Broadband
Configurable Data Equipment Rack System
Comm/net Systems, Inc.
7 foot tall, 19" data rack system.
Designed to seismic zone 4 compliance.
"Plug and Play" upgrade components for
multiple configurations.
18” and 30” Deep frame and cabinet versions
> Significantly exceeds competitive product specifications — Complies with Comcast equipment rack requirements
> 7' x 19" base design - sturdy welded relay rack frame
.
.
> Rear frame option kit, adds horizontal stabilizers on each side, rear cross-arm, mounting location for lacing bars and
vertical ground bar
.
> Heavy duty welded steel construction. All option kits include hardware and are easy to install on-site
.
> Optional front or back kick-panel AC duplex convenience outlet plates with outlets and duplex box pre-installed for
reduced electrical install project costs
.
> Optional left and right side panels for end of rack row installation or configuration as a cabinet system
.
> Built in two-hole ground lug attachment locations, on rack frame,optional vertical ground bar includes ground pigtail
with two-hole lugs on one end
.
> Rugged black epoxy powder coated finish for scratch resistance and quality appearance
.
> Optional 5" wide spacer panels for providing rack to rack spacing for vertical fiber management mounting on front of
rack area
.
> Vertical lacing bars available for ease of cable management within the rack structure
.
Advanced Power and Integration Services
Doc# 048–012–00/Jan.01.07
Broadband configurable data equipment rack system
General Specification:
Model #
Configuration
Part #
Description
P/N 016-500-10
19" x 7' relay rack frame only.
P/N 016-501-10
Rear frame kit. Includes vertical rails, base, horizontal
stabilizers, standard kick plate.
P/N 016-502-10
Front kick plate 120V duplex convenience outlet option.
P/N 016-503-10
Rear kick plate 120V duplex convenience outlet option.
P/N 016-504-10
Vertical lacing bar kit. Four vertical lacing bars with hardware.
Accepts cable ties or lacing twine for cable management.
P/N 016-505-10
5" wide spacer kit. 7' tall x 5" wide plate that allows racks to be
bolted together side by side with spacer. Use for vertical fiber
management surface mounting. Includes hardware (Note, two
required for use with universal side panel kit if spacers are
required between rack and side panels).
P/N 016-506-10
Universal side panel kit. Mounts on either left or right side of
equipment rack OR mounts to 5" wide spacer kit (requires two
spacers, one front, one back for this application).
P/N 016-507-10
Vertical ground bar kit. Mounts to horizontal stabilizers
included in rear frame kit above. 1" W x .125" thick nickel/tin
plated copper. Includes #6 AWG ground pigtail with two-hole
lugs and hardware.
P/N 016-508-10
Hilti Anchor Kit. 4 anchors for mounting relay rack and rear
frame base to concrete floor.
P/N 016-509-10
Vertical 120VAC, 15A outlet strip option.
P/N 016-500-10
P/N 016-505-10
P/N 016-509-10
Base Relay Rack
Side Panels
Spacer Panel
AC Outlet Strip Detail
P/N 016-503-10
P/N 016-507-10
Convenience Outlet Kick Panel
Vertical Ground Bar Detail
P/N 016-504-10 (HDX Installed)
P/N 016-507-10
48 VDC Fuse/Circuit Breaker Panel Option
Rack Frame Ground Detail
Order Info:
Shipping costs extra - shipping packaging via pallet/box wrapper.
Comm/net Systems, Inc.
www.commnetsystems.com Email sales@commnetsystems.com
Seattle Corporate Office
4237 24th Avenue W Seattle, WA 98199 Tel. 206 282 8670 Fax. 206 282 8684
Doc# 048–012–00/Jan.01.07
800 274 0544 (24/7 Sales & Service)