REFERENCES
A. Single-Phase PFC
[1]
R. W. Erickson and D. Maksimovic, Fundamentals of Power Electronics, 2nd
ed., Kluwer Academic Publishers, Norwell Massachusetts, 2001.1001
[2]
N. Mohan, T. M. Undeland and W. P. Robbins, Power Electronics Converters,
Applications and Design, 3rd ed., New York, John Wiley & Sons, Inc., 2003.
[3]
IEC 1000-3-2, International Standard, Part 3: Limits-Section 2: Limit for
harmonic current emission (equipment input current ≤ 16A per phase), 1995.
[4]
L. Moran, P. Werlinger, J. Dixon and R. Wallace, “ A Series active power filter
which compensates current harmonics and voltage unbalance simultaneously,”
Proc. IEEE PESC ’95, 1995, pp. 222-227.
[5]
L. Malesani, L. Rossetto and P. Tenti, “Active power filter with hybrid energy
storage,” IEEE Trans. Power Electron., vol. 6, pp. 392-397, 1991.
[6]
M. V. Ataide and J. A. Pomilio, “Single-phase shunt active filter: a design
procedure considering harmonics and EMI standards,” Proc. IEEE ISIE ’97,
1997, vol. 2, pp. 422-427.
[7]
H. Fujita and H. Akagi, “The unified power quality condition: the integration of
series-and shunt-active filter,” IEEE Trans. Power Electron., vol. 13,
pp.315-322, 1998.
[8]
D. H. Chen and S. J. Xie, “Review of the control strategies applied to active
power filters,” in Proc. IEEE DRPT’04, vol. 2, pp. 666-670, 2004.
B. Switch-mode rectifiers
[9]
A. Kandianis and S. N. Manisa, “A comparative evaluation of single-phase
SMR converters with active power factor correction,” in Proc. IEEE IECON’94,
pp. 244-249, 1994.
109
[10] J. Sebastian, M. Jaureguizar and M. Uceda, “An overview of power factor
correction in single-phase off-line power supply systems,” in Proc. IEEE
IECON’94, pp. 1688-1693, 1994.
[11] W. Huai and I. Batarseh, “Comparison of basic converter topologies for power
factor correction,” in Proc. IEEE Southeastcon’98, pp. 348-353, 1998.
[12] B. Singh, B. N. Singh, A. Chandra, K. AL-Haddada, A. Pandey and D. P.
Kothar. “A review of single-phase improved power quality AC-DC converters,”
IEEE Trans. Ind. Electron., vol. 50, pp. 962-981, 2003.
[13] O. Garcia, J. A. Cobos, R. Prieto, P. Alou and J. Uceda, “Single phase power
factor correction: a survey,” IEEE Trans. Power Electron., vol. 18, pp. 749-755,
2003.
[14] M. S. Dawande ans G. K. Dubey, “Single phase switch mode rectifiers,” IEEE
PEDS’96, pp. 637-543, 1996.
[15] M. H. L. Chow, C. K. Tse and Y. S. Lee, “An efficient PFC voltage regulator
with reduced redundant power processing,” in Proc. IEEE APEC’00, vol. 1, pp.
87-92, 1999.
[16] T. Yoshida, O. Shizuka, O. Miyashita and K Ohniwa, “An improvement
technique for the efficiency of high-frequency switch-mode rectifiers,” IEEE
Trans. Power Electron., vol. 15, pp. 1118-1123, 2000.
[17] C. M. Liaw, T. H. Chen and W. L. Lin, “Dynamic modeling and control of a step
up/down switching-mode rectifier,” Proc. IEE, vol. 146, pp. 317-324, 1999.
[18] K. Taniguchi, N. Kimura, Y. Takeda, S. Morimoto and M. Sanada, “A Novel
PAM Inverter for Induction Motor Drive,” Proc. Power Electronics and Drive
Systems, vol. 1, pp. 129-134, 1995.
[19] B. Singh, B. P. Singh and M. Kumar, “PFC converter fed PMBLDC motor drive
for air conditioning.” IE(I) Journal-EL, vol. 84, pp. 22-27, June 2003.
[20] H. Endo, T. Yamashita and T. Sugiura, “A high power-factor buck converter,”
Proc. IEEE PESC’92, 1992, pp. 1071-1076.
[21] G.. Spiazzi, “Analysis of Buck Converters Used as Power Factor Preregulators,”
Proc. IEEE PESC’97, 1997, pp. 564-570.
110
[22] J. Cardesin, J. Sebastian, P. Villegas, M. Hernando and A. Fernandez, “Average
small-signal model of buck converter used as power factor preregulator,” Proc.
Industry Applications Conference, 2002, vol. 3, pp.2147-2151.
[23] Q. Zhao, F. Tao, P. Xu, J. Wei and F. C. Lee, “Improving performance of
continuous current mode boost converters for power factor correction,” Proc.
IEEE PESC’01, 2001, pp. 624-647.
[24] T. Iida, G. Majumdar, H. Mori and H. Iwamoto, “Constant output voltage
control method for buck-boost type switched mode rectifier with fixed
switching pulse pattern,” Proc. IEEE ICIT ’96, 1996, pp. 266-268.
[25] K. Matsui, I. Yamamoto, T. Kishi, M. Hasegawa, H. Mori and F. Ueda, “A
comparison of various buck-boost converters and their application to PFC,”
Proc. IEEE IECON ’02, 2002, vol. 1, pp. 30-36.
[26] J. Chen, D. Maksimovic and R. Erickson, “A new low-stress buck-boost
converter for universal-input PPC applications,” Proc. IEEE APEC ’01, 2001,
vol. 1, pp.343-349.
[27] J. Chen, D. Maksimovic and R. Erickson, “Buck-boost PWM converters having
two independently controlled switches,” Proc. IEEE PESC ’01, 2001, vol. 2, pp.
736-741.
[28] A. R. Prasad, P. D. Ziogas and S. Manias, “A new active power factor correction
method for single-phase buck-boost ac-dc converter,” Proc. IEEE APEC ’92,
1992, pp. 841-820.
[29] Y. Nishida, S. Motegi and A. Maeda, “A single-phase buck-boost AC-to-DC
converter with high-quality input and output waveforms,” Proc. IEEE ISIE ’95,
1995, vol. 1, pp. 433-438.
[30] O. Lopez, L. Garcia de Vicuna, M. Castilla, J. Matas and M. Lopez,
“Sliding-mode-control design of a high-power-factor buck-boost rectifier,”
IEEE Trans. Ind. Electron., vol. 46, pp. 604-612, 1999.
[31] B. S. Lee and R. Krishnan, “A variable voltage converter topology for
permanent-magnet brushless DC motor drives using buck-boost front-end power
stage,” Proc. IEEE ISIE ’99, 1999, vol. 2, pp. 689-694.
111
[32] W. Guo and P. K. Jain, “A power-factor-corrected AC-AC inverter topology
using a unified controller for high-frequency power distribution architecture,”
IEEE Trans. Ind. Electron., vol. 51, pp. 874-883, 2004.
[33] L. Brush, “Distributed power architecture demand characteristics,” Proc. IEEE
APEC ’04, 2004, vol. 1, pp. 342-345.
[34] P. Lindman, “Powering tomorrow’s data internetworking system,” Proc. IEEE
INTELEC ’00, 2000, pp.506-511.
[35] L. C. G. de Freitas, E. E. A. Coelho, J. B. Vierira Jr., M. G. Simoes and L. C. de
Freitas, “A single-stage PFC converter applied as an electronic ballast for
fluorescent lamps,” Proc. IEEE APEC ’04, 2004, vol. 1, pp. 164-169.
[36] M. Ponce, A. J. Martinez, J. Correa and J. Arau, “Evaluation of an improved
input current shaper used as power factor corrector in electronic ballast,” in
Proc. IEEE ISCAS’02, vol. 4, pp. 349-352, 2002.
[37] P. Cheesman, “Why IBAs Work Beter For You,” C&D Technologies, Inc.
www.nuhorizons.com/FeaturedProducts/Volume3/articles/C&DTech_Article.pdf
[38] M. Brkovic and S. Ćuk, “Input current shaper using Ćuk converter,” IEEE
INTELEC, Oct.1992, pp. 532-593.
[39] H. Y. Kanaan, and K. Al-Haddad, “A comparative analysis of nonlinear current
control schemes applied to a SEPIC power factor corrector,” Proc, IEEE
IECON, 2005, pp. 1104-1109.
[40] H. Wei and I. Batarseh, “Comparison of basic converter topologies for power
factor correction,” Proc. IEEE Southeastcon’98, pp. 348-353, 1998.
C. Flyback SMRs
[41] R. Erickson and M. Madigan, “Design of a simple high-power-factor rectifier
based on the flyback converter,” Proc. IEEE APEC, 1990, pp. 792-801.
[42] W. Tang, Y. H. Jiang, G.C. Verghese and F.C Lee, “Power factor correction with
flyback converter employing charge control,” Proc. IEEE APEC, 1993, pp.
293-298.
112
[43] N. Backman and T. Wolpert, “Simplified single stage PFC including peak
current mode control in a flyback converter,” in Telecommunications Energy
Conference, pp.317-324, 2000.
[44] J. Sebastian, A. Fernandez, P. Villegas, J. A. Martinez and E. de la Cruz, “A
New Low-Cost control technique for power factor correctors operating in
continuous conduction mode,” Proc. IEEE PESC’02, pp. 1132-1136, 2002.
[45] T. Tanitteerapan and S. Mori, “An input current shaping technique for PFC
flyback rectifier by using inductor voltage detection control method,” in
Electrical and Electronic Technology, vol. 2, pp. 799-803, 2001.
[46] C. Adragna, “Design equations of high-power-factor flyback converter based on
the L6561,” AN1059 STMicroelectronics.
[47] D. Dalal and O. Meilhon, “A single stage PFC+PWM converter for 75-150W
distributed power system,” ON Semiconductor, USA.
[48] P. N. Papanikolaou, C. E. Tatakis, A. C. Kyritsis, “Design of PFC AC/DC
flyback converter for low voltage applications,” Proc. European Power
Electronics and Applications, 2005, pp.1-10 .
[49] D. Dah-Chuan Lu, D. Ki-Wai Cheng and Yim-Shu Lee, “Single-switch flyback
power-factor-corrected ac/dc converter with loosely regulated intermediate
storage capacitor voltage,” Proc. IEEE Circuits and Systems, 2003, pp. 264-267.
[50] J. J. Zheng, A. Shteynberg, D. Zhou and J. McCreary, “A novel multimode
digital control approach for single-stage flyback power supplies with power
factor correction and fast output voltage regulation,” Proc. IEEE APEC’05,
2005, pp. 830-836.
[51] J. Jovalusky, “Low-cost energy-efficient SMPS delivers up to 90W peak from
an EE-25 core transformer,” Proc. IEEE APEC, 2006, pp. 254-260.
[52] Y. Zheng and G. Moschopoulos, “Design considerations for a new AC-DC
single stage flyback converter,” Proc. IEEE APEC’06, 2006, pp. 400-406.
[53] S. K. Mishra, B. G. Fernandes and K. Chatterjee, “Single stage single switch
AC/DC converters with high input power factor and tight output voltage
regulation,” Proc. IECON, 2004, pp. 2690-2695.
113
[54] B. Prakash and S. Parakash, “Analysis of high DC bus voltage stress in the
design of single stage single switch switching mode rectifier,” Proc. IEEE ISIE,
2005, pp. 505-511.
[55] D. S. Beyragh, S. M. Sayedi and H. R. Karshenas, “A novel digital voltage
controller for single-phase PFC rectifiers,” Proc. IEEE CCECE/CCGEI, 2006,
pp. 887-890.
[56] W. Qiu, W. Wu, S. Luo, P. Kornetzky and I. Batarseh, “Practical design
considerations of a single-stage single-switch parallel PFC converter for
universal voltage applications,” Proc. Industry Applications Conference, 2002,
vol. 3, pp. 2133-2140.
[57] C. Qiao and K. M. Smedley, “A topology survey of single-stage power factor
corrector with a boost type input-current-shaper,” IEEE Trans. Power
Electron.,vol. 16 no. 3, pp. 360-368, 2001.
[58] N. P. Papanikolaou and E.C. Tatakis, “Minimisation of power losses in PFC
flyback converters operating in the continuous conduction mode,” Proc.
IEE-Electr. Power Appl., July 2002, vol. 149, no. 4, pp.283-291.
[59] C. Larouci, J. P. Ferrieux, L. Gerbaud, J. Roudet and J. Barbaroux, “Control of a
flyback converter in power factor correction mode: Compromize between the
current constraints and the transformer volume,” Proc. IEEE APEC, 2002, pp.
722-727.
[60] J. Hoyo, J. Arau, C. Aguilar and E. Martinez, “Flyback-based PFC converter
with sinusoidal output for use in AC UPS,” Proc. IEEE CIEP, Oct. 2002, pp.
177 - 181.
[61] E. J. Rikos, E.C. Tatakis, “Single-stage single-switch isolated PFC converter
with non-dissipative clamping,” Proc. IEE-Electr. Power Appl., March 2005,
vol. 152, no. 2, pp. 166 – 174.
D. Component Rating Assessment
[62] R. Redl and L. Balogh, “RMS, DC, peak, and harmonic currents in
high-frequency power-factor correctors with capacitive energy storage,” in Proc.
IEEE APEC’92, pp. 533-540, 1992..
114
[63] J. J. Spangler and A. K. Behera, “A comparison between hysteretic and fixed
frequency boost converters used for power factor correction,” in Proc. IEEE
APEC ’93, PP.281-286, 1993.
[64] J.S. Lai and D. Chen, “Design consideration for power factor correction boost
converter operating at the boundary of continuous conduction mode and
discontinuous mode,” in Proc. IEEE APEC ’93, pp. 267-273, 1993.
E. Dynamic control
[65] E. Rodriguez, O. Garcia, J. A. Cobos, J. Arau and J. Uceda, “A single-stage
rectifier with PFC and fast regulation of output voltage,” in Proc. IEEE
CIEP ’98, pp. 30-36, 1998.
[66] D. S. L. Simonetti, J. Sebastian and J. Uceda, “A small-single model for SEPIC,
Ćuk and flyback converters as power factor preregulators in discontinuous
conduction mode,” in Proc. IEEE PESC ’93. pp. 735-741, 1993.
[67] M. C. Ghanem, K. Al-Haddad and G. Roy, “A new control strategy to achieve
sinusoidal line current in a cascade buck-boost converter,” IEEE Trans. Ind.
Electron., vol. 1,pp. 350-356, 2001.
[68] G.. K. Andersen and F. Blaabjerg, “Current programmed control of a single
phase two-switch buck-boost power factor correction circuit,” in Proc. IEEE
APEC ’01, PP. 350-356, 2001.
[69] B. Raymond and J. Sepe, “A unified approach to hysteretic and
ramp-comparison current controllers,” in Conf. Rec. IEEE-IAS Annu. Meeting,
pp. 724-731, 1993.
[70] C. A. Canesin and I. Barbi, “Analysis and design of constant-frequency
peak-current-controlled high-power-factor boost rectifier with slope
compensation,” in Proc. IEEE APEC ’96, pp. 807-813, 1996.
[71] T. Takeshita, Y. Toyada and N. Matsui, “Harmonic suppression and DC voltage
control of single-phase PFC converter,” in Proc. IEEE PESC ’00, vol. 2, pp.
571-576, 2000.
115
[72] N .Bhiwapurkar, M. Rathi and N. Mohan, “Power factor correction circuit for
faster dynamics zero steady state error using dual voltage controllers,” in Proc.
IEEE IECON ’02, vol. 1,pp. 204-208, 2002.
[73] J. Luo, M. K. Jeoh, and H. C. Huang, “A new continuous conduction mode PFC
IC with average current mode control,” in Proc. PEDS ’03, vol. 2,
pp.1110-1114, 2003.
[74] M. O. Eissa, S. B. Leeb, G. C. Verghese and A. M. Stankovic, “A fast analog
controller for a unity-power factor AC/DC converter,” in Proc. IEEE APEC ’94,
vol. 2, pp. 551-555, 1994.
[75] O. Lopez, L. G. de Vicuna and M. Castilla, “Sliding mode control design of a
boost high-power-factor pre-regulator based on the quasi-steady-state
approach,” in Proc. IEEE PESC ’01, vol. 2, pp. 932-935, 2001.
[76] L. Rossetto, G. Spiazzi, P. Tenti, B. Fabiano and C. Licitra, “Fast-response
high-quality rectifier with sliding mode control,” IEEE Trans. Power Electron.,
vol. 9, pp. 146-152, 1994.
[77] G. Zhu, H. Wei, P. Kornetzky and I. Batarseh, “Small-signal modeling of a
single-switch AC/DC power-factor-correction circuit,” IEEE Trans. Power
Electron., vol. 14, pp. 1142-1148, 1999.
[78] P. Mattavelli, G. Spiazzi and P. Tenti, “Predictive digital control of power factor
preregulators with input voltage estimation using disturbance observers,” IEEE
Trans. Power Electron., vol. 20, pp. 140-147, 2005.
[79] W. Zhang, G. Feng, Y.-F Liu and B. Wu, “DSP implementation of predictive
control strategy for power factor correction (PFC),” in Proc. IEEE APEC ’04,
vol. 1, pp. 67-73, 2004.
[80] D. M. Van de Sype, Koen De Gusseme, A. P. M. Van den Bossche and J. A.
Melkbeek, “Duty-ratio feedforward for digitally controlled boost PFC
converters,” IEEE Trans. Ind. Electron., vol. 52, pp. 108-115, 2005.
[81] H. C. Chen, S. H. Li and C. M. Liaw, “Switch-mode rectifier with digital robust
compensation and current waveform controls,” IEEE Trans. Ind. Electron., vol.
19, pp. 560-566, 2004.
116
[82] A. Kaletsanos, F. Xepapas, S. Xepapas and S. N. Manias, “Nonlinear control
technique for three-phase boost AC/DC power converter,” in Proc. IEEE
PESC ’03, vol. 3, pp. 1080-1085, 2003.
F. Nonlinear behavior
[83] M. Orabi and T. Ninomiya, “Nonlinear dynamics of power-factor-correction
converter,” IEEE Trans. Ind. Electron., vol. 50, pp. 1116-1125, 2003.
[84] C. K. Tse and M. Di Bernardo, “Complex behavior in switching power
converters,” in Proc. IEEE, vol.90, pp. 768-781, 2002.
[85] H. Ren, C. Jin, T. Ninomiya and, J. Chunfeng, “Novel developments in the
study of the fast-and slow-scale instabilities of a DC-DC converters,” IEEE
ISCAS ’05, PP. 2827-2830, 2005.
[86] M. Orabi, T. Ninomiya and J. Chunfeng, “Novel developments in the study of
nonlinear phenomena in power factor correction circuits,” in Proc. IEEE
IECON ’02, vol. 1, pp. 209-215, 2002.
[87] H. H. C. Lu, Y. Zhou and C. K. Tse, “Fast-scale instability in a PFC boost
converter under average current-mode control,” Int. J. Circuit Theory Appl., vol.
31, pp. 611-624, 2004.
117