HI-LINE UTILITY SUPPLY CO.
Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
132
TRAVELING GROUND
ROLLING GROUND
This equipment was
designed to protect
linemen against fatal
injuries or severe burns
during all stringing
operations. It’s design
provides a continuous
ground and guards
against accidental
energizing of moving
conductors.
Cat. No.
Conductor Range
Cat. No. MTR-001
Weight of 23 lbs., roller
diameter is 5", roller width
is 3".
TEMPORARY
GROUND ROD
Weight
JT3TA
.0625" - 1"
3.5 lbs.
JT77TA
.250" - 1.625"
4.75 lbs.
TEMPORARY TRUCK GROUND
Grounding
GROUNDING
Cat. No. HL958-TG
The temporary truck grounding tool allows for
easy safe driving of a temporary ground rod and
also easy removal. The exposed end of this tool is
internally threaded, so that a standard 5/8" sectional
rod can be threaded into the shaft. The ground
rod then can be driven to the desired depth and a
suitable clamp attached to the rod. Ground Rod
Driver Only - Cable not included.
GROUND ROD DRIVER
Cat. No. GP
This manual Ground Rod Driver
will drive up to 5/8" rods fast and
safely. An eight foot rod can be
driven below ground level with ease.
The side handles combined with our
INTERNAL HAMMER keep hands
and fingers away from any impact
areas.
5/8" DRIVE HEAD
Cat. No. CTDH58 Threaded
Cat. No. CDH58 Non-Threaded
Cat. No. G3370
This reusable, copper clad Screw
Ground Rod provides a temporary
ground where a system ground is
not available. When installed, the 6'
spiraled ground rod develops less
resistance than straight ground rods.
However, actual effectiveness
depends upon soil properties.
Convenient for truck grounding
applications.
THREADED GROUND ROD
Cat. No. C635860 5/8" x 6' Copper
5/8" THREADED
GROUND ROD
COUPLER
Cat. No. CTC58
DRIVE POINTS FOR
GROUND ROD
Cat. No. DP58C
Attach this hardened, sharp
point to your rod tips and make
driving easier while reducing
drag along rod length.
HI-LINE UTILITY SUPPLY CO.
Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
GROUNDING
133
Custom Grounds & Jumpers Assembly and Testing
Hi-Line’s NAIL accredited facility builds and tests custom grounds and
jumpers to the exact specifications of customers. We can ship an assembly the same day
the order is placed. Hi-Line’s assembly, quality, and quick delivery comes from years of experience and
Hi-Line’s fully stocked warehouse containing all the necessary componenets
and tools. Hi-Line’s highly trained staff has assembled over a half million
grounds and jumpers sets in the last 40 years.
Hi-Line offers repair, cleaning, testing, and certification programs
to meet individual customer requirements. When was the last time you
had your grounds or jumpers tested?
Best Practices for Testing: Grounds & Jumpers
Bes
1 Year
If Damage
Suspected
Grounds
Optional
Recommended
Required
Jumpers
Optional
Recommended
Required
Grounds Testing
Cat. No. HLRTP1 - Grounds Proof Test
Cat. No. HLRT-(length) - Retest & Clean
GROUNDING EQUIPMENT HOW TO ORDER GROUND SETS
CHOOSE COMPLETE ASSEMBLIES (Page 134-135)
OR
CREATE A CUSTOM SET BY SELECTING INDIVIDUAL
COMPONENTS BELOW
1. Clamps: (Pg. 137-139)
Clamping Size Range, Current Capacity, Application Clearance,
and Terminal Connection Type (threaded or pressure type)
2. Cable: (Pg. 136)
Length, Jacket Type, and Adequate Capacity to Withstand
Maximum Potential System Fault Current Magnitude and Full
Time Duration
3. Ferrules: (Pg. 136)
Aluminum or Copper, Fit Cable Size, and Connection Type to
Match Clamp (threaded or pressure type)
Note: Either aluminum or copper ferrules may be used with copper cable.
NOTE: DO NOT USE WELDING
CABLE ON GROUND SETS Responsibility for selection of the
proper product or application rests
solely with the purchaser
4. Support Stud: (Pg. 136) (replaces strap on strain relief clamp)
This option recommended on only one clamp to help control
lifting the set to the first clamp attachment point.
5. Shrink Tubing: (Pg. 137)
This option recommended for stress relief and inspection of
cable strands between ferrule and jacket.
Grounding
After Every
Job
HI-LINE UTILITY SUPPLY CO.
Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
134
GROUNDING
UNDERGROUND DISTRIBUTION GROUNDING SETS
GROUNDING ELBOW SETS
For Single-Phase or Three-Phase
Switches & Transformers
Each assembled set includes an orange-jacketed elbow for the
voltage-class indicated below, 6 feet of 1/0 yellow jacket copper
grounding cable, ferrules and T600-0466 bronze ground clamp.
Fault current rating for
Cat. No.
Application
Wgt.
each set: 10,000 amps for
C600-0729
15kV
4 lbs.
10 cycles.
T600-2131*
25kV/35kV
6 lbs.
C600-1927**
35kV
8 lbs.
*For 25kV or small 35kV Elastimold interface
**Cooper(RTE) large interface
THREE-PHASE GROUNDING ELBOW SETS
FOR SWITCHES & TRANSFORMERS
Grounding
Each of these sets consists of a three-way terminal block
assembly, three 6 foot lengths of 1/0 yellow jacket copper ground
cable, ferrules, one T600-0466 bronze ground clamp and three
orange elbows.
Fault current rating for each set: 10,000 amps for 10 cycles
Cat. No.
C600-3102
C600-3103*
Application
15kV
25kV/35kV
Wgt.
14.5 lbs.
15 lbs.
*For small 25kV or smaller 35kV Elastimold interface
Note: Large 35kV Cooper elbow ground sets available on request
GROUNDED PARKING BUSHING SET
For Single-Phase or Three-Phase
Switches & Transformers
This set includes a loadbreak bushing and T600-0466 bronze
ground clamp connected by a 4 foot, 1/0 yellow jacket copper
ground cable and ferrules.
Cat. No. Description
T600-3091
1 leg - 15kV
T600-3091C 3 leg - 15kV
T600-3092 1 leg - 25kV
T600-3093C 3 leg - 35kV
Wgt.
8 lbs.
20 lbs.
9 lbs.
25 lbs.
T600-3091
HI-LINE UTILITY SUPPLY CO.
Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
GROUNDING
135
GROUNDING SETS - COMPLETE ASSEMBLIES
These pre-assembled GROUND sets are offered in a range of sizes
and lengths. Yellow or clear flexible grounding cable is used. Shrouded,
threaded copper ferrules with shrink tubing are used on all sets offering
excellent connection and strain relief properties.
COMPLETE GROUNDING SET ASSEMBLIES
W/ T600-0658 CLAMP - GRIP RANGE OF .162” - 2”
Cable Length
1/0 Yellow
1/0 Clear
2/0 Yellow
2/0 Clear
4/0 Yellow
4/0 Clear
HLGA10Y-03 HLGA10C-03 HLGA20Y-03 HLGA20C-03 HLGA40Y-03 HLGA40C-03
6’
HLGA10Y-06 HLGA10C-06 HLGA20Y-06 HLGA20C-06 HLGA40Y-06 HLGA40C-06
8’
HLGA10Y-08 HLGA10C-08 HLGA20Y-08 HLGA20C-08 HLGA40Y-08 HLGA40C-08
10’
HLGA10Y-10 HLGA10C-10 HLGA20Y-10 HLGA20C-10 HLGA40Y-10 HLGA40C-10
15’
HLGA10Y-15 HLGA10C-15 HLGA20Y-15 HLGA20C-15 HLGA40Y-15 HLGA40C-15
30’
HLGA10Y-30 HLGA10C-30 HLGA20Y-30 HLGA20C-30 HLGA40Y-30 HLGA40C-30
45’
HLGA10Y-45 HLGA10C-45 HLGA20Y-45 HLGA20C-45 HLGA40Y-45 HLGA40C-45
50’
HLGA10Y-50 HLGA10C-50 HLGA20Y-50 HLGA20C-50 HLGA40Y-50 HLGA40C-50
75’
HLGA10Y-75 HLGA10C-75 HLGA20Y-75 HLGA20C-75 HLGA40Y-75 HLGA40C-75
OTHER
CONFIGURATIONS
ALSO AVAILABLE
COMPLETE 3-LEG GROUNDING SET ASSEMBLIES
W/ T600-0466 C-CLAMP - GRIP RANGE OF .162” - .814”
Cable Length
1/0 Yellow
1/0 Clear
3’
6’
8’
10’
12’
HLGC10Y-03
HLGC10Y-06
HLGC10Y-08
HLGC10Y-10
HLGC10Y-12
HLGC10C-03
HLGC10C-06
HLGC10C-08
HLGC10C-10
HLGC10C-12
3-LEG SETS FOR USE IN VAULTS, ESS, LOW PROFILE SWITCH GEAR,
SECTIONALIZERS, WALL MOUNTED METAL SWITCHES, FUSE CABINETS
INSULATED HANGER
Cat. No. S1600-7
The Insulated hanger
serves as a convenient
parking stand while
linemen are installing
Jumper or Grounding
Clamps on lines up to
34.5kV. The bronze
double stud fitting is
1/2” x 3 1/2” on each
side.
GROUND SET
BAGS
Cat. No. HL5993
28" H x 24" W
CLUSTER BAR
Cat. No. T600-1549
Compact 5"
aluminum-alloy bar
(5/8" dia) accepts
C-type or duckbill
clamps for phaseto-phase grounding
technique. Adjustable
wheel binder and 36"
chain for wood pole attachment.
Order T600-1737 hook style bar for
attachment to steel tower.
Grounding
3’
GROUNDING
HI-LINE UTILITY SUPPLY CO.
Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
136
COPPER GROUNDING CABLE
CLEAR YELLOW
Cat. No. Cat. No.
S6449
Flexible Jacket Copper Cable
AWG Prox. O.D.
HLGC02-Y
2
.53"
Prox. Wgt.
300 lb/cft
This copper grounding cable has a transparent
S7568 HLGC10-Y 1/0
.64"
475 lb/cft
thermoplastic jacket allowing for constant, full length
S6450 HLGC20-Y 2/0
.70"
565 lb/cft
inspection of cable strands unlike solid jackets which
S6451 HLGC40-Y 4/0
.84"
856 lb/cft
can conceal strand damage and oxidation. This Jacket
Black
Jacket
Cable
Also
Available
is smooth, abrasion, and weather & oil resistant and
remains flexible from -29°C to 90°C. This material
passes a -40°C cold bin and meets Type II requirements of ASTM F 855. AWG size is marked on jacket.
Black and Yellow jackets are T-prene rubber compound and can be used to -20oF.
Grounding
SHROUDED FERRULES
UNSHROUDED FERRULES
Threaded Type
Shrouded Ferrules
Plain Pressure Type
Shrouded Ferrules
Cable
AWG
Alum
Cat. No.
Alum
Cat. No.
#2
C600-2618
C600-2622 C600-2626 C600-2630
1/0
C600-2619
2/0
4/0
Copper
Cat. No.
Copper
Cat. No.
Threaded Type
Unshrouded Ferrules
Cable
AWG
Alum
Cat. No.
C600-2623 C600-2627 C600-2631
#2
C600-2602
C600-2606 C600-2610 C600-2614
C600-2620
C600-2624 C600-2628 C600-2632
1/0
C600-2603
C600-2607 C600-2611 C600-2615
C600-2621
C600-2625 C600-2629 C600-2633
2/0
C600-2604
C600-2608 C600-2612 C600-2616
4/0
C600-2605
C600-2609 C600-2613 C600-2617
Use either Aluminum or Copper ferrules with copper cable
To Crimp Shrouded Ferrules Above,
Use Die Number U165 & U166 on #2 Cppr & Alum Ferrules
Use Die Number U165 & U168 on 1/0 Cppr & Alum Ferrules
Use Die Number U165 & U-L on 2/0 Cppr & Alum Ferrules
Use Die Number U166 & U-L on 4/0 Cppr Ferrules
Use Die Number U249 & U-L on 4/0 Alum Ferrules
SUPPORT STUDS
These support
studs can be
installed in place
of the restraining
strap immediately
below the pressure
terminal. The stud
serves as a parking
stand for a second
clamp.
Cat. No.
G3627
Copper
Cat. No.
Plain Pressure Type
Unshrouded Ferrules
Alum
Cat. No.
Copper
Cat. No.
Use either Aluminum or Copper ferrules with copper cable
To Crimp Unshrouded Ferrules Above,
Use Die Number U165 on Cppr & Alum Ferrules up to 2/0
Use Die Number U166 on 4/0 Copper Ferrules
Use Die Number U249 on 4/0 Aluminum Ferrules
4-WAY GROUND CONNECTORS
Cat. No.
G3626
Cat. No. G4754-1
Cat. No. 2374
Three-way and
Threaded Connectors Also Available
GROUNDING
137
HI-LINE UTILITY SUPPLY CO.
Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
C-TYPE GROUNDING CLAMPS
C600-1732
.26 - 2.88”
Aluminum Body
All Angle Ground
Clamp
C600-2100
w/Drilled Terminal
C600-2300
w/Pressure
Terminal
C600-2255
C600-2281
Cat. No.
Electrical Ratings
Continuous Current (AMPS)
Fault Current - 15 Cycles
(AMPS)
Fault Current-30 Cycles
(AMPS)
Mechanical Ratings
Recommended Torque (in -lb.)
Main Line Range - Max
Main Line Range - Min
Jumper Range - Max
Jumper Range - Min
Weight, Each
ASTM Designation
.16 - .2.0”
Aluminum Body
Smooth Jaws
Drilled Terminal for
Threaded Ferrule
C600-2256
T600-0658
.162 - 2”
Aluminum Body
Smooth Jaws
Drilled Terminal
for Threaded
Ferrule
Same as above but
w/Serrated Jaws
C600-1732
C600-2100
C600-2101
C600-2300
C600-2281
C600-2282
C600-2255
T600-0658
400
400
400
400
400
400
43,000
43,000
43,000
43,000
43,000
43,000
30,000
30,000
30,000
30,000
30,000
30,000
250
2.88”
250
1” dia. Ball
Stud
1” dia. Ball
Stud
4/O Grd.
Cable
#2 Grd. Cable
250
2” O.D. Bus
250
2” O.D. Bus
400
2” O.D. Bus
#2 Sol. Cu
(.258)
4/O Grd.
Cable
#2 Grd. Cable
250
1” dia. Ball
Stud
1” dia. Ball
Stud
4/O Grd.
Cable
#2 Grd. Cable
#6 Sol. Cu
(.162)
4/O Grd.
Cable
#2 Grd.
Cable
#6 Sol. Cu
(.162)
4/O Grd.
Cable
#2 Grd.
Cable
#6 Sol. Cu
(.162)
4/O Grd.
Cable
#2 Grd.
Cable
3.25 lb.
Type 1
Class B
Grade 5
1 lb.
Type 1
Class A
Grade 5
1 lb.
Type 1
Class A
Grade 5
2 lb.
Type 1
Class A
Grade 5
2 lb.
Type 1
Class A
Grade 5
2.4 lb.
Type 1
Class A
Grade 5
SHRINK TUBING
Cat. No. P600-1593 5" Long Piece
Cat. No. P600-1594 8" Long Piece
Clear heat shrink tubes provide stress relief, corrosion protection, and visual inspection.
Grounding
.16 - 2.0”
Aluminum Body
C600-2101
Smooth Jaws
w/Tapped Terminal Bronze body
Pressure Type
socket style will
Terminal
Bronze body
accept 1” diamsocket style will
eter ball studs
C600-2282
accept 1” diameter
Same as above but
ball studs
w/Serrated Jaws
GROUNDING
HI-LINE UTILITY SUPPLY CO.
Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
138
C-TYPE GROUNDING CLAMPS
T600-0466
Grounding
.162 - .814
Bronze Body
Smooth Jaws
Drilled Terminal for
Threaded Ferrule
C600-1754
C600-1743
G3605-1
G3367-2
12282
.128 - .998
Aluminum Body
Smooth Jaws
Threaded Terminal
.162 - 1.5
Aluminum Body
Smooth Jaws
Threaded Terminal
.162 - 2
Aluminum Body
Smooth Jaws
Pressure Type
Terminal
.232 - 2.5
Aluminum Body
Smooth Jaws
Pressure Type
Terminal
.398 - 6.625
Aluminum Body
Serrated Jaws
Pressure Type
Terminal
Cat. No.
Electrical Ratings
Continuous Current (AMPS)
Fault Current - 15 Cycles
(AMPS)
Fault Current-30 Cycles
(AMPS)
Mechanical Ratings
Recommended Torque (in -lb.)
Main Line Range - Max
Main Line Range - Min
Jumper Range - Max
Jumper Range - Min
Weight, Each
ASTM Designation
T600-0466
C600-1754
C600-1743
G3605-1
G3367-2
12282
200
350
400
400
400
400
21,500
28,000
43,000
43,000
43,000
54,000
15,000
20,000
30,000
30,000
30,000
39,000
200
477 kcmil
ACSR
(.814)
250
750 kcmil
Str. Cu.
636 kcmil
ACSR
(.998)
#8 Sol. Cu.
(.128)
2/O Grd.
Cable
w/Thread
Ferrule
#2 Grd.
Cable
w/Thread
Ferrule
1 lb.
Type I
Class A
Grade 3
250
1000 kcmil
Cu.
1590 kcmil
ACSR (1.50)
250
2” O.D. Bus
250
2.5” O.D.
Bus
250
6.625” O.D.
Bus
#6 Sol. Cu.
(.162)
4/O Grd.
Cable
w/Thread
Ferrule
#2 Grd.
Cable
w/Thread
Ferrule
1.5 lb.
Type I
Class A
Grade 3
#6 Sol. Cu.
(.162)
4/O Grd.
Cable w/Plain
Ferrule
#4 Str. Cu.
1/O Str.
(.398)
4/O Grd.
Cable
#6 Sol. Cu.
(.162)
1/O Grd.
Cable
w/Thread
Ferrule
#2 Grd.
Cable
2/Thread
Ferrule
1.5 lb.
Type I
Class A
Grade 2
#2 Grd. Cable
w/Plain
Ferrule
1.75 lb.
Type I
Class A
Grade 5
4/O Grd.
Cable
w/Plain
Ferrule
#2 Grd.
Cable
w/Plain
Ferrule
1.75 lb.
Type I
Class A
Grade 5
Always use a wire brush on bare conductor to
remove oxides and contaminants before attaching
grounds, jumpers, taps, splices or connectors.
Page 142
1/O Grd.
Cable
5.5 lb.
Type 1
Class A
Grade 6
GROUNDING
139
HI-LINE UTILITY SUPPLY CO.
Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
SNAP ON CLAMPS
G1810-2
G3622-1
C600-1734
C600-0434
C600-2231
C600-2232
.162 - .574
Aluminum Body
Smooth Jaws
Pressure Type
Terminal
.162 - 1.162
Aluminum Body
Smooth Jaws
Pressure Type
Terminal
.162 - 1.162
Aluminum Body
Smooth Jaws
Threaded Terminal
.162 - 1.506
Aluminum Body
Serrated Jaws
Pressure Type
Terminal
1/8"- 1-1/2"
Bronze Body
Serrated Jaws
Drilled Terminal
No Threads
1/8"- 1-1/2"
Bronze Body
Serrated Jaws
Drilled Terminal
No Threads
G1810-2
G3622-1
C600-1734
Electrical Ratings
Continuous current (AMPS)
Fault Current-15 Cycles (AMPS)
Fault Current-30 Cycles (AMPS)
Mechanical Ratings
300
28,000
20,000
400
36,000
25,000
400
36,000
25,000
400
43,000
30,000
400
43,000
30,000
400
43,000
30,000
200
250
250
250
250
250
250 kcmil Str
Cu.
4/0 ACSR
(.574)
566 kcmil
Cu.
900 kcmil ACSR
(1.162)
566 kcmil
Cu.
900 kcmil
ACSR (1.162)
950 kcmil
Cu.
1510 kcmil
ACSR (1.506)
1-1/2" Angles
1-1/2" Flat
1-1/2" Flat
#6 Sol. Cu.
(.162)
#6 Sol. Cu.
(.162)
#6 Sol. Cu.
(.162)
#6 Sol. Cu.
(.162)
1/8"
1/8"
Recommended Torque (in.-lb.)
Main Line Range - Max
Main Line Range - Min.
C600-0434
C600-2231
C600-2232
1-1/2" Angles
Jumper Range - Max
2/0 Grd. Cable 4/0 Grd. Cable 4/0 Grd. Cable 4/0 Grd. Cable 4/0 Grd. Cable
4/0 Grd. Cable
w/ Plain Ferrule w/ Plain Ferrule w/ Thread Ferrule w/ Plain Ferrule w/ Thread Ferrule w/ Thread Ferrule
Jumper Range - Min
#2 Grd. Cable
#2 Grd. Cable
#2 Grd. Cable
#2 Grd. Cable
#2 Grd. Cable
#2 Grd. Cable
w/ Plain Ferrule w/ Plain Ferrulew/ Thread Ferrule w/ Plain Ferrule w/ Thread Ferrule w/ Thread Ferrule
Weight, Each
ASTM Designation
1.5 lb.
1.5 lb.
1.5 lb.
1.5 lb.
2 lb.
2 lb.
Type I
Class A
Grade 3
Type I
Class A
Grade 4
Type I
Class A
Grade 4
Type I
Class B
Grade 5
Type I
Class B
Grade 5
Type I
Class B
Grade 5
WARNING MARKER
Cat. No. 1632-GR-3V
Warning marker for temporary
grounds with reflective striping for
night time visibility. The marker is
secured onto the ground with Hook
& Loop.
Ground Set
Tester
Pg. 131
Grounding
Catalog Number
140
HI-LINE UTILITY SUPPLY CO.
Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
PORTABLE PROTECTIVE
GROUND MAT
EQUI-MAT
These vinyl-polyester ground mats come in a standard
mat and anti-skid mat. It has high ampacity, tinned-copper
braid sewn into a grid pattern which connects to a six inch
termination stud on the corner of the mat. Foldable, rollable,
reversible, and easy to clean. Anti-skid is best choice for
snow or rain conditions.
Equi-Mat provides an
easy way to help establish
an equipotential zone for
a line worker to stand on
during various energized
and de-energized work
practices. It is portable and
simple to use, maintain and
store. Multiple mats can be
connected to form larger
work grids.
Grounding
Standard Mat
GROUNDING
The Personal Protective Ground Grid...
Anti-Skid Mat
Standard Mat
Cat. No. Size
6610
58” x 58”
6615
58” x 120”
6620
120” x 120”
Color/Material
Yellow/Vinyl Polyester
Yellow/Vinyl Polyester
Yellow/vinyl Polyester
Anti-Skid Mat
Cat. No. Size
6610-NS 58” x 58”
6615-NS 58” x 120”
6620-NS 120” x 120”
Color/Material
Black/Hypalon-Marine Fabric
Black/Hypalon-Marine Fabric
Black/Hypalon-Marine Fabric
Weight
5 lb.
10 lb.
20 lb.
Wgt
5 lb.
10 lb.
20 lb.
BUCKET EQUI-MAT
Cat. No. HLGM-22-22
This 22" x 22"model applies the same properties as
the Equi-Mat but sized for use in a utility bucket. An 8'
ground cable is supplied for attachment to the boom and
a 100' ground cable is supplied for attachment to ground.
Other sizes and configurations are available upon request.
Minimum order quantities may apply.
Properly applied,
the Equi-Mat
accomplishes
compliance with
OSHA 1910.269.
"Equipotential Zone"
Temporary protective grounds SHALL be placed
at such locations and arranged in such a manner
as to prevent each employee from being exposed to
hazardous differences in electrical potential.
Cat. No.
Description
C600-2989 58" x 58" Equi-Mat Set
C600-2990 58" x 120" Equi-Mat Set
C600-2991 120" x 120" Equi-Mat Set
SETS INCLUDE GROUND GRID, LONG BALL STUD, 6'
GROUND SET AND STORAGE BAG.
HI-LINE UTILITY SUPPLY CO.
Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
GROUNDING
141
GROUNDED INSULATED RATCHET CUTTER
Cat. No. HL8HC-6L
This unique, 8'
fiberglass handled cutter comes with an
attached, 6'- 1/0 ground cable and clamp
eliminating the need for a spiking
operation.
Cutting Capacity:
1000 MCM Aluminum
500 MCM Copper
ELECTRO-STATIC PRECIPITATOR
GROUNDING TOOL SET
Cat. No. 1715EPP
This hydraulic
ground spike is used
for grounding and
draining a cable
after it has been
de-energized and
before contact is
made. Each
assembly has a 30’ insulated hydraulic hose and a
hand-operated hydraulic pump. The ground lead is a
1/0 x 6’ copper cable with a clamp end for connection to a local system ground. 1,200 psi; Wgt: 28 lbs.
Cat. No. 1715-66
Similar and larger than the model above except
this unit utilizes a blade in place of a spike which
will make contact with all three conductors of the
sector cable.
10,000 psi; Wgt: 85 lbs.
Cat. No. 1712GA
This is a manual version of the 1715 model
shown above. Use with
shot gun.
Cat. No. 1712U
Same as above
but with universal
attachment
1712GA
TRUCK GROUNDING COMPONENTS
For truck grounding system and restricted space applications,
this compact clamp design delivers a high current rating
usually associated with only large clamps. Ball Studs
permanently mount on truck body w/ 1/2-13 x 2” thread, nut
& washer. Two clamp styles and two ball stud lengths adapt to many applications. Ball Stud Cover protects
stud when not in use. ASTM Designation: Type I, Class A, Grade 5.
C600-2102 Ball Stud
C600-2300 w/Pressure
Terminal
C600-2100 w/Drilled
Terminal
C600-2101 w/Tapped
Terminal
C406-0416 Rubber Stud Cover
T600-2364 Long Ball Stud 3" Shank
Grounding
Cat. No. T600-0891
By design, this
tool set provides a
reliable means of
draining off static
charges that remain
on collector plates
after electrostaticprecipitator
pollution-control equipment is de-energized for
servicing.
Epoxiglas(r) handle (42"x1-1/2") meets OSHA
electrical requirements, gives operator sufficient
added reach needed to make contacts. Contact
hook of 98%-conductive Copper is double-bolted
to handle. T-handle Aluminum grounding clamp
with serrated flat-face jaw assures proper bonding.
Jaws open to 1-1/2" for attachment to grounded
structural angles, flats or rods. Extra-flexible Copper
grounding cable, 7 ft., with clear jacket fitted with
Copper terminal at each end gives high currentcarrying capability.
Weight 7 lb./3.2 kg.
SPIKING TOOL
142
HI-LINE UTILITY SUPPLY CO.
Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com
GROUNDING
GROUNDING REEL
Cat. No. GRS-17
Heavy duty steel grounding reel with easy cable pay-out and spring
rewind. Cable capacity is 75’ of #2, 75’ of 1/O, and 65’ of 2/O.
Although reel is rated to 43kA for 30 cycles, the size and spring pull
force of the reel limits use to 2/O cable and smaller. Maximum fault
rating of 2/O cable is 27kA.
Order cable separately.
To custom order ground cable see components on Page 133.
STORAGE REEL
Cat. No. SR17
Holds 85’ of 2/0
ground cable.
Grounding
CONDUCTOR CLEANING BRUSHES
Cat. No. M4455-93
5” x 1-1/4” dia. tubular
brush has stainless steel
bristles enclosed reducing
the chance of damaging
rubber gloves.
Cat. No. 4337
This 3” x 1-1/4” dia.
tubular brush is used in
confined areas such as
between two previously
installed connectors or
clamps.
Cat. No. M4455-92
Tube type hot stick
brush with universal
adapter.
Cat. No. M1889
“V” position
of brushes gives
two-sided cleaning
action. As brushes
wear, they can be
rotated so that unused bristles will come in contact
with conductor.
Cat. No. 10-178
“V” brush with hole in handle
for use with shotgun.
Cat. No. M4455-63
V-brush gives
2-sided cleaning
action. Brushes
can be rotated
as they wear.
Universal adapter
for use with a hot stick.
Cat. No. M1899 Box of 10 repl. brushes.
CONDUCTOR CLEANER
SAND SCREEN
Cat. No. HLCS-17
This flexing conductor cleaner utilizes
a poly, “bow” frame to hold its 1-1/2”
x 24” strip of emery cloth.
Cat. No. NO180
9” x 11,” 180 grit washable
and reusable sheets for cleaning
conductor. 25 sheets per pack