The numbers tell
the story
Philips Capri 4", 5", and 6" LED Retrofit/New Construction Luminaires.
80% energy savings, 50,000 hours of continuous use — it’s a compelling story.
Over 300 million opport
to make
A Big Market
According to the D.O.E. there are currently more
than 300 million residential-grade housings installed
in the United States alone. Most are low-efficiency
sources — prime candidates for LED retrofitting.
2
Philips Capri LED
unities
a difference
Philips Capri Makes It Easy
Retrofitting existing incandescent housings is often
complicated, requiring access from above the ceiling.
The Philips Capri CRL LED series of products can be
installed entirely from below the ceiling, and installation
takes only about 60 seconds: the same amount of
LED Retrofit Module
page 5: 4" aperture
page 6: 5” aperture
page 8: 6” aperture
time it takes to change a light bulb.
Efficiency. Two ways.
Quality of Light
The Philips Capri CRL LED series will replace
traditional low-efficacy sources with no shift in quality,
intensity, or distribution of light. They are available
in both 2700K (incandescent) and 3500K (halogen)
correlated color temperatures, and provide a typical
CRI of 85 — equal to or better than compact
fluorescent sources. Plus, they will continue to supply
that performance for more than 50,000 hours of
continuous use.
The Philips Capri CRL LED series is available
for retrofit and new construction applications in
4", 5" and 6" apertures.
Energy Star qualified and California Title 24 compliant/Title 20
listed, the CRL series has also been recognized by Lighting Facts
and is Intertek ETL classified to UL 1598 protocols.
LED New Construction
(housing + LED retrofit module)
page 5: 4” aperture
page 7: 5” aperture
page 9: 6” aperture
Philips Capri LED Retrofit Module & New Construction Housing
3
13 watts of energy.
Exceptional performance.
Superb Color Quality,
Color Rendering, and Light Output
Maximizing Retrofit Potential and Flexibility
The CRL series produces the same light output as a 65 watt BR30
lamp, providing equivalent luminous intensity as well as distribution.
Classification of this LED Retrofit Module allows compliant use with
Philips Capri and many competitive housings, maximizing application
flexibility. Please see page 10 or www.caprilighting.com to see the
full Housing Compatibility chart.
1 LED Module: Multi-chip circuit board assembly
incorporates industry-leading Philips Lumileds LEDs
and provides superb color consistency between
trims. Available in 2700K and 3500K correlated
color temperatures (CCT), the CRL series boasts
an exceptional typical color rendering index (CRI)
of 85. The CRL series also delivers industry-leading
high R9 values for saturated deep reds, which is highly
desirable for residential and retail applications.
2 LED Driver: The CRL series is dimmable to 15%
on many standard incandescent or electronic low voltage
(ELV) switches, ensuring desired lighting effects in retrofit
applications. Driver specifications: 120V, 50/60Hz,
>0.90 power factor, UL8750 compliant class 2.
Verified to be compliant to FCC 47CFR part 15
Class B. Class A noise rating.
2
3 Mixing Chamber: High-efficiency primary optics
provide uniform distribution and unpixilated glare control.
1
4 Lens: Polycarbonate high efficiency lens diffuses
the light into the appearance of a single light source
without pixilated glare.
5
3
7
Sustainable, Reliable
4
6
Unparalleled Versatility
Intertek ETL classified for use in Philips Capri housings as well as those of many competitors, the
CRL series is an ideal choice for retrofitting existing applications. The CRL LED series is rated for
use in insulation contact (IC) and non-IC applications, is suitable for use in air-tight housings, and
is rated for use in wet locations — a whole-application solution.
5
year
4
5-Year Warranty The CRL LED series has been rigorously tested to garner an
industry-leading 5-year warranty applicable to both IC and non-IC applications
(see spec sheet for details).
LED Retrofit Module Features
5 Thermal Management: A large-finned,
yet lightweight, die-cast aluminum heat sink is
engineered to provide maximum thermal management.
In combination with Philips Lumileds LEDs and an
integral LED driver, the CRL series boasts more
than 50,000 hours of L70/B50 lumen maintenance,
as well as 50,000 hours of serviceable life in both
IC and non-IC applications.
6 Die-Cast Lower Trim: Die-cast aluminum trim
assembly is thermally coupled to the upper heat sink to
maximize thermal management. Integral flange provides a
clean aesthetic appeal.
7 Retention: Springs and clips allow for easy,
rigid attachment to the housing and provide positive
retention and a snug fit to the ceiling eliminating
the potential for gaps.
4" LED Retrofit Module
Unlike most similarly-targeted
LED products, the CRL4K-G1
is a true retrofit module.
The 4” module gives customers
the same ease, simplicity and
performance as Philips Capri’s
5- and 6-inch modules.
CRL4K-G1
LED Retrofit Module
CRL4K-G1 Features:
• Die-Cast Heat Sink and lower trim
• 2 color temperatures available
(2700K and 3500K)
• 85 CRI typical
Retrofit applications: Catalog numbers are shown below.
• Dimmable to 15% on ELV or
standard incandescent dimmer
controls (for recommended dimmer
LED Module
Lumens
CRL4K-G1
4" LED Module
6
600 lumens
nominal
Color
Temperature
Voltage
27K
2700 Kelvin
BLANK
120 Volt
list, see spec sheet or page 10).
• cETLus classified for use in
wet locations
• For use in IC and non-IC applications
5
year
35K
3500 Kelvin
5-year manufacturer’s
warranty applicable to IC
and non-IC applications
up to 35ºC maximum ambient.
Example: CRL4K-G1-6-27K
No voltage designation is required when building
a catalog number (see ordering example above).
All Philips Capri LED retrofit modules are 120 volt.
NOTE: The Philips Capri 4" LED Retrofit Module is
compatible with multiple triac and electronic low voltage
dimmers. See spec sheet or page 10 for complete listing.
4" LED New Construction
(housing + LED retrofit module)
New construction: Begin with a 4" housing, followed by the LED retrofit module.
R4QP-LED-G1 + CRL4K-G1
4" housing shown
with LED Retrofit Module.
These 4" housings are specifically
engineered to accept the LED
Retrofit Module featured above.
New construction applications require
a housing and an LED Retrofit Module.
Order both components as shown.
Housing
LED Module 1
Lumens
R4QP-LED-G1
4" recessed housing,
new construction
CRL4K-G1
4" LED module
6
600 lumens
nominal
RR4QP-LED-G1
4" remodel housing
Color
Temperature
Voltage
27K
2700 Kelvin
BLANK
120 Volt
35K
3500 Kelvin
Example: RR4QP-LED-G1 CRL4K-G1-6-27K
1. Housing and CRL4K-G1 module are ordered
and shipped as separate line items.
No voltage designation is required when building
a catalog number (see ordering example above).
All Philips Capri LED retrofit modules are 120 volt.
NOTE: The Philips Capri 4" LED Retrofit Module is
compatible with multiple triac and electronic low voltage
dimmers. See spec sheet or page 10 for complete listing.
Philips Capri 4" LED Retrofit Module and New Construction Housings
5
5" LED Retrofit Module
S P L A Y O ptio n s
The CRL5K-G1 is an ideal solidstate retrofit solution. It is also
suitable for new construction
applications. Please see facing
page to order.
CRL5R-WHT
White Reflector, Spun Aluminum
CRL5K-G1 Features:
• Die-Cast Heat Sink and lower trim
CRL5R-BLK
• 2 color temperatures available
Black Reflector, Spun Aluminum
(2700K and 3500K)
• 85 CRI typical
• Dimmable to 15% on ELV or
standard incandescent dimmer
CRL5R-CLR
Clear Specular Reflector, Spun Aluminum
controls (for recommended dimmer
list see spec sheet or page 10).
• cETLus classified for use in wet locations
• For use in IC and non-IC applications
5
CRL5K-G1
LED Retrofit Module
year
CRL5R-GLD
Gold Reflector, Spun Aluminum
5-year manufacturer’s
warranty applicable to IC
and non-IC applications
up to 35ºC maximum ambient
CRL5B-WHT
White Baffle, Spun Aluminum
Delivering 600 nominal lumens and a wide beam angle, the CRL5K provides the same
quality of light as a typical 6" housing, in an architectural 5" aperture.
CRL5B-BLK
Black Baffle, Spun Aluminum
Retrofit applications: Catalog number begins with the LED retrofit module listed below, followed by splay options as shown.
LED Module 1
Lumens
CRL5K-G1
5" LED Module
6
600 lumens
nominal
Color
Temperature
Voltage
Splay 1
Style
Finish
27K
2700 Kelvin
BLANK
120 Volt
CRL5
5" LED Module
Splay Insert
R
Reflector
WHT
White
B
Baffle2
BLK
Black
35K
3500 Kelvin
CLR
Clear
Example: CRL5K-G1-6-35K CRL5R-CLR
1. CRL5K-G1 module and accessory splay are
ordered and shipped as separate line items.
2. Baffle available in white or black only.
No voltage designation is required when building a
catalog number (see ordering example above).
All Philips Capri LED retrofit modules are 120 volt.
6
Philips Capri 5" LED Retrofit Module
NOTE: The Philips Capri 5" LED Retrofit
Module is compatible with multiple triac and
electronic low voltage dimmers. See spec
sheet or page 10 for complete listing.
GLD
Gold
5" LED New Construction
(housing + LED retrofit module)
S P L A Y O ptio n s
The 5" housings below are
specifically engineered to accept
the CRL5K-G1 Module featured
on the previous page.
CRL5R-WHT
White Reflector, Spun Aluminum
Housing Features:
• Housings are ETL listed for use with the
CRL5K Module and marked for 13W
maximum input power
CRL5R-BLK
Black Reflector, Spun Aluminum
• Includes quick connectors for fast and
easy installation
• Compliant to California Title 24 - 2008
• Ideal choice for applications requiring
lighting power density calculations
CRL5R-CLR
Clear Specular Reflector, Spun Aluminum
(LPD, W/ft2) such as LEED and
ASHRAE 90.1
• Omission of lamp holder allows for
CR5QP-LED-G1 + CRL5K-G1
5" housing shown with LED Retrofit Module.
high-efficacy lighting options only
CRL5R-GLD
Gold Reflector, Spun Aluminum
• cETL listed for IC, non-IC, and
AirSeal
TM
applications.
CRL5B-WHT
White Baffle, Spun Aluminum
New construction applications require a housing and a CRL5K LED Retrofit Module.
Order both components as shown below.
CRL5B-BLK
Black Baffle, Spun Aluminum
New construction: Catalog number begins with a 5" housing, followed by the LED retrofit module and splay options as shown.
Housing 1
LED Module 1
Lumens
CR5QP-LED-G1
5" recessed housing,
new construction
CRL5K-G1
5" LED Module
6
600 lumens
nominal
CRR5QP-LED-G1
5" remodel housing
Color
Temperature
Voltage
Splay 1
Style
Finish
27K
2700 Kelvin
BLANK
120 Volt
CRL5
5" LED Module
Splay Insert
R
Reflector
WHT
White
B
Baffle2
BLK
Black
35K
3500 Kelvin
Example: CR5QP-LED-G1 CRL5K-G1-6-27K CRL5R-CLR
1. Housing, CRL5K-G1 module and accessory splay
are ordered and shipped as separate line items.
2. Baffle available in white or black only.
NOTE: The Philips Capri 5" LED Retrofit
Module is compatible with multiple triac and
electronic low voltage dimmers. See spec
sheet or page 10 for complete listing.
CLR
Clear
GLD
Gold
No voltage designation is required when building a
catalog number (see ordering example above).
All Philips Capri LED retrofit modules are 120 volt.
Philips Capri 5" LED Retrofit-Ready New Construction Housings
7
6" LED Retrofit Module
S P L AY O P T I O n S
The CRL6K-G2 is an ideal solidstate retrofit solution. It is also
suitable for new construction
applications. Please see facing
page to order.
CRL6R-WHT
WhiteReflector,SpunAluminum
CRL6K-G2 Features:
• Die-CastHeatSinkandlowertrim
CRL6R-BLK
• 2colortemperaturesavailable
BlackReflector,SpunAluminum
(2700K and 3500K)
• 85CRItypical
• Dimmableto15%onELVor
standard incandescent dimmer
CRL6R-CLR
ClearSpecularReflector,SpunAluminum
controls (for recommended dimmer
list see spec sheet or page 10).
• cETLusclassifiedforuseinwetlocations
• ForuseinICandnon-ICapplications
CRL6K-G2
LED Retrofit Module
5
year
CRL6R-GLD
GoldReflector,SpunAluminum
5-year manufacturer’s
warranty applicable to IC
and non-IC applications
up to 40ºC maximum ambient
CRL6B-WHT
WhiteBaffle,SpunAluminum
Classification of this module allows for compliant use with Philips Capri and many competitive
housings. See page 10 or www.caprilighting.com for the full Housing Compatibility chart.
CRL6B-BLK
BlackBaffle,SpunAluminum
Retrofit applications: Catalog number begins with the LED retrofit module listed below, followed by splay options as shown.
LED Module 1
Lumens
CRL6K-G2
6" LED Module
Generation 2
6
600 lumens
nominal
Color
Temperature
Voltage
Splay 1
Style
Finish
27K
2700 Kelvin
BLANK
120 Volt
CRL6
6" LED Module
SplayInsert
R
Reflector
WHT
White
B
Baffle2
BLK
Black
35K
3500 Kelvin
CLR
Clear
Example: CRL6K-G2-6-27K CRL6B-WHT
1. CRL6K-G2 module and accessory splay are
ordered and shipped as separate line items.
2. Baffle available in white or black only.
No voltage designation is required when building a
catalog number (see ordering example above).
All Philips Capri LED retrofit modules are 120 volt.
8
Philips Capri 6" LED Retrofit Module
NOTE: The Philips Capri 6" LED Retrofit
Module is compatible with multiple triac and
electronic low voltage dimmers. See spec
sheet or page 10 for complete listing.
GLD
Gold
6" LED New Construction
(housing + LED retrofit module)
S P L A Y O ptio n s
These 6" housings are specifically
engineered to accept the
CRL6K Module featured on
the previous page.
CRL6R-WHT
White Reflector, Spun Aluminum
Housing Features:
• Recessed housings are ETL listed
for use with the Retrofit Module and
marked for 13W maximum input power
CRL6R-BLK
Black Reflector, Spun Aluminum
• Includes quick connectors for fast and
easy installation
• Compliant to California Title 24 - 2008
• Ideal choice for applications requiring
lighting power density calculations
CRL6R-CLR
Clear Specular Reflector, Spun Aluminum
(LPD, W/ft2) such as LEED and
ASHRAE 90.1
• Omission of lamp holder allows for
high-efficacy lighting options only
CRL6R-GLD
Gold Reflector, Spun Aluminum
• cETL listed for IC, non-IC, and
AirSeal
CR1QP-LED-G2 + CRL6K-G2
6" housing shown with LED Retrofit Module.
TM
applications.
CRL6B-WHT
White Baffle, Spun Aluminum
New construction applications require a housing and an LED Retrofit Module.
Order both components as shown below.
CRL6B-BLK
Black Baffle, Spun Aluminum
New construction: Catalog number begins with a 6" housing, followed by the LED retrofit module and splay options as shown.
Housing 1
LED Module 1
Lumens
CR1QP-LED-G2
6" recessed housing,
new construction
CRL6K-G2
6" LED module
Generation 2
6
600 lumens
nominal
CRR1QP-LED-G2
6” remodel housing
Color
Temperature
Voltage
Splay 1
Style
Finish
27K
2700 Kelvin
BLANK
120 Volt
CRL6
6" LED Module
Splay Insert
R
Reflector
WHT
White
B
Baffle2
BLK
Black
35K
3500 Kelvin
Example: CR1QP-LED-G2 CRL6K-G2-6-27K CRL6B-WHT
1. Housing, CRL6K-G2 module and accessory splay
are ordered and shipped as separate line items.
2. Baffle available in white or black only.
NOTE: The Philips Capri 6" LED Retrofit
Module is compatible with multiple triac and
electronic low voltage dimmers. See spec
sheet or page 10 for complete listing.
CLR
Clear
GLD
Gold
No voltage designation is required when building a
catalog number (see ordering example above).
All Philips Capri LED retrofit modules are 120 volt.
Philips Capri 6" LED Retrofit-Ready New Construction Housings
9
6" LED Module Compatibility & Dimming
6" CRL6K Housing Compatibility Chart 1
Manufacturer
SKU
Capri
CR1
CR1NB
CR1QP
CR1NBQP
CRR1
CRR1NB
CRR1QP
CRR1NBQP
QL1
QL1NB
QL1QP
QL1NBQP
Halo
H7ICT
H7ICAT
H7TCP
H7RICAT
H7RT
H7RICT
Edison
E1700 Series
Juno
IC22
IC22W
IC22R
IC22S
Elite
B6
B6IC
Elco
SeaGull
QL6
QL6NB
QL6QP
QL6NBQP
PR75ASIC
PR75ASICNB
R10
R10IC
RR10
RR10IC
R150ASIC
FDIC6V90
IC23
IC23W
IC2
IC2W
TC2
TC2W
TC2R
B6000-IC
B6IC-100
B6R
B6RIC
EZ6IC
EZ6RIC
EL7IC100A
EL7IC
EL7ICA
EL7RICA
R10H
RR10H
11028
11028QC
1128
1128QC
11018
11008
11017
Dimming Information for 4", 5" and 6" Modules
FollowingisalistofstandardincandescentleadingedgedimmersrecommendedforusewiththeCRL4K-G1,CRL5K-G1,andCRL6K-G2:
Leviton, Illumitech Series (Part numbers IPI06-XXX)
Leviton, Trimatron Series (Part numbers 6602-X, 6681-X, 6683-X, 6684-X, 700-X and 705-X)
Leviton, SureSlide Series (Part Numbers 6631, 6633)
Lutron Skylark Series (Part Number S-600, S2-LH)
Cooper, Aspire Series (Part numbers 9530XXX)
ThefollowingElectronicLowVoltage(ELV)dimmersarealsorecommendedforusewiththe CRL4K-G1, CRL5K-G1, and CRL6K-G2:
Lutron Nova T Series (Part number NTELV-600)
Lutron Faedra (Part Number FAELV-500-XX)
Leviton Vizia (Part Number VPE04)
1. Competitor catalog numbers verified at the time of printing.
10
Philips Capri LED Module Compatibility & Dimming Information
4" & 5" Module Compatibility
4" CRL4K Housing Compatibility Chart1
5" CRL5K Housing Compatibility Chart1
Manufacturer
SKU
RR4
Capri
CR5QP
QL5QP
H99RTAT
Halo
H5ICAT
H5T
EI400ATSB
All Pro
EI500AT
Juno
TC1
Lithonia
L5
Elite
B4IC
B4
Juno
TC20
Elco
EL99ICA
EL99
Elite
B5IC
B5
Nora
NS-401QAT
NSIC-401QAT
Elco
EL5ICA
R5H
SeaGull
1179
1105
Nora
NH-501Q
NHIC-501QAT
SeaGull
11128
11107
Manufacturer
SKU
Capri
R4ASIC
R4
Halo
H99TAT
H99ICAT
All Pro
R5
1. Competitor catalog numbers verified at the time of printing.
Philips Capri LED Module Compatibility Information
11
776 South Green Street
Tupelo, MS 38802
p. 662.842.7212
f. 662.841.5501
www.caprilighting.com
189 Bullock Drive
Markham, Ontario L3P 1W4
p. 905.294.9570
f. 905.294.9811
www.day-britecanada.com
This brochure was printed on FLO recycled paper.
FLO is an environmentally responsible paper
containing 10% Post Consumer Waste.
FLO is 3rd party certified to come from a well
managed forest.
©2011 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: C33.0412.CT5M