HYDRAULIC FILTRATION FS-1 series Suction strainers Technical Information Connection Ports: 3/8” to 4” BSP (other thread options on request) Materials: Head: Endcap: By-pass: nylon zinc plated carbon steel NBR By-pass: On request only - 0,25 bar (3,6 psi) setting (not available for FS-1-90, FS-1-91) Filter media: Wire mesh 125 µm (60 and 250 µm on request) Differential collapse pressure: 1 bar (14,5 psi) (acc. to ISO 2941) Working temperature: -25°C +100°C (-13°F +212°F) Fluid compatibility (acc. to ISO 2943): Full with HH-HL-HM-HV (acc. to ISO 6743/4). For use with other fluids please contact Filtrec Customer Service (info@filtrec.it). w w w. f i l t r e c . c o m FS-1 series Ordering information NOMINAL SIZE CONNECTION SIZE MEDIA BY-PASS 30 B6 T125 B FS-1 CONNECTION SIZE B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 1 1 2 3 3/8” 1/2” 3/4” 1” 1/4” 1/2” 2” 1/2” 3” 1/2” 4” BSP BSP BSP BSP BSP BSP BSP BSP BSP BSP BSP NPT option available on request please check availability with Filtrec Customer Service. MEDIA * T60 wire mesh wire mesh wire mesh T125 * T250 standard version, please check availability * Not with Filtrec Customer Service. BY-PASS 0 *B no by-pass 0,25 bar / 3,6 psi standard version, please check availability * Not with Filtrec Customer Service. Not available for FS-1-90, FS-1-91 FS-1 series 2 Overall dimensions FS-1-10 - ... - 43 & 90/91 FS-1-50 - ... - 89 B A E C B A C BY-PASS OPTION Nominal size CODE FS-1-10 FS-1-11 FS-1-20 FS-1-21 FS-1-30 FS-1-33 FS-1-34 FS-1-40 FS-1-42 FS-1-43 A 3/8” - 1/2” 3/8” - 1/2” 3/4” - 1” 3/4” - 1” 1” - 1 1/4” - 1 1/2”- 2” 1” - 1 1/4” - 1 1/2”- 2” 1” - 1 1/4” - 1 1/2”- 2” 1 1/2” - 2” - 2 1/2” - 3” 1 1/2” - 2” - 2 1/2” - 3” 1 1/2” - 2” - 2 1/2” - 3” FS-1-50 3/8” - 1/2” 1/2” - 3/4” 1” - 1 1/4” 1/2” - 3/4” 1” - 1 1/4” 1” - 1 1/4” - 1 1/2” 2” 1” - 1 1/4” - 1 1/2” 2” 1” - 1 1/4” - 1 1/2” 2” 1” - 1 1/4” - 1 1/2” 2” 1/2” - 2” - 2 1/2” - 3” 1/2” - 2” - 2 1/2” - 3” 1/2” - 2” - 2 1/2” - 3” 1/2” - 2” - 2 1/2” - 3” 1/2” - 2” - 2 1/2” - 3” 3 1/2” 4” FS-1-60 FS-1-62 FS-1-70 FS-1-73 FS-1-76 FS-1-79 FS-1-80 FS-1-81 FS-1-83 FS-1-86 FS-1-89 FS-1-90 FS-1-91 1 1 1 1 1 B 46 64 C 91 106 109 D E 36 3 50 139 86 150 54 200 260 151 212 272 83 104 73 148 155 195 102 228 110 131 178 202 162 235 279 110 390 440 65 6 75 110 27 34 50 34 50 60 70 60 70 60 70 60 70 9 6 9 98 140 --- Not standard version, please verify minimum order quantity with Filtrec Customer Service FS-1 series 3 Pressure Drop diagrams The pressure drop of these strainers is mainly related to the connection size, indicated in the box. The maximum recommended pressure drop is 0,1 bar (1,45 psi). gpm gpm B2 B4 B3 psi psi B5 l/min l/min gpm gpm B8 B6 psi B9 psi B7 B10 l/min l/min psi gpm B11 B12 120 240 360 l/min 480 600 CT12-rev.00-10/14 The above pressure drop diagrams have been obtained at the FILTREC laboratory, according to the ISO 3968 specification, with mineral oil having 30 cSt viscosity and 0,86 Kg/dm3 density. When using oil with different viscosity the values can be calculated. (Dp x new viscosity/30) FS-1 series w w w. f i l t r e c . c o m Technical information may change without notice