DRD2
LED RECESSED LUMINAIRE
GENERAL NEW CONSTRUCTION
4”, 5”, 6” APERTURE IC/NON-IC
PRODUCT SPECIFICATIONS
FRAME-IN KIT
HOUSING: 18 ga. die-formed aluminum box fastened to 22 ga. steel
mounting frame (4” application), 20 ga. die-formed aluminum (5”
application), 22 ga. die-formed aluminum (6” application), 20 ga. dieformed aluminum (6” shallow application).
JUNCTION BOX: Galvanized steel. Equipped with (6) 1/2” and (1) 3/4”
knockouts with pryout slots to allow straight conduit runs. (4) knockouts
for non-metallic sheathed cable installation. Junction box tension spring
allows snap-in installation of plate cover for easy access to wiring.
Approved for 8 (four-in, four-out) #12 AWG 90 through wire conductors.
MOUNTING: Pre-installed adjustable bar hangers engineered to
accommodate lumber, laminated beams and T-bar.
CEILING: 1/2” up to 1”.
CUTOUT: 4 3/8” (4” application), 5 3/4” (5” application), 6 3/8” (6”
application, 6” shallow application).
LIGHT ENGINE
LED: Tightly binned Cree® high-brightness white LEDs maintain excellent
fixture to fixture color consistency. Mechanically secured to heatsink.
Delivers 93+ CRI in all available color temperatures.
BINNING: Color variation within 2-step MacAdam ellipse.
CONNECTOR: IDEAL PowerPlug® Luminaire Disconnect, female. Alternate module construction with 0-10V, EcoSystem® dimming and/or Emergency Battery
Backup Unit uses an IDEAL PowerPlug® Model 102 connector.
DRIVER: Integral electronic driver for 120/277V 50/60Hz operation. Electronic driver compatible with trailing edge and leading edge dimming at 120V only.
SYSTEM POWER CONSUMPTION: 11.8W (750 lm module), 14.7W (1000 lm module).
DIMMING: TRIAC/ELV dimming standard for 120V only, with flicker-free dimming down to 10% of total lumen output. Optional 0-10V or EcoSystem® dimming
available for 120V/277V.
EMERGENCY LIGHTING: Optional Emergency Battery Backup Units are available for 120V/277V.
RATED LED LIFE: 50,000 hours at 70% lumen maintenance, based on IESNA LM 80-2008 standard (L70, B50).
PHOTOMETRIC TESTING: Tested in accordance to IESNA LM-79-2008.
LABELS: IC rated. cULus listed. ENERGY STAR qualified. Title 24 2013 compliant. ASTM E283 certified Air Tight. UL Damp listed. UL Wet listed with applicable
trims. CEC listed.
WARRANTY: 5 year limited warranty.
TRIM
TRIM: Die-cast aluminum. Twist & Lock mounting allows easy field installation and tight ceiling fit.
PRODUCT CODE:
PROJECT:
TYPE:
CONTACT:
Page 1 of 9 | V 01-15
DATE:
© 2015 DMF Lighting. All Rights Reserved.
Specifications subject to change without notice.
WEBSITE: www.dmflighting.com
TEL: 1.800.441.4422
DRD2
LED RECESSED LUMINAIRE
GENERAL NEW CONSTRUCTION
4”, 5”, 6” APERTURE IC/NON-IC
ORDERING INFORMATION
FRAME-IN KIT#:
LIGHT ENGINE#:
TRIM#:
(Example: DRDHNIC4)
(Example: DRD2M7927)
(Example: DRD2TR4SWH)
FRAME-IN KIT:
PRODUCT CODE
LIGHT ENGINE:
PRODUCT CODE
TRIM:
DRDH
Housing
DRD2M (3)
APPLICATION
N
New Construction
Module
7
10 (2)
750 lm (11.8W)
1000 lm (14.7W)
9
4” Aperture
5” Aperture
6” Aperture
6” Aperture, Shallow
CCT
OPTION (4,9)
7O
10O
7C
10C
7TEM
TRIAC Dimming (Standard)
0-10V Dimming 750 lm
0-10V Dimming 1000 lm
EcoSystem Dimming 750 lm
EcoSystem Dimming 1000 lm
TRIAC Dimming w/
Emergency Battery 750 lm
10TEM
TRIAC Dimming w/
Emergency Battery 1000 lm
7EM
0-10V Dimming w/
Emergency Battery 750 lm
0-10V Dimming w/
Emergency Battery 1000 lm
EcoSystem Dimming
w/ Emergency Battery 750 lm
EcoSystem Dimming
w/ Emergency Battery 1000 lm
10EM
7CEM
10CEM
S
B
W (5,8)
WET (5,8)
4” Aperture
5” Aperture
6” Aperture
Smooth
Baffle
Wall Wash
Wet Location
FINISH
OPTION (4)
A (9)
Round
Square
Deep
APERTURE
STYLE
2700K
3000K
3500K
4000K
Alternate
Construction
WH
BK
SW
AZ (10)
Notes:
1 Only applicable for 4” aperture
2 4” IC housing not compatible with 1000 lm
module
3 Provided with integral electronic driver for
120/277V 50/60Hz operation
4 If optional dimmer is ordered for frame-in kit,
alternate construction option must be ordered for
light engine
5 Only available in smooth style
6 Only available in 6” aperture
PRODUCT CODE:
PROJECT:
R
S (1,5,12)
D (6,7,11)
4
5
6
93+ CRI
27
30
35
40
Trim
SHAPE
CRI
APERTURE
4 (2)
5
6
6S
DRD2T
LUMENS (Watts)
IC/NON-IC
IC
Insulation Contact
[Blank] (1) Non Insulation Contact
PRODUCT CODE
CC
White
Black
Silver Reflector,
White Flange
Low Iridescent
Reflector, White
Flange and
Baffle
Custom
7 Only available in smooth or baffle style
8 Only available in white finish
9 Alternate Construction uses an IDEAL Model 102 connector
10 Only available in deep shape
11 Only available in white, low iridescent or custom finish
12 Only available in white, black or custom finish
TYPE:
CONTACT:
Page 2 of 9 | V 01-15
DATE:
© 2015 DMF Lighting. All Rights Reserved.
Specifications subject to change without notice.
WEBSITE: www.dmflighting.com
TEL: 1.800.441.4422
DRD2
LED RECESSED LUMINAIRE
GENERAL NEW CONSTRUCTION
4”, 5”, 6” APERTURE IC/NON-IC
FRAME-IN KIT DIMENSIONS
DRDHNIC4 4” New Construction IC Housing
DRDHNIC5 5” New Construction IC Housing
SIDE VIEW
SIDE VIEW
71 4 "
184mm
51 2 "
140mm
534"
146mm
CEILING CUT OUT
438"
110mm
CEILING CUT OUT
612"
165mm
TRIM
5"
126mm
TRIM
BOTTOM VIEW
BOTTOM VIEW
10716"
266mm
121 4 "
311mm
51516"
152mm
65 8 "
168mm
UP TO 24"
[UP TO 610mm]
UP TO 24"
[UP TO 610mm]
Page 3 of 9 | V 01-15
© 2015 DMF Lighting. All Rights Reserved.
Specifications subject to change without notice.
WEBSITE: www.dmflighting.com
TEL: 1.800.441.4422
DRD2
LED RECESSED LUMINAIRE
GENERAL NEW CONSTRUCTION
4”, 5”, 6” APERTURE IC/NON-IC
DRDHNIC6 6” New Construction IC Housing
DRDHNIC6S 6” Shallow New Construction IC Housing
SIDE VIEW
SIDE VIEW
7"
178mm
63 8 "
162mm
CEILING CUT OUT
5316"
131mm
63 8 "
162mm
CEILING CUT OUT
712"
191mm
TRIM
712"
191mm
TRIM
BOTTOM VIEW
BOTTOM VIEW
11"
279mm
11"
279mm
61 2"
165mm
UP TO 24"
UP TO 610mm
61 2"
165mm
UP TO 24"
UP TO 610mm
Page 4 of 9 | V 01-15
© 2015 DMF Lighting. All Rights Reserved.
Specifications subject to change without notice.
WEBSITE: www.dmflighting.com
TEL: 1.800.441.4422
DRD2
LED RECESSED LUMINAIRE
GENERAL NEW CONSTRUCTION
4”, 5”, 6” APERTURE IC/NON-IC
LIGHT ENGINE DIMENSIONS
Light engine includes LED chip,
die-cast heatsink, driver and
optical system. Fits trims in the
DRD2T series. Equipped with a
2-pole connector that mates with
male connector inside the frame/
housing.
DRD2M LED Module
1716"
37mm
3 78 "
98mm
TRIM DIMENSIONS
DRD2TR4W 4” Wall Wash Trim
DRD2TR4 4” Round Trim
DRD2TS4 4” Square Trim
1.85in
47mm
2716"
61mm
8"
3mm
1
234"
69mm
1.88in
48mm
8"
3mm
1
"
18mm
11
16
2"
51mm
234"
70mm
3916"
91mm
5"
127mm
5"
127mm
DRD2TR5 5” Round Trim
412"
114mm
412"
114mm
DRD2TR5W 5” Wall Wash Trim
1916"
40.08mm
8"
3.31mm
238"
60mm
1
3516"
84mm
234"
70mm
7
8"
23mm
5"
128mm
612"
165.10mm
612"
165mm
Page 5 of 9 | V 01-15
© 2015 DMF Lighting. All Rights Reserved.
Specifications subject to change without notice.
WEBSITE: www.dmflighting.com
TEL: 1.800.441.4422
DRD2
LED RECESSED LUMINAIRE
GENERAL NEW CONSTRUCTION
4”, 5”, 6” APERTURE IC/NON-IC
DRD2TR6W 6” Wall Wash Trim
DRD2TR6 6” Round Trim
1916"
40mm
238"
60mm
8"
3mm
1
31316"
96mm
234"
70mm
6"
153mm
712"
191mm
712"
191mm
7
8"
23mm
DRD2TD6 6” Deep Trim
358"
93mm
16"
1mm
1
21116"
68mm
7"
178mm
Page 6 of 9 | V 01-15
© 2015 DMF Lighting. All Rights Reserved.
Specifications subject to change without notice.
WEBSITE: www.dmflighting.com
TEL: 1.800.441.4422
DRD2
LED RECESSED LUMINAIRE
GENERAL NEW CONSTRUCTION
4”, 5”, 6” APERTURE IC/NON-IC
LED & DRIVER INFORMATION
DRD2M7
DRD2M10
DELIVERED LUMEN OUTPUT (LM)
750
1000
RATED POWER (W)
11.8
14.7
EFFICACY (LM/W)
64
COLOR CONSISTENCY
68
2-step SDCM
CCT OPTIONS
2700K, 3000K, 3500K, 4000K
COLOR RENDERING INDEX
93+
CRI /R9
50
LIFETIME (L70)
50,000
MAX AMBIENT OPERATING TEMPERATURE
40°C
INPUT VOLTAGE (V)
120/277V, 50/60Hz
INPUT CURRENT AT 120V (MAX)
0.10A
0.13A
INPUT CURRENT AT 277V (MAX)
0.042A
0.053A
POWER FACTOR
>0.9
TOTAL HARMONIC DISTORTION
<20%
DIMMING
100%-10%, see Page 1 for dimming details
Page 7 of 9 | V 01-15
© 2015 DMF Lighting. All Rights Reserved.
Specifications subject to change without notice.
WEBSITE: www.dmflighting.com
TEL: 1.800.441.4422
DRD2
LED RECESSED LUMINAIRE
GENERAL NEW CONSTRUCTION
4”, 5”, 6” APERTURE IC/NON-IC
DIMMER COMPATIBILITY
DRD2M7 per dimmer
Dimmer
Brand
Cooper
Crestron
Legrand
Series
Model
number
Min
Max
Dim level
Min
Max
Dim level
Decorator
DAL06P
1
12
1%
1
10
2%
Decorator
DLC03P
1
12
1%
1
10
1%
Slide Dimmer
SLC03P
1
10
1%
1
8
1%
iLux
CLS-EXP-DIMU
1
85
12%
1
68
12%
DIN Rail
DIN-1DIM4
1
55
8%
1
44
8%
Green Light
GLX-DIM6
1
85
10%
1
68
10%
Green Light Express
GLXX-2DIM8
1
12
10%
1
9
10%
Adorne
ADPD703TU
2
12
10%
2
9
10%
Harmony
H703PTU
2
10
10%
2
8
10%
Harmony
HCL453P
1
16
10%
1
13
10%
Decora
6673-10W
3
10
11%
3
8
12%
IPI06-1LZ
3
10
11%
3
8
7%
6631-2
3
10
1%
3
8
7%
IPE04
1
5
5%
1
4
6%
6633-P
3
10
1%
3
8
1%
6161
1
12
14%
1
10
16%
Decora IllumaTech
Leviton
SureSlide
Lightolier
6615
1
6
10%
1
5
10%
6621-P
1
12
10%
1
10
10%
Trimatron
6683-IW
3
10
6%
3
8
6%
Vizia+
VPE06
1
10
8%
1
8
10%
VP106
3
10
1%
3
8
8%
MultiSet Pro
MSP300QE
1
12
10%
1
10
10%
Sunrise
ZP260QE
1
10
10%
1
8
10%
Ariadni
AYLV-600P
1
12
10%
1
10
10%
DV600P
3
10
5%
3
8
5%
DVELV303P
1
5
5%
1
4
6%
DV603P
3
10
5%
3
8
6%
Diva CL
DVCL-153P
1
12
10%
1
10
10%
Faedra
FAELV500
1
9
10%
1
7
11%
Luméa
LG600P
3
10
6%
3
8
6%
Diva
Maestro
Lutron
DRD2M10 per dimmer
MAW600
3
10
7%
3
8
13%
MAELV600
1
10
9%
1
8
10%
Maestro CL
MACL-153M
1
10
9%
1
8
6%
Radio RA2 Maestro
RRD-6NA
1
12
10%
1
10
10%
S-603PG
3
10
5%
3
8
6%
Skylark
S600P
3
10
2%
3
8
3%
SELV300P
1
5
6%
1
4
6%
Skylark CL
SCL-153P
1
10
7%
1
8
8%
Skylark Contour
CT103P
3
18
7%
3
14
9%
Toggler
TG-603PGH
1
12
10%
1
10
10%
Toggler CL
TGCL-153P
1
10
6%
1
8
6%
Page 8 of 9 | V 01-15
© 2015 DMF Lighting. All Rights Reserved.
Specifications subject to change without notice.
WEBSITE: www.dmflighting.com
TEL: 1.800.441.4422
DRD2
LED RECESSED LUMINAIRE
GENERAL NEW CONSTRUCTION
4”, 5”, 6” APERTURE IC/NON-IC
PHOTOMETRICS
LIGHT ENGINE: DRD2M7930
TRIM: 6 Inch Round Smooth
LUMINOUS INTENSITY
Gamma
C 0º
0.0º
406
5.0º
404
10.0º
400
15.0º
394
20.0º
386
25.0º
373
30.0º
351
35.0º
316
40.0º
265
45.0º
208
50.0º
154
55.0º
100
60.0º
55
65.0º
24
70.0º
8
75.0º
4
80.0º
1
85.0º
0
90.0º
0
200
300
400
0º
cd
15º
C0 - C180
C90 - C270
30º
APPLICATION REFERENCE
LED
Module
Flux
(lm)
DRD2
799
Average
Power Downlight
LPD
Illuminance
Max/Min
(W) Spacing (ft)
(W/sq ft)
(fcd)
4x4
49
1.41
0.7
11.7
6x6
25
1.1
0.37
8x8
12
1.36
0.18
Calculation area: 50’(L) x 40’(W) x 10’(H).
LLF 1.0, 80/50/20 Reflectance, 2.5’(H) workplane.
Spacing criteria: 1.28
ZONAL LUMEN SUMMARY
Zone
Lumens %Luminaire
0-30
321
40.2%
0-40
517
64.6%
0-60
768
96.1%
0-90
799
100%
0-180
799
100%
COLOR TEMPERATURE MULTIPLIER
CCT
Relative lumen factor*
2700K
0.87
3000K
1.00
3500K
1.00
4000K
1.07
*Value based upon testing with 3000, 95CRI. Lumen output
of other color temperature can be determined by multiplying
the relative lumen factor.
Values in candela
799 lm
LIGHT ENGINE: DRD2M10930
TRIM: 6 Inch Round Smooth
LUMINOUS INTENSITY
Gamma
C 0º
0.0º
540
5.0º
537
10.0º
531
15.0º
523
20.0º
510
25.0º
492
30.0º
461
35.0º
411
40.0º
342
45.0º
256
50.0º
172
55.0º
112
60.0º
74
65.0º
48
70.0º
27
75.0º
12
80.0º
6
85.0º
2
90.0º
0
200
300
400
500
0º
cd
15º
C0 - C180
C90 - C270
30º
APPLICATION REFERENCE
LED
Module
DRD2
Average
Power Downlight
LPD
Illuminance
Max/Min
(W) Spacing (ft)
(W/sq ft)
(fcd)
4x4
64
1.39
0.81
1046 13.5
6x6
32
1.09
0.43
8x8
16
1.27
0.20
Flux
(lm)
Calculation area: 50’(L) x 40’(W) x 10’(H).
LLF 1.0, 80/50/20 Reflectance, 2.5’(H) workplane.
Spacing criteria: 1.26
ZONAL LUMEN SUMMARY
Zone
Lumens %Luminaire
0-30
425
40.6%
0-40
679
65.0%
0-60
980
93.7%
0-90
1046
100%
0-180
1046
100%
Values in candela
COLOR TEMPERATURE MULTIPLIER
CCT
Relative lumen factor*
2700K
0.93
3000K
1.00
3500K
1.00
4000K
1.07
*Value based upon testing with 3000, 95CRI. Lumen output
of other color temperature can be determined by multiplying
the relative lumen factor.
1046 lm
Page 9 of 9 | V 01-15
© 2015 DMF Lighting. All Rights Reserved.
Specifications subject to change without notice.
WEBSITE: www.dmflighting.com
TEL: 1.800.441.4422