SUNSTAR微波光电 http://www.rfoe.net/ TEL:0755-83396822 FAX:0755-83376182 E-MAIL:szss20@163.com
OFF-THE-SHELF
WINTER
2003
NEW RF TO MILLIMETERWAVE IC PRODUCTS FROM HITTITE
INSIDE.....
* 15 NEW
PRODUCTS
RELEASED!
* High IP3 Amplifiers, Pg 2
* SP3T Switches and
Digital Attenuators, Pg 3
* High Isolation CATV
Switch, Pg 4
* Medium Power Amp, Pg 4
* Active Multiplier Family, Pg 5
* 2 GHz VCO, Pg 5
+36dBm HIGH DYNAMIC RANGE MIXERS!
HMC Sets New Input IP3 Benchmark for MMIC Converters
Hittite Microwave announces a new line of high dynamic range monolithic mixers that achieve
up to +36dBm input IP3 for Cellular/PCS/3G infrastructure applications. The high linearity
performance of these passive GaAs FET MMIC mixers represents the best available for any
integrated circuit of its kind in the RFIC industry.
In addition to very high dynamic range, the new UMTS
CDMA and GSM based systems are demanding mixers
that combine small size, lower cost and low external
component count in a product line that will satisfy a
wide range of RF/IF frequency plans for up or down
conversion. The HMC399MS8, HMC400MS8 and
HMC402MS8 meet those requirements by offering; the
same standard plastic SMT 8 lead Mini Small Outline
Package (MSOP) pin out, inherently lower cost IC
construction and specifications to meet low or high side
LO frequency plans respectively.
+36 dBm
INPUT IP3!
(Continued on page 6)
....COVERING
NEW PLL CALCULATOR RELEASED
* Cellular / PCS / 3G
* Broadband Wireless / Wired
Simulate Synthesizer
Phase Noise Using HMC Components
Today’s wired and wireless telecommunications systems
utilize complex modulation schemes to securely transport
vast amounts of voice and data traffic. The success of these
systems depends partly on the phase noise performance of
the Phase Lock Loop (PLL) synthesizer. Hittite has introduced
a new web-based PLL Phase Noise Calculator tool written
in Java. Synthesizer designers will find this tool useful for
selecting the best HMC Divider, Phase Frequency Detector
and VCO to simulate and achieve optimal PLL phase noise.
* WirelessLAN
* DBS
* Fixed Wireless & WLL
* Cable Modem & CATV
* Fiber Optic
* Microwave / Millimeterwave
* Pt to Pt & Pt to Multi-Pt Radios
(Continued on page 6)
* VSAT
* Sensors
* Military & Space
....NEW DOMESTIC
& INTERNATIONAL
REPS,
See Page 7
52 NEW PRODUCT INTRODUCTIONS IN 2002
In 2002 Hittite continued to build their standard product portfolio with the release of 52 new
RFIC/MMICs. Notable additions include high IP3 mixers & amplifiers, low phase noise dividers,
VCOs, active multipliers and linear control devices covering DC to 40 GHz. Over 200 products
are now offered. See the New Product section at www.hittite.com for data sheets.
HITTITE PRODUCT SHOWCASE
½ Watt Hi-IP3 Amp
High Isolation
CATV SPDT
2 GHz SMT
MMIC VCO
HMC455LP3
HMC348LP3
HMC384LP4
ORDER ON-LINE
www.hittite.com
• 1.7 - 2.5 GHz
• DC - 2.5 GHz
• 2.05 - 2.25 GHz Fo
• +42 dBm OIP3
• > 52dB Isolation
• No External Components
• 13 dB Gain
• 75 or 50 Ohm
System Operation
• +3.5 dBm Pout
• 56% PAE@
+28 dBm Pout
See Page 2
• +V Bias/Control
See Page 4
• Low Phase Noise
• +3V @ 35mA
See Page 5
MICROWAVE CORPORATION
SUNSTAR射频通信 http://www.rfoe.net/
TEL:0755-83397033
FAX:0755-83376182
E-MAIL:szss20@163.com
12 Elizabeth
Drive Chelmsford,
MA 01824 Phone:
978-250-3343 Fax: 978-250-3373
Boston, USA • London, UK • Munich, Germany • Seoul, Korea
SUNSTAR微波光电 http://www.rfoe.net/ TEL:0755-83396822 FAX:0755-83376182 E-MAIL:szss20@163.com
ULTRA LINEAR DRIVER AMPS & GAIN BLOCKS
HMC455LP3
½ Watt High IP3 Amplifier, 1.7 - 2.5 GHz
For PCS/3G Infrastructure
-35
-40
Features
+42 dBm OIP3
ACPR (dBc)
OFF-THE-SHELF
Adjacent Channel Power @ 2.14 GHz
WCDMA
Frequency : 2.14 GHz
Integration BW: 3.84 MHz
64 DPCH
-45
5V
4.5V
-50
-55
13 dB Gain
-60
56% PAE @ +28 dBm Pout
-65
Source ACPR
5
7
11
13
15
17
19
21
CHANNEL OUTPUT POWER (dBm)
Single +5V Supply
HMC461LP3
9
The HMC455LP3 is a 1.7 - 2.5 GHz
high output IP3 GaAs InGaP HBT ½
watt MMIC amplifier. Utilizing a minimum
number of external components the
amplifier provides 13 dB of gain and
+28 dBm of saturated power at 56%
PAE from a single +5 Vdc supply. The
high output IP3 of +42 dBm coupled
with the low VSWR of 1.4:1 makes the
HMC455LP3 an ideal driver amplifier
for PCS/3G infrastructure. A low cost,
leadless 3x3 mm QFN SMT houses the
linear amplifier, providing excellent RF
and thermal performance.
1 Watt High IP3 Dual-Channel Amplifier, 1.7 - 2.2 GHz
For PCS/3G Infrastructure
Adjacent Channel Power @ 2.14 GHz
-35
Features
+45 dBm OIP3
(balanced configuration)
ACPR (dBc)
-40
WCDMA
Frequency : 2.14 GHz
Integration BW: 3.84 MHz
64 DPCH
-45
-50
-55
-60
12 dB Gain
Source ACPR
4.5V
5V
5.5V
9
11
13
-65
5
7
48% PAE @ +30.5 dBm Pout
15
17
19
21
CHANNEL OUTPUT POWER (dBm)
Single +5V Supply
HMC311LP3
The HMC461LP3 is a 1.7 - 2.2 GHz high
output IP3 GaAs InGaP HBT dual-channel
MMIC amplifier. The performance of two
HMC455LP3 high IP3 drivers is offered
in this single IC, which can be configured
as a balanced or push-pull circuit. 12 dB of
gain and +30.5 dBm of saturated power at
48% PAE is provided from a single +5 Vdc
supply while utilizing external baluns in a
balanced configuration. The high +45 dBm
output IP3, coupled with the low VSWR
of 1.2:1 makes the HMC461LP3 an ideal
driver amplifier for PCS/3G infrastructure.
A low cost, leadless 3x3mm QFN SMT
houses the dual MMIC amplifier IC.
InGaP HBT Gain Block MMIC Amplifier, DC - 6 GHz
All Purpose Broadband Amp
Gain and Return Loss
20
15
Features
15 dB gain
+32 dBm OIP3
+15 dBm P1dB
50 Ohm I/Os
RESPONSE (dB)
10
5
S21
0
S11
S22
-5
-10
-15
-20
-25
0
1
2
3
4
5
6
7
8
9
FREQUENCY (GHz)
The HMC311LP3 is a GaAs InGaP HBT
Gain Block DC to 6 GHz SMT amplifier.
This 3x3mm QFN packaged amplifier
can be used as either a cascadable 50
Ohm gain stage, or to drive the LO of
HMC mixers with up to +17 dBm output
power. The amp offers 15 dB of gain and
an output IP3 of +30 dBm while requiring
only +5V @ 56 mA. The Darlington
feedback pair used results in reduced
sensitivity to normal process variations
and yields excellent gain stability over
temperature while requiring a minimal
number of external bias components.
SUNSTAR射频通信 http://www.rfoe.net/ TEL:0755-83397033 FAX:0755-83376182 E-MAIL:szss20@163.com
2
WINTER 2003
VISIT US AT WWW.HITTITE.COM
SUNSTAR微波光电 http://www.rfoe.net/ TEL:0755-83396822 FAX:0755-83376182 E-MAIL:szss20@163.com
LINEAR CONVERTERS & CONTROL DEVICES
HMC380QS16G
PCS/UMTS High IP3 Downconverter, 1.7 - 2.2 GHz
Lower Drive, Higher IP3
+19 dBm IIP3
Low LO Drive, -5 dBm
11 dB Conversion Gain
15
10
5
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
-55
CONV GAIN
NF
R/I ISOL
L/R ISOL
L/I ISOL
1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
FREQUENCY (GHz)
9 dB Noise Figure
+5V @ 120mA
HMC245QS16
OFF-THE-SHELF
Features
CG, ISOL, NF (dB)
Conv. Gain, Isolation & NF, -5dBm LO
The HMC380QS16G is a 1.7 - 2.2 GHz
high linearity down-converter receiver
IC suitable for PCS/UMTS infrastructure
applications. The receiver IC is designed
to support UMTS applications by utilizing a passive mixer coupled with a high
dynamic range IF amplifier to achieve
an input IP3 of +19 dBm. The converter
provides a gain of 11 dB and 9 dB typical
single side band noise figure. The design
requires no external baluns. IF frequencies between 50 MHz and 300 MHz are
supported.
SP3T Non-Reflective Switch, DC - 3.5 GHz
Finally,... a SP3T!
Insertion Loss and Isolation
0
0
0.5 dB Insertion loss
-0.5
IL
-20
-1
-30
-1.5
-40
45 dB Isolation
-50
+48dBm IIP3
-60
-2
RF1 ISOL
RF2 ISOL
RF3 ISOL
-2.5
-3
0
0.5
1
1.5
2
2.5
3
3.5
4
FREQUENCY (GHz)
Integrated Decoder
INSERTION LOSS (dB)
Features
ISOLATION (dB)
-10
The HMC245QS16 is a low cost non-reflective SP3T switch in a 16-lead QSOP
surface mount package. Covering DC to
3.5 GHz, the switch offers 30 to 40 dB
isolation and a low insertion loss of 0.5
dB. A 2:3 TTL/CMOS compatible decoder is integrated on the switch requiring
only 2 control lines and a single +5V bias
to select each path, replacing 6 control
lines normally required by GaAs SP3T
switches. The SP3T offers an “ALL OFF”
state with >40dB isolation and is ideal for
Cellular/PCS/3G Infrastructure.
Single +5V Supply
HMC274QS16
1dB LSB 5 Bit Digital Attenuator, 0.7 - 2.7 GHz
Accurate, Linear Control
Bit Error vs. Attenuation State
1.5
Features
+54 dBm IIP3
BIT ERROR (dB)
1
0.5
0
-0.5
0.9 GHz
1 dB LSB
31 dB Range
+/-0.5 dB Typical Bit Error
-1
1.9 GHz
2.4 GHz
-1.5
0
4
8
12
16
20
24
28
32
The HMC274QS16 is a broadband 5-bit
positive control GaAs IC digital attenuator
in a 16 lead QSOP plastic package. Covering 0.7 to 2.7 GHz the insertion loss is
typically less than 2.3 dB. The attenuator
bit values are 1 (LSB), 2, 4, 8, and 16 dB
for a total attenuation of 31 dB. Accuracy
is excellent at ± 0.5 dB typical with an
IIP3 of up to +54 dBm. Five bit control
voltage inputs, toggled between 0 and
+3 to +5 volts, are used to select each
attenuation state.
ATTENUATION STATE (dB)
Single Positive Control/Bit
SUNSTAR射频通信 http://www.rfoe.net/ TEL:0755-83397033 FAX:0755-83376182 E-MAIL:szss20@163.com
VISIT US AT WWW.HITTITE.COM
WINTER 2003
3
SUNSTAR微波光电 http://www.rfoe.net/ TEL:0755-83396822 FAX:0755-83376182 E-MAIL:szss20@163.com
CATV, CELLULAR & MICROWAVE SOLUTIONS
HMC348LP3
SPDT High Isolation CATV Switch, DC - 2.5 GHz
Isolate the Competition!
0
-10
RF1
RF2
ALL OFF
-20
Features
High Isolation
80dB @ 5 MHz
55dB @ 1 GHz
ISOLATION (dB)
OFF-THE-SHELF
Isolation, 50 Ohm System
-30
-40
-50
-60
-70
-80
+89 dBm IP2
0
0.5
1
1.5
2
2.5
FREQUENCY (GHz)
0.6 dB Insertion Loss
The HMC348LP3 is a non-reflective
GaAs MESFET SPDT switch in a low
cost leadless 3x3mm QFN SMT plastic
package ideal for CATV applications.
Covering DC to 2.5 GHz, the switch
offers high isolation, low insertion loss,
integrated 75 Ohm terminations and an
“all off” state. The switch operates using
complementary positive control voltage
logic lines of +5/0V and requires a +5V
bias supply (Vdd). This switch offers excellent performance in both 50 Ohm & 75
Ohm systems for either SPDT or SPST
functions.
“All Off” State Isolation
HMC446
10 Watt Transmit / Receive Switch, 824 - 894 MHz
Linear Power Control
Power Compression @ 849 MHz, Vdd = 5V
Features
+65 dBm IIP3
+40 dBm 0.1 dB
Compression Point
INSERTION LOSS (dB)
0
-0.5
-1
-1.5
Tx
Rx
-2
10
15
20
25
30
35
40
INPUT POWER (dBm)
0.6 dB Insertion loss
The HMC446 is a low-cost SPDT GaAs
switch in a 6-lead SOT26 package for
use in T/R applications which require very
low distortion at high signal power levels,
up to 10 watts. The device can control
signals from 824 - 894 MHz* and is especially suited for cellular booster and automotive telematic applications. The design
provides exceptional P0.1 dB of +40 dBm
and +65 dBm IIP3 on the Tx port. The
On-chip circuitry allows single positive
supply operation at very low DC current
with a single control input (Vctl).
0 / +5V to +8V Control
HMC441LP3
GaAs PHEMT Medium Power Amplifier, 6.5 - 13.5 GHz
Lower Cost, Broadband Gain!
Broadband Gain & Return Loss
20
15
Features
14 dB Gain
RESPONSE (dB)
10
5
S21
S11
S22
0
-5
-10
-15
+18 dBm P1dB
50 Ohm I/Os
3 x 3 mm QFN
Plastic Package
-20
-25
4
5
6
7
8
9
10
11
12
13
14
15
16
FREQUENCY (GHz)
The HMC441LM1 is a 7 to 15.5 GHz
broadband GaAs PHEMT MMIC Medium
Power Amplifier in an SMT leadless chip
carrier package. The amplifier provides
15 dB of gain, 21.5 dBm of saturated
power at 27% PAE from a +5.0V supply
voltage. An optional gate bias is provided
to allow adjustment of gain, RF output
power, and DC power dissipation. This
50 Ohm matched amplifier does not require any external components making
it an ideal linear gain block or driver for
HMC SMT mixers.
SUNSTAR射频通信 http://www.rfoe.net/ TEL:0755-83397033 FAX:0755-83376182 E-MAIL:szss20@163.com
4
WINTER 2003
VISIT US AT WWW.HITTITE.COM
SUNSTAR微波光电 http://www.rfoe.net/ TEL:0755-83396822 FAX:0755-83376182 E-MAIL:szss20@163.com
NEW MMICS FOR FREQUENCY GENERATION
HMC384LP4
MMIC VCO with Buffer Amplifier, 2.05 - 2.25 GHz
Stable Wireless Source!
Features
+3.5 dBm Pout
-112 dBc/Hz @ 100 kHz
Phase Noise
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
-110
-120
-130
-140
-150
3
10
+25 C
+85 C
-40 C
10
No External Resonator
4
10
5
10
6
10
7
OFFSET FREQUENCY (Hz)
+3V @ 35 mA
HMC439QS16G
OFF-THE-SHELF
SSB PHASE NOISE (dBc/Hz)
Typical SSB Phase Noise @ Vtune = +5V
The HMC384LP4 is a GaAs InGaP HBT
MMIC VCO with integrated resonator,
negative resistance device, varactor
diode, and buffer amplifier. The VCO’s
phase noise performance is excellent
over temperature, shock, vibration and
process due to the oscillator’s monolithic
structure. Power output is 3.5 dBm typical
from a 3.0V supply. The voltage controlled
oscillator is packaged in a low cost leadless QFN 4 x 4 mm SMT package and
requires no external components.
HBT Digital Phase Frequency Detector, 10 - 1300 MHz
Lower Phase Noise!
The HMC439QS16G is a digital phasefrequency detector intended for use in
low noise PLL applications for inputs
from 10 to 1300 MHz. Its combination of
high frequency of operation along with its
ultra low phase noise floor make possible
synthesizers with wide loop bandwidth and
low N resulting in fast switching and very
low phase noise. When used in conjunction
with a differential loop amplifier, the
HMC439QS16G generates an output
voltage that can be used to phase lock a
VCO to a reference oscillator.
SSB Phase Noise, Pin = 0 dBm
SSB PHASE NOISE (dBc/Hz)
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
-110
-120
-130
-140
-150
-160
-170
-180
2
10
Features
Low 100 kHz Phase Noise
-153dBc/Hz
Differential Input/
Single-Ended Output
1280 MHz
100 MHz
10
3
10
4
10
5
10
6
OFFSET FREQUENCY (Hz)
2Vpk-pk Output
+5V @ 96 mA
x2, x4, x8, x16 Active Multipliers
Simplify Microwave Radio Designs
Six New Products!
9.9 11.2
14.4 16.4
19
25 26
32
20
Features
Outputs from 9.8 to 32 GHz
0 to 11 dBm Pout
INPUT FREQUENCY (GHz)
HMC449
HMC448
10
X4
X2
HMC370LP4
X8
HMC443LP4
X16
HMC444LP4
1
HMC445LP4
Low 100 kHz Phase Noise
to -142 dBc/Hz
9
10
20
30
OUTPUT FREQUENCY (GHz)
Single +5V Supply
40
HMC introduces six Active Frequency
Multipliers covering 9.8 - 32 GHz Fout in die
and 4x4mm QFN SMT package formats.
Utilizing InGaP GaAs HBT technology
the products offer multiplication of 2, 4,
8 and 16 while yielding stable outputs
between 0 to +11 dBm from a single
+5V supply. The low additive SSB phase
noise of up to -142 dBc/Hz at 100 kHz
offset helps the user maintain excellent
system noise performance. This product
family is ideal for use in LO multiplier
chains in P2P/VSAT microwave radios
or fiber optic reference clocks up to 40
Gb/s allowing reduced parts count versus
traditional approaches.
SUNSTAR射频通信 http://www.rfoe.net/ TEL:0755-83397033 FAX:0755-83376182 E-MAIL:szss20@163.com
VISIT US AT WWW.HITTITE.COM
WINTER 2003
5
SUNSTAR微波光电 http://www.rfoe.net/ TEL:0755-83396822 FAX:0755-83376182 E-MAIL:szss20@163.com
APPLICATION SOLUTIONS!
+35dBm HIGH DYNAMIC RANGE MIXERS... (continued from page 1)
OFF-THE-SHELF
The high input IP3 performance of these new MMIC mixers coupled with their high P1dB rivals performance of traditional hybrid active
FET mixers for an equivalent +17dBm LO drive while requiring no DC bias. At 15mm2, the Hittite Mixer MSOP footprint is 1/10th the size
of a typical hybrid mixer J-lead package footprint of 152mm2.
The HMC399MS8 covers 700 to 1000 MHz RF and 60 to 250 MHz IF frequencies for GSM/CDMA based cellular transmit or receive
frequency plans. Excellent input IP3 performance of up to +35 dBm for down conversion and to +32 dBm for up conversion is provided.
With a 1 dB compression of +23 dBm, the RF port will accept a wide range of input signal levels. Conversion loss is 8.5 dB typical
and LO isolations are maintained at 23 to 35 dB.
This mixer requires only an external inductor
Parameter
HMC399MS8 HMC400MS8 HMC402MS8
Units
and capacitor to optimize the LO frequency
response.
Frequency
740 - 960
1.7 - 2.2
1.8 - 2.2
GHz
Range, RF
The HMC400MS8 covers 1.7 to 2.2 GHz RF
Frequency
540 - 900
1.4 - 2.15
1.85 - 2.53
GHz
and 50 to 300 MHz IF frequencies and satisfies
Range, LO
many UMTS/PCS transmit or receive frequency
Frequency
plans configured for low side LO. Excellent input
60 - 250
50 - 300
50 - 500
MHz
Range, IF
IP3 performance of up to +36 dBm for down
LO to RF
conversion and to +31 dBm for up conversion is
25
33
30
dB
Isolation
provided. With a 1dB compression of +21 dBm,
the RF port will accept a wide range of input
signal levels. Conversion loss is 8.8dB typical
and LO isolations are maintained at 22 to 33 dB
with no external components or bias required.
Input IP3
+35
+36
+31
dBm
Typical Performance of High IP3 Mixers
The HMC402MS8 covers 1.8 to 2.2 GHz RF and 50 to 500 MHz IF frequencies and satisfies many UMTS/PCS transmit or receive
frequency plans configured for high side LO from 1.85 to 2.53 GHz. Excellent input IP3 performance of up to +31 dBm for down
conversion and to +27 dBm for up conversion is provided. With a 1dB compression of +21 dBm, the RF port will accept a wide range
of input signal levels. Conversion loss is 8.5dB typical and LO isolations are maintained at 24 to 30 dB with no external components or
bias required.
The HMC399MS8, HMC400MS8 and HMC402MS8 MMIC mixer family is manufactured on a production GaAs MESFET process and
100% RF tested. Data sheets are available at www.hittite.com and list min/max limits for key parameters such as conversion loss,
isolations and IP3. These products are available from stock for sampling or sale.
NEW PLL CALCULATOR... (continued from page 1)
As seen in the Divider Screen shot
example below, synthesizer designers
may select an HMC product from a pull
down menu for each of the pertinent
PLL circuit elements (Divider, Phase
Frequency Detector, VCO). Hittite
recommends the user reference HMC
Select HMC Products From
Pull-down Menu
product data sheets to help determine
which part to choose based upon their
frequency, phase noise, power output &
functional requirements. Key parameters
for each of the HMC parts in the pulldown menus have been entered into
the PLL Calculator database. The user
also has the option to enter their own
key parameters by selecting "custom"
from the pull down part number lists.
Parameters for the Reference Oscillator
and Loop Filter are entered by the user.
Once all of the PLL circuit elements have
been defined the user clicks "next" to
see both the Reference Oscillator and
VCO phase noise. Final adjustments
can be made to the respective phase
noise performance of each of these
elements. Pressing the final "Calculate"
button yields the PLL Synthesizer Phase
Noise Result screen shot shown at the
right. The phase noise of each of the
PLL elements is depicted along with the
PLL synthesizer phase noise. The tool
clearly shows which element contributes
to the PLL noise floor versus the offset
frequency.
PLL Phase Noise “Results”
Screen
The tool was designed to be easily
maintained and updated as new HMC
parts are introduced.
There is an
excellent "HELP ?" section that explains
detailed information on the PLL calculator
use and functions. Try it today!
SUNSTAR射频通信 http://www.rfoe.net/ TEL:0755-83397033 FAX:0755-83376182 E-MAIL:szss20@163.com
6
WINTER 2003
VISIT US AT WWW.HITTITE.COM
SUNSTAR微波光电 http://www.rfoe.net/ TEL:0755-83396822 FAX:0755-83376182 E-MAIL:szss20@163.com
NEWS FROM
HITTITE!
HITTITE EXPANDS
REPRESENTATIVE NETWORK!
FOR MORE INFORMATION...
Hittite Microwave is pleased to welcome several new
representative firms to our sales network. Our growing
representative network provides our customers worldwide with
outstanding customer service, sales and technical support.
Hittite’s network of reps in Asia has grown significantly in the
past few months. Serving customers in mainland China and
Hong Kong, Planet Technology (Hong Kong) Ltd., specializes
in the sale and distribution of RF/microwave components.
The company boasts strong ties with the design centers of
local telecommunications companies. MEDs Technologies
Ptd. Ltd., provides sales and service to HMC customers in
Singapore, Malaysia, Indonesia and the Philippines. MEDs
Technologies was founded in 1996 and is headquartered in
Singapore. Bandtek International Co., Ltd., headquartered
in Taipei, will service customers in Taiwan. Bandtek carries
a complete line of RF/microwave components and has close
ties to the defense and wireless markets in Taiwan. Syratron
Marketing Private Ltd., located in Bangalore, India, joins the
HMC team with an extensive background in RF/microwave
sales and distribution. The group has strong ties with local
defense, space and communications companies.
In Europe, Hittite has added Special-Ind S.p.A to its team.
With offices in Milan and Rome, Special-Ind services HMC
customers throughout Italy. Founded in 1955, the company
offers a broad range of electronic components and materials
to customers in the telecommunications, automotive and
industrial hi-tech markets.
Contact information for all our representatives is located in the
box at right, as well as on our website.
ORDER HITTITE PRODUCTS ON-LINE!
E-Commerce available now! Hittite customers
can enjoy the convenience of on-line ordering
at www.hittite.com. A selection of products can
be purchased on-line via a secure shopping cart interface,
including:
• Standard products, including all plastic parts
• Low order quantities
• Evaluation PC boards
• Volume Tape & reel packaging on
selected products
Payment is made using either MasterCard or VISA. Orders
generally ship next business day after confirmation.
NEW 2003 DESIGNER’S GUIDE
COMING SOON!
The 2003 edition of Hittite’s popular Designer’s Guide
will be available in late February. Log onto our website at
www.hittite.com to request your copy. CD-ROM versions will
also be available.
Hittite Microwave Europe Limited
Intec 4.1 Wade Road
Basingstoke, Hampshire RG24 8NE
Phone: +44(0) 1256-817000
Fax: +44(0) 1256-817111
europe@hittite.com
www.hittite.com
Hittite Microwave Deutschland GmbH
Isarstrasse 1
D83026 Rosenheim, Germany
Phone: +49 8031-97654
Fax: +49 8031-98883
germany@hittite.com
www.hittite.com
Hittite Microwave Asia Co., Limited
POSCO Center Bldg. West Tower
11th Floor 892 Daechi-dong,
Kangnam-gu, Seoul, Korea 135-777
Phone: (82-2) 559-0638
Fax: (82-2) 559-0639
asia@hittite.com
www.hittite.com
NORTH AMERICA REPRESENTATIVES
CANADA
Contact HMC Sales Direct 978-250-3343
USA North East;
MA, RI, ME, NH, VT, CT
dBm Technical Sales 978-256-7100
No. NJ & Metro NY/LI, So. CT
TSR Marketing 914-347-4948
So. NJ, E. PA:
Micro Lambda 609-259-0400
USA Mid-Atlantic;
So. NJ, DE
Contact HMC Sales Direct 978-250-3343
MD, VA, WV, DC
Vincent Pirro Electronics 410-489-9554
USA Mid-West;
IN, OH, MI, MN, WI, KY, W. PA
DyTec, Inc. 317-578-0474
ND, SD
Contact HMC Sales Direct 978-250-3343
No. IL
TK Technologies Inc. 847-991-7160
MO, IA, KS, NB, So. IL
Dynamic Technology, Inc. 913-780-4444
USA South East;
FL, GA, NC, SC, AL, TN
Spartech South 321-727-8045
CO, UT,
W. Howard Associates, Inc. 303-766-5755
HI, MT, WY
Contact HMC Sales Direct 978-250-3343
EUROPE, MID-EAST,
& AFRICA REPRESENTATIVES
Benelux;
Datron BV +31-35-6246649
Czech Republic;
Transtech Electronics Spol s.r.o.
+420 (2) 6122-1039
Finland;
Orbis OY +358-9-478-830
France;
Tech-Inter +33 -1- 30-51-6699
Germany, Austria, & Switzerland;
Hittite Microwave Deutschland GmbH
+49 8031-97654
OFF-THE-SHELF
In the US, Micro Lambda LLC, with offices in Clarksburg, NJ
and Pasadena, MD, joins Hittite to cover southern New Jersey
and western Pennsylvania. The company was established in
1977 and focuses primarily on the sale and distribution of radio
frequency, microwave and hybrid microelectronic products.
Hittite Microwave Corporation
USA Corporate Headquarters
12 Elizabeth Drive
Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
hmcsales@hittite.com
www.hittite.com
Israel;
Starlight Technologies, Inc. +972-39410555
Italy;
Special-Ind SPA +39-02-6074741
Sweden, Norway, & Denmark;
Amtele AB +46-8-556-466-00
South Africa;
RF Design Laboratory CC +27-21-7625365
United Kingdom & Ireland;
Link Microtek Ltd +44-1256-355771
ASIA & SOUTH PACIFIC
REPRESENTATIVES
China;
Planet Technology Ltd. +852-2521-4567
Wai Tat Electronics Ltd. +852-2799-7393
India
Syratron +91-80-5591107/5591031
Indonesia, Malaysia, Philippines, Singapore
MEDs Technologies, Pte., Ltd.
+65 6453-8313
Japan;
Seki Technotron Corp. +81-03-3820-1716
Korea;
ENS Engineering +82-2-562-9819
Taiwan R.O.C.;
Bandtek International Co., Ltd.
+886-3-5972050
AMERICAS DISTRIBUTION:
Future Electronics
800-Future-1
Ext. 2754, Americas
www.FutureElectronics.com/rf
USA South West;
TX, OK, LA, AR
N & W Sales, Inc. 817-461-4443
AZ, NM, So. NV
Contact HMC Sales Direct 978-250-3343
USA West;
No. CA, No. NV
Custom & Wireless Sales 408-371-0222
OR, WA, ID
CTC Sales Corporation 425-793-4317
So. CA
Rhino Engineering, Inc. 310-798-1069
SUNSTAR射频通信 http://www.rfoe.net/ TEL:0755-83397033 FAX:0755-83376182 E-MAIL:szss20@163.com
VISIT US AT WWW.HITTITE.COM
WINTER 2003
7
WINTER
2003
SUNSTAR微波光电 http://www.rfoe.net/ TEL:0755-83396822 FAX:0755-83376182 E-MAIL:szss20@163.com
What We Do
Hittite Microwave Corporation designs and manufacturers high volume integrated circuit
(IC) products to support the expanding needs of high-speed voice and data transfer systems. Hittite’s product line of RF to millimeter wave components is recognized across the
world because it offers a unique variety of functions and solutions for systems that operate
between DC and 40 GHz.
All of Hittite’s high performance ICs are manufactured using cutting edge semiconductor
processes, including GaAs InGaP HBT, SiGe, PHEMT, and MESFET technology. When
designing a product, we select the most appropriate semiconductor and package technology, and then uniquely balance digital and RF integration techniques to produce a result
that is easy and cost effective for our customers to use.
Our reputation of leading the industry with MMIC VCOs, mixers, switches, and surface
mount millimeter wave components has opened up new opportunities for our customers. Regardless of frequency, we apply high volume manufacturing techniques across
our product groups. Each year Hittite breaks through new technology barriers, and then
applies the technology to produce millions of integrated circuits to satisfy our customers.
Our customers can then address existing and create new markets for their products.
Products from our standard catalog are shipped to factories that are located across Asia,
Australia, North America, South America, and Europe. Our customers manufacture many
different types of systems for the wireless and wired telecommunications world including:
• Cellular, PCS, and 3G Platforms
• Broadband Wireless Systems for WLAN and LAST MILE INTERNET Radio Platforms
• Microwave/Millimeterwave Radio Links
• Cable Modem Systems for CATV
• DBS Consumer Electronic Systems
• Fiber Optic Systems from OC-48 to OC-192
• Two-way Pager Systems
• Military and Space
© 2002, Hittite Microwave Corporation, All Rights Reserved.
MICROWAVE CORPORATION
SUNSTAR射频通信 http://www.rfoe.net/ TEL:0755-83397033 FAX:0755-83376182 E-MAIL:szss20@163.com
12 Elizabeth Drive Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Boston, USA • London, UK • Munich, Germany • Seoul, Korea
SUNSTAR微波光电 http://www.rfoe.net/ TEL:0755-83396822 FAX:0755-83376182 E-MAIL:szss20@163.com
SUNSTAR 商斯达实业集团是集研发、生产、工程、销售、代理经销 、技术咨询、信息服务等为
一体的高科技企业，是专业高科技电子产品生产厂家，是具有 10 多年历史的专业电子元器件供
应商，是中国最早和最大的仓储式连锁规模经营大型综合电子零部件代理分销商之一,是一家专
业代理和分銷世界各大品牌 IC 芯片和電子元器件的连锁经营綜合性国际公司，专业经营进口、
国产名厂名牌电子元件，型号、种类齐全。在香港、北京、深圳、上海、西安、成都等全国主要
电子市场设有直属分公司和产品展示展销窗口门市部专卖店及代理分销商，已在全国范围内建成
强大统一的供货和代理分销网络。 我们专业代理经销、开发生产电子元器件、集成电路、传感
器、微波光电元器件、工控机/DOC/DOM 电子盘、专用电路、单片机开发、MCU/DSP/ARM/FPGA 软
件硬件、二极管、三极管、模块等，是您可靠的一站式现货配套供应商、方案提供商、部件功能
模块开发配套商。商斯达实业公司拥有庞大的资料库，有数位毕业于著名高校——有中国电子工
业摇篮之称的西安电子科技大学（西军电）并长期从事国防尖端科技研究的高级工程师为您精挑
细选、量身订做各种高科技电子元器件，并解决各种技术问题。
微波光电部专业代理经销高频、微波、光纤、光电元器件、组件、部件、模块、整机；电
磁兼容元器件、材料、设备；微波 CAD、EDA 软件、开发测试仿真工具；微波、光纤仪器仪表。
欢迎国外高科技微波、光纤厂商将优秀产品介绍到中国、共同开拓市场。长期大量现货专业批发
高频、微波、卫星、光纤、电视、CATV 器件: 晶振、VCO、连接器、PIN 开关、变容二极管、开
关二极管、低噪晶体管、功率电阻及电容、放大器、功率管、MMIC、混频器、耦合器、功分器、
振荡器、合成器、衰减器、滤波器、隔离器、环行器、移相器、调制解调器；光电子元器件和组
件：红外发射管、红外接收管、光电开关、光敏管、发光二极管和发光二极管组件、半导体激光
二极管和激光器组件、光电探测器和光接收组件、光发射接收模块、光纤激光器和光放大器、光
调制器、光开关、DWDM 用光发射和接收器件、用户接入系统光光收发器件与模块、光纤连接器、
光纤跳线/尾纤、光衰减器、光纤适 配器、光隔离器、光耦合器、光环行器、光复用器/转换器；
无线收发芯片和模组、蓝牙芯片和模组。
更多产品请看本公司产品专用销售网站:
商斯达微波光电产品网:HTTP://www.rfoe.net/
商斯达中国传感器科技信息网：http://www.sensor-ic.com/
商斯达工控安防网：http://www.pc-ps.net/
商斯达电子元器件网：http://www.sunstare.com/
商斯达消费电子产品网://www.icasic.com/
商斯达实业科技产品网://www.sunstars.cn/
射频微波光电元器件销售热线：
地址：深圳市福田区福华路福庆街鸿图大厦 1602 室
电话：0755-83396822 83397033 83398585 82884100
传真：0755-83376182 （0）13823648918
邮编：518033
E-mail:szss20@163.com
MSN: SUNS8888@hotmail.com
QQ: 195847376
深圳赛格展销部：深圳华强北路赛格电子市场 2583 号 电话：0755-83665529
25059422
技术支持: 0755-83394033 13501568376
欢迎索取免费详细资料、设计指南和光盘 ；产品凡多，未能尽录，欢迎来电查询。
北京分公司：北京海淀区知春路 132 号中发电子大厦 3097 号
TEL：010-81159046 82615020 13501189838 FAX：010-62543996
上海分公司：上海市北京东路 668 号上海賽格电子市场 D125 号
TEL：021-28311762 56703037 13701955389 FAX：021-56703037
西安分公司：西安高新开发区 20 所(中国电子科技集团导航技术研究所)
西安劳动南路 88 号电子商城二楼 D23 号
TEL：029-81022619 13072977981 FAX:029-88789382
SUNSTAR射频通信 http://www.rfoe.net/ TEL:0755-83397033 FAX:0755-83376182 E-MAIL:szss20@163.com