TASC 2000 Series - Allied Healthcare Products, Inc.

advertisement
Product Specification
Total Articulating Service Column - TASC 2000 Series
Elements
•
•
•
•
•
The TASC Pendant is available in single and double
arm configurations
Each joint has a rotation range up to 330°
Pendant head can be custom-designed to
accommodate a large variety of medical gas outlets
and electrical devices
Pnuematic brake is available to lock the pendant
once it is placed into position
Equipment carrier is available to combine
workplaces and save space in the room
Description
The TASC 2000 Series Pendants are designed to
conveniently dispense medical gas and electrical services
in the operating room suite or intensive care
environment. The TASC Pendant is available in a single
or double arm configuration and with or without vertical
movement. The pendant arm has rotation at the ceiling,
at the elbow of the upper and lower arm, and at the
pendant head.
The medical gas and electrical systems are complete for
single point connection to each gas service and electrical
circuit at the mounting platform.
The mounting platform shall be designed to support the
arm and the optional equipment carrier. The platform
shall include 6" long pigtails, with gas specific DISS
connections for mistake-free installation. The support
platform will also include an electrical junction box.
The arm length of the TASC 2401 is 39.4" (1000 mm)
from the center point of the ceiling tube to the pendant
head. The arm length of the TASC 2402 is 39.4"(1000
mm) for the upper arm and 39.4" (1000 mm) for the
lower arm.
The arm length of the TASC 2831 is 35.4" (900 mm)
from the center point of the ceiling tube to the pendant
head. The arm length of the TASC 2832 is 39.4" (1000
mm) for the upper arm and 35.4" (900 mm) for the lower
arm.
Each pivoting point of the arm has permanentlylubricated rotating bearing and adjustable stops for
controlling the degree of rotation. Each pivoting point
has the capability of up to 330° lateral rotation.
The electrical motor system shall control the up and
down vertical deflection of the pendant head through
23.6" (600 mm) of travel. The power requirements for
the motor shall be 115 volt/1 phase/60 hertz.
The pendant head shall be designed for a maximum of 10
medical gas outlets (quick connect or DISS), and any
combination of 10 electrical outlets, grounding jacks, or
monitoring receptacles. The pendant head will remain in
its working position at all points along the 330º arc of
travel and in any vertical position, even with an electrical
supply failure.
All medical gas outlets (quick connect and DISS) are
color-coded and labeled for quick identification.
An equipment carrier can be attached to the pendant
head to position shelves for monitors and other surgical
or critical care equipment. The shelves can be equipped
with drawers, brackets, and rail systems. The carrier
improves space management by locating equipment from
the floor to the pendant.
Total Articulating Service Column - TASC 2000 Series
Product Data
Technical Data
Ceiling Mounting
Suspended ceiling depth up to 1200 mm
Mounting on concrete ceiling with heavy-duty anchor
Maximum moment on structural ceiling - 3000 Nm
Support System
Approximate weight
TASC 2401 77 lbs (35 kg)
TASC 2402 110 lbs (50 kg)
TASC 2831 110 lbs (50 kg)
TASC 2832 154 lbs (70 kg)
Ceiling heights
TASC 2401 100.80" to 134.25"
TASC 2402 106.30" to 139.80"
TASC 2831 104.30" to 157.50"
TASC 2832 110.00" to 141.70"
Length of support arm
TASC 2401 1000 mm (39.37")
TASC 2402 1000 mm (39.37")/1000 mm (39.37")
TASC 2831 900 mm (35.43")
TASC 2832 1000 mm (39.37")/900 mm (35.43")
Maximum loads
TASC 2401 100 kg
TASC 2402 40 kg
TASC 2831 70 kg
TASC 2832 70 kg
Height Adjustments
AC electric motor - single phase - 110/60hz
Lifting range - 600 mm (23.62")
Rotation range - gradually adjustable up to 330°
Pendant Head Supply
Terminals
Medical gas outlets Maximum 10 gas and/or vacuum
Electrical outlets Maximum 10 electrical power sockets
Product Specification
Total Articulating Service Column - TASC 2000 Series
TASC 2401/2402
TASC 2401
Quantity ____________
TASC 2402
Quantity ____________
Total Articulating Service Column - TASC 2000 Series
TASC 2831/2832
TASC 2831
Quantity ____________
TASC 2832
Quantity ____________
Total Articulating Service Column - TASC 2000 Series
CEILING MOUNTING PLATFORM
Figure 1: Ceiling Support Structure Example
Installing the TASC Ceiling Mounting Platform
1. The ceiling mounting platform is equipped with the necessary medical gas pigtails to allow the contractor
to connect to the piping system.
2. The mounting platform is available for delivery prior to the shipment of the complete Pendant. Once the
mounting platform is installed the ceiling can be completed.
3. The Pendant is mounted directly to the mounting platform.
Product Specification
Total Articulating Service Column - TASC 2000 Series
ORDERING INFORMARION
Chemetron Ceiling Pendents are manufactured to customer specifications. The following steps must be
completed prior to the manufacture of the ceiling column.
Step 1
Notes
Indicate the style of pendent .
General information to remember when selecting the devices in a ceiling column:
• To ensure proper position of medical gas and electrical
outlets, position the Gas and Electrical ID in the desired location.
• The gas and electrical outlets must be separated into
the left and right side of the pendant head.
• If 10 medical gas outlets are selected, a maximum of 4
vacuum and evacuation outlets can be installed.
• Normal and emergency electrical receptacles cannot be
located in the same row of outlets. These devices cannot be installed into the same electrical back box.
• Specify color for electrical duplex outlets (Normal,
Emergency)
• Monitor receptacles should be wired under monitor
manufacturer’s recommendations for proper shielding.
• Adjacent electrical receptacles will be provided in double or triple configurations with common back box and
cover. Adjacent ground receptacles or other adjacent
electrical receptacles of the same type will be furnished
with common back box and cover plate for installation
convenience.
• Location E8 on the selection table is not available on
Models 2831 and 2832. This location contains the vertical movement switch.
Style
Quantity
TASC 2401
TASC 2402
TASC 2831
TASC 2832
Step 2
Indicate the ceiling height of the room in which the ceiling
column will be located. The ceiling column is designed for
heights of 8’6” to 10’0”. Ceiling heights less than 8’6” will
require sub-mounting.
Ceiling Height
Step 3
Select standard for medical gas outlets
U.S. Style
ISO Style
Step 4
Select the style of medical gas outlet installed in the ceiling column. If nitrogen is used in the column indicate the style of outlet to be installed
Chemetron® Quick-Connect
Oxequip® Quick-Connect
Nitrogen
Dyna-Con
Connect2 Medaes Compatible
DISS
DISS
Puritan Bennett Quick-Connect
Schrader
Step 5
The drawing on the next page shows the views of the pendant head. On the selection grid indicate the location of the medical
gas and electrical devices required on the pendant. If a location does not require a device a blank plate will be installed. As
shown on the grid, medical gas and electrical outlets cannot be located in the same plate, they must be separated .
Product Specification
Total Articulating Service Column - TASC 2000 Series
Ordering information and Outlet COnfiguration
G
10
G
9
E
10
E
9
Back View
G
7
G
1
G
2
G
3
E
1
E
2
E
3
E
7
G
8
G
4
G
5
G
6
E
4
E
5
E
6
E
8
Side View
Front View
Side View
Medical Gas/Electrical Services and Types
Medical Gas Service
QC
DISS
G
1
G
2
G
3
G
4
G
5
G
6
G
7
G
8
G
9
G
10
E
1
E
2
E
3
E
4
E
5
E
6
E
7
E
8
E
9
E
10
Oxygen Outlet
Vacuum Outlet
Air Outlet
N2O Outlet
Not Available
Nitrogen Outlet
Evacuation Outlet
Carbon Dioxide Outlet
CO2/O2 < 7%
Electrical Service
115V
220V
20 Amp Receptacle – Red
20 Amp Receptacle – Ivory
Twist Lock 20 Amp
Ground Receptacle
Not Available
Double Ground Receptacle
Remote Monitor Provision
EEG-EKG 5-Pin
37-Pin Monitor Receptacle
Product Specification
Total Articulating Service Column - TASC 2000 Series
Accessories
Accessory
Quantity
Weight
Catalog #
490 mm Wide
24.1 lbs.
81-25-0001
690 mm Wide
28.5 lbs.
81-25-0002
490 mm Wide
42.4 lbs.
81-25-0003
690 mm Wide
51.8 lbs.
81-25-0004
700 mm Long
4.2 lbs.
81-25-0010
900 mm Long
7.5 lbs.
81-15-0011
Universal Equipment Carrier
Equipment Carrier
Respiratory Monitoring
Equipment Rods
Product Specification
Total Articulating Service Column - TASC 2000 Series
Accessories
Accessory
Quantity
Weight
Catalog #
600 mm Wide
9.7 lbs.
81-25-0020
800 mm Wide
13.9 lbs.
81-25-0021
Deposit Console
5.1 lbs.
81-25-0022
Console for Swiveling Rail
0.9 lbs.
81-25-0023
1 Drawer
25.2 lbs.
81-25-0030
2 Drawers
33.3 lbs.
81-25-0031
600 mm Wide
2.7 lbs.
81-25-0040
800 mm Wide
3.6 lbs.
81-25-0041
Equipment Consoles
Shelves
(1-drawer model shown)
Parallel Rails
Product Specification
Total Articulating Service Column - TASC 2000 Series
Accessories
Accessory
Quantity
Weight
Catalog #
Double Swiveling Rail
1.4 lbs.
81-25-0050
Compact Rail
2.0 lbs.
81-25-0051
Support Rail
0.9 lbs.
81-25-0052
Inside
(shown as smaller rail)
4.2 lbs.
81-25-0053
Outside
(shown as larger rail)
4.9 lbs.
81-25-0054
Surrounding Rail, Small
4.2 lbs.
81-25-0055
Surrounding Rails
Product Specification
Total Articulating Service Column - TASC 2000 Series
Accessories
Accessory
Quantity
Weight
Catalog #
200 mm Deep
(shown on right)
1.0 lbs.
81-25-0070
300 mm Deep
(shown on left)
1.0 lbs.
81-25-0071
600 mm Deep
(shown in middle)
1.0 lbs.
81-25-0072
Hinged Arm
2.2 lbs.
81-25-0074
Infusion Support
(IV Bottle holder – 6 hooks)
4.4 lbs.
81-25-0074
CVP Pole
3.6 lbs.
81-25-0075
Cable Holder Set
(shown on left)
1.0 lbs.
81-25-0076
Rail Clips (10/set)
(shown on right)
1.0 lbs.
81-25-0077
Wire Baskets
Product Specification
Total Articulating Service Column - TASC 2000 Series
Accessories
Accessory
Quantity
Weight
Catalog #
Twin Bracket Clamp
0.5 lbs.
81-25-0078
Pneumatic Brake
1.1 lbs.
81-25-0100
81-25-0101
Suction Bottle Slide Adapter
Shelf with Writing Surface
17.0 lbs.
81-25-0120
Product Specification
Total Articulating Service Column - TASC 2000 Series
Accessories
Accessory
Weight
Catalog #
6.6 lbs.
81-25-0121
with 2 Drawers
8.8 lbs.
81-25-0122
with 3 Drawers
11.1 lbs.
81-25-0123
Cable Remote Control
0.7 lbs.
81-25-0200
Swivel Cabinet with 1 Drawer
Quantity
Swivel Cabinet
(with 2 Drawers shown)
All specifications are nominal and subject to
change without notice.
Warranty
See Allied Statement of Warranties for details
© 2001 Allied Healthcare Product, Inc. Printed U.S.A.
Customer Service:
USA: (800) 444-3940
FAX: (800) 477-7701
Canada/ Mexico: (800) 446-0552
FAX: (800) 246-6201
International: (314) 268-1683
FAX: (314) 771-5183
1720 Sublette Avenue
St. Louis, MO 63110 USA
(314)771-2400
www.alliedhpi.com
ISO 9001 CERTIFIED
Product Specification
Form No. 81-00-2000 May 2001
Download