CATALOG #
JOB NAME
TYPE
WATTAGE
VOLTAGE
Lighting Since 1895
5” LED
2400 LUMEN SERIES
LRR-05438
42 WATT
Super Shallow Open Appearance Downlight
Up to 60,000 Hour Life • Wet Location • LED
LM-80 Qualified • LM-79 Certified Photometry
Specifications
Delivered System Performance*
• Standard MFL distribution: 2491 delivered
lumens / 54 LPW / 0.7 SC.
• 42 watt LED array. 3500°K standard
(or see Options -27K, -30K or -41K).
• Up to 85 CRI and 60,000 hour life (L70). For
90+ CRI, see Option -HC.
• Fully sustainable: removable for servicing.
Thermal Management System
• All aluminum proprietary heat sink,
components and housing maximize cool
operation and long life while minimizing
maintenance.
LED Power Supply
• Suitable for outdoor / indoor use:
-30°C (-22°F) to 60°C (140°F).
• 120-277V / 50-60Hz standard. Load
insensitive.
• 0-10V CCR dimming standard. (100-10%)
• For Lutron HiLume dimming, see -29 or -39.
Thermal Protection: SPECIFY VOLTAGE
• Thermal protector for insulation detection per
UL/NEC. Must specify input voltage.
Trim Assembly
• Seamless tapered aluminum self-flanged trim
with white finish.
• Regressed tempered prismatic spread lens.
Acrylic Enameled Aluminum Housing:
Super Shallow Depth
• Rustproof and corrosion resistant: Exceeds
1000 hour ASTM 5% salt spray test.
• Shallow depth fits restricted plenums.
• Cool operation: Extends life of all components.
• Fully sustainable: Entire luminaire, including
LED light engine, easily visible and serviced
through aperture.
• Built-in plaster flange.
Outlet Box
• UL listed J-box with insulated removable
cover. Prewired 14 GA (NEC) with ½” and ¾”
knockouts.
Installation
• Recess indoor or outdoor.
• Accommodates ceilings up to 1-1/8” thick.
• 27” galvanized hanger bars with adjustable
mounting brackets (2) supplied.
UL, C-UL (Canada) Listings
• Wet, damp or dry locations, covered
ceilings.
• Through-branch conductors (4 #12 AWG
90°C).
CE & FCC Compliance
• Meets IEC/EN 60601-1-2 electromagnetic
compatibility standard for medical electrical
equipment.
• FCC Part 15 certified for EMI/RFI emissions.
FIVE YEAR
Limited Warranty
• Complete standard fixture.
Performance at a Glance
Exceptional
Energy
Efficiency
EEE
STANDARD (MFL)
DISTRIBUTION
Lumens:2491
Beam:~37°
SC:0.7
LPW:54
Efficiency:81.5%
ITL Test: 80052
90˚
75˚
1500
60˚
3000
4500
0˚
45˚
15˚
30˚
Ceiling Cut-out
6½” Dia.
AGE
Y VOLT
F
SPECI
3401 EAST JEFFERSON AVENUE • DETROIT, MICHIGAN 48207-4232
(313) 259-6400 • Fax: (313) 259-9409 OR (313) 259-3121 • www.kirlinlighting.com
LED LIGHTING
REV OCT2009
2015
MARCH
*See note next page
LATITUDES LED LIGHTING
DUE TO OUR CONTINUING EFFORT TO IMPROVE PRODUCTS, TECHNICAL INFORMATION IS SUBJECT TO CHANGE WITHOUT NOTICE. THE KIRLIN
COMPANY EXPECTS PHOTOMETRIC PERFORMANCE TO IMPROVE SIGNIFICANTLY AND FREQUENTLY AS LED SOURCE TECHNOLOGY IMPROVES.
CATALOG NUMBER
LRR-05438
LRR-05438
5” LED
2400 LUMEN SERIES
42 WATT
Since 1895
Photometry from I.T.L., Boulder, CO
Photometric testing done in
accordance with IESNA LM-79-08
STANDARD (MFL)
Lumens:2491
Beam:~37°
SC:0.7
LPW:54
Efficiency:81.5%
ITL Test: 80052
90˚
75˚
EEE
1500
Cone of Light▲
Dist.
6
8
10
12
14
16
FC
123.9
69.7
44.6
31.0
22.8
17.4
Dia.
4.0
5.3
6.6
7.9
9.2
10.6
60˚
3000
4500
0˚
45˚
15˚
30˚
LM-80 Qualified • LM-79 Certified Photometry
manufacturers maintain a tolerance of +7% on flux (lumens) and power (electrical) measurements. Kirlin * LED
photometrics are actual test data from Independent Testing Laboratories (ITL) where photometry was measured from 3055 lumen (42W) light engines (within the established tolerance).
Options
0
5
15
25
35
45
55
65
75
85
90
0.0
4461
4130
3089
1499
522
173
68
26
8
3
0
22.5
4461
4130
3089
1499
522
173
68
26
8
3
0
45.0
4461
4130
3089
1499
522
173
68
26
8
3
0
▲Cone of Light Key
(Dia. (in ft.) shown is where FC value is half the FC at nadir.)
67.5
4461
4130
3089
1499
522
173
68
26
8
3
0
90.0
4461
4130
3089
1499
522
173
68
26
8
3
0
Ft. Distance from fixture
FC Footcandles at nadir (0°)
Dia. Circle of light at 50% of FC
OLTAGE
SPECIFY V
LED Power Supply
-120 120V (50-60Hz) input for thermal protector.
-277 277V (50-60Hz) input for thermal protector.
-29 Two wire full range (100-1%) PWM dimming
instead (Lutron). 120V only. Requires 4-3/8”
deep housing. Not available with Option -EI.
-39 Three wire full range (100-1%) PWM dimming
instead (Lutron). Requires 4-3/8” deep housing.
-97 Specify other voltage. Consult factory.
-EI Remote emergency inverter for 85% of rated
lumens. Run time: 90+ minutes. 120 or 277V,
60Hz input only. Specify voltage. Not for use
with Option -29.
Color Temperature (CCT)
-27K Color temperature 2700°K instead.
-30K Color temperature 3000°K instead.
-41K Color temperature 4100°K instead.
-HC 90+ CRI instead. 2700° or 3000°K only.
Reduces output by ~15%.
Trims
-21 White transluscent flat poly diffuser instead.
-23 Frosted microprismatic lens instead.
-31 White acrylic enameled trim flange. Available
only with Option -35T.
-32 White oversize trim ring. Specify O.D.
SUBMITTAL DATA
JOB NAME
WATTAGE
-35T Natural aluminum acrylic enameled trim. Also
see Option -31.
-45 Gasket between trim flange and ceiling.
-62 Clear specular self-flanged trim.
-94 Custom color/finish. Specify. Consult factory.
-DF Electrically isolated “dead front” gasketed trim.
Also requires Option -45.
Other
-79 Extension collar for ceilings up to 2” thick.
-99 Special modification. Consult factory.
-FS In-line fusing.
APPROVAL STAMP
ARRA
TYPE
CATALOG NUMBER
CANDLEPOWER DISTRIBUTION
Total System Watts 46.0
QUALIFIED
VOLTAGE
LED
LED LIGHTING
MARCH
REV
OCT 2009
2015
LIMITED WARRANTY: CATALOGED KIRLIN FIXTURES ARE WARRANTIED FREE OF DEFECTS IN WORKMANSHIP OR MATERIAL FOR THREE YEARS FROM DATE OF PURCHASE, INSTALLED TO N.E.C., IN NORMAL USE. Manufacturer at his option will replace or repair such fixture or refund the purchase price on presentation
of proof of purchase and defective fixture at the offices of manufacturer within three years of original shipment. Liability of manufacturer is limited to the foregoing, and manufacturer shall not be liable for any other damages, direct or indirect, sustained or suffered by purchaser or any person. This warranty is supplied to the buyer in place of all other warranties, expressed or implied. Seller
does not warrant as to merchantability or fitness for a particular use, nor will any oral statement constitute a warranty or amend this specific warranty. Abnormal use, abuse of the fixture, improper installation, or repair, or modification of the fixture without prior written authorization from the manufacturer will render the warranty void.
Detailed Photometry - Installed Fixture