Spacer kit

advertisement

AGILITY

Spacer Block Kit

This document is provided as a supplement to the AGILITY Back Systems Operation Manual and the AGILITY

Laterals Operation Manual and does NOT replace any information in these manuals unless otherwise noted.

SUPPLIER: This supplement must be given to the user of this product.

USER: Before using this product, read instructions and save for future reference.

DESCRIPTION OF USE

The AGILITY Spacer Block Kit (Spacer) is an optional accessory which may be installed to increase the spacing between the back shell hardware to accommodate more wheelchair sizes across all ROHO

®

AGILITY Back System (AGILITY) widths. The Spacer is designed to be used only with AGILITY Back Systems.

INFORMATION FOR SAFETY - GENERAL WARNINGS

WARNINGS

s DO NOT install a Spacer on an AGILITY without first reading and understanding this supplement. If assistance is needed, contact a clinician, ROHO provider or ROHO, Inc.

s DO NOT attach, remove or adjust the Spacer when an individual is seated in the chair.

s Check the Spacer for wear, breakage and tightness daily. Retighten loose bolts following the instructions throughout your original AGILITY product operation manual and this supplement. DO NOT continue to use the Spacer if any of the components cannot be tightened or are broken. ROHO, Inc. recommends that AGILITY and all accessories be thoroughly inspected periodically by a qualified technician.

INFORMATION FOR SAFETY - MOTOR VEHICLE TRANSPORTATION

CAUTION

: Whenever possible, the individual in the wheelchair with an AGILITY should transfer into a manufacturer-installed vehicle seat and use the vehicle’s crash-tested occupant restraint system.

AGILITY with Quick Release Attachment Hardware and AGILITY Spacer Block Kit has been dynamically tested for use in a motor vehicle by a third-party testing facility. Frontal impact test set-up included: s !'),)49INCM INHEIGHTs3URROGATE)3/2%3.!WHEELCHAIRFRAME37#& METALSEATFOURPOINTSTRAPTYPETIEDOWNAND37#&

ANCHOREDTHREEPOINTBELTs(YBRID)))MIDSIZEMALESEATEDFACINGFORWARDANDTORSOUPRIGHTs4OPOFTHEBACKSHELLALIGNEDWITHTHELOWEST

PARTOFTHESHOULDERSs"ACKCANEHARDWAREMOUNTEDBEHINDTHEBACKCANES

Testing, as described above, concluded that AGILITY with a Spacer meets all criteria for wheelchair seating systems proposed in Section 5.1.1 of

3ECTION!.3)2%3.!7#6OLUMEh7HEELCHAIR3EATING3YSTEMSFOR5SEIN-OTOR6EHICLESv

WARNING: AGILITY with a Spacer must be correctly and securely installed on the wheelchair following all instructions and warnings provided in this supplement and the AGILITY operation manual.

PARTS DETAIL - PACKAGE CONTENTS

Spacer Block x 2

30 mm M6-1.0 Width and

Height Adjustment Bolt x 4

(Positioned for Left side installation.)

(Positioned for Right side installation.)

35 mm M6-1.0 Width and

Height Adjustment Bolt* x 4

*Needed at specific attachment points if AGILITY

Laterals attached.

Nut x 4

AGILITY ™ Spacer Block Kit

This document is provided as a supplement to the AGILITY Back Systems Operation Manual and the AGILITY

Laterals Operation Manual and does NOT replace any information in these manuals unless otherwise noted.

SUPPLIER: This supplement must be given to the user of this product.

USER: Before using this product, read instructions and save for future reference.

DESCRIPTION OF USE

The AGILITY Spacer Block Kit (Spacer) is an optional accessory which may be installed to increase the spacing between the back shell hardware to accommodate more wheelchair sizes across all ROHO® AGILITY Back System (AGILITY) widths. The Spacer is designed to be used only with AGILITY Back Systems.

INFORMATION FOR SAFETY - GENERAL WARNINGS

WARNINGS s DO NOT install a Spacer on an AGILITY without first reading and understanding this supplement. If assistance is needed, contact a s clinician, ROHO provider or ROHO, Inc.

s

DO NOT attach, remove or adjust the Spacer when an individual is seated in the chair.

Check the Spacer for wear, breakage and tightness daily. Retighten loose screws following the instructions throughout your original

AGILITY product operation manual and this supplement. DO NOT continue to use the Spacer if any of the components cannot be tightened or are broken. ROHO, Inc. recommends that AGILITY and all accessories be thoroughly inspected periodically by a qualified technician.

INFORMATION FOR SAFETY - MOTOR VEHICLE TRANSPORTATION

CAUTION

: Whenever possible, the individual in the wheelchair with an AGILITY should transfer into a manufacturer-installed vehicle seat and use the vehicle’s crash-tested occupant restraint system.

AGILITY with Quick Release Attachment Hardware and AGILITY Spacer Block Kit has been dynamically tested for use in a motor vehicle by a third-party testing facility. Frontal impact test set-up included: s !'),)49INCM INHEIGHTs3URROGATE)3/2%3.!WHEELCHAIRFRAME37#& METALSEATFOURPOINTSTRAPTYPETIEDOWNAND

37#&ANCHOREDTHREEPOINTBELTs(YBRID)))MIDSIZEMALESEATEDFACINGFORWARDANDTORSOUPRIGHTs4OPOFTHEBACKSHELLALIGNEDWITHTHE

LOWESTPARTOFTHESHOULDERSs"ACKCANEHARDWAREMOUNTEDBEHINDTHEBACKCANES

WARNING: AGILITY with a Spacer must be correctly and securely installed on the wheelchair following all instructions and warnings provided in this supplement and the AGILITY operation manual.

PARTS DETAIL - PACKAGE CONTENTS

Spacer Block x 2 30 mm M6-1.0 Width and

Height Adjustment Bolt x 4

AGILITY™ Spacer Block Kit

The AGILITY Spacer Block Kit (Spacer) is an optional accessory which may be installed to increase the spacing between the back shell

DESCRIPTION OF USE INFORMATION FOR SAFETY - GENERAL WARNINGS Laterals Operation Manual and does NOT replace any information in these manuals unless otherwise noted.

This document is provided as a supplement to the AGILITY Back Systems Operation Manual and the AGILITY

USER: Before using this product, read instructions and save for future reference.

SUPPLIER: This supplement must be given to the user of this product.

used only with AGILITY Back Systems.

hardware to accommodate more wheelchair sizes across all ROHO® AGILITY Back System (AGILITY) widths. The Spacer is designed to be

tightened or are broken. ROHO, Inc. recommends that AGILITY and all accessories be thoroughly inspected periodically by a qualified AGILITY product operation manual and this supplement. DO NOT continue to use the Spacer if any of the components cannot be Check the Spacer for wear, breakage and tightness daily. Retighten loose screws following the instructions throughout your original DO NOT attach, remove or adjust the Spacer when an individual is seated in the chair.

clinician, ROHO provider or ROHO, Inc.

DO NOT install a Spacer on an AGILITY without first reading and understanding this supplement. If assistance is needed, contact a

third-party testing facility. Frontal impact test set-up included: AGILITY with Quick Release Attachment Hardware and AGILITY Spacer Block Kit has been dynamically tested for use in a motor vehicle by a seat and use the vehicle’s crash-tested occupant restraint system. : Whenever possible, the individual in the wheelchair with an AGILITY should transfer into a manufacturer-installed vehicle

INFORMATION FOR SAFETY - MOTOR VEHICLE TRANSPORTATION

PARTS DETAIL - PACKAGE CONTENTS

30 mm M6-1.0 Width and

provided in this supplement and the AGILITY operation manual.

WARNING: AGILITY with a Spacer must be correctly and securely installed on the wheelchair following all instructions and warnings

PARTOFTHESHOULDERSs"ACKCANEHARDWAREMOUNTEDBEHINDTHEBACKCANES ANCHOREDTHREEPOINTBELTs(YBRID)))MIDSIZEMALESEATEDFACINGFORWARDANDTORSOUPRIGHTs4OPOFTHEBACKSHELLALIGNEDWITHTHELOWEST s !'),)49INCM INHEIGHTs3URROGATE)3/2%3.!WHEELCHAIRFRAME37#& METALSEATFOURPOINTSTRAPTYPETIEDOWNAND37#& *Needed at specific attachment points if AGILITY Height Adjustment Bolt* 35 mm M6-1.0 Width and 35 mm M6-1.0 Width and

Height Adjustment Bolt* x 4

*Needed at specific attachment points if AGILITY

Laterals attached.

(Positioned for Left side installation.)

(Positioned for Right side installation.) Nut

Washer x 4 x 4

The following are trademarks and registered trademarks of ROHO, Inc.: ROHO® and AGILITY™.

ROHO, Inc. has a policy of continual product improvement and reserves the right to amend this document. The current version of this document is available at

Operation

Manual

Supplement

AGILITY Width

Adjustment

Guide

(4 mm Hex Key)

Dual Wrench

(10 mm Box End)

ROHO, Inc. has a policy of continual product improvement and reserves the right to amend this document. The current version of this document is available at www.therohogroup.com.

© 2013 ROHO, Inc.

The following are trademarks and registered trademarks of ROHO, Inc.: ROHO® and AGILITY™.

Products in this manual may be covered by one or more U.S. and foreign patents and trademarks. For further details please refer to www.therohogroup.com.

- 1 -

Operation

Manual

Supplement

AGILITY Width

Adjustment

Guide

Dual Wrench

Washer x 4

(4 mm Hex Key)

(10 mm Box End)

ROHO, Inc. has a policy of continual product improvement and reserves the right to amend this document. The current version of this document is available at www.therohogroup.com.

© 2013 ROHO, Inc.

The following are trademarks and registered trademarks of ROHO, Inc.: ROHO

®

and AGILITY

.

Products in this document may be covered by one or more U.S. and foreign patents and trademarks. For further details please refer to www.therohogroup.com.

- 1 -

PRODUCT SPECIFICATIONS*

Material

: Spacer Block is made of black acetal copolymer.

Wheelchair Compatibility

: If the Spacer is installed on an AGILITY, there may be up to an additional 0.25 in. (0.5 cm) loss of seat depth.

Refer to the AGILITY Width Adjustment Guide to determine whether the Spacer is required to install an AGILITY on your wheelchair.

*NOTE

: All measurements are approximate.

SPACER INSTALLATION

Note

: The AGILITY should be removed from the wheelchair and the cover removed from the AGILITY.

1

2

(30 mm)

(30 mm)

WIDTH ADJUSTMENT

3

4

SPACER INSTALLATION - AGILITY LATERALS ATTACHMENT

OPTION C: OPTION D:

35 mm

35 mm

Manufactured by ROHO, Inc.

Administrative Offices:

100 North Florida Avenue, Belleville, Illinois 62221-5429

Mailing/Shipping Address:

1501 South 74th Street, Belleville, IL 62223-5900, USA www.therohogroup.com.

U.S.A.: 800-851-3449, Fax 888-551-3449 e-mail: [email protected]

Outside the U.S.A.: 618-277-9150, Fax 618-277-6518 e-mail: [email protected]

)TEM41TY?????? 2EVISION

- 2 -

OPTION E:

35 mm

35 mm

0RINT$ATE??????

Download