713-644-5558
www.HENEKFPS.com
HLV Series “Lo-Vac” Vacuum Dehydrator
For rapid water removal on all mineral based and synthetic lube oils, including turbine,
hydraulic, paper machine, gear, cutting, and heat transfer oils, Morgoil to ISO 680.
Description
Our unique thermal vacuum assisted process safely purifies
industrial oils which are contaminated with water, particulates,
and gases. Henek’s Lo-Vac units will degas, dehydrate, and
cleanse all types of lubricating and hydraulic oils quickly and
easily to a safe operational standard reducing costly failures due
to contaminated oil.
With the higher cost of oils and ever increasing environmental
regulation/liability, and manpower constraints, it is no longer
economical to replace your lubricating, turbine, and hydraulic oils
when contamination occurs. Restoring these oils to their original
strength through purification is more economical and most beneficial
to “in service” machinery. Our HLV Series of Low Vacuum (LoVac)
Oil Purification Systems are designed specifically to meet the
operational, economical, and environmental needs for purifying
lubricating oils.
HENEK’s Lo-Vac Systems can be used as stationary units or
portable with casters. Systems also custom manufactured within a
variety of trailer configurations to be completely portable or
selfcontained.
Features & Benefits
Specifications
•Removes free, emulsified and
dissolved water to less than 50ppm.
Up to 2% single pass removal rate.
•Reliable, low maintenance “Water
Miser” as standard vacuum source.
Water cooled & air cooled
condenser options
•Systems custom designed to meet
your processing needs
•ISO codes down to 12/10/7 per ISO
4406:1999
•Simple controls for manual or
automatic operation
•NEMA 4 weatherproof or NEMA 7
explosion proof available
•Modular design for easy monitoring
and maintenance
•Fully pre-piped, pre-wired, factory
wet tested for immediate installation
•Proven reliability backed by more
than 82 years of combined design
experience
HLV-360 Explosion Proof
HLV-1200
•Flow rates from 30 GPH to 3,000
GPH (higher capacities upon
request)
•Optional vacuum pump capacity to
3,000 CFM (higher capacities upon
request)
•Typical operating vacuum pressure
range during oil purification from 25
inches HG to 28 inches HG
•Pre-filter and polishing filter options
with a full range of heater
capacities
•Available in a variety of voltages to
meet your specific operating
Water Miser illustrated in gray color
Compact H-Framed Design
Low vacuum dehydrators with the same outstanding performance
as our traditional design with half the footprint.
HENEK Fluid Purity Systems, Inc. • Houston, Texas 77075 • Ph: 713-644-5558 • Fax: 713-943-3213 • www.henekfpscom • sales@henekfps.com
HENEK Fluid Purity Systems, Inc.
HLV SERIES CHART
STANDARD SPECIFICATIONS
MODEL NO. & FLOW GPH
HLV-60
HLV-120
HLV-360
HLV-600
HLV-900
HLV-1200
HLV-1800
HLV-2400
Heater capacity KW
6
12
16
32
48
64
96
128
Total Power Required AMPS
15
20
30
45
70
90
130
175
Motor, HP, Oil Discharge Pump
1/3
1/3
1
1
2
2
3
3
Quantity Coalescers HC-3135
1
2
5
10
12
14
20
24
Oil Discharge Pressure Range
Adjustable
Standard
Unit Range
—————
—————
—————
—————
—————-
 Unit comes standard with our proprietary Water Miser Vacuum System™. Vacuum pump options are available. Water cooled & Air
Cooled
 All Power calculations are for 480 Volts, 3 Phase, 50/60 HZ.
WEIGHTS AND DIMENSIONS
MODEL NO.
HLV-60
HLV-120
HLV-360
HLV-600
HLV-900
HLV-1200
HLV-1800
HLV-2400
Oil Inlet size NPT
1/2
3/4
1
1 1/2
1 1/2
1 1/2
2
2
Oil Outlet Size NPT
1/2
1/2
3/4
1
1 1/2
1 1/2
2
2
Coolant Line Size NPT
1/2
1/2
1/2
1/2
1/2
1/2
1
1
Approximate Height
81
81
84
84
84
84
84
94
Approximate Length
72
72
72
72
72
72
96
180
Approximate Width
48
48
48
48
48
48
60
72
Approximate Weight
1350
1350
3750
3850
4250
4350
Consult
Factory
(Air cooled optional)
Skid Sizes Vary with Options
SIGNIFICANT NUMBERING SYSTEM - Notes
- The Model Number identifies these major “Characteristics” and separates them with a dash mark for clarity.
- Use the chart below to identify your specific HENEK Low Vacuum Purifier
HLV - Series Major Characteristics Identification
Product Series -
Flow (US GPH) -
HLV
600
See Chart
Vacuum System - Electrical Enclosure - Heat (KW) - Options - Options - Options
W
W
32
W= Water Miser
System ™
W= Weather Proof
See Chart
A= Water Ejector
X = Explosion Proof
XX
-
XX
-
XX
List Options Alphabetically
C= Vacuum Pump
L=Liquid Ring
Vacuum Pump
HLVR12121201
HENEK Fluid Purity Systems, Inc. • Houston, Texas 77075 • Ph: 713-644-5558 • Fax: 713-943-3213 • www.henekfps.com • sales@henekusa.com