n
Top mounted equipment racks provide efficient floor space utilization n
Optional circuit breakers provide individual battery string disconnect n
Optional battery shunt permits current measurement for each battery bay n
Optional LORAIN ® VPS with meter- control-alarm unit permits single point adjustment and monitoring of current, voltage, and alarm status n
Optional low voltage battery disconnect operates during prolonged outages to prevent deep battery discharge n
Battery connection cables are supplied with factory installed lug adapters for easy installation n
Complies with industry standards: UL listed, NEBS Level
3 Certified, Seismic Zone 4 compliant.
The LORAIN ® Battery Stand provides capacities ranging from 50 to 860 amp-hours per bay for +24V applications and 50 to 930 amp-hours per bay for -48V applications.
Model 24BA200 (+24VDC) and model 48BA200 (-48VDC) battery stands mount
VRLA batteries in 2 to 4 tiers with a rectangular footprint 25"W x 23"D. Larger capacity requirements are filled by 5 and 6 tier systems with a rectangular footprint of 25"W x 26"D. Systems with four battery shelves or less can be equipped with the modular
LORAIN ® VPS mounted above the batteries providing a complete DC power plant in one bay. The LORAIN ® VPS is equipped with a MCA to control and monitor battery recharge current and low voltage battery disconnect, as well as measure battery discharge current.
Battery life is maximized through monitoring and controlling battery voltage and current during charge cycles.
Two-Bay Battery Stand (Frontview) with LORAIN ® VPS DC Power System
PDS-A-09 / December 2006

®
Single-bay Battery Stand
(Frontview)
Operating Ambient Temperature Range
Storage Ambient Temperature Range
Output Capacity
-40°C to +40°C (-40°F to +04°F)
-40°C to +85°C (-40°F to +85°F)
200 amps per bay,
3600 amps per system without LVBD,
2000 amps per system with LVBD
The LORAIN ® Battery Stand is designed for use in wireline and wireless communication systems installed in small offices, huts,
CEV’s and CUE’s. It is also designed for use with the LORAIN ® VPS and is compatible with most DC power equipment.
Additional specification, engineering and installation information may be obtained by requesting SAG58880000 for the
+24 volt system and SAG588820000 for the -48 volt system.
Emerson Network Power.
The global leader in enabling business-critical continuity.
© 2006 Emerson Network Power Energy Systems,
North America, Inc. All rights reserved.
Emerson Network Power Energy Systems
22 F St. Lorain, OH 44052
Toll Free: 800-800-280 (USA and Canada)
Telephone: 440-246-6999 Fax: 440-246-4876
Web: EmersonNetworkPower.com/EnergySystems
2
AC Power
Connectivity
DC Power
Embedded Computing
Embedded Power
Monitoring
Outside Plant
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Surge Protection
This publication is issued to provide outline information only which (unless agreed by Emerson Network Power Energy Systems, North
America, Inc. in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned.
Emerson Network Power Energy Systems, North America, Inc. reserves the right to alter without notice the specification, design or conditions of supply of any product or service.
The Emerson logo is a trademark and a service mark of Emerson
Electric Co. Emerson Network Power is a division of Emerson
Electric Co. Vortex ® , Candeo™ and LORAIN ® are trademarks of
Emerson Network Power Energy Systems, North America, Inc.
Printed in USA
PDS-A-09 / December 2006