MEDmobility
Ranger Express with
Precision Seat
5711- Calgary Trail NW
Edmonton AB T6H 2K1
P: 780-437-3300
F: 780-430-9381
www.medmobility.ca
Suggested Canadian Price List
Order Form Effective March 31st, 2014
Phone: 604-590-4310 Fax: 604-590-4337 Toll Free: 1-888-745-7888
www.rangerwheelchairs.com
Company:___________________________________________________ Sales Rep:_________________________________________________
Date:______________________________ PO #:________________________________ Client:______________________________________
Ship to:_______________________________________________________________________________________________________________
Express Rear-Wheel Drive Power Base
.............................................................................. $7495
Standard Rehab Seat and Heavy
Duty Rehab Seat available on
separate order form.
» For use with Precision Seating System. Standard Express Base comes w/ High-Torque 500W motors. Base
width is 25.5" with GR24 Batteries. Weight capacity is 400 lbs.
Express Compact Rear-Wheel Drive Power Base
.............................................................................. $7495
» For use with Precision Seating System. Compact version comes w/ High-Speed 450W motors. Base width is
23.5" with GR22 Batteries. Weight capacity is 300 lbs.
SEAT SELECTION AND OPTIONS:
Precision Seat ........................................................................................................$1065
» The Ranger made-to-order Precision Seat is required for power Low-Shear Stand-Up and Low-Shear Recline. Growable by 2" in width with 6" depth
adjustment.
Specify Precision Seat Size (14" - 22" Width & Depth) Width: _______" x De pth: _______" and back he ight _______"
Armre st Type
» All armrests are Bolt-on w/ depth-adjustable mounts.
ARIN
Infinity Height/Angle Adjustable, Flip-Up Armrests (Height Range: 9.5" - 12") - Only available with Full Length Arm Pads.
ARRM
Rear Mounted Flip-Up Armrests (Height Range: 9.5" - 13") - Required with Stander
$319
$319
ARHD
Heavy Duty Flip-Up Armrests (Height Range: 9.5" - 13")
$415
ARCH
Custom Height Range: _______________ - Provide measurement on Seating Chart (Pg 4)
$185
Armpad Le ngth
» Full Length Armpads are required with Infinity Armrests unless factory is contacted.
APLF
Left Armpad - Full Length
STD
APLD
Left Armpad - Desk Length
NC
APRF
Right Armpad - Full Length
STD
APRD
Right Armpad - Desk Length
NC
Footre st Hange rs
» Please record Footplate/Footboard to Seat Pan distance
FR70
70° Swing Away Footrest Hangers
$289
FR60
60° Swing Away Footrest Hangers
$345
FR7T
70° Tapered Swing Away Footrest Hangers - Reduces width by 4". Requires Angle Adjustable Footplates.
$345
FREL
Intelligent Elevating Leg Rests (Swing-Away w/ Pivot & Padded Hi-Point Knee Bolsters
$695
FRCM
Centre Mounted Foot Board - Required with Stander
$405
FPSP
Footplate / Footboard to Seat Pan Measurement:______" (Required)
FRCH
Custom Height Footrests - Les s than 11" or greater than 19"
REQUIRED
$185
Footplate s
» Requires Footrest Hangers (Selected Above). No selection required if picking FRCM Centre Mounted Footboard.
FPST
Standard Composite Footplates w/ Heel Loops
STD
FPAA
Angle Adjustable Footplates w/ Heel Loops
$199
FPHD
Heavy Duty Angle Adjustable Footplates w/ Heel Loops
$399
FPOH
Omit Heel Loops (Must choose one above option)
FPCP
Add Calf Pads - Not automatically included w/ Footboard or Tilt.
NC
$265
Custom Se ating Options
» More Custom Options are possible than are listed below. Please contact the factory for a quote on any custom-made component or accessory you
require.
CLAR
Custom Locking System for Flip Up Arms
$135
CSAM
Custom Set Up for Positioning Armrests (ie. Otto Bock Channels)
$115
BASE OPTIONS:
Base :
FR24
Standard Frame to Fit GR24 Batteries
FR24
Reduced Frame to Fit GR22 Batteries - GR22 Battery Tray & reduced width to 24.5" available on reques t. Please contact factory.
STD
FREW
Extended, Wide Platform - Required for seat depths > 20". Increases stability and handling.
QUOTE
$400
Batte rie s
» Batteries are MK Gel Cell type
GR24
GR24 Batteries Installed at Factory
$665
GR22
GR22 Batteries Installed at Factory
$530
Driv e Whe e ls
Caste r Whe e ls
133P
13" x 3" with Pneumatic Tires
STD
922P
9” X 2 ½” with Pneumatic Tires
STD
133F
13" x 3" with Foam Tires
$175
922F
9” X 2 ½” with Foam Filled Tires
$175
ELECTRONICS AND CONTROL OPTIONS:
Controlle r:
VR2C
RNET
VR2 Joystick and 70A Controller w/ 2 Actuator Controls
STD
R-net System w/ 80A Controller - Select Joystick/alternative drive
$825
controls separately. Required for use w/ Omni. May require ISM
PACU
Proportional Attendant Control (for VR2)
$1095
PACR
Proportional Attendant Control (for R-net)
$1195
CONTROL SYSTEM S BY PG DRIVES TECHNOLOGY
VR2 Systems is single profile w/ 5 speeds or 5 profiles and
controls up to 2 individual seat functions. R-net is up to 7
profiles w/ speed control, fully expandable for alternative
drive controls etc. and controls up to 6 seat function w/ ISM.
R-net w/ ISM is recommended for controlling multiple seating
functions through the joystick.
Joysticks and Alte rnativ e Controls:
» Options below require R-net System Upgrade.
RNJS
R-net Colour LCD Joystick - Included w/ selection of R-net Sys tem
RNLU R-net Colour LCD Joystick w/ Lighting Controls
RNST R-net Colour LCD Joystick w/ Speed Pot and Toggle Switches
ISM (Multi-Actuator Seating Module) for R-NET System - Required for joystick
ISMM
control of actuators w/ R-net
OMNJ R-NET Omni Display Alternative Drive Control Module (No Joystick)
R-NET Omni Display Alternative Drive Control Module (Includes RNJS) OMWJ
Joys tick upcharges apply
NC
A NOTE ON ALTERNATIVE DRIVE CONTROLS
$50
Most Alternative Drive Controls such as Sip-N-Puff,
Head Array, Chin Control and Switch Drives are
Plug-and-Play with the R-NET Omni using a
standard 9-Pin connector. To source your
Alternative Drive Control System through Ranger
please order an Omni and contact the Ranger
Factory for a quote on the specific System and
components you require.
$125
$385
$645
$1295
Joystick M ounting Options
» Please record distance from Back Cane (front) to Joystick Toggle (centre)
JMQL
Enclosed Quadlink Joystick Mount.
JMQC
Custom Position for Quadlink. Specify Position in Notes Section (ie. "2 inches inside armrest pad")
JMSP
Single Pivot Swing Away Mount. Old Style Mount - Heavy Duty.
JMCM
Custom Joystick Mounting System. (ie. Retractable, Centre Mounted Swing Away, etc)
BAJS
Front of Back Cane to Joystick Toggle(centre) Measurement:_______"
Left Side
Right Side - Hardware now interchangeable to both s ides !
Left Side
Right Side
STD
$185
$385
Quote
REQUIRED
Se at-To-Floor He ight
» 18.75" is lowest standard seat height for Multiple Power Functions. Some exceptions apply (see Tilt Options). Contact Factory for custom low heights.
STFM
Standard Seat to Floor Height - 18.75" (lowest possible)
STFC
Custom Seat to Floor Height: _____________ (Low, Custom Angle, etc.)
STD
Quote
POWER SEATING OPTIONS:
» More Custom Power Seating Functions are available than listed below. Please contact Factory for quote on any additional custom seating applications.
First choose a Primary Pre cision Re hab Se ating Syste m:
PSUS
Power Low Shear Stand-Up System - Includes s wing-away padded knee-blocks and flat pan back
$7665
LSPR
Low Shear Power Recline System - Comes with flat pan back
$3885
PAFB
Power Articulating Footboard System
$3195
Se le ct any Additional Se ating Functions to be include d in your Syste m:
PS01
Add Low Shear Recline to Stand-Up System
$2650
PS02
Independent Hi-Point Power Elevating Legrest w/ Knee Bolster - May require 19" Seat Height
$3450
PS03
Add Single-Pivot Tilt to Low Shear Recline or Articulating Footboard Systems
$2450
PS04
Add Power Articulating Footboard to Stand-Up or Low Shear Recline System
$2995
PS05
Add Joint Action, Hi-Point Elevating Legrests to Low-Shear Recline System
$2250
PS06
Add Independent, Hi-Point Elevating Legrests to Low-Shear Recline System
$2995
PS07
Add Standard Recline System (90° to 170°) to Articulating Footboard System
$2450
PS08
Add Posterior/Anterior Tilt w/ 6" Elevation to Low Shear Recline or Articulating Footboard System
$7295
Toggle Switch Options:
» Select one of the following for Power Seating Options not controlled through the joystick. Price is PER SWITCH. Toggles remain active when system
power is off.
CMTS
Clamp-Mounted Single Power Seating Toggle Switch
AMTS
Armrest-Mounted Single Power Seating Toggle Switch
Left Side
$255 x ____
Right Side
Left Side
$255 x ____
Right Side
ADDITIONAL OPTIONS:
Custom Acce ssorie s
CARC
Rear Cane Holder
Left Side
Right Side
$89
CACH
Cup Holder
Left Side
Right Side
$89
CAUH
Umbrella Holder
Left Side
Right Side
$89
CAQH
Quad Cane Holder
Left Side
Right Side
$189
CACB
Rear Seat Mounted Carry Bag
$89
Additional Function Options:
HLTL
Head-light and Tail-light Package (Switch Controlled) - Specify switch box mounting position in Notes Section
$349
RNLP
R-net Light Package (Requires R-net Lighting Upgrade and ISM)
$349
ADCP
Additional Charging Port – Mounted on Frame - Specify mounting point in Notes Section
$349
12VO
12V Outlet for Cellular Phone w/ Mounting Box - Specify mounting point in Notes Section
$379
110V
110 Volt Inverter for AC Power - Specify purpose in Notes Section
$495
Colour Options
CLSV
Silver
CLJB
Jet Black
CLRD
Fire Engine Red
$215
CLDB
Deep Burgundy
$215
CLDB
Dark Blue
$215
CLLB
Bright Blue
$215
CLFG
Forest Green
$215
CLVY
Viper Yellow
CLCS
NC
NC
$215
Custom Colour:_____________
$395
BACKREST AND CUSHION OPTIONS:
» Seating is not mounted to backrest. Consult factory for backrest mounting options.
Backre sts:
Se at Cushions:
RSBP
Ranger Standard Pad for Solid Pan Back
$265
FMPI
Prism Ideal Cushion
$200
FMPB
Prism Basic Back
$575
FMPE
Prism Elite Cushion
$290
FMPU
Prism Ultra Back
$690
FMPS
Prism Supreme Cushion (20 x 16 N/A)
FMPA
Prism Air Back
$750
16 x 16
16 x 18
FMPT
Prism TrueFitt Back (16" Tall Only)
$865
20 x 16
20 x 18 (Required When Ordering Seating)
16 x 16
16 x 20
18 x 16
18 x 20
20 x 16
20 x 20 (Required When Ordering Backrest)
18 x 16
18 x 18
$430
SEATING AND MEASUREMENT CHART:
» Please Complete chart to ensure proper fit
M e asure me nts:
WGHT
Approximate User Weight - REQUIRED
PFSP
Footplate/Footboard to Seat Pan Measurement - REQUIRED
BAJS
Front of Back Cane to Centre of Joystick Toggle - REQUIRED
HHSP
Head Height from Seat Pan - Required for Custom Back Cane Height
ARSP
Armrest Height from Seat Pan - Required for Custom Armrest Height
BRAN
Backrest Angle from Seat Pan - Required for Custom Back Cane Angle
CFBD
Custom Footboard Dimensions - Required for Custom Footboard
ACLW
Actual Client Chest Lateral Width - For Reference Only. Does not impact Rehab Seat dimensions
ACLD
Actual Client Chest Lateral Depth - For Reference Only. Does not impact Rehab Seat dimensions
ACSW
Actual Client Seat Width - For Reference Only. Does not impact Rehab Seat dimensions
ACSD
Actual Client Seat Depth - For Reference Only. Does not impact Rehab Seat dimensions
NOTES: