U9310070
CS-11 LCD 7-Day 5+2 Programmable Digital Timeswitch
Buttons and LCD display
Buttons
Press > 5 seconds
Short press
Turning the timeswitch on and off
Menu button( when timeswitch is turned off)
M
WED
Program button ( when timeswitch is turned on)
Set the time and day of the week
AUTO
Cancel override function
Confirm settings
Program 1
Increase the set value
Selection of override option 1
Decrease the set value
Selection of override option 2
+
Lock /unlock buttons
Reset to factory settings
(when timer is turned off)
M +
Program 1,2,
3,4,5,6
The program number
The buttons are locked
Turning Your Timeswitch ON/OFF
Press buttton
to turn the timeswitch ON or OFF. When the timeswtich is turned off, the LCD will display OFF only.
Configuration Menu
This timeswitch is full of useful features which can be set quite easily through the feature configuration menu shown below. To access the feature configuration menu, simply
turn off your timeswitch and hold button M for 5 seconds. Now you can see Menu 1, which can be adjusted as required. To proceed to the other menus, press button M again.
To exit the feature configuration menu, press button
Menu #
Factory Default
Feature Value
Feature Description
1
Set backlight turning-on time. Selecting on will turn the light on continuously.
Selecting off will turn the light off. Selecting 20 seconds will turn the light on for 20 seconds.
2
Select 12 / 24 hour clock
3
Program type selection. This gives user 3 options of program type.
5_2 will give you 5 days(Monday to Fiday) with the same six events(Wakeup, out, home,
out, home,sleep) and 2 days(Saturday and Sunday) with the same six events.
20 seconds
Press
or
to select
20 seconds / ON /OFF
24
12 / 24
7_0
5_2 / 6_1 / 7_0
6_1 will give you 6 days(Monday to Saturday) with the same six events(Wakeup, out, home,
out,home,sleep) and 1 day(Sunday) with the same six events.
7_0 will give you individual settings for each day from Monday to Sunday.
This product should be installed by a qualified electrician.
See overleaf for further setting up information
Registered Address: 6 Tannery Yard, Witney Street, Burford, Oxon., OX18 4DW
Tel: 01993 824900 : www.emmeti.co.uk : e: sales@emmeti.co.uk
U9310070
CS-11 LCD 7-Day 5+2 Programmable Digital Timeswtich
Temporary override
Program your timeswitch
1
2
3
Press and hold button M for 5 seconds until “Program” is shown with the Day flashing. Use up or
down button adjust the day (hold up or down button for 5 seconds to set all days the same).
Press button M to bring up the program 1. Use up or down button to set the start time
(default 06:30).(Hold up or down button to change by 15 minutes each time.)
Press button M again and use up or down button to choose on or off
for program 1.(default ON )
4Repeat 2
3
and
unitl you finish the settings for 6 programmes. Press button M to accept and exit.
Below are the default factory settings for the 6 programmes.
Programme
Start time
Setpoint
1
06:30
ON
2
08:30
OFF
3
11:30
OFF
4
13:00
OFF
5
16:30
ON
6
22:30
OFF
To temporarily override the current programme times, select one of the following two options:
Option 1: An ‘override’ (‘advance’) function which changes an OFF period to ON until
the next OFF time and changes an ON period to OFF until the next ON time.
Option 2 : A +1 hr. override. This allows the user to set the timeswitch to ON when it is
in a programmed OFF period for one hour only. It also allows the user to add
1 hour to the existing ON period when it is in a programmed ON period.
To select option 1:
1. Press the up or down button once, the “ON/OFF” display will start flashing
2. Press the up button to select Option 1
3. Press
to confirm the setting. ‘Temporary’ and ‘1’ will be shown on the LCD
To cancel option 1 press and hold
for 5 seconds until ‘Temporary’ disappears.
To select option 2:
1. Press the up or down button once, the “ON/OFF” display will start flashing
2. Press the down button to select Option 2
3. Press
to confirm the setting. ‘Temporary’ and ‘2’ will be shown on the LCD
To cancel option 2 press and hold
for 5 seconds until ‘Temporary’ disappears.
Please note that options 1 and 2 cannot be used together.
Holiday function
Note: It is faster to program the same schedule for the entire week and then to adjust the exceptional days.
Set the Time and Day
The holiday function allows the user to turn the timeswitch off from 1 to 99 days and
then return automatically to the users time programme afterwards.
To enter holiday mode press and hold the up button until
appears in the display.Use
the same procedure to exit the holiday mode.Then press the up button to set the required
number of days for the holiday :the display shows the number of days being set and is adjustable
from 1 to 99 days. The down button can be used to reduce the number of days if required.
Resetting factory defaults
Your timeswitch has the ability to reset all settings to the factory defaults. If you are
certain you want to do this: In standby mode(when timeswtich is turned off), press
and hold button M and
for 5 seconds until “RES” is shown for 5 seconds on LCD.
This timeswitch is fitted with a real time clock. It is essential that the clock time and day are set accurately if
you require your programmed events to start on time. Follow the easy steps below,
once and the time will flash
Step 1. Press the button
Step 2. Use up or down button to change the time (Hold up or down button to change by 15 minutes each time.)
Lock the buttons
again, the day of the week will flash
Step 3. Press button
To
lock
the buttons, press and hold the up and down buttons for 5 seconds until you
Step 4. Use up or down button to change the day of the week
see a lock icon appearing, to unlock, repeat the steps above.
again to accept and exit
Step 5. Press button
Installation and Wiring
WARNING
1. Please ensure that the electrical wiring of the installation and connections to and from the timeswitch and any remote sensor connected to it are in accordance with BS 7671, the latest edition of the IET
Wiring Regulations.
2. The timeswitch must be wired to the electric mains through a switch capable of disconnecting all poles compliant with the current safety standards and with a contact separation of at least 3 mm in all poles.
3. Before commencing work on the installation, the electricity supply must be disconnected.
4. The depth of the back box should be 35mm minimum.
3
2
1
Carefully unplug the ribbon connector
which is plugged in to the front half of
the thermostat
Place the thermostat front half somewhere
safe. Terminate the thermostat as shown
in the diagrams below
4
Carefully separate the front half of the thermostat
from the back plate by placing a small flat head
terminal driver into the slots on the bottom face of
the thermostat
5
1
ErP Class
+1%
Single Zone
Screw the thermostat back
plate on to the back box
8
Re-connect the thermostat ribbon cable
and clip the two halves together
ErP Class
+5%
Multi
Zone
Dimensions
Wiring Diagram
Link terminals 1
to 3 for 230VAC
live output

NC switched
live output
NO switched
live output
N
L
230V ~ 50Hz
Registered Address: 6 Tannery Yard, Witney Street, Burford, Oxon., OX18 4DW
Tel: 01993 824900 : www.emmeti.co.uk : e: sales@emmeti.co.uk