Lifting Column TC16
24 Vdc – load up to 2000N
Lifting Column TC16
24 Vdc – load up to 2000N
Lifting Column DMD
12, 24 and 36 Vdc – load up to 6800N
Lifting Column DMD
12, 24 and 36 Vdc – load up to 6800N
Lifting Column DMA
230 and 400 Vdc – load up to 6800N
Lifting Column DMA
230 and 400 Vdc – load up to 6800N
Ordering Keys
Lifting Columns
Electrical Wiring Diagrams
Leads can be either color or number marked. Connect black (1) lead
to L1 & white (3) lead to N (neutral) to extend the actuator. Change L1
from lead black (1) to lead red (2) to retract the actuator if the actuator
is equipped with an anti coats brake, release the brake by connection
orange (4) lead to L1
Leads can be either color or number marked. Connect white (1) to L1.
Red (2) to L2 and black (3) to L3 to extend the actuator. Change the
places of white (2) lead and black (3) to retract the actuator. If the
actuator is equipped with anti coast brake, release the brake by
connecting orange (4) to neutral (N).
*On DMA there are no anti coast brake on acme models while ball screw models always are equipped with an anti coast brake.
Connect the brown lead to positive and blue to negative to extend
the actuator. Change polarity to retract the actuator.
Connect the green lead to positive and red to negative to extend
the actuator. Change polarity to retract the actuator, If using the
connector supplied, each motor lead must be connected to two
pins in the connector. The encoder is supplied with 5-18 Vdc on
pin 3 and 5 and the two pulse train signals are generated on pin 7
d8
Actuator Controls
General
Actuator Controls
Switches







Robust switch
Double pole, double throw (DPDT)
15A rating at 270 Vac
Center “off”
Two momentary contacts
Wiring diagram on label
Part number 830-8004-016
Actuator Controls
Electronic Controls
 Rugged and robust control designed to operate
under the hardest conditions
 Auto shut off function if the current or duty cycles
limits of the control is exceeded.
 Robust plastic enclosure
 Versions for DC or AC supply voltage
 Versions with or without limit switch inputs
 Versions with or without control pendant
 TC16 & DND columns are compatible
Actuator Controls
Electronic Controls
DMD – Acme Screw Models
DMD – Ball Screw Models
DMA – Ball Screw Models
Ncycle: lift in number of cycles (one cycle = extend & retract)
F max: percent of maximum rated load
1: all models using the clutch at end of stroke
2: all models using the anit0coast brake at end of stroke only.
Contact customer service if you need life estimates for acme screw
models or for higher loads or longer stroke lengths.
Request separate cataolge for:
1) Electrak Non-driven
Actuator FA14 Load up to 6800N
 Actuator with a flange where a customer supplied motor can be
mounted (stepper, servo, brushed)
 Rugged and robust
 Withstands very harsh environments
 Stainless steel extension tube
 Acme or ball screw drive
 Trunnion mounting possible
 Overload clutch for mid and end of stroke protection
 T-slot grooves in the cover tube for magnetic sensors
 Maintenance free
 Strokes to 600mm
 Speeds to 32,,/sec
 Load to 18,000N
2) Rodless Actuator LM80-V
12 & 24 Vdc – load up to 2000N











Rodless actuator
Horizontal or vertical operation
Fir use in domestic, office or medical applications
Rigid self supporting extruded aluminum profile
Durable and corrosion free
Holding brake prevents downward motion at power off
Lightweight and quiet operation
Safety nut on ball screw version
Easy and fast T-slot mounting
Optional spline safety function
Maintenance free
Direct Drive Rotary Motors
 Housed
 Cartridge style
 Frameless F series
 Hollow bore spindle
 Torque to 1300Nm
AKD Drives
 3 to 80 amps continuous
 240/1/50 & 415/3/50 AC mains
 All feedback types in one model
 Three times peak current
 Ethernet communication std
 Small package size
Precision planetary reducers
 4 to 15 arc-min backlash
 In-line and right angle
 Quick delivery program
 Sizes 42 to 222 mm square frame
 Up to 5500Nm peak
AKM Series Motor
 New high efficiency design
 Simple and robust construction
 7 frames, 40 to 188 mm square
 Multiple feedback types
 Ball or lead screw
 Inline, geared or belt driven
 Brushless Servo or Stepper motors
 IP54 or IP65
 Thrust to 25kN
 Speed to 1.3m/sec
 6 power ranges
 Metric design
Page 16 of 16