Baying systems TS 8
System accessories Page 537 TS 8 corner enclosures Page 583 TS 8 stainless steel Page 194 TS 8 EMC-shielded Page 200
Protection category:
IP 55 to IEC 60 529,
complies with NEMA 12.
Supply includes:
Enclosure frame with door(s),
3 mm double-bit lock insert
Mounting plate
Gland plates
Rear panel
Roof plate
4 eyebolts
Approvals:
UL
CSA
TÜV
Russian Maritime Register
of Shipping
TÜV Mark
Lloyds Register of Shipping
Bureau Veritas
VDE
Germanischer Lloyd
F
T
B
G
Surface finish:
Enclosure frame:
Dipcoat-primed
Door, roof and rear panel:
Dipcoat-primed, powdercoated on the outside,
textured paint
Mounting plate and gland
plates: Zinc-plated
Colour:
RAL 7035
H
Material:
Enclosure frame, roof, rear
panel and gland plates:
Sheet steel, 1.5 mm
Door: Sheet steel, 2.0 mm
Mounting plate: Sheet steel,
3.0 mm
Detailed drawings:
Available on the Internet.
Height: 1200 mm/1400 mm, depth: 500 mm
Width (B) mm
600
800
1200
600
800
1200
Height (H) mm
Packs of
1200
1200
1200
1400
1400
1400
Depth (T) mm
500
500
500
500
500
500
Mounting plate width (F) mm
499
699
1099
499
699
1099
Mounting plate height (G) mm
1
Model No. TS
Door(s)
1096
1096
1096
1296
1296
1296
8615.500
8815.500
8215.500
8645.500
8845.500
8245.500
Page
1
1
2
1
1
2
74.5
92.1
140.0
86.0
107.5
163.5
2
8115.235
8115.235
8115.235
8145.235
8145.235
8145.235
567
Height 100 mm
1 set
8601.600
8601.800
8601.200
8601.600
8601.800
8601.200
543
Height 200 mm
1 set
8602.600
8602.800
8602.200
8602.600
8602.800
8602.200
543
Height 100 mm
1 set
8601.050
8601.050
8601.050
8601.050
8601.050
8601.050
544
Height 200 mm
1 set
8602.050
8602.050
8602.050
8602.050
8602.050
8602.050
544
717
Weight (kg)
Walls
Side panels
Base/plinth
Components front and rear
Trim panels, sides
Flex-Block
see page 540
Levelling component for base/plinth
see page 546
Accessories
Cable clamp rails for cable clamps
2
4191.000
4192.000
4196.000
4191.000
4192.000
4196.000
Cable clamp rails (C section) for cable clamps
6
4944.000
4945.000
4947.000
4944.000
4945.000
4947.000
653
1 set
8802.065
8802.085
8802.1251)
8802.065
8802.085
8802.1251)
703
Section for cable entry, rear
Support strips for door
20
4596.000
4598.000
4596.000
4596.000
4598.000
4596.000
614
Wiring plan pocket, sheet steel
1
4116.X00
4118.X00
4116.X00
4116.X00
4118.X00
4116.X00
617
180° hinges
4
8800.190
8800.190
8800.190
8800.190
8800.190
8800.190
613
4583.500
4583.500
617
System lights
Door stay for escape routes
see page 679
1
4583.500
4583.500
4583.500
4583.500
Earth straps
see page 689
Alternative lock systems
see page 600
1)
Packs of 2 sets
72
Rittal Catalogue 33/Enclosures
Baying systems TS 8
Height: 1600 mm, depth: 500 mm
Width (B) mm
600
800
1200
Height (H) mm
Packs of
1600
1600
1600
Depth (T) mm
500
500
500
Mounting plate width (F) mm
499
699
1099
Mounting plate height (G) mm
1
Model No. TS
Page
1496
1496
1496
8665.500
8865.500
8265.500
Door(s)
1
1
2
100.0
103.0
159.3
2
8165.235
8165.235
8165.235
567
Height 100 mm
1 set
8601.600
8601.800
8601.200
543
Height 200 mm
1 set
8602.600
8602.800
8602.200
543
Height 100 mm
1 set
8601.050
8601.050
8601.050
544
Height 200 mm
1 set
8602.050
8602.050
8602.050
544
717
Weight (kg)
Walls
Side panels
Base/plinth
Components front and rear
Trim panels, sides
Flex-Block
see page 540
Levelling component for base/plinth
see page 546
Accessories
Cable clamp rails for cable clamps
2
4191.000
4192.000
4196.000
Cable clamp rails (C section) for cable clamps
6
4944.000
4945.000
4947.000
653
1 set
8802.065
8802.085
8802.1251)
703
Section for cable entry, rear
Support strips for door
20
4596.000
4598.000
4596.000
614
180° hinges
4
8800.190
8800.190
8800.190
613
1
4583.500
4583.500
617
System lights
see page 679
Door stay for escape routes
4583.500
Earth straps
see page 689
Alternative lock systems
see page 600
1)
Packs of 2 sets
Height: 1800 mm, depth: 400 mm
Width (B) mm
600
800
1000
1000
1200
Height (H) mm
Packs of
1800
1800
1800
1800
1800
Depth (T) mm
400
400
400
400
400
Mounting plate width (F) mm
499
699
899
899
1099
Mounting plate height (G) mm
1
Model No. TS
Door(s)
Weight (kg)
1696
1696
1696
1696
1696
8684.500
8884.500
8084.500
8080.500
8284.500
1
1
1
2
2
91.3
113.5
136.4
140.0
170.6
Page
Walls
Side panels
2
8184.235
8184.235
8184.235
8184.235
8184.235
567
Divider panel
1
8609.840
8609.840
8609.840
8609.840
8609.840
571
1
8610.680
8610.880
–
–
–
584
Height 100 mm
1 set
8601.600
8601.800
8601.000
8601.000
8601.200
543
Height 200 mm
1 set
8602.600
8602.800
8602.000
8602.000
8602.200
543
Height 100 mm
1 set
8601.040
8601.040
8601.040
8601.040
8601.040
544
Height 200 mm
1 set
8602.040
8602.040
8602.040
8602.040
8602.040
544
717
Doors
Glazed door
Base/plinth
Components front and rear
Trim panels, sides
Flex-Block
see page 540
Levelling component for base/plinth
see page 546
Accessories
Cable clamp rails for cable clamps
2
4191.000
4192.000
4336.000
4336.000
4196.000
Cable clamp rails (C section) for cable clamps
6
4944.000
4945.000
4946.000
4946.000
4947.000
653
1 set
8802.065
8802.085
8802.1051)
8802.1051)
8802.1251)
703
614
Section for cable entry, rear
Support strips for door
20
4596.000
4598.000
4599.000
4309.000
4596.000
Wiring plan pocket, sheet steel
1
4116.X00
4118.X00
4124.000
4115.X00
4116.X00
617
180° hinges
4
8800.190
8800.190
8800.190
8800.190
8800.190
613
1
4583.500
4583.500
4583.500
4583.500
617
System lights
Door stay for escape routes
see page 679
4583.500
Earth straps
see page 689
Alternative lock systems
see page 600
1)
Packs of 2 sets
Rittal Catalogue 33/Enclosures
73
Baying systems TS 8
Height: 1800 mm, depth: 500 mm
Width (B) mm
400
600
800
800
1200
Height (H) mm
Packs of
1800
1800
1800
1800
1800
Depth (T) mm
500
500
500
500
500
–
499
699
699
1099
Mounting plate width (F) mm
Mounting plate height (G) mm
1
Model No. TS
Door(s)
Weight (kg)
–
1696
1696
1696
1696
8485.5101)
8685.500
8885.500
8880.500
8285.500
1
1
1
2
2
49.2
93.8
115.8
122.5
173.3
Page
Walls
Side panels
2
8185.235
8185.235
8185.235
8185.235
8185.235
Divider panel
1
8609.850
8609.850
8609.850
8609.850
8609.850
567
571
Divider panel for module plates
1
8609.100
8609.100
8609.100
8609.100
8609.100
572
1
–
8610.680
8610.880
–
–
584
Height 100 mm
1 set
8601.400
8601.600
8601.800
8601.800
8601.200
543
Height 200 mm
1 set
8602.400
8602.600
8602.800
8602.800
8602.200
543
Height 100 mm
1 set
8601.050
8601.050
8601.050
8601.050
8601.050
544
Height 200 mm
1 set
8602.050
8602.050
8602.050
8602.050
8602.050
544
Doors
Glazed door
Base/plinth
Components front and rear
Trim panels, sides
Flex-Block
see page 540
Levelling component for base/plinth
see page 546
Accessories
Mounting plate
1
8614.180
–
–
–
–
639
Cable clamp rails for cable clamps
2
4193.000
4191.000
4192.000
4192.000
4196.000
717
Cable clamp rails (C section) for cable clamps
Section for cable entry, rear
6
–
4944.000
4945.000
4945.000
4947.000
653
1 set
–
8802.065
8802.085
8802.085
8802.1252)
703
Support strips for door
20
–
4596.000
4598.000
4594.000
4596.000
614
180° hinges
4
8800.190
8800.190
8800.190
8800.190
8800.190
613
Door stay for escape routes
1
–
4583.500
4583.500
4583.500
4583.500
617
Page
Earth straps
see page 689
Alternative lock systems
see page 600
1) Without
tubular door frame, mounting plate and gland plates. Protection category IP 55 and NEMA 12 are not met.
2)
Packs of 2 sets
Height: 1800 mm, depth: 600 mm
Width (B) mm
400
600
800
800
1200
Height (H) mm
Packs of
1800
1800
1800
1800
1800
Depth (T) mm
600
600
600
600
600
–
499
699
699
1099
Mounting plate width (F) mm
Mounting plate height (G) mm
1
Model No. TS
Door(s)
Weight (kg)
Support strips fitted in the enclosure depth
–
1696
1696
1696
1696
8486.5101)
8686.500
8886.500
8881.500
8286.500
1
1
1
2
2
51.7
96.8
120.3
125.8
179.9
n
n
n
n
n
Walls
Side panels
2
8186.235
8186.235
8186.235
8186.235
8186.235
Divider panel
1
8609.860
8609.860
8609.860
8609.860
8609.860
567
571
Divider panel for module plates
1
8609.110
8609.110
8609.110
8609.110
8609.110
572
1
–
8610.680
8610.880
–
–
584
Height 100 mm
1 set
8601.400
8601.600
8601.800
8601.800
8601.200
543
Height 200 mm
1 set
8602.400
8602.600
8602.800
8602.800
8602.200
543
Height 100 mm
1 set
8601.060
8601.060
8601.060
8601.060
8601.060
544
Height 200 mm
1 set
8602.060
8602.060
8602.060
8602.060
8602.060
544
Doors
Glazed door
Base/plinth
Components front and rear
Trim panels, sides
Flex-Block
see page 540
Levelling component for base/plinth
see page 546
Accessories
Mounting plate
1
8614.180
–
–
–
–
639
Cable clamp rails for cable clamps
2
4193.000
4191.000
4192.000
4192.000
4196.000
717
Cable clamp rails (C section) for cable clamps
Section for cable entry, rear
6
–
4944.000
4945.000
4945.000
4947.000
653
1 set
–
8802.065
8802.085
8802.085
8802.1252)
703
Support strips for door
20
–
4596.000
4598.000
4594.000
4596.000
614
180° hinges
4
8800.190
8800.190
8800.190
8800.190
8800.190
613
Door stay for escape routes
1
–
4583.500
4583.500
4583.500
4583.500
617
Earth straps
see page 689
Alternative lock systems
see page 600
1) Without
74
tubular door frame, mounting plate and gland plates. Protection category IP 55 and NEMA 12 are not met.
2)
Packs of 2 sets
Rittal Catalogue 33/Enclosures
Baying systems TS 8
Height: 2000 mm, depth: 400 mm
Width (B) mm
600
800
1000
1200
Height (H) mm
Packs of
2000
2000
2000
2000
Depth (T) mm
400
400
400
400
Mounting plate width (F) mm
499
699
899
1099
Mounting plate height (G) mm
1
Model No. TS
1896
1896
1896
1896
8604.500
8804.500
8004.500
8204.500
Door(s)
Weight (kg)
1
1
2
2
99.0
124.0
152.8
184.5
Page
Walls
Side panels
2
8104.235
8104.235
8104.235
8104.235
567
Divider panel
1
8609.040
8609.040
8609.040
8609.040
571
1
8610.600
8610.800
–
–
584
Height 100 mm
1 set
8601.600
8601.800
8601.000
8601.200
543
Height 200 mm
1 set
8602.600
8602.800
8602.000
8602.200
543
Height 100 mm
1 set
8601.040
8601.040
8601.040
8601.040
544
Height 200 mm
1 set
8602.040
8602.040
8602.040
8602.040
544
717
Doors
Glazed door
Base/plinth
Components front and rear
Trim panels, sides
Flex-Block
see page 540
Levelling component for base/plinth
see page 546
Accessories
Cable clamp rails for cable clamps
2
4191.000
4192.000
4336.000
4196.000
Cable clamp rails (C section) for cable clamps
6
4944.000
4945.000
4946.000
4947.000
653
1 set
8802.065
8802.085
8802.1051)
8802.1251)
703
Section for cable entry, rear
Support strips for door
20
4596.000
4598.000
4309.000
4596.000
614
Wiring plan pocket, sheet steel
1
4116.X00
4118.X00
4115.X00
4116.X00
617
180° hinges
4
8800.190
8800.190
8800.190
8800.190
613
4583.500
617
System lights
see page 679
Door stay for escape routes
1
4583.500
4583.500
4583.500
Earth straps
see page 689
Alternative lock systems
see page 600
1) Packs
of 2 sets
Height: 2000 mm, depth: 500 mm
Width (B) mm
400
600
800
1000
1200
Height (H) mm
Packs of
2000
2000
2000
2000
2000
Depth (T) mm
500
500
500
500
500
–
499
699
899
1099
Mounting plate width (F) mm
Mounting plate height (G) mm
1
Model No. TS
Door(s)
Weight (kg)
–
1896
1896
1896
1896
8405.5101)
8605.500
8805.500
8005.500
8205.500
1
1
1
2
2
60.7
101.3
126.3
157.1
190.6
Page
Walls
Side panels
2
8105.235
8105.235
8105.235
8105.235
8105.235
Divider panel
1
8609.050
8609.050
8609.050
8609.050
8609.050
567
571
Divider panel for module plates
1
8609.120
8609.120
8609.120
8609.120
8609.120
572
1
–
8610.600
8610.800
–
–
584
Height 100 mm
1 set
8601.400
8601.600
8601.800
8601.000
8601.200
543
Height 200 mm
1 set
8602.400
8602.600
8602.800
8602.000
8602.200
543
Height 100 mm
1 set
8601.050
8601.050
8601.050
8601.050
8601.050
544
Height 200 mm
1 set
8602.050
8602.050
8602.050
8602.050
8602.050
544
Doors
Glazed door
Base/plinth
Components front and rear
Trim panels, sides
Flex-Block
see page 540
Levelling component for base/plinth
see page 546
Accessories
Mounting plate
1
8614.200
–
–
–
–
639
Cable clamp rails for cable clamps
2
4193.000
4191.000
4192.000
4336.000
4196.000
717
Cable clamp rails (C section) for cable clamps
Section for cable entry, rear
6
–
4944.000
4945.000
4946.000
4947.000
653
1 set
–
8802.065
8802.085
8802.1052)
8802.1252)
703
Support strips for door
20
–
4596.000
4598.000
4309.000
4596.000
614
Wiring plan pocket, sheet steel
1
–
4116.X00
4118.X00
4115.X00
4116.X00
617
180° hinges
4
8800.190
8800.190
8800.190
8800.190
8800.190
613
4583.500
4583.500
617
System lights
Door stay for escape routes
see page 679
1
–
4583.500
4583.500
Earth straps
see page 689
Alternative lock systems
see page 600
1) Without
tubular door frame, mounting plate and gland plates. Protection category IP 55 and NEMA 12 are not met. 2) Packs of 2 sets
Rittal Catalogue 33/Enclosures
75
Baying systems TS 8
Height: 2000 mm, depth: 600 mm
Width (B) mm
400
600
800
1000
1200
Height (H) mm
Packs of
2000
2000
2000
2000
2000
Depth (T) mm
600
600
600
600
600
–
499
699
899
1099
Mounting plate width (F) mm
Mounting plate height (G) mm
1
Model No. TS
Door(s)
Weight (kg)
Support strips fitted in the enclosure depth
–
1896
1896
1896
1896
8406.5101)
8606.500
8806.500
8006.500
8206.500
1
1
1
2
2
55.7
104.0
130.5
161.2
194.6
n
n
n
n
n
Page
Walls
Side panels
2
8106.235
8106.235
8106.235
8106.235
8106.235
Divider panel
1
8609.060
8609.060
8609.060
8609.060
8609.060
567
571
Divider panel for module plates
1
8609.130
8609.130
8609.130
8609.130
8609.130
572
1
–
8610.600
8610.800
–
–
584
Height 100 mm
1 set
8601.400
8601.600
8601.800
8601.000
8601.200
543
Height 200 mm
1 set
8602.400
8602.600
8602.800
8602.000
8602.200
543
Height 100 mm
1 set
8601.060
8601.060
8601.060
8601.060
8601.060
544
Height 200 mm
1 set
8602.060
8602.060
8602.060
8602.060
8602.060
544
Doors
Glazed door
Base/plinth
Components front and rear
Trim panels, sides
Flex-Block
see page 540
Levelling component for base/plinth
see page 546
Accessories
Mounting plate
1
8614.200
–
–
–
–
639
Cable clamp rails for cable clamps
2
4193.000
4191.000
4192.000
4336.000
4196.000
717
Cable clamp rails (C section) for cable clamps
Section for cable entry, rear
6
–
4944.000
4945.000
4946.000
4947.000
653
1 set
–
8802.065
8802.085
8802.1052)
8802.1252)
703
Support strips for door
20
–
4596.000
4598.000
4309.000
4596.000
614
180° hinges
4
8800.190
8800.190
8800.190
8800.190
8800.190
613
Door stay for escape routes
1
–
4583.500
4583.500
4583.500
4583.500
617
Earth straps
see page 689
Alternative lock systems
see page 600
1) Without
tubular door frame, mounting plate and gland plates. Protection category IP 55 and NEMA 12 are not met.
2) Packs of 2 sets
Height: 2000 mm, depth: 800 mm
Width (B) mm
600
800
1200
Height (H) mm
Packs of
2000
2000
2000
Depth (T) mm
800
800
800
Mounting plate width (F) mm
499
699
1099
Mounting plate height (G) mm
1
Model No. TS
Door(s)
Weight (kg)
Support strips fitted in the enclosure depth
1896
1896
1896
8608.500
8808.500
8208.500
1
1
2
111.3
137.0
203.0
n
n
n
Page
Walls
Side panels
2
8108.235
8108.235
8108.235
567
Divider panel
1
8609.080
8609.080
8609.080
571
1
8610.600
8610.800
–
584
Height 100 mm
1 set
8601.600
8601.800
8601.200
543
Height 200 mm
1 set
8602.600
8602.800
8602.200
543
Height 100 mm
1 set
8601.080
8601.080
8601.080
544
Height 200 mm
1 set
8602.080
8602.080
8602.080
544
717
Doors
Glazed door
Base/plinth
Components front and rear
Trim panels, sides
Flex-Block
see page 540
Levelling component for base/plinth
see page 546
Accessories
Cable clamp rails for cable clamps
2
4191.000
4192.000
4196.000
Cable clamp rails (C section) for cable clamps
6
4944.000
4945.000
4947.000
653
1 set
8802.065
8802.085
8802.1251)
703
Section for cable entry, rear
Support strips for door
20
4596.000
4598.000
4596.000
614
180° hinges
4
8800.190
8800.190
8800.190
613
Door stay for escape routes
1
4583.500
4583.500
4583.500
617
Earth straps
see page 689
Alternative lock systems
see page 600
1)
Packs of 2 sets
76
Rittal Catalogue 33/Enclosures
Baying systems TS 8
Height: 2200 mm, depth: 600 mm
Width (B) mm
600
800
1200
Height (H) mm
Packs of
2200
2200
2200
Depth (T) mm
600
600
600
Mounting plate width (F) mm
499
699
1099
Mounting plate height (G) mm
1
Model No. TS
Door(s)
Weight (kg)
Support strips fitted in the enclosure depth
2096
2096
2096
8626.500
8826.500
8226.500
1
1
2
113.1
139.3
208.0
n
n
n
Page
Walls
Side panels
2
8126.235
8126.235
8126.235
567
Divider panel
1
8609.260
8609.260
8609.260
571
1
8610.620
8610.820
–
584
Height 100 mm
1 set
8601.600
8601.800
8601.200
543
Height 200 mm
1 set
8602.600
8602.800
8602.200
543
Height 100 mm
1 set
8601.060
8601.060
8601.060
544
Height 200 mm
1 set
8602.060
8602.060
8602.060
544
717
Doors
Glazed door
Base/plinth
Components front and rear
Trim panels, sides
Flex-Block
see page 540
Levelling component for base/plinth
see page 546
Accessories
Cable clamp rails for cable clamps
2
4191.000
4192.000
4196.000
Cable clamp rails (C section) for cable clamps
6
4944.000
4945.000
4947.000
653
1 set
8802.065
8802.085
8802.1251)
703
Section for cable entry, rear
Support strips for door
20
4596.000
4598.000
4596.000
614
Wiring plan pocket, sheet steel
1
4116.X00
4118.X00
4116.X00
617
180° hinges
4
8800.190
8800.190
8800.190
613
4583.500
617
System lights
Door stay for escape routes
see page 679
1
4583.500
4583.500
Earth straps
see page 689
Alternative lock systems
see page 600
1)
Packs of 2 sets
Rittal France
RITTAL SAS
ZA des Grands Godets z 880 rue Marcel Paul
94507 Champigny sur Marne Cedex
Phone: +33 (0) 1 49 83 60 00
Fax: +33 (0) 1 49 83 82 06
E-mail: info@rittal.fr z www.rittal.fr
Rittal Catalogue 33/Enclosures
77
Baying systems TS 8
System accessories Page 537 482.6 mm (19˝) installation accessories from page 733 Subrack systems Page 211 482.6 mm (19˝) climate control Page 399/400
Material:
Enclosure frame:
Sheet steel 1.5 mm
Front frame: Extruded aluminium sections with die-cast
corner pieces
Rear door: Sheet steel 2 mm
Roof and gland plates:
Sheet steel 1.5 mm
Adaptor sections: Aluminium
Surface finish:
Enclosure frame:
Dipcoat-primed
Roof and rear door:
Dipcoat-primed, powdercoated on the outside,
textured paint
Front frame: Powder-coated
Gland plates: Zinc-plated
Supply includes:
Enclosure frame
Front frame (r/h hinge,
opening angle 130°, held on
the left via mechanical snap
fasteners)
Rear door (r/h hinge, may be
swapped to opposite side)
Roof
Adaptor sections
Gland plates
Colour:
RAL 7035
Approvals:
UL
cUL
Detailed drawings:
Available on the Internet.
Electronic enclosure
33
33
42
42
Width mm
Packs of
600
600
600
600
Height mm
1600
1600
2000
2000
Depth mm
600
800
600
800
8410.510
8418.510
8430.510
8438.510
1
1
1
1
U
1
Model No. TS
Door(s)
Page
Base/plinth
Components front and rear
Trim panels, sides
Height 100 mm
1 set
8601.600
8601.600
8601.600
8601.600
543
Height 200 mm
1 set
8602.600
8602.600
8602.600
8602.600
543
Height 100 mm
1 set
8601.060
8601.080
8601.060
8601.080
544
Height 200 mm
1 set
8602.060
8602.080
8602.060
8602.080
544
Flex-Block
see page 540
Levelling component for base/plinth
see page 546
Accessories
Side panels
2
8166.235
8168.235
8106.235
8108.235
567
Cable clamp rails for cable clamps
2
4191.000
4191.000
4191.000
4191.000
717
Cable clamp rails (C section) for cable clamps
6
4944.000
4944.000
4944.000
4944.000
653
1 set
8802.065
8802.065
8802.065
8802.065
703
Section for cable entry, rear
Adaptor sections for rear
2
8613.360
8613.360
8613.300
8613.300
742
LED system light
1
4140.830
4140.830
4140.830
4140.830
682
Alternative lock systems
78
see page 600
Rittal Catalogue 33/Enclosures
Baying systems TS 8
System accessories Page 537
Application area:
Suitable for the installation of
● Partial mounting plates
● Component shelves and
drawers
● Punched sections and rails
● Partial doors with and without
viewing panels
● Fully glazed doors
● Drawers
● Vertically divided doors
● Trim panels hinged at the top
● Protective bars
Material:
Enclosure frame, roof, rear panel
and gland plates:
Sheet steel 1.5 mm
Surface finish:
Enclosure frame:
Dipcoat-primed
Roof and rear panel: Dipcoatprimed, powder-coated on the
outside, textured paint
Gland plates: Zinc-plated
Supply includes:
Enclosure frame
Roof
Rear panel
Three-piece gland plates
4 eyebolts
Detailed drawings:
(TS basic enclosures without
door)
Available on the Internet.
Colour:
RAL 7035
For modular front design
Width mm
Packs of
Height mm
Depth mm
1
Model No. TS
Weight (kg)
600
800
2000
2000
600
600
8606.512
8806.512
52.5
63.0
Page
Walls
Side panels
2
8106.512
8106.512
591
Divider panel
1
8609.060
8609.060
571
Divider panel for module plates
1
8609.130
8609.130
572
Height 100 mm
1 set
8601.600
8601.800
543
Height 200 mm
1 set
8602.600
8602.800
543
Height 100 mm
1 set
8601.060
8601.060
544
Height 200 mm
1 set
8602.060
8602.060
544
589
Base/plinth
Components front and rear
Trim panels, sides
Flex-Block
see page 540
Trim panel, hinged at the top, height 300 mm
1
8801.230
8801.240
Holder for protective bar
2
8801.000
8801.000
587
Protective bar
1
8801.010
8801.010
587
Partial doors
see page 590
Partial mounting plate
see page 636
System lights
see page 679
Rittal Catalogue 33/Enclosures
79
Baying systems TS 8
System accessories Page 537 Cable entry Page 701
Protection category:
See table.
NEMA 4X:
NEMA 4:
Material:
Enclosure frame, roof, base,
rear panel: Stainless steel
1.4301 (AISI 304), 1.5 mm
Door: Stainless steel 1.4301
(AISI 304), 2.0 mm
Mounting plate: Stainless steel
1.4301 (AISI 304), 3.0 mm
Material:
Enclosure frame, roof, base,
rear panel: Sheet steel,
spray-finished, 1.5 mm
Door: Sheet steel,
spray-finished, 2.0 mm
Mounting plate: Sheet steel,
3.0 mm
Surface finish:
Enclosure frame: Uncoated
Door, roof, base, rear panel:
Exterior brushed,
grain size 400
Mounting plate: Zinc-plated
Surface finish:
Enclosure frame, door, roof,
base, rear panel:
Dipcoat-primed and powdercoated on the outside,
textured paint
Mounting plate: Zinc-plated
F
B
G
T
H
Supply includes:
Enclosure frame with door,
3 mm double-bit lock insert
Roof plate
Gland plate
Rear panel
Mounting plate
4 eyebolts
Colour:
RAL 7035
IP 66/NEMA 4X and IP 66/NEMA 4
Packs of
Stainless steel
Sheet steel
Width (B) mm
800
800
Height (H) mm
2000
2000
Depth (T) mm
600
600
Mounting plate width (F) mm
699
699
Mounting plate height (G) mm
1896
1896
8450.680
8806.580
1
Model No. TS
Door(s)
Protection category
1
1
IP 66 to IEC 60 529,
complies with NEMA 4X.
IP 66 to IEC 60 529,
complies with NEMA 4.
Page
Also required
Side panels IP 66/NEMA 4X, NEMA 4
2
8700.680
8106.580
–
Baying frame IP 66/NEMA 4X, NEMA 4
1
8700.010
8700.010
–
Quick-fit baying clamps, one-piece
6
8800.500
8800.500
577
Baying clamp, horizontal
4
8800.400
8800.400
577
Angular baying brackets
4
8800.430
8800.430
579
Height 100 mm
1 set
8701.800
8601.800
549/543
Height 200 mm
1 set
8702.800
8602.800
549/543
Height 100 mm
1 set
8701.060
8601.060
549/544
Height 200 mm
1 set
8702.060
8602.060
549/544
4
2913.000
–
549
Cable clamp rails
2
4192.000
4192.000
717
Wiring plan pocket, sheet steel
1
4118.000
4118.000
617
Base/plinth
Components front and rear
Trim panels, sides
Base/plinth trim, modular
Accessories
System light
see page 679
Alternative lock systems
see page 600
80
Rittal Catalogue 33/Enclosures
Baying systems TS 8
For areas at risk from earthquakes
TS 8 for earthquake zone 1, 2 and 3 to Bellcore
TS 8806.500:
W x H x D 800 x 2000 x 600 mm
TS 8 for earthquake zone 4 to Bellcore
TS 8806.500:
W x H x D 800 x 2000 x 600 mm
With base/plinth (base/plinth components front
and rear, see page 543 and base/plinth trim, side,
see page 544), 100 mm high with a weight load of
125 kg spread evenly over the mounting plate.
Fitted with:
Earthquake kit and
Earthquake base/plinth, see page 81,
with weight load of 450 kg distributed evenly over
the mounting plate.
Note:
These versions have been tested and meet the
requirements to Telcordia GR 63-CORE. They
should be seen as a comparative variable to the
customer’s own plant, since the certification of
empty enclosures is not possible.
Earthquake kit
(Photo shows TS 8 for earthquake zone 4 to
Bellcore)
2
4
1
For enclosures
WxHxD
mm
Packs of
Model No. TS
Material:
Sheet steel
800 x 2000 x 600
1
8613.860
Surface finish:
Zinc-plated
600 x 2000 x 600
1
8613.6601)
600 x 2000 x 400
1
8613.6401)
Supply includes:
3
1) Extended
3
delivery times.
1 2 side reinforcements, bottom
2 2 bracing struts each, sides
3 8 gusset plates
4 Mounting plate attachment and reinforcement
2
including assembly parts
Earthquake base/plinth
Height 100 mm
Material:
Corner pieces: Sheet steel 5 mm
Trim panels Sheet steel 2 mm
For enclosures
W x D mm
Packs of
800 x 600
1
8601.860
600 x 600
1
8601.6601)
600 x 400
1
8601.6401)
1) Extended
4
Model No. TS
delivery times.
Surface finish:
Powder-coated
Colour:
RAL 7022
Supply includes:
1 set =
4 corner pieces
2 depth stays
1 trim panel each front and rear
fully assembled.
Rittal Catalogue 33/Enclosures
81
Baying systems TS 8
System accessories Page 537 ISV installation modules From page 362 ISV accessories Page 369
Material:
Sheet steel
Contact hazard protection
frame: Hard PVC
Colour:
Enclosure frame, roof, rear
panel, door(s): RAL 7035
Contact hazard protection
frame: RAL 9002
Surface finish:
Enclosure frame:
Dipcoat-primed
Door(s), roof, rear panel:
Dipcoat-primed, powdercoated on the outside,
textured paint
Gland plates: Zinc-plated
Testing:
Design certificate to
IEC 61 439-1/-2
Detailed drawings/
Technical information:
Available on the Internet.
Supply includes:
Enclosure frame with
mounting level, door(s),
3 mm double-bit lock insert
Three-piece gland plates
Rear panel
Roof plate
Contact hazard protection
frame
4 eyebolts
ISV-TS 8 enclosures for distribution enclosures up to 630 A
Width mm
Packs of
Height mm
Depth mm
1
Model No. SV
Door(s)
Approximate weight (kg)
600
850
1100
2000
2000
2000
Page
400
600
400
600
400
600
9665.945
9665.905
9665.955
9665.915
9665.965
9665.925
1
1
1
1
2
2
89.5
94.5
113.5
120
157
167
Base/plinth
Components front and rear
Trim panels, sides
Height 100 mm
1 set
8601.600
8601.600
8601.850
8601.850
8601.300
8601.300
543
Height 200 mm
1 set
8602.600
8602.600
8602.850
8602.850
8602.100
8602.100
543
Height 100 mm
1 set
8601.040
8601.060
8601.040
8601.060
8601.040
8601.060
544
Height 200 mm
1 set
8602.040
8602.060
8602.040
8602.060
8602.040
8602.060
544
Flex-Block
see page 540
Levelling component for base/plinth
see page 546
Accessories
Cable clamp rails
2
4191.000
4191.000
–
–
–
–
717
1
9665.943
9665.903
9665.953
9665.913
9665.963
9665.923
622
Cable entry plates2)
2
8800.060
8800.060
–
–
–
–
701
Side panels
2
8104.235
8106.235
8104.235
8106.235
8104.235
8106.235
567
Roof plates for cable entry glands1)
IP 55
Cable entry glands
see page 623
Alternative lock systems
see page 600
1) To
exchange for the TS standard roof
2) Cable entry grommets, see page 702.
82
Rittal Catalogue 33/Enclosures
Baying systems TS 8
ISV-TS 8 enclosures for distribution enclosures up to 1600 A
Width mm
Packs of
Height mm
Depth mm
1
Model No. SV
Door
Approximate weight (kg)
600
850
2000
2000
600
600
9665.975
9665.985
1
1
94.5
120
Page
Base/plinth
Components front and rear
Trim panels, sides
Height 100 mm
1 set
8601.600
8601.850
543
Height 200 mm
1 set
8602.600
8602.850
543
Height 100 mm
1 set
8601.060
8601.060
544
Height 200 mm
1 set
8602.060
8602.060
544
Also required
Support bracket
24 set
4183.000
4183.000
661
Punched sections without mounting flanges
4
4376.000
4382.000
652
System attachment for mounting the Maxi-PLS
busbar support SV 9649.160 and busbar support
SV 3052.000, see page 340
2
9665.971
9665.971
–
Flex-Block
see page 540
Levelling component for base/plinth
see page 546
Accessories
Cable clamp rails
2
4191.000
–
717
1
9665.903
9665.913
622
Cable entry plates2)
2
8800.060
–
701
Side panels
2
8106.235
8106.235
567
Roof plates for cable entry glands1)
Cable entry glands
see page 623
Alternative lock systems
1) To exchange for the TS
2) Cable entry grommets,
IP 55
see page 600
standard roof
see page 702.
Rittal Germany
RITTAL GmbH & Co. KG
Postfach 1662 z D-35726 Herborn
Phone: +49(0)2772 505-0
Fax: +49(0)2772 505-2319
E-mail: info@rittal.de z www.rittal.com
Rittal Catalogue 33/Enclosures
83