Certificate Number
Baseefa06A TEX0011 X
Issued 28 September 2006
Page 1 of 4
EC - TYPE EXAMINATION
2
Equillment
or Proteetiw
CERTIFICA TE
SJstem Intended for use in PotentiallJ' E,plosi\'e
Directi\'e 94/9/EC
Atmospheres
EC - T)'pe Examinalion
Cenifieale Number:
Bascefa06A TEXOOI IX
Equipmcnt or Protcctivc System:
K1illpon TB RANGE OF SHEET METAL TERMINAL
BOXES
M3llufacturcr:
Wcidmuller
6
Address:
KlinJ:cnbcr~strasse 16,32758 Dctmold, German)'.
7
This cquipmcnt or protectivc systcm and an}' acceptable variation (hcTeto is spccified in the schedllic 10 this
eenifieale and Ihe documents Iherein referred 10.
H
Baseefa (2001) LId., Nolified Bod)' number 1180. in aeeordanee with Anicle 9 ofthe Couneil Direeti\'e 94/9/EC or
23 March 1994. eenifies Ihat Ihis equipment or proteeti\'e s)'stem 1.15 been round 10 eompl)' wilh the Essential
HeaIlh and Safet)' Requirements rc1ating to Ihe design and eonstruetion or equipment and proleeli\'e s)'slems
intcnded for use in potcntially explosive atmosphercs gi"cn in Annex 1110 the Dirccli\'c.
J
JUNCTION
Interface GmhH & Co KG
The examina tion and lest rcsuIls are reeorded in eonfidential Repon No. GBfBAS/E,TR06.00J
VOO
Compliancc with the Essential Hcalth and Safet)' Rcquircmcllls has beeil assured by compliancc wilh:
I)
EN 60079-0:2004,
EN6tHI79-7:200J,
IIrEN 61241-0: 2tHI5,
EN 61241-1: 2004
exeepl in respeel oflhose requiremenls Iisled at ilem IH oflhe Sehedule.
10
Iflhe sign "X" is plaeed after the eenifieale numher. it indieales Ihal Ihe equipmenl or proleel;\,e s)'slem is subjeel
10 special eondilions ror safe use spceified in Ihe sehedllie 10Ihis eenifieate.
II
111is EC - TYPE EXAMINA TION CERTIFICA TE relatcs onl)' 10 Ihe design and eonstmetion of the speeified
cquipment or protecti\'c systclll. Further rcquircllIcnts of the Directiye apply to the manufacturing process and
supply of this cquipment or protccti\'c systcm. These are not covcrcd by this certificatc.
12
lllC marking of the equipmellt or proleeli\'e s)'stem shall inc1ude the following :
<Q
11 2GD Exe 11 E, tD A21 T(sce schedule)
H5°C Tamh -60°C to
(Sl'C
schedule)
This ccrtificatc may only bc reproduccd in its entirety, without any change, schcdule includcd.
Baseefa Cuslomer Referenee No. 4415
Projeet File No. 05100HI
llIis l:t:rtificate is granted subject to the general tenns and conditions of
Bast:cfa (2001) Ud. It docs not nel:essarily indicate that the cquipmcnt
may hc usoo. in particular industrit..'Sor circumstances.
Baseefa
Rockhead Business Park, Staden Lane,
BlIxton, Derbyshire SK 17 9RZ
Telephone +44 (0) 1298 766600
Fax +44 (0) 1298766601
e-mail info@baseefa.comwebsitelf.l.vVW.baseefa.com
ff~~
D1RECTOR
On behalf of
Baseefa (200 I) Ltd.
Baseefa is a trading name of Baseefa (2001) LId
Registered in England No. 4305578 at the above address
Re.jssued 24/07/07
Certificate Number
Baseefa06ATEX0011X
Issued 28 September 2006
Page 2 cf 4
Schedule
\J
Certificate Number Baseefa06A TEXOOIIX
I~
15
Dcscrilltion of Equipment or Protectil'c S)'stcm
Thc Klippon TB terminal junetion boxcs coosist of Weidmuller type Klippon TB shcct metal cmpty cnclosurcs to Baseefa
Certificate Number Baseefa06ATEXOOIOU and report number GBIBAS/ExTR06.0tl30/00
eoded Exe Il and have an
ingress proteetion rating of IP66 and IP67 with impact ratings up to 10 Joules.
Thc cnclosurcs may be fitted with a variet)' of different raH Of diecct mounted terminal arrangements. All tcnninals are
covercd by their OWH component certificatcs and are coded Exc 11. The tcnninals pcnnitted are listcd on Drawing Numbcr
WMUK-KTB0008 held on Baseefa General Technical File ~~15 and on the Notiee to Installers.
Thc terminals shall bc uscd within their relevant tcmpcraturc range aod ratings and installcd by Weidmuller.
When required, Exe Il tennitmls for intrinsieally safe (i.s.) circuits may be fitted complete with an additional extenmllabel
stating 'Intrisieally Safe Circuits Enclosed'. TIlC i.s. tenuimls may be blue in eolour 10 suit Ihe applieation. TIlC ratings on
the certification label shall be reduced accordingly.
\Vlten rcquircd. intrinsically safe (Ls.) circuits may be fitted with non i.s. circuits when the relevant baITieror air gap is
included and an additional eXlemallabelstating.ll1lrisically
Safe and Non- Intrisically Safe circuits enc1osed'. TIle i.s.
tcnninals may be bille in colour to suit thc application.
The ratings on the cenification label shall be redueed accordingly for the LS circuits.
Altemati\'e/oplionalmarking
®II
when junction box is being usüd for LS. Circuits:
2GD Exe ia Ex tD All T(see schedule) X5°C Tamb -60°C 10 (sec schedule)
Thc enclosures have a maximum dissipated wattage value as folIows:
T6
Enclosure Type
Amb ~O°C
Klin')()nTB 10 - 133
KIiDl)()nmlOA - 150
Klinnon m IOA - 200
Kflnl10nTBII - 150
Klinnon mll - 200
Klinnon TBI1A - 150
KliDDonTUllA - 200
Klinnon TB IIB - 150
KfWl)()nmllB - 200
13.75
13.75
13.75
21
21
21
21
21
21
Maximnm Dissipated Power (Watts)
T6
T5
Cable length per tenniml (M)
Amb 55°C Amb 55°C Amb ~O°C
(Maximnm box diagonal)
T5
13.75
13.75
13.75
21
21
21
21
21
21
&.5
&.5
&.5
13.1
13.1
13.1
13.1
13.1
13.1
1&.9
1&.9
1&.9
28.8
28.8
2&.&
28.&
28.8
2&.8
0.291
0.3&4
0.403
0.446
0.462
0.449
0.466
0.610
0.623
Certificate Number
Baseefa06A TEX0011 X
Issued 28 September
Page 3 of 4
Maximum Dissipated
T6
T6
T5
Amb ~O°C
Amb 55°C
Amb 55°C
29
29
29
29
29
29
29
29
41.7
41.7
93.4
93.4
93.4
29
29
29
29
29
29
29
29
41.7
41.7
93.4
93.4
93.4
IR.I
IR.I
18.1
IR.t
IR.I
18.1
IR.I
IR.I
26
26
5R.3
5R.3
58.3
EneIosure Type
Klinnon TBI2 - 150
Klmoon TU12 - 200
Klinnon TUI2A - 150
Klinnon TUI2A - 200
Klinnon TUI2B - ISO
Klinnon TBI2B - 200
KlioDonTUI2C - ISO
Klinnon TUI2C - 200
Kfi;;'xm TU 13 - 150
Klinnon TU13 - 200
Klinnon TUI4 - ISO
Klimxm TUl4 - 200
Klinnon TUI4 - 300
Power (Watts)
T5
Cable length per tenninal (M)
(Maximum box diagonal)
Amb ~O°C
39.8
39.R
39.R
39.8
39.8
39.R
39.8
39.8
57.3
57.3
12R.4
128.4
12RA
0.605
0.617
0.686
0.697
0.660
0.671
0.557
0.571
0.920
0.928
1.102
I.IOR
1.128
,
maximum numbcr of terminals thai lIla\'
- bc fittcd iuto each encioslirc is calculated using the following
Power = I x N(R, + R ,) Watts
Wliere:
[ = Actual CUffcnt through the conductor up 10 thc maximum ccrtified CUffent for that tcnninal
when litted in an Exe eneIosure (Am ps)
N = Numbcr oftcnninals
Rt
Terminal resistanee (Ohms @ 20°C)
Re = Resislanee of one solid eopper eonduetor (ohms@ 20°C) when using Ihe maximum
box diagonal
nlC
2006
farmuta:
Entry positions and intemaVextcmal carth stud facilitics arc as describcd in the empty cnclosure certificate
Basecfa06ATEXOOIOU. 1110 eneIosures mal' be litted with rail mounted or directed mounted ATEX eenilied eanh
tcnninals 10 suit the application. Whcn rcquircd apower tenninal may be used as a 'clean e:uth' 10 suit the application.
All unnsed entry holes shall be lilled with a snilably eenilied slopping plug as listed on the emply enelosure eenilieate
Baseefa06A TEXOO10U.
A eomponent eertilied Sreather Drain de\'iee as deseribcd in the emptl' enelosure cenilieate Bascefa06ATEXOOIOU mal'
be used.
16
Report Numher
GB/BASfExtrR06.0031/00
17
Special Conditions
I.
When used under dust layers the maximum depth shall be
2.
Uuuscd eables cutries must be litted with the following stopping plugs:
Raxton types CK, CQ, CF aud CH to SIRAOOATEXJ073U. 111eambient temperature rauge ofthejuuetiou
limited to timt of the stopping plug .
.l.
for Safe Use
greater Ilmn 50mm.
Only the following brcathcr is approved for usc wilh these junction boxes:Certificatc No.
Si",OMTEX3019U
4.
00
Code
EEx e IL
Dust IP ratio
6
The breathers must be inslalled in their correel orientalioll in the hottom face ofthe enelosure.
J
box is
Certificate Number
Baseefa06A TEX0011 X
5.
G.
Issued 28 September 2006
Page 4 of 4
All tenninal screws, used and unused, shall bc fully tightencd down by the end user.
Insulatioll of conductors must cxtcnd 10 within 1mm of the metal of the tcnninal Ihr031unless spccificd othcrwise
on the terminal ccrtificatc.
7.
8.
No more than one single or multi-stranded lead shall be connected 10 eithcr sidc of an)' terminal unlcss multiple
conductors havc beeil joined in a suitable manneT, C.g. two conductors iota a single insulatcd bootlace fermle, or
any method indicated on the terminal cenificate,
Tcnninals shall bc installed in such a manner that the creepagc and clearancc distanccs bctwecn the tcmlinal and
adjaceut compoueuts, enelosure walls and covers complying with the requirements of EN 60079-7: 2003 for the
rated voltage of the equipmeut.
9.
Tcnninal temperatures must not cxcccd the operating range specified on thc componcnt ccrtificatc.
10.
All terminals, and accessories such as cross-connectors, shall bc installed in accordance with the terminal
manufactures instmctions. Weidmuller will supply the relevant terminal rnanufacturer's instmctions with each
junction box covered by this certificate.
11.
The maximum voltage, current and dissipated power shown on the rating label must not bc exceeded.
12.
\Vhen connecting conductors of cross section below the maximum allowed for the particular tenninal thell the
maximum amps per pole must bc reduced inline with the maximum amps permitted for a terminal equivalent to
the conductor sizc fitted e.g. If a tennilk11 that can take a 10mm' conductor at ~OAmps is fitted with a ~nlln'
conductor then the CUITentshall be reduced 10 a maximum of 22Amps, or the rating marked on the apparatus
label. whiche"cr is thc lower.
13.
Metallic and non-metallic tnmking may be used inside the junction box providing it is suitable for 80°C and
meets the creepage and c1earance requirements ofEN 60079-7: 2003.
18
Essential Hcalth and Safct~· Re<luircments
All relevant Essential Health and Safety Requiremcnls are covered by the standards Iisted at item 9.
19
Dra\\'in~s and Documcnts
Numhcr
Sheet
Issue
Date
090~000000JAMILY_DAD_TERM
lof2
2
27/09/06
090~OOO(X)OJAMILY_DAD_TERM
20f2
2
27/09/06
'KTB' ENCLSOURE DAD (TERMINAL)
3
27/09106
ATEX/IECEx Cenification Label (KTB)
WMUK-JPB0002
All drawings MC common to and held on IECEx BAS 06.000~X
Dcscription
'KTB' ENCLSOURE DAD (TERMINAL)
Issued 2 September
Page 1 of 2
Certificate Number
Baseefa06A TEX0011 X/1
1
2009
SUPPLEMENT ARY EC - TYPE EXAMINA TION CERTIFICA TE
2
EquilJment
or Protective
System Intended for use in Potentially
Directive 94/9/EC
EXJllosive AtmoSIJheres
3
Supplementary EC - Type
Examination Certificate Number:
Bascefa06A TEXOOIIX/l
4
Equipment or Protective System:
KlilJJlOn TB RANGE OF SHEET METAL TERMINAL
BOXES
5
Manufacturer:
Weidmuller
6
Address:
Klingenbergstrasse
7
This supplementary certificate extends EC - Type Examination Certificate No. Baseefa06A TEXOO11X to .apply to
equipment or protective systems designed and constructed in accordance with' the specification set out in the
Schedule of the said certificate but having any variations specified in the Schedule attached to this certificate and
the documents therein referred to.
JUNCTION
Interface GmbH & Co KG
16,32758 Detmold, Gcrmany.
This supplementary certificate shall be held with the original certificate.
This certificate may only be reproduced in its entirety, without any change, schedule included.
Baseefa Customer Reference No. 4415
Project File No. 09/0665
This certificate is gran ted subject to the genernl tenns and conditions of
Baseefa. It does not necessarily indicate that the equipment may be
used in particular industries or circumstances .
Baseefa
Rockhead Business Park, Staden Lane,
Buxton, Derbyshire SK17 9RZ
Telephone +44 (0) 1298766600
Fax +44 (0) 1298766601
e-mail info@baseefa.com
web site www.baseefa.com
Baseela Is a lradlng name 01 Baseela Ud
Registered in England No. 4305578. Registered address as above.
.~
R S SINCL
r
. DIRECTOR
On behalf of
Baseefa
Issued 2 September 2009
Page 2 of 2
Certificate Number
Baseefa06A TEX0011 X/1
Schedule
13
Certificate Number Baseefa06A TEXOOllX/l
14
15
Variation
Descrilltion
of the variation
to the Elluipment
1.1
To allow the usc of various adaptors/rcduccrs,
enclosure certificatc Baseefa06A TEXOOIOD.
16
stopping plugs and breathcr drain deviccs as specified in the empty
Report Number
GB/BAS/ExTR09/0
17
or Protective System
158/00
Special Conditions for Safe Use
As listed previously and as folIows:
1.
Unused entry holes shall be fitted with stopping plugs as specified in the empty enclosure certificate
Baseefa06A TEXOOIOD. The operating temperature range of the enclosure is limited to that of the stopping plug
fitted.
2.
Only adaptors and reducers as specified in the empty enclosure certificate Baseefa06A TEXOOIOU may be fitted.
The operating temperature range of the enclosure is limited to that of the adaptor/reducer fitted. The entry shall be
suitably sealed to maintain the ingress protection of the enclosure.
3.
Only breather/drain devices as specified in the empty enclosure certificate Baseefa06A TEXOOIOU may be used
with these enclosures. The breather/drain devices must be installed in their correct orientation in either the bottom
face or bottom face gland plate of the enclosure. The operating temperature range of the enclosure is limited to
that of the breather/drain device fitted.
18
Essential Health and Safety Requirements
Compliance with the Essential Health and Safety Rcquirements is not afTected by this variation.
19
None.
Drawings
and Documents
Certificate Number
Baseefa06A TEX0011 X12
SUPPLEMENTARY
2
Equipment
Issued 20 May 2010
Page 1 of 2
EC - TYPE EXAMINATION
or Protective System Intcndcd for use in Potentially
Direclive 94/9/EC
CERTIFICATE
Explosive Atmosphcres
3
Supplementary EC - Type
Examination Certificate Number:
Baseefa06A TEXOOll X/2
4
Equipment or Protective System:
Klippon TB RANGE OF SHEET METAL TERMINAL
BOXES
5
Manufacturer:
Weidmuller
6
Address:
Klingenbergslrasse
7
This supplementary certificate extends EC - Type Examination Certificate No. Baseefa06ATEXOOIIX tO'apply to
equipment or protective systems designed and constructed in accordance with" the specification set out in the
Schedule of the said certificate but having any variations specified in the Schedule attached to this certificate and
the documents therein referred to.
JUNCTIÖN
Interface GmbH & Co KG
16,32758 Delmold, Germany.
This supplementary certificate shall be held with the original certificatc.
This certificate may ooly be reproduced in its entirety. without any change, schedule included.
Baseefa Customer Reference No. 4415
Project File No. 10/0368
This ccrtificate is granted suhjcct to the general terms and conditions of
Basccfa. It ducs not ncccssarily indicatc that the equipmcnt may hc
uscd in particular industries ur circumstances.
Baseefa
Rockhead Business Park, Staden Lane,
Buxton. Derbyshire SK17 9RZ
Telephone +44 (0) 1298766600
Fax +44 (0) 1298766601
e-mail info@baseefa.com
Registered
web site www.baseefa.com
Baseefa is a trading name of Baseefa Ud
in England No. 4305578. Registered address as above.
R S SINCLAIR
DIRECTOR
On behalf of
Baseefa
Certificate Number
Baseefa06A TEX0011 X/2
Issued 20 May 2010
Page 2 of 2
13
Schedule
14
Certificatc Number Baseefa06A TEXOOIIX/2
15
Description of the variation to the Equipment or Protective System
Variation 2.1
To allow alternative ambients T6 Amb 65°C and T5 Amb 65°C:
Enclosure
Type
Kliooon
Kliooon
Klippon
Klippon
Klippon
Kliooon
Kliooon
Kliooon
Klippon
Klippon
Kliooon
Kliooon
Klippon
Klippon
Klippon
Kliooon
Kliooon
Klippon
Klippon
Klippon
Kliooon
Kliooon
TB I0 - 133
TB IOA - 150
TB IOA - 200
TB 11 - 150
TB 11 - 200
TBIIA - 150
TBIIA - 200
TBIIB - 150
TB 11B - 200
TBI2 - 150
TBI2 - 200
TBI2A - 150
TBI2A - 200
TBI2B - 150
TB 12B - 200
TBI2C - 150
TB 12C - 200
TBI3 - 150
TB 13 - 200
TBI4 - 150
TB 14 - 200
TB 14 - 300
16
Report Number
G B/BAS/ExTR I%
17
Maximum Dissioated Power (Watts)
T6
T5
T6
T5
T6
T5
Amb
40°C
Amb
55°C
Amb
55°C
Amb
40°C
Amb
65°C
Amb
65°C
Cable length per
terminal (M)
(Maximum box
diagonal)
13.75
13.75
13.75
21
21
21
2\
21
21
29
29
29
29
29
29
29
29
41.7
41.7
93.4
93.4
93.4
13.75
13.75
13.75
21
21
21
21
2\
21
29
29
29
29
29
29
29
29
41.7
41.7
93.4
93.4
93.4
8.5
8.5
8.5
13.1
13.1
13.1
13.1
13.1
13.1
18.1
18.1
18.1
18.1
18.1
18.1
18.1
18.1
26
26
58.3
58.3
58.3
18.9
18.9
\8.9
28.8
28.8
28.8
28.8
28.8
28.8
39.8
39.8
39.8
39.8
39.8
39.8
39.8
39.8
57.3
57.3
128.4
128.4
128.4
5.1
5.1
5.1
7.8
7.8
7.8
7.8
7.8
7.8
10.8
10.8
10.8
10.8
10.8
10.8
10.8
10.8
15.6
15.6
35.0
35.0
35.0
10.3
10.3
10.3
15.7
15.7
15.7
15.7
15.7
15.7
21.7
21.7
21.7
21.7
21.7
21.7
21.7
21.7
31.2
31.2
70.0
70.0
70.0
0.291
0.384
0.403
0.446
0.462
0.449
0.466
0.610
0.623
0.605
0.617
0.686
0.697
0.660
0.671
0.557
0.571
0.920
0.928
1.102
1.108
1.128
I07/00
Special Condilions
for Safe Use
None additional to those previously listed
18
Essential Healtb and Safety Requirements
Compliance with the Essential Health and Safety Requirements is not atTected by this variation.
19
None
Drawings and Doeuments