NEMA TYPE 4X HOUSING (SENSOR MODELS GH AND RH )
NEMA Type 4X Housing for
G-Series Model GH and R-Series Model RH Sensors
Parameters
Specifications
n Linear, absolute measurement
Measured variable:
Displacement and/or velocity*
n Non-contact sensing technology
Non-linearity:
Repeatability:
n Non-linearity less than 0.01%
Outputs:
Measuring range:
Operating voltage:
As good as < ± 0.01% F.S. (minimum ± 40 µm)*
< ± 0.001% F.S. (minimum ± 2.5 µm)
Hysteresis: < 4 µm typical 2 µm
Analog, Start/Stop, PWM, SSI, and CANbus*
Rod style: 50 - 7589 mm (2 - 298.8 in.)
+24 Vdc nominal: -15 or +20%
Polarity protection: up to -30 Vdc
Overvoltage protection: up to 36 Vdc
Current drain: 100 mA typical
Dielectric withstand voltage: 500 Vdc
(DC ground to machine ground)
Temperature: - 40 °C (-40 °F) to 75 °C (167 °F)
Emissions IEC/EN 50081-1, Immunity IEC/EN 50082-2, IEC/EN
61000-4-2/3/4/6, level 3/4 criterium A, CE qualified
100 g (single hit)/IEC standard 68-2-27 (survivability)
15 g/10-2000 Hz/IEC standard 68-2-6
Integral cable, black polyurethane jacket, with pigtail
termination
303/304 Stainless Steel
IP 67/NEMA Type 4X
304 Stainless steel
350 bar, 690 bar peak, (5,000 psi, 10,000 psi peak)
Any orientation. Threaded flange M18 x 1.5 or 3/4-16
UNF-3A
45 N-m (33 ft. - lbs.)
Ring magnet or magnet float
n Full range of outputs including Current, Voltage, SSI, CANbus
n Superior accuracy: Resolution down to 1 µm
n Repeatability within 0.001%
n Sealed IP67 / NEMA Type 4X stainless steel housing
Operating conditions:
EMC test:
Shock rating:
Vibration rating:
Connection type:
Housing:
Sealing:
Sensor rod:
Operating pressure:
Mounting:
Typical mounting torque:
Magnet type:
* Consult individual sensor data sheets for more product specifications
and sensor ordering codes
MTS Sensors
95
Temposonics® Linear-Position Sensors Product Catalog 551075 C
NEMA Type 4X Housing
n Rugged industrial sensor
DIMENSIONS AND HOW TO ORDER INFORMATION
Dimensions
154 mm (6.07 in.)
51 mm
(2.00 in.) dia.
51 mm
(2 in.)
Null
Wrench flats
44.5 mm (1.75 in.)
Stroke Length
63.5 mm
(2.5 in.)
Dead Zone
Magnet
Thread style *
19 mm
(0.75 in.)
Integral
Cable
10 mm
(0.39 in.) dia.
24.9 mm
(0.98 in)
22 mm
(0.88 in.)
* Consult the appropriate data sheet for specific product information
How to order
Order the NEMA Type 4X housing accessory and associated sensor
cartridge (GHB or RHB) as indicated below.
NEMA TYPE 4X HOUSING OPTION
H4 __ __ __ __ __ __
HOUSING STYLE
NEMA Type 4X Housing
S=
M=
US customary threads, flat-faced flange
Metric threads, flat-faced flange
STROKE LENGTH
__ __ __ . __ U = Inches and tenths (0.1 in. increments)
or
__ __ __ __ M = Millimeters (5 mm increments)
and
BASE SENSOR (cartridge)
RHB __ __ __ __ __ F __ __ 1 __ __ . . . *
GHB __ __ __ __ __ F __ __ 1 __ __ . . . *
or
Note: Add 1.2” (30 mm) to the stroke to account for additional Null.
* Consult individual sensor data sheets for more product specifications
(see product page reference below) and sensor ordering information at
www.mtssensors.com
R-Series Analog Output – (see page 7)
R-Series SSI Output – (see page 13)
G-Series Analog and Digital Pulse Outputs – (see page 45)
R-Series CANbus Output – (see page 19)
Temposonics® Linear-Position Sensors Product Catalog 551075 C
96
MTS Sensors