MANDATORY DISCLOSURE I. NAME OF THE INSTITUTION : Bonam Venkata Chalamayya Engineering College ¾ Address including telephone, Fax, e‐mail. Address :‐ B.V.C. Engineering College Odalarevu – 533 210 Allavaram (Mandal) East Godavari (Dist.) Andhra Pradesh. Telephone No. : 08856 – 250145, 250245 & 250345 Fax No. : 08856 – 250881 e‐mail ID : bvcec@hotmail.com rmy_bvcecodr@sancharnet.in II. NAME & ADDRESS OF THE PRINCIPAL : Dr. G.M.V. Prasad B.V.C. Engineering College Odalarevu – 533 210 Allavaram (Mandal) East Godavari (Dist.) ¾ Address including telephone, Fax, e‐mail. Address :‐ Dr. G.M.V. Prasad Principal B.V.C. Engineering College Odalarevu – 533 210 Allavaram (Mandal) East Godavari (Dist.) Telephone No. : 08856 – 250825 (Off) 08856 – 238687 (Res) 9392522444 (Mobile) Fax No. : 08856 – 250881 e‐mail ID : profprasadgmv@yahoo.co.in ‐ 1 ‐ ‐ 2 ‐ III. NAME OF THE AFFILIATING UNIVERSITY : J.N.T. University Kakinada, East Godavari District, Andhra Pradesh. IV. GOVERNANCE ™ Members of the Board and their brief background Name : B. Satyavathi Designation : Vice President Father / Husband Name : (Late) B.V. Chalamayya Educational Qualifications : School Studies Experience Landlord : : B. Kanakayya Designation : Secretary Father’s : (Late) B.V. Chalamayya Educational Qualifications : School Studies Experience Industrialist Name : : B. Gopala Krishna Designation : Member Father’s Name : B. Subba Rao Educational Qualifications : B.Com Experience Industrialist Name : : Dr. Metla Venkata Suryanarayana : Member Father’s Name : M. Rama Murthy : Name Designation Educational Qualifications B.Sc., M.B.B.S. ‐ 3 ‐ Experience Saraswathi : Working as ‘Physician & Surgeon’ in Nursing Home, Mobarlipeta, Amalapuram. ‐ 4 ‐ Name : Dr. Y.V. Narasimha Rao Designation : Member Father’s Name : Y. Gopala Rao Educational Qualifications : Ph.D., FIE, FIV Experience : Retired Additional General Manager, Steel Plant, Visakhapatnam. Name : M. Tulasi Rao Designation : Member Father’s Name : (Late) M. Venkata Raidu Educational Qualifications : B.A. Experience : Retired Assistant Secretary, A.P. College Service Commission, Hyderabad. Name : Dr. E.V.S. Prasad : Principal Educational Qualifications : M.Tech., Ph.D. Experience : Working as Principal, JNTU College of Designation Engineering, Kakinada. Name : Dr. G.M.V. Prasad Designation : Member Father’s Name : G. Chakraiah : B.E, M.Tech.,Ph.D., : Principal, Educational Qualifications Experience B.V.C. Engineering College, Odalarevu. ‐ 5 ‐ ‐ 6 ‐ ™ Members of Academic Advisory Body 1. Dr. K.N.V. Prasada Rao ‐ Retired Professor from Sri Venkateswara University. 2. Dr. G.S.N. Raju ‐ Department of ECE, AU, Waltair, Visakhapatnam 3. Dr. S.S. Tulasiram ‐ Professor & Head, Department of EEE, Kakinada Professor & Chairman (BOS), 4. Ch. S.S.V. Rajasekhar ‐ Sr. Software Engineer,SASKEN Communications,Bangalore 5. S. Ravi Kumar ‐ Software Engineer, GE, Hyderabad. JNTU, ™ Frequency of the Board Meetings and Academic Advisory Body : Once in a year ™ Organizational chart and processes : ‐ 7 ‐ ™ Nature and Extent of involvement of faculty and students in academic affairs/improvements Department Associations :‐ Each department has its own student’s professional association for conducting seminars, guest lectures, group‐discussions etc. for providing opportunities to the students so as to develop their overall personality before they complete the four year B.Tech. Course. The pre‐final students are encouraged to go on an industrial tour covering different parts of the country to secure the practical knowledge about the various industrial processes. Staff Advisory System for counseling & guidance :‐ Each staff member is assigned 30 students of the concerned class / lab which he is teaching in the current semester in the role of staff advisor so that he can advice / counsel the student personally related to the students academic and nonacademic problems. The system of staff advisor is effectively running in the institution for the past three academic years where personal counseling and guidance to the students is taken care. Various Committees were constituted comprising of faculty & students for smooth functioning of institution :‐. I) TIME‐TABLE INCHARGES :‐ Time Table Committee Coordinator – Mr. G.B. Chandramouli Member Incharge for EEE Department : Mr. S. Srikanth Member Incharge for Mechanical Department : Mr. S. Venkateswara Rao Member Incharge for ECE Department : Mr. B.V.V. Satyanarayana Member Incharge for CSE Department : Mr. B.P.N. Madhu Kumar Member Incharge for IT Department : Ms. K. Srilatha II) a) CLASS INCHARGES :‐ ‐ 8 ‐ Departme
Class Class Incharge II B.Tech Mr. B. Vijay Kumar III B.Tech Mr. B. Srinivasa Rao nt EEE IV ME Mr. S. Srikanth II B.Tech Mr. B. Srinivas III B.Tech Mr. D. Santha Rao IV ECE B.Tech B.Tech Mr. Murthy Y.V. Ramana II B.Tech – A Mr. A. Pravin II B.Tech – B Mr. S. Koteswara Rao III B.Tech – A Mr. K. Raja Sekhar III B.Tech – B Mrs. T. Neelima IV B.Tech Ms. Ch. Sri Devi IV B.Tech Mr. E. Nageswara Rao ‐ A ‐ B CSE II B.Tech – A Mr. V.S. Rama Krishna II B.Tech – B Ms. K. Sumathi Devi III B.Tech – A Mr. R.V. Satyanarayana III B.Tech – B Mr. N. Krishnaiah IV B.Tech Mr. T.V. Sai Krishna IV B.Tech ‐ A ‐ B IT Mr. Kumar B.P.N. Madhu II B.Tech Dr. R. John Mathew III B.Tech Mr. M. Prasad IV B.Tech ‐ 9 ‐ Mr. T. Srinivasa Rao b) CLASS REPRESENTATIVES :‐ Dept. Class Class Representative Regd. No. II Year Mr. Shaik Abbas 07221A0244 III Year Mr. S. Jaya Deep 06221A0221 IV Year Mr. N. Vasantha Kumar 05221A0225 II Year Mr. N. Nani 07221A0331 EEE III Year ME Mr. Ch. Venkateswara Rao IV Year Mr. V. Sandeep 05221A0340 Mr. Anvesh Koripalli 07221A0455 II Year – A VM 06221A0314 07221A0401 Ms. A.S.K. Manju II Year – B ECE Mr.CH.D.S.Murthy Gunda 07221A0469 07221A04B4 Ms. V. Pallavi III Year – A III Year – B IV Year – A Mr. Kedarinath 06221A0447 Ms. Sirisha 06221A0403 Mr. Satish Kumar Ch 06221A0457 Ms. S. Priyanka Naidu 06221A0468 Mr. Ch. Vijaya Krishna 05221A0407 Ms. S.V.S. Madhulika 05221A0452 Mr. B. Santosh Kumar 05221A0477 IV Year – B Ms. Lakshmiamala M.V. Mr. Rama Raju II Year ‐ A Ms. P. ‐ 10 ‐ 05221A0490 07221A0508 Mahathi 07221A0527 Subhadra II Year ‐ B CSE III Year ‐ A III Year ‐ B
IV Year ‐ A IV Year ‐ B II Year IT III Year IV Year Mr. V. Anil Kumar 07221A0589 Ms. S. Pushpa Sindhu 07221A05A0
Mr. G. Appala naidu 06221A0502 Ms. B.V.N. Sowmya 06221A0527 Mr. P. Siva Prakash 06221A0573 Ms. K. Sunitha 06221A0579 Mr. P. Praveen Kumar 05221A0530 Ms. Sri Lakshmi 05221A0547 Mr. P.V. Sai Rama Rao 05221A0555 Mr. P. Srinivas 05221A0557 Ms. P. Anusha 07221A1203 Mr. Jaya Ram Guttula 07221A1215 Mr. R. Venkata Harish 06221A1258 Mr. Mobin Fatema Syed 06221A1232 Ms. M. Sailaja 05221A1224 Mr. M. Nageswara Rao 05221A1231 ‐ 11 ‐ III) LAB INCHARGES :‐ Dept. EEE Lab Incharge Lab Technician Control Systems Lab Mr. S. Srikanth Mr. R. Subba Raju Power Electronics Lab Mr. S. Srikanth Mr. R. Subba Raju ELE Circuits Mr. B. Vijay Kumar Mr. R. Subba Raju ELE Simulation Mr. A. Hari Babu Mr. R. Subba Raju Measurement Lab Mr. M. Srinivasa Rao Mr. V. Pattabih Ramayya
Machines Lab Mr. G.O. Padma Raju MECH Basic Workshop Lab Mr. S. Venkateswara Rao Mr. S. Srirama Murthy Mr. K. Appa Rao Basic Workshop Lab (EEE) Mr. T.N. Kalki Babu & Mr. D. Raja Gopal Fuels & Lubricants Lab Mr. A. Rama Krishna Mr. S. Srirama Murthy Thermal Engineering Lab Prof. GVNSR Ratnakara Rao Mr. K. Appa Rao FM & HM Lab Dr. D.S.V. Prasad Mr. K. Appa Rao FM & HM Lab Mr. S. Srirama Murthy Heat Transfer Lab Prof. A. Rama Krishna Mr. P. Jeevan Kumar Metrology Lab Mr. Y.V. Ramana Murthy Mr. T.N. Kalki Babu Machine Tools Lab Mr. D. Santha Rao Mr. K. Appa Rao Metallurgy Lab Mr. B. Srinivas Mr. P. Jeevan Kumar CAD/CAM & Mr. Y.V. Ramana Murthy Mr. D. Raja Gopal Mr. D. Santha Rao Mr. P. Jeevan Kumar & Mechatronics Lab PT Lab Mr. T.N. Kalki Babu ‐ 12 ‐ MOS Lab Mr. G. Narasa Raju Instrumentation Lab Mr. B. Srinivas Mr. T.N. Kalki Babu ECE MP/MC Lab Mr. V. Dhana Raj Mr. B.V. Chalamayya EDC Lab Mr. S. Koteswara Rao Mr. J. Anjaneyulu ECA/ECAD/DSP Lab Mr. K. Raja Sekhar Mr. P. Srinivas AC/DC/MWOC Lab Mr. A. Pravin Mr. N.S.N.L.P. Raju LICA/PDC Lab Mr. E. Nageswara Rao Mr. A. Srinivasa Rao CSE / IT Lab – 1 Mr. R.V. Satyanarayana Mr. Narasimha Rao Lab – 2 Mr. T.V. Sai Krishna Mr. Narasimha Rao Lab – 3 Mr. N. Krishnaiah Mr. K. Venkatesh Lab – 4 Mr. V.S. Rama Krishna Ms. B. Neelima Devi Project / Internet Ms. K. Sumathi Devi Mr. S. Hanumanth C & DS Mr. P. Suresh Babu & Ms. Swaraj Laxmi Mr. T. Srinivasa Rao ITWS Mr. B.P.N. Madhu Kumar Online Lab Mr. P.B.V. Raja Rao Mr. A.S. Ravi Shankar IV) ELECTRONIC DATA PROCESSING CELL :‐ Attendance, Marks, Progress Reports, Bio‐data and other Students Information. Electronic Data Processing Cell Coordinator – Mr. S.A. Sattar Members :‐ Mr. J. Satish Babu, EEE Mr. S. Venkateswara Rao, ME Mr. B.V.V. Satyanarayana, ECE ‐ 13 ‐ Mr. B.P.N. Madhu Kumar, CSE Ms. K. Srilatha, Mr. N. Phani Kumar, IT S&H Tech. : Mr. P.S.R.Ch. Murthy Naidu Mr. S. Sanjeevi Mr. K. Venkatesh (CSE) V) ENTERPRENEUR DEVELOPMENT CELL TRAINING & PLACEMENT CELL Co‐ordinator :‐ Prof. GVNSR Ratnakara Rao Members :‐ Mr. S. Srikanth Mr. K. Ravi Babu, ECE Mr. B. Srinivas, MECH Mr. V.S. Rama Krishna CSE & IT Mr. K. Ramesh Babu S & H EEE VI) EXAMINATION SECTION :‐ Conducting University Exams, Online Exams, Internal Exams, University Results Analysis, Monitoring the performance of the students etc. Officer Incharge : Prof. T.V. Janardhana Rao Coordinators : Mr. A. Pravin & Mr. S. Abdul Sattar On‐line Exams : Co‐ordinators‐ ‐ 14 ‐ Prof. G. Jena Internal Exams : Coordinators : Mr. M. Srinivasa Rao, EEE Mr. G. Narasa Raju, ME Mr. E. Nageswara Rao, ECE Mr. T.V. Sai Krishna, CSE Dr. R. John Mathew, IT Mr. S. Tatayya Naidu, S&H Mr. P.B.V. Raja Rao Mr. B.S.N. Murthy ‐ 15 ‐ VII) GENERAL UTILITIES :‐ Co‐ordinator :‐ Members :‐ Mr. B. Durga Prasad, OFFICE Mr. K. Appa Rao, ME Mr. D. Santha Rao, MECH 1)
2)
3)
4)
Maintenance :‐ PAS ‐ Mr. P. Srinivas (ECE) & Mr. SVD. Hanumanth (CSE) EPABX ‐ Mr. B.V. Chalamaiah & Mr. A. Srinivas (ECE) LCD ‐ Mr. P. Jeevan Kumar & Mr. R. Subba Raju ELECTRIC POWER SUPPLY / ‐ Mr. K.V. Ramana & Mr. N. Narayana Rao GENERATOR 5) UPS & BATTERIES 6) FURNITURE, FANS Etc. ‐ Mr. V. Pattabhiramayya & Mr. D. Suryanarayana ‐ Mr. K. Trinadhulu & Mr. S. Satti Srirama Murthy VIII) INTERNET &CAMPUS COMPUTER NETWORK MAINTENANCE COMMITTEE :‐ Coordinator :‐ Mr. K. Srinivas System Manager :‐ Mr. R.V. Satyanarayana Technicians : Mr. P.S.R.Ch.M. Naidu Mr. Ch. Tatayya Naidu & Mr. Ravi Shankar Student Members : 1. Mr. D. Avinash, 07 ‐ 1205 2. Mr. T. Harish, 3. Mr. M.V. Harish, 06 ‐ 1231 4. Ms. M. Manasa Nagagowri P, 5. Mr. A.V.N. Rao, ‐ 16 ‐ 07 ‐ 1214 05 ‐ 1202 06 ‐ 1229 6. Mr. Hymayahanta, 05 – 1213 ‐ 17 ‐ IX) CIVIL WORKS & CAMPUS MAINTENANCE COMMITTEE :‐ Convenor :‐ Dr. D.S.V. Prasad Coordinators :‐ (i) Gardening : Coordinators ‐ Mr. M. Akhil Kumar Mr. D. Suryanarayana Helper ‐ Mr. K. Sridhar Mr. P. Srinivasa Rao (PD) (ii) Drinking Water Supply& Cleaning of Water Tanks :‐ Supervisor : Mr. N. Narayana Rao (iii) Cleaning of Campus / Class Rooms / Laboratories :‐ Supervisor : Mr. A. Nageswara Rao, Senior Assistant Members : All Sweepers (v) Civil Works :‐ Mr. Sivannarayana (vi) College Main Stores :‐ Mr. B. Durga Prasad (vii) Manpower Management :‐ – Mr. B. Narayana Rao & Mr. B. Durga Prasad ‐ 18 ‐ X) MESS & CANTEEN :‐ Convenor : Prof. J.V.G. Rama Rao Members : Mr. K. Srinivas (IT) Student Members : 1) Mr. P. Raja Phanindra, 06 ‐ 343 2) Ms. N. Sindhura, 05 ‐ 1247 3) Ms. S. Priyanka Naidu, 06 ‐ 468 4) Mr. G. Siva Rama Krishna, 05 ‐ 446 5) Ms. T. Mahduri, 06 ‐ 252 6) Mr. S.U.M. Muma Maheswari, 06 – 546 7) Mr. K. Daniel Raj, 07 ‐ 520 Mr. B.V. Chalamayya XI) HOSTEL COMMITTEE :‐ Chief Warden : Principal Boys Hostel : Warden : Asst. Wardens : Mr. N. Satyanarayana Murthy Mr.VVV. Satyanarayana Members : All Resident Staff Members Ladies Hostel : Warden : Ms. K. Sumathi Devi Asst. Wardens : Mrs. A. Mukunda Bai Mrs. P. Srinivasa Lakshmi Dr. D.S.V. Prasad ‐ 19 ‐ Members Mrs. S. Vijaya Laxmi : All Resident Staff XII) LIBRARY COMMITTEE :‐ Coordinator :‐ Mr. B. Srinivas Members :‐ EEE ‐ Mr. M. Srinivasa Rao ECE ‐ Mr. S. Koteswara Rao CSE Mr. V.S. Rama Krishna IT S & H ‐ Mr. S. Tatayya Naidu XIII) TRANSPORT COMMITTEE :‐ Coordinators :‐ Mr. B.H.S. Raju & Mr. B.P.N. Madhu Kumar Members :‐ 1) Mr. Ch. V. Siva Rao 2) T.N. Kalki Babu 3) Mr. A. Nageswara Rao, Sr. Asst. XIV) (A) DISCIPLINARY COMMITTEE & ANTI‐RAGGING COMMITTEE:‐ All HODs, Office Superintendent, Physical Director, Librarian & Wardens. (B)
COLLEGE ACADEMIC COMMITTEE :‐ All HODs. ‐ 20 ‐ XV) CO‐ CURRICULAR ACTIVITIES :‐ Seminars, Workshops, Technical Paper Contests / Quizzes, Short‐term Courses etc. Co‐ordinators :‐ Prof. G. Jena & Prof. J.V.G. Rama Rao Members :‐ Mr. J. Satish Babu Mr. Y.V. Ramana Murthy Mr. S.V.S.N. Murthy Mr. G. Narasa Raju Mr. N. Krishnaiah Mr. T. Srinivasa Rao XVI) EXTRA CURRICULAR:‐ Cultural Festivals, Functions, Celebrations, Sports & Games, NSS & NCC and other activities. Co‐ordinators :‐ Mr. S. Rama Krishna, S&H Mr. P. Srinivasa Rao, P.D. Members :‐ Mr. A. Rama Krishna Mr. Y.V. Ramana Murthy Mr. S.V.S.N. Murthy Mr. N. Krishnaiah Mr. T. Srinivasa Rao XVII) STAFF ACTIVITIES :‐ ‐ 21 ‐ Co‐ordinators :‐ Members :‐ Mr. M. Srinivasa Rao Mr. Y.V. Ramana Murthy Dr. N.S.M. Sharma Mr. P. Suresh Babu Mr. B.S.N. Murthy ‐ 22 ‐ XVIII) STUDENTS CO‐OPERATIVE STORES :‐ Coordinator :‐ Mr. A. Rama Krishna Members :‐ Mr. S. Koteswara Rao Mr. T.V. Sai Krishna Mr. A. Nageswara Rao, Sr. Assistant XIX) AICTE / JNTU INSPECTION COMMITTEE REPORTS :‐ Prof. T.V. Janardhana Rao Prof. J.V.G. Rama Rao Mr. A.Y.R.V. Prasad Mr. P.S.R.Ch. Murthy Naidu XX) INDUSTRIAL TOURS / VISITS & INDUSTRIAL TRAINING ETC. :‐ Mr. J. Satish Babu, EEE Mr. G. Venkateswara Rao, ME Mr. Ch. Raja Sekhar, ECE Mr. P. Suresh Babu, CSE XXI) STUDENTS’ GRIEVENCES REDRESSAL CELL :‐ Class Representatives, Class Incharges & Wardens ‐ 23 ‐ XXII) STAFF GRIEVENCES REDRESSAL CELL :‐ All HODs. ‐ 24 ‐ XXIII) PROFESSIONAL BODIES :‐ ISTE ‐ Mr. Y.V. Ramana Murthy IEEE ‐ Prof. J.V.G. Rama Rao IETE ‐ Mr. V. Dhana Raj CSI Mr. K. Srinivas ‐ XXVI) RESEARCH FORUM :‐ Coordinator :‐ Prof. G. Jena Dr. R. John Mathew Dr. Murthy Sharma :‐ All HODs. Members XXV) PRESS & PUBLICITY :‐ Coordinator :‐ Prof. G.V.N.S.R. Ratnakara Rao Prof. T.V. Janardhana Rao Members :‐ Mr. P. Srinivasa Rao Mr. S. Rama Krishna Mr. A.Y.R.V. Prasad XXVI) PURCHASE COMMITTEE :‐ Hon’ble Secretary Principal Mr. B.V. Rajesh ‐ 25 ‐ HOD & Lab Incharge concerned. XXVII) CONSTRUCTION COMMITTEE :‐ Hon’ble Secretary Principal Mr. B.V. Rajesh Dr. D.S.V. Prasad XXVIII) STAFF SELECTION / RECRUITMENT COMMITTEE :‐ Hon’ble Secretary Principal HOD concerned. XXIX) SCHOLARSHIPS MONITORING CELL Mr. V.S. Rama Krishna, Associate Professor (CSE) … Coordinator Mr. B. H.S. Raju, Associate Professor (S&H) … Member Mr. K. Raja Sekhar, Asst. Professor (ECE) … Member Mr. K. Srinivas, Senior Assistant … Member ™ Mechanism/Norms & Procedure for democratic/good Governance Major decisions like budget allotment, building construction, laboratory requirement etc., will be taken by the governing body well in advance of the commencement of academic year. Quotations will be called for the necessary equipment / items and the negotiations will be made with different vendors by the purchase committee and the orders will be placed by Secretary & Correspondent on a suitable firm. ‐ 26 ‐ College Academic Committee is formed comprising of all HODs which will frame necessary guidelines by taking the suggestions from college academic advisory body and senior staff members of this institution. Various Committees (as specified in the above item) are constituted for democratic good governance. ‐ 27 ‐ ™ Student Feedback on Institutional Governance/faculty performance : Feedback from the students on institutional governance faculty performance will be taken at the end of every semester / academic year in a prescribed proforma suggested by Technical Teacher Training Institute (TTTI). The faculty members will be advised to take necessary steps to improve their performance. B V C ENGINEERING COLLEGE ODALAREVU – 533 210 STUDENT FEEDBACK FORM NAME OF THE STUDENT : ROLL NO. SEMESTER : I / BRANCH : II / III / IV _____ 1. This form is to evaluate your teacher. Please read the evaluation criteria carefully. 2. Rate your Teacher by marking a ‘√‘ in the appropriate box that very nearly indicates the performance of your Teacher. 3. While rating, you should be honest and truthful. 4. The Feedback given by you will be kept confidential. NAME OF THE TEACHER : SUBJECT : 1. He / She is able to explain the concepts in clear and simple language. Goo
Very Good d Averag
e ‐ 28 ‐ Not Satisfactory 2. He / She presents relevant examples, pictures, models etc., of the subject. Goo
Very Good d Averag
e Not Satisfactory Not Satisfactory Not Satisfactory 3. He / She uses effectively the board, OHP, LCD etc. Goo
Very Good d Averag
e 4. His / Her audibility while giving the lecture is Goo
Very Good d Averag
e 5. His / Her conduct and enthusiasm in the class in terms of eye contact, voice modulation, mannerisms etc., is Goo
Very Good d Averag
e Not Satisfactory 6. His / Her interaction with the class is (asking and allowing questions to be asked, and clarifying doubts). Goo
Very Good d Averag
e Not Satisfactory Not Satisfactory 7. His / Her coverage of syllabus Goo
Very Good d Averag
e 8. He / She Controls and maintains class discipline during his / her class. Always Generall
‐ 29 ‐ Generall
Always Controls y Controls y Indifferent Indifferent 9. His / Her punctuality to the class. Always on time Ofte
n on time Rarely on time Never on time 10. The quality of assignments, if given Goo
Very Good d Averag
e Not Satisfactory 11. Fairness in awarding marks Always Fair Often Fair Rarely Fair Never Fair 12. He / She discusses and analyzes the question paper and answer sheets in the class Goo
Very Good d Averag
e Not Satisfactory 13. Does your teacher keep you engaged fully during the period Sometime
Always s Often Never 14. Your overall impression of the teacher Goo
Very Good d Averag
e 15. Any other observations / useful comments : (to improve the quality of teaching) ‐ 30 ‐ Not Satisfactory LITTLE INFORMATION ABOUT YOU :‐ 16. Your attendance status :Less than 70 % 70 % ‐ 80 % 80 % ‐ 100 % 17. Your academic performance : I Year ‐ EAMCET Rank : ________ II Year ‐ % of marks obtained in III Year ‐ % of marks obtained up to II Year : ________ IV Year ‐ % of marks obtained up to I Year : ________ III Year :________ No. of Backlogs, if any : ______________ SIGNATURE OF THE STUDENT ™ Grievance redressal mechanism for faculty, staff and students :‐ Grievance redressal mechanism for faculty, staff : Faculty / Staff meetings will be frequently conducted to discuss various issues. The staff members are given enough freedom to express their views / problems. The Management / Administration is always available to the staff members to attend their grievances. The Grievance redressal cell comprising of – 1) Principal … Convenor 2) HOD’s Members … Grievance redressal mechanism for students : A separate box is kept near the office to receive the complaint / grievances from students. The grievances are attended on a daily basis and necessary step to be taken will be recommended by the redressal cell. The Grievance redressal cell comprising of – ‐ 31 ‐ 1. Principal 2. HOD Concerned 3.Class in‐charge concerned 4. Class representative concerned ‐ 32 ‐ V. PROGRAMMES ™ Name of the Programmes approved by the AICTE : B.Tech ™ Name of the Programmes accredited by the AICTE : N.A. ™ For each Programme the following details are to be given: Name No. Duratio
Cut off mark/rank for of n Admission during the Seat
Last three years s B.Tech EEE B.Tech MECH B.Tech ECE B.Tech CSE B.Tech IT 2006‐2007 2007‐2008 Fee (Rs.) 2008‐2009 60 4 years 94399 117157 30200 60 4 years 98478 120971 30200 120 4 years 90042 54567 Admissions 30200 are in progress 120 4 years 98553 62423 30200 60 4 years 98070 69618 30200 ‐ 33 ‐ Placemen
t Facilities Placemen
t cell under a qualified placemen
t officer is working Campus Placement In last three Years with Minimum salary, maximum salary and average salary Min: Rs.12,000/‐ Max: Rs.40,000/‐ VI.
FACULTY
™ Branch wise list faculty members: • Permanent Faculty • Visiting Faculty • Adjunct Faculty • Guest Faculty • Permanent Faculty: Student Ratio MD ENCLOSURE ‐ I ™ Number of faculty employed and left during the last three years Number of faculty employed since last three years 80 Number of faculty left during last three years 51 VII. PROFILE OF DIRECTOR/PRINCIPAL WITH QUALIFICATIONS, TOTAL EXPERIENCE, AGE AND DURATION OF EMPLOYMENT AT THE INSTITUTE CONCERNED MD ENCLOSURE - II
VIII. FEE
™ Details of fee, as approved by State fee Committee, for the Institution. Convenor Seat : Rs.30,200/‐ per academic year Management Seat : Up to a maximum of Rs.91,700/‐ per academic year ™ Time schedule for payment of fee for the entire programme. Fifteen days from the commencement of the class work in every academic year ™ No. of Fee waivers granted with amount and name of students. Nil ™ Number of scholarship offered by the institute, duration and amount Nil ™ Criteria for fee waivers/scholarship. Economically Poor and high percentile in 10 + 2 recommended by Charitable Trusts / Orphan Homes. ™ Estimated cost of Boarding and Lodging in Hostels. Approximately Rs.16,000/‐ per academic year ‐ 34 ‐ IX. ADMISSION ™ Number of seats sanctioned with the year of approval. Year of approval S.No : 2008‐2009 Course Approved Intake 1 Electrical & Electronics Engineering 60 2 Mechanical Engineering 60 3 Electronics and Communication Engineering 120 4 Computer Science and Engineering 120 5 Information Technology 60 Total 420 ™ Number of students admitted under various categories each year in the last three years. Various Categories: Year OC BC SC ST TOTAL 2006‐2007 217 105 38 01 361 2007‐2008 226 140 55 00 421 2008‐2009 Admission are in progress ™ Number of applications received during last two years for admission under Management Quota and number admitted. Applications received : 2007‐2008 – 84 2008‐2009 – Admissions are in progress ‐ 35 ‐ No. of students admitted : 2007‐2008 ‐ 84 2008‐2009 ‐ Admissions are in progress X. ADMISSION PROCEDURE ™ Mention the admission test being followed, name and address of the Test Agency and its URL (website). Convenor, EAMCET, Sankethika Vidya Bhavan, Masab Tank, Hyderabad, A.P. Website : http://eamcet.dte.gov.in ‐ 36 ‐ ™ Number of seats allotted to different Test Qualified candidates separately [AIEEE/CET (State conducted test/University tests)/Association conducted test] EAMCET : EEE = 45 ; ME = 45 ; ECE = 90 ; CSE = 90 ; IT = 45 ™ Calendar for admission against management/vacant seats: •
•
•
•
•
•
•
•
•
As per the date given by APSCHE (Andhra Pradesh State Council for Higher Education), Masab Tank, Hyderabad Last date for request for applications. : As per the norms of Convenor, EAMCET Last date for submission of application. : As per the norms of Convenor, EAMCET Dates for announcing final results. : As per the norms of Convenor, EAMCET Release of admission list (main list and waiting list should be announced on the same day) : As per the norms of Convenor, EAMCET Date for acceptance by the candidate (time given should in no case be less than 15 days) : As per the norms of Convenor, EAMCET Last date for closing of admission. : As per the norms of Convenor, EAMCET Starting of the Academic session. : As per the norms of JNT University, Hyderabad. The waiting list should be activated only on the expiry of date of main list. : OK The policy of refund of the fee, in case of withdrawal, should be clearly notified. : As per the norms of Convenor, EAMCET ‐ 37 ‐ CRITERIA AND WEIGHTAGES FOR ADMISSION ™ Describe each criteria with its respective weightages i.e. Admission Test, marks in qualifying examination etc. For Convenor Seat : Qualified candidates in EAMCET Examination and allotment by Convenor, EAMCET For Management Seat : 10 + 2 pass with 50 % marks in aggregate or in group ™ Mention the minimum level of acceptance, if any. : No ™ Mention the cut‐off levels of percentage & percentile scores of the candidates in the admission test for the last three years. XI.
As per the norms of EAMCET Convenor. ™ Display marks scored in Test etc. and in aggregate for all candidates who were admitted. Displayed in college Main Notice Board XII. APPLICATION FORM ™ Downloadable application form, with online submission possibilities. ‐ 38 ‐ BONAM VENKATA CHALAMAYYA ENGINEERING COLLEGE
ODALAREVU-533210, Allavaram Mandal, E.G.Dt.,A.P.
APPLICATION FOR ADMISSION INTO I B.TECH. COURSE
UNDER MANAGEMENT QUOTA
Date: _______________
1. Name of the Candidate
:
(in block letters as per SSC records)
PHOTO
2. Name of the Father/Guardian
:
(as per SSC records)
3. Date of Birth
:
Day
Month
Year
(as per SSC records)
4. Address for communication
: _____________________________
_____________________________
_____________________________
Pin:__________________________
5. Phone No.______________ STD Code:_______________
Cell:______________________
6. Sex
: Male/Female
(strike off whichever is not applicable)
7. Local/Non-Local Status
:
8. Reservation Category
:
‐ 39 ‐ 9.Reservation under special category
:
(copy of the caste certificate issued
by the Revenue Authority)
10. Nationality
:
Religion:
11. Educational Qualifications:
a) Particulars of the qualifying examination
Board/Instit
ution
H.T.No.
:
Marks obtained in
Year of
Passing
Aggregate
Optionals
Percentage of Marks in
Division
Aggregate
Optionals
b) EAMCET Particulars
Hall Ticket No.
:
Rank
:
12. Details of parent
:
Occupation _______________ Designation ____________ Annual Income__________
(Office address with Phone No.)
13. Furnish the following details for the four/seven consecutive academic years ending
with the month and year mentioned in column 11 (a) above, Study/Bonafide Certificate from
Heads of Institution(s) should be enclosed as proof.
Academic
Year
Class in which
studied during the
year
Name and place of the
Institution in which studied
VI Class
VII Class
VIII Class
IX Class
X Class
Intermediate
(Junior/Senior)
‐ 40 ‐ Remarks
14. Identification Marks:(As per SSC record)
1.
2.
DECLARATION BY THE CANDIDATE
(i) I will affirm that I will not ask for any change of branch after my admission in the college
(ii) I declare that the statements made by me in this application are complete and correct.
I have not suppressed any information. I fully understand that my admission will stand
cancelled in case any information furnished by me is found to be false.
Date:______________
Signature of the candidate
DECLARATION TO BE SIGNED BY THE FATHER/GUARDIAN
I agree to the applicants’ admission to the B.Tech. course of the JNTU, Hyderabad. I shall be
responsible for the payments of all his/her fees and other charges. I shall be responsible for his/her
good behaviour during the period of his/her college career. I endorse that the information furnished
by my son/daughter is true to the best of my knowledge.
Date: _____________
Signature of the Father/Guardian
______________________________________________________________________
Admitted in _____________________________________
Principal.
‐ 41 ‐ XIII. List of Applicants ™ List of candidates whose applications have been received along with percentile/percentage score for each of the qualifying examination in separate categories for open seats. Admissions are in Progress XIV. RESULTS OF ADMISSION UNDER MANAGEMENT SEATS/VACANT SEATS ™ Composition of selection team for admission under Management Quota with the brief profiles of members (This information be made available in the public domain after the admission process is over) 1. Sri B. Kanakayya, Secretary & Correspondent 2. Sri B V Rajesh, Director 3. Principal ™ Score of the individual candidates admitted arranged in order of merit. Admissions are in Progress ™ List of candidates who have been offered admission. Admissions are in Progress ™ Waiting list of the candidates in order of merit to be operative from the last date of joining of the first list candidates. Admissions are in Progress ™ List of the candidates who joined within the date, vacancy position in each category before operation of waiting list. Admissions are in Progress ‐ 42 ‐ XV. INFORMATION ON INFRASTRUCTURE AND OTHER RESOURCES AVAILABLE LIBRARY: ¾ Number of Library books/Titles/Journals available (programme‐wise) Number of volumes S.No
Course(s)
Number of titles
of the books
General
Journals Book Bank
(SC&ST)
National International 1
EEE
350 2019 345 03 06 2
ME
562 2737 783 06 ‐‐ 3
ECE
615 4275 969 03 24 4
CSEIT
832 5145 1064 08 16 5
S&H
361 3922 705 01 ‐‐ 6
General
390 683 04 10 ‐‐ 3110 18781 3870 31 46 Total
22651
Grand Total
77
¾ List of online National/International Journals subscribed. EEE S.No Title Branch 1 The Institution of Engineers ( Electrical) EEE 2 Electrical Engineering Update EEE 3 Electrical India EEE Mech 1 The Institution of Engineers ( Mechanical) Mech 2 The Institution of Engineers ( Production) Mech 3 The Institution of Engineers ( Metallurgy & Material Sciences) Mech 4 Engineering Advances Mech 5 Auto India Mech 6 The Innovative – ACR – N – Coducive Mech ‐ 43 ‐ ‐ 44 ‐ ECE 1 The Institution of Engineers ( Electronics & Telecom) ECE 2 Lab Experiments ECE 3 Electronics for you ECE CSE 1 The Institution of Engineers ( Computer Science) CSE 2 P.C. Quest CSE 3 Information Technology CSE 4 Computer Viznanam CSE 5 C/C++ Users Journal ( Dr.Dobbs Journal CSE 6 Sys Admin ( The Journal for UNIX Systems Adminstration) CSE 7 Linux For You CSE 8 International Journal of Information Processing (IJIP) CSE General 1 Competition Success Review General 2 Employment News General 3 India Today General 4 The Week General 5 Out Look General 6 Sports Star General 7 Science Reporter General 8 Readers Digest General 9 Invention Intelligence General 10 Vijetha Competition General 11 IT Com General ‐ 45 ‐ List of International Periodicals of Electronics and Communication Engineering (ECE) S.N
o Name of the periodical Particular Frequency 1 IEEE Antennas and Propagation Magazine 6/Yr 2 IEEE Transactions on Antennas and Propagation Transaction 12/Yr 3 IEEE Transactions on Nanotechnology Transaction 6/Yr 4 IEEE Circuits and Systems Magazine 4/Yr 5 IEEE Transactions on Circuits and Systems Part‐I Transactions 12/Yr 6 IEEE Transactions on Circuits and Systems Part‐II Transactions 12/Yr 7 IEEE Communications Magazine 12/Yr 8 IEEE Transactions on communications Transactions 12/Yr 9 IEEE Wireless communications Magazine 6/Yr 10 IEEE Transactions on Mobile computing Transactions 12/Yr 11 IEEE/ACM Transactions on Networking Transactions 6/Yr 12 IEEE Transactions on Wireless communications Transactions 12/Yr 13 IEEE Transactions Electromagnetic Compatibility Transactions 4/Yr 14 IEEE Transactions on Electronic Devices Transactions 12/Yr 15 IEEE Transactions on Semiconductor Manufacturing Transactions 4/Yr 16 IEEE Engineering in Medicine and Biology Magazine 6/Yr 17 IEEE Industrial Electronics Magazine 4/Yr 18 IEEE Instrumentation and Measurement Magazine 6/Yr 19 IEEE Microwave Theory and Techniques Magazine 6/Yr Transactions 15/Yr 20 IEEE Transactions on Microwave Theory and Techniques 21 IEEE Signal Processing Magazine 6/Yr 22 IEEE Transactions on Signal Processing Transactions 12/Yr 23 IEEE Journal of Solid State circuits Journal 12/Yr ‐ 46 ‐ 24 IEEE Transactions on Very Large scale integration systems ‐ 47 ‐ Transactions 12/Yr List of International Periodicals of Electrical and Electronics Engineering (EEE) S.N
o Name of the periodical :Particular Frequenc
y 1 IEEE Control Systems Magazine 6/Yr 2 IEEE Transactions on Automatic control Transactions 12/Yr Transactions 6/yr 3 IEEE Transactions on Control Systems Technology 4 IEEE Dielectrics and Electrical Insulation Magazine 6/Yr 5 IEEE Transactions on Power Electronics Transactions 6/Yr 6 IEEE Transactions on Power Delivery Transactions 4/Yr List of International Periodicals of Computer Science Engineering (CSE) S.N
Name of the periodical :Particular o Frequenc
y 1 IEEE Computational Intelligence Magazine 4/Yr 2 IEEE computers Magazine 12/Yr 3 IEEE Transactions on computers Transaction
12/Yr s 4 IEEE Transactions on Dependable and secure computing s Transaction
4/Yr 5 IEEE Transactions on Knowledge and Data Engineering s Transaction
12/Yr 6 IEEE Transactions on Parallel and Distributed Systems s Transaction
12/Yr Transaction
6/Yr 7 IEEE Transactions on Software Engineering s 8 IEEE Computer Graphics and applications Magazine 6/Yr 9 IEEE Design&Test of Computers Magazine 6/Yr 10 IEEE Intelligence Systems Magazine 6/Yr 11 IEEE Micro Magazine 6/Yr ‐ 48 ‐ 12 IEEE Pervasive computing: Mobile and Ubiquitous systems Magazine 13 IEEE Security and Privacy Magazine 6/Yr 14 IEEE Software Magazine 6/Yr 15 IEEE Engineering in Medicine and Biology Magazine 6/Yr Transaction
4/Yr 16 IEEE/ACM Transactions on Computational Biology and Bioinformatics s E‐Library facilities: The institution is having digital library provided by SONET with 2Mbps leased line through BSNL. ‐ 49 ‐ LABORATORY: For each Laboratory ¾ List of Major Equipment/Facilities ELECTRICAL AND ELECTRONICS ENGINEERING DEPARTMENT
LIST OF EQUIPEMENT AVAILABLE IN ELECTRO MECHANICS LAB
S.
No.
1
DESCRIPTION
Dc shunt motor generator set duly coupled & mounted on sturdy
channel base frame supplied with DC starter,
QTY.
UNIT
PRICE
1 Set
----
38700.00
AMOUNT
Cap: 3.7 Kw|220V|1500RPM Make : BENN
2
Dc shunt motor. series generator set duly coupled and mounted
on sturdy channel base frame supplied with dc starter,
Cap:3.7KW/220V MAKE :BENN
1 Set
---
39240.00
3
Dc compound motor – compound generator set coupled and
mounted on a sturdy channel base frame supplied with
complete DC starter, Cap: 3.7 KW|220V|1500 RPM
MAKE:BENN
1 Set
---
38700.00
4
Dc shunt motor 3.7 kW supplied with complete mechanical
loading arrangement, consisting of Rod, Balance, and cast iron
drums, for heavy.duty smooth continuous use,
1 Set
---
24930.00
5
- do – as above but DC compound motor
1 Set
---
24930.00
6
Slipring induction motor 3 HP 3 Phase A.C
1 Set
---
29070.00
7
Squirrel Cage Induction Motor A.C
3 HP 3 Phase
1 Set
---
13500.00
8
D.C Shunt motor-3 Phase 400 V synchronous Motor coupled
with 7.5 HP DC Shunt motor
1 Set
---
47400.00
9
5KVA 50 Hz 3 Phase 400V Synchronous Motor coupled with
7.5 HP DC shunt Motor
1 Set
---
52000.00
10
D.C Shunt Motor: (Shunt Generator Set duly coupled and
1 Set
---
61000.00
1 Set
---
39100.00
Mounted on sturdy channel base frame supplied complete
With D.C, Starter, Rating 3P/5HP,
3.7KW/220V/1500Rpm(Generator)
5HP/220V/1500Rpm (Motor)
11
D.C Series Motor – Series Generator Set with 2.2KW Coupled
with Starter 2.2KW/220V/1500Rpm (Generator)
3HP/220V/1500Rpm (Motor) KIRLOSKAR
12
D.C Shunt Motor with Smooth Cylindrical Rotor alternator set
‐ 50 ‐ Capacity:5HP/220V (Motor),3KVA/3-Phase (Alternator) KIRL
13
14
1 Set
---
55000.00
3 Phase Auto transformer 415/470 V-15 A
2
13770.0
0
27540.00
Single Phase Auto transformer 0-270 V
4
2070.00
8280.00
Single Phase auto transformer 4KVA
2
5429.00
10858.00
Single Phase auto transformer 2KVA
3
3185.00
9555.00
1 KVA single Phase transformer 230/230 V /110 V
2
2900.00
5800.00
2 KVA single Phase transformer 230/115 V
3
5600.00
16800.00
2 KVA 230/115 V 50 HZ scott connected transformers
2
5600.00
11200.00
Single Phase Step Down Transformer 2KVA
1
5600.00
5600.00
0-1A/2A MC-DC
6
1130.00
6780.00
0-1/2A MC EIC MAKE
2
1250.00
2500.00
0-10A/20A MC-DC
8
1130.00
9040.00
5A/10A MC
1
550.00
550.00
2
1250.00
2500.00
10/20A
3
1300.00
3900.00
1/2A
3
1300.00
3900.00
10/20A
4
1050.00
4200.00
5A/10A MI
4
550.00
2200.00
10A/20A MI
4
550.00
2200.00
1A/2A MI
2
550.00
1100.00
2.5A/5A MI
8
1080.00
8640.00
5A/10A MI
4
1080.00
4320.00
10A/20A MI
4
1080.00
4320.00
0.5/1A
3
1448.00
4344.00
2
1035.00
2070.00
Transformers:
‘MECO’ Make Portable Ammeters MC
5A/10A MC EIC MAKE
15
16
‘MECO’ Make Portable Ammeters MI
‘VOLTMETERS’ MC
150/300V
‐ 51 ‐ 17
18
19
20
150/300V (Meco Make)
6
1350.00
8100.00
0-300/600V
4
1035.00
4140.00
0-300V
2
1035.00
2070.00
0-300V
2
550.00
1100.00
0-75/150V
4
600.00
2400.00
0-15/30V MC
3
1180.00
3540.00
0-2/50V Panel Type
1
950.00
950.00
15V/30V
3
1170.00
3510.00
0-150V/300V
9
1080.00
9720.00
0-300V/600V
6
550.00
3300.00
0-75V/150V
2
550.00
1100.00
0-300/600V
4
1448.00
5792.00
0-300/600V EIC MAKE
2
1085.00
2170.00
0-15/30V EIC MAKE
2
1085.00
2170.00
3000 RPM Digital
3
1800.00
5400.00
- do – but analog
2
4250.00
8500.00
Non-Contact Type Digital Tachometer 0-5000 rpm
2
5500.00
11000.00
LPF1/2A-150/300/600V
3
3800.00
11400.00
UPF 5/10A-75/150/300V
3
1750.00
5250.00
UPF 2.5/5A-75/150/300V
6
1750.00
10500.00
UPF5/10A-150/300/600V
2
2300.00
4600.00
UPF0-10/20A – 150/300/600V
2
1960.00
3920.00
LPF 5/10A-150/300/600V
5
4300.00
21500.00
LPF 10/20A-150/300/600V
6
4300.00
25800.00
LPF 0-1/2A – 75/150/300V
2
4100.00
8200.00
1
2100.00
2100.00
1
2200.00
2200.00
‘VOLTMETERS’ MI
‘TACHOMETERS’
‘WATTMETERS’
‘FREQUENCY METER’
Analog
21
‘TONG TESTER’
Digital
‐ 52 ‐ Analog
1
1250.00
1250.00
1
550.00
550.00
1
1400.00
1400.00
6
1800.00
10800.00
3
6800.00
20400.00
Rating 230V/5.0 kw
1
7500.00
7500.00
25
Single phase loading Resistor Rating 5 KW 20 A
1
9500.00
9500.00
26
‘RHEOSTATS’
6.8 Ohms 20 A
4
1800.00
7200.00
20 Ohms 8.5 A
4
1260.00
5040.00
500 Ohms 1.2 A
8
800.00
6400.00
1500 Ohms 1.2 A
4
1440.00
5760.00
250 Ohms 1A
5
550.00
2750.00
50 Ohms 5A
3
1300.00
3900.00
296Ohms 2.8A
2
800.00
1600.00
750 Ohms 1.2 A
4
1400.00
5600.00
200 Ohms 1.7 A
4
1300.00
5200.00
360 Ohms 1.2 A
6
900.00
5400.00
1000 Ohms 1.2 A
4
1900.00
7600.00
100 Ohms 5 A
2
3425.00
6850.00
18 Ohms 5 A
4
925.00
3700.00
25 Ohms 5A
1
1185.00
1185.00
500 Ohms 1.2A
2
1185.00
2370.00
50 Ohms 5A
3
3100.00
9300.00
Low voltage DC power supply 3 Phase continuous duty 0-50V
DC/50 A with fuses and MCB storage protection,
1
22500.0
0
22500.00
22
‘kWh METERS’
Single Phase 5/10A 230/250V
23
‘MULTI METERS’
Digital
31/2 Digit Hand Held Digital Model CIE-122
Make :
24
CIE
‘RESISTIVE LOAD
ING BANK 3 kW’
IN STEPS OF 0.5 kW single Phase
Single Phase Resistive Loading Bank
27
‐ 53 ‐ 28
Stabilised O/P continuously variable rectifier unit 100A 0-240
DC 25 kW, suitable for 3-phase I/O supply of 415V AC, Housed
in a wheel mounted powder coated sheet steel enclosure,
29
‘STOP WATCHES’
1
1,11,090
.00
111090.0
0
2
570.00
1140.00
SPST
1
180.00
180.00
DPST
1
240.00
240.00
1
3400.00
3400.00
1
2800.00
2800.00
1
2800.00
2800.00
(a) For loading
1
6300.00
6300.00
(b) For coupled set
1
6850.00
6850.00
2
2200.00
4400.00
Digital
30
31
‘SWITCHES’
DECADE INDUCTANCE BOX
Six dials 10 micro H to 11,1111H
32
D.C. STARTERS
a) 3-Point 220V D.C Hand Operated Starter
for 5 H.P D.C Motor
b) 3-Point 220V D.C Hand Operated Starter
for 7.5 H.P D.C Motor
33
PANEL BOARDS:
Individual Table Panel assembled with 4”X15”
slanting front, Front Hylam consists fuse, MCB
all duly wired internally and connected to the set
and starter
34
Loading Arrangement:
Loading arragement belt, spring balances+rounded handles
1085154.00
Total
‐ 54 ‐ ELECTRICAL AND ELECTRONICS ENGINEERING DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN POWER ELECTRONICS LAB
DESCRIPTION
S.No.
QTY.
UNIT
PRICE
AMOUNT
1
Characteristics of scr, mosfet, igbt trainer
2
7500.00
15000.00
2
Single phase ac half controlled converter
1
12250.00
12250.00
1
13175.00
13175.00
1
8000.00
8000.00
1
12545.00
12545.00
1
13500.00
13500.00
1
18400.00
18400.00
1
14250.00
14250.00
1
11200.00
11200.00
4
5375.00
21500.00
Trainer with scr firing circuit module and
r&rl load, rating:10A av/1200v
3
Single phase ac fully controlled
Converter power circuit trainer with scr
Firing circuit module and r&rl load
Rating : 10A av / 1200v
4
Forced commutation circuit trainer
With firing circuit
5
D.c jones chopper trainer with firing
Circuit and r&rl load rating: 30v/ 2A
6
Single phase parallel inverter bridge
Trainer with firing circuit and
R&rl load rating 30v/ 2A
7
Single phase cyclo converter trainer
Trainer with firing circuitand
R&rl load rating10A av/1200v
8
Single phase ac half controlled
Bridge converter power circuit trainer
With scr firing circuit module and r&rl load
Rating : 10A av / 1200v
9
Single phase series inverter bridge
Trainer with firing circuitand
r&rl load rating 30v/ 2A
10
Isolation transformers
Range : 230 v ,5 amps make itl
‐ 55 ‐ 11
Auto transformers
4
3300.00
13200.00
4
5800.00
23200.00
2
4000.00
8000.00
2
3475.00
6950.00
8
18200.00
145600.00
Range : 230 v ,5 amps make:ae
12
Variable dc. power supplies
Range :30v/5A make :itl; model :ts 30-5
Regulated DC power supply, Rating:30V/5A, single channel
Make: Labtech
13
Variable rheostat double tube
Range : 100 ohms 5 amps
14
220 mhz dual trace oscilliscope with
Alternance triggering
Model :5020; make :lg /ez
15
1:10 attenuation probes
4
500.00
2000.00
16
Moving Coil Ammeters, Make: BEEMET
2
475.00
950.00
2
475.00
950.00
2
475.00
950.00
2
550.00
1100.00
2
1400.00
2800.00
1
5375.00
5375.00
Range: 0-250/500 Mill Amps
Moving Coil Ammeters, Make: BEEMET
Range: 0-25/50 Mill Amps
Moving Coil Ammeters, Make: BEEMET
Range: 0-2.5/5 Mill Amps
Moving Iron Ammeters, Make: BEEMET
Range: 0-2.5/5 Mill Amps
17
3 ½ Digit Hand Held Digital Multimeter
Model: 603, Make :MECO
18
1KVA Center Tapped Isolation Transformer
Input : 0-230/5 Amp
Output: 0V/30V/60V/115/230
Output:0V/30V/60V/115/230 Make:PRAGNA
19
5 KVA Servo Controled Voltage Stabilizer Model SVS 500L Make ITL
1
10800
10800
20
Study of SCR firing circuits Make: HI-Q, Model: LT-5002
1
4500
4500
TOTAL
366195.00
‐ 56 ‐ ELECTRICAL AND ELECTRONICS ENGINEERING DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN ELECTRICAL MEASUREMENTS AND CIRCUITS LAB
DESCRIPTION
S.No.
QTY.
UNIT
PRICE
AMOUNT
BRIDGES:
1
Anderson Bridge
2
1980.00
3960.00
2
Kelvin’s Double Bridge
2
3500.00
7000.00
3
Conductivity Attachment for above
2
770.00
1540.00
4
Schering Bridge
2
2925.00
5850.00
5
Wheatstone Bridge Manganin Coils
1
2450.00
2450.00
2
97.00
194.00
GALVANO METERS:
1
Galvano Meters 30-0-30 20
Micro Amp/Div with Stand
2
Spot Reflecting Galvano Meters 125
Ohms
1
1745.00
1745.00
3
Spot Reflecting Galvano Meters 625
Ohms
1
1950.00
1950.00
4
Galvano Meters 30-0-30
2
121.00
242.00
2 Micro Amp/Div with Stand
DC REGULATED POWER SUPPLIES:
1
Dc Regulated Power Supplies 30V/2A
2
2500.00
5000.00
2
Dc Regulated Power Supplies 30V/2A Dual Channel
1
3625.00
3625.00
3
Dc Regulated Power Supplies 30V/5A Dual Channel
1
5688.00
5688.00
RHEOSTATS:
1
Rheostats (Stead) 50 Ohm/5A
1
2254.00
2254.00
2
Wire Wound Rheostat 50 Ohm/5A
2
840.00
1680.00
3
Fixed Resistance coils 0.1, 0.2,10 ,50, 100 & 200 Ohms
6
79.00
474.00
4
Rheostat. Make: Thoshniwal 100ohms/2.8Amp
1
3560.00
3560.00
5
Rheostat. Make: Thoshniwal 230ohms/1.7Amp
1
1185.00
1185.00
6
Rheostat. Make: Thoshniwal 18ohms/5Amp
3
925.00
2775.00
7
Rheostat. Make: Thoshniwal 50ohms/5Amp
3
1185.00
3555.00
8
Rheostat. Make: Thoshniwal 100ohms/2.8Amp
1
3560.00
3560.00
9
Rheostat. Make: Thoshniwal 11ohms/2 Amp
7
1100.00
7700.00
‐ 57 ‐ DECADE RESISTANCE BOX:
1
Decade Resistance Box. (Omaga). 115H 5 Dial
2
1160.00
2320.00
2
Decade Resistance Box. (Omaga). 115J 5 Dial
2
1160.00
2320.00
DECADE INDUCTANCE BOX:
1
Decade Inductance box. (Omaga). DL-1200 3 Dial.
1
2900.00
2900.00
2
Decade Inductance Box (Omaga). DL-120
1
1160.00
1160.00
3
Decade Inductance Box in 6 Decades. 10 Micro H-10H
2
3000.00
6000.00
1 Dial.
Model: 506. HI-Q Electronic
DECADE CAPACITANCE BOX:
1
Decade Capacitance Box.(omaga). 150PL 4 Dial.
1
3364.00
3364.00
2
Decade Capacitance Box.(omaga). 150PL 2 Dial.
1
1624.00
1624.00
3
Fixed
1
112.00
112.00
4
Decade Capacitance Box.in 5 Decades.100PF to10 uf.
2
1980.00
3960.00
2
2700.00
5400.00
Capacitance Box.
1M.F.D.
Model 405. Make: HI-Q Electronic.
5
Decade Capacitance Box.in 6 Decades.10PF to10 uf.
Model: 406. Make: HI-Q Electronic
OSCILLATORS:
1
Oscillator 10HZ to 500 KHZ
1
2350.00
2350.00
2
Low Distortion Audio Oscillator. 10HZ to 110KHZ.
1
2700.00
2700.00
3
Fixed Frequency. Oscillator
2
900.00
1800.00
FIXED INDUCTANCE:
1
Fixed inductance Air Core 5HZ.
1
465.00
465.00
2
Fixed Inductance Iron Core 2HZ.
1
405.00
405.00
3
Fixed Inductor Air Core. (Omaga)5,10,50,100,200mh 1H-1pc
6
465.00
2790.00
1
240.00
480.00
HEAD PHONES:
1
Head Phones
M.C AMMETERS:
1
M.C. Ammeters.
5/10A
1
895.00
895.00
2
M.C. Ammeters.
500/1000MA
2
895.00
1790.00
3
M.C. Ammeters.
2.5/5AMP
2
895.00
1790.00
4
M.C. Ammeters
1/2AMP
2
895.00
1790.00
5
M.C. Ammeters with stand 1/2A BEEMET
8
500.00
4000.00
‐ 58 ‐ M.I AMMETERS:
1
M.I. Ammeters.
5/10AMP
2
840.00
1680.00
2
M.I. Ammeters.
10/20AMP
1
840.00
840.00
3
Portable Ammeters 10Amp
1
1044.00
1044.00
M.I. VOLT METERS.
1
M.I. Volt meters. 0-125-250-500.V.
1
1018.00
1018.00
2
M.I. Volt meters. 0-300 V.
1
1044.00
1044.00
M.C. VOLT METERS.
1
M.C. Volt Meters. 0-75-150-300V.
1
965.00
965.00
2
M.C. Voltmeters. 0-15-30.V.
3
930.00
2790.00
3
M.C. Voltmeters. 0-15-30.V. with stand BEEMET
4
500.00
2000.00
1
Power Factor Meter Dynamometer type 3phase 400V.5/10A
1
3400.00
3400.00
2
Power Factor Meter Dynamometer type 1Phase75-150300V.
5/10AMP U.P.F.
1
2075.00
2075.00
3
Power Factor Meter UPF 5/10A 125/250/500V
1
2835.00
2835.00
4
Dial Pattern potentiometer 22 Coils with selector and
1
1505.00
1505.00
Ring Switch.
1
Crompton Potntiometer with Rang Switch.
1
1820.00
1820.00
2
Loading Rheostat Single Phase 2.5KW,10 Steps.
2
4950.00
9900.00
Resistive loads/1PH/230v/10amp/2.5 KW/10 steps
1
11682.00
11682.00
3
Loading Rheostat Three Phase 5.1KW, 170 Watts for phase.
1
10500.00
10500.00
4
Single Phase Inductive Load Variable Core 200V/10AMP
1
8400.00
8400.00
5
Inductive Load 220V/10Amp continously variable
1
16605.00
16605.00
6
Single Phase Capacitive Load 250v/10AMP.
1
4180.00
4180.00
7
Stop Watch L.C. 1/10. Sec
1
690.00
690.00
8
Electronic Standard Cell.
2
680.00
1360.00
9
Oil Testing Kit
1
13800.00
13800.00
10
Three Phase Inductive Load. 400V/10Amp
1
13800.00
13800.00
1
4800.00
4800.00
Of 250 watts Each.
L.C.R-Q METERS:
1
Hand Held L.C.R-Q. Meter. Make: M.I.C. 4070D.
WATT METERS:
‐ 59 ‐ 1
Portable
U.PF.
Dynamometer type Watt Meter.150-300V/5/10A.
2
Portable Dynamometer type Watt Meter.5/10A. 250/500V
1
1475.00
1475.00
1
1836.00
1836.00
1
2535.00
2535.00
U.PF.
3
Portable Dynamometer type Watt Meter.300-600V 5/10A
L.P.F
3
Dynamo meter type LPF Watt meter range 150/300/600V
1/2 A
2
4100.00
8200.00
4
Dynamo meter type UPF Watt meter range 150/300/600V
5/10 A
2
1810.00
3620.00
5
Dynamo meter type UPF Watt meter range 150/300/600V
5/10 A
1
1810.00
1810.00
1
800.00
800.00
Rating 440 V, 10 Amp
1
23000.00
23000.00
Regulated DC Power Supply
1
4900.00
4900.00
ENERGY METER (Single Phase)
1
Single Phase Energy meter
5/20 A BHEL
1
2
3 Phase loading inductor
Rating 0 - 30 V, 5 Amp. Dual Channel
Model LPS 30-5D, Make Labtech
1
SHARING BRIDGES
2
6500.00
13000.00
2
ANDERSON BRIDGES
2
7800.00
15600.00
3
CURRENT TANSFORMERS
2
2400.00
4800.00
4
KELVIN DOUBLE BRIDGE FOR MEASUREMENT OF
RESISTANCE
1
24570.00
24570.00
a. Spot Reflecting Galvona meter
1
7800.00
7800.00
b. Conductivity attachment for I.K.D.B.
1
3250.00
3250.00
Regulated DC Power Supply
2
4900.00
9800.00
1
3125.00
3125.00
Model: 29720
ACCESSORIES:
5
Rating: 0-30V: 5 Amp. Dual Channel.
Model: LPS 30-5D ; Make: LABTECH
6
LUX METER
Total
365256.00
‐ 60 ‐ ELECTRICAL AND ELECTRONICS ENGINEERING DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN CONTROL SYSTEMS LAB
DESCRIPTION
S.No.
1
Synchro Transmitter
QTY.
UNIT
PRICE
1
14340.00
14340.00
1
19360.00
19360.00
3
18000.00
54000.00
1
10325.00
10325.00
1
68000.00
68000.00
1
45377.00
45377.00
1
13310.00
13310.00
1
11900.00
11900.00
1
15540.00
15540.00
1
15540.00
15540.00
AMOUNT
Receiver Pair
Model: CK-6
Make: HEM
2
D.C. Position Control
Make: Techno
3
20 MHz Dual Trace C.R.O.
Model: OS 5020
Make: EZ/LG
4
Linear system Simulator
Make: Techno
5
Educational Microprocessor Based
Programmable Logic Controller
System with Built-in Rs.232 C & with PC Support
Serial Interface to UP LOAD & DOWN LOAD
6
Programmable Logic Controller(PLC) trainer
With manuals 3 Nos., User CD, Power card,
PLC Cable, set of Patch cards
6
PID Controller
Make: Techno
7
LAG & LEAD Compensation to
Design a suitable cascade compensator
Make: Techno
8
Characteristics of magnetic Amplifier
Model : CE - 18
Make: HEM
9
AC servo Speed Torque characteristics
Model: CE – 4
‐ 61 ‐ Make: HEM
10
1MHz Function Generators
3
7750.00
23250.00
1
7000.00
7000.00
Model : SM 5060
Make : Scientific
11
Temperature Controller System
Using PID on/off
Temperature Controller without recorder
12
DC Servo Motor
1
17790.00
17790.00
13
Simulation of transfer function using op-amp. Make: Hi-Q CST-6122
1
19500.00
19500
TOTAL
3,35,232.00
ELECTRICAL AND ELECTRONICS ENGINEERING DEPARTMENT
S.No.
1
LIST OF EQUIPMENT AVAILABLE IN ELECTRICAL SIMULATION LAB
UNIT
DESCRIPTION
QTY.
PRICE
SP6D - 04 Zenith PC:
16
20500.00
AMOUNT
328000
Intel PIV2_66GHZ/Intel 915 Chipset MBD/512 MB
RAM/40GB(7200RPM) ONB_Graphics & Audio
Sound/10/100LAN/Micro ATX Case/PS2, 107 Keys
KBD/PS/2 Mouse Optical/15" CRT Monitor
2
10 KVA UPS System with DC power pack
2
142000
284000
Make: Numeric
TOTAL
6,12,000.00
MECHANICAL ENGINEERING DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN WORKSHOP
S.NO
DESCRIPTION
QTY.
UNIT PRICE
AMOUNT
1
ANVIL
3
3450.00
10350.00
2
COPPER SOLDERING RODS
4
150.00
600.00
3
FLATTERS
14
164.00
2300.00
4
SLEDGE HAMMERS
14
79.00
1113.00
5
MOULDING KIT
1
3200.00
3200.00
6
TONG
21
53.00
1105.00
7
LEGVICE 6”
1
1200.00
1200.00
8
SWAGE BLOCK
1
3500.00
3500.00
9
ARC WELDING EQUIPMENT
1
15000.00
15000.00
10
ANGLE PLATE1
1
580.00
580.00
‐ 62 ‐ 11
ANVIL
1
1400.00
1400.00
12
BENCH VICE
11
1027.00
11300.00
13
CHISEL
27
48.00
1274.00
14
CALIPERS
20
125.00
2494.00
15
COMPASS
4
53.00
212.00
16
DRILL SET
27
188.00
5058.00
17
DIE
2
200.00
400.00
18
DEVIDER
3
14.00
42.00
19
FILE
95
83.00
7820.00
20
BENCH GRINDER
1
2800.00
2800.00
21
GAUGES
8
395.00
3163.00
22
HACK SAW FRAME
35
31.00
1088.00
23
POWER HACK SAW
1
7500.00
7500.00
24
HAMMER
15
43.00
653.00
25
MICROMETERS
2
1437.00
2875.00
26
PUNCHE
18
61.00
494.00
27
HYDRAULIC BENDER
1
8850.00
8850.00
28
REAMAR
1
65.00
65.00
29
SCRIBER
11
12.00
132.00
30
STEEL RULES
20
27.00
550.00
31
SCRIBING BLOCK
2
60.00
120.00
32
SCRIBER FOR SCRIBING BLOCK
12
12.00
144.00
33
SCRAPER
1
90.00
90.00
34
SURFACE PLATE
1
1800.00
1800.00
35
T SQUARE
22
39.00
858.00
36
TOOL BOX
1
580.00
580.00
37
BEVEL SQUARE
2
55.00
110.00
38
VICE
8
343.00
2744.00
39
V.BLOCK
1
550.00
550.00
40
BEVEL POTRACTOR
1
2800.00
2800.00
41
CHISEL
61
17.00
1018.00
42
C.CLAMP
2
42.00
84.00
43
HAND DRILL
1
2500.00
2500.00
44
FOLDING RULE
12
38.00
450.00
45
PLIERS
3
45.00
135.00
46
GROOVING PLOUGH
1
2500.00
2500.00
47
HAMMER
4
34.00
139.00
48
METAL JACK PLANE
1
230.00
230.00
49
MORTISE GAUGE
2
90.00
180.00
50
OIL STONE
2
50.00
100.00
‐ 63 ‐ 51
PLANE
17
177.00
3020.00
52
PLUMB
2
30.00
60.00
53
RABBETE
1
450.00
450.00
54
SAW
20
57.00
1138.00
55
SCREW DRIVER
2
100.00
200.00
56
SPOKE SHAVE
1
95.00
95.00
57
SPIRIT LEVEL
2
36.00
72.00
58
TRY SQARE
5
47.00
236.00
59
VICE
9
593.00
5337.00
60
ROUGH FILE
2
100.00
200.00
61
BLOW LAMP 1LIT
385.00
770.00
62
DOLLEY AND SET HAMMER
850.00
1700.00
63
THICKNESS GAUGE
2
1
SET
1
1300.00
1300.00
64
WIRE GAUAGE
1
45.00
45.00
65
HAMMER
3
201.00
605.00
66
MALLET
10
45.00
450.00
67
NOSE PLIER
102.00
510.00
68
HALLOW PUNCH
185.00
185.00
69
PINCER
5
1
SET
2
35.00
70.00
70
HAND RIVITING M/C
1
650.00
650.00
71
SNIP
20
62.00
1230.00
72
STEEL RULE
12
30.00
360.00
73
SOLDERING IRON 125 W
4
145.00
550.00
74
SOLDERING IRON COPPER KHADIS
3
95.00
285.00
75
TRAMMEL 12”
1
330.00
330.00
76
Iron Jack Plane A 4
10
305.00
3050.00
77
Block Plane
5
160.00
800.00
78
Clawhammer 1/2 LB
15
50.00
750.00
79
Oil Stone
4
90.00
360.00
80
Wood Rough File
4
135.00
540.00
81
Tenonsaw
6
75.00
450.00
82
Mortise Chisel
5
30.00
150.00
83
Rough File 12"
10
81.00
810.00
84
Dot Punch 4"
10
11.00
110.00
85
Ball Peen Hammer 1 LB
10
40.00
400.00
86
Trianguar File 8"
10
91.00
910.00
87
Half Round File 8"
10
145.00
1450.00
88
Diamond Point Chisel 6"
4
55.00
220.00
89
Round Tongs
10
99.00
990.00
‐ 64 ‐ 90
Flat Tongs
10
99.00
990.00
91
Hammer 3 LB
6
85.00
510.00
92
Hammer 4 LB
6
110.00
660.00
93
Flatters
10
110.00
1100.00
94
Wooden Mallet
6
40.00
240.00
95
Nose Plier 6"
10
105.00
1050.00
96
Straight Snip 10"
6
100.00
600.00
97
Rubber Hammer
5
40.00
200.00
98
Scribers
10
15.00
150.00
99
Sleeve Cutters
5
30.00
150.00
100
Cutting Plier
2
110.00
220.00
101
Screw Driver 12"
4
55.00
220.00
102
Screw Driver 6"
4
30.00
120.00
103
Testers
4
25.00
100.00
104
HSS Tool Bit 1/4 x 4"
10
75.00
750.00
105
HSS Tool Bit 5/16 x 3"
10
75.00
750.00
106
Tap Set 3/8" BSW
2
55.00
110.00
107
HSS Drill Bit 7.5mm
6
77.00
462.00
108
Milling Cutters 1/8" x 3"
6
275.00
1650.00
109
Lathe Tool Holder
4
120.00
480.00
110
Machine Wise
1
1050.00
1050.00
111
Bench Wise
4
1350.00
5400.00
112
Power Hack Saw Blades 12" x 1"
20
22.00
440.00
TOTAL
162490.00
‐ 65 ‐ MECHANICAL ENGINEERING DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN HEAT TRANSFER LAB
S.NO.
DESCRIPTION
QTY.
AMOUNT
1
Composite walls apparatus
1
29500.00
2
Lagged pipe apparatus
1
22200.00
3
Heat pipe demonstration
1
23100.00
4
Pin fin apparatus
1
22700.00
5
Natural convection apparatus
1
18500.00
6
Forced convection apparatus
1
23100.00
7
Emissivity measurement apparatus
1
19700.00
8
Stefan Boltzman apparatus
1
16400.00
9
Condensation in drop and film forms
1
32100.00
10
Critical heat flux apparatus
1
17700.00
11
Parallel flow counter flow heat exchanger
1
18200.00
12
Thermal conductivity of insulating powder
1
20900.00
13
Thermal conductivity of metal rod
1
25100.00
TOTAL
289200.00
LIST OF EQUIPMENT AVAILABLE IN THERMAL ENGINEERING LAB
S.NO.
1
DESCRIPTION
AMOUNT
Twin cylinder diesel engine with electrical alternator and exhaust
Gas calorimeter (4 stroke)
105588.00
2
Single cylinder diesel 4 stroke engine with rope brake dynamometer
51156.00
3
Single cylinder 4 stroke slow speed diesel engine ,rope brake dynamometer
54180.00
4
Two stage twin cylinder air compressor
58716.00
5
Refrigeration tutor
59472.00
6
Cut section model –single cylinder 2 stroke petrol engine
15624.00
7
Cut section model- single cylinder 4 stroke diesel engine
16380.00
8
Kirloskar Make 12 HP, 1500 RPM-Air cooled double sylender vertical hand start desil
engine-Model TAF2-II
71275.00
TOTAL
‐ 66 ‐ 432391.00
LIST OF EQUIPMENT AVAILABLE IN MECHANICS OF SOLIDS LAB
S.NO.
DESCRIPTION
AMOUNT
1
Rockwell cum Brinell hardness testing machine
23324.00
2
FIE Torsion testing machine
90323.00
3
KMI Tensile testing machine
101379.00
4
Weights
5
Universal Testing Machine
180.00
291607.00
TOTAL
6
Simply supported &Cantilever beams
506813.00
Manufactured in Work shop , BVCEC.
MECHANICAL ENGINEERING DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN METALLURGY LAB
S.NO
DESCRIPTION
QTY.
UNIT PRICE
AMOUNT
1
DIGITAL HEATTREATMENT FURNACE
1
16000.00
16000.00
2
DIGITAL MOUNTING PRESS
1
9500.00
9500.00
3
DRY AND WET LINISHER
2
7500.00
15000.00
4
HAND POLISHING STAND
3
2950.00
8850.00
5
JOMNEY APPARATUS
1
17000.00
17000.00
6
DISC POLISHING MACHINE(DOUBLE)
1
15000.00
15000.00
7
DISC POLISHING MACHINE(SINGLE)
1
8000.00
8000.00
8
METALLURGICAL MICROSCOPE(MONO)
2
9500.00
19000.00
9
METALLURGICAL MICROSCOPE(BINO)
2
11500.00
23000.00
10
METALLURGICAL MICROSCOPE(TRINO)
1
17900.00
17900.00
11
SPECIMEN CUTTING MACHINE
1
18500.00
18500.00
12
100X LENS
1
4650.00
4650.00
13
OVER HEAD PROJECTOR
BELL Make Over Head Projector(OHP) with double
lamp
52”X70” SCREEN
1
9000.00
9000.00
4
6100.00
24400.00
1
3600.00
3600.00
14
15
TOTAL
209400.00
‐ 67 ‐ LIST OF EQUIPMENT AVAILABLE IN FUELS AND LUBRICANTS LAB
S.NO
DESCRIPTION
QTY.
UNIT PRICE
AMOUNT
1
ABELS FLASH POINT APPARATUS
1
7420.00
7420.00
2
CARBON RESIDUE TEST APPARATUS
1
1834.00
1834.00
3
DEAD WEIGHT PRESSURE GAUGE
1
22900.00
22900.00
4
ENGLER’S VISCOMETER
1
5473.00
5473.00
5
PENSKY MARTIN APPARATUS
1
6988.00
6988.00
6
PENETROMETER
1
3960.00
3960.00
7
GREASE WORKER
1
1863.00
1863.00
8
REDWOOD VISCOMETER 1
1
5823.00
5823.00
9
REDWOOD VISCOMETER 2
1
7454.00
7454.00
10
SAYBOLT VISCOMETER
1
5823.00
5823.00
TOTAL
69538.00
MECHANICAL ENGINEERING DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN METROLOGY LAB
S.NO
DESCRIPTION
QTY.
UNIT PRICE
AMOUNT
1
PROFILE PROJECTOR
1
97500.00
97500.00
2
GRANITE SURFACE PLATE
1
7750.00
7750.00
3
BENCH CENTRE
1
12750.00
12750.00
4
SURFACE ROUGHNESS TESTER
1
89700.00
89700.00
5
DIAL INDICATOR(0.01)
3
1380.00
4140.00
6
DIAL INDICATOR(0.001)
1
2850.00
2850.00
7
VERNIER(150)
4
2070.00
8280.00
8
VERNIER(300)
1
4600.00
4600.00
9
GEAR TOOTH VERNIER
1
9775.00
9775.00
10
SLIP GAUGE SET (83)
2
6650.00
13300.00
11
BEVEL POTRACTOR
1
4025.00
4025.00
12
SINBE BAR(150)
1
2200.00
2200.00
13
STD GO-NOGO
1
865.00
865.00
14
STD GO-NOGO(M6)
1
865.00
865.00
15
RING GAUGE
1
2070.00
2070.00
16
RING GAUGE M6
1
2070.00
2070.00
17
SNAP GAUGE
1
865.00
865.00
18
S6TEEL V BLOCK
1
3220.00
3220.00
19
PLAIN RING GAUGE(10)
1
525.00
525.00
20
PLAIN RING GAUGE
1
175.00
175.00
‐ 68 ‐ 21
OUT SIDE MICROMETER
1
2000.00
2000.00
22
OUT SIDE MICROMETER(25-50)
1
1300.00
1300.00
23
OUT SIDE MICROMETER(50-75)
1
2300.00
2300.00
24
OUT SIDE MICROMETER(0.01)
1
2450.00
2450.00
25
RADIUS GAUGE
1
1250.00
1250.00
26
TAPER PLUG GAUGE MT1
1
2875.00
2875.00
27
TAPER PLUG GAUGE MT3
1
3680.00
3680.00
28
FEELER GAUGE
1
218.00
218.00
29
INSIDE MICROMETER(50-200)
2
7500.00
15000.00
30
BORE GAUGE
1
7500.00
7500.00
31
TELESCOPIC GAUGE
1
6785.00
6785.00
32
VERNIER HEIGHT GAUGE
1
7500.00
7500.00
33
MAGNETIC STAND JM102
1
1150.00
1150.00
34
MAGNETIC STAND JM103
1
1250.00
1250.00
35
DEPTH GAUGE
1
4200.00
4200.00
36
DISPLACEMENT MODULE
1
9500.00
9500.00
37
SPEED MODULE
1
14500.00
14500.00
38
STRAIN GAUGE
1
19500.00
19500.00
39
TEMPERATURE MEASUREMENT MODULE
1
10000.00
10000.00
40
LOAD CELL
1
13500.00
13500.00
41
VIBRATION MEASUREMENT MODULE
1
30000.00
3000.00
42
PRESSURE MEASUREMENT MODULE
1
21500.00
21500.00
43
STROBOSCOPE
1
14500.00
14500.00
44
PIEZO TRANSDUSER
1
10500.00
10500.00
45
FLOW MEASURMENT MODULE
1
34034.00
34034.00
TOTAL
477517.00
LIST OF EQUIPEMENT AVAILABLE IN FM & HM LAB
S.NO
DESCRIPTION
QTY.
UNIT PRICE
AMOUNT
1
VENTURIMETER TEST RIG
1
24000.00
24000.00
2
ORIFICE METER TESTRIG
1
22000.00
22000.00
3
BERNOULLI,S TESTRIG
1
24000.00
24000.00
4
PIPE FRICTION APPARATUS
1
22000.00
22000.00
5
CENTRIFUGALPUMP TEST RIG
1
24000.00
24000.00
6
ORIFICE/MOUTHPIECE TEST RIG
1
26000.00
26000.00
7
NOTCH APPARATUS
1
28000.00
28000.00
8
PELTON WHEEL
1
130000.00
130000.00
9
MULTISTAGE CENTRIFUGAL PUMP
1
18000.00
18000.00
TOTAL
318000.00
‐ 69 ‐ PRODUCTION TECHNOLOGY LAB-I
DESCRIPTION
S.No
1
Moulding Kit
2
Different Patterns –
3
1.5 Ounce Injection Moulding Machine
QTY.
AMOUNT
1.00
3200.00
7
200.00
3888.00
Regulator Bose
222.00
4
Injection Moulding dies
4
2000.00
5
Arc Welding Kit
6
Silica Sand
5000.00
7
Tools for moulding
5000.00
8
Wooden Moulding Boxes
6
2400.00
9
Hydraulic Press
1
35021.00
10
Spot Welding Machine
1
40905.00
15000.00
TOTAL
112836.00
MECHANICAL ENGINEERING DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN PRODUCTION TECHNOLOGY - II LAB
S.NO
DESCRIPTION
QTY.
AMOUNT
1
Lathe machine 4 ½’ 11” bed
4
80800.00
2
Lathe machine 4 ½’ 12” bed
1
21200.00
3
Shaper machine 18’
1
26700.00
4
Milling machine
1
16600.00
5
Slotting machine
1
27200.00
6
Radial drilling machine
1
15000.00
7
Surface grinder
1
27100.00
8
Accessories for machines
a) Through chuck
3850.00
b) Dog chuck
1350.00
c) Through chuck CRJ3
3680.00
d) Cutting tools equipment
6718.00
TOTAL
230198.00
‐ 70 ‐ LIST OF EQUIPMENT AVAILABLE IN CAD/CAM LAB
S.No
DESCRIPTION
QTY.
UNIT PRICE
AMOUNT
1
666000.00
666000.00
HMT CNC Trainmaster
1
V.M.C 200T
With color monitor
Complete with all STD ACC
56611.00
and special accessories
2
Zenith PC with 40 GB HDD,PIV PROCESSOR
15
15" Zenith Samsong
20500.00
307500.00
Colour Monitor
Kirloskar Make online 3 KVA UPS system with
GBT Technology
3
1
62000.00
62000.00
Sheled Maintainence free battery 30 minutes
backup 12V/24AH capacity
4
16 Port Ethernet hub
1
3950.00
3950.00
5
Kry / Kard 2kv Stabilizar
1
9500.00
9500.00
6
Zenith PC
15
27800.00
417000.00
CADian Professional 2008 unlimited users +
ALG Nastran - 99 Users Education Version
Prod. Sr. No. AE 61318
1
215000.00
215000.00
LG DVD Writers
15
1250.00
18750.00
Intel Pentium D Processor, Dual core4-2.8 GHz
Intel Chip 865 board, 1GB RAM(512X2)
80 GB HDD, Combo Drive,
Multimedia Keyboard, Optical Scroll Mouse,
ATX Silver & black cabinet
17" Colour monitor
7
8
TOTAL
1756311.00
‐ 71 ‐ ELECTRONICS AND COMMUNICATION ENGINEERING DEPARTMENT
LIST OF EQUIPEMENT AVAILABLE IN ANALOG /DIGITAL COMMUNICATION/ MICROWAVE AND
OPTICAL COMMUNICATIONS LAB
S.NO.
1
DESCRIPTION
QTY.
1
Spectrum analyzer
MODEL:-HM 5011,HEMAG
2
Digital storage Oscilloscopes (25 M Hz) LCD display
3
Cathode ray oscilloscope (0-30M HZ)
(SCIENTIFIC)
(EZ/LG—20 MHz)
Signal generators –1 MHz (SCIENTIFIC)
Function generators-1 MHz (AP LAB)
Function generators-3 MHz.
(SCIENTIFIC)
Power supplies –single channel
(0-30v/1A)
Power supplies –dual channel
(0-30V/1A)
(0-30V/2A)
Bread boards
(WISH, WB-102)
150 WATTS O/P POWER METER
(APLAB)
MULTIMETERS
DEMONSTRATION KITS FOR AC LAB
Pre-emphasis and de-emphasis demo .kit
Frequency mixer characterstics
Radio dynamic demo .kit
Phase locked loop
Amplitude modulation and demodulation
Frequency modulation and demodulation
Balanced modulation and demodulation
Single Side Band System
Synchronous Detector
Amplitude modulation and demodulation
Frequency modulation and demodulation
Frequency mixer Characteristics
Phase locked loop
Synchronous Detector
Pre-emphasis and de-emphasis demo .kit
Single Side Band System
Balanced modulation and demodulation
Diode detector Characteristics
Digital Phase detector
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
‐ 72 ‐ UNIT PRICE
166400.00
AMOUNT
166400.00
6
18512.00
111072.00
10
4
10
2
21870.00
18928.00
8060.00
9048.00
218700.00
75712.00
80600.00
18096.00
4
5
9880.00
2484.00
39520.00
12420.00
5
4
3880.00
4472.00
19440.00
17888.00
5
2
216.00
10345.00
1080.00
20690.00
5
1694.00
8470.00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1155.00
1785.00
2047.00
2152.00
1716.00
2704.00
2756.00
4420.00
2652.00
1531.00
1853.00
1169.00
1853.00
2296.00
1249.00
3224.00
1415.00
2418.00
2418.00
1155.00
1785.00
2047.00
2152.00
1716.00
2704.00
2756.00
4420.00
2652.00
1531.00
1853.00
1169.00
1853.00
2296.00
1249.00
3224.00
1415.00
4836.00
4836.00
29
30
2418.00
2418.00
4836.00
4836.00
31
32
33
34
35
36
37
38
39
40
Frequency Synthesizer
2
AGC Characteristics
2
DEMONSTRATION KITS FOR DIGITAL COMMUNICATIONS LAB
Sampling theorem
1
PWM modulation and demodulation
1
PAM modulation and demodulation
1
PPM modulation and demodulation
1
PCM Modulation Trainer
1
PCM Demodulation Trainer
1
Delta Modulation and Demodulation Trainer
1
FSK, ASK &DPSK Trainer
1
FSK, ASK &DPSK Demodulation Trainer
1
Data modem Trainer
1
2860.00
2496.00
2184.00
2652.00
9360.00
9360.00
13104.00
7488.00
7488.00
33696.00
2860.00
2496.00
2184.00
2652.00
9360.00
9360.00
13104.00
7488.00
7488.00
33696.00
41
TDM Pulse amplitude mod & demodulation kit
1
10670.00
10670.00
42
Defferntial Phase shift keying kit
1
4862.00
4862.00
43
Defferntial Pulse code modulation & demod kit
1
7956.00
7956.00
44
Delta Mod & Demod Kit (Model: DM-3216)
1
4222.00
4222.00
45
FSK & Demod Kit (Model: FSK-3212)
1
4222.00
4222.00
46
PSK & Demod Kit (Model: PSK-3210)
1
4222.00
4222.00
47
PAM Mod & Demod Kit (Model: PAM-3203)
1
2766.00
2766.00
48
PWM & Demod Kit (Model: PWM-3205)
1
2766.00
2766.00
49
PPM & Demod Kit (Model: PPM-3206)
1
2766.00
2766.00
50
Anlog sampling and reconstruction(STM-3204)
1
2766.00
2766.00
51
Time Division multiplexing (TDM-3218)
2
2766.00
5532.00
52
Defferntial Pulse code modulation & demod kit
1
5460.00
5460.00
53
Defferntial Phase shift keying kit
1
2766.00
2766.00
54
Pulse Code modulation & demodulation
2
5460.00
10920.00
55
Delta Mod & Demod Kit (Model: DM-3216)
2
2767.00
5534.00
2
77580.50
155161.00
1
72842.00
72842.00
MICROWAVE & OPTICAL COMMUNICATIONS LAB
X-BAND MICROWAVE BENCHES
56
Reflux klystron Bench
SX-9000
57
Gunn oscillator Bench
SX-9001
X-Band Microwave components
58
Matched termination low power(XL-400)
4
1732.50
6930.00
59
Variable attenuator XA-520
2
3844.50
7689.00
60
Three –port circulators(T)XC-621
1
3691.00
3691.00
(Y) XC-622
1
3691.00
3691.00
61
MHD Couplers -20 dB XK –620
2
4205.50
8411.00
62
Slotted section with carriage XS-651
2
6479.00
12958.00
63
Tunable probe XP-655
2
1842.50
3685.00
‐ 73 ‐ 64
Wave detector mount (tunable) XD-451
2
2887.50
5775.00
65
Cross directional coupler XK-662
2
1793.00
3586.00
66
Movable short XT-481
2
1815.00
3630.00
67
Slide screw tuner XT-441
2
2535.50
5071.00
68
E- Plane Tee XE-361
2
1331.00
2662.00
69
H- Plane Tee XE-365
2
1331.00
2662.00
70
BNC Cable
5
335.50
1678.00
71
TNC Cable
3
363.00
1089.00
72
Klystron tube 2K25
2
9942.00
19884.00
73
Peramidol horn XH-541
2
2502.50
5005.00
74
90 Twist XB-751
1
1617.00
1617.00
75
Wave guide flange covers UG 35 U
10
159.50
1595.00
76
Wave guides RG 52 / U
1
1155.00
1155.00
77
Phase shifter XS –301
1
4334.00
4334.00
78
Radiation pattern XTB –105
1
9350.00
9350.00
79
Dielectric antenna XD-315
1
4895.00
4895.00
80
Matched magic XE-350
2
2381.50
4763.00
81
X Band KLYSTRON Test Bench
2
model: XB-8000
82
Klystron Power Supply
2
12480.00
24960.00
VSWR Meter
2
7904.00
15808.00
Klystron mount with tube
Frequency meter
2
2
4326.50
6822.50
8653.00
13645.00
Slotted section with probe carriage
2
4992.00
9984.00
Tunable probe
2
1664.00
3328.00
Detector mount
2
2412.50
4825.00
Movable short
2
1497.50
2995.00
Matched termination
2
1581.00
3162.00
SS Tuner
2
2080.00
4160.00
Wave Guide Stands
8
332.75
2662.00
Cooling Fans
2
499.00
998.00
X Band Gunn diode test bench
1
Gunn Power supply
1
5824.00
5824.00
VSWR Meter
1
7904.00
7904.00
Frequency meter
1
6822.00
6822.00
Detector mount
1
2413.00
2413.00
Movable short
1
1498.00
1498.00
Matched termination
1
1581.00
1581.00
Wave Guide Stands
4
332.75
1331.00
Gunn Oscillator
1
9568.00
9568.00
Pin Modulator
1
3744.00
3744.00
‐ 74 ‐ Slotted section with probe carriage
1
4992.00
4992.00
83
Isolator
3
2995.00
8985.00
84
Variable Attenuator
3
3120.00
9360.00
85
Tunable probe
4
1664.00
6656.00
86
Crystal Diodes IN23
20
850.00
17000.00
87
DEMONISTRATION KITS FOR OPTICAL COMMUNICATIONS LAB
Fiber optics trainer
(ST 2502-SCIENTIFIC)
1
35640.00
35640.00
88
Optical Fiber Trainer Kit - Analog Link
2021)
(Model: OFT-
1
12012.00
12012.00
89
Optical Fiber Trainer Kit - Analog Link
2021)
(Model: OFT-
2
8736.00
17472.00
90
Optical Fiber Trainer Kit - Digital Link
1
12480.00
12480.00
91
Optical Fiber Trainer Kit - Digital Link
1
12012.00
12012.00
1
19890.00
19890.00
2
12012.00
24024.00
92
93
Laser Diode intensity Modulation trainer kit
(fiber optic kit)
Laser Trainer (Model: LT-2023)
TOTAL
16,83,724.00
ELECTRONICS AND COMMUNICATION ENGINEERING DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN ELECTRONIC DEVICES AND CIRCUITS LAB
S.NO.
1
DESCRIPTION
QTY.
UNIT PRICE
AMOUNT
Cathode ray oscilloscopes - Make:LG
8
20389.50
163116.00
Make: SCIENTIFIC
2
21060.00
42120.00
Function generators - Make:HI-Q
4
1914.75
7659.00
Make: SCIENTIFIC
4
8520.00
34080.00
Make-HI-Q-3010A
6
3120.00
18720.00
Single channel power supplies
6
1966.00
11796.00
4
Dual channel power supplies
5
3312.00
16560.00
5
Servo stabilizer
1
6365.00
6365.00
6
Digital Multi meters
5
1785.40
8927.00
Multi Meters (Model: CIE 122)
3
1716.00
5148.00
1) 0-2 v
12
438.66
5264.00
2) 0-30 v
12
439.87
5278.00
3) 0-100 m v
4
414.00
1656.00
4) 0-500m v
4
414.00
1656.00
1) 0-100 u A
6
468.50
2811.00
2) 0-500 u A
8
467.75
3742.00
3) 0-100 m A
14
467.50
6545.00
4) 0-500 m A
2
414.00
828.00
2
3
7
8
Volt meters
Ammeters
‐ 75 ‐ 9
10
5) 0-1 m A
4
466.50
1866.00
6) 0-10 m A
4
466.50
1866.00
Decade resistance boxes
6
1190.00
7141.00
Decade resistance boxes
6
1061.00
6365.00
Decade inductance boxes
6
1560.00
9360.00
11
Decade capacitence boxes
6
2808.00
16848.00
12
Bread boards
10
181.10
1811.00
Bread boards
6
130.00
780.00
DEMONSTRATION KITS ; MAKE :- GARGI.
13
Rectifiers with filters
1
1612.00
1612.00
14
CE Amplifier
1
1092.00
1092.00
15
CC amplifier
1
1560.00
1560.00
16
RC phase shift oscillator
1
1612.00
1612.00
17
Feed back amplifier
1
1404.00
1404.00
18
RC coupled amplifier
1
1196.00
1196.00
19
FET Amplifier
1
1196.00
1196.00
20
Push pull amplifier
1
1768.00
1768.00
21
Heartly oscillator
1
1144.00
1144.00
22
Colpits oscillator
1
1144.00
1144.00
MAKE: - HI -Q. .
23
PN Diode characteristics
1
973.00
973.00
24
CB characteristics
1
973.00
973.00
25
CE characteristics
1
973.00
973.00
26
UJT characteristics
1
1229.00
1229.00
27
FET characteristics
1
973.00
973.00
28
CE amplifier
1
973.00
973.00
29
CC amplifier
1
973.00
973.00
30
R C Coupled amplifier
1
973.00
973.00
31
FET amplifier
1
973.00
973.00
32
CE Class ABC amplifier
1
973.00
973.00
33
Colpits oscillator
1
973.00
973.00
34
Feed back amplifier
1
973.00
973.00
35
Millers theorem
1
973.00
973.00
36
Zener diode characteristics
1
973.00
973.00
37
RC phase shift oscillator
1
973.00
973.00
38
Tuned RF (CLASS C) amplifier
1
973.00
973.00
39
Rectifiers with filters
1
1179.00
1179.00
40
Tuned voltage amplifier
1
1015.00
1015.00
41
Transistor h-parameters
1
1498.00
1498.00
42
Class A, AB Power Amplifier Kit
1
874.00
874.00
43
Class B, Complementary Symmetry Configuration Kit
1
874.00
874.00
‐ 76 ‐ 44
Wein Bridge Oscillatro Kit
2
765.00
1530.00
45
SCR Characteristics Kit- Make:Aquila
2
1169.00
2338.00
TOTAL
4,27,168.00
ELECTRONICS AND COMMUNICATION ENGINEERING DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN THE ICA LAB
S.NO.
1
DESCRIPTION
QTY.
UNIT PRICE
AMOUNT
Cathode ray oscilloscopes
1) LG
Make
4
18837.00
75348.00
2)LG
Make
1
18720.00
18720.00
3) SCIENTIFIC Make
4
22744.75
90979.00
4) Scientific HM203G
3
18533.00
55599.00
Function generators (pacific)
10
5208.00
52080.00
Function generators (HI-Q)
5
3120.00
15600.00
3
Pulse generators (Scientific)
2
13594.50
27189.00
4
Power supplies
2
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
1)single channel -0-30 v
12
1366.40
16397.00
2)dual channel - 0-30 v
3)fixed type --5v
Servo stabilizer make-ITL
Digital multi meters CIE 122
Digital IC Trainer full system
--do-Bread board trainer system
--do---do--(HI-Q Make)
Bread boards
--do-DEMONSTRATION KITS
Linear wave shaping
Astable multivibrator
Monostable multivibrator
Bistable multivibrator
Schmitt trigger
UJT relaxation oscillator
Integrator and differentiator using OP AMP
BCD to 7 Segment decades using IC7447
Boot strap sweep circuit
Study of non-linear wave shaping circuit
Study of logic gates and some applications
Study of Astable , Monostable using 555
Study of function generator using 741
4
5
1
6
1
1
1
1
5
5
5
3038.00
955.20
6280.00
1759.65
5299.00
5530.00
5299.00
5530.00
3786.00
216.00
208.00
12152.00
4776.00
6280.00
10558.00
5299.00
5530.00
5299.00
5530.00
18928.00
1080.00
1040.00
1
1
1
1
1
1
1
1
1
1
1
1
1
974.00
974.00
974.00
974.00
974.00
1033.00
974.00
974.00
1003.00
1016.00
1847.00
1016.00
1231.00
974.00
974.00
974.00
974.00
974.00
1033.00
974.00
974.00
1003.00
1016.00
1847.00
1016.00
1231.00
‐ 77 ‐ 23
24
25
26
27
28
29
Study of Half &Full adders & Subtracter
Transistor as a switch
Inverter transfer characteristics trainer
D / A Converter
Voltage regulator using IC 723 demo .kit
Phase locked loop demo.kit using IC565 PLL
A/D converter demo.kit
TOTAL
1
1
1
1
1
1
1
1231.00
887.00
1185.00
1185.00
1794.00
975.00
2184.00
1231.00
887.00
1185.00
1185.00
1794.00
975.00
2184.00
4,51,789.00
ELECTRONICS AND COMMUNICATION ENGINEERING DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN MICRO PROCESSORS & MICRO CONTROLERS LAB
S.NO.
1
2
3
DESCRIPTION
Pentium III system
HCL BB 500/512 KB/64MB/8GB/
1.44MB/8MB APG/2S/14/
HCL 14”DIGITAL COLOUR
VGA MONITOR 10/2
E-NET CARD
Pentium IV system
1.86 GHz Intel
855 Chipset Mother Board
125 MB RAM
40 GB HDD, 107 Keyboard,
Lightron Scroll Mouse, 15"Zenith Colour Monitor
COMPUTER NODES
HCL BB CEL 433
MODEL:-BVCB 10 21/2.
HCL 14” DIGITAL COLOUR VGA`
QTY.
1
UNIT PRICE
43990.00
AMOUNT
43990.00
15
26208.00
393120.00
7
28000.00
196000.00
MONITOR 10/2
4
E-NET CARD.
7
932.00
6524.00
5
8086 Microprocessor kit
10
7735.00
77350.00
6
8051 Microcontroller kits
6
10920.00
65520.00
7
8051 Microcontroller kits
6
7875.00
47250.00
8
8086 Microprocessor with EPROM
2
1319.50
2639.00
Programmer kit
9
8085 Microprocessor kit
4
4550.00
18200.00
10
Interface stepper motor to 8086
2
3512.50
7025.00
11
Interface A/D converter
2
864.50
1729.00
12
Interface D/A converter
2
864.50
1729.00
13
Interface key board / display controller
2
1001.00
2002.00
14
Traffic lights interface
2
864.50
1729.00
‐ 78 ‐ 15
4 digit seven segment display interface
2
864.50
1729.00
16
Elevator Interface modules
2
933.00
1866.00
17
Real time clock Interface module
2
933.00
1866.00
18
Temperature loop interface
2
4719.00
9438.00
19
16 Channel 8 bit ADC interface
2
1544.00
3088.00
20
EPROM eraser
1
2293.00
2293.00
21
Universal device programmer & tester
1
22464.00
22464.00
22
2KVA Uninterrupted power supplies
1
36036.00
36036.00
23
Power supplies
6
773.50
4641.00
(+/- 5 v, +/- 12 v, +/- 30 v, GND)
6
1406.50
8439.00
25
Power back up for RAM
10
163.80
1638.00
26
26 Core ribbon cable connectors
8
141.00
1128.00
27
RS 232 C Cable connector set
8
223.00
1784.00
28
RS-232 C Cable -D -type -25 pin -male type
2
225.00
450.00
29
Stabilizer - 5 KVA
1
10260.00
10260.00
30
IC Tester (Digital )
1
25935.00
25935.00
31
Stepper Motor Interface with Stepper Motor
1
3015.00
3015.00
32
16 Channel 8 Bit ADC Interface
1
1560.00
1560.00
33
Dual DAC Interface
1
730.00
730.00
(+/- 5 v, +/- 12 v, GND)
24
Power supplies
TOTAL
10,03,167.00
ELECTRONICS AND COMMUNICATION ENGINEERING DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN PDC LAB
S.NO.
1
DESCRIPTION
QTY.
CATHODE RAY OSCILLOSCOPES (LG)
FUNCTION GENERATORS
AMOUNT
5
20399.40
101997.50
5
18720.00
93600.00
(HI-Q)
4
1914.75
7659.00
SCIENTIFIC
6
8060.00
48360.00
LG-2
UNIT PRICE
3
SINGLE CHANNEL POWER SUPPLIES
4
1966.00
7864.00
4
DUAL CHANNEL POWER SUPPLIES
4
3312.00
13248.00
5
DUAL CHANNEL POWER SUPPLIES
2
3428.00
6856.00
6
SERVO CONTROLLED STABILIZER
1
6365.00
6365.00
SERVO CONTROLLED STABILIZER
1
6768.30
6768.30
7
DIGITAL L.C.R. METER
1
7390.00
7390.00
8
MULTIMETERS
5
1785.40
8927.00
‐ 79 ‐ MULTIMETERS
5
1694.16
8470.80
9
AC MILLIE VOLT METERS
3
3105.00
9315.00
10
DECADE RESISTANCE BOXES
6
1190.00
7141.00
11
DECADE INDUCTANCE BOXES
8
2018.25
16146.00
12
DECADE CAPACITANCE BOXES
8
1914.75
15318.00
13
BREAD BOARDS
10
181.10
1811.00
14
AMMETERS (MC):
0-100 mA
2
544.50
1089.00
0-10 A
4
544.50
2178.00
0-200 mA
2
544.50
1089.00
0-500 mA
2
489.00
978.00
0-500 micro amp
2
520.00
1040.00
0-100 mA
2
520.00
1040.00
0-30 v
4
489.00
1956.00
0-2V
3
520.00
1560.00
15
VOLTMETERS (MC):
16
AUDIO POWER METER
1
3276.00
3276.00
17
LCR -Q BRIDGE METER
1
15444.00
15444.00
18
FET INPUT MULTIMETER
1
4960.00
4960.00
19
PHOTO DIODE TRAINER
1
1404.00
1404.00
20
CAPACITORS TRANSDUCERS TRAINER
1
4418.00
4418.00
21
PEIZO-ELECTRIC TRANSDUCERS TRAINER
1
4231.00
4231.00
TOTAL
4,11,899.60
ELECTRONICS AND COMMUNICATION ENGINEERING DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN ECAD/ECA/DSP LAB
S.NO.
1
DESCRIPTION
QTY.
Pentium -4
UNIT PRICE
AMOUNT
1
26250.00
26250.00
30
16148.00
484440.00
1.8 GHZ
845 Chipset mother board
40 GB HDD / 1.44 FDD / 128 MB RAM
52 X CD ROM Drive / Key board
Scroll Mouse / Lan card
IBM LCD Display
2
Zenith PC
15" monitors / 80 GB HDD
‐ 80 ‐ Key board / 512 MB RAM
Mouse with pad
3
Kirloskar Make online 3 KVA UPS system with GBT
Technology
1
44000.00
44000.00
Sheled Maintainence free battery 30 minits backup
12V/24AH capacity
4
D-Link 16 Port Hub
2
4350.00
8700.00
5
D-Link 16 Port Switch
2
3475.00
6950.00
6
52 X CD ROM Drive
4
1400.00
5600.00
7
1.44 MB FDD
4
450.00
1800.00
8
Stabilizer --10 KVA
1
14700.00
14700.00
9
RJ 45 Jocks
3
100.00
300.00
10
B2 Spice Simmulation and analysis Software
1
165000.00
165000.00
11
Xilinx ISE VLSI-VHDL Design Software
1
60000.00
60000.00
12
Altera Quartus II VLSI-VHDL Design Software
1
20000.00
20000.00
160550.00
160550.00
26500.00
139920.00
Lab Kits
13
Xilinx-FPGA(Spartan2) Lab kit
2
14
Xilinx-CPLD (Cool Runner) Lab kit
2
15
Altera-FPGA(ACEX1K) kit
1
16
Altera-CPLD(Max3000) kit
1
17
Multivender kit
1
18
Xilinx Virtex-FPGA based project kit
1
19
DSP Starter Kits(DSK) TMS 320C 6713
6
TOTAL
11,38,210.00
ELECTRONICS AND COMMUNICATION ENGINEERING DEPARTMENT
GENERAL UTILITY EQUIPMENT
S.NO.
1
DESCRIPTION
QTY.
Zenith PC
UNIT PRICE
AMOUNT
10
16148.00
161480.00
1
50000.00
50000.00
15" monitors / 80 GB HDD
Key board / 512 MB RAM
Mouse with pad
2
LCD Projector
Make: Sony, Model: VPL-ES3
Range: 2000 ANSI LUMENS
3
6/8" Projection Screen Stand Type
1
4200.00
4200.00
4
LCD Projector
1
38000.00
38000.00
Make: Sony, Model: VPL-ES5
Range: 2000 ANSI LUMENS
‐ 81 ‐ 5
HP Laserjet 1020 Printer
1
6700.00
6700.00
6
OHP
1
6100.00
6100.00
7
OHP
2
12000.00
24000.00
8
HP Scanjet 2410
1
3450.00
3450.00
9
EPABX Intercome system
1
53040.00
53040.00
10
Public Addressing System
1
27317.00
27317.00
(Amplifier, SAX 150 Boxes, Cordless Mike, TP 50
Tape Deck)
11
Cordless Mike(Model: WM 308)
1
750.00
750.00
12
Cordless Coller Mike(Model: WR 601)
1
800.00
800.00
13
Coller Mike
1
650.00
650.00
TOTAL
3,76,487.00
COMPUTER SCIENCE & ENGINEERING DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN COMPUTER LABS
COMPUTER LAB - I
S.No.
1
DESCRIPTION
COMPAQ-PIV 2.8 GHz, 256 DDRRAM, 40GB
HDD, on board LAN optical mouse MM keyboard,
15" COMPAQ monitor
QTY.
15
UNIT PRICE
26000.00
AMOUNT
390000.00
2
Pentium Dual Core 3.0 GHZ, 512 MB RAM, 80 GB
HDD, on board LAN, 107 keys keyboard, scroll
mouse,15" colour monitor
19
16148.00
306812.00
3
HP 5100 Laser Jet Printer
1
72800.00
72800.00
4
TVSE.MSP345 Classic
1
13900.00
13900.00
5
Dotmatrix
HP 1020 Laser Jet Printer(To Sent All HODs &
LABS)
D.Link 16 Port Switch
8
6700.00
53600.00
2
7700.00
15400.00
6
TOTAL
852512.00
COMPUTER LAB-II
S.No.
1
DESCRIPTION
Pentium Dual Core 3.0 GHZ, 512 MB RAM, 80 GB HDD, on
board LAN, 107 keys keyboard, scroll mouse,15" colour
monitor
QTY.
34
UNIT PRICE
16148.00
AMOUNT
549032.00
2
WIPRO-LQ 5400
1
22350.00
22350.00
3
WIPRO-HQ 1040 BMP
1
13900.00
13900.00
4
16-Port D-Link Switch
1
3475.00
3475.00
5
16-Port D-Link Switch
1
7700.00
7700.00
‐ 82 ‐ 6
24-Port D-Link manageble Switch with 1 GB port
TOTAL
‐ 83 ‐ 1
47000.00
47000.00
643457.00
COMPUTER SCIENCE & ENGINEERING DEPARTMENT
COMPUTER LAB-III
S.No.
DESCRIPTION
QTY.
UNIT PRICE
AMOUNT
1
Zenith Make PIV 2.66, 1 MB Cache, 256 DDR RAM,
80 GB SATA HDD, 10/100 LAN, IBM Key Board,
Optical Mouse, 15" Monitor
25
19600.00
490000.00
2
WIPRO LG-1050+DX
1
17000.00
17000.00
3
TVSE MSP 355 XL
1
13800.00
13800.00
4
16-Port D-Link Switch
2
3475.00
6950.00
5
6
10 SASE - T 16 Port Ethernet Hub
Kirloskar Make online 3 KVA UPS system with
GBT Technology
Sheled Maintainence free battery 30 minits
backup 12V/24AH capacity
1
2
3950.00
62000.00
3950.00
124000.00
7
Pentium Dual Core 3.0 GHZ, 512 MB RAM, 80 GB
HDD, on board LAN, 107 keys keyboard, scroll
mouse,15" colour monitor,
2
16148.00
32296.00
7
19600.00
137200.00
8
Zenith PIV 2.8GHZ, OEM Mohter Board, 256 DDR
RAM, 80 GB HDD, 10/100 LAN, Cumbo Drive, Zenith
Keyboard, Optical Scroll Mouse, 15" Zenith Monitor
TOTAL
825196.00
COMPUTER LAB-IV
S.No.
1
DESCRIPTION
QTY.
IBM Make PIV 2.66, 1 MB Cache, 256 DDR RAM, 80
GB SATA HDD, 10/100 LAN, IBM Key Board, Optical
Mouse, 15" Monitor
UNIT PRICE
AMOUNT
32
26250.00
840000.00
2
Pentium Dual Core 3.0 GHZ, 512 MB RAM, 80 GB
HDD, on board LAN, 107 keys keyboard, scroll
mouse,15" colour monitor
2
16148.00
32296.00
3
132 Coloum Epson 1050+ Dot matrix
1
13000.00
13000.00
4
5
D-Link 16 port switch
2
2
3475.00
62000.00
6950.00
124000.00
Kirloskar Make online 3 KVA UPS system with
GBT Technology
Sheled Maintainence free battery 30 minits
backup 12V/24AH capacity
TOTAL
1016246.00
‐ 84 ‐ COMPUTER SCIENCE & ENGINEERING DEPARTMENT
PROJECT LAB
S.No.
1
DESCRIPTION
QTY.
Zenith PC Pentium IV 1.5 GHz 1X1GB
UNIT PRICE
AMOUNT
1
32500.00
32500.00
15
26208.00
393120.00
SD Ram 32 MB VGA Ram 20 GB HDD
48 X CD Ram, 1.44 MB FDD, 15” Samsung
Monitor, Internet Keyboard Logitech Mouse
(Scroll) with Pad
2
Zenith PC Pentium IV 1.8 GHz
128 MB Ram 40 GB HDD, 15” Zenith
Monitor, Internet Keyboard Logitech Mouse
(Scroll) with Pad
3
Pentium Dual Core 3.0 GHZ, 256 MB RAM, 80 GB HDD,
on board LAN, 107 keys keyboard, scroll mouse,15"
colour monitor, Combo Drive
2
19600.00
39200.00
4
COMPAQ-PIV 2.8 GHz, 256 DDRRAM, 40GB HDD, on
board LAN optical mouse MM keyboard, 15" COMPAQ
monitor
8
26000.00
208000.00
2
36300.00
72600.00
5
HP - Celeron - Intel 128 DDR RAM, 20GB HDD, on board
LAN optical mouse MM keyboard, 15" HP monitor
6
D.LINK 16 Port switch
2
3475.00
6950.00
7
8
TVSE QX 235 printer
1
1
13500.00
62000.00
13500.00
62000.00
1
14500.00
14500.00
Kirloskar Make online 3 KVA UPS system with GBT
Technology
Sheled Maintainence free battery 30 minits backup
12V/24AH capacity
9
10 KVA Power Tech Servo stabilizer
TOTAL
842370.00
‐ 85 ‐ SERVER ROOM
S.No.
DESCRIPTION
1
2
QTY.
HP E60 Net Server with 15" Colour monitor
HP ML 150 SERVER
UNIT PRICE
AMOUNT
1
116000.00
116000.00
1
164000.00
164000.00
1
504000.00
504000.00
PENTIUM XEON PROCESSOR 2.4GHZ
1GB ECC RAM CDRW
3X36 GB SCSI HDD
3
HP ML 350 G3 XERON 2.8 GHZ
2 GB DD RAM
4X72.8 SCSI HDD
SMART ARRAY 641 RAID CONTROLLER
CISCO 1751 ROUTER
CISCO SWITCH
RAD HTU-E1 V.35 MODEM
RAD HTU-E1 G.703 MODEM
4
D-Link 8 port switch
1
9300.00
9300.00
5
Microprocessor based online 15 KVA UPS System
with IGBT Technology
Make: Kirloskar
1
172000.00
172000.00
6
VRL Battries, Capacity 12V/70 AH, Make:ROCKET
19
3400.00
64600.00
Total
1029900.00
COMPUTER SCIENCE & ENGINEERING DEPARTMENT
LIST OF SOFTWARE AVAILABLE
S.No.
DESCRIPTION
QTY.
UNIT PRICE
AMOUNT
1
Ms-Window 98 OEM
15
4500.00
67500.00
2
Red Hat Linix 9.0 Professional
1
8250.00
8250.00
3
MS-Windows -2003 5 Users
1
44500.00
44500.00
4
MS Visual Studio.Net
30
3300.00
99000.00
5
Macro Media Flash
10
4400.00
44000.00
6
Ms Windows XP
3
7600.00
22800.00
7
MS Visual Studio.Net Media Kit
30
1500.00
1500.00
8
8051 Development Board with Accessories
15
5900.00
88500.00
(Embedded Systems)
Total
376050.00
‐ 86 ‐ 8) ADDITIONAL SYSTEMS FOR EMERGENCY REPLACEMENT
1
Pentium Dual Core 3.0 GHZ, 256 MB RAM, 80 GB HDD,
on board LAN, 107 keys keyboard, scroll mouse,15"
colour monitor
15
UNIT
PRICE
16148.00
2
P-IV 1.8 GHZ/128 MB SDRAM/40 GB HDD
3
26208.00
78624.00
1
40750.00
40750.00
HCL BB PIII 500, 14" colour monitor
1
43000.00
43000.00
Zenith P III 533 MHz, 256 KB Cache, 20 GB
HDD, 14" colour monitor
30
28700.00
861000.00
LCD PROJECTOR HITACHI
1
136400.00
136400.00
1 KVA SERVO STABILIZER
1
2200.00
2200.00
LASER PEN
1
1000.00
1000.00
SPIKE BUSTER
1
400.00
400.00
SONY VPL ES2 LCD, 1500 ANSI
1
50000.00
50000.00
1
95120.00
95120.00
S.No.
DESCRIPTION
QTY.
AMOUNT
242220.00
1.44 FDD/10/100 E-NET CARD ONBOARD/
15" COLOUR MONITOR
3
Zenith Intel Pentium III 733 MHz
128 MB SD RAM,
20 GB HDD, Keyboard, Scroll Mouse,
LAN Card, 15" Zenith Color Monitor
4
5
LCD
EQUIEPMENT
6
7
LUMENES SVGA, 4500 hours high lamp
life, 80-100 people capacity.
8
V-SAT EQUIPMENT
HUGHES DIRECWAY 256KBPS
MOTHER ANTENNA
9
SONET EQUIPMENT
LG 29" TV
Supplied by
SONET-A.P.
2 K.V.A UPS
SONET ANTENNA & RECEIVER
10
5 KVA Power Tech Servo Stabilizer
1
8700.00
8700.00
11
16 Port Hub
1
9100.00
9100.00
12
16 Port D-Link Hubs
2
6300.00
12600.00
13
16 Port D-Link Hub
1
4500.00
4500.00
14
C_Net 16 Port Hubs
4
4500.00
18000.00
15
16 Port D-Link Hub
1
3900.00
3900.00
16
8 Port Intex Hub
1
800.00
800.00
‐ 87 ‐ 17
Pentium-133 MHz 32 Bram,PCI
1
47100.00
47100.00
1
60000.00
60000.00
15
12000.00
180000.00
VGA 1MB,VRAM,VGA MONOMonitor
1.2 GBHDD, 1.44 FDD, 101 Key Board
NE-2000 E-card
18
ZENITH INTEL P-II @ 266 MHZ
MHZ WITH MMX, 512 KB CACHE
INTEL 440 CX Chip Set 128 MB SD RAM
6.2 GB HDD, 1.44 FDD 64-Bits PCI VGA
with 2MB VRAM, 14” Svga Colour Monitor
32X CD-Ram, 32 Bit E-Card, Mouse
19
Nodes:486 -DX 66/4 MB RAM, VGA Card,
Mono Monitor, Key Board
20
NE - 2000 E-Cards
5
1150.00
5750.00
21
NE - 2000 E-Cards
4
1100.00
4400.00
22
Intel Pentium-233 MMX MXz 512 KB
15
26000.00
390000.00
Cache/32 MB SDRam/32Bit ENIU, 14”
SVGA NI Digital Colour Montitor/Mouse
& Pad/104 Key Board HCL BB Cel-433
Model/BVCB/10/21/2 HCL 14”HCL DiGital Colour VGA Monitor, E-Cards
23
10 KVA Stabilizer
1
11500.00
11500.00
24
10 KVA Godavari Stabilizer
3
13900.00
41700.00
25
1 KVA APC UPS
1
8300.00
8300.00
26
HP Brio BA400/HP14"colour monitor
30
36300.00
1089000.00
27
IBM Make PIV 2.66, 1 MB Cache, 256 DDR RAM, 80 GB
SATA HDD, 10/100 LAN, IBM Key Board, Optical Mouse,
15" TFT Monitor
5
33250.00
166250.00
28
ZENITH INTEL Pentium 4.28 GHz
16
19600.00
313600.00
45
13200.00
594000.00
1
38000.00
38000.00
OEM Mother Board, 256 MB DDR,
40 GB HDD, Combo Drive, Key Board,
Optical Scroll Mouse, ATX Silver & Black
15” Zenith Colour Monitor
29
Intel G31 chipset mother board,
1GB DDR RAM, 80 GB HDD,
Dual Core 2.0GHz, Keyboard, Mouse,
15" Color Monitor
30
Sony Make LCD Projector
Model: VPL - ES5 2000AS NSI
LUMESN SVGA
‐ 88 ‐ 31
Liberty Vision Over Head Projector
4
6000.00
24000.00
Model: 285 with Twin Lamp Facility
4581914.00
COMPUTER SCIENCE & ENGINEERING DEPARTMENT
IT WORKSHOP
S.No.
1
DESCRIPTION
QTY.
HCL BB, Celeron 433 Model
UNIT PRICE
AMOUNT
30
28000.00
840000.00
18
16148.00
290664.00
BVCB 10,21/2, HCL 14" Color VGA Monitor
10/2, 40 GB, Ethernet Cards
2
Pentium Dual Core 3.0 GHZ, 256 MB RAM, 80
GB HDD, on board LAN, 107 keys keyboard,
scroll mouse,15" colour monitor
Total
1130664.00
COMPUTER CENTER FOR ONLINE EXAMINATIONS
S.No.
1
2
3
4
DESCRIPTION
QTY.
Zenith Make PIV 2.66, 1 MB Cache, 256
DDR RAM, 80 GB SATA HDD, 10/100
LAN, IBM Key Board, Optical Mouse,
15" Monitor
IBM Make PIV 2.66, 1 MB Cache, 256
DDR RAM, 80 GB SATA HDD, 10/100
LAN, IBM Key Board, Optical Mouse,
15" Monitor
Pentium Dual Core 3.0 GHZ, 256 MB
RAM, 80 GB HDD, on board LAN, 107
keys keyboard, scroll mouse,15" colour
monitor
HP ML 350 G3 Xeron 2.8 GHZ,
2GBDDR, 4 X 72.8 SCSI HDD, Smart
Array 641 RAID Controller CISCO, 1751
Router CISCO, Swith RAD HTU-E1,
V.35 Modem RAD HTU-E1 G.703
Modem.
UNIT PRICE
AMOUNT
70
21800.00
1526000.00
3
26250.00
78750.00
58
16148.00
936584.00
1
504000.00
504000.00
5
D-Link 16 port switch
3
3050.00
9150.00
6
D-Link 24 port switch
1
5290.00
5290.00
7
D-Link 24 port switch
4
5750.00
23000.00
8
15KVA online UPS
2
160004.00
320008.00
Total
3402782.00
‐ 89 ‐ COMPUTER SCIENCE & ENGINEERING DEPARTMENT
C & DATA STRUCTURES LAB
S.No.
1
2
DESCRIPTION
Pentium Dual Core 3.0 GHZ, 256 MB
RAM, 80 GB HDD, on board LAN, 107
keys keyboard, scroll mouse,15" colour
monitor
QTY.
60
UNIT PRICE
16148.00
AMOUNT
968880.00
3475.00
13900.00
4
16 Port D - Link Switch
982780.00
TOTAL
SCIENCE & HUMANITIES DEPARTMENT
ENGLISH LANGUAGE COMMUNICATION SKILLS LAB
S.No.
1
2
3
DESCRIPTION
QTY.
IBM Make PIV 2.66, 1 MB Cache, 256
DDR RAM, 80 GB SATA HDD, 10/100
LAN, IBM Key Board, Optical Mouse, 15"
Monitor
Software by Place Mentor
(A Divison of Globarena)
16 Port D - Link Switch
UNIT PRICE
31
AMOUNT
26250.00
104000.00
2
3100.00
Total
SCIENCE & HUMANITIES DEPARTMENT
LIST OF EQUIPMENT AVAILABLE IN PHYSICS LAB
DESCRIPTION
6200.00
923950.00
S.NO.
813750.00
QTY.
UNIT PRICE
AMOUNT
1
Ammeter (0-1 Amp)
4 Nos.
210.00
840.00
2
Ammeter (0-5 Amp)
4 Nos.
210.00
840.00
3
Ammeter (0-10 Amp)
4 Nos.
240.00
960.00
4
Voltameter
4 Nos.
210.00
840.00
5
High Resistance (plag type)
4 Nos.
295.00
1180.00
6
Plug Key
12 Nos.
60.00
720.00
7
Magnometer
4 Nos.
575.00
2300.00
8
Bar Magnats
4 Nos.
115.00
460.00
9
Thermometers (0-110C)
4 Nos.
50.00
200.00
10
Cammutator
4 Nos.
135.00
540.00
11
Cay Posters Birdge
4 Nos.
595.00
2380.00
12
Resistance Box(1-10000)
6 Nos.
1275.00
7650.00
13
Resistance Box(1-10000)
2 Nos.
1450.00
2900.00
‐ 90 ‐ 14
Spectrometer
2 Nos.
3975.00
7950.00
15
Spectrometer
2 Nos.
4475.00
8950.00
16
Prisoms
6 Nos.
325.00
1950.00
17
Prisoms
2 Nos.
350.00
700.00
18
Magnifying lens
6 Nos.
23.00
138.00
19
Magnifying lens
2 Nos.
70.00
140.00
20
Grating
4 Nos.
875.00
3500.00
21
Grating
1 Nos.
3600.00
3600.00
22
Grating
1 Nos.
3600.00
3600.00
23
Transformar (S.Lamp)
2 Nos.
795.00
1590.00
24
Transformar (S.Lamp)
1 Nos.
650.00
650.00
25
Sonometer
4 Nos.
575.00
2300.00
26
Sonometer
2 Nos.
695.00
1390.00
27
Weight Ranger
6 Nos.
150.00
900.00
28
Weight Ranger
2 Nos.
225.00
450.00
29
Meldis Experiment
4 Nos.
975.00
3900.00
30
Travelling Microscope
2 Nos.
2875.00
5750.00
31
Travelling Microscope
2 Nos.
2875.00
5750.00
32
Convex lens
6 Nos.
38.00
228.00
33
Plano Conveylens
6 Nos.
15.00
90.00
34
Convex lens
2 Nos.
160.00
320.00
35
Retort Stand
8 Nos.
225.00
1800.00
36
Compound Pendulum
4 Nos.
295.00
1180.00
37
Eleminator (meldis)
4 Nos.
750.00
3000.00
38
Eleminator (meldis)
2 Nos.
460.00
920.00
39
Standard Resistance 1ohm
4 Nos.
25.00
100.00
40
Standard Resistance 5ohm
4 Nos.
25.00
100.00
41
Galvanometer
4 Nos.
220.00
880.00
42
Stewart & Gee’s App
2 Nos.
1450.00
2900.00
43
Tuming fork
2 Nos.
330.00
660.00
44
Tuming fork
2 Nos.
495.00
990.00
45
Tuming fork
3 Nos.
408.00
1224.00
46
Torsion Pendulum
3 Nos.
450.00
1350.00
47
Torsion Pendulum
1 Nos.
450.00
450.00
48
Torsion Pendulum
3 Nos.
450.00
1350.00
49
Biprism
1 Nos.
4800.00
4800.00
50
Fresnel Biprism
1 Nos.
295.00
295.00
51
Vernior Calipers
6 Nos.
145.00
870.00
52
Screw Gauge
6 Nos.
95.00
570.00
53
Screw Gauge
2 Nos.
145.00
290.00
54
Spherometre
6 Nos.
105.00
630.00
55
Meter Scales
10 Nos.
45.00
450.00
56
Halt Meter Scales
10 Nos.
30.00
300.00
‐ 91 ‐ 57
Step Down Transformer
4 Nos.
475.00
1900.00
58
Step Down Transformer
2 Nos.
830.00
1660.00
59
Rubber Hamers
6 Nos.
40.00
240.00
60
Rubber Hamers
2 Nos.
50.00
100.00
61
Rubber Hamers
3 Nos.
95.00
285.00
62
Weight Box
2 Nos.
190.00
380.00
63
Weight Box
1 Nos.
175.00
175.00
64
Weight Box
1 Nos.
190.00
190.00
65
Fractional Weight
6 Nos.
25.00
150.00
66
Physical Balance
1 Nos.
1495.00
1495.00
67
Electromagnets
6 Nos.
150.00
900.00
68
Reading telescopes
4 Nos.
1650.00
6600.00
69
Stopwatches
6 Nos.
1400.00
8400.00
70
Torchlights
2 Nos.
32.00
64.00
71
Torch lights
1 Nos.
130.00
130.00
72
Blood testing Microslides
40 Nos.
1.00
40.00
73
Spirit level
6 Nos.
15.00
90.00
74
Rheostat
4 Nos.
425.00
1700.00
75
Electromagnets
2 Nos.
175.00
350.00
76
Electromagnets
4 Nos.
175.00
700.00
77
Sodium lap house wodem
1 Nos.
800.00
800.00
78
Screw Driverkit
1 Nos.
110.00
110.00
79
Wire Cutter
1 Nos.
25.00
25.00
80
Cutting player
1 Nos.
65.00
65.00
81
Scissors
2 Nos.
19.25
39.50
82
Magnifying lens
2 Nos.
60.00
120.00
83
Convex lens
2 Nos.
20.00
40.00
84
Stop watches
1 Nos.
400.00
400.00
85
Tunning Fork
6 Nos.
4 Nos.
80.00
60.00
720.00
Total
128633.50
LIST OF EQUIEPMENT AVAILABLE IN ADMINISTRATIVE OFFICE
S.No.
1
DESCRIPTION
Ricoh Multi Functional Device
QTY.
UNIT PRICE
AMOUNT
1
335000.00
335000.00
1
165000.00
165000.00
1
124800.00
124800.00
2
114400.00
228800.00
Model: Aficio MP 4000B with ARDF & SWK
2
Ricoh Multi Functional Device
Model: Aficio 2018D with ARDF & SWK
3
Ricoh Multi Functional Device
Model: Aficio MP 2000L with ARDF & SWK
4
Ricoh Multi Functional Device
‐ 92 ‐ Model: Aficio MP 2000L without ARDF & SWK
5
SONY VPL ES2 LCD, 1500 ANSI
1
60000.00
60000.00
1
160596.00
160596.00
1
138995.00
138995.00
1
50900.00
50900.00
1
18500.00
18500.00
LUMENES SVGA, 4500 hours high lamp
life, 80-100 people capacity.
6
7
8
9
MODI MAKE XROX MACHNIES
5834 LV
MODI MAKE XROX MACHNIES
5834 LV
2 KVA ONLINE UPS
POWER GUARD MAKE
GUESTNER DUPLICATING MACHINE
MODEL 145
10
HP 1200 LASER JET PRINTERS
2
21000.00
42000.00
11
GODREJ TYPE WRITER
1
10000.00
10000.00
12
EZ School Soft Ware
67000.00
67000.00
13
RICOH Digital Copier
1
117500.00
117500.00
Model: Oficiso 2018D with Printer/Scanner
ARDF, Duplex and Startup Kit
14
4KVA Stabilizor
1
4500.00
4500.00
15
Over Head Projector with Screen
1
12600.00
12600.00
16
Over Head Projector with Screen
Cease Fire Equipment(ABC Map SP 90 FE 2kg &
5kg
Dustbins
4
6100.00
24400.00
17
18
23
85202.00
6
2000.00
Total
12000.00
1657793.00
SPORTS & GAMES
LIST OF EQUIEPMENT AVAILABLE IN GYM
S.No.
DESCRIPTION
QTY.
UNIT PRICE
AMOUNT
1
Abdomen Bench
1
2300.00
2300.00
2
Belly Roller
1
17000.00
17000.00
3
Bench Press
1
13000.00
13000.00
4
Ex ercycle
1
4500.00
4500.00
5
Forearm Machine
1
5500.00
5500.00
6
Peck Deck Machine
1
18500.00
18500.00
7
Rowing Machine
1
6000.00
6000.00
8
Ski - Stepper
1
6000.00
6000.00
9
Treadmill Motorised (Variable)
1
44500.00
44500.00
10
Tummy Vibrator
1
13000.00
13000.00
11
Twister Double
1
5000.00
5000.00
‐ 93 ‐ 12
Wall Pulley
1
12500.00
12500.00
13
Horizontal Bar
1
2500.00
2500.00
14
Parallel Bar
1
1500.00
1500.00
15
Weight lifting plates with rods
1
2235.00
2235.00
16
Weighing Machine
1
640.00
640.00
17
Bull Worker
1
376.00
376.00
18
Chest Expensor
1
150.00
150.00
19
Dumbles
4
1426.00
1426.00
Total
156627.00
LIST OF EQUIPMENT AVAILABLE FOR SPORTS & GAMES
1
T.T. Table
1
13042.00
13042.00
2
Shot Puts
1
192.00
192.00
1
144.00
144.00
2
125.00
250.00
1
75.00
75.00
1
180.00
180.00
5
Hammer Throw
High Jump with cross
bar
1
950.00
950.00
6
Javalin Throws
4
65.00
260.00
7
Cricket Mat
1
2700.00
2700.00
8
Basket Ball Boards
2
3780.00
7560.00
9
Shuttle Poles
1 set
1281.00
1281.00
3
4
Discuss Throws
Total
26634.00
Grand Total
‐ 94 ‐ 183261.00
¾
List of Experimental Setup MD ENCLOSURE ‐ III COMPUTING FACILITIES: ¾ Number and Configuration of Systems ¾ Total number of systems connected by LAN ¾ Total number of systems connected to WAN Internet bandwidth 760 500 500 2 Mbps bandwidth Internet Connectivity through
TulipIT Services. ¾ Major software packages available Microsoft Academic Alliance, Macro Media Flash, MSDN Subscription, IBM Rational Rose, Oracle 10G, Embedded Systems Kit ¾ Special purpose facilities available LCD, OHP, Conference Hall WORKSHOP: List of facilities available. ¾ Games and Sports Facilities • A full time qualified PET is available. • Facilities like Cricket play ground, basket ball court, Volleyball court are available to play out door games. An indoor gymnasium is available for shuttle badminton and GYM facilities. Indoor games like Chess, Caroms etc. are also conducted here. Extra Curriculum Activities • College day is conducted once in every year were the students participate in singing, dancing and various stage performances like mime, dramas etc. An indoor auditorium which can accommodate 500 students at a time is available for conducting co‐curricular and extra co‐curricular activities apart from an AC Seminar Hall with an accommodation of 200 members. Soft Skill Development Facilities • A well equipped English software lab is available Number of Classrooms and size of each • 36 Class rooms of each having 70.27 sqm. are available Number of Tutorial rooms and size of each • 12 Tutorial halls of each having 49.11 sqm Number of laboratories and size of each ‐ 95 ‐ • 30 laboratories as per The JNT Syllabus are available with 128.56 sqm Number of drawing halls and size of each • 4 Drawing halls of each having 171.406 sqm Number of Computer Centres with capacity of each • 6 computer centres with size of 105.13 sqm Central Examination Facility, Number of rooms and capacity of each. • An online examination centre with a size 162 sqm which can accommodate 90 students at a time is available ‐ 96 ‐ Teaching Learning process ¾ Curricula and syllabi for each of the programmes as approved by the University. Printed syllabus copies of affiliated JNT University course wise are enclosed (20 Books) ¾ Academic Calendar of the University The Academic Calender for B.Tech. II, III & IV Year – I Semeter and II Semester during the Year 2008‐2009 II, III, IV Year B.Tech. – I Semester (2008‐2009): Instructions : 23‐06‐2008 to 23‐08‐2008(9 W) Intra Semester Break& Supplementary Examinations of II – II & III ‐ II B.Tech. : 24‐08‐2008 to 07‐09‐2008 Instructions Contd. : 08‐09‐2008 to 01‐11‐2008(8 W) Preparation & Practicals End Examinations : 10‐11‐2008 to 22‐11‐2008 : 03‐11‐2008 to 08‐11‐2008 II, III, IV Year B.Tech. – II Semester (2008‐2009): Instructions : 01‐12‐2008 to 31‐01‐2009(9 W) Intra Semester Break& Supplementary Examinations of II – I , III – I, IV ‐ I B.Tech. : 01‐02‐2009 to 15‐02‐2009 Instructions Contd. : 16‐02‐2009 to 11‐04‐2009(8 W) Preparation & Practicals End Examinations : 20‐04‐2009 to 02‐05‐2009 Summer Vacation : 03‐05‐2009 to 22‐06‐2009 ‐ 97 ‐ : 13‐04‐2009 to 18‐04‐2009 Commencement of Class Work for II, III & IV Year – I Semester : 23‐06‐2009 B.Tech. I Year(Regular) 2008‐2009 To be received by JNTU – the concerened affiliated university as on this date.
‐ 98 ‐ ¾
Academic Time Table DEPARTMENT OF ELECTRICAL & ELECTRONICS ENGINEERING II B‐Tech, I‐SEM EEE 1 2 3 4 5 6 7 8 9.00‐9.50 9.50‐10.40 10.40‐11.30 11.30‐12.20 1.10‐2.00 2.00‐2.50 2.50‐3.40 3.40‐4.30 MON EM‐I STLD EMF M‐III PDC FM&HM LIB TUE STLD EM‐I M‐III EMF WED EMF APT FM&HM PDC STLD INT EM‐I THU APT FM&HM PDC EMF COMM STLD M‐III FRI M‐III EM‐I FM&HM PDC SAT PDC FM&HM STLD EM‐I REMIDIAL CLASSES DAY/PER EC/FM&HM LAB EC/FM&HM LAB M‐III EMF SEM LUNCH ‐‐ 12.20 – 1.10PM III B‐Tech, I‐SEM EEE 1 2 3 4 5 6 7 9.00‐9.50 9.50‐10.40 10.40‐11.30 11.30‐12.20 12.20‐1.10 2.00‐2.50 2.50‐3.40 3.40‐4.30 MON MEAS CO EM‐III PS‐II LDSA PE LIB TUE LDSA MEAS PS‐II PE EM‐III MEAS SEM WED APT CO PS‐II LDSA COMM EM‐III PE MEAS FRI PS‐II PE EM‐III CO SAT MEAS PE LDSA PS‐II GATE 0 DAY/PE
R THU EM‐II/CS LAB LDSA CO INT EM‐II/CS LAB COMM CO EM‐III LUNCH‐‐ 1.10 TO 2.00PM IV B‐Tech, I‐SEM EEE DAY/ PER 0 1 9.00‐9.50 9.50‐10.40 2 3 4 5 6 7 10.40‐11.30 11.30‐12.20 12.20‐1.10 2.00‐2.50 2.50‐3.40 3.40‐4.30 PSD PSA SEM NCES PSOC EDS PROJ TUE NNA PSA EDS PSD WED THU GATE MON PSOC SPICE/MP LAB SPICE/MP LAB EDS NCES NNA PSD EDS NNA NCES APT PSA PSOC FRI PSA PSD PSOC NNA NCES APT INT SAT EDS NCES PSD PSA PSOC NNA SEM ‐ 99 ‐ LUNCH‐‐ 1.10 TO 2.00PM ‐ 100 ‐ DEPARTMENT OF MECHANICAL ENGINEERING II B.Tech. I Sem. 1
2
3
4
5
6
7
8
(9.00 AM-
(9.50 AM-
(10.40 AM-
(11.30 AM-
(1.10 PM-
(2.00 PM-
( 2.50 PM-
(3.40 PM-
9.50 AM)
10.40 AM)
11.30 AM)
12.20 PM)
2.00 PM)
2.50 PM)
3.40 PM)
4.30 AM)
MON
MMS MOS OOPS EE INT. LAB PD PT TUE
MOS TD EE MMS WED
TD OOPS APT MMS THURS
PT APT OOPS TD FRI
EE MOS COM. SKILLS OOPS MMS PT TD SAT
OOPS PT EE SEMINAR EE MOS MMS 1
2
3
4
5
6
7
8
(9.00 AM-
(9.50 AM-
(10.40 AM-
(11.30 AM-
(12.20 PM-
(2.00 PM-
( 2.50 PM-
(3.40 PM-
9.50 AM)
10.40 AM)
11.30 AM)
12.20 PM)
1.10 PM)
2.50 PM)
3.40 PM)
4.30 AM)
TE‐II PT DMM‐I KOM KOM DMM‐I HMS MEFA PT HMS SEMINAR MEFA HMS MEFA DMM‐I KOM COM. SKILLS PT SEMINA
R DMM‐I TE‐II KOM TE‐II HMS SKILL TEST MEFA MEFA TE‐II HMS PT DMM‐I KOM LIB. DAY /
HOURS
EE / OOPS LAB
PT MOS LIB EE / OOPS LAB
REMIDIA
L CLASSES
III YEAR –I SEM
DAY /
HOURS
TUE
WED
THURS
FRI
SAT
GATE COUN GUIDENCE MON
‐ 101 ‐ FM & HM/ PT LAB
TE‐II APT PT FM & HM/ PT LAB
IV YEAR –I SEM
1
2
3
4
5
6
7
8
(9.00 AM-
(9.50 AM-
(10.40 AM-
(11.30 AM-
(12.20 PM-
(2.00 PM-
( 2.50 PM-
(3.40 PM-
9.50 AM)
10.40 AM)
11.30 AM)
12.20 PM)
1.10 PM)
2.50 PM)
3.40 PM)
4.30 AM)
PPE ICS OR MCT SEMINA
R DAY /
HOURS
INT./ CAD/ MON
PROJECT CAM CAD/ R&AC TUE
THURS
FRI
GATE COUN GUIDENCE WED
MCT OR CAD/CAM/ MCT/ PDP LAB
CAM CAD/ MCT R&AC ICS APT PPE CAM SEMINA
R CAD/ OR R&AC ICS OR OR CAD/CAM/ MCT/ PDP LAB
CAM CAD/ PPE MCT ICS R&AC CAM INT./ ICS APT MCT R&AC PPE PPE PROJECT ‐ 102 ‐ DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING II B.Tech. I Sem. – SECTION: A PTSP TUE SS WED M‐III THU ES 10‐40to 11‐30 11‐30to 12‐20 12‐20to 1‐10 ECA/ET LAB PTSP ES M‐III ECA/ET LAB COMM
SS ECA SKILL 1‐10 to 2‐
00 2‐00to 2‐50 2‐50to 3‐40 ET APT ES ECA APT ET ET ECA SS PTSP M‐III SEM FRI ET PTSP LIB M‐III ES SS ECA SAT ECA ES ET SS M‐III INT PTSP 340 to 4‐30 REMIDIAL CLASSES MON 9‐50 to 10‐40 LUNCH Day 9‐00to 9‐50 II B.Tech. I Sem. – SECTION: B 9‐00to 9‐50 9‐50 to 10‐40 10‐40 to 11‐30 11‐30to 12‐20 MON ET M‐III ES PTSP TUE ES WED ECA PTSP M‐III ES THU PTSP ET LIB SS FRI M‐III SAT SS 12‐00to 1‐10 LUNCH ECA/ET LAB ECA/ET LAB ET ECA COMM SKILL ‐ 103 ‐ 1 ‐10 to 2‐00 2‐00to 2‐50 2‐50to 3‐40 SS ECA APT APT SS PTSP INT SS ET M‐III ECA SEM ET ECA ES PTSP ES M‐III 340 to 4‐30 REMIDIAL CLASSES Day III B.Tech. I Sem. – SECTION: A 9‐00 to 9‐50 to 9‐50 10‐40 Day 10‐40 to 11‐30 11‐30 to 12‐20 12‐20to 1‐10 1‐10 to 2‐00 2‐00to 2‐50 2‐50 to 3‐40 340 to 4‐30 APT DICA MEFA AWP DC LICA CO TUE DC CO AWP LIB DICA MEFA SEM WED THU SKILL DICA AWP DC/LICA LAB DC LICA LICA CO MEFA TEST LUNCH GATE CLASSES MON DC/LICA LAB FRI CO MEFA INT DICA AWP DC LICA SAT LICA DC MEFA COMM SKILL CO AWP DICA III B.Tech. I Sem. – SECTION: B 9‐00to 9‐50 9‐50 to 10‐40 to 10‐40 11‐30 CO TUE MEFA WED THU FRI GATE CLASSES MON AWP 11‐30 to 12‐20 12‐20to 1‐10 LICA DICA 1‐10 to 2‐00 DC/LICA LAB DC MEFA DICA LIB LICA CO AWP DC DICA DC/LICA LAB LUNCH Day 2‐00to 2‐50 2‐50 to 3‐40 340 to 4‐30 MEFA APT DC DC INT LICA AWP CO SEM MEFA SKILL TEST DICA LICA CO AWP DICA LICA MEFA COMM
SAT AWP CO DC SKILL ‐ 104 ‐ IV B.Tech. I Sem. – SECTION: A 11‐30 to 12‐20 12‐20to 1‐10 MON RS DIP OC EMI TUE EMI CN SEM DIP TV INT RS CN THU FRI SAT DIP MW&OC/DSP LAB 1‐10 to 2‐00 2‐00to 2‐50 2‐50 to 3‐40 340 to 4‐30 MW&OC/DSP LAB LUNCH 10‐40 to 11‐30 WED 9‐00to 9‐50 GATE CLASSES 9‐50 to 10‐40 Day RS TV OC EMI OC DIP CN OC TV APT OC TV RS EMI LIB CN CN TV APT SEM RS DIP EMI 2‐00to 2‐50 2‐50 to 3‐40 340 to 4‐30 IV B.Tech. I Sem. – SECTION: B 11‐30 to 12‐20 12‐20to 1‐10 MON OC SEM INT TV DIP CN EMI TUE CN DIP LIB OC TV EMI RS EMI OC TV RS TV EMI RS SEM RS APT DIP CN DIP EMI CN APT THU FRI SAT ‐ 105 ‐ 1‐10 to 2‐00 LUNCH 10‐40 to 11‐30 WED 9‐00to 9‐50 GATE CLASSES 9‐50 to 10‐40 Day MW&OC/DSP LAB OC DIP CN MW&OC/DSP LAB OC TV RS DEPARTMENT OF COMPUTER SCIENCE & ENGINEERING II B.Tech. I Sem. – SECTION: A MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
9.00-9.50
9.50-10.40
MFCS
Aptitude
ADS
UNIX
P&S
MEFA
P&S
10.40-11.30
11.30-12.20
Aptitude
MEFA
ADS/UNIX LAB
P&S
CommnSkill
DLD
P&S
UNIX
MEFA
DLD
SEMINAR
MFCS
MEFA
ADS
ADS
1.10-2.00
ADS
MEFA
LUNCH
DAY
DLD
DLD
UNIX
2.00-2.50
2.50-3.40
UNIX
DLD
MFCS
UNIX
ADS/UNIX LAB
MFCS
ADS
MFCS
Library
P&S
Internet
II B.Tech. I Sem. – SECTION: B MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
9.00-9.50
UNIX
P&S
MEFA
MFCS
ADS
DLD
9.5010.40
MFCS
Aptitude
ADS
MEFA
UNIX
10.40-11.30
11.30-12.20
P&S
Aptitude
UNIX
CommnSkill
MFCS
UNIX
ADS/UNIX LAB
DLD
SEMINAR
P&S
MEFA
‐ 106 ‐ 1.10-2.00
LU NCH
DAY
DLD
MFCS
P&S
MEFA
2.00-2.50
2.50-3.40
ADS
MEFA
ADS
DLD
DLD
Internet
P&S
UNIX
ADS/UNIX LAB
ADS
MFCS
LIBRARY
III B.Tech. I Sem. – SECTION: A 9.50-10.40
10.40-11.30
11.30-12.20
12.20-1.10
MONDAY
OS
Aptitude
OOAD
FLAT
TUESDAY
CN
FLAT
MEFA
COMM.SKILL
PPL
OS
OS
MEFA
FLAT
PPL
CN
PPL
OOAD
OOAD
MEFA
Internet
FLAT
MEFA
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
SKILL
TEST
PPL
2.002.50
LU NCH
DAY
2.503.40
3.40-4.30
UML/CN&OS LAB
UML/CN&OS LAB
Library
OOAD
OOAD
MEFA
OS
CN
OS
CN
CN
FLAT
PPL
SEMINAR
III B.Tech. I Sem. – SECTION: B MONDAY
TUESDAY
2.00-2.50
2.503.40
3.404.30
PPL
CN
OOAD
OS
MEFA
COMM
SKILL
CN
PPL
MEFA
FLAT
PPL
9.50-10.40
10.40-11.30
11.30-12.20
12.20-1.10
MEFA
FLAT
Aptitude
OOAD
WEDNESDAY
OS
THURSDAY
FRIDAY
SATURDAY
FLAT
PPL
CN
OS
FLAT
UML/CN&OS LAB
OOAD
SKILL TEST
MEFA
CN
CN
PPL
OS
MEFA
OOAD
‐ 107 ‐ LU NCH
DAY
UML/CN&OS LAB
Internet
Seminar
FLAT
OS
OOAD
Library
IV B.Tech. I Sem. – SECTION: A 9.50-10.40
10.40-11.30
11.30-12.20
12.20-1.10
2.00-2.50
DMDW
WT
MM&AD
SPM
ES
ACA
ACA
Aptitude
MM&AD
SPM
WT/ES LAB
ACA
SEMINAR
ES
WT
MM&AD
SPM
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
ES
MM&AD
LIBRARY
WT
ACA
DMDW
LU NCH
DAY
MONDAY
TUESDAY
2.50-3.40
ES
WT/ES LAB
SPM
Aptitude
MM&AD
DMDW
DMDW
ES
SPM
WT
3.40-4.30
Internet
DMDW
ACA
WT
Project
IV B.Tech. I Sem. – SECTION: B 9.50-10.40
10.40-11.30
11.30-12.20
12.20-1.10
MONDAY
TUESDAY
WT
MM&AD
ES
DMDW
ACA
SPM
MM&AD
ES
SPM
SEMINAR
SPM
ES
ES
Aptitude
DMDW
MM&AD
DMDW
WT
SPM
ACA
WT
ACA
WT
Internet
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
‐ 108 ‐ 2.00-2.50
LU NCH
DAY
2.50-3.40
WT/ES LAB
SPM
WT
APTITUDE MM&AD
WT/ES LAB
MM&AD
Library
ACA
DMDW
3.404.30
DMDW
ACA
ES
Project
DEPARTMENT OF INFORMATION TECHNOLOGY
II B.Tech. I Sem.
DAY
9.00-9.50
9.50-10.40
10.40-11.30
MEFA
TUE
MFCS
MEFA
ADS
WED
Aptitude
UNIX
THU
ADS
DLD
FRI
DLD
SAT
P&S
1.10-2.00
ADS/UNIX LAB
2.50-3.40
P&S
Library
DLD
UNIX
P&S
DLD
P&S
MEFA
Comm
Skill
MFCS
ADS
Aptitude
MFCS
UNIX
Internet
MEFA
UNIX
ADS
P&S
MEFA
DLD
UNIX
ADS/UNIX LAB
ADS
2.00-2.50
MFCS
LUNCH
MON
11.30-12.20
Seminar
MFCS
III B.Tech. I Sem.
9.009.50
9.5010.40
10.40-11.30
12.201.10
11.30-12.20
CN
TUE
Aptitude
MEFA
WT
CN
MEFA
OOAD
OS
ACD
WT
OOAD
ACD
MEFA
OS
OOAD
SEMINAR
CN
WED
THU
FRI
GATE CLASSES
MON
WT/UML LAB
ACD
WT
OS
SAT
2.00-2.50
00AD
LUNCH
DAY
2.50-3.40
3.40-4.30
Comm Skill
ACD
MEFA
OS
OOAD
Internet
skill test
WT
CN
CN
library
OS
WT/UML LAB
WT
MEFA
ACD
IV B.Tech. I Sem.
TUE
WED
THU
FRI
9.5010.40
10.40-11.30
11.30-12.20
12.201.10
2.00-2.50
2.50-3.40
3.40-4.30
ES
ACC
IRS
MC
MM&AD
SEMIN
AR
SPM
SPM
LIBRARY
ACC
IRS
ES
MM&AD
MC
IRS
MMAD
MC
SPM
ACC
ES
INTERNET
LUNCH
MON
9:00-9:50
GATE CLASSES
DAY
MC
MM&AD/ES LAB
ES
SPM
IRS
MMAD
MM&AD/ES LAB
APTITUDE
ACC
SEMINAR
‐ 109 ‐ SAT
¾
Aptitude
Test
ACC
IRS
MC
SPM
ES
MMAD
Teaching Load of each Faculty Teaching Load for A.Y.2008‐2009 (I Semester) DEPT. OF ELECTRICAL & ELECTRONICS ENGINEERING Work Load
Sl.
No.
Name
Designation
Total
Theory
Lab
Professor & Head
5
6
11
1
Prof. J.V.G.Rama Rao
2
S.Srikanth
Associate Professor
10
6
16
3
M.Srinivasa Rao
Associate Professor
10
6
16
4
J Satish Babu
Assistant Professor
10
6
16
5
A Hari Babu
Assistant Professor
5
6
11
6
K.Kishore Kumar
Assistant Professor
10
3
13
7
D.N.V.V.R.L. Rajesh
Assistant Professor
10
3
13
8
TVVSS
Subrahmanyeswara Rao
Assistant Professor
10
--
10
9
A Rama Krishna
Assistant Professor
5
6
11
10
B Vijaya Kumar
Assistant Professor
5
6
11
11
B Ranga Naik
Assistant Professor
10
6
16
12
G V V S Narayana
Assistant Professor
5
6
11
13
V V D Prasad Reddy
Assistant Professor
5
6
11
14
T Sireesha
Assistant Professor
5
6
11
15
U L P Chandirka
Assistant Professor
5
6
11
16
Satya Venkata Prasad G
Assistant Professor
--
6
6
‐ 110 ‐ project
DEPT. OF MECHANICAL ENGINEERING Work Load
Sl.
No.
Name
Designation
Total
Theory
Lab
1
Prof.G.V.N.S.R. Ratnakara Rao
Professor
6
--
6
2
Dr. D.S.V. Prasad
Professor
11
6
17
3
A. Ramakrishna
Associate Professor &
Head
5
6
11
4
D.Santha Rao
Associate Professor
11
6
17
5
B.V.Rajesh
Assistant Professor
--
--
--
6
Y V Ramana Murthy
Assistant Professor
5
6
11
7
G Narasa Raju
Assistant Professor
11
6
17
8
B Srinivas
Assistant Professor
11
6
17
9
S. Venkateswara Rao
Assistant Professor
12
6
18
10
G Venkateswara Rao
Assistant Professor
11
6
17
11
K Sri Rama Murthy
Assistant Professor
6
6
12
12
K Suresh
Assistant Professor
--
12
12
13
Sunita Devi K G Patnam
Assistant Professor
--
--
--
14
Phani Sowjanya Geddada
Assistant Professor
--
--
--
‐ 111 ‐ DEPT. OF ELECTRONICS & COMMUNICATION ENGINEERING Work Load
Sl.
No.
Name
Designation
Total
Theory
Lab
1
Dr.G.M.V.Prasad
Principal
5
--
5
2
Dr. N S Murthy Sarma
Professor
10
6
16
3
V. Dhana Raj
Associate Professor &
Head
10
6
16
4
A.Pravin
Associate Professor
5
12
17
5
E Nageswara Rao
Associate Professor
5
12
17
6
Ch Sreedevi
Associate Professor
5
12
17
7
S Koteswara Rao
Associate Professor
10
12
22
8
T Neelima
Assistant Professor
5
12
17
9
K. Rajasekhar
Assistant Professor
10
6
16
10
Saladi Kanaka Durga
Assistant Professor
5
12
17
11
G. Balasubrahmanyam
Assistant Professor
8
12
20
12
N.Srinivasa Rao
Assistant Professor
8
12
20
13
B V V Satyanararayana
Assistant Professor
10
6
16
14
Y N Raghunath Babu
Assistant Professor
10
6
16
15
P V V Durga Rao
Assistant Professor
8
9
17
16
K Ravi Babu
Assistant Professor
10
6
16
17
Ch Raja Sekhar
Assistant Professor
10
6
16
18
K V Srinivas
Assistant Professor
5
6
11
19
Ch Anjaneyulu
Assistant Professor
5
12
17
20
Durga Rayudu
Assistant Professor
5
6
11
21
S V S N Murthy
Assistant Professor
5
6
11
22
T S S Phani
Assistant Professor
10
3
13
23
P Harika
Assistant Professor
5
9
14
24
Ch V S Subrahmanyam
Assistant Professor
10
6
16
25
B Usha Monika
Assistant Professor
5
9
14
26
B Chiranjeevini Kumari
Assistant Professor
5
6
11
‐ 112 ‐ DEPT OF COMPUTER SCIENCE ENGINEERING Sl.
No.
Work Load
Name
Designation
Total
Theory
Lab
1
Dr. Gunamani Jena
Professor & Head
5
6
11
2
Prof. P M Prasuna
Professor
5
6
11
3
P Suresh Babu
Associate Professor
10
12
22
4
T.V.S. Krishna
Associate Professor
10
6
16
5
V.S. Rama Krishna
Associate Professor
10
6
16
6
N Krishnaiah
Associate Professor
10
6
16
7
R V Satyanarayana
Assistant Professor
10
12
22
8
N.Chandra Kala
Assistant Professor
5
6
11
9
P.B.V. Raja Rao
Assistant Professor
10
12
22
10
K Sumathi Devi
Assistant Professor
12
6
18
11
B.P.N. Madhu Kumar
Assistant Professor
10
12
22
12
M V R Narasimha Rao
Assistant Professor
5
6
11
13
Y M S D Sastry
Assistant Professor
10
6
16
14
R Naga Prasad
Assistant Professor
5
6
11
15
Y Ravi Raju
Assistant Professor
5
6
11
16
Ch. Surya Kiran
Assistant Professor
--
8
8
17
T Prabhakara Rao
Assistant Professor
--
6
6
18
D. Hari Babu
Assistant Professor
--
6
6
19
K Murali Krishna
Assistant Professor
--
6
6
20
K Niharika
Assistant Professor
5
--
5
21
Ch Durga Prasad
Assistant Professor
--
6
6
22
V Joseph Raju
Assistant Professor
--
6
6
‐ 113 ‐ DEPT OF INFORMATION TECHNOLOGY Sl.
No.
Work Load
Name
Designation
Total
Theory
Lab
Professor
10
6
16
1
Dr. R John Mathew
2
K Srinivas
Associate Professor
& Head
5
6
11
3
T. Srinivasa Rao
Associate Professor
10
6
16
4
B Satyanarayana Murthy
Assistant Professor
10
6
16
5
M. Prasad
Assistant Professor
10
6
16
6
G Sasi Bhushana Rao
Assistant Professor
10
6
16
7
K V B Hanuma
Assistant Professor
10
6
16
8
A. Naga Venkateswara Rao
Assistant Professor
5
6
11
9
B Sirisha
Assistant Professor
5
6
11
10
Saladi Kousalya Devi
Assistant Professor
5
6
11
11
K Sri Latha
Assistant Professor
10
6
16
12
P Amaravathi
Assistant Professor
--
12
12
‐ 114 ‐ DEPT OF SCIENCE & HUMANITIES Work Load
Sl.
No.
Name
1
Prof. T.V. Janardhana Rao
2
Designation
Total
Theory
Lab
Professor & Head
15
--
15
B.Hema Sundar Raju
Associate Professor
10
--
10
3
S. Abdul Sattar
Associate Professor
10
--
10
4
G.B.Chandra Mouli
Associate Professor
10
--
10
5
S.Rama Krishna
Assistant Professor
15
--
15
6
N V Somyajulu Josyula
Assistant Professor
14
--
14
7
S Tatayya Naidu
Assistant Professor
10
6
16
8
N Phani Kumar
Assistant Professor
10
--
10
9
A Naveen Chandra
Assistant Professor
14
--
14
10
M S S Bharathi
Assistant Professor
10
--
10
11
M H S Padma
Assistant Professor
14
--
14
12
K Ramesh Babu
Assistant Professor
14
--
14
13
G S V Prasad
Assistant Professor
12
--
12
14
Y Anuradha
Assistant Professor
15
--
15
15
A Durga Prasad
Assistant Professor
10
--
10
‐ 115 ‐ ¾
Internal Continuous Evaluation System in place As per JNTU norms : For III & IV B.Tech. 2008‐09 per semester • For theory subject, during the semester there shall be 4 tests which include, 2 objective type tests each for a duration of 20 minutes each and 2 subjective type tests each for a duration of 90 minutes each. One objective type test and one subjective test to be conducted in 1 – 4 units and one objective type test and one subjective type test are to be conducted in 5 – 8 units of each semester. The best 3 tests well be considered for awarding 20 sessional marks. For I & II B.Tech.‐ 2008‐09 • From 2005‐2006 academic year for theory subjects, during the semester there shall be 4 tests, which include, 2 objective type tests each for a duration of 20 minutes each and 2 subjective type tests each for a duration of 90 minutes each. One objective type test and one subjective test to be conducted in 1‐4 units and one objective type test and one subjective type test are to be conducted in 5‐8 units of each semester. The best 3 tests will be considered for awarding 20 sessionals marks. For the I year class which shall be on yearly basis, there shall be 6 tests which include, 3 objective type tests and 3 subjective type tests with the same duration and weightage for each test as mentioned above. However, the performance in the best 4 tests will be considered for awarding 20 sessional marks. The distribution of syllabus for the conduct of objective and subjective type tests in the first year shall be as follows: 1 – 2 Units one Objective type and one subjective type test. 3 – 5 one objective type and one subjective type test. 6 – 8 Units one objective type and one subjective type test. Each objective test question paper shall contain 20 objective type questions for 20 marks. Each subjective type test question paper shall contain 5 questions out of which any 3 questions need to be answered. The subjective type question paper should also be for 20 marks. Though the test pattern is different, all the tests (objective and subjective type tests) have equal weightage. For practical subjects there shall be a continuous evaluation during the semester for 25 sessional marks and 50 end examination marks. Of the 25 marks for internal, 15 marks shall be awarded for day‐to‐day work and 10 marks to be awarded by conducting an internal laboratory test. The end examination shall be conducted by the teacher concerned and another member of the staff of the same department. ‐ 116 ‐ ¾ Students’ assessment of Faculty, System in place. Feedback from the students is taken for every semester/year in a prescribed format which shown below and measures are taken to improve the teaching learning process. B V C ENGINEERING COLLEGE ODALAREVU – 533 210 STUDENT FEEDBACK FORM NAME OF THE STUDENT : ROLL NO. SEMESTER : I / BRANCH : II / III / IV _____ 1. This form is to evaluate your teacher. Please read the evaluation criteria carefully. 2. Rate your Teacher by marking a ‘√‘ in the appropriate box that very nearly indicates the performance of your Teacher. 3. While rating, you should be honest and truthful. 4. The Feedback given by you will be kept confidential. NAME OF THE TEACHER : SUBJECT : 1. He / She is able to explain the concepts in clear and simple language. Goo
Very Good d Averag
e 2. He / She presents relevant examples, pictures, models etc., of the subject. ‐ 117 ‐ Not Satisfactory Goo
Very Good d Averag
e Not Satisfactory Not Satisfactory Not Satisfactory 3. He / She uses effectively the board, OHP, LCD etc. Goo
Very Good d Averag
e 4. His / Her audibility while giving the lecture is Goo
Very Good d Averag
e 5. His / Her conduct and enthusiasm in the class in terms of eye contact, voice modulation, mannerisms etc., is Goo
Very Good d Averag
e Not Satisfactory 6. His / Her interaction with the class is (asking and allowing questions to be asked, and clarifying doubts). Goo
Very Good d Averag
e e Not Satisfactory Not Satisfactory 7. His / Her coverage of syllabus Goo
Very Good d Averag
8. He / She Controls and maintains class discipline during his / her class. Always Controls Generall
y Controls Generall
y Indifferent 9. His / Her punctuality to the class. ‐ 118 ‐ Always Indifferent Always on time Ofte
n on time Rarely on time Never on time 10. The quality of assignments, if given Goo
Very Good Averag
d e Not Satisfactory 11. Fairness in awarding marks Always Fair Often Fair Rarely Fair Never Fair 12. He / She discusses and analyzes the question paper and answer sheets in the class Goo
Very Good Averag
d e Not Satisfactory 13. Does your teacher keep you engaged fully during the period Sometime
Always s Often Never 14. Your overall impression of the teacher Goo
Very Good Averag
d e Not Satisfactory 15. Any other observations / useful comments : (to improve the quality of teaching) LITTLE INFORMATION ABOUT YOU :‐ 16. Your attendance status :Less than 70 % ‐ 119 ‐ 70 % ‐ 80 % 80 % ‐ 100 % 17. Your academic performance : I Year ‐ EAMCET Rank : ________ II Year ‐ % of marks obtained in III Year ‐ % of marks obtained up to II Year : ________ IV Year ‐ % of marks obtained up to I Year : ________ III Year :________ No. of Backlogs, if any : ______________ SIGNATURE OF THE STUDENT ‐ 120 ‐ For each Post Graduate programme give the following: •
i.
Title of the programme ii.
Curricula and Syllabi iii.
Faculty Profile NA ¾ Brief profile of each faculty. Laboratory facilities exclusive to the PG programme Special Purpose
•
Software, all design tools in case •
Academic Calendar and frame work •
Research focus List of typical research projects. •
Industry Linkage •
Publications (if any) out of research in last three years out of masters projects •
Placement status •
Admission procedure •
Fee Structure •
Hostel Facilities •
Contact address of co‐ordinator of the PG programme Name: Address: Telephone: E‐mail: NOTE: Suppression and/or misrepresentation of information would attract appropriate penal action. ‐ 121 ‐ MD ENCLOSURE-I
BVC ENGINEERING COLLEGE STAFF LIST
Sl.
No.
Name of the Staff
Member
Designation
Qualification
Specialisation
1
2
3
4
5
Principal
B.E.,M.Tech.,
Ph.D., FIETE,FIE,
MIEEE.
ECE,
Instrumentation &
Controls, Antennas
Professor & Head
B.E.,M.Tech.
(Ph.D.)
High Voltage
Engineering
1
Dr.G.M.V.Prasad
Electrical & Electronics Engineering
1
Prof. J.V.G.Rama Rao
2
S.Srikanth
Associate Professor
M.Tech.
High Voltage
Engineering
3
M.Srinivasa Rao
Associate Professor
B.E.,M.Tech.
Advanced Power
Systems
4
J Satish Babu
Assistant Professor
B.Tech. (M.Tech.)
High Voltage
Engineering
5
A Hari Babu
Assistant Professor
B.Tech. (M.Tech.)
High Voltage
Engineering
6
K.Kishore Kumar
Assistant Professor
B.Tech. (M.Tech.)
Electrical Power
Engineering
7
D.N.V.V.R.L. Rajesh
Assistant Professor
B.Tech.
E.E.E.
8
TVVSS
Subrahmanyeswara Rao
Assistant Professor
B.Tech.
E.E.E.
9
A Rama Krishna
Assistant Professor
B.Tech.
E.E.E.
10
B Vijaya Kumar
Assistant Professor
B.Tech.
E.E.E.
11
B Ranga Naik
Assistant Professor
B.Tech.
E.E.E.
12
G V V S Narayana
Assistant Professor
B.Tech.
E.E.E.
13
V V D Prasad Reddy
Assistant Professor
B.Tech.
E.E.E.
14
T Sireesha
Assistant Professor
B.Tech.
E.E.E.
15
U L P Chandirka
Assistant Professor
B.Tech.
E.E.E.
16
Satya Venkata Prasad G
Assistant Professor
B.Tech.
E.E.E.
Mechanical Engineering
1
2
3
4
5
1
Prof.G.V.N.S.R. Ratnakara Rao
Professor
M.E., (Ph.D)
Thermal Power
Engineering
2
Dr. D.S.V. Prasad
Professor
B.Tech.,M.E.,
Ph.D.
Geo. Tech.
3
A. Ramakrishna
Associate Professor
& Head
B.Tech. ,M.E.
Thermal Engineering
4
D.Santha Rao
Associate Professor
M.E.
Manufacturing
Technology
5
B.V.Rajesh
Assistant Professor
B.Tech.
Mechanical
Engineering
6
Y V Ramana Murthy
Assistant Professor
B.E., M.Tech
CAD/CAM
7
G Narasa Raju
Assistant Professor
M.Tech.
CAD/CAM
8
B Srinivas
Assistant Professor
M.Tech.
Manufacturing
Technology
9
S. Venkateswara Rao
Assistant Professor
B.E., (M.Tech.)
Machine Design
10
G Venkateswara Rao
Assistant Professor
B.E. (M.Tech.)
Thermal Engineering
11
K Sri Rama Murthy
Assistant Professor
A.M.I.E.,
(M.Tech.)
Thermal Engineering
12
K Suresh
Assistant Professor
B.Tech.
Mechanical
Engineering
13
Sunita Devi K G Patnam
Assistant Professor
B.Tech.
Mechanical
Engineering
14
Phani Sowjanya Geddada
Assistant Professor
B.E.
Mechanical
Engineering
Electronics & Communication Engineering
1
2
3
4
5
Professor
B.Tech., M.E.,
Ph.D., M.D.T., SSC
Microwaves and
Radar Engineering,
GTD/UTD(Ph.D.)
Associate Professor &
Head
B.E., M.Tech.
ICS
1
Dr. N S Murthy Sarma
2
V. Dhana Raj
3
A.Pravin
Associate Professor
B.E.,M.Tech.
ICS
4
E Nageswara Rao
Associate Professor
M.E.
Control Systems
5
Ch Sreedevi
Associate Professor
B.E., M.Tech.
Associate Professor
M.Tech.
Assistant Professor
B.E.,(M.Tech.)
6
7
S Koteswara Rao
T Neelima
Microwave
Engineering
Digital Signal
Processing &
Instrumentation and
Control systems
Instrumentation and
Control systems
8
K. Rajasekhar
Assistant Professor
B.Tech.
(M.Tech.)
Instrumentation and
Control systems
9
Saladi Kanaka Durga
Assistant Professor
B.Tech.
ECE
10
G. Balasubrahmanyam
Assistant Professor
B.E.
ECE
11
N.Srinivasa Rao
Assistant Professor
B.E.
ECE
12
B V V Satyanararayana
Assistant Professor
B.Tech.
ECE
13
Y N Raghunath Babu
Assistant Professor
B.Tech.
ECE
14
P V V Durga Rao
Assistant Professor
B.Tech.
ECE
15
K Ravi Babu
Assistant Professor
B.Tech. (M.Tech.)
16
Ch Raja Sekhar
Assistant Professor
M.Tech.
17
K V Srinivas
Assistant Professor
M.E.
Communications &
Networking
18
Ch Anjaneyulu
Assistant Professor
M.Tech.
VLSI System Design
19
Durga Rayudu
Assistant Professor
B.E.
EIE
Digital Electronics &
Communication
Systems
Digital Electronics &
Communication
Systems
1
2
3
4
5
20
S V S N Murthy
Assistant Professor
B.Tech.
ECE
21
T S S Phani
Assistant Professor
B.Tech.
ECE
22
P Harika
Assistant Professor
B.Tech.
ECE
23
Ch V S Subrahmanyam
Assistant Professor
B.Tech.
ECE
24
B Usha Monika
Assistant Professor
B.Tech.
ECE
25
B Chiranjeevini Kumari
Assistant Professor
B.Tech.
ECE
Computer Science and Engineering
1
2
3
4
5
1
Dr. Gunamani Jena
Professor & Head
M.E.,Ph.D
Digital Image
Processing &
Artificial Neural
Network
2
Prof. P M Prasuna
Professor
M.Tech. (Ph.D)
CSE
3
P Suresh Babu
Associate Professor
M.E..
CSE
4
T.V.S. Krishna
Associate Professor
M.Tech.
CSE
5
V.S. Rama Krishna
Associate Professor
and T & P Officer
B.Tech. (M.Tech.)
CSE
6
N Krishnaiah
Associate Professor
B.Tech.., (M.Tech.)
Networks &
Programming
7
R V Satyanarayana
Assistant Professor
B.Tech.
CSE
8
N.Chandra Kala
Assistant Professor
B.Tech. (M.Tech.)
CSE
9
P.B.V. Raja Rao
Assistant Professor
B.E.
CSE
10
K Sumathi Devi
Assistant Professor
B.Tech.
CS & IT
11
B.P.N. Madhu Kumar
Assistant Professor
M.C.A.
(M.Tech.)
CSE
12
M V R Narasimha Rao
Assistant Professor
M.C.A. (M.Tech.)
CSE
13
Y M S D Sastry
Assistant Professor
B.Tech. (M.Tech.)
CSE
14
R Naga Prasad
Assistant Professor
B.Tech.
CSE
15
Y Ravi Raju
Assistant Professor
B.Tech.
CSE
16
Ch. Surya Kiran
Assistant Professor
B.Tech.
CSE
17
T Prabhakara Rao
Assistant Professor
. M.Tech.
CSE
18
D. Hari Babu
Assistant Professor
B.Tech.
CSE
19
K Murali Krishna
Assistant Professor
B.Tech.
CSE
20
K Niharika
Assistant Professor
B.Tech.
CSE
21
Ch Durga Prasad
Assistant Professor
B.Tech.
CSE
22
V Joseph Raju
Assistant Professor
B.Tech.
CSE
Information Technology
1
2
3
4
5
Professor
M.Tech.,
Ph.D.
Advanced
Computer
Architecture,
Computer Science
1
Dr. R John Mathew
2
K Srinivas
Associate Professor
& Head
M.Tech.
Computer Science
3
T. Srinivasa Rao
Associate Professor
M.Tech.
Computer Science
4
B Satyanarayana Murthy
Assistant Professor
M.Tech.
Computer Science
5
M. Prasad
Assistant Professor
M.Tech.
Computer Science
6
G Sasi Bhushana Rao
Assistant Professor
M.Tech.
CSE
7
K V B Hanuma
Assistant Professor
B.Tech.
IT
8
A. Naga Venkateswara Rao
Assistant Professor
B.Tech.
(M.Tech.)
Computer Science
9
B Sirisha
Assistant Professor
B.Tech.
IT
10
Saladi Kousalya Devi
Assistant Professor
B.Tech.
IT
11
K Sri Latha
Assistant Professor
B.Tech.
IT
12
P Amaravathi
Assistant Professor
B.Tech.
(M.Tech.)
Computer Science
Science & Humanities
1
2
3
4
5
1
T.V. Janardhana Rao
Professor & Head
B.E.,M.B.A.
(Ph.D.)
Electornics &
Marketing
2
B.Hema Sundar Raju
Associate Professor
M.Sc.,(Tech.),
M.Phil.
Mathematics
3
S. Abdul Sattar
Associate Professor
M.Sc.,M.Phil.
(Ph.D.)
Nuclear Physics
4
G.B.Chandra Mouli
Associate Professor
M.Sc., Phil.,
Applied Mathematics
5
S.Rama Krishna
Assistant Professor
M.B.A.,M.M.M.
M.Phil., M.A.
Finance & Marketing
6
N V Somyajulu Josyula
Assistant Professor
M.Sc., B.Ed.
Maths
7
S Tatayya Naidu
Assistant Professor
M.Sc., (M.Phil.)
Physics
8
N Phani Kumar
Assistant Professor
M.Sc.
Applied Mathematics
9
A Naveen Chandra
Assistant Professor
M.Sc., B.Ed.
Physics
10
M S S Bharathi
Assistant Professor
M.Sc.
Physics
11
M H S Padma
Assistant Professor
M.A.
English
12
K Ramesh Babu
Assistant Professor
M.A.
English
13
G S V Prasad
Assistant Professor
M.Sc., B.Ed.
Environmental
Science
14
Y Anuradha
Assistant Professor
M.Com.,
M.A.(Lit), (MBA),
ICWA
Commerce
15
A Durga Prasad
Assistant Professor
M.Sc.
Electronics
16
P.Srinivasa Rao
Physical Director
17
M. Akhil Kumar
Librarian
M.A., M.P.Ed.,
N.I.S., D.C.A.
M.Com.,
M.L.I.Sc.,
(M.Phil.)
Physical Education
Academic Libraries
MD ENCLOSURE - II
VII.
PROFILE OF DIRECTOR/PRINCIPAL WITH QUALIFICATIONS, TOTAL EXPERIENCE, AGE AND
DURATION OF EMPLOYMENT AT THE INSTITUTE CONCERNED
Department of Electrical and Electronics Engineering
1.. Name
: Moses Vara Prasad Gummadi
2. Date of Birth
: 16-10-1964
3. Educational Qualification
: B.E.(ECE)
M.Tech.(ECE)
Ph.D.(ECE)
4. Work Experience
Teaching
Research
Industry
Others
5. Area of Specializations
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
: 21 Years
:
-:
-:
: Electronics & Communication,
Instrumentation & Control Systems,
Phased Array Antennas
: Analog/Digital Communications,
Signal Processing, Antenna & Wave Propagation
:
--
:
--
No. of papers published in
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
-1
17
8. Projects Carried out
: 12 B.Tech. Level Projects
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
18
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
2
1.. Name
: J V G Rama Rao
2. Date of Birth
: 26-08-1972
3. Educational Qualification
: M.Tech.(Ph.D.)
4. Work Experience
Teaching
Research
Industry
Others
: 8 Years
: -: 3 Years
:
5. Area of Specializations
: High Voltage Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Net Work Theory, Electrical Engineering,
Power Systems-I, Power Systems-II, Power Systems-III,
Power Systems Operation & Control, Power Electronics,
HVDC Transmission Systems, Switch Gear Protection,
High Voltage Engineering, Instrumentation
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
--_
7. Research guidance
No. of papers published in
8. Projects Carried out
: 35 B.Tech. Projects
2 M.Tech. Project
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
: One Publication – ISH – 2001,Bangalore.
12. No. of Books published
with details
:
--
13. Summer/Winter School attended: One workshop attended during 2006-2007
1.. Name
: S. Srikanth
2. Date of Birth
: 31-08-1976
3. Educational Qualification
: M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 9 Years
:
-: 1 Year
:
--
5. Area of Specializations
: High Voltage Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: Switching Theory & Logic Design,
Power System Operation and Control
Electromechanics – I, Control Systems,
Power Systems – I, Power Semiconductor
Drives, Modeling of Power System Components
Electrical Engineering,
Linear and Discrete Systems Analysis
:
-:
--
Masters’s - National Journals
:
Ph.D. - International Journals :
- Conferences
:
----
8. Projects Carried out
:
15
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
-
13. Summer/Winter School attended:
1
1.. Name
: M. Srinivasa Rao
2. Date of Birth
: 06-03-1977
3. Educational Qualification
: M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 5 Years
:
-:
-:
--
5. Area of Specializations
: Advanced Power Systems
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Electrical Measurements, Network Analysis,
Basic Electrical Engineering, Electro Mechanics – I,
Computer Methods in Power System Components,
Basic Electrical Engineering
:
--
:
--
Masters’s - National Journals
:
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
10
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: J Satish Babu
2. Date of Birth
: 23-08-1980
3. Educational Qualification
: B.Tech., (M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 3 Years
:
-: 2 Years
:
--
5. Area of Specializations
: High Voltage Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Elements of Electrical Engineering,
Electrical Technology, Power Systems – I,
Power Systems – II, Power Systems – III,
Electrical Measurements, Power Semiconductor
Drives, Basic Electrical Engineering,
Electrical Installation & Maintenance,
DC Machines Both theory & Laboratory
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
3
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: A Hari Babu
2. Date of Birth
: 03-01-1980
3. Educational Qualification
: B.Tech.(M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 3 Years 6 Months
:
-: 1 Year
:
--
5. Area of Specializations
: Power Systems, High Voltage Engineering
6. Subjects teaching at
Under Graduate Level: Network Analysis, Machines – I, Machines – II,
Machines – III, Power Systems – I,
Power Systems – II, High Voltage Engineering,
Network Analysis, Electrical Circuits Analysis,
Utilization of Electrical Energy,
Electro Mechanics - I
Post Graduate Level
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
3
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: K. Kishore Kumar
2. Date of Birth
: 01-08-1979
3. Educational Qualification
: B.Tech., (M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 5 Years
:
-:
-:
--
5. Area of Specializations
: Electrical Power Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Electro Mechanics – I, Electro Mechanics – II,
Power Electronics, Power Semiconductor Drives,
Electrical Technology, Electrical Circuits,
Electrical Measurements, Pulse and Digital Circuits
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
6
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: D.N.V.V.R.L. Rajesh
2. Date of Birth
: 21-09-1977
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 4 Years
:
-:
-:
--
5. Area of Specializations
:
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Electrical Technology, Electrical Circuits,
Electro Mechanics – III, Electro Mechanics – II,
Pulse and Digital Circuits
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
14 B.Tech. Projects
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Subrahmanyeswara Rao T V V S S
2. Date of Birth
: 04-11-1977
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 5 Years
:
-:
-:
--
5. Area of Specializations
: EEE
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Network Analysis, Electrical Circuits,
Electrical Technology, Machines – I, Machines – II,
Power Systems – I, Power Systems – II,
Electrical Circuits Lab
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
3
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: A Rama Krishna
2. Date of Birth
: 02-04-1984
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 1 Year
:
-:
-:
--
5. Area of Specializations
: EEE
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Power Electronics, Instrumentation,
Natural Convention Energy Sources.
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
1
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Vijay Kumar Bollavarapu
2. Date of Birth
: 08-01-1985
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 1 Year 2 Months
:
-:
-:
--
5. Area of Specializations
: EEE
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Switching Theory and Logic Design,
Digital Logic Design,
Control Systems
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
1
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: B Ranga Naik
2. Date of Birth
: 20-06-1983
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 1 Year 3 Months
:
-:
-:
--
5. Area of Specializations
:
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
--
: Power System Operation and Control,
Electrical Technology
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
2
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: V V S Narayana Guttula
2. Date of Birth
: 17-03-1986
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 6 Months
:
-:
-:
--
5. Area of Specializations
:
6. Subjects teaching at
Under Graduate Level
: Electro Magnetic Fields
Post Graduate Level
--
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: V V Durga Prasad Reddy
2. Date of Birth
: 08-04-1987
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
:
:
:
:
5. Area of Specializations
: Electrical & Electronics Engineering
6. Subjects teaching at
Under Graduate Level
: Electrical Machines - I
Post Graduate Level
-----
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: T Sireesha
2. Date of Birth
: 04-02-1987
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
:
:
:
:
5. Area of Specializations
: Electrical & Electronics Engineering
6. Subjects teaching at
Under Graduate Level
: Power Systems - II
Post Graduate Level
-----
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: U L P Chandrika
2. Date of Birth
: 10-06-1986
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
:
:
:
:
-----
5. Area of Specializations
:
--
6. Subjects teaching at
Under Graduate Level
: Electrical and Electronics Engineering
Post Graduate Level
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Satya Venkata Prasad G
2. Date of Birth
: 02-06-1987
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
:
:
:
:
5. Area of Specializations
: Electrical & Electronics Engineering
6. Subjects teaching at
Under Graduate Level
:
--
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
Post Graduate Level
7. Research guidance
No. of papers published in
-----
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
Department of Mechanical Engineering Engineering
1.. Name
: G.V.N.S.R. Ratnakara Rao
2. Date of Birth
: 29-08-1975
3. Educational Qualification
: M.E., (Ph.D)
4. Work Experience
Teaching
Research
Industry
Others
: 10 Years
:
-:
-:
--
5. Area of Specializations
: Thermal Sciences (Mechanical Engg.)
6. Subjects teaching at
Under Graduate Level
: Thermal Engineering
Post Graduate Level
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
-2
3
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
2
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
-
1.. Name
: D.S.V. Prasad
2. Date of Birth
: 02-07-1969
3. Educational Qualification
: B.Tech., M.E.., (Ph.D)
4. Work Experience
Teaching
Research
Industry
Others
: 13 Years 6 Months
:
-:
-:
--
5. Area of Specializations
: Civil
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: Engineering Mechanics, Mechanic of Solids,
Hydraulic Machines & Systems,
Environmental Studies, Engineering Graphics,
Fluid Mechanics & Hydraulic Machinery,
Classical Mechanics & Engineering Drawing Practice
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
8. Projects Carried out
9. Patents
10. Technology Transfer
11. Research Publications
12. No. of Books published
with details
:
:
:
:
:
13. Summer/Winter School attended:
1
1
10
------
--
1.. Name
: A. Rama Krishna
2. Date of Birth
: 05-06-1973
3. Educational Qualification
: M.E.
4. Work Experience
Teaching
Research
Industry
Others
: 9 Years
:
-:
-:
--
5. Area of Specializations
: Thermal Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Thermo Dynamics,
Refrigeration & Air Condition
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
STTP on “CFD” organized by IIT, Madras
dated 2-7 June, 2008
1.. Name
: D. Santha Rao
2. Date of Birth
: 05-06-1973
3. Educational Qualification
: M.E.
4. Work Experience
Teaching
Research
Industry
Others
: 9 Years 6 Months
:
-:
-:
--
5. Area of Specializations
: Manufacturing Technology
6. Subjects teaching at
Under Graduate Level
: Production Technology, Operations Research
Post Graduate Level
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended: Workshop on NDT & IT applications in
manufacturing
1.. Name
: B.V. Rajesh
2. Date of Birth
: 25-06-1978
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 7 Years
:
-:
-:
--
5. Area of Specializations
: Mechanical Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Machine Drawing,
Production Drawing Practice
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Y V Ramana Murty
2. Date of Birth
: 15-08-1970
3. Educational Qualification
: M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 5Years
:
-: 7Years
:
--
5. Area of Specializations
: CAD/CAM
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Mechatronics, Robotics,
Metrology & Surface Engineering
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: G Narasa Raju
2. Date of Birth
: 15-06-1970
3. Educational Qualification
: M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 6 Years
:
-:
-:
--
5. Area of Specializations
: CAD/CAM
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Mechanics of Solids, Kinematics of Machines,
Dynamics of Machines, CAD/CAM,
Finite Element Methods, Engineering Graphics
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: B Srinivas
2. Date of Birth
: 07-08-1977
3. Educational Qualification
: M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 7 Years
:
-:
-:
--
5. Area of Specializations
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: Manufacturing Technology
: Metallurgy & Material Science,
Instrumentation & Control Systems,
Mechanical Handling Equipment
:
-:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
--2
8. Projects Carried out
: 1. Solidification studies & Micro Structure
Assessment of LM-6 alloy
2. Design & Fabrication of (1-2) surface condenser.
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended: 1. Renewable Energies & Alternative fuels
– STTP at IITK
2. Responsive Manufacturing – STTP at NITW
3. Recent Advance in Numerical techniques
– STTP at NITC.
1.. Name
: S. Venkateswara Rao
2. Date of Birth
: 02-09-1965
3. Educational Qualification
: B.E., (M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 11 Years 6 Months
:
-: 3 Years
:
--
5. Area of Specializations
: Machine Design
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Production Technology,
Design of Machine Members – I
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: G Venkateswara Rao
2. Date of Birth
: 15-02-1974
3. Educational Qualification
: B.E., M.Tech.(Pursuing)
4. Work Experience
Teaching
Research
Industry
Others
: 4 Years
:
-:
-: 5 Years
5. Area of Specializations
: Thermal Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Thermal Engineering – I, Power Plant Engineering,
Thermodynamics, Engineering Drawing Practice
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: K Sri Rama Murthy
2. Date of Birth
: 20-07-1971
3. Educational Qualification
: A.M.I.E. (Mechanical)
M.Tech. (Pursuing)
4. Work Experience
Teaching
Research
Industry
Others
: 5 Years
:
-: 6 Years
:
--
5. Area of Specializations
: Thermal Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Engineering Drawing Practice,
Fluid Mechanics & Hydraulic Machines.
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Kale Suresh
2. Date of Birth
: 01-01-1983
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 1 Year
:
-: 3 Years
:
--
5. Area of Specializations
: Mechanical Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Engineering Drawing Practice,
Engineering Graphics
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: K. Sunitha Devi
2. Date of Birth
: 02-10-1982
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 1 Year
:
-:
-:
--
5. Area of Specializations
:
6. Subjects teaching at
Under Graduate Level
: Engineering Chemistry & Engineering Drawing
Post Graduate Level
--
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
1.. Name
: Phani Sowjanya Geddada
2. Date of Birth
: 25-06-1984
3. Educational Qualification
: B.E.
4. Work Experience
Teaching
Research
Industry
Others
: 1 Year
:
-:
-:
--
5. Area of Specializations
:
--
6. Subjects teaching at
Under Graduate Level
:
--
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
Post Graduate Level
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
Department of Electronics Communications Engineering
1.. Name
: Dr. N S N M Sarma
2. Date of Birth
: 10-06-1962
3. Educational Qualification
: B.Tech., M.E., Ph.D., M.D.T, SSC
4. Work Experience
Teaching
Research
Industry
Others
: 12 Years
: 5 Years 9 Months
:
-: 6 Months
5. Area of Specializations
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: Electronics & Communication (B.Tech.)
Microwaves & Radar Engineering (M.E.)
GTD/UTD (Ph.D.)
: Antenna and Wave Propagation,
Electromagnetic Theory, Microwave Engineering,
Networks & Transmission Lines
: Satellite Communication,
Microwave Antennas, Radio Nav.
: 3 Ph.D. Proposals accepted by JNTU
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:3
---
8. Projects Carried out
: 20
9. Patents
:
10. Technology Transfer
: Supported RCI, DLRL, DST
by executing sponsored projects
11. Research Publications
: 98
12. No. of Books published
with details
: 14 Technical reports under sponsored projects,
included in ref. publications
--
13. Summer/Winter School attended: Summer 1(1wk) Winter 2 (2wk+1wk)
1.. Name
: V. Dhana Raj
2. Date of Birth
: 14-04-1973
3. Educational Qualification
: B.E., M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 8 Years 6 Months
:
-: 3 Years
:
--
5. Area of Specializations
: Instrumentation & Control Systems
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Satellite Communications,
Microprocessors & Interfacing,
Television Engineering,
Probability Theory & Stochastic Processes,
Microprocessors & Microcontrollers
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
9. Patents
:
16 Projects
2 Mini Projects
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: A. Pravin
2. Date of Birth
: 05-06-1977
3. Educational Qualification
: B.E., M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 7 Years
:
-:
-:
--
5. Area of Specializations
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: B.E.-Electronics and Communications Engineering
(M.Tech.-Instrumentation & Control Systems )
: Electronic Devices & Circuits, Linear & Digital IC
Applications, Digital IC Applications, Probability &
Random Variability, Digital Communications,
Analog Communications, Electronic Circuit
Analysis, Communication Systems,
Basic Electronics, Digital Signal Processing,
Linear IC Applications, Signals & Systems,
Electronic Circuit Analysis
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
: I have guided two under graduate level projects per
year from 2001 to 2008 April
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: E. Nageswara Rao
2. Date of Birth
: 01-08-1970
3. Educational Qualification
: M.E. (Control Systems)
4. Work Experience
Teaching
Research
Industry
Others
: 9 Years
:
-: 1 Year
:
--
5. Area of Specializations
: Control Systems
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Signals & Systems, Linear Digital IC Applications,
Communication Systems, Communication Theory,
TV Engineering, Satellite Communications,
Radar Engineering, Cellular and Mobile
Communications, Microprocessors, OOPs JAVA,
Microwave Engineering, EMI.
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
Yes
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended: “WOLTEC” 2 day work shop at MVGR Engineering
College, Vizianagaram on latest technolodge on
Engineering Communication.
1.. Name
: Ch Sridevi
2. Date of Birth
: 09-07-1976
3. Educational Qualification
: B.E., M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 4 Years 3 Months
:
-:
-:
--
5. Area of Specializations
: Microwave Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Pulse and Digital Circuits, Switching Theory & Logic
Design, Antenna & Wave Propagation, Electro
Magnetic Wave & Transmission Lines, Probability &
Random Variability, Signals & Systems
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
: 4 (UG)
2 (Mini Project)
1 (PG Level)
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: S Koteswara Rao
2. Date of Birth
: 05-07-1979
3. Educational Qualification
: M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 6 Years
:
-:
-:
--
5. Area of Specializations
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Digital Signal Processing,
Instrumentation & Control Systems
: Electronic Devices & Circuits,
Optical Fiber Communications,
Digital Logic Design, Microwave Engineering,
Digital Signal Processing, Basic Electronics,
Microprocessors & Interfacing, Electrical Circuits
Analysis, Microprocessors & Interfacing
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
--1
7. Research guidance
No. of papers published in
8. Projects Carried out
:
4
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
2
1.. Name
: T Neelima
2. Date of Birth
: 30-06-1981
3. Educational Qualification
: B.E. (M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 5 Years
:
-:
-:
--
5. Area of Specializations
: Instrumentation & Control Systems-(M.Tech.)
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Electronic Devices & Circuits, Basic Electronics,
Pulse and Digital Circuits, Switching Theory and
Logic Design, Digital Logic Design,
Digital Communications
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
: 1. Software Implementation of digital filter for
depth migration.
2. Intelligent traffic control systems.
3. Remote automation of devices using serial
to Ethernet Adaptor.
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
Two Days workshop on “Embedded Systems &
Robotics” in GIET, Rajahmundry
1.. Name
: K. Raja Sekhar
2. Date of Birth
: 25-02-1975
3. Educational Qualification
: B.Tech. (M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 8 Years
:
-:
-:
--
5. Area of Specializations
: Instrumentation and Control Systems
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Computer Organization, Signals & Systems,
Digital Communications, Cellular and Mobile
Communications, Control Systems, Communication
Systems, Microprocessors and Microcontrollers,
Communication Theory, Telecommunications
Switching Systems & Networks
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
9. Patents
:
4 Projects
2 Mini Projects
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended: M.Tech(SSS)
1.. Name
: Saladi Kanaka Durga
2. Date of Birth
: 12-02-1980
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 6 Years
:
-:
-:
--
5. Area of Specializations
: Electronics & Communication Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Embedded Systems, Digital Logic Design,
Computer Organisation
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
4
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
1.. Name
: G. Bala Subrahmanyam
2. Date of Birth
: 14-08-1977
3. Educational Qualification
: B.E.(ECE)
4. Work Experience
Teaching
Research
Industry
Others
: 6 Years 6 Months
:
-:
-:
--
5. Area of Specializations
:
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
-
: Electronic Devices & Circuits, Semiconductor
Devices & Circuits , Pulse and Digital Circuits,
Electronic Circuit Analysis, Communication Theory,
Electro Magnetic and Transmission Lines, Digital
Communications, Digital IC Applications, Linear
and Digital IC Applications, Electronic Measurement
& Instrumentation, Industrial Electronics,
Optical Communications
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
1.. Name
: N. Srinivasa Rao
2. Date of Birth
: 12-06-1979
3. Educational Qualification
: B.E.
4. Work Experience
Teaching
Research
Industry
Others
: 5 ½ Years
:
-:
-:
--
5. Area of Specializations
: Electronics & Communication Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Electronic Devices & Circuits,
Digital Signal Processing Lab
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: B V V Satyanarayana
2. Date of Birth
: 20-06-1983
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 4 Years
:
-:
-:
--
5. Area of Specializations
: Electronics & Communication Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Electrical Circuits Analysis,
Electronic Devices & Circuits,
Digital Communications,
VLSI Systems Design, VLSI
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
: 4 Projects (B.Tech. Level)
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Y N Raghunath Babu
2. Date of Birth
: 04-08-1982
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 4 Years
:
-:
-:
--
5. Area of Specializations
: Electronics & Communication
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Principles of Communications,
Digital IC Applications
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
4 Final Year Projects
1 Mini Project
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: P V V Durga Rao
2. Date of Birth
: 28-05-1980
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 4 Years
:
-:
-:
--
5. Area of Specializations
: Electronics & Communication
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Linear Integrated Circuit Applications,
Electronic Circuit Analysis, Microwave Engineering,
Electronic Devices & Circuits, Networks.
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
2
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: K Ravi Babu
2. Date of Birth
: 01-06-1981
3. Educational Qualification
: B.Tech. (M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 1 Year
:
-:
-:
--
5. Area of Specializations
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: Linear IC Applications, Digital Electronics &
Communication Systems, Analog Communications,
Digital Signal Processing
: Linear IC Applications,
Linear & Digital IC Applications
:
:
---
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
8. Projects Carried out
: 1 Project
9. Patents
:
10. Technology Transfer
:
11. Research Publications
:
12. No. of Books published
:
with details
13. Summer/Winter School attended:
------
1.. Name
: Ch Raja Sekhar
2. Date of Birth
: 05-01-1982
3. Educational Qualification
: M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 1 Year
:
-:
-:
--
5. Area of Specializations
: Digital Electronics & Communication Systems
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: Microprocessors,
Embedded Systems
:
:
---
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
8. Projects Carried out
: 1 Final Year Project
2 Mini Project
9. Patents
:
10. Technology Transfer
:
11. Research Publications
:
12. No. of Books published
:
with details
13. Summer/Winter School attended:
------
1.. Name
: K V Srinivas
2. Date of Birth
: 17-05-1984
3. Educational Qualification
: M.E.
4. Work Experience
Teaching
Research
Industry
Others
:
:
:
:
5. Area of Specializations
: Communications & Networking
6. Subjects teaching at
Under Graduate Level
:
--
:
:
---
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
Post Graduate Level
7. Research guidance
No. of papers published in
8. Projects Carried out
:
9. Patents
:
10. Technology Transfer
:
11. Research Publications
:
12. No. of Books published
:
with details
13. Summer/Winter School attended:
-----
--------
1.. Name
: Ch Anjaneyulu
2. Date of Birth
: 30-08-1979
3. Educational Qualification
: M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 3 Years
:
-:
-:
--
5. Area of Specializations
: VLSI System Design
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: Electronics Devices & Circuits, Digital Electronics,
Pulse and Digital Circuits, Microprocessors,
Computer Networks
:
:
---
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
8. Projects Carried out
: 1) DS - CDMA
2) C – Band Receiver
3) PCB Designing
9. Patents
:
-10. Technology Transfer
:
-11. Research Publications
:
-12. No. of Books published
:
-with details
13. Summer/Winter School attended: 1) Industrial Experience in (E-Zone)
2) Industrial Experience in EUREKA FORBES,
security systems division, worked as Territory
Incharge.
3) Established won electronic industry (small scale),
manufacturing water level indicators &
controllers(for domestic & industrial purpose.)
1.. Name
: Durga Rayudu
2. Date of Birth
: 29-06-1980
3. Educational Qualification
: B.E.
4. Work Experience
Teaching
Research
Industry
Others
: 4Years
:
-:
-:
--
5. Area of Specializations
: Electronics & Communication
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Linear IC Applications, Digital Image Processing,
Electronic Measurement & Instrumentation,
Electronic Devices & Circuits, Digital Logic Design
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
2
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: S V S N Murthy
2. Date of Birth
: 18-10-1984
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 3 Months
-:
: 8 Months
-:
5. Area of Specializations
: Electronics & Communication Engineering
6. Subjects teaching at
Under Graduate Level
: Digital Image processing
Post Graduate Level
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
--
7. Research guidance
No. of papers published in
--
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: T S S Phani
2. Date of Birth
: 29-07-1979
3. Educational Qualification
: B.E.
4. Work Experience
Teaching
Research
Industry
Others
: 6 Months
:
-: 1 Year
:
--
5. Area of Specializations
: Electronics & Communication Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: Digital Logic Design
:
-:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
8. Projects Carried out
:
9. Patents
:
10. Technology Transfer
:
11. Research Publications
:
12. No. of Books published
:
with details
13. Summer/Winter School attended:
----------
1.. Name
: Harika Pangam
2. Date of Birth
: 08-08-1987
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 2 Months
:
-: 1 Year
:
--
5. Area of Specializations
: Electronics & Communication Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: Digital Logic Design
:
-:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
8. Projects Carried out
:
9. Patents
:
10. Technology Transfer
:
11. Research Publications
:
12. No. of Books published
:
with details
13. Summer/Winter School attended:
----------
1.. Name
: Ch V S Subrahmanyam
2. Date of Birth
: 15-07-1987
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 2 Months
:
-:
-:
--
5. Area of Specializations
: Electronics & Communication Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: Computer Networks
:
-:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
8. Projects Carried out
:
9. Patents
:
10. Technology Transfer
:
11. Research Publications
:
12. No. of Books published
:
with details
13. Summer/Winter School attended:
----------
1.. Name
: Usha Monika Budim
2. Date of Birth
: 20-07-1987
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 2 Months
:
-:
-:
--
5. Area of Specializations
: Electronics & Communication Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: Pulse and Digital Circuits
:
-:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
8. Projects Carried out
:
9. Patents
:
10. Technology Transfer
:
11. Research Publications
:
12. No. of Books published
:
with details
13. Summer/Winter School attended:
----------
1.. Name
: B Chiranjeevini Kumari
2. Date of Birth
: 02-04-1986
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 2 Months
:
-:
-:
--
5. Area of Specializations
: Electronics & Communication Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: Digital Communicaitons
:
-:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
8. Projects Carried out
:
9. Patents
:
10. Technology Transfer
:
11. Research Publications
:
12. No. of Books published
:
with details
13. Summer/Winter School attended:
----------
Department of Computer Science and Engineering
1.. Name
: Gunamani Jena
2. Date of Birth
: 03-01-1962
3. Educational Qualification
: M.E.(CSE)
Ph.D.
4. Work Experience
Teaching
Research
Industry
Others
: 10 Years
: -: 11 Years
: --
5. Area of Specializations
: Computer Science & Engineering
6. Subjects teaching at
Under Graduate Level
: Object Oriented Analysis & Design using UML,
Digital Signal Processing, Digital Image Processing,
Artificial Intelligence, Neural Networks,
Computer Networks, Database Management Systems,
Advanced Computer Architecture, Distributed Systems
Post Graduate Level
: Digital Signal Processing & Digital Image Processing
7. Research guidance
No. of papers published in
:
Masters’s - National Journals
:
Ph.D. - International Journals :
Conferences :
--
-1
International & National 9 papers published
8. Projects Carried out
: ME – 1
B.Tech. Level – 8
9. Patents
10. Technology Transfer
11. Research Publications
:
:
:
12. No. of Books published
with details
: An introductory course on Artificial Neural Network
(Under publishing)
13. Summer/Winter School attended:
--9
--
1.. Name
: P M Prasuna
2. Date of Birth
: 26-07-1971
3. Educational Qualification
: M.Tech.(Ph.D.)
4. Work Experience
Teaching
Research
Industry
Others
: 2 Months
:
-:
-:
--
5. Area of Specializations
: Computer Science & Engineering
6. Subjects teaching at
Under Graduate Level
:
Post Graduate Level
: Digital Image Processing
7. Research guidance
No. of papers published in
:
Masters’s - National Journals
Ph.D. - International Journals
International Conferences
National Conferences
:
:
:
:
8. Projects Carried out
:
9. Patents
:
10. Technology Transfer
:
11. Research Publications
:
12. No. of Books published
with details
:
13. Summer/Winter School attended:
1.. Name
: P Suresh Babu
2. Date of Birth
: 24-06-1968
3. Educational Qualification
: M.E.
4. Work Experience
Teaching
Research
Industry
Others
: 9 Years
:
-: 4 Years
:
--
5. Area of Specializations
: Computer Science & Technology
6. Subjects teaching at
Under Graduate Level
: Neural Networks & Fuzzy Logic,
Advanced Compu8tring Concepts,
Automata & Compiler design, C & Data Structures
Post Graduate Level
:
--
7. Research guidance
No. of papers published in
:
--
:
:
:
:
-----
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
Masters’s - National Journals
Ph.D. - International Journals
International Conferences
National Conferences
13. Summer/Winter School attended:
--
1.. Name
: T.V. Sai Krishna
2. Date of Birth
: 07-08-1982
3. Educational Qualification
: M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 4 Years 6 Months
:
-:
-:
--
5. Area of Specializations
: Computer Science & Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Advanced computer Architecture, Multimedia and
Web Design, Advanced UNIX Programming,
Data Mining & Warehousing,
Computer Graphics, Neural Networks,
Software Testing Methodologies,
Software Engineering
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
National Conferences:
---
7. Research guidance
No. of papers published in
--
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended: M.Tech.(SSS) at JNTU, Anantapur.
1.. Name
: V.S. Rama Krishna
2. Date of Birth
: 23-12-1980
3. Educational Qualification
: B.Tech. (M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 5 Years
:
-:
-:
--
5. Area of Specializations
: Computer Science and Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: C and Data Structures, Advanced Data Structures,
Operating Systems, Computer Networks,
Data Analysis & Algorithms,
Database Management Systems
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
--1
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended: Summer School at JNTU, Kakinada.
Winter School program attended at SONA College
of Technology, Salem, Tamilnadu
1.. Name
: N Krishnaiah
2. Date of Birth
: 01-05-1980
3. Educational Qualification
: B.Tech. (M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 4 Years
:
-:
-:
--
5. Area of Specializations
: Networks & Programming
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Principles of Programming Languages, Computer
Graphics, Database Management Systems,
Distributed Systems, Embedded Systems,
Multimedia and Web Design, Mathematical Methods
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
: Four projects in Under Graduate level
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended: M.Tech.(SSS)
1.. Name
: R.V. Satyanarayana
2. Date of Birth
: 25-02-1979
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 5 Years
:
-:
-:
--
5. Area of Specializations
: Computer Science Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Database Management Systems, JAVA,
Mathematical Foundations of Computer Science,
Advanced Data Structures, Compiler Design,
Formal Languages and Automata Theory, JAVA,
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Chandra Kala Nelli
2. Date of Birth
: 04-02-1980
3. Educational Qualification
: B.Tech. (M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 3 Years
:
-:
-:
--
5. Area of Specializations
:
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
--
: JAVA, Computer Organisation,
Language Processors, Real Time Systems,
Formal Languages and Automata Theory
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended: JNTU, Anantapur
1.. Name
: P.B.V. Raja Rao
2. Date of Birth
: 05-07-1981
3. Educational Qualification
: B.E. (CSE)
4. Work Experience
Teaching
Research
Industry
Others
: 3 Years
:
-:
-:
--
5. Area of Specializations
: Computer Science and Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Data Communications, C & Data Structures,
IT Workshop, Principles of Programming Languages
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
4
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: K Sumathi Devi
2. Date of Birth
: 07-06-1984
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 2 Years
:
-:
-:
--
5. Area of Specializations
: Computer Science & Information Technology
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Computer Programming & Numerical Methods,
MFCS, JAVA
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: B.P.N. Madhu Kumar
2. Date of Birth
: 16-05-1978
3. Educational Qualification
: M.C.A.. (M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 4 Years
:
-:
-:
--
5. Area of Specializations
: Computer Science
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: C & Data Structures, C++, Database Management
Systems, JAVA, IT Workshop, Software Engineering,
Multimedia and Web Design, Web Technologies
: JAVA, Database Management Systems,
Data Structures, C
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: M V R Narasimha Rao
2. Date of Birth
: 20-06-1976
3. Educational Qualification
: M.C.A., (M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 4 Years
:
-:
-:
--
5. Area of Specializations
: Computer Science
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: C & Data Structures, JAVA,
Software Engineering,
Multi Media & Web Design,
Operating Systems
: JAVA, File Handling through C++,
C Programming , Data Structures, OOSE
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Y M S D Sastry
2. Date of Birth
: 18-03-1980
3. Educational Qualification
: B.Tech.(M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 1 Year
:
-:
-:
--
5. Area of Specializations
: Computer Science
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Principles of Programming Languages, UNIX,
Operating Systems
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: R N Prasad
2. Date of Birth
: 09-06-1983
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 1 Year
:
-:
-:
--
5. Area of Specializations
: Computer Science and Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: C& Datastructures, Network Protocols,
Multimedia & Web Design
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Y Ravi Raju
2. Date of Birth
: 09-07-1987
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 3 Months
:
-:
-:
--
5. Area of Specializations
: Computer Science and Engineering
6. Subjects teaching at
Under Graduate Level
: OOPs through JAVA
Post Graduate Level
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Ch. Surya Kiran
2. Date of Birth
: 15-03-1982
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 3 Years
:
-:
-:
--
5. Area of Specializations
: Information Technology
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: JAVA, C++, Operating Systems,
Computer Organization,
Operating Systems & System Programming
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: T Prabhakara Rao
2. Date of Birth
: 10-08-1983
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 3 Years
:
-:
-:
--
5. Area of Specializations
: Computer Science & Engineering
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: JAVA, C++, Operating Systems,
Computer Organization,
Operating Systems & System Programming
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: D. Hari Babu
2. Date of Birth
: 03-02-1980
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 5 Years
:
-:
-:
--
5. Area of Specializations
:
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
--
: Computer Networks
Network Security & Cryptography
OOPs through Java
Data Communications
Real Time Systems
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
1.. Name
: K Murali Krishna
2. Date of Birth
: 01-05-1986
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
:
:
:
:
5. Area of Specializations
: Computer Science & Engineering
6. Subjects teaching at
Under Graduate Level
:
--
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
Post Graduate Level
7. Research guidance
No. of papers published in
-----
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: K Niharika
2. Date of Birth
: 10-09-1986
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
:
:
:
:
5. Area of Specializations
: Computer Science & Engineering
6. Subjects teaching at
Under Graduate Level
:
--
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
Post Graduate Level
7. Research guidance
No. of papers published in
-----
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Ch Durga Prasad
2. Date of Birth
: 10-05-1984
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
:
:
:
:
5. Area of Specializations
: Computer Science & Engineering
6. Subjects teaching at
Under Graduate Level
:
--
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
Post Graduate Level
7. Research guidance
No. of papers published in
-----
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: V Joseph Raju
2. Date of Birth
: 12-08-1985
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
:
:
:
:
5. Area of Specializations
: Computer Science & Engineering
6. Subjects teaching at
Under Graduate Level
:
--
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
Post Graduate Level
7. Research guidance
No. of papers published in
-----
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
Department of Information Technology
1.. Name
: Rapaka John Mathew
2. Date of Birth
: 08-08-1967
3. Educational Qualification
: M.Tech., Ph.D.
4. Work Experience
Teaching
Research
Industry
Others
: 13 Years
: 8 Years
:
-:
--
5. Area of Specializations
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Advanced Computer Architecture,
Computer Science
: Computer Networks, Mathematical Foundations &
Computer Sciences, NSC
:
--
7. Research guidance
No. of papers published in
:
2
Masters’s - National Journals
:
1
- International Journals :
1
Ph.D.
- Conferences
8. Projects Carried out
9. Patents
:
:
:
1
---
10. Technology Transfer
:
--
11. Research Publications
:
2
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: K. Srinivas
2. Date of Birth
: 16-03-1979
3. Educational Qualification
: M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 5 Years
:
-:
-:
--
5. Area of Specializations
: Computer Science
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: Object Oriented Analysis & Design through UML,
Distributed Systems, Software Testing
Methodologies, Software Project Management,
Computer Organisation
:
-:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: T. Srinivasa Rao
2. Date of Birth
: 01-06-1981
3. Educational Qualification
: M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 5 Years 6 Months
:
-:
-:
--
5. Area of Specializations
: Computer Science
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
7. Research guidance
No. of papers published in
: Computer Networks, OOPs through JAVA,
Neural Networks, C & Data Structures,
Distributed Systems, Network Protocols,
Network Security & Cryptography,
Multimedia & Web Design, Internet Technologies,
Data Mining & Data Warehousing
:
--
: 1) Information System Security
2) Organizational forms of dataware housing
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
---
8. Projects Carried out
: Internet Mailing System(B.Tech.)
Quantum Cryptography(M.Tech.)
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended: M.Tech(SSS) at JNTU, Kakinada.
1.. Name
: B. Satyanarayana Murthy
2. Date of Birth
: 18-03-1984
3. Educational Qualification
: M.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 3 Years
:
-:
-:
--
5. Area of Specializations
: Computer Science
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Discrete Structures Graph Theory,
Operating System & System Programming,
Principle of Programming Languages,
Computer Graphics, Operating Systems
Advanced Computer Architecture, IRS, ACD.
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
Online Examination, Web crawler.
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended: M.Tech.(SSS)
1.. Name
: M. Prasad
2. Date of Birth
: 22-03-1984
3. Educational Qualification
: B.Tech. (M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 3 Years
:
-:
-:
--
5. Area of Specializations
: Computer Science
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
:Data Communications, Computer Networks,
Distributed Systems, Embedded Systems,
C& Data Structures, Computer Organization, Web
Technologies, Human Computer Interaction
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
: 3
1. Online Exam (Diploma)
2. Web Reporting System (B.Tech.)
3. Information Retrieval System (M.Tech.)
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended: M.Tech.(SSS) at JNTU Ananthapur.
1.. Name
: G Sasi Bhushana Rao
2. Date of Birth
: 02-11-1981
3. Educational Qualification
: M.Tech. (CS)
4. Work Experience
Teaching
Research
Industry
Others
: 2 Years
:
-:
-:
--
5. Area of Specializations
:
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
Computer Science
: Network Security & Cryptography,
Digital Analysis of Algorithms,
Software Project Management
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: K V B Hanuma
2. Date of Birth
: 10-10-1983
3. Educational Qualification
: B.Tech.
4. Work Experience
Teaching
Research
Industry
Others
: 2 Months
:
-: 2 Years
:
--
5. Area of Specializations
: Information Technology
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Mobile Computing,
UNIX Programming
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
Vulnerability Assessment
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: A.N. Venkateswara Rao
2. Date of Birth
: 01-08-1983
3. Educational Qualification
: B.Tech. (CSIT)
M.Tech. (CSE)
4. Work Experience
Teaching
Research
Industry
Others
: 3 Years
:
-:
-:
--
5. Area of Specializations
:
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
Computer Science
: Operating Systems,
Database Management Systems, Java,C++
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended: Pursing M.Tech. through JNTU,
Summer School Programme
1.. Name
: B. Sirisha
2. Date of Birth
: 11-06-1982
3. Educational Qualification
: B.Tech.- (IT)
4. Work Experience
Teaching
Research
Industry
Others
: 5 Years
:
-:
-:
--
5. Area of Specializations
: Information Technology
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: C, C++, Operating Systems,
ACD, DAA
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Saladi Kousalya Devi
2. Date of Birth
: 02-04-1982
3. Educational Qualification
: B.Tech.- (IT)
4. Work Experience
Teaching
Research
Industry
Others
: 5 Years
:
-:
-:
--
5. Area of Specializations
: Information Technology
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Discrete Structures & Graph Theory,
Operating Systems, Database Management Systems,
Theory of Computation, Software Engineering
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: K Sri Latha
2. Date of Birth
: 29-01-1986
3. Educational Qualification
: B.Tech.- (IT)
4. Work Experience
Teaching
Research
Industry
Others
: 1 Year
:
-:
-:
--
5. Area of Specializations
: Information Technology
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Software Testing Methodologies,
Computer Organisation
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
: Telecommunication Services (B.Tech)
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: P Amaravathi
2. Date of Birth
: 10-05-1982
3. Educational Qualification
: B.Tech.(M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
:
:
:
:
5. Area of Specializations
: Computer Science
6. Subjects teaching at
Under Graduate Level
:
--
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
Post Graduate Level
7. Research guidance
No. of papers published in
-----
8. Projects Carried out
:
--
9. Patents
:
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
Department of Science and Humanities
1.. Name
: T Venkata Janardhana Rao
2. Date of Birth
: 12-09-1972
3. Educational Qualification
: B.E., M.B.A. (Ph.D)
4. Work Experience
Teaching
Research
Industry
Others
: 12 Years
:
-:
-:
--
5. Area of Specializations
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: B.E.-Electronics
M.B.A.-Marketing & Finance
: Managerial Economics & Financial Analysis,
Management Science, Operations Research
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
PG level guided morethan 50 projects
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: B. Hema Sundar Raju
2. Date of Birth
: 25-08-1973
3. Educational Qualification
: M.Sc. (Tech.), M.Phil.
4. Work Experience
Teaching
Research
Industry
Others
: 12 Years
:
-:
-:
--
5. Area of Specializations
: Number Theory
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Mathematics – I, Mathematics – II, Mathematics – III,
Mathematical Methods, Probability Statistics,
Real Analysis, Modern Algebra, Linear Algebra,
Number Theory, Numerical Analysis and Special
Functions, Theory of Equations
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Sheik Abdul Sattar
2. Date of Birth
: 10-12-1971
3. Educational Qualification
: M.Sc., M.Phil., (Ph.D)
4. Work Experience
Teaching
Research
Industry
Others
: 13 Years
:
-:
-:
--
5. Area of Specializations
: Nuclear Physics
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Applied Physics, Engineering Physics,
Optical Communications
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
: One paper published in an international
journal x-ray spectrometry
12. No. of Books published
with details
:
13. Summer/Winter School attended:
--
--
1.. Name
: G.B. Chandra Mouli
2. Date of Birth
: 08-09-1973
3. Educational Qualification
: M.Sc., M.Phil.
4. Work Experience
Teaching
Research
Industry
Others
: 11 Years
:
-:
-:
--
5. Area of Specializations
: Applied Mathematics
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Mathematics – I, Mathematics – II,
Mathematics – III, Mathematical Methods,
Probability & Statistics
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: S. Rama Krishna
2. Date of Birth
: 18-08-1977
3. Educational Qualification
: M.B.A., M.M.M., M.Phil.
M.A.
4. Work Experience
Teaching
Research
Industry
Others
: 7 Years
:
-:
-:
--
5. Area of Specializations
: Finance & Marketing
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Management Science,
Managerial Economics & Financial Analysis
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: J N V Somayajulu
2. Date of Birth
: 15-04-1976
3. Educational Qualification
: M.Sc., B.Ed.
4. Work Experience
Teaching
Research
Industry
Others
: 8 Years
:
-: 2 Years
:
--
5. Area of Specializations
:
6. Subjects teaching at
Under Graduate Level
: Mathematics & Reasoning
Post Graduate Level
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: S Tatayya Naidu
2. Date of Birth
: 06-03-1978
3. Educational Qualification
: M.Sc (M.Phil.)
4. Work Experience
Teaching
Research
Industry
Others
: 6 Years
:
-:
-:
--
5. Area of Specializations
: Solid State Physics
6. Subjects teaching at
Under Graduate Level
: Applied Physics , Engineering Physics
Post Graduate Level
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: N Phani Kumar
2. Date of Birth
: 25-07-1983
3. Educational Qualification
: M.Sc.
4. Work Experience
Teaching
Research
Industry
Others
: 2 Years
:
-:
-:
--
5. Area of Specializations
: Applied Mathematics
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Mathematics – I, Mathematical Methods,
Probability & Statistics
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: A Naveen Chandra
2. Date of Birth
: 31-05-1975
3. Educational Qualification
: M.Sc., B.Ed.(M.Tech.)
4. Work Experience
Teaching
Research
Industry
Others
: 8 Years
:
-:
-:
--
5. Area of Specializations
: Physics
6. Subjects teaching at
Under Graduate Level
: Physics
Post Graduate Level
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: M S S Bharathi
2. Date of Birth
: 15-08-1985
3. Educational Qualification
: M.Sc.
4. Work Experience
Teaching
Research
Industry
Others
: 1 Year
:
-:
-:
--
5. Area of Specializations
: Physics(pure)
6. Subjects teaching at
Under Graduate Level
: Applied Physics
Post Graduate Level
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: M H S Padma
2. Date of Birth
: 10-06-1981
3. Educational Qualification
: M.A.(English)
4. Work Experience
Teaching
Research
Industry
Others
: 6 Years
:
-:
-:
--
5. Area of Specializations
: English - Twentieth Century Literature
6. Subjects teaching at
Under Graduate Level
: English
Post Graduate Level
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: K Ramesh Babu
2. Date of Birth
: 01-06-1975
3. Educational Qualification
: M.Sc.
4. Work Experience
Teaching
Research
Industry
Others
: 8 Years
:
-:
-:
--
5. Area of Specializations
: English
6. Subjects teaching at
Under Graduate Level
: English
Post Graduate Level
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: G S V Prasad
2. Date of Birth
: 01-07-1981
3. Educational Qualification
: M.Sc., B.Ed.
4. Work Experience
Teaching
Research
Industry
Others
: 1 Year
:
-:
-:
--
5. Area of Specializations
: Environmental Science
6. Subjects teaching at
Under Graduate Level
: Environmental Studies
Post Graduate Level
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Y Anuradha
2. Date of Birth
: 01-04-1976
3. Educational Qualification
: M.Com., M.A., ICWA-Inter,
PGDCA., (MBA)
4. Work Experience
Teaching
Research
Industry
Others
: 3 Years
:
-: 2 Years
:
--
5. Area of Specializations
:
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
: Managerial Economics & Financial Analysis,
BCRW, Advanced Accountancy, Contract Act,
Rural Marketing
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
1
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: A Durga Prasad
2. Date of Birth
: 12-08-1982
3. Educational Qualification
: M.Sc.
4. Work Experience
Teaching
Research
Industry
Others
:
-:
-: 2 Years
:
--
5. Area of Specializations
: Electronics
6. Subjects teaching at
Under Graduate Level
Post Graduate Level
:
:
---
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
2
--
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
1.. Name
: Payasam Srinivasa Rao
2. Date of Birth
: 20-08-1979
3. Educational Qualification
: B.A., M.P.Ed. N.I.S., DCA.
4. Work Experience
Teaching
Research
Industry
Others
: 10 Years
:
-:
-:
--
5. Area of Specializations
: Physical Education
6. Subjects teaching at
Under Graduate Level
: Physical Education
Post Graduate Level
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended: N.I.S (Hand Ball)
1.. Name
: M. Akhil Kumar
2. Date of Birth
: 19-08-1977
3. Educational Qualification
: M.Com., M.L.I.Sc.(M.Phil.)
4. Work Experience
Teaching
Research
Industry
Others
: 8 Years
:
-:
-:
--
5. Area of Specializations
: Academic Libraries
6. Subjects teaching at
Under Graduate Level
:
--
:
--
:
--
Masters’s - National Journals :
Ph.D. - International Journals :
- Conferences
:
----
Post Graduate Level
7. Research guidance
No. of papers published in
8. Projects Carried out
9. Patents
:
:
---
10. Technology Transfer
:
--
11. Research Publications
:
--
12. No. of Books published
with details
:
--
13. Summer/Winter School attended:
--
MD ENCLOSURE - III
List of Experimental Setup
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electrical & Electronics Engineering
(07A40292) ELECTRICAL MACHINES LAB - I
II B.Tech (EEE) II-SEMESTER
RO7
1. Magnetization Characteristics of D.C Shunt Generator. Determination of
Critical Field Resistance & Critical Speed.
2. Load Test on D.C Shunt Generator. Determination of Characteristics.
3. Load Test on D.C Series Generator. Determination of Characteristics.
4. Load Test on D.C Compound Generator. Determination of Characteristics
5. Hopkinson’s Test on D.C Shunt Machines. Predetermination of Efficiency .
6. Field’s Test on D.C Shunt Machines. Determination of Efficiency.
7. Swinburne’s Test on D.C Shunt Machine. Predetermination of Efficiencies.
8. Brake Test on D.C Compound Motor. Determination of Performance
Curves.
9. Brake Test on D.C Shunt Motor. Determination of Performance Curves.
10. Retardation test on DC shunt motor. Determination of losses at rated
speed.
11. Separation of losses in DC shunt motor.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electrical & Electronics Engineering
(07A30292) ELECTRICAL CIRCUITS AND SIMULATION LAB
II B.Tech (EEE) I Semester
R07
PART – A : ELECTRICAL CIRCUITS
1. Thevenin’s , Nortons and Maximum Power Transfer theorems
2. Superposition RMS Value of a complex wave
3. Verification of Compensation Theorem
4. Reciprocity, Millmann’s Theorems
5. Locus Diagrams of RL and RC Series Circuits
6. Series and Parallel Resonance
7. Determination of Self & mutual inductance and coefficient of coupling
8. Z and Y parameters
9. Transmission and hybrid parameters
10. Measurement of Active Power for Star and Delta connected balanced loads
11. Measurement of Reactive Power for Star and Delta connected balanced
loads
12. Measurement of 3-phase Power by two Wattmeter Method for unbalanced
loads
PART – B : PSPICE SIMULATION
1.
2.
3.
4.
Simulation of DC Circuits
DC Transient response
Mesh Analysis
Nodal Analysis
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electrical & Electronics Engineering
(07A30291) FLUID MECHANICS AND HYDRAULIC MACHINES LAB
II B.Tech (EEE) I Semester
R 07
1. Impact of jets on Vanes
2. Performance Test on Pelton Wheel
3. Performance Test on Francis Turbine
4. Performance Test on Kaplan Turbine
5. Performance Test on Single Stage Centrifugal Pump
6. Performance Test on Multi Stage Centrifugal Pump
7. Calibration of Venturimeter
8. Calibration of Orifice meter
9. Determination of friction factor for a given pipe line
10. Determination of loss of head due to sudden contraction in a pipeline
11. Turbine flow meter
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electrical & Electronics Engineering
(EE 05520) SIMULATION OF ELECTRICAL SYTEM LAB
IV B.TECH (EEE) I Semester
R 05
1. Pspice simulation of transient of RLC circuits
a) Response to pulse input
b) Response to step input
c) Response to sinusoidal input
2. Analysis of three phase circuit representing the generator transmission line
and load. Plot three phase currents & neural current using PSPICE.
3. Pspice simulation of single – phase full converter using RL 7 E loads and
single phase AC voltage controller using RL & E loads.
4. Pspice simulation of Resonant pulse commutation circuit and Buck copper.
5. Pspice simulation of single phase inverter with PWM control.
6. Plotting of Bode plots, root locus and Nyquist plots for the transfer functions of
systems up to 5th order using MATLAB.
7. Transfer function analysis of any given system upto 3rd order using SINULINK.
8. Power flow solution and Transient stability of Power System.
9. PSPICE simulation of Op-Amp based Integrator & Differentiator circuits.
10. Simulation of Dynamical Systems (Single area and two areas Power Systems)
using SIMULINK.
11. PSPICE simulation of DC Circuits (Thevenin’s Equivalent, Transfer
Function).
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electrical & Electronics Engineering
(EE 05405) MICROPROCESSORS AND MICROCONTROLLERS LAB
BRANCH:- IV B.TECH –I SEM (EEE)
I.
Microprocessor 8086
R 05
:
1. Introduction to MASM / TASM.
2. Arithmetic operation – Multi byte Addition and Subtraction, Multiplication and
Division – Signed and unsigned Arithmetic operation, ASCII – arithmetic
operation.
3. Logic operations – Shift and rotate – Converting packed BCD to unpacked
BCD, BCD to ASCII conversion.
4. By using string operation and Instruction preflix : Move Block, Reverse string,
Sorting, Inserting, Deleting, Length of the string, String comparison.
5. DOS/BIOS programming : Reading keyboard (Buffered with and without
echo) –Display characters, Strings.
II.
Interfacing
1.
2.
3.
4.
III.
8259
8279
8255
8251
-
:
Interrupt Controller
Keyboard Display
PPI
USART
Microcontroller 8051
1.
Reading and Writing on a parallel port.
2.
Timer in different modes.
3.
Serial communication implementation.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electrical & Electronics Engineering
(EE 05150) CONTROL SYSTEMS LAB
III B.TECH (EEE) I Semester
R 05
The following experiments are required to be conducted as compulsory
experiments :
1. Time response of Second order system.
2. Characteristics of Synchros.
3. Programmable logic controller – Study and Verification of truth tables of logic
gates, simple Boolean expressions and application of speed control of motor.
4. Effect of feedback on DC servo motor.
5. Transfer function of DC motor.
6. Effect of P, PD, PI, PID Controller on a second order systems.
7. State space model for classical transfer function using MATLAB – Verification.
8. Simulation of Transfer functions using operational amplifier.
9. Characteristics of magnetic amplifiers.
10. Root locus plot, Bode Plot from MATLAB.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electrical & Electronics Engineering
(EE 05197) ELECTRICAL MACHINES LAB – II
III B.TECH (EEE) I Semester
R 05
The following experiments are required to be conducted as compulsory
experiments :
1. O.C. & S.C. Tests on Single phase Transformer.
2. Sumpner’s test on a pair of single phase transformers.
3. Scott connection of transformers.
4. No-load & Blocked rotor tests on three phase Induction motor.
5. Regulation of a three – phase alternator by synchronous impedance & m.m.f.
methods.
6. V and Inverted V curves of a three – phase synchronous motor.
7. Equivalent Circuit of a single phase induction motor.
8. Determination of Xd and Xq of a salient pole synchronous machine.
9. Separation of core losses of a single phase transformer.
10. Brake test on three phase Induction Motor.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electrical & Electronics Engineering
(EE 05199) ELECTRICAL MEASUREMENT LAB
III B.TECH (EEE) II Semester
R05
The following experiments are required to be conducted as compulsory experiments
:
1. Calibration and Testing of single phase energy Meter.
2. Calibration of dynamometer power factor meter.
3. Crompton D.C. Potentiometer – Calibration of PMMC ammeter and PMMC
voltmeter.
4. Kelvin’s double Bridge – Measurement of resistance – Determination of
Tolerance.
5. Measurement of % ratio error and phase angle of given C.T. by comparison.
6. Schering bridge & Anderson bridge.
7. Measurement of 3 phase reactive power with single-phase wattmeter.
8. Measurement of parameters of a choke coil using 3 voltmeter and 3 ammeter
methods.
9. Measurement of 3 phase power with single watt meter and 2 No’s of C.T.
10. Dielectric oil testing using H.T. testing Kit.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electrical & Electronics Engineering
(EE 05460) POWER ELECTRONICS LAB
III B.TECH (EEE) II Semester
R05
The following experiments are required to be conducted as compulsory
experiments :
1. Study of Characteristics of SCR, MOSFET & IGBT.
2. Gate firing circuits for SCR’s.
3. Single Phase AC Voltage Controller with R and RL Loads.
4. Single Phase fully controller bridge converter with R and RL loads.
5. Forced Commutation circuits ( Class A, Class B, Class C, Class D & Class E).
6. DC Jones chopper with R and RL Loads.
7. Single Phase Parallel, inverter with R and RL loads.
8. Single Phase Cycloconverter with R and RL loads.
9. Single Phase Half controller converter with R load.
10. Single Phase series inverter with R and RL loads.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Computer Science Egnineering
I B.Tech. (CSE)
R07
(07A10592) COMPUTER PROGRAMMING LAB
UNIT – I
a)
b)
c)
Write a C program to find the sum of individual digits of a positive integer.
A Fibonacci Sequence is defined as follows : the first and second terms in the
sequence are 0 and 1. Subsequent terms are found by adding the preceding two
terms in the sequence. Write a C program to generate the first n terms of the
sequence.
Write a C program to generate all the prime numbers between 1 and n, where n is
a value supplied by the user.
UNIT – II
a)
b)
Write a C program to calculate the following Sum :
Sum = 1-x2/2! +x4/4!-x6/6!+x8/8!-x10/10!
Write a C program to find the roots of a quadratic equation.
UNIT – III
a)
Write C programs that use both recursive and non-recursive functions
i)
To find the factorial of a given integer.
ii)
To find the GCD (greatest common divisor) of two given integers.
iii)
To solve Towers of Hanoi problem.
UNIT – IV
a)
The total distance traveled by vehicle in ‘t’ seconds is given by distance =
ut+2/3at2 where ‘u’ and ‘a’ are the initial velocity (m/sec.) and acceleration
(m/sec2). Write C program to find the distance traveled at regular intervals of
time given the values of ‘u’ and ‘a’. The program should provide the flexibility to
the user to select his own time intervals and repeat the calculations for different
values of ‘u’ and ‘a’.
b)
Write a C program, which takes two integer operands and one operator form the
user, performs the operation and then prints the result. (Consider the
operators +,-,*,/,% and use Switch Statement).
UNIT – V
a)
b)
Write a C program to find both the largest and smallest number in a list of
integers.
Write a C program that uses functions to perform the following :
i)
Addition of Two Matrices
ii)
Multiplication of Two Matrices
UNIT – VI
a)
Write a C program that uses functions to perform the following operations :
i)
To insert a sub-string in to given main string from a given position.
ii)
To delete n Characters from a given position in a given string.
b)
Write a C program to count the lines, words and characters in a given text.
UNIT – VII
a)
b)
Write a C program that displays the position or index in the string S where
the String T begins, or – 1 if S does not contain T.
Write a C program to count the lines, words and characters in a given text.
UNIT – VIII
a)
b)
Write a C program to generate Pascal’s triangle.
Write a C program to construct a pyramid of numbers.
UNIT – IX
Write a C program to read in two numbers, x and n, and then compute the sum of this
geometric progression : 1 + x + x2 + x3 + ………………. + xn
For example : If n is 3 and x is 5, then the program computes 1 + 5 + 25 + 125.
Print x, n, the sum Perform error checking. For example, the formula does not make
sense for negative exponents – if n is less than 0. Have your program print an error
message if n < 0 , then go back and read in the next pair of numbers of without
computing the sum. Are any values of x also illegal ? If so, test for them too.
UNIT – X
a)
b)
2’s complement of a number is obtained by scanning it from right to left
and complementing all the bits after the first appearance of a 1. Thus 2’s
complement of 11100 is 00100. Write a C program to find the 2’s
complement of a binary number.
Write a C program to convert a Roman number to its decimal equivalent.
UNIT – XI
Write a C program that uses functions to perform the following questions :
i)
Reading a complex number
ii)
Writing a complex number
iii)
Addition of two complex numbers
iv)
Multiplication of two complex numbers
(Note : represent complex number using a structure.)
UNIT – XII
a)
Write a C program which copies one file to another.
b)
Write a C program to reverse the first n character in a file.
(Note : The file name and n are specified on the command line.)
UNIT – XIII
Write a C program that uses functions to perform the following operations on singly
linked list :
i) Creation
ii) Insertion
iii) Deletion iv) Traversal
UNIT – XIV
Write a C program that uses functions to perform the following operations on doubly
linked list.
i) Creation
ii) Insertion
iii) Deletion iv) Traversal in both ways
UNIT – XV
Write a C program that implement stack (its operations) using
i) Arrays
ii) Pointers
UNIT – XVI
Write a C program that implement Queue (its operations) using
i) Arrays
ii) Pointers
UNIT – XVII
Write a C program that uses Stack operations to perform the following :
i)
ii)
Converting infix expression into postfix expression
Evaluating the postfix expression
UNIT – XVIII
Write a C program that uses functions to perform the following :
i) Creating a Binary Tree of integers
ii) Traversing the above binary tree in preorder, inorder and postorer.
UNIT – XIX
Write C programs that use both recursive and non recursive functions to perform
the following searching operations for a Key value in a given list of integers :
i)
Linear search
ii)
Binary search
UNIT – XX
Write C programs that implement the following sorting methods to sort a given
list of integers in ascending order :
i)
Bubble sort
ii) Quick sort
UNIT – XXI
Write C program that implement the following sorting methods to sort a given list
of integers in ascending order :
i)
Insertion sort
ii)
Merge sort
UNIT – XXII
Write C programs to implement the Lagrange interpolation and Newton-Gregory forward
interpolation.
UNIT – XXIII
Write C programs to implement the linear regression and polynomial regression
algorithms.
UNIT – XXIV
Write C programs to implement Trapezoidal and Simpson methods.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Computer Science & Engineering
II B.Tech I Sem.(CSE)
R07
(07A30591) ADVANCED DATA STRUCTURES (C++) LAB
1.
Write C++ programs to implement the following using an array.
a) Stack ADT b) Queue ADT
2.
Write C++ programs to implement the following using a singly linked list.
a) Stack ADT b)Queue ADT
3.
Write C++ program to implement the deque (double ended queue) ADT using a
doubly linked list.
4.
Write a C++ program to perform the following operations:
a) Insert an element into a binary search tree.
b) Delete an element from a binary search tree.
c) Search for a key element in a binary search tree.
5.
Write a C++ program to implement circular queue ADT using an array.
6.
Write C++ programs that use non-recursive functions to traverse the given
binary tree in
a) Preorder b) inorder and c) postorder
7.
Write a
graph.
8.
Write C++ programs for implementing the following sorting methods:
a) Quick sort
b) Merge sort c) Heap sort
9.
Write a C++ program to perform the following operations
a) Insertion into a B-tree b)Deletion from a B-tree
10.
Write a C++ program to perform the following operations
a) Insertion into an AVL-tree b) Deletion from an AVL-tree
11.
Write a C++ program to implement Kruskal’s algorithm to generate a minimum
spanning tree.
12.
Write a C++ program for implementing Knuth-Morris pattern matching
algorithm
13.
Write a C++ program to implementing Boyer – Moore Pattern matching
algorithm .
C++ programs for the implementation of BFS and DFS for a given
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Computer Science & Engineering
II B.Tech I Sem.(CSE)
R07
(07A30592) UNIX AND SHELL PROGRAMMING LAB
WEEK 1
Session – 1
a)
b)
c)
d)
e)
Log into the system
Use vi editor to create a file called myfile.txt which contains some text.
Correct typing errors during creation.
Save the file.
Logout of the system
Session – 2
a)
b)
c)
d)
e)
f)
g)
Log into the system
Open the file created in session 1
Add some text
Change some text
Delete some text
Save the Changes
Logout of the system.\
WEEK 2
a)
b)
Log into the system
use the cat command to create a file containing the following data. Call it
mytable use tabs to separate the fields.
1425
4320
6830
1450
c)
d)
e)
Ravi
Ramu
Sita
Raju
15.65
26.27
36.15
21.86
Use the cat command to display the file, mytable.
Use the vi command to correct any errors in the file, mytable.
Use the sort command to sort the file mytable according to the first field.
Call the sorted file my table (same name):
f)
g)
h)
i)
Print the file mytable.
Use the cut and paste commands to swap fields 2 and 3 of mytable. Call it
my table (same name).
Print the new file, mytable
Logout of the system
WEEK 3
1)
a)
b)
c)
d)
Login to the system
Use the appropriate command to determine your login shell
Use the /etc/passwd file to veriy the result of step b.
Use the date and who commands in sequence (in one line) such that
the output of date will display on the screen and the output of who
will be redirected to a file called myfile2. Use the more command to
check the contents of myfile2.
2)
a)
Write a sed command that deletes the first character in each line in a
file.
Write a sed command that deletes the character before the last
character in each line in a file.
Write a sed command that swaps the first and second words in each
line in a file.
b)
c)
WEEK 4
a)
b)
c)
d)
Pipe your /etc/passwd file to awk, and print out the home directory of each
user.
Develop an interactive grep script that asks for a word and a file name and
then tells how many lines contain that word.
Repeat
Part using awk
WEEK 5
a)
b)
Write a shell script that takes a command – line argument and reports on
whether it is directory, a file, or something else.
Write a shell script that accepts one or more file name as arguments and
converts all of them to uppercase, provided they exist in the current
directory.
c)
Write a shell script that determines the period for which a specified user is
working on the system.
WEEK 6
a)
b)
Write a shell script that accepts a file name starting and ending line
numbers as arguments and displays all the lines between the given line
numbers.
Write a shell script that deletes all lines containing a specified word in one
or more files supplied as arguments to it.
WEEK 7
a)
b)
Write a shell script that computes the gross salary of a employee according
to the following rules :
i)
If basic salary is < 1500 then HRA = 10 % of the basic and
DA = 90 % of the basic.
ii)
If basic salary is > = 1500 then HRA = Rs.500 and DA = 98 % of
the basic. The basic salary is entered interactively through the key
board.
Write a shell script that accepts two integers as its arguments and
computers the value of first number raised to the power of the second
number.
WEEK 8
a)
b)
c)
Write an interactive file-handling shell program. Let it offer the user the
choice of copying, removing, renaming, or linking files. Once the user has
made a choice, have the program ask the user for the necessary information,
such as the file name, new name and so on.
Write shell script that takes a login name as command – line argument and
reports when that person logs in
Write a shell script which receives two file names as arguments. It should
check whether the two file contents are same or not. If they are same then
second file should be deleted.
WEEK 9
a)
Write a shell script that displays a list of all the files in the current directory
to which the user has read, write and execute permissions.
b)
c)
Develop an interactive script that ask for a word and a file name and then
tells how many times that word occurred in the file.
Write a shell script to perform the following string operations
i)
To extract a sub-string from a given string.
ii)
To find the length of a given string.
WEEK 10
Write a C program that takes one or more file or directory names as command line
input and reports the following information on the file :
i)
ii)
iii)
iv)
File type
Number of links
Read, write and execute permissions
Time of last access
WEEK 11
Write C programs that simulate the following unix commands :
a)
b)
mv
cp
(use system calls)
WEEK 12
Write a C program that simulates is Command
(Use system calls / directory API)
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Computer Science & Engineering
II B.Tech II Sem.(CSE)
R07
(07A40592) DATABASE MANAGEMENT SYSTEMS LAB
1) Creation, altering and dropping of tables and inserting rows into a table (use
constraints while creating tables) examples using SELECT command.
2) Queries (along with sub Queries) using ANY, ALL, IN, EXISTS, NOTEXISTS,
UNION, INTERSET, Constraints.
Example : Select the roll number and name of the student who secured fourth rank
in the class.
3) Queries using Aggregate functions (COUNT, SUM, AVG, MAX and MIN),
GROUP BY, HAVING and Creation and dropping of Views.
4) Queries using Conversion functions (to_char, to_number and to_date), string
functions (Concavenation, Ipad, rpad, Itrim, rtrim, lower, upper, initcap, length,
substr and instr), date functions (Sysdate, next_day, add_months, last_day,
months_between, least, greatest, trunk, round, to_char, to_date)
(i)
Creation of simple PL/SQL program which includes declaration
section, executable section and exception-Handling section (Ex.
Student marks can be
selected from the table and printed for those
who secured first class and an
exception can be raised if no records
were found).
(ii)
Insert data into student table and use COMMIT, ROLLBACK and
SAVEPOINT
in PL/SQL block.
5) Develop a program that includes the features NESTED IF, CASE and CASE
expression. The program can be extended using the NULLIF and COALESCE
functions.
6) Program development using WHILE LOOPS, numeric FOR LOOPS, nested
loops using ERROR Handling, BUILT-IN Exceptions, USE defined Exceptions,
RAISE-APPLICATION ERROR.
7) Programs development using creation of procedures, passing parameters IN and
OUT of PROCEDURES.
8) Program development using creation of stored functions, invoke functions in SQL
Statements and write complex functions.
9) Program development using creation of package specification, package bodies,
private objects package variables and cursors and calling stored packages.
10) Develop programs using features parameters in a CURSOR, FOR UPDATE
CURSOR, WHERE CURRENT of clause and CURSOR variables.
11) Develop Programs using BEFORE and AFTER Triggers, Row and Statement
Triggers and INSTEAD OF Triggers.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Computer Science & Engineering
II B.Tech II Sem.(CSE)
R07
(07A30392) OBJECT ORIENTED PROGRAMMING LAB
1. Write a Java program that prints all real solutions to the quadratic equation
ax2+bx+c=0. Read in a,b,c and use the quadratic formula. If the discriminant b2-4ac is
negative, display a message stating that there are no real solutions.
2. The Fibonacci sequence is defined by the following rule. The first two values in the
sequence are 1 and 1. Every subsequent value is the two preceeding it. Write a Java
program that uses both recursive and non recursive functions to print the nth value in the
Fibonacci sequence.
3. Write a java program that prompts the user for an integer and then prints out all prime
numbers up to that integer.
4. Write a java program to multiply two given matrices
5. Write a java program that reads a line of integer and then displays sum of all the
integers.
6. Write a java program that checks whether the given string is palindrome or not.
MADAM is a palindrome.
7. Write a java program for sorting a give list of names in ascending order.
8. Write a java program that reads on file name from the user and then displays
information about whether the file exists, whether the file is readable or writable, the type
of file and the length of the file in bytes.
9. Write a java program that reads a file and displays a file on the screen, with a line
number before each line.
10 Write a java program that displays the number of characters, lines and words in a text
file.
11. Write a java program that :
a) Implements stack ADT
b) Converts infix expression into Postfix form
12. Write an applet that displays a simple message.
13. Write an applet that receives an integer in one text field, and computes its factorial
value and returns it in another text field, when the button named “Compute” is clicked.
14. Write a java program that works as a simple calculator. Use a grid layout to arrange
buttons for the digits and for the + - * % operations. Add a text field to display the result
15. Write a java program for handling mouse events
16. Write a java program that creates three threads. First thread displays “Good
Morning” every one second, the second thread displays “Hello” every two seconds and
the third thread displays “Welcome” every three seconds.
17. Write a java program that correctly implements producer consumer problem using the
concept of inter thread communication.
18. Write a program that creates a user interface to perform integer divisions. The user
enters two numbers in the text fields, Num 1 and Num 2. The division of Num1 and
Num2 is displayed in the Result field when the Divide button is clicked. If Num1 or
Num2 were not an integer, the program would throw a Number Formal Exception. If
Num2 were Zero, the program would throw an Arithmetic Exception Display the
exception in a message dialog box.
19. Write a java program that implements a simple client / server application. The client
sends data to a server. The server receives the data, uses it to produce a result, and then
sends the result back to the client. The client displays the result on the console. For ex.
The data sent from the client is the radius of a circle, and the result produced by the
server is the area of the circle.
20. Write a java program that simulates a traffic light. The program lets the user select
one of three lights: red, yellow, or green. When a radio button is selected, the light is
turned on, and only one light can be on at a time No light is on when the program starts.
21. Write a java program allows the user to draw lines, rectangle and Ovals.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Computer Science & Engineering
(CS 05564) UML LAB
III B.Tech I Sem. CSE
R05
1. The student should take up the case study of Unified Library application which is
mentioned in the theory, and Model it in different views i.e. Use case view,
logical view, component view, Deployment view, Database design, forward and
Reverse Engineering, and Generation of documentation of the project.
2. Student has to take up another case study of his/her own interest and do the same
what ever mentioned in first problem. Some of the ideas regarding case studies
are given in reference books which were mentioned in theory syllabus can be
referred for some ideas.
Note : The analysis, design, coding, documentation, database design of mini project
which will be carried out in 4th year should be done in object-oriented approach using
UML and by using appropriate software which supports UML, otherwise the mini
project
will not be evaluated.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Computer Science & Engineering
(CS 05139) COMPUTER NETWORKS AND OPERATING SYSTEMS LAB
III B.Tech I Sem. CSE
R05
Part - A
1. Implement the data link layer framing methods such as character, character
stuffing and bit stuffing.
2. Implement on a data set of characters the three CRC polynomials – CRC 12, CRC
16 and CRC CCIP.
3. Implement Dijkstra’s algorithm to compute the shortest path thru a graph.
4. Take an example subject graph with weights indicating delay between nodes.
Now obtain Routing table art each node using distance vector routing algorithm.
5. Take an example subject of hosts. Obtain broadcast tree for it.
6. Take a 64 bit playing text and encrypt the same using DES algorithm.
7. Write a program to break the above DES coding.
8. Using RSA algorithm Encrypt a text data and Decrypt the same.
Part - B
1. Simulate the following CPU scheduling algorithms.
a) Round Robin
b) SJF
c) FCFS
2. Simulate all file allocation strategies
a) Sequential
b) Indexed
c) Linked
3. Simulate MVT and MFT
4. Simulate all File Organization Techniques
d) Priority
a) Single level directory
DAG
b) Two level
c) Hierarchical
5. Simulate Bankers Algorithm for Dead Lock Avoidance
6. Simulate Bankers Algorithm for Deal Lock Prevention
7. Simulate all page replacement algorithms
a) FIFO
b) LRU
c) LFU Etc.,
8. Simulate Paging Technique of memory management
d)
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Computer Science & Engineering
(CS 05318) INFORMATION SECURITY LAB
III B.Tech II Sem. CSE
R05
1. Working with Sniffers for monitoring network communication (Ethereal).
2. Understanding of cryptographic algorithms and implementation of the same in C
or C++.
3. Using openssl for web server – browser communication.
4. Using GNU PGP.
5. Performance evaluation of various cryptographic algorithms.
6. Using IPTABLES on Linux and setting the filtering rules.
7. Configuring S/MIME for e-mail communication.
8. Understanding the buffer overflow and format string attacks.
9. Using NMAP for ports monitoring.
10. Implementation of proxy based security protocols in C or C++ with features like
confidentiality, integrity and authentication.
Following are some of the web links, which help to solve the above assignments :
•
http://linuxcommand.org/man_pages/openss/1.html
•
http://www.openssl.org/docs/apps/openssl.html
•
http://queen.clara.net/pgp/art3.html
•
http://www.ccs.ornl.gov/-hongo/main/resources/contrib/gpg-howto.html
•
https://netfiles.uiuc.edu/ehowes/www/gpg/gpg-com-0.htm
•
http://www.ethereal.com/docs/user-guide/
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Computer Science & Engineering
(CS 05567) UNIX PROGRAMMING AND COMPILER DESIGN LAB
III B.Tech II Sem. CSE
R05
PART – A
1. Write a shell script tp generate a multiplication table.
2. Write a shell script that copies multiple files to a directory.
3. Write a shell script which counts the number of lines and words present in a given
file.
4. Write a shell script which displays the list of all files in the given directory.
5. Write a shell script (small calculator) that adds, subtracts, multiplies and divides
the given two integers. There are two division options : one returns the quotient
and the other returns reminder. The script requires 3 arguments : The operation to
be used and two integer numbers. The options are add(-a), subtract (-s), multiply
(-m), quotient (-c) and reminder (-r).
6. Write a shell script to reverse the rows and columns of a matrix.
7. Write a C program that counts the number of blanks in a text file.
(a) using standard I/Q(b) using system calls.
8. Implement in C the following Unix commands using system calls.
(a) cat
(b) is
(c) mv
9. Write a program that takes one or more file/directory names as command line
input and reports the following information on the file :
(c) File type
(d) Number of links
(e) Time of last access
(f) Read, Write and Execute permissions.
10. Write a C program that illustrates how to execute two commands concurrently
with a command pipe.
11. Write a C program that illustrates the creation of child process using fork system
call.
12. Write a C program that displays the real time of a day every 60 seconds.
13. Write a C program that illustrates file locking using semaphores.
14. Write a C program that implements a producer-consumer system with two
processes. (using semaphores).
15. Write a C program that illustrates inter process communication using shared
memory system calls.
16. Write a C program that illustrates the following.
(g)
Creating a message queue.
(h)
Writing to a message queue.
(i)
Reading from a message queue.
PART - B
Objective : To provide an understanding of the language translation peculiarities by
designing a complete translator for a mini language.
Consider the following mini Language, a simple procedural high-level language, only
operating on integer data, with a syntax looking vaguely like a simple C crossed with
Pascal. The syntax of the language is defined by the following BNF grammar.
<program> :: = <block>
<block> :: = { <variabledefinition><slist>}
| { <slist> }
<variabledefinition> :: = int <vardeflist> ;
<vardecflist> :: = <vardec> | <vardec> , <vardeflist>
<vardec> :: = <identifier> | <identifier> [ <constant>]
<slist> ::= <statement> ; <slist>
<statement>::=<assignment> | <ifstatement> | <whilestatement>
| <block> | <printstatement> | <empty>
<assignment>::= <identifier> = <expression>
| <identifier> [<expression> = <expression>
<ifstatement> ::= if <bexpression> then <slist> else <slist> endif
| if <bexpression> then <slist> endif
<whilestatement> ::= wguke <bexpression> do <slist> enddo
<printstatement> ::= print (<expression>)
<expression> ::= <expression> <addingop> <term> | <term> | <addingop> <term>
<bexpression> ::= <expression> <relop> <expression>
<relop> ::= < | < = | = = | >= | > | !=
<addingop> ::= + | <term> :: = <term> <multop> <factor> | <factor>
<multop> ::= * | /
<factor> ::= <constant> | <identifier> | <identifier> | <expression>
| (<expression> )
<constant> ::= <digit> | <digit> <constant>
<identifier>::= <identifier> <letterordigit> | <letter>
<letterordigit> ::= <letter> | <digit>
<letter> ::= a|b|c|d|e|f|g|h|i|j|k|l|m|n|o|p|q|r|s|t|u|v|w|x|y|z
<digit> ::= 0|1|2|3|4|5|6|7|8|9
<empty> has the obvious meaning
comments (zero or more characters enclosed between the standard C/Java-style comment
brackets/ * … */) can be inserted. The language has rudimentary support for 1dimensional arrays. The declaration int a[3] declares an array of three elements,
referenced as a [0], a[1] and a[2]. Note also that you should worry about the scoping of
names.
A simple program written in this language is :
{ int a [3],t1,t2;
t1 = 2 ;
a[0] = 1; a [1] = 2; a [t1] = 3 ;
t2 = -(a[2] + 1*6) / (a [2] – t1 ) ;
if t2 > 5 then
print (t2) ;
else {
int t3;
t3 = 99 ;
t2 = -25 ;
print (-t1 + t2* t3) ; /* this is a comment
on 2 lines */
Design a Lexical analyzer for the above language. The lexical analyzer should ignore
redundant spaces, tabs and newlines. It should also ignore comments. Although the syntax
specification states that identifiers can be arbitrarily long, you may restrict the length to
some reasonable value.
1. Implement the lexical analyzer using JLex, flex or lex or other lexical analyzer
generating tools.
2. Design predictive parser for the given language.
3. Design LALR bottom up parser for the above language.
4. Convert the BNF rules into Yacc form and write code to generate abstract syntax tree.
5. Write program to generate machine code from the abstract syntax tree generated by the
parser. The following instruction set may be considered as target code.
The following is a simple register-based machine, supporting a total of 17 instructions.
It has three distinct internal storage areas. The first is the set of 8 registers, used by the
individual instructions as detailed below, the second is an area used for the storage of
variables and the third is an area used for the storage of program. The instructions can
be preceded by a label. This consists of an integer in the range 1 to 9999 and the label
is followed by a colon to separate it from the rest of the instruction. The numerical
label can be used as the argument to a jump instruction, as detailed below. In the
description of the individual instructions below, instruction argument types are
specified as follows :
R
specifies a register in the form R1, R1, R2, R3, R4, R5, R6 or R7 (or r1, r1, etc.).
L
specified a numerical label (in the range 1 to 9999)
V
specifies a “variable location” (a variable number, or a variable location pointed to by a
register – see below).
A
Specifies a constant value, a variable location, a register or a variable location pointed to
by a register (an indirect address). Constant values are specified as an integer value,
optionally preceded by a minus sign, preceded by a # symbol. An indirect address is
specified by an @ followed by a register. So, for example, an A-type argument could
have the form 4 (variable number 4), #4 (the constant value 4), r4 (register 4) or @ r4
(the contents of register 4 identifies the variable location to be accessed).
The instruction set is defined as follows :
LOAD A, R
loads the integer value specified by A into register R.
STORE R, V
stores the value in register R to variable V.
OUT R
outputs the value in register R.
NEG R
negates the value in register R.
ADD A, R
adds the value specified by A to register R, leaving the result in register R.
SUB A, R
subtracts the value specified by A from register R, leaving the result in register R.
MUL A, R
multiplies the value specified by A by register R, leaving the result in register R.
DIV A, R
divides register R by the value specified by A, leaving the result in register R.
JMP L
causes an unconditional jump to the instruction with the label L.
JEQ R, L
jumps to the instruction with the label L if the value in register R is zero.
JNE R, L
jumps to the instruction with the label L if the value in register R is not zero.
JGE R, L
jumps to the instruction with the label L if the value in register R is greater than or equal
to zero.
JGT R, L
jumps to the instruction with the label L if the value in register R is greater than zero.
JLE R, L
jumps to the instruction with the label L if the value in register R is less than or equal to
zero.
JLT R, L
jumps to the instruction with the label L if the value in register R is less than zero.
NOP
is an instruction with no effect. It can be tagged by a label.
STOP
stops execution of the machine. All programs should terminate by executing a STOP
instruction.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Computer Science Engineering
(CS 05580) WEB TECHNOLOGIES LAB
IV B.Tech I Sem. CSE
R05
1. Develop static pages (using Only HTML) of an online Book store. The pages
should resemble : www.amazon.com. The website should consist the following
pages.
Home pages
Registration and user Login
User Profile Page
Books catalog
Shopping Cart
Payment By credit card
Order Conformation
2. Validate the Registration, user login, user profile and payment by credit card
pages using JavaScript.
3. Create and save an XML document at the server, which contains 10 users
information. Write a program, which takes User Id as an input and returns the
user details by taking the user information from the XML document.
4. Bean Assignments
a.
Create a JavaBean which gives the exchange value of INR (Indian Rupees)
into equivalent American/Canadian/Australian Dollar value.
b.
Create a simple Bean with a label – which is the count of number of clicks.
Than create a BeanInfo class such that only the “count” property is visible in
the Property Window.
c.
Create two Beans – a) KeyPad b) DisplayPad. After that integrate the two
Beans to make it work as a Calculator.
d.
Create two Beans Traffic Light (Implemented as a Label with only three
background colours – Red, Green, Yellow) and Automobile (Implemented as
a TextBox which states its state/movement). The state of the Automobile
should depend on the following Light Transition Table.
Light Transition
Red
Yellow
Yellow
Green
Green
Red
Automobile State
Ready
Move
Stopped
5. Install TOMCAT web server. Convert the static web pages of assignments 2 into
dynamic web pages using servlets and cookies. Hint : Users information (user id,
password, credit cad number) would be stored in web.xml. Each user should have
a separate Shopping Cart.
6. Redo the previous task using JSP by converting the static web pages of
assignments 2 into dynamic web pages. Create a database with user information
and books information. The books catalogue should be dynamically loaded from
the database. Follow the MVC architecture while doing the website.
7. Implement the “Hello World!” program using JSP Struts Framework.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Computer Science Engineering
(CS 05217) EMBEDDED SYSTEMS LAB
IV B.Tech I Sem. CSE
1.
R05
Write a program to
a)
Read inputs from switches
b)
To make LEDs blink
2.
Write a Program for serial communication
3.
Write a program for encruption/decruption
4.
Develop necessary interfacing circuit to read data from a sensor and process
using the 8051 board. The data has to be displayed on a PC monitor.
5.
Sort RTOs (mCOS) on to 89CS1 board and Verify.
6.
Simulate on elevator movement using RTOs on 89CS board.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
I B.Tech (ME)
R07
(07A10393) ENGLISH LANGUAGE COMMUNICATION
SKILLS LAB
1. Introduction to the Sounds of English, Vowels, Diphthongs & Consonants.
2. Introduction to Stress and Intontion.
3. Situational Dialogues / Role Play.
4. Oral Presentations – Prepared and Extempore.
5. ‘Just a Minute’ Sessions (JAM).
6. Describing Objects / Situations / People.
7. Information Transfer.
8. Debate
9. Telephoning Skills.
10. Giving Directions.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
I B.Tech (ME)
R07
(07A10392) ENGINEERING PHYSICS AND FUELS
AND LUBRICANTS LAB
(A) ENGINEERING PHYSICS LAB
1.
Determination of Refractive Index of the material of a Prism – Spectrometer.
2.
Dispersive power of the material of a Prism – Spectrometer.
3.
Determination of wavelength of a source – Diffraction Grating.
4.
Determination of thickenss of a thin object using parallel fringes.
5.
Newton’s rings Radius of Curvature of plano-convex lens.
6.
Determination of Rigidity modulus of a material in the form of a wire –
Torsional pendulum.
7.
Melde’s Experiment – Transverse and Longitudinal modes.
8.
Time constant of R-C Circuit.
9.
L-C-R Circuit.
10.
Verification of laws of stretched string – Sonometer.
11.
Calculation of Frequency of A.C. mains – Sonometer.
12.
Magnetic, field along the axis of a current carrying coil – Stewart and Gee’s
method.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
I B.Tech (ME)
R07
(07A10394) Computer Programming Lab
UNIT – I
a)
b)
c)
Write a C program to find the sum of individual digits of a positive integer.
A Fibonacci Sequence is defined as follows : the first and second terms in the
sequence are 0 and 1. Subsequent terms are found by adding the preceding two
terms in the sequence. Write a C program to generate the first n terms of the
sequence.
Write a C program to generate all the prime numbers between 1 and n, where n is
a value supplied by the user.
UNIT – II
a)
b)
Write a C program to calculate the following Sum :
Sum = 1-x2/2! +x4/4!-x6/6!+x8/8!-x10/10!
Write a C program to find the roots of a quadratic equation.
UNIT – III
a)
Write C programs that use both recursive and non-recursive functions
i)
To find the factorial of a given integer.
ii)
To find the GCD (greatest common divisor) of two given integers.
iii)
To solve Towers of Hanoi problem.
UNIT – IV
a)
The total distance traveled by vehicle in ‘t’ seconds is given by distance =
ut+2/3at2 where ‘u’ and ‘a’ are the initial velocity (m/sec.) and acceleration
(m/sec2). Write C program to find the distance traveled at regular intervals of
time given the values of ‘u’ and ‘a’. The program should provide the flexibility to
the user to select his own time intervals and repeat the calculations for different
values of ‘u’ and ‘a’.
b)
Write a C program, which takes two integer operands and one operator form the
user, performs the operation and then prints the result. (Consider the
operators +,-,*,/,% and use Switch Statement).
UNIT – V
a)
b)
Write a C program to find both the largest and smallest number in a list of
integers.
Write a C program that uses functions to perform the following :
i)
Addition of Two Matrices
ii)
Multiplication of Two Matrices
UNIT – VI
a)
Write a C program that uses functions to perform the following operations :
i)
To insert a sub-string in to given main string from a given position.
ii)
To delete n Characters from a given position in a given string.
b)
Write a C program to count the lines, words and characters in a given text.
UNIT – VII
a)
b)
Write a C program that displays the position or index in the string S where
the String T begins, or – 1 if S does not contain T.
Write a C program to count the lines, words and characters in a given text.
UNIT – VIII
a)
b)
Write a C program to generate Pascal’s triangle.
Write a C program to construct a pyramid of numbers.
UNIT – IX
Write a C program to read in two numbers, x and n, and then compute the sum of this
geometric progression : 1 + x + x2 + x3 + ………………. + xn
For example : If n is 3 and x is 5, then the program computes 1 + 5 + 25 + 125.
Print x, n, the sum Perform error checking. For example, the formula does not make
sense for negative exponents – if n is less than 0. Have your program print an error
message if n < 0 , then go back and read in the next pair of numbers of without
computing the sum. Are any values of x also illegal ? If so, test for them too.
UNIT – X
a)
b)
2’s complement of a number is obtained by scanning it from right to left
and complementing all the bits after the first appearance of a 1. Thus 2’s
complement of 11100 is 00100. Write a C program to find the 2’s
complement of a binary number.
Write a C program to convert a Roman number to its decimal equivalent.
UNIT – XI
Write a C program that uses functions to perform the following questions :
i)
Reading a complex number
ii)
Writing a complex number
iii)
Addition of two complex numbers
iv)
Multiplication of two complex numbers
(Note : represent complex number using a structure.)
UNIT – XII
a)
Write a C program which copies one file to another.
b)
Write a C program to reverse the first n character in a file.
(Note : The file name and n are specified on the command line.)
UNIT – XIII
Write a C program that uses functions to perform the following operations on singly
linked list :
i) Creation
ii) Insertion
iii) Deletion iv) Traversal
UNIT – XIV
Write a C program that uses functions to perform the following operations on doubly
linked list.
i) Creation
ii) Insertion
iii) Deletion iv) Traversal in both ways
UNIT – XV
Write a C program that implement stack (its operations) using
i) Arrays
ii) Pointers
UNIT – XVI
Write a C program that implement Queue (its operations) using
i) Arrays
ii) Pointers
UNIT – XVII
Write a C program that uses Stack operations to perform the following :
i)
ii)
Converting infix expression into postfix expression
Evaluating the postfix expression
UNIT – XVIII
Write a C program that uses functions to perform the following :
i) Creating a Binary Tree of integers
ii) Traversing the above binary tree in preorder, inorder and postorer.
UNIT – XIX
Write C programs that use both recursive and non recursive functions to perform
the following searching operations for a Key value in a given list of integers :
i)
Linear search
ii)
Binary search
UNIT – XX
Write C programs that implement the following sorting methods to sort a given
list of integers in ascending order :
i)
Bubble sort
ii) Quick sort
UNIT – XXI
Write C program that implement the following sorting methods to sort a given list
of integers in ascending order :
i)
Insertion sort
ii)
Merge sort
UNIT – XXII
Write C programs to implement the Lagrange interpolation and Newton-Gregory forward
interpolation.
UNIT – XXIII
Write C programs to implement the linear regression and polynomial regression
algorithms.
UNIT – XXIV
Write C programs to implement Trapezoidal and Simpson methods.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
I B.Tech (EEE/ME)
R07
ENGINEERING WORKSHOP PRACTICE
SYLLABUS
1. TRADES FOR EXERCISES:
1.
2.
3.
4.
5.
6.
7.
Carpentry
Fitting
Tin-Smithy and Development of jobs carried out and soldering.
Black Smithy
House-wiring
Foundry
IT Workshop-I : Computer hard ware , identification of parts , Disassembly,
Assembly of computer to working condition, Simple diagnostic exercises.
8. IT workshop-II : Installation of Operating system windows and Linux ,
simple diagnostic exercises.
9. Welding
10. Power tools in constriction, wood working, electrical engineering and
mechanical engineering.
II TRADES FOR DEMONSTRATION & EXPOSURE:
1. Plumbing
2. Machine Shop
3. Metal Cutting (Water Plasma)
Text Books: Work shop Manual / P.Kannaiah/ K.L.Narayana/ Scitech publishers
Codes / Tables:
: Nil
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
II B.Tech. II Sem (ME)
R07
(07A40392) Mechanics Of solids And Metallurgy Lab
A) METALLURGY LAB
1. Preparation and study of the micro structure of pure metals like iron, Cu
and Al.
2. Preparation and study of the micro structure of mild steels, low carbon
steels, high – C steels
3. Study of the micro structures of cast irons.
4. Study of the micro structure Non – Ferrous alloys.
5. Study of the micro structures of Heat treated steels.
6. To find out the hardness of various treated and untreated steels.
7. Hardenability of steels by Jominy End Quench Test
B) MECHANICS OF SOLIDS LAB
1. Direct Tension test
Bending test on simply supported and cantilever beam
2. Torsion test.
3. Hardness test. A) Brinells b) Rockwell
4. Test on springs
5. Compression test on cube.
6. Impact test
7. Punch shear test
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
II B.Tech. I Sem (EEE)
R05
FLUID MECHANICS & HYDRAULIC MACHINES LAB
FLUID MECHANICS:
1. Calibration of venture meter.
2. Calibration of orifice meter.
3. Determination of coefficient of discharge for a small orifice by a constant
head method
4. Determination of coefficient of discharge for an external mouth piece by
variable head method.
5. Determination of friction factor foe a given pipe line.
6. Calibration of a contracted rectangular notch.
7. Calibration of a triangular notch.
8. Verification of Bernoullis equation.
HYDRAULIC MACHINES :
1. Determination of the efficiency ans specific speed of pelton wheel turbine.
2. Determination of coeefcient of impact jet on vanes like flat, inclined vanes,
curved vanes.
3. Performance test on centrifugal pump.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
II B.Tech. I Sem (ME)
R07
(07A30391) ELECTRICAL AND ELECTRONICS
ENGINEERING LAB
SECTION A : ELECTRICAL ENGINEERING
1.
2.
3.
4.
5.
6.
Swinburne’s test on D.C. Shunt machine.
OC and SC tests on single phase transformer.
Brake test on 3-phase induction motor.
Regulation of alternator by Synchronous impedance method.
Speed control of D.C. Shunt motor.
Brake test on D.C. Shunt motor.
SECTION B : ELECTRONICS ENGINEERING
1.
2.
3.
4.
5.
6.
Transistor CE Characteristics.
Full wave Rectifier with and without filters.
CE Amplifiers.
RC Phase Shift Oscillator.
Class A Power Amplifier.
Micro Processor
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
II B.Tech. II Sem (ME)
R05
THERMAL ENGINEERING LAB
1.
2.
3.
4.
I.C. Engines valve / port Timing Diagrams
I.C. Engines performance test (4S diesel Engines)
I.C. Engines Performance test on @s Petrol engine.
Evaluation of engine friction by Morse test on 4s multi cylinder petro;l engine
and retardation test and motoring test on 4s diesel engine .
5. I.C. Engines Heat balance test
6. I.C. Engines A/F ratio and volumetric effi9ciency
7. Performance test on VCR engines , economical speed test
8. Performance test on reciprocating air compressor unit
9. COP of refrigeration unit
10. Study of Boilers
11. disassembly/assembly of engines
12. Performance of airconditioning sstems
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
(CE 05257) FLUID MECHANICS & HYDRAULIC MACHINES LAB
III B.Tech. I Sem (ME)
1. Impact of jets on Vanes.
2. Performance Test on Pelton Wheel.
3. Performance Test on Single Stage Centrifugal Pump.
4. Performance Test on Multi Stage Centrifugal Pump.
5. Performance Test on Reciprocating Pump.
6. Calibration of Venturimeter.
7. Calibration of Orifice meter.
8. Determination of friction factor for a given pipe line.
9. Determination of loss of head due to sudden contraction in a pipeline.
10. Turbine flow meter.
RO5
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
(07A40392) PRODUCTION TECHNOLOGY LAB
II B.Tech. II Sem (ME)
I.
METAL CASTING LAB
RO7
:
1. Pattern Design and making
-
for one casting drawing.
2. Sand properties testing
-
Exercise -for strengths,
and permeability – 1
3. Moulding Melting and Casting
II.
III.
WELDING LAB
:
1. ARC Welding Lap & Butt Joint -
2 Exercises
2. Spot Welding
-
1 Exercise
3. TIG Welding
-
1 Exercise
MECHANICAL PRESS WORKING
:
1. Blanking & Piercing operation and study of simple, compound and progressive
press tool.
2. Hydraulic Press : Deep drawing and extrusion operation.
3. Bending and other operations.
IV.
PROCESSING OF PLASTICS
1. Injection Moulding.
2. Blow Moulding.
:
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
(ME 05395) METROLOGY & MACHINE TOOLS LAB
III B.Tech. II Sem (ME)
RO5
Section A
:
1. Measurement of lengths, heights, diameters by vernier calipers micrometers etc.
2. Measurement of bores by internal micrometers and dial bore indicators.
3. Use of gear teeth, vernier calipers and checking the chordal addendum and
chordal height of spur gear.
4. Machine tool “alignment of test on the lathe.
5. Machine tool alignment test on milling machine.
6. Tool makers microscope and its application.
7. Angle and taper measurements by Bevel protractor, Sine bars, etc.
8. Use of spirit level in finding the flatness of surface plate.
9. Surface roughness measurement by Taly Surf.
Section B
:
1. Introduction of general purpose machines –Lathe, Drilling machine, Milling
machine, Shaper, Planing machine, slotting machine, Cyl.j Grinder, surface
grinder and tool and cutter grinder.
2. Step turning and taper turning on lather machine.
3. Thread cutting and knurling on –lathe machine.
4. Drilling and Tapping.
5. Shaping and Planing.
6. Slotting.
7. Milling.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
(ME 05287) HEAT TRANSFER LAB
III B.Tech. II Sem (ME)
1. Composite Slab Apparatus – Overall hear transfer co-efficient.
2. Heat transfer through lagged pipe.
3. Heat Transfer a Concentric Sphere.
4. Thermal Conductivity of given metal rod.
5. Heat transfer in pin-fin.
6. Experiment on Transient Heat Conduction.
7. Heat transfer in forced convection apparatus.
8. Heat transfer in natural convection.
9. Parallel and counter flow heat exchanger.
10. Emissivity apparatus.
11. Stefan Boltzman Apparatus.
12. Heat transfer in drop and film wise condensation.
13. Critical Heat flux apparatus.
14. Study of heat pipe and its demonstration.
RO5
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
IV B.Tech. I Sem (ME)
R05
(ME 05109) CAD / CAM AND MECHATRONICS LAB
A)
CAD / CAM LAB
1. Drafting : Development of part drawing s for various components in the
form of orthographic and isometric. Representation of Dimensioning and
tolerances scanning and plotting. Study of script, DXE AND IGES FILES.
2. Part modeling : Generation of various #D models through protrusion,
revolve shell sweep. Creation of various features. Study of parent child
relation. Feature based and Boolean based modeling surface and
assembly modeling. Study of various standard translators. Design simple
components.
3. a. Determination of deflection and stresses in 2D and 3D trusses and
beams.
b. Determination deflections component and principal and von – mises
stresses in plane
stresses, plane strain and Axisymmeric components.
c. Determination of stresses in 3D and shell structures
( at least one example in each case )
d. Estimation of natural frequencies and mode shapes, harmonic response
of 2D beam.
e. Study state heat transfer analysis of plane and ax symmetric
components.
4. a. Study of various post processors used in NC machines.
b. Development of NC code for free from and sculptured surfaces using
CAM packages
c. Machining of simple components on NC milling by transferring NC code
from CAM package. Through RS 232
B)
MECHATRONICS LAB
1.
Position, Velocity and Torque Control of DC Servo Motor using
actual Programmable Motion Controller and XY position table.
2.
Point to Point Control, Linear and Circular Interpolation using actual
Programmable Motion Controller and XY Position table and its
simulation.
3.
Programmable Logic Controller programming in ladder Logic and
Functional Block Diagram (FDB), interfacing of actual PLC with
non servo motor, sensors using actual PLC and Simulation of the
same.
4.
Interfacing of sensors, electro pneumatics and DC servo motors
using actual Programmable Motion Controller and programmable
Logic Controller along with its simulation.
5.
3D Robotic Simulation / Virtual Lab for Operation of 5 Axis +
gripper, pick and place Robot, in manual mode (Teach pendant)
and thru programming (Point
to Point, Linear and Circularinterpolation).
6.
Building Circuits of Pneumatic and Electro pneumatic circuits,
Hydraulics and
Electro Hydraulics circuits for automated
systems using cross section simulation of the components.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
IV B.Tech. I Sem (ME)
R05
(ME 05490) PRODUCTION DRAWING PRACTICE&
INSTRUMENTATION LAB
UNIT – I
Conventional representation of Materials – conventional representation of parts – screw
joints, welded oints, springs, gears, electrical, hydraulicand pneumatic circuits – methods
of indicating notes on drawings.
UNIT – II
Limits and Fits : Types of fits, exercises involving selection / interpretation of fits and
estimation of limits from tables.
UNIT – III
Form and Positional Tolerances : Introduction and indication of the tolerances of from
and position on drawings, deformation of runout and total runout and their indication.
UNIT – IV
Surface roughness and its indication : Definitions – finishes obtainable from various
manufacturing processes, recommended surface roughness on mechanical components.
UNIT – V
Heat treatment and surface treatment symbols used on drawings.
UNIT – VI
Detailed / Plant drawings : Drawing of pants from assembly drawings with indications
of size, tolerances, roughness, form and position errors etc.
INSTRUMENTATION LAB
1. Study and calibration of LVDT transducer for displacement measurement.
2. Calibration of strain gauge for temperature measurement
3. Calibration of thermocouple for temperature measurement
4. Calibration of capacitive transducer for angular displacement.
5. Study and calibration of photo and magnetic speed pickups for the measurement
of speed.
6. Study and calibration of a rotometer for flow measurement.
7. Study and use of a Seismic pickup for the measurement of vibration amplitude of
an engine bed at various loads.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
IV B.Tech. I Sem (ME)
(ME 05490) PRODUCTION DRAWING PRACTICE&
INSTRUMENTATION LAB
UNIT – I
R07
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Mechanical Engineering
II B.Tech I Sem.(ME)
R07
(07A30392) OBJECT ORIENTED PROGRAMMING LAB
1. Write a Java program that prints all real solutions to the quadratic equation
ax2+bx+c=0. Read in a,b,c and use the quadratic formula. If the discriminant b2-4ac is
negative, display a message stating that there are no real solutions.
2. The Fibonacci sequence is defined by the following rule. The first two values in the
sequence are 1 and 1. Every subsequent value is the two preceeding it. Write a Java
program that uses both recursive and non recursive functions to print the nth value in the
Fibonacci sequence.
3. Write a java program that prompts the user for an integer and then prints out all prime
numbers up to that integer.
4. Write a java program to multiply two given matrices
5. Write a java program that reads a line of integer and then displays sum of all the
integers.
6. Write a java program that checks whether the given string is palindrome or not.
MADAM is a palindrome.
7. Write a java program for sorting a give list of names in ascending order.
8. Write a java program that reads on file name from the user and then displays
information about whether the file exists, whether the file is readable or writable, the type
of file and the length of the file in bytes.
9. Write a java program that reads a file and displays a file on the screen, with a line
number before each line.
10 Write a java program that displays the number of characters, lines and words in a text
file.
11. Write a java program that :
a) Implements stack ADT
b) Converts infix expression into Postfix form
12. Write an applet that displays a simple message.
13. Write an applet that receives an integer in one text field, and computes its factorial
value and returns it in another text field, when the button named “Compute” is clicked.
14. Write a java program that works as a simple calculator. Use a grid layout to arrange
buttons for the digits and for the + - * % operations. Add a text field to display the result
15. Write a java program for handling mouse events
16. Write a java program that creates three threads. First thread displays “Good
Morning” every one second, the second thread displays “Hello” every two seconds and
the third thread displays “Welcome” every three seconds.
17. Write a java program that correctly implements producer consumer problem using the
concept of inter thread communication.
18. Write a program that creates a user interface to perform integer divisions. The user
enters two numbers in the text fields, Num 1 and Num 2. The division of Num1 and
Num2 is displayed in the Result field when the Divide button is clicked. If Num1 or
Num2 were not an integer, the program would throw a Number Formal Exception. If
Num2 were Zero, the program would throw an Arithmetic Exception Display the
exception in a message dialog box.
19. Write a java program that implements a simple client / server application. The client
sends data to a server. The server receives the data, uses it to produce a result, and then
sends the result back to the client. The client displays the result on the console. For ex.
The data sent from the client is the radius of a circle, and the result produced by the
server is the area of the circle.
20. Write a java program that simulates a traffic light. The program lets the user select
one of three lights: red, yellow, or green. When a radio button is selected, the light is
turned on, and only one light can be on at a time No light is on when the program starts.
21. Write a java program allows the user to draw lines, rectangle and Ovals.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electronics & Communication Engineering
BRANCH:- IV BTECH –I SEM (ECE)
(EC 05406) MICROWAVE & OPTICAL COMMUNICATION LAB.
PART - A
1. Reflex Klystron tube characteristics
2. Gunn diode characteristics
3. Attenuation Measurement
4. Directional Coupler Characteristics
5. VSWR measurement
6. Impedance and Frequency Measurement
7. Waveguide parameters measurement
8. Scattering parameters of Circulator
9. Scattering parameters of Magic Tee.
PART – B
10. Characterization of LED.
11. Characterization of Laser Diode.
12. Intensity modulation of Laser output through an optical fiber.
13. Measurement of Data rate for Digital Optical link.
14. Measurement of NA.
15. Measurement of losses for Analog Optical link.
R05
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electronics & Communication Engineering
BRANCH:- IV BTECH –I SEM (ECE)
(EC 05177) DIGITAL SIGNAL PROCESSING LAB.
1. To study the architecture of DSP chips-TMS 320 CSX / 6X Instructions.
2. To verify linear convolution.
3. To verify the circular convolution.
4. To design FIR filter ( LP / HP ) using different windowing techniques.
5. To design IIR filter ( LP / HP )
6. N- point FEF algorithm.
7. MATLAB program to generate sum of sinusoidal signal algorithm.
8. MATLAB program to find frequency response of analog LP / HP filters.
9. To compute power density spectrum of a sequence.
10. To find the FFT of given 1-D signal and plot.
R05
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electronics & Communication Engineering
(EC 05401) MICROPROCESSORS LAB
BRANCH:- IV BTECH –I SEM (EEE)
I.
Microprocessor 8086
R05
:
1. Introduction to MASM / TASM.
2. Arithmetic operation – Multi byte Addition and Subtraction, Multiplication and
Division – Signed and unsigned Arithmetic operation, ASCII – arithmetic
operation.
3. Logic operations – Shift and rotate – Converting packed BCD to unpacked
BCD, BCD to ASCII conversion.
4. By using string operation and Instruction preflix : Move Block, Reverse string,
Sorting, Inserting, Deleting, Length of the string, String comparison.
5. DOS/BIOS programming : Reading keyboard (Buffered with and without
echo) – Display characters, Strings.
II.
Interfacing
:
1. 8259 - Interrupt Controller
:
2. 8279 - Keyboard Display
:
3. 8255 - PPI
:
4. 8251 - USART
:
Generate an interrupt using 8259
timer.
Write a small program to display a
string
of characters.
Write ALP to generate sinusoidal
wave
using PPI.
Write a program in ALP to establish
Communication between two
processors.
III.
Microcontroller 8051
1.
Reading and Writing on a parallel port.
2.
Timer in different modes.
3.
Serial communication implementation.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electronics & Communication Engineering
I B.Tech. (ECE )
R07
ELECTRONIC DEVICES AND CIRCUITS LAB.
CYCLE I
1. Identification, Specification and Testing of passive elements.
a. R, L,C components( Colour codes)
b. Potentiometers, coils , gang condensers, relays
c. Bread Board
d. Switches- SPDT, DPDT, DIP.
2. Identification specification and Testing of active elements.
a. Active devices, Diodes, BJTs, low power JFETs, MOSFETs and power transistors
b. LEDs, LCDs, Optoelectronic devices.
c. SCR, UJT, DIACs, TRIACs, Linear and Digital ICs.
3. Soldering practice- Simple circuits using active and passive elements.
4. Identification and utility of PCBs
a. Single layer
b. Multi layer
5. Study and operation of Lab equipment
a. Multimeters (Analog and Digital)
b. Function Generator
c. Regulated power supplies
6. Study and operation of CRO.
CYCLE II
1. PN Junction diode characteristics
a. Forward bias
b. Reverse bias
2. Zener diode characteristics
3. Transistor CB characteristics (Input and Output)
4. Transistor CE characteristics (Input and Output)
5. Rectifier without filters (Full wave & Half wave)
6. Rectifier with filters (Full wave & Half wave)
7. FET characteristics
8. Measurement of h parameters of transistor in CB, CE, CC configuration
9. CE Amplifier
10. CC Amplifier (Emitter Follower)
11. Single stage R-C coupled Amplifier
12. FET amplifier (Common Source)
13. Wien Bridge Oscillator
14. RC Phase Shift Oscillator
15. Feed back amplifier (Current Series)
16. Feed back amplifier (Voltage Series)
17. Hartley Oscillator
18. Colpitts Oscillator
19. SCR characteristics
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electronics & Communication Engineering
II B.Tech I Sem. (ECE)
R07
(07A30491) ELECTRONIC CIRCUITS LAB
A)
Design and Simulation in Simulation Laboratory using Multisim OR Pspice OR
Equivalent Simulation Software.
1. Common Emitter and Common Source amplifier.
2. Two Stage RC Coupled Amplifier.
3. Current shunt and Feedback Amplifier
4. Cascade Amplifier
5. Wien Bridge Oscillator using Transistors
6. RC Phase Shift Oscillator using Transistors
7. Class A Power Amplifier (Transformer less)
8. Class B Complementary Symmetry Amplifier.
9. High Frequency Common base (BJT) / Common gate (JFET) Amplifier.
B) Testing in the Hardware Laboratory
I)
II)
Any Three circuits simulated in Simulation laboratory
Any Three of the following
1. Class A Power Amplifier (with transformer load)
2. Class B Power Amplifier
3. Single Tuned Voltage Amplifier
4. Series Voltage Regulator
5. Shunt Voltage Regulator
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electronics & Communication Engineering
(EC 05345) LINER IC APPLICATIONS LAB
BRANCH:- III BTECH –I SEM (ECE)
R05
Minimum Twelve Experiments to be conducted :
1. Study of OP AMPs – IC 741, IC 555, IC 565, IC 566, IC 1496 – functioning,
parameters and Specification.
2. OP AMP Applications – Adder, Subtractor, Comparator Circuits.
3. Integrator and Differentiator Circuit using IC 741.
4. Active Filter Applications – LPF, HPF (first order).
5. IC 741 Oscillator Circuits – Phase Shift and Wien Bridge Oscillators.
6. Function Generator using OP AMPs.
7. IC 555 Timer – Monostable Operation Circuit.
8. IC 555 Timer – Astable Operation Circuit.
9. Schmitt Trigger Circuits – using IC 741 and IC 555.
10. IC 565 – PLL Applications.
11. IC 566 – VCO Applications.
12. Voltage Regulator using IC 723.
13. Three Terminal Voltage Regulators – 7805, 7809, 7912.4 bit DAC using
OP AMP.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electronics & Communication Engineering
BRANCH:- II BTECH –II SEM (ECE)
(07A40492) PULSE AND DIGITAL CIRCUITS LAB
1. Linear wave shaping
2. Non Linear wave shaping - Clippers
3. Non Linear wave shaping - Clampers
4. Transistor as a switch
5. Study of Logic Gates
6. Study of Flip-Flops
7. Sampling Gates
8. Astable Multivibrator
9. Monostable Multivibrator
10. Bistable Multivibrator
11. Schmitt Trigger
12. UJT Relaxation Oscillator
R07
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electronics & Communication Engineering
BRANCH:- II BTECH –II SEM-ECE.
(07A40491) ANALOG COMMUNICATIONS LAB
1. Amplitude Modulation and Demodulation.
2.
Diode Detector Characteristics.
3. Frequency Modulation and Demodulation
4.
Balanced Modulator.
5.
Pre-emphasis& De-emphasis.
6.
Characteristics of Mixer.
7.
Digital Phase Detector.
8.
Phase Locked Loop.
9.
Synchronous Detector.
10. SSB system.
11. Spectral Analysis of AM and FM Signals Using
12. Spectrum Analyzer.
13. Squelch Circuit.
14. Frequency Synthesizer.
15. AGC Characteristics.
RO7
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electronics & Communication Engineering
(EC 05169) DIGITAL COMMUNICATIONS LAB
BRANCH:- III BTECH –I SEM (ECE)
1. Pulse Amplitude Modulation and demodulation.
2. Pulse Width Modulation and demodulation.
3. Pulse Position Modulation and demodulation.
4. Sampling Theorem – Verification.
5. Time division multiplexing.
6. Pulse code modulation.
7. Differential pulse code modulation.
8. Delta modulation.
9. Frequency shift keying.
10. Phase shift keying.
11. Differential phase shift keying.
R05
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Electronics & Communication Engineering
(07A50492) IC APPLICATIONS AND ECAD LAB
BRANCH:- III BTECH –I SEM (ECE)
PART – A (IC APPLICATIONS LAB)
1. OP AMP Applications – Adder, Subtractor, Comparator Circuits.
2. Active Filter Applications – LPF, HPF
3. Function generator using OP AMPS.
4. IC 555 Timer – Monostable and Astable Operation circuit.
5. IC 566 – VCD Applications.
6. Voltage Regulator using IC 723.
7. 4 bit DAC using OP AMP.
PART – B (ECAD LAB)
1. D Flip – Flop 7474
2. Decade counter – 7490
3. Shift registers - 7495 7
4. 3-8 Decoder – 74138
5. 4 bit Comparator – 7485
6. 8 x 1 Multiplexer – 74151 and 2 x 4 Demultiplexer – 74155
7. RAM (16 x 4) – 74189 (Read and write operations).
R05
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Computer Science Engineering
(CS 05217) EMBEDDED SYSTEMS LAB
IV B.Tech I Sem. IT
1.
R05
Write a program to
a)
Read inputs from switches
b)
To make LEDs blink
2.
Write a Program for serial communication
3.
Write a program for encruption/decruption
4.
Develop necessary interfacing circuit to read data from a sensor and process
using the 8051 board. The data has to be displayed on a PC monitor.
5.
Sort RTOs (mCOS) on to 89CS1 board and Verify.
6.
Simulate on elevator movement using RTOs on 89CS board.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Information Technology
I B.Tech. (IT)
R07
(7A11292) COMPUTER PROGRAMMING LAB
UNIT – I
a)
b)
c)
Write a C program to find the sum of individual digits of a positive integer.
A Fibonacci Sequence is defined as follows : the first and second terms in the
sequence are 0 and 1. Subsequent terms are found by adding the preceding two
terms in the sequence. Write a C program to generate the first n terms of the
sequence.
Write a C program to generate all the prime numbers between 1 and n, where n is
a value supplied by the user.
UNIT – II
a)
b)
Write a C program to calculate the following Sum :
Sum = 1-x2/2! +x4/4!-x6/6!+x8/8!-x10/10!
Write a C program to find the roots of a quadratic equation.
UNIT – III
a)
Write C programs that use both recursive and non-recursive functions
i)
To find the factorial of a given integer.
ii)
To find the GCD (greatest common divisor) of two given integers.
iii)
To solve Towers of Hanoi problem.
UNIT – IV
a)
The total distance traveled by vehicle in ‘t’ seconds is given by distance =
ut+2/3at2 where ‘u’ and ‘a’ are the initial velocity (m/sec.) and acceleration
(m/sec2). Write C program to find the distance traveled at regular intervals of
time given the values of ‘u’ and ‘a’. The program should provide the flexibility to
the user to select his own time intervals and repeat the calculations for different
values of ‘u’ and ‘a’.
b)
Write a C program, which takes two integer operands and one operator form the
user, performs the operation and then prints the result. (Consider the
operators +,-,*,/,% and use Switch Statement).
UNIT – V
a)
b)
Write a C program to find both the largest and smallest number in a list of
integers.
Write a C program that uses functions to perform the following :
i)
Addition of Two Matrices
ii)
Multiplication of Two Matrices
UNIT – VI
a)
Write a C program that uses functions to perform the following operations :
i)
To insert a sub-string in to given main string from a given position.
ii)
To delete n Characters from a given position in a given string.
b)
Write a C program to count the lines, words and characters in a given text.
UNIT – VII
a)
b)
Write a C program that displays the position or index in the string S where
the String T begins, or – 1 if S does not contain T.
Write a C program to count the lines, words and characters in a given text.
UNIT – VIII
a)
b)
Write a C program to generate Pascal’s triangle.
Write a C program to construct a pyramid of numbers.
UNIT – IX
Write a C program to read in two numbers, x and n, and then compute the sum of this
geometric progression : 1 + x + x2 + x3 + ………………. + xn
For example : If n is 3 and x is 5, then the program computes 1 + 5 + 25 + 125.
Print x, n, the sum Perform error checking. For example, the formula does not make
sense for negative exponents – if n is less than 0. Have your program print an error
message if n < 0 , then go back and read in the next pair of numbers of without
computing the sum. Are any values of x also illegal ? If so, test for them too.
UNIT – X
a)
b)
2’s complement of a number is obtained by scanning it from right to left
and complementing all the bits after the first appearance of a 1. Thus 2’s
complement of 11100 is 00100. Write a C program to find the 2’s
complement of a binary number.
Write a C program to convert a Roman number to its decimal equivalent.
UNIT – XI
Write a C program that uses functions to perform the following questions :
i)
Reading a complex number
ii)
Writing a complex number
iii)
Addition of two complex numbers
iv)
Multiplication of two complex numbers
(Note : represent complex number using a structure.)
UNIT – XII
a)
Write a C program which copies one file to another.
b)
Write a C program to reverse the first n character in a file.
(Note : The file name and n are specified on the command line.)
UNIT – XIII
Write a C program that uses functions to perform the following operations on singly
linked list :
i) Creation
ii) Insertion
iii) Deletion iv) Traversal
UNIT – XIV
Write a C program that uses functions to perform the following operations on doubly
linked list.
i) Creation
ii) Insertion
iii) Deletion iv) Traversal in both ways
UNIT – XV
Write a C program that implement stack (its operations) using
i) Arrays
ii) Pointers
UNIT – XVI
Write a C program that implement Queue (its operations) using
i) Arrays
ii) Pointers
UNIT – XVII
Write a C program that uses Stack operations to perform the following :
i)
ii)
Converting infix expression into postfix expression
Evaluating the postfix expression
UNIT – XVIII
Write a C program that uses functions to perform the following :
i) Creating a Binary Tree of integers
ii) Traversing the above binary tree in preorder, inorder and postorer.
UNIT – XIX
Write C programs that use both recursive and non recursive functions to perform
the following searching operations for a Key value in a given list of integers :
i)
Linear search
ii)
Binary search
UNIT – XX
Write C programs that implement the following sorting methods to sort a given
list of integers in ascending order :
i)
Bubble sort
ii) Quick sort
UNIT – XXI
Write C program that implement the following sorting methods to sort a given list
of integers in ascending order :
i)
Insertion sort
ii)
Merge sort
UNIT – XXII
Write C programs to implement the Lagrange interpolation and Newton-Gregory forward
interpolation.
UNIT – XXIII
Write C programs to implement the linear regression and polynomial regression
algorithms.
UNIT – XXIV
Write C programs to implement Trapezoidal and Simpson methods.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Information Technology
I B.Tech. I Sem (IT)
R07
(07A11293) ELECTRICAL AND ELECTRONICS LAB
PART - A
1. Serial and Parallel Resonance – Timing, Resonant frequency, Bandwidthand Qfactor determination for RLC network.
2. Time response of first order RC/RL network for periodic non-sinusoidal inputs –
time constant and steady state error determination.
3. Two port network parameters – Z-Y Parameters, chain matrix and analytical
verification.
4. Verification of Superposition and Reciprocity theorems.
5. Verification of maximum power transfer theorem. Verification on DC,
verification on AC with Resistive and Reactive loads.
6. Experimental determination of Thevenin’s and Norton’s equivalent circuits and
verification by direct test.
7. Magnetization characteristics of D.C. Shunt generator. Determination of critical
field resistance.
8. Swinburne’s Test on DC shunt machine.
9. Brake test on DC shunt motor. Determination of performance Characteristics.
10. OC & SC tests on Single-phase transformer.
11. Brake Test on 3-phase induction motor.
12. Regulation of alternator by synchronous impedance method.
PART - B
1. Identification, Specifications and Testing of R, L, C Components (colour codes),
Potentiometers, Switches (SPDT, DPDT and DIP), Coils, Gang Condensers,
Relays, Bread Boards, Identification and Specifications of active devices, Diodes,
BJTs, Lowpower JFETs, MOSFETs, LEDs, LCDs, SCR, UJT, Linear and Digital
ICs.
2. PN Junction Diode Characteristics (Forward bias, Reverse bias)
3. Zener Diode Characteristics
4. Transistor CE Characteristics (Input and Output).
5. Rectifier without Filters (Full wave & half wave).
6. Rectifier with Filters (Full wave & half wave).
7. SCR Characteristics
8. FET Characteristics
9. CE and CC Amplifiers
10. Feedback Amplifier (Voltage Series / Current Series)
11. RC Phase Shift Oscillator
12. Hartely / Colpitts Oscillator
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Information Technology
I B.Tech (IT)
R07
(07A111294) ENGLISH LANGUAGE COMMUNICATION
SKILLS LAB
1. Introduction to the Sounds of English, Vowels, Diphthongs & Consonants.
2. Introduction to Stress and Intontion.
3. Situational Dialogues / Role Play.
4. Oral Presentations – Prepared and Extempore.
5. ‘Just a Minute’ Sessions (JAM).
6. Describing Objects / Situations / People.
7. Information Transfer.
8. Debate
9. Telephoning Skills.
10. Giving Directions.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Information Technology
I B.Tech. I Sem (IT)
R07
(07A11295) IT WORKSHOP
PC HARDWARE
Week 1 – Task 1 : Identify the peripherals of a computer, components in a CPU and
its functions. Draw the block diagram of the CPU along with the configuration of each
peripheral and submit to your instructor.
Week 2– Task 2 :
Every student should disassemble and assemble the PC back to
working condition. Lab instructors should verify the work and follow it up with a Viva.
Also students need to go through the video which shows the process of assembling a PC.
A video would be given as part of the course content.
Week 3 – Task 3 : Every student should individually install MS windows on the
personal computer. Lab instructor should verify the installation and follow it up with a
Vida.
Week 4 – Task 4 : Every student should install Linux on the computer. This compute
should have windows installed. The system should be configured as dual boot with both
windows and Linux, Lab instructors should verify the installation and follow it up with a
Viva.
Week 5 – Task 5 : Several mini tasks would be that covers Basic commands in Linux
and Basic system administration in Linux which includes : Basic Linux commands in
bash, Create hard and symbolic links, Text processing, Using wildcards.
Week 6 – Task 6 : Students have to be given a PC which does not boot due to
improper assembly or defective peripherals. They should identify the problem and fix it
to get the computer back to working condition. The work done should be verified by the
instructor and followed up with a Viva.
Week 7 – Task 7 : Software Troubleshooting : Students have to be given a
malfunctioning CPU due to system software problems. They should identify the problem
and fix it go get the computer back to working condition. The work done should be
verified by the instructor and followed up with a Viva.
Week 8 – Task 8 : The test consists of various systems with Hardware / Software
related troubles. Formatted disks without operating systems.
Internet & World Wide Web
Week 9 – Task 1 : Orientation & Connectivity Boot Camp : Students should get
connected to their Local Area Network and access the Internet. In the process they
configure the TCP/IP setting. Finally students should demonstrate, to the instructor, how
to access the websites and email. If there is no internet connectivity preparations need to
be made by the instructors to simulate the WWW on the LAN.
Week 10 – Task 2 : Web Browsers, Surfing the Web : Students customize their web
browsers with the LAN proxy settings, bookmarks, search toolbars and pop up blockers.
Also, plug-ins like Macromedia Flash and JRE for applets should be configured.
Week 11 – Task 3 : Search Engines & Netiquette : Students should know what
search engines are and how to use the search engines. A few topics would be given to the
students for which they need to search on Google. This should be demonstrated to the
instructors.
Week 12 – Task 4 : Cyber Hygiene : Students would be exposed to the various
threats on the internet and would be asked to configure their computer to be safe on the
internet. They need to first install an anti virus software, configure their personal firewall
and windows update on their computer. Then they need to customize their browsers to
block pop ups, block active x downloads to avoid viruses and/or worms.
Week 13 : Module Test :
A test which simulates all of the above tasks would be
crafted and given to the students.
LaTeX and Word
Week 14 – Word Orientation :
The mentor needs to give an overview of a latex and
Microsoft/equivalent (FOSS) tool word : Importance of LaTeX and MS / equivalent
(FOSS) tool Word as word Processors, Details of the four tasks and features that would
be covered in each, Using LaTeX and word – Accessing, overview of toolbars, saving
files, Using help and resources, rulers, format painter in word.
Task 1 : Using LaTeX and word to create project certificate, Features to be covered :Formatting Fonts in word, Drop Cap in word, Applying Text effects, Using Character
Spacing, Borders and Colors, Inserting Header and Footer, Using Date and Time option
in both LaTeX and Word.
Week 15 – Task 2 : Creating Project abstract Features to be covered :- Formatting
Styles, Inserting table, Bullets and Numbering, Changing Text Direction, Cell alignment,
Footnote, Hyperlink, Symbols, Spell Check, Track Changes.
Week 16 – Task 3 : Creating a Newsletter : Features to be covered :- Table of
Content, Newspaper columns, Images from files and clipart, Drawing toolbar and Word
Art, Formatting Images, Textbooks and Paragraphs.
Week 17 – Task 4 : Creating a Feedback form - Features to be covered – Forms, Text
Fields, Inserting objects, Mail Merge in Word.
Week 18 – LaTeX and Word Module Test – Replicate the given document inclusive of
all features.
Excel
Week 19 – Excel Orientation :
The mentor needs to tell the importance of
MS/equivalent (FOSS) tool Excel as a Spreadsheet tool, give the details of the four tasks
and features that would be covered in each, Using Excel –
Accessing, overview of toolbars, saving excel files, Using help and resources.
Task 1 : Creating a Scheduler - Features to be covered :- Gridlines, Format Cells,
Summation, auto fill, Formatting Text.
Week 20 – Task 2 : Calculating GPA – Features to be covered:- Cell Referencing,
Formulate in excel – average, std. deviation, Charts, Renaming and Inserting worksheets,
Hyper linking, Count function, LOOKUP/VLOOKUP.
Week 21 – Task 3 : Performance Analysis – Features to be covered :- Split cells,
freeze panes, group and outline, Sorting, Boolean and logical operators, Conditional
formatting.
Week 22 – Task 4 : Cricket Score Card - Features to be covered :- Pivot Tables,
Interactive Buttons, Importing Data, Data Protection, Data Validation.
Week 23 – Excel Module Test : Replicate the given document inclusive of all
features LaTeX and MS/equivalent (FOSS) tool Power Point.
Week 24 – Task 1 : Students will be working on basic power point utilities and tools
which help them create basic power point presentation. Topic covered during this week
includes :- PPT Orientation, Slide Layouts, Inserting Text, Word Art, Formatting Text,
Bullets and Numbering, AutoShapes, Lines and Arrows in both LaTeX and Powerpoint.
Week 25 – Task 2 : Second week helps students in making their presentations
interactive. Topic covered during this week includes : Hyperlinks, Inserting – Images,
Clip Art, Audio, Video, Objects, Tables and Charts.
Week 26 – Task 3 : Concentrating on the in and out of Microsoft power point and
presentations in LaTeX. Helps them learn best practices in designing and preparing
power point presentation. Topic covered during this week includes :- Master Layouts
(Slide, template, and notes), Types of views (basic, presentation, slide slotter, notes etc),
Inserting – Background, textures, Design Templates, Hidden slides.
Week 27 – Task 4 : Entire week concentrates on presentation part of LaTeX and power
point. Topic covered during this week includes – Using Auto content wizard, Slide
Transition, Custom Animation, Auto Rehearsing.
Week 28 – Task 5 : Power point test would be conducted. Students will be given
model power point presentation which needs to be replicated (exactly how it’s asked).
Publisher
Week 29 : Help students in preparing their personal website using
Microsoft/equivalent (FOSS) tool publisher. Topic covered during this week includes –
Publisher Orientation, Using Templates, Layouts, Inserting text objects, Editing text
objects, Inserting Tables, Working with menu objects, Inserting pages, Hyper linking,
Renaming, deleting, modifying pages, Hosting website.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Information Technology
II B.Tech I Sem.(IT)
R07
(07A31291) ADVANCED DATA STRUCTURESAND
ALGORITHMS LAB
WEEK – 1
C++ programs to implement the following using an array
a)
Stack ADT b)
Queue ADT
WEEK – 2
Write C++ programs to implement the following using a singly linked list.
a)
Stack ADT b)
Queue ADT
WEEK – 3
Write C++ programs to implement the deque (double ended queue)
ADT using a doubly linked list and an array.
WEEK – 4
Write a C++ program to perform the following operations :
a)
Insert an element into a binary search tree.
b)
Delete an element from a binary search tree.
c)
Search for a key element in a binary search tree.
WEEK – 5
Write C++ programs that use non-recursive functions to traverse the
given binary tree.
a)
Preorder
b)
inorder and c)
postorder
WEEK – 6
Write C++ programs for the implementation of bfs and dfs for a given
graph.
WEEK – 7
Write C++ programs for implementing the following sorting methods :
a)
Merge sort
b)
Heap sort
WEEK – 8
Write a C++ program to perform the following operations
a)
Insertion into a B-tree
b)
Deletion from a B-tree
WEEK – 9
Write a C++ program to perform the following operations
a)
Insertion into an AVL-tree b)
Deletion from an AVL-tree
WEEK – 10 Write a C++ program to implement Kruskal’s algorithm to generate a
minimum cost spanning tree.
WEEK – 11
Write a C++ program to implement Prism’s algorithm to generate
a minimum cost spanning tree.
WEEK – 12
Write a C++ program to implement all the functions of a dictionary
(ADT) using hashing.
(Note : Use Class Templates in the above Programs)
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Information Technology
II B.Tech (IT)
R07
(07A31292) UNIX AND SHELL PROGRAMMING LAB
WEEK 1
Session – 1
a)
b)
c)
d)
e)
Log into the system
Use vi editor to create a file called myfile.txt which contains some text.
Correct typing errors during creation.
Save the file.
Logout of the system
Session – 2
a)
b)
c)
d)
e)
f)
g)
Log into the system
Open the file created in session 1
Add some text
Change some text
Delete some text
Save the Changes
Logout of the system.\
WEEK 2
a)
b)
Log into the system
use the cat command to create a file containing the following data. Call it
mytable use tabs to separate the fields.
1425
4320
6830
1450
Ravi
Ramu
Sita
Raju
15.65
26.27
36.15
21.86
c)
d)
e)
Use the cat command to display the file, mytable.
Use the vi command to correct any errors in the file, mytable.
Use the sort command to sort the file mytable according to the first field.
Call the sorted file my table (same name):
f)
g)
Print the file mytable.
Use the cut and paste commands to swap fields 2 and 3 of mytable. Call it
my table (same name).
Print the new file, mytable
Logout of the system
h)
i)
WEEK 3
1)
a)
b)
c)
d)
Login to the system
Use the appropriate command to determine your login shell
Use the /etc/passwd file to veriy the result of step b.
Use the date and who commands in sequence (in one line) such that
the output of date will display on the screen and the output of who
will be redirected to a file called myfile2. Use the more command to
check the contents of myfile2.
2)
a)
Write a sed command that deletes the first character in each line in a
file.
Write a sed command that deletes the character before the last
character in each line in a file.
Write a sed command that swaps the first and second words in each
line in a file.
b)
c)
WEEK 4
a)
b)
c)
d)
Pipe your /etc/passwd file to awk, and print out the home directory of each
user.
Develop an interactive grep script that asks for a word and a file name and
then tells how many lines contain that word.
Repeat
Part using awk
WEEK 5
a)
Write a shell script that takes a command – line argument and reports on
whether it is directory, a file, or something else.
b)
c)
Write a shell script that accepts one or more file name as arguments and
converts all of them to uppercase, provided they exist in the current
directory.
Write a shell script that determines the period for which a specified user is
working on the system.
WEEK 6
a)
b)
Write a shell script that accepts a file name starting and ending line
numbers as arguments and displays all the lines between the given line
numbers.
Write a shell script that deletes all lines containing a specified word in one
or more files supplied as arguments to it.
WEEK 7
a)
b)
Write a shell script that computes the gross salary of a employee according
to the following rules :
i)
If basic salary is < 1500 then HRA = 10 % of the basic and
DA = 90 % of the basic.
ii)
If basic salary is > = 1500 then HRA = Rs.500 and DA = 98 % of
the basic. The basic salary is entered interactively through the key
board.
Write a shell script that accepts two integers as its arguments and
computers the value of first number raised to the power of the second
number.
WEEK 8
a)
b)
c)
Write an interactive file-handling shell program. Let it offer the user the
choice of copying, removing, renaming, or linking files. Once the user has
made a choice, have the program ask the user for the necessary information,
such as the file name, new name and so on.
Write shell script that takes a login name as command – line argument and
reports when that person logs in
Write a shell script which receives two file names as arguments. It should
check whether the two file contents are same or not. If they are same then
second file should be deleted.
WEEK 9
a)
Write a shell script that displays a list of all the files in the current directory
to which the user has read, write and execute permissions.
b)
Develop an interactive script that ask for a word and a file name and then
tells how many times that word occurred in the file.
Write a shell script to perform the following string operations
i)
To extract a sub-string from a given string.
ii)
To find the length of a given string.
c)
WEEK 10
Write a C program that takes one or more file or directory names as command line
input and reports the following information on the file :
i)
ii)
iii)
iv)
File type
Number of links
Read, write and execute permissions
Time of last access
WEEK 11
Write C programs that simulate the following unix commands :
a)
b)
mv
cp
(use system calls)
WEEK 12
Write a C program that simulates is Command
(Use system calls / directory API)
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Information Technology
II B.Tech II Sem. (IT)
R07
(07A31291) UNIX AND SHELL PROGRAMMING LAB
1. Write a Java program that prints all real solutions to the quadratic equation
ax2+bx+c=0. Read in a,b,c and use the quadratic formula. If the discriminant b2-4ac is
negative, display a message stating that there are no real solutions.
2. The Fibonacci sequence is defined by the following rule. The first two values in the
sequence are 1 and 1. Every subsequent value is the two preceeding it. Write a Java
program that uses both recursive and non recursive functions to print the nth value in the
Fibonacci sequence.
3. Write a java program that prompts the user for an integer and then prints out all prime
numbers up to that integer.
4. Write a java program to multiply two given matrices
5. Write a java program that reads a line of integer and then displays sum of all the
integers.
6. Write a java program that checks whether the given string is palindrome or not.
MADAM is a palindrome.
7. Write a java program for sorting a give list of names in ascending order.
8. Write a java program that reads on file name from the user and then displays
information about whether the file exists, whether the file is readable or writable, the type
of file and the length of the file in bytes.
9. Write a java program that reads a file and displays a file on the screen, with a line
number before each line.
10 Write a java program that displays the number of characters, lines and words in a text
file.
11. Write a java program that :
a) Implements stack ADT
b) Converts infix expression into Postfix form
12. Write an applet that displays a simple message.
13. Write an applet that receives an integer in one text field, and computes its factorial
value and returns it in another text field, when the button named “Compute” is clicked.
14. Write a java program that works as a simple calculator. Use a grid layout to arrange
buttons for the digits and for the + - * % operations. Add a text field to display the result
15. Write a java program for handling mouse events
16. Write a java program that creates three threads. First thread displays “Good
Morning” every one second, the second thread displays “Hello” every two seconds and
the third thread displays “Welcome” every three seconds.
17. Write a java program that correctly implements producer consumer problem using the
concept of inter thread communication.
18. Write a program that creates a user interface to perform integer divisions. The user
enters two numbers in the text fields, Num 1 and Num 2. The division of Num1 and
Num2 is displayed in the Result field when the Divide button is clicked. If Num1 or
Num2 were not an integer, the program would throw a Number Formal Exception. If
Num2 were Zero, the program would throw an Arithmetic Exception Display the
exception in a message dialog box.
19. Write a java program that implements a simple client / server application. The client
sends data to a server. The server receives the data, uses it to produce a result, and then
sends the result back to the client. The client displays the result on the console. For ex.
The data sent from the client is the radius of a circle, and the result produced by the
server is the area of the circle.
20. Write a java program that simulates a traffic light. The program lets the user select
one of three lights: red, yellow, or green. When a radio button is selected, the light is
turned on, and only one light can be on at a time No light is on when the program starts.
21. Write a java program allows the user to draw lines, rectangle and Ovals.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Information Technology
II B.Tech II Sem.(IT)
R07
(07A41292) DATABASE MANAGEMENT SYSTEMS LAB
1. Creation, altering and dropping of tables and inserting rows into a table (use
constraints while creating tables) examples using SELECT command.
2. Queries (along with sub Queries) using ANY, ALL, IN, EXISTS, NOTEXISTS,
UNION, INTERSET, Constraints.
3. Example : Select the roll number and name of the student who secured fourth rank
in the class.
4. Queries using Aggregate functions (COUNT, SUM, AVG, MAX and MIN),
GROUP BY, HAVING and Creation and dropping of Views.
5. Queries using Conversion functions (to_char, to_number and to_date), string
functions (Concavenation, Ipad, rpad, Itrim, rtrim, lower, upper, initcap, length,
substr and instr), date functions (Sysdate, next_day, add_months, last_day,
months_between, least, greatest, trunk, round, to_char, to_date)
a. Creation of simple PL/SQL program which includes declaration section,
executable section and exception-Handling section (Ex. Student
marks can be selected from the table and printed for those who secured
first class and an
exception can be raised if no records were found).
b. Insert data into student table and use COMMIT, ROLLBACK and
SAVEPOINT in PL/SQL block.
6. Develop a program that includes the features NESTED IF, CASE and CASE
expression. The program can be extended using the NULLIF and COALESCE
functions.
7. Program development using WHILE LOOPS, numeric FOR LOOPS, nested
loops using ERROR Handling, BUILT-IN Exceptions, USE defined Exceptions,
RAISE-APPLICATION ERROR.
8. Programs development using creation of procedures, passing parameters IN and
OUT of PROCEDURES.
9. Program development using creation of stored functions, invoke functions in SQL
Statements and write complex functions.
10. Program development using creation of package specification, package bodies,
private objects package variables and cursors and calling stored packages.
11. Develop programs using features parameters in a CURSOR, FOR UPDATE
CURSOR, WHERE CURRENT of clause and CURSOR variables.
12. Develop Programs using BEFORE and AFTER Triggers, Row and Statement
Triggers and INSTEAD OF Triggers.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Information Technology
(CS 05564) UML LAB
III B.Tech I Sem. (IT)
R05
1. The student should take up the case study of Unified Library application which is
mentioned in the theory, and Model it in different views i.e. Use case view,
logical view, component view, Deployment view, Database design, forward and
Reverse Engineering, and Generation of documentation of the project.
2. Student has to take up another case study of his/her own interest and do the same
what ever mentioned in first problem. Some of the ideas regarding case studies
are given in reference books which were mentioned in theory syllabus can be
referred for some ideas.
Note : The analysis, design, coding, documentation, database design of mini project
which will be carried out in 4th year should be done in object-oriented approach using
UML and by using appropriate software which supports UML, otherwise the mini
project will not be evaluated.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Information Technology
(CS 05580) WEB TECHNOLOGIES LAB
III B.Tech I Sem. (IT)
R05
1. Develop static pages (using Only HTML) of an online Book store. The pages
should resemble : www.amazon.com. The website should consist the following
pages.
i.
ii.
iii.
iv.
v.
vi.
vii.
Home pages
Registration and user Login
User Profile Page
Books catalog
Shopping Cart
Payment By credit card
Order Conformation
2. Validate the Registration, user login, user profile and payment by credit card
pages using JavaScript.
3. Create and save an XML document at the server, which contains 10 users
information. Write a program, which takes User Id as an input and returns the
user details by taking the user information from the XML document.
4. Bean Assignments
a. Create a JavaBean which gives the exchange value of INR (Indian
Rupees) into equivalent American/Canadian/Australian Dollar value.
b. Create a simple Bean with a label – which is the count of number of
clicks. Than create a BeanInfo class such that only the “count” property is
visible in the Property Window.
c. Create two Beans – a) KeyPad b) DisplayPad. After that integrate the
two Beans to make it work as a Calculator.
d. Create two Beans Traffic Light (Implemented as a Label with only three
background colours – Red, Green, Yellow) and Automobile (Implemented
as a TextBox which states its state/movement). The state of the
Automobile should depend on the following Light Transition Table.
Light Transition
Automobile State
Red
Yellow
Ready
Yellow
Green
Move
Green
Red
Stopped
5. Install TOMCAT web server. Convert the static web pages of assignments 2 into
dynamic web pages using servlets and cookies. Hint : Users information (user id,
password, credit cad number) would be stored in web.xml. Each user should have
a separate Shopping Cart.
6. Redo the previous task using JSP by converting the static web pages of
assignments 2 into dynamic web pages. Create a database with user information
and books information. The books catalogue should be dynamically loaded from
the database. Follow the MVC architecture while doing the website.
7. Implement the “Hello World!” program using JSP Struts Framework.
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Information Technology
(CS 05420) MULTIMEDIA AND APPLICATION DEVELOPMENT LAB
IV B.Tech I Sem. (IT)
1. Assigning Actions to an Object, and a Button.
2. Creating Loops
3. Generation Random Numbers
4. Creating a Function, Calling a Function
5. Detecting the Player Version
6. Detecting the Operating System
7. Checking the System Language
8. Detecting Display Settings
9. Tinting a Movie Clip’s color
10. Controlling a Movie Clip’s with Sliders
11. Drawing a Circle
12. Drawing a Rectangle
13. Filling a Shape with a Gradient
14. Scripting Masks
15. Converting Angle Measurements
16. Calculating the Distance Between the Two Points
17. Formatting Currency Amount
18. Converting Between Units of Measurement
19. Determining Points Along a Circle
20. Sorting or Reversing an Array
21. Implementing a Custom Sort
22. Creating a Text Field
23. Making a Password Input field
All the above programs are to be done in Flash MX 2004.
R05
B.V.C.ENGINEERING COLLEGE
ODALAREVU
Department of Science & Humanities
I B.Tech (ME)
R07
(07A10392) ENGINEERING PHYSICS AND FUELS
AND LUBRICANTS LAB
(A) ENGINEERING PHYSICS LAB
1.
Determination of Refractive Index of the material of a Prism – Spectrometer.
2.
Dispersive power of the material of a Prism – Spectrometer.
3.
Determination of wavelength of a source – Diffraction Grating.
4.
Determination of thickenss of a thin object using parallel fringes.
5.
Newton’s rings Radius of Curvature of plano-convex lens.
6.
Determination of Rigidity modulus of a material in the form of a wire –
Torsional pendulum.
7.
Melde’s Experiment – Transverse and Longitudinal modes.
8.
Time constant of R-C Circuit.
9.
L-C-R Circuit.
10.
Verification of laws of stretched string – Sonometer.
11.
Calculation of Frequency of A.C. mains – Sonometer.
12.
Magnetic, field along the axis of a current carrying coil – Stewart and Gee’s
method.