Online Product Guide

advertisement
SBRT Open Mask Compression Prostate
Bolus Supine Breast PATIENT Spine
LT-Thermoplastic fSRS COMFORT IGRT
MR Safe Head & Neck IS ACCURACY
Prone Breast Positioning Aids Belly Board
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
1
V-1603-6
LT-THERMOPLASTIC
Contents
CDR Systems Treatment Solutions
SRS & SBRT
14
Founded in 2002, CDR has become a global leader in designing and manufacturing world-class & exceptionally
innovative patient positioning systems and associated consumables to radiation oncology centers of all sizes.
Breast & Thorax
Contact us by email: info@cdrsys.ca
Order from us: orders@cdrsys.ca
Our Website: www.cdrsys.ca
CDR Systems Inc. | #33, 235105 Wrangler Drive
| Calgary, Alberta | T1X 0K3
Whether you are a freestanding cancer center or a hospital-based healthcare provider, CDR is able to deliver leadingedge solutions and services for treatments including prone and supine breast, prostate, SBRT, abdominal compression,
frameless Cranial SRS, IGRT Head & Neck as well as all associated peripherals such as thermoplastic masks, Vacuum
Lock cushions & pumps, waterbaths and ovens, bolus and a range of positioning wedges and supports.
CDR is focused on accuracy, reproducibility and patient comfort. No other products offer a more complete system that
enhance both quality of treatment with exceptional clinical backing, or product support and knowledge to our customers.
Afterall, Patient Comfort is Accuracy!
Please refer to the Distributors section of our website or contact us to confirm your CDR representative
CDR products are CE marked as Class 1 Medical Devices for use in radiotherapy and radiation oncology in accordance
with the Medical Device Directive 93/42/EEC.
CDR Systems Inc is an FDA registered company and has received FDA 510(k) clearance for most CDR patient positioning
devices
2
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
SaBella Flex™ Dual Axis Precision Positioning System for Breast & Lung
SaBella Prone™ Advanced Prone Breast Patient Positioning
Koilia Mikros Belly Board
16
18
20
22
23
24
26
28
30
32
36
39
MR Safe Options
Freedom™ MR Safe
40
Aids & Accessories
42
SaBella Prone™ MR Safe
Koilia Mikros Belly Board MR Safe
SaBella Flex™ MR Safe
Index Bars MR Safe
Table Pads
Vacuum LockTM Cushions, Pumps & Accessories
Digital Water Bath
Digital Dry Heat Thermoplastic Warming Drawer
Gel & Solid Bolus
Head Supports
Accessories
Wedges, Supports and Positioning aids
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
SRS & SRBT
About CDR Systems
FreedomTM Total Body Precision Patient Immobilization System
FreedomTM Overlay System
FreedomTM Intuition ClickTM SRS and Head & Neck System
FreedomTM Prone Head & Neck System
Aeris ArrayTM for ExacTrac
FreedomTM Couch Extensions
FreedomTM SBRT & Spine Systems
FreedomTM Pneumatic Abdominal Compression Belt
INDEX BARS
12
BREAST & THORAX
Contact us by fax: 403.271.0201
Indexing Bars (all couch types)
40
41
41
41
41
44
46
49
49
50
51
52
53
MR SAFE
Contact us by phone: +1.855.856.7035 Local +403.850.7035
5
3
ACCESSORIES
LT-ThermoplasticTM Immobilization & Sheets
LT-Thermoplastic
4
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
5
LT-THERMOPLASTIC
Split Frame Drape Type Immobilization Masks
IMMOBILIZATION MASKS & SHEETS
All CDR LT-Thermoplastics
are made with the most
advanced polymerization
processes, ensuring
that we hold true to
our mantra - Patient
Positioning is Accuracy.
All LT-Thermoplastic
products are dry heat
compatible (see page 49)
Drape Immobilization (SL32-S) shown on the Freedom System (LB-SBRT)
LT-Thermoplastic Drape Type - 2.4mm Standard
5 ea.
SL32-S
LT-Thermoplastic Drape Type - 3.2mm Standard
5 ea.
SL32-SL
LT-Thermoplastic Drape Type - 3.2mm Long
5 ea.
SL24-SXL
LT-Thermoplastic Drape Type - 2.4mm Extra Long
5 ea.
SL32-SXL
LT-Thermoplastic Drape Type - 3.2mm Extra Long
5 ea.
Hybrid Open Face Drape Type Immobilization Masks
SL24-S-HYB-O
HYBRID OPEN FACE MASK
Engineered for ultimate patient comfort. This mask never covers
the patient's face, making it especially ideal for claustrophobic
patients. The CDR Hybrid Open Immobilization Mask is proven and
the mask of choice for Optical Surface Imaging systems.
www.cdrsys.ca
·
info@cdrsys.ca
·
LT-Thermoplastic Hybrid open face/Drape Type
5 ea.
Standard Immobilization Masks
Optical Surface Engineering
image shown with open Hybrid
Mask
(SL24-S-HYB-O)
Hybrid Immobilization (SL24-S-HYB-O) and Shoulder Tech LT-Thermoplastic - shown with
Freedom System (LB-SBRT)
6
SL24-S
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
SL24
LT-Thermoplastic Standard Type - 2.4mm
5 ea.
SL32
LT-Thermoplastic Standard Type - 3.2mm
5 ea.
SL48
LT-Thermoplastic Standard Type - 4.8mm
5 ea.
SL24-L
LT-Thermoplastic Standard Type - 2.4mm Long
5 ea.
SL32-L
LT-Thermoplastic Standard Type - 3.2mm Long
5 ea.
SL24-XL
LT-Thermoplastic Standard Type - 2.4mm Extra Long
5 ea.
SL32-XL
LT-Thermoplastic Standard Type - 3.2mm Extra Long
5 ea.
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
7
Shoulder Tech
The Shoulder-TechTM Drape is designed to be used in conjunction with the
FreedomTM System SRS and Head & Neck Module. Working in collaboration with
the IntuitionTM System and an LT-Thermoplastic Split Frame Drape type mask, the
Shoulder-TechTM Drape is easy to apply and provides shoulder immobilization while
remaining extremely comfortable.
ST32-01
Prone Mask set ensures correct support for prone patients. See page 23 for
additional information on the Prone Immobilization System.
PH08-MSET
BL TYPE IMMOBILIZATION
5 ea.
BL408 - B Type
LT-Thermoplastic Prone Head & Neck Mask set
(includes SL32 and SL48)
1 ea.
BL Type Immobilization Masks
BL Type LT-Thermoplastic immobilization masks are compatible with BrainLabTM
type immobilization head-only and head, neck and shoulder immobilization
platforms. Similar techniques and water bath temperature are implemented when
working with this immobilization mask system.
BL406
LT-Thermoplastic BL-Type - A-Type
5 ea.
BL408
LT-Thermoplastic BL-Type - B-Type
5 ea.
BL410
LT-Thermoplastic BL-Type - Head, Neck & Shoulder Type
5 ea.
BL410 - H,N&S Type
Waterbath Liners & Transfer Sheets
WATERBATH LINERS & TRANSFER SHEETS
A non-stick mesh is used to line waterbaths to minimize the risk of thermoplastics
adhering to the pan and also as a simple way to trasfer heated thermoplastics from
the bath to the patient.
99-01-S
LT-Thermoplastic™ Small Water bath liners (non-stick)
10 in x 15 in / 254 mm x 381 mm
10 ea.
99-01-M
LT-Thermoplastic™ Medium Water bath liners (non-stick)
18 in x 24 in / 457 mm x 609 mm
10 ea.
99-01-L
LT-Thermoplastic™ Large Water bath liners (non-stick)
24 in x 36 in / 609 mm x 914 mm
10 ea.
Mask Shims
MASK SHIMS
0.5mm Mask Shim for perfecting the mask fit. Supplied in packs of three and six, CDR
Mask Shims can be stacked to achieve customized correction.
MSHIM
Face Mask Shims Thickness: 0.5mm
6 ea.
MSHIM-I
Intuition ClickTM Shims Thickness: 0.5mm
3 ea.
Silverman Head Support Shims Thickness: 0.5mm
3 ea.
HSHIM
8
LT-Thermoplastic Shoulder Tech - 3.2mm
Freedom™ Prone Head and Neck Mask Set
FREEDOM PRONE HEAD & NECK MASK SET
BL406 - A Type
LT-THERMOPLASTIC
SHOULDER-TECHTM DRAPES FOR SHOULDER IMMOBILIZATION
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
9
All LT-Thermoplastic sheets are manufactured using the most current and advanced processes
available, ensuring the highest consistency with respect to stretch, working time and ultimate patient
comfort. The sheets come in various sizes and thicknesses, ranging from 1.6mm to 4.8mm, and are
available in both Solid and Perforated types to ensure maximum accuracy and comfort.
1.6mm Thick
RS16-18x24
LT-Thermoplastic™ Sheet - Perforated 18” x 24” (1.6mm)
1 ea.
LT-Thermoplastic™ Sheet - Solid 18” x 24” (1.6mm)
1 ea.
LT-Thermoplastic™ Sheet - Perforated 18” x 24” (2.0mm)
1 ea.
LT-Thermoplastic™ Sheet - Type D Solid (2.0mm)
1 ea.
LT-Thermoplastic™ Sheet - Solid 18” x 24” (2.0mm)
1 ea.
RS32-12x18
LT-Thermoplastic™ Sheet - Perforated 12” x 18” (3.2mm)
1 ea.
RS32-18x24
LT-Thermoplastic™ Sheet - Perforated 18” x 24” (3.2mm)
1 ea.
RS32-24x36
LT-Thermoplastic™ Sheet - Perforated 24” x 36” (3.2mm)
1 ea.
RS32-18x24-01
LT-Thermoplastic™ Sheet - Solid 18” x 24” (3.2mm)
1 ea.
RS32-24x36-01
LT-Thermoplastic™ Sheet - Solid 24” x 36” (3.2mm)
1 ea.
RS48-17x17-01
LT-Thermoplastic™ Sheet - Solid 17” x 17” (4.8mm)
1 ea.
RS48-12x24-01
LT-Thermoplastic™ Sheet - Solid 12” x 24” (4.8mm)
1 ea.
SaBella Flex™ 12” PLV Handles for LT-Thermoplastic Sheets
2 ea.
PLV-12HNDL
LT-Thermoplastic™ Pelvis Immobilisation Handles 12"
(305mm)
2 ea.
PLV-18HNDL
LT-Thermoplastic™ Pelvis Immobilisation Handles 18"
(457mm)
2 ea.
PLV-24HNDL
LT-Thermoplastic™ Pelvis Immobilisation Handles 24"
(609mm)
2 ea.
RS16-18x24-01
2.4mm Thick
RS20-18x24
J-DL-D20
All LT-Thermoplastic products are dry heat compatible.
RS20-18x24-01
3.2mm Thick
4.8mm Thick
Handles
Solid
Perforated
SBS14-PLV
for LT-Thermoplastic
Perforated and Solid
Sheets
LT-Thermoplastic sheets. See page 49 for water
baths and dry heat oven / warming drawers.
LT-Thermoplastic Technical Specifications
ACTIVATION
TEMPERATURE
HEATING TIME
Forming an LT-ThermoplasticTM perforated 12"x24"
chest mold in use with the SaBella FlexTM. See page
32 for more information.
Between 70°C and 75°C
(160°F to 165°F)
DIGITAL DRY HEAT THERMOPLASTIC
WARMING DRAWER
DIGITAL WATER BATH
Water Bath:
1-2 minutes (max 5 minutes)
Dry Heat Oven:
3-10 minutes (max 30 minutes)
DRYING TIME
Maximum of 10 seconds
MOLDING TIME
1 to 2 minutes
HARDENING TIME
Minimum of 10 minutes
DHCO-01
Digital Warming Drawer
DHCO-EU
Digital Warming
Drawer (220V/50hz)
WB-LRG-2
Digital Water bath
WB-LRG-2-EU
Digital Water bath
(220V/50hz)
For more on WaterBaths, see page 49.
10
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
11
LT-THERMOPLASTIC
LT-Thermoplastic Perforated and Solid Sheets
LT-THERMOPLASTIC PERFORATED & SOLID SHEETS
Varian Exact
Index System
Precise
Index System
(Elekta, & BL)
Prodigy
Index System
Prodigy 2
Index System
IB06-CF
IB06-CF-EVO
IB06-MT-1CF
IB06-MT-2CF
IB06-CF-01
IB06-CF-EVO-01
IB06-MT-1CF-01
IB06-MT-2CF-01
IB06-CFA
IB06-EVO-CFA
IB06-MT-1CFA
IB06-MT-2CFA
IB06-O
IB06-EVO-0
IB06-MT-1O
IB06-MT2-O
INDEX BARS
INDEXING BARS
INDEXING BARS
CARBON FIBER
Standard
Material: Carbon Fiber
SRBT Wide
ALUMINIUM
Material: Carbon Fiber
Lateral Offset
Carbon Fiber:
Standard
(2, 4 & 6 cm)
MR SAFE
Standard
Configuration
MT
Material: Alluminium
For MR Safe versions of any CDR Index Bars, please see our MR Safe section on page 40.
Standard
SBRT Wide
Lateral Offset: 2, 4 or 6cm left or right
MR Safe (available in all types)
CDR manufactures and supplies indexing bars to suit all
types of simulation and treatment couches. With many
options to suit most requirements, all indexing bars are
manufactured to exact industry standards to ensure your
positioning device and patient are indexed and aligned
every time.
Carbon fiber indexing bar types are radio translucent and
contain no metal parts.
12
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
13
PATIENT
COMFORT
IS ACCURACY
SRS & SBRT
14
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
15
TOTAL BODY PRECISION PATIENT IMMOBILIZATION
SYSTEM, FOR SRS, SBRT AND MORE
The Freedom System provides a
precision platform enabling setup of:
Freedom System Arms Up Configuration, shown with Vacuum Lock cushion and
indexed abdominal compression module
Cranial Frameless SRS Patients
Supine Breast Patients
SBRT abdominal compression patient
ARM S D OWN C ON F I G URAT I ON
SRS & SRBT
A single modular-based precision patient positioning
platform that is directly indexed to any treatment couch.
With seven indexable modules that accurately position
your patient in the two primary supine configurations,
Arms Up or Arms Down. All patient setup configurations
on the FreedomTM system are optimized for Arc
treatments, and all imaging modalities including Cone
Beam imaging.
Vacuum cushion indexed automatically by
the specifically engineered contours of the
Freedom system
IGRT H&N patient
And More
Carbon fiber indexing bar set
(match to couch top)
Engineered for extremely low density, with a weight of only 1.7kg
(3.8lbs)
Compatible with any indexable treatment couches
Filler Modules | Integrated table pads, removable
for Indexable Vacuum Lock Cushion
Indexable Handles
The Freedom System provides comfortable total body positioning and immobilization and is specifically
engineered to be compatible with all Optical Surface Imaging (OSI) systems.
Indexable Module for Leg & Knee Positioning
Indexable Module for Foot Positioning
ARM S U P CONF IGURAT I ON
Carbon fiber indexing bar set
(match to treatment or CT couch))
Indexable Module for Arms Up/Back position
Indexable Compression Bridge
Hybrid Open LT-Thermoplastic Mask and
Shoulder Tech with Intuition Mold on
Freedom System
Filler Modules | Integrated table pads,
removable for Indexable Vacuum Lock Cushion
Indexable Module for Leg & Knee Positioning
Indexable Module for Foot Positioning
Freedom System Arms Down Configuration, shown with Intuition Mold, Shoulder Tech and
Full LT-Thermoplastic Mask
For MR Safe versions of any Freedom™ System components, please see our MR Safe section on page 36.
16
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
17
FREEDOMTM CT & Treatment Overlays
COMPREHENSIVE FREEDOMTM CT & TREATMENT COUCH OVERLAY
BASIC FREEDOMTM CT & TREATMENT COUCH OVERLAY
(CRANIAL SRS, HEAD & NECK, SBRT, SPINE AND MORE)
The Freedom™ Basic CT & Treatment Overlay for Cranial SRS and Head & Neck has been
specifically designed to remain lightweight for ease of moving between rooms. It can be
integrated with LT-Thermoplastic U-Type masks (see page 7) as well as the Freedom Intuition
ClickTM Module (see page 20 & 21) to give you exceptionally high levels of positioning accuracy
without forgoing patient comfort.
The Freedom™ Comprehensive CT & Treatment Overlay has been engineered for
extremely low density, with a weight of only 1.7kg (3.8lbs). Compatible with all treatment
couches including Varian, Elekta, Siemens, Tomotherapy and many more, the Freedom™
Comprehensive Overlay allows you to have one true precision patient positioning solution.
This will save you time, money and space while ensuring your patients treatment is optimized
and comfortable.
Integrated table pads
significantly increase patient
comfort for SRS treatment
and can be removed to allow
additional indexing of Vacuum
Lock™ cushions for SBRT
SRS & SRBT
Slots allow for attachment of
Freedom Intuition modules
(for SRS and Head & Neck) and
Freedom Shoulder Retractors
(pictured)
Four point locking system
for Freedom™ SBRT
components/modules
(see page 27 & 28)
Interchangeable
Indexing bars allow
indexing to any couch
Four Point locking
system for attachment
of Freedom™ Wishbone
Mask Stabilizer (pictured)
or Aeris Array (for
ExacTrac® - see page 22)
Unique 5-Point tension lock
mechanism ensures masks
are securely anchored to
the overlay with fast, easy
removal.
FDM-S-BAS
FreedomTM System Basic Overlay Package
Includes: LB02, 2x IB06 type Indexing Bars (specify couch)
1 ea.
FDM-S-STD
LB02-WM
Freedom Basic Overlay Wall Mount
1 ea.
LB02
FreedomTM Basic CT/Treatment Overlay - includes CFJ02
CFJ02
Freedom
RS02
FreedomTM System Comprehensive Overlay Package
Includes: 1x LB-SBRT, 1x STA-FILL, 2x IB06 type Indexing Bars
1 ea.
LB-SBRT-WM
Freedom Comprehensive Overlay Wall Mount
1 ea.
1 ea.
LB-SBRT-01
FreedomTM Comprehensive CT/Treatment Overlay - includes CFJ02
1 ea.
5-Point Tension Lock Immobilization Clamp
1 ea.
CFJ02
Freedom
5-Point Tension lock Immobilization Clamp
1 ea.
Freedom
Shoulder Retractors for Freedom Overlays
2 ea.
RS02
Freedom
Shoulder Retractors for Freedom Overlays
2 ea.
NWB02
Freedom
Wishbone Mask Stabilizer
1 ea.
NWB02
Freedom
Wishbone Mask Stabilizer
1 ea.
IB06-CF
Standard Carbon Fiber Index Bar - Exact Index System
1 ea.
IB06-CF
Standard Carbon Fiber Index Bar - Exact Index System
1 ea.
SBRT Wide Carbon Fiber Index Bar - Exact Index System
1 ea.
TM
TM
TM
We can provide Index Bars to suit any couch. Go to page 25 to see all available Index Bars
For MR Safe versions of any Freedom™ System components, please see our MR Safe section on page 36.
18
Four Point locking system
for attachment of Freedom™
Wishbone Mask Stabilizer or
Aeris Array (for ExacTrac® - see
page 24)
Unique 5-Point tension lock
mechanism ensures masks
are securely anchored to
the overlay with fast, easy
removal
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
TM
TM
TM
IB06-CF-01
For MR Safe versions of any Freedom™ System components, please see our MR Safe section on page 40.
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
19
FREEDOMTM Cranial SRS and Head & Neck Modules
FREEDOMTM INTUITION CLICKTM MODULE FOR SRS AND HEAD & NECK
Freedom™ Arms Down
Hand Indexer provides
a comfortable patient
position for increased
accuracy of arms,
shoulder and clavicle.
The Intuition Click™ provides
positioning equivilent to a frame
based system but with superior
patient comfort
INTUITION CLICK PRECISION CRANIAL, C-SPINE
AND SHOULDER IMMOBILIZATION
SRS & SRBT
Creating a patient specific
customized Instaform mold with
the Intuition ClickTM
Freedom™ ShoulderTech
module for optimal
patient comfort and
accuracy of the C-spine
and shoulders
The Intuition ClickTM provides a system to produce customized
positioning that maintains submillimeter cranial and c-spine alignment.
All of the precision benefits, on all axis without compromising patient
comfort.
Intuition ClickTM on Freedom
Overlay
Li et al of Memorial Sloan Kettering Cancer Center, New York, USA
(Clinical experience with two frameless stereotactic radiosurgery (fSRS) systems using optical surface
imaging for motion monitoring - Journal of Applied Clinical Medical Physics Vol16 #4 2015)
INTUITION
TM
Hybrid Mask, Shoulder Tech and
completed Instaform mold
CONSUMABLES
Instaform™ Kit
Includes Shake Method Mixing containers and ThermoSheet Film (White)
supplied as 4 kits per case
IFF03
Instaform
Kit - Standard
4 ea.
IFF03-B
Instaform
Kit - Large
4 ea.
IFF03-D
Instaform
Kit - Extra Large
8 ea.
TM
TM
TM
See Page 6 for a full range of LT-Thermoplastic Masks and Drapes that are compatible with Intuition
ClickTM
20
www.cdrsys.ca
·
info@cdrsys.ca
·
Intuition™ Module for SRS and Head & Neck
Includes: 1x MM14, 1x STA-12, 1x LB-HP, 1x THS03 & accessory pack
1 ea.
MM14
Intuition ClickTM for custom Head, Neck & Shoulder molding
1 ea.
STA-12
FreedomTM Shoulder-Tech compatible with LB-SBRT, LB02 & SB02
1 ea.
LB-HP
FreedomTM Arms Down Hand Indexer for Varian Exact Index System
1 ea.
LB-HP-EVO
Freedom™ Arms Down Hand Indexer for Precise (Elekta / BL) Index System
1 ea.
LB-HP-MT
FreedomTM Arms Down Hand Indexer for Prodigy Index System
1 ea.
LB-HP-MT2
FreedomTM Arms Down Hand Indexer for Prodigy 2 Index System
1 ea.
LB-HP-IL1
Freedom™ Arms-Down Hand Indexer for Interloc Index System
1 ea.
LB-HP-PP
Freedom™ Arms-Down Hand Indexer for PinPoint Index System
1 ea.
MM14-FI
Freedom™ Intuition™ Frame Replacement Foam Kit (includes left/right modules)
1 ea.
T-STRAP
FreedomTM Universal Adjustable Support Strap
1 ea.
FDM-S-SRSHN
“The Freedom System provides our patients with superior levels of
comfort and allows 33% faster setup and treatment times compared to
our previous method”
“We recommend the Freedom System”
403.850.7035
· 1.855.856.7035
Please contact your CDR Representative to discuss upgrade paths from your existing MayoMold or Intuition Mold to
Intuition Click
For MR Safe versions of any Freedom™ System components, please see our MR Safe section on page 40.
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
21
FREEDOMTM Accessories
PRONE AND SUPINE CRANIAL IMMOBILIZATION SYSTEM
Allows In-Situ adjustment of c-spine curvature
Adjustable from +20o to -20o in 5o increments
RADIOSURGERY POSITIONING ARRAY
In Supine configuration elevates head and provides tilt
ideal for patients that cannot lay flat
PH08
FreedomTM System compatible
Prone and Supine Immobilization
System
Supine
PH08-SH
SRS & SRBT
Freedom Supine Adapter
PH08 set up for supine cranial treatment on the Freedom
Overlay showing adjustments for c-spine curvature
The CDR AerisArray provides accurate
implementation of the BrainLab ExacTrac® system
to verify Freedom 6 axis (X,Y,Z, Pitch, Roll and Yaw)
couch extension adjustments for Frameless SRS
treatments
TM
Prone
Also compatible with both the Comprehensive and
Basic Freedom Overlays (see page 10 & 11)
PH08 set up for prone cranial treatment on the Freedom Overlay
PRONE FACE MASK MAKER
The CDR Systems’ AuraSphere is a marker
use with the AerisArray to advance a patients’
corrected position to the utmost precision. They
are threaded, retroreflective and compatible
with BrainLab ExacTrac® system.
TM
Used as the initial setup for making the
Prone face mask when setting up patient
on PH08 system
TM
Quick adjust push button adjustment for
setting face mask position
ExacTrac® is a registered trademark of Brain Lab GmbH
22
66-1000
BL-A
66-1001
BL-AS1
AerisTM Positioning Array for BrainLab ExacTrac® System
1 ea.
Aeris AuraSphereTM for BrainLab ExacTrac® System
6 ea.
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
PH08-SD
Hands free Prone Mask Maker for Prone
Head and Neck Immobilization System
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
23
FREEDOMTM Cranial SRS and Head & Neck Treatment Modules
Freedom Couch extensions provide a rigid and lightweight platform for unobstructed
360º treatment of a patient's head and neck. Our couch extensions feature integrated pitch
adjustability which can be combined with the FreedomTM Roll Adapter (BM02-T) giving simple
and precise adjustment for pitch and roll. The Pitch and roll provided by the Freedom
Couch Extension combined with Yaw from your couch provides a full 6-axis adjustibility
for patient position correction based on Cone Beam image verification and/or Optical Service
Imaging (OSI)
STA-FILL (Pair)
Head and Neck
extension with
integrated pitch.
Compatible with Varian,
Elekta and others
couches.
For use when patient
treatment will be
on SB02- S1 Cranial
Extension Eliminate
additional trimming of
Intuition mold.
SB02-S1
SB-HP
Cranial couch extension
with integrated pitch.
Compatible with Varian,
Elekta and others
couches.
Freedom Arms Down
component for use
with Freedom couch
extensions
SB02-HP-EVO
0°
5°
Manual Positive and Negative pitch axis
adjustment (Up to +5o and -5o)
Freedom Roll Axis
Couch Extension
module
Manual Positive and Negative roll axis adjustment +/- 5o, integrated
0° scale
verifies roll axis correction
FreedomTM Treatment Module for SRS and Head & Neck
Includes: 1x SB02, 1x SB02-S1, 1x BM02-T, 1x SB-HP (specify couch) &1x STA-FILL
1 ea.
FDM-T-SRS
FreedomTM Treatment Module for SRS Only
Includes: 1x SB02-S1, 1x BM02-T, & 1x SB-HP (specify couch)
1 ea.
FDM-T-HN
FreedomTM Treatment Module for Head & Neck Only
Includes: 1x SB02, 1x BM02-T 1x SB-HP (specify couch) & STA-FILL
1 ea.
Freedom™ Cr anial Couch Extension (Short)
1 ea.
Freedom™ Head & Neck Couch Extension (Long)
1 ea.
Freedom™ Roll Adapter for 6-Axis Couch Extensions
1 ea.
Freedom™ Arm Down Indexer for Varian Exact™ Index System
1 ea.
SB-HP-EVO
Freedom™ Arm Down Indexer for Precise (Elekta / BL) Index System
1 ea.
SB-HP-MT
Freedom™ Arm Down Indexer for Prodigy Index System
1 ea.
SB-HP-MT2
Freedom™ Arm Down Indexer for Prodigy 2 Index System
1 ea.
SB-HP-IL1
Freedom™ Arms-Down Hand Indexer for Interloc Index System
1 ea.
STA-FILL
FreedomTM Contour modules for cranial intuition patients (includes left/right modules)
1 ea.
T-STRAP
FreedomTM Universal Adjustable Support Strap
1 ea.
FDM-T-SRSHN
The Freedom Couch extension allows precise
control over pitch and roll corrections
allowing the therapist to benefit from
optional rotation, pitch and roll correction
information provided on most linacs
24
BM02-T
Head and Neck
extension compatible
with BrainLab and
Elekta iBeam or
Connexion couches.
-5°
SRS & SRBT
COUCH EXTENSIONS
SB02
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
SB02-S1
SB02
BM02-T
SB-HP
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
25
FREEDOMTM SBRT Modules
FREEDOMTM SBRT MODULE
FREEDOMTM SPINE MODULE
(REQUIRES FREEDOMTM SBRT MODULE)
The Freedom™ Spine Module has been developed in conjunction with New York’s Memorial
Sloan Kettering Cancer Center and incorporates large and small low density low attenuation
carbon fiber bridges that are fitted with indexable side paddles.
The side paddles allow the patient to be alligned centrally on the simulation couch ensuring
the patients spine is straight. This allows for significantly faster patient setup, planning and
treatment.
SBRT-B1-SP1
SBRT-B2-SP1
SRS & SRBT
As well as Cranial SRS or Head & Neck treatments, the Freedom™ System can be configured for SBRT
type treatment using several additional components that attach and index in conjunction with the
Freedom Comprehensive Overlay.
Designed to utilize Vacuum LockTM cushions (see page 40), the Freedom System can be manipulated to
ensure your patient is extremely comfortable while giving you the highest levels of precision in SBRT
patient positioning.The Freedom System is easily configured for Arms Up or Arms Down ensuring
your patient will be as comfortable as possible.
The Freedom™ SBRT Module comprises of the following components:
AU-3
KN1-WDG-I
Freedom™ Arms Up
Module
Ergonomically designed
shape for superior patient
comfort and accuracy.
Freedom™ Knee
Positioner, indexable in 7
positions
SBRT-B1 & CMP-L
F-WDG-I
Freedom™ Large
Bridge and
AbdominalCompression
Assembly.
Freedom™ Foot Positioner,
indexable in 5 positions
SBRT-B2 & CMP-S
IB06 x2 (specify couch)
Freedom™ Small
Bridge and Abdominal
Compression Assembly.
CDR Standard Carbon
Fiber Index Bars
FDM-S-SBRT
FreedomTM System SBRT Module
Includes: 1x AU-3, 1x KN1-WDG-I, 1x F-WDG-I, 1x SBRT-B1, 1x SBRT-B2, 1x CMP-S,
1x CMP-L, 2x Indexing Bars (specify couch)
1 ea.
FDM-S-SPN
FreedomTM System Spine Module
Includes: 1x SBRT-B1-SP1, 1x SBRT-B2-SP1
1 ea.
FreedomTM Arms Up (compatible with LB-SBRT-1)
1 ea.
AU-3SA
FreedomTM Arms Up (Standalone - indexes to couch)
1 ea.
KN1-WDG-I
FreedomTM Knee Positioner - Indexable in 7 positions
1 ea.
F-WDG-I
FreedomTM Foot Positioner - Indexable in 5 positions
1 ea.
Freedom™ Foot & Positioner - Indexable in 7 positions w/ attached base and
integrated handles
1 ea.
SBRT-B2
FreedomTM Indexable Carbon Fiber Bridge - Small
1 ea.
SBRT-B1
FreedomTM Indexable Carbon Fiber Bridge - Large
1 ea.
SBRT-B1-SP1
FreedomTM Indexable Carbon Fiber Bridge - Large - fitted with Spine-Align
1 ea.
SBRT-B2-SP1
FreedomTM Indexable Carbon Fiber Bridge - Small - fitted with Spine-Align
1 ea.
FreedomTM Arm / Elbow Adjustable Support Straps
2 ea.
FreedomTM Universal Adjustable Support Strap
1 ea.
AU-3
F-WDG-I-B
AAS03
T-STRAP
For MR Safe versions of any Freedom™ System components, please see our MR Safe section on page 36.
26
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
See Page 40-43 for our full range of Vacuum Lock™ Cushions, pumps & Accessories
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
27
FREEDOMTM PNEUMATIC ABDOMINAL COMPRESSION BELT
SRS & SRBT
The FREEDOM™ Compression Belt is an easy to use pneumatic abdominal compression system
for managing movement and tumor motion while maintaining maximum comfort to the patient.
The FREEDOM™ Compression Belt can be used in conjunction with the SBRT modules of the
FREEDOM™ System or as a
standalone device.
Maximum patient comfort
Anatomically shaped following ethnographic research
Can be used prone or supine
Large easy to read scale ensuring each setup is replicated precisely
Single handed inflation and deflation with the incorporated sphygmometer
3 sizes of Freedom Compression Belt available (124cm, 149cm & 174cm) which accommodate most patient sizes.
28
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
COMP-BLT
FreedomTM Compression Belt Kit
Includes 124cm & 149cm Compression Belts and Sphygmomanometer
1 ea.
COMPBLT-1
FreedomTM Compression Small Compression Belt (124cm)
Includes Sphygmomanometer
1 ea.
COMPBLT-2
FreedomTM Compression Large Compression Belt (149cm)
Includes Sphygmomanometer
1 ea.
COMPBLT-3
FreedomTM Compression Extra Large Compression Belt (174cm)
Includes Sphygmomanometer
1 ea.
COMPBLT-SP
FreedomTM Compression Belt Sphygmomanometer
1 ea.
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
29
BREAST & THORAX
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
31
SABELLA FLEXTM DUAL AXIS POSITIONING SYSTEM FOR BREAST & THORAX
Optional indexable
donut-style head support,
available in large and
small sizes
of Breast and Thorax
patient positioning
has arrived.
The unique patent pending
Dual AxisTM design allows
for adjustable posture
and a much wider range of
positions than conventional
breast and lung systems.
Optimal chest slop and breast
positioning is easily achievable
giving more accurate and safer
treatment options and better
patient outcomes.
Interchangeable arm/
shoulder bolsters,
allowing adjustable height
and width for optimum
patient comfort and
positioning
Prominent millimeter
scale on top and
side surface ensures
patient positioning is
fast and simple
High stability
SafeLockTM angle
range 0o - 28o
ensures ultimate
safety of patient
and therapist
Secondary
flex position
provides new
patient set-up
options before
possible
The SaBella FlexTM can quickly and
securely be adjusted and indexed to
maximize treatment requirements and
patient comfort with your patient in situ.
This saves time and cost while maximizing
patient comfort and treatment accuracy
With a carbon fiber construction, the SaBella
FlexTM weighs up to 50% less than conventional
breast systems at just 12.2 lbs / 5.5 kg, and with
a maximum patient load of 400lbs, the SaBella
FlexTM provides a strong and stable platform for your
patient.
The SaBella Flex can be used for breast, lung, SBRT and
head and neck treatments.
32
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
BREAST & THORAX
A NEW ERA
Upper indexing
SafeLockTM system
allowing single handed
operation with 8 index
positions
Optional breast Support
LT-ThermoplasticTM
Module available
Dual purpose patient stop
and leg rest indexable
in 9 positions to fit most
patients.
Combined stop and knee
support also available
Optional Vacuum
LockTM cushion
indexing module
(lower section
shown)
SaBella FlexTM Dual Axis Precision Positioning System for Breast & Thorax is compatible with any indexable treatment couch.
See page 13 for compatible index bars.
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
33
SABELLA FLEXTM DUAL AXIS POSITIONING SYSTEM FOR BREAST & THORAX
Use the optional Head & Neck Positioning Module, with the SaBella FlexTM for a complete solution for
COPD patients that cannot tolerate a horizontal position.
The SaBella Flex Vacuum Lock module
increases positioning accuracy further.
The SaBella Flex Head & Neck module allows for masks to be attached using CDR's
unique 5 point clamp.
15°
10°
15°
range
Clinical Benefits
•
•
•
•
•
•
Dual FlexTM adjustability allowing a wider range of patient positioning than conventional breast and Thorax
boards.
Elevation angles of 0o, 10o, 15o and 20o. Custom angles between 3.5o and 28o available
Patented Secondary Flex system provides an indexable and comfortable method to optimize your patient's
posture, chin and cranial position independantly of chest slope while enhancing breast position.
SafeLock system provides unmatched stabilty eliminating potential injuries to patients or therapists.
VacuumLockTM cushion compatible
Lightweight with carry handles for ease of moving and a wall mount is available for ease of storage.
Patient Benefits
•
•
•
•
Comfortable indexable arm, neck and head supports.
Adjustments can be made quickly minimizing patient set-up & treatment time.
COPD patient compatible.
Secure, sturdy feel without any flex regardless of patient size.
0°
The SaBella Flex offers the most versatil platform for supine breast and thorax treatment
SBS14-E
SaBella Flex™ Dual Axis Precision Positioning System for Breast & Lung Elite Package
Includes: SaBella Flex™, 3x Angle Blocks (10°, 15° & 20°), Patient Stop, 2ea of C1, C2 & C3
Arm/Shoulder Positioners, 1x Head Rest Adapter & 1x Head Rest, Wall Mount, Vacuum Lock
Module, Breast Support Module, Head & Neck Module & wall mount
1 ea
SBS14
SaBella Flex™ Dual Axis Precision Positioning System for Breast & Lung Standard Package
Includes: SaBella Flex™, 3x Angle Blocks (10°, 15° & 20°), Patient Stop,
2ea of C1 & C2 Arm/Shoulder Positioners, 1x Head Rest Adapter, 1x Head Rest & wall mount
1 ea
SaBella Flex™ Dual Axis Precision Positioning System for Breast & Lung Basic Package
Includes: SaBella Flex™, 3x Angle Blocks (10°, 15° & 20°), Patient Stop,
2x C2 Arm/Shoulder Positioners, 1x Head Rest Adapter & 1x Head Rest
1 ea
SBS14-WM
SaBella Flex™ Wall Mount
1 ea
SBS14-VBM
SaBella Flex™ Vacuum Lock™ Module (Includes upper & lower indexing system and 2x
T-shape Vacuum Lock cushions
1 ea
SBS14-HNM
SaBella Flex™ Head & Neck Mask Module (includes SL32S LT-Thermoplastic)
1 ea
SBS14-BSM
SaBella Flex™ Breast Support Module (Includes: LT-Thermoplastic & Handles
1 ea
SBS14-GDM
SaBella Flex™ Gel Donut Module (Includes 1x Lge & 1x Sml Gel Donut and Indexing Module)
1 ea
SBS14-B
Compatibillity
•
•
•
All Linear Acclerators including Tomotherapy.
All CT & PET scanners with bore size greater than 60cm.
All 3D & 4D Optical Imaging Systems.
SaBella FlexTM Technical Specifications
34
MATERIALS
Ultra low density carbon fiber
WEIGHT
5.5 kg / 12.2 lbs
PATIENT WEIGHT LIMIT
182 kg / 400 lbs
DIMENSIONS
55cm X 90cm X 16cm (flat position)
MR SAFE
Available (contact sales representative)
CT BORE SIZE
Greater than 60cm
VB-T7993F20 Vacuum Lock™ Cushion 79x93cm 20L Fill for supine Breast Boards
www.cdrsys.ca
1 ea
PLV-1232P
LT-Thermoplastic™ Immobilization System Perforated 12" (305mm) Wide
5 ea
PLV-1232S
LT-Thermoplastic™ Immobilization System Solid 12" (305mm) Wide
5 ea
SBS14-PLV
SaBella Flex™ SaBella Flex PLV Handle
2 ea
For CDR Index Bars compatible with the SaBella Flex, please see page 13
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
35
BREAST & THORAX
The SaBella Flex Support Module allows the
use of thermoplastic masks to aid breast positioning. See page 10 for compatible solid and
perforated LT-Thermoplastics.
2°
Dual pivoting angles for maximum configuration control
SaBella ProneTM Standard PB06
Standard height with standard cushion set Advanced Prone Breast Patient
Positioning elevates chest wall 24cm from couch top, this design provides
maximum patient support. The treatment breast opening is adjustable from
18-28cm.
PB06-2cm: Order ID to replace standard cushion set with firm cushion set.
SaBella ProneTM Superclav Standard PB06-S
Standard height Advanced Prone Breast Patient Positioning elevates chest
wall 24 cm from couch top. The open design is engineered for Superclav
access and multi-field treatments. The treatment breast opening adjustable
from 18-28cm.
PB06-S-2cm: Order ID to replace standard cushion set with firm cushion set.
SaBella ProneTM Low Profile PB06-LP
Low profile Advanced Prone Breast Patient Positioning elevates chest wall
17 cm from couch top, this design provides maximum patient support. The
treatment breast opening is adjustable from 18-28cm.
PB06-LP-2cm: Order ID to replace standard cushion set with firm cushion set.
SaBella ProneTM Superclav Low Profile PB06-S-LP
18cm configuration
Engineered for comfortable, accurate and quick setup of breast patients in the
prone position. Allowing for lateral offsetting of patient when necessary.
PB06-S-LP-2cm: Order ID to replace standard cushion set with firm cushion
set.
The benefits of the Prone Breast technique have been well documented
and include:
• Displacement of the lumpectomy cavity away from chest wall, heart and lung
• Reduction in cardiac systole and respiratory movement
• Enhanced cosmetic results with reduced soreness and skin reaction
• Optimized daily reproducibility
BREAST & THORAX
Low profile Advanced Prone Breast Patient Positioning elevates chest wall
17 cm from couch top. The open design is engineered for Superclav access
and multi-field treatments. The treatment breast opening adjustable from
18-28cm.
28cm configuration
Please contact your CDR representative for replacement pad sets
For a MR Safe version of any of the Prone Breast boards please see our MR Safe section on page 41
Configurations adjustable in
increments of 2cm
The Contralateral Breast Support Plate
and cushion are Interchangeable for left
or right side
Low Profile elevates patient 17cm from couch top
for accommodating patients on all CT/Sim including
smaller bore scanners.
PB06-CBP
Standard height elevates patient 24cm
from couch top specifically optimized
for large bore CT/Sim.
PF01
SaBella Prone™ Contralateral
Breast Support Carbon Fiber
Curved
PB06-WDG
10° angled Contralateral Breast support
wedge compatible with all PB06 models
and is adjustable for all opening setting
of 18-28cm
Prone Head
Support Module
Indexing bars sold separately.
36
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
37
SUPINE BREAST POSITIONING
LT-THERMOPLASTIC CUP WITH STRAP
KOILIA MIKROS BELLY BOARD
The Koilia MikrosTM Belly Board is an extremely lightweight, adjustable stabilization platform
manufactured from advanced radio-translucent materials. Our unique design provides accurate
positioning while minimizing uncomfortable pressure points. It can be customized into multiple
configurations using the included modules.
BI-B
Indexable to treatment couch top with standard
indexing bar in two locations
*recommended size
Easy to clean
Size B 5cm x 22cm
Customizable patient setup using module set
Setup scale on both sides
Extremely light weight
Soft without any hard edges, for ultimate
patient comfort
Breast Immobilization Strap in use
BI-C
Koilia Mikros Belly Board Includes modules:
A-1 A-2 B-1 C-1 D-1
The breast positioning LT-Thermoplastic cup with strap
is an accessory that provides lift to the patient’s breast to
avoid any unwanted fold during the radiotherapy treatment. Skin dose can be reduced when skin folds
are minimized.
Interchangeable Head/Chest Support
Removable Small Bowel
Compression Module
Easily repositioned with precision.
BI-D
Size D 10cm x 28cm
BREAST & THORAX
BB09-D
Size C 8cm x 25cm
The thermoplastic part of the Breast Immobilization Strap
can be heated up in hot water and molded for best fit to
patient. It has no solid area, instead it has a consistent
perforated pattern, maximizing skin sparing.
Interchangeable Head/Chest Support
Caudal Aperture
The strap is secured after molding and taped into place to
ensure reproductivity.
Removable Belly Support
Indexable Base
38
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
39
(see page 36 & 37 for product features)
CT & Treatment Overlays (see page 18 & 19 for product features)
FDM-S-BAK-K
LB-SBRT-01-K
FDM-S-STD-K
CFJ02-K
RS02-K
NWB02-K
Freedom™ Basic CT/Treatment Overlay - includes CFJ02 - MR SAFE
1 ea.
Freedom™ Basic Overlay Package - includes: 1xLB02-K, 1x CFJ02-K, 2x Index Bars - MR SAFE
1 ea.
Freedom™ Comprehensive CT/Treatment Overlay - includes CFJ02 - MR SAFE
1 ea.
Freedom™ Comprehensive Overlay Package - includes: 1xLB-SBRT-1-K, 1x CFJ02-K, 1x
SBRT-Fill, 2x Index Bars MR SAFE
1 ea.
Freedom
Horseshoe Spring Immobilization Clamp - MR SAFE
1 ea.
Freedom
Shoulder Retractors for Freedom Overlays - MR SAFE
2 ea.
TM
TM
FreedomTM Wishbone Mask Stabilizer - MR SAFE
1 ea.
Cranial SRS and Head & Neck Components (see page 16 & 17 for product features)
FDM-S-SRSHN-K
STA-12-K
LB-HP-K
LB-HP-EVO-K
LB-HP-MT-K
LB-HP-MT2-K
Freedom™ System Intuition™ Module for SRS and Head & Neck - includes: 1xMM14, 1x
STA-12-K,
1xLB-HP-K (Specify Couch) & 1x THS03 - MR SAFE
1 ea.
FreedomTM Shoulder-Tech compatible with LB-SBRT, LB02 & SB02 - MR SAFE
1 ea.
Freedom
1 ea.
TM
Arms Down Hand Indexer for Exact (Varian) Index System - MR SAFE
FreedomTM Arms Down Hand Indexer for Precise (Elekta / BL) Index System - MR SAFE
1 ea.
FreedomTM Arms Down Hand Indexer for Prodigy Index System - MR SAFE
1 ea.
FreedomTM Arms Down Hand Indexer for Prodigy 2 Index System - MR SAFE
1 ea.
SBRT Components (see page 26 & 27 for product features)
FDM-S-SBRT-K
1 ea.
FDM-S-SPN-K
Freedom™ System Spine Module for Comprehensive Overlay (LB-SBRT-01-K) MR SAFE includes: 1x SBRT-B1-SP1-K & 1x SBRT-B2-SP1-K - MR SAFE
1 ea.
AU-3-K
FreedomTM Arms Up (compatible with LB-SBRT-1) - MR SAFE
1 ea.
KN1-WDG-I-K
FreedomTM Knee & Leg Positioner - Indexable in 7 positions - MR SAFE
1 ea.
F-WDG-I-K
Freedom
Foot & Leg Positioner - Indexable in 7 positions - MR SAFE
1 ea.
SBRT-B2-K
Freedom
Indexable Carbon Fiber Bridge - Small - MR SAFE
1 ea.
SBRT-B1-K
Freedom
Indexable Carbon Fiber Bridge - Large - MR SAFE
1 ea.
CMP-S-K
FreedomTM Lateral Compression Assembly - Small - MR SAFE
1 ea.
CMP-L-K
Freedom
1 ea.
COMP-BLT-K
Freedom™ Compression Belt Kit includes: 124cm and 149cm Belts & 1 Sphygnometer - MR
SAFE
SBRT-B1-SP1AC-K
Freedom™ SpineAlign™ Bridge Configured for Patient Spine Alignment MR SAFE Small
SBRT-B2-SP1AC-K
Freedom™ SpineAlign™ Bridge Configured for Patient Spine Alignment MR SAFE Large
SBRT-B1-SP1-K
Freedom™ Indexable Bridge - Large - with Spine Alignment Paddles - MR Safe
1 ea.
SBRT-B2-SP1-K
Freedom™ Indexable Bridge - Small - with Spine Alignment Paddles - MR Safe
1 ea.
40
TM
TM
TM
Lateral Compression Assembly - Large - MR SAFE
www.cdrsys.ca
·
Advanced Prone Breast Patient Positioning - Standard height & standard cushion - MR SAFE
1 ea.
PB06-2cm-K
Advanced Prone Breast Patient Positioning - Standard height & firm cushion - MR SAFE
1 ea.
PB06-LP-K
Advanced Prone Breast Patient Positioning - Low profile & standard cushion- MR SAFE
1 ea.
PB06-LP-2cm-K
Advanced Prone Breast Patient Positioning - Low profile & firm cushion - MR SAFE
1 ea.
PB06-S-K
Advanced Prone Breast Patient Positioning - SUPERCLAV- standard height & cushion - MR
SAFE
1 ea.
PB06-S-2cm-K
Advanced Prone Breast Patient Positioning - SUPERCLAV - standard height & firm cushion MR SAFE
1 ea.
PB06-S-LP-K
Advanced Prone Breast Patient Positioning - SUPERCLAV - low profile & standard cushion MR SAFE
1 ea.
Prone Breast Patient Positioning - SUPERCLAV - low profile & firm cushion - MR
PB06-S-LP-2cm-K Advanced
SAFE
1 ea.
PB06-WDG-K
Advanced Prone Breast Patient Positioning - Contralateral Breast Support
1 ea.
PF01-K
Advanced Prone Breast Patient Positioning - Prone Head Support
1 ea.
Koilia Mikros (see page 39 for product features)
BB09-D
Koilia Mikros Belly Board
1 ea.
Standard Indexing Bars
Freedom™ System SBRT Module for Comprehensive Overlay (LB-SBRT-01-K) - includes:
1xAU-3-K, 1x KN1-WDG-I-K, 1xF-WDG-I-K, 1x SBRT-B1-K, 1x SBRT-B2-K, 1x CMP-S-K, 1x
CMP-L-K 2x IB06-K type Indexing bars - MR SAFE
TM
PB06-K
info@cdrsys.ca
·
403.850.7035
1 ea.
1 ea.
IB06-K
Standard Kevlar Index Bar - Exact (Varian) Index System - MR SAFE
1 ea.
IB06-EVO-K
Standard Kevlar Index Bar - Precise / Evo (Elekta / BL) Index System Index System- MR SAFE
1 ea.
IB06-MT-K
Standard Kevlar Index Bar - Prodigy Index System - MR SAFE
1 ea.
IB06-MT2-K
Standard Kevlar Index Bar - Prodigy 2 Index System - MR SAFE
1 ea.
SBRT Wide Indexing Bars
IB06-01-K
SBRT Wide Kevlar Fiber Index Bar - Exact (Varian) Index System - MR SAFE
1 ea.
IB06-EVO-01-K
SBRT Wide Kevlar Fiber Index Bar - Precise / Evo (Elekta / BL) Index System Index System - MR
SAFE
1 ea.
IB06-MT-01-K
SBRT Wide Kevlar Fiber Index Bar - Prodigy Index System - MR SAFE
1 ea.
IB06-MT2-01-K
SBRT Wide Kevlar Fiber Index Bar - Prodigy 2 Index System - MR SAFE
1 ea.
1 ea.
· 1.855.856.7035
All CDR Systems’ products are available as an MR Safe option. Please contact your CDR
representative for further information.
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
41
MR SAFE
LB02-K
AIDS & ACCESSORIES
42
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
43
PRECISION TABLE PADS
CDR Precision Table Pads provide a convenient way to improve patient comfort and
reduce the risk of pressure damage . Table pads are available in a variety of sizes and
thicknesses and can also be manufactured in custom sizes.
STANDARD CDR TABLE (48") PADS
LONG TABLE PAD
20in
(51cm)
72in
(183cm)
STANDARD TABLE PAD
20in
(51cm)
48in
(122cm)
Radio translucent, ultra comfortable high
quality foam with no seams
Easily cleaned with standard practices
Various standard thicknesses available
Custom sizes available
Standard table pad shown on on CT couch
MR safe, indexable table pad options are
available (minimum 1 inch thickness)
THICKNESSES AVAILABLE
2in
(51mm)
1.5in
(51mm)
1in
(25mm)
0.5in
(13mm)
0.25in
(6mm)
TP01F-6
122cm x 51cm x 6mm CDR Standard (48"/122cm) Table Pad - 0.25" / 6mm Thickness
TP01F-13
122cm x 51cm x 13mm CDR Standard (48"/122cm) Table Pad - 0.5 / 13mm Thickness
TP01F-25
122cm x 51cm x 25mm CDR Standard (48"/122cm) Table Pad - 1" / 25mm Thickness
TP01F-38
122cm x 51cm x 38mm CDR Standard (48"/122cm) Table Pad - 1.5" / 38mm Thickness
TP01F-51
122cm x 51cm x 51mm CDR Standard (48"/122cm) Table Pad - 2" / 51mm Thickness
Custom sizes and shapes are available. Contact your CDR representative for more information.
LONG CDR TABLE (72") PADS
TP01F-6L
183cm x 51cm x 6mm CDR Long (72"/183cm) Table Pad - 0.25" / 6mm Thickness
TP01F-13L
183cm x 51cm x 13mm CDR Long (72"/183cm) Table Pad - 0.5" / 13mm Thickness
TP01F-25L
183cm x 51cm x 25mm CDR Long (72"/183cm) Table Pad - 1" / 25mm Thickness
TP01F-38L
183cm x 51cm x 38mm CDR Long (72"/183cm) Table Pad - 1.5" / 38mm Thickness
TP01F-51L
183cm x 51cm x 51mm CDR Long (72"/183cm) Table Pad - 2" / 51mm Thickness
44
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
ACCESSORIES
Custom sizes and shapes are available. Contact CDR representative for more information.
45
VACUUM LOCK CUSH I ON SI ZE S
VB-4080F15 Vacuum Lock cushion 40x80cm 15L fill for extremities
VB-5070F15
Vacuum Lock cushion
50x70cm 15L fill for extremities
VB-7070F20
Vacuum Lock cushion
70x70cm 20L fill for upper body
VB-70150F60
Vacuum Lock cushion
70x150cm 60L fill for hip or pelvis
VB-80150F65
Vacuum Lock cushion
80x150cm 65L fill for hip or pelvis
Structurally reinforced nylon with double welded
seam giving ultimate strength and durability
VB-10070F30
Vacuum Lock cushion
100x70cm 30L fill for hip, pelvis & upper body
Stepped valve for secure vacuum hold and ease of use
VB-100100F30
Vacuum Lock cushion
100x100cm 30L fill for upper body
Ultra low density bead fill provides optimal patient
conformity
VB-100150F70
Vacuum Lock cushion
100x150cm 70L fill for pelvis or full body
VB-100220F120
Vacuum Lock cushion
100x220cm 120L fill for whole body
OPTIONAL INDEXERS
VB-T6565F7
Vacuum Lock cushion
65x65cm 7L fill T shaped for head and shoulders
A single Indexer may be used on any one cushion. An additional indexer may be used as required
for increased reposition accuracy on longer cushion
VB-100130PENF45
Vacuum Lock cushion
100x130cm 45L fill pentagon shape
VB-T7993F20 Vacuum Lock cushion
79x93cm 20L fill for SaBella FlexTM
Vacuum Lock Cushion shown on Freedom Total Body Precision Patient Immobilization System, Arms Up Configuration (LB-SBRT).
Proven and tested to hold shape through course
of treatment
IB06-BA
Custom sizes and shapes are available. Contact your CDR Representative for more information
IB06-BA-BX
46
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
47
ACCESSORIES
*Lead times for Vacuum lock cushions may vary, please confirm for availability
DIGITAL HEATING EQUIPMENT
ACCESSORIES
DIGITAL WATER BATH
VB-HOSE
Vacuum Lock™cushion adapter hose
Low-point drain with side mounted tap
ensures that the waterbath fully drains
when required.
VB-HOSE-G
Vacuum Lock™cushion adapter hose with pressure gauge
showing optimal pressures for Vacuum LockTM cushions.
We can manufacture custom hoses to allow our Vacuum LockTM cushions
to work with any pump and our pumps to work with any vacuum cushion.
Please contact your CDR representative for more information.
Water Drain
120V/60hz, 1440 Watt heating element
provides quick heat-up and even heat
(North American specs)
VBPUMP1
VBPUMP1-EU
Standard vacuum pump with manually adjusted
inflate/deflate connections. This pump is small in size, portable and has an optimal suction rate for forming of Vacuum
Lock™ cushion.
LED digital microprocessor controlled
water bath with precision temperature
control within
+/- 0.5C (+/- 1F)
WB-LRG-2-EU
Digital Water bath
(220V/50hz)
WB-LRG-2
Digital Water bath
Met Lab approved to UL standards
60601-1 and CSA #C22.2NO.601
Micro Processor
Control
VBPUMP2
Vacuum Lock™ pump system with foot pedal operated inflate/
deflate and an audible pressure alarm.
Exterior Dim: 84cm x 66cm x 20cm
(33”x26”x8”)
Interior Dim: 66cm x 56cm x 13cm
(26”x22”x5”)
DIGITAL DRY HEAT THERMOPLASTIC WARMING DRAWER
VBPUMP2-EU
Vacuum Lock™ standard 220V pump with built in pressure
gauge
VBHOOKS
Vacuum Lock™ Hooks
Package of 10 vacuum cushion hooks with rubber protected
ends.
Space-saving compact design
VBMSC
Insulated case
Mask Shims
0.5mm Mask Shim for perfecting the mask fit. Comes in
packages of three and six. Can be stacked to achieve thicker
shim. See page 9 for full details.
DHCO-EU
DHCO-01
Digital Warming Drawer (220V/50hz)
Digital Warming Drawer
Today’s need for universal precautions to reduce cross-contamination
during patient care, are met by using a dry heat system. Warming Drawer
goes from room temperature to ready in less than 10 minutes.
Setting the temperature is easy and simple with the digital temperature
control and a highly efficient convection system ensures even heat
distribution.
It takes approximately 5 to 15 minutes for thermoplastics to reach
optimal molding temperature, depending on the size and the type of
thermoplastic being heated.
Dry Heating eliminates the inconveniences
of using water
Digital temperature setting either in Celsius
or Fahrenheit
3” Touch interface for simple settings
adjustments
Outside dimensions: 79cm x 58cm x 13cm
Inside dimensions: 65cm x 51cm
Sliding drawer opens fully to provide unrestricted access to the material.
48
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
49
ACCESSORIES
Vacuum Lock™ Mobile Hanging Rail Cart
Stores multiple vacuum cushions safely and rolls on
wheels, adjustable height in three positions : 140 cm,
152 cm and 165 cm.
SOLID & GEL BOLUS
GEL BOLUS
TIMO HEAD & NECK SUPPORT CUSHIONS
Gel Bolus products are flexible, tissue-equivalent build-up materials which, when applied on a patient, increase the
surface dose. The Flexible Gel Bolus is available with or without a polyethylene skin.
Custom sizes are also available.
Durable polyurethane-foam head and neck support cushions provide consistent repeatable positioning of the
head. TIMO Head & Neck Support Cushions are available both individually or in a set of six.
gBolus-A comes in a layer of polyethylene skin
g-BOLUS-A-7x20x0.3
g-BOLUS-A-30x30x0.3
g-BOLUS-A-40x40x0.3
7cm x 20cm
30cm x 30cm
40cm x 40cm
thickness: 0.3cm
thickness: 0.3cm
thickness: 0.3cm
g-BOLUS-A-10x15x0.5
g-BOLUS-A-15x15x0.5
g-BOLUS-A-30x30x0.5
g-BOLUS-A-30x50x0.5
g-BOLUS-A-30x56x0.5
g-BOLUS-A-35x35x0.5
g-BOLUS-A-40x40x0.5
g-BOLUS-A-40x56x0.5
g-BOLUS-A-50x50x0.5
g-BOLUS-A-56x56x0.5
10cm x 15cm
15cm x 15cm
30cm x 30cm
30cm x 50cm
30cm x56cm
35cm x 35cm
40cm x 40cm
40cm x 56cm
50cm x 50cm
56cm x 56cm
thickness: 0.5cm
thickness: 0.5cm
thickness: 0.5cm
thickness:0.5cm
thickness: 0.5cm
thickness: 0.5cm
thickness: 0.5cm
thickness: 0.5cm
thickness: 0.5cm
thickness: 0.5cm
g-BOLUS-A-10x15x1.0
g-BOLUS-A-15x15x1.0
g-BOLUS-A-20x20x1.0
g-BOLUS-A-30x30x1.0
g-BOLUS-A-30x50x1.0
g-BOLUS-A-40x40x1.0
g-BOLUS-A-40x56x1.0
g-BOLUS-A-50x50x1.0
g-BOLUS-A-56x56x1.0
10cm x 15cm
15cm x 15cm
20cm x 20cm
30cm x 30cm
30cm x 50cm
40cm x 40cm
40cm x 56cm
50cm x 50cm
56cm x 56cm
thickness: 1.0cm
thickness: 1.0cm
thickness: 1.0cm
thickness: 1.0cm
thickness: 1.0cm
thickness: 1.0cm
thickness: 1.0cm
thickness: 1.0cm
thickness: 1.0cm
g-BOLUS-A-15x15x1.5
g-BOLUS-A-30x30x1.5
g-BOLUS-A-35x35x1.5
15cm x 15cm
30cm x 30cm
35cm x 35cm
thickness: 1.5cm
thickness: 1.5cm
thickness: 1.5cm
g-BOLUS-A-10x15x2.0
g-BOLUS-A-15x15x2.0
g-BOLUS-A-30x30x2.0
10cm x 15cm
15cm x 15cm
30cm x 30cm
thickness: 2.0cm
thickness: 2.0cm
thickness: 2.0cm
g-BOLUS-A-15x15x3.0
g-BOLUS-A-30x30x3.0
15cm x 15cm
30cm x 30cm
thickness: 3.0cm
thickness: 3.0cm
g-BOLUS-A-15x15x4.0
g-BOLUS-A-30x30x4.0
15cm x 15cm
30cm x 30cm
thickness: 4.0cm
thickness: 4.0cm
CDR TIMO Foam Universal Head Support Pack (sizes A-F)
1 ea.
THS03-U-A
CDR TIMO Foam Universal Head Support Size A (red)
1 ea.
THS03-U-B
CDR TIMO Foam Universal Head Support Size B (green)
1 ea.
THS03-U-C
CDR TIMO Foam Universal Head Support Size C (blue)
1 ea.
THS03-U-D
CDR TIMO Foam Universal Head Support Size D (brown)
1 ea.
THS03-U-E
CDR TIMO Foam Universal Head Support Size E (yellow)
1 ea.
THS03-U-F
CDR TIMO Foam Universal Head Support Size F (grey)
1 ea.
THS03-U
SILVERMAN HEAD SUPPORTS
Durable Silverman head supports that provide consistent comfortable positioning of the patients head.
Compatible with CDR’s FreedomTM, SaBellaTM and other patient positioning systems
THS03
CDR Silverman Head Support Pack (sizes A-G)
3 ea.
THS03-1
CDR Silverman Head Support Pack (sizes A-G)
1 ea.
THS03-A
CDR Silverman Head Support Size A
3 ea.
THS03-B
CDR Silverman Head Support Size B
3 ea.
THS03-C
CDR Silverman Head Support Size C
3 ea.
THS03-D
CDR Silverman Head Support Size D
3 ea.
THS03-E
CDR Silverman Head Support Size E
3 ea.
THS03-F
CDR Silverman Head Support Size F
3 ea.
THS03-G
CDR Silverman Head Support Size G
3 ea.
gBolus-B is without skin and is ideal for custom shaping
30cm x 30cm
30cm x 30cm
30cm x 30cm
30cm x 30cm
30cm x 30cm
30cm x 30cm
thickness: 0.5cm
thickness: 1.0cm
thickness: 1.5cm
thickness: 2.0cm
thickness: 3.0cm
thickness: 4.0cm
Silverman head supports for use with Freedom IntuitionTM & MayomoldTM have an additional indexing point to
allow the patients head to be suitably positioned in the Intuition FrameTM or MayomoldTM
SOLID BOLUS
Solid Bolus is ideal for irregularly-surfaced anatomical areas that will benefit from rigid conformal bolus material.
Available thicknesses:
2.4 mm
3.2 mm 6.4 mm
9.6 mm.
1 2
4.8 mm
Available sizes:
Contact your CDR representative for Bolus starter
kits and specifications suited to your application.
50
7 cm x 22 cm
10 cm x 10 cm
20 cm x 22 cm
30 cm x 30 cm
15 cm x 15 cm
5 cm x 6 cm
43 cm x 43 cm
30 cm x 45 cm
51 cm x 76 cm
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
CDR Silverman Head Support Pack - MM Type (sizes A-G)
1 ea.
THS03-A-MM
CDR Silverman Head Support MM Type Size A
3 ea.
THS03-B-MM
CDR Silverman Head Support MM Type Size B
3 ea.
THS03-C-MM
CDR Silverman Head Support MM Type Size C
3 ea.
THS03-D-MM
CDR Silverman Head Support MM Type Size D
3 ea.
THS03-E-MM
CDR Silverman Head Support Size MM Type E
3 ea.
THS03-F-MM
CDR Silverman Head Support Size MM Type F
3 ea.
THS03-G-MM
CDR Silverman Head Support Size MM Type G
3 ea.
THS03-H-MM
CDR Silverman Head Support Size MM Type H
3 ea.
THS03-MM
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
51
ACCESSORIES
g-BOLUS-B-30x30x0.5
g-BOLUS-B-30x30x1.0
g-BOLUS-B-30x30x1.5
g-BOLUS-B-30x30x2.0
g-BOLUS-B-30x30x3.0
g-BOLUS-B-30x30x4.0
GRIP RINGS
WEDGES, SUPPORTS & POSITIONING AIDS
GRIP RINGS are a simple but effective way to increase patient comfort
through setup and treatment. Patient comfort is accuracy.
G-RING-S
CDR Systems Grip Ring Small (Paediatric & Adult
G-RING-M
CDR Systems Grip Ring Medium (Adult)
G-RING-L
CDR Systems Grip Ring Large (Large Adult)
G-RING-XL
CDR Systems Grip Ring Extra Large (Large Adult Feet)
20cm
18cm
38cm
48cm
KN1-WDG-I
CUTTING & MARKING ACCESSORIES
Indexable in 7 positions knee
and leg positioner
45cm
49cm
KN-10-I
Indexable knee and leg positioner Indexable in 5 positions
PF01
Prone Head Support Module
CDR-RULES
RULER. CDR Systems set-up. Measures 15cm x 7cm.
SQR-CUSH-1
31cm
18cm
MM-KN1
OLFA KNIFE. This popular, heavy-duty cutter features a contoured ABS handle
and a ratchet wheel blade-lock.
31cm
F-WDG-I
MM-KN1-XB
SOLID OLFA BLADE. Heavy-duty solid blade ideal for cutting through thick material. Made of high-quality Japanese grade carbon tool steel and designed for
unparalleled sharpness and superior edge retention. Long lasting and durable.
39cm
48cm
Indexable foot positioner
indexable in 5 positions
34.5° 51cm
10cm
30cm
KN-WDG
Knee / Thigh wedge Indexable
in 5 positions
25cm
SQR-CUSH-2
6cm
30cm
25cm
SC-01
MUSCLE SHEAR. Bent design, stainless steel blades for firm grip and cut. Big
comfortable plastic handles. Cuts thermoplastic and other tough materials.
SQR-CUSH-3
4cm
SERRATED EDGE STAINLESS STEEL SCISSORS. 5” stainless steel scissors are
ideal for consumer and industrial applications. High quality stainless steel
blades meet perfectly for precision cutting. The material being cut is held in
place by one blade which is slightly serrated providing maximum control.
Standard radio translucent firm
table pad (122cm x 51cm x 2.5cm)
Long radio translucent firm table
pad (183cm x 51cm x 2.5cm)
Fine Line - DecoColor Opaque Paint Marker, Red
www.cdrsys.ca
TP01F
Elevates the head and shoulders
for added comfort. The raised
base allows patients in prone
position to breathe easier, adding
greater comfort for the patient.
TP01F-L
DC-RED
52
Available in a variety of thicknesses
Refer to page 44 for our full range
30cm
PF002
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
25cm
SQR-CUSH
Set of Standard Square Sponge
cushions. Includes:
SQR-CUSH-1
SQR-CUSH-2
SQR-CUSH-3
53
ACCESSORIES
Precision Table Pads
SC-02
WEDGES, SUPPORTS & POSITIONING AIDS
All wedges, supports and positioning aids are radio translucent, MRI
safe and specially treated to allow sanitation with common cleaning
techniques and solutions. Durable, staph-check material, which is
hypoallergenic and antimicrobial.
*This foam positioner can be ordered
as part of the Multi Pack Set (Z-10701)
45 angle degree Foam
Positioner Wedge
45°
Z-10302
65/45 angle degree round
Foam Positioner Wedge
28cm
20°
35°
24.7cm
17.8cm
Z-10104*
7.6cm
Z-10101*
20 angle degree Foam
Positioner Wedge
Z-10405
91.4cm
15 angle degree Foam
Positioner Wedge
25.4cm
18.4cm
12.7cm
12.7cm
12.7cm
Z-10601
Foam Positioner finger block
27°
22.8cm
25.4cm
Foam Positioner Wedge
Bolster Myelogram
27 angle degree Foam
Positioner Wedge
5cm
17.78cm
17.8cm
40.6cm
Z-10309-B
www.cdrsys.ca
·
info@cdrsys.ca
Foam Positioner Wedge Bolster
Myelogram (for specifics see
Z-10309) with attached base
and integrated handles
·
403.850.7035
15.2cm
30.5cm
Z-10106*
Z-10401
Foam Positioner Torso Block
Foam Positioner circle
15.2cm
35.5cm
40.6cm
Multi pack of wedges Includes: Foam Positioner 35/55 angle degree.
Foam Positioner 45 angle degree. Foam Positioner 15 angle degree. Foam
Positioner 20 angle degree. Foam Positioner rectangle and foam circle .
65/45 angle degree Foam
Wedge Positioner
59cm
15.2cm
Z-10701
Z-10301
3.8cm
28cm
Foam Positioner rectangle
22.8cm
53.3cm
45.7cm
Z-10309
Z-10203
45°
31.7cm
12.7cm
16.5cm
Z-10105*
54
15 angle degree Foam
Positioner Wedge
Foam Positioner chest
65°
35/55 angle degree Foam
Positioner Wedge
15.2cm
15°
17.8cm
Z-10103*
Z-10402
7.6cm
Foam Positioner finger block
Polyurethane Coated
28cm
15°
28cm
61cm
Z-10601A
7.6cm
61cm
35.5cm
39.3cm
· 1.855.856.7035
40.6cm
35.5cm
Z-10704
Z-10704A
Foam Positioner leg immobilizer
Foam Positioner leg immobilizer
Polyurethane Coated
Z-10040201
Large gel donut-style head support
Z-10040202
Small gel donut-style head support
www.cdrsys.ca
·
info@cdrsys.ca
·
403.850.7035
· 1.855.856.7035
55
ACCESSORIES
61cm
Z-10102*
65°
17cm
10cm
45°
17.8cm
7.6cm
5cm
31.7cm
55°
17.8cm
18.4cm
Your Label Here
www.cdrsys.ca CDR Systems Inc.
56
info@cdrsys.ca
|
+1.855.856.7035 #33, 235105 Wrangler Drive
|
Local +403.850.7035
Calgary, Alberta
www.cdrsys.ca
|
·
T1X 0K3
info@cdrsys.ca
·
403.850.7035
·
V-1603-6
1.855.856.7035
Download