DIRECTORY
2012
CZECH AND MORAVIAN ELECTRICAL
AND ELECTRONIC ASSOCIATION
ČESKOMORAVSKÁ ELEKTROTECHNICKÁ ASOCIACE
www.electroindustry.cz
54th International
Engineering
Fair
8th International
Machine
Tools Exhibition
www.bvv.cz/msv
www.bvv.cz/imt
MSV 2012
12
MSV 2012
September 10–14, 2012
Brno – Czech Republic
Co-organiser
BVV Trade Fairs Brno
Výstaviště 1
CZ – 647 00 Brno
phone: +420 541 152 926
fax: +420 541 153 044
e-mail: msv@bvv.cz
imt@bvv.cz
www.bvv.cz/msv
www.bvv.cz/imt
Czech and Moravian Electrical and Electronic Association
e-mail: ela@electroindustry.cz, www.electroindustry.cz
BOARD OF DIRECTORS
Ing. Stanislav Adamec, President of the Association
– CEO FVE BS s.r.o.
Ing. Eduard Palíšek, PHD, MBA, 1. Vice-president of the Association
– CEO Siemens s.r.o.
Ing. Pavel Prior, Vice-president of the Association
– CEO PROSPEKSA, a.s.
Valentin Girstl - CEO, VUVL, a.s.
Ing. František Hála – Member of the Board, TESLA Holding a.s.
Ing. Jiří Holoubek – Chairman of the Board, ELCOM, a.s.
Ing. František Hrda – Chairman of the Board, Minerva Boskovice, a.s.
Ing. František Hýbner – Director of the Association
Ing. Pavel Kafka, Dr.h.c – Honorary Member of the Board,
president of the Czech Management Association
Ing. Jiří Kuliš, CSc. – Vice-chairman of the Board, Veletrhy Brno, a.s.
Ing. Vladimír Kysela – Vice-president, ABB s.r.o.
Ing. Jan Mengler, CSc. – Vice-chairman of the Board, SAFINA, a.s.
Ing. Michal Mika, MBA – Director, GAMA IMAGING s.r.o.
Ing. Zdeněk Stuchlík – Chairman of the Board, ZPA Smart Energy a.s
SUPERVISORY BOARD
Ing. Jiří Kohout – CEO, Schmitt & Schmitt s.r.o.
Pavel Koutnik – Chairman of the Board, Elektroprim - Koutník, a.s.
Ing. Dagmar Negrová – Independent consultant
SECRETARIAT ADDRESS
Českomoravská elektrotechnická asociace
Polygon House, Doudlebská 5, 140 00 Praha 4, Czech Republic
Ing. František Hýbner, Director of the Association
Ing. Jan Prokš, Ph.D., Deputy Director of the Association
Phone: +420 261 213 623, Fax: +420 261 213 624
E-mail: ela@electroindustry.cz, web: www.electroindustry.cz
Directory of important institutions
RETELA, s.r.o.
RETELA - WEEE Collective Take-Back Scheme
Ing. Jaroslav Vladík, CSc. – Director
Neklanova 152/44, 128 00 Praha 2, Vyšehrad, Czech Republic
Phone: +420 224 910 402, e-mail: vladik@retela.cz, web: www.retela.cz
CONFEDERATION OF INDUSTRY
OF THE CZECH REPUBLIC
Ing. Zdeněk Liška – Secretary General
Freyova 948/11, 190 05 Praha 9, Czech Republic
Phone: +420 225 279 111, e-mail: zliska@spcr, web: www.spcr
ELECTROTECHNICAL
TESTING INSTITUTE
RNDr. Vladimír Filiač, CSc. – Managing Director
Pod Lisem 129, 171 02 Praha 8, Troja, Czech republic
Phone: +420 266 104 111, email: info@ezu.cz, web: www.ezu.cz
CZECH ACCREDITATION
INSTITUTE
Ing. Jiří Růžička, MBA – Director of CAI
Olšanská 3, 130 00 Praha 3, Czech Republic
Phone: + 420 272 096 222, e-mail: mail@cai.cz, web: www.cai.cz
www.electroindustry.cz
3
THE ELECTRICAL AND ELECTRONIC
INDUSTRY IN THE CZECH REPUBLIC
Ing. Stanislav Adamec
President of the Association
Czech Republic. Although the electric and electronic industry was adversely
affected by the economic crisis and decreased in volume, it still provides
employment for ca. 170 thousand people. The crisis, however, not only
has its negative impacts on employment numbers, it also contributed to
further production restructuring, to increased specialization and orientation
on new innovated products with higher added value. Stronger position can
be found especially with traditional areas as heavy-current, automation,
measuring and control technologies, and such production segments that
require a high level of innovation with longer utilization periods.
Heavy-Current Electrical Technology
The electrical and electronic industry in the Czech Republic is a traditional,
constantly developing area with a rich history. This history burned into many
changes that were defined not only by technological development, but also
by political and economic events. Recent history of the Czech electrical and
electronic industry has seen many changes, and during the last years, an
increase of productivity of work and also of product quality could be noted.
The innovation level of Czech products makes it possible to find still new
challenging markets. In the globalized environment of world trade, our
products are competitive and the trade exchange is growing in parallel to
the ever-increasing size of production.
The electrical industry is marked by:
•
the complementary character of its production in creating
prerequisites for the competitiveness of other branches of the
manufacturing industry and power industry,
•
a high proportion of imported materials, components and parts for
production and assembly,
•
a wide range of technological processes,
•
a high proportion of supranational capital in new investment
projects and the use of progressive technologies,
•
the use of logistic networks of supranational companies,
•
a high proportion of science and research used in the production
of computer and digital communications technology and the need
for highly-qualified employees in research, development and
production.
The share of the electrical industry on the revenue from sales of own
products and services of the manufacturing industry in the Czech Republic
as a whole reaches ca. 14.5 %. Thanks to this share ratio, to the creation of
added value as well as of employment, the electrical industry is virtually
placed 2nd to 3rd among the most important industrial sub-sectors in the
4
Electrical machines and equipment have a stable position in the
structure of the Czech electrical industry. Its main products are electric
motors, generators and transformers, electricity distribution and switching
equipment, cables and insulated conductors. In the recent several years,
especially on the basis of foreign investments, the range of electrical
industry products has been extended to include electrical equipment
for the automotive industry. The technical level of products and services
attains global standards. These products are mostly sold to countries
within the European Union. Enterprises engaged in heavy-current electrical
engineering employ 58 % of the people working in the electrical industry in
the Czech Republic. The trade balance related to this commodity has been
traditionally favourable. Foreign owners of large production organisations
have carried out the needed modernisation of technologies, improved the
organisation of production, and - most importantly - arranged new business
connections.
Heavy-current electrical engineering accounted for approximately 60 % of
production in the Czech electrical industry in the past, but resulting from the
influence of greater production increase in other branches of electronics, its
share fell, however, from the point of view of its production volume and its
added value, the heavy-current electrical engineering still belongs among
structure-creating fields of industry.
The Association presents itself regularly with a round of conferences
under the title „Energy For The Future“. These conferences are focused
on everything in the field of energetics with clear perspectives, on power
production from renewable sources including safe use of nuclear energy.
Computer technology
Most of the manufacturing plants within this branch were “Greenfield”
projects, while to a limited extent, buildings of former enterprises were
also used. These companies are strongly influenced by globalization
or by the participation of foreign investment capital. The majority of
produced computers is exported on global markets. Through supranational
companies, Czech Republic has joined other territories with developed
www.electroindustry.cz
production of competitive computer technology. There are also successful
software-designing companies in the Czech Republic, not only in relation to
the localization of worldwide software products or to the delivery of these
services to Czech enterprises or state agencies.
AV Engineering, Electronic Components
Significant changes occurred in the production of electronic components
and telecommunications. New production units came into being and the
product range changed. Facilities for the production of equipment for
higher-level telecommunication systems, radio and television transmitters
and transmission systems were modernised; new production centres of
supranational companies were built.
Instruments and Automation Equipment
In contrast to other electro-technological branches, there was not such
a strong increase of foreign capital participation in this group. However,
Czech domestic market hosts most of the important international
companies that are dealing with production and distribution of
measuring, regulation, automation and medical equipment. They do
not only deliver their products, but also carry out project designing
and servicing. Automation technology products show a high level of
innovation, and thanks to the innovation cycle growing longer, these
are becoming the priority of the electro-technology branch in the Czech
Republic. Therefore, the Czech and Moravian Electrical and Electronic
Association in cooperation with the company Veletrhy Brno a.s. prepared
trade-fair-targeted products focused on automation technology visions
and on the ever-developing tools allowing to proceed towards a „digital
factory“. This technology is presented every year at the most prestigious
Czech trade fair being the traditional International Engineering Fair in
Brno.
At the moment, under the influence of the financial crisis, another
restructuring in the Czech electric and electronic industry takes place
to the benefit of segments with longer innovation turnover and higher
added value. Once again the interest for segments rises that are seen as
traditional in the Czech Republic, especially in the area of heavy-current,
measuring, automation, and control technologies. These segments are the
least influenced areas by the current economic development, and they offer
opportunities for highly-qualified staff. The crisis thus becomes also an
opportunity to strengthen perspective industry areas.
n
100
95
75
25
5
0
210x148_5_AJ_NEW
15. prosince 2011 15:18:31
www.electroindustry.cz
5
CZECH AND MORAVIAN ELECTRICAL
AND ELECTRONIC ASSOCIATION
Ing. František Hýbner
Director of the Association
The association of electrical engineering companies has a long
tradition in our country. Czech entrepreneurs began to join the
Association of Czech Electro-Technicians at the end of the 19th and
the beginning of the 20th century while the Czechoslovak Electrotechnical Union was established in 1926. The activity of the union
was suppressed in 1948 with the onset of the communist regime.
After the Velvet Revolution in 1989, companies from the electronic
industry and those in the business of electrical engineering
joined together to form the electrical engineering section of The
Confederation of Industry. Several years later, in January 1992,
the economically and legally independent body – The Czech and
Moravian Electrical and Electronic Association (EIA) was formed.
Contemporary, the 20- years old history of the association is also
very rich and fruitful. Not only in regards of new electrical and
electronic technologies, their application in the industry or new
products, but also in the point of view of economical and political
changes. The most important changes concerned structural
changes in factories, new threats and opportunities on the market.
A lot of these changes were in relation to the important rise of
foreign investments, connection of our companies with the supranational corporations or after Czech Republic had entered EU. All
of these aspects impacted member companies of association, their
approach to the innovations, changes in business policy and into
the searching for new markets. The crisis was not only the threat,
but also the opportunity for changes. Not all companies succeeded.
However, plenty of companies run their business with the higher
vitality, effectiveness and the work productivity. The crises showed
that the right strategy to face it successfully is a new innovation
6
and the more effective production. Our companies pay attention to
ensure highly qualified human sources. We have obtained valuable
experiences while using EU structural funds.
EIA is a free union of entrepreneurs and employers and
associates the most significant domestic producers and suppliers
of the electrical and electronic industries as well as of information
technology. Its members include both domestic branches of large
international corporations and also medium and small enterprises
in the ownership of domestic capital. The proportion of members
in the Czech and Moravian Electrical and Electronic Association
within all electrical production in the Czech Republic has been
approximately 70 % for a long period of time. EIA is an important
member of the Confederation of Industry of the Czech Republic,
which is an umbrella organization for approximately 30 member
organizations, associations and unions operating in various sectors
of Czech industry. EIA members may take advantage of services
offered by this confederation.
The Czech and Moravian Electrical and Electronic Association
is an important partner of the trade union KOVO. The collective
agreement is obligatory for each ElA member and guarantees the
agreement between employers and employees. Ensuring of the
social conciliation we consider as the fundamental precondition for
successful overcoming of present crisis.
Our association coordinates steps of domestic enterprises to
ensure joint interests. To put it simply, the ElA is an industrial and
business lobby group striving to support business, to help skilled
manufacturers succeed and to improve the competitiveness of
Czech enterprises, the association often stands in opposition to
government intervention. ElA representatives formulate objectives
and define instruments of institutional insurance. ElA does not
favour any specific political party and exerts consistent effort in
keeping a non-political position. Most ElA member organizations
have the advantage of a highly qualified work force together with
environmentally friendly production.
ElA has developed connections with partner organizations in most
industrial countries and maintains contacts with foreign unions of
entrepreneurs and their chambers. Our association collaborates
www.electroindustry.cz
with them to assist in establishing direct contacts between domestic
and foreign businessmen and to exchange our experiences. ElA
also organizes visits of foreign entrepreneurs to selected plants in
the Czech Republic. ElA coordinates participation of its members
in missions of Czech representatives abroad, establishes contacts
with commercial counselors and seeks cooperation for Czech
enterprises in foreign countries.
Another part of association’s work is consultancy environmental
legislation which affects the electro-technical industrial production.
ElA established a subsidiary company RETELA for ensuring the
issues in the scope of the European Direction 2002/96/EC (Waste of
Electrical and Electronic Equipment) and for purpose of the pursuit
of the collective system RETELA, which manufactures of waste
electrical and electronic equipment.
During a relatively short period, ElA has demonstrated that the activity of
the association has been successfully reformed in the category of industry
with most dramatic changes in the Czech Republic. The membership of
domestic companies in ElA has become important for their economic
stability and for reliable relationships with their business partners.
In the frame of the Operational Program Human Resources
and Employment we are running the project „Through education
to higher adaptability and competitiveness“, which help member
companies with employee education and training.
n
210x148_Directory.indd 1
07.10.11 07:12
www.electroindustry.cz
7
85 years of the Electrotechnical Testing Institute
The state enterprise Electrotechnical Testing Institute – EZÚ celebrated
its 85-th anniversary recently. The institute was founded by then
Electrotechnical Union of Czechoslovakia – ESČ and it began its activities
by testing of fuses in laboratories of Czech Technical University in Brno in
1926. The testing laboratory built up its own laboratories and significantly
extended its services after relocation to Prague. The laboratory moved its
facilities to the present location in Prague – Troja in 1948.
The initial mission of the institute was testing of product against electrical
safety standards. The ESČ mark is used up to these days for marking of
products, which comply with electric safety standards and the compliance
is verified by relevant testing. That is why EZÚ uses a new marketing
interpretation of its traditional mark ESČ – Electrical Safety Certified.
EZÚ further carries out product testing from the point of view of
electromagnetic compatibility and testing relevant to many aspects
of product resistance to environment effects.
The institute´s conformity assessment services are supported by
official delegation of the Czech government. EZÚ is notified body
No. 1014 for conformity assessment of products according to the low
voltage, electromagnetic compatibility, medical devices and machinery and
construction products directives. Based on the government´s delegation EZÚ
further carries out homologation of electrical and lighting accessories of motor
vehicles and attestation of gambling machines and technical equipment for
lotteries and similar games.
The international recognition belongs to the most important attributes of
the EZÚ´s services that are based on the institute´s involvement in international
and European systems for products testing and certification. EZÚ further
provides calibration and inspection services and management system
certification. EZÚ closely cooperates with CQS – Czech association for quality
systems certification, which is entitled to issue international certificates IQNet
for management systems.
EZÚ systematically enhances quality and competence of its services that
are verified by accreditations, international assessments and comparative
testing. The EZÚ mission is to provide to its customers complex and highly
competitive services and in this manner fulfill company´s slogan:
Trust in us, we verify for you.
Dr. Vladimír Filiač
Anglicky 190 x 128.5 8/8/08 7:59 PM Stránka 1
ELECTROTECHNICAL TESTING INSTITUTE - EZU
Notified body No. 1014 and Authorized Body No. 201
Pod Lisem 129, 171 02 Praha 8-Troja, Czech Republic
tel.: +420 266 104 111, fax: +420 284 680 070
certif@ezu.cz
www.ezu.cz
TRUST IN US, WE TEST FOR YOU
We offer you testing, certification, inspections, calibrations and other conformity assessment services
● FOR YOUR PRODUCTS:
● FOR YOUR COMPANY:
- Testing and conformity assessment for CE marking
according to various EU directives
- Electrical safety and EMC testing
- National certification - EZU certificates and ESâ mark
- International certification - CB and CCA certificates
and ENEC and HAR marks
- Homologation of motor vehicle accessories
according to UN/ECE regulations for E8 mark
- Vibration, noise, climatic, corrosion, hygienic tests,
EMF and EPD measurements and other special tests
- Determination of hazardous substances content
according to RoHS directive
- Luminaries light parameters measurements
- Gambling machines and lottery systems attestation
- Czech Quality program certification
- Calibration services
- Management systems certification according to:
- EN ISO 9001 for quality management
- EN ISO 13485 for quality management of medical devices
manufacturing and services
- EN ISO 14001 for environmental management
- OHSAS 18001 for Occupational Health and Safety management
- ISO/IEC 27001 for Information security management
- IQNet management systems certification
- CQS management systems certification
- IT services certification according to:
- âSN ISO/IEC 20000 for IT services quality management
- ISVS for public administration information systems attestation
- EMAS Environmental declaration verification
- Low voltage electrical equipment inspections
T E S T I N G
8
A N D
C E R T I F I C A T I O N
www.electroindustry.cz
S I N C E
1 9 2 6
The Czech Accreditation Institute – the only national accreditation
body in the Czech Republic notified by the European Commission.
The Czech Accreditation Institute (CAI) is a non-profit organization
established by the Czech Republic. With the decision of the Minister
of Industry and Trade concerning the notification of the European
Commission about the CAI, the CAI is the only formally recognized
Czech national accreditation body authorized to carry out accreditation
in conformity with the regulation (EC) No. 765/2008 of the European
Parliament and of the Council.
CAI has been entrusted with the accreditation of the following
conformity assessment bodies:
Bodies conducting testing and calibration according to the Standard
ČSN EN ISO/IEC 17025:2005
Bodies conducting inspections according to the Standard ČSN EN ISO/
IEC 17020:2005
Bodies conducting certification of products according to the Standard
ČSN EN 45011:1998
Bodies conducting certification of management systems according to
the Standard ČSN EN ISO/IEC 17021:2007
Bodies conducting certification of persons according to the Standard
ČSN EN ISO/IEC 17024:2003
Medical laboratories according to the Standard ČSN EN ISO 15189:2007
Verifiers of greenhouse gas emission reports according to the Standard
ČSN EN 45011:1998 with regard to the Act No. 695/2004 Coll. and the
Decree No. 696/2004 Coll.
Verifiers of the environmental declaration in the EMAS program according
to the regulation (EC) No. 761/2001 of the European Parliament and of the
Council
Proficiency testing providers according to the Standard ČSN EN ISO/IEC
17043:2010
The CAI is a member of the following international organizations
dealing with accreditation: European co-operation for Accreditation (EA),
International Laboratory Accreditation Cooperation (ILAC), International
Accreditation Forum (IAF), Forum of Accreditation and Licensing Bodies
(FALB). In view of the fact that CAI is a member of above mentioned
organizations, the results of the accreditation body and of the accredited
conformity assessment bodies’ are accepted not only inside and outside the
Czech Republic, but outside the European Union also.
Czech Accreditation Institute, o.p.s.
Olšanská 54/3, 130 00 Prague 3
Tel.: +420 272 096 222, Fax: +420 272 096 221
e-mail: mail@cai.cz, website www.cai.cz
www.electroindustry.cz
9
x
Main activity fields of the company
ABB s.r.o.
x
x
x
AiP Beroun s.r.o.
x
x
AiP Safe s.r.o.
x
x
ALPS Electric Czech, s.r.o.
x
Amest s.r.o.
x
x
x
x
x
ATAS elektromotory Náchod a.s.
x
x
x
x
Atos IT Solution and Services, s.r.o.
x
BEMOTRADE, a.s.
x
x
x
Blumenbecker Prag s.r.o.
x
x
x
B-support, s.r.o.
x
CESA ENGINEERING a.s.
x
x
x
x
x
x
x
DART spol. s.r.o.
x
DataCon MSI s.r.o.
x
DINASYS, s.r.o.
x
EBM, s.r.o.
ELCOM, a.s.
x
x
x
x
ELKO EP, s.r.o.
x
EPCOS s.r.o.
x
x
x
x
x
x
x
x
x
x
x
x
ERA COMPONENTS spol. s.r.o.
x
x
x
x
ETD TRANSFORMÁTORY a.s.
EXIMET TRAFO spol. s.r.o.
x
x
Elektroprim - Koutník, a.s.
ELSO PHILIPS SERVICE spol. s.r.o.
x
x
x
x
x
Faculty of EE CTU in Prague
x
Faculty of EEC Brno University of Technology
x
Faculty of IT Brno University of Technology
x
FCC průmyslové systémy s.r.o.
10
Special services
x
Trading company
Industrial process control equipment
Medical instruments
Consumer electronic goods
Radio, TV and communication equipment
Electronic components
Other electrical equipment
Lighting equipment
Measuring instruments and appliances
List of companies
Insulated wire and cables
Electricity distribution apparatus
Electric motors, generators
and transformers
Office and computing machinery
Doudlebská 5, 140 00 Praha 4, Czech Republic
Phone: +420 261 213 623, Fax: +420 261 213 624
E-mail: ela@electroindustry.cz,
www.electroindustry.cz
Engineering
CZECH AND MORAVIAN
ELECTRICAL AND ELECTRONIC
ASSOCIATION
x
x
x
x
x
FCC PUBLIC s.r.o.
x
FVE BS s.r.o.
x
GIVERSDON s.r.o.
x
www.electroindustry.cz
Special services
Industrial process control equipment
Measuring instruments and appliances
Medical instruments
Consumer electronic goods
Radio, TV and communication equipment
Electronic components
Other electrical equipment
x
x
KB CAR, s.r.o.
KPB INTRA s.r.o.
x
x
x
x
MESING, spol. s.r.o.
MINERVA BOSKOVICE, a.s.
x
Main activity fields of the company
Helukabel CZ s.r.o.
LUX spol. s.r.o.
Trading company
List of companies
Lighting equipment
Insulated wire and cables
Electricity distribution apparatus
Electric motors, generators
and transformers
Office and computing machinery
Doudlebská 5, 140 00 Praha 4, Czech Republic
Phone: +420 261 213 623, Fax: +420 261 213 624
E-mail: ela@electroindustry.cz,
www.electroindustry.cz
Engineering
CZECH AND MORAVIAN
ELECTRICAL AND ELECTRONIC
ASSOCIATION
x
x
mivvy a.s.
x
x
x
National Technical Museum
OEZ s.r.o.
x
x
x
x
Panasonic AVC Network Czech, s.r.o.
x
PIKE AUTOMATION spol. s.r.o.
x
x
PROSPEKSA, a.s.
RCD Radiokomunikace spol. s.r.o.
x
x
x
x
x
SAFINA, a.s.
x
Sdělovací technika spol. s.r.o.
x
Schmitt & Schmitt s.r.o.
x
Siemens Group ČR
x
Siemens Industry Software, s.r.o.
x
SYSGO s.r.o.
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Systems Consulting s.r.o.
x
TES VSETÍN s.r.o.
x
TESLA Holding a.s.
x
x
TESLA Mladá Vožice a.s.
x
x
x
x
x
x
x
x
x
x
UniControls a.s.
x
x
x
x
UVR Mníšek pod Brdy a.s.
x
x
Veletrhy Brno, a.s.
x
x
VUES Brno s.r.o.
x
VUVL a.s.
x
ZPA Brno, spol. s r. o.
x
ZPA Smart Energy a.s.
x
x
x
x
x
x
x
www.electroindustry.cz
x
x
x
x
x
x
x
11
A
ABB s.r.o.
CZ ABB Country Management
President: Hanu Kasi
Senior Vicepresident: Ing. Vladimír Kysela
Senior Vicepresident: Ing. Richard Kuba, CSc.
Sokolovská 84 – 86
186 00 Praha 8
Phone: +420 234 322 111
Fax:
+420 234 322 113
E-mail: helena.endalova@cz.abb.com
www.abb.com/cz
ABB (www.abb.com) is a leader in power and automation technologies that enable utility and
industry customers to improve performance while lowering environmental impact. The ABB
Group of companies operates in around 100 countries and employs around 130,000 people. The
company has been present in the Czech Republic since 1970 and today employes about 3 000
people. The Czech ABB can use the international know-how and the latest results of the research
and development achieved by the global company. It offers its customers a value added in the
form of a strong base of its own engineering and service centres and long-standing experience
of traditional Czech producers. Nowadays ABB s.r.o. has five divisions.
Classification of activities: 31.20.0, 31.20.1, 31.10.2, 31.20.3, 31.20.9, 31.62.0, 31.62.1, 31.62.9,
32.30.0, 33.30.1
Annual sales: N/A
Employees: 3 000
AiP Beroun s.r.o.
www.aipberoun.cz
The focus of the activities of AiP Beroun is the digitisation of manuscripts, rare prints, paintings,
posters, maps and other documents, making the digitised materials available on the internet. An
important project is the development and operation of the Manuscriptorium digital library. AiP
Beroun is also involved in electronic publishing.
Classification of activities: 22.00.0, 72.00.0, 51.10.0, 72.10.1, 72.20.2
Annual sales:
N/A
Employees:
N/A
Director: Ing. Stanislav Psohlavec
Talichova 807
266 01 Beroun
Phone: + 420 311 611 238, 257 327 037
Fax:
+420 257 322 033
e-mail: info@aipberoun.cz
AiP Safe s.r.o.
www.aipsafe.cz
AiP Safe develops DMS and ECM solutions which focus on electronic document creation, authoring,
workflow and long-term preservation, Common solutions include records management, contract
management or compliance & corporate governance amongst others.
Classification of activities: 72.00.0, 72.20.2
Annual sales:
N/A
Employees:
N/A
Director: Ing. Jan Mottl
Talichova 807
266 01 Beroun
Phone:
Fax:
e-mail:
+420 311 611 237, 257 327 037
+420 257 322 033
info@aipsafe.cz
ALPS Electric Czech, s.r.o.
General Manager: Hideaki Terasaki
Plant Manager: Ing. Milan Cisár
Human Resources Senior Manager:
Ing. Tomáš Leder
Sebranice 240
679 31 Sebranice
Phone:
Fax:
e-mail:
12
www.alps.cz
Our company is OEM manufacturing company. We can assembly any electrical parts or products
including suppliying of all components (incl. plastics), if required. Also we have Tampoprint
technology for printing housing or other plastic parts. Our goal is to supply our customers with
top quality products or services on the very competitive prices. We can offer big flexibility on
level of production. Our way is to find the cheapest location for production, where the high
quality of production can be reached. We have been driven by ISO 9001 quality since 2001, ISO
14001 since 2002 and automotive standard ISO TS 16 949.
Classification of activities: 32.10.0, 33.30.0, 31.61.2
Annual sales:
700 mil. CZK
Employees:
550
+420 516 490 111
+420 516 455 980
jobs@alps.c z
www.electroindustry.cz
A-B
Amest s.r.o.
www.amest.cz
Development, design, production, assembly, and service of measuring devices for checking of
dimensions of parts in serial production. The main customer is ŠKODA AUTO, where is more than 200
of control devices installed on production lines. In the year 2000 was nominated on the gold medal
the Amest Piston control, in the year 2001 was nominated on the gold medal the Gearbox control, in
the year 2002 was nominated on the gold medal the Gearing control. Automatic measuring station
Amest for a dimensional and geometric control of shafts won at the fair in Brno 2008 appreciation
Gold Medal and Annual price of Czech and Moravian Electrical and Electronic Association.
Classification of activities: 28.62.0, 30.02.1, 73.00.0, 74.30.0, 93.00.0
Annual sales:
60 mil. CZK
Employees:
30
Director: Ing. Jaroslav Staněk
Economic Manager: Alena Netíková
Commercial Director: Bc. Aleš Folwarczny
Phone:
Fax:
e-mail:
www.atas.cz
Ke Kablu 378
102 00 Praha 10
+420 272 702 025, 272 704 121
+420 272 705 754
info@amest.cz
ATAS elektromotory Náchod a.s.
Our company was established in 1928. We produce small electric motors up to 1 kW, induction
electric motors up to 800 W, DC electric motors up to 1 kW, EC electric motors, resolvers, axial
and radial fans, stamps for are sharp for punching of parts of electric motors, a casting mould
under the pressure of plastic and aluminium alloys.
Classification of activities: 28.62.0, 31.10.0, 31.10.1, 31.10.2, 31.10.6
Annual sales:
400 mil. CZK
Employees:
750
General Director: Ing. Otto Daněk
Commercial Director: Ing. Josef Kůst
Technical Director: Ing. Milan Horochovský
Bratří Čapků 722
547 30 Náchod
hone:
P
Fax:
e -mail:
www.cz.atos.net
+420 491 446 111, 491 446 219
+420 491 423 946
prodej@atas.cz
Atos IT Solutions and Services, s.r.o.
Atos is an international information technology services company with annual 2010 pro forma
revenues of EUR 8.6 billion and 74,000 employees in 42 countries. Serving a global client base,
it delivers hi-tech transactional services, consulting and technology services, systems integration
and managed services. With its deep technology expertise and industry knowledge, it works
with clients across the following market sectors: Manufacturing, Retail, Services; Public, Health &
Transport; Financial Services; Telecoms, Media & Technology; Energy & Utilities.Atos is focused
on business technology that powers progress and helps organizations to create their firm of the
future. It is the Worldwide Information Technology Partner for the Olympic Games.
Classification of activities: 72.20.2, 72.20.3, 72.30.1, 72.50.1, 72.60.1
Annual sales:
1.348 mil. Kč.
Employees:
356
CEO: František Kostka
CFO: Ing. Eva Smolíková, Ph.D.
Doudlebská 1699/5
14000 Praha 4
hone:
P
e -mail:
+420 233 034 211
jitka.ajmova@atos.net
BEMOTRADE, a.s.
Database services, network administration. Production, installation and repair of electronic
equipment. Providing software and consultancy in the field of hardware and software.
Classification of activities: 72.00.0, 31.62.0
Annual sales:
2, 26 mil. CZK
Employees:
5
Director: Mgr. Petr Svoboda
Na Rokytce 274
Phone:
Fax:
e-mail:
www.electroindustry.cz
251 01 Říčany
+420 235 350 353, 777 918 250
+420 220 920 189
bemotrade@gmail.com
13
B-D
Blumenbecker Prag s.r.o.
General Manager: Ing. Vladimír Lhotský
Financial Director: Ing. Jana Chládková
Marketing Manager: Ing. Jan Svárovský
Počernická 96
108 00 Praha 10
Phone:
Fax:
e-mail:
+420 296 411 630, 296 411 610
+420 296 411 620
info@blumenbecker.cz
www.blumenbecker.cz
Engineering: projects for automation systems of technological processes, programming of
control systems and visualization, regulated drives, robotic cells (welding, camera viewing),
structured industrial networks, electro design, technical support, training. System integrator
partner of SIEMENS, ROCKWELL and PHOENIX CONTACT for industrial automation. Certificate
DIN EN ISO 9001:2008.
SALE: all into low-voltage control cabinets, cables, all components for SIMATIC and PROFIBUS
of SIEMENS, SIEMENS drives of all outputs, all components for field bus INTERBUS of PHOENIX
CONTACT, industrial robots KUKA, FANUC, operator panels SWAC.
Classification of activities: 33.30.0, 33.30.1, 51.10.0, 31.20.3, 33.20.4
Annual sales:
210 mil. CZK
Employees:
75
B-support, s.r.o.
www.b-support.cz
We are still growing company trying to maximize customer satisfaction. We are mainly involved
in: training and consulting activities in eco-design,WEEE, RoHS, REACH and other related areas;
project processing, managing, administration and self-share of science and research projects
Classification of activities: 33.20.0, 33.20.6, 33.20.8, 51.70.0, 52.00.0, 72.10.1, 72.20.2, 72.20.3,
72.60.1, 73.00.0
Annual sales:
N/A
Employees:
4
Director - holder: Ing. Bořivoj Bohuslav
Darwinova 553/12
143 00 Praha 4
Phone:
Fax:
e-mail:
+420 224 262 510
+420 224 261 268
b-support@b-support.cz
CESA ENGINEERING a.s.
www.cesaengineering.com
The company is engaged in R & D, innovation and in the electronics and communications
technologies and Specialist manufacturing sector. It cooperates with universities, research
institutes, research organizations.
Classification of activities: 73.00.0, 31.62.0, 32.20.9
Annual sales:
200 mil.
Employees:
8
Chairman of the Board: René Milačič
Vladimír Tulek
Příkop 838/6
602 00 Brno
Phone: +420 517 070 565, 517070566
Fax:
+420 530 508 199
e-mail: info@cesasat.cz
DART Ltd.
Director: Ing. Jan Jalovec
Executive Director: Tomáš Jalovec
www.dart-expo.cz
Sales promotion for foreign companies on the czech market. Public relation and advertising
services for electrotechnical industry. Realization and organizational development of fairs and
exhibitions in the Czech Republic and in the world. Member of Czech Chamber of Commerce and
Czech Fair Association. Design and realization of stands on fairs and exhibitions. Publishers and
graphic activities, webdesign and internet servises.
Classification of activities: 22.00.0, 74.40.0, 93.00.0
Annual sales:
N/A
Employees:
N/A
Habrová 447
250 64 Měšice
Phone: +420 222 585 627
Fax:
+420 910 440 920
e-mail: info@dart-expo.cz
14
www.electroindustry.cz
D-E
DataCon MSI s.r.o.
www.datacon.cz
Manufacturing: Sensors, Accessories and Recorders for blood and pressure.
Classification of activities: 31.62.0
Annual sales:
12 mil. CZK
Employees:
7
Director: Ing. Martin Šilhavý
1. pluku 12a
186 00 Praha 8
hone:
P
Fax:
e -mail:
+420 224 816 858, 222 315 942
+420 224 816 858
datacon@datacon.cz
DINASYS, s.r.o.
www.dinasys.cz
Information systems and guidance systems for sightless Distribution of HW, components, UPS
(everything is possible to order also through our e-shop).
Classification of activities: 33.10.0, 33.20.0, 72.60.1, 72.20.3, 72.20.2, 30.02.1
Annual sales:
N/A
Employees:
N/A
Director: Ing. Martina Turpin, MBA
Darwinova 553/12
143 00 Praha 4
hone:
P
Fax:
e -mail:
+420 224 240 947
+420 224 261 268
martina.turpin@dinasys.cz
EBM, s.r.o.
www.ebmbrno.cz
EBM has been operating on the market since 1994. Its principle activities are: Comprehensive
supply of environment-management technology in buildings (high- and low-voltage electric
installations, measuring and regulation, air-conditioning and heating, fire-protection solution)
– design, supply, assembly, maintenance and facility management, energy management. The
Company has been certified with ČSN EN ISO 9001:2001 and ČSN EN ISO 14001:2005.
Classification of activities: 31.62.9
Annual sales:
220 mil. CZK
Employees:
48
General Director: Ing. Jiří Šrámek
Haškova 17
638 00 Brno
hone:
P
Fax:
e -mail:
+420 532 291 100
+420 532 291 101
ebm@ebmbrno.cz
ELCOM, a.s.
www.elcom.cz
ELCOM, Inc. has been making business in the field of power electrical engineering, energy
engineering, virtual instrumentation and it is divided to the five divisions. Division of Applied
Electronics has been working on research, development and production of special power
electronic devices; Division of Drives and Motors is specialized workplace for delivering of
electromotors and whole regulated drives, mainly in explosion-proof design; Division of
Realization and Design specializes in compensations and substation for low and high voltage
levels; Division of Manufacturing serves as a production and material-logistic unit for all other
division; Division of Virtual Instrumentation was founded in Science and Technological Park
Ostrava. It provides services in the system integration, designing and delivering of measuring
and testing workstations that are based on virtual instrumentation.
Classification of activities: 31.10.0, 31.20.0, 31.20.1, 31.20.3, 31.20.4, 33.20.0, 33.20.8,
73.00.0, 93.00.0
Annual sales:
300 mil. CZK
Employees:
140
www.electroindustry.cz
Chairman of the Board: Ing. Jiří Holoubek
General Director: Ing. Vladimír Korenc
Na Větrově 34
142 00 Praha 4
hone:
P
Fax:
e -mail:
+420 261 109 666, 261 109 665
+420 261 109 667
jiri.holoubek@elcom.cz,
vladimír.korenc@elcom.cz
15
E
Elektroprim - Koutník, a.s.
Chairman of the Board and CEO:
Pavel Koutník
Member of the Board: Ivo Koutník
Financial Director: Alena Zemanová
www.elektroprim.cz
External electrotechnical installation of a power, communication and data network from project
trough supplies, implementation and commissioning.
Classification of activities: 28.00.0, 31.20.0, 31.20.9, 31.61.0, 31.62.0, 31.62.9, 33.30.0, 33.30.1,
51.10.0, 74.20.1
Annual sales:
416 mil. CZK
Employees:
66
Baarova 3/58
140 00 Praha 4 - Michle
Phone:
Fax:
e-mail:
+420 241 004 722, 739 419 481
+420 241 004 721
elektroprim@elektroprim.cz
ELKO EP, s. r. o.
Head Executive: Jiří Konečný
Company Director: Martin Gahura DiS.
Palackého 493
769 01 Holešov-Všetuly
Phone:
Fax:
e-mail:
+420 573 514 212, 573 514 213
+420 573 514 227
elko@elkoep.cz
www.elkoep.cz
Products of the Company are modular electronic devices, installation devices for protection and
switching, RF Control – wireless control system , iNELS – intelligent electronic system including
its modified version iNELS Multimedia. For several years our company has had a quality
management system certified to ISO9001 and Environmental management system certified to
ISO14001. Our super-multifunction relay SMR was awarded „Golden product“ (Automation area)
on fair Elektrotechnika 99 – Ostrava. We have obtained the Honourable mention for product SHT
(time switch) and for product HDUI ( monitoring relay for 3-phase net control). Technological
Entrepreneur of the year 2004 became the Head Executive of ELKO EP - Jiří Konečný. Among our
latest awards – Grand prix for system iNELS Multimedia on exhibition Electron 2011 and Golden
Amper for product RF Touch on international fair Amper 2011.
Classification of activities: 31.20.0
Annual sales:
208 mil. CZK
Employees:
180
ELSO PHILIPS SERVICE spol. s r.o.
Director: Ing. Otakar Chasák
Security Director: Mgr. Petr Svoboda
Sales Director: Jaroslava Žáčková
Kladenská 1879/3
160 00 Praha 6
Phone:
Fax:
e-mail:
ELSO-PHILIPS SERVICE spol. s r.o. is 100% Czech private company without any foreign capital.
Our company is distributor or system partner of brand name products like ASSEMBLÉON,
PHILIPS, OLIVETTI, HEWLETT PACKARD and FLUKE. We are concentrating on complex
sophisticated projects for state organisations like Ministries, hospitals, banks, VZP, education
and foreign companies. We are suppliers of information technology and SMT technology for
instance for VZP, hospital Královské Vinohrady, hospital Benešov, Czech Army, Slovac Army,
Project Comenius, Ministry of Health, UZIS, company TOYOTA, BRAUN medical, PHILIPS etc.
Classification of activities: 30.01.2, 30.01.9, 30.02.1, 30.02.9, 32.10.3, 51.70.0, 70.20.0,
72.20.2, 72.20.3, 72.60.1
Annual sales:
400 mil. CZK
Employees:
25
+420 235 355 991, 235 350 353
+420 235 354 986
petr.svoboda@elso-group.cz
EPCOS s.r.o.
President and CFO: Ing. Jiří Fibigr
Executive Vice President and COO:
Ing. Vladimír Kadlec
Executive Vice President and COO:
Ing. Jaroslav Milota
Feritová 1
787 15 Šumperk
Phone:
Fax:
e-mail:
16
www.elso-group.cz
+420 583 360 101, 583 360 100
+420 583 360 150
sekretariat.sk@epcos.com
www.epcos.com
EPCOS Ltd. is the successor company of Siemens Matsushita Components Ltd., which was founded
in 1999 as the only one Czech branch of an international concern known as EPCOS. Into new
built production halls in 2000 was a step by step transfered production from the foreign plants of
ferrites division, from Germany and France. In years 2005-2009 the production was extended by
transfer of production of ceramic components from Austria. The production range of EPCOS Ltd.
covers approximately two thousands types of ferrite cores and over three thousands ceramic PTC
thermistors. 98 percent of the products are exported to customers outside the Czech Republic.
In year 2009 was founded in Tokio new corporation - TDK-EPC. Concern EPCOS belongs to TDK
group producing wide spectrum of electronic components with consolidated sales over 7 billion
Euro and employing over 88 thousand employees around the world.
Classification of activities: 31.62.0, 28.40.0
Annual sales:
1 430 mil. CZK
Employees:
900
www.electroindustry.cz
E-F
www.eracomponents.cz
ERA COMPONENTS spol. s r.o.
Distribution and sales of electronic components. Authorized distributor STMicroelectronics and
RECTRON. Representation of SYFER Technology England and Novacap USA. Distribution and
sales of electronic components from the most eminent world producers.
Classification of activities: 31.10.4, 32.10.1, 32.10.2, 32.10.5, 51.10.0, 51.70.0, 93.00.0, 32.10.6
Annual sales:
N/A
Employees:
7
Director: Ing. Michal Bělavský
Michelská 12a
140 00 Praha 4 - Michle
hone:
P
Fax:
e -mail:
ETD TRANSFORMÁTORY a.s.
www.etd-bez.cz
The main production:
Three-phase regulating oil transformers up to 320 MVA (420 kV); Three-phase non-regulating
oil transformers up to 410 MVA (420 kV); Single-phase non-regulating oil transformers with the
total power output of a three-phase composition up to 1200 MVA (420 kV); Regulating and nonregulating transformers of special manufacturing; Locomotive transformers; Furnace transformers;
Traction chokes for the rail vehicles drives; Starting reactors; Revisions, Repairs and reconstructions
performed directly in the plant or at the customer´s place, 24 hour service.
Classification of activities: 31.10.0
Annual sales:
716,7 mil. CZK
Employees:
190
Member of the Board: Ing. František Říšský
Zborovská 22/54
301 00 Plzeň
hone:
P
Fax:
e -mail:
www.eximettrafo.cz
+420 378 117 701
+420 378 118 008
etd@etd-bez.cz
EXIMET TRAFO, spol. s r.o.
Single-phase transformers with power rating 7 VA...400 kVA, Voltage range till 1 kV. Three-phase
transformers with power rating 250 VA...600 kVA, Voltage range till 1 kV. HV Transformers with
power rating till 6 MVA, Voltages 3,6,10,22,35 kV. Rectifier, Furnace, Special Transformers (earth,
HV sources, etc). HV Cast Resin Transformers, Oil Transformers. Transformers for isolated medical
systems with power rating 3,15...8 kVA. Filter, Compensative, Air core smoothing reactors, Limitating
and Special reactors. Toroidal transformers,Transformers for halogen lighting. Series resistance for
mercury vapour lamp & sodium discharge lamps. The quality of products corresponds to European
norms and quality standards IEC and certificate ISO 9001.
Classification of activities: 31.10.4, 31.10.0, 28.40.0, 28.52.0, 28.62.0, 28.00.0, 51.10.0, 28.51.0
Annual sales:
3,2 mil. EURO
Employees:
49
www.fel.cvut.cz
+420 241 483 138, 241 480 135
+420 241 481 161
era@comp.cz
Owner, General Director: Ing. Jaroslav Cigánek
Hrabákova 1978
149 00 Praha 4
hone:
P
Fax:
e -mail:
+420 515 231 226, 515 231 210
+420 515 231 104
j.ciganek@eximettrafo.cz
Faculty of electrical engineering CTU in Prague
Faculty provides university education in the bachelor (B.Sc.), master (M.Sc.) and doctoral (Ph.D.)
studies. Study programmes offer six majors, like Electrical Engineering and Informatics, Software
Technologies and Management, Cybernetics and Robotics ect. Research and development are
carried out in the following fields: measurement systems, advanced radio systems, intelligent
decision support and control systems, CIM, robotics, modelling and control of dynamic systems,
biomedical engineering, sensors and microsystems, design, modelling, simulation and diagnostics
of microelectronic and optoelectronic structures, analysis and synthesis of circuits in A/D systems
and more. Faculty provides programmes and courses to support futher training and education. FEE
offers study programmes for lifelong learning to everyone interested in development in electrical
engineering and informatics.
Classification of activities: 22.00.0, 22.11.1, 73.00.0, 93.00.0
Annual sales:
N/A
Employees:
650
www.electroindustry.cz
Dean: Prof. Ing. Pavel Ripka, CSc.
Deputy Dean: prof. Ing. Zbyněk Škvor, CSc.
Technická 2
166 27 Praha 6 - Dejvice
hone:
P
Fax:
e -mail:
+420 224 310 015, 224 352 016
+420 224 310 784
dean@fel.cvut.cz
17
F
Faculty of Electrical Engineering and
Communication Brno University of Technology
Dean: Prof. Ing. Jarmila Dědková, CSc.
Vice-Dean, Statutory Deputy:
Prof. RNDr. Vladimít Aubrecht, CSc.
Secretary: Ing. Miloslav Morda
Technická 3058/10
616 00 Brno
Phone: +420 541 146 335, 541 146 334
Fax:
+420 541 146 300
e-mail: dekan@feec.vutbr.cz
The faculty provides university education in a three-year Bachelor´s programme (Bc.), two-year
Master´s programme (Ing.) and a four-year Doctoral (Ph.D.) study programme called Electrical
Engineering and Communication. Further it provides education in a three-year Bachelor´s programme
(Bc.) Biomedical Technology and Bioinformatics. Tuition is offered in following study areas:
Automation, Robotics, Electronics and Communication, Microelectronics, Teleinformatics, Biomedical
and Ecological Engineering, Power Electrical Engineering, Electrical Manufacturing and Management,
Communications and Informatics, Physical Electronics and Nanotechnology, Mathematics in Electrical
Engineering and more.
Classification of activities: 22.00.0, 22.11.1, 72.00.0, 73.00.0, 93.00.0
Annual sales:
N/A
Employees:
350
Faculty of information technology
Brno University of Technology
Dean: Doc. Ing. Jaroslav Zendulka, CSc.
Vice-dean for External Relations:
Doc. Dr. Ing. Pavel Zemčík
Vice-dean for Development, secretary:
Ing. Zdeněk Bouša
Božetěchova 2
612 66 Brno
Phone:
Fax:
e-mail:
+420 541 141 144, 541 141 265
+420 541 141 246
info@fit.vutbr.cz
U Slovanky 1388/5
182 00 Praha 8
Phone:
Fax:
e-mail:
+420 266 052 098
+420 266 052 104
info@fccps.cz
www.fit.vutbr.cz
Faculty of Information Technology of Brno University of Technology provides education and research in
the field of information technology. The education is provided in the bachelor (Bc), master (MSc), and
doctoral (Ph.D.) study programmes. The bachelor study programme has a single branch, Information
Technology, the master study programme is provided 9 different specialized branches, and the Ph.D.
programme has a single branch, Information Technology. The faculty is active and succesfull in research
in the wider field of information technology and participates in a number of research projects funded
locally from the Czech national budget, by the European Union, or by other international sources.
Classification of activities: 73.00.0, 22.11.1, 72.00.0, 72.10.1, 72.20.3, 72.30.2, 72.60.1, 74.30.0,
93.00.0
Annual sales:
N/A
Employees:
100
FCC průmyslové systémy s.r.o.
Managing Director: Ing. Otto Havle, CSc., MBA
Business Consultant: Miloslav Folprecht
www.feec.vutbr.cz
www.fccps.cz
FCC prumyslove systemy s.r.o. is a technology-oriented trading company, representing important
manufacturers of industrial automation and communications equipment. Our portfolio of industrial
process control systems and components includes sensor systems, industrial busses, industrial
communication devices, industrial process control and telecommunications computer systems based
on PC’s. An important area of our focus covers machine vision systems applied in factory automation
and quality control. Our customers and partners are engineering companies and systems integrators
working in the field of control systems, industrial data communications and telecommunications. We
are a representative of companies such as ADVANTECH, AAEON, IEI, VIA Technologies, Westermo
Teleindustri, HMS Industrial Networks and PPT Vision. Since 1999, our company employs an ISO9001:2000 certified quality management system.
Classification of activities: 30.02.1, 31.62.1, 33.30.0, 72.00.0, 72.10.1, 72.20.2
Annual sales:
80 mil. CZK
Employees:
26
FCC PUBLIC s.r.o.
www.odbornecasopisy.cz
Technical literature publishing house, publishing of professional journals:
AUTOMA - journal for automation, regulating and control engineering in the field
ELEKTRO journal for electrical engineering in the field, SVĚTLO (=light) - journal for light and lighting
technology.
Classification of activities: 22.00.0, 74.40.0, 93.00.0
Annual sales:
15 mil. CZK
Employees:
10
Director: Ing. Emil Širůček
Pod Vodárenskou věží 4
182 00 Praha 8
Phone: +420 286 583 012
Fax:
+420 284 689 302
e-mail: public@fccgroup.cz
18
www.electroindustry.cz
F-K
FVE BS s.r.o.
Engineering services in development of photovoltaic power plants, intermediation of trade
and services.
Classification of activities: 74.20.1, 51.10.0, 74.30.0, 93.00.0
Annual sales:
N/A
Employees:
N/A
Director: Ing. Stanislav Adamec
Managing Director: Miloš Pospíšil
Managing Director: Ing. Ryan Strnad
Šedivská 838
561 51 Letohrad
hone:
P
e -mail:
+420 602 383 519
adamec@electroindustry.cz
GIVERSDON s.r.o.
www.azcasopis.cz
Publishing magazines AZ ELEKTRO.
Classification of activities: 22.00.0, 22.11.1
Annual sales:
N/A
Employees:
5
Head Executive and Managing Director:
Miloslav Levek
Veleslavínská 48/39
162 00 Praha 6
hone:
P
e -mail:
+420 602 226 270
giversdon@email.cz
Helukabel CZ s.r.o.
www.helukabel.cz
HELUKABEL® is a leading international manufacturer and supplier of wires & cables, custom
cables, cable accessories, data, network & bus technology and media technology, as well as preassembled cable protection systems for robotics and handling systems.
Classification of activities: 31.30.0, 93.00.0
Annual sales:
150 000 CZK
Employees:
13
Director: Ing. Soňa Levková
Managing Director: Dipl. Kfm. Stefan Meyer
Areál dolu MAX
273 06 Libušín/Kladno
hone:
P
Fax:
e -mail:
+420 312 672 620, 312 672 622
+420 312 672 621
levkova@helukabel.cz
KB CAR, s.r.o.
www.kb-car.cz
Sales, financing and other services in the field of cars.
Classification of activities: 93.00.0
Annual sales:
102 mil. CZK
Employees:
20
Director: Ing. Otakar Chasák
Na Hejtmance 169/111
293 01 Mladá Boleslav
hone:
P
Fax:
e -mail:
www.electroindustry.cz
+420 326 753 350
+420 326 753 352
info@kb-car.cz
19
K-M
KPB INTRA s.r.o.
www.kpbintra.cz
Design,manufacture and supply of current and voltage transformers and instruments.
Classification of activities: 31.10.4
Annual sales:
123 mil. CZK
Employees:
80
Director: Ing. Robert Knápek
Head of Business Department: Ing. Petr Novák
Head of Technical Department: Ing. Josef Stejskal
Žďánská 477
685 01 Bučovice
Phone: +420 517 380 388
Fax: +420 517 381 433
e-mail: knapek@kpbintra.cz
LUX spol. s r.o.
General Director: Ing. Milan Vičar
Commercial and Technical Director: Jiří Smetana
Marketing Manager: Ing. Milan Brejša
www.lux.cz
Capabilities machine and machine assembly design: division 1 - for factory automation,
division 2 - the waste disposal industry. Manufacturing of the machines according to our own
or customer‘s specifications and/or design. Machining CNC turning and milling, conventional
machining, grinding for the round and flat surface, mechanical assembly and electrical assembly
including wiring - High Quality.
Classification of activities: 29.00.0, 31.61.0
Annual sales:
156 mil. Kč
Employees:
70
Mlýnská 701
561 64 Jablonné nad Orlicí
Phone:
Fax:
e-mail:
+420 465 676 661
+420 465 641 421
post@lux.cz
MESING, spol. s r.o.
Executive Head: Ing. Richard Wittek
Executive Head: Ing. Jan Kůr
Executive Head: Ing. Stanislav Kirchner
Šámalova 60a
615 00 Brno-Židenice
Phone:
Fax:
e-mail:
www.mesing.cz
Measuring gauges for the length measurement designed and manu-factured according to
customers specifications in applications within the laboratory, workshops, in checking stations
and automatic sorting machines, automatic assembling machines for the electrotechnical
industry.The SPC based systems are delivered as a standard. MESING is the leading supplier of
calibrating gauges and the exclusive manufacturer of inductive length transducers in the Czech
Republic. MESING also offers an upgrading and modernising service for older gauges.
Classification of activities: 28.62.0, 33.20.0, 33.20.5, 33.20.7, 33.20.9, 73.00.0
Annual sales:
28 mil. CZK
Employees:
22
+420 545 426 213, 545 426 211
+420 545 426 219
info@mesing.cz
MINERVA BOSKOVICE, a.s.
Chairman of the Board: Ing. František Hrda
Vice-Chairman of the Board: Frank Michael Kuhnt
Member of the Board: Bc. Romana Špačková, MBA
Development,production and sale of industrial sewing machines. Wide range of single or twin
needle lockstitch for stitching operation in the shoe, leather goods and textile production. Post
bed, flat bed, cylinder arm sewing machines and flat bed zigzag sewing machines.
Classification of activities: 28.00.0, 28.51.0, 29.00.0, 29.54.0
Annual sales:
754 mil. CZK
Employees:
591
Sokolská 60
680 17 Boskovice
Phone:
Fax:
e-mail:
20
www.minerva-boskovice.com
+420 516 494 295
+420 516 452 047
hrdaf@minerva-boskovice.com
www.electroindustry.cz
M-P
mivvy a.s.
www.mivvy.eu; www.mivvyenergy.eu
Classification of activities: 31.50.0, 30.00.0
Annual sales:
N/A
Employees:
10
Chairman of the Board: Michal Šlajs
Member of the Board: Ing. Vít Roubal
Poděbradova 362/4
301 00 Plzeň
hone:
P
Fax:
e -mail:
www.ntm.cz
National Technical Museum
The National Technical Museum with its assortment of 58 000 three-dimensional exhibits, ranks
among the oldest and the largest technical museums in the world. The collections include such
unique objects as astronomical instruments from the 16th century used by Tycho Brahe, the first
automobile produced in the Czech lands, some of the oldest daguerrotypies in the world and many
other unique items. In its permanent exhibitions the museum houses collections from the fields
of Transport, Mining, Architecture, Astronomy, Photography and Cinema, Printing, Technology in
Everyday Life, Story of the National Technical Museum and Motor Engines. The collections also
encompass a large archive of history of technology and industry and the library with about 250
000 books. Since the Museum´s reopening in February 2011, after a long-range reconstruction,
five permanent exhibitions have been opened up to the public: Transport, Architecture, Civil
Engineering and Industrial Design, Astronomy, Printing and Photographic Studio.
Classification of activities: 22.00.0, 22.11.1, 73.00.0, 93.00.0
Annual sales:
N/A
Employees:
133
General Director: Bc. Karel Ksandr
Deputy Director General for the Museum’s
Operation, Building and Investments:
Mgr. Miloš Josefovič
Deputy Director General for Central Collectioncreating Activities: PhDr. Jan Novotný
Kostelní 42
170 78 Praha 7
hone:
P
Fax:
e -mail:
+420 220 399 101, 220 399 241
+420 220 399 200
firstname.surname@ntm.cz
OEZ s.r.o.
www.oez.cz
For seven decades the company OEZ has evolved from a producer of circuit breakers and fuses to
become an integrated supplier of products and services for rotecting electrical circuits and lowvoltage devices. Since 2007 OEZ has been a member of the group Siemens. OEZ´s products have
been in use in power engineering, industry, the infrastructure as well as in housing development.
The company´s delivery programme focuses on: Modular devices Minia, Moulded case circuit
breakers Modeion, Moulded air circuit breakers Arion up to 6300A, Fuse systems Varius,
Enclosures Distri and Devices for switching and control Conteo.
Classification of activities: 28.00.0, 28.62.0, 31.20.0, 31.20.1, 31.20.2, 31.20.4
Annual sales:
N/A
Employees:
1 400
General Director (CEO): Ing. Roman Schiffer
Financial Director (CFO): Markus Tappert
Sales Director: Ing. Radim Adamec
Šedivská 339
561 51 Letohrad
hone:
P
Fax:
e -mail:
www.pavccz.panasonic.cz
+420 910 800 900, 910 807 708
+420 377 322 905
businessinfo@mivvy.eu
+420 465 672 301, 465 672 101
+420 465 672 330
oez.cz@oez.com
Panasonic AVC Networks Czech, s.r.o.
Panasonic AVC Networks Czech, s.r.o.(PAVCCZ) is a subsidiary company of Panasonic Corporation - manufacturer of branded products Panasonic. This company using hi-tech production technology is a plant of Panasonic concern manufacturing PDP and LCD TV sets in Europe. PAVCCZ
manufacturing color TV sets of Panasonic brand was awarded by SEMKO, BEAB, ISO 9002, ISO
14001, ISO 27001 and ISO 9001:2000 certificates.
Classification of activities: 30.00.0, 32.30.2, 32.30.3, 32.30.5
Annual sales:
39 200 mil. CZK
Employees:
2000
Managing Director: Makoto Takahashi
U Panasoniku 1068/1
320 84 Plzeň
hone:
P
Fax:
e-mail:
www.electroindustry.cz
+420 377 415 102, 377 415 111
+420 377 415 128
zdenek.netrebsky@eu.panasonic.com
21
P-S
PIKE AUTOMATION spol. s r.o.
President: Ing. Josef Fišer
Vice President & CEO: Ing. Jan Knobloch
Jeseniova 52
130 00 Praha 3
Phone:
Fax:
e-mail:
+420 271 000 700
+420 271 000 799
jknobloch@pikeautomation.cz
PIKE AUTOMATION division of Process Automation having long-time experience with the
development, testing and commissioning of extensive projects in the field of Process Automation
all around the world. There have been developed projects in metallurgy, food, material handling
and other branches of industry.
We offer complex solutions from the Basic Automation to the top management and planning
systems, integrated production quality systems, metallurgical and rolling mathematical models,
real-time systems running 24 hours a day, 365 days a year with permanent remote support. PIKE
is proud to present the Process Automation reference list to prove its rich history of ultimate
competences.
PIKE AUTOMATION is independent solution vendor. This ensures that our clients get the most
technically suitable, flexible and cost-effective system for the project.
Classification of activities: 33.30.0, 33.30.1, 31.20.3, 72.20.2, 72.20.3, 51.10.0, 73.00.0
Annual sales:
N/A
Employees:
N/A
PROSPEKSA, a.s.
Director and Chairman of the Board:
Ing. Pavel Prior
Neklanova 152/44
128 00 Praha 2, Vyšehrad
Phone:
Fax:
e-mail:
+420 251 562 559
+420 224 910 383
prior@prospeksa.cz
www.prospeksa.cz
PROSPEKSA, Inc. is a member of the Czech and Moravian Commodity stock exchange Kladno where it
acts as a broker for the following commodities sectors:
- wood stock
- standard industry commodities
- waste and secondary raw materials
- Energy Exchange (electric energy, natural gas)
- standard agricultural commodities.
At the same time PROSPEKSA, Inc. operates as an expert company in the field of the system integration
within those sectors. The Czech and Moravian Commodity Exchange Kladno (www.cmkbk.cz) was set
up in 1995 in accordance with Act No. 229/92 on commodity stock exchanges, pursuant to a state
licence granted by the Ministry of Industry and Trade and the Ministry of Agriculture.
Classification of activities: 65.21.0, 74.14.0, 93.00.0
Annual sales:
N/A
Employees:
4
RCD Radiokomunikace spol. s r.o.
CEO Executive: Ing. Tomáš Hála
COO Executive: Ing. Karel Páral
Technical Director: Ing. Břetislav Sova
www.pikeautomation.cz
www.rcd.cz
Research, development and production of radiocomunication equipments in frequency band 40
MHz - 8 GHz.
Design, project documentation, installation and service of radio networks. Integration of radio
and safety systems for Critical Infrastructure Protection.
Classification of activities: 32.20.1, 32.20.9
Annual sales:
191 mil. CZK
Employees:
87
Staré Hradiště č. p. 26
533 52 Staré Hradiště
Phone:
Fax:
e-mail:
+420 466 415 755, 602 482 499
+420 466 415 376
marketing@rcd.cz
SAFINA, a.s.
General Director: Ing. Tomáš Plachý, MBA
Vice-Chairman of the Board:
Ing. Jan Mengler, CSc.
Vídeňská 104
252 42 Jesenice, Vestec
Phone:
Fax:
e-mail:
22
+420 241 024 111
+420 241 024 268
info@safina.cz
www.safina.cz
SAFINA is a company with a comprehensive manufacturing program of processing and production of precious and nonferrous metals products, including their recycling. It has important,
direct or indirect, capital participation in other companies with reciprocally integrated manufacturing programs, in effect formong the strong SAFINA Group.
Basic production schedules: Industrial applications, Platinum, Targets, Chemistry, Fastening materials, Jewelry semiproducts, Jewelry, Dental materials, Recycling. Our accredited testing and
calibration laboratories guarantee reliable control over quality of materials and products.
Quality management Since 1996 we have implemented a quality management system according
to the ISO 9001:2000 standard. Ecology - we enforce the ISO 14 001:2004 standard since the
year 2002.
Classification of activities: 28.00.0.
Annual sales:
N/A
Employees:
200
www.electroindustry.cz
S
www.stech.cz
Sdělovací technika, spol. s r.o.
Publishing house with DTP facility. Publisher of journal SDELOVACI TECHNIKA (Communication
Technology) and other literature for professionals from the sectors of electronics, telecommunications and medicine. Sdelovaci technika, spol. s r.o. is also an organizer of technical conferences
and experts meetings. Journal SDELOVACI TECHNIKA is one of the most traditional technical
journals in the Czech Republic with 50-year history, that concerns electronic industry and telecommunications.
Classification of activities: 22.00.0, 22.11.1, 74.14.1, 74.40.0, 93.00.0
Annual sales:
8 mil. CZK
Employees:
8
Director: RNDr. Petr Beneš
Uhříněveská 40
100 00 Praha 10
hone:
P
Fax:
e -mail:
www.schmitt-praha.cz
+420 274 819 625, 274 816 490
+420 274 816 490
redakce@stech.cz
Schmitt & Schmitt s.r.o.
Tax consulting. Tax assessment. Attorney in finances and tax official procedures. Finance management consulting. Investment strategies consulting, personal investment planing. Consulting
in accountancy. Keeping books, payroll administration, balance assessment. Management and
support of statutory files of client companies.
Classification of activities: 74.14.0, 93.00.0
Annual sales:
4 mil. CZK
Employees:
6
CEO: Ing. Jiří Kohout
U Krčské vodárny 20a
140 00 Praha 4
hone:
P
Fax:
e -mail:
Siemens Group CZ
www.siemens.cz
Siemens is a global powerhouse in electrical engineering and electronics. The company has
around 405,000 employees working to develop and manufacture products, design and install
complex systems and projects, and tailor a wide range of services for individual requirements.
Siemens provides innovative technologies and comprehensive know-how to benefit customers
in 190 countries. Siemens had sales from continuing operations of €75.978 billion and net income
of €4.112 billion. Siemens resumed its subsidiary in the Czech Republic in 1990. As of, there are
10,900 employees in 8 companies associated within Siemens Czech Republic. In the fiscal year
2010/2011, the Siemens Group in the Czech Republic reported turnover CZK 32bn. The key
segments of Siemens’ activities in the Czech Republic include Automation and Control, Transportation, Energy, Lighting and Healthcare.
Classification of activities: 31.20.4, 31.20.9, 32.10.0, 32.30.5, 32.20.0, 72.20.2, 33.20.4, 33.20.8,
72.30.2, 72.60.1
Annual sales:
32 mld. CZK
Employees:
10 900
siemens.cz/plm
+420 234 036 230, 234 036 233
+420 234 036 232
kohout@schmitt-praha.cz
Chief Executive Officer:
Ing. Eduard Palíšek, Ph.D., MBA
Chief Financial Officer: Dip.Kfm. Rudolf Fischer
Siemensova 1
155 00 Praha-Stodůlky
Phone:
Fax:
e -mail:
+420 233 033 303
+420 233 031 112
siemens.cz@siemens.com
Siemens Industry Software, s.r.o.
Siemens PLM Software is a business unit of Siemens and a leading global provider of product
lifecycle management (PLM) software and services with 6,3 million licensed seats and 63,000
customers worldwide. PLM is an information strategy, an enterprise strategy and ultimately a
transformational business strategy. Siemens PLM Software sees it as a comprehensive approach
to innovation built on enterprise-wide access to a common repository of product information
and processes.
Products, services and solutions“: • NX - a next-generation CAD/CAM/CAE solution that powers
innovation through digital product development; • Velocity Series - a comprehensive family of
modular, yet integrated solutions addressing the product lifecycle management (PLM) needs
of the mid-market. • Teamcenter - powers innovation and productivity; • Tecnomatix - suite of
bestin- class digital manufacturing applications and production expertise.
Managing Director: Tomáš Svoboda
Marketing Manager: Eva Urbánková
Na Maninách 7
170 00 Praha 7
Phone:
Fax:
e -mail:
Classification of activities: 72.20.2, 72.20.3
Annual sales:
112 mil. CZK
Employees:
25
www.electroindustry.cz
+420 266 790 411
+420 266 790 422
infocz.plm@siemens.com
23
S-T
SYSGO s.r.o.
CEO: Jan Rollo
Zelený pruh 99
140 00 Praha 4
Phone:
Fax:
e-mail:
+420 222 138 111
+420 296 374 890
prague@sysgo.com
www.sysgo.com
SYSGO provides operating system technology, middleware, and software services for the real-time and embedded market. A differentiating capability of SYSGO is the Safe and Secure Virtualization platform PikeOS, a paravirtualization operating system which is built upon a small,
fast, and safe micro kernel. It supports the co-existence of independent operating system personalities on a single platform, including ELinOS, SYSGO’s embedded Linux distribution. PikeOS
has been designed for use in safety-critical applications and has gone through a comprehensive
validation according to safety standards like DO-178B, EN 50128, IEC 62304, IEC 61508, ISO
26262, IEC 61513 of either the avionics, automotive, railway, medical, industrial automation or
nuclear power plants. SYSGO supports international customers with services for embedded
Linux, real-time capabilities and certification for safety-critical applications.
Classification of activities: 73.00.0, 74.30.0, 72.20.3, 72.20.2
Annual sales:
13,1 mil. CZK
Employees:
13
Systems Consulting s.r.o.
Consulting and advisory activities.
Classification of activities: 72.20.3, 93.00.0
Annual sales:
4, 9 mil. CZK
Employees:
5
Director: Otakar Chasák
Na Hejtmánce 169
239 01 Mladá Boleslav III
Phone:
Fax:
e-mail:
+420 323 603 329
+420 323 601 827
systems-consulting@email.cz
TES VSETÍN s.r.o.
Chairman of the Board and CEO: Ing. David Bečvář
Marketing and Sales Director: Ing. Lukáš Konečný
Jiráskova 691
755 01 Vsetín
Phone:
Fax:
e-mail:
+420 571 812 500, 571 812 530
+420 571 413 200
info@tes.cz
www.tes.cz
Design and production: synchronous generators for small hydro-power plants and dieselsets 30 –
15 000 kVA, asynchronous generators for small hydro-power plants 30–1500 kW, PMG´s for wind
turbines 500 – 3300 kVA, DFIG´s for wind turbines 500–3300 kW, PM motors 100 – 3000 kW, special asynchronous mill-motors 5–1500 kW, DC mill-motors 3 – 1000 kW, DC motors for general use
20 – 550 kW, induction voltage regulators 27 – 1400 kVA/0 – 800 V, rotating frequency converters
50/60 Hz, parts of electric machines: laminations, weldments, machining, winding.
Extreme high quality, long life, custom made products. Certified according to ISO 9001, ISO 14001,
welding acc. to ISO EN 3834-2. Parameters of our machines are acc. to IEC standards or AISE
recommendation. Tradition since 1919, exports of 70 % to whole the world.
Classification of activities: 28.52.0, 28.62.0, 29.00.0, 31.10.0, 31.10.1, 31.10.2, 31.10.3, 31.10.6,
31.10.9, 31.62.9
Annual sales:
1 100 mil.CZK
Employees:
500
TESLA Holding a.s.
C.E.O.: Mgr. Robert Němec
Finance Director: Pavel Birner
Poděbradská 56/186
180 66 Praha 9 - Hloubětín
Phone:
Fax:
e-mail:
24
www.tesla.cz
A producer and supplier of TV and broadcast transmitters, antenna systems, radio-relay equipment, mobile water treatment plants, off-road water treatment plants and filling lines; solar
technology, solar power stations, solar energy; engineering production - parts and components
(CNC), welding, grinding, measurement; external assembly of radiocommunication and security
equipment; electronic military production; high standard of quality, TESLA trademark, certification according to ISO 9001/2000, 9001-2008, 14001-2004.
Classification of activities: 28.52.0, 32.20.9, 29.00.0, 31.62.9, 32.10.3, 32.201., 51.10.0, 73.00.0
Annual sales:
438 mil. CZK
Employees:
200
+420 266 107 111
+420 266 107 446
info@tesla.cz
www.electroindustry.cz
T-V
www.tesla.cz
TESLA Mladá Vožice a.s.
The TESLA Mladá Vožice is a traditional and long-standing supplier of semi-finished and finished
products for the Czech and foreign market. The division disposes of a new production hall with
the contemporary mechanical equipment which is located in Mladá Vožice. Its key production
programmes are cutting machining and processing of sheet metal. In cutting machining besides
steel working, it specialises in working of aluminium, non-ferrous metals, insulation materials
and plastics. Other production follows up on this programme and provides our customers with
complex services including surface finishes. During its period of activity the division has become
a reliable partner in its field.
Classification of activities: 29.00.0, 31.62.9, 32.20.9
Annual sales:
N/A
Employees:
99
Táborská 445
391 43 Mladá Vožice
hone:
P
Fax:
e -mail:
+420 266 107 123, 381 214 110
+420 266 107 152
sv@tesla.cz
UniControls a.s.
www.unicontrols.cz
UniControls focuses on design and complete supplies of industrial and transport control systems
especially for demanding conditions (transport, gas and water industry, power engineering, etc.)
system integration of communication, control, information and diagnostic systems for rolling
stock both new and modernized, design and supplies of complete electronic equipment for
rolling stock, dispatching control systems, R&D and customized solutions.
Certified quality system according to ISO 9001:2001, environmetal management system ISO
14001, IRIS certificate and technical approval certificate (Czech Railways). The company is active
on many international markets (Canada, Russia, China, Japan, European countries) and co-operates with global companies. UniControls is a member of UNIFE, CiA (CAN in Automation) and
many other international and national organisations.
Classification of activities: 33.20.7, 33.20.8, 33.20.9, 33.30.0, 33.30.1
Annual sales:
500 mil. CZK
Employees:
160
www.uvr.cz
Chairman of the Board: Ing. Renáta Francová
Member of the Board: Ing. František Hála
Director: Ing. Pavel Frána
Managing Director: Ing. Miloslav Adam
Technical Director: Ing. Antonín Felber
Financial Director: Ing. Antoním Wzatek
Křenická 2257
100 00 Praha 10
hone:
P
Fax:
e -mail:
+420 272 011 411, 272 011 478
+420 272 011 488
unic@unicontrols.cz
UVR Mníšek pod Brdy a.s.
The company is engaged in telecommunications technology, research, development and innovation in the field of industrial waste technological, including space debris. We cooperate with
universities, research institutes, and private entities in the industry.
Classification of activities: 73.00.0, 74.30.0, 93.00.0
Annual sales:
43 mil. CZK
Employees:
49
Chairman of the Board: Daniel Kraft
ÚVR Mníšek pod Brdy 600
252 10 Mníšek pod Brdy
hone:
P
Fax: e -mail:
+420 318 592 671, 318 592 672
+420 318 592 327
uvr@uvr.cz
Veletrhy Brno, a.s.
www.bvv.cz
BVV Trade Fairs Brno Co. is the largest and the most important trade fair management in the
Czech Republic, taking up 62% ratio of the exhibiting space rented out on the Czech trade fairs
market. The company dominates in the field of international events as well – it organizes 76% of
all international trade fairs in the Czech Republic, has the ratio of foreign exhibitors that takes up
70% of the Czech trade fair market, and moreover, 91% of all foreign visitors to see a trade fair
in the Czech come to BVV Trade Fairs Brno.
Note: The aforementioned data relate to Czech audited market. As foreign visitors and exhibitors
are not considered in a non-audited market, it is impossible to compare.
Classification of activities: 70.20.0, 93.00.0, 51.10.0, 72.00.0, 74.40.0, 72.40.1
Annual sales:
1 095,5 mil. CZK
Employees:
387
www.electroindustry.cz
General Manager: Jiří Kuliš
Deputy Manager: Norbert M. Schmidt
Project Team MSV: Jiří Rousek
Výstaviště 1
647 00 Brno
hone:
P
Fax:
e -mail:
+420 541 152 926
+420 541 153 044
msv@bvv.cz
25
V-Z
VUES Brno s.r.o.
General Director: Ing. Jiří Havelka
Mostecká 992/26
657 65 Brno
Phone:
Fax:
e-mail:
+420 545 551 102, 545 551 111
+420 545 551 222
mail@vues.cz
www.vues.cz
Design and production of tailor –made (non-standard) AC rotating electric machines, electric drives
and loading test stands with dynamometers, according to the customer specifications. Custom
build AC electric machines and drives. Permanent magnet synchronous servomotors and motors
with high dynamics and accuracy. Synchronous and induction linear motors. Electric dynamometers and test stands. Low-speed and high-speed electric motors. Synchronous and induction generators build to demand. Electric traction motors and generators.Aircraft technology board generators and electric starters. Power supply sets and rotating power sources. Certification tests with
international validity. Accredited test field. Design and verification consulting. VUES Brno s.r.o. has
implemented the quality system according to EN ISO 9001, and the environmental management
system according to EN ISO 14001.
Classification of activities: 22.00.0, 73.00.0, 74.30.0, 31.10.0, 31.10.3, 31.10.6, 31.10.9, 93.00.0
Annual sales:
490 mil. CZK
Employees:
450
VUVL a.s.
www.vuvl.cz
Manufacture of bearings, including special bearings.
Classification of activities: 28.00.0, 28.52.0
Annual sales:
60 mil. CZK
Employees:
107
General Director: Valentin Girstl
Blanenská 257
664 34 Kuřim
Phone:
e-mail:
+420 541 103 855
vkgirstl@vuvl.cz
ZPA Brno, spol. s r. o.
www.zpabrno.cz
Products: Analog devices for revision of electronic equipment with accessories,open-air products
with solar cells, electronic safety systems – handling boxes, control units, sirens with or without
hazard beacon.Services: calibration of meters to 1 000 V.
Classification of activities: 228.00.0, 33.20.0, 33.20.4, 33.20.7, 33.20.9, 33.30.0, 33.30.1,
70.20.0, 73.00.0, 93.00.0
Annual sales:
34 mil. CZK
Employees:
49
Director: Ing. Ervín Skříšovský
Palackého tř. 158
612 44 Brno
Phone:
Fax:
e-mail:
+420 541 639 210, 541 639 111
+420 541 211 197
all@zpabrno.cz
ZPA Smart Energy a.s.
General Director: Ing. Zdeněk Stuchlík
Komenského 821
541 01 Trutnov
Phone:
e-mail:
26
+420 499 907 111, 499 907 497
zpa@zpa.cz
www.zpa.cz
Production and distribution of the mass remote-control receivers and the devices for their testing. Production and distribution of the single-phase and three-phase electronic electricity meters with the mechanical counters or with the display, with possibility to inbuild module of the
mass remote-control receiver or module for remote reading of consumed energy. Design and
applications of the systems for remote data collection and transmission. Production and distribution of the devices for automation, programmable failure signalling and the terminal blocks for
testing of current circuits. ZPA Smart Energy s.r.o. has had EN ISO 9001:2001, EN ISO 14 001:2005
and CQS certificate.
Classification of activities: .20.0, 31.20.1, 31.20.4, 32.10.0, 32.10.3, 33.20.0, 33.20.4, 33.20.6,
33.20.7, 33.20.8
Annual sales:
182 mil. CZK
Employees:
165
www.electroindustry.cz
Classification of activities:
Numbers
Description
Numbers
22.00.0 Publishing, printing and recording
22.11.1 Book publishing
25.00.0 Production of goods of plastic materials
26.00.0 Production of non-metal products
28.00.0 Production of metal products
28.22.0 Production of heating radiators and central heating boilers
28.40.0 Forging, pressing stamping, embossing, rolling of metals; p owder metallurgy
28.51.0 Surface treatment of metals (varnishing, galvanising)
28.52.0 Mechanical metal processing (turning, milling, grinding)
28.62.0 Tool production
29.00.0 Machine and equipment production
29.54.0 Production of machines for the textiles industry
29.70.0 Production of house appliances
30.00.0 Production of office machines and computers
30.01.1 Typewriters, calculating machines and their components
30.01.2 Photocopiers, offset printing machines
and their components
30.01.9 Installation and mounting of office machines
and instruments
30.02.1 Computers, data processing machines
and their components
30.02.9 Installation and mounting of computers
and data processing equipment
31.10.0 Production of electric motors, generators
a nd transformers
31.10.1 Electric motors under 37.5 W, other d.c. motors, dynamos
31.10.2 Universal motors under 37.5 W, a.c. motors, alternators
31.10.3 Electric generator aggregates and rotary converters
31.10.4 Electric transformers
31.10.5 Resistors for discharge lamps and discharge tubes,
s tatic converters, inductors
31.10.6 Electric motor, generator and transformer components
31.10 9 Installation, repairs and rewinding of electric motors, generators and transformers
31.20.0 Production of electric distribution
a nd switching equipment
31.20.1 Electric distribution and switching equipment
(up to 1000 V)
31.20.2 Instruments for switching off and protecting
electric circuits for 1000 and more V
31.20.3 Distributors, distributing panels
31.20.4 Components for electricity distributing
and inspection equipment
31.20.9 Installation and repairs of electricity
distributing equipment
31.30.0 Production of cables and conductors
31.30.1 Cables and insulated conductors, optical fibre cables
31.40.0 Accumulator, primary element and battery production
31.40.1 Galvanic element and battery production
31.40.2 Electric accumulators
31.50.0 Production of electric light sources and accessories
31.61.0 Production of electric equipment for machines
a nd vehicles
31.61.1 Sets of ignition cables and wires for motorcars
31.61.2 Other electric equipment for machines and vehicles,
t heir components
31.62.0 Production of other electric equipment
31.62.1 Other electric equipment and its components
31.62.9 Installation, repairs and maintenance
of other electric equipment
32.10.0 Production of electronic elements, valves
32.10.1 Electric capacitors
32.10.2 Electric resistors
32.10.3 Printed circuits, manually complemented PCs
or PCs with surface mounted elements
32.10.4 Electron valves and cathode tubes
32.10.5 Diodes and transistors
32.10.6 Combined microelectronics elements
32.10.7
32.20.0
32.20.1
32.20.2 32.20.3
32.20.9 32.30.0
32.30.1
32.30.2
32.30.3
32.30.4
32.30.5
32.30.9
33.10.0
33.10.1 33.10.2
33.10.9
33.20.0
33.20.1
33.20.2
33.20.3
33.20.4 33.20.5 33.20.6 33.20.7 33.20.8 33.20.9 33.30.0
33.30.1 51.10.0
51.70.0
52.00.0
63.00.0
65.21.0
70.20.0
71.00.0
72.00.0
72.10.1
72.20.1
72.20.2
72.20.3
72.30.1
72.30.2 72.40.1
72.50.1
72.60.1
73.00.0
74.14.0
74.14.1
74.20.1
74.30.0
74.40.0
93.00.0
Description
Electron valve, tubes and other electronic components
Production of radio and TV transmitters
Radio and TV transmitting instruments, TV cameras
Electric instruments for cable telephony and telegraphy
Components of electric telephone
or teleprinter instruments
Installation and maintenance of telecommunication
equipment
Production of radio and TV receivers
Radio receivers
TV receivers
Instruments for sound and picture recording
and reproducing
Microphones, loudspeakers, headphones
and lecturing systems
Components and accessories for instruments
Installation and maintenance of radio and TV instruments
Production of medical and surgeons’ instruments
Medical and surgeons’ instruments
Doctors’, surgeons’, dentists’ and veterinarians’ furniture
Installation, repairs and maintenance
of medical and surgeons’ equipment
Production of measuring, inspection
and navigation instruments
Navigation, meteorological
and geophysical tools and instruments
Radiolocation and radionavigation instruments
Accurate balances, drawing and drafting tools
and instruments
Tools and instruments for measuring electric quantities
Tools and instruments for inspecting other
physical properties
Other measuring, inspection and testing tools
and instruments
Automatic regulating and inspection instruments and tools
Components and accessories for measuring,
inspection and testing
Installation and repairs of measuring
and inspection instruments
Production of equipment for industrial process control
Projecting and assembling of industrial process
control equipment
Trade mediation
Other wholesale
Retail sale, repair of consumer goods
Related and auxiliary activities in conveyance and storing
Leasing connected with financing
Lease of own estates
Lease of machines, instruments and goods
for personal use
Data processing and related activities
Consulting for installation of computer hardware
Magnetic media with data for data processing machines
Services connected with software delivery
Consulting for software
Management of activities in the field of data
processing for other subjects
Services connected with complete processing
delivered data
Services connected with data bank activities
Services connected with office machine maintenance
Other services connected with computer operation
Research and development
Business consulting
Consulting in telecommunication and postal services
Architects’ and engineering services including design
Technical testing, measuring, analyses
Publicity activities
Other services
www.electroindustry.cz
27
PUBLIC LIGHTING CONTROLS
ERYX SOLUTION
The Rremote Ssystem for Managing
Public Lighting
● Improve lighting reliability
● Increase citizen satisfaction
● Rredduce crime
● Decrease energy and
maintenance costs
● Program to astronomical
variations in sunset/sunrise
ZPA Smart Energy a.s., Komenského 821, 541 01 Trutnov, Czech Republic
Phone: +420 499 907 111, Fax: +420 499 907 497, E-mail: zpa@zpa.cz, www.zpa.cz
Advanced Metering
Infrastructure (AMI, AMM)
Accurate, Reliable & Robust
AMI Solutions
• Manage Peak Load
• Improve Customer Service
• Improve Meter Reading Efficiencies
• Detect & Verify Outages
ZPA Smart Energy a.s., Komenského 821, 541 01 Trutnov, Czech Republic
Phone: +420 499 907 111, Fax: +420 499 907 497, E-mail: zpa@zpa.cz, www.zpa.cz
Českomoravská elektrotechnická asociace, partner Veletrhy Brno a.s.
Expozice Českomoravské elektrotechnické asociace
na 52. mezinárodním strojírenském veletrhu v Brně.
Historické exponáty zapůjčily Národní technické muzeum v Praze a společnost Amest s.r.o.
MSV 2010
MSV 2010
NATIONAL TECHNICAL MUSEUM
Member of the Czech and Moravian Electrical and Electronic Association
The National Technical Museum – established in 1908 –
is the greatest Czech institution specialized in technical
museum exhibits of both domestic and foreign origin.
Electrical engineering has been represented in the
Museum since its beginnings. The collections number
more than twenty thousand specimens. Among
them are unique objects, connected with prominent
personalities of Czech and Moravian electrical
engineering, such as F. A. Petřina, F. Křižík, E. Kolben,
E. Roučka, and others.
The historical collection fund is permanently completed
with products of contemporary technology.
30
www.electroindustry.cz
At present, the Museum is inviting the
public to see five unique expositions:
• Exposition of Transport
• Exposition of Architecture, Civil
Engineering and Design
• Exposition of Astronomy
• Exposition of Printing
• Exposition Photographic Studio
National Technical Museum
Kostelní 42, 170 78 Prague 7
www.ntm.cz
Open daily 10am – 18pm, besides Monday
s
g
e
n
n
i
i
r
h
u
t
c
c
a
a
m
f
u
c
i
n tr
a
m lec
d
n of e
a
gn
si
e
D
.
.
s.
t
c
je
t
r
o
p
e
w
r
u
yo
o
r
p
p
su
z
c
s.
w
w
w
e
u
.v
Cities that consume 30% less energy?
As a leading producer of energy-efficient solutions, ABB helps deliver
major power savings, without compromising performance. Our lighting
control systems can deliver power savings of up to 50 percent, and our
building automation up to 60 percent. While everyone else is talking about
energy prices, power shortages and climate change, ABB is doing something
about it, right here, right now. www.abb.com/betterworld
www.abb.com
Certainly.