AMC SPS200 SWITCHING POWER SUPPLY FOR SPA RV MARINE CONFORMS TO ANSI/UL STD. 1012 UL STD. 1563 CERTIFIED TO CAN/CSA STD. C22.2 NO.107.1 CAN/CSA STD. C22.2 NO.218.1-M89 RECOGNIZED COMPONENT APPLICATION AND FEATURE LIST Features of the AMC model SPS200 * AC voltage selector ·Over voltage protection * Over current protection * Short circuit protection * Internal fuse protection * Power On and Protection LED indicator * Output : DC13.8V, 15A * 100% Full load burn-in * Bulit-in DC fan ·Conformal coating structure * Grounded core power supply for Spas, Hot Tubs equipments * Safety/EMC Certificated CONFORMS TO ANSI/UL STD. 1012 UL STD. 1563 CERTIFIED TO CAN/CSA STD. C22.2 NO.107.1 CAN/CSA STD. C22.2 NO.218.1-M89 RECOGNIZED COMPONENT * Special Designed for SPA, RV, MARINE Applications 2 FRONT PANEL CONTROLS 1 2 3 1.Power Switch: Switching to "I" will turn on the SPS200. Switching to "O" will turn the unit off. CAUTION: Before plugging power cord to power outlets, please set the AC Voltage Selector to the line voltage. 2.Power LED: The green LED lights when the SPS200 is turned on. The LED will turn off if the unit is turned off or in protection mode. 3.Protection LED: The red LED lights when the unit is self protected against short circuit, over current or over voltage. Turn off power switch and take away short circuit or over current or over voltage. Wait for more than 20 seconds before switching SPS200 on again. 3 REAR PANEL CONNECTIONS 2 1 3 4 1. "+"Output Terminal: Positive polarity output terminal. 2. "-" Output Terminal: Negative polarity output terminal. 3. Voltage-Selector Switch: Select 100VAC ~ 120VAC or 200VAC ~ 240VAC. In USA units, this switch is fixed to 100VAC ~ 120VAC. WARNING: To avoid electric shock, disconnect the power cord from AC outlet before switching Voltage-Selector. 4.Power Cord: Use only a polarized 3-wire AC outlet. This assures that SPS200 is connected to a good earth ground. 4 SPECIFICATIONS Output DC Voltage............................................................................................13.8Vdc Output Rated current............................................................................................... 15A Output Current Rage......................................................................................... 0 ~ 15A Output Ripple............................................................................................... <100mVpp Output Load Regulation...................................................................................... + - 1% AC Input Voltage Range............................................... 100 ~120VAC / 200 ~ 240VAC selected by voltage selector AC Inrush Current........................................ Cold Start < 30A @ 120VAC, 60A@230V AC Input Frequency................................................................................. 47Hz to 63Hz Efficiency.................................................................................................... Typical 75% Operating Frequency.......................................................................................... 30KHz Over Voltage Protection........................................................................... at over 16.5V Over Current Protection.......................................................................... at 150% Load Safety Certifications ............................................................................. UL (UL1012 ) (UL1563 ) CSA (CSA-C22.2 No. 107.2-01) (CSA-c22.2 No.218.1) CE (IEC61558-1) (IEC61558-2-17) EMC Standards........................................................................................ EN 61204 - 3 Operating Temp Range .......................................................... 0 ~ +50°C at 100% load Storage Temp Range ................................................................................ -20 ~ +85°C Overall Size ............................................................... 8” x 2 1/2" x 7 1/2" (W x H x D) Power Supply ............................................................. 240VAC 50Hz (B, B1 versions) 230VAC 50Hz (C version) 120VAC 60Hz (A, T versions) 100VAC 50/60Hz (J version) 5 IMPORTANT SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the appliance and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. WATER AND MOISTURE Keep the apparatus away from water and moisture. 6. CARTS AND STANDS The appliance should be used only with a cart or stand that is recommended by the manufacturer. 6A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 7. WALL OR CEILING MOUNTING This equipment is not designed for use mounted on a wall or a ceiling. 8. VENTILATION Place the apparatus in a good ventilated open and cool position. Do not block the flow of air through the ventilation openings. 9. HEAT Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 10. CLEANING The apparatus should be cleaned only with dry cloth. 11. POWER SOURCES The apparatus should be connected to a power supply only of the type described in the operating instructions or as marked on the apparatus. NOTE: Some products are equipped with multiple voltage selector, be sure voltage selector is in correct voltage position before plugging in. For use in the U.S.A., the voltage switch must be placed in the 120 volt position. For use in countries other than the U.S.A., the voltage selector may need to be placed in other than the 120 volt position. Confirm the voltage available at each country location before using the product. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet. 12. POWER CORD PROTECTION Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 13. POLARIZED PLUG Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 14. UNPLUG POWER CORD Unplug this apparatus during lightning storms or when unused for long periods of time. 15. OBJECT AND LIQUID ENTRY No object filled with liquids, such as vases, etc. shall be placed on the apparatus. 16. ACCESSORIES Only use attachments/accessories specified by the manufacturer. 17. SERVICING The user should not attempt to service the apparatus beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. 18. DAMAGE REQUIRING SERVICE The apparatus should be serviced by qualified service personnel when: a) The power-supply cord or the plug has been damaged; or b) Objects have fallen, or liquid has been spilled into the appliance; or c) The apparatus has been exposed to rain; or d) The apparatus does not appear to operate normally or exhibits a marked change in performance; or e) The apparatus has been dropped, or the enclosure is damaged. WELTRONICS CORP. LONDON/L.A. AMC Web: http://www.amchome.com PN: 21-4186