EDGE EX1HE
E V O L U T I O N
LED Direct Linear /
High Efficiency Lens
Project Name
Date
Catalog Number
Type
CONSTRUCTION 6063-T5 Extruded aluminum housing. Highly reflective die-formed white painted aluminum reflector,
.125” diffuse snap-in acrylic lens with matte finish, removable for maintenance.
3-1/2”
3-1/2”
3-1/2”
36V output. 0-10 volt dimming standard. Must specify 1D (88.9mm)
in circuiting
(88.9mm) ELECTRICAL Electronic, 120 to 277 volt input and
(88.9mm)
for dimming.
LED All luminaire configurations tested in accordance with IES LM-79. Diodes tested in accordance with IES LM-80.
R9≥20, 27K is CRI≥90, 30K, 35K, and 40K is CRI≥82. Minimum lifetime greater than 60,000.
MOUNTING Aircraft cable, surface and wall. Select the straight aircraft cable that mounts on 4’-0” and 8’-0” centers.
Aircraft
Cable supplied with 5” power and 2” non-power
canopies. Refer to installation instructions for appropriate
1-1/2”
(38.1mm)
1-1/2” (38.1mm)
1-1/2”
ceiling detail.
Canopies are painted white unlessNF:
otherwise
specified.
End trims and SJT cord attached at factory.
Fac- (38.1mm)
G9: 2-5/16”
(58.7mm)
1-15/16”
(48.5mm)
SF: 3-1/2” (88.5m
tory drawings required with all EX1 projects.
G1/ FL: 2-9/16” (65.8mm)
FINISH Standard powder-coat textured white, metallic silver, textured black, graphite or bronze painted finish. Consult
factory for chip of standard paint finishes. Pendants and canopies painted white unless specified differently in the
options section of the part number. Contact factory for additional custom color and finish options.
WARRANTY Edge Evolution LED offered with a 5-year limited warranty. Covers LED, driver and fixture.
Recessed
EV1_HE
LABELS UL and cUL Listed, approved for dry/damp location unless otherwise noted.
uspended
YEAR
WARRANTY
ectional housing)
MR16
YEAR
WARRANTY
3-9/16”
(90.8mm)
Daylight
Sensor
LFL
Convertible
Corners
LED
LED
LFL
Convertible
Convertible
LFL
LED
3-9/16”
(90.8mm)
LED
Convertible
LFL
1-1/2” (38.1mm)
1-3/4” (44.5mm)
1-1/2” (38.1mm)
1-3/4” (44.5mm)
L U M I N A I R E S PEX1B_HE/HE
E C I F I C AT I O N
EX1-
__-
N-
____-
HOUSING DIRECT INDIRECT
uspended
EX1Edge EX 1
COLOR/LUMENS
1-3/4” (44.5mm)
Sample Catalog #: EX1-HE-N-40HO-16-AC48G1-120-1C-W
__’- ______- ___YEAR
WARRANTY
LENGTH
VOLTAGE
MOUNTING1-1/2”
(38.1mm)
LFL
Convertible
LED
N- None,
Closed
Individual Units
2-5/16”
2- 2’ (609.6mm)
(58.7mm)
3- 3’ (914.4mm)
short housing)
HE- High Efficiency Lens
Staggered
BW- High Efficiency
Lens
Lamps
with Batwing Insert
WA- High Efficiency Lens
with Asymmetric EX12_HE
remote
Insert
Staggered
Installation
Instructions
EX1_HE
Lamps
4- 4’ (1219.2mm)
5- 5’ (1524mm)
1-1/2”
6- 6’(38.1mm)
(1828.8mm)
7- 7’ (2133.6mm)
8- 8’ (2438.4mm)
Continuous Runs
xx’- Specify nominal
overall row length
in 1’ (304.8mm)
increments
27K Color Temperature Lumen Options
2727K, Standard Output
27HO- 27K, High Output
30K Color
Temperature
Lumen Options
Year
LED
Warranty
3030K, Standard Output
30HO- 30K, High Output
35K Color Temperature Lumen Options
LED
35- LFL 35K, Standard Output
Convertible
Convertible
35HO- 35K, LED
High Output
LFL
40K Color Temperature Lumen Options
4040K, Standard Output
40HO- 40K, High Output
Custom Output1
CL_____- Specify color temp. and lumens/ft. (i.e. CL35600)
CW____- Specify color temp. and wattage/ft. (i.e. CW407.5)
LED
__-
__-
___
CIRCUITING
FINISH
120 V
277 V
UNV
(120-277)
WSBLBR
GRCC-
OPTIONS 1-1/2” (38.1
Convertible
LFL
Single Aircraft Cable2,7
120AC48G1- 1” T-Bar3 2-5/16”
2773 (58.7mm)
AC48G9- 9/16” T-Bar
UNVAC48GS- Slotted T-Bar3
AC48JB- Junction Box
1-3/4” (44.5mm)
AC48ST- Structure
AC5__G_- 5” (127mm) Non-Power Canopy4
5” (127mm) Non-Power Canopy4
AC5__JBEX12_N/HE
SQ48G_- 5” (127mm) Square Canopy4
SQ48JB- 5” (127mm) Square Canopy4
Surface Mount7
WAWall Mount
SSurface Mount
(Ceiling)
1C1D1B1E-
Matte White
Metallic Silver
Textured Black
Bronze
Graphite
Custom Color
2-5/16”
(58.7mm)
1-3/4” (44.
EX12_N/BW
CC-CCLCTCX-
Custom Color Canopy6
90° Corner
T Intersection
X Intersection
Single Circuit
Single Circuit Dimming5
Single Circuit Battery5
Single Circuit with
Emergency Circuit5
1
Specify lumens/watts between standard offering listed above. Lumens are specified per color temp. 2Standard 48” adjustable aircraft cable. Consult factory for additional lengths. Single Aircraft Cable
mounts 4’ and 8’ on center. Mount locations are not adjustable. 3Consult factory for tegular edged tiles. 4Replaces standard 2” non-power canopy. 5Some Edge configurations will not accommodate all
electrical options. Consult factory. 6If canopy is to match fixture housing, must specify in options section with CC-C. If not specified canopy will be standard matte white. 7End trims and SJT attached at the
factory. Factory drawings required with all projects.
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568
www.pinnacle-ltg.com
© 2016 Pinnacle Architectural Lighting®
April 2016
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.