Surface Mount Voltage Controlled Oscillator Linear Tuning JTOS-25+ 12.5 to 25 MHz Features • 3 dB modulation bandwidth 130 kHz typ. • octave linear tuning • excellent harmonic suppression, -26 dBc typ. • low power consumption, 190 mW typ. • aqueous washable CASE STYLE: BK377 +RoHS Compliant Applications The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications • test instruments-signal generators • wideband frequency synthesizers Electrical Specifications FREQUENCY POWER TUNING (MHz) OUTPUT VOLTAGE (dBm) (V) PHASE NOISE (dBc/Hz) SSB at offset frequencies: Typ. Min. Max. Typ. Min. Max. 1 kHz 12.5 25 +8.0 1 11 -95 PULLING PUSHING TUNING HARMONICS 3 dB pk-pk (MHz/V) SENSITIVITY (dBc) MODULATION @ 12 dBr (MHz/V) BANDWIDTH (MHz) (MHz) 10 kHz 100 kHz 1 MHz Typ. Typ. Typ. Typ. Max. -115 -135 -155 0.03 0.02 1.0-4.0 -26 -13 Pin Connections DC OPERATING POWER Typ. Vcc (volts) Current (mA) Max. 0.13 12 20 Maximum Ratings RF OUT 13 Operating Temperature -55°C to 85°C VCC2 Storage Temperature -55°C to 100°C V-TUNE5 Absolute Max. Supply Voltage (Vcc) +15V GROUND1,3,4,6,7,8,9,10,11,12,14 Absolute Max. Tuning Voltage (Vtune) +12V all specifications: 50 ohm system Permanent damage may occur if any of these limits are exceeded. Outline Drawing Demo Board MCL P/N: TB-04 Suggested PCB Layout (PL-005) PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) A .505 12.83 B .800 20.32 C --- D .100 2.54 E .250 6.35 F .100 2.54 G .100 2.54 H .047 1.19 J .065 1.65 K .065 1.65 L wt .525 grams 13.34 3.0 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com REV. E M151107 ED-5278 JTOS-25+ FL/TD/CP/AM 150817 Page 1 of 2 JTOS-25+ Performance Data & Curves 100 5 +85°C T SENS. 4 60 3 40 2 20 1 0 0 1 3 5 7 9 11 Tuning Voltage (V) Harmonics (dBc) F4 -10 -20 -30 -40 -50 1 3 +25°C +85°C -55°C +25°C +85°C 1.00 2.00 3.00 4.00 5.00 0.70 0.80 1.10 1.06 2.10 11.84 11.72 11.666.486.215.82 12.68 12.53 12.458.178.178.02 13.88 13.67 13.568.278.528.50 15.55 15.26 15.128.598.938.97 17.72 17.34 17.158.899.259.30 6.00 7.00 8.00 9.00 10.00 2.60 3.00 3.50 3.70 3.00 20.39 19.93 19.699.009.369.42 23.60 22.96 22.698.909.269.34 27.31 26.43 26.098.809.169.22 31.02 30.07 29.678.358.678.72 33.77 33.07 32.707.838.058.07 V TUNE 0 F3 -55°C POWER OUTPUT (dBm) JTOS-25 Power Output 11 -55°C 10 5 7 Tuning Voltage (V) 9 11 HARMONICS (dBc) F2 F3 F4 -22.00-36.90-45.70 -30.70-41.50-46.70 -27.00-35.30-41.80 -19.70-29.50-41.00 -17.70-29.50-41.50 0.00 0.02 0.02 0.01 0.01 6.00 7.00 8.00 9.00 10.00 -17.80-30.00-40.00 -19.00-29.40-38.40 -22.20-29.70-38.30 -26.50-31.00-37.80 -30.10-31.10-37.70 0.01 0.03 0.11 0.18 0.12 11.00 -31.10-30.80-37.60 0.03 +85°C 8 7 6 5 1 3 5 7 Tuning Voltage (V) FREQ. PUSHING (MHz/V) 1.00 2.00 3.00 4.00 5.00 +25°C 9 11.00 1.90 35.46 34.96 34.647.887.607.56 JTOS-25 Harmonics Level F2 FREQUENCY (MHz) 9 11 9 11 JTOS-25 Frequency Pushing (Supply Voltage 12V) 0.25 Pushing (MHz/V) +25°C Tuning Sensitivity (MHz/V) Frequency (MHz) -55°C 80 TUNING SENS. (MHz/V) Output Power (dBm) V TUNE JTOS-25 Frequency and Tuning Sensitivity (at +25°C) 0.20 0.15 0.10 0.05 0.00 1 3 5 7 Tuning Voltage (V) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 2