2131 ADJUSTABLE ® BeveLEDmini PROJECT INFORMATION PROJECT Covered By US Patents 7,832,889 and 8,684,570 DATE TYPE 1" REGRESS BeveLED mini Recessed Adjustable - The BeveLED mini provides maximum delivered lumens and optical performance through the optimization of thermal, optical and LED science in the smallest possible aperture. 1" Regress DELIVERED PERFORMANCE Bevel Finish 14 Watts BeveLEDmini ADJUSTABLE Color Rendering Index Lumens per Watt Source Lumens Delivered Lumens Center Beam Candle Power (10°) Color Consistency 20 Watts 90+ 90+ 80+ HIGH 80+ HIGH CRI CRI CRI CRI 45 36 37 30 1100 825 1500 1050 625 500 800 650 7825 6250 10050 8025 2-Step MacAdam Ellipse Flange Finish 13⁄4" x 13⁄4" 3" x 3" 4" x 4" Performance based on 3000K 2700K CCT MULTIPLIER Color Rendering Index Multiplier for Lumen Output 80+ CRI 90+ HIGH CRI 1.00 0.73 3000K 3500K 4000K 80+ CRI 90+ HIGH CRI 80+ CRI 80+ CRI 1.00 .80 1.15 1.07 HOW TO SPECIFY Ordering Example: Specify trim code and housing code to order: Example: 2131W - B1 - C - 10 - LSTA3 - 8414 - M2 - 27KS - 10 - NC1 - 277V - DIML2 - CB27 TRIM ORDERING INFORMATION TRIM 2131 2131 Square Adjustable – ______ Wet location 1 W LENS BEVEL STYLE OPTION – B1 1” Regress Bevel, Painted Die Cast Matches Flange Finish AB1 1” Regress Bevel, Black Anodized AC1 1” Regress Bevel, Clear Matte Anodized (Order separately) – S F C N Solite Frosted Clear No Glass 1 Wet location, use with B1 trims only. WATTAGE – LSTA3 LSTA3 ENGINE CODE COLOR REFLECTOR – M2 – 8414 14W LED, 625 lumens 8420 20W LED, 800 lumens M2 – 27KS 30KS 35KS 40KS 27KH 30KH AL10D Refer to optical AL15D accessories matrix AL20D on next page for resulting AL30D beamspreads AL40D when accessory AL55D lens is combined AL80D with 10° and 25° optics AS61D Clearly specify quantity in your order 01 Clear Matte (AC Bevel only) 02 Black Anodized (AB Bevel only) 10 White 13 Statuary Bronze 21 Black 28 Metalized Grey RAL Custom Color (specify RAL #) HOUSING ORDERING INFORMATION HOUSING CODE OPTICAL ACCESSORIES FLANGE FINISH HOUSING TYPE – SELECT ONE VOLTAGE – 2700K, 80+ CRI 10 10° beam NC1 New Construction 3000K, 80+ CRI 25 25° beam CP Chicago Plenum 2 IC Insulation-Contact 3500K, 80+ CRI Rated / Airtight 2 4000K, 80+ CRI 2700K, 90+ CRI 3000K, 90+ CRI – 120V 277V 120V 2 Step MacAdam ellipse is standard for all. USAI Lighting ® www.usailighting.com info@usailighting.com 2 Not available with EM. 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 DIMMING DRIVER OPTIONS ACCESSORIES – For use with 120V or 277V CB27 27” C-Channel Bars DIML2 0-10V dim, 10% CB52 52” C-Channel Bars (provided standard) EML Emergency battery 3 2-wire, 120V only EMLW Emergency battery, DIML4 Lutron Hi-Lume 1% wet location 3 3-wire/ECO DIML6A EldoLED 0-10V, 0.1%, logarithmic / Lutron controls DIML6B EldoLED 0-10V, 0.1%, linear controls DIML6E EldoLED 0-10V, 1%, logarithmic/Lutron controls DIML6F EldoLED 0-10V, 1%, linear controls DIML7 EldoLED DALI, 0.1% For use with 120V only DIML3 Lutron Hi-Lume 1% 2-wire, 120V only 3 EM requires above ceiling DIML9 TRIAC 15% 2-wire, 120V only access. For use with NC1 housing only. DIML19 Phase 2-wire dimming, 1% 120V only © 2013. USAI, LLC. All rights reserved. All designs protected by copyright. Revised 08/01/2016 ADJUSTABLE ® BeveLEDmini 2131 TRIM INFORMATION BeveLED Mini Optical Accessories Matrix if you want… and you have…. 10° 25° 15° beam AL10D N/A 20° beam AL15D N/A 25° beam AL30D N/A 30° beam N/A AL20D 35° beam N/A AL30D 40° beam N/A AL40D 45° beam N/A AL55D 55° beam N/A AL80D 20x60° beam AS61D N/A 40x60° beam N/A AS61D size D size D 13⁄4" x 13⁄4" 3" x 3" 4" x 4" HOUSING INFORMATION New Construction Housing - NC1 IC / Airtight - IC Chicago Plenum - CP 51/2" 71/2" 1" 191/8" 1" 6 /8" 7 81/2" 101/8" 12" 151/2" 11/2" 175/8" (Plan View) SPECIFICATIONS TRIM: 3" square aperture with a 1" regressed bevel and 1/2" flange, retained by two mounting clips. Die cast aluminum bevel is self-flanged and is available in white, statuary bronze, black, and metalized grey finishes. Also available in black anodized or clear matte anodized bevel, with self finish or with contrasting painted flange. Custom color flanges available (provide RAL#). THERMAL MANAGEMENT: Proprietary high performance aluminum die cast heatsink for maximum LED life. Ambient temperatures at fixture location should not exceed 40°C during normal operation. HOUSING: All-Ways Square® (covered by US Pat. No: US 7,832,889) housing allows alignment of square aperture (up to 20° rotation) after housing installation and prior to finish ceiling installation. Fabricated of 20 ga. galvanized steel with thru wire FIELD REPLACEABLE DRIVER: 0-10V, 100%-10% solid state J-box, 4 in 4 out at min. 90°C, #12 AWG thru branch electronic constant current DIML2 dimmingdriver with a circuit wiring. IC-rated housings for use with 14W high power factor provided standard and sources 2mA. light engines only are rated for direct contact with TRIM LENS: BeveLED mini adjustable trims are available Specify 120V or 277V. Driver complies with IEEEC62.41 spray foam insulation of R-42 per inch or less. ICwith several trim options. The 25° optic is designed for use surge protection. rated housings for use with 20W light engines are with a solite lens (specify “S”). The 10o optic is designed for rated for direct contact with spray foam insulation use with no lens in place (specify “N”), but clear glass (“C”) DIMMING OPTIONS: Multiple dimming drivers available. of R-3.7 per inch or less. See compatibility chart attached. Some on-time delay may is provided if the wet location option is selected. A frosted be experienced depending on control system used. Note: glass lens (“F”) option is available for both beamspreads. MAXIMUM CEILING THICKNESS: As per drawings DIML6Aand DIML6E logarithmic control are intended for above. REFLECTOR: Proprietary 10° or 25° high efficiency molded use with Lutron control systems; DIML6B and DIML6F optic. ACCESSORY HOLDER: Snap in accessory holder linear control are intended for use with non-Lutron shipped with fixture. Accepts “D” size lens, controls. DIML6 dimming drivers source 2mA. ADJUSTMENT: True hot aiming with center beam optics is maximum of 2. adjustable, with a completely tool-less mechanism. 0°-40° EMERGENCY: Emergency lighting battery pack with remote lockable vertical tilt with 362° lockable rotation. CEILING CUT OUT: 3-1/2" x 3-1/2" test switch requires above ceiling access for service. Bodine 17C provides 200mA for 90 minutes; delivers 325 FIELD REPLACEABLE LIGHT ENGINE: Available in 2 lumen LISTINGS: Dry/Damp. Wet location option available. lumens. EMLW wet location option is available with B1 trim packages: 14W (625 delivered lumens), 20W (800 lm). Engine NRTL/CSA-US tested to UL standards. IBEW union only and requires remote test switch. EM option is available is field replaceable through the aperture without tools. made. with NC1 housings only. COLOR: BeveLED mini is available in 4 color temperatures WARRANTY: 5 years MOUNTING: Butterfly brackets and adjustable nailer bars (2700K, 3000K, 3500K, 4000K). All color options are tightly with integral nails provided. Nailer bars are extendible from NOTES: binned for fixture-to-fixture color consistency within a 14" to 24" centers. • Not for use in corrosive environment. 2-Step MacAdam Ellipse. 80+ color rendering index provided • Use of pressure washer voids warranty. standard. 90+ CRI available for 2700K and 3000K CCTs. PHOTOMETRICS: Consult factory or website for IES files. Tested in accordance with IESNA LM79-2008. RATED LIFE: Based on IESNA LM80-2008 50,000 hours at 70% lumen maintenance (L70). USAI Lighting ® www.usailighting.com info@usailighting.com 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2013. USAI, LLC. All rights reserved. All designs protected by copyright. Revised 08/01/2016 ADJUSTABLE ® BeveLEDmini 2131 DELIVERED PERFORMANCE 2131 / 2431 14W 30KS 10° 2131 / 2431 20W 30KS 10° USAI Lighting ® www.usailighting.com info@usailighting.com 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2013. USAI, LLC. All rights reserved. All designs protected by copyright. Revised 08/01/2016 ADJUSTABLE ® BeveLEDmini 2131 DELIVERED PERFORMANCE 2131 / 2431 14W 30KS 25° 2131 / 2431 20W 30KS 25° USAI Lighting ® www.usailighting.com info@usailighting.com 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2013. USAI, LLC. All rights reserved. All designs protected by copyright. Revised 08/01/2016 DIMMING DRIVER COMPATIBILITY SELECTION GUIDE DIML2 ® USAI Lighting DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). DIML2 LED: 0-10V Dimming Driver Wiring (Dims down to 10%) DIML2 Dimmer Compatibility Chart Manufacturer 120V / 277V Crestron Crestron Crestron Crestron Crestron Leviton Lightolier (Philips) Lutron Product Part Number Dimmed Light Output Range iLux dimmer expansion module DIN Rail dimmer DIN Rail analog output module 8 Channel dimmer module 8 Channel dimmer module IllumaTech dimmer Vega Diva CLS-EXP-DIMFLV DIN-4DIMFLV4 DIN-A08 GLX-DIMFLV8 GLXP-DIMFLV8 IP710-DLX V2000FAMU DVTV-XX 100% - 10% 100% - 10% 100% - 10% 100% - 10% 100% - 10% 100% - 10% 100% - 10% 100% - 10% Qty Fixtures Per Dimmer* Use source current per fixture specification sheet to determine number of fixtures per dimmer. Max number of fixtures is limited by dimmer load rating. * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details. DIML2 0-10V DIMMING W/RELAY TO SWITCH POWER FIXTURE DIMMER: 0-10V (BY OTHERS) 0-10V (-) GRAY 0-10V (+) PURPLE SWITCHED HOT BLACK NEUTRAL WHITE LED DRIVER V+ RED V- BLACK NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together. GREEN GND CLASS 2 CONTROL WIRES LINE RELAY (BY OTHERS) NEUTRAL DIMMER: 0-10V w/ POWER SWITCHING DIML2 0-10V DIMMING (NO RELAY) FIXTURE (BY OTHERS) LINE 0-10V (-) GRAY 0-10V (+) PURPLE SWITCHED HOT BLACK NEUTRAL WHITE LED DRIVER V+ RED V- BLACK NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together. GREEN GROUND GND NEUTRAL USAI Lighting ® www.usailighting.com info@usailighting.com 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-2 Revised 02/15/2016 DIMMING DRIVER COMPATIBILITY SELECTION GUIDE DIML3 ® USAI Lighting DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). DIML3 LED: Lutron Hi-Lume A-Series 2 Wire Fwd Phase (with neutral) / LED Dimming Driver Wiring (Dims down to 1%) 120V only. DIML3 Dimmer Compatibility Chart Manufacturer 120V Only ETC ETC Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Product Part Number Dimmed Light Output Range Sensor+ Cabinet Unison DRd Cabinet Maestro Wireless® 600W dimmer Maestro Wireless® 1000W dimmer HomeWorks® QS adaptive dimmer HomeWorks® QS 600W dimmer HomeWorks® QS 1000 W dimmer Caseta Wireless® Pro 1000W dimmer Stanza® dimmer RadioRA® 2 adaptive dimmer RadioRA® 2 1000 W dimmer myRoom DIN power module HomeWorks® QS wallbox power module Homeworks® DIN power module HomeWorks® wallbox power module GRAFIK Eye® QS control unit GRAFIK Eye® 3000 control unit RPM-4U module RPM-4A module GP dimming panels Ariadni CL 250W dimmer Diva CL 250W dimmer Grafik T CL or RF CL dimmer Nova T CL 250W dimmer ELV10 ELV10 MRF2-6ND-120MRF2-10ND-120HQRD-6NAHQRD-6NDHQRD-10NDPD-10NXDSZ-6NDRRD-6NARRD-10NDMQSE-4A1-D HQRJ-WPM-6D-120LQSE-4A1-D HWI-WPM-6D-120 QSGR-, QSGRJGRX-3100-, GRX-3500HW-RPM-4U-120, LP-RPM-4U-120 HW-RPM-4A-120, LP-RPM-4A-120 Various AYCL-253PDVCL-253P-, DVSCCL-253PGT-250M-, GTJ-250MNTCL-250- 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100% - 1% 100%-1% 100%-1% 100%-1% 100%-1% Qty Fixtures Per Dimmer* Fixture Wattage 39W and Less 40W - 80W 1 – 26 1 – 13 1 – 26 1 – 13 1–8 1–4 1 – 13 1–6 1–8 1–4 1–8 1–4 1 – 13 1–6 1 – 13 1–6 1–8 1–4 1–8 1–4 1–6 1–3 1–6 1–3 1 – 26 1 – 13 1–6 1–3 1 – 26 1 – 13 1 – 26 1 – 13 1 – 26 1 – 13 1 – 26 1 – 13 1 – 26 1 – 13 1 – 26 1 – 13 1–8 1–4 1–8 1–4 1–8 1–4 1 – 10 1–5 * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details. DIML3 2 WIRE PHASE DIMMING FIXTURE DIMMER: 2 WIRE PHASE (BY OTHERS) LED LINE SWITCHED HOT NEUTRAL GROUND BLACK WHITE DRIVER V+ RED V- BLACK GREEN GND ONLY FOR SWITCHES WITH NEUTRAL NEUTRAL USAI Lighting ® www.usailighting.com info@usailighting.com 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-3 Revised 02/15/2016 DIMMING DRIVER COMPATIBILITY SELECTION GUIDE DIML4 ® USAI Lighting DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%) DIML4 3-Wire Dimmer Compatibility Chart Manufacturer 120V Only ETC ETC Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron 277V Only ETC ETC Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Lutron Product Part Number Dimmed Light Output Range Sensor+ Cabinet Unison DRd Cabinet Nova T Nova T Nova Nova Vareo Skylark Diva Ariadni Vierti Maestro Maestro Wireless RadioRA 2 HomeWorks QS Interfaces GP Dimming Panels D20 Dimming module D20F Dimming module NTF-10NTF-103PNF-10NF-103PVF-10SF-10P-, SF-103PDVF-103P-, DVSCF-103PAYF-103PVTF-6AMAF-6AM-, MSCF-6AMMRF2-F6AN-DVRRD-F6AN-DVHQRD-F6AN-DV PHPM-3F-120, PHPM-3F-DV Various 100% - 1% 100% - 1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% Sensor+ Cabinet Unison DRd Cabinet Nova T Nova T Nova Nova Skylark Diva Ariadni Vierti Maestro Maestro Wireless RadioRA 2 HomeWorks QS Interfaces GP Dimming Panels D20 Dimming module D20F Dimming module NTF-10-277NTF-103P-277NF-10-277NF-103P-277SF-12P-277-, SF-12P-277-3 DVF-103P-277-, DVSCF-103P-277AYF-103P-277VTF-6AMAF-6AM-277-, MSCF-6AM-277MRF2-F6AN-DVRRD-F6AN-DVHQRD-F6AN-DV PHPM-3F-DV Various 100% - 1% 100% - 1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% 100%–1% Qty Fixtures Per Control* Fixture Wattage 39W and Less 40W - 80W 1–53 1–26 1–53 1–26 1–41 1 – 20 1–20 1 – 10 1–41 1 – 20 1–20 1 – 10 1–20 1 – 10 1–20 1 – 10 1–20 1 – 10 1–20 1 – 10 1–15 1–7 1–15 1–7 1–15 1–7 1–15 1–7 1–15 1–7 1–41 1 – 20 1–41 1 – 20 40W and Less 41W - 80W 1–53 1–26 1–53 1–26 1–44 1 – 22 1–33 1 – 16 1–44 1 – 22 1–33 1 – 16 1–33 1 – 16 1–33 1 – 16 1–44 1 – 22 1–33 1 – 16 1–20 1 – 10 1–33 1 – 16 1–33 1 – 16 1–33 1 – 16 1–88 1 – 44 1–88 1 – 44 * NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details. DIML4 wiring diagrams continued on next page USAI Lighting ® www.usailighting.com info@usailighting.com 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-4 Revised 02/15/2016 DIMMING DRIVER COMPATIBILITY SELECTION GUIDE DIML4 Continued ® USAI Lighting DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). DIML4 LED: Lutron Hi-Lume A-Series LED Driver with 3-Wire FL Control / LED Dimming Driver Wiring (Dims down to 1%) DIML4 3 WIRE PHASE DIMMING FIXTURE DIMMER: 3 WIRE PHASE (BY OTHERS) CAP UNUSED ECOSYS WIRES DIMMED HOT SWITCHED HOT NEUTRAL LINE LED PURPLE GRAY PURPLE ORANGE BLACK WHITE GREEN GROUND DRIVER V+ RED V- BLACK GND NEUTRAL DIML4 LED: Lutron Hi-Lume A-Series LED Driver with EcoSystem Control / LED Dimming Driver Wiring (Dims down to 1%) Manufacturer 120V / 277V Lutron Lutron Lutron Lutron DIML4 EcoSystem Dimmer Compatibility Chart Dimmed Light Part Number Output Range Product PowPak dimming module Energi Savr Node GRAFIK Eye QS (120V ONLY) Quantum RMJ-ECO32-DV-B QSN-1ECO-S, QSN-2ECO-S QSGRJ-_E, QSGR-_E Various 100%–1% 100%–1% 100%–1% 100%–1% Qty Fixtures Per Control* Fixture Wattage 39W and Less 40W - 80W 1–32 1 – 16 1–64 1 – 32 1–64 1 – 32 1–64 1 – 32 * NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details. DIML4 EcoSystem CONTROLS ECOSYS BUS E2 E1 E2 FIXTURE E1 WALL CONTROL (BY OTHERS) LINE NEUTRAL CAP UN-USED ORANGE WIRE PURPLE GRAY PURPLE ORANGE BLACK WHITE GREEN LED DRIVER V+ RED V- BLACK GND USAI Lighting ® www.usailighting.com info@usailighting.com 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-4 Revised 02/15/2016 DIMMING DRIVER COMPATIBILITY SELECTION GUIDE DIML6A, 6E DIML6B, 6F ® USAI Lighting IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). DIML6A and DIML6E LED Dimming Compatibility Table DIML6A and DIML6E are linearly programmed dimming drivers for use with logarithmic-style dimming controls (e.g., Lutron and others listed in the table below) DIML6A = EldoLED SOLOdrive 0-10V control dims from 100% to 0.1% DIML6E = EldoLED ECOdrive 0-10V control dims from 100% to 1% Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* Refer to manufacturer's 120V & 277V DIML6A / E Lutron Diva DVTV/NFTV/NTFTV with PP-20 99% - 0.1% / 1% dimmer load rating for Lutron Energi Savr Node QSN-4T16-S 100% - 0.1% / 1% maximum and minimum Lutron GP Dimming Panels TVM2 Module 99% - 0.1% / 1% fixture quantities per Lutron Interfaces GRX-TVI w/ GRX3503 100% - 0.1% / 1% dimmer. Sensor Switch nIO nIO EZ 100% - 0.1% / 1% * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details. DIML6B and DIML6F LED Dimming Compatibility Table DIML6B and DIML6F are logarithmic-programmed dimming drivers for use with linear-style dimming controls (e.g., Crestron, non-Lutron and others listed in the table below) DIML6B = EldoLED SOLOdrive 0-10V control dims from 100% to 0.1% DIMMER: 0-10V DIML6F = EldoLED ECOdrive (BY OTHERS) 0-10V control dims from 100% to 1% 0-10V (-) GRAY 0-10V (+) PURPLE LED DIML6B Dimmer Compatibility Chart Dimmed Light Qty Fixtures V+ RED SWITCHED HOT SWITCHED HOTNumber DRIVER Manufacturer Product Part Output Range Per Dimmer* VBLACK NEUTRAL WHITE Refer to 120V & 277V DIML6B / F GREEN 2112U-101 Bush-Jaeger Electronic potentiometer 100% - 0.1% / 1% manufacturer's Jung Electronic potentiometer 100% - 0.1% / 1% dimmer load GND 240-10 CLASS 2 CONTROL WIRES Leviton IllumaTech dimmer IP710-DLX 100% - 0.1% / 1% rating for LINE Lightolier (Philips) Momentum (120V ONLY) ZP600FAM120 100% - 0.1% / 1% maximum and RELAY Merten Electronic potentiometer 5729 100% - 0.1% / 1% minimum fixture (BY OTHERS) DIML6A, 6B Pass & Seymour Titan CD4FB-W 100% - 0.1% / 1% quantities per NEUTRAL TO SWITCH POWER Watt Stopper Miro 0-10V DIMMING W/RELAY DCLV1 100% - 0.1% / 1% dimmer. Synergy Wallbox Dimmers ISD BC 100% - 0.1% / 1% ABB i-bus SD/S 2.16.1 100% - 0.1% / 1% Crestron Modules GLX-DIMFLV8, GLXP-DIMFLV8 100% - 0.1% / 1% Crestron Green Light GLPAC-DIMFLV4-, GLPAC-DIMFLV8100% - 0.1% / 1% DIML6A, 6B 0-10V (-) Crestron Green Light Power Pack GLPP-DIMFLVEX-PM, GLPP-1DIMFLV2EX-PM, GLPP-1DIMFLV3EX-PM 100% - 0.1% /FIXTURE 1% 0-10V DIMMING W/RELAY TO GRAY SWITCH POWER 0-10V (+) PURPLE DIMMER: 0-10V Crestron DIN Rail Analog Output Module DIN-A08 100% - 0.1% / 1% V+ RED SWITCHED HOT BLACK Crestron DIN Rail 0-10V Fluorescent Dimmer DIN-4DIMFLV4 100% - 0.1% / 1% LEDV- BLACK NEUTRAL WHITE GREEN Crestron iLux 0-10V Dimmer Expansion Module CLS-EXP-DIMFLV 100% - 0.1% / 1% DRIVER GND * NOTE: Refer to dimmer manufacturer's documentation for installation instructions andCLASS circuit details. 2 CONTROL WIRES (BY OTHERS) LINE DIMMING DRIVER WIRING SCHEMES: RELAY (BY OTHERS) NOTES: NEUTRAL Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. DIML6 0-10V DIMMING (NO RELAY) DIML6 0-10V DIMMING W/RELAY TO SWITCH POWER FIXTURE (BY OTHERS) 0-10V (-) GRAY 0-10V (+) PURPLE SWITCHED HOT BLACK NEUTRAL WHITE (BY OTHERS) LED DRIVER V+ RED V- BLACK LINE GREEN GROUND GND 0-10V (-) GRAY 0-10V (+) PURPLE SWITCHED HOT BLACK NEUTRAL WHITE LED DRIVER V+ RED V- BLACK GREEN GND CLASS 2 CONTROL WIRES LINE FIXTURE DIMMER: 0-10V w/ POWER SWITCHING DIMMER: 0-10V RELAY (BY OTHERS) NEUTRAL NEUTRAL USAI Lighting ® www.usailighting.com DIML6A, 6B info@usailighting.com 1126 River Road New Windsor, NY 12553 0-10V DIMMING (NO RELAY) DIMMER: 0-10V w/ POWER SWITCHING (BY OTHERS) FIXTURE T 845–565–8500 F 845–561–1130 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-6 Revised 05/20/2016 DIMMING DRIVER COMPATIBILITY SELECTION GUIDE DIML7 ® USAI Lighting DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). DIML7 LED: EldoLED DALI Dimming Driver Wiring (Dims down to 0.1%) DIML7 DALI CONTROLS DALI BUS DA DA FIXTURE WALL CONTROL (BY OTHERS) LINE NEUTRAL LED ORANGE (-) ORANGE/WHITE (+) BLACK WHITE GREEN DRIVER V+ RED V- BLACK GND USAI Lighting ® www.usailighting.com info@usailighting.com 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-7 Revised 02/15/2016 DIMMING DRIVER COMPATIBILITY SELECTION GUIDE DIML9 ® USAI Lighting DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). DIML9 LED: TRIAC Forward Phase Dimming Driver Wiring (Dims down to 15%) 120V Only DIML9 2 WIRE PHASE DIMMING FIXTURE DIMMER: 2 WIRE PHASE (BY OTHERS) LED LINE SWITCHED HOT NEUTRAL GROUND BLACK WHITE DRIVER V+ RED V- BLACK GREEN GND ONLY FOR SWITCHES WITH NEUTRAL NEUTRAL USAI Lighting ® www.usailighting.com info@usailighting.com 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-9 Revised 02/15/2016 DIMMING DRIVER COMPATIBILITY SELECTION GUIDE DIML19 ® USAI Lighting DIMMING DRIVER WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). DIML19 LED: Hatch XTC series or equivalent - Forward and Reverse Phase Dimming Driver. Dims down to 1% contingent upon dimmer specification and load. 120V only. DIML19 2 WIRE PHASE DIMMING FIXTURE DIMMER: 2 WIRE PHASE (BY OTHERS) LED LINE SWITCHED HOT NEUTRAL GROUND BLACK DRIVER WHITE V+ RED V- BLACK GREEN GND ONLY FOR SWITCHES WITH NEUTRAL NEUTRAL DIML19 Dimmer Compatibility Chart 120V ONLY Forward Phase / TRIAC Dimming Manufacturer Product Qty Fixtures Per Dimmer Leviton IPL06-10Z Use fixture wattage per 6613-xxx fixture specification Lutron S-600P sheet to determine S-603P number of fixtures DV-600P per dimmer. Max number DV-603P of fixtures is limited by DVSC-603P dimmer load rating. CT-600P CT-603P 120V ONLY Reverse Phase / ELV Dimming Manufacturer Product Leviton 6615 IPE04-xxx Lutron NTELV-300 NTELV-600 SELV-300P SELV-303P DVELV-300P DVELV-303P USAI Lighting ® www.usailighting.com info@usailighting.com Qty Fixtures Per Dimmer Use fixture wattage per fixture specification sheet to determine number of fixtures per dimmer. Max number of fixtures is limited by dimmer load rating. 1126 River Road New Windsor, NY 12553 T 845–565–8500 F 845–561–1130 © 2016. USAI, LLC. All rights reserved. All designs protected by copyright. I2-264-19 Revised 07/29/2016