������������������������������
������������� ����������������������������������
�������������
�����������������������������������������������
����������������������������������������������
6
�������������������������������
��������������
�������
���������������
�����������
������������
���
���������������������
������������
����������������������������
���������������������������������
��������������������
������������������
��
���������
����������
�����
��
�����������
������
�� �����
��������������
����
������
��
��
�������
�������
���
�
������
����
�����
����������������������
������
����������
�����������
�������
���
����������
�����������
��������������������
������������������
����
���
� ������������������
������
������
��
�
��������������
����������
��
������
�����
����
�
� ���������������������������
���
���
������
� ���������������������
����
������
����������������
������������
� ����������������
������
���
�������������������
����
������������
� ����������������
������
� ��������������������������
� �������������������������
� ��������������������
�������
�������
�������������
��������������
�������������
�����������������
� ��� �����
��
�������
��
������������
����������
������
������
����������
����
���
���
������
����
����������������������
��������
� �����������������������������
� ��������������������
��������������������
� �����������������������������������
�����������������������
���������������
���
��������������������������������
���
������
� �������������������������������������������������
����
������
� �����������������������������
�������
����
����
����
���
� �����������������������
����� ����������������������������������
������
������������
����
�����
������
�
���
��������
����������
����������
�������
����
����������
�����������
������������
�����������
������������
������
������
�
��
�����
������
�
�
��������������
���
���������������
����������
����
���������������������������
���
���������������
����
���� �����
�����
������
����������
�������
�������
������������
��
������������� �����������
�������
�������������������������������
�������
��������������������
��
�������
����
�����������������
�������
����
���������������
�������
��������������������
��������
��������������������
������������
�����
�������������
���������������
�����
������
��������
���������
������������������������
������������� ������������� �������������
�����
��������� ���������
���������
���������
�����
������������ ������������ ������������
���������������������������
��������������������
����
����
����
����
����
����
����
����
�����
�����
�����
��
��
��
���
���
�����
����� ���������������
������
�����
������
���� �������
���
���
�� ���
��
��
������������ ���
�����
�����
�� �������������������������������
���
���
���� ������������������������������
����
�����
����������������������������������
������
������
������
��� ������������������������
��
��
� ��������������������������
��� partner
��� for CBI
�����������������������������������������
����
����
����
Your
products
��� �����������������
����
����
���� ������������������
����
�����
����������������������������
������
�����
�����
����
����������������
����
������������������
����
������������������
Phone:
��Emcomp International
�
��� AB ���
���� +46 (0)581-621550
����
����
�����
�����
����
����
���������������
����
����������������
����
�����������������
Fax: +46 (0)581-621560
Box
7
�������
��������������������������
�������
����������������������
�������
�����������������������
www.emcomp.se
SE 71041 FELLINGSBRO
�������� ����������������������������
�������� �������������������
�������� �������������������
Sweden
CBI@emcomp.se
����������������������������������������������
��
����������
����
����������������������������������������
�
�������������
��������������
����������
��������������������
���������������������������������������
�� �
�
������������
��������������
������
������������������������������
������������
����
��������������������������
���������������������
����������
����
��������������������������
����
������
���������������������������
��������������
��������������
��������������
��������������
���������������������������
��������������������������
���������������
���������������
��������������
����������������
��������������
��������������
�������
����
������������
����
���������������
�������������
������������
�� ������������
��������������
�� �
��������������
���������������������
�����������
������
������
��������������
��������������
��������
��
���������������
��������������
���������������
������
��������������
�������
���������������� �����
������������
���������
���������������
���������������
��������������
���������������������
������������
������������
�������������
����
���������
�������
�����
����
�����
�������������
����
������������
������������
����������������������
������������
����
����
�����
�����
��� �����
7
C-Frame Series Circuit Breakers
Features
-
Hydraulic-Magnetic Technology
100% Rating Capability Independent of Ambient Temperature
Up to Six Poles
cULus, cURus, VDE and CE Approved
Optional Trip Alarm and Auxiliary Switch
Optional Mid Trip Indication
Wide Range of Circuits, Mountings,Terminations and Time Delays Available
Two Colour Handle Indication (Two Tone Flush Rocker)
Motor Starting Applications to 30A
Applications
-
-
Telecoms DC Power Distribution
UPS Equipment
Mobile Power-Generation Equipment
Power Conditioning Equipment
Alternative Energy Equipment
Lighting Control
Marine Protection
Technical Data
Product Type
Circuit Breaker
Approvals
Number of Poles
Operating Voltages
Current Ratings
Interrupting capacity
Circuit Breaker
cULus 489(1)
1, 2
120 V AC, 120/240V AC
0.05 – 20A
5kA
Product Type
UL489A
1,2
80V DC
0.05 – 50A
5kA
Circuit Breaker
Approvals
Number of Poles
Operating Voltages
Current Ratings
Interrupting capacity
Vibration Resistance
Shock Resistance
Operating Temperature Range
Notes:
Preferred
Standard
Delays
Circuit Breaker
10000
100
}
LONG DELAY
CODE: AS
50/60Hz
DC
}
LONG DELAY
CODE: BS
1000
100
TYPICAL TIME/CURRENT
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
TRIP TIME IN SECONDS
TRIP TIME IN SECONDS
Circuit Breaker
Circuit Breaker
1000
10
1
0.1
0.01
CHARACTERISTICS AT 25˚C
10
1
0.1
0.01
100
200
125
300
400
500
600
700
800
900
100
1100
0.001
1200
100
125
PERCENT OF RATED CURRENT
150
200
300
400
500
600
700
50/60Hz
DC
}
LONG DELAY
CODE: CS
800
900
100
1100
1200
PERCENT OF RATED CURRENT
150
10000
10000
50/60Hz
DC
}
LONG DELAY
CODE: OP
1000
1000
100
100
TYPICAL TIME/CURRENT
TRIP TIME IN SECONDS
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
10
1
0.1
CHARACTERISTICS AT 25˚C
10
1
0.1
0.01
0.01
0.001
Circuit Breaker
cURus(2), CE,VDE (EN60934)
1 – 6 cURus / 1 – 4 VDE
240V AC
0.05 – 50A
2 kA & 5kA(3)
cURus(2), UL1500
cURus(2), UL1500
cURus(4)
1
1,2
1–3
65V DC
120V AC, 120/240V AC
80V DC, 240V AC, 277V AC
0.05 – 50A
0.05 – 50A
0.05 – 50A
1.5kA
1.5kA
–
10G to MIL-STD-202F Method 204D Test A
100G to MIL-STD-202F Method 213B Test A
-40OC to +85OC
(1)
UL489 & CSA 22.2 No 5-02, (2)UL1077 & CSA 22.2 No 235-M89, (3)5kA with back up fuse, (4)UL508 & CSA 22.2 No 14-M9
50/60Hz
DC
0.001
Circuit Breaker
cURus(2), CE,VDE (EN60934)
1,2
80V DC
0.05 – 50A
7.5kA cURus / 4kA VDE
cURus(2)
1
277V AC
0.05 – 30A
2kA & 5kA(3)
10000
TRIP TIME IN SECONDS
DATA
SHEET
CBE Range
0.001
100
125
150
200
300
400
500
600
700
800
PERCENT OF RATED CURRENT
900
100
1100
1200
200
100
150
300
400
500
600
700
800
PERCENT OF RATED CURRENT
900
100
1100
1200
8
DATA
SHEET
CBE Range
C-Frame Series Circuit Breakers
Long Code
Group 0: Frame
Group 1: Type
Group 2: Mounting
Group 3: Handle or Pole Blank
(Reduced Handle)
Group 4: Main Terminal
Description
Group 5: Number of Poles
Group 6: Rated Voltage and
Frequency
Group 7: Time Delay
(For details of time delay refer to the
application guide or web site)
Group 8: Main Circuit Current
(Example only, any ampere rating
possible)
Group 9: Circuit Configuration
Code
C
Code
A
B
G
Code
3
B
2
C
S
P
Z
Code
A
B
C
H
M
Y
2
5
6
Z
Code
AX
CX
21
22
31
32
41
42
51
52
61
62
4X
PX
4P
ZZ
Code
1
2
3
4
5
6
Code
J
K
N
E
S
Q
R
M
L
Z
Code
AS
A1
AH
AE
BS
BI
BH
BE
CS
CI
CH
H3
Code
050M
0100
1000
1500
5000
XXXX
Code
AX
BX
CX
DX
EX
FX
GX
HX
JX
KX
LX
ZZ
Description
C-Frame
C-Frame CR
C-Frame Mark IV
C-Frame Mark IV UL 1500
Description
Description
Snap-in mount edges beveled
Snap-in mount edges flush
Front mount round aperture
Front mount round aperture, dome
Front mount rectangular aperture flush rocker handle type
PCB mount
Special specify
Description
Standard handle
Short handle
Cut off handle
Flush rocker handle
Two tone flush rocker handle
No handle, Blank front plate
Standard handle, mid trip
Flush rocker handle, mid trip pull to reset
Two tone flush rocker handle, mid trip pull to reset
Special specify
Description
M5 or 10-32 stud
Rear quick connect terminal (0.8mm X 6.35mm)
Screw terminal, Bus connected (M4 or 8-32)
Screw terminal, Bus connected (M5 or 10-32)
Screw terminal, Upturned ears (M4 or 8-32)
Screw terminal, Upturned ears (M5 or 10-32)
300 Bent screw terminal, Bus connected (M4 or 8-32)
300 Bent screw terminal, Bus connected (M5 or 10-32)
300 Bent screw terminal, Upturned ears (M4 or 8-32)
300 Bent screw terminal, Upturned ears (M5 or 10-32)
Marine screw terminal (M4 or 8-32)
Marine screw terminal (M5 or 10-32)
M5 flush rear screw terminal
PCB terminal
Plug-in terminal ø3.91mm x 19.05mm)
Special specify
Description
Code
Description
A
1 pole imperial
1 pole metric
B
2 pole imperial
2 pole metric
C
3 pole imperial
3 pole metric
D
4 pole imperial
4 pole metric
E
5 pole imperial
5 pole metric
F
6 pole imperial
6 pole metric
Description
240V 50/60Hz
277V 50/60Hz
80V DC
65V DC
120/240V 50/60Hz
240/415V 50/60Hz
277/480V Hz
80V DC / 240V 50/60z
80V DC / 277V 50/60Hz
Special specify
Code
Description
System
Pulse Tolerance
CE
AC or DC 8 x In
Long delay
US
AC or DC 20 x In
AS & inertia wheel
OP
20 x In
AC
Long delay, high inrush
AD
35 x In
AC
AH & inertia wheel
BD
AC or DC 8 x In
Medium delay
CD
AC or DC 20 x In
BS & inertia wheel
AW
20 x In
Medium delay, high inrush AC
BW
35 x In
AC
BH & inertia wheel
CW
AC or DC 6 x In
Short delay
OX
AC or DC 15 x In
CS & inertia wheel
ZZ
15 x In
AC
Short delay, high inrush
AC or DC 6 x In
Short delay
Description
50mA
1A
10A
15A
50A
Not applicable
Description
Switch
Series trip
Relay trip Current sensing, centre terminal construction
Relay trip Voltage sensing, centre terminal construction
Shunt trip current sensing, 3rd terminal close to load side
Shunt trip voltage sensing, 3rd terminal close to load side
Dual control shunt trip construction, 3rd terminal close to load side
Dual control - relay trip construction (4 terminal)
Switch with auxiliary switch
Series trip, with auxiliary switch
Series trip, with trip-alarma
Special specify
Comments
Comments
UL Recognized VDE (60934) approvals only
UL Recognized approvals only
Comments
figure 1.1
figure 1.2
figure 1.3
figure 1.4, required for UL listed products, Mark IV only
figure 1.5, available on C-Frame Mark IV only
figure 1.6, with PCB mount terminals only
See
See
See
See
See
See
Comments
See figure 2.1; for mountings 3, B, 2, C
See figure 2.2; for mountings 3, B, 2, CR only
See figure 2.3; for mountings 3, B, 2, C Only 1 handle per Unit
See figure 2.4; for mounting S, Mark IV Only 1 handle per Unit
See figure 2.5; for mounting S, Mark IV Only 1 handle per Unit
For reduced handle version, on pole(s) without handle
See figure 2.6; for mountings 3, B, 2, C, Mark IV only
See figure 2.7; for mounting S, Mark IV Only 1 handle per Unit
For mounting S; Mark IV Only 1 handle per Unit
See
See
See
See
See
See
See
See
See
See
See
See
See
See
See
figure
figure
figure
figure
figure
figure
figure
figure
figure
figure
figure
figure
figure
figure
figure
Comments
3.1; 50A max. Mark IV only
3.2; 25A max.
3.3; 40A max.
3.3; 50A max.
3.4; 40A max.
3.4; 50A max.
3.5; 40A max.
3.5; 50A max.
3.6; 40A max.
3.6; 50A max.
3.7; 40A max.
3.7; 50A max.
3.8; 50A max.; Mark IV only
1.6 50A max.; CR and Mark IV are different
3.9; 50A max.; Mark IV only
Note
CR four pole max.
Common bus at 240V
Common bus at 277V
Mark IV only
Comments
3 wire centre tap supply, 120V per phase, Mark IV only
3 Phase multi wire system, Mark IV only
3 Phase multi wire system
AC/DC version only with AC and DC curves, Mark IV only
AC/DC version only with AC and DC curves, Mark IV only
Description
CH & inertia wheel
Ultra short time delay
Instantaneous trip
Long delay, Dual rated
Medium delay, Dual rated
Short delay, Dual rated
AD & inertia wheel, Dual rated
BD & inertia wheel, Dual rated
CD & inertia wheel, Dual rated
Switch
Special specify
System
AC
AC or DC
AC or DC
AC and DC
AC and DC
AC and DC
AC and DC
AC and DC
AC and DC
Pulse Tolerance
35 x In
None
None
8 x In
8 x In
8 x In
20 x In
20 x In
15 x In
No current, for series voltage trip poles
Comments
30A max for the sensing coil; total current 50A max
Total load 50A maximum
Voltage coil normally at line voltage; No AH, BH, CH, AE, BE, CE
No AH, BH, CH, AE, BE, CE
Requires Auxiliary switch
Requires Auxiliary switch
Trip alarm requires mid trip handle and Auxiliary switch
9
DATA
SHEET
CBE Range
C-Frame Series Circuit Breakers
Long Code
Group 10: Auxiliary and Alarm
Switches
Group 11: Dual control/ Relay trip
Voltage and Current
coil ratings
Group 12: Terminals for Shunt,
Relay and Dual control
construction
(CR only code X)
Group 13: Voltage for Illuminated
Rocker
Group 14: Terminal for
Illuminated Rocker
Group 15: Handle colour
Code
A
B
X
Z
Code
A4
A5
B0
B1
B2
B3
Code
A
B
C
X
Z
Code
Description
One change over gold tips, equally spaced terminals
One change over silver plated tips, equally spaced terminals
Not applicable
Special specify
Description
Code
Description
C1
20mA
110-125V AC 50/60Hz
C2
100mA
220-240V AC 50/60Hz
C3
1A
12V DC
XX
Not applicable
24V DC
Special specify
ZZ
48V DC
80V DC
Description
M4/8-32 screw terminal
M5/10-32 screw terminal
Quick connect terminal
Not applicable
Special specify
Description
X
Code
Not applicable
X
Code
Not applicable
G
W
B
4
Y
R
W
B
G
Group 16: Handle Marking
Group 17: Handle Orientation
Group 18: Front plate colour and
marking options
Group 19: Inter-phase barrier and
terminal cover
Group 20: Approvals and typical
safety marks
(Standard marks and approval basket
covers most regions)
Group 21: Optional safety marks
W
R
G
X
Z
Code
A
B
C
D
E
F
G
H
X
Z
Code
V
H
1
2
X
Z
Code
B
2
Z
Code
A
C
X
Z
Code
1
2
3
4
Z
A
X
Code
C
X
Z
Comments
Comments
Figure 12.1; 40A max.
Figure 12.1; 50A max.
Figure 12.3; 25A max.
Only option for CR
Note
Description
Description
For toggle handle type
Green with white marking
White with black marking
Black with white marking
Blue with white marking
Yellow with black marking
Red with white marking
For flush rocker handle
White (On) / white (Off) black marking
Black (On) / black (Off) white marking
Green (On) / red (Off) white marking
For two tone rocker handle
Black face / white indicator + marking
Black face / red indicator + marking
Black face / green indicator + marking
No handle
Special specify
Description
No marking
I-0
ON - OFF
I - 0 and ON - OFF
Ampere rating
I - 0 and ampere rating
ON-OFF and ampere rating
I-0 and ON-OFF and ampere rating
No Handle
Special specify
Description
Vertical
Horizontal
Vertical 2
Horizontal 2
No handle
Special specify
Description
Black front plate no marking
Black front plate no marking, with test button for mechanical trip
Special specify
Description
Small inter-phase barrier
Z Inter-phase barrier
Not applicable
Special specify
Description
UL recognized, CSA,VDE
UL Listed, CSA,VDE
UL Listed (UL489A), VDE
UL recognized, CSA
No approvals
UL recognized, only
Special specify
CCC Mark
Not applicable
Special specify
Comments
0.02 to 0.1A and 30V max.
Standard
No microswitch - Flat base plate
Description
Note
The coding is dependent on the type of handle. For all
handles excluding the flush rocker and two tone flush rocker
handles, the colour code describes the colour of the handle.
For the flush rocker handle the colour code describes the
colour of the on and off actuation buttons by a single code.
The two tone handle, the colour code describes the
indication colour. The face colour is black and the indicator
indicates the off or tripped position (see figure 2.6).
After selecting the appropriate colour code select the
marking code, the marking colour of the two tone handle is
equivalent to the indicator colour. After selecting the
appropriate marking the orientation of print may be
specified. For the toggle handle types only codes V and H are
applicable (see figure 17.1). If the pole has no handle
because of it being a reduced handle version use code XXX.
Comments
See
See
See
See
figure
figure
figure
figure
17.1
17.1
17.1
17.1
Comments
Test button is standard on rocker handle version, on the switch
version the button is nonfunctioning and black in colour
Comments
Interphase barriers may be required for multi-pole
products that have UL approvals. Contact your nearest
CBI sales office for assistance.
Comments
Comments
Required for products exported to Peoples Republic of China
Only required in specific cases where import into the
country is prohibited,unless the product carries the mark.
For
notnot
listed
please
contact
Emcomp
ForOptions
Options
listed
please
contact
CBI for
forassistance
assistance
Example code: C-ASM4XBEBS2000AXX-XXXXXWHHBCZC
10
�������������������������������
C-Frame Series Circuit Breakers
4-POLE
PANEL CUTOUT DETAIL
(PANEL THICKNESS 1.0-3.2)
4-POLE
PANEL CUTOUT DETAIL
(PANEL THICKNESS 1.0-3.2)
M3 or 6-32
insert
Ø 3.5 (M3)
Ø4.0 (6-32)
M3 or 6-32
insert
PANEL CUTOUT DETAIL
15.5
66.0
66.0
55.5
55.5
38.6
1-POLE
19.2
38.4
57.6
4-POLE
76.8
1-POLE
19.2
2-POLE
38.4
3-POLE
4-POLE
57.6
50.8
42.2
38.6
81.2
2-POLE
3-POLE
76.0
50.8
42.2
42.2
Ø16.0
19.0
19.0
19.0
38.0
57.0
76.8
TOLERANCES
(+0.2)
TOLERANCES
(+0.2)
�
Figure 1.2
�������� Figure 1.1
6.5
PANEL CUTOUT DETAIL
M3 or 6-32
insert
Ø 3.5 (M3)
Ø4.0 (6-32)
19.2
5.1
6.5
OFF
32.0
3.3
11.3
15.2
10.2
3.3
MARK IV
CR
17.7
42.2 56.3
42.2
�����������������������������
Figure 1.4
Figure 1.3
� ��������������������
� ����������������������������������� �����������������������
��������������������������������
� �������������������������������������������������
� �����������������������������
� ����������������������� ����������������������������������
6.5
5.8
MARK IV
OFF
Face colour
13.9
27.8
ON
ON
66.5o
62o
66.5o
Indication colour
3.2
19.0
57.0
Figure 1.5
Figure 2.2
Figure 2.1
Figure 2.3
Figure 2.4
Figure 2.5
6.9
9.5
10.0
�
�
�
�
�
�
�
�
�
�
ON
BREAKER OFF
PULL TO RESET
TEST BUTTON
Figure 2.6
Figure 2.7
M4
8-32
9.5 M5
10-32
7.6 #
7.6
#
��������������
UPTURNED
EARS
������������
* DISTANCE BETWEEN CLAMPING
11.0
2.54 (TYP)
PCB FOOT PRINT
4.3
39.9
2.54 (TYP)
0.8
7.5
LINE
42.2
7.5
38.8
���������������
3.1
54.9
���� �����
�����
Figure 1.6
������
�������
�������
South Africa
��
CBI-electric:
low voltage
�������
Tripswitch Drive Elandsfontein
�������
Gauteng
��South Africa �������
Tel:
+27 11 928 2000
�������
Fax:
+27 11 392 2354
E-mail:
cbi@cbi-electric.com
Website:
www.cbi-electric.com
AUX-SWITCH
OPTIONAL
Ø1.5 (TYP)
(17 OFF)
53.9
6.3
M5
10-32
PLUG-IN HOLE
Ø4.0
±0.1
LINE
#
11.9
30o
Ø3.9
LINE
16.5
# FOR REFERENCE ONLY
11.0
0.8
LINE
#
17.7
6.3
25.3
8.2
���������������
���������������
# FOR REFERENCE ONLY
���
����������
��������������������
Figure 3.7
Figure 3.8
Figure 3.9
�� �
�
��������������
������
���������������������
����������
H
��������������
��������������
��������������
��������������
���������������
���������������
��������������
����������������
��������������
��������������
LINE SIDE
9.9
LOAD SIDE
LINE SIDE
LOAD SIDE
15.9
19.8*
38.8
0.8
19.0
7.5
LOAD SIDE
#
21.0
* DISTANCE BETWEEN CLAMPING
SURFACES
# FOR REFERENCE ONLY
Figure 12.1
20.0
LOAD SIDE
LINE SIDE
V
1
Figure 12.2
���������������������������
��������������������
2
LINE SIDE
Figure 17.1
����
����
����
����
����
����
����
����
�����
�����
Group
��
��
��
���
���
�����
����� A member
������ of the�����
������
���� Germany
���
���
�� USA
��
��
���Australia ���
�����
�����
Heinemann
Electric
(Pty)
Ltd
Circuit
Breaker
Industries
Inc
Circuit
Breaker
Industries
Gmbh
��
���
���
����
����
�����
�����
������
������
������
Springvale
Road Mulgrave
Suite 328���
��� Postfach 101240
�� D-86882 ��
� 35E Uwchlan
���Avepartner
���821
����
����Melbourne����
Your
for
CBI
products
3170 Australia
19341 USA
Germany
��� Landsberg����
����
���� Exton PA����
�����
�����Victoria ������
�����
�����
Tel:
+61 3 9560 3522
Tel:
+91 610 524 9949
Tel:
+49 8191 9472900
Emcomp
International
AB
Phone:
+46
(0)581-621550
��
�
���
���
����
����
����
�����
�����
����
Fax:
+61 3 9562 0420
Fax:
+91 610 524 9945
Fax:
+49 8191 94729011
Fax: +46 (0)581-621560
Box
7
E-mail:
heinelec@heinelec.com.au
E-mail:
info@cbibreakers.com
E-mail:
office@cbibreakers.de
www.emcomp.se
SE 71041 FELLINGSBRO
Website: www.heinemannelectric.com.au
Website: www.cbibreakers.com
Website: www.cbibreakers.com
Sweden
CBI@emcomp.se
11
February 2007 / June Viljoen Print Design Print
��
LINE
7.5 19.4
21.1
Figure 3.3
0.8
M4
8-32
M5
10-32
1.0 (TYP)
���������������������������
SURFACES
7.6
11.0
20.5
5.1
53.9
* DISTANCE BETWEEN CLAMPING
6.35
���������������
TOGGLE HANDLE PC BOARD MOUNTING MARK IV
Ø2.5
3.0 Ø1.2
9.5
����� ������������
Figure 3.6
�� �
��������������
���������������������
��������������
��������������
���������������
��������������
���������������
��������������
����������������
Figure 3.5
1.5
SURFACES
# FOR REFERENCE ONLY
# FOR REFERENCE ONLY
SURFACES
���������Figure 3.4
���������������
���������������
��������������
���������������������
* DISTANCE BETWEEN CLAMPING
LINE
M4
8-32
M5
10-32
#
12.0
39.6*
# FOR REFERENCE ONLY
UPTURNED
EARS
M4
8-32
M5
10-32
12.0#
30o
LINE
39.6*
LINE
34.3
LINE
30o
LINE
M4
8-32
M5
10-32
LINE
#
23.5
9.5
M4
8-32
M5
10-32
4.0
6.35
6.9
9.5
������������������
��������������
���������������������������
���������������������
����������������
����������������
Figure 3.2
Figure 3.1
��������������������������
�������������������������
��������������������
��� �����
6.35
MID-TRIP
PULL
TO RESET
0.8
OFF
10.3*
LINE
38.8
������������
M5
10-32
9.5
34.3
BREAKER ON
BREAKER TRIPPED
INDICATING
ELECTRIC FAULT
42.2
DATA
����
SHEET
�����
���
CBE �����
Range
D-Frame Series Circuit Breakers
Features
-
Hydraulic-Magnetic Technology
100% Rating Capability Independent of Ambient Temperature
Up to Six Poles
cULus,VDE and CE Approved
Ratings up to 250A
Optional Trip Alarm Switch and Auxiliary Switch
Wide Range of Circuits, Mountings,Terminations and Time Delays Available
Optional Mid Trip Indication
Two Colour Handle Indication (Two Tone Flush Rocker)
Applications
-
-
AC and DC Branch Circuit Installations
Telecom DC Power Distribution
UPS Equipment
Mobile Power-Generation Equipment
Power Conditioning
Alternative Energy Equipment
Lighting Control
Marine Protection
Technical Data
Product Type
Circuit Breaker
Approvals
Number of Poles
Operating Voltages
Current Ratings
Interrupting capacity
Product Type
Circuit Breaker
CE,VDE (EN 60947-2)
UL489A, CE,VDE (EN60947-2)
1,2
1, 3 (Parallel)
240V AC, 80V DC
80V DC
0.1-50A(ac) 0.1-100A(dc)
110-250A
5kA
10kA
Switch
Approvals
Number of Poles
Operating Voltages
Current Ratings
Interrupting capacity
Vibration Resistance
Shock Resistance
Operating Temperature Range
Circuit Breaker
Circuit Breaker
cULus 508, CE, VDE (EN60947-3)
cURus 1077
CE,VDE (EN 60934
1, 2
1 to 6
1 to 4
120V AC, 120/240V AC
80V DC, 277V AC, 277/480 V AC
80V DC, 240V AC, 240/415V AC
50A
0.02-100A (1p), 0.02-70A (2-6p)
0.01-100A (qp), 0.1-70A (2-4p)
2kA ac, 5kA dc
3kA ac, 5kA dc
600 A (For 1 sec)
10G to MIL-STD-202F Method 204D Test A
100G to MIL-STD-202F Method 213B Test A
-40OC to +85OC
10000
50/60Hz
DC
1000
}
10000
50/60Hz
DC
LONG DELAY
CODE: AS
LONG DELAY
CODE: BS
100
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
TRIP TIME IN SECONDS
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
10
1
0.1
10
1
0.1
0.01
0.001
}
NOTE: 8 x INRUSH
1000
NOTE: 8 x INRUSH
100
TRIP TIME IN SECONDS
0.01
200
100
125
300
400
500
600
700
800
900
1000
1100
0.001
1200
PERCENT OF RATED CURRENT
150
10000
50/60Hz
DC
1000
100
125
200
300
400
}
500
600
700
800
900
50/60 Hz
DC
}
10000
LONG DELAY
CODE: CS
100
1100
1200
LONG DELAY
CODE: OP
1000
NOTE: 6 x INRUSH
1000
PERCENT OF RATED CURRENT
150
100
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
TRIP TIME IN SECONDS
Preferred
Standard
Delays
Circuit Breaker
cULus 489
1, 2
120 V AC, 80V DC, 120/240V AC
0.1-80A ac, 100A dc(1p), 0.1-50A(2p)
10kA, 5kA(2p)
TRIP TIME IN SECONDS
DATA
SHEET
CBE Range
10
1
0.1
TYPICAL TIME/CURRENT
CHARACTERISTICS AT 25˚C
10
1
0.1
0.01
0.01
0.001
0.001
100
125
150
200
300
400
500
600
700
PERCENT OF RATED CURRENT
800
900
1000
1100
1200
200
100
150
300
400
500
600
700
PERCENT OF RATED CURRENT
800
900
1000
1100
1200
12
DATA
SHEET
CBE Range
D-Frame Series Circuit Breakers
Long Code
Group 0: Frame
Group 1: Type
Group 2: Mounting
Group 3: Handle or Pole Blank
(Reduced Handle)
Group 4: Main Terminal
Description
Group 5: Number of Poles
Group 6: Rated Voltage and
Frequency
Group 7: Time Delay
(For details of time delay refer to the
application guide or web site)
Group 8: Main Circuit Current
(Example only, any ampere rating
possible)
Group 9: Circuit Configuration
Group 10: Auxiliary and Alarm
Switches
Code
D
Code
1
2
Code
A
B
D
S
Z
Code
A
B
C
D
E
H
M
W
2
5
6
Z
Code
AX
BX
CX
MX
2X
3X
4X
VI
W1
XX
ZZ
Code
1
2
3
4
5
6
Code
J
K
N
S
Q
R
M
L
Z
Code
AS
A1
AH
AE
BS
BI
BH
BE
CS
CI
CH
H3
Code
050M
0100
1000
5000
K100
XXXX
Code
AX
BX
CX
DX
EX
FX
GX
HX
JX
KX
LX
ZZ
Code
A
B
M
X
Z
Description
D-Frame
D-Frame D – Type
D-Frame DD –Type
Description
Description
Front mount rectangular aperture toggle handle type
Snap-in mount edges flush
Centre lock mounting
Front mount rectangular aperture flush rocker handle type
Special specify
Description
Standard handle
Short handle
Cut off handle
Paddle handle
Baton handle
Flush rocker handle
Two tone flush rocker handle
No handle, Blank front plate, D-frame type
Standard handle, mid trip
Flush rocker handle, mid trip pull to reset
Two tone flush rocker handle, mid trip pull to reset
Special specify
Description
M5 or 10-32 stud
Clamp terminal M3 or 6-32
Rear quick connect terminal (0.8mm X 6.35mm)
M6 or 1/4-20 stud terminals
Plug in terminal (Ø6.25mm X 21.5mm)
Plug in terminal (Ø7.80mm X 21.5mm)
M5 or 10-32 flush rear screw terminal
Bridge terminal for 2 pole parallel construction
Bridge terminal for 3 pole parallel construction
No Terminal
Special specify
Description
Code
Description
A
1 pole imperial
1 pole metric
B
2 pole imperial
2 pole metric
C
3 pole metric
3 pole imperial
D
4 pole imperial
4 pole metric
E
5 pole metric
5 pole imperial
F
6 pole imperial
6 pole metric
Description
240V 50/60Hz
277V 50/60Hz
80V DC
120/240V 50/60Hz
240/415V 50/60Hz
277/480V Hz
80V DC / 240V 50/60z
80V DC / 277V 50/60Hz
Special specify
Code
Description
System
Pulse Tolerance
CE
AC or DC 8 x In
Long delay
US
AC or DC 20 x In
AS & inertia wheel
OP
20 x In
AC
Long delay, high inrush
AD
35 x In
AC
AH & inertia wheel
BD
AC or DC 8 x In
Medium delay
CD
AC or DC 20 x In
BS & inertia wheel
AW
20 x In
Medium delay, high inrush AC
BW
35 x In
AC
BH & inertia wheel
CW
AC or DC 6 x In
Short delay
OX
AC or DC 15 x In
CS & inertia wheel
ZZ
15 x In
AC
Short delay, high inrush
AC or DC 6 x In
Short delay
Description
50mA
1A
10A
50A
100A
No current, for voltage trip poles
Description
Switch
Series trip
Relay trip Current sensing, centre terminal construction
Relay trip Voltage sensing, centre terminal construction
Shunt trip current sensing, 3rd terminal close to load side
Shunt trip voltage sensing, 3rd terminal close to load side
Dual control shunt trip construction, 3rd terminal close to load side
Dual control - relay trip construction (4 terminal)
Switch with auxiliary switch
Series trip, with auxiliary switch
Series trip, with trip-alarm
Special specify
Description
One change over gold tips, equally spaced terminals
One change over silver plated tips, equally spaced terminals
Integrated micro switch housing, silver tips
Not applicable
Special specify
Comments
Comments
UL Recognized approvals only
UL Listed and UL recognized approvals
Comments
See figure 1.1
See figure 1.2, available on D-Type only
See figure 1.3, available on D-Type only
See figure 1.4, available on DD-Type only
Comments
See figure 2.1; for mountings A, B
See figure 2.2; for mountings A, B; D-Type only
See figure 2.3; for mountings A, B; only 1 handle per unit
See figure 2.4; for mounting D; only 1 handle per unit
See figure 2.5; for mounting D; only 1 handle per unit
See figure 2.6; for mounting S; only 1 handle per unit
See figure 2.7; for mounting S; only 1 handle per unit
For reduced handle version, on pole without handle
See figure 2.8; for mountings A, B
See figure 2.9; for mounting S; only 1 handle per unit
See figure 2.10; for mounting S; only 1 handle per unit
Comments
See figure 3.1; 60A max.
See figure 3.2; 30A max.; D-Type only
See figure 3.3; 25A max.; D-Type only
See figure 3.4; 100A max.
See figure 3.5; 50A max.
See figure 3.6; 100A max.
See figure 3.7; 50A max.; DD-Type only
See figure 3.8 200A max.; DD-Type only
See figure 3.9; 250A max.; DD-Type only
Common bus at 240V
Common bus at 277V
Comments
3 wire centre tap supply, 120V per phase
3 Phase multi wire system
3 Phase multi wire system
AC/DC version only with AC and DC curves
AC/DC version only with AC and DC curves
Description
CH & inertia wheel
Ultra short time delay
Instantaneous trip
Long delay, Dual rated
Medium delay, Dual rated
Short delay, Dual rated
AD & inertia wheel, Dual
BD & inertia wheel, Dual
CD & inertia wheel, Dual
Switch (series V coil)
Special specify
System
AC
AC or DC
AC or DC
AC and DC
AC and DC
AC and DC
AC and DC
AC and DC
AC and DC
Pulse Tolerance
35 x In
None
None
8 x In
8 x In
8 x In
20 x In
20 x In
15 x In
Comments
50A max for the sensing coil; total current 100A max
Total load 100A maximum
Voltage coil normally at line voltage; No AH, BH, CH, AE, BE, CE
No AH, BH, CH, AE, BE, CE
Trip alarm requires mid trip handle
0.02 to 0.1A Max 30V
Comments
Required for parallel bridged DD-Type on last pole. See
figure 3.8 and 3.9
No auxiliary switch - Flat base plate
13
DATA
SHEET
CBE Range
D-Frame Series Circuit Breakers
Long Code
Group 11: Dual control/ Relay trip
Voltage and Current
coil ratings
Group 12: Terminals for Shunt,
Relay and Dual control
construction
Group 13: Voltage for Illuminated
Rocker
Group 14: Terminal for
Illuminated Rocker
Group 15: Handle colour
Code
A4
A5
B0
B1
B2
B3
Code
B
C
E
X
Z
Code
Z
X
Code
Z
X
Code
G
W
B
4
Y
R
W
B
G
Group 16: Handle Marking
Group 17: Handle Orientation
Group 18: Front plate colour and
marking options
Group 19: Inter-phase barrier and
terminal cover
(Interphase barriers and terminal
covers are required for UL listed
Approvals)
Group 20: Approvals and typical
safety marks
(Standard marks and approval basket
covers most regions)
Group 21: Optional safety marks
W
R
G
X
Z
Code
A
B
C
D
E
F
G
H
X
Z
Code
V
H
1
2
X
Z
Code
A
2
Z
Code
A
B
C
1
2
3
4
X
Z
Code
1
2
3
4
A
Z
X
Code
C
X
Z
Description
110-125V AC 50/60Hz
220-240V AC 50/60Hz
12V DC
24V DC
48V DC
80V DC
Code
C1
C2
C3
XX
ZZ
Description
M5/10-32 screw terminal
Quick connect terminal
M5 studs terminal
Not applicable
Special specify
Special specify
Not applicable
Description
20mA
100mA
1A
Not applicable
Special specify
Comments
Figure 12.1; 50A max.
Figure 12.2; 25A max.
Figure 12.3; 60A max.
Description
Description
Special specify
Not applicable
Description
For toggle handle type
Green with white marking
White with black marking
Black with white marking
Blue with white marking
Yellow with black marking
Red with white marking
For flush rocker handle
White (On) / white (Off) black marking
Black (On) / black (Off) white marking
Green (On) / red (Off) white marking
For two tone rocker handle
Black face / white indicator + marking
Black face / red indicator + marking
Black face / green indicator + marking
No handle
Special specify
Description
No marking
I-0
ON - OFF
I - 0 and ON - OFF
Ampere rating
I - 0 and ampere rating
ON-OFF and ampere rating
I-0 and ON-OFF and ampere rating
No Handle
Special specify
Description
Vertical
Horizontal
Vertical 1
Horizontal 2
No handle
Special specify
Description
Black front plate standard marking
Black front plate no marking, with test button for mechanical trip
Description
Small inter-phase barrier
Large inter-phase barrier
Z Inter-phase barrier
Terminal cover(s)
Small inter-phase barrier and terminal cover
Large inter-phase barrier and terminal cover
Z inter-phase barrier and terminal cover
Not applicable
Special specify
Description
UL recognized, CSA,VDE, CE
UL Listed, CSA,VDE, CE
UL Listed (UL489A), VDE
UL recognized, CSA
UL recognized, only
No approvals
Special specify
Description
CCC Mark
Not applicable
Special specify
Note
For illuminated handle versions please contact your nearest
CBI office for assistance.
Note
The coding is dependent on the type of handle. For all
handles, excluding the flush rocker and two tone flush rocker
handles, the colour code describes the colour of the handle.
For the flush rocker handle the colour code describes the
colour of the on and off actuation buttons by a single code.
The two tone handle the colour code describes the
indication colour. The face colour is black and the indicator
indicates the off or tripped position (see figure 2.7).
After selecting the appropriate colour code select the
marking code.The marking colour of the two tone handle is
equivalent to the indicator colour. After selecting the
appropriate marking, the direction of print may be specified.
For the toggle handle types only codes V and H are
applicable (see figure 15.1). If the pole has no handle
because of it being a reduced handle version use code XXX.
Comments
See figure 15.1 The diagram only shows the flush rocker
printing, which has the opposite printing position (ON/OFF)
to other handle types if the breaker needs to be reverse fed
then the printing will be upside down and codes 1and 2
should be selected.
Comments
I-0, ON-OFF and Amp rating
Test button is standard on mid trip rocker handle version
Comments
Interphase barriers and terminal covers may be required
for multi-pole products that have UL listed approvals and
UL recognized approvals. See the application guide for the
D/DD frame for details, or contact your nearest CBI sales
office for assistance.
Comments
For VDE, CE normally IEC/EN60934
For VDE, CE normally IEC/EN60947-2
Comments
Required for products exported to Peoples Republic of China
Only required in specific cases where import into the country is
prohibited, unless the product carries the mark.
For Options
not listed
please
contact
CBI for for
assistance
For Options
not listed
please
contact
Emcomp
assistance
Example code: D-2SM4XBSOX5000AXX-XXXXXWHHBCZC
14
�������������������������������
D-Frame Series Circuit Breakers
M3 OR 6-32
MOUNTING INSERT
19.0
[0.748]
19.0
[0.748]
Ø4.0
[0.157]
19.2
[0.756]
Ø6.0
10.0
[0.394]
M12 x 1
(FINE PITCH)
1/2-32 (UN)
[0.236]
19.2
[0.756]
M3 OR 6-32
MOUNTING
INSERT
Ø4.0
[0.157]
5.2
[0.205]
Ø4.0
[0.157]
16.7 [0.657]
36.8
[1.449]
52.4
[2.063]
[0.748]
19.0
M3 or 6-32
3.5
[0.138]
4.6
[0.181]
77.5
[3.051]
Ø18.0
[0.709]
71.2
[2.803]
42.2
[1.661]
31.8
[1.252]
5
Ø13.0
[0.512]
5.1 FOR METRIC
[0.217] FOR
IMPERIAL
50.7
[1.996]
19.2
[0.756]
Figure 1.1
��������
� �����������������������������
Figure 1.3
Figure 1.4
� ��������������������
� ����������������������������������� �����������������������
��������������������������������
� �������������������������������������������������
� �����������������������������
Figure 2.4
Figure 2.5
Figure 2.6
� ����������������������� ����������������������������������
Figure 1.2
18.5
14.7
24.6
7.1
3.5
14.5
29.6
OFF
POSITION
OFF
O
100
27.0
ON
I
10.7
Figure 2.1
Figure 2.2
Figure 2.3
14.5
OFF
TEST BUTTON
Indication colour
������������
Figure 2.7
I
Indication colour
ALARM
ON
Face colour
TRIPPED
DATA
����
SHEET
�����
���
CBE �����
Range
OFF
O
100
o
ON
I
60A
HANDLE IN MID POSITION
INDICATING BREAKER TRIPPED
Figure 2.8
6.1
±0.5
17.5
11.3
49.3
3.6
9.3
Figure 3.1
Ø6.35
(Ø0.250)
±0.5
FOR Ø6.25 [Ø0.246]
BULLET TERMINAL
17.5
�
�
�
�
�
�
�
�
�
�
TRIPPED
POSITION
Face colour
TEST BUTTON
������������������
Figure 2.9
��������������
���������������������������
���������������������
����������������
����������������
Figure 3.2
��������������������������
�������������������������
��������������������
��� �����
10.1
Figure 2.10
CAPTIVE NUT AND
M4 X 8 OR 10-32
SCREW
10
50*
49.3
* DISTANCE BETWEEN CLAMPING
SURFACES
Figure 3.3
5.7
7.9
Ø7.90
[Ø0.311]
(-0.5)
(-0.5)
21.5
24.5
FOR Ø7.80 [Ø0.307]
BULLET TERMINAL
49.3
49.3
49.3
Figure 3.5
Figure 3.4
��������������
������������
Figure 3.6
External bridge
Internal
bridge
External bridge
Internal
bridge
���������������
���������������
����� ������������
�� �
��������������
���������������������
32.0
��������������
��������������
Figure 3.8
���������������
��������������
���������������
�������������� LOAD
����������������
��� ����������
�� �
��������������
23.2
���������������������
��������������
��������������
���������������
��������������
�
����������������
���
����������
LINE
10.0
3.1*
���������
���������������
49.3
���������������
*
��������������
���������������������
Figure 3.7
M5 or 10-32 SCREW
FLAT AND STAR WASHER
TO CLAMPING SURFACE
���������������������������
LOAD
OFF
POSITION
LINE
50.8
Figure 3.9
LINE SIDE
M5 or 6-32 screw
star washer and flat washer
LOAD
LOAD SIDE
���������������
15.9
LINE
��������������������
#
20.9
�
������
17.2*
����������
TO
* CLAMPING SURFACES
# FOR REFERENCE ONLY
��������������
��������������
Figure 12.1
���������������
H
��������������
LINE SIDE
LOAD SIDE
(±0.5)
25.5
19.0
���������������
16.4
���� �����
�����
Figure 12.2
������
�������
�������
South Africa
��
CBI-electric:
low voltage
�������
Tripswitch Drive Elandsfontein
�������
Gauteng
��South Africa �������
Tel:
+27 11 928 2000
�������
Fax:
+27 11 392 2354
E-mail:
cbi@cbi-electric.com
Website:
www.cbi-electric.com
LOAD SIDE
LOAD SIDE
LINE SIDE
V
1
Figure 12.3 ���������������������������
2
LINE SIDE
Figure 15.1
��������������������
����
����
����
����
����
����
����
����
�����
�����
Group
��
��
��
���
���
�����
����� A member
������ of the�����
������
���� Germany
���
���
�� USA
��
��
���Australia ���
�����
�����
Heinemann
Electric
(Pty)
Ltd
Circuit
Breaker
Industries
Inc
Circuit
Breaker
Industries
Gmbh
��
���
���
����
����
�����
�����
������
������
������
Springvale
Road Mulgrave
Suite 328���
��� Postfach 101240
�� D-86882 ��
� 35E Uwchlan
���Avepartner
���821
����
����Melbourne����
Your
for
CBI
products
3170 Australia
19341 USA
Germany
��� Landsberg����
����
���� Exton PA����
�����
�����Victoria ������
�����
�����
Tel:
+61 3 9560 3522
Tel:
+91 610 524 9949
Tel:
+49 8191 9472900
Emcomp
International
AB
Phone:
+46
(0)581-621550
��
�
���
���
����
����
����
�����
�����
����
Fax:
+61 3 9562 0420
Fax:
+91 610 524 9945
Fax:
+49 8191 94729011
Fax: +46 (0)581-621560
Box
7
E-mail:
heinelec@heinelec.com.au
E-mail:
info@cbibreakers.com
E-mail:
office@cbibreakers.de
www.emcomp.se
SE 71041 FELLINGSBRO
Website: www.heinemannelectric.com.au
Website: www.cbibreakers.com
Website: www.cbibreakers.com
Sweden
CBI@emcomp.se
15
February 2007 / June Viljoen Print Design Print
��
16.4
CBE Range
Q-Series miniature circuit breakers (13 & 18mm module widths)
Product Type
Standard Ampere Ratings (A)
Number of Poles
Rated Voltage (V)
Approvals
&
Interrupt.
Capacity
(kA)
VDE (EN 60947-2)
QA/QF (13)
QF (18)
QZ (13)
QY/QDC (13)
0.1 – 63 (1 pole)
0.1 – 50 (2 poles)
20 – 100 (2p parallel)
0.1 – 63
110 – 150 (3p parallel)
1, 2
1, 2, 3, 1+N, 3+N
1, 2, 3, 1+N, 3+N
2, 3p parallel
2 poles in series
80V DC
240V AC (1p, 1p+N)
120V AC, 1p – (QF only) 240V AC (1p, 1p+N)
120/240V AC, 2p – (QF 240/415V AC (2, 3, 3p+N) 240/415V AC (2, 3, 3p+N) *125V DC (1, 2p & 2p
parallel)
only)
277V AC (1p)
277V AC (1p)
240V AC (1p, 1p+N)
277/480V AC (2, 3p) *250V DC (2p in series)
277/480V AC (2, 3p)
240/415V AC (2, 3, 3p+N)
3kA – (QA)
10kA
3kA (240/415V ac)
6kA (240/415V AC)
6kA – (QF)
√
√
√
√
0.1 – 50 (QA)
0.1 – 25 (QF)
51 – 63A (QA,
No approvals)
1, 2, 3, 1+N, 3+N
0.1 – 60 (UL 1077)
5 – 50 (EN60947-2)
CE
UL489A
10kA (QY only)
5kA (277/480V ac)
cURus (UL1077_CSA) 5kA (120/240V AC) – (QF) 3kA (277/480V AC)
√
√
√
Dual (DIN & Mini Rails)
√
√
√
√
DIN Rail
√
√
√
√
Mounting
Surface Clip
√
Options
Plug-in
1, 2, 3, 9, OP
1, 2, 3, 9, OP
Tripping curves
1, 2, 3, 9, OP
OP, U2, U3, 1, 9
Resistance to shock
IEC 60068-2-27, 5G/30ms half sine wave
Vibration
IEC 77/IEC 60068-2-6, 3G/10-150Hz
Operating temperature
-40°C to +65°C
Optional Accessories
– Aux. switch
– Trip alarm
– Aux. switch + trip alarm
– Shunt trip
– Handle lock
– Bus bar
– Shroud
Features
– Compact 13/18mm module widths
– Hydraulic-magnetic technology
– Precision tripping
– Suitable for isolation
– Temperature independent trip point
– Mid trip handle
* Polarity Sensitive
16
CBE Range
Q-Series miniature circuit breakers (13 & 18mm module widths)
Features
QA/QF(13)
QZ(13)
QY/QDC(13)
-
-
-
AC circuit breakers
cURus Recognized (QF)
VDE, CE Approved
One to four pole units
Current ratings up to 50A
74
(2.91)
DC circuit breakers
VDE, CE Approved
UL 489A Listed (QY only)
One & two pole units
Current ratings up to 150A
80, 125 & 250V dc versions
(250V dc 2 poles in series)
17.9
(0.7)
65
(2.56)
13
(0.51)
60
(2.36)
NOTE: DIMENSIONS IN BRACKETS ARE IN “INCHES”
73
(2.87)
64.8
(2.55)
151 (5.95)
13
(0.51)
63.8
(2.51)
5.0
(0.2)
135 (5.32)
45
(1.77)
57
(2.24)
44
(1.73)
32
(1.26)
DUAL MOUNT
39
(1.54)
96.8 QZ only
(3.81)
92.8
(3.65)
28.5
(1.12)
71.4
(2.81)
19
(0.75)
45
(1.77)
26
(1.02)
25.9
(0.94)
22.5
(0.86)
66
(2.6)
5
(0.2)
AC circuit breaker
cURus recognized
VDE & CE Approved
One to four pole units
Current ratings up to 60A
QY/QDC,
2 & 3 POLES
QY / QDC, 2 & 3 POLES
BRIDGED IN PARALLEL
BRIDGED
IN PARALLEL
DIN RAIL MOUNT
QF(18)
Features
-
AC circuit breaker
UL 1077 Recognized
VDE, CE, CSA certified
One to four pole units
Current ratings up to 63A
68
(2.68)
60
(2.36)
54
(2.13)
72
(2.84)
71.4
(2.81)
85.5
(3.37)
22.5
(0.89)
45
(1.77)
20.25
(0.797)
36
(1.42)
5
(0.2)
19
(0.75)
32
(1.22)
44
(1.73)
63.8
(2.51)
18
(0.71)
18
(0.71)
17
CBE Range
Q-Series miniature circuit breakers (13 & 18mm module widths)
Auxiliary switch and/or Trip alarm switch
Features
- AC and DC voltages
- UL 489 listed
(5A, 250V AC; 0.5A, 80V DC Auxiliary; 0.5A, 125V DC Trip alarm)
- IEC 60947-5-1 approved
(5A, 250V AC; 0.5A, 110V DC Auxiliary; 0.5A, 125V DC Trip alarm)
- Factory fitted
- Compact 6.5mm width
- Attached to right hand side of circuit breaker
- Available on Dual and DIN rail mounting
31.3
(1.23)
26.2
(1.03)
TRIP ALARM Q. CONNECTORS
21.1
(0.83)
5.5
(0.22)
0.5
(0.02)
57.0
(2.24)
45.0
(1.77)
(N/O)16
(N/C)18
(C)15
20.1
(0.79)
2
(0.08)
30.3
(1.19)
25.2
(0.99)
(N/O)16
(N/C)18
(C)15
6.5
(0.256)
14(N/O)
12(N/C)
7
(0.28)
2.8
(0.11)
11(C)
14(N/O)
11(C)
12(N/C)
AUX SWITCH Q. CONNECTORS
9.7
(0.38)
31.9
(1.26)
21.3
(0.84)
DIN RAIL MOUNT
10.7
(0.42)
32.9
(1.3)
0.5
(0.02)
20.3
(0.8)
19.5
(0.77)
DUAL MOUNT
Standard Time Delay Curves
1
(%) RATED CURRENT
TRIPPING TIME
1
10
0.1
0.01
10
1
1
10
0.1
5000
4000
2500
3000
2000
10
1
0.1
1
0.1
0.01
0.001
0.01
0.01
1500
100
105
130
150
5000
4000
2500
3000
2000
1500
1000
1200
500
400
300
CURVE OP
INSTANTANEOUS DC
(4% RIPPLE FACTOR)
10
1
SECONDS
1
AMBIENT TEMPERATURE
30˚C
100
10
TRIPPING TIME
AMBIENT TEMPERATURE
30˚C
INTERNAL IMPEDANCE
vs CURRENT RATING
AMBIENT TEMPERATURE
30˚C
INTERNAL IMPEDANCE [Ohms]
CURVE U3 DC
(4% RIPPLE FACTOR)
100
MINUTES
CURVE U2 DC
(4% RIPPLE FACTOR)
(%) RATED CURRENT
OPERATING
CHARACTERISTICS
OPERATING
CHARACTERISTICS
SECONDS
100
10
200
100
105
130
150
5000
4000
1000
1000
MINUTES
MINUTES
2500
3000
(%) RATED CURRENT
OPERATING
CHARACTERISTICS
TRIPPING TIME
2000
(%) RATED CURRENT
1000
SECONDS
1500
1000
1200
500
400
300
200
100
105
130
150
5000
4000
500
2500
3000
0.001
2000
0.001
1500
0.001
1000
1200
0.001
400
0.01
300
0.01
200
0.01
100
105
130
150
0.01
1000
1200
0.1
500
0.1
400
0.1
TRIPPING TIME
TRIPPING TIME
1
10
300
0.1
CURVE 9
1
10
SECONDS
1
AMBIENT TEMPERATURE
30˚C
10
1
10
SECONDS
1
100
10
1
TRIPPING TIME
TRIPPING TIME
1
SECONDS
CURVE 3
10
10
OPERATING
CHARACTERISTICS
AMBIENT TEMPERATURE
30˚C
100
200
CURVE 2
10
1000
OPERATING
CHARACTERISTICS
SECONDS
CURVE 1
AMBIENT TEMPERATURE
30˚C
100
MINUTES
MINUTES
AMBIENT TEMPERATURE
30˚C
100
1000
OPERATING
CHARACTERISTICS
MINUTES
1000
OPERATING
CHARACTERISTICS
MINUTES
1000
1
2
5
6
10
15
20
25
30
35
40
50
CURRENT RATINGS [Amps]
(%) RATED CURRENT
(%) RATED CURRENT
5000
4000
2500
3000
2000
1500
1000
500
400
300
200
130
150
5000
4000
2500
3000
2000
1500
1000
1200
500
400
200
300
(%) RATED CURRENT
105
0.001
0.001
100
105
130
150
5000
4000
2500
3000
2000
1500
1000
1200
500
400
300
200
100
105
130
150
0.001
AC
DC
18
CBE Range
Q-Series miniature circuit breakers (13 & 18mm module widths)
Long Code
Group 1: Frame
Type
Code
QA(13)
QF(13)
QF(18)
QZ
QY
QDC
Frequency
Approvals
VDE, CE
cURus,VDE, CE
CURus,VDE,CE
CURus,VDE,CE
UL489A VDE, CE
VDE, CE
Description
Comments
Leave blank if
not applicable
AC
AC
AC
AC
DC
DC
Group 2:
Code
N
S
Neutral
Switch
Group 3:
Auxiliary
Code
A
T
AT
Description
Auxiliary Switch
Trip Alarm
Auxiliary Switch + Trip Alarm
Group 4: Number Code
1
of Poles
2
3
4
Comments
Leave blank if
not applicable
Description
Comments
Single Pole
Double Pole
Triple Pole
Four Pole
Group 5:
Module width
Code
13
18
Description
Comments
13mm
18mm
Group 6:
Mounting
Code
D
DM
P1
Code
P2
Description
DIN – 45mm Escutcheon
Dual Mount – DIN & Mini-Rail, 57mm Escutcheon
Plug-in, DIN
Plug-in, Dual Mount
Comments
Group 7: Time
Delays
Code
1
2
3
9
U2
U3
OP
Description
Comments
Curve 1
Curve 2
Curve 3
Curve 9
Curve U2
Curve U3
Instantaneous
Group 8:
Current Ratings
Code
0.1
0.2
0.5
01
1.5
02
2.5
03
04
05
06
10
15
16
20
25
30
32
35
40
45
50
60
63
70
80
100
125
150
Description
Comments
0.1A
0.2A
0.5A
1A
1.5A
2A
2.5A
3A
4A
5A
6A
10A
15A
16A
20A
25A
30A
32A
35A
40A
45A
50A
60A
63A
70A
80A
100A
125A
150A
Code
B0
B1
B2
T3
Z
Description
80V DC Bottom Connected (Positive at bottom)
125V DC Bottom Connected (Positive at bottom)
250V DC Bottom Connected (Positive at bottom)
250V DC with + & – connecting terminals at top
DC – Bridged (Link not supplied)
Group 9:
Example codes: QA-1(13)-DM-2-20A
QF-A-2(13)-D-1-25A
QF-N-AT-4(18)-D-9-60A
QZ-T-3(13)-D-2-60A
QDC-2(13)-DM-U2-50A-T3
QY-A-3(13)-D-U2-150A-B0
For more ratings
consult factory
Comments
Leave blank if
not applicable
A member of the
Group
Germany
USA
Australia
CBI-electric: low voltage
CBI-electric: Europe
CBI-electric: North America
CBI-electric: Australia
Tripswitch Drive Elandsfontein
Zeppelinstr. 4
35E Uwchlan Ave Suite 328
821 Springvale Road Mulgrave Melbourne
Gauteng South Africa
D-82178 Puchheim, Germany
Exton PA 19341 USA
Victoria 3170 Australia
Tel:
+27 11 928 2000
Tel:
+49 89 60 80 77 0-0
Tel:
+1 610 524 9949
Tel:
+61 3 9560 3522
Fax:
+27 11 392 2354
Fax:
+49 89 60 80 77 0-11
Fax:
+1 610 524 9945
Fax:
+61 3 9562 0420
E-mail:
cbi@cbi-electric.com
E-mail:
office@cbibreakers.de
E-mail:
info@cbibreakers.com
E-mail:
heinelec@heinelec.com.au
Website:
www.cbi-electric.com
Website:
www.cbi-electric.com
Website:
www.cbibreakers.com
Website:
www.heinemannelectric.com.au
July 2007/June Viljoen Print Design Print
South Africa
19
QF14-D Range
Earth Leakage
Applications
Residential and commercial applications requiring high sensitivity
earth leakage protection from electrical shock and fire hazards
- Surface and DIN Rail mounting options
-
Features
-
SANS 767 and VC 8035 approved, as required by SANS 10142
Compact width (36mm wide)
Energy limiting capability on both switch and circuit breaker versions
Switch version fitted with short circuit protection for additional safety
Top busbar design enables easier installation
Single pole plus switched neutral earth leakage protection
Hydraulic Magnetic technology results in accurate temperature
independent tripping
Current ratings up to 63A
Trip indication (mid trip handle position)
Improved terminal visibility
Technical Data
Product Type
Standard Ampere Ratings (A)
Sensitivity (mA)
Number of Poles
Equipment Type
Rated Voltage (V)
Rated Interrupting/
Withstand Capacity (kA)
Mounting Options
DIN Rail
Surface
Weight (kg)
Mechanism
Tripping Curves (1)(standard)
Operating Temperature
QF14A-D
QF14C-D
5 to 63A
30
1+N
Earth Leakage
230
5 kA
–
40 and 63A
30
1+N
Earth Leakage
230
–
5 kA
✓
✓
✓
✓
0,26
Hydraulic-Magnetic and Earth Leakage
2(1),3
0,24
Magnetic and Earth Leakage
–
-100C to +600C
20
����
�����
���
�����
QA14-D
& QF14-D Range
�������������������������������
Earth Leakage
� �����������������������������
� ��������������������
� ����������������������������������� �����������������������
��������������������������������
� �������������������������������������������������
� �����������������������������
� ����������������������� ����������������������������������
��������
�
�
�
�
�
�
�
�
�
�
������������
������������������
��������������
���������������������������
���������������������
����������������
����������������
��������������������������
�������������������������
��������������������
1
N
��� �����
��������������
���������������
������������
���������
���������������
���������������
��������������
���������������������
���������������
����� ������������
��� ����������
�� �
�� �
��������������
��������������
N
2
���������������������
���������������������
��������������
��������������
�������������� QF14A/QF14C
��������������
���������������
���������������
��������������
��������������
����������������
���������������
��������������
��������������
����������������
���������������������������
���������������
��������������������
�
������
����������
��������������
��������������
���������������
��������������
���������������
���� �����
�����
��
��
�������
�������
�������
�������
�������
�������
����
��
����
��
���
���
��
����
��
���
���
��
����
�
����
��
���
���
��
����
���
����
���
��
����
�
����
���
����
���
��
����
���
����
����
����
�����
��
�����
���
�����
����
����
�����
���
�����
���
�����
����
CBI-electric: low voltage
Private Bag 2016 Isando 1600 - Tripswitch Drive Elandsfontein Gauteng 1401 South Africa
Tel:+27 11 928 2000 - Fax:+27 11 392 2354 - cbi@cbi-electric.com www.cbi-electric.com
����
�����
������
�����
���
�����
������
������
����
����
������ of the�����
A member
�����
�����
�����
������
�����
������
����
�����
Group
����
February 2008 / June Viljoen Print Design Print
��
���������������������������
��������������������
������
21
DATA
SHEET
����
�����
���
�����& QF17 RANGE
QA17
�������������������������������
Residential/Commercial protection
Applications
- Commercial applications requiring high sensitivity earth leakage protection from electrical
shock and fire hazards.
�
��������
- Installations exposed to high and low ambient �
temperatures. The hydraulic magnetic design �
allows the device to always keep rated current.
�
�
�
�����������������������������
��������������������
����������������������������������� �����������������������
��������������������������������
�������������������������������������������������
�����������������������������
����������������������� ����������������������������������
Features
- Top busbar design enables easier installation
- CE approved.
� ������������������
- Single pole plus switched neutral earth leakage
- UL1077 and UL1053 certified.
������������
� ��������������protection
- VDE certified to DIN EN 60 947-1 and 60 947-2.
� ���������������������������
- Trip point is unaffected by ambient temperature
- Small frame size (26mm wide).
� ���������������������
- Current ratings up to 63A
- Energy limiting capability on both switch and circuit
� ����������������
- Trip indication (mid trip handle position)
breaker versions.
� ����������������
- Switch version fitted with short circuit protection
� ��������������������������
for additional safety.
� �������������������������
� ��������������������
� ��� �����
Technical Data
��������������
���������������
������������
���������
Product Type
���������������
���������������
Standard Ampere Ratings (A)
��������������
Sensitivity (mA)
���������������������
Number of Poles
Equipment Type
���������������������������
Rated Voltage (V)
Rated Interrupting/
Withstand Capacity (kA)
���������������
Weight (kg)
���� �����
������(1)
�����Tripping Curves (standard)
Operating Temperature ����
��
�������
��
��
��
�������
�������
�������
�������
�������
����
��
���
���
��
���������������
���������������
����� ������������
��� ����������
��������������������
QA17A
QA17C �� �
QF17A
QF17C
�� �
�
������ 40 and 63 A
5 ��������������
to 63 A
40 and 63 ��������������
A
5 to 63 A
���������������������
���������������������
����������
30, 100, 300
30, 100, 300
30, 100, 300
30, 100, 300
��������������
��������������
��������������
��������������
��������������
��������������
1���������������
+N
1+N
1+N
1+N
���������������
���������������
��������������
��������������
Earth
Leakage ��
Earth Leakage
Earth��Leakage/GFCS
����������������
���������������
������������
�������������� Earth Leakage /GFCS
������������
����������������
240
240
240
240
3 kA
–
6 kA
–
–
3 kA
–
6 kA
0,26
0,24
2 ,3
–
(1 )
-40
to +60ºC����
����
��
��
���
���
���
���
��
��
����
����
�
���
0,26
���������������������������
2
��������������������
-40 to +80ºC
����
����
���
���
��
��
����
����
�
���
����
����
���
����
-40 to +80ºC
����
����
�����
�����
��
���
�����
�����
���
���
�����
�����
����
����
0,24
–
to +80ºC �����
���� -40�����
������
�����
������
���
�����
�����
������
������
������
����
����
����
������
�����
�����
�����
�����
����
22
����
DATA
�����
SHEET
��� �����
QA17
& QF17 RANGE
�������������������������������
Residential/Commercial protection
Technical Data
DUAL
66
(2.59)
� �����������������������������
26
� ��������������������
(1.02)
� ����������������������������������� �����������������������
��������������������������������
8.0
17.4
� �������������������������������������������������
(0.31)
(0.68)
� �����������������������������
� ����������������������� ����������������������������������
�
�
�
�
�
�
�
�
�
�
������������
45
(1.77)
71.4
(2.81)
93
(3.66)
82.4
(3.24)
57
(2.24)
7.8
(10.30)
��������
69.8
(2.74)
74
(2.91)
DIN
73
(2.87)
65
(2.56)
������������������
��������������
���������������������������
���������������������
����������������
����������������
��������������������������
�������������������������
��������������������
��� �����
36.7
(1.66)
1.5 to 2.5
(0.06 to 0.09)
TOP BUSBAR
26
(1.02)
��������������
45.0
(1.77)
82.4
(3.24)
93
(3.66)
���������������������������
���������������
���� �����
�����
������
November 2006 UMA
���������������
8.0
16.4
(0.315)
(0.646)��������������������
�
������
����������
��������������
��������������
���������������
��������������
35.7
(1.406)
44
(1.73)
68.8
(2.71)
����
����
����
�������
��
��
��
�������
����
���
���
��
������� Circuit
��Breaker Industries
���
���
GmbH
CBI-electric: low voltage
������� Postfach
���101240 D-86882
��
��
Tripswitch Drive Elandsfontein
�� Africa ������� Landsberg
Gauteng South
��� Germany
����
����
Tel: +27 11 928 2000 ������� Tel: +49
��8191 9472900�
���
Fax:
+49
8191
94729011
Fax: +27 11 392 2354
Your partner for
CBI
products
��
E-mail: cbi@cbi-electric.com
Website: www.cbi-electric.com
���������������
��� ����������
�� �
��������������
���������������������
��������������
��������������
���������������
��������������
����������������
��������������
7.8
(0.307)
����� ������������
�� �
��������������
���������������������
��������������
��������������
���������������
��������������
���������������
��������������
����������������
71.4
(2.81)
���������������
������������
���������
���������������
���������������
��������������
���������������������
E-mail: office@cbibreakers.de
Website: www.cbibreakers.com
���������������������������
��������������������
����
����
����
����
����
�����
�����
���
���
�����
�����
������
�����
������
��
��
��
���
����� Group�����
A ���
member of the
���� Breaker
����
�����
������
������
Heinemann������
Electric Pty.
Ltd.
Circuit
Industries�����
Inc
�
���
����
����
821���
Springvale Rd
Mulgrave ����
35E Uwchlan
Ave���
Suite 328
Melbourne
Victoria
Australia
Exton
PA 19341����
USA
����
�����AB �����
������
�����
�����
Emcomp
International
Phone:
+463170
(0)581-621550
Tel:
+61Fax:
3 9560
3522
Tel: ���
+91 610 524����
9949
����
����
�����
�����
����
+46
(0)581-621560
Box 7
Fax: +61 3 9562 0420
Fax: +91 610 524 9945
www.emcomp.se
SE 71041 FELLINGSBRO
E-mail: heinelec@heinelec.com.au
E-mail: info@cbibreakers.com
Sweden
CBI@emcomp.se
Website: www.cbibreakers.com
Website: www.heinemannelectric.com
23
CBE Range
Q–Series Miniature Circuit Breakers
Product Type
QL
Standard Ampere Ratings (A)
0.1 – 25
QY
QZ
QDC
0.1 – 63 (1 pole)
0.1 – 50 (2 poles)
20 – 100 (2p parallel)
110 – 150 (3p parallel)
1, 2
2, 3p parallel
0.1 – 60 (UL 1077)
5 – 50 (IEC 60947-2)
120V AC (1p)
240V AC (1p)
240/415V AC (2, 4p)
277V AC (1p)
277/480V AC (2, 3p)
3kA (240/415V
AC)
√
0.1 – 63 (1 pole)
0.1 – 50 (2 poles)
20 – 100 (2p parallel)
110 – 150 (3p parallel)
1, 2
2, 3p parallel
2 poles in series
80V DC
125V DC (1, 2p & 2p
parallel)
250V DC (2p in series)
Polarity sensitive
10kA
√
5kA (1p, 120V ac)
5kA (277/480V
ac)
√
√
Number of Poles
1, 2, 3, 1+N, 3+N
Rated Voltage (V)
120V AC (1p)
120/240V AC(2p)
240V AC (1p)
240/415V AC 2, 4p)
80V DC
125V DC (1, 2p & 2p
parallel)
Polarity sensitive
6kA (240/415V
AC)
√
10kA
√
10kA (120/240V
AC)
√
√
10kA
√
√
√
√
√
√
√
Approvals
&
Interrupt.
Capacity
(kA)
Mounting
Options
VDE (EN 60947-2)
CE
cULus (UL489_CSA)
UL489A
cURus
(UL1077_CSA)
Dual Mounting
(DIN & Mini)
DIN Rail
Surface Clip
Plug-in
Tripping curves
Resistance to shock
Vibration
Operating temperature
Optional Accessories
Features
1, 2, 3, 1+N, 3+N
√
√
√
√
√
OP, U2, 1, 9
OP, U2, 1, 9
1, 2, 3, 9
IEC 60068-2-27, 5G/30ms half sine wave, QL-range: consult factory
IEC 77/IEC 60068-2-6, 3G/10-150Hz, QL-range: consult factory
-40°C to +65°C
Aux. switch
– Trip alarm
Aux. switch + trip alarm
– Bus bar
Handle lock
Compact 13mm/module width
– Hydraulic-magnetic technology
Precision tripping
– Suitable for isolation
Temperature independent trip point
– Mid trip handle
1, 9, KM
–
–
–
–
–
–
24
CBE Range
Range
Q–Series Miniature Circuit Breakers
QL
QY
QDC
-
-
-
AC circuit breaker
UL 489 Listed
VDE, CSA, CE Approved
One and two pole units
Current ratings up to 25A
74
(2.91)
DC circuit breaker
UL 489A listed
VDE & CE Approved
One and two pole units
Current ratings up to 150A
80V dc & 125V DC
17.9
(0.7)
65
(2.56)
13
(0.51)
60
(2.36)
26
(1.02)
39
(1.54)
19
(0.75)
135 (5.32)
92.8
(3.65)
45
(1.77)
57
(2.24)
71.4
(2.81)
28.5
(1.12)
25.9
(0.94)
22.5
(0.86)
66
(2.6)
44
(1.73)
32
(1.26)
5
(0.2)
DC circuit breaker
VDE and CE Approved
One and two pole units
Current ratings up to 150A
80V DC 125V DC and
250V DC (250V DC 2 poles
in series)
45
(1.77)
NOTE: DIMENSIONS IN BRACKETS ARE IN “INCHES”
73
(2.87)
64.8
(2.55)
DUAL MOUNT
13
(0.51)
63.8
(2.51)
5.0
(0.2)
151 (5.95)
Features
QY / QDC,
QY/QDC,
2 2&& 33POLES
POLES
BRIDGED IN PARALLEL
BRIDGED IN PARALLEL
DIN RAIL MOUNT
QZ
Features
-
74
(2.91)
65
(2.56)
19.9
(0.78)
13
(0.51)
60
(2.36)
26
(1.02)
39
(1.54)
19
(0.75)
44
(1.73)
32
(1.26)
5
(0.2)
45
(1.77)
64.8
(2.55)
DUAL MOUNT
5.0
(0.2)
63.8
(2.51)
96.8
(3.81)
45
(1.77)
57
(2.24)
71.4
(2.81)
28.5
(1.12)
25.9
(0.94)
22.5
(0.86)
66
(2.6)
AC circuit breaker
UL 1077 Recognized
VDE, CE, CSA certified
One, two and three pole units
Current ratings up to 60A
13
(0.51)
NOTE: DIMENSIONS IN BRACKETS ARE IN “INCHES”
73
(2.87)
DIN RAIL MOUNT
25
CBE Range
Q–Series Miniature Circuit Breakers
Auxiliary switch,Trip alarm, Combo
Features
- AC and DC voltages
- UL 489 listed
(5A, 250V AC; 0.5A, 80V DC Auxiliary; 0.5A, 125V DC Trip alarm)
- IEC 60947-5-1 approved
(5A, 250V AC; 0.5A, 110V DC Auxiliary; 0.5A, 125V DC Trip alarm)
- Factory fitted
- Compact 6.5mm width
- Attached to right hand side of circuit breaker
- Available on Dual and DIN rail mounting
31.3
(1.23)
26.2
(1.03)
TRIP ALARM Q. CONNECTORS
21.1
(0.83)
5.5
(0.22)
0.5
(0.02)
57.0
(2.24)
45.0
(1.77)
(N/O)16
(N/C)18
(C)15
20.1
(0.79)
2
(0.08)
30.3
(1.19)
25.2
(0.99)
(N/O)16
(N/C)18
(C)15
6.5
(0.256)
14(N/O)
7
(0.28)
2.8
(0.11)
12(N/C)
11(C)
11(C)
12(N/C)
14(N/O)
AUX SWITCH Q. CONNECTORS
9.7
(0.38)
31.9
(1.26)
21.3
(0.84)
DIN RAIL MOUNT
10.7
(0.42)
32.9
(1.3)
0.5
(0.02)
20.3
(0.8)
19.5
(0.77)
DUAL MOUNT
Standard Time Delay Curves
100
CURVE 9
1
1
1
1
(%) RATED CURRENT
5000
4000
2500
3000
2000
1500
500
100
105
130
150
5000
4000
2500
3000
2000
1500
1000
1200
500
400
OPERATING TIME VARIATION (%)
100
75
50
40
30
25
70
60
50
40
30
20
0
10
-20
10
-30
12.5
(%) RATED CURRENT
5000
4000
AMBIENT TEMPERATURE (˚C)
2500
3000
5000
4000
2500
3000
2000
1500
1000
1200
500
400
300
200
100
105
130
150
5000
4000
2500
3000
2000
1500
1000
500
0.001
400
0.001
300
0.001
200
0.01
125
150
0.01
150
125
20
17.5
15
0.1
0.01
100
300
1
2000
0.1
AMBIENT TEMPERATURE
TIME VARIATION FOR
HYDRAULIC-MAGNETIC
CIRCUIT BREAKERS
300
200
175
10
500
0.1
MINUTES
1
SECONDS
1
10
400
250
1
400
10
500
CURVE OP
INSTANTANEOUS DC
(4% RIPPLE FACTOR)
10
300
1
AMBIENT TEMPERATURE
30˚C
100
200
1
(%) RATED CURRENT
OPERATING
CHARACTERISTICS
130
150
10
(%) RATED CURRENT
AMBIENT TEMPERATURE
30˚C
105
10
CURVE U2 DC
(4% RIPPLE FACTOR)
SECONDS
CURVE KM
100
TRIPPING TIME
MINUTES
AMBIENT TEMPERATURE
30˚C
100
200
100
105
130
150
5000
4000
1000
OPERATING
CHARACTERISTICS
TRIPPING TIME
MINUTES
2500
3000
1000
OPERATING
CHARACTERISTICS
TRIPPING TIME
2000
(%) RATED CURRENT
1500
1000
SECONDS
1500
1000
1200
500
400
300
(%) RATED CURRENT
1000
(%) RATED CURRENT
200
100
105
130
150
5000
4000
500
2500
3000
0.001
2000
0.001
1500
0.001
1000
1200
0.001
400
0.01
300
0.01
200
0.01
100
105
130
150
0.01
1000
1200
0.1
400
0.1
-10
0.1
1
300
1
10
SECONDS
0.1
10
SECONDS
1
SECONDS
1
TRIPPING TIME
10
TRIPPING TIME
10
10
AMBIENT TEMPERATURE
30˚C
200
CURVE 3
10
10
SECONDS
CURVE 2
OPERATING
CHARACTERISTICS
AMBIENT TEMPERATURE
30˚C
100
-40
MINUTES
CURVE 1
AMBIENT TEMPERATURE
30˚C
100
1000
OPERATING
CHARACTERISTICS
10
TRIPPING TIME
MINUTES
TRIPPING TIME
AMBIENT TEMPERATURE
30˚C
100
1000
OPERATING
CHARACTERISTICS
MINUTES
1000
OPERATING
CHARACTERISTICS
MINUTES
1000
26
�������������������������������
Q–Series Miniature Circuit Breakers
Example codes:
Long Code
Group 1: Frame
Type
QY-1(13)-D-U2-20A-B1
QDC-2(13)-DM-U2-50A-B2
QL-A-2(13)-D-9-25A
QZ-N-AT-4(13)-DM-60A
Code
Frequency
Approvals
QL
UL 489
AC
QY
UL489A,VDE, CE
DC
QZ
CURus,VDE,CE
AC
QDC DC
EN 60947-2, CE
Group 2:
Code
Description
Comments
N
Leave blank if
Neutral
S
not applicable
Switch
Group 3: Auxiliary Code
Description
Comments
A
Auxiliary Switch
blank if
� Leave
�����������������������������
T
Trip Alarm
not applicable
AT
Auxiliary Switch + Trip Alarm
� ��������������������
Group 4: Number
Code
Description
Comments
� ����������������������������������� �����������������������
of Poles
1
Single Pole
2
Double Pole
��������������������������������
3
Triple Pole
4
Four Pole
� �������������������������������������������������
Group 5: Module
Code
Description
Comments
width
13
13mm
�
�����������������������������
18
18mm
19
19.5mm
� ����������������������� ����������������������������������
26
26mm
Group 6: Mounting Code
Description
Comments
D
DIN – 45mm Escutcheon
DM
Dual Mount – DIN & Mini-Rail, 57mm Escutcheon
P1
Plug-in, DIN
Code
P2
Plug-in, Dual Mount
Group 7: Time
Code
Description
Comments
Delays
Curve 1
1
� ������������������
Curve 2
2
Curve 3
3
� ��������������
Curve 9
9
Curve U2
U2
� ���������������������������
Curve KM
KM
Instantaneous
OP
� ���������������������
Group 8: Current
Code
Description
Comments
Ratings
0.1
0.1A
� ����������������
0.2
0.2A
0.5
0.5A
� ����������������
01
1A
1.5
1.5A
� ��������������������������
02
2A
2.5
2.5A
� �������������������������
03
3A
04
4A
� ��������������������
05
5A
� ��� �����
06
6A
10
10A
15
15A
16
16A
20
20A
25
25A
30
30A
INTERNAL IMPEDANCE vs CURRENT RATING
32
32A
���������������
������������ 35 35A
���������������
���������������
40
40A
10
�� ������������
���������
���
���
����������
��������������������
45
45A
50
50A
���������������
�� �
�� �
�
60
60A
63
63A
���������������
��������������
��������������
������
70
70A
1
80
80A
��������������
���������������������
���������������������
����������
100
100A
��������������
��������������
��������������
���������������������125 125A
��������������
��������������
��������������
150
150A
���������������
���������������
���������������
��������������
��������������
Group 9:
Code
Description
Comments
0.1
�
���������������
Leave blank if ����������������
80V DC Bottom Connected
at bottom)
B0
���������������������������
����(Positive
��������������
��������������
��������
�
B1
125V DC Bottom Connected (Positive at bottom) not applicable
����������������
250V DC Bottom Connected (Positive at bottom)
B2
Z
DC – Bridged (Link not supplied)
��������
������������
��������������
INTERNAL IMPEDANCE [Ohms]
����
�����
���
CBE �����
Range
0.01
���������������
���� �����
�����
0.001
���������������������������
��������������������
1
������
2
AC
5
6
10
15
20
25
30
35
40
50
CURRENT RATINGS [Amps]
DC
�������
�������
South Africa
��
CBI-electric: low voltage
�������
Tripswitch Drive Elandsfontein
�������
Gauteng
��South Africa �������
Tel:
+27 11 928 2000
Your
�������
Fax:
+27 11 392 2354
E-mail:
cbi@cbi-electric.com
Website:
www.cbi-electric.com
E-mail:
office@cbibreakers.de
E-mail:
info@cbibreakers.com
E-mail:
heinelec@heinelec.com.au
Website:
www.cbibreakers.com
Website:
www.cbibreakers.com
Website:
www.heinemannelectric.com.au
January 2007/June Viljoen Print Design Print
��
����
����
����
����
����
����
����
����
�����
�����
Group
��
��
��
���
���
�����
����� A member
������ of the�����
������
���� Germany
���
���
�� USA
��
��
���Australia ���
�����
�����
Electric ������
(Pty) Ltd
�� Circuit Breaker
��� Industries
��� Gmbh ���� Circuit Breaker
���� Industries
�����Inc
�����Heinemann
������
������
Springvale
Road(0)581-621550
Mulgrave
35E Uwchlan
Ave Suite 328��� AB
International
+46
��� Postfach 101240
�� D-86882 ��
�Emcomp
���
���821 Phone:
����
����Melbourne����
3170
Exton PA����
Germany
Fax:������
+46Australia
(0)581-621560
��� Landsberg����
����
����Box
�����Victoria
�����
�����
7 19341 USA �����
Tel: www.emcomp.se
+61 3 9560 3522
Tel:
+91 610 524 9949
Tel:for CBI
+49products
8191 9472900
partner
FELLINGSBRO
��
�
���
���SE 71041����
����
����
�����
�����
����
Fax:
+61 3 9562 0420
Fax:
+91 610 524 9945
Fax:
+49 8191 94729011
Sweden
CBI@emcomp.se
27
DATA
SHEET
Surge Protection
5kA and 20kA Rail Mounted Surge Protective Devices
Features
-
SANS 61643-1 approved
Compact size (13mm per pole)
Clip-in, Dual mounting (Mini rail and DIN rail)
LED indication of the SPD’s condition – whilst ON, the SPD is functional, if OFF and the mains power is still available,
then the SPD is no longer functional and should be replaced
Thermal disconnect device (prevents potential thermal runaway problems)
One port SPD (no series impedance)
Voltage limiting/clamping-type SPD (MOV)
IP 20 rating
Applications
- For surge protection on incoming power supply in lightning protection zones OB to 1 or 1 to 2 in compliance with
SANS 10142-1 [The Wiring of Premises].
- For maximum efficiency, ensure that the installation is earthed in accordance with SANS IEC 61312.
Technical Data
Product Type
Max. Continuous Operating Voltage (Uc)
(Please specify desired voltage)
Voltage Protection Level (Up)
Nominal Discharge Current (In) Maximum
Discharge Current (Imax)
Short Circuit Withstand*
Lightning Protection Zone
SPD Class
QFL-1(13), QFL-1(13)D
QFL-3(13), QFL-3(13)D
QFLN-2(13), QFLN-2(13)D
QFLN-4(13), QFLN-4(13)D
130V
0.7kV
5kA (8/20 µs)
10kA (8/20 µs)
2,5kA (50Hz)
OB to 1 or 1 to 2
Class II
275V AC (RMS)
1.5kV
QKL-1(13), QKL-1(13)D
QKL-3(13), QKL-3(13)D
QKLN-2(13), QKLN-2(13)D
QKLN-4(13), QKLN-4(13)D
275V AC (RMS)
1.5kV
20kA (8/20 µs)
40kA (8/20 µs)
5kA (50Hz)
OB to 1 or 1 to 2
Class II
*Backed up by a suitable short circuit protection device (SCPD)
* For Prospective Short Circuit Currents up to 2,5kA:
Use any QA circuit breaker
* For Prospective Short Circuit Currents up to 5kA:
Use any QF circuit breaker
* For Prospective Short Circuit Currents above 5kA:
Contact CBI-electric:low voltage
28
��� �����
Surge
Protection
�������������������������������
5kA
and 20kA Rail Mounted Surge Protective Devices
5
Point of control
L1
L2
- For maximum efficiency, the installation
should be earthed according to SANS
61312
- If the distance of N and E is >20m from the
separating point “P” on a TN-C-S system,
��������
use a 2 pole device (1P+N).
- (For details refer to SANS 10142-1).
DIMENSIONAL DATA
57mm Escutcheon (Mini Rail Mounting)
13
PEN
4
L1
L2
L2
L3
L3
N
N
PE
PE
5
L1
L2
4
L3
N
7
6
S
P
D
S
P
D
S
P
D
PE
S
P
D
S
P
D
S
P
D
1
S
P
D
S
P
D
1
� �����������������������������
� ��������������������
TN-C-S
TN-S*
� ����������������������������������� �����������������������
*SINGLE PHASE
��������������������������������
� �������������������������������������������������
� �����������������������������
� ����������������������� ����������������������������������
2
3
26
39
2
3
E
E
52
57
11
������������
85
11
66
L3
L1
Point of control
Wiring Precautions
5
25
16
DIMENSIONAL DATA
45mm Escutcheon (DIN Rail Mounting)
13
45
��������������
�
�
�
13�
�
�
�
�
26 �
�
������������������
��������������
���������������������������
H
W
D
���������������������
����������������
����������������
��������������������������
�������������������������
��������������������
39
52
��� �����
���������������
������������
5
���������
���������������
���������������
��������������
���������������������
H
W
���������������
D
25
16
���������������������������
1P
85
13
66
2P
85
26
66
3P
85
39
66
4P
85
52
66
1P
85
13
66
2P
85
26
66
3P
85
39
66
4P
85
52
66
85
11
66
11
DATA
����
SHEET
�����
CBI DATA S H E E T
����� ������������
��� ����������
13
�� �
�� �
��������������
��������������
���������������������
���������������������
��������������
��������������
��������������
��������������
���������������
���������������
��������������
��������������
���������������
�������������� Slide yellow clip up and ����������������
��������������
����������������down as indicated
���������������
��������������������
�
������
����������
��������������
��������������
���������������
��������������
to install and remove
the unit.
MOUNTING
AND INSTALLATION
���������������
���� �����
�����
������
�������
�������
JOHANNESBURG
��
Head Office
�������
Private Bag 2016 Isando 1600�������
South Africa
��
�������
Tripswitch Drive Elandsfontein
�������
Gauteng
Tel: (011) 928 2000
Fax: (011) 392 2354
Website: www.cbi-electric.com
E-mail: cbi@cbi-electric.com
����
����
��
��
����
���
BLOEMFONTEIN
Free State/Northern
��
���Cape
PO Box
9719
Bloemfontein
���
�� 9300
6 AE Viljoen Square Hilton
���
����
Bloemfontein
��
Tel: (051) 430 8613/4 �
Fax: (051) 430 1141
Website: www.cbi-electric.com
E-mail: bfn@cbi-electric.com
���������������������������
DIN Rail
��������������������
����
����
����
��
���
���
��� CAPE TOWN
��
��
Western
Cape
���
����
����
�� PO Box 17055� Ravensmead���
Cape Town 7504
����
����
����
Unit 2 Central Park Epping Ave
��� Elsies River���
����
Tel: (021) 931 3125/6/7/8/9
Fax: (021) 931 3120
Website: www.cbi-electric.com
E-mail: ctn@cbi-electric.com
����
����
����
�����
�����
Group
�����
����� A member
������ of the �����
������
��
���
���
�����
�����
DURBAN
PORT ELIZABETH
Kwa Zulu Natal
Cape ������
�����
�����
������ Eastern
������
PO���
Box 7 Durban���
4098
PO
Box
3584
����
���� North End
����
No 70 Intersite Avenue
Port Elizabeth 6056
�����
�����
������
�����
�����
Umgeni Business Park
425 Fettes Road
����
����
����� North�����
����
Tel:
(031) 263 0900
End
Fax: (031) 263 0999
Website: www.cbi-electric.com
E-mail: dbn@cbi-electric.com
Tel: (041) 374 1270/1/2
Fax: (041) 373 1919
Website: www.cbi-electric.com
E-mail: pe@cbi-electric.com
February 2007 / June Viljoen Print Design Print
��
Mini Rail
29
Emcomp International AB
Box 7
SE 710 41 Fellingsbro
SWEDEN
Phone: +46 (0)581-62 15 50
Fax: +46 (0)581-62 15 60
www.emcomp.se
CBI@emcomp.se
Download