UF
LE
X
RENEWABLE
ENERGY
1935 - 2015
ULTRAFLEX
Ultraflex Group has 80 years of experience in manufacturing
Steering and control systems
for pleasure boats
and distributing the highest quality and most innovative products.
The Ultraflex Group affiliate Companies that design and produce widely
UFLEX
known equipments in the marine, industrial, architectural,
Led technology and alternative energy fields.
Worldwide distribution
of marine accessories
UFLEX - Renewable Energy
Systems and accessories
for alternative energy applications
®
ULTRAFLEX CONTROL SYSTEMS
Window and skylight remote controls.
Innovative LED road signs
INDUSTRIA di LEIVI
Mechanical remote controls
in the industrial field
UFLEX USA
Manufacturing the world’s finest
marine products
ULTRAFLEX - Factory in Casella
Quality Management System
The Ultraflex and Uflex Quality Management Systems are
certified CISQ-IQNet by the Italian Shipping Registry (RINA), in
conformity with the UNI EN ISO 9001 rule, certification n°
6669/02/S (former 420/96). Certification Uflex n° 8875/03/S.
The quality management system involves all the company
resources and processes starting from the design, in order to:
• Assure product quality to the customer
• Set up the actions to maintain and improve the quality
standards constantly
UCS - UFLEX - Stabilimento di Borgo Fornari
• Pursue a continuous process improvement to meet the market
needs
• Maintain and verify conformity with ABYC requirements.
The Ultraflex Environmental Management System is certified
CISQ-IQNet by the Italian Shipping Registry (RINA), in
conformity with the UNI EN ISO 14001. Ultraflex certification
n° EMS-1282/S.
Constantly test the products to verify their conformity with the
EEC 94/25 and ABYC (American Boat and Yacht Council)
requirements.
IL - Stabilimento di Leivi
UFLEX USA - Stabilimento di Sarasota
2015 - 2016 Edition
UF
LE
X
1
PV MODULES
SECTION 1
INDEX
Surana - multicrystalline PV modules
Uflex - semi-flexible PV modules
Xunzel - monocrystalline semi-flexible PV modules
Sunware - crystalline semi-flexible PV modules
Bisol - monocrystalline and multicrystalline PV modules
Uflex - supports for PV modules
Uflex - pole brackets for PV modules
Uflex - PV mounting system for flat roof
Uflex - PV modules supports for metal roofs
2
SECTION 2
3
Power
Power
Power
Power
Power
4
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
ELECTRICAL EQUIPMENT
Morningstar - charge controllers, inverters, ground fault protection, accessories
Studer - charge controllers, battery chargers, inverters
Uflex - inverters and battery chargers
Whisper Power - battery chargers, inverters, combi systems, battery monitors
Victron Energy - charge controllers, battery chargers, inverters
Victron Energy - combi systems, DC-DC converters, accessories
Sinergex - inverters and battery chargers
CBE - charge controllers
BEP Marine - battery distribution switches
BEP Marine - distribution systems
BEP Marine - battery switches and distribution components - PRO INSTALLER
Fronius - grid-connected inverters
ABB - grid-connected inverters
Whisper
Whisper
Whisper
Whisper
Whisper
PAG. 1.1 - 1.9
DIESEL GENERATORS
SECTION 3
-
combi systems, Wisper Power Centre
battery chargers and professional inverters
belt generators/alternators
variable speed diesel generators
fixed diesel generators
BATTERIES
SECTION 4
Whisper Power - AGM, GEL, LI-ION batteries
Victron Energy - AGM, GEL, LI-ION batteries
Victron Energy - BMS and battery balancer
Enerpower - AGM batteries
Uflex - battery container
PAG. 2.1 - 2.60
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
pag.
2.1 - 2.8
2.9 - 2.13
2.14 - 2.15
2.16 - 2.19
2.20 - 2.28
2.29 - 2.36
2.37 - 2.38
2.39
2.40 - 2.46
2.46 - 2.50
2.51 - 2.58
2.59
2.60
PAG. 3.1 - 3.13
pag.
pag.
pag.
pag.
pag.
3.1
3.4
3.5
3.7
3.9
- 3.3
- 3.6
- 3.8
- 3.13
PAG. 4.1 - 4.8
pag.
pag.
pag.
pag.
pag.
4.1 - 4.2
4.3 - 4.4
4.5 - 4.6
4.7
4.8
Ultraflex S.p.A. declines any liability for possible mistakes in this catalogue due to printing errors.
Ultraflex S.p.A. reserves the right to make those modifications that are considered to be suitable
for its products.
Publishing rights, trade marks, part numbers and photographs of the Ultraflex products present
on this catalogue are Ultraflex property and all rights are reserved.
INDEX
WIND GENERATORS
SECTION 5
Primus - Air Breeze, AirX Marine, Air 30 and Air 40 wind generators
Silentwind - wind generators
Superwind - wind generators
Leading Edge - wind generators
HYE - wind generators and hybrid charge controller
6
SECTION 6
SOLAR/THERMAL COLLECTORS
SECTION 7
Uflex - natural circulation solar and thermal systems
8
RAINWATER HARVESTING SYSTEMS
HEATERS AND STOVES
SECTION 8
Graf - Graf modular systems
Graf - column and semi-column systems
Wallas - heaters
Wallas - diesel stove heaters
9
pag.
pag.
pag.
pag.
pag.
5.1 - 5.2
5.3
5.4
5.5 - 5.7
5.8 - 5.9
STAND-ALONE PV KITS AND HYBRID SYSTEMS
Uflex - lighting kits, high power lighting kit
Uflex - pv kits for caravans
Uflex - solar/wind hybrid systems
HYE - solar/wind hybrid systems
Uflex - Hylander - self sustainable power unit
Whisper Power - hybrid power station
Dynad - fuel cell - Hydromax 150
7
PAG. 5.1 - 5.9
ACCESSORIES FOR SOLAR SYSTEMS
SECTION 9
Shurflo - pump for PV systems for pumping water from wells
Uflex - solar lighting for roads, parks and gardens
Uflex - solar LED marine lanterns
PAG. 6.1 - 6.10
pag.
pag.
pag.
pag.
pag.
pag.
pag.
6.1
6.2
6.3
6.4
6.5 - 6.6
6.7 - 6.8
6.9 - 6.10
INDEX
5
UF
LE
X
PAG. 7.1 - 7.2
pag. 7.1 - 7.2
PAG. 8.1 - 8.6
pag.
pag.
pag.
pag.
8.1
8.2
8.3 - 8.4
8.5 - 8.6
PAG. 9.1 - 9.3
pag. 9.1
pag. 9.2
pag. 9.3
Ultraflex S.p.A. declines any liability for possible mistakes in this catalogue due to printing errors.
Ultraflex S.p.A. reserves the right to make those modifications that are considered to be suitable
for its products.
Publishing rights, trade marks, part numbers and photographs of the Ultraflex products present
on this catalogue are Ultraflex property and all rights are reserved.
INDEX
UF
LE
X
S URANA
SURANA® - PV MODULES
Surana® employs top quality materials to
factory build reliable and long lasting multicrystalline PV Modules.
1.1
PV MODULES
Surana® prime quality main components are:
high efficiency cells, reflection-free and power
transmitting glasses, anodized aluminium
frames. Back positioned mounting holes for
easy of installation.
The Quality Management System at Photon®
is certified in compliance with ISO 9001:2008
standards.
Solar Modules manufactured by Surana®
are certified in accordance with
IEC61215, IEC61215 and CE standards.
Vmp(II)
Volt
Imp(III)
Amp
Voc(IV)
Volt
Isc(V)
Amp
Dimensions
mm (“)
Weight
kg (lbs)
Model
Part No.
Pmax(I)
Watt
SVL005*
69180 U
5
18.1
0.28
21.2
0.33
395x225x23 (15.5x8.9x0.9)
0.7 (1.5)
SVL010
69073 C
10
18.1
0.55
21.4
0.67
310x340x20 (12.2x13.4x0.8)
1.2 (2.6)
SVL020
69074 V
20
17.8
1.124
21.4
1.308
500x340x20 (19.7x13.4x0.8)
1.9 (4.2)
SVL040
69075 X
40
17.4
2.3
21.4
2.58
610x550x35 (24.0x21.6x1.4)
4.4 (9.7)
SVL055
69146 U
55
17.3
3.18
21.35
3.8
610x655x35 (24.0x25.8x1.4)
6.0 (13.2)
SVL060
69179 K
60
17.35
3.46
21.4
3.8
1135x510x35 (44.7x20.1x1.4)
7.0 (15.4)
SVL080
69076 Z
80
17.7
4.52
21.4
5.2
890x655x35 (35.0x25.8x1.4)
8.0 (17.6)
SVL0100
69077 B
100
17.7
5.64
21.4
6.5
1330x655x35 (52.4x25.8x1.4) 12.0 (26.5)
SVL0115
69078 D
115
17.9
6.42
22.0
7.07
1490x655x35 (58.7x25.8x1.4) 13.0 (28.7)
SVL0135
69079 F
135
18.4
7.4
22.1
8.35
1490x990x35 (58.7x39.0x1.4) 14.5 (32.0)
*: SVL005 5Wp modules will be provided only on request and for quantities.
Pmax: Nominal power
Imp: Current at Maximum Power
Vmp: Voltage at Maximum Power
Voc: Open Circuit Voltage
Isc: Short Circuit Current
SUPPORTS FOR PV MODULES
Roof fixing supports for photovoltaic modules
in plastic material. Suitable for any
photovoltaic module with aluminum frame.
To fix the single module you need 4 corner
supports.
The supports must be fixed to the roof safely
by using appropriate glue. However, it is
always recommended to reinforce the fixation
with screws.
Model
Part No.
Dimensions
mm (“)
Weight
kg (lbs)
KFP440/470
61454 M
465 x 65 x 73 (18.3 x 2.6 x 2.9)
0.9 (2.0)
KFP530/565
61907 Z
555 x 65 x 73 (21.8 x 2.6 x 2.9)
1.1 (2.4)
KFP650/660
61908 B
660 x 65 x 73 (26.0 x 2.6 x 2.9)
1.4 (3.1)
INDEX
UF
LE
X
UFLEX® - SEMI-FLEXIBLE
SOLAR PANELS
PV SOLAR MODULES
1.2
UFLEX® semi-flexible solar modules provide
clean and reliable power even in adverse
weather conditions. They are robust and
resistant to corrosion, lightweight and ultrathin, therefore easily usable in various
applications.
Slightly bendable, they can be mounted even
on curved surfaces. They are safe to step-on
and anti-slip, therefore particularly suitable
to be installed on the deck of a boat.
They feature multi-crystalline high
performance cells with silver anodized
aluminium frames. Black or white frames also
available on request.
Junction box protection category: IP67
Temperature range: -40°C÷85°C
Warranty: 5 years
TECHNICAL SPECIFICATIONS AT STANDARD ETC TEST (1000W/ m², 25°C, AM 1,5):
(I)
Model
Part No.
Pmax(I)
Watt
Vmp(II)
Volt
Imp(III)
Amp
Voc(IV)
Volt
Isc(V)
Amp
Dimensions
mm (“)
Weight
kg (lbs)
UMS25
68332 K
25
18,86
1,38
22,21
1,47
571x342x10 (22.5x13.5x0.4)
1,4 (3.1)
UMS50
68333 M
50
17,93
3,09
21,74
3,30
571x654x10 (22.5x25.7x0.4)
2,7 (6.0)
UMS100
68334 P
100
18,21
5,79
21,96
6,16
1039x654x10 (40.9x25.7x0.4)
4,8 (10.6)
Pmax: Nominal capacity
Vmp: Max voltage
(II)
POWER CURVE I-V FOR UMS100 PANEL:
INDEX
(III)
Imp: Max current
Voc: Open circuit voltage
(IV)
(V)
Isc: Short circuit current
UF
LE
X
XUNZEL™ - SEMI-FLEXIBLE SOLAR PANELS
The Xunzel™ solar panels are very thin
(3 mm – 0,12”), light and bendable up to 30°.
Thanks to the innovative All-Back-Contact
Technology, these solar panels supply higher power
than conventional PV modules of same size. By
adopting the Back-Contact technique, the wafer can
be coated with flexible materials and finally forms
the high efficiency flexible solar panel.
These panels offer high performances also early in
the morning, late in the evening and even on cloudy
days. They effectively absorb different wavelengths
of light to generate more electricity. Furthermore,
the hotter it gets, the better is their performance
compared to competitor efficiency.
Designed for boat and RVs applications, for off-grid
solutions (telecom, ups-backup energy, street
lighting, etc.)
PV SOLAR MODULES
1.3
FEATURES
■ Design: high quality, reliability and performance.
Crystalline silicon cell panels wuth patented AllBack-Contact Technology. Very thin, light and
bendable up to 30°
■ Endurance: High quality UV resistant materials
ensure a long life
■ Electrical Connection: Junction box mounted at
the front side for protection against corrosion.
The Xunzel™ solar panels are delivered with preassembled cables for a quick and safe installation
Model
Part No.
Pmax
Watt
Vmp
Volt
Imp
Amp
Voc
Volt
Isc
Amp
Dimensions
mm (“)
Weight
kg (lbs)
HD 18W
69528 J
18W
19.8
0.91
23.4
0.98
498x277x3 (19.6x10.9x0.12)
2.5 (5.5)
HD 30W
69527 G
30W
17.6
1.70
20.8
1.82
426x535x3 (16.8x21.1x0.12)
2.5 (5.5)
HD 50W
69526 E
50W
17.6
2.84
20.8
3.04
596x535x3 (23.5x21.1x0.12)
2.5 (5.5)
HD 100W
69525 C
100W
17.8
5.62
20.8
6.02
1096x540x3 (43.1x21.3x0.12)
2.5 (5.5)
HD 135W
69524 A
135W
24.9
5.43
29.0
5.82
1477x540x3 (58.1x21.3x0.12)
2.5 (5.5)
INDEX
UF
LE
X
SUNWARE® - MARINE PV SOLAR
MODULES
MARINE PV SOLAR MODULES
1.4
Sunware solar modules, without glass, are
functionally reliable, robust, light-weight,
weather-proof and sea-water resistant:
therefore they have been specially designed
for marine applications on board.
The innovative manufacturing process, make
them particularly suitable to be installed on
the deck of the boat, avoiding vibrations and
the negative effects of high temperature.
Self-cleaning and safe to step-on, SUNWARE
modules are easy to bend and can therefore
adhere to the deck (maximum bending 3%,
i.e. bending of 3 cm per 1 m long module).
Each module is supplied complete with
stainless steel back-plate, a sea-water proof
and UV resistant cable (3 m long – red/blue
2x1.5 mmq), a surrounding edge protection
profile and mounting stainless steel eyelets for
easy installation using screws, hooks or ropes.
MODEL
SW-3061
SW-3062
SW-3063
SW-3064
SW-3065
SW-3066
SW-3265
SW-3266
Codice
65103 C
65104 E
65105 G
65106 J
65107 L
65108 N
65109 R
65110 Z
P. Max Wp
12
18
24
36
48
70
48
70
N. Celle
40
40
40
40
40
40
80
80
Tensione nominale (V)
12
12
12
12
12
12
24
24
Imp. (A)
0.55
0.83
1.1
1.65
2.2
3.3
1.1
1.6
Voc (V)
24.6
24.6
24.6
24.6
24.6
24.6
49.2
49.2
Isc (A)
0.6
0.89
1.2
1.8
2.4
3.6
1.2
1.7
249 x 467 x 5
249 x 642 x 5
459 x 467 x 5
459 x 638 x 5
499 x 838 x 5
891 x 638 x 5
499 x 838 x 5
891 x 638 x 5
(9.8x18.4x0.2)
(9.8x25.3x0.2)
(19.6x33x0.2)
(35.1x25.2x0.2)
(19.6x33x0.2)
(35.1x25.2x0.2)
1.2 (2.6)
1.7 (3.7)
3.2 (7.0)
6.1 (13.4)
4.5 (9.9)
6.1 (13.4)
Dimensions mm (“)
Weight Kg (lbs)
(18.1x18.4x0.2) (18.1x25.4x0.2)
2.3 (5.0)
3.1 (6.8)
ACCESSORIES
MID CLIPS AND SIDE CLIPS
- Part No. 64098 H (2 clips)
- Part No. 64099 K (4 clips)
INDEX
PLUGS, SOCKETS AND CONNECTORS
- Male Socket: Part No. - 64100 R
- Female Socket: Part No. - 64101 T
- Plug: Part No. - 64102 V
- Bulkhead kit: Part No. - 64104 Z
- Bulkhead Connector: Part No. - 64103 Z
UF
LE
X
BISOL® - MONO AND MULTI-CRYSTALLINE SOLAR PANELS
BMO silicon mono-crystalline solar panels
BMU silicon multi-crystalline solar panels
WARRANTY: 10 years
CERTIFICATIONS: IEC 61215:2005 Ed. 2, IEC 61730 (Application class A), MSC, CE, Resistance test to corrosion from salt
spray (IEC 61701), Resistance test to ammonia (IEC 62716), Factory Inspection Certificate, ISO-9001, ISO-14001, ISO-18001
TECHNICAL SPECIFICATIONS AT STANDARD STC TEST (1000W/ m², 25°C, AM 1,5):
Dimensions
mm (“)
Weight
kg (lbs)
Model
Part No.
Pmax(I)
Watt
Vmp(II)
Volt
Imp(III)
Amp
Voc(IV)
Volt
Isc(V)
Amp
BMU-235
68516 W
235
29,6
7,95
37,6
8,50
1649x991x40 (64.9x39.0x1.6) 18,5 (40.8)
BMU-240
68517 Y
240
29,9
8,03
37,9
8,55
1649x991x40 (64.9x39.0x1.6) 18,5 (40.8)
BMU-245
68131 Z
245
30,2
8,15
38,1
8,65
1649x991x40 (64.9x39.0x1.6) 18,5 (40.8)
BMU-250
68518 A
250
30,9
8,25
38,4
8,75
1649x991x40 (64.9x39.0x1.6) 18,5 (40.8)
BMO-245
68519 C
245
30,2
8,10
37,8
8,70
1649x991x40 (64.9x39.0x1.6) 18,5 (40.8)
BMO-250
68155 P
250
30,5
8,20
37,9
8,80
1649x991x40 (64.9x39.0x1.6) 18,5 (40.8)
BMO-260
68520 L
260
31,0
8,40
38,3
9,00
1649x991x40 (64.9x39.0x1.6) 18,5 (40.8)
PV SOLAR MODULES
1.5
BSU integrated BIPV multi-crystalline solar panels
WARRANTY: 10 years
CERTIFICATIONS: IEC 61215:2005 Ed. 2, IEC 61730 (Application class A), MSC, CE, Factory Inspection Certificate, ISO-9001,
ISO-14001, ISO-18001
TECHNICAL SPECIFICATIONS AT STANDARD STC TEST (1000W/ m², 25°C, AM 1,5):
Vmp(II)
Volt
Imp(III)
Amp
Voc(IV)
Volt
Isc(V)
Amp
Dimensions
mm (“)
Weight
kg (lbs)
Model
Part No.
Pmax(I)
Watt
BSU-235
68521 N
235
29,6
7,95
37,6
8,50
1692x1016x29 (66.6x40.0x1.1) 18,4 (40.6)
BSU-240
68522 R
240
29,9
8,03
37,9
8,55
1692x1016x29 (66.6x40.0x1.1) 18,4 (40.6)
BSU-245
68212 Z
245
30,2
8,15
38,1
8,65
1692x1016x29 (66.6x40.0x1.1) 18,4 (40.6)
BSU-250
68523 T
250
30,3
8,25
38,4
8,75
1692x1016x29 (66.6x40.0x1.1) 18,4 (40.6)
INDEX
UF
LE
X
UFLEX® - POLE OR VERTICAL
WALL BRACKETS FOR
PV SOLAR PANELS
SUPPORTS FOR PV MODULES
1.6
BRACKET FOR PV SOLAR PANELS UP TO 20 W 69032 C
POLE BRACKET FOR PV SOLAR PANELS UP TO
60 W - 69034 G
Bracket for PV solar panels up to
20W
Pole bracket for pv solar panels up
to 60W
POLE BRACKET FOR PV SOLAR PANELS UP TO
115 W - 69956 G - Includes one bracket and
three clamps
These pole support kits are used for pole
mounting of PV solar panels. The brackets are
supplied complete with flange and screws to
fix the rail.
To install the PV panel you need one or two
mounting rails of the proper length and four
side fixing brakets. As the photovoltaic panels
have different thicknesses you must use the
appropriate fixing brackets.
KIT FOR PV MODULES
MOUNTING RAIL KIT FOR ONE SOLAR PANEL:
n° 2 mounting rails (see table)
n° 4 end clamps - 66289 B
n° 4 brackets - 66845 F
n° 4 screws - 81601 L + 4 nuts - 67044 Z
MOUNTING RAIL KIT FOR TWO SOLAR PANELS:
n° 2 mounting rails (see table)
n° 4 end clamps- 66289 B
n° 2 middle clamps - 66290 K
n° 4 brackets - 66845 F
n° 4 screws - 81601 L + 4 nuts - 67044 Z
MOUNTING RAIL
END CLAMP - 66289 B
BRACKET - 66845 F
MIDDLE CLAMP - 66290 K
N.1 STANDARD MOUNTING RAIL
L (mm)
PART No.
750
68162 L
1200
68426 V
1500
68163 N
1800
68223 E
3000
66287 X
INTERCONNECTION KIT - 67247 P
INDEX
UF
LE
X
UFLEX® - POLE BRACKETS FOR
PV SOLAR PANELS
They are designed to be functional, robust
and easy to install.
The pole braket kits are supplied with fixing
brakets for solar panels.
Painted galvanized iron structure
Pole Ø 67 to 100 mm
Resistant to strong wind
Adjustable inclination (support without
battery container)
■ Supplied with screws and bolts (support
with battery container)
■
■
■
■
■ Note: mounting rails are not included
POLE KIT - 69059 Z - support with battery
container and charge regulator
EL66215 - 69035 J - support without
battery container
Pole bracket without
battery container
Pole bracket with battery
container and
charge regulator
BATTERY BOXES
External box, to be placed on pole, suitable to
contain a single battery (up to 100Ah) and
electronic control. Complete with a plate for the
attack on the pole and with door locks.
SUPPORTS FOR PV MODULES
1.7
Reinforced polyester box - 69947 F
Metallic painted box - 69948 H
The PVC ground box, which can hold up to two
100Ah batteries, complete with cover and metal
support to guarantee isolation.
PVC ground box - 69949 K
Metallic
painted box
Reinforced
polyester box
PVC
ground box
SOLAR CABLES
6 mm2 cable with pre-assembed MC4 connectors:
3 m cable - 68767 Y
5 m cable - 69758 C
10 m cable - 69759 E
20 m cable - 69760 N
MC4 male connector - 69768 A
MC4 female connector - 68769 C
INDEX
UF
LE
X
UFLEX® - PV MOUNTING SYSTEM FOR FLAT ROOFS
CONSOLE PLUS™ - PV MOUNTING SYSTEM
SUPPORTS FOR PV MODULES
1.8
■ Suitable for flat roofs with max 5° slope.
No drilling and no damage on roof
■ PV panels dimensions: 1570-1730 mm height,
920-1054 mm width
■ Suitable for areas with wind load up to 4
and snow load of up to 3 (DIN 1055
compliant)
■ Also suitable for ground installations,
landfills, rocky undergrounds and conversion
sites
■ Aerodynamic version support angle at 15°
with wind deflector
■ Wind load tested and determined according
to Eurocode 1 - influence on load-bearing
structures EN1991-1-4:200
■ 100% recycled polyethylene, chlorine-free
(HDPE), sturdy, durable and weather
resistant
■ Complies with fire prevention measures
according to DIN 4102 class B2
■ TÜV certified
■ WARRANTY: 10 years
TRISOLE™ - PV MOUNTING SYSTEM
It allows the installation of framed PV modules
on flat roofs using mounting rails and
triangular aluminum supports adjustable at
different angles.
The structures, according to local conditions,
are fastened with screws or loadings.
A
D
H
I
#
INDEX
TriSole triangular mounting
34 - 51 mm complete end clamp
TriSole oblique wind bracing
Example of mounting system for roof
PV modules
UFLEX® - PV MODULE SUPPORTS FOR METAL ROOFS
UF
LE
X
METASOLE™ PV MOUNTING SYSTEM
Mounting solution MetaSole™ enables fast and inexpensive
installation of framed modules on roofing featuring
corrugated metal sheets having a thickness between 0.40 mm
and 1.00 mm.
Only four different components are required for the direct
installation of the modules: a clamp base with optimised
weight, two thin sheet metal screws with special coating, one
end clamp, and one middle clamp.
The screw with a crowding tip makes pilot drilling unnecessary,
which results in extremely short mounting time.
SEMI-INTEGRATED PV MODULE SUPPORT FOR SLOPING ROOFS
SUPPORTS FOR PV MODULES
1.9
VARIOSOLE™ MOUNTING SYSTEM
The VarioSole™ is suitable for all roofing types, framed PV modules featuring a thickness between 34 and 50 mm and,
thanks to height-adjustable mounting elements, even for unlevelled roofs.
The installation of the few, partially already pre-assembled components is easy and fast. VarioSole is a rail system that is
mounted on the rafters with special roof hooks. All that is usually necessary for the installation is to remove or slide up
single tiles. Removing the entire roof covering is therefore not required.
The roof hooks are made of extremely resilient, yet at the same time light aluminium diecast. Due to their design, the
roof hooks are especially rigid and stable. The rails that then fasten the modules in place with module clamps are
mounted on these hooks.
INDEX
UF
LE
X
MORNINGSTAR® - MPPT 600V
CHARGE CONTROLLERS
TRISTAR™ MPPT 600V
MPPT CHARGE CONTROLLERS
2.1
The TriStar™ MPPT 600V charge controller accepts PV
array or wind turbine input up to 600 Voc. It features
an advanced digital signal processor and utilizes
Morningstar’s TrakStar MPPT™ Technology to harvest
the maximum available energy from the solar array’s
or wind turbine’s peak power point within the
controller’s operating range. This high speed
processing technology and control methodology
enable the TriStar™ MPPT 600V charge controller to
sweep from the array’s or wind turbine’s Voc to the
battery voltage faster than any competing MPPT
controller on the market - in less than one tenth of a
second!
The TriStar™ MPPT 600V charge controller’s high
voltage capability and flexible design also make
several typical application scenarios possible:
■ Off-grid PV systems greater than 150 Voc with
long wire runs from the array to the controller
■ New installation grid-tie PV systems with battery
back-up
■ Retrofitting string PV inverter systems to later add
battery back-up without changing the PV array
configuration
■ Battery-based Wind systems
FEATURES
■ Delivers the industry’s best-in-class power
efficiency
■ Uses Morningstar’s advanced 4-stage charging
algorithm to optimize battery health
■ Features extensive system networking, monitoring
and communications
■ Is optimized for harsh environments and equipped
with extensive electronic protections
■ Offers superior lightning protection
■ Engineered with a robust thermal and mechanical
design to deliver the highest reliability and
excellent performance
MODEL
TS-MPPT-60-600V
TS-MPPT-60-600V-GDB
Part No.
68975 F
68976 H
Maximum battery current
60 A
60 A
Maximum input current
15 A
15 A
Nominal solar input
3200 Wp
3200 Wp
48 VDC
48 VDC
1.75 - 2.5 W
1.75 - 2.5 W
Charging algorithm
4 stage
4 stage
Dimensions cm (“)
39.2 x 22.1 x 14.9 (15.4 x 8.7 x 5.9)
54.2 x 22.1 x 14.9 (21.4 x 8.7 x 5.9)
Nominal system voltage
Self-consumption
Weight kg (lbs)
INDEX
9.0 (19.8)
12.8 (28.1)
UF
LE
X
MORNINGSTAR® - MPPT CHARGE CONTROLLERS
TRISTAR MPPT™
Morningstar’s TriStar MPPT solar controller
with TrakStar Technology™ is an advanced
maximum power point tracking (MPPT)
battery charger for off-grid photovoltaic (PV)
systems up to 3kW.
■ Temperature range: -40°C to +45°C
■ Max. Wire Size: 35 mm² / 2 AWG
■ Dimensions: 29,1 x 13,0 x 14,2 cm
(11.5” x 5.1” x 5.6”)
■ Weight: 4,2 kg (9.3 lbs)
■ Certifications:
CE, ETL Listed (UL1741), cETL (CSA C22.2
No. 107.1-01), FCC Class B Part 15
Compliant, Complies with NEC U.S. National
Electric Code
■ WARRANTY: 5 years
2.2
TRISTAR MPPT™
Part No.
Maximum charging current
Nominal
solar input
Maximum open circuit voltage
TS-MPPT-30
TS-MPPT-45
TS-MPPT-60
69060 H
67140 V
67054 C
30 A
45 A
60 A
400 Wp (12 V)
600 Wp (12 V)
800 Wp (12 V)
800 Wp (24 V) 1200 Wp (24 V)
1600 Wp (24 V)
1600 Wp (48 V) 2400 Wp (48 V)
3200 Wp (48 V)
150 V
System voltage
150 V
150 V
12/24/36 or 48 VDC
Options
TriStar Meter-2 indicator
yes
yes
yes
TriStar Meter-2 remote indicator
yes
yes
yes
MeterHub
yes
yes
yes
EIA-485 adapter
yes
yes
standard
SUNSAVER MPPT™
Morningstar’s SunSaver MPPT solar controller
with TrakStar Technology™ is an advanced
maximum power point tracking (MPPT)
battery charger for off-grid photovoltaic (PV)
systems up to 400Wp.
■ Maximizes the energy harvest from the PV
by rapidly finding the solar array peak
power point
■ Use of high Voltage Modules: Enables the
use of high voltage and thin film modules
for off-grid battery charging
■ Converts 24V to 12V: allows you to use a
solar power system 24V to charge a 12V
battery, reducing power losses due to a
long connection cable between the solar
system and the battery
■ Automatic Lighting Control: Up to four
programmable timer sequences for PV
lighting applications
■ Temperature range: -40°C to +60°C
■ Max. Wire Size: 16 mm² / 6 AWG
■ Dimensions: 16,8 x 5,5x 7,0 cm
(6.6” x 2.2” x 2.8”)
■ Weight: 0,6 kg (1.2 lbs)
■ Certifications: CE, UL1741, CSA C22.2 No.
107.1-01 recognized component
■ WARRANTY: 5 years
SUNSAVER MPPT™
Part No.
Maximum charging current
SS-MPPT-15L
66242 Y
15 A
Nominal
200 Wp (battery 12 V)
solar input
400 Wp (battery 24 V)
Maximum open circuit voltage
System voltage
MPPT CHARGE CONTROLLERS
■ Maximizes the energy harvest from the PV
by rapidly finding the solar array peak
power point
■ Peak efficiency of 99%
■ Extensive Networking and Communications
Capabilities: Enables system monitoring,
data logging and adjustability. Ethernet
included
■ Remote Temperature Sensor is included
■ Display: to be ordered separately
75 V
12/24 VDC
Options
Remote indicator
yes
Temperature remote sensor
yes
MeterHub
yes
PC Meterbus adapter
yes
DIN Rail Clips
yes
INDEX
UF
LE
X
MORNINGSTAR® - PWM CHARGE CONTROLLERS
TRISTAR™
Morningstar’s TriStar™ is a three-function
controller that provides reliable solar battery
charging, load control or diversion regulation.
PWM CHARGE CONTROLLERS
2.3
■ Highest reliability: Large heat sink and
conservative design enables operating at
full ratings to 45°C
■ More information: 3 LED´s to o indicate
status, faults and alarms. Optional meter
displays extensive system and controller
information, automatic self-test and reset
capabilities
■ Communications capability: RS-232
connects to a personal computer for
custom settings, data logging and remote
monitoring and control
■ Full adjustable: DIP switch provides user
with a choice of 7 different digital presets
and custom settings via RS-232
■ Extensive Electronic Protections: Fully
protected against reverse polarity, short
circuit, overcurrent, high temperature and
overvoltage
■ Display: to be ordered separately
■ Temperature range: -40°C to +45°C
■ Largest Wire: 35 mm² / 2 AWG
■ Dimensions: 26,0 x 12,7 x 7,1 cm
(10.2” x 5” x 2.8”)
■ Weight: 1,6 kg (3.5 lbs)
TS-45
TS-60
Part No.
63888 J
63889 L
45 A
60 A
12-48 VDC
12-48 VDC
TriStar Meter-2 indicator
yes
yes
TriStar Meter-2 remote indicator
yes
yes
Temperature remote sensor
yes
yes
MeterHub
yes
yes
EIA-485 adapter
yes
yes
Rated solar,
load or diversion current
System voltage
Options
■ Certifications: CE, ETL Listed (UL1741).
■ WARRANTY: 5 years
PROSTAR™
Morningstar’s ProStar™ is the world’s leading
mid-range solar controller for both
professional and consumer applications.
■ Increased battery capacity and life: PWM
series battery charging. Temperature
compensated charging and 3-position
battery select. Remote battery voltage
sense terminals
■ More information: 3 LEDs to indicate
status, faults and alarms. An optional
instrument provides safety disconnection
and indicates Amps, Volts, temperature,
and self-diagnostics
■ Electronic Protections: Reverse polarity,
Short-circuit, Overload, High temperature
disconnect, High voltage disconnect
■ Temperature range: -40°C to +60°C
■ Largest wire: 16 mm² / 6 AWG
■ Dimensions: 15,3 x 10,5 x 5,5 cm
(6.0” x 4.1” x 2.2”)
■ Weight: 0,34 kg (0.75 lbs)
■ Certifications: CE
■ WARRANTY: 5 years
INDEX
TRISTAR™
PROSTAR™
PS-15M
PS-30M
PS-15M-48V
Part No.
62643 W
61737 A
63072 H
Rated solar current
15 A
30 A
15 A
Rated load current*
15 A
30 A
15 A
12/24 VDC
12/24 VDC
48 VDC
Digital indicator
yes
yes
standard
Positive pole earth
no
yes
yes
Temperature remote sensor
yes
yes
yes
System voltage
Options
* Low voltage disconnect included on all ProStar™ controllers.
UF
LE
X
MORNINGSTAR® - PWM CHARGE CONTROLLERS
SUNSAVER™ (GEN3)
Morningstar’s SunSaver™ is the world’s
leading small solar controller for both
professional and consumer applications.
■ Temperature range: -40°C to +60°C
■ Largest Wire: 16 mm² / 6 AWG
■ Dimensions: 15,2 x 5,5 x 3,4 cm
(6.0” x 2.2” x 1.3”)
■ Weight: 0,23 kg (0.5 lbs)
2.4
SUNSAVER™
SS-6L
SS-10
SS-10L
SS-20L
SS-10L-24
61213 E
61415 B
61192 X
61734 U
61938 L
Rated solar current
6,5 A
10 A
10 A
20 A
10 A
Rated load current
6,0 A
10 A
10 A
20 A
10 A
System voltage
12 V
12 V
12 V
12 V
24 V
Low voltage disconnect
yes
no
yes
yes
yes
DIN Rail Clips
yes
yes
yes
yes
yes
Part No.
Options*
* The wire end cover is included in all SunSaver models
■ Certifications: CE, CE, ETL Listed (UL1741),
CSA C22.2 No. 107.1-01, FCC Class B Part 15,
Hazardous Locations..
■ WARRANTY: 5 years
SUNSAVER DUO™
Morningstar’s SunSaver DUO™ is an advanced
PWM two battery controller for RV’s,
caravans, boats and cottages.
■ Two Battery Charging: Solar charge current
is shared between the two batteries based
on a user selectable priority. When one
battery is fully charged, all of the charge
current flows to the other battery
■ High reliable: Epoxy encapsulation protects
the controller against dust and high
humidity. Electronic protections: solar short
circuit, solar over current and reverse
polarity
■ User adjustable: trough a DIP switch, the
user may change controller´s parameters.
Further customization is possible by
connecting to a computer using the PC
software Morningstar
SUNSAVER DUO™
Part No.
PWM CHARGE CONTROLLERS
■ Increased battery life: PWM to manage
four-stage battery charging with
temperature compensation. Possibility to
select sealed or liquid batteries
■ Environmental protection: Marine rated
terminals/anodized case aginst marine
corrosion
■ Rated for Hazardous Locations: Specifically
designed for solar power systems in the
oil/gas industry. Approved for use in Class 1,
Division 2, Groups A,B,C,D
■ New features: complete electronic
protections, 3 LEDs for battry chargoing
status, recovery of the battery, maximum
load: 15V
SSD-25RM
66129 C
Rated solar current
25 A
■ Temperature range: -40°C to +45°C
■ Largest wire: 16 mm² / 6 AWG
■ Dimensions: 17,0 x 5,6 x 4,1 cm
(6.7” x 2.2” x 1.6”)
■ Weight: 0,26 kg (0.6 lbs)
Rated output current*
none
Sytem voltage
12 V
■ Certifications: CE
■ WARRANTY: 5 years
Temperature remote sensor
yes
Meterbus PC adapter
yes
DIN Rail Clips
yes
Options
Remote indicator
included
* There is no load connection on the SunSaver Duo
INDEX
UF
LE
X
MORNINGSTAR® - PWM CHARGE CONTROLLERS
SUNKEEPER™
By mounting directly to the module junction
box and wiring through the junction box
knockout, the connection is weather-proof.
This eliminates the need for an additional
housing for the controller.
PWM CHARGE CONTROLLERS
2.5
■ High Reliability: Rated to 70°C to operate
in high temperatures at the solar module.
No need to re-rate
■ Outdoor Rated: ETL approved for outdoor
use without an additional enclosure.
Rugged IP65, UV resistant case. Epoxy
encapsulated printed circuit board and
watertight connection to the module
junction box
■ Rated for Hazardous Locations: Specifically
designed for solar power systems in the
oil/gas industry. Approved for use in Class 1,
Division 2, Groups A,B,C,D
■ Temperature range: -40°C to +70°C
■ Wire terminations: 8 fork connectors
■ Dimensions: 9,9 x 5,1 x 1,3 cm
(3.9” x 2.0” x 0.5”)
■ Weight: 0,11 kg (0.24 lbs)
SK-6
SK-12
65214 M
65215 O
Rated solar current
6A
12 A
Rated load current*
none
none
System voltage
12 V
12 V
optional (RTS)
optional (RTS)
Part No.
Options
Temperature remote sensor
* There is no load connection on the SunKeeper
■ Certifications: CE, Hazardous Locations.
■ WARRANTY: 5 years
SUNLIGHT™
Morningstar’s SunLight™ solar lighting
controller combines the SunSaver design with
an advanced microcontroller for automatic
lighting control functions.
■ 10 lighting options: User adjustable
lighting for 2 to 10 hours or overnight. The
unique feature ON / OFF / ON allows you to
preserve energy and still illuminate for 1 or
2 hours before dawn. The accuracy of the
timer is within 2 seconds
■ Easy to install: Test button flashes red LED
to confirm correct rotary switch selection
■ Designed to be durable: electronics
encapsulated in an epoxy compound,
terminals classified as marine and housing
in anodized aluminum
■ Temperature range: -40°C to +60°C
■ Largest wire: 16 mm² / 6 AWG
■ Dimensions: 16,8 x 5,5 x 3,4 cm
(6.6” x 2.2” x 1.3”)
■ Weight: 0,26 kg (0.6 lbs)q
■ Certifications: CE
■ WARRANTY: 5 years
INDEX
SUNKEEPER™
SUNLIGHT™
Part No.
SL-10L-12V SL-10L-24V SL-20L-12V SL-20L-24V
61416 D
61735 W
61887 W
63868 C
Rated solar current
10 A
10 A
20 A
20 A
Rated load current*
10 A
10 A
20 A
20 A
System voltage
12 V
24 V
12 V
24 V
yes
yes
yes
yes
Options
DIN Rail Clips
* Low voltage disconnect is inculded in all SunLight controllers
UF
LE
X
MORNINGSTAR® - PWM CHARGE CONTROLLERS
SUNGUARD™
Morningstar’s SunGuard™ is the most
advanced small, economical solar charge
controller on the market today.
■ Highly reliable: Epoxy encapsulation
protects the controller against dust and
high humidity. Rated for 25% overloads
and no need to derate
■ Increases battery life: PWM to manage
with no shunt battery charging with
temperature compensation. Low power
consumption
■ Easy to install: waterproof connections to
the PV modules and battery
■ Certifications: CE, Hazardous Locations.
■ WARRANTY: 5 years
SHS™
Morningstar’s SHS™ controller was specifically
designed to meet the needs of rural solar
home systems.
■ High reliability: The SHS™ has built-in
electronic fuses that do not require
replacement. Any wiring mistakes during
installation will not damage the
controller.The SHS™ electronics are
protected with a moisture-tight coating,
minimizing damage from humidity and
from nesting insects
■ Easy to install: LEDs display status
information and battery level. The SHS™
controller is fully automatic and requires no
adjustments or user selections
■ Automatic Lighting Control:
Automatically turns light on at dusk and
turns light off at dawn
■ Temperature range: 25°C to +50°C
■ Largest wire: 6 mm²
■ Dimensions: 15,1x 6,6 x 3,6 cm
(5.9” x 2.6” x 1.4”)
■ Weight: 113 g (0.24 lbs)
■ Certifications: CE, World Bank
■ WARRANTY: 5 years
SUNGUARD™
SG-4
Part No.
61732 P
Rated solar current
4,5A
Rated load current*
none
System voltage
12V
*There is no load connection on the SunGuard
SHS™
SHS-6
SHS-10
64442 W
64443 Y
Rated solar current
6A
10 A
Rated load current*
6A
10 A
System voltage
12 V
12 V
yes
yes
Part No.
PWM CHARGE CONTROLLERS - INVERTER
■ Temperature range: -40°C to +60°C
■ Dimensions: 6,4 x 5,1 x 3,8 cm
(2.5” x 2.0” x 1.5”)
■ Weight: 0,09 kg (0.2 lbs)
2.6
Options
Night Light
* Low voltage disconnect is included on all SHS controllers
MORNINGSTAR® PURE SINE WAVE INVERTER
SURESINE™
SureSine™ is a pure sine wave inverter
designed specifically for remote off-grid
photovoltaic systems. It is an ideal inverter for
rural electrification projects, telecom, remote
cabins and weekend homes, and RV or
caravans and boats.
■ Temperature range: -40°C to +45°C
■ Largest wire: 35 mm² / 2 AWG
■ Dimensions: 21,3 x 15,2 x 10,5 cm
(8.4” x 6.0” x 4.1”)
■ Weight: 4,5 kg (9.9 lbs)
■ Certifications: CE, UL, cUL
■ WARRANTY: 2 years
SURESINE™
Part No.
SI-300
65635 N
Continuous power
300Watt@ 25°C
Peak power (10 minutes)
600Watt@ 25°C
DC input voltage
10.0-15.5V
INDEX
UF
LE
X
MORNINGSTAR®
GFPD - GROUND FAULT PROTECTION
GFPD
GROUND FAULT PROTECTION
2.7
Morningstar’s Ground Fault Protection Device (GFPD) is
an innovation for ground fault detection and
interruption for the photovoltaic (PV) industry.
It has greater sensitivity and better isolation while
maintaining the bond to earth ground. Ground fault
protection is used in electrical systems to prevent
current from following any unintended paths during a
ground fault.
■ Simple and Flexible Installation: side or below flush
mounting with coupling hardware included. Includes
fused battery cable for power. Compatible with
other supplier’s PV controllers and inverters. For
positive or negative grounded PV systems
■ Greater Sensitivity: more precise than fused ground
fault protection, it activates starting at 300mA
compared to 1A for alternative solutions
■ Mantains the bond to earth ground: normally
grounded components (conductors, controller,
battery and DC loads) will not be left floating
■ No fuses: avoids problematic replacements of fuses,
which are often unavailable at remote sites. Uses
high quality breaker switches that continue to
operate after ground fault interruptions
■ Safety features: breaks the connection to the PV
array during a fault condition. It leaves the battery
and DC loads grounded under all conditions.
Alternative ground fault solutions require a warning
label on the battery to note that dangerous voltage
are present
■ Better isolation: disconnects both the positive and
negative conductor. Completely isolates the ground
fault the controller, battery and loads
■ Supports both single controller and multiple
controller systems: will only shut off affected
controllers while maintaining the system earth bond.
All loads will continue to operate safely with the
battery remaining bonded to the ground
■ Certifications: CE, RoHS and REACH; UL 1741 and
CSA C22.2 No. 107.1-01; GFPD-150V (UL-489); GFPD600V (UL-1077); Meets EMC directives; FCC Class B
Part 15 compliant; NEC 690.5 compliant;
Manufactured in a certified ISO 9001 facility
MODEL
GFPD-150V
Part No.
68977 K
68978 M
Maximum solar voltage (Voc)
150 V
600 V
Maximum solar current
60 A
50 A
Nominal system voltage
12 - 24 - 36 - 48 V
Self-consumption
< 0,5 W
Ground fault threshold current
Operating temperature
Dimensions cm (“)
Weight kg (lbs)
INDEX
GFPD-600V
300 mA ± 10%
-40°C ÷ +50°C
-40°C ÷ +50°C
26.9 x 12.8 x 11.2 (10.6 x 5.0 x 4.4)
35.7 x 22.1 x 10.6 (14.1 x 8.7 x 4.2)
2 (4.4)
4.4 (8.8)
MORNINGSTAR® - ACCESSORIES FOR
CHARGE CONTROLLERS
UF
LE
X
TS-M-2 - 67055 E - TRISTAR METER-2 Digital display for TriStar charge controllers
■ 2 x 6 character LCD’
■ to be mounted on the controller
■ displays system and controller information, legged data, bar graph
metering, alarms and faults
■ the information may be shown in five languages
TS-RM-2 - 67590 D - TRISTAR REMOTE METER-2 Remote digital display for TriStar charge controllers
Compatibility:
TriStar
TriStar MPPT
■ same features of TS-M-2. It includes 30 m cable for remote
mounting
RM-1 - 68470 Y - REMOTE METER Universal digital display for several Morningstar® devices
Compatibility:
SunSaver Duo
SureSine Inverter
■ four digit display with custom icons
■ provides comprehensive system information for easy monitoring
including voltage, current and temperature
■ may be mounted in the wall or on the wall using the included
frame
■ also includes 10 meters of wiring
RD-1 - 64735 M - RELAY DRIVER Logic module accessory for solar controllers
Compatibility:
TriStar
TriStar MPPT
All other charge
controllers
■ four independent relay driver outputs by reading digital data
inputs
■ uhigh and low alarm contacts, load control, generator start
functions
■ displays digital data by TriStar™ or TriStar™ MPPT
■ displays battery voltage even with other charge controllers
HUB-1 - 68463 B - METERHUB Solar controller communication hub
Compatibility:
TriStar, TriStar MPPT
TriStar Meter-2, TriStar
Remote Meter-2, SunSaver
MPPT, Relay Driver
■ allows multiple Morningstar products to communicate over a
Meterbus network (max 5 devices)
■ enables multiple controllers to share a single TriStar meter and a
Relay Driver
■ the product electrically isolates devices that supply power to the
network
RTS-1 - 64025 D - REMOTE TEMPERATURE SENSOR measures temperature at the battery
Compatibility:
TriStar, TriStar MPPT
ProStar, Sunkeeper
SunSaver Duo
SunSaver MPPT
■ improves battery charging thanks to very accurate temperature
compensation accuratamente la temperatura della batteria
■ use of the RTS is recommended whenever the temperature at the
battery will be more than 5°C (9°F) different than the temperature
at the controller
2.8
ACCESSORIES FOR MORNINGSTAR® PRODUCTS
Compatibility:
TriStar
TriStar MPPT
MSC - 68091 P - PC METERBUS ADAPTER Converts a controller’s meter port RJ-11to a standard RS-232
Compatibility:
SunSaver Duo
SunSaver MPPT
■ used to connect any Morningstar controller or inverter to a PC or
other equipment
■ establishing a communications link enables the monitoring or
logging of data from the controller or inverter as well as the
customizing of any user-adjustable settings
■ to be used with Morningstar devices with RJ-11 input (not RS-232)
RSC-1 - 68471 A - EIA-485 / RS-232 ADAPTER converts a controller RS-232 to EIA-485
Compatibility:
TriStar
TriStar MPPT
Relay driver
■ allows up to 128 Morningstar products to communicate on the
same communication bus and over much greater distances
■ all data is transmitted in the form of MODBUS protocol
DIN-1 - 68472 C - DIN RAIL CLIPS to install SunSaver™ family of solar charge controllers to DIN Rails
Compatibility:
SunSaver
SunLight
SunSaver Duo
SunSaver MPPT
■ these rugged plastic clips have been custom made to match the
mounting holes on the SunSaver controllers
■ the clips also provide a mechanism to allow easy removal of the
controller from the DIN rail without removing the clips
INDEX
UF
LE
X
STUDER® - MPPT CHARGE CONTROLLER
VARIOSTRING VS-120
The VarioString VS-120 is a MPPT solar charge
controller 120A/48V. Fully isolated dual MPPT inputs
up to 600V (Voc) (2x3.5kWp) or up to 900V (Voc)
(7kWp) with MPPT inputs in series.
MPPT CHARGE CONTROLLERS
2.9
■ Reduces Balance of System costs: eliminates
expensive wiring for parallel strings, saving wires,
connectors, junction boxes, fuses, space, time etc
■ Safe, simple and trouble free connection: with
SUNCLIX™ (Phoenix Contact “tool free”) PV
connector
■ Fully protected against wrong wiring
■ Simplified safety rules by full isolation between PV
and battery and between MPPT inputs
■ Any grounding strategy applicable thanks to
isolated MPPT inputs. Grounding system fault
detection
■ MPPT efficiency >99%: fast precise best in class
tracking algorithm. World champion for efficiency
in isolated converter with >98% conversion
efficiency
■ 7 kWp per unit an up to 15 units in parallel: 105
kWp
■ Low self-consumption: < 1,2W in night moode
■ 4 step charger fully programmable for longer
battery life
■ 9 LEDs to monitor status and current
■ Optimal usage in a Xcom-LAN or Xcom-GSM
■ Certifications: EMC 2004/108/CE – LV 2006/95/CE –
RoHs 2002/95/CE – IEC/EN 62109-1:2010 – IEC/EN
61000-6- 3:11 - IEC/EN 61000-6-12005
■ Warranty: 5 years
MODEL
VarioString VS-120
Part No.
69907 T
Electrical characteristics PV array side
MPPT 1
MPPT 2
1+2 parall.
1+2 serie
Max. solar power recommended
3500 Wp
3500 Wp
7000 Wp
7000 Wp
Maximum current (Isc)
13 A
13 A
26 A
26 A
Max. open circuit voltage (Voc)
600 V
600 V
600 V
900 V
Maximum output current
120 A
Nominal battery voltage
48 V
Operating temperature
-20°C ÷ +55°C
IP protection
Dimensions mm (“)
Weight kg (lbs)
INDEX
IP 20
133 x 322 x 466 (5.2 x 12.7 x 18.3)
7,5 (16.5)
UF
LE
X
STUDER® - MPPT CHARGE CONTROLLER
VARIOTRACK™
When connected to solar panels and batteries,
the solar charge controller Variotrack™
automatically charges the batteries in an
optimal way with all the available solar power
using its algorithm for Maximum Power Point
Tracking (MPPT).
■ Temperature range: -20°C to +55°C
■ Largest wire: 35 mm²
■ Dimensions: 11,0 x 21,0 x 31,0 cm
(4.3” x 8.3” x 12.2”)
■ Weight: 4,7 kg (10.4 lbs)
■ Certifications: EMC 2004/108/CE LV 2006/95/CE - RoHS 2002/95/CE
■ WARRANTY: 5 years
VARIOTRACK™
VT-65
VT-80
68477 N
68390 A
65 A
80 A
Nominal
850 Wp (battery 12V)
1050 Wp (battery 12V)
solar input
1700 Wp (battery 24V)
2100 Wp (battery 24V)
3400 Wp (battery 48V)
4200 Wp (battery 48V)
Maximum open
circuit voltage
150 V
150 V
System voltage
12/24 or 48 VDC
12/24 or 48 VDC
Part No.
Maximum battery current
MPPT CHARGE CONTROLLERS
2.10
■ Maximize the energy generated from solar
panels through maximum power point
tracking
■ High conversio efficiency: 98%ge charge
■ Increased battery life 4-sta
■ Rugged and durable: designed to perform
in harsh environmental conditions (IP54)
■ Can be installed up to 15 Variotrack™ in
parallel
■ Low consumption: ON< 5W, standby < 1W
(in night time mode)
■ Display with 6 LEDs showing system status
and current
■ Multifunctional display,programming and
datalogging with RCC-02/-03
■ Can be integrated into a Xtender system
with synchronized battery control
■ Easy and safe to install: fully protected
against incorrect wiring
■ Electronical protections: reverse polarity,
short circuit, overload, high temperature,
overvoltage, night reverse current
ACCESSORIES
RCC-02 66144 Y
Remote control
RCC-03 68478 R
Remote control
BTS-01 66150 T
Battery
temperature sensor
INDEX
UF
LE
X
STUDER® - BATTERY CHARGER / INVERTERS
SERIE XTENDER™
XTENDER™ BATTERY CHARGER/INVERTERS
2.11
XTender™ series provides an unmatched freedom of use
due to its many functions. In a basic application, it offers
a total package: the functions of inverter, battery
charger, transfer system and assistance to the source.
These functions can be combined and controlled in a
totally automatic way for exceptional ease and optimal
management of available energy.
■ Smart-Boost function: allows you to add the inverter
power to another source, eg. a generator, another
inverter or the grid to increase the available power
■ Multi-function contacts: can be programmed to
provide many additional features. Can be
programmed as time switch
■ Programmable auxiliary contacts for interconnection
with existing systems and implementation of functions
■ Possibility to connect up to 9 XTender™ in parallel,
both to increase the available power, and to create a
three-phase source
■ Automatic reduction of peak loads with the
distribution of the available power
■ Adjustable stand-by
■ Multistage programmable battery charger with PFC
■ DSP: control using digital signal processors
■ Overload electronic protection
XTENDER™
XTS 900-12V
XTS 1200-24V
XTS 1400-48V
Part No.
68493 L
68494 N
68495 R
Power P30
900 VA
1200 VA
1400 VA
Continuous power
500 VA
650 VA
750 VA
35 A
25 A
12 A
16 A / 0.9 kVA
16 A / 1.2 kVA
16 A / 1.4 kVA
Battery charger
Transfer relay
XTENDER™
XTM 1500-12V
XTM 2000-12V
XTM 2400-24V
XTM 2600-48V
XTM 3500-24V
XTM 4000-48V
Part No.
68487 S
68488 U
68489 W
68490 E
68491 G
68492 J
Power P30
1500 VA
2000 VA
2400 VA
2600 VA
3500 VA
4000 VA
Continuous power
1500 VA
2000 VA
2000 VA
2000 VA
3000 VA
3500 VA
70 A
100 A
55 A
30 A
90 A
50 A
50 A / 1.5 kVA
50 A / 2.0 kVA
50 A / 2.4 kVA
50 A / 2.6 kVA
50 A / 3.5 kVA
50 A / 4.0 kVA
Battery charger
Transfer relay
XTENDER™
XTH 3000-12V
XTH 5000-24V
XTH 6000-48V
XTH 8000-48V
Part No.
68479 T
68480 B
66149 J
68481 D
Power P30
3000 VA
5000 VA
6000 VA
8000 VA
Continuous power
2500 VA
4500 VA
5000 VA
7000 VA
160 A
140 A
100 A
120 A
50 A / 3 kVA
50 A / 5 kVA
50 A / 6 kVA
50 A / 6 kVA
Battery charger
Transfer relay
INDEX
STUDER® - ACCESSORIES FOR
BATTERY CHARGER / INVERTERS
UF
LE
X
RCC-02/-03 - 66144 Y/68478 R - Remote control
BTS-01 - 66150 T - Battery temperature sensor
■ Allows the automatic compensation of the adjustable thresholds of the battery voltage
■ Supplied with 5 m cable
RCM-10 - 68497 V - Remote ON/OFF CONTROL
■ Remotely control the input to XTS system functions
■ Supplied with 5 m cable
■ For mounting on DIN rail
BSP 500/1200 - 68498 X/68499 Z - Control to monitor battery charging status
■ It is connected to the BUS communication of the XTS systems
■ Displays the recorded data and controls the 2 auxiliary contacts of the XTS systems
■ Supplied with 5 m cable
Xcom-232i - 68500 E - Communication module between XTS systems and SCADA control
■ RS-232 input and 2 m of RJ45 cable
Xcom-MS - 68501 G - Communication module between XTS systems and MPPT (TriStar™) charge controllers
■ Allows to set parameters, to read the measured values from the charge controller and to
synchronize battery charging
■ The main values can be stored in the SD card of the RCC command or can be accessed via the
communication module Xcom-231i
■ Supplied with 2 m cable
ARM-02 - 68503 L - Support module to mount XTS systems on DIN RAIL
2.12
ACCESSORIES FOR STUDER® PRODUCTS
■ Enables the setting of the parameters as well as the display of the values measured
■ By an SD card, it is possible to log the system data and to save and restore the parameters of
the system
■ Supplied with 2 m cbale
■ Available for wall mounting (model RCC-02) or flush mount (model RCC-03)
■ Supplied with 2 auxiliary contacts controlled by XTS systems
EFC-01 - 68504 N - External cooling module (IP54)
■ This accessory increases the XTS system power
■ To be installed directly on XTS casing and it can be mounted in any time even after
installation
CAB-RJ45-8-xx - 68505 R - Communication cable between XTS systems and accessories
■ Available length: 2, 5, 10, 20, 50 m
■ Other length are available on request
INDEX
UF
LE
X
STUDER® - PURE SINE WAVE INVERTERS
AJ SERIES
AJ SERIES INVERTERS
2.13
The AJ range consists of sine wave inverters
that convert a battery´s DC voltage into AC
voltage, which can be used by all electrical
appliances.
■ Digital control by microprocessor, ensures
high performance. The toroidal transformer
and MOS power stage allow maximum
efficiency
■ Steady output voltage:
230 V +/- 5%, 50 Hz +/- 0,05%
■ Charge controller built-in for PV solar
systems
■ Protection against: short circuit, reverse
polarity, overload, overheat and
overcurrent
■ Automatic disconnect with alarm in case of
low battery
■ IP 30 (IP 20 per AJ 2000)
■ High reliability, silent, complete with
connecting cables
■ CE certified
■ WARRANTY: 2 years
AJ SERIES
Model
Part No.
Nominal voltage (V)
AJ 200
AJ 800
AJ 2000
700-48
1000-12 1300-24
2100-12 2400-24
61845 D 61847 H 62979 G 61849 M 61851 Y 62980 R
61853 C 61855 G
62981 T 62983 X
275-12
350-24
AJ 400
400-48
500-12
600-24
12
24
48
12
24
48
12
24
12
24
10.5-16
21-32
42-64
10.5-16
21-32
42-64
10.5-16
21-32
10.5-16
21-32
Continuous power (VA)
200
300
300
400
500
500
800
1000
2000
2400
Power for 30 min – P30- (VA)
275
350
400
500
600
700
1000
1300
2100
2400
Peak power for 5 s (VA)
450
650
1000
1000
1200
1400
2200
2800
5000
5200
Efficiency
93%
94%
94%
93%
94%
94%
93%
94%
92%
94%
Stanby current draw (W)
0.3
0.4
0.4
0.3
0.4
1
0.3
0.4
0.5
0.4
No load current draw (W)
1.9
3.3
5.0
3.8
8.5
10
9.0
10.0
13.0
18.0
Voltage range (V)
Dimensioni mm (“)
Dimensions mm (“)
Weight kg (lbs)
Standby system (from 1 to 20 W)
Charge controller (option S)
142 x 163 x 84
142 x 240 x 84
142 x 428 x 84
273 x 399 x 117
(5.6 x 6.4 x 3.3)
(5.6 x 9.4 x 3.3)
(5.6 x 16.8 x 3.3)
(10.7 x 15.7 x 4.6)
4.5 (9.9)
8.5 (18.7)
19 (41.9) 18 (39.7)
Only with controller
standard
standard
standard
10 A
15 A
25 A
30 A
2.4 (5.3)
2.6 (5.7)
On demand: JT8 remote control with 10 m. cable, alarm and AJ 800 and AJ 2000 display.
INDEX
UF
LE
X
UFLEX® - INVERTER/BATTERY CHARGERS
ICPV 3 kVA and 5 kVA (MPPT)
Pure sine wave inverter with built-in MPPT solar charge controller
Selectable input voltage range for home appliances and personal computers
Selectable charging current based on applications
Configurable AC/Solar input priority via LCD setting
Compatible to mains voltage or generator power
Auto restart function, overload and short circuit protection, cold start function
Smart battery charger design for optimized battery (MPPT) performance
2.14
■ Optional components:
PARALLEL KIT - 69391 H - Parallel operation with up to 6 units only for
48V/5000VA version
CONTROL PANEL - 69390 F - Remote Control Panel available
MOD-BUS - 69501 M - Box to communicate with MOD-BUS protocol
ICPV (MPPT)
CONTROL PANEL - 69390 F
MODEL
Part No.
Rated power
INVERTER
MOD-BUS - 69501 M
PARALLEL KIT - 69391 H
ICPV 24V/3kVA plus
ICPV 48V/5kVA plus
69909 X
69389 X
3000 VA / 2400 W
5000 VA / 4000 W
Voltage
Selectable voltage range
230 VAC
170-280 VAC (Personal Computers) 90-280 VAC (Home Appliances)
Frequency
50 Hz / 60 Hz (auto sensing)
AC voltage regulation (batt. mode)
Surge power
230 VAC ± 5%
6000 VA
10000 VA
Efficiency (Peak)
93%
Transfer time
10 ms (PC) 20 ms (home appliances)
Waveform
Pure sine wave
BATTERY
Battery voltage
24 VDC
48 VDC
CHARGERS AC
Floating charge voltage
27 VDC
54 VDC
Overcharge protection
31 VDC
60 VDC
CHARGE
Maximum PV array power
1500 W
3000 W
CONTROLLER
MPPT range @ operating voltage
Maximum PV array open circuit voltage
30 VDC˜ 115 VDC or 60 VDC˜ 115 VDC
60 VDC˜ 115 VDC
145 VDC
145 VDC
Maximum PV charging current
60 A
60 A
Maximum AC charging current
20 A or 30 A
60 A
30 A
120 A
Maximum charging current
Maximum efficiency
98%
Standby power consumption
2W
Best PV configuration
Dimensions mm (“)
Weight kg (lbs)
Humidity
Operating temperature
Storage temperature
INVERTER/BATTERY CHARGERS
■
■
■
■
■
■
■
1500 Wp (250 Wp x 6 pz.)
3000 Wp (250 Wp x 12 pz.)
140 x 295 x 479 (5.5 x 11.6 x 18.9)
140 x 295 x 540 (5.5 x 11.6 x 21.3)
11.5 (25.4)
13.5 (29.8)
5% to 95% Relative Humidity (non-condensing)
0°C - 55°C
-15°C - 60°C
INDEX
UF
LE
X
INVERTER/BATTERY CHARGERS
2.15
UFLEX® - INVERTER/BATTERY CHARGERS
ICPV 1, 2, 3 and 5 kVA (PWM)
■ Pure sine wave inverter
■ Selectable input voltage range for home appliances and personal
computers
■ Selectable charging current based on applications
■ Configurable AC/Solar input priority via LCD setting
■ Compatible to mains voltage or generator power
■ Auto restart function, overload and short circuit protection, cold start
function
■ Smart battery charger design for optimized battery (MPPT) performance
■ Optional components:
CONTROL PANEL - 69390 F - Remote Control Panel available
MOD-BUS - 69501 M - Box to communicate with MOD-BUS protocol
ICPV (PWM)
MOD-BUS - 69501 M
CONTROL PANEL - 69390 F
MODEL
Part No.
Rated power
INVERTER
ICPV 12V/1kVA
ICPV 24V/2kVA
ICPV 24V/3kVA
69499 E
69783 B
69500 K
1000 VA / 800 W
2000 VA / 1600 W
3000 VA / 2400 W
Voltage
Selectable voltage range
50 Hz / 60 Hz (auto sensing)
230 VAC ± 5%
2000 VA
4000 VA
CHARGERS AC
Floating charge voltage
10 ms (PC) 20 ms (home appliances)
Pure sine wave
12 VDC
24 VDC
48 VDC
13.5 VDC
27 VDC
54 VDC
Overcharge protection
15 VDC
30 VDC
60 VDC
CHARGE
Maximum PV voltage per string
40 VDC
60 VDC
105 VDC
CONTROLLER
Maximum PV charging current
Maximum AC charging current
50 A
10 A or 20 A
Maximum charging current
Standby power consumption
Dimensions mm (“)
Weight kg (lbs)
Humidity
Operating temperature
Storage temperature
INDEX
10000 VA
93%
Waveform
Battery voltage
6000 VA
90%
Transfer time
BATTERY
5000 VA / 4000 W
170-280 VAC (Personal Computers) 90-280 VAC (Home Appliances)
AC voltage regulation (batt. mode)
Efficiency (Peak)
69785 F
230 VAC
Frequency
Surge power
ICPV 48V/5kVA
20 A or 30 A
60 A
50 A
110 A
1W
2W
95 x 240 x 316
100 x 272 x 355
120 x 295 x 468
(3.8 x 9.5 x 12.5)
(3.9 x 10.7 x 14.0)
(4.7 x 11.6 x 18.4)
5.0 (11.0)
6.4 (14.1)
6.9 (15.2)
5% to 95% Relative Humidity (non-condensing)
0°C - 55°C
-15°C - 60°C
9.8 (21.6)
UF
LE
X
WHISPER POWER - BATTERY CHARGERS
®
WBC-HANDY 20; WBC-HANDY 70; WBC-HANDY 150
■ Fully automatic chargers for all types of lead-acid batteries (WET,
AGM, GEL)
■ Self adjusted temperature compensation, assuring cold start in
winter and preventing from overcharging in summer
■ Easy battery size selection and power supply function enabling
forced float charge
■ Equipped with Charging Status Interface, indicating charge phase at
a glance
■ Reverse polarity protection with built-in flashlight
■ Standard supplied with permanent installation kit, for fixed
installations.
WBC-HANDY 20
WBC-HANDY 70
WBC-HANDY 150
68259 C
68260 L
68261 N
220-240 VAC ± !0%
220-240 VAC ± !0%
220-240 VAC ± !5%
Charging voltage
13,7-15,5 VDC to 25°C
13,7-15,5 VDC to 25°C
13,7-15,5 VDC to 25°C
Charging current
Max 2 A
Max 7 A
Max 15 A
Battery capacity
1-40 AH
1-150 Ah (max 180 Ah)
20-300 Ah (max 360 Ah)
Part No.
Input voltage
Dimensions mm (“)
Weight kg (lbs)
225 x 50 x 50
315 x 65 x 65
315 x 65 x 65
(8.8 x 2.0 x 2.0)
(12.4 x 2.6 x 2.6)
(12.4 x 2.6 x 2.6)
0,350 (0.77)
0,500 (1.1)
0,800 (1.8)
ACCESSORIES
68262 R - Fixed
installation kit
68263 T - Battery fast
connect clamps
BATTERY CHARGERS
WBC-HANDY™
2.16
WBC SUPREME SERIES BATTERY CHARGERS
■
■
■
■
■
■
■
■
■
Designed with multiple outputs to charge up to 3 batteries
Adjustable for GEL, AGM or Lithium flooded lead acid batteries
Auto ranging input from 90-260VAC, 50 / 60Hz
Fully automatic three-stage charging method
Supplied with temperature sensor and cable
Fully protected against short circuit and over temperature
Easy to install
Easy to use with LCD display
ABYC certified
MODEL
WP-BC 12/20
WP-BC 12/40
WP-BC 12/60
WP-BC 24/30
Part No.
68524 V
68525 X
68526 Z
68527 B
230-240 VAC ± !0%
230-240 VAC ± !0%
230-240 VAC ± !0%
230-240 VAC ± !0%
Charging current
20 A
40 A
60 A
30 A
Charging voltage
12 VDC at 25°C
12 VDC at 25°C
12 VDC at 25°C
24 VDC at 25°C
-20°C +60°C
-20°C +60°C
-20°C +60°C
-20°C +60°C
Power consumption (Full Load)
350 W
700 W
1050 W
1050 W
IP Protection
IP 32
IP 32
IP 32
IP 32
Input voltage
Operating temperature
Dimensions mm (“)
Weight kg (lbs)
295 x 206 x 86
295 x 206 x 86
356 x 206 x 99
356 x 206 x 99
(11.6 x 8.1 x 3.4)
(11.6 x 8.1 x 3.4)
(14.0 x 8.1 x 3.9)
(14.0 x 8.1 x 3.9)
2,4 (5.3)
2,6 (5.7)
4 (8.8)
4 (8.8)
INDEX
UF
LE
X
BATTERY CHARGERS AND INVERTERS
2.17
WHISPER POWER® - BATTERY CHARGERS AND INVERTERS
WP- SINE SERIES INVERTERS
■
■
■
■
■
■
■
■
Pure sine wave output, high frequency switching
Perfect for any load
Extremely powerful: 400, 1000 or 2000W power output
Compact, light and silent
Full overload and over temperature protection
Plug n’play: USB port to charge tablets and smart phones
Peak power is 200% than nominal
Built-in LED display for DC and AC side (for 1000 & 2000W models)
MODEL
WP-SINE 12/400
WP-SINE 12/1000
WP-SINE 12/2000
Part No.
68528 D
68529 F
68530 P
Input voltage
12V DC
12V DC
12V DC
Continuous power
400 VA*
1000 VA*
2000 VA*
AC output voltage
230V
230V
230V
Output frequency
50Hz
50Hz
50Hz
750mA
750mA
750mA
40 A
94 A
187 A
Dimensions
(LxPxH) mm (“)
175 x 200 x 89
(6.9x7.9x3.5)
185 x 319 x 90
(7.3x12.6x3.54)
240 x 420 x 115
(9.4x16.5x4.5)
Weight kg (lbs)
1,7 (3.7)
2,9 (6.4)
5,5 (12.1)
USB output 5V
Power Consumption
(Full Load)
* Peak power > 200%
WP COMBI SUPREME
BATTERY CHARGER AND 230V AC INVERTER
MODEL
WP-SUPREME
COMBI-12/1000-40
WP-SUPREME
COMBI-12/2000-55
Part No.
69052 J
69053 L
1000 W
2000 W
Peak power
2000 W
4000 W
Wave form
Pure sine (<3% THD)
Pure sine (<3% THD)
230VAC / 50Hz
230VAC / 50Hz
5V, 750mA
5V, 750mA
12.5VDC
12.5VDC
16 A
16 A
40 A
55 A
Gel, lead acid, AGM
Gel, lead acid, AGM
0°C to 40°C
0°C to 40°C
230x478x114 (9.0x18.9x4.5)
230x478x114 (9.0x18.9x4.5)
5,7 (12.6)
6,6 (14.6)
Continous power
output
High quality product combining a powerful
battery charger with a pure sine HF inverter in
a compact single unit.
Output voltage
■ Detachable remote on/off display, supplied
with data cable
■ Schuko socket
■ USB outlet for tablets and smart phones
■ Ideal for solar, marine and RV applications
■ Auto switching grid/inverter supply power
■ Fully automatic three-stage charge method
■ Max current input from grid tunable (8-1016 amps)
Battery nominal
USB outlet
voltage
Transfer Switch
Max current
battery charger
Battery type
Operating
temperature
Dimensions mm (“)
Weight kg (lbs)
INDEX
UF
LE
X
WHISPER POWER - ACCESSORIES
®
WBI SERIES
LOW VOLTAGE DROP BATTERY ISOLATOR
The WBI Series low voltage drop battery isolators have a negligible voltage drop,
therefore are especially suitable for charging multiple battery banks with charge
equipment whose charge voltage cannot be adjusted.
WBI
WVG-200
BATTERY ISOLATOR VOLTAGE GUARD
The Voltage Guard increases battery bank life by protecting the batteries against
damage by excessive discharge or overvoltage charge
WVG
WVG -200 - 68270 P - Voltage Guard
WBL-120
MICROPROCESSOR CONTROLLED BATTERY LINK
■
■
■
■
Simultanously charging of two batteries
Intelligent battery monitor function
Safe battery connect algorithm
Additional power boost by start assist function
ACCESSORIES
2.18
68268 D - WBI 150-2 IG (two output)
68269 F - WBI 150-3 IG (three output)
WBL
WBL -120 - 68271 S - Battery link
DC-DC CONVERTERS
MC SERIES – COMMON GROUND NOT ISOLATED CONVERTERS
■
■
■
■
■
High class switched mode technology
Electronically controlled, stable and uniform output voltage
Temperature-controlled ventilation, short-circuit protection etc.
MC Series converters cannot be connected in parallel (see MG Series)
The negative pole of the battery converter is connected to ground
MC
MC SERIES
Part No.
Conversion
Current
MC 24/12-08
MC 24/12-12
MC 24/12-20
MC 24/12-30
MC 12/24-10
68535 A
68536 C
68537 E
68538 G
68539 J
24 V to 12 V
24 V to 12 V
24 V to 12 V
24 V to 12 V
24 V to 12 V
8A
12 A
20 A
30 A
10 A
MG SERIES – ISOLATED CONVERTERS
■ High class switched mode technology
■ Galvanic isolation between battery and DC output to eliminate interference
■ The negative pole of the battery converter is connected to ground
MG SERIES
Part No.
Conversion
Current
MG 24/12-16-i
MG 24/12-30-i
MG 48/12-30-i
MG 48/12-08-i
MG 24/24-15-i
68540 T
68541 V
68542 X
68543 Z
68544 B
24 V to 12 V
24 V to 12 V
48 V to 12 V
48 V to 12 V
24 V to 24 V
16 A
30 A
30 A
8A
15 A
INDEX
UF
LE
X
BATTERY MONITORS
2.19
WHISPER POWER® - WBM HIGH PRECISION
BATTERY MONITORS
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Accurate energy monitoring of one or two battery banks
No sudden empty batteries: precise ‘time remaining’ indicator (hrs, min)
Calculation of Amp hours consumed
Two battery inputs
Displays voltage, current, consumed Amp hours, remaining battery
capacity and ‘time remaining’
State of charge indicator in %
Large backlight LC display
Fully programmable alarm relays
Shunt selection capability enables flexible system integration
Stores a wide range of historical events in internal memory
Splash proof front panel
500 Amp shunt included
Easy to use, plug and play installation
CE and e-mark certified
WBM
WBM-Basic
WBM-Pro
WBM-Pro HV
Part No.
68272 U
68273 W
68274 Y
Supply voltage range
9.35 VDC
9.35 VDC
14,70 VDC
Input voltage range
(auxiliary battery)
2.35 VDC
2.35 VDC
2.35 VDC
Input voltage range
(main battery)
0.35 VDC
0.35 VDC
20.35 VDC
Input current range
-999..+999 A
-999..+999 A
-999..+999 A
20..999 Ah
20..999 Ah
20..999 Ah
Battery capacity range
500A/50mV WBM shunt
WBM ACCESSORIES
68275
68276
68277
68278
68279
INDEX
WBM
A – 6 m Connection accessory kit
C – 12 m Connection accessory kit
E – 3 m Quick Connection kit
G – 10 m temperature sensor kit
J – 500A/50mV shunt
UF
LE
X
VICTRON ENERGY® - CHARGE CONTROLLERS
BLUESOLAR MPPT 75/15 - 100/15 CHARGE CONTROLLERS
■ Ultra-fast Maximum Power Point Tracking (MPPT): Especially in case of a
clouded sky, when light intensity is changing continuously, an ultra fast
MPPT controller will improve energy harvest by up to 30% compared to
PWM charge controllers and by up to 10 % compared to slower MPPT
controllers
■ Load output: Over-discharge of the battery can be prevented by
connecting all loads to the load output. The load output will disconnect
the load when the battery has been discharged to a preset voltage
■ BatteryLife: intelligent battery management. The BatteryLife algorithm
will monitor the state of charge of the battery and, if needed, day by
day slightly increase the load disconnect level (i. e. disconnect the load
earlier) until the harvested solar energy is sufficient to recharge the
battery to nearly the full 100%
■ Resin encapsulated electronics
■ Programmable battery charge algorithm
■ Day/night timing and light dimming option
CHARGE CONTROLLERS
2.20
BLUESOLAR MPPT 100/30 - 75/50 - 100/50 CHARGE CONTROLLERS
■ Ultra-fast Maximum Power Point Tracking (MPPT): The BlueSolar 100/30MPPT charge controller is able to charge a lower nominal-voltage
battery from a higher nominal voltage PV array. The controller will
automatically adjust to a 12 or 24V nominal battery voltage
■ Outstanding conversion efficiency: No cooling fan. Maximum efficiency
exceeds 98%. Full output current up to 40°C (104°F). No cooling fan
■ Advanced Maximum Power Point Detection in case of partial shading
conditions: If partial shading occurs, two or more maximum power
points may be present on the power-voltage curve. Conventional MPPT’s
tend to lock to a local MPP, which may not be the optimum MPP. The
innovative BlueSolar algorithm will always maximize energy harvest by
locking to the optimum MPP
■ Flexible charge algorithm: Fully programmable charge algorithm (see
the software page on our website), and eight preprogrammed
algorithms, selectable with a rotary switch
■ Extensive electronic protection: Over-temperature protection and power
derating when temperature is high. PV short circuit and PV reverse
polarity protection. PV reverse current protection
MODEL
75/15
Part No.
68399 V
100/15
100/30
75/50
100/50
69881 B
69464 J
69055 R
69265 C
Battery voltage
12V/24V auto detected
Maximum output current
15 A
Maximum PV power
200W(12V) - 400W (24V)
Maximum PV open circuit voltage
75 V
700W(12V) - 1400W(24V)
75 V
100 V
100mA
Low voltage load disconnect
11,1V/22,2Vo11,8V/23,6VoralgorithmBatteryLife
Low voltage load reconnect
13,1V/26,2V o 14V/28V or algorithm BatteryLife
Operating temperature
Weight kg (lbs)
440W(12V) - 880W(24V)
98%
Self-consumption
Dimensions mm (“)
50 A
100 V
Maximum efficiency
Protection class
30 A
-
-
-
-
-
-30°C ÷ +60°C
IP43 (electronic components) - IP22 (connections)
100 x 113 x 40 (3.9 x 4.5 x 1.6)
130 x 186 x 70 (5.1 x 7.3 x 2.8)
0,5 (1.1)
1,25 (2.8)
INDEX
UF
LE
X
VICTRON ENERGY®
MPPT CHARGE CONTROLLERS
BLUESOLAR MPPT 150/70 & 150/85 CHARGE CONTROLLERS
CHARGE CONTROLLERS
2.21
■ PV voltage up to 150V: The BlueSolar MPPT 150/70 and 150/85 charge
controllers will charge a lower nominal-voltage battery from a higher
nominal voltage PV array. The controller will automatically adjust to a
12, 24, 36, or 48 V nominal battery voltage
■ Ultra-fast Maximum Power Point Tracking (MPPT): Especially in case of a
clouded sky, when light intensity is changing continuously, an ultra fast
MPPT controller will improve energy harvest by up to 30% compared to
PWM charge controllers and by up to 10% compared to slower MPPT
controllers
■ Advanced Maximum Power Point Detection in case of partial shading
conditions: If partial shading occurs, two or more maximum power
points may be present on the power-voltage curve. Conventional MPPT’s
tend to lock to a local MPP, which may not be the optimum MPPT. The
innovative BlueSolar algorithm will always maximize energy harvest by
locking to the optimum MPP
■ Exceptional conversion efficiency: max efficiency higher than 98%. Full
output current even with temperatures exceeding 40°C (104°F)
■ Outstanding conversion efficiency: Maximum efficiency exceeds 98%.
Full output current up to 40°C (104°F)
■ Programmable auxiliary relay: For alarm or generator start purposes
■ Extensive electronic protection: Over-temperature protection and power
derating when temperature is high. PV short circuit and PV reverse
polarity protection. Reverse current protection
■ Certifications: EN60335-1; EN61000-6-1; EN61000-6-3
MODEL
150/70
150/85
Part No.
69899 X
69417 Z
Nominal battery voltage
Rated charge current
Maximum PV input power
12V/24V/36V/48V
70 A (at 40°C)
12V:1000W - 24V:2000W
36V:3000W - 48V:4000W
145V start-up and operating maximum
Battery voltage plus 7 Volt to start Battery voltage plus 2 Volt operating
Self-consumption
12V:0,55W / 24V:0,75W / 36V:0,9W / 48V:1,0W
Efficiency at full load
12V:95% / 24V:96,5% / 36V:97% / 48V:97,5%
Parallel operation
Yes, through VE.Can. Max 25 units in parallel
Remote on/off
NO
YES
Operating temperature
-40°C ÷ +60°C
Humidity (non condensing)
Max. 95%
Protection class
Cooling
Dimensions mm (“)
Weight kg (lbs)
INDEX
12V:1200W - 24V:2400W
36V:3600W - 48V:4850W
150V absolute maximum coldest conditions
Maximum PV open circuit voltage
Minimum PV voltage
85 A (at 40°C)
IP 20
Natural convection
Low noise fan assisted
350 x 160 x 135 (13.8 x 6.3 x 5.3)
5 (11.0)
UF
LE
X
VICTRON ENERGY® - PWM-PRO
CHARGE CONTROLLERS
■ Programmable: The BlueSolar PWM-Pro series is ready for use with its
default settings. It also is fully programmable with help of the dedicated
BlueSolar Pro Remote Panel.
BLUE SOLAR PWM AND PWM-PRO CHARGE CONTROLLERS
BlueSolar PWM-Pro10A
BlueSolar Pro Remote Panel
(optional) - 69450 X
MODEL
PWM-PRO
12/24-10
PWM-PRO
12/24-20
PWM-PRO
12/24-30
Part No.
69446 G
69368 N
69452 B
Voltage
12 V
24 V
12 V
24 V
12 V
24 V
Rated load current
10 A
10 A
20 A
20 A
30 A
30 A
Maximum solar voltage
28 V
55 V
55 V
28 V
Self consumption
<10mA
28 V
<10mA
55 V
<10mA
Low voltage load disconnect
11,1V / 22,2V
11,1V / 22,2V
11,1V / 22,2V
Low voltage load reconnect
12,6V / 25,2V
12,6V / 25,2V
12,6V / 25,2V
Operating temperature
-20 to + 50°C
Dimensions mm (“)
Weight kg (lbs)
-20 to + 50°C
-20 to + 50°C
70 x 138 x 37
82 x 160 x 48
100 x 200 x 57
(2.8 x 5.4 x 1.5)
(3.2 x 6.2 x 1.8)
(3.9 x 7.9 x 2.2)
0,13 (0.3)
0,3 (0.7)
CHARGE CONTROLLERS
2.22
■ Low cost PWM controller
■ Lighting control function, fully programmable with the Remote Panel
(optional) - 69450 X
■ Three stage battery charging (bulk, absorption, float), fully
programmable with the Remote Panel (optional)
■ Integrated battery monitor function (Remote Panel needed to display
state of charge)
■ Load output with low voltage disconnect and manual control (default
setting)
■ Optional external temperature sensor - 69898 V
■ Load output protected against over load and short circuit
■ Protected against reverse polarity connection of the solar panels and/or
battery
■ Protection category: IP30
■ Certifications: IEC62103-1, EN61000-6-1, EN 61000-6-3, ISO 7637-2
■ Warranty: 5 years
0,5 (1.1)
INDEX
UF
LE
X
VICTRON ENERGY® - BATTERY CHARGERS
BLUE POWER BATTERY CHARGER IP20
Universal input: 90-265 VAC or 90-350 VDC
The charger will operate on whatever supply is available
Standard features
BATTERY CHARGERS
2.23
Adaptive 4-stage charge characteristic: bulk- absorption-float-storage.
The Blue Power charger features a microprocessor controlled ‘adaptive’
battery management. The ‘adaptive’ feature will automatically optimise the
charging process relative to the way the battery is been used.
MODEL
PART No.
12/7 IP20
65626 M
12/15 IP20
65571 N
12/25 IP20
67914 D
24/5 IP20
65628 S
24/8 IP20
65577 B
24/12 IP20
68372 Y
INPUT VOLTAGE
RANGE
180-265V AC / 45-65 Hz
250-350V DC / 45-65 Hz
180-265V AC / 45-65 Hz
250-350V DC / 45-65 Hz
180-265V AC / 45-65 Hz
250-270V DC / 45-65 Hz
180-265V AC / 45-65 Hz
250-350V DC / 45-65 Hz
180-265V AC / 45-65 Hz
250-350V DC / 45-65 Hz
180-265V AC / 45-65 Hz
250-350V DC / 45-65 Hz
BLUE POWER IP 20
CHARGE VOLTAGE
ABSORPTION
CHARGE
CURRENT
14,4V DC
7A
14,4V DC
15 A
14,4V DC
25 A
28,8V DC
5A
28,8V DC
8A
28,8V DC
12 A
DIMENSIONS
H x L x P mm (“)
WEIGHT
kg (lbs)
60x90x210
1.3
(2.4x3.5x8.3)
(2.8)
60x90x210
1.3
(2.4x3.5x8.3)
(2.8)
66x90x235
1.3
(2.6x3.5x9.3)
(2.8)
60x90x210
1.3
(2.4x3.5x8.3)
(2.8)
60x90x210
1.3
(2.4x3.5x8.3)
(2.8)
66x90x235
1.3
(2.6x3.5x9.3)
(2.8)
BLUE POWER BATTERY CHARGER IP22
With up to 94% efficiency, these chargers generate up to four times less heat
when compared to the industry standard. And once the battery is fully
charged, power consumption reduces to 0,5 Watt, some five to ten times
better than the industry standard.
Standard features
Adaptive 6-stage charge algorithm: test-bulk–absorption-recondition–float–
storage. Storage Mode: less maintenance and aging when the battery is not in
use. Also charges Li-ion batteries. NIGHT and LOW setting: the output current
is reduced to max. 25% of the nominal output and the charger will be totally
noiseless. Protected against overheating. Eleven LED’s for Status indication.
BLUE POWER IP 22
PART No.
INPUT VOLTAGE
RANGE
CHARGE VOLTAGE
ABSORPTION
CHARGE
CURRENT
12/30 IP22 (1)
69352 X
180-268V AC / 45-65 Hz
Variable*
30A
12/30 IP22 (3)
69109 M
180-268V AC / 45-65 Hz
Variable*
30A
24/15 IP22 (1)
69353 Z
180-268V AC / 45-65 Hz
Variable*
15A
24/15 IP22 (3)
69354 B
180-268V AC / 45-65 Hz
Variable*
15A
MODEL
DIMENSIONS
H x W x D mm (“)
WEIGHT
kg (lbs)
235x108x65
1.4
(9.2x4.2x2.6)
(3.1)
235x108x65
1.4
(9.2x4.2x2.6)
(3.1)
235x108x65
1.4
(9.2x4.2x2.6)
(3.1)
235x108x65
1.4
(9.2x4.2x2.6)
(3.1)
* Absorption: 12V Normal 14,4V, High 14,6V, Li-ion 14,2V – 24V Normal 28,8V, High 29,2V, Li-ion 28,4V
Float: 12V Normal 13,8V, High 13,8V, Li-ion 13,35V – 24V Normal 27,6V, High 27,6V, Li-ion 26,7V
Storage: 12V Normal 13,2V, High 13,8V, Li-ion n.d. – 24V Normal 26,4V, High 26,4V, Li-ion: n.d
INDEX
UF
LE
X
VICTRON ENERGY® - BATTERY CHARGERS
BLUE POWER BATTERY CHARGERS - WATERPROOF - IP 67
2.24
BLUE POWER IP 67
MODEL
PART No.
INPUT VOLTAGE
RANGE
CHARGE
VOLTAGE
CHARGE
CURRENT
12/7 IP67
66009 S
180-265V AC / 45-65 Hz
14,4V DC
7A
12/13 IP67
69900 C
180-265V AC / 45-65 Hz
14,4V DC
13 A
12/17 IP67
68932 L
180-265V AC / 45-65 Hz
14,4V DC
17 A
12/25 IP67
68900 X
180-265V AC / 45-65 Hz
14,4V DC
25 A
24/5 IP67
69351 V
180-265V AC / 45-65 Hz
26,4V DC
5A
24/8 IP67
68901 Z
180-265V AC / 45-65 Hz
28,8V DC
8A
24/12 IP67
69019 L
180-265V AC / 45-65 Hz
28,8V DC
12 A
DIMENSIONS
H x L x P mm (“)
WEIGHT
kg (lbs)
85x211x60
1.1
(3.4x8.3x2.4)
(2.4)
85x211x60
1.8
(3.4x8.3x2.4)
(4.0)
99x219x65
2.4
(3.9x8.6x2.6)
(5.3)
99x219x65
2.4
(3.9x8.6x2.6)
(5.3)
85x211x60
1.1
(3.4x8.3x2.4)
(2.4)
99x219x65
2.4
(3.9x8.6x2.6)
(5.3)
99x219x65
2.4
(3.9x8.6x2.6)
(5.3)
BATTERY CHARGERS
■ Power supply range : 180-265 VAC
■ Completely encapsulated body. Water, oil or dirt will not damage the Blue
Power IP67 charger. The casing is made of cast aluminium and the
electronics are moulded in resin.
■ Top level efficiency: with 92% efficiency or better, these chargers waste
three to four times less heat
■ Adaptive 4-stage charge algorithm: bulk – absorption – float – storage. The
Blue Power charger features a microprocessor controlled ‘adaptive’ battery
management. This feature will automatically optimise the charging process
relative to the way the battery is being used.
PHOENIX BATTERY CHARGERS - MICROPROCESSOR CONTROL
Phoenix automatic battery chargers with microprocessor can suit perfectly and
automatically the charge for the batteries. During the 4 charge stages
(bulk-absorption-float-storage) the battery charger will maintain the optimal
charge depending on battery status and use.
Standard features
Aluminium epoxy powder coated case with drip shield, circuit board protection
with an acrylic coating, built-in temperature sensors, forced cooling, protection
against output short circuit and over temperature, battery temperature sensor,
compensation on cable voltage fall, two full charge output and one oputput
limited to 4 A, RS-485 data port for computer connection, feeder function.
PHOENIX
MODEL
PART No.
INPUT VOLTAGE
CHARGE
VOLTAGE
RANGE
(Absorption)
CHARGE
CURRENT(1)
Ah
BATTERIES
DIMENSIONS
H x L x P mm (“)
WEIGHT
kg (lbs)
12/30
64900 A
90-265V AC / 45-65 Hz
14,4V DC
30 A (x2) + 4 A
100/400
350x200x108 (13.8x7.9x4.3)
3.8 (8.4)
12/50
64901 C
90-265V AC / 45-65 Hz
14,4V DC
50 A (x2) + 4 A
200/800
350x200x108 (13.8x7.9x4.3)
3.8 (8.4)
24/16
64902 E
90-265V AC / 45-65 Hz
28,8V DC
16 A (x2) + 4 A
100/200
350x200x108 (13.8x7.9x4.3)
3.8 (8.4)
24/25
64903 G
90-265V AC / 45-65 Hz
28,8V DC
25 A (x2) + 4 A
100/400
350x200x108 (13.8x7.9x4.3)
3.8 (8.4)
(1) 100 % output up to 40°C, 80% nominal output at 50°C and 60% of nominal at 60°C
INDEX
UF
LE
X
VICTRON ENERGY® - BATTERY CHARGERS
CENTAUR BATTERY CHARGERS: analogic control
BATTERY CHARGERS
2.25
Centaur battery chargers have automatic three stage IUoUo charging.
All models are designed to operate all over the world without any
adjustment needed on input voltage range or frequency. They have
three isolated outputs to simultaneously charge 3 battery banks. Each
output is capable to supply the full rated current.
Standard features
Aluminium epoxy powder coated case with drip shield, circuit board
protection with an acrylic coating, built-in temperature sensors, forced
cooling, protection against output short circuit and over temperature,
analog ammeter, DIP switch for selection of charge/float voltage for
flooded lead-acid, gel or AGM batteries, Europe CE certification and
U.S.A. UL certification. Temperature range: -20 + 60° C
CENTAUR
MOD.
Part No.
INPUT VOLTAGE
RANGE
CHARGE VOLT CHARGE
ABSORPTION CURRENT(1)
Ah
BATTERIES
12/20
64886 K
90-265V AC / 45-65 Hz
14.3 VDC
20 A
80 /200
12/30
64887 M
90-265V AC / 45-65 Hz
14.3 VDC
30 A
120/300
12/40
64888 P
90-265V AC / 45-65 Hz
14.3 VDC
40 A
160/400
12/50
64889 S
90-265V AC / 45-65 Hz
14.3 VDC
50 A
200/500
12/60
64890 A
90-265V AC / 45-65 Hz
14.3 VDC
60 A
240/600
12/80
64891 C
90-265V AC / 45-65 Hz
14.3 VDC
80 A
320/800
12/100
64892 E
90-265V AC / 45-65 Hz
14.3 VDC
100 A
400/1000
24/16
64894 J
90-265V AC / 45-65 Hz
28.5 VDC
16 A
45/150
24/30
64895 L
90-265V AC / 45-65 Hz
28.5 VDC
30 A
120/300
24/40
64896 N
90-265V AC / 45-65 Hz
28.5 VDC
40 A
160/400
24/60
64897 R
90-265V AC / 45-65 Hz
28.5 VDC
60 A
240/600
(1) 100 % output up to 40°C, 80% nominal output at 50°C and 60% of nominal at 60°C
INDEX
DIMENSIONS
H x L x P mm (“)
WEIGHT
kg (lbs)
355 x 215 x 110
3.8
(14.0 x 8.5 x 4.3)
(8.4)
355 x 215 x 110
3.8
(14.0 x 8.5 x 4.3)
(8.4)
426 x 239 x 135
5
(16.8 x 9.4 x 5.3)
(11)
426 x 239 x 135
5
(16.8 x 9.4 x 5.3)
(11)
426 x 239 x 135
5
(16.8 x 9.4 x 5.3)
(11)
505 x 255 x 130
12
(19.9 x 10.0 x 5.2)
(26.4)
505 x 255 x 130
12
(19.9 x 10.0 x 5.2)
(26.4)
355 x 215 x 110
3.8
(14.0 x 8.5 x 4.3)
(8.4)
426 x 239 x 135
5
(16.8 x 9.4 x 5.3)
(11)
505 x 255 x 130
12
(19.9 x 10.0 x 5.2)
(26.4)
505 x 255 x 130
12
(19.9 x 10.0 x 5.2)
(26.4)
UF
LE
X
VICTRON ENERGY® - BATTERY CHARGERS
SKYLLA BATTERY CHARGERS - microprocessor control
Skylla battery chargers have automatic three stage IUoUo charging.
They are designed for use on battery banks with 24Vcc / 48Vcc. They
have two outputs, two full charge output and one oputput limited to
4 A.
2.26
SKYLLA
BATTERY CHARGERS
Standard features
Aluminium epoxy powder coated case with drip shield, circuit board
protection with an acrylic coating, built-in temperature sensors, forced
cooling, protection against output short circuit and over temperature,
battery temperature sensor, compensation on cable voltage fall, feeder
function.
SKYLLA GMDSS BATTERY CHARGERS
Power supply: The Skylla TG has proven itself to be an excellent
battery charger and power supply for GMDSS applications. However,
when using a standard Skylla charger, additional equipment is needed
to perform the monitoring and alarm functions required for GMDSS.
No adjustments needed: The whole system is ‘click and go’: the panels
are pre-programmed for GMDSS functionality. A simple, intuitive menu
allows changing of settings if required.
Battery time to go: The Skylla GMDSS charger has a built-in battery
controller. The capacity of the battery is fully monitored so the panel
can even indicate the ’time to go’ in case of a power supply black out.
SKYLLA GMDSS
MOD.
Part No.
INPUT VOLTAGE
RANGE
TG 24/30
64904 J
185-265V AC / 45-65 Hz
TG 24/30
GMDSS
66036 V
TG 24/50
CHARGE
VOLTAGE
CHARGE
CURRENT(1)
Ah
BATTERIES
DIMENSIONS
H x L x P mm (“)
WEIGHT
kg (lbs)
28.5 VDC
30 A + 4 A
150/300
365 x 250 x 147
(14.4 x 9.9 x 5.8)
5.5
(12.1)
185-265V AC / 45-65 Hz
28.5 VDC
30 A + 4 A
150/300
365 x 250 x 147
(14.4 x 9.9 x 5.8)
6
(13.2)
64905 L
185-265V AC / 45-65 Hz
28.5 VDC
50 A + 4 A
250/500
365 x 250 x 147
(14.4 x 9.9 x 5.8)
5.5
(12.1)
TG 24/50
GMDSS
67918 M
90-265V AC / 45-65 Hz
28.5 VDC
50 A + 4 A
250/500
365 x 250 x 147
(14.4 x 9.9 x 5.8)
6
(13.2)
TG 24/50
3 phases
68895 H
320-450V AC / 45-65 Hz
28.5 VDC
50 A + 4 A
250/500
365 x 250 x 257
(14.4 x 10.2 x 10.1)
13
(28.7)
TG 24/80
64906 N
185-265V AC / 45-65 Hz
28.5 VDC
80 A + 4 A
400/800
365 x 250 x 257
(14.4 x 9.9 x 10.1)
10
(22)
TG 24/100
64907 R
185-265V AC / 45-65 Hz
28.5 VDC
100 A + 4 A
500/1000
365 x 250 x 257
(14.4 x 9.9 x 10.1)
10
(22)
TG 24/100
3 fasi
64908 T
320-450V AC / 45-65 Hz
28.5 VDC
100 A + 4 A
500/1000
515 x 260 x 265
(20.0 x 10.2 x 5.8)
23
(48)
TG 48/25
64909 V
185-265V AC / 45-65 Hz
57 VDC
25 A + 4 A
125/250
365 x 250 x 147
(14.4 x 9.9 x 5.8)
5.5
(12.1)
TG 48/50
64910 D
185-265V AC / 45-65 Hz
57 VDC
50 A + 4 A
250/500
365 x 250 x 257
(14.4 x 9.9 x 10.1)
10
(22)
(Absorption)
(1) 100 % output up to 40°C, 80% nominal output at 50°C and 60% of nominal at 60°C.
OPTIONAL: Skylla control panel - 65007 G
INDEX
UF
LE
X
INVERTERS
2.27
VICTRON ENERGY® - INVERTERS
PHOENIX INVERTERS
Developed for professional duty, Phoenix pure sine
inverters are suitable for the widest range of
applications.
The design criteria have been to produce a true sine
wave inverter with optimised efficiency without
compromise in performance. Employing hybrid HF
technology, the result is a top quality product with
compact dimensions, light in weight and capable of
supplying power, problem-free, to any load. A unique
feature of the SinusMax technology is very high startup power. Phoenix inverters, in fact, are well suited to
power up difficult loads such as: refrigeration
compressors, electric motors and similar applications.
Conventional high frequency technology does not offer
such extreme performance.
PHOENIX up to 1200 VA
PHOENIX INVERTER up to 1200 VA
Standard features
Aluminium epoxy powder coated case with drip shield,
circuit board protection with an acrylic coating, forced
cooling with temperature sensors, remote connector,
battery cables (1.5 m), output short circuit protection,
over temperature protection.
INPUT VOLTAGE
RANGE DC
CONT. OUTPUT
POWER - VA(1)
PEAK
POWER-W
MAX. EFFIC.
%
DIMENSIONS
H x L x P mm (“)
WEIGHT
kg (lbs)
12/180 Schuko
64911 F
10,5 – 15,5
180
350
91
72x132x200 (2.8x5.2x7.9)
2.7 (5.9)
12/350 Schuko
64912 H
10,5 – 15,5
350
700
90
72x155x237 (2.8x6.1x9.3)
3.5 (7.7)
12/800 Schuko
68056 M
9,2 – 17,3
800
1600
91
104x194x305 (4.1x7.6x11.9)
6.5 (14.3)
12/1200 Schuko
68893 D
9,2 – 17,3
1200
2400
92
104x194x305 (4.1x7.6x11.9)
8.5 (18.7)
24/180 Schuko
64914 M
21,0 – 31,0
180
350
92
72x132x200 (2.8x5.2x7.9)
2.7 (5.9)
24/350 Schuko
64915 P
21,0 – 31,0
350
700
91
72x155x237 (2.8x6.1x9.3)
3.5 (7.7)
24/800 Schuko
68100 M
18,4 – 34,0
800
1600
93
104x194x305 (4.1x7.6x11.9)
6.5 (14.3)
24/1200 Schuko
68894 F
18,4 – 34,0
1200
2400
94
104x194x305 (4.1x7.6x11.9)
8.5 (18.7)
48/350 Schuko
69457 M
42,0 – 62,0
350
700
90
72x155x237 (2.8x6.1x9.3)
3.5 (7.7)
48/800 Schuko
69188 L
36,8 – 68,0
800
1600
94
104x194x305 (4.1x7.6x11.9)
6.5 (14.3)
48/1200 Schuko
69458 P
36,8 – 68,0
1200
2400
94
104x194x305 (4.1x7.6x11.9)
8.5 (18.7)
(1) Continuous output power at 25° C
OUTPUT: 230V AC ± 2% - 50 Hz ± 2%
PART No.
MODEL
INDEX
PHOENIX up to 1200 VA
UF
LE
X
VICTRON ENERGY® - INVERTERS
PHOENIX INVERTERS 1200 VA - 5000 VA
Developed for professional duty, the Phoenix range of inverters is suitable for
the widest range of applications. The design criteria have been to produce a
true sine wave inverter with optimized efficiency but without compromise in
performance. A unique feature of the SinusMax technology is very high startup power. Conventional high frequency technology does not offer such
extreme performance. Phoenix nverters, however, are well suited to power up
difficult loads such as refrigeration compressors, electric motors and similar
appliances.
Up to 6 units inverters can operate in parallel to achieve higher power output.
Six 24/5000 units, for example, will provide 24kW / 30kVA output power.
Operation in 3-phase configuration is also possible.
INVERTERS
To transfer the load to another AC source: the automatic transfer switch.
If an automatic transfer switch is required we recommend using the MultiPlus
inverter/charger instead. The switch is included in these products and the
charger function of the MultiPlus can be disabled. Computers and other
electronic equipment will continue to operate without disruption because the
MultiPlus features a very short switchover time (less than 20 milliseconds).
2.28
PHOENIX 1200 VA
Computer interface: All models have a RS-485 port. All you need to connect to
your PC is our MK2 interface (see under accessories). This interface takes care
of galvanic isolation between the inverter and the computer, and converts
from RS-485 to RS-232.
Standard features
Aluminum epoxy powder coated case with drip shield, circuit board
protection with an acrylic coating, forced cooling with temperature
sensors, protection against: output short circuit, overload, low battery
voltage, reverse polarity, reverse voltage on output, input voltage
ripple, high temperature.
Relay multifunction.
INPUT VOLTAGE CONT OUTPUT
PEAK
PART No. RANGE V DC POWER VA(1) POWER W
MAX.
EFFIC %
DIMENSIONS
H x L x P mm (“)
WEIGHT
kg (lbs)
C12/1200
64918 W
9,5 – 17,0
1200
2400
92
375x214x110 (14.7x8.4x4.3)
10 (22)
C12/1600
64919 Y
9,5 – 17,0
1600
3000
92
375x214x110 (14.7x8.4x4.3)
10 (22)
C12/2000
66407 E
9,5 – 17,0
2000
4000
92
520x255x125 (20.5x10.0x4.9)
13 (28.6)
12/3000
66037 X
9,5 – 17,0
3000
6000
93
362x258x218 (14.2x10.1x8.6)
18 (39.7)
C24/1200
64921 J
19,0 – 33,0
1200
2400
94
375x214x110 (14.7x8.4x4.3)
10 (22)
C24/1600
64922 L
19,0 – 33,0
1600
3000
94
375x214x110 (14.7x8.4x4.3)
10 (22)
C24/2000
66408 G
19,0 – 33,0
2000
4000
92
520x255x125 (20.5x10.0x4.9)
13 (28.6)
24/3000
64923 N
19,0 – 33,0
3000
6000
94
362x258x218 (14.2x10.1x8.6)
18 (39.7)
24/5000
66244 C
19,0 – 33,0
5000
10.000
94
444x328x240 (17.5x12.9x9.4)
30 (66.1)
48/3000
64926 V
38,0 – 66,0
3000
6000
95
362x258x218 (14.2x10.1x8.6)
18 (39.7)
48/5000
67257 T
38,0 – 66,0
5000
10.000
95
444x328x240 (17.5x12.9x9.4)
30 (66.1)
OUTPUT: 230V AC ± 2% - 50 Hz ± 2%
MODEL
(1) Continuous output power at 25°C
All models are suitable for parallel (max 6 parallel units) and 3-phase operation
OPTIONAL: control panel Phoenix CC Inverter – 65006 E
INDEX
UF
LE
X
VICTRON ENERGY® - MULTI-FUNCTION
INVERTER/BATTERY CHARGERS
QUATTRO 5kVA
Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC sources, for example
shore-side power and a generator, or two generators: the Quattro will
automatically connect to the active source.
Virtually unlimited power thanks to parallel operation
Up to 10 Quattro’s can operate in parallel. Ten units 24/5000/120, for example,
will provide 40kW / 50kVA output power and 1200 Amp charging capacity.
Three phase capability
Three units can be configured for three-phase output and up to 6 sets of three
units can be parallel connected to provide 75kW / 90kVA inverter power and
more then 2000 Amp charging capacity.
Power Assist – Boosting shore or generator power
Where peak power is so often required only for a limited period, the Quattro makes sure that insufficient shore or generator power is
immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. With
this feature, problems related to insufficient shore or generator power are solved once and for all. Air conditioning, an electric hob, a
washing machine, a dish washer, a 16A shore connection, or even less then16A, will not limit you in any way.
MODEL
INPUT
PART No. VOLTAGE
RANGE
CONT.
OUTPUT
POWER (1)
BATTERY CHARGE
INPUT VOLTAGE
CHARGE
RANGE
CURRENT
DIMENSIONS
H x L x P mm (“)
WEIGHT
kg (lbs)
12/3000/120-50-30
69355 D
9,5 - 17
3000
14.4 VDC (absorption)
13.8 VDC (float)
120 A + 4 A
362 x 258 x 218
(14.3 x 10.1 x 8.6)
19,0
(41.8)
12/5000/220-100-100
67437 V
19 - 33
5000
14.4 VDC (absorption)
13.8 VDC (float)
220 A + 4 A
470 x 350 x 280
(18.5 x 13.8 x 11)
34,0
(74.9)
24/3000/70-50-30
69356 F
19 - 33
3000
28.8 VDC (absorption)
27.6 VDC (float)
70 A + 4 A
362 x 258 x 218
(14.3 x 10.1 x 8.6)
19,0
(41.8)
24/5000/120-100-100
66097 S
19 - 33
5000
28.8 VDC (absorption)
27.6 VDC (float)
120 A + 4 A
444 x 328 x 240
(17.4 x 12.9 x 9.4)
30,0
(66.1)
24/8000/200-100-100
67338 T
19 - 33
8000
57.6 VDC (absorption)
55.2 VDC (float)
110 A + 4 A
470 x 350 x 280
(18.5 x 13.8 x 11)
45,0
(99.2)
48/5000/70-100-100
68847 W
38 - 66
5000
57.6 VDC (absorption)
55.2 VDC (float)
70 A
444 x 328 x 240
(17.4 x 12.9 x 9.4)
30,0
(66.1)
48/8000/110-100-100
69456 K
38 - 66
8000
57.6 VDC (absorption)
55.2 VDC (float)
110 A
470 x 350 x 280
(18.5 x 13.8 x 11)
41,0
(90.4)
48/10000/140-100-100
68973 B
38 - 66
10000
57.6 VDC (absorption)
55.2 VDC (float)
140 A
470 x 350 x 280
(18.5 x 13.8 x 11)
45,0
(99.2)
(1) Continuous output power at 25°C
INDEX
QUATTRO
5kVA
Power Control - Dealing with limited generator, shore-side or grid
power
The Quattro is a very powerful battery charger. It will therefore draw a lot of
current from the generator or shore-side supply (16A per Quattro at 230 VAC).
A current limit can be set for both AC inputs. The Quattro will then take
account of the other AC loads and use whatever is spare for charging, thus
preventing the generator or shore supply from being overloaded.
OUTPUT: 230V AC ± 2%
INVERTER/BATTERY CHARGERS
2.29
Two AC outputs
The main output has no-break functionality. In the event of a grid failure, or
shore or generator power being disconnected, the Quattro takes over the
supply to the connected loads. This happens so fast (less then 20 milliseconds)
that computers and other electronic equipment will continue to operate
without disruption. The second output is live only when AC source is
available. Loads that should discharge the battery, like a water heater for
example can be connected to this output.
UF
LE
X
VICTRON ENERGY® - MULTI-FUNCTION
INVERTER/BATTERY CHARGERS
MULTIPLUS
The MultiPlus is a powerful true sine wave inverter, a sophisticated battery
charger that features adaptive charge technology, and a high-speed AC transfer
switch in a single compact enclosure.
The MultiPlus is compatible with Lithium-ion batteries.
Double AC outputs
The main output features a no-break function: when the shore power or the
genset power fails, the MultiPlus takes charge of the active loads without
discontinuity. The second output is active only when an AC source is connected.
The loads that may discharge the batteries, like the boiler, shall be connected to
the second output.
Parallel operation and three-phase configuration
The MultiPlus are able to be installed in parallel up to 6 units. In addition to
parallel connection, three units of the same model can be configured for threephase output: up to 6 sets of three units can be parallel connected for a total
output of 75KW /90kVA and a current of 2000A.
Power Control
The MultiPlus is a very powerful battery charger, drawing high currents from the
genset or from the shore power (up to 10A per 5kVA Multi at 230 VAC). In order
to avoid any generator or shore overload, a current limit can be set through the
Multi Control Panel; this way the Multiplus will charge the battery with the
current not used from the others AC loads on board.
MULTIPLUS
Power Assist
In the event that the onboard load exceeds the available shore power, the inverter function works in parallel with the shore connection
to boost the total energy available and avoid overload. This works just the same with a generator.
Four stage adaptive charger and dual battery charging
The main output provides a powerful charge to the battery system by means of advanced “adaptive charge” software. The software
automatically tunes three charging stages in order to give the battery what it needs and to add a forth stage for long periods of float
charging. The second output is a float –only intended for engine start battery.
System configuration
After installation, the MultiPlus is ready to work. If settings have to be changed, this can be done with the DIP switch setting procedure.
Even parallel and 3-phase operation can be programmed with DIP switches. The VE.Net panel can be used as well for any setting
modification.
CONT.
OUTPUT
POWER (1)
C12/800/35-16
69358 K
9,5 – 17
800
C12/1200/50-16
69359 M
9,5 – 17
C12/1600/70-16
69360 W
C12/2000/80-30
BATTERY CHARGE
OUTPUT INPUT VOLTAGE CHARGE
RANGE
CURRENT
DIMENSIONS
H x L x P mm (“)
WEIGHT
kg (lbs)
35 A + 4 A
375x214x110 (14.7x8.4x4.3)
10 (22)
1200
50 A + 4 A
375x214x110 (14.7x8.4x4.3)
10 (22)
9,5 – 17
1600
70 A + 4 A
375x214x110 (14.7x8.4x4.3)
10 (22)
69361 Y
9,5 – 17
2000
80 A + 4 A
362x258x218 (14.2x10.1x8.6) 18 (39.7)
12/3000/120-16
69362 A
9,5 – 17
3000
120 A + 4 A
362x258x218 (14.2x10.1x8.6) 18 (39.7)
12/3000/120-50
69363 C
9,5 – 17
3000
120 A + 4 A
362x258x218 (14.2x10.1x8.6) 18 (39.7)
C24/800/16-16
69364 E
9,5 – 17
800
16 A + 4 A
362x258x218 (14.2x10.1x8.6) 18 (39.7)
C24/1200/25-16
69876 J
19 – 33
1200
25 A + 4 A
375x214x110 (14.7x8.4x4.3)
10 (22)
C24/1600/40-16
69365 G
19 – 33
1600
40 A + 4 A
375x214x110 (14.7x8.4x4.3)
10 (22)
C24/2000/50-30
69189 N
19 – 33
2000
50 A + 4 A
362x258x218 (14.2x10.1x8.6) 18 (39.7)
24/3000/70-16
69366 J
19 – 33
3000
70 A + 4 A
362x258x218 (14.2x10.1x8.6) 18 (39.7)
24/3000/70-50
69178 H
19 – 33
3000
70 A + 4 A
362x258x218 (14.2x10.1x8.6) 18 (39.7)
24/5000/120-100
69367 L
19 – 33
5000
120 A + 4 A
444x328x240 (17.5x12.8x9.4) 30 (66.1)
48/3000/35-50
69157 Z
38 – 66
3000
35 A + 4 A
362x258x218 (14.2x10.1x8.6) 18 (39.7)
48/5000/70-100
69175 B
38 – 66
5000
70 A + 4 A
444x328x240 (17.5x12.8x9.4) 30 (66.1)
187-265 V AC / 45-55 Hz
INPUT
VOLTAGE
RANGE
230V AC ± 2% 50 Hz ± 2%
PART No.
MODEL
(1) Continuous output power at 25°C.
Color Control GX - 68999 W is available to monitor and manage system functions.
Interface protection function is available (optional) CEI-0-21-V1 - SPI 1021 - 69897 T
INVERTER/BATTERY CHARGERS
2.30
INDEX
UF
LE
X
VICTRON ENERGY® - MULTI-FUNCTION
INVERTER/BATTERY CHARGERS
ECOMULTI 24/3000/70
With 2,3 kWh Li-ion storage capacity and a 3 kVA
bidirectional inverter, the ECOmulti reduces dependence
on power from the grid.
MULTI-FUNCTION INVERTER/BATTERY CHARGERS
2.31
■ In combination with the photovoltaic system, it
considerably reduces the electricity withdrawn from the
grid
■ You may connect more units in parallel to increase
capacity or to operate in three-phase configurations;
the ECOmulti can be wall mounted
■ Easy to install, easy to program and easy to operate.
The display is built-in
■ Nighttime. During the night the ECOmulti is
disconnected from the grid. The home is powered by
energy stored in the battery. The ECOmulti will
reconnect the grid when the battery is discharged
■ Discharging during the day. When PV output is reduced
by clouds or when a power hungry load is switched on,
resulting in no surplus PV power available, battery
charging will stop. Insufficient PV power will be
supplemented by power from the ECOmulti . In case of
overload power will be imported from the grid to
supplement power from the ECOmulti (GridAssist
function), and system shut down due to overload will
be prevented
■ Warranty: 5 years – Battery : 3 years plus 7 years
prorated warranty
■ Certifications: EN55014-1, EN55014-2, EN61000-3-3
MODEL
Part No.
Max. AC current feed-through
AC voltage
Cont. output power
Peak power
Maximum charging current
Batteries
Nominal energy
Operating temperature
Protection class
INDEX
ECOMULTI
ECOMULTI 24/3000/70
69896 R
50 A
230V - 50Hz (single phase)
50 VA (25°C)
6000 W
70 A
25,6V / 90Ah - LiFe⁺(DoD max 80%)
2,3 kWh
-20°C ÷ +40°C
IP22
Dimensions mm (“)
475 x 575 x 360 (18.7 x 22.7 x 14.2)
Weight kg (lbs)
28 (61.7) - 60 (132.3) with batteries
UF
LE
X
VICTRON ENERGY® - MULTI-FUNCTION
INVERTER/BATTERY CHARGERS
EASYPLUS
The Poenix EasyPlus is a multifunctional energy system.
■ 12 Volt 1600VA sine wave inverter (3000 Watt peak power)
■ 70A charger including 4A trickle charge for start battery
■ 4 stage adaptive charge technology for quick and accurate
battery charging
■ RCD (30mA/16A) on AC output.
■ Two Ac output sockets protected by 16A automatic circuit
breakers for optimum safety. Second AC output active only
when shore power is available
■ No-break system: uninterrupted switching between
shore/generator and inverter
EASYPLUS
■ Battery cables and remote panel included
MODEL
EP C 12/1600/70-16
Part No.
64948 F
Dimensions mm (“)
510 x 214 x 110 (20 x 8.4 x 4.3)
Weight kg (lbs)
11 (24.3)
EASY SOLAR
The EasySolar combines a MPPT solar charge controller , an
inverter/charger and AC distribution in one enclosure.
■ The product is easy to install, with a minimum of wiring
■ The built-in solar charge controller is the Blue Solar MPPT
100/50: up to three strings of PV panels can be connected with
three sets of MC4 (PV-ST01) PV connectors
MULTI-FUNCTION INVERTER/BATTERY CHARGERS
2.32
■ Unique PowerAssist© technology protects the shore or
generator from being overloaded by adding extra inverter
power when needed
■ Two models are available: 12V and 24V, both with 1600VA
inverter. The batteries can be charged with so lar power
(BlueSolar MPPT) and/or with AC power (inverter/charger)
from the utility grid or a genset
■ Several software programs (Assistants) are available to
configure the system for various grid interactive or stand-alone
applications.
■ Unique PowerAssist© technology protects the utility or
generator supply from being overloaded
MODEL
Part No.
Dimensions mm (“)
Weight kg (lbs)
EASYSOLAR 12/1600/70
69502 P
EASYSOLAR
EASYSOLAR 24/1600/40
69503 S
745 x 214 x 110 (29.3 x 8.4 x 4.3)
745 x 214 x 110 (29.3 x 8.4 x 4.3)
12 (26.5)
12 (26.5)
INDEX
UF
LE
X
VICTRON ENERGY® - DC-DC CONVERTERS
Orion DC/DC Converters are designed to deliver a stable 12 Volt supply from a 24 Volt system. An inferior supply can
cause irreparable damage to 12 Volt system, but the use of an Orion voltage converter prevents such problems. Next to
converters from 24V to 12V, a wide range of other models is available.
DC-DC CONVERTERS
2.33
ORION DC-DC
ISOLATED ORION DC-DC
ORION IP67
NON ISOLATED ORION CONVERTERS
MODEL
PART No.
INPUT VOLTAGE OUTPUT MAX OUTPUT
RANGE
VOLTAGE - VDC CURRENT
TEMPERATURE
CONTROL
DIMENSIONS
H x Lx P mm (“)
WEIGHT
kg (lbs)
Orion 24/12-5
64949 H
18-35
12
5
no
45x90x65 (1.8x3.5x2.6)
0.2 (0.40)
Orion 24/12-12
64951 U
20-35
12
12
no
45x90x100 (1.8x3.5x3.9)
0.3 (0.65)
Orion 24/12-17
67919 P
18-35
12
17
no
45x90x110 (1.8x3.5x4.0)
0.3 (0.65)
Orion 24/12-25
68027 E
18-35
10-15
25
no
65x88x160 (2.6x3.5x7.3)
0.7 (1.55)
Orion 24/12-40
68107 C
18-35
12
40
yes
65x88x185 (2.6x3.5x7.3)
0.85 (1.9)
Orion 24/12-70
68222 C
18-35
10-15
70
yes
65x88x195 (2.6x3.5x7.7)
0.90 (2.0)
Orion 12/24-8
68126 G
9-18
24
8
no
45x90x115 (1.8x3.5x4.5)
0.30 (0.7)
Orion 12/24-10
64956 E
9-18
24
10
no
45x90x125 (1.8x3.5x4.5)
0.40 (0.9)
Orion 12/24-20
68882 Y
9-18
20-30
20
yes
65x88x195 (2.6x3.5x7.7)
0.90 (2.0)
TEMPERATURE
CONTROL
DIMENSIONS
H x Lx P mm (“)
WEIGHT
kg (lbs)
To obtain 120A, it is possible to connect in parallel two 24/12-60 units.
NON ISOLATED - IP67 ORION CONVERTERS
MODEL
PART No.
INPUT VOLTAGE OUTPUT MAX OUTPUT
RANGE
VOLTAGE - VDC CURRENT
Orion IP67 24/12-4
69893 J
15-40
24
4
no
25x43x20 (1.0x1.7x0.8)
0.5 (1.1)
Orion IP67 24/12-10
69894 L
15-40
24
10
no
74x74x32 (2.9x2.9x1.3)
3.0 (6.6)
Orion IP67 24/12-17
69895 N
15-40
24
17
no
74x74x32 (2.9x2.9x1.3)
3.0 (6.6)
TEMPERATURE
CONTROL
DIMENSIONS
H x Lx P mm (“)
WEIGHT
kg (lbs)
ISOLATED ORION CONVERTERS
MODEL
INDEX
PART No.
INPUT VOLTAGE OUTPUT MAX OUTPUT
RANGE
VOLTAGE - VDC CURRENT
Orion 12/24-4,2
64958 J
9-18
12,5
4,2
no
49x88x152 (1.9x3.5x6.0)
0.5 (1.1)
Orion 12/24-8,3
64962 Z
9-18
12,5
8,3
yes
49x88x182 (1.9x3.5x7.2)
0.6 (1.3)
Orion 12/24-15
64966 H
9-18
12,5
15
yes
83x133x191 (3.3x5.2x7.5)
1.4 (3.1)
Orion 24/12-8,3
64959 L
20-35
24
8,3
no
49x88x152 (1.9x3.5x6.0)
0.5 (1.1)
Orion 24/12-17
64963 B
20-35
24
17
yes
49x88x182 (1.9x3.5x7.2)
0.6 (1.3)
Orion 24/12-30
64967 K
20-35
24
30
yes
83x133x191 (3.3x5.2x7.5)
1.4 (3.1)
Orion 24/24-4,2
69903 J
20-35
24
4,2
no
49x88x152 (1.9x3.5x6)
0.5 (1.1)
Orion 24/48-7,5
68987 N
20-35
24
7,5
yes
64x163x160 (2.5x6.4x6.3)
1.4 (3.1)
Orion 48/12-8,3
69904 L
30-60
48
8,3
no
49x88x152 (1.9x3.5x6.0)
0.5 (1.1)
Orion 48/12-17
69247 A
30-60
48
17
yes
49x88x182 (1.9x3.5x7.2)
0.6 (1.3)
Orion 48/12-30
68945 W
30-60
48
30
yes
83x130x191 (3.3x5.1x7.5)
1.4 (3.1)
Orion 48/24-4,2
69905 N
30-60
48
4,2
no
49x88x152 (1.9x3.5x6.0)
0.5 (1.1)
Orion 48/24-8,3
69906 R
30-60
48
8,3
yes
49x88x182 (1.9x3.5x7.2)
0.6 (1.3)
30-60
48
15
yes
83x130x191 (3.3x5.1x7.5)
1.4 (3.1)
Orion 48/24-15
69089 J
Also available 96V and 110V versions
UF
LE
X
VICTRON ENERGY® - ISOLATION TRANSFORMERS
AND AUTOTRANSFORMERS
ISOLATION TRANSFORMERS
The isolation transformer eliminates any electrical continuity between AC
shore power and the ship. It is essential for safety and eliminates the need
for galvanic isolators and polarity alarms. The shore power is fed to the
primary side of the transformer and the ship is connected to the
secondary. The isolation transformer completely isolates the boat from the
shore ground. By connecting all metal parts to the neutral output on the
secondary side of the transformer, a GFCI (ground fault current
interrupter) will trip or a fuse will blow in case of a short circuit.
Aluminium epoxy powder coated case with drip shield, circuit board
protection with an acrylic coating, toroidal transformer.
ISOLATION TRANSFORMER
PART No.
WATT
DIMENSIONS
H x W x D mm (“)
WEIGHT
kg (lbs)
2000 W 115/230 V
64969 P
2000 W
375x214x110 (14.8x8.4x4.3)
10 (22.0)
3600W 115/230 V
64970 Y
3600 W
362x258x218 (14.2x10.1x8.5)
23 (50.7)
7000W 230 V
64972 C
7000 W
362x258x218 (14.2x10.1x8.5)
26 (57.3)
MODEL
AUTOTRANSFORMER 120/240 32A and 100A
■ An autotransformer or autostep down transformer is an electrical
transformer with only one winding. An autotransformer, portions of
the same winding act as both the primary and secondary sides of
the transformer. The winding has at least three taps where electrical
connections are made. Autotransformers have the advantages of
often being smaller, lighter, and cheaper than typical dual-winding
transformers, but autotransformers have the disadvantage of not
providing electrical isolation.
■ Autotransformers are often used to step up or step down voltages
in the 110-115-120 volt range and voltages in the 220-230-240 volt
range - for example. providing 120V (with taps) from 240V input,
allowing equipment designed for 120 volts to be used with a 240
volt supply (as in using US electrical equipment with higher
European voltages)
■ Temperature protected. In case of overheating, the autotransformer
is disconnected from the supply. Reset is manual
■ Trasformator type: toroidal
■ Enclosure Aluminium. Protection category IP21
ISOLATION TRANSFORMERS - AUTOTRANSFORMERS
2.34
Features
ISOLATION TRANSFORMER
PART No.
INPUT/OUTPUT
VOLTAGE
MAXIMUM 240V
FEED CURRENT
DIMENSIONS
H x L x P mm (“)
WEIGHT
kg (lbs)
32 A
68349 D
120/ 240 V - 50/60Hz
32 A
375x214x110 (14.8x8.4x4.3)
10 (22.0)
100 A
68883 A
120/ 240 V - 50/60Hz
100 A
425x214x110 (16.7x8.4x4.3)
14 (30.9)
MODEL
INDEX
UF
LE
X
VICTRON ENERGY® - ACCESSORIES
BATTERY MONITORS
The BMV monitors feature an advanced microprocessor control system combined
with high resolution measuring system for battery voltage and charge/discharge
current. It can display: voltage, charge/discharge current, state of charge of the
battery (in Ah or %), remaining charge. Standard with connection cables and shunt.
Mounting hole: 52mm (2”)
ACCESSORIES
2.35
BMV 700 - 69112 A – monitoring 1 battery 6,5-95 VDC
BMV 702 - 69151 L – monitoring 2 batteries 6,5-95 VDC
BMV 702 BLACK - 69159 D – monitoring 2 batteries 6,5-95 VDC
BMV 702
BATTERY ISOLATORS
Battery isolators allow simultaneous charging of two or more batteries from one
alternators, without connecting the batteries together. Discharging the accessory
battery, for example, will not result in discharging the starter battery.
ARGO – DIODE BATTERY ISOLATORS
The Argo battery isolators feature a low voltage drops thanks to the use of
Schottky diodes: at low current the voltage drop is approximately 0,3V and at the
rated output approximately 0,45V.
All models are fitted with a compensation diode that can be used to slightly
increase the output voltage of the alternator. This compensates for the voltage
drop over the diodes in the isolator.
ARGO
Alternator energize input
Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator
is directly connected to a battery.
Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the
alternator will not start. The new diode isolators have a special current limited energize input that will power the B+
when the engine run/stop switch is closed.
MODEL
PART No.
MAX CHARGE
CURRENT
ALTERNATOR
MAX CURRENT
No. of
BATTERIES
DIMENSIONS
H x L x P mm (“)
WEIGHT
kg (lbs)
80-2AC
67435 R
80A
80A
2
60x120x90 (2.4x4.7x3.5)
0.6 (1.3)
100-3AC
64984 K
100A
100A
3
60x120x115 (2.4x4.7x4.5)
0.8 (1.8)
120-2AC
64985 M
120A
120A
2
60x120x115 (2.4x4.7x4.5)
0.8 (1.8)
140-3AC
64986 P
140A
140A
3
60x120x150 (2.4x4.7x6.0)
1.2 (2.6)
160-2AC
64987 S
160A
160A
2
60x120x150 (2.4x4.7x6.0)
1.2 (2.6)
180-3AC
64988 U
180A
180A
3
60x120x200 (2.4x4.7x7.9)
1.5 (3.3)
ARGO FET BATTERY ISOLATORS: NO VOLTAGE LOSS
Differently from diode battery isolators, FET isolators have virtually no voltage loss.
Voltage drop is less then 0,02 Volt at low current and averages 0,1 Volt at higher
currents.
When using ARGO FET battery isolators, there is no need to also increase the
output voltage of the alternator. Care should be taken however to keep cable
lengths short and of sufficient cross section.
Alternator energize input
The new ARGO FET isolators have a special current limited energize input that will
power the B+ when the engine run/stop switch is closed.
INDEX
ARGO FET
MODEL
PART No.
MAX CHARGE
CURRENT
ALTERNATOR
MAX CURRENT
No. of
BATTERIES
DIMENSIONS
H x L x P mm (“)
WEIGHT
kg (lbs)
1002-FET
64989 W
100A
100A
2
65x120x200 (2.6x4.7x7.9)
1.2 (2.6)
1003-FET
64990 E
100A
100A
3
65x120x200 (2.6x4.7x7.9)
1.2 (2.6)
2002-FET
64991 G
200A
200A
2
65x120x200 (2.6x4.7x7.9)
1.2 (2.6)
2003-FET
64992 J
200A
200A
3
65x120x200 (2.6x4.7x7.9)
1.2 (2.6)
UF
LE
X
VICTRON ENERGY® - ACCESSORIES
CYRIX - MICROPROCESSOR CONTROLLED BATTERY COMBINER
The Cyrix battery combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel
when one of them has reached a preset voltage (indicating that the battery has been charged) and disconnects when the
voltage decreases below float level (indicating that one or more batteries have been discharged).
No voltage loss
Cyrix battery separators are an excellent replacement for diode isolators.
The main feature is that there is virtually no voltage loss so that the
output voltage of alternators or battery chargers does not need to be
increased.
2.36
ACCESSORIES
Prioritising the starter battery
In a typical setup the alternator is directly connected to the starter
battery. The accessory battery and possibly also a bow thruster and other
batteries are each connected to the starter battery by Ciryx battery
combiners.
When a Ciryx senses that the starter battery has reached its connect
voltage will engage, to allow for parallel charging of the other batteries.
Bidirectional voltage sensing
The Ciryx senses the voltage of both connected batteries. It will therefore
also engage if for example the accessory battery has been charged by a
battery charger.
CYRIX
Parallel connection in case of emergency
The Cyrix can also be engaged with a switch to connect manually
batteries in parallel. This is especially useful in case of emergency when
the starter battery is discharged or damaged.
12/24V auto ranging with Cyrix-i
The Cyrix-i 12/24-100 automatically detects system voltage.
MODEL
PART No.
CONTINUOUS PEAK
CURRENT
CURA
RENT
CONNECT
VOLTAGE
V
DISCONNECT
VOLTAGE
DIMENSIONS
H x W x D mm (“)
WEIGHT
kg (lbs)
CT 12/24-120
68956 B
120 A
180 A
13÷13.8 V
and 26÷27.6 V
11÷12.8 V
and 22÷25.7 V
46 x 46 x 80
(1.8 x 1.8 x 3.2)
0.11
(0.24)
CT 12/24-230
69357 H
230 A
500 A
13÷13.8 V
and 26÷27.6 V
11÷12.8 V
and 22÷25.7 V
65 x 100 x 50
(2.6 x 3.9 x 2.0)
0.3
(0.66)
i 12/24-400
67064 F
400 A
2000 A
13÷13.8 V
and 26÷27.6 V
10,5÷12.8 V
and 21÷25.6 V
78 x 102 x 110
(3.0 x 4.0 x 4.3)
0.9
(1.9)
i 24/48-400
69892 G
400 A
2000 A
13÷13.8 V
and 26÷27.6 V
10,5÷12.8 V
and 21÷25.6 V
78 x 102 x 110
(3.0 x 4.0 x 4.3)
0.9
(1.9)
40A/60A/200A BATTERY PROTECTION
The Victron battery protection disconnects the
battery from non essencial loads before it is
completely discharged (which would damage
the battery) or before it has insufficient
power left to crank the engine.
BP-40i e BP-60i
MODEL
PART No.
MAX CONTINUOUS
CURRENT
PEAK
CURRENT
BP-40i
66038 Z
40 A
120 A
6-35 V
BP-60i
65000 S
60 A
120 A
BP-200i
66246 G
200 A
480 A
BP-200i
OPERATING
LOAD DISCONNECT
VOLTAGE RANGE
DELAY
DIMENSIONS
H x W x D mm (“)
WEIGHT
kg (lbs)
1 minute
80 x 60 x 40
(3.2 x 2.4 x 1.6)
0.2
(0.5)
6-35 V
1 minute
80 x 60 x 40
(3.2 x 2.4 x 1.6)
0.2
(0.5)
6-35 V
1 minute
60 x 120 x 110
(2.4 x 4.7 x 4.3)
0.8
(1.8)
INDEX
UF
LE
X
SINERGEX® - PURE SINE WAVE INVERTERS
PURESINE® SERIES
The PureSine™ are pure sine wave inverters
designed for use on RV/caravans, trucks,
boats, emergency vehicles and renewable
systems.
INVERTERS
2.37
LED indicates possible failures
Remote control panel included.
Ventilation with thermostatic control
Automatic protection against short circuit,
overload, over temperature and
overvoltage.
■ Protection against low voltage with alarm
and automatic shutdown.
■
■
■
■
PS 700
PS 1000
PS 1500
PS 2000
■ Certifications: CE
■ Warranty: 2 anni
PSII 700, PSII 1000, PSII 1500, PSII 2000, PSII 3000 - 12V DC
MODEL
PSII 700-212
PSII 1000-212
PSII 1500-212
PSII 2000-212
PSII 3000-212
Part No.
64492 M
64010 P
64494 S
64495 U
64496 W
DC input voltage
10,5-15 V
10,5-15 V
10,5-15 V
10,5-15 V
10,5-15 V
Continuous power
700 W
1000 W
1500 W
2000 W
3000 W
Surge AC power
1400 W
2000 W
3000 W
4000 W
6000 W
Output AC voltage
220 V +/- 5%
220 V +/- 5%
220 V +/- 5%
220 V +/- 5%
220 V +/- 5%
Output frequency
50 Hz +/- 0,3%
50 Hz +/- 0,3%
50 Hz +/- 0,3%
50 Hz +/- 0,3%
50 Hz +/- 0,3%
91%
91%
90%
91%
90%
Low battery alarm
11,0 V
11,0 V
11,0 V
11,0 V
11,0 V
Standby current draw
0,25 A
1,25 A
1,4 A
2,8 A
2,8 A
29,5 x 18,0 x 7,2
(11.6 x 7.1 x 2.8)
38,3 x 18,2 x 8,8
(15.1 x 7.2 x 3.5)
41,5 x 19,1 x 8,8
(16.3 x 7.5 x 3.5)
42,2 x 20,8 x 16,0
(16.6 x 8.2 x 6.3)
45,2 x 20,8 x 16,6
(17.8 x 8.2 x 6.5)
2,7 (5.9)
4,0 (8.8)
4,8 (10.6)
9,0 (19.8)
9,8 (21.6)
Efficiency @ full load
Dimensions cm (“)
Weight kg (lbs)
PSII 700, PSII 1000, PSII 1500, PSII 2000, PSII 3000 - 24V DC
MODEL
PSII 700-224
PSII 1000-224
PSII 1500-224
PSII 2000-224
PSII 3000-224
Part No.
64493 P
64014 Y
64497 Y
64498 A
64499 C
DC input voltage
21-30 V
21-30 V
21-30 V
21-30 V
21-30 V
Continuous power
700 W
1000 W
1500 W
2000 W
3000 W
Surge AC power
1400 W
2000 W
3000 W
4000 W
6000 W
Output AC voltage
220 V +/- 5%
220 V +/- 5%
220 V +/- 5%
220 V +/- 5%
220 V +/- 5%
Output frequency
50 Hz +/- 0,3%
50 Hz +/- 0,3%
50 Hz +/- 0,3%
50 Hz +/- 0,3%
50 Hz +/- 0,3%
93%
94%
93%
94%
93%
Low battery alarm
22,0 V
22,0 V
22,0 V
22,0 V
22,0 V
Standby current draw
0,15 A
0,65 A
0,7 A
1,5 A
1,5 A
29,5 x 18,0 x 7,2
(11.6 x 7.1 x 2.8)
38,3 x 18,2 x 8,8
(15.1 x 7.2 x 3.5)
41,5 x 19,1 x 8,8
(16.3 x 7.5 x 3.5)
42,2 x 20,8 x 16,0
(16.6 x 8.2 x 6.3)
45,2 x 20,8 x 16,6
(17.8 x 8.2 x 6.5)
2,7 (5.9)
4,0 (8.8)
4,8 (10.6)
9,0 (19.8)
9,8 (21.6)
Efficiency @ full load
Dimensions cm (“)
Weight kg (lbs)
INDEX
UF
LE
X
SINERGEX® - BATTERY CHARGERS
PURECHARGE™
The PureCharge Battery Chargers are series of
professional intelligent and fully automatic 3stage battery chargers.
OUTPUT
USCITA
CHARGING
CURVE
CURVA
DI CARICO
15.0 VDC
Battery
Voltaggio
Voltage
della batteria
BATTERY CHARGERS
■ Using microprocessor and switch-mode
technology, the PureCharge battery charges
carefully assess the battery and then deliver
the optimum charge required
■ Temperature sensor included
■ Simple status LED display
■ By using the simple DIP switches, you can
select the charging voltages and curve to suit
your battery
■ Seven selectable charge curves
■ For all lead-acid batteries
(AGM, GEL, Pb and MF)
■ Microprocessor controlled
■ 2/3 isolated output
■ Automatic intelligent cooling
■ Light weight and compact design
■ Electronic reverse polarity protection
■ 3 stage charging: Bulk, Absorption, Float
2.38
Current
Tensione
BULK
CHARGE
CARICA
VELOCE
ABSORPTION
ASSORBIMENTO
FLOAT
CHARGING
MANTENIMENTO
MODEL
PC-2512
PC-4012
Part No.
65600 T
65601 V
150-250 VAC
150-250 VAC
Frequency
50 Hz
50 Hz
Output voltage
12 V
12 V
24 Amps/12 V
40 Amps/12 V
IP20
IP20
100-300 Ah
100-400 Ah
82%
82%
-20°C/+60°C
-20°C/+60°C
7 pre-set selectable charging curve
7 pre-set selectable charging curve
270 x 185 x 70 (10.6 x 7.3 x 2.8)
330 x 185 x 70 (13.0 x 7.3 x 2.8)
3,5 (7.7)
4 (8.8)
Input voltage
Maximum charge current
Protection category
Battery capacity
Efficiency
Operating temperature
Charging absorption & float
Dimensions mm (“)
Weight kg (lbs)
INDEX
UF
LE
X
CBE® - CHARGE CONTROLLERS AND ACCESSORIES
CHARGE CONTROLLERS
Designed to control the battery charge at 12 V using photovoltaic
modules.
CHARGE CONTROLLERS - ACCESSORIES
2.39
■
■
■
■
LED display charging status
Mosfet control
Designed to connect up to 2 solar panels (PRS240 only)
Protected against short circuit and reverse polarity
PRS110
MODEL
PRS110
PRS240
Part No.
67260 F
64753 P
Voltage
12 V
12 V
End charging voltage
14,1 V
14,3/14,1 V (GEL)
Self-consumption
0,1 mA
0,1m A
Max solar power
110 W
240 W
Dimensions cm (“)
11,5 x 9,0 x 3,7
(4.5 x 3.5 x 1.5)
11,5 x 9,0 x 3,7
(4.5 x 3.5 x 1.5)
PRS240
PT-542 CONTROL PANEL - Part No. 64754 S
For use with PRS240 charge controller. Dimensions: 6 x 6 cm
■ Displays battery voltage and output current from solar panel.
Supplied with 2 m cable.
PT-542
ACCESSORIES
Roof gland
KT1-10 Part No. 61443 G
KT1-20 Part No. 61444 J
Roof
gland boxes
KT5 Part No. 64755 U
Cable-conduits
KT5-C10 Part No. 64756 W
KT5-C20 Part No. 64757 Y
CSB2 BATTERY COMBINER - Part No. 61442 E
Device for engine battery charging, both by solar panel and the
battery charger, through the service battery banks.
■ Recharge the car battery with a current of 0.1 A to 4.0 A, giving
priority to the service battery.
BDS-150 BATTERY DUO SYSTEM - Part No. 66195 S
CSB2
The Battery Duo System operates two service batteries separately and
alternately when charging (by alternator, battery chargers and PV
modules) and during discharge. Dimensions: 18,0 x 12,0 x 3,5 cm.
■
■
■
■
Function monitoring of the battery and "save battery" function
Battery disconnection through switch
Manage high currents up to 70 A with 300 A peaks
Possibility to connect loads up to 140 A max absorption
BDS-150
MC-DUO REMOTE CONTROL PANEL - Part No. 66196 U
Connected to BDS-150 module, it allows to choose manual or
automatic operation of the BDS-150.
Supplied with 6 m cable for BDS-150 connection.
INDEX
MC-DUO
UF
LE
X
BEP MARINE®
BATTERY DISTRIBUTION SWITCHES
BEP MARINE BATTERY SWITCH TEST PROCEDURES (UL 1107)
Continuous (1 hour) intermittent (5 minutes) and cranking (engine
starting – 10 seconds). The test is to determine the maximum current
the switch can handle for the stated time, without the rear terminals
exceeding 100°C above the ambient temperature. The continuous and
intermittent ratings are tested at 110% of specified ratings. All BEP
switches are tested independently to this specification by a 3rd party
laboratory.
701 BATTERY MASTER SWITCH - 63142 C
The 701 Contour Battery Master Switch offers a number of unique
features. The highlights being the patented contour lock system,
allowing it to be a stand alone unit, or locked together with other
switches. The 701 also features a control knob which cannot be
removed whilst in the On or OFF position, however can be removed by
switching to an anti-clockwise 45° position. The control knob also
features an interchangeable labelling system allowing a full range of
applications Set-715 (page 133). The 701 also features removable side
plates on 4 sides for access of up to 1/0 cables. Plus a rear cover
insulating the rear terminals against any short circuits ensuring the
switch meets ABYC requirements. The 701 can be either surface or
recess mounted by cutting a 52 mm (2 1/16”) hole.
701
701-KEY
- 63930 E
Spare Part
Removable
knob
FEATURES:
■
■
■
■
■
■
■
■
■
■
Continuous rating: 275 Amp DC
Intermittent rating: 455 Amp DC
Cranking rating: 1250 Amp DC
Voltage rating: 48V DC
Operation: ON/OFF
Mounting: recessed or surface
Termination stud size: 2 x 10 mm (3/8”)
Dimensions: 69 x 69 x 75h mm (2.75 x 2.75 x 3h inches)
Tin plated copper studs and nuts
Ignition protected
701-PM PANEL MOUNT BATTERY SWITCHES - 65494 X
Dimensioni 701
Standard BEP
interchangeable
label system
Countersunk
recess for
surface mount
application
Same specifications as 701 switch
BATTERY DISTRIBUTION SWITCHES
2.40
Mod. 701 Dimensions
701 - PM
Removable
key
Standard
52,4 mm (2 1/16”)
hole cut out
INDEX
UF
LE
X
BATTERY DISTRIBUTION SWITCHES
2.41
BEP MARINE®
BATTERY DISTRIBUTION SWITCHES
720 HEAVY DUTY BATTERY SWITCH - 63174 S
The 720 Heavy Duty Battery Switch fits into the same contour lock system as used on the
battery distribution system. Rated at 600 Amp continuous and 2500 Amp cranking. It is
well suited to larger vessels. As with the 701 and 720 can be recessed or surface
mounted. The 720 uses the same style of self cleaning sliding contact as used in the 701.
Also utilises the same label sheet as 701. Part Number 715.
FEATURES:
■ Continuous rating: 600 Amp DC
■ Intermittent rating: 800 Amp DC
■ Cranking rating: 2500 Amp DC
■ Voltage rating: 48V DC
■ Operation: ON/OFF
■ Mounting: recessed or surface
■ Termination stud size: 2 x 12 mm (1/2”)
■ Dimensions: 102 x 102 x 90h mm (4 x 4 x 3.5h inches)
■ Tin plated copper studs and nuts
■ Ignition protected
■ Available in bulk only
720
720-DP/B DOUBLE POLE BATTERY SWITCH - 67806 A
This model has the same dimensions and features as the 720 battery switch.
The 720-DP also meets the needs of vessels being built to survey requirements where
positive and negative supplies must be isolated at the same time.
720, 720-DP/B Dimensions
FEATURES:
■ Continuous rating: 400 Amp DC
■ Intermittent rating: 525 Amp DC
■ Cranking rating: 1500 Amp DC
■ Voltage rating: 45V DC
■ Operation: ON/OFF 2 poles
■ Mounting: recessed or surface
■ Termination stud size: 4 x 10 mm (3/8”)
■ Dimensions: 102 x 102 x 90h mm (4 x 4 x 3.5h inches)
■ Tin plated copper studs and nuts
■ Ignition protected
■ Available in bulk only
700 EASYFIT BATTERY SWITCH - 63672 J
The 700 Easyfit is ideal on those installations where switches need to be recessed
through varying thickness of panels. 700 Easyfit features an easily removable threaded
ring allowing for panel thickness up to 19 mm (3/4”). It uses the same features as the
701 with the removable key 45° past the off position, labelled handle and a removable
back cover covering exposed terminals to meet ABYC specifications. The switch can also
be surface mounted offering a unique style compared to other switches available on the
market. The 700 Easyfit can easily be retrofitted in place of most European post and
lever type switches.
FEATURES:
■ Continuous rating: 275 Amp DC
■ Intermittent rating: 455 Amp DC
■ Cranking rating: 1250 Amp DC
■ Voltage rating: 48V DC
■ Operation: ON/OFF
■ Mounting: recessed or surface
■ Termination stud size: 2 x 10 mm (3/8”)
■ Tin plated copper studs and nuts
■ 700-KEY spare Part Removable knob
■ Ignition protected
INDEX
Recessed
hole cut
out 85 mm
(3.3”)
700 EASYFIT Dimensions
720-DP/B
700 EASYFIT
UF
LE
X
BEP MARINE®
BATTERY DISTRIBUTION SWITCHES
701-S MINI BATTERY SELECTOR SWITCH - 64387 R
The 701-S is the most compact selector switch available on the market.
Housed in the same dimensions as the 701 and includes the same
removable side plates and back cover.
While BEP Marine foremost recommends isolated battery systems as
outlined with our distribution clusters, the 721 offers a simple
economical way of separating two batteries.
Please note this system will not separate electronics from harmful
engine starting spikes.
701-S
Continuous rating: 200 Amp DC
Intermittent rating: 300 Amp DC
Cranking rating: 1000 Amp DC
Voltage rating: 48V DC
Operation: Selector 1-2-both-off
Mounting: recessed or surface
Termination stud size: 3 x 8 mm (5/16”)
Dimensions: 69 x 69 x 75h mm (2.75 x 2.75 x 3h inches)
Tin plated copper studs and nuts
701S-PM PANEL MOUNT BATTERY SWITCHES - 66163 C
Same specifications as 701S switch
701-S dimensions
701S-PM dimensions
Countersunk
recess for
surface mount
application
Standard
52,4 mm (2
1/ ”)
16
hole cut out
BATTERY DISTRIBUTION SWITCHES
Recessed hole
cut out 52 mm (2.1”)
FEATURES:
■
■
■
■
■
■
■
■
■
2.42
721 BATTERY SELECTOR SWITCH - 63143 E
The 721 is our heavy duty selector switch, housed in the same module
as the 720 and includes the same removable plates and back cover.
While BEP Marine foremost recommends isolated battery systems as
outlined with our distribution clusters, the 721 offers a simple
economical way of separating two batteries. Please note this system
will not separate electronics from harmful engine starting spikes.
FEATURES:
■
■
■
■
■
■
■
■
■
■
■
Continuous rating: 350 Amp DC (between common and B1 or B2)
Continuous rating: 500 Amp Dc (between common and B1 or B2)
Intermittent rating: 500 Amp DC
Cranking rating: 1500 Amp DC
Voltage rating: 48V DC
Operation: Selector – Battery 1-2-both off
Mounting: recessed or surface
Termination stud size: 3 x 10 mm (3/8”)
Dimensions: 102 x 102 x 90h mm (4 x 4 x 3.5h inches)
Tin plated copper studs and nuts
Ignition protected
Recessed hole
cut out 85 mm (3.3”)
721
721 dimensions
INDEX
UF
LE
X
BEP MARINE® - REMOTE
OPERATED BATTERY SWITCHES
Due to the increased loading requirements on modern boats and large
increases in the cost of copper battery cable, the MD range of battery
switches allows you to mount the battery switch very close to the
battery, reducing cable lengths to starter motor. They are also ideal for
remote isolation of bow thrusters.
THE MD RANGE OFFERS THE FOLLOWING FEATURES:
BATTERY DISTRIBUTION SWITCHES
2.43
■ Remote operation (easier access for battery control).
■ Battery switch can be mounted alonside battery,
reducing cable lengths and cable sizes to starter motor
(large cost saving in copper cable).
■ Reduced labour for fitting, due to shorter battery cabling.
■ Manual override option to meet CE requirements.
■ LED status identification for remote control switch.
■ Same capacity/specification and mounting options as standard BEP
battery switches.
■ Utilize same interchangeable labelling system as BEP battery
switches.
For the remote operation of the 701-MD and 720-MD battery switches,
use the key switches 722-KS or 722-KS2 (page 133) or any standard
on/off switch.
701-MD
701-MD dimensions
701-MD SPECIFICATIONS - 66026 S
■
■
■
■
■
■
■
■
■
Continuous rating: 275 Amp DC
Intermittent rating: 455 Amp DC
Cranking rating: 1250 Amp DC
Voltage rating: 9,5 – 32 Volt
Operation: On / Off
Mounting: recessed or surface
Ignition protected
Stud size: 2 x 10 mm (3/8”)
Tin plated copper studs and nuts
720-MDO SPECIFICATIONS - 66027 U
■
■
■
■
■
■
■
■
■
720-MDO
Continuous rating: 500 Amp DC
Intermittent rating: 700 Amp DC
Cranking rating: 2500 Amp DC
Voltage rating: 9,5 – 32 Volt
Operation: On / Off
Mounting: recessed or surface
Ignition protected
Stud size: 2 x 12 mm (1/2”)
Tin plated copper studs and nuts
WIRING DIAGRAM
720-MDO dimensions
Optical sensor benefits
(720-MDO only)
■ Can be used to switch in positive or
negative lines
■ Low stand by current draw (7mA). Zero if
aux control switch used (See instructions).
■ Main contacts isolated from control circuit
allowing operation via another battery
source
720 - MDO
INDEX
UF
LE
X
BEP MARINE®
DUAL BATTERY CHARGING
VOLTAGE SENSITIVE RELAYS(VSR)
The VSR switch utilizes the same operation as the MD battery switches
and is packed with features which complimet the MD rang
701-MDVS
and 80-701-0018-00
Same specifications
as 701-MD
FEATURES:
■ Dual battery sensing
■ Remote emergency parallel function 701-MDVS and 720-MDVS can
be operated through a momentary button on the dash which will
parallel the batteries for a present time of 10 minutes. Once this 10
minutes has passed, if the voltage is up high enough for the voltage
sensitive switch to operate, it twill stay engaged. If not, it will
discharge.
■ Engine run sensing VSR will engage when the voltage on either start
or house battery reaches 13,7 Volt. If the combined battery voltage
drops below 13,0 Volt and the engine is not running, after 5
seconds the contacts will open and stay open until the start or
house battery voltage exceeds 13,7 Volt. If the combined battery
voltage drops below 12,2 Volt and the engine is running, after 5
minutes the contacts will open and stay open until the start or
house battery voltage exceeds 13,7 Volt. If voltage drops below 13,0
Volt and stays above 12,2 Volt on either start or house battery while
engine is running, the VSS will stay engaged.
■ Manual override option
■ The VSR will cover your dual battery charging requirements and
emergency parallel operation in one unit
720-MDVS
and 720-MDO-EP
VOLTAGE SENSITIVE RELAYS
2.44
Same specifications
as 720-MD
MODEL
PART No.
VOLT
RATING
ENGAGES
DISENGAGES
701-MDVS
66416 F
12 VDC
275 A
13.7 VDC
12.2-13.00 VDC
701-MDVS-24V
66418 K
24 VDC
275 A
27.4 VDC
24.4-26.00 VDC
80-701-0018-00
68152 H
12/24 VDC
275 A
Emergency parallel only
720-MDVS-24V
68346 X
12/24 VDC
500 A
Emergency parallel only
INDEX
UF
LE
X
BEP MARINE®
DUAL BATTERY CHARGING
VOLTAGE SENSITIVE RELAY
2.45
VOLTAGE SENSITIVE RELAYS
710 -140A - DIGITAL VOLTAGE SENSING RELAY (DVSR)
INDEX
The Voltage Sensing Relay (VSR) allows the charging of a second
battery from a single charging source. When the voltage on the start
battery rises to a level indicating a 60% charge, the VSR engages
allowing the 2nd battery to charge. When charging stops and voltage
falls, the VSR will disengage isolating the two battery banks from each
other. Dual sensing functionality enables the sensing of two battery
banks allowing two way charging.
710-140A
■ Safely charge two or more indipendent battery banks from one
charge source (alternator, battery charger….)
■ Protects start batteries from becoming flattened by domestic loads
■ Simple to install 3-wire connection, leaves alternator wiring intact
■ No Volt drop vs. diode isolators
■ Zero stand by current draw
■ Multi voltage, auto selects between 12 and 24V DC operation
■ Ignition protected
■ Surface or panel mountable
Replace previous models 710-125A and 710-125A-DS
MODEL
PART No.
VOLT
APPLICATION
DIMENSIONS mm (“)
HxLxP
710-140A
68101 P
12V DC/24 VDC
For use on charging system up to: 140 Amp
69 x 69 x 50 (2.75 x 2.75 x 2)
UF
LE
X
BEP MARINE®
REMOTE BATTERY
MANAGEMENT SYSTEM
BATTERY SWITCH
CONTROL CENTER (BCC) - 67405 F
Sophisticated electrical systems need reliable
automation.
It is possible to centralize power handling
with BEP Battery Control Center (BCC)
that can control all battery switches from one
convenient position.
80-700-0051-00
FEATURES
■ The BCC is equipped with locks that ensures
group operation at the turn of the key. Any
switch can be isolated cy disengaging its
lock and toggling the switch off
■ Isolate each battery via key switch or
designated battery banks via breaker.
MODEL
PART No.
DESCRIPTION
80-700-0050-00
68857 Z
Single engine remote
80-700-0051-00
67405 F
Dual engine remote
80-700-0052-00
68858 B
Triple engine remote
■ LED Status indicators for battery switch
status.
BATTERY DISTRIBUTION COMPONENTS
GALVANIC ISOLATORS
■ Prevent galvanic corrosion due to dissimilar metals between boats
■ Gold plated terminals provide superior corrosion resistance to
marine environment
■ Block DC current from flowing through shore power cable
■ Ignition protected
4531001
BATTERY DISTRIBUTION COMPONENTS
2.46
4531011
MODEL
PART No
AMP.
VOLTAGE
FREQUENCY
OPERATING TEMPERATURE
4531001
67078 T
30A
115/230V
50/60 Hz
-20° to 50° C
4531011
67079 V
50/60A
115/230V
50/60 Hz
-20° to 50° C
INDEX
UF
LE
X
BEP MARINE® - BATTERY DISTRIBUTION CLUSTER
715-V DUAL BATTERY CHARGING CLUSTERS
To be used on following systems:
■ Single outboard dual battery bank
■ Single alternator dual battery bank
■ Twin alternator dual battery bank
715-V
BATTERY DISTRIBUTION CLUSTERS
2.47
716-SQ-140A-DVSR DUAL BATTERY CHARGING CLUSTERS
For use on charging systems up to 150A. To be used on following systems:
■ Single outboard dual battery bank
■ Single alternator inboard engine dual battery bank
716-SQ-140A-DVSR
715-S DUAL BATTERY CHARGING CLUSTERS
The 715-S is designed for systems with twin engines and 2 batteries. The house
loads can be switched between port and starboard battery.
The selector switch can also be used to parallel the batteries when in both position.
715-S
717-140A-DVSR THREE BATTERY CHARGING CLUSTERS
This system is designed for twin outboard installations using outboards without
AUX outputs. It will allow the port engine to charge the port start battery and the
house battery when the VSR is engaged. It will also allow the starboard engine to
charge the starboard start battery and the house battery when the starboard VSR is
engaged, giving a combined charge from two outboards into the house battery
until the voltage regulators on both engines control the charge. It will also allow
the house battery to be charged if steaming on one engine.
717-140A-DVSR
MODEL
PART No.
ENGINE/BATTERIES
ORIENTATION
DIMENSIONS mm (“)
LxH
715-V
68856 X
Single inboard or outboard engine/2 banks
RECTANGULAR
207 x 69 (8.1 x 2.75)
716-SQ-140A-DVSR
68102 S
Single inboard or outboard engine/2 banks
SQUARE
138 x 138 (5.4 x 5.4)
715-S
65352 A
Twin inboard or outboard engine/2 banks
RECTANGULAR
138 x 69 (5.4 x 2.75)
717-140A-DVSR
68103 U
Twin outboard engine/3 banks
RECTANGULAR
207 x 138 (8.1 x 5.4)
716-SQ-140A-DVSR
INDEX
717-140A-DVSR
UF
LE
X
BEP MARINE®
BATTERY DISTRIBUTION COMPONENTS
702 DISTRIBUTION STUD
The 702 Contour Distribution Stud allows terminating of heavy duty
cables for 1 or more connections. Contour lock housing has removable
side plates which allow for connections from all sides, utilising link
bars 702SB.
702SB - 64393 K
702
2.48
703-300A
702SB
MODEL
PART No.
STUD SIZE
AMP
DIMENSIONS mm (“)
702
63687 Y
10 mm (3/8”)
200A
69 x 69 x 50 (2.71 x 2.71 x 2)
703-300A
68058 S
10 mm (3/8”)
300A
138 x 69 x 50 (5.4 x 2.71 x 2)
703-500A
63688 A
10 mm (3/8”)
500A
69 x 69 x 50 (2.71 x 2.71 x 2)
BUS BARS
Marine grade negative or positive Bus Bars are supplied as standard
with all BEP AC/DC control panels
FEATURES:
■
■
■
■
BB-6W-2S
4 mm (5/32”) stainless steel screws with shakeproof washers
2x6 mm (1/4”) input stud
Tin plated brass
Insulated mounting base
BB-12W-2S
MODEL
PART No. OUTPUT SCREWS
4 mm (5/32”)
INPUT STUDS
6 mm (1/4”)
CURRENT
RATING
BB-6W-2S
63690 L
6
1
100A
BB-12W-2S
63691 N
12
1
100A
BB-24W-2S
63692 R
24
2
150A
BB-24W-2S
BATTERY DISTRIBUTION COMPONENTS
702SB
Secondary Bus
Fitted to distribution
stud 702 allows for
small wire
connections without
cluttering main stud.
Terminal screws 4
mm (1/8”).
INSULATED STUDS
FEATURES:
DIMENSIONS W x H x D mm (“):
■ Tinned copper 10 mm (3/8”) or
brass studs 6 mm (1/4”)
with spring washers
■ High temperature plastic
insulated mounting base
■ IS-10MM-1: 44x35x18 mm
(1.73x1.37x0.7)
■ IS-6MM-2: 42x32x36 mm
(1.65x1.25x1.42)
IS-10MM-1
64392 H
IS-6MM-2
63689 C
INDEX
UF
LE
X
BEP MARINE®
BATTERY DISTRIBUTION COMPONENTS
702-MFH AND 702-HDBFH SINGLE FUSE HOLDER
BATTERY DISTRIBUTION COMPONENTS
2.49
BEP Marine’s new heavy duty fuse holders are an economical way of
fusing heavy loads 30-80 amp. Ideal for battery charger outputs or
mains feeds. 6 mm (1/4”) studs receive ring terminals and cables up to
25 mm2 (4 gauge). Fuse is clamped between tinned brass clamp for
positive connection. Covers enclose exposed terminals to meet ABYC
standards
MODEL
PART No.
STUD SIZE
DIMENSIONS mm (“)
702-MFH
67406 H
6 mm (1/4”)
71 x 53 x 36 (2,8 x 2 x 1.42)
702-MFH
HIGH AMPERAGE FUSES
■ Fuses available 30-80 Amp
■ Interrupt capacity: 1000 Amp DC
■ Maximum voltage: 32 Volt DC
HEAVY DUTY FUSES
MODEL
PART No.
RATING
MODEL
PART No.
RATING
BFHD-30A
66132 R
30 Amp
BFHD-60A
66135 X
60 Amp
BFHD-40A
66133 T
40 Amp
BFHD-70A
66136 Z
70 Amp
BFHD-50A
66134 V
50 Amp
BFHD-80A
66137 B
80 Amp
704-ANL FUSE HOLDER HEAVY DUTY - 63235K
The 704-ANL allows fusing of heavy duty accessories between 80 Amp 500 Amp. Mounted in contour lock mouldings with removable sides.
Fuse
viewing
window
ANL-FUSE
704-ANL
704-ANL
MODEL
PART No.
ANL FUSE LINKS
DIMENSIONS
mm (“)
IP100A
64395 P
100 Amp
138 x 69 x 50 (5.4 x 2.75 x 2)
IP150A
63806 D
150 Amp
138 x 69 x 50 (5.4 x 2.75 x 2)
IP200A
63807 F
200 Amp
138 x 69 x 50 (5.4 x 2.75 x 2)
IP250A
63808 H
250 Amp
138 x 69 x 50 (5.4 x 2.75 x 2)
IP300A
63809 K
300 Amp
138 x 69 x 50 (5.4 x 2.75 x 2)
IP425A
63810 U
425 Amp
138 x 69 x 50 (5.4 x 2.75 x 2)
IP500A
64407 U
500 Amp
138 x 69 x 50 (5.4 x 2.75 x 2)
IGNITION PROTECTED
INDEX
UF
LE
X
BEP MARINE®
ATC FUSE HOLDERS
Clip on cover
with label
position for
each fuse
Position
for spare fuses
Available with
screw terminal
or 6,3 mm Quick
Connect options
(see part numbers
below)
ATC-6W
SPECIFICATIONS
■
■
■
■
■
Maximum amperage per circuit: 30 Amp
Maximum amperage per block: 100 Amp
Maximum voltage: 32V DC
Base material: polycarbonate
Cover material: clear polycarbonate
2.50
ATC FUSE HOLDERS
The BEP ATC fuse holder includes the
patented contour lock system (as used in all
BEP battery management products). This
allows you to module as many fuse holders as
you like together.
The advantage of this is that it allows you to
link the inputs together, or split them apart to
allow multiple power groups within one fuse
holder: eg. switched supply or 24 hour supply.
For the aftermarket the modular system
allows you to carry one part number instead
of 3 or 4. The 6W-ATC also includes a clip on
cover and label positions. The lebel positions
receive the same label as the 1000 series
panels (ordered separately).
ATC-6W Dimensions
ATC FUSE HOLDERS
ATC FUSES
MODEL
PART No.
DESCRIPTION
MODEL
PART
No.
RATING
ATC-6W
65569 C
6 way fuseholder, screw terminals, with cover
J03A
66018 T
3 Amp
ATC-6WQC
66017 R
6 way fuseholder, quick connect, with cover
J05A
66019 V
5 Amp
J7.5A
66020 D 7.5 Amp
J10A
66021 F
J15A
66022 H 15 Amp
J20A
66023 K 20 Amp
J25A
66024 M 25 Amp
J30A
66025 P 30 Amp
Fuse holder link
Part No. - 65570 L
BB-LINK-26 mm
Ordered
separately
10 Amp
J05A
SPECIFICATIONS
BB-LINK - 26 mm
■ Fuses available: 3-30 Amp
■ Interrupt capacity: 1000 amp DC
■ Maximum voltage: 32 Volt DC
J05A Dimensions
INDEX
UF
LE
X
BATTERY SELECTOR SWITCHES
2.51
BEP MARINE®- PRO INSTALLER EZ-MOUNT
BATTERY SELECTOR SWITCHES
As easy as 1,2,3, these revolutionary battery switches allow you to wire
from the front. Never has been so easy and cabling so accessible.
With their shared interconnection height, Pro Installer-EZ-Mount
battery switches “cluster” directly with the Pro Installer Busbar
Range,resulting in the fastest, most compact installations. Optimized
cable access makes installation a breeze.
Pro Installer switches set the new benchmark with outstanding
ergonomics, intuitive look/feel, and are engineered from the finest
materials to withstand the harsh marine environment. The outstanding
performance and features of this powerful new generation battery
switch appeal to both the installer and user. All ratings, footprints and
features of the Pro Installer-EZ-Mount switches match the high quality
of our standard switches.
FEATURES
■
■
■
■
■
■
■
■
■
■
■
■
■
Continuous rating: 400 Amp DC
Intermittent rating: 600 Amp (5 mins)
Cranking rating: 1500 Amp (10 secs)
Waterproof to IP66
Tinned copper 10 mm (3/8”)studs
Stainless steel washers/nuts
Fiber reinforced plastics
Same interconnection height as Pro Installer
Removable knob allows isolation during servicing
3 removable sideplates for protection
Industry standard 3.85” x 3.85” footpriny
Dimensions mm (“): 97.8 x 97.8 (3.85 x 3.85)
Tested to UL1107 ignition protection, CE
770-EZ-400A - 69149 A - On/off master switch EZ-MOUNT
770-DP-400A - 69952 Y - DOUBLE POLE, on/off master switch
770-DP-EZ-400A - 69953 A - DOUBLE POLE on/off master switch
EZ-MOUNT
770-S-EZ-400A - 69150 J - Selector battery switch EZ-MOUNT
771-S-400A - 69954 C - Selector battery switch
772-DBC-EZ-400A - 69889 U- Dual bank control battery switch
EZ-MOUNT
771-SFD-400A - 69955 E - Selector battery selector with alternator
switch disconnect
INDEX
770-EZ-400A
770-DP-400A - 770-DP-EZ-400A
771-S-400A - 770-S-EZ-400A
772-DBC-EZ-400A
771-SFD-400A
770-S-EZ-400A
UF
LE
X
BEP MARINE® - Z-BARS
This patent-pending, space saving buss bar range is a completely new
concept for marine cable termination. Offering almost unlimited
installation flexibility, the high and low level bars can be bussed
together with Z-Link, or used as separate positive/negative bars.
■ Modular sizing and common interconnection height: Easily linked
with other Pro Installer Busbars and Fuseholders to save installation
time and space
■ Clean installation—all cables can be run from one side of the Z-bar
■ Innovative clear covers insulate/protect on three sides, with “snap
outs” for extra cable access as required
■ Label recess on cover allows fitting up to ½” width (12.7mm)
printed labels
■ Insert molded studs offer superior mechanical strength
■ Designed for the harsh marine environment
777-BBZ18W-200
SPECIFICATIONS:
■
■
■
■
■
■
■
■
■
■
4x 6mm (1/4”) studs
10 x 4mm (5/32”) terminals
200A maximum per bar (2x 200A)
50 VDC
High temperature, fibre reinforced plastic base provides strength
and chemical resistance
Clear polycarbonate cover
Tinned CDA102 copper conductors, stainless steel studs/screws, and
nickel plated brass nuts for longevity in the marine environment
All threads are metric
Dimensions: 3.9" x 1.9" x 2.0" (98 x 49 x 51mm)
Weight: 6.7 Oz (189g)
TERMINAL
DIMENSIONS
mm (“)
777-BBZ10W-200
CONNECTING STUD
Q.TY
DIMENSIONS
mm (“)
MODEL
PART No.
Q.TY
777-BBZ18W-200
68864 W
18
4 (5/32)
4
777-BBZ10W-200
68865 Y
15
4 (5/32)
4
AMPS
DIMENSIONS
mm (“)
6x19 (1/4x3/4)
200A
147x49x51 (5.8x1.9x2.0)
6x19 (1/4x3/4)
200A
98x49x51 (3.9x1.9x2.0)
BATTERY DISTRIBUTION COMPONENTS
2.52
FEATURES:
INDEX
UF
LE
X
BATTERY DISTRIBUTION COMPONENTS
2.53
INDEX
BEP MARINE® - HEAVY-DUTY BUSBARS
Available in a broad range from 3-studs to 8-studs, Pro Installer
busbars offer the installer greater flexibility to select busbars to match
their load and space requirements. Compact footprints and modular
designs allow for space saving and scalability. Robust construction,
thicker copper conductors and additional mounting holes provide the
basis for secure, reliable, electrical installations.
The covers feature snap-out side skirts providing additional cable entry
as required, while the label recess provides the perfect landing for
handheld-printer labels. It’s easy linking to other Pro Installer products
because of the common interconnection height, and the radiused
busbar ends improve cable routing options for large cables.
FEATURES:
■ Modular sizing and common interconnection height: Easily linked
with other Pro Installer Busbars and Fuseholders to save installation
time and space
■ Radiused bar ends allow large cable attachment at any angle
between -90º and +90º, to improve installation flexibility. Generous
stud lengths
■ Innovative clear covers insulate/protect on three sides, with “snap
outs” for extra cable access as required
■ Label recess on cover allows fitting up to ½” width (12.7mm)
printed labels
■ Robust construction and additional mounting holes for ultimate
security
■ Designed for the harsh marine environment
■ Plated brass nuts and stainless steel studs prevent thread galling if
over-tightened
BUSBARS
SPECIFICATIONS:
■ 650A and 500A busbars 10mm (3/8”) stainless steel studs
■ 50 VDC
■ High temperature, fibre reinforced plastic base provides strength
and chemical resistance
■ Clear polycarbonate cover
■ Tinned CDA102 Copper conductors, stainless steel studs/screws, and
nickel plated brass nuts for longevity in the marine environment
■ All threads are metric
CONNECTING STUD
Q.TY
DIMENSIONS mm (“)
MODEL
PART No.
AMPS
DIMENSIONS mm (“)
777-BB8S-650
68860 M
8
10x25 (3/8x1)
650A
249x48x66 (9.8x1.9x2.6)
777-BB5S-650
68861 P
5
10x25 (3/8x1)
650A
147x48x66 (5.8x1.9x2.6)
777-BB3S-650
68862 S
3
10x22 (3/8x7/8)
650A
99x48x63.6 (3.9x1.9x2.5)
777-BB4S-500
68863 U
4
8x22 (5./16x7/8)
500A
99x48x63.5 (3.9x1.9x2.5)
UF
LE
X
BEP MARINE® - LINK BARS
Application example
Application
example
MAX
AMPS
DIMENSIONS
mm (“)
Short Link Bar
8 & 10mm studs
650
56x25 (2.2x1.0)
Medium Link Bar
650
69x25 (2.8x1.0)
650
74x25 (3.0x1.0)
Joins Z Bars E:E and S:S
250
49x12 (2.0x0.5)
400
53x25 (2.1x1.0)
MODEL
PART No.
DESCRIPTION
LINK
LB-1
69318 X
Link bar 31-34.7 mm
LB-2
69319 Z
Link bar 35.5-42.5 mm
DISTRIBUTION COMPONENTS
2.54
■ A range of linking bars complement the Pro Installer range of
products
■ High purity copper, tin plated for optimum marine electrical
performance
■ Fastest, most economic way of connecting for the most compact
installations
■ Saves space, allows clustering for the most compact installations
■ Links can be doubled for higher loads
8 & 10mm studs
LBJ-2
69320 H
Joiner 2-way 46-50 mm
Long Link Bar
8 & 10mm studs
LBZ-1
69321 K
Link Z Bar to Z Bar
LBZ-2
69322 M
Link Z Bar to Busbar
Joins Z Bars to
or Fuseholder
Busbar or FuseHolder
LBJ-3
69324 S
Joiner 3-way
Side to Side joiner 3 products
525
123x25 (4.9x1.0)
LBJ-4
69325 U
Joiner 4-way
Side to Side joiner 4 products
450
172x25 (6.9x1.0)
LBJ-5
69326 W
Joiner 5-way
Side to Side joiner 5 products
400
221x25 (8.8x1.0)
LBJ-6
69327 W
Joiner 6-way
Side to Side joiner 6 products
350
270x25 (10.8x1.0)
INDEX
UF
LE
X
DISTRIBUTION COMPONENTS
2.55
BEP MARINE® - LINK BARS
LINK BAR DIAGRAMS:
E:E End to End linking
S:E Side to End linking
S:S Side to Side joining
Gap For small gaps between
products
C Centerline linking
O Offset linking
FOR HIGH LOAD LINK JOINER APPLICATIONS
Links can be doubled for higher loads. Example: If 2 x 779-LBJ-5-B joiners are used in the
diagram at right, quoted Amps can be doubled: maximum of 1300 Amps to the adjacent
stud, or 1050 Amps to the stud 2 positions away from the feed cable.
Heavy Duty
Busbars
Z Busbars
Fuseholder
778ANL
Fuseholder
ANL
Fuseholder
ANL &
Single
insulated
Double
insulated
EZ Mount
battery
Class T
studs
studs
switch On/Off
BUSBARS
Heavy Duty Busbars
LB-1
LBZ-2
LB-1
-
LB-1 (4 Gap)
LB-2
S:E LB-1
Gap LB-1
O: LB-2
C: LB-1
Z Bars
LBZ-2
LBZ-1
LBZ-2
-
LBZ-2
-
Gap LBZ-2
LBZ-2
LB-1
LBZ-2
LB-2
-
LB-1
LB-2
S:E LB-1
O: LB-2
Gap LB-1
C: LB-1
-
-
FUSEHOLDER
778ANL
778ANLTP
-
-
-
LB-2
-
-
778ANL2S
LB-1
LBZ-2
LB-1
-
LB-1
LB-2
S:E LB-1
O: LB-2
Gap LB-1
C: LB-1
LB-1
LBJ-2
INSULATED STUDS
Single insulated stud
LB-2
-
LB-2
-
LB-2
LBJ-2
C: LB-2
Double insulated studs
S:E LB-1
Gap LBZ-2
Gap LB-1
S:E LB-1
-
S:E LB-1
Gap LB-1
-
Gap LB-1
LBZ-2
-
O: LB-2
C: LB-1
-
LB-2
LB-1
S:S LBJ-2
O: LB-1
Gap LB-1
C: Gap LB-1
O: LBJ-2
O: LB-1
LB-1
C: LB-1
C: LB-2
C: Gap LB-1
-
O: LB-1
LBJ-2
LB-1
-
-
C: LB-2
-
O: LB-2
O: LBJ-2
O: LB-1
-
C: LB-1
C: LB-2
C: Gap LB-1
EZ MOUNT BATTERY SWITCHES
EZ – ON/OFF
O: LB-2
LBZ-2
C: LB-1
EZ – Battery studs
LB-2 (4
LBZ-2
studs LB-1)
EZ – Common studs
O: LB-2
C: LB-1
INDEX
LBZ-2
O: LB-2
C: LB-1
UF
LE
X
BEP MARINE - INSULATED STUDS
®
The Pro Installer insulated studs are a smart
choice for marine installers. Increased stainless
steel stud length allows up to three large cable
lugs to be connected. The clear polycarbonate
cover provides insulation/protection, while the
snap-out side skirts allow for additional cable
entry. The power tapping plate variant provides
additional termination points for small cables.
2.56
■ Modular sizing and common interconnection
height: Easily linked with other Pro Installer
Busbars and Fuseholders saving installation
time and space
■ Power tapping plate converts from a single
stud, adding four connection points for
smaller cables, while preserving access for
larger cables
■ Generous stud lengths allow securing of three
95mm² (3/0) cable lugs
■ Innovative clear covers provide
insulation/protection, with “snap outs” for
extra cable access as required
■ Label recess on cover allows fitting up to ½”
width (12.7mm) printed labels
■ Snap out partition on double stud base
provides insulation to separate studs for
isolated (positive/negative) application.
Snapping this partition allows easy linking of
the studs
■ Insert moulded studs offer superior
mechanical strength
■ Four mounting holes in base allow installer
choice of using two, or four fastenings
depending on level of securing required
■ Designed for the harsh marine environment
DISTRIBUTION COMPONENTS
FEATURES:
IST-8MM-2S
IST-8MM-1SPT
SPECIFICATIONS:
■ Note: no power passes through the stud so no
amp rating is given
■ 50 VDC
■ High temperature, fiber reinforced plastic
base provides strength and chemical
resistance
■ Clear poly carbonate cover
■ Stainless steel studs/screws, and nickel plated
brass nuts for longevity in the marine
environment
■ All threads are metric
■ Double studs feature "snap out" insulating
partition, to allow linking of studs
MODEL
TERMINAL
SIZE
mm (“)
IST-8MM-1S
CONNECTING STUD
Q.TY
SIZE
mm (“)
PART No.
Q.TY
DIMENSIONS
mm (“)
IST-8MM-1S
68866 A
4
4 (5/32)
1
8x22 (5/16x7/8)
49x49x62 (1.9x1.9x2.5)
IST-8MM-1SPT
68867 C
4
4 (5/32)
1
8x22 (5/16x7/8)
49x49x62 (1.9x1.9x2.5)
IST-8MM-2S
68868 E
4
4 (5/32)
2
8x22 (5/16x7/8)
49x49x62 (1.9x1.9x2.5)
INDEX
UF
LE
X
DISTRIBUTION COMPONENTS
2.57
BEP MARINE® - ANL FUSEHOLDERS
Providing high-capacity fusing, fast response and high interrupt ratings
(ANL up to 3,000 Amps DC), these fuse holders are ideal for protecting
today’s demanding onboard power electronics technology including
inverters and battery chargers. They also protect wiring from short
circuits, for example as a main fuse to protect house circuits,
protection for digital switching main feed circuits, or heavy duty loads.
ANL fuses in the following sizes/ratings are suitable:
Bussmann 35A – 750A. 8mm (5/16”) hole for stud
Littelfuse 35A-500A. 10mm (3/8”) hole for stud, fits all Pro Installer
ANL fuseholders
778ANL2S
FEATURES:
■ Innovative through-panel mounting version (Patent Pending) offers
the user easy visual inspection of fuse state, and fast/safe access to
change fuse if blown
■ Modular sizing and common interconnection height: Easily linked
with other Pro Installer Busbars and Fuseholders saving installation
time and space
■ Durable construction allows fuses to run at maximum load
■ Radiused ends improve large cable routing options (can fit back-toback lugs at any angle -90º to +90º)
■ Innovative clear covers provide insulation/protection, with “snap
outs” for extra cable access as required
■ Fuse viewing “window” in cover aids visual inspection of fuse-state
■ Label recess on cover allows fitting up to ½” width (12.7mm)
printed labels
■ Insert moulded studs offer superior mechanical strength
■ Designed for the harsh marine environment
■ All threads are metric
778ANL
778ANLTP
SPECIFICATIONS:
■ Cable connection studs: Shared 8mm (5/16")
■ Fuse mounting studs: 8mm (5/16”). Also allows 10mm (3/8”) ANL
fuses to be used
■ Fuse type: ANL / ANN
■ Swinging fuse style allows changing fuse without removing
fastened nuts
■ Amperage: 35-300A
■ 50 VDC (or determined by fuse fitted)
■ High temperature, fibre reinforced plastic base provides strength
and chemical resistance
■ Clear poly carbonate cover
■ Stainless steel studs, and nickel plated brass nuts for longevity in the
marine environment
CONNECTING STUD
Q.TY
SIZE
mm (“)
MODEL
PART No.
FUSE
FUSE
STUDS
778ANL
68869 G
Bussmann 8 mm
8 mm
2 studs
8x22
(5/16”) - Prudenz
(5/16”)
shared with
(5/16x7/8)
o Siba 10 mm
778ANLTP
68870 R
AMPS
DIMENSIONS
mm (“)
300A
98x49x54 (3.9x1.9x2.1)
750A
98x49x36 (3.9x1.9x1.4)
750A
147x49x61 (5.8x1.9x2.4)
fuse
Bussmann 8 mm
8 mm
+2
10x25
(5/16”) - Prudenz
(5/16”)
per cable
(3/8x1)
Bussmann 8 mm
8 mm
+2
10x29
(5/16”) - Prudenz
(5/16”)
per cable
(3/8x1/8)
o Siba 10 mm
778ANL2S
68871 T
o Siba 10 mm
INDEX
UF
LE
X
BEP MARINE - CLASS T FUSEHOLDERS
®
Provide high-capacity fusing, with very fast response and very high
interrupt ratings (Class-T 20,000-50,000 Amps interrupt). These fuse
holders are ideal for protecting today’s demanding on board power
electronics technology including inverters and battery chargers. They
also protect wiring from short circuits, for example as a main fuse to
protect house circuits, where modern battery technologies such as
Lithium Ion and AGM, are capable of producing very high short circuit
currents.
DISTRIBUTION COMPONENTS
2.58
FEATURES:
■ Modular sizing and common interconnection height: Easily linked
with other Pro Installer Busbars and Fuseholders, saving installation
time and space
■ Durable construction allows fuses to run at maximum load
■ Radiused ends improve large cable routing options (can fit back-toback lugs at any angle -90º to +90º)
■ Innovative clear covers provide insulation/protection, with “snap
outs” for extra cable access as required
■ Label recess on cover allows fitting up to ½” width (12.7mm)
printed labels
■ Insert molded studs offer superior mechanical strength
■ Designed for the harsh marine environment
CLASS T
SPECIFICATIONS:
Cable connection studs: 10mm (3/8”) studs
Fuse mounting studs: 10mm (3/8”)
Fuse type: Class T (JLLN / TJN / A3T)
Maximum amperage: 400A
50 VDC
High temperature, fiber reinforced plastic base provides strength
and chemical resistance
■ Clear poly carbonate cover
■ Tinned CDA102 copper conductors, stainless steel studs, and nickel
plated brass nuts for longevity in the marine environment
■ All threads are metric
■
■
■
■
■
■
CONNECTING STUDS
Q.TY
SIZE
mm (“)
MODEL
PART No.
FUSE
FUSE
STUDS
778T2S-400
68872 V
Class T
10 mm
+2
225A-400A
(3/8”)
Class T
450A-600A
778T2S-600
68873 X
AMPS
DIMENSIONS
mm (“)
10x29
225A -
147x49x61 (5.8x1.9x2.4)
for cables
(3/8x1/8)
400A
12 mm
+2
10x29
400A -
(0.47”)
for cables
(3/8x1/8)
600A
147x49x61 (5.8x1.9x2.4)
INDEX
UF
LE
X
FRONIUS® - GRID-CONNECTED INVERTERS
The solar energy is converted into current and fed into the public grid. The core of each photovoltaic system consists of
efficient, reliable and high-performance inverters. To develop technologies for photovoltaic inverters, Fronius has
thoroughly studied, sought innovative solutions and find answers entirely new. The result: grid-connected inverters
highly functional, perfect for use with any type of solar modules.
FRONIUS IG PLUS
GRID-CONNECTED INVERTERS
2.59
■ Versatile, reliable, multipurpose inverter. A new concept that provides maximum gains. In all
weather conditions.
FRONIUS CL
■ Centralized inverter with Fronius Mix concept. Modular system allows for maximum
efficiency.
FRONIUS AGILO
■ Three-phase centralized inverter with revolutionaries installation system and transportation..
ACCESSORIES
■ Accessories and components for solar systems with Fronius inverters.
FRONIUS SOLAR.WEB APP
■ Free applications to display easily and fastly PV systems data.
EXTENDED WARRANTY
■ Extended warranty available: 10, 15 or 20 years.
For more information about configuration and size, please contact our Technical Service.
INDEX
ABB® - GRID-CONNECTED INVERTERS
UF
LE
X
STRING INVERTERS
Products for PV panels
Aurora Uno (single-phase)
■ The single-phase photovoltaic inverters between 2kW and 6kW are most suitable for
residential and small industrial and trade installations.
Aurora Trio (three-phase)
■ The three-phase string inverters 6 kW or more are especially suitable for industrial and trade
installations.
CENTRALIZED INVERTERS
Aurora Plus
■ Aurora central inverters for industrial and trade PV installations are designed for large PV
systems, such as industrial facilities and buildings or ground systems.
Aurora Ultra
2.60
GRID-CONNECTED INVERTERS
■ Products for single solar panels
■ 1.4MW Ultra is designed with the purpose of serving large utilities. It is liquid cooled and is
the largest PV inverter, in terms of power output, available on the market.
WIND INVERTERS
Aurora Wind
■ The ABB Aurora Inverters use an algorithm of the power curve optimized to increase the
energy produced by wind turbines.
For more information about configuration and size, please contact our Technical Service.
INDEX
UF
LE
X
WHISPER POWER® - TOP QUALITY SYSTEMS
WhisperPower offers efficient, clean and exceptionally quiet power systems. Each product is characterised by its sustainable and reliable operation and exceptionally long life span.
BASIC CONFORT SYSTEM WITHOUT GENERATOR
TOP QUALITY SYSTEMS
3.1
The Basic Confort system consists of a 3.5 kW
Whisper Power Centre sine wave inverter/battery
Charger, a remote control panel with energy monitor,
shore connection with isolation transformer
(optional)
and a set of long-life GEL power batteries.
Note: The Basic Confort System is also available with
generator
ADVANCED
SYSTEM
The Advanced system consists of a variable speed
Generator, GENVERTER 7i,that supplies 24V to the
onboard batteries and/or 230 VAC power via the
WPC (Whisper Power Centre) inverter/battery
charger, Power System Control Panel with built-in
battery monitor and a set of GEL batteries.
It can feed the complete DC and AC board system.
Total 230 VAC power rating is 7 kW. ‘Silent power’ is
supplied by the highly reliable and efficient sine
wave inverter (3.5 kW) that can also serve as a
booster in case of limited shore power availability,
The three-stage battery charger supplies a charge
current up to 90 A.
The system enables complete plug & play installation
and considerable savings in fuel consumption.
Also available for 12 VDC and 48 VDC batteries.
INDEX
ADMIRAL SYSTEM
The Admiral System has been developed for
yachts and small Professional vessels longer
then 12 metres.
Its total capacity is 9.5 kW with sufficient peak
power to start Inductive loads.
It is based on the super silent whisper Power
SQ6, 1500 rpm generator, of which the AC
output is connected directly to the
WhisperPower Centre. Additionally, the
WhisperPower Center has a shore connection,
with the option of a an isolation transformer.
The Power System Control Panel (PSCP) controls
both the Whisper generator and the 3.5 kW
Whisper
Power Centre inverter/battery charger.
A shortage of shore power can be
compensated by the Whisper Power Centre via
the batteries.
The system is equipped with Whisper Power
High Density deep cycle AGM batteries for 700
full cycles.
UF
LE
X
3.2
TOP QUALITY SYSTEMS
WHISPER POWER® - TOP QUALITY SYSTEMS
ROYAL SYSTEM
The Royal System offers the perfect solution
for yachts and professional vessels longer then
16 metres.
It is based on the WhisperPower SQ 12 (12 kW)
basic generator, linked to two parallel
connected Whisper Power Centres of 3.5 kW.
The total system capacity is nearly 20 kW, while
the ‘Silent power’ is 7 kW and the charge
capacity 180 A.
The system can also be configured as a 3 phase
(3x400 VAC) power system, with 3 Power
Centres connected in parallel.
Royal Systems are normally supplied with
2-VOLT GEL power traction batteries.
INDEX
UF
LE
X
WHISPER POWER® - CENTRE
WPC - WHISPER POWER CENTRE
Combined charger/sine wave inverter
WPC-2000-12; WPC-3500-24;
WPC-7000-24; WPC-4000-48; WPC-8000-48
WPC – WHISPER POWER CENTRE
3.3
■
■
■
■
■
■
■
■
■
Combined charger and sine wave inverter
Power support function (smart-boost)
High efficiency (93-96%)
Superior start-up power
Dual input: generator and grid/shore input
Dual output: high power & inverter output
Seamless AC source switching
Available for 12, 24 and 48 VDC
Conformity:
Directive EMC:2004/108/EC: EN 61000-6-1, EN 610000-6-3, EN 55014,
EN 55022, EN 61000-3-2, 62040-2. Low voltage directive 2006/95/EC:
EN62040- 1-1, EN 50091-2, EN 60950-1
WPC
MODEL
WPC-2000-12
WPC-3500-24
WPC-7000-24
WPC-10000-24
WPC-4000-48
WPC-8000-48
Part No.
68248 X
68249 Z
68549 M
68550 W
68250 H
68551 Y
9.5 – 17 VDC
19 - 34 VDC
19 - 34 VDC
19 - 34 VDC
38 – 68 VDC
38 – 68 VDC
Continuous power @ 25°C
2000 VA
3000 VA
7000 VA
10000 VA
3500 VA
8000 VA
Power 5 sec @ 25°C
6000 VA
9000 VA
18000 VA
20000 VA
10500 VA
21000 VA
Inverter
Input voltage range
Output voltage
Pure sine wave 230 VAC (+/- 2%)
380 V 3ph
230 VAC (+/- 2%)
380 V 3ph
150-250 V (45-65 Hz)
Battery Charger
AC power
Maximum charging current
150-250 V 100 A
90 A
Charge characteristics
Dimensions
H x W x D mm (“)
Weight Kg (lbs)
45-65 Hz
180 A
270 A
50 A
100 A
6 step Bulk - Absorption - Floating - Equalization Reduced floating - Periodic absorption
510 x 330 x 150
(20.0 x 13.0 x 5.9)
25 (55.1)
28 (61.7)
2 x WPC
3500-24
3 x WPC
3500-24
510 x 330 x 150
(20.0 x 13.0 x 5.9)
2 x WPC
4000-48
56 (123.4)
84 (185.2)
28 (61.7)
56 (123.4)
WPC-PSCP - 68253P - POWER SYSTEM CONTROL PANEL
Easy to connect remote panel for use with Whisper generators
and WPC
■ Standard supplied with Genverter 7i
■ LCD displays and backlights. Integrated data logger with SD card
storage
WPC - PSCP
WPC - ACCESSORIES
WPC-RCC - 68254 S Remote Combi Control
WPC-BSI
- 68255 U 500 Battery Status Interface
WPC-RS232 - 68256 W Serial Interface
WPC-BTS
- 68257 Y Battery Temperature Sensor
BSI
INDEX
UF
LE
X
WHISPER POWER®
PROFESSIONAL BATTERY CHARGERS AND INVERTERS
DC POWERCUBE:
DC INVERTERS AND BATTERY CHARGERS WITH SECOND INPUT
WhisperPower has developed a unique “one box” hybrid integrated power solution, designed to
provide independent power to pleasure yachts, commercial craft, remote homes, specialty vehicles and
RV’s. The WP-DC PowerCube combines battery charging and diesel power generation in one enclosure.
DC POWERCUBE
24/150
DC POWERCUBE
48/80
Part No.
68553 C
68554 E
24 V
48 V
Output current
0-150 A
0-100 A
Dimensions mm (“)
575 x 221 x 316 (22.6x8.7x12.4)
Weight kg (lbs)
21 (46.3)
Nominal battery voltage
21 (46.3)
AC POWERCUBE:
PROFESSIONAL PURE SINE WAVE INVERTERS
Powerful and reliable inverter suitable for
even the most severe applications, they
can ensure high power even with high
temperatures
MODEL
AC POWERCUBE
24/7000
Part No.
68562 D
Battery input
■ Power peak 200% for 5 seconds
■ High efficiency (93-96%)
■ Remote panel included
24 V
Continuous power @ 40° C
7000 VA
Peak power (20 sec)
15000 VA
Output voltage
Pure sine wave
230 VAC (+/- 2%)
or 120 VAC
WP-COMBI SERIES INVERTER/BATTERY CHARGER
Pure sine wave inverter with
integrated battery charger.
It provides 230V AC 50Hz
electric power anywhere,
even without the generator.
MODEL
WP-COMBI
12/2000-80
WP-COMBI
24/3000-60
WP-COMBI
48/3000-30
Part No.
68264 V
68265 X
68266 Z
Inverter
Nominal battery voltage
■ Up to 3 kW 230 VAC / 50 Hz power
■ High peak power, useful for A/C starting
units
■ Ideal to operate with solar and wind
systems
■ Automatic switching from shore/land
power to inverter power
■ Power input adjustable by grid or
generator
■ Fully automatic three-stage battery
charging with temperature control. Second
output for starting battery
■ Available for 12, 24 or 48 VDC batteries
■ Supplied with remote control panel
Pure sine wave
12 VDC
24 VDC
48 VDC
10..16 VDC
20..35 VDC
40..65 VDC
Power 30 min. @ 25°C
2000 VA
3000 VA
3000 VA
Continuous power @ 40°C
1800 VA
2600 VA
2600 VA
Power 20 sec. @ 25°C
3000 VA
4500 VA
4500 VA
Efficiency @ full load
88%
88%
88%
Input voltage
range
Output voltage
230 VAC +/- 3%
Charge characteristic
IUU multi step
Max charging current
Max input current
Max input current
80A (adjustable)
30A (adjustable)
196..265VAC (mode UPS) 170..265VAC (mode GEN)
30A (protected by internal circuit breaker)
Dimensions mm (“)
Weight kg (LBS)
60A (adjustable)
3.4
HEAVY DUTY BATTERY CHARGERS AND INVERTERS
■ Second DC output to charge auxiliary battery (20 A)
■ Second DC PowerCube (9 kW)
■ Supported battery types: open and sealed lead acid: GEL,
AGM, Traction, Lithium-ion
■ Three step charge characteristic with temperature sensor
■ High efficiency (>90%)
■ WhisperConnect (CANbus) connection
■ Remote panel included
MODEL
458 x 218 x 190 (18.0 x 8.6 x 7.5)
18,5 (40.8)
22,5 (49.6)
22,5 (49.6)
INDEX
UF
LE
X
WHISPER POWER® - WP-DC BELTPOWER
DC BELT POWER SYSTEMS
Power generation for 12 or 24V DC
systems, with ACR regulator
BELT GENERATORS / ALTERNATORS
3.5
■ It can be installed as a second alternator and
dedicated to the service battery bank
■ Ensures high currents even at low engine
rpm
■ Three step charge algorithm, suitable for
GEL, AGM and “wet” batteries
■ Available pulleys for flat belt or V belt
■ WhisperConnect (CANbus) connection
DC Belt power
MODEL
WP-DC
BELTPOWER
12-90
WP-DC
BELTPOWER
12-130
WP-DC
BELTPOWER
12-160
WP-DC
BELTPOWER
24-75
WP-DC
BELTPOWER
24-110
WP-DC
BELTPOWER
24-150
Part No.
68566 M
68567 P
68568 S
68569 U
68570 C
68571 E
Battery voltage
12 V
12 V
12 V
24 V
24 V
24 V
Output current
0-90 A
0-130 A
0-160 A
0-75 A
0-110 A
0-150 A
Power (continuous)
1080 W
1800 W
2640 W
3600 W
Regulator
Dimensions mm (“)
Dry weight kg (lbs)
INDEX
1560 W
1920 W
ACR with 3 step charge and temperature sensor
195 x 205 x 140
250 x 225 x 175
250 x 225 x 175
250 x 225 x 175
250 x 225 x 175
250 x 250 x 185
(7.7 x 8.1 x 5.5)
(9.8 x 8.7 x 6.9)
(9.8 x 8.7 x 6.9)
(9.8 x 8.7 x 6.9)
(9.8 x 8.7 x 6.9)
(9.8 x 9.8 x 7.3)
5.5 (12.1)
10.1 (22.3)
10.1 (22.3)
10.1 (22.3)
10.1 (22.3)
13.1 (28.9)
UF
LE
X
WHISPER POWER® - WP-DC BELTPOWER
ACR – ALTERNATOR CHARGE REGULATOR
Available 12V or 24V version
Extends battery life considerable
Three step charge algorithm and temperature monitoring
Supported battery types: open and sealed lead acid: GEL,
AGM, Traction
■ Temperature sensor included
■ WhisperConnect (CANbus) connection
■
■
■
■
ACR
MODEL
WP-ACR
12V
WP-ACR
24V
Part No.
68727 K
68728 M
-20 .. 80°C
-20 .. 80°C
Operating temperature range
Dimensions mm (“)
117 x 120 x 27 (4.6 x 4.7 x 1.1)
117 x 120 x 27 (4.6 x 4.7 x 1.1)
0.4 (0.9)
0.4 (0.9)
Weight kg (lbs)
Remote Panel for
WPC Power Centre
AC BELT POWER SYSTEMS
with 230V/50Hz inverters
W-BD 5
BeltPower
Inverter 5 kW
(or existing
Dometic box)
Landline
Input
Limiter (A)
WPC Power Centre
Output 1 - Inverter output 230V - 50Hz
3.5 kW
on batteries
W-BD 5 BeltPower
Alternator 5 kW
(direct driven by engine,
also during driving)
230VAC / 50 Hz
The alternator is connected with an inverter which
provides a pure sine wave at 230V for marine, RV’s
and special applications.
■ 3,5 and 5 kW at 230Vac professional systems
■ Stable, sine wave power at variable speed
■ High efficient and compact generator solution
■ Easy to install
■ It can be used with Combi or WhisperPowerCentre
for night operation with batteries
4
6
12
16
Output 2 - Heavy user output 230V - 50Hz
min. 7
AC in
+
Land
Connection
230VAC / 50 Hz
kW
BeltPower + Inverter power
BELT GENERATORS / ALTERNATORS
3.6
–
AC in
AGM battery 6V
390Ah HD (4pcs.)
High Density,
Capacity 390Ah-24V
Weight: 218 Kg
MODELLO
AC belt power
WP-AC
BELTPOWER 3,5
WP-AC
BELTPOWER 5
Codice
67923 E
67924 G
Potenza
3,5 kW
5 kW
Tensione
230 V AC / 50 Hz
230 V AC / 50 Hz
ACCESSORIES
Remote control panel – 68744 K
5 m (16.4 ft) shielded power supply cable – 68746 P
5 m (16.4 ft) remote control panel cable – 68745 M
Pulley poly 6 groove (Ø 60 mm – 2.36” recommended) – 68880 U
Pulley poly 6 groove (Ø 50 mm – 1.97”) – 68573 J
INDEX
UF
LE
X
VARIABLE SPEED DIESEL GENERATORS
3.7
WHISPER POWER® - VARIABLE SPEED DIESEL GENERATORS
W-GV4 BASIC GENVERTER
W-GV8 BASIC GENVERTER
■ Variable speed 2500 – 3400 rpm
■ Permanent magnet fly wheel integrated
alternator
■ Liquid cooled
■ High efficiency & fuel saving
■ Low noise
■ Ultra compact & light weight
■ 3,4 kW output power, 230 VAC – 50 Hz
■ Cooler integrated
■
■
■
■
■
■
■
■
■
■
Variable speed 1500 – 2800 rpm
Kubota dual cylinder engine
Minimal vibration and ultra quiet
Permanent magnet fly wheel integrated alternator
Liquid cooling of engine and alternator
High efficiency & fuel saving
Ultra compact & light weight
7,4 kW output power (7 kVA if 230V/50Hz)
It can be connected directly to DC PowerCube
Version with 24V or 48V output is available, to charge
battery banks of hybrid systems
MODEL
W-GV4 BASIC
W-GV4 PICCOLO
W-GV8 BASIC
Part No.
67707 Y
69831 K
68575 N
Continuous output
3.4 kW
3.4 kW
7 kW
Max output power
36 A
36 A
65 A
230 V / 50 Hz
230 VAC / 50Hz
230 VAC / 50Hz
AC System
Output voltage/frequency
Alternator
permanent magnet, liquid cooling
W-GV4
RPM range
2400-3600 rpm
2400-3600 rpm
1500-2800 rpm
Efficiency
94%
94%
94%
Whisper WP1
Whisper WP1
Kubota
1
1
2
300 cc
300 cc
600 cc
Diesel Engine
Engine model
Number of cylinders
Cylinder capacity
Engine cooling
Fuel consumption
(no load –full load)
indirect water cooling indirect water cooling indirect water cooling
0,8 – 1,5 l/hr
0,8 – 1,5 l/hr
1,2 – 2,5 l/hr
12 V /55 Ah (opt)
12 V /55 Ah (opt)
12 V /100 Ah (opt)
included
included
included
Dimensions L x W x H
630 x 480 x 520
470 x 450 x 520
690 x 550 x 580
(incl. cab.) mm (“)
(24.8x18.9x20.5)
(18.5x17.7x20.5)
(27.1x21.6x22.8)
Starter battery
12V battery charger
Dimensions inverter PMG
mm (“)
Dry weight kg (lbs)
92 (202.8)
420 x 148 x 1961
(16.5 x 5.8 x 77.2)
76 (167.5)
173 (381.4)
W-GV8
W-GV4 PICCOLO
Variable speed diesel generator
■ The GV4 Piccolo is the result of years of development aimed to produce the
smallest (76kg), quietest and cleanest generator
■ Continuous power: 4 kVA/3,4 kW @ 3000 rpm
■ Adjustable speed settings for an optimal performance/vibratio set
■ Permanent Magnets Flywheel for the highest efficiency
■ Inverter inthe output ensures perfectly stable frequency and voltage
■ Low noise thanks to the fully closed case (only 54 dBA @ 7 m)
■ Indirect water cooling
■ Delivered as standard with mechanically adjustable speed and basic start/stop panel
■ Available with automatic speed control (actuator) 2400-3600 rpm and DDC panel
W-GV4
PICCOLO
DDC PANEL - 67502 D
Digital remote panel with accurate read-out of Volt/A/Hz/Load, time to service, including
auto-start stop function. Supplied as standard with all Genverter Whisper generators.
INDEX
UF
LE
X
WHISPER POWER® - M-GV 7I INVERTER
W-GV 7i GENVERTER
Variable speed hybrid generator
Part No.
W-GV 7i
68576 R (12 V)
Variable speed
Combined system output
2400–3400 rpm
5,4 - 6,9 – 7,4 kVA (to 12 – 24 V)
Generator power (running engine)
Silent power (inverter mode)
68577 T (24 V)
3,4 kVA
2 – 3,5 – 4 kWA to 12V or 24 VDC
Inverter / Generator
Peak output AC
33 A (generator) + 27/45/51 A (inverter)
Nominal voltage
230 Vac
Nominal current AC (combined)
16,5 A (generator) + 9/15/17 A (inverter)
Nominal frequency AC
50.0 Hz
Leading or lagging power factor
0,1 - 1
Parallel use (multiple system)
max 2 units
Capacity (starter) battery (AGM)
12 V 55 Ah
Starter battery charge current
■ 3.4 kW/230VAC diesel generator
■ 3.5 kW/230VAC sine wave inverter
■ Built-in charger for 12 or 24V DC
batteries
■ Land power connection
■ Variable speed 2500-3400 rpm
■ Fully automatic operation
■ Silent, liquid cooled diesel engine
■ Plug & Play installation
■ Combined output 6 kVA cont./
7 kVA max (24V models)
5 A (3-step charger)
Battery charger
Charge current
Charge characteristic
12 V 100 A, 24 V 90 A
6-step charger completely adjustable
AC Shorepower
190 – 260 Vac
Temperature sensor
Yes
Mechanical specification
Cooling
indirect watercooling
Max operation angle Iin all directions)
25°
Temperature range operational
Relative umidity
W-GV 7i
-20° to 60 °C
max 95% rel. umidity, none condensing
Remote control
WPC-PSCP panel
Diesel engine
Engine model
Whisper WP1
Number of cylinders
1
Cylinder capacity
300 cc
Air consumption
0.42 m3/min @ 3000 rpm
Engine cooling
Fuel consumption (no load-full load)
Dimensions & Weight
L x W x H mm
Dry weight kg (lbs)
Dry exhaust pipe
3.8
VARIABLE SPEED DIESEL GENERATORS
MODEL
M-GV 7I DIESEL GENERATOR + INVERTER +
BATTERY CHARGER
indirect watercooling
0.8- 1.5 litres/hour
Generator
WhisperPowerCentre
630 x 480 x 520
500 x 360 x 300
(24.8 x 18.9 x 20.5)
(19.7 x 14.2 x 11.8)
92 (202.8)
25 (55.1)
Ø 1⅝ inch BSP inner thread
WPC-PSCP 68253 P
Power System control panel
Combined remote control and monitoring panel for Whisper Power
generators and Genverter Series.
WPC-PSCP
INDEX
UF
LE
X
WHISPER POWER® - FIXED RPM DIESEL GENERATORS
3000 RPM SERIES W-SC AND 1500 RPM SERIES W-SQ FIXED RPM DIESEL GENERATORS
The 3000 RPM M-SC Series range includes 3.5, 5.0, 6.5 and 9 kW generators
The 1500 RPM M-SQ Series offers a range from 5.7kW to 25.0 kW generators
FIXED RPM DIESEL GENERATORS
3.9
As an option to the metal sound shield, a polyester soundproof casing is available for all the M-SC Series generators (MSC3.5 excepted: a polyester sound shield available only)
Main features: continuous performance, efficient sound proofing, vibration-free, water cooling system, advanced
control system, easy access to all vital parts, pre-fab connections for easy installation, CAN bus for local or remote
connection.
All generators are supplied with the digital control panel DDC Panel
W-SC3
W-SC6
Polyester sound shield
WPC
DDC PANEL - 67502 D
W-SQ 8
INDEX
W-SQ 27
Digital remote panel with accurate
read-out of Volt/A/Hz/Load, time to
service, including auto-start stop
function. Supplied as standard with
all Whisper generators.
UF
LE
X
W-SC3
W-SC6
W-SC10
PART No. (Polyester Casing
68585 S
68593 R (W-SC6P)
-
PART No. (Metallic Casing)
-
68586 U (W-SC6)
6775 6M
Nominal power*
3 kW
5 kW
9 kW
Nominal voltage
230 V – 13 A
230 V – 22 A
230 V – 39 A
Output frequency
50 Hz
50 Hz
50 Hz
1
1
1
Capacitor
Capacitor
Capacitor
± 6%
± 5%
± 5%
GENERAL SPECIFICATIONS
Power factor / cos phi
Voltage regulation
Voltage tolerance (V)
Frequency regulation
Frequency tolerance (Hz)
Starter battery, AGM type, optional
Battery charge current
Dimensions with sound shield mm (“)
Dry weight kg (lbs)
Ø Wet marine exhaust
Ø Dry exhaust pipe
Electronic governor
± 5%
± 5%
± 1%
12 V – 55 Ah
12 V – 85 Ah
12 V – 85 Ah
Auxiliary winding 4 A
Alternator 40 A
Alternator 40 A
505 x 400 x 500
690 x 525 x 520
804 x 525 680
(19.9 x 15.7 x 19.7)
(27.2 x 20.7 x 20.5)
(31.6 x 20.7 x 26.8)
97 (213.8)
178 (392.4)
210 (463.0)
40 mm (1.6”)
40 mm (1.6”)
40 mm (1.6”)
1” BSP
1” BSP
1” BSP
Location oil refill cap
Top & side
Max. operating angle
25° in all directions
Alternator
Sound level at 7 m (dBA)
3.10
DIESEL GENERATORS
WHISPER POWER® - 3000 RPM W-SC SERIES
Water-cooled, no brushes, synchronous
56.2
56.2
59.3
OC60
L2E
L3E
1
2
3
276 cc
635 cc
952 cc
72 x 68 (2.8 x 2.7)
2 x 76 x 70 (0.1 x 3.0 x 2.76)
3 x 76 x 70 (0.12 x 3.0 x 2.76)
0,38 m /min
0,95 m /min
1,43 m3/min
Oil-cooled indirect
Watercooling
Watercooling
0,7-1,2 l/hour
1-2,5 l/hour
1-4 l/hour
10-12 l/min
18 l/min
18 l/min
SPECIFICATIONS DIESEL ENGINE
Engine model
Number of cylinders
Cylinder capacity
Bore & stroke mm (“)
Air consumption
Engine cooling
Fuel consumption (no load - full load)
Pump capacity
3
3
ACCESSORIES
Remote control panel
Additional remote control panel
Digital Diesel Control
Optional
Optional
Optional
7” touch screen
No
Optional
Optional
Power Take (PTO)
No
No
No
Three phase version
No
No
No
* Peak power: 200%. Rating based on engine performance in conformity with ISO 3046; pressure 100 pKa, humidity 30%,
temperature 25°C. Rating and tolerances of electric parameters are based on power factor 1.
INDEX
UF
LE
X
WHISPER POWER® - 1500 RPM W-SQ SERIES DIESEL GENERATORS
DIESEL GENERATORS
3.11
W-SQ6
PART No.
W-SQ8
W-SQ12
68579 X
68580 F
68581 H
Nominal power 50 Hz*
5,7 kW
8 kW
12 kW
Nominale voltage 50 Hz
230 V single phase – 25 A
230 V single phase – 35 A
230 V single phase – 52 A
50 Hz
50 Hz
50 Hz
n.d.
n.d.
AVR, ± 2% tolerance
GENERAL SPECIFICATIONS
Output frequency
Three phase voltage regulation**
Voltage tolerance
Frequency tolerance
± 5% electronic governor
± 1% electronic governor
± 5 % electronic governor
± 1% electronic governor
12 V – 70 Ah
12 V – 70 Ah
12 V – 70 Ah
Battery charge current
Alternator 40 A
Alternator 50 A
Alternator 50 A
Dim. with soundproof box
805 x 525 x 580
900 x 575 x 640
1060 x 575 x 640
(31.7 x 20.7 x 22.8)
(35.4 x 22.6 x 25.3)
(41.7 x 22.6 x 25.2)
240 (529.1)
334 (736.3)
380 (837.8)
40 mm (1.6”)
51 mm (2.0”)
51 mm (2.0”)
Starter battery, AGM type, (optional)
mm (“)
Dry weight kg (lbs)
Ø wet marine exhaust
Oil refill cap location
Top & Side
Max. operating angle
25° in all directions
Alternator
Sound level (dBA)
Water-cooled, no brushes, synchronous
51.9
54.8
55.7
Engine model/N° of cylinders
L3E / 3
S3L2 / 3
S4L2 / 4
Cylinder capacity
952 cc
1318 cc
1758 cc
DIESEL ENGINE SPECIFICATIONS
Bore & stroke mm (“)
Air consumption
3 x 76 x 70 (0.12 x 3.0 x 2.76) 3 x 78 x 92 (0.12 x 3.1 x 3.6)
0,8 m /min
3
Engine cooling
Fuel consumption (no load-full load)
Pump capacity
1,1 m /min
3
4 x 78 x 92 (0.16 x 3.1 x 3.6)
1,5 m3/min
Indirect water-cooled
1-3 l/hours
1-3 l/hours
1-4 l/hours
15 l/min
18 l/min
18 l/min
ACCESSORIES
Remote control panel (standard)
Digital Diesel Control
Additional remote control panel
Optional
Optional
Optional
7” touch screen
Optional
Optional
Optional
Power Take Off (PTO)
NO
Optional***
Optional***
Three phase version
n.d.
n.d.
Yes
* Peak capacity: 200%. %. Rating based on engine performance in conformity with ISO 3046; pressure 100 pKa, humidity 30%,
temperature 25°C. Rating and tolerances of electric parameters are based on power factor 1.
** Three phase generators are air-cooled
*** Power take off (PTO) with SAE A or SAE B flange.
INDEX
UF
LE
X
W-SQ16
W-SQ20
W-SQ27
68582 K
68583 M
68584 P
Nominal power 50 Hz*
16 kW
20 kW
25 kW
Nominal voltage 50 Hz
230 V single phase – 70 A
230 V single phase - 86 A
230 V single phase – 108 A
50 Hz
50 Hz
50 Hz
PART No.
GENERAL SPECIFICATIONS
Output frequency
Three phase voltage regulation**
Voltage tolerance
AVR, ± 2% tolerance
± 5% electronic governor
Frequency tolerance
Starter battery, AGM type, (optional)
Battery charge current
± 2% electronic governor
± 2% electronic governor
± 3% electronic governor
12 V – 120 Ah
12 V – 160 Ah
12 V – 160 Ah
Alternator 50 A
Alternator 50 A
Alternator 50 A
Dim. with soundproof box
1060 x 575 x 640
1260 x 680 x 800
1260 x 680 x 800
mm (“)
(41.7 x 22.6 x 25.2)
(49.6 x 26.8 x 31.5)
(49.6 x 26.8 x 31.5)
Dry weight kg (lbs)
454 (1001)
580 (1278.7)
580 (1278.7)
Ø wet marine exhaust
51 mm (2”)
63 mm (2.5”)
63 mm (2.5”)
Oil refill cap location
Top & Side
Max. operating angle
25° in all directions
Alternator
Sound level (dBA)
3.12
DIESEL GENERATORS
WHISPER POWER® - 1500 RPM W-SQ SERIES DIESEL GENERATORS
Water-cooled, no brushes, synchronous
56.1
58.3
58.3
Engine model/N° of cylinders
S4Q2 / 4
S4S / 4
S4S / 4
Cylinder capacity
2505 cc
3331 cc
3331 cc
4 x 88 x 103 (0.2 x 3.5 x 4.0)
4 x 94 x 120 (0.2 x 3.7 x 4.7)
4 x 94 x 120 (0.2 x 3.7 x 4.7)
2,1 m3/min
2,8 m3/min
2,8 m3/min
Indirect water-cooled
Indirect water-cooled
Indirect water-cooled
1-5 l/hours
1-6 l/hours
1-8 l/hours
22 l/min
22 l/min
22 l/min
DIESEL ENGINE SPECIFICATIONS
Bore & stroke mm (“)
Air consumption
Engine cooling
Fuel consumption (no load-full load)
Pump capacity
ACCESSORIES
Remote control panel (standard)
Digital Diesel Control
Additional remote control panel
Optional
Optional
Optional
7” touch screen
Optional
Optional
Optional
Power Take Off (PTO)
Optional***
Optional***
Optional***
Three phase version
Yes
Yes
Yes
* Peak capacity: 200%. %. Rating based on engine performance in conformity with ISO 3046; pressure 100 pKa, humidity 30%,
temperature 25°C. Rating and tolerances of electric parameters are based on power factor 1.
** Three phase generators are air-cooled
*** Power take off (PTO) with SAE A or SAE B flange.
INDEX
UF
LE
X
WHISPER POWER® - INSTALLATION ACCESSORIES
WhisperPower provides a range of kits to make installation faster and easier.
Service kits are available too: the A kit for easier and more frequent maintenance and the B kit for larger maintenance.
FUEL KITS
DIESEL GENERATORS
3.13
67432 J - Fuel kits consist of fuel filter, water separator, hose clamps and couplings for all
Whisper Power® generators.
EXHAUST KITS
68587 W - 1” exhaust kit for W-GV4, W-GV7i and W-GV8
68589 A - 1” exhaust kit for W-SC6 and W-SC6P
68588 Y - 1” exhaust kit with stainless steel silencer for W-GV4, W-GV7i, W-GV8, W-SC6 and W-SC6P
67758 S - 1 ½” exhaust kit for W-SC10, W-SQ6, W-SQ8, W-SQ12 and W-SQ16
68597 Z - 2” exhaust kit for W-SQ20 and W-SQ25
RADIATOR KITS
68590 J - Radiator kit for engine cooling for W-SC6, W-SC6P and W-SQ6
68591 L - Radiator kit for engine cooling for W-SC6, W-SC6P, W-SC10, W-SQ6, W-SQ8 and W-SQ12
68594 T - Radiator kit for engine cooling for W-SC10 and W-SQ8
68595 V - Radiator kit for engine cooling for W-SQ12 and W-SQ16
68596 X - Radiator kit for engine cooling for W-SQ16
68598 B - Radiator kit for engine cooling for W-SQ20 and W-SQ25
FAN CONTROL KITS
68592 N - Double speed fan control kit for W-SC6, W-SC6P, W-SC10, W-SQ6, W-SQ8, W-SQ12 and
W-SQ16
“WHISPERPOWER TOP-COOL” RADIATOR
Supplied with brackets and expansion tank. To be used with both engine and generator.
68599 D - TOP-COOL radiator for W-SC6 and W-SQ6
67757 P - TOP-COOL radiator for W-SC10
68600 J - TOP-COOL radiator for W-SQ8
68601 L - TOP-COOL radiator for W-SQ12
68602 N - TOP-COOL radiator for W-SQ16
68603 R - TOP-COOL radiator for threephase W-SQ12 and threephase W-SQ16
68604 T - TOP-COOL radiator for W-SQ20 e W-SQ25
NOTE: The W-SQ12, W-SQ16, W-SQ20 e W-SQ25 generaotrs can be supplied with PTO for hyraulic setting and with
threephase output (3 x 230/400V). Specify required technical features when ordering.
SERVICE KITS
The A KIT includes filters a V-belts
The B KIT includes seals and various mechanical parts
Specify type of generator when ordering.
INDEX
UF
LE
X
WHISPER POWER® - BATTERIES
AGM - 12 V BATTERIES
Model
55Ah-12V
80Ah-12V
100Ah-12V
145Ah-12V
200Ah-12V
260Ah-12V
Part No.
68280 T
68281 V
68282 X
68283 Z
68284 B
68285 D
Nominal voltage
12 V
12 V
12 V
12 V
12 V
12 V
Nominal capacity 20h
55 Ah
80 Ah
100 Ah
145 Ah
200 Ah
260 Ah
229 x 138 x 235
350 x 167 x 180
328 x 172 x 222
340 x 173 x 285
522 x 240 x 219
520 x 268 x 220
(9.0 x 5.4 x 9.2)
(13.8 x 6.6 x 7.1)
(12.9 x 6.8 x 8.7)
18 (39.7)
24 (52.9)
30 (66.1)
Dimensions mm (“)
Weight kg (lbs)
(13.4 x 6.8 x 11.2) (20.5 x 9.4 x 8.6)
44 (97)
60 (132.3)
(20.5 x 10.5 x 8.7)
4.1
BATTERIES
AGM & GEL
BATTERIES
■ Features: Maintenance-free, sealed batteries, suitable for use as start
and service batteries. Supplied with a M6 bolt connection. Detachable battery pole optional.
The Ah capacity is based on a 20-hour discharge rate (C20). Cycle life > 400 full charge / discharge cycles.
■ Applications: These deep cycle batteries must be charged with a multi-stage battery charger, combi or DC generator
with temperature sensor.
■ Warranty: 2 years
74 (163.1)
12 V - GEL BATTERIES
■ Features: Maintenance-free, sealed batteries, suitable for use as start and service batteries. Supplied with a M6 bolt
connection. Detachable battery pole optional. The Ah capacity is based on a 20-hour discharge rate (C20). Cycle life >
600 full charge / discharge cycles.
■ Applications: These deep cycle batteries must be charged with a multi-stage battery charger, combi or DC generator
with temperature sensor.
■ Warranty: 2 years
Model
100Ah-12V
145Ah-12V
180Ah-12V
225Ah-12V
Part No.
68286 F
68287 H
68288 K
68289 M
12 V
12 V
12 V
12 V
100 Ah
145 Ah
180 Ah
225 Ah
328x172x222 (12.9x6.8x8.7)
340x173x280 (13.4x6.8x11.0)
30 (66.1)
44 (97)
Nominal voltage
Nominal capacity 20h
Dimensions mm (“)
Weight kg (lbs)
530x209x214 (20.9x8.2x8.4)
522x240x210 (20.5x9.4x8.3)
53 (116.8)
65 (143.3)
DETACHABLE OPTIONAL POLE FOR BATTERY
68657R - Suited for WhisperPower® AGM and GEL batteries, supplied with M6 bolt
2V OPZV – GEL BATTERIES
■ Features: 2 Volt GEL traction batteries designed fora n extended number of charge / discharge
cycles. Designed to operate with high current AC and DC loads. For horizontal and vertical
installation. Supplied with connection calbles for the 2 Volt cells. Capacity at C10 rating.
■ Applications: Designed for regular and deep discharging. Cycle life > 1200 cycles. Recommended
for use with high power converters (>5kVA).
■ Warranty: 2 years
OPzV 2 VOLT
BATTERIES
Model
750Ah-2V
1000Ah-2V
1250Ah-2V
1500Ah-2V
1650Ah-2V
Part No.
68291 Y
68292 A
68293 C
68290 W
68294 E
2V
2V
2V
Nominal voltage
Nominal capacity 10h
Dimensions mm (“)
Weight kg (lbs)
2V
2V
750 Ah
1000 Ah
1250 Ah
1500 Ah
1650 Ah
206 x 145 x 667
210 x 191 x 668
210 x 233 x 647
210 x 275 x 669
210 x 275 x 820
(8.1 x 5.7 x 26.3)
(8.3 x 7.5 x 26.3)
(8.3 x 10.8 x 26.3)
(8.3 x 10.8 x 26.3)
(8.3 x 10.8 x 32.3)
50 (110.2)
68 (149.9)
82 (180.8)
97 (213.8)
120 (264.5)
INDEX
UF
LE
X
WHISPER POWER® - BATTERIES
LI-ION
BATTERIES
BATTERIES
4.2
LI-ION BATTERIES
■ Features: LiFePo4 technology (Lithium non iron phosphate). The built-in BMS Battery Management System ensure
that the individual cells will be charged and discharged (balancing) and ensure battery life if used with proper
charging system and a charging/discharging protection. Li-ion batteries are appr. 3 times more compact and appr. 3
times lighter than lead acid batteries. Can be charged with 1/C (i.e. 12V-100Ah Li-ion battery can be charged and
discharged with 100A).
■ Applications: Extended lifetime with a cycle life > 5000 cycles, depending on ambient temperature, depth of
discharge and charge intensity.
■ Warranty: 2 years
LI-ION 12V
160Ah-12V
200Ah-12V
400Ah-12V
68658 T
68659 V
68660 D
12 V
12 V
12 V
160 Ah
200 Ah
400 Ah
214 x 316 x 377 (8.4 x 12.4 x 14.8)
367 x 278 x 349 (14.4 x 10.9 x 13.7)
468 x 316 x 378 (18.4 x 12.4 x 14.9)
22,4 (49.4)
29 (63.9)
54 (119)
Part No.
Nominal voltage
Nominal capacity 1/C
Dimensions mm (“)
Weight kg (lbs)
LI-ION 24V
160Ah-24V
200Ah-24V
400Ah-24V
700Ah-24V
1000Ah-24V
Part No.
68661 F
68662 H
68663 K
68664 M
68666 S
Nominal voltage
25,6 V
25,6 V
25,6 V
25,6 V
25,6 V
Nominal capacity 1/C
160 Ah
200 Ah
400 Ah
700 Ah
1000 Ah
214 x 316 x 377
367 x 278 x 349
468 x 316 x 378
634 x 324 x 399
857 x 340 x 468
(8.4 x 12.4 x 14.8)
(14.4 x 10.9 x 13.7)
(18.4 x 12.4 x 14.9)
(24.9 x 12.7 x 15.7)
(33.7 x 13.4 x 18.4)
44,8 (98.8)
58,4 (128.7)
108 (238.1)
168 (370.4)
264 (582)
200Ah-48V
400Ah-48V
700Ah-48V
1000Ah-48V
1000Ah-48V
68668 W
68669 Y
68670 G
68671 J
68672 L
Nominal voltage
51,2 V
51,2 V
51,2 V
51,2 V
51,2 V
Nominal capacity 10h
200 Ah
400 Ah
700 Ah
1000 Ah
1000 Ah
367 x 278 x 349
468 x 316 x 378
634 x 324 x 399
857 x 340 x 468
567 x 576 x 453
Dimensions mm (“)
Weight kg (lbs)
LI-ION 48V
Part No.
Dimensions mm (“)
Weight kg (lbs)
(14.4 x 10.9 x 13.7) (18.4 x 12.4 x 14.9)
116,8 (257.5)
216 (476.2)
(24.9 x 12.7 x 15.7) (33.7 x 13.4 x 18.4)
336 (740.7)
LI-ION BATTERIES: Bi-stable relay for tripping on voltage / deep discharge:
68673 N - 12 V; 68674 R - 24 V; 68675 T - 48 V
INDEX
528 (1164)
(22.3 x 22.7 x 17.8)
560 (1234.6)
UF
LE
X
VICTRON ENERGY® - BATTERIES
GEL
Deep cycle AGM batteries are more suitable for short-time delivery of very high currents (engine starting) than gel
batteries. Life: 7 – 10 years
AGM Type
PART No.
CAPACITY*
DIMENSIONS
H x W x D mm (“)
WEIGHT
kg (lbs)
12/60
65022 C
60 - 55 Ah
299x138x227 (11.7x5.4x8.9)
20 (44.0)
12/66
65023 E
66 - 60 Ah
258x166x235 (10.1x6.5x9.2)
24 (52.9)
12/90
65024 G
90 - 80 Ah
350x167x183 (13.8x6.6x7.2)
27 (59.5)
12/110
65645 S
110 - 100 Ah
330x171x220 (13x6.7x8.7)
32 (70.5)
12/130
65025 J
130 - 120 Ah
410x176x227 (16.1x6.9x8.9)
38 (83.7)
12/165
65026 L
165 - 150 Ah
485x172x240 (19.1x6.7x9.4)
47 (103.6)
12/220
65027 N
220 - 200 Ah
522x238x240 (20.5x9.3x9.4)
65 (143.0)
PART No.
CAPACITY*
DIMENSIONS
H x W x D mm (“)
WEIGHT
kg (lbs)
12/60
65028 R
60 - 55 Ah
299x138x227 (11.7x5.4x8.9)
20 (44.0)
12/66
65029 T
66 - 60 Ah
258x166x235 (10.1x6.5x9.2)
24 (52.9)
12/90
65030 B
90 - 80 Ah
350x167x183 (13.8x6.6x7.2)
26 (57.3)
12/110
65646 U
110 - 100 Ah
330x171x220 (13x6.7x8.7)
33 (72.7)
12/130
65031 D
130 - 120 Ah
410x176x227 (16.1x6.9x8.9)
38 (83.7)
12/165
65032 F
165 - 150 Ah
485x172x240 (19.1x6.7x9.4)
48 (103.6)
12/220
65033 H
220 - 200 Ah
522x238x240 (20.5x9.3x9.4)
66 (143.0)
BATTERIES
4.3
AGM
*value for 20 hours of discharging
GEL deep cycle batteries. Life: 12 years
GEL Type
*value for 20 hours of discharging
GEL long life 2Vcc batteries with lead calcium grids. Life: 20 years.
GEL 2 V DC Type
PART No.
CAPACITY*
DIMENSIONS
H x W x D mm (“)
WEIGHT
kg (lbs)
2/800
65034 K
800 Ah
215x193x710 (8.5x7.6x27.9)
68 (150)
2/1000
65035 M
1000 Ah
215x235x710 (8.5x9.2x27.9)
82 (181)
2/1500
65036 P
1500 Ah
215x277x855 (8.5x10.9x33.6)
120 (264)
2/2000
65037 S
2000 Ah
215x400x815 (8.5x15.7x32.1)
160 (352)
2/3000
65038 U
3000 Ah
215x580x815 (8.5x22.8x32.1)
240 (529)
*value for 10 hours of discharging
Lithium batteries available on request
INDEX
UF
LE
X
VICTRON ENERGY®
Lithium-ION batteries 12,8 Volt
Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage cell is 3,2V
(lead-acid: 2V/cell). A 12,8V Li-ion battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells
connected in series.
BATTERIES
4.4
■ Efficient . In several applications (especially off-grid solar and/or
wind), energy efficiency can be of crucial importance. The round
trip energy efficiency (discharge from 100% to 0% and back to
100% charged) of the average lead-acid battery is 80%. The round
trip energy efficiency of a Li-ion battery is 92%
■ Weight reduction of the battery pack (with equal energy used) up
to 70% referred to lead type.
■ Lithium-ion batteries are more expensive when compared to leadacid. But in demanding applications, the high initial cost will be
more than compensated by longer service life, superior reliability
and excellent efficiency
MODEL
PART No.
LFP-CB
12,8/60
LFP-CB
12,8/90
LFP-CB
12,8/160
LFP-CB
12,8/200
68890 X
68891 Z
LFP
NOMINAL
CYCLE
MAX PULSE
MAX
DIMENSIONS
WEIGHT
CAPACITY
@ 25°C
LIFE
CURRENT(1)
CHARGE
H x L x P mm (“)
kg (lbs)
(70%DoD)
(10s)
CURRENT
60 Ah
3000
600 A
60 A
235x293x139
12
(9.2x11.5x5.5)
(26.4)
249x293x168
16
(9.8x11.5x6.6)
(35.3)
320x338x233
33
(12.6x13.3x9.1)
(72.7)
90 Ah
3000
900 A
90 A
68761 K
160 Ah
3000
1200 A
160 A
68762 M
200 Ah
3000
1500 A
200 A
295x425x274
42
(11.6x16.7x10.8)
(92.6)
235x293x139
12
(9.2x11.5x5.5)
(26.4)
249x293x168
16
(9.8x11.5x6.6)
(35.3)
320x338x233
33
(12.6x13.3x9.1)
(72.7)
295x425x274
42
(11.6x16.7x10.8)
(92.6)
BMS: with interface for Battery Management System
LFP-BMS
12,8/60
LFP- BMS
12,8/90
LFP- BMS
12,8/160
LFP-BMS
12,8/200
68763 P
60 Ah
3000
600 A
180 A
68764 S
90 Ah
3000
900 A
270 A
68765 U
160 Ah
3000
1200 A
400 A
68766 W
200 Ah
3000
1500 A
500 A
CABLES WITH M8 CIRCULAR CONNECTOR FOR Li-ion BATTERIES:
Male to female 3 pole 1 m (3.3 ft) – 68886 G
Male to female 3 pole 2 m (6.6 ft) – 68887 J
Male to female 3 pole 3 m (9.8 ft) – 68888 L
Male to female 3 pole 4 m (13.1 ft) – 68889 N
INDEX
UF
LE
X
Why a Battery Management System (BMS) is needed:
■ A LFP cell will be damaged if the voltage over the cell falls to less
than 2,5V.
■ A LFP cell will be damaged if the voltage over the cell increases to
more than 4,2V. Lead-acid batteries will eventually also be
damaged when discharged too deeply or overcharged, but not
immediately. A lead-acid battery will recover from total discharge
even after it has been left in discharged state during days or weeks
(depending on battery type and brand).
BMS 12/200 - 69015 C
■ The cells of a LFP battery do not auto-balance at the end of the
charge cycle.
The cells in a battery are not 100% identical. Therefore, when cycled, some cells will be fully charged or discharged
earlier than others. The differences will increase if the cells are not balanced/equalized from time to time.
The differences between cells may become some so extreme over time that, even though the overall battery voltage
is within limits, some cells will be destroyed due to over- or under-voltage.
A LFP battery therefore must be protected by a BMS that actively balances the individual cells and prevents underand over-voltage.
A 12V BMS that protects the alternator (and wiring), and supplies up to 200A in any DC load (including
inverters and inverter/chargers)
Alternator/battery charger input (Power Port AB)
■ The first function of Power Port AB is to prevent the load connected to the LFP battery from discharging the starter
battery. This function is similar to that of a Cyrix battery combiner or Argo FET battery isolator. Current can flow to
the LFP battery only if the input voltage (= voltage on the starter battery) exceeds 13V.
■ Current cannot flow back from the LFP battery to the starter battery, thus preventing eventual damage to the LFP
battery due to excessive discharge.
■ Excessive input voltage and transients are regulated down to a safe level.
■ Charge current is reduced to a safe level in case of cell unbalance or over temperature.
■ The input current is electronically limited to approximately 80% of the AB fuse rating. A 50A fuse, for example, will
therefore limit the input current to 40A.
Choosing the right fuse will therefore:
a. Protect the LFP battery against excessive charge current (important in case of a low capacity LFP battery).
b. Protect the alternator against overload in case of a high capacity LFP battery bank (most 12V alternators will
overheat and fail if running at maximum output during more than 15 minutes).
c. Limit charge current in order not to exceed the current handling capability of the wiring.
The maximum fuse rating is 100A (limiting charge current to approximately 80A).
Load/battery charger output/input (Power Port LB)
■ Maximum current in
both directions: 200A
continuous.
■ Peak discharge
current electronically
limited to 400A.
■ Battery discharge cutoff whenever the
weakest cell falls
below 3V.
■ Charge current is
reduced to a safe
level in case of cell
unbalance or over
temperature.
Up to ten 12,8V LFP batteries
can be connected in parallel
4.5
BATTERY MANAGEMENT SYSTEM
VICTRON ENERGY®
BMS 12/200 FOR LITHIUM BATTERIES
Isolated Orion DC-DC converter
needed for DC loads with minus
connected to chassis
INDEX
UF
LE
X
VE. Bus BMS AND BATTERY BALANCER
4.6
VICTRON ENERGY® - VE.BUS BMS
Protects each individual cell of a Victron lithium
iron phosphate (LiFePO4 or LFP) battery
The BMS will:
■ shut down or disconnect loads in case of imminent
cell under voltage,
■ reduce charge current in case of imminent cell
overvoltage or over temperature (VE.Bus products
only),
■ shut down or disconnect battery chargers in case of
imminent cell overvoltage or over temperature..
VE.BUS BMS
Protects 12 V, 24 V and 48 V systems
Operating voltage range of the BMS: 9 to 70 V DC.
Communicates with all VE.Bus products
The VE.Bus BMS connects to a MultiPlus, Quattro or
Phoenix inverter with a standard RJ45 UTP cable.
■ Protection grade: IP20
■ Standards: EN60950; EN61000-6-3; EN55014-1 ;
EN61000-6-2 ; EN61000-6-1; EN 55014-2 and EN 50498
MODEL
VE.BUS BMS
Part No.
69016 E
Input Voltage Range
9-70 Vdc
Current Draw, Normal Operation
10 Ma
Current Draw, Low Cell Voltage
2 Ma
Operating Temperature
Weight kg (lbs)
0,1 (0.22)
Dimensions (“)
105x78x32 (4.1x3.1x1.3)
BATTERY BALANCER
The Battery Balancer equalizes the state of charge of
two series connected 12 V batteries, or of several
parallel strings of series connected batteries.
When the charge voltage of a 24 V battery system
increases to more than 27 V, the Battery Balancer will
turn on and compare the voltage over the two series
connected batteries. The Battery Balancer will draw a
current of up to 1 A from the battery (or parallel
connected batteries) with the highest voltage. The
resulting charge current differential will ensure that all
batteries will converge to the same state of charge.
If needed, several balancers can be paralleled.
A 48 V battery bank can be balanced with three Battery
Balancers.bilanciato con tre Equalizzatori.
IP20 protection
-20 A +50°c
MODEL
BATTERY
BALANCER
Part No.
69369 R
Input voltage range
Up to 18V per
battery, 36 V total
Turn on level
27,3 V +/- 1%
Turn off level
26,6 V +/- 1%
Stand-by current draw
0,7 mA
Midpoint deviation to start balancing
50 mV
Max. balancing current
0,7 A (when
deviation > 100mV)
Alarm trigger level
210 mV
Alarm reset level
140 mV
Alarm relay
Alarm relay reset
60 V / 1A
Two terminals to
connect a push button
Over temperature protection
Operating temperature
Dimensions mm (“)
Yes
-30°C to +50°C
100x113x47
(3.94x4.45x1.85)
Weight kg (lbs)
Series connection
INDEX
Parallel connection
0,4 (0.88)
UF
LE
X
ENERPOWER® - BATTERIES
4.7
SLC™ SERIES - 12 V AGM TECHNOLOGY
BATTERIES
■ Applications: SLC series batteries are suitable for use in solar power
stations, control devices, alarm systems, emergency systems,
emergency responders, telecommunications, UPS, operating rooms,
video surveillance
■ Features: AGM technology. They work in a wide range of
temperatures, they are sealed and require no maintenance. They
have a great conduct to lens discharge
■ Life: 5 ÷ 6 years ≤ 18 Ah, 10 years > 18 Ah.
AGM
SLC™ SERIES
Part No.
Nominal voltage
Nominal capacity 20h
Dimensioni LL xx PP xx H
Dimensions
H mm
mm (“)
(“)
Weight kg (lbs)
SLC100-12A
SLC150-12A
SLC200-12A
SLC250-12A
66606 L
66856 L
66855 J
68649 S
12 V
12 V
12 V
12 V
100 Ah
150 Ah
200 Ah
250 Ah
328 x 172 x 214
483 x 170 x 241
522 x 240 x 219
520 x 268 x 220
(12.9 x 6.8 x 8.5)
(19.0 x 6.7 x 9.5)
(20.5 x 9.4 x 8.6)
(20.4 x 10.6 x 8.7)
28,5 (62.9)
45,0 (99.2)
62,0 (136.7)
68,5 (151.0)
DC™ SERIES -12 V AGM TECHNOLOGY DEEP CYCLE
■ Applications: solar equipment, boats, campers, aerial work
platforms, power stations, monitoring equipment, emergency
systems, emergency responders, telecommunications, UPS, operating
rooms
■ Features: AGM technology. They work in a wide temperature range,
are sealed and require no maintenance. Excellent behavior to
charging cycles
■ Life: 1400 discharge cycles, DOD 30%
DC™ SERIES
DC™ SERIES
DC 70-12
DC 105-12
DC 145-12
DC 215-12
Part No.
68650 A
68651 C
68652 E
68653 G
Nominal voltage
12 V
12 V
12 V
12 V
Nominal capacity 20h
70 Ah
105 Ah
145 Ah
215 Ah
260 x 169 x 215
307 x 169 x 215
341 x 173 x 287
381 x 178 x 371
(10.3 x 6.7 x 8.5)
(12.1 x 6.7 x 8.5)
(13.5 x 6.8 x 11.3)
(15.0 x 7.0 x 14.6)
23,8 (52.2)
30,2 (66.6)
44,3 (97.7)
60 (132.3)
Dimensioni LL xx PP xx H
Dimensions
H mm
mm (“)
Weight kg (lbs)
INDEX
UF
LE
X
BATTERY BOXES
4.8
UFLEX® - BATTERY METAL CONTAINERS
UFLEX battery box contains 2 batteries and is available in two
different sizes.
They are equipped with a front panel that can be opened by a
safety lock screw.
They are made of electrostatic painted iron plate 15/10 (RAL
7035B).
Electrical wiring (with connections both in series and in parallel)
is available on demand.
They can be placed side by side or superimposed, depending on
the available space.
4 screws and 4 nuts mounting kit permits to couple 2 boxes.
MOUNTING KIT for 2 boxes - 69958 L
Model
Box for No. 2 x 100Ah batteries
Part No.
69181 W
External dimensions mm (“)
Battery capacity
Maximum batteries size
Weight kg (lbs)
INDEX
Box for No. 2 x 200/260Ah batteries
69182 Y
400 x 400 x 350 (15.7 x 15.7 x 13.8)
600 x 600 x 350 (23.6 x 23.6 x 13.8)
2 x 100/110 Ah
2 x 200/260 Ah
330 x 175 x 220 mm (13.0 x 6.9 x 8.7”)
525 x 270 x 220 mm (22.6 x 10.6 x 8.7”)
10 (22)
18,5 (40.8)
UF
LE
X
PRIMUS® - WIND GENERATORS
AIR BREEZE/AIRX MARINE WIND GENERATORS
Quiet, reliable energy for sea and shore
AirBreeze/Airx Marine is trusted by sailors around the world and
recommended as the best high-energy output turbine by Yachting
Monthly. Its optimized electronic controls deliver energy quietly and
efficiently. Extensive third party testing and certification shows more
consistent output than the competition. AirBreeze/Airx Marine is part of
the latest generation of AIR products – the world’s best-selling wind
turbines – with more than 135,000 units sold in more than 120 countries.
WIND GENERATORS
5.1
High performance in marine environments
We recommend AirBreeze for all small battery-charging applications in
coastal areas or offshore: boats, docks and other marine uses. The
AirBreeze is an ideal wind turbine for hybrid systems with solar to offset
those cloudy or stormy periods. AirBreeze is built and backed by the
worldwide leader in small wind.
■
■
■
■
■
■
■
■
■
Improved reliability backed by a lifetime warranty
Quiet operation
Energy in light winds
Lightweight; unique design is simple and easy to install
Stop switch included
Corrosion resistant paint tested to SAE J2334 standard
Marine grade 0-ring seal
Stainless steel external fasteners
Anodized blade hub
Monthly Wind Energy
Monthly Energy
Output (kWh)
50
40
30
20
10
0
m/s
0
mph
4
2
6
3
4 5 6 7
8 9 10
8 10 12 14 16 18 20 22
Average Annual Wind Speed
AIR BREEZE
Part No.
Energy
Air Breeze M1 12V
Air Breeze M2 24V
AirX Marine 12V
AirX Marine 24V
68070 F
68071 H
63034 Z
63035 B
app. 3200 Ah/month at 5,8 m/s (11.3 knots)
30kW h/m at 5,8 m/s (13 mph)
Rotor Diameter
1.17 m (6 in)
Weight
5.9 kg (13 lb)
Shipping dimensions
686 x 318 x 229 mm (27 x 12.5 x 9 in)
Mount
Startup Wind Speed
Voltage
Turbine Controller
Overspeed protection
Survival Wind Speed
48 mm (1.9 in) outer diameter
3.13 m/s (7 mph)
3.58 m/s (8 mph)
12 or 24 V DC
Microprocessor-based smart internal regulator
Electronic torque control
49.2 m/s (110 mph)
INDEX
UF
LE
X
PRIMUS® - WIND GENERATORS
AIR 30 AND AIR 40 WIND GENERATORS
■ Features:
- These wind generators are controlled by a microprocessor and
provide high-performance and electronic protection against strong
winds without mechanical friction.
WIND GENERATORS
5.2
- Its design and the carbon alloy blades ensure quiet operation,
durability and high efficiency in several wind conditions. Their
performances depends on wind speed, pole height and environment
condition.
- Generator body made of die cast aluminum alloy; brushless
alternator with permanent magnets.
- AIR 30 and AIR 40 are easy to install; with integrated electronic
control, they are plug-and-play.
- In hybrid systems with PV panels, they provide energy all year
long.
- Available on request 48V model
■ Applications:
AIR 30 and AIR 40 wind generators are particularly suited to
provide energy in off-grid applications such as telecom, water
pumping, lighting, SCADA, off-grid houses, security systems, battery
chargers when the energy demand is low.
Model
Part No.
Energy at 5,8 m/s (13 mph)
Voltage
Start-up wind
Wind speed operating
range
Optimum wind speed range
Survival wind speed
Rotor diameter
Swept area
Pipe outer
diameter
Dimensions
Weight
INDEX
AIR 30
AIR 40
68072 K (12 V) - 68073 M (24 V) 68074 P (12 V) - 68075 S (24 V)
30 kWh/month
40 kWh/month
12/24 V DC
12/24 V DC
3,58 m/s (8 mph)
3,1 m/s (7 mph)
3,6-22 m/s (8-49 mph)
3,1-22 m/s (7-49 mph)
11-15 m/s (25-32 mph)
4,5-22 m/s (10-49 mph)
49,2 m/s (110 mph)
49,2 m/s (110 mph)
1,17 m (46 in)
1,17 m (46 in)
1,07 m² (11,5 ft²)
1,07 m² (11,5 ft²)
48 mm (1,9 in)
48 mm (1,9 in)
686 x 318 x 229 mm
(27 x 12,5 x 9 in)
686 x 318 x 229 mm
(27 x 12,5 x 9 in)
5,9 kg (13 lb)
5,9 kg (13 lb)
UF
LE
X
SILENTWIND® - WIND GENERATORS
SILENTIWIND 400 – THREE BLADE GENERATORS
■ Features:
- Generator type: permanent magnet generator, 3 phase
- Integrated electronic/manual stop switch
- Very light: 6,8 kg only
- Hand laminated, UV-resistant carbon blades, successfully tested
according to DIN EN 61400-2 at hurricane speed 122km/h.
- Low noise
- Supplied with external hybrid controller for wind and solar energy
with multi-function LCD display (for 12V and 24V models).
It can be connected to photovoltaic modules.
■ Applications: universal application for marine, land and professional
systems with low, middle and high wind
■ Warranty: 3 years
■ Certification: DIN VDE protection class II; CE; RohS
Model
SLW-420-12
SLW-450-24
SLW-500-48
Part No.
68482 F
68483 H
68484 K
Rated voltage
12 VDC
24 VDC
48 VDC
Rated power
420 W
450 W
500 W
Rated wind speed
14,5 m/s
14,5 m/s
14,5 m/s
Start-up wind speed
2,2 m/s
2,2 m/s
2,2 m/s
Start-up charging
2,8 m/s
2,8 m/s
2,8 m/s
Rotor diameter
1,15 m
1,15 m
1,15 m
550-1700 rpm
550-1700 rpm
550-1700 rpm
Rotor speed range
Packing dimensions mm (“)
Dry weight kg (lbs)
5.3
WIND GENERATORS
- Very good start-up performance due to low cogging torque at
2,2 m/s wind speed
780 x 400 x 210 780 x 400 x 210 780 x 400 x 210
(30.7 x 15.8 x 8.3) (30.7 x 15.8 x 8.3) (30.7 x 15.8 x 8.3)
6,8 (15)
6,8 (15)
6,8 (15)
WIND/SOLAR HYBRID CHARGE REGULATOR
(for 12V and 24V models)
The LCD multifunction display shows all main operating values (W, A,
V/Ah, kWh, Ah).
Battery system voltage automatically detected. Maximum power input
of the solar panel: 550 Wp.
Part No.
68687 A (12 V) - 68688 C (24 V) - 69880 Z (48 V)
Rated battery voltage
12 or 24 VDC
Max wind gen. power input
600 W / 40 A
Max solar mod. power input
550 Wp / 40 A / 50 VOC
Display data
V, A, V/Ah, kWh, Ah
Dimensions mm (“)
270 x 130 x 80 (10.6 x 5.1 x 3.1)
Dry weight kg (lbs)
1,7 (3.3)
48 V Controller to be ordered separately - 69880 Z
THREE BLADE SPARE KIT
68485 M - Three blade kit for AirBreeze™ and AirX™
POLE AND MOUNTING KIT
68689 E - Reinforced pole for high wind speed
68690 N - Mounting kit
INDEX
UF
LE
X
SUPERWIND® - WIND GENERATOR
SILENTIWIND 350 – THREE BLADE GENERATOR
The Superwind 350 is a small wind turbine for professional use, which
even under extreme conditions works autonomously and automaticly.
■ Features:
- Adjust the speed and power by varying the pitch of the blades
- Alternator with permanent magnet, three-phase rectifier
- Stop: Short circuit of the generator
- Superwind 350 is often used in mixed wind / photovoltaic systems
■ Applications:
Ideal fields of application for example are navigational aids, traffic
control systems, environmental monitoring stations or transmitters,
but also sailing yachts, campers, summer cottages and mountain
shelters.
SUPERWIND
Superwind 350 12V
Superwind 350 24V
65726 S
65727 U
350 W
350 W
Voltage
12 V DC
24 V DC
Cut-in wind speed
3,5 m/s
3,5 m/s
Cut-off wind speed
none
none
Rotor diameter
1,20 m
1,20 m
500-1300 rpm
500-1300 rpm
70 N
70 N
220 N
220 N
11,5 (25.3)
11,5 (25.3)
Part No.
Max power
at 12,5 m/s
Rotor speed
Power Curve
Rotor thrust
(operation)
Rotor thrust
(extreme wind speed)
Dry weight kg (lbs)
ACCESSORIES
Power output (W)
WIND GENERATORS
5.4
- Carbon fiber reinforced blades
CRM 12V Charge controller - 65728 W
CRM 24V Charge controller - 65729 Y
Stop switch - 65730 G
Installation Kit - 65731 J
INDEX
wind speed (m/s)
LE-600™ WIND TURBINE
■ Features:
- 3 phase brushless wind turbine. The cross-ventilated ‘savonious’
horizontal axis rotor delivers power outputs of up to 750 watts in
absolute silence.
- Quiet; reliable.
- Compact and lightweight, can be installed in a variety of positions
with ease.
- Marine quality finish, high quality components and lasting
performance
- Whispower™ blades.
- High efficiency
- Charge controller included
- 100 W Dump load and stop switch included
■ Applications:
Trickle charging for batteries installed on boats and land.
Polar stations for monitoring air pollution.
Buoys and marine lights. Telecom systems.
Signaling systems that require low energy.
■ Warranty: 2 years
Model
Part No.
Voltage
Nominal power
@ 8 m/s (15,5 knots)
Peak power
Cut -in wind speed
Rotor diameter
Rotor speed
Dry weight kg (lbs)
LE-600
69761 R (12 V) - 69762 T (24 V)
12 or 24 V DC / 48
160 W
UF
LE
X
5.5
WIND GENERATORS
LEADING EDGE® - WIND TURBINES
750 W
3 m/s (6.7 mph)
1,54 m
550-1700 rpm
19.5 (43)
INDEX
UF
LE
X
WIND GENERATORS
5.6
LEADING EDGE® - WIND TURBINES
LE-v150™ WIND TURBINE
■ Features:
- 3 phase brushless wind turbine. The cross-ventilated ‘savonious’
vertical axis rotor coupled with the well proven axial flux alternator
deliver power outputs of up to 200 watts in absolute silence.
- Quiet; reliable.
- Robust design, almost indestructable: this vertical axis wind
turbine is designed & proven to survive 120mph Antarctic winds.
- Compact and lightweight, can be installed in a variety of positions
with ease
- Marine quality finish, high quality components and lasting
performance
- High efficiency due to anticipated start-up charge
- Charge controller included
■ Applications:
Trickle charging for batteries installed on boats and land.
Polar stations for monitoring air pollution.
Buoys and marine lights. Telecom systems.
Signaling systems that require low energy.
■ Warranty: 2 years
Model
LE-v150
Part No.
69771 U (12 V) - 69772 W (24 V)
Voltage
12 or 24 V DC / 48
Nominal power
@ 8 m/s (17,8 knots)
Peak power
Cut -in wind speed
Rotor diameter
Dry weight kg (lbs)
INDEX
24 W
200 W
3 m/s (9 mph)
270 mm (10.6”)
13 (28.7)
LEADING EDGE® - WIND TURBINES
LE-v50™ WIND TURBINA
■ Features:
- 3 phase brushless wind turbine. The cross-ventilated ‘savonious’
vertical axis rotor coupled with the well proven axial flux alternator
deliver power outputs of up to 70 watts in absolute silence
UF
LE
X
- Quiet: the LE-v50 can self-regulate without the need for external
charge controllers ; reliable
- Compact and lightweight, can be installed in a variety of positions
with ease
- Marine quality finish, high quality components and lasting
performance
- PHigh efficiency due to anticipated start-up charge
■ Applications:
Trickle charging for batteries installed on boats and land.
Polar stations for monitoring air pollution.
Buoys and marine lights.
Signaling systems that require low energy.
■ Warranty: 2 years
Model
LE-v50
Part No.
68641 Z (12 V) - 68642 B (24 V)
Voltage
12 or 24 V DC
Nominal power
@ 8 m/s (15,5 knots)
Peak power
Cut -in wind speed
11 W
70 W
4 m/s (7,7 knots)
Rotor diameter
200 mm (7.9”)
Rotor speed
550-1700 rpm
Dry weight kg (lbs)
5.7
WIND GENERATORS
- Robust design, almost indestructable: this vertical axis wind
turbine is designed & proven to survive 120mph Antarctic winds
9 (19.9)
INDEX
UF
LE
X
HYE® - WIND GENERATORS
5 BLADE WIND GENERATORS HY-400L; HY-600L
■ Features:
- Equipped with electromagnetic control of the blade speed and
with aerodynamic clutch of the blades. The blades are made of glass
fiber reinforced
- 3 phase brushless wind generator with permanent magnets. The
wind generator body is made of aluminium alloy and rotor is
stainless steel
- Pole connection through a flange or a clamp and bolt
WIND GENERATORS
5.8
- PWM electrical signal or low voltage charge function
- Available hybrid solar-wind controller, supplied with pure sine
wave inverter for HY-400L (12V DC) and HY-600L (24V DC) wind
generators
■ Applications: Stand-alone systems, solar-wind hybrid systems, etc
■ Warranty: 3 years
■ Certifications: ISO9001:2008; CE; RoHS; ETL
Model
HY-400L
HY-600L
Part No.
68511 K
68643 D
Nominal power
400 W
600 W
Peak power
500 W
750 W
12/24 V DC
24/48 V DC
2 m/s (4.5 mph)
2 m/s (4.5 mph)
Cut-in wind speed
2,5 m/s (5.6 mph)
2,5 m/s (5.6 mph)
Nominal wind speed
12 m/s (26.8 mph)
12 m/s (26.8 mph)
Max wind speed
50 m/s (110 mph)
50 m/s (110 mph)
750 rpm
750 rpm
33.3/16.7 A
25/12,5 A
<20 dB @ 5 m/s
<20 dB @ 5 m/s
82 kWh/month
91 kWh/month
-40°C to +60 °C
-40°C to +60 °C
1,55 m (5.1’)
1,75 m (5.7’)
Area swept
1,89 m²
2,4 m²
Dry weight kg (lbs)
22 (48.5)
25 (55.1)
Voltage
Start-up wind speed
Nominal rotor speed
Nominal charge current
Noisiness
Energy delivered (average
month wind speed 5,5 m/s)
Temperature compensation
Rotor diameter
HYBRID CHARGE CONTROLLERS FOR HY-400L E HY-600L GENERATORS
Model
HY-WSC04-12AWM
HY-WSC04-24AWM
HY-WSC06-24AWM
HY-WSC06-48AWM
Part No.
68512 M
68795 D
68644 F
68798 K
Nominal energy
500 VA
500 VA
600 VA
600 VA
Nominal power
500 W
1000 W
600 W
1000 W
PV nominal power
150 W
300 W
150 W
300 W
Voltage
12 VDC
24 VDC
24 VDC
48 VDC
Pure sine-wave
Pure sine-wave
Pure sine-wave
Pure sine-wave
AC inverter voltage
220 VAC
220 VAC
220 VAC
220 VAC
Dimensions mm (“)
180 x 155 x 100
180 x 155 x 100
180 x 155 x 100
180 x 155 x 100
(7.1 x 6.1 x 3.9)
(7.1 x 6.1 x 3.9)
(7.1 x 6.1 x 3.9)
(7.1 x 6.1 x 3.9)
Dry weight kg (lbs)
1,7 (3.8)
2 (4.4)
1,7 (3.8)
2 (4.4)
Inverter output wave
INDEX
UF
LE
X
HYE® - WIND GENERATORS
5 BLADE WIND GENERATORS HY-1000L; HY-3000L
■ Features:
- Equipped with electromagnetic control of the blade speed and
with aerodynamic clutch of the blades. The blades are made of glass
fiber reinforced
- 3 phase brushless wind generator with permanent magnets. The
wind generator body is made of aluminium alloy and rotor is
stainless steel
- Pole connection through a flange or a clamp and bolt
5.9
- PWM electric signal or low voltage charge function
WIND GENERATORS
- Available hybrid solar-wind controller, supplied with pure sine
wave inverter for HY-1000L (24V DC or 48V DC) wind generators
■ Applications: Stand-alone systems, solar-wind hybrid systems, etc
■ Warranty: 3 years
■ Certifications: ISO9001:2008; CE; RoHS; ETL
Model
HY-1000L
HY-3000L
Part No.
68646 K
68647 M
Nominal power
1000 W
3000 W
Peak power
1200 W
3500 W
24/48 V DC
48 V DC
2 m/s (4.5 mph)
2,5 m/s (5,6 mph)
Cut-in wind speed
3,0 m/s (6,7 mph)
3,0 m/s (6,7 mph)
Nominal wind speed
12 m/s (26.8 mph)
12 m/s (26.8 mph)
Max wind speed
50 m/s (110 mph)
60 m/s (133 mph)
750 rpm
700 rpm
Nominal charge current
<20 dB @ 5 m/s
<30 dB @ 5 m/s
Noisiness
<20 dB @ 5 m/s
<20 dB @ 5 m/s
175 kWh/month
495 kWh/month
-40°C to +60 °C
-40°C to +60 °C
1,96 m (6.4’)
3,05 m (10.0’)
3,0 m²
7,3 m²
28 (61.7)
70 (154.3)
Voltage
Start-up wind speed
Nominal rotor speed
Energy delivered (average
month wind speed 5,5 m/s)
Temperature compensation
Rotor diameter
Area swept
Dry weight kg (lbs)
HYBRID CHARGE CONTROLLER FOR HY-1000L GENERATOR
Model
HY-C10-24AWM
HY-C10-48AW
Part No.
68648 P
68799 M
Nominal energy
1000 VA
1000 VA
Nominal power
1000 W
1000 W
PV nominal power
300 W
300 W
Voltage
24 VDC
48 VDC
Pure sine-wave
Pure sine-wave
AC inverter voltage
220 VAC
220 VAC
Dimensions mm (“)
490 x 470 x 220 (19.3 x 18.5 x 8.7)
490 x 470 x 220 (19.3 x 18.5 x 8.7)
Dry weight kg (lbs)
10 (22)
11 (24.2)
Inverter output wave
INDEX
UF
LE
X
UFLEX® - STAND-ALONE PV KITS
LIGHTING KITS
STAND-ALONE PV KITS
6.1
These kits provide 12VDC power for lighting gardens, garage, rural
houses, etc.
■ The kit includes:
2 solar panels
1 Morningstar® charge controller
1 battery
3 12 VDC lamps
2 connection cable
Model
Q.ty
Part No.
x3
U-KIT80
U-KIT120
U-KIT160
U-KIT200
U-KIT230
68681 M
68682 P
68683 S
68684 U
68685 W
PV panel
2
40 Wp
60 Wp
80 Wp
100 Wp
115 Wp
Charge controller
1
10 A with LVD
10 A with LVD
20 A with LVD
20 A with LVD
20 A with LVD
Battery
1
AGM 12V 60 Ah
AGM 12V 60 Ah
AGM 12V 90 Ah
AGM 12V 110 Ah
AGM 12V 110 Ah
Lamp
3
Connection cable
2
DC E27 12V/7W LED DC E27 12V/7W LED DC E27 12V/7W LED DC E27 12V/7W LED DC E27 12V/7W LED
3 m (9.8’)
3 m (9.8’)
3 m (9.8’)
3 m (9.8’)
3 m (9.8’)
HIGH POWER LIGHTING KITS
The amount of energy supplied allows, besides lighting, also the
operation of a refrigerator 12/24V.
■ The kit includes:
2 solar panels
1 Morningstar® charge controller
2 batteries
5 24 VDC lamps
2 connection cables
12/24V - 60 litres refrigerator is to be ordered separately - Part N°
61644 T
x5
Model
Q.ty
Part No.
INDEX
U-KIT490HP
68686 Y
PV panel
2
245 Wp
Charge controller
1
BlueSolar 20 A
Battery
2
GEL 12V 165 Ah
Lamp
5
LED DC E27 24V/7W
Connection cable
2
3 m (9.8’)
UF
LE
X
UFLEX® - PV KITS FOR CARAVANS
KITS 40 Wp ÷ 115 Wp
Kits designed to be used on campers, carvans, multivans etc.
Model
Q.ty
Part No.
U-KIT40
U-KIT60
U-KIT80
U-KIT100
U-KIT115
68678 Z
68679 B
66303 S
66304 U
66314 X
PV panel
1
40 Wp
60 Wp
80 Wp
100 Wp
115 Wp
Charge controller
1
10 A
10 A
10 A
10 A
10 A
Parallelator
1
4A
4A
4A
4A
4A
PV KITS FOR CARAVANS
6.2
■ The kit includes:
1 solar panel
1 charge controller
1 combiner
1 roof conduit complete with 3 m cable
1 pair of supports for solar panel
KIT 135 Wp
Kits designed to be used on campers, carvans, multivans etc.
■ The kit includes:
1 solar panel
1 charge controller
1 combiner
1 roof conduit complete with 3 m cable
1 pair of supports for solar panel
Model
Q.ty
Part No.
U-KIT135
68331 H
PV panel
1
135 Wp
Charge controller
1
10 A
Combiner
1
4A
INDEX
UF
LE
X
UFLEX® - SOLAR/WIND HYBRID SYSTEMS
12/24/48 VDC SILENTWIND® HYBRID SYSTEMS
Wind energy provided by Silentwind® turbines can be combined with
photovoltaic energy through the external Silentwind® charge
controller that is equipped with multi-function LCD display, manual
and alectronic switch-off, and is suitable for installations of solar
panels without need for additional equipment.
SOLAR/WIND HYBRID SYSTEMS
6.3
■ Features:
- Can be connected PV panels up to 180 Wp
- Automatic selection of battery voltage
(12/24/48 VDC)
- Two 12V versions available: 520W/12V, 600W/12V
- Two 24V versions available: 550W/24V, 630W/24V
- Easy to install
Battery rated voltage
12/24/48 VDC
Max capacity of turbine
600 W / 40 A
Max capacity of PV
550 Wp / 40 A / 50 VOC
Display
V, A, W, Ah, kWh
HYBRID SYSTEM WITH PURE SINE WAVE INVERTER
This integrated system, connected to a 230 VAC inverter, allows the use
of electrical currents as if there was a grid connection.
■ System components:
2 solar panels
1 junction box for two solar panels
1 hybrid charge controller
1 24V wind turbine
2 batteries supplied with fuse
1 pure sine wave inverter
5 24 VDC lamps
2 connection cable
Fixing elements (screws, rails, clamps)
12/24V - 60 litres refrigerator is to be ordered separately - Part N°
61644 T
Model
Q.ty
Part No.
68691 R
PV panel
2
245 Wp
Charge controller
1
BlueSolar 20 A
1
24 VDC
Pure sine wave inverter
1
24 VDC 800 W
Battery
2
AGM 24V 220 Ah
Lamp
5
DC E27 24V/20W LED
Connection cable
2
3 m (9.8’)
Wind turbine
with controller
INDEX
U-KI 490
x5
UF
LE
X
HYE® - SOLAR/WIND HYBRID SYSTEMS
USERS CA 220V
NOTE: for technical advice, please contact our Technical Service.
HYE® - HYBRID SYSTEMS WITH PURE SINE WAVE INVERTER
Wind turbines HY-400L (12VDC), HY-600L (24 VDC) and HY-1000L (24VDC) can be connected to solar modules through a
combi unit: charge controller/pure sine wave inverter with 230 VAC output.
Model
HY-400L-12V
HY-600L-24V
HY-1000L-24V
Part No.
68511 K
68643 D
68646 K
Power
400 W
600 W
1000 W
Peak power
500 W
750 W
1200 W
Voltage
12 V DC
24 V DC
24 V DC
2 m/s (4.5 mph)
2 m/s (4.5 mph)
2 m/s (4.5 mph)
Cut-in wind speed
2,5 m/s (5.6 mph)
2,5 m/s (5.6 mph)
3 m/s (6,7 mph)
Nominal wind speed
12 m/s (26.8 mph)
12 m/s (26.8 mph)
12 m/s (26.8 mph)
1,55 m (5.1’)
1,75 m (5.7’)
1,96 m (6.4’)
Start-up wind speed
Rotor diameter
Dimensions cm (“)
Dry weight kg (lbs)
25 (55.1)
28 (61.8)
Model
HY-WSC04-12AWM
HY-WSC06-24AWM
HY-C10-24AWM
Part No.
68512 M
68644 F
68648 P
Power
500 VA
600 VA
1000 VA
Wind turbine nominal power
500 W
600 W
1000 W
PV panel nominal voltage
150 W
150 W
300 W
Nominal voltage
12 V DC
24 V DC
24 V DC
Pure-sine wave
Pure-sine wave
Pure-sine wave
220 V AC
220 V AC
220 V AC
AC inverter voltage
Dimensions mm (“)
Dry weight kg (lbs)
HY-600L-12V
118x46x26 (46.5x18.1x10.2) 125x52x26 (49.2x20.5x10.2) 147x52x26 (57.9x20.5x10.2)
22 (48.5)
Inverter output wave
HY-400L-12V
SOLAR/WIND HYBRID SYSTEMS
6.4
USERS CC 12 O 24V
HY-1000L-24V
HY-WSC04
HY-WSC04
180x155x100 (7.1x6.1x3.5) 180x155x100 (7.1x6.1x3.5) 490x470x220(19.3x18.5x8.7)
1,7 (3.8)
1,7 (3.8)
10 (22.0)
HY-C10
INDEX
UF
LE
X
UFLEX® - HYLANDER™ SELF SUSTAINABLE POWER UNIT
HyLander is a hybrid power generator, capable of producing
energy from renewable sources such as solar and wind.
It supplies its output directly to the users or accumulates energy to
use it at a later stage, in a quiet and environmental compatible
way.
SELF SUSTAINABLE POWER UNIT
6.5
INDEX
The power is the main characteristic of HyLander, as it is capable of
delivering, in a constant and silent way, up to 5 kVA with a peak of
10 kW only using the energy stored into the battery. In case of
need, it can add additional power from the built-in generator,
which intervenes to handle high power consumption, granting
continuous autonomy to the system even in the absence of sun and
wind.
FEATURES
■
■
■
■
■
■
■
■
■
■
■
■
Hylander continuous output power: 5 kVA
Pre-assembled and factory tested, ready for use unit
Easily transportable
Energy from sun and wind at your service 365 days a year
Built-in backing generator and tank
Automatic management of energy demand
Remotely monitored via internet
High battery autonomy
Very quiet
Use of environmental compatible renewable energy
Designed and assembled in Italy
All system components are CE marked
HYLANDER
UF
LE
X
UFLEX® - HYLANDER™ SELF SUSTAINABLE POWER UNIT
APPLICATIONS
Shelters, pastures
Remote cottages, cabins
Elettrification of rural areas
Missions
Pumping water
Civil protection
Schools and hospitals in not grid-connected areas
Telecomunications
Monitoring Stations
Natural reserves
Not grid-connected small islands
Forest ranger Stations
Public events
...and everywhere you need energy, in a quiet,
clean and inexpensive way!
OPTIONALS
6.6
Picture purely indicative
Wind generator 160W to 100W
Converters DC/DC for direct use 12V or 24 V
Shelter support photovoltaic modules
Submersible pumps
MODEL
HYLANDER
Part No.
69957 J
Cont. output power 25°C
5000 VA
Peak power
10000 W
Genset cont. output power
6400 VA
PV modules power
Battery peak capacity
DOD
Max autonomy (12 batteries and 50% DOD)
Without sun, wind nor genset
From 1 kWp to 4 kWp according to working area
13,92 kWh or 20,88 kWh
Settable from 20% to 50% DOD
Up to 10 kWh
Output AC
230 V
Output DC
48 V (12 V and 24 V optional)
Dimensions mm (“)
SELF SUSTAINABLE POWER UNIT
■
■
■
■
■
■
■
■
■
■
■
■
■
■
1300 x 800 x 1550 (51.2 x 31.5 x 61.0)
INDEX
UF
LE
X
WHISPER POWER® - HYBRID POWER STATION: ALL-IN-ONE
The All-In-One PowerStation consists of a premium hybrid
diesel generator equipped with a high efficiency permanent
magnet alternator. This generator, with its compact form and
minimal noise output, works together with the sine wave
inverter and the battery charger (in a Combi unit) connected
to the long-life batteries.
ALL-IN-ONE POWER STATION
6.7
Inverter and diesel generator will operate in parallel during
high AC power consumption periods (7kVA). The inverter will
take over the power supply during low consumption periods.
Start&stop of the diesel generator is fully automatic.
It is a very easy solution fully pre-wired to install on the
vehicle. And just one point of contact for service and support.
With a universal connector, All-in-One PowerStation can be
plugged in to any country’s power connection worldwide (90260VAC, 50 or 60Hz).
The All-in-One solution will manage the source power
switching automatically from generator to grid to onboard
electrical system. The automatic start/stop of the generator is
based on battery voltage and on load demand.
The inverter is able to parallelize the grid power, adding to the
grid max power, its 3,5kVA of continuous power, grabbing the
energy from the batteries.
Model
All-In-One 7
Part No.
69814 K
Fuel
Diesel
Combined System Output
Generator Power @3000rpm (kW)
4,4kVA - 3,5kVA
Silent Power (inverter mode)
3,5kVA
Voltage output (V)
7kVA
Inverter efficiency
96%
Engine number of cylinders
Engine cooling
Fuel consumption, No load/full load (l/h)
Alternator
Battery pack included
Dimensions, included soundshield mm (“)
INDEX
7kVA
1
Oil cooled, by radiator
0,8 - 1,5 l/h
Air cooled permanent magnet
GEL 24V - 225Ah
600 x 1000 x 620 (23.6 x 39.4 x 24.4)
Weight kg (lbs)
300 (661.4)
Material/Color
Stainless steel
WHISPER POWER® - HYBRID POWER STATION: ALL-IN-ONE
ALL-IN-ONE APPEAL
UF
LE
X
One single housing for all the All-in-one Power Station
components permits a lot of space saving.
A full prewired and tested solution allows for an easy
and quick installation.
Here below it is possible to take a view at the basic
system layout.
SYSTEM COMPONENT LAY-OUT (SINGLE LINE DIAGRAM)
6.8
ALL-IN-ONE POWER STATION
The system can also be supplied in the form of
individual components for modular assembly.
INDEX
UF
LE
X
DYNAD® - FUEL CELL: HYDROMAX 150
INTERNATIONAL BV
The Hydromax 150 is a safe fuel cell able to deliver continuously 150 watt to the battery pack, either 12V or 24V, at all
times and in all conditions. The Hydromax 150 is able to supply continuously a charging current of 12,5 Amps.
The maximum charge capacity per day is than 300Ah.
The service or starting battery will never run out of power. It doesn’t matter whether is sunny or rainy and if is day or
night: your battery pack and your DC appliances will always be fed with electric energy by the fuel cell.
FUEL CELL - HYDROMAX
6.9
The Hydromax 150 will provide the energy for your day and night life on board of your camper, caravan or cottage
without noise and hazardous fuel!
With such an energy always charging your batteries, even the use of 1-2kW inverter becomes practical.
FUEL-CELL OPERATION
A fuel cell supplies electrical power using hydrogen and
oxygen: water is created as waste product. Because hydrogen
is difficult to transport, it is produced in the fuel cell itself. In
the case of the Hydromax, hydrogen is produced by combining
a salt solution with malic acid.
The salt solution and the malic acid are stored in separate
tanks and are then pumped into the Hydromax: the chemical
action of mixing the two fluids produces hydrogen.
After the Hydromax has been used, a washing cycle ensures
that the remnants of water and malic acid are discharged into
a holding tank, so that they can be safely removed later.
The waste water itself is completely safe and non-toxic.
COMPONENTS
- Hydromax 150 - 69967 M
- 5 litres canister for Hydrofuel (salt solution) - 69982 H
- 5 litres canister for Additive (malic acid) - 69983 K
Hydrofuel and malic acid are supplied in powder. The fuel can
be easily made in plastic jerry cans by mixing the special salt
powder with water. For four week’s average use, two jerry
cans are enough
INDEX
TANK
DYNAD® - FUEL CELL: HYDROMAX 150
INTERNATIONAL BV
■ Fuel cell technology: through a direct chemical reaction, the
fuel cell deliver reliable electrical energy, safely, quietly and
without excessive generation of heat. When batteries
discharges to a certain point, the fuel cell automatically
turns on and charges the batteries. When the batteries are
sufficiently charged, the fuel cell turns off again.
6.10
HYDROMAX 150
■ Easy operation: operation of the Hydromax is by two
buttons. The unit also comes with a remote control so that
the performance can be monitored if the Hydromax is
stowed away
■ Low noise: only the pumps of the Hydromax, which carry
the fluid are barely audible in operation
■ Maintenance free: the Hydromax cleans itself after every
loading procedure. Only if the fluids are consumed, a new 5
liter container can be connected. With a can you can do an
average of two weeks
■ Warranty: 2 years
REMOTE CONTROL INCLUDED
Model
Hydromax 150
Part No.
69967 M
Maximum power
180 W
Continuous power
150 W
Charging current @ 12 V
12.5 A
Charging capacity/day
300 Ah
Rated voltage
12 V
Nominal consumption/Kwh
1,25 L
Connectable with the battery types
Operating temperature
Dimensions
Weight
FUEL CELL - HYDROMAX
■ The fuel in use is neither inflammable nor explosive
therefore can be easily transported and safely stored.
A saline solution in conjunction with malic acid, (found in
apples and other fruit) supplies the chemical reaction.
The only waste product is a liquid, which consists of a small
quantity of malic acid, mixed with water. This mixture is not
harmful to the environment and is usually collected in a
holding tank and discharged later
UF
LE
X
Lead acid - Gel - AGM - Li-ion
From -20°C to +40°C
40 x 19 x 31 cm (15.8” x 7.5” x 12.2”)
9 kg (19.9 lbs)
INDEX
UF
LE
X
UFLEX® - SUPERLINE SOLAR/THERMAL COLLECTORS
UFLEX SUPERLINE solar/thermal collectors are manufactured with the
highest quality materials and latest technology obtaining the Solar
Keymark certification.
COLLECTOR PARTS
SOLAR/THERMAL COLLECTORS
7.1
(1) UV resistant 100% EPDM sealing gaskets.
(2) Extruded aluminium frame with electrostatic powder coating
finish.
(3) Direct injected CPF free polyurethane insulation.
Aluminium foil between polyurethane insulation and copper
tubes.
(4) Non glare tempered prismatic glass has a very low iron content: its
trasmitting capability is more than 91% and it is resistant even to
strong hailstorms.
(5) Copper riser tubes.
(6) Copper manifold tubes.
(7) Absorption is granted by a titanium dioxide coated full plate
copper, ultrasonic welded.
2
4
Model
Superline L
Part No.
66816 Y
Dimensions mm (“)
1204 x 1891 x 99
(47.4 x 74.4 x 3.9)
Weight kg (lbs)
41 (90.4)
Gross area
2.28 m2
Absorption area
2.12 m2
Fluid capacity
1,48 l
N° of risers tubes
Test pressure
Operation pressure
INDEX
SUPERLINE L
10
13.5 bar
9 bar
7
1
5
6
3
UF
LE
X
UFLEX® - THERMOSIPHON SOLAR WATER HEATERS
The system uses natural water circulation to heat up the water and
doesn’t require a pump or control unit.
UFLEX thermosiphon solar water heaters have high efficiency and
reliability in choosing materials.
Easy to install.
Thermosiphon solar water heaters need minimum maintenance so
they represent the most economic way to get hot water from the sun.
They are perfect for agritourism, small villas, beach resorts, small
hotels, camping and sports centres.
Natural water circulation systems include: one or more collectors,
horizontal tank, supporting framework, insulation connection pipes,
magnesium anode and convector heater fluid.
5 years warranty.
Model
Part No.
UFLEX KG150/M
UFLEX KG300
67185 U
67778 Y
1
2
Absorption area
1.96 m2
4.24 m2
Tank capacity
150 l
300 l
N° of Superline L collectors
Tank diameter mm (“)
Tank length mm (“)
Recommended persons
600 (23.6)
600 (23.6)
1045 (41.1)
1820 (71.6)
2-3
4-5
SOLAR/THERMAL COLLECTORS
7.2
Frameworks have to be ordered separately as shown in the following table:
SUPPORTING FRAMEWORKS:
System
UFLEX KG150/M
UFLEX KG300
Flat Roof - Part No.
Flat 150 - 67186 W
Flat 300 - 69946 D
Tiled Roof - Part No.
Tiled 150 - 67211 S
Tiled 300 - 67790 M
INDEX
RAIN WATER HARVESTING SYSTEM
CARAT™ TANKS
Capacity/litres: 2700 l, 3750 l, 4800 l, 6500 l, 7500 l, 9600 l and 13.000 l.
Designed to be used with telescopic dome shaft for pedestrian or
vehicle loading. The dome shaft complies with DIN.
610 mm
610 mm
2710 mm
610 mm
2430 mm
610 mm
2200 mm
RAINWATER HARVESTING SYSTEMS
8.1
GRAF® - RAINWATER HARVESTING SYSTEMS
2010 mm
UF
LE
X
2080 mm
2280 mm
66015 L
66014 J
65741 M
65742 P
2 x 66014 J
2 x 65741 M
2 x 65742 P
Capacity (litres)
2.700
3.750
4.800
6.500
7.500*
9.600*
13.000*
Length mm (“)
2.080 (81.9)
2.280 (89.8)
2.280 (89.8)
2.390 (94.1)
-
-
-
Depth mm (“)
1.565 (61.6)
1.755 (69.1)
1.985 (78.2)
2.190 (86.2)
-
-
-
Height (package included) mm (“) 2.010 (79.1)
2.200 (86.6)
2.430 (95.7)
2.710 (106.7)
-
-
-
150 (330.7)
185 (407.9)
220 (485.0)
Part No.
Package height mm (“)
610 (24.0)
Package inside diameter mm (“)
800 (31.5)
Weight kg (lbs)
120 (264.6)
Max axle load
2280 mm
2390 mm
Dimensions: see
3750 l tank
Dimensions: see
4800 l tank
Dimensions: see
6500 l tank
Carriageable
Covering ground
800 – 1200
*Covering ground recommended: at least 800 mm
Installation conditions
Mini telescope cover
INDEX
Telescope cast iron cover
Coverage heights
with telescopic
dome shaft in green
areas.
Maximum coverage
heights with intermediate section and
telescopic dome
shaft.
Covering heights
with cast telescopic
dome shaft (with
class B cast cover) in
areas with car traffic
(load up to 3.5 t).
Must not be installed below areas
used by vehicles
which are heavier
than passenger cars.
UF
LE
X
GRAF® - COLUMN AND SEMI-COLUMN
RAINWATER HARVESTING TANKS
■ Features: classic design, extremely stable, large storage capacity and
small ground area. The semi-column tank are designed to safe
space: only 515 mm depth. Plastic tanks are protected against
sunlightand UV light to ensure a long product life. Thread
connection makes the tap (accessories) easy to install without
drilling.
500 l.
330 l.
1000 l.
Transparent hose
with tap
Part No. – 64795 G
550 l.
SEMI-COLUMN
SYSTEM
550
COLUMN SYSTEMS
330
500
1000
2000
Part No. (sand colour)
64787 H
64788 K
64789 M
65747 A
Part No. (sand colour)
64792 A
Part No. (green colour)
-
-
64790 W
-
Part No. (green colour)
64793 C
Capacity
330 litres
500 litres
1000 litres
2000 litres
Capacity
550 litres
Max diameter mm (“)
590 (23.2)
730 (28.7)
910 (35.9)
1190 (46.9)
Width mm (“)
880 (34.7)
Height mm (“)
1610 (63.4)
1930 (76.0)
2220 (87.4)
2226 (87.6)
Height mm (“)
2120 (83.5)
Cover diameter mm (“)
200 (7.9)
200 (7.9)
200 (7.9)
200 (7.9)
Depth
515 litres
Weight kg (lbs)
12 (26.5)
23 (50.7)
40 (88.2)
56 (123.5)
Weight kg (lbs)
30 (66.1)
RAINWATER HARVESTING SYSTEMS
8.2
Empty the tank in case of risk of frost.
DELUX FILTER
-
Self-cleaning, low maintenance, downpipe stainless steel filter
High water yield (approx. 90%)
Overflow stop function
DN 70 (output) to DN 100
According to DIN 1986 rule, no reduction on downpipe filter
Recommended for roof surfaces up to approximate 100 m²
Easy to switch from summer to winter operation
Summer position
Winter position
INDEX
UF
LE
X
WALLAS® - DIESEL COTTAGE HEATERS
Wallas® diesel heaters are a perfect solution, easy to install, to heat
cottages, chalet, houses, shelters or everywhere the gas is not
available. It’s ideal for all off-grid environment.
Two heating power models available: 2,6 and 4 kW.
COTTAGE HEATERS
8.3
The heater burns with a clean laminar blue flame. Fully enclosed
burner technology makes it smoke and odor- free. A laminar flame is
most familiar from candles, and the sound level is absolutely low.
Clean burning technology allows for long service intervals.
You can choose between heaters with graphite grey or brown pine
silhouette finishes.
26 CC
PREHEAT YOUR COTTAGE
With the new remote control system, even far from the cottage, you
can switch the heater on and off, adjust the temperature, check the
temperature of the room and the voltage of the battery operating
directly from your smartphone, tablet, or computer (possible by the
help of Wallas Remote Control System 4430).
TECHNICAL SPECIFICATIONS
Model
40 CC
Wallas 26 CC
Wallas 40 CC
Part No.*
69901 E
69902 G
Fuel
Diesel
Diesel
12 V
12 V
Heating Power (kW)
0.9 - 2.6
1.6 - 4.0
Fuel consumption (l/h)
0.09 - 0.26
0.16 - 0.4
0.2 - 0.4
0.2 - 0.4
Operating voltage
Electricity consumption (A)
Dimensions mm (“)
Weight kg (lbs)
Designed to heat
730 x 340 x 200 (28.7 x 13.4 x 7.9)
730 x 440 x 240 (28.7 x 17.3 x 9.5)
18.5 (40.8)
25 (55.1)
2
40 - 60 m floor
*Part Numbers refer to heaters without covers.
It is necessary to select a cover according to personal preference:
■
■
■
■
INDEX
26GF - 69937 C - Graphite grey cover for 26CC
26PF - 69938 E - Finishing brown cover for 26CC
40GF - 69939 G - Graphite grey cover for 40CC
40PF - 69940 R - Finishing brown cover for 40CC
60 - 90 m2 floor
UF
LE
X
WALLAS® - DIESEL COTTAGE HEATERS
OFF-GRID TYPICAL INSTALLATION
Due to the 12V power supply and the really low
electrical power consumption (less than 5W at full
power), the Wallas® cottage heater work perfectly with
your solar panel.
Althoug it is possible to use the heater with standard
grid supply 110/230Vac with a simple 12Vdc basic
converter.
INSTALLATION
The Wallas® cottage heater system can be installed through
the wall or to the chimney.
Wallas® offers two kits prepared for the two different
installations.
The kits contains:
Wall installation kit, for 26 CC / 40 CC
■ 4004 Exhaust through-wall head
■ 4030 ro liters tank
■ 4880 Exhaust through-wall kit
■ 4430 Remote control system
Chimney installation kit, for 26 CC / 40 CC
■ 4030 30 liters tank
■ 4880 Exhaust through-wall kit
■ 4430 Remote control system
COTTAGE HEATERS
8.4
To ensure the highest quality, every single Wallas® product is manually tested before delivery.
Warranty: 3 years
INDEX
UF
LE
X
STOVE AND DIESEL HEATER
8.5
WALLAS® - STOVE AND DIESEL HEATER
Dedicated to the camper world, Wallas® developed an unique
product! It’s a ceramic stove, and a real heater, combined in a
single unit, that using the diesel fuel, avoid any need of gas bottle!
Unique solution to transform your stove into a silent 1,8 kW
camper heater!
The cooker control panel, becomes the thermostatic control able to
reach and maintain constant the set internal temperature. The unit
works with minimum electrical consumption and in complete
silence, thanks to the laminar combustion technology, patented by
Wallas®.
Wallas XC Duo is a perfect heating and cooking system for small
campers, vans, pick-up where space and weight represent key
factors for the vehicle.
Ceramic diesel stove
That’s why the stove and heater XcDuo is deal for camper owners
demanding:
■ It can replace the standard gas stove
- Eliminating the gas bottles, valves, piping and related
maintenance
- Eliminating risks due to propane presence on board
- Avoiding the boring search of tank seller in foreign countries
- Offering the space of the gas cylinders for storing other things
- Saving weight by eliminating gas cylinders and accessories
- Diesel is taken from the main tank. Diesel is available almost
everywhere
- Parking in public car parks and garages is allowed
■ It can replace the standard vehicle system beacause, with the
blower lid, the system represents a solid alternative to the
classic 2kW heater
- Heating power: 1,8kW
- Positioned in a central area, it doesn’t need a dedicated air
canalization
- It is much guiter than a tipical heater with turbolent
technology (Webasto / Eberspaecher): 52dB Vs 60-63dB
- The electrical consumption definitely low, thanks to the
combustion process and to the PM brushless motors
- Heat capacity per Amp/hour is excellent at 0,47 A/h per kW
heating power
EASY TO USE
■ Simply press the button to start the cooker
■ Twist the knob to adjust the power / thermo regulation
■ High altitude capability for cooking and heating up to 3100 m.
To be activated manually. Switching point at 1300 m / 4200 ft
SAFE
■ No open flame. The combustion process takes place in a closed
loop with the help of a combustion fan. The process is fully
automatic and tolerant of the changes in the air pressure
■ Combustion adds no moisture or odor to the living areas; no
need to keep windows open
INDEX
1,8 KW
Diesel heater
UF
LE
X
WALLAS® - STOVE AND DIESEL HEATER
EASY TO INSTALL
STOVE AND DIESEL HEATER
8.6
TECHNICAL SPECIFICATIONS
Model
Part No.
XC Duo
69195 H
Fuel consumption
0.9 - 0.18 l/h
Power
0.9 - 1.8 KW
Operating voltage
Electricity consumption
Dimensions mm (“)
Weight kg (lbs)
12 V
0.55 - 0.85 A
343 x 456 x 208 (13.5 x 18.0 x 8.2)
12 (26.5)
Exhaust terminal position
To ensure the highest quality, every single Wallas® product is manually tested before delivery.
Warranty: 3 years
INDEX
UF
LE
X
SHURFLO® - PUMP
FOR PV SYSTEMS FOR PUMPING
WATER FROM WELLS
SUBMERSIBLE PUMP FOR DEEP WELL
PUMP FOR PV SYSTEMS FOR PUMPING WATER FROM WELLS
9.1
These diaphragm pumps are designed to be installed in well with at
least 100 mm of diameter, up to 70 m of depth.
■ Features: Flow rate per hour: 220-230 ltres of water. The pump
operates with 2 x 48 watt solar modules, absorbing 4 amps. The
main features of this pump include an internal bypass which
prevents idraulic overload in case of too deep submersion of the
unit and dry running capability without pump damage.
Model
Pump 9300
Part No.
62473 X
Voltage
24 V
Flow rate
220-230 l/h
Self-priming
up to 30 m
Max head
up to 70 m
Max absorption
4A
Weight kg (lbs)
2,72 (6)
PUMP 9300 FLOWCHART
Total
head
Flow rate
Min power
PV system
Amp
6,1 m
443 l/h
58 W
1,5 A
12,2 m
432 l/h
65 W
1,7 A
18,3m
413 l/h
78 W
2,1 A
24,4 m
401 l/h
89 W
2,4 A
30,5 m
390 l/h
99 W
2,6 A
36,6 m
382 l/h
104 W
2,8 A
42,7 m
375 l/h
115 W
3,1 A
48,8 m
371 l/h
123 W
3,3 A
54,9 m
352 l/h
135 W
3,6 A
61,0 m
345 l/h
141 W
3,8 A
70,1 m
310 l/h
155 W
4,1 A
LCB PUMP CONTROLLER
SHURflo LCB pump controllers are high quality DC power converters
designed to interface between a DC (solar) pump, (e.g. SHURflo 9300
Series) and the DC power source solar panels or batteries, etc. Their
main function is to maximise the daily output of water while providing
protection for the pump.
When used in a solar pumping system, directly connected to solar
power, it will protect the pump from over-voltage and over-current
conditions and will also provide current boosting in low sunshine
conditions.
G-75 - 62475 B
INDEX
UF
LE
X
UFLEX® - SOLAR LIGHTING
FOR ROADS, PARKS AND GARDENS
LED STREET LIGHT - BQ-RL900 LED 30W-12V
- Supplied with a device to transfer of passive heat at long-distance
- Low weight: 4,9 kg only
- CE
Model
BQ-RL900 LED 30W-12V
Part No.
69448 L
Led lamp output lumens
3000 Lm
Rated voltage
12 V DC
Rated current
2,5 A DC
Rated power
30 W
Operating voltage
12V
Cool white light temperature
6,000 ≈7,000 K
Warm white light temperature
2,700 ≈3,500 K
Operating temperature
-40 +45 °C
IP protection
Duration
Dimensions mm (“)
Weight kg (lbs)
9.2
SOLAR LIGHTING
■ Features:
- High-brightness LEDs (Osram oval)
IP 65
> 50,000 hours
520 x 240 x 120 (20.5 x 9.5 x 4.7)
4,9 (10.8)
FULL KIT FOR LIGHTING - 68713Y
The kit includes:
- LED street light: 69448 L
- Arm for street light: 69031 A
- Pole supports for 1 PV panel and battery box: 69059 Z
- 1 115 Wp solar panel: 69078 D
- 1 AGM 100Ah 12 VDC battery: 66606 L
- 1 SunLight™ 12 VDC charge controller with LVD
- Fixing components:
- 2 750 mm mounting rails: 68162 L
- 4 end clamps: 66289 B
- 4 M12 brackets: 66845 F
- 4 screws 81601 L + 4 nuts 67044 Z
INDEX
UF
LE
X
UFLEX® - SOLAR LED MARINE LANTERNS
Light and compact marine lanterns, equipped with ultra bright LEDs and built-in solar charging.
■ Marine applications:
Navigation buoys; Mooring buoys; Private docks and marinas; Input channels to ports and marinas; Lagoon vie and
navigation channels; Offshore oil and gas infrastructure; Areas restricted to navigation; Booms; Buoys research
institutions; Protected marine parks, perimeters in aquaculture farms, etc.
MARINE LANTERNS
9.3
■ Land applications:
Bus stop signals; Emergency telephones; Camping services; Agricultural buildings etc.
M550 MODEL - Visibility up to 2-3 miles (depending on the installation area and flashing applied)
Waterproof, robust: it is not damaged by vibration or motion of the sea, is vandal-resistant and requires no
maintenance. Available with 40 flashes + steady light 69945 B (optional).
Peak intensity (white LED)
Available LED colours (IALA specifications)
Operating temperature
26 cd
red, green, blue, yellow, white
from -30 to +50 °C
Polycarbonate lenses
Battery (5 years average life)
UV-stabilized
not replaceable
IP protection
IP68
Weight kg (lbs)
0.37 (0.8)
Certifications: CE EN 60945:1997, RoHS compliant.
M650 MODEL - Visibility 3 nautical miles (3,6 km) in most conditions
High performance, waterproof, resistant to sea waves, it requires no maintenance.
It can be setted when ordering: more than 256 flashes available + steady light.
Solar panel
Peak intensity (green LED)
Available LED colours (IALA specifications)
Operating temperature
Polycarbonate lenses
High quality pure lead battery
IP protection
Weight kg (lbs)
1,6 W with MPPT technology
44 cd
red, green, blue, amber, white
from -43 to +51 °C
UV-stabilized
5 years life
IP68
1,58 (3.5)
Certifications:
SCL.110.3 MODEL - Visibility more than 3 nautical miles (3,6 km) in areas of lower sunlight levels
High performance, waterproof, resistant to sea waves, it requires no maintenance.
It can be setted by infrared remote control - 67622 P
Solar panel
Peak intensity (green LED)
Available LED colours (IALA specifications)
Operating temperature
50 cd
red, green, yellow, white
from -40 to +60 °C
Lenti policarbonato
UV-stabilized
High quality Lithium-ion battery
10 years life
IP protection
Weight kg (lbs)
Certifications:
INDEX
4,2 W with MPPT technology
IP67
4,2 (9.3)
UFLEX S.r.l.
Via Milite Ignoto 8A
16012 Busalla (GE) - Italy
T +39 010 9620228 / 203 / 230 F +39 010 9620333
ut@ultraflexgroup.it
www.ultraflexgroup.it
ULTRAFLEX GROUP