International conference
POLYMER COMPOSITES
2011
April 27 – 28, 2011
Plzeň, Czech Republic
INVITATION AND PROGRAMME
Exclusive media partner
under the auspices of rector of the University of West Bohemia
doc. PaedDr. Ilona Mauritzová, Ph.D.
SYNPO a.s.
SUB BRANCH MECHANICS OF COMPOSITE MATERIALS AND
STRUCTURES OF CZECH MECH
MECHANICS
CHANICS SOCIETY PRAHA
CZECH TEC
TECHNOLOGY PLATFORM
- AEROSPACE
EUROPEAN UNION
EUROPEAN REGIONAL DEVELOPMENT FUND
INVESTMENT IN YOUR FUTURE
This project is cofinanced European regional development fund and the Ministry of Industry and Trade
of the Czech Republic - investment in your future
International conference
POLYMER COMPOSITES 2011
April 27 - 28, 2011
Plzeň, Czech Republic
Teslova 3, Plzeň Science and Technology Park
ORGANIZATION AND PROGRAMME COMMITTEE:
Committee members:
Petr Martinec, New Technology – Research Centre, University of West Bohemia
Bronislav Foller, New Technology – Research Centre, University of West
Bohemia
Petra Pechmanová, New Technology – Research, University of West Bohemia
Eva Nezbedová, Polymer Institute Brno
František Socha, SYNPO, a.s., Pardubice
Vilém Pompe, Aeronautical Research and Test Institute, Prague
Josef Křena, LETOV LETECKÁ VÝROBA, Ltd. Prague
Jan Orlt, consultant – composites, Prague
Conference secretariat address:
Petra Pechmanová
New Technology-Research Centre
University of West Bohemia
Univerzitní 8, 306 14 Plzeň
Phone: +420 377 634 736
Fax:
+420 377 634 702
E-mail: pct@ntc.zcu.cz
http://
www.zcu.cz/ntc.zcu.cz
The aim of the Conference is to enable specialists from research and
industry to present actual knowledge and trends in research and
development, analyses, materials, technology, manufacturing and
applications of composite materials.
CONFERENCE PROGRAMME
Wednesday, April 27, 2011
8.00 – 9.30
9.30
Registration, exhibition area set-up
Opening and welcome
PLENARY LECTURES
Swelling and mechanical properties of particulate composites with matrix in
rubbers state
Dušek K1., Dušková-Smrčková M1., Šomvárský J2., Nezbedová E3., Náhlík L4.
1
Institute of Macromolecular Chemistry Academy of Science of the Czech Republic, Prague
2
Department of Macromolecular Physics, MFF Charles University in Prague
3
Polymer Institute Brno, Czech Republic
4
Institute of Physics of Materials Academy of Science of the Czech Republic, Brno
History and present trends of composites in Czech/Slovak aircraft industry
Štekner B., VZLÚ a.s., Prague, Czech Republic
11.15 – 11.30 C o f f e e b r e a k
11.30 – 13.00 Section ANALYSIS AND DESIGN
Chairmen: Josef Křena, Jaroslav Padovec
Stress analysis of horizontal composite vessel reinforced by the rib above
saddle support
Padovec J., Consulting, Strength of plastic and composite structures, Prague, Czech
Republic
Composite cylinder buckling simulation
Mališ M., Aircraft Institute, VUT Brno, Czech Republic
Experimental programme of testing sandwiches for design applications
in mass transport
Padovec Z., Doubrava K., Růžička M., CTU Faculty of mechanical engineering in Prague,
Czech Republic
13.00 – 14.30 L u n ch b r e a k
14.30 – 17.00 Section TECHNOLOGY AND APPLICATION
Chairmen: Bronislav Foller, Jan Orlt
New view on recycling of carbon fibres reinforced composites
Mašek Z., Aeronautical Research and Test Institute, Prague, Czech Republic
6Sigma, another motive for structural bonding
Mayer Ch., Mayer & Mayer GmbH, Graz, Austria
Mechanical and electrical joining of function-integrative textile-reinforced
thermoplastic composites
Hufenbach W.A., Adam F., Winkler A., Heber T., Körner I., Kupfer R.,Technische Universität
Dresden, Institute of Lightweight Engineering and Polymer Technology, Germany
New trends of pipe system HOBAS®
Machynka J., HOBAS CZ, Uherské Hradiště, Czech Republic
Coffee break
Resin Transfer moulding – RTM light vs. RTM
Doll A., Wolfangel GmbH, Ditzingen-Heimerdingen, Germany
Practical demonstration of both technologies after the lecture
17.15 Transfer to Bohemia Sekt Center - bus available
18.00
Excursion in Bohemia Sekt plant with English guide, wine tasting
20.00
Evening party
Thursday, April 28, 2011
9.00 – 12.00 Section MATERIALS, PROPERTIES, TESTING
Chairman: Eva Nezbedová, František Socha
Temperature-dependent recording macroindentation techniques – fast
characterisation of the mechanical behaviour and time-dependent performance
of polymers and composites
Lach R.1,2, Schöne J.1, Arndt S.2, Bierögel Ch.2, Grellmann W.1,2
1
Polymer Service GmbH Merseburg, Germany
2
Martin-Luther University Halle-Wittemberg, Centre of Engineering, Germany
The first step to sustainable composites – unsaturated polyester resins
from renewable resources
Mannermaa T., Ashland Performance Materials, Porvoo, Finland
Use of PET scrap for structural composites – problems and prospects
Pospíšil L., Kučera J., Polymer Institute Brno, Czech Republic
Coffee break
New resin flow media for vacuum infusion
Ščerba M., Saertex GmbH, Czech Republic
Thermal analysis of polymer composites materials
Foller B., New Technology - Research Centre, University of West Bohemia, Czech Republic
12.00 – 12.45
L u n ch b r e a k
12.45 – 16.00 Section MATERIALS, PROPERTIES, TESTING
Chairman: Eva Nezbedová, František Socha
Mechanical properties of textile-reinforced thermoplastics with
integrated sensor networks
Hufenbach W.1, Adam F.1, Füßel R.1, Kunadt A.2, Weck D.1
1
Institute of Lightweight Engineering and Polymer Technology, TU Dresden, Germany
2
Institute of Semiconductor and Microsystems Technology, TU Dresden, Germany
Nano composite polymer produced from polypropylene and
nano cellulose whiskers
Ucar N.1, Bahar E.2, Oksuz M.5, Onen A.2, Wang Y.3, Ucar M.4, Ayaz O.1, Demir A.1
1
Istanbul Technical University, Textile Engineering Deparment, Gumussuyu, Taksim,
Istanbul, Turkey
2
Istanbul Technical University, Chemistry Department, Gumussuyu, Taksim, Istanbul
3
Georgia Insitute of Technology, Textile & Fiber Engineering, Atlanta, USA
4
Kocaeli Univesity, Mechanical Education Department, Izmit, Turkey
5
Yalova University, Polymer Engineering Department, Yalova, Turkey
Confined swelling of polymer-filled constructs
Dušková-Smrčková M.1, Šomvárský J.2, Dušek K.1
Institute of Macromolecular Chemistry Academy of Science of the Czech Republic, Prague
2
Department of Macromolecular Physics, MFF Charles University in Prague, Czech Republic
1
Application of reinforcing inorganic fillers for extruded PP products
Kučera J., Křivánek J., Pospíšil L., Polymer Institute Brno, Czech Republic
Composites based on wood – problems and prospects
Zbořilová P., Pospíšil L., Polymer Institute Brno, Czech Republic
16.00
Close of the conference
During the conference there is a possibility to discuss issues with the
authors of the poster section and review the technical literature and
samples of exhibiting companies.
Poster Section
Woven reinforcement visualisation and mechanical properties computation
Těšinová P., Technical University of Liberec, Faculty of Textile Engineering, Department of
Textile Evaluation, Liberec, Czech Republic
Some properties of starch filled epoxy
Bria V., Ungureanu V., Roman I., Madjar A., Bîrsan I.-G., Cîrciumaru A., Dunărea de Jos
University, GalaŃi, ROMÂNIA
Mechanical analysis of fabric reinforced epoxy laminates
Ungureanu V., Bria V., Roman I., Madjar A., Bîrsan I.-G., Cîrciumaru A., Dunărea de Jos
University, GalaŃi, ROMÂNIA
Electrical and thermal characterization of fabric laminates
Roman I., Ungureanu V., Madjar A., Bria V., Cîrciumaru A., Bîrsan I.-G., Dunărea de Jos
University, GalaŃi, ROMÂNIA
Imperfection of internal structure of polymer composites with nanofibers
reinforcement
Salačová J., Technical University of Liberec, Faculty of Textile Engineering, Liberec, Czech
Republic
The connection of selected technological parameters with properties of
composite material based on scrap tires and polymer binder
Plesuma R., Megne A., Mateusa-Krūkle I., Malers L., Institute of Polymer Materials, Riga
Technical University, Azenes str.14/24, LV – 1048, Riga, Latvia
Some mechanical properties of natural fibres polypropylene, polylactide
composites
Nestore O., Kajaks J., Reihmane S., Institute of Polymer Materials, Riga Technical
University, Azenes str.14/24, LV-1048 Riga, Latvia
Structural, mechanical properties of liquid crystal and montmorillonite moieties
containing polymer blends
Elksnite I.1, Zicans J.1, Kokars V.2, Traskovskis K.2, Kalnins M.1
1
Institute of Polymer materials, Riga Technical University, Azenes str. 14/24, Riga LV-1048,
Latvia
2
Department of chemistry, Riga Technical University, Azenes str. 14/24, Riga LV-1048,
Latvia
ORGANIZATION HINTS
Place and date
Plzeň-Borská pole, Plzeň Science and Technology Park, Teslova 3,
GPS: 49°43´25.66´´ S 13°20´12.53´´ V
April 27-28th, 2011
Conference languages:
Czech and English. Simultaneous translation is provided.
Accommodation:
The accommodation will be reserved in Hotel Victoria (www.hotel-victoria.cz)
Single room use/night: 38EUR, double room use/night 55 EUR (breakfast included)
Participation fees:
The participation fee for a regular participant is 130 EUR
The participation fee includes:
• Conference proceedings
• Drinks and lunch during breaks
• Simultaneous translation
• Excursion in Bohemia Sekt and Evening party
We ask you to pay the participant fee on the account number:
SWIFT address: KOMBCZPPXXX
IBAN CZ0401000000004845500267
Bank Code: 0100
Detail of payment: 614002
Beneficiary: Zapadoceska univerzita v Plzni, Univerzitni 8, 306 14 Plzen, Czech
Republic
Bank transfer to:
Komercni banka, a. s.
Na Prikope 33 /cp 969,
114 07 Praha 1, Czech Republic
In case of single or multiple-payment, it is necessary to put details of payment
614002 and your name in the payment order.
In special case it is possible to pay the participation fee cash (CZK) by registration.