DCT 531
Industrial
Pressure Transmitter
with RS485 Modbus RTU
Stainless Steel Sensor
accuracy according to IEC 60770:
standard: 0.35 % FSO
option: 0.25 % FSO
Nominal pressure
The DCT 531 with RS485 interface uses the
communication protocol Modbus RTU which has
found the way in industrial communication as an
open protocol. The Modbus protocol is based on
a master Slave architecture with which up to 247
Slaves can be questioned by a master – the data
will transfer in binary form.
from 0 ... 100 mbar up to 0 ... 400 bar
output signal
RS485 with Modbus RTU protocol
Special characteristic
►
perfect thermal behaviour
►
excellent long term stability
Due to the usage of high quality materials and
components, the DCT 531 is suitable for almost
every industrial application, if medium is compatible with stainless steel 316L.
The modular concept of the pressure transmitter
allows customized electrical or mechanical connections, so it is easy to adapt the DCT 531 to
different conditions on-site.
Optional versions
►
pressure port
G 1/2" flush from 100 mbar
►
pressure sensor welded
►
customer specific versions
Preferred areas of use are
Plant and Machine Engineering
Energy Industry
BD SENSORS GmbH
BD-Sensors-Straße 1
D - 95199 Thierstein
Tel:
Fax:
+49 (0) 92 35 / 98 11- 0
+49 (0) 92 35 / 98 11- 11
www.bdsensors.com
info@bdsensors.de
DCT 531
Industrial Pressure Transmitter with RS485 Modbus RTU
Input pressure range
Nominal pressure gauge
Nominal pressure abs.
Overpressure
Burst pressure ≥
Nominal pressure
gauge / abs.
Overpressure
Burst pressure ≥
Vacuum resistance
[bar]
[bar]
[bar]
[bar]
-1…0
5
7.5
[bar]
10
[bar]
[bar]
0.10
0,5
1.5
0.16
1
1.5
16
0.25
1
1.5
25
6
6
40
50
100
160
250
400
600
1000
1000
1250
1000
1250
standard for PN ≥ 0.4 bar:
≤ ± 0.35 % FSO
standard for PN < 0.4 bar:
≤ ± 0.5 % FSO
option for PN ≥ 0.4 bar:
≤ ± 0.25 % FSO
≤ ± 0.1 % FSO / year at reference conditions
500 Hz
accuracy according to IEC 60770 – limit point adjustment (non-linearity, hysteresis, repeatability)
Permissible temperatures
Permissible temperatures
-1 … 0
≤ ± 0.75
-20 ... 85
medium:
electronics / environment:
storage:
< 0.40
≤±1
0 ... 70
permanent
by exchanged supply connections no damage, but also no function
emission and immunity according to EN 61326
Mechanical stability
Vibration
Shock
10 g RMS (25 ... 2000 Hz) according to DIN EN 60068-2-6
500 g / 1 msec
according to DIN EN 60068-2-27
Materials
Pressure port / housing
Seals (media wetted)
Diaphragm
Media wetted parts
≥ 0.40
≤ ± 0.75
-20 … 85
-25 ... 125 °C
-25 ... 85 °C
-40 ... 85 °C
Electrical protection
Short-circuit protection
Reverse polarity protection
Electromagnetic compatibility
stainless steel 1.4404 (316 L)
standard: FKM
options:
EPDM
welded version 2
stainless steel 1.4435 (316 L)
pressure port, seal, diaphragm
others on request
welded version only with pressure ports according to EN 837
Miscellaneous
Current consumption
Weight
Installation position
Operational life
CE-conformity
4
4
4
20
25
600
1000
Thermal effects (Offset and Span)
Nominal pressure PN
[bar]
Tolerance band
[% FSO]
in compensated range
[°C]
3
2.5
2.5
10
15
60
VS = 9 … 32 VDC
2
1.6
1.6
10
15
210
420
Supply
Direct current
1
1
1
5
7.5
40
RS 485 with Modbus RTU protocol
Long term stability
Measuring rate
0.60
0.60
5
7.5
40
80
80
105
50
120
120
210
PN ≥ 1 bar: unlimited vacuum resistance
PN < 1 bar: on request
Output signal
Digital (pressure)
Performance
Accuracy 1
0.40
0.40
2
3
Technical Data
typ. 7 mA
approx. 210 g
any 3
> 100 x 106 pressure cycles
EMC Directive: 2014/30/EU
Pressure Equipment Directive: 2014/68/EU (module A) 4
Pressure transmitters are calibrated in a vertical position with the pressure connection down. If this position is changed on installation there can be slight
deviations in the zero point for pressure ranges PN ≤ 1 bar.
This directive is only valid for devices with maximum permissible overpressure > 200 bar
pressure and level
DCT 531
Industrial Pressure Transmitter with RS485 Modbus RTU
Technical Data
Wiring diagrams
RS 485 / Modbus RTU
supply +
p
Supply -
VS = 9 ... 32 VDC
A (+)
B (–)
RS 485
Pin configuration
M12x1 / metal
(4-pin)
1
3
2
4
Pressure port
Electrical connection
Supply +
Supply –
A+
BShield
Binder 723
(5-pin)
3
4
1
2
5
cable colour
(IEC 60757)
wh (white)
bn (brown)
gn (green)
ye (yellow)
gnye (green-yellow)
Electrical connections (dimensions in mm)
standard
option
M12x1 4-pin
(IP 67)
5
6
Binder Series 723 5-pin
(IP 67)
cable outlet with PVC cable
(IP 67) 5 (on request)
cable outlet, cable with ventilation tube
(IP 68) 6 (on request)
standard: 2 m PVC cable without ventilation tube (permissible temperature: -5 ... 70°C)
different cable types and lengths available, permissible temperature depends on kind of cable
Mechanical connections (dimensions in mm)
standard
G1/2" DIN 3852
with M12x1
www.bdsensors.com
DCT 531
Industrial Pressure Transmitter with RS485 Modbus RTU
Technical Data
Mechanical connections (dimensions in mm)
G1/4" DIN 3852
G1/2" open port
G1/2" EN 837
G1/4" EN 837
G1/2" DIN 3852
with flush sensor
1/2" NPT
1/4" NPT
 metric threads and other versions on request
Configuration Modbus RTU
Standard configuration
Address
001
address
-
1
-
1
001
…
247
Baud Rate
4800 Bd
9600 Bd
19200 Bd
38400 Bd
0
1
2
3
Parity
None
Odd
Even
0
1
2
© 2016 BD|SENSORS GmbH – The specifications given in this document represent the state of engineeringat the time of publishing. We reserve the right to make modifications to the specifications and materials.
option
DCT531_E_050816
Tel
+49 (0) 92 35 / 98 11- 0
pressure
and+49
level
Fax
(0) 92 35 / 98 11- 11
www.bdsensors.com
info@bdsensors.de
Ordering code DCT 531
DCT 531
-
-
-
-
-
-
-
Pressure
Input
1
1
1
1
D C 7
D C 8
1
1
2
4
6
1
1
2
4
6
1
1
2
4
6
1
1
2
4
X
9
0
6
5
0
0
0
6
5
0
0
0
6
5
0
0
0
6
5
0
1
9
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
9
0
0
0
0
0
1
1
1
1
1
2
2
2
2
2
3
3
3
3
2
9
consult
Output
Modbus RTU
Accuracy
standard for PN ≥ 0.4 bar
standard for PN< 0.4 bar
option for PN ≥ 0.4 bar
0.35 %
0.5 %
0.25 %
0.1 %
customer
Electrical connection
Male plug M12x1 (4-pin) / metal
Male plug Binder series 723 (5-pin)
Cable outlet with PVC cable
Cable outlet (IP68)
customer
Mechanical connection
G1/2" DIN 3852
G1/2" EN 837
G1/4" DIN 3852
G1/4" EN 837
G1/2" DIN 3852
with flush sensor
G1/2" DIN 3852 open pressure port
1/2" NPT
1/4" NPT
customer
Seals
FKM
EPDM
without (welded version)
customer
Special version
standard
customer
1
2
3
4
L5
3
5
2
1
9
2
3
consult
consult
M
2
T
T
9
1
0
A
R
9
3
7
0
0
9
consult
consult
consult
1
2
3
4
0
0
0
0
0
0
0
0
F 0 0
H
N
N
9
4
0
0
4
9
0
0
0
9
consult
1
3
2
9
consult
consult
0 0 0
9 9 9
consult
absolute pressure possible from 0.4 bar
standard: 2 m PVC cable without ventilation tube (permissible temperature: -5 … 70°C), others on request
cable with ventilation tube (code TR0 = PVC cable), different cable types and lengths available, price without cable
welded version only with pressure ports according to EN 837
15.03.2016
© 2016 BD|SENSORS GmbH - The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials.
gauge
absolute
[bar]
0.1
0.16
0.25
0.4
0.6
1
1.6
2.5
4
6
10
16
25
40
60
100
160
250
400
-1 … 0
customer