LPS Lighting
Roadway
Page 45
LPS
Sunset
Page 44
Vista
Page 46
43
LPS Lighting
Sunset
Dimensional Drawings
Fixture
SUN-1
SUN-2
SUN-3
SUN-4
Listed for wet locations
LPS
The Sunset family of luminaires are designed to maximize the benefits of
low pressure sodium light sources with unmatched lumens per watt, low
glare, and energy-saving performance. An excellent choice for roadways,
streetlighting, bridges, general area lighting, and applications requiring large
numbers of fixtures with very economical electrical usage and environmentally-friendly Dark Sky compliance.
LENS: Clear, impact resistant Lexan, secured with galvanized lens retainers, and sealed with form fitting silicone gasketing.
FIXTURE: Precision CNC sheared and formed .080 gauge aluminum
housing and door assembly. Available in four sizes for different wattages.
All external hardware is stainless steel.
A
B
C
24”
15”
9”
29”
15”
29”
52”
20”
15”
Max. Watt EPA
55w
2.0
9”
90w
2.3
9”
9”
2 x 90w
180w
2.7
3.7
MOUNTING ARM: Extruded aluminum bolt-on arm. Optional yoke mount
and parallel pole mount.
OPTICS: Precision CNC cut and bent , multi-faceted, segmented, 95%
reflective aluminum reflector for IES Types III and IV light distribution.
FINISH: Durable Quali-Guard® thermoset polyester powder coat textured
finish in a selection of architectural colors.
LAMP: LPS lamps from 55 through 180 watts, providing high lumens per
watt, superior energy efficiency, and quick restrike.
BALLAST: HPF high reactance auto transformer, factory wired and tapped
to voltage requirement.
t
Optics
Wattage
Source
Voltage
Mounting
Finish
Options
Model
Optics
Wattage
Source
Voltage
Mounting
Finish
Options
SUN-1
Type III
(T3)
120
(1)
Bolt-On-Arm
(BOA)
Model No.
SUN
55 (55)
LPS
(L)
208
(2)
SUN-2
Type IV
(T4)
90 (90)
240
(3)
277
(4)
SUN-3
90 x 2 (90 x 2)
480
(5)
Parallel Pole
Mount
(PPM)
Yoke Mount
(YM)
Bronze
(BZ)
Black
(BK)
White
(WH)
Green
(GN)
Grey
(GY)
Silver Metallic
(SL)
Photocell & Receptacle
Custom
(CC)
Light Shield
(LS)
*Specify voltage
(PC120)
(PC208)
(PC240)
(PC277)
(PCR480)
Photo Receptacle
(PER)
*With Shorting Cap
Terminal Block
(TB)
Fusing
*Single In-Line Fuse
*Specify voltage
M.Tap*
(6)
(SF120)
(SF277)
*Double In-Line Fuse
*Specify voltage
SUN-4
180 (180)
*Type IV distribution is typically used
when fixtures are
Parallel Pole
Mount .
*Note:Ballasts come
standard 135/180w,
90w, & 35/55w.
*Multi-Tap
ballast is
standard and
factory wired at
277 volts
unless other
voltage is
specified.
(DF208)
(DF240)
(DF480)
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fixtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this
information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.
VISIONAIRE LIGHTING
44
19645 Rancho Way • Rancho Dominguez, CA • 90220
Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.com
LPS Lighting
Roadway
Dimensional Drawings
Fixture
RDW-1
RDW-2
RDW-3
Listed for wet locations
A
B
C
34”
9.5”
5.5”
Max. Watt EPA
55w
1.2
39”
9.5”
5.5”
90w
1.4
63”
9.5”
5.5”
180w
2.0
Roadway luminaires are designed to maximize the benefits of low pressure sodium light sources with unmatched lumens per watt, low glare and
energy-saving performance. An ideal choice for roadways, streetlighting,
bridges, general site lighting, and applications requiring large numbers of
fixtures with very economical electrical usage and environmentally-friendly
Dark Sky compliance.
MOUNTING ARM: Cast aluminum mast arm fitter.
LENS: Clear, impact resistant Lexan, secured with galvanized lens retainers, and sealed with form fitting silicone gasketing.
LAMP: LPS lamps from 55 through 180 watts, providing high lumens per
watt, superior energy efficiency and quick restrike.
FIXTURE: Durable cast aluminum housing. Precision CNC sheared and
formed .080 gauge aluminum door assembly with integral latches for
tool-less access. Three housing sizes for different wattages. All external
hardware is stainless steel.
BALLAST: HPF high reactance auto transformer, factory wired and tapped
to voltage requirement.
t
Optics
Wattage
Source
FINISH: Durable Quali-Guard® thermoset polyester powder coat textured
grey finish.
Voltage
Mounting
RDW
Optics
RDW-1
Type III
(T3)
Wattage
55 (55)
Source
LPS
(L)
Voltage
120
(1)
208
(2)
240
(3)
90 (90)
277
(4)
480
(5)
M.Tap*
(6)
RDW-3
Options
GY
Model
RDW-2
Finish
135 (135)
180 (180)
*Note:Ballasts come
standard 135/180w,
90w, & 35/55w.
Mounting
Mast-Arm-Fitter
Finish
Options
Grey (GY)
Photocell & Receptacle
*Specify voltage
(PC120)
(PC208)
(PC240)
(PC277)
(PCR480)
Photo Receptacle
(PER)
*With Shorting Cap
Terminal Block
(TB)
Removable Ballast Tray
(RBT)
Fusing
*Single In-Line Fuse
*Specify voltage
(SF120)
(SF277)
*Double In-Line Fuse
*Specify voltage
*Multi-Tap
ballast is
standard and
factory wired at
277 volts
unless other
voltage is
specified.
(DF208)
(DF240)
(DF480)
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fixtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this
information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.
VISIONAIRE LIGHTING
19645 Rancho Way • Rancho Dominguez, CA • 90220
Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.com
45
LPS
Model No.
OPTICS: Precision CNC cut and bent, multi-faceted, segmented, 95%
reflective aluminum reflector for IES Type III distribution.
LPS Lighting
Vista
Dimensional Drawings
Fixture
VIS-1
VIS-2
VIS-3
VIS-4
*Fixture only available
parallel wall mount
Listed for wet locations
Vista wall mount luminaires are designed to maximize the benefits of low
pressure sodium lamps with unmatched lumens per watt, low glare, and
energy-saving performance. An excellent choice for transportation tunnels,
highway underpasses, underground walkways, and applications requiring
large numbers of fixtures with very economical electrical usage.
LENS: Clear, impact resistant Lexan, secured with aluminum lens retainers,
and sealed with form fitting silicone gasketing.
LPS
FIXTURE: Precision CNC sheared and formed .080 gauge aluminum
housing. Available in four sizes for different wattages. All external hardware
is stainless steel.
A
B
C
Max. Watt
EPA
36”
6”
6”
55w
N/A
36”
6”
6”
90w
N/A
48”
6”
6”
135w
N/A
58”
6”
6”
180w
N/A
MOUNTING: Parallel wall mount.
OPTICS: Reflector is precision CNC cut and bent, multi- faceted, segmented,
95% reflective aluminum for IES Type III distribution.
FINISH: Durable Quali-Guard® thermoset polyester powder coat textured
finish in a selection of architectural colors.
LAMP: LPS lamps from 55 through 180 watts, providing high lumens per
watt, exceptional energy efficiency, and rapid restrike.
BALLAST: HPF high reactance auto transformer, factory wired and tapped
to voltage requirement.
t
Optics
Wattage
Source
Voltage
Mounting
Finish
Options
Model
Optics
Wattage
Source
Voltage
Mounting
Finish
Options
VIS-1
Type IV
(T4)
120
(1)
Parallel Wall
Mount
Bronze (BZ)
Photocell & Receptacle
(PWM)
Black (BK)
(PC120)
(PC208)
(PC240)
(PC277)
(PCR480)
Model No.
VIS
55 (55)
LPS
(L)
208
(2)
VIS-2
90 (90)
240
(3)
277
(4)
VIS-3
*Specify voltage
White (WH)
Green (GN)
Grey (GY)
Silver Metallic
(SL)
Custom (CC)
135 (135)
480
(5)
Photo Receptacle
(PER)
Terminal Block
(TB)
Lightly Diffused Lens
(LDL)
Fusing
*Single In-Line Fuse
*Specify voltage
M.Tap*
(6)
(SF120)
(SF277)
*Double In-Line Fuse
*Specify voltage
VIS-4
180 (180)
*Note:Ballasts come
standard 135/180w,
90w, & 35/55w.
*Please consult
factory for other
light source options.
*Multi-Tap
ballast is
standard and
factory wired at
277 volts
unless other
voltage is
specified.
(DF208)
(DF240)
(DF480)
For more detailed information on mounting, wiring, or installation instructions, please consult factory. Note that if Poles are not ordered with fixtures, please specify the mounting requirements. This document contains proprietary information of Visionaire Lighting, LLC. Any use of this
information requires the written approval of Visionaire Lighting, LLC. In keeping with our TQM policy of continuous improvement, Visionaire reserves the right to change any specifications contained herein without prior notice.
VISIONAIRE LIGHTING
46
19645 Rancho Way • Rancho Dominguez, CA • 90220
Tel: (310) 512-6480 • Fax: (310) 512-6486
www.visionairelighting.com