Cellite - Gordon Inc

advertisement
40064_EII Manufac Prod.qxd
2/25/04
5:10 PM
Page 23
Cellite
by Environmental Interiors, Inc.
PRISON LIGHTING
Luminaires Designed
Specifically for Maximum
Security Applications
Featuring:
• Die formed housing, tamper proof
security fasteners and security lensing
options maximize durability, maintain
impact resistance and prevent
unauthorized access to the fixture
• Meets all ACA and PIA recommended
lighting levels
• Variety of lensing options prevent
shattering or damage from fire
• Permanently embedded thru-stud lens
retention system and vertically adjustable,
continuous lens retention
hold downs secures fixture integrity
Selection Chart
Recessed Steel Plank Ceiling System
Recess mounted
1’ X 4’ 2’ X 4’ 2’ X 2’
add as a suffix to Catalog No.
*Security
16Ga. CRS (painted finish)
14Ga. CRS (painted finish)
14Ga. SS (brushed finish)
12Ga. CRS (painted finish)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Ballast/Circuits
add as a suffix to Catalog No.
*Designate number of ballasts/circuits required
Electronic Ballast, Single Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-1C
Electronic Ballast, Dual Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-2C
(Other ballast options available)
Voltage
add as a suffix to Catalog No.
120 Volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
277 Volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277
347 Volt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .347
Lensing Inner (Fixture) Side
add as a suffix to Catalog No.
.125 Prismatic Acrylic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A
.125 Prismatic Polycarbonate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B
.156 Prismatic Polycarbonate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D
.156 Prismatic Tempered Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E
.187 Prismatic Polycarbonate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G
Outer (Environment) Side
add as a suffix to Catalog No.
.125 Clear Polycarbonate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C
.156 Clear Polycarbonate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F
.187 Clear Polycarbonate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H
.187 Clear Tempered Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .J
.250 Clear Polycarbonate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .K
.250 Clear Tempered Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .L
.375 Clear Polycarbonate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .M
.375 Clear Tempered Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N
Fasteners
add as a suffix to Catalog No.
Torx head with center pin reject . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F1
Allen head with center pin reject . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F2
Ba
l
Cir last/
cu
its
Vo
lta
ge
Le
ns
I/O
Fa
ste
ne
rs
Op
tio
ns
La
mp
s
Se
cu
rity
Siz
e
Se
rie
s
Options
SDRF 14
*
232
E*
SDRF 14
*
332
E*
SDRF 22
*
417
E*
SDRF 22
*
3B40
E*
SDRF 24
*
332
E*
SDRF 24
*
432
E*
add as a suffix to Catalog No.
Emergency Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EM
Single Fuse And Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FU
Night Light (PL7 Or PL9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NL
© Copyright 2004 Environmental Interiors, Inc. Printed in the U.S.A.
Environmental Interiors® is a registered trademark of Environmental Interiors, Inc.
40064_EII Manufac Prod.qxd
2/25/04
5:10 PM
Page 24
CROSS SECTION AND LONGITUDINAL
SPECIFICATIONS
Housing
Die formed and welded construction
for maximum durability and impact
resistance. 16 ga. cold rolled steel
gauge construction.
Door
One piece, die formed construction
maximizes resistance to impact. Available in 16, 14 or 12 ga. cold rolled
steel reference Selection Chart
Hinge
Lens
Electrical
Continuous, concealed piano hinge
with pin welded to knuckle to
prevent removal. Hinge is welded
to door frame and securely attached
to housing.
Choice of acrylic, polycarbonate, or
tempered glass lensing. Specified as
internal (fixture) and external (environmental) sides. Reference ordering
matrix for lens materials.
All ballasts are class P, UL listed,
CBM/ETL certified.
Lens Retention
0º
45º
90º
0
90
384
80
768
70
1152
60
1536
1920
50
2304
0
10
20
30
40
0º
Lens secured to housing with thrustuds (permanently embedded on 6”
maximum spacings) and vertically
adjustable, continuous lens retention
hold downs.
Fasteners
Hardened security fasteners, as specified. Reference ordering matrix for
specifications.
90º
45º
© Environmental Interiors, Inc. 2004
Environmental Interiors ®, Celline ®, Cellock ®, and Lockdown ® are registered federal trademarks of Environmental Interiors, Inc.
Finish
All metal components are finished in a
polyester powder coat applied over a
5-stage pre–treatment process.
Reflectance: 94%, Hardness: 2H,
Salt Spray Test: 500 hours.
Listings
UL/cUL listed for damp locations.
Download