Table of Contents
Clays:Moist................................................................................................................................... 2-4
Self Hardening.......................................................................................................................4
Dry..........................................................................................................................................5
Casting Slips..........................................................................................................................5
Glazes ......................................................................................................................................... 6-22
Underglazes................................................................................................................................. 23-29
Overglazes................................................................................................................................... 29-30
Non-Firing Products..................................................................................................................... 31-32
Mason Stains................................................................................................................................ 33-35
Glossary of Chemicals & Raw Materials...................................................................................... 36-38
Chemicals..................................................................................................................................... 39-41
Plaster .............................................................................................................................................42
Equipment:Kilns..................................................................................................................... 43-51
Kiln Accessories.................................................................................................. 52-57
Kiln Furniture....................................................................................................... 58-62
Wheels................................................................................................................ 63-67
Wheel Accessories.............................................................................................. 68-69
Extruders............................................................................................................. 70-71
Slab Rollers......................................................................................................... 72-73
Wedging Boards........................................................................................................73
Pugmills & Clay Mixers..............................................................................................74
Slip Casting......................................................................................................... 75-77
Glazing......................................................................................................................78
Decorating (Banding Wheels)...................................................................................79
Spraying....................................................................................................................80
Scales........................................................................................................................81
Studio Furniture............................................................................................................................ 82-83
Health & Safety............................................................................................................................ 84-85
Texture Tools/Tile Cutters............................................................................................................. 86-87
Decorating Accessories......................................................................................................................88
Clay Accessories.......................................................................................................................... 88-91
Tools........................................................................................................................................... 91-102
Sculpting Tools & Accessories..........................................................................................................103
Sponges, Greenware Files & Sanding Tools....................................................................................104
Brushes & Accessories............................................................................................................. 105-107
Modeling Materials...........................................................................................................................108
Casting & Mold Making Materials.....................................................................................................109
Fusible Glass & Accessories .................................................................................................... 110-111
Microkiln...........................................................................................................................................112
Packing Materials.............................................................................................................................112
Adhesives.........................................................................................................................................112
Storage Materials.............................................................................................................................113
Ware Accessories......................................................................................................................113-114
Plate & Bowl Holders........................................................................................................................114
Tiles & Accessories/Christmas Tree Accessories.............................................................................115
Lamp Parts.......................................................................................................................................116
Clock Movements.............................................................................................................................117
Bisque Information...........................................................................................................................117
Books...............................................................................................................................................117
Index..........................................................................................................................................118-123
1
Standard Moist Clays
The Clays
All clays are accurately formulated, completely mixed, pugged and deaired, and ready for immediate use or long storage. Clays are categorized
by temperature and listed in order from lowfire earthenware to highfire
stoneware and porcelain. Clay is shipped in plastic bags, two 25-pound
bags per carton. We strongly recommend testing the clays using your
particular working process, glazes and firing procedures before beginning
any important projects.
Using Clay Safely
Clay in moist form is considered non-toxic. Silica, which is present in all
ceramic clays, has been linked to the possibilities of environmental health
problems which may occur through long term respiratory exposure to the
dust in dry clay. Avoid dust producing procedures (dry mixing, sanding).
Keep clays moist. Be sure your work area is well ventilated. Wash or damp
mop floors and tables. Brushing up or sweeping will raise dusts.
LOW-FIRE CLAY BODIES
S100 Artist White - Cone 06-04
Excellent white firing clay for both throwing and handbuilding.
Works well with most commercial glazes and underglazes.
Should be used by studio artists and advanced programs looking for an all-purpose clay.
C/04: Shinkage 6.5%, Absorption 15.0%
RAKU CLAY BODIES
S239 Raku Clay - Cone 04-6
Open clay body specially formulated to withstand thermal
shock. Contains sand.
C/04: Shrinkage 8%, Absorption 17%
C/6: Shrinkage 13%, Absorption 4.5%
S295 Raku Body w/Kyanite - Cone 06
Good for large pieces. Kyanite adds strength.
C/06: Shrinkage 5%, Absorption 7.4%
MID-FIRE CLAY BODIES
S112 Brown Clay - Cone 4-6
Plastic clay for wheel & modeling. Granular manganese gives
speckled surface. Ideal temperature for best color is C/5. Good
in oxidation or reduction firing.
C/4: Shrinkage 12%, Absorption 4.5%
C/6: Shrinkage 12.5%, Absorption 2.5%
S200 Clay - Cone 4-6
S100G Artist White w/Grog - Cone 06-04
Same as #100 but contains approximately 5% fine grog
C/04: Shinkage 5.5%, Absorption 16.0%
All purpose mid range clay. Orange/brown in reduction, beige
in oxidation. Contains fine grog.
C/4: Shrinkage 10%, Aborption 3%
C/6: Shrinkage 12.5%, Absorption 2%
S103 Red Clay - Cone 02-2
S201 Clay - Cone 4-6
Low fire plastic terracotta designed for classroom. Traditional
terracotta color at C/06 oxidation, brick red at C/2 C/06: Shrinkage 9%, Absorption 12%
C/2: Shrinkage 14%, Absorption 6%
Plastic, all-purpose clay with fine grog. Lght gray in oxidation.
C/4: Shrinkage 10%, Aborption 3%
C/6: Shrinkage 12.5%, Absorption 2%
S104 Red Clay w/Grog - Cone 04-4
A nice plastic clay for throwing & handbuilding. At C/6 oxidation, its a warm brown color usually associated with reduction
firing. Reacts well with glazes.
C/6: Shrinkage 13%, Absorption 2.5%
Versatile clay w/fine grog. Good for handbuilding, slab work
and throwing.
C/04: Shrinkage 6%, Absorption 13.2%
C/4: Shrinkage 11%, Absorption 3%
S105 White Clay - Cone 06-04
Plastic low fire smooth body made with Texas talc.
Cone 06: Shrinkage 6%, Absorption 15.5%
Cone 04: Shrinkage 6.5%, Absorption 14.5%
S105G White Clay w/Grog - Cone 06-04
Same as 105 with the addition of grog for a toothy clay.
Cone 06: Shrinkage 5.6%, Absorption 15.3%
Cone 04: Shrinkage 5.0%, Absorption 14.5%
S105NT White Clay No Talc - Cone 06-04
Plastic low fire smooth body. Good for classroom use.
C/06: Shrinkage 6%, Absorption 15.5%
C/04: Shrinkage 6.5%, Absorption 14.5%
S211 Hazelnut Brown Clay - Cone 6
S225 Brown Clay - Cone 4-6
Same as S112, but has no specks. Ideal for throwing & slab
work. C/4: Shrinkage 12%, Absorption 4.5%
C/6: Shrinkage 12.5%, Absorption 2.5%
S240 White Clay - Cone 6
A very smooth, plastic throwing body.
C/6: Shrinkage 13%, Absorption 2.75%
S240G White Clay - Cone 6
A very smooth, plastic throwing body with fine grog.
C/6: Shrinkage: 12.5%, Absorption: 2.75%
S266 Dark Brown Clay - Cone 4-6
Gives reduction-like dark brown color in electric kiln. Smooth
and plastic. Good for all techniques. Contains manganese.
S105NTG White Clay No Talc w/Grog - Cone 06-04
C/4: Shrinkage 11.5%, Absorption 2.4%
Same as #105 but has fine grog. Gives a toothy clay that many
C/6: Shrinkage 13%, Absorption 1.4%
potters prefer.
C/06: Shrinkage 5%, Absorption 15.3%
S553 Warm Buff Clay - Cone 4-6
C/04: Shrinkage 5.6%, Absorption 14.5%
Good for production work. Contains fire clay and fine grog.
C/6: Shrinkage 12%, Absorption 2.7%
S417 Red Earthenware - Cone 06-02
Low fire body containing fire clay & small amount of fine grog.
Good for Majolica technique. Superior throwing body.
C/06: Shrinkage 6%, Absorption 5.3%
C/02: Shrinkage 11%, Absorption 1%
S528 Mocha Clay - Cone 04
Low fire, very smooth body. Mocha colored.
C/04: Shrinkage 8%, Absorption 13%
2
S563 Creamy White Stoneware - Cone 6
Smooth vitreous stoneware body. Contains no fire clay
C/6: Shrinkage 14%, Absorption 1.0%
S630 White Stoneware - Cone 6
Contains fire clay and mullite which enhances thermal properties.
C/6: Shrinkage 13%, Absorption 1.5%
Standard Moist Clays
S710 Dark Brown Clay w/Grog - Cone 4-6
Gives reduction-like dark brown color (S266) in electric kiln.
Smooth and plastic. Fine grog added. Good for all techniques.
Contains manganese.
C/4: Shrinkage: 11%, Absorption: 2.4%
C/6: Shrinkage: 12.5%, Absorption: 1.4%
S108 Red Clay w/Grog - Cone 4-10
A high fire red clay with medium grog & sand for surface texture
& minimal warping & cracking. Good for or sculpture, slab & coil
work. C/4: Shrinkage 10%, Absorption 6%
C/10: Shrinkage 12%, Absorption 3%
S119 Stoneware Clay - Cone 4-10
Similar working qualities to #112. Grayish tan color with very
fine black specks. Contains manganese and fine grog.
C/6: Shrinkage 12%, Absorption 2.2%
Contains course silica sand. Good for both salt & wood firings.
Natural earth colors at orange/brown at C/4 red.
C/4: Shrinkage 10%, Absorption 4%
C/10: Shrinkage 12%, Absorption 2.5%
MID-FIRE SCULPTURE & TILE BODIES
S181 White Stoneware - Cone 4-10
S760 Speckled Clay - Cone 6
S420 Sculpture Clay - Cone 2-6
Our most heavily grogged body, formulated for sculpture. Sand
color at C/6, off-white at C/2.
C/2: Shrinkage 7%, Absorption 8%
C/6: Shrinkage 8%, Absorption 1.5%
S547 Red Sculpture Clay - Cone 2-6
Has fine & medium grog. Good for tile & sculpture. Low absorption at C/4-6.
C/6: Shrinkage 10%, Absorption .25%
S509 Sandy White Clay - Cone 6
Light firing clay for tile & handbuilding. Can be thrown if potter
prefers a toothy body. Contains sand.
C/6: Shrinkage 12%, Absorption 2.5%
MID-FIRE PORCELAIN BODIES
S213 Porcelain Clay - Cone 6
A white body formulated for C/6. Plastic and good for throwing.
C/6: Shrinkage 12%, Absorption 1.7%
S551 V.P. Porcelain - Cone 6
Very plastic white porcelain. Good for throwing. Has no ball
clay. C/6: Shrinkage 13%, 0.3%
S365 English Porcelain - Cone 6
Porcelain body with a parian like quality. It’s white & tight &
translucent where thin. Contains no ball clay.
C/6: Shrinkage 13.5%, Absorption 0.6%
A very smooth white stoneware body. Contains no fire clay.
C/6: Shrinkage 13%, Absorption 2.8%
C/10: Shrinkage 13.9%, Absorption 2.5%
S182 White Stoneware - Cone 8-10
Near white plastic stoneware body. Good for use with bright
glazes. Available with or without grog.
Cone 8: Shrinkage 11%, Absorption 3%
Cone 10: Shrinkage 12%, Absorption 2.1%
S192 Baldwin Stoneware w/Fine Grog - Cone 6-10
Highly plastic and contains fine grog and sand for structural
strength. Buff in oxidation, tan through brown in reduction.
C/6: Shrinkage 11%, Absorption 8%
C/10: Shrinkage 13%, Absorption 4%
S205 Stoneware Clay - Cone 4-10
Formulated for reduction firing. Muted brick red at C/4, stone
gray at C/10. Contains fine grog.
C/4: Shrinkage 10.5%, Absorption 4%
C/10: Shrinkage 12.5%, Absorption 1.5%
S245 White Stoneware - Cone 6-9
A very smooth, plastic, white body with superior throwing and
building properties.
C/6: Shrinkage 10%, Absorption 5%
C/10: Shrinkage 15%, Absorption 3.2%
S308 Brooklyn Red Clay - Cone 4-8
HIGH-FIRE CLAY BODIES
Red stoneware body with sand & grog. Oxidation yields brick
red at C/6, deep warm brown at C/8.
C/4: Shrinkage 12%, Absorption 2.5%
C/8: Shrinkage 13%, Absorption 1%
S153 Stoneware Clay - Cone 4-10
S378 Speckled Clay - Cone 6-10
S259 Stoneware Clay - Cone 4-10
S507 Warm Brown Clay - Cone 4-10
A soft warm beige in oxidation, rich gray brown in reduction.
Responds well to all techniques. Excellent for production potter & classroom use.
C/4: Shrinkage 11%, Absorption 6%
C/10: Shrinkage 13%, Absorption 2%
Formulated to be similar to #153, but with richer tones.
C/4: Shrinkage 12%, Absorption 4.5%
C/10: Shrinkage 13%, Absorption .85%
S306 Brown Firing Clay - Cone 4-10
Smooth throwing body. Orange-brown in reduction, muted
orange to C/4. Gray at C/10 oxidation.
C/4: Shrinkage 11%, Absorption 4.5%
C/10: Shrinkage 13%, Absorption 1%
S101 Buff Clay - Cone 02-9
An all purpose stoneware clay with a wide fring range for
throwing & modeling. Buff color at low temperature & soft gray
at C/9 C/02: Shrinkage 9%, Absorption 5%
C/9: Shrinkage 12%, Absorption 3%
Excellent throwing body that is a rich gray with a very fine
speckled surface in oxidation, and a dark brown in reduction.
Similar properties to #153 clay. Contains manganese.
C/6: Shrinkage 10.5%, Absorption 5.0%
C/10: Shrinkage 13%, Absorption 2.0%
Stoneware body contains sand. Rich mottled orange/brown in
reduction, more subdued mottling in higher oxidation..
C/4: Shrinkage 10%, Absorption 4%
C/10: Shrinkage 12%, Absorption 2.5%
762 Kitchenware - Cone 6-9
A great functional stoneware that contains ingredients which
help with thermal shock. Ideal for kitchenware items. Must test
glaze to insure a good glaze/body fit before going into production. C/9: Shrinkage:
C/9: Absorption: 1%
S768 Stoneware Clay w/Mullite - Cone 4-10
Stoneware body contains sand. Rich mottled orange/brown in
reduction, more subdued mottling in higher oxidation..
C/10: Shrinkage 13%, Absorption 2.0%
3
Clays - Moist, Self-Hardening & Paper Clay
Standard Moist Clay Price List
HIGH-FIRE PORCELAIN BODIES
S130 Porcelain Clay - Cone 7-9
A white firing, high temperature plastic body. Very fine white
porcelain grog enhances strength & throwability.
C/7: Shrinkage 10%, Absorption .75%
C/9: Shrinkage 12%, Absorption .5%
Clay
S100
S257 English Porcelain - Cone 8-10
A porcelain body with a parian like quality. It’s white, tight &
translucent where thin. Contains no ball clay.
C/8: Shrinkage 13%, Absorption 1%
C/10: Shrinkage 15%, Absorption .65%
S600 Turner’s Best Porcelain - Cone 6-9
Tom Turner’s porcelain is extremely white and very plastic.  Excellent for throwing and very translucent.  Contains no ball clay
or inorganic plasticizers.  #600 is completely vitreous at C/9.
C/6: Shrinkage 12%, Absorption 1.4%
C/9: Shrinkage 15%, Absorption 0%
WOODFIRE CLAY BODIES
S437 Troy Porcelain - Cone 9-13
A versitile, plastic English kaolin body. Throws & takes glazes
well. Can be used in reduction, wood & salt firings. Transluscent when thin; wide range of color/texture in long wood firings.
C/10: Shrinkage 13%, Absorption 0.3%
S508 Woodfire Stoneware Clay - Cone 10+
Extremely versitile clay for throwing & handbuilding. Fires to a
very light gray. Works well in both reduction & woodfiring.
Cone 10: Shrinkage 12%, Absorption 1.5%
S621 Troy Woodfire Clay - Cone 10+
Woodfire body formulated with Helmer kaolin. Very plastic
throwing body. Excellent flashing results.
Cone 10: Shrinkage 12%, Absorption 0.4%
STANDARD AIR DRY CLAY (MOIST) - This self-hardening, fine water-based clay dries bone hard. NONTOXIC.
Specify color.910-GY Gray, 910-RD Red, 910-WH White.
AMACO SCULPTAMOLD SELF-HARDENING (DRY)
Hardens like “clay-plaster and papermache. Just add water. Sets in
30 minutes. Clings to almost all-clean surfaces including glass. Does
not shrink, so apply to armatures or any cores without fear of cracking. Light-weight, strong and durable, finished pieces may be carved,
sanded and sawed.
Price
Per
Price
Per 50 lb. Box
25 lbs.
50 lbs.
250 lbs.
500 lbs.
1000 lbs.
17.00
24.00
23.00
21.50
21.00
S100G
17.25
24.50
23.50
22.00
21.50
S101
16.00
22.75
21.75
20.25
19.75
S103
16.00
22.95
21.95
20.45
19.95
S104
17.50
25.00
24.00
22.50
22.00
S105
15.00
21.45
20.45
18.95
18.45
S105G
15.50
21.95
20.95
19.45
18.95
S105NT
15.00
21.45
20.45
18.95
18.45
S105NTG
15.50
21.95
20.95
19.45
18.95
S108
19.00
26.85
25.85
24.35
23.85
S112
16.00
22.75
21.75
20.25
19.75
S119
16.25
23.25
22.25
20.75
20.25
S130
18.00
25.50
24.50
23.00
22.50
S153
16.00
22.75
21.75
20.25
19.75
S181
19.25
27.50
26.50
25.00
24.50
S182
15.00
21.45
20.45
18.95
18.45
S182G
15.50
21.95
20.95
19.45
18.95
S192
15.50
22.20
21.20
19.70
19.20
S200
17.00
24.00
23.00
21.50
21.00
S201
17.00
24.00
23.00
21.50
21.00
S205
16.00
23.00
22.00
20.50
20.00
S211
17.00
24.20
23.20
21.70
21.20
S213
16.50
23.45
22.45
20.95
20.45
S225
15.50
22.25
21.25
19.75
19.25
S239
15.25
21.75
20.75
19.25
18.75
S240
16.50
23.45
22.45
20.95
20.45
S245
15.00
21.45
20.45
18.95
18.45
S257
26.50
38.00
37.00
35.50
35.00
S259
16.00
22.75
21.75
20.25
19.75
S266
19.25
27.45
26.45
24.95
24.45
$ 7.99
S295
17.25
49.95
S306
16.00
94.95
24.75
23.75
22.25
21.75
23.00
22.00
20.50
20.00
S308
17.00
24.50
23.50
22.00
21.50
PAPER CLAY
S365
25.50
36.45
35.45
33.95
33.45
Low Fire White Paper Clay - C/06-04
A low-fire talc body, which fires quite white. As a paper clay
body it is excellent for sculpture as well as raku. 50-lb. box.
PCLAY-LF
35.00 Box
S378
16.50
23.50
22.50
21.00
20.50
S417
17.00
24.45
23.45
21.95
21.45
S420
20.00
29.00
28.00
26.50
26.00
S437
27.75
39.65
38.65
37.15
36.65
S507
17.00
24.45
23.45
21.95
21.45
S508
17.00
24.45
23.45
21.95
21.45
S509
17.00
24.45
23.45
21.95
21.45
S528
17.50
25.00
24.00
22.50
22.00
S547
17.50
25.00
24.00
22.50
22.00
S551
22.75
32.45
31.45
29.95
29.45
S553
16.00
22.75
21.75
20.25
19.75
SCULT-3
SCULT-25
SCULT-50
3 lb.
25 lb.
50 lb.
Porcelain Paper Clay - C/6
Plastic porcelain for producing medium-sized pieces. The fired
body is white. 50-lb. box.
PCLAY-MCS
43.22 Box
Mid Smooth Stone Paper Clay - C/6
smooth stoneware ideal for handbuilding and sculptural projects. A light cream colour when fired, this clay will not mute
your glaze colors. 50-lb. box.
PCLAY-MSS
36.67.Box
4
Clays - Dry & Casting Slips
Price
Per
French Blush Porcelain Slip - C/6
Price
Per 50 lb. Box
Clay
25 lbs.
50 lbs.
250 lbs.
500 lbs.
1000 lbs.
S621
21.00
30.00
29.00
27.50
27.00
S630
16.00
23.00
22.00
20.50
20.00
S760
16.00
23.00
22.00
20.50
20.00
S762
26.00
37.45
36.45
34.95
34.45
S768
16.50
23.45
22.45
20.95
20.45
S910GY
16.75
26.75
25.75
24.25
23.75
S910RD
17.50
27.75
26.75
25.25
24.75
S910WH
16.00
25.75
24.75
23.25
22.75
E115
13.50
19.25
18.25
16.75
16.25
Standard Dry Clays
A lovely pale pink porcelain. Perfect for doll making.
Shrinkage at C/6: 15.5% Absorption at C/6: 0.5%
PORSLIP-FB
$21.50 per jar
Custom Casting Slips
Standard will mix slips to your specifications. Viscosity and
specific gravity must be provided. 50-gallon minimum order.
No set up charge. Call for details.
Slip Deflocculant
Sodium Silicate Liquid (Water Glass)
A wetting solution used in making & reclaiming slip.
SODSIL
Pint - 7.05 Darvan (liquid)
A deocculant preferred by professionals.
All Standard clay bodies are available in dry form. Moist clay
price is increased by $0.03 per pound. See the chart above for
pricing. Dry clay is available in 50-lb. bags or 2000-lb. Supersacks.
DARVAN Standard Casting Slips
SD8 8-oz sq. bottle SD32 32-oz refill Low-Fire White Slip - C/06-04
A superior quality, white casting slip with a unique formula.
Standard’s slip pours smoothly & quickly, drains evenly, produces greenware of good strength, & prolongs the mold life.
Absorption at C/04: 17%
SSLIP Low-Fire Slip 2-Gallon Box
1 Box
10.18 per box 20 Boxes
7.93 per box
5 Boxes 8.68 per box 40 Boxes
7.68 per box
10 Boxes 8.18 per box
SSLIP Low-Fire Slip 1-Gal. Jar 6.00 per jar
Terracotta Slip - C/06-04
A classic terracotta color at C/04. Excellent casting slip. Can
be used for all types of molds. Very good for functional ware.
Absorption at C/04: 5%
SLP820 2-Gallon Box
17.00
White Stoneware Slip - C/6
A smooth pouring stoneware slip. Releases easily. Excellent
for utility ware. Absorption at C/6: 3.3%
SSLIP-SW
White, 2-Gal. Box 13.50
Gallon - 24.99
Pint - 8.00 Gallon - 45.00
SlipDope (liquid)
Specially formulated for lowering the viscosity (thinning the slip) without adding unnecessary water which can ruin the slip. Instructions
included.
7.00
14.00
Mending Materials
Magic Mender - C06-04
Attach greenware to greenware, bisque to bisque, or greenware to bisque!!
Fill in hairline cracks. Indefinite shelf life. Instructions available. White.
MEND 4-oz jar $8.74
Aztec “High-Fire” Mender by Marx
For all Hi-Fire slip & clay, add your own brand & color slip to this concentrated base, mix well, & use. Repair greenware, bisque, attach add-ons,
or sculpt a patch to the ware. Fire to temperature of ware. Indenite shelf
life. Instructions available.
MENDHI
2-oz jar $7.86
Enhancer APT-II
You can: attach & repair clay or slip, greenware or bisque; plasticize slip
(make it into a thickened slip or modeling clay); glaze without streaking
or drag, & with less coats needed; cover “hard spots” in greenware; &
make reglazing much easier. Great for airbrushing. Indefinite shelf life.
Instructions available. 2-oz squeeze bottle.
APTC Ceramic APTP Porcelain & Stoneware 5.25
5.90
Tan Stoneware Slip - C/6-10
A smooth pouring stoneware slip. Fires beige in ox., brown in
reduction. Good for functional ware. Absorption at C/6: 2.0%
SSLIP-SWT Tan, 2-Gal. Box 13.50
Porcelain Slip - C/6
Beautiful porcelain finish with good green strength. Easy to
pour. Sets up quickly and can be patched. Releases readily
from molds, need less propping and has a long shelf-life.
Shrinkage at C/6: 16.5% Aborption at C/6: 1.2%
PORSLIP
Porcelain 16.25
English Porcelain Slip - C/6
A fine parian like porcelain. White, tight and transluscent where
thin. Easy to pour. Sets up quickly and can be patched. Releases readily from molds, need less propping and has a long
shelf-life. Shrinkage at C/6: 15.5% Absorption at C/6: 0.5%
PORSLIP-ENG English Por.
20.45
5
Glazes - Health Information
HEALTH LABEL EXPLANATION
FOR NONTOXIC & TOXIC PRODUCTS
We share your concern about health and safety regarding ceramic
materials for use in the home, school or institution. For this reason, this
catalog includes more information regarding nontoxic products than
before. This information is mainly directed toward the persons who use
the products; i.e.: the artist, ceramist, student, teacher, potter, etc. The
labels for these nontoxic products bear the AP Approved Product Seal
of The Art and Craft Materials Institute, Inc. Labels on products which
are toxic bear the HLCR Health Label (caution required). See below for
details on both types of symbols.
What the Labels Mean:
We strongly recommend when specifying or purchasing art materials, particularly for institutional use, that you carefully consider
the ultimate consumer. In cases where product may be used in
nursery or elementary school classes (K-6) or in environments
with physically or mentally handicapped persons who may be unable to read or understand safety labeling, you MUST specify and
purchase materials which are Non-Toxic which are the materials
printed in bold face and those certified by ASTM D-4236 with the
CP/AP non-toxic label. Specification and purchase of those materials will ensure that you meet the new Federal Regulations while
at the same time providing the most sensitive populations with the
opportunity to safely enjoy creative art and craft activities.
AP Label indicates NONTOXIC – All Non-Toxic colors are
printed in bold face. In addition, wherever possible we have
marked the products in this catalog with the appropriate product seal. Some bear the AP Approved Certified Non-Toxic
Product Seal of the Art and Craft Materials Institute, Inc. and
are certified in a program of toxicological evaluation by a medical expert
to contain no materials in sufficient quantities to be toxic or injurious to
humans or to cause acute or chronic health problems. These products
are safe for use in nursery and grade school classes and in environments with physically or mentally handicapped persons who may not be
able to read or understand safety labeling. NONTOXIC. Conforms to
ASTM D-4236.
CL Health Label Cautions Required Seal
Products bearing the CL Health Label (Cautions Required)
Seal of the Art and Craft Materials Institute, Inc. are certified
to be properly labeled with the appropriate cautions for safe
use. These products can be used by those persons who can read and
understand the cautions and follow the suggested safety precautions.
All CL labeled products conform to ASTM D-4236. NOT FOR SPRAY
APPLICATION.
NOT FOR SPRAY APPLICATION. May be harmful if swallowed, Ingestion may cause anemia, to the heart. Contains: One or both ingredients: copper and/or cobalt. Avoid ingestion. Wash hands immediately
after use. When using do not eat, drink or smoke. KEEP OUT OF
REACH OF CHILDREN. NOT FOR USE IN HEALTH CARE FACILITIES. For further health information, contact a poison control center.
WARNING: May be harmful if swallowed. Ingestion or breathing may
cause damage to the heart, nervous system, kidneys or bone marrow
or harm to fetus. Cancer agent based on experimental data. Contains:
One or more of the following ingredients: lead silicate frit, copper,
lithium, cobalt, cadmium and/or manganese. Avoid ingestion. Wash
hands immediately after use. When using do not eat, drink or smoke.
Wear apron. Do not use if pregnant or contemplating pregnancy. KEEP
OUT OF REACH OF CHILDREN. NOT FOR USE IN HEALTH CARE
FACILITIES. If swallowed, get prompt medical attention. For further
information, contact a poison control center.
When applying dinnerware safe glazes, they should not be mixed together since the balance of ingredients in each glaze will be disrupted.
Each mixture would have to be re-tested by an approved laboratory to
determine if the mixture is also dinnerware safe.
Since the dinnerware safety of a glaze is also determined by proper application and firing, careful and correct firing of dinnerware safe glazes
is critical. When firing dinnerware safe glazes, pyrometric cones should
be used on the kiln shelves to ensure that the pieces are fired to the
correct temperature. Follow the directions on the label. Due to possible
variations in firing and contamination, tableware producers must test all
finished ware to establish dinnerware-safety status. Due to changing
FDA regulations, always refer to product label for safety information.
WARNING:
Not all ceramic glazes contain lead compounds and extremely few
contain cadmium. Whether or not such glazes could be used on food
containers is listed on their individual labels. Well formulated glazes will
result in a stable surface which will not dissolve in contact with foods.
Most glazes are subjected to lead release testing by an independent,
approved laboratory to establish the dinnerware status of each glaze by
passing the guidelines established by the FDA for dinnerware glazes.
However, in view of the new reduced guidelines established by the
FDA in November 1991 and due to many variables that can affect lead
leachability in finished ware (exact firing temperature, contamination
from other ware being fired in the kiln, etc.), it is recommended that the
producer of any for sale dinnerware have it tested for leachable lead by
an approved laboratory to determine whether or not it meets FDA guidelines in its own category BEFORE IT IS PUT ON THE MARKET.
Some glazes are not suitable for use on food contact services. Glazes
that contain a crackle materials and textured surfaces are difficult to
clean within the cracks and can be soft and corroded if used frequently.
It is impossible for any glaze manufacturer to guarantee the finished
properties of its products since application and firing are critical factors over which the supplier has no control. Tableware producers are
responsible for complying with FDA guidelines for lead release. Any
statements concerning dinnerware safety must be confirmed by the
producer of the products through lead release testing by an approved
laboratory.
STAY INFORMED AND STAY HEALTHY
Learn and stay informed about the potential health hazards associated
with ceramic material use. The Ceramic Supply catalogue offers a
large amount of information that you should carefully read. Also, read
labels, follow use & care instructions and do your own safety research.
There are many informative websites including the manufacturers who
post safety and proper use information. The Chemical Manufacturers
Association has a hotline to answer questions about chemical toxicity,
use and disposal.
Call 800-262-8200.
Be sure you comply with OSHA requirements. Properly post that Material Data Safety Sheets (MSDS) are available for your employees to
read. Ceramic Supply maintains active files with all MSDS Sheets for
the materials we sell. Call us to order MSDS Sheets.
Do your research, take the time to be informed.
Ceramic Supply’s liabilIty is limited to the sale of the chemicals and
ceramic materials only. We are not responsible for it’s use.
HEALTH INFORMATION UPDATE
ALL GLAZES LISTED IN THIS CATALOG ARE LEAD-FREE. Please
refer to following guide for glaze safety information:
Non-Toxic Suitable for use by all grades
& institutions.
ADDITIONAL Health & Safety INFORMATION FOR FIRED COLORS
DINNERWARE SAFE (FOOD SAFE)
The term “Dinnerware safe” means that these glazes and underglazes
have passed tests for lead and cadmium release after being applied
and fired according to label instructions. This information is for the
consumer who uses the finished ware. Fired colors marked with an
asterisk (*) are Dinnerware safe and are safe for use on food and drink
containers when properly applied and fired.
With a few exceptions, most non-toxic glazes are safe for applications
to food and drink containers. The exceptions are non-toxic glazes,
which produce a textured or crackled surface. Food particles and
bacteria can be trapped in these porous surfaces, creating unsanitary
conditions.
6
Cautions Required. Not for use in grades
K thru 6.
BOLD - Non-Toxic Safe for all school grades and institutions.
*Ø
- Dinnerware Safe
- Non-Toxic but not recommended for food surfaces due to cracked or textured surfaces.
Glazes - AMACO
AMACO “LG” Series Gloss Glazes - C/06-04
Smooth glossy finish that flow slightly during firing while correcting most application imperfections. The vibrant colors provide a
durable, craze resistant surface that makes this series ideal for
utilitarian projects for students.or production potteries.
PintGallon
LG1 * True Black
$15.95
81.00
LG10 * Clear Transparent
11.45
42.50
LG11 * Opaque White
12.95
64.00
LG14* Gray
14.45
LG20 * Medium Blue
14.45
69.00
LG21 * Dark Blue
17.45
89.00
LG23 * Robin’s Egg Blue
14.45
LG24 * Light Blue
14.45
69.00
LG30 * Chocolate Brown
15.95
LG32* Metallic Brown
15.9581.00
LG34 * Red Brown
17.45
LG36 * Freckled Brown
17.45
LG40 * Dark Green
14.45
LG42 * Light Green
14.45
LG48 * Chrome Green
14.45
69.00
LG50* Maroon
19.75
LG51* Lilac
17.45
LG52 * Petal Pink
14.45
69.00
LG54 * Mulberry Red
17.45
LG55* Purple
19.75 98.00
LG57 * Intense Red
19.75
LG58 * Brilliant Red
19.75
98.00
LG59 * Hot Red
19.75
LG60 * Dark Yellow
14.45
LG61 * Canary Yellow
14.45
69.00
LG62 * Light Yellow
15.95
LG63 * Brilliant Yellow
14.45
LG65* Amber
17.45 85.00
LG67 * Fire Orange
19.75
98.00
LG68 * Vivid Orange
19.75
LG760* Pale Yellow 14.45
LG2 *
LG25 *
LG26*
LG27
LG44 *
LG45 *
LG46 *
Black Lustre
Turquoise Green
Turquoise
Spec. Turquoise Crackle
Olive Green
Emerald Green
Leaf Green
15.95
14.45
14.45
14.45
14.45
14.45
14.45
69.00
Amaco “F” Series Glazes Cone 05-06
Lead free, food-safe, semi-opaque & high gloss finish. F-Series
is semi-opaque and fires to a high gloss finish which makes it
ideal for dinnerware.
Pint
F1
*
Jet Black
$ 14.49
F10
*
Clear Transparent
12.45
F-10G *
Clear Transparent (Gallon)
52.00
F11
*
White
14.45 F11G *
White (Gallon)
74.00
F15
*
Warm Gray
14.45 F20
*
Light Blue
14.45
F21
*
Navy
14.45
F22
*
Royal Blue
15.45
F23
*
Vivid Blue
15.45
F25
*
Turquoise
15.45
F30
*
Chocolate
14.45 F40
*
Chrome Green
14.45 F41
*
Light Green
14.45 F42
*
Celadon
14.45
F43
*
Evergreen
14.45
F50
*
Rose
17.95
F51
*
Mauve
14.45 Amaco “F” Series Glazes - Continued
F52
*
Burgundy
F53
*
Sand
F54
*
Peach
F55
*
Pink
F57
*
Coral
F58
*
Red
F60
*
Golden Yellow
F61
*
Lemon Yellow
F65
*
Amber
F66
*
Orange
F70 *Violet
F71 *Amethyst
17.95
14.45 14.45 14.45 21.95 21.95
14.45
14.45 14.45 21.95
21.95
21.95
F26
*
F27
*
F47
14.45
14.45
14.45
Aqua
Nairobi Blue
Christmas Tree Green
AMACO Majolica Gloss Glazes (GDC)
This glaze line will be discontinued after depletion of
stock. Please check with us for availability.
All Gloss Decorating Colors are LEAD FREE and Non Toxic.
Four Techniques: One Glaze. This very unique series offers
unlimited versatility. While developed specifically to produce the
Majolica technique, these colors also perform well as a one step
decoration for bisque, can be used for overall coverage as well
as high fired on stoneware. C/05-5
GDC1*
GDC10*
GDC15 *
GDC20 *
GDC21 *
GDC25 *
GDC26 *
GDC27*
GDC28 *
GDC30 *
GDC31 *
GDC32*
GDC33*
GDC36 *
GDC38*
GDC40 *
GDC41 *
GDC42 *
GDC43*
GDC45 *
GDC47*
GDC50*
GDC51*
GDC52*
GDC53 *
GDC54*
GDC55*
GDC56*
GDC57*
GDC58*
GDC59*
GDC60*
GDC62 *
GDC63*
GDC64*
GDC65 *
Black
White
Pearl Gray
Electric Blue
Royal Blue
Baby Blue
Medium Blue
Turquoise
Teal Blue
Red Brown
Chocolate Brown
Beige
Salmon
Light Brown
Rose
Dark Green
Mint Green
Hunter Green
Chartreuse
Light Green
Avocado
Pink
Cantalope
Peach
Light Red
Red
Purple
Maroon
Lilac
Violet
Amethyst
Yellow
Deep Yellow
Orange
Straw
Real Orange
2 oz.
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
5.20
Pint
19.75
19.75
19.75
26.95
26.95
19.75
19.75
19.75
19.75
19.75
19.75
19.75
19.75
19.75
19.75
19.75
19.75
19.75
19.75
19.75
19.75
19.75
19.75
19.75
19.75
19.75
26.95
26.95
19.75
26.95
26.95
19.75
19.75
19.75
19.75
19.75 7
Glazes - AMACO
AMACO Crystaltex Glazes - Continued
Amaco Artist’s Choice Glazes - C/05
These special effects glazes imitate the Artist-Potter;s favorites.
At cone 05 oxidation, they look like high fire reduction glazes.
Pint
A-24 * Exotic Blue
9.95
A-28 * Peacock
9.95
A-34 * Sand Bar
9.95
A-43 * Green Float
9.95
A-52 * Old Brick
13.95
A-61 * Moss Brown
13.95
A-62* Camel
9.95
A-66 * Burnt Orange
13.95
A-22 * Aztec Turquoise
A-32 * Iron Saturate
A-40 * Seafoam Green
Artist’s Choice Class Pack 1 - 6 Colors Pints
Artist’s Choice Class Pack 2 - 6 Colors Pints
9.95
9.95
9.95 54.00
65.00
Most of these glazes have a high gloss iridescence similar to
mother of pearl. Most interesting over red clay.
Pint
O10
*
Transparent Pearl
13.95
O11
*
White Clover
13.95
O12 *Tawny
13.95
O30
*
Autumn Leaf
13.95
O42
*
Moss Green
13.95
O52 *Fuschia
13.95
O54
*
Dusty Rose
13.95
O57
*
Mottled Burgundy
13.95
O2
*
Black Tulip
O20
*
Bluebell O21 *Aquamarine
O23
*
Sapphire Blue O26
*
Turquoise 13.95
13.95
13.95
13.95
13.95
AMACO Crystaltex Glazes - C/06-05
These liquid glazes consist of a basic color with the addition of one or
more crystals of contrasting colors. Stir thoroughly; apply by dipping
or pouring for a more random effect or apply with a brush so that you
can place the crystals in a more controlled manner. Crystals fan out on
flat, horizontal surfaces & run on vertical pieces. Fire to C/06-05; best
results at C/05. Lead free, dinnerware-safe and NONTOXIC.
8
Sunset Jewel
Ultramarine Jewel
Tangerine Dream
Sun and Sea
Azurite
Watsonia Red
Firecracker
Buttercup
Summer Mango
Sassy Saffron
Magnolia Jewel
Purple Blaze
21.75
17.95
21.75
21.75
21.75
21.75
21.75 17.95
21.75
21.75
21.75
21.75
CTL20 *
CTL26 *
Royal Turquoise
Sea Mist
17.95
17.95
Amaco Old World Crackle Glazes - C/06-05
This glaze line will be discontinued after depletion of
stock. Please check with us for availability.
AMACO Opalescent Glazes - C/05
CTL1 *
Jet Moss
CTL3 *
Lava
CTL9 *
Snap Dragon
CTL10 *
Peppermint Ice
CTL11 *
Snow Fire
CTL12 *
Mardi Gras
CTL15 *
Moon Scape
CTL22 *
Milky Way
CTL23 *
Moody Blue
CTL30 Ø
Singed Maple
CTL31 *
Brown Earth
CTL32 Ø
Chocolate Chip
CTL34*
Granada
CTL35 *
Nutmeg
CTL36 *
Ginger Bread
CTL37 *
Desert Tortoise
CTL39 *
Yellow Universe
CTL40*
Forest
CTL41 *
Melon
CTL42 *
Fantasia
CTL43Ø
Aurora
CTL44*
Turritella
CTL45 *
CTL46 *
CTL47 *
CTL48 *
CTL49*
CTL52 Ø
CTL54 *
CTL61*
CTL67 *
CTL69 Ø
CTL70 *
CTL71 *
$
Pint
17.95
17.95 17.95 17.95
17.95 17.95
17.95
21.75
21.75
21.75
17.95 21.75
21.75
21.75 21.75 21.75
21.75
21.75
17.95 17.95 17.95
21.75
Crackle glazes produce a network of cracks on fired ware that’s
similar to crazing. To further emphasize the old or antique look,
swab the lines with colored inks. Crackle Glazes are recommended for decorative items only. Apply three crosshatched
coats over a mature Cone 04 (1971°F, 1077°C) bisque.
Code
Color
Pint
ACR10
Clear Gloss
10.95
ACR11
Satin White
10.95
ACR15
Fog Gray
10.95
ACR30
Amber
10.95
ACR31
Beige
10.95
ACR41
Leaf Green
10.95
ACR42
Celedon
10.95
ACR50
Peach
10.95
ACR51
Pink
10.95
ACR53
Light Red
16.95
ACR60
Yellow
10.95
ACR26
Aqua
10.95
AMACO Magic Flow Glazes - C/06-05
Lead Free. Magic Flow glazes are a special series, which imitates the effect of Cone 10 reduction ash glazes. The clay on
which it is used affects the unique wiggly flow of these glazes.
Apply two coats all the way to the bottom of the piece and the
third coat only to the upper half. Dry foot. Not dinnerware safe.
Pint
MF20 Dark Blue13.95
MF30 Brown13.95
MF44 Chartreuse13.95
MF46 Olive13.95
MF66 Burnt Orange13.95
MF40
Dark Green
13.95
Amaco Lustre & Metallic Glazes - C/06-05
These glazes provide the metallic look of hard steel and the high
brilliance of lustre. NON-TOXIC 4 oz.
Pint L-510 Black Onyx
5.30
L-512 Lustre Brown
5.30
L-514 Midnight Blue
5.30
L-516 Sparkling Burgundy
5.30
L-511 Lustre Green
5.30
Glazes- AMACO
Amaco Stone Texture Glazes - C/05
All colors in the Stone Texture Series are LEAD FREE.
These glazes have a smooth, unique stone-like surface when fired
over a Cone 04 bisque.
Code
Color
Pint
AST20
Blue
12.95
AST30
Rust
12.95
AST33
Straw
12.95
AST51
Peach
12.95
AST53
Ivory Beige
12.95
AST55
Lavender
12.95
AST56
Violet
12.95
AST65
Burnt Orange
12.95
AST23
AST25
AST40
AST42
Light Blue
Blue-Gray
Green
Olive
All LM Matte glazes are lead-free and food safe. Non-flowing.
Suitable for brushing, pouring, dipping and spraying.
Pint
ALM1 * Satin Black $13.45
ALM10 * Transparent Matte
13.45
ALM10G * Transparent Matte - 1 Gallon
60.00
ALM11 * Opaque White
13.45
ALM13 * Terra Cotta
13.45
ALM15 * Dove Grey
13.45
ALM16 * Elephant Hide
13.45
ALM20 * Blue Iris
13.45
ALM21 * Sky Blue
13.45
ALM25 * Robin Egg Blue
13.45
ALM30 * Cocoa Brown
13.45
ALM32 * Red Brown
13.45
ALM41* Chartreuse
13.45
ALM42 * Parakeet Green
13.45
ALM46 * Dark Green
13.45
ALM50* Burgundy
19.95
ALM52* Pink
13.45
ALM53* Orchid
13.45
ALM54* Coral
19.95
ALM56* Red
19.95
ALM58* Purple
13.45
ALM60 * Daffodil Yellow
13.45
ALM61 * Soft Yellow
13.45
ALM65* Butterscotch
19.95
ALM66* Orange
19.95
ALM67* Tangerine
13.45
ALM231 * Chestnut Brown
13.45
ALM244 * Blue Green
13.45
Amaco Textured Alligator Glazes - C/06-04
Varigated matte textures predominate at the lower temperatures
and gloss textures at high temperatures with a mingling of matte
and gloss between extremes.
Pint
ALT12 * Speckled Green
13.95
ALT13*Dalmation
13.95
ALT15 * Speckled Blue Gray
13.95
ALT17 Ø Liana Gray
19.95
ALT30 Ø Tobacco Brown
19.95
ALT32ØSandstone
19.95
ALT34 Ø Antique Brown
19.95
ALT113* Sand
19.95
ALT132 * Jewel Brown
19.95
ALT147 Ø Yellow Green
19.95
19.95
19.95
ALT3*
Old Pewter (was Gun Metal Gray) ALT16 * Green Stone
ALT22 Tahitian Blue
ALT48 Moss Agate
19.95
13.95
13.95
19.95 Amaco Raku Glazes - Cone 010-05
12.95
12.95
12.95
12.95
AMACO “LM” Matte Glazes - C /05
ALT161 Ø Tiger Eye
ALT166 Ø Mottled Orange
R-10
Clear Crackle
11.35
R-11
White Crackle
11.35
R-20
Red Crackle
16.95
R-21
Yellow Crackle
11.35
R-12 Bluebell
11.35
R-13 Smokey Blue
11.35
R-14 Smokey Lilac
11.35
R-15 Caribbean Blue
11.35
R-16 Copper Patina11.35
R-17 Tarnished Silver11.35
R-18 Lustrous Copper11.35
R-19 Copper Matte
11.35
Raku Glaze Class Packs are also available in either 6 pints or
12 pints of any of the above colors.
Amaco Arroya Glazes - C/06-05
All colors in the Arroya series are LEAD FREE and AP Non Toxic.
Cone 06-05. Arroya glazes from Amaco are textured and produce
a unique “carved” effect when fired. Designed for use over gloss
and matte unfired glazes,
Code
Color
4 oz.
SPARROYA-BK Ø
Black
3.85
SPARROYA-BR Ø
Brown
3.85
SPARROYA-WH Ø
White
3.85
SPARROYA-SBK
Ø
Soft Black
3.85
SPARROYA-SWH
Ø
Soft White
3.85
AMACO Low-Fire Texturizer
TL1PØ C/06-05 Texturizer
10.95 Pint
AMACO Dipping Glazes C/05
Code
*
*
*
*
Color
DC-10 Clear Glaze - 1 Gallon
43.95
DC-10 Clear Glaze - 5-Gal. Bucket 215.00
DW-11 White Glaze - 1 Gallon
37.95
DW-11 White Glaze - 5-Gal. Bucket 189.00
AMACO White Crawl Specialty Glaze C/05
White Crawl is a glaze that when fired will crawl into irregular
and very interesting patterns.
Pint
SPCRAWLP * White Crawl Glaze 10.95
AMACO White Pebble Specialty Glaze C/05
Pebble has a pebbly appearance as it breaks up into a pattern
resembling pearl tapioca after firing.
Pint
SPPEBBLEP * White Pebble Glaze 10.95
AMACO Overdrift Specialty Glaze C/05
Overdrift is an opaque, frosty white glaze which partially
modifies the color tint of the base glaze. It renders a cascade
of white floats when applied over or under a glaze
4 oz.
SPOVERDRIFT * Overdrift Glaze 3.90
9
Glazes - Amaco
Amaco Sahara “HF” Series Glazes Cone 4-6
AMACO Potter’s Choice Glazes - C/5-6
Matte, gloss & textured glazes for stoneware & porcelain. Experiment with thick & thin application & oxidation & reduction firings.
May be applied on greenware for single firing, though easier to
apply on bisque. See jar label.
Pint
HF1
*
Black
$ 11.95
HF9
*
Zinc-Free Clear
11.39 HF-9G *
Zinc-Free Clear (Gallon)
41.00
HF10 *
Clear
10.95 HF10G *
Clear (Gallon)
37.00
HF11 *
White
10.95
HF11G *
White (Gallon)
42.00
HF12 *
Clear Satin
11.39
HF12G *
Clear Satin (Gallon)
56.95
HF13 *
White Matt
11.39
HF13G *
White Matt (Gallon)
56.95
HF14 *
Oatmeal
11.39 HF17 *
Waxy White
11.39
HF17G *
Waxy White (Gallon)
56.95 HF18 *
Gray
11.39 HF21 *
Ultramarine Blue
11.39
HF22 *
Textured Blue
11.39
HF23 *
Textured Gray Blue
11.39 HF24 *
Teal Blue
11.39 HF30 *
Brown
11.39 HF31 *
Rust Brown
11.39 HF32 *
Textured Tan
11.39
HF36 *
Textured Amber Brown
11.39
HF37 *
Textured Amber
11.39 HF50 *
Glossy Burgundy
15.95
HF51 *
Peach
11.39 HF52 *
Hazy Pink
15.95
HF53 *
Lavender
15.95 HF54 *
Purple
15.95 HF55 *
Coral Gloss
23.95 HF56 *
Red Gloss
23.95 HF57 *
Coral Matt
23.95 HF58 *
Red Matt
23.95 HF60 *
Yellow
11.39 HF62 *
Matte Yellow Oatmeal
11.39
HF63 *
Textured Almond
11.39
LEAD FREE - A collection of potters’ favorite glazes made easy.
To achieve Cone 10 reduction effects without having to have a
reduction
gas kiln.
PintGallon
PC12 * Blue Midnight
10.35
51.95
PC20 * Blue Rutile
10.35
51.95
PC21 * Arctic Blue
10.35
51.95
PC23 * Indigo Float
10.35
51.95
PC27 *Tourmaline
10.35
51.95
PC28 * Frosted Turquoise
10.35
51.95
PC29 * Deep Olive Speckled
10.35
51.95
PC30 *Temmoku
10.35
51.95
PC32 * Albany Slip Brown
12.95
72.00
PC33 * Iron Lustre
10.35
51.95
PC34 * Light Sepia
10.35
51.95
PC35 * Oil Spot
10.35
51.95
PC36 *Ironstone
10.35
51.95
PC37 * Smoked Sienna
10.35
51.95
PC39 * Umber Float
10.35
51.95
PC43 * Toasted Sage
10.35
51.95
PC50 *Shino
10.35
51.95
PC52 * Deep Sienna Speckle 10.35
51.95
PC53 * Ancient Jasper
10.35
51.95
PC55 * Chun Plum
12.95
72.00
PC57 * Smokey Merlot
13.4572.00
PC59 * Deep Firebrick
10.35
51.95
PC60 * Salt Buff
10.35
51.95
HF26* Turquoise
HF41 *
Dark Green
11.39
11.39
Amaco Celebration “HF” Series Glazes
Cone 4-6
A beautiful group of bright and colorful glazes for stoneware that
are as colorful as earthenware glazes.
Pint
HF-115 *
Light Gray
17.45
HF-120 *
Dark Blue
23.95
HF-125* Turquoise13.45
HF-127 *
China Blue
23.95
HF-128* Teal
17.45
HF-129 *
Baby Blue
13.45
HF-133 *
Deco Brown
13.45
HF-134* Straw
13.45
HF-140* Green
10.95
HF-142* Chartreuse
17.45
HF-159* Burgundy
17.45
HF-161 *
Bright Yellow
17.45
HF-164* Pink
13.45
HF-165 *
Scarlet Red
23.95
HF-166* Orangerie
23.95
HF-167* Clementine
23.95
HF-170* Lilac
17.45
HF-171* Amythest
23.95
10
PC1
PC2
PC4
PC25
PC40
PC41
PC42
PC46
PC48
PC49
* Saturation Metallic
* Saturation Gold
*Palladium
* Textured Turquoise
* True Celadon
* Verte Lustre
* Seaweed
* Lustrous Jade
* Art Deco Green
* Frosted Mellon
18.95
10.35
10.35
10.35
10.35
10.35
10.35
10.35
13.45
10.35
94.00
51.95
51.95
51.95
51.95
51.95
51.95
51.95
72.00
51.95
AMACO Pompeian Ash Glazes - C/5-6
Lead Free. Pompeian Ash glazes have a unique formula that
produces a wiggly design pattern as they flow on the piece. Similar to ash glazes that have to be fired to Cone 10. Apply these
glazes by brushing or dipping. Taper down the application to one
coat towards the bottom of the piece. Fire with a dry foot. Not
dinnerware safe.
Pint
PA1Ø Black14.95
PA15Ø Buff11.35
PA20Ø Blue11.35
PA60Ø Tan
11.35
PA30
PA40
Brown
Green
AMACO High-Fire Texturizer
14.95
11.35
Pint
TH1P Ø Rutile based - yellow/orange crystal type textrue9.35
Non-Toxic Suitable for use by all grades
& institutions.
Cautions Required. Not for use in grades K-6.
BOLD - Non-Toxic Safe for all school & institutions.
* Dinnerware Safe
Ø - Non-Toxic but not recommended for food surfaces due to cracked or textured surfaces.
Glazes - Duncan
Duncan Clear Dipping Glazes
CN2000D-28 Clear Dipping Glaze/1 Gal.
CN2000D-3.5 Clear Dipping Glaze/3.5 Gal.
PURDG
Pure Brilliance Dipping/1 Gal.
PURDG-3
Pure Brilliance Dipping/3.5 Gal.
Duncan Clear Brushing Glazes
IN1001
IN1001P
IN1001G
IN1001G-3
PURB4
PURBP
PURBG
PURBG-3
SN351
SN351P
SN361G
Duncan Infinity Clear/4oz.
Duncan Infinity Clear/Pint
Duncan Infinity Clear/Gallon
Duncan Infinity Clear/3.5 Gallons
Pure Brilliance Brushing/4 oz.
Pure Brilliance Brushing/Pint
Pure Brilliance Brushing/Gallon
Pure Brilliance Brushing/3.5 Gallons
Duncan SN Clear/4oz.
Duncan SN Clear/Pint
Duncan SN Clear/Gallon
29.75
81.00
29.75
83.25
2.65
8.40
29.75
83.25
2.65
8.40
29.75
83.25
2.65
8.40
29.75
Duncan Envision “IN” Glazes
Envisions move very little during firing so apply with smooth even
strokes. Envisions reds and greens can be fired together. All are
safe for use on food containers. Refer to label for instructions on
application, firing and usage. NONTOXIC. C/06
4 oz.
Pint Gallon
IN1001
* Clear Glaze
$2.65 $8.40 $29.75
IN1001G-35* Clear Glaze - 3.5 Gallon Bucket 83.25
IN1002
* Nordic Light
4.40 13.45
IN1003
* Sun Yellow
4.40 13.45
IN1004
* Sunset Red
4.40 13.45
IN1005
* Ruby Red
4.40 13.45
IN1006 *Tearose
4.40 13.45
IN1007
* Carnation Pink
4.40 13.45
IN1009
* Cherry Red
4.40 13.45
IN1010
* Plum Blush
4.40 13.45
IN1011
* Royal Purple
4.40 13.45
IN1012 *Orchid
4.40 13.45
IN1013
* Denim Blue
4.40 13.45
IN1014
* Galaxy Blue
4.40 13.45
IN1015
* Caribbean Blue
4.40 13.45
IN1016 *Peacock
4.40 13.45
IN1017
* Sea Mist Green
4.40 13.45
IN1018 *Celadon
4.40 13.45
IN1019
* Holiday Green
4.40 13.45
IN1021
* Terra Cotta
4.40 13.45
IN1022
* Peach Blush
4.40 13.45
IN1023
* Butter Toffee
4.40 13.45
IN1026
* Very Black
4.40 13.45 90.00
IN1027
* Spiced Cream
4.40 13.45 90.00
IN1028
* Grey Spice
4.40 13.45
IN1029 *Tweed
4.40 13.45
IN1030 *Cornmeal
4.40 13.45
IN1031
* Antique Peach 13.45
IN1032
* Miami Pink
4.40 13.45
IN1033 *Bluebonnet
4.40 13.45
IN1034 *Larkspur
4.40 13.45
IN1035
* Rain Tree Green
4.40 13.45
IN1036 *Bluegrass
4.40 13.45
IN1037
* Leaf Green
4.40 13.45
IN1038 *Parchment
4.40 13.45
IN1039
* Mocha Cream
4.40 13.45
4 oz.
Pint Gallon
IN1040
* Mocha Spice
4.40 13.45
IN1042 *Grey
4.40 13.45
IN1043 *Driftwood
4.40
IN1044
* Sand Diego
4.40 13.45
IN1047
* Roasted Pepper
4.40
IN1048 *Delphinium
4.40 13.45
IN1049
* Sand Bar
4.40
IN1050 *Oregano
4.40
IN1051
* Paprika Cream
4.40
IN1052
* Sage Brush
4.40
IN1053 *Harvest
4.40 13.45
IN1055 *Grape
4.40
IN1056
* Aqua Fresca
4.40 13.45
IN1057
* Iced Mint
4.40 13.45
IN1058 *Clover
4.40 13.45
IN1059
* Light Pink
4.40 13.45
IN1060
* Bright Wine
4.40 13.45
IN1061
* Light Kelp
4.40 13.45
IN1062
* Light Kiwi
4.40 13.45
IN1064
* Baby Blue
4.40 13.45
IN1065
* LIght Turquoise
4.40 13.45
IN1066
* Blueberry Spice
4.40 13.45
IN1067
* Grape Spice
4.40 13.45
IN1068
* Ocean Mist
4.40 13.45
IN1071 *Lemon
4.40 13.45
IN1072
* Baroque Gold
4.40 13.45
IN1073 *Strawberry
4.40 13.45
IN1074 *Cranberry
4.40 13.45
IN1075
* Cobalt Blue
4.40 13.45
IN1076
* Federal Blue 13.45
IN1078
* Key Lime
4.40 13.45
IN1079 *Turquoise
4.40 13.45
IN1081 *Cocoa
4.40 13.45
IN1082
* Chocolate Brown
4.40 13.45
IN1083 *Honeysuckle
4.40 13.45
IN1100 *White
4.40 13.45 90.00
IN1105
* Federal Blue
4.40
IN1116
* Emerald Bay
4.40
IN1201
* Neon Yellow
4.40 13.45
IN1202
* Neon Blue
4.40 13.45
IN1203
* Neon Chartreuse
4.40 13.45
IN1204
* Neon Orange
4.40 13.45
IN1205
* Neon Green
4.40 13.45
IN1206
* Neon Red
4.40 13.45
IN1603 *Autumn
4.40 13.45 90.00
IN1609
* Emerald Green
4.40 13.45
IN1613 *Black
4.40 13.45 90.00
IN1626
* Royal Ruby
4.40
IN1627
* Clear Black
4.40 13.45
IN1629
* Ivory Belleek
4.40 13.45
IN1634
* Royal Blue
4.40 13.45 90.00
IN1639
* Apple Green
4.40
IN1640
* Foliage Green
4.40 13.45
IN1653
* Downright White
4.40 13.45 90.00
IN1666
* Walnut Brown
4.40 13.45
IN1667 *Caramel
4.40 13.45
IN1669
* Bottle Green
4.40 13.45 90.00
IN1670
* Sun Yellow
4.40 13.45
IN1673 *Espresso
4.40 13.45
IN1679
* Royal Danish
4.40 13.45
IN1781
* Pumpkin Orange
4.40 13.45 90.00
IN1207
* Neon Red Sprinkles 4.40 13.45
IN1208
* Neon Orange Sprinkles 4.40 13.45
11
Glazes - Duncan
Duncan Envision “IN” Glazes (Continued)
4 oz.
IN1209
* Neon Yellow Sprinkles 4.40
IN1210
* Light Kiwi Sprinkles 4.40
IN1211
* Neon Blue Sprinkles 4.40
IN1212
* Cobalt Blue Sprinkles 4.40
IN1213
* Orchid Sprinkles
4.40
IN1214
* Honeysuckle Sprinkles4.40
IN1215
* White Sprinkles
4.40
IN1216
* Very Black Sprinkles 4.40
IN1603 *Autumn
4.40
IN1609
* Emerald Green
4.40
IN1613 *Black
4.40
IN1626
* Royal Ruby
4.40
IN1627
* Clear Black
4.40
IN1629
* Ivory Beleek
4.40
IN1634
* Royal Blue
4.40
IN1639
* Apple Green
4.40
IN1640
* Foliage Green
4.40
IN1653
* Downright White
4.40
IN1666
* Walnut Brown
4.40
IN1667 *Caramel
4.40
IN1669
* Bottle Green
4.40
IN1670
* Sun Yellow
4.40
IN1673 *Espresso
4.40
IN1679
* Royal Danish
4.40
IN1781
* Pumkin Orange
4.40
IN1950
* Indian Summer
4.40
Pint Gallon
13.45
13.45
13.45
13.45
13.45
13.45
13.45
13.45
Duncan Courtyard Glazes (Continued)
CY119 * Golden Horizon
CY120 * Harvest Plains
CY121* Molasses
CY122 * Rustic Sunset
CY123 * Rich Rust
CY124* Fireluster
4 oz.
4.35
4.35
4.35
4.35
4.35
4.35
Pint
12.85
Duncan Renaissance Glazes - Cone 5/6
13.45 90.00
13.45 90.00
This line of unique glaze colors provides limitless opportunities to embrace the rustic,k ancient, historical and artistic
perspectives of the 16th century. Unique and unexpected
color breaks.
13.45
8 oz.
Pint
13.45
RG701 * Vintage Blu
7.75
11.95
13.45 90.00
RG702 * Antique Celedon
7.75
11.95
RG703 * Rustic Mustard 7.7511.95
13.45
RG704 * Shino Cream 7.7511.95
13.45 90.00
RG705 * Brone Patina
7.7511.95
13.45
7.7511.95
13.45 RG706 * Frosted Brick
RG707 * Deep Sea Treasure
7.7511.95
13.45 90.00
RG708 * Pastel Peach
7.7511.95
13.45
RG709 * Sepia Brown
7.7511.95
13.45
RG710 * Buff Clay
7.7511.95
13.45
RG711 * Burnt Apricot
7.7511.95
13.45 90.00
RG712 * Smoked Cinnamon
7.7511.95
13.45
RG713 * Spiced Cream
7.7511.95
RG714 * Pistachio Nut
7.7511.95
RG715
*
Heirloom
Blue
7.7511.95
Duncan Crackle Glazes
RG716* Henna
7.7511.95
Use them to add character to your pieces; these specially formuRG717* Indigo
7.7511.95
lated glazes create cracks similar to crazing when fired, resulting
RG718
*
Mottled
Teal
7.7511.95
in a distinctive aged, antique look. For extra depth, highlight
RG719 * Rutile Haze
7.7511.95
the cracks created in the firing by antiquing the piece with ink or
RG720 * Burnt Jade
7.7511.95
acrylic paint.
RG721 * Opal Lustre
7.7511.95
4 0z.
Pint
RG722 * Sea Glass
7.7511.95
CR800ØClear
3.8511.90
RG723 * Melted Caramel
7.7511.95
CR821ØParchment Crackle
3.8511.90
RG724* Buttermilk
7.7511.95
CR822ØMocha Cream Crackle
3.8511.90
CR823ØCeladon Crackle
3.8511.90
Duncan Crystals™ Glazes
Duncan Courtyard Glazes
These unique, self-antiquing, lead-free matte glazes result in rich
varied color with no two firings giving exactly the same results.
C/06 to C/6
CY102* Sagebrush
CY103 * Desert Pine
CY104 * Mediterranean Olive
CY108 * Cactus Sand
CY110 Ø Iron Ore
CY112 * Saddle Clove CY113 * Hearthstone
CY116 * Lava Slate
CY117* Sand
CY118 * Pumpkin Spice
12
4 oz.
4.35
4.35
4.35
4.35
4.35
4.35
4.35
4.35
4.35
4.35
Pint
12.85
12.85
12.85
12.85
12.85
12.85
12.85
12.85
12.85
12.85
With Crystals™ Glazes, color crystals move throughout the
glaze during firing, creating a distinctively interesting appearance. Each result depends on the size of the crystal, slope of
the piece and temperature of the fire. Like the excitement of
fireworks festivities, you’ll love the pops of color from Crystals™
Glazes!
Code
Color
CR850*Cumulus Cloud
CR851**Eternal Galaxy
CR852**Solar Flares
CR853**Sailor’s Delight
Code
Color
CR854**Outer Space
CR855**Water Lily Marsh
4 oz.
Pint
5.6517.45
5.6517.45
5.6517.45
5.6517.45
4 oz.
Pint
5.6517.45
5.6517.45
Glazes - Duncan
Duncan Crystals™ Glazes (Continued)
SN366 *Black
5.6515.60
SN367 * Banana Cream
5.65 15.60
CR856**Ancient Woodland
5.6517.45
SN368
* Rose Petal
5.65
CR857*Alpine Meadow
5.6517.45
SN370
* Ice Blue
5.65
CR858*Polynesian Lagoon
5.6517.45
SN371
* Key Lime
5.65
CR859*African Savanna
5.6517.45
SN372
* Red Velvet
5.65 15.60
CR901Ø
Waterfall5.65
17.45
SN373
* Midnight Blue
5.65
CR902Ø
Night Sky5.65
17.45
SN374
* Neon Yellow
5.65 15.60
SN375
* Neon Orange
5.65
CR903Ø
Emerald Falls5.65
17.45
SN376
*
Neon
Red
5.65
15.60
CR904Ø
Fudge Marble5.65
17.45
SN377
*
Neon
Blue
5.65
CR905*Blueberries5.65
17.45
SN378
* Neon Chartreuse 5.65
CR906*Peppered Raspberry5.65 17.45
SN379
* Neon Green
5.65
CR907Ø
La Fiesta5.65
17.45
SN380
* Neon Purple
5.65
CR908Ø
Monet’s Garden5.65
17.45
CR909
* Moss Green
5.65
17.45
CR910*Forest Moss5.65
17.45
Duncan Specialty “SY” Products
CR911Ø
Ocean Mist5.65
Patch-A-TatchNON-TOXIC
CR912Ø
Spring Meadow5.65
17.45
A
ceramic cement used to attach or repair greenware or bisque.
CR913Ø
Cranberry Frost5.65
17.45
SY545
*
4 oz. $3.05
CR914Ø
Grape Splash5.65
17.45
CR915Ø
Night Frost5.65
17.45
Snow NONTOXIC
CR916Ø Holly Berries
5.65
Produces thick, fluffy white “snow,” fur areas on animals & trims.
CR917Ø Caramel Latte
5.65
Forms a beautiful snowy background for E-Z strokes. Use on
CR918Ø Cherry Blossoms5.65
17.45
bisque or over unfired glaze which has been applied to bisque.
SY546 *
4 oz. $3.50
Pint $11.00
CR919Ø
Milky Way5.65
17.45
Code
Color
4 oz.
Pint
Wax Resist
A wax emulsion used under or between glazes for design work or
CR920Ø
Water Lillies5.65
17.45
special effects. The wax is burned off in firing leaving the basic
CR921Ø Glacier Storm
5.65
color or design visible.
CR922 *Eruption
5.65 17.45
SY547
2 oz. $2.50
CR923
* Raspberry Lemonade 5.65
17.45
CR924
* Wildflower Bouquet
5.65
17.45
Mask ‘n PeelDO NOT FIRE
CR925
* Independence Day
5.65
17.45
Water Soluble. For protecting design areas & making applicaCR926
* Sandy Beach
5.65
17.45
tion of background colors faster & easier. Use under or between
underglazes, glazes or water-based stains on greenware or
CR927
* Hawaiian Sand
5.65
17.45
bisque. Remove after covering color is dry, leaving base color
CR928
* Paradise Punch
5.65
17.45
or design visable.
CR929
* Orange Crush
5.65
17.45
SY548 Mask ‘n Peel
2 oz.
$2.50
CR930
* Tutti Fruitti
5.65
17.45
CR931 *Appletini
CR932
* Blueberry Bubblegum
CR933 *Fireworks
CR934 *Funfetti
CR935
* Muddled Mint
CR20075* Dalmation
CR20088 * Blueberry Ice
5.65 17.45
5.65
17.45
5.65 17.45
5.65 17.45
5.65
17.45
5.65
17.45
5.6517.45
Duncan Antique Metallic Glazes
Fires to a metallic finish at C/04.
4 oz.
SY1024 Ø Antique Pewter
SY1025
Ø Heirloom Silver
SY1026 Ø Modern Brass
Duncan Satin “SN” Glazes
Satin Glazes are so named because of their soft, muted sheen.
They move very little during firing making them ideal for creative design work and controlled glazing techniques. Most
Satin Glazes are opaque but some are transparent and can
be used over underglazes. All are NONTOXIC and safe for
use on food containers. Refer to label for instructions on
application, firing and usage. C/06
4 oz.
Pint Gallon
SN351
* Clear
2.65 8.4029.75
SN351G-35 * Clear - 3.5 Gallon bucket 83.25
SN352 *White
5.6515.60
SN355
* Orange Fizz
5.65 15.60
SN361
* Christmas Green 5.65
4.10
4.10
4.10
Non-Toxic Suitable for use by all grades
& institutions.
Cautions Required. Not for use in grades
K thru 6.
BOLD - Non-Toxic Safe for all school grades and institutions.
*Ø
- Dinnerware Safe
- Non-Toxic but not recommended for food surfaces due to cracked or textured surfaces.
13
Glazes - Mayco
Mayco Foundations Opaque
This newest gloss glaze line has been expanded to include new fun,
contemporary colors as well as some of your Series 2000 favorites such
as Glade Green, Wisteria Purple and Rich Chocolate.
• Glaze layering and glaze combinations
• Use with Stroke & Coats® to create design
• Easy to apply; dries quickly
• Fires to a smooth, level finish
• Non-toxic and food safe
MFN001*
MFN002*
MFN003*
MFN004*
MFN005*
MFN006*
MFN007*
MFN008*
MFN009 *
MFN010*
MFN011*
MFN012*
MFN013*
MFN014*
MFN015*
MFN016*
MFN017*
MFN018*
MFN019*
MFN020*
MFN021*
MFN022 *
MFN023 *
MFN024*
MFN025*
MFN026*
MFN027*
MFN028*
MFN029*
MFN030*
MFN031*
MFN032*
MFN033*
MFN034*
MFN035*
MFN036*
MFN037*
MFN038*
MFN039*
MFN040*
MFN041 *
MFN042 *
MFN043 *
MFN044 *
MFN045*
MFN046*
MFN047 *
4oz. PintsGallons
White
4.40 11.5077.25
`Yellow
4.40 11.5077.25
Orange
4.40 11.5077.25
Red
4.40 11.5077.25
Pink
4.4011.50
Blue
4.40 11.5077.25
Green
4.40 11.5077.25
Brown
4.40 11.5077.25
Black
4.40 11.5077.25
Tree Green
4.40 11.5077.25
Light Blue
4.40 11.5077.25
Lavender
4.4011.50
Light yellow
4.40 11.50
Antique White 4.40 11.50
Brick Red
4.4011.50
Harvest Orange 4.40
11.50
Purple
4.40 11.5077.25
Bright Blue
4.40 11.5077.25
Dark Blue
4.4011.50
Medium Green 4.40
11.50
Olive Green
4.40 11.50
Tan
4.4011.50
Cinnamon
4.4011.50
Gray
4.4011.50
Raspberry Whip 4.40
11.50
Salmon Mousse 4.4011.50
Glade Green
4.40 11.50
Wisteria Purple 4.4011.50
Rich Chocolate 4.40
11.50
Bing Cherry
4.40 11.50
Corn Flower Blue4.40 11.50
Canton Jade
4.40 11.50
Mediterranean Teal4.40 11.50
Big Sky Blue
4.40 11.50
Deep Red
4.4011.50
Grape
4.4011.50
Chartreuse
4.4011.50
Sand
4.4011.50
Light Gray
4.4011.50
Pumpkin
4.4011.50
Medium Blue
4.4011.50
Teal Blue
4.4011.50
Bright Jade
4.4011.50
Yellow-Orange 4.4011.50
Taupe
4.4011.50
Sage
4.4011.50
Light Pink
4.4011.50
MFNKIT3 Foundations Assortment - 12 4oz bottles
45.00
MFNKT3/P Foundations Assortment - 12 Pint bottles 125.00
MFNKT6/P Foundations Assortment - 6 Pint bottles 62.00
14
Foundations Sheer
These gloss translucent colors are wonderful for glaze layering and
adding color dimension to your creations. The assortment includes
many colors from the Series 2000 palette such as Aztec Jade, Yadro
and Lustre Green as well as new jewel tones like Saffire Blue. Non-toxic
and food safe.
MFN201*
MFN202*
MFN203*
MFN204*
MFN205*
MFN206*
MFN207*
MFN208 *
MFN209*
MFN210*
MFN211*
MFN212*
MFN213*
MFN214*
MFN215*
MFN216*
MFN217*
MFN218*
MFN219*
MFN220*
MFN221*
MFN222 *
MFN223*
MFN224 *
MFN225*
MFN226 *
MFN227*
4oz.
PintsGallon
Golden Clear
4.40
11.50
Yadro
4.40
11.50
Dry Champagne
4.40
11.50
Mudpuddle Brown
4.40
11.50
Saddle Tan
4.40
11.50
Lemon Ice
4.4011.50
Orange Slice
4.40
11.50
Crystal Coral
4.40
11.50
Floral Pink
4.40
11.50
Victorian Red
4.40
11.50
Sheer Blue
4.40
11.50
Blue Diamond 4.4011.50
Saffire Blue
4.4011.50
Pastel Jade
4.40
11.50
Aztec Jade
4.40
11.50
Sea Glass
4.4011.50
Evergreen Fir 4.4011.50
Green Sapphire
4.40
11.50
Lustre Green
4.40
11.50
77.25
Sooty Grey
4.40
11.50
Milk Glass
4.4011.50
Indigo
4.40
11.50
Amethyst
4.40
11.50
Key Lime
4.40
11.50
Watermelon
4.40
11.50
Squash Blossom
4.40
11.50
Celery
4.40
11.50
Foundations Matte
These matte glazes are friendly to the user with easy application and
great results. The matte satin finish is extraordinary. Use Stroke &
Coats® over Foundations Matte (formerly Series 2000) for design,
contrast and drama. Non-toxic and food safe.
MFN301 *
MFN302 *
MFN303 *
MFN304*
MFN305 *
MFN306 *
Marshmallow White
Ivory Cream
Deep Sea Blue
Black Velvet
Milk Chocolate
Pumpkin Tart
4oz. Pints Gallons
4.4011.50 77.25
4.4011.50 77.25
4.4011.50
4.4011.50
4.4011.50
4.4011.50 77.25
Mayco Classic Crackle “CC” Glazes
Crackles are perfect for home decor items such as vases, candle
holders & more. Not recommended for dinnerware, the cracks can trap
bacteria.
MCC101Ø
Transparent
MCC102Ø
White
MCC107Ø
Green Tea
MCC108Ø
China Sea
4 oz.
Pint
3.8511.60
3.8511.60
3.8511.60
3.8511.60
Glazes - Mayco
Mayco Astro Gem “AG” Glazes
Astro Gem Glazes are the leading textural glazes on the market today.
They produce a non-reflective textured surface. Apply to greenware for
one-fire process. NONTOXIC but not recommended for food surfaces
due to textural surface. C/06
MG510Ø White Opal
MG512Ø Black Diamond
MG513Ø Golden Sand
4 oz.
5.25 5.25
5.25
pint
15.95 Mayco Jungle Gem Crystal “CG” Glazes
Crystal Glazes produce exciting multicolor effects from one jar. Glazes
consist of a colored base glaze with varying size crystals of contrasting
colors. Ideal for vertical surfaces, overall coverage or accent decororating. NON-TOXIC but not recommended for food surfaces. C/06
MCG707ØWoodland Fantasy
MCG713ØPeacock Green
MCG716ØPagoda Green
MCG717ØPistachio
MCG718ØBlue Caprice
MCG722ØSeawind
MCG750ØNoel
MCG753ØSassy Orange
MCG756ØFirecracker
MCG768ØPurple Sage
MCG772ØSand Petal
MCG779ØBlack Opal
MCG780ØMystic Jade
MCG783ØStrawberry Sundae
MCG785ØRoyal Fantasy
MCG786ØObsidian
MCG788ØDutch Enamelware
MCG793ØBeach Pebbles
MCG795 Ø Yadro Print
MCG798 Ø Black Iris
MCG958Ø
Lagoon Blue
MCG961Ø
Evergreen
MCG962Ø
Blue Azure
MCG963Ø
Lemon Lime
MCG964Ø
Kaleidoscope
MCG965Ø
Mocha Marble
MCG966Ø
Tiger Lily
MCG967Ø
Green Agate
MCG968Ø
Peppermint Twist
MCG969Ø
Floral Fantasy
MCG970Ø
Masquerade
MCG971Ø
Purple Cosmos
MCG972Ø
Dragon’s Breath
MCG973Ø
Alligator
MCG974Ø
Bloomin’ Blue
MCG975Ø
Sky Diamonds
MCG976Ø
Teal Drop
MCG977Ø
Ink Spots
MCGKIT1
MCGKIT2
4 oz.
Pint
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.75
17.45
5.7517.45
5.75
17.45 5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
Jungle Gems Kit 12 - 4oz. Jars
Jungle Gems Kit 12 - Pint Jars
62.00
188.00
Mayco Crystalites Glazes
Crystallite Glazes create wonderfully unique effects. No two pieces are
exactly alike. Colors can be mixed for additional effects. NONTOXIC but
not recommended for food surfaces.C/06
MG2701ØPeacock Eyes
MG2702ØNorthern Lights
MG2703ØBerryberry Pie
MG2704ØPlum Jelly
MG2705ØDesert Mist
MG2706ØSpiced Banana
MG2707ØLily Jade
MG2708ØOriental Carmel
MG2709ØCappuccino Mint
MG2711ØTahiti Grape
MG2712ØMonsoon Seas
MG2713ØButtercup Blue
MG2714ØHerb Garden
MG2715ØSpotted Kiwi
MG2716ØCelestial Blue
MG2718ØCosmic Black
MG2719ØCranberry Burst
MG2723ØGrape Divine
MG2724ØLotus Blossom
MG2725ØSafari
MG2726ØCheetah
MG2727ØPoppy Fields
MG2728ØPoinsettia
MG2729ØCitrus Splash
MG2730ØRed Halo
MG2731ØKaboom
MG2732ØSedona Sky
4 oz.
Pint
$5.75$17.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
4oz.
Pints
5.7517.45
5.7517.45
5.7517.45
5.7517.45
5.7517.45
MG2700 Crystallite Kit 12 4-oz. jars
MG2700P Crystalite Kit 12 Pint Jars
62.00
188.00
Mayco Elements NONTOXIC Glaze
New NONTOXIC glazes in natural earth tones. Surfaces vary from
gloss to matte with subtle variations in each color.
MEL101*Oyster Shell
MEL102*Sandstorm
MEL103*Sea Spray
MEL104*Heather Moor
MEL105*River Birch
MEL106*Tidal Pool
MEL107*Amber Ash
MEL108*Jade Moss
MEL109*Blue Ridge
MEL110*Mudslide
MEL111*Ruby Creek
MEL112*Tornado Sky
MEL113 * Spanish Moss
MEL114*Copper River
MEL115 * Iron Moss
MEL116*Blue Stone
MEL117*Waterfall
MEL118*Blue Grotto
MEL119*Burnished Steel
MEL120* Black Ice
MEL121*Copper Adventurine
4 oz
$4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 Pint
$12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
15
Glazes - Mayco
Mayco Elements (Continued)
MEL122*Malachite
MEL123*Patina
MEL124*Stormy Blue
MEL125*Sahara Sands
MEL126*Coral Reef
MEL127*Rose Granite
MEL128*Wheat
MEL129*Slate
MEL130*Sea Green
MEL131*Turtle Shell
MEL132*Rust Red
MEL133*Autumn
MEL134*Mirror Blue
MEL135*Rare Earth
MEL136*Lapis Lagoon
MEL137*Black Adventure
4 oz
4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 4.25 Pint
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
12.95
MELKIT1 * Element & Chunky Assortment 46.00
MELKIT2* Element & Chunky Assortment
188.00
Mayco Elements Chunkies
Element Glazes now come with crystals. During firing, the crystals
spread out to produce a burst of color to create a truly unique look. No
two pieces will ever be alike, as the shape of the piece, glaze application,
firing temperature and kiln load all affect final glaze surface.
MEL201 Ø River Bottom
MEL202 Ø Bark
MEL203 Ø Coal Dust MEL204 Ø Glowing Embers
MEL205 Ø Jade Pebble
MEL206 Ø Meteor Shower
MEL207 Ø Gold Mine
MEL208 Ø Moss Creek
MEL209 Ø Night Sky
MEL210ØBayou Rain
MEL211ØVolcanic Glow
4 oz.
Pint
5.2015.80
5.2015.80
5.2015.80
5.2015.80
Mayco Raku Glazes
Raku firings are exciting and dramatic. Mayco’s Raku glazes are NONTOXIC formulations, performing with consistent results. The product
assortment includes metallized, crackle and brilliant finishes. See product lables for complete instructions. Packaged in wide-mouth pint jars.
MRK100
Ø Black Metallic
MRK101
Ø Copper Metallic
MRK102
Ø Patina Metallic
MRK103
Ø White Crackle
16
Mayco takes the mystery out of crystalline glazes. This innovative process allows the artist to produce beautiful macro-crystalline structures
in every firing. The crystalline pattern is created by applying SeedingMedia in a wash or pinpoint pattern over the Engobe, and applying the
Crystalline Clear over the entire piece. Using an kiln with an electronic
controller, follow the suggested firing program for great results. See
product lables for complete instructions. MCRKIT Crystalline Kit
containes MCR100, MCR201 and MCR301.
4 oz.
pint
MCR100* Crystalline Clear 10.25
MCR201* Dark Blue Engobe 10.25
MCR202* Light Blue Engobe 10.25
MCR203* White Engobe10.25
MCR204* Black Engobe10.25
MCR205* Pink Engobe10.25
MCR301* Seeding Media3.60
MCRKIT* Crystalline Kit - 25.00 each
Mayco Non-Toxic Specialty Glazes Cone 06
These NON-TOXIC, Cone 06 glazes provide a wide variety of special
1.25oz.
4 oz.
Pint
MSG201ØBlack Cobblestone 3.4510.45
MSG202ØWhite Cobblestone 3.4510.45
MSG302ØSnowfall 3.7511.60
MSG401ØDesigner Liner4.25
MSG501ØSculpting Medium 3.9512.25
Mayco Stroke “N Coat Wonderglaze
These glazes produce special effects when used in combination with
other non-toxic glazes. Apply Cascade over or under non-toxic glaze to
create flowing spectacular effects.
Clear Cascade
White Cascade
Amber Cascade Black Cascade
Mayco Crystalline Glazes
4 oz.
Pint
5.7517.45
5.7517.45
5.7517.45
5.7517.45
Mayco Clear Glazes Cone 06
5.7517.45
Clear glazes are food safe and produce the highest gloss finish
5.7517.45
possible. C/06
5.7517.45
4 oz Pint Gallon 3-Gal.
5.7517.45
MG300* Matte Transparent 2.50 7.85 27.50
5.7517.45
MG2000* Crystal Clear Dipping
27.50 68.50
5.7517.45
MG2101* Crystal Clear Brushing2.50 7.85 27.50 68.50
5.7517.45
MGCLR-3* Clear One Dipping 63.00
Mayco Pottery Cascades
MPC601 Ø
MPC602 Ø
MPC603 Ø
MPC604 Ø
Pint
MRK104 ØRed
11.50
MRK105
Ø Copper Penny
11.50
MRK106
Ø Peacock Matte
11.50
MRK107
Ø Oil Slick
11.50
Pint
$11.50
11.50
11.50
11.50
One fire decorating and glazing on your bisque pieces.
NONTOXIC. C/06
MSC01 * Pink-A-Boo
MSC02 * Melon-Choly
MSC03 * Wine About It
MSC04 * Salsa
MSC05 * Tiger Tail
MSC06 * Sunkissed
MSC07 * Leapin’ Lizard
MSC08 * Just Froggy
MSC09 * Jaded
MSC10 * Teal Next Time
MSC11 * Blue Yonder
MSC12 * Moody Blue
MSC13 * Grapel
MSC14 * Java Bean
MSC15 * Tuxedo
MSC16 * Cotton Tail
MSC17 * Cheeky Pinky
MSC18 * Rosey Posey
MSC20 * Birthday Suit
MSC22 * Carrot Top
MSC23 * Jack O’Lantern
2 oz. $3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50
3.50 3.50 3.50 3.50 3.50 3.50 3.50 8-oz. $9.20 9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
Pint
$17.40
17.40
17.40
17.40 17.40
17.40
17.40 17.40 17.40 17.40 17.40
17.40 17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
Glazes - Mayco
Mayco Stroke & Coat Wonderglaze (Continued)
MSC24 * Dandelion
MSC25 * Crackerjack
MSC26 * Green Thumb
MSC27 * Sour Apple
MSC28 * Blue Isle
MSC29 * Blue Grass
MSC30 * Blue Dawn
MSC31 * The Blues
MSC32 * Bluebeard
MSC33 * Fruit of the Vine
MSC34 * Down To Earth
MSC35 * Gray Hare
MSC36 * Irish Luck
MSC37 * Ivory Tower
MSC39 * Army Surplus
MSC40 * Blueberry Hill MSC41 * Brown Cow
MSC42 * Butter Me Up
MSC43 * Lettuce Alone
MSC45 * My Blue Heaven
MSC46 * Rawhide
MSC48 * Camel Back
MSC50 * Orange Ya Happy
MSC51 * Poo Bear
MSC52 * Toad-aly Green
MSC53 * Purple Haze
MSC54 * Vanilla Dip
MSC55 * Yella Bout It
MSC58 * 501 Blues
MSC60 * Silver Lining
MSC63 * Popeye’s Favorite
MSC65 * Peri-twinkle
MSC70 * Pink A Dot
MSC71 * Purple-licious
MSC72 * Grape Jelly
MSC73 * Candy Apple Red
MSC74 * Hot Tamale
MSC75 * Orange-A-Peel
MSC76 * Cara-bein Blue
MSC77 * Glo-Worm
MSC78 * Lime Light
MSC79 * It’s Sage
MSC80 * Basketball
MSC81 * Cinnamon Stix
MSC82 * Tuscan Red
MSC83 * Tip Taupe
MSC84 * Dee John
MSC85 * Orkid
MSC86 * Old Lace
MSC87 * Ruby Slippers
MSC88 * Tu Tu Tango
MSC89 * Cutie Pie Coral
MSC90 * Elephant Ears
MSC91 * Seabreeze
MSC92 * Cafe Ole
MSC93 * Honeydew List
MSC94 * Curry Around
2 oz. 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50
3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 3.50 8-oz. 9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
9.20
Pint
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40 17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
17.40
Speckled Stroke & Coat Wonderglaze
2 oz.
MSP201 * Speckled Pink-A-Boo
$3.75 MSP203 * Speckled Wine About It
3.75
MSP205 * Speckled Tiger Tail
3.75
MSP206 * Speckled Sunkissed
3.75
MSP210 * Speckled Teal-Next-Time 3.75
MSP211 * Speckled Blue Yonder
3.75
Pint
$19.20 19.20
19.20
19.20
19.20
19.20
2 oz.
MSP212 * Speckled Moody Blue
3.75
MSP213 * Speckled Grapel
3.75
MSP215 * Speckled Tuxedo
3.75
MSP216 * Speckled Cotton Tail
3.75
MSP223 * Speckled Jack O’Lantern 3.75
MSP226 * Speckled Green Thumb
3.75
MSP227 * Speckled Sour Apple
3.75
MSP231 * Speckled The Blues
3.75
MSP241 * Speckled Brown Cow
3.75
MSP245 * Speckled My Blue Heaven 3.75
MSP253 * Speckled Purple Haze
3.75
MSP254 * Speckled Vanilla Dip
3.75
MSP260 * Speckled Silver Lining
3.75
MSP270 * Speckled Pink-A-Dot
3.75
MSP274 * Speckled Hot Tamale
3.75
MSP275 * Speckled Orange-A-Peel 3.75
MSP279 * Speckled It’s Sage
3.75
MSPKIT1 Variety Pack 12 2-oz.Bottles
MSPKIT2 Variety Pack 12 Pint Bottles
Pint
19.20
19.20
19.20
19.20
19.20 19.20 19.20
19.20
19.20
19.20
19.20
19.20
19.20
19.20
19.20
19.20
19.20
40.00
205.00
Mayco Stoneware Glazes Cone 6-10
These unique glazes create the “gas fired” look in an electric kiln with
striations of color thoughout the glaze. NON-TOXIC, consistent in performance and user friendly. Controlled movement but do not run. Fired
results vary depending on clay body. Packaged in wide-mouth pint jars.
MSW100
MSW101
MSW102
MSW103
MSW104
MSW105
MSW106
MSW107
MSW108
MSW109
MSW110
MSW111
MSW112
MSW113
MSW114
MSW115
MSW116
MSW117
MSW118
MSW119
MSW120
MSW121
MSW122
MSW123
MSW124
MSW125
MSW126
MSW127
MSW128
MSW129
MSW130
MSW131
MSW132
MSW133
*
Blue Surf
*
Stoned Denim *
Silver Sage
*Sisal
*
Black Walnut
*
Frost Blue
*Alabaster
*Dunes
*
Green Tea
*
Capri Blue
*Oyster
*
Wrought Iron
*
Tiger’s Eye
*
Speckled Plum *
Iron Wash
*
Midnight Rain *
Robin’s Egg
*Honeycomb
*
Sea Salt
*Cinnabar
*
Northern Woods
*Smoke
*Maycoshino
*Sapphire
*
Matte Maycoshino
*
Purple Mint
*
Polished Pebbles
*Olivine
*Cordovan
*
Copper Float
*
Copper Jade
*Birch
*
Mirror Black
*
Copper Ore
10.25
10.25
10.25
10.25
10.25
10.25
10.25
10.25
10.25
10.25
10.25
10.25
10.25
10.25
10.25
13.35
13.35
13.35
13.35
10.25
10.25
10.25
10.25
13.35
13.35
13.35
10.25
10.25
10.25
10.25
10.25
10.25
13.35
13.35
Mayco Stoneware Clear Glazes Cone 6-10
MSW001
MSW002
MSW003
* Stoneware Clear
* Stoneware Matte Clear
Ø Stoneware Crackle Matte
PintGallon
9.95
34.00
9.95
45.00
9.95
45.00
17
Glazes - Mayco & Spectrum
Mayco Stoneware Ice Glazes Cone 6-10
Spectrum Majolica/Ultraglaze Colors - C/06-5
MSW201
MSW202
MSW203
MSW204
Lead Free and Food Safe. A highly versatile product which can be
used as a majolica color on top of a white base glaze or as an underglaze color underneath a clear glaze or as a glaze on its own. For
majolica technique first apply 2 or 3 coats (depends on how heavily
you apply each coat) of base white glaze all over the piece. After it
has thoroughly dried you can decorate it with the 300 series colors.
*Turquoise
*Pistachio
*
Root Beer
*
Amber Topaz
Pint
10.25
10.25
10.25
10.25
CODE
SP301
Pint SP302
MSW250
*White
SP303
MSW251
*Pink
SP304
MSW252
*Blue
SP305
MSW253
*Green SP306
SP307
SP308
Mayco Stoneware Washes Cone 06-10
SP309
SP310
4 oz.
SP311
MSW301
Iron Wash
3.10
SP312
MSW302
Rutile Wash
3.10
SP313
MSW303
Manganese Wash
3.10
SP314
MSW304
Copper Wash
3.65
SP315
SP316
SP317
Mayco Glazing Accessories
SP318
SP319
Wax Resist (MP2)
SP320
For novel decorating techniques, wax repels glazes & underSP321
glazes in order to show the surface underneath. Fires off.
SP322
MAC302 2 oz. - $2.95
MAC302G Gallon - $47.25
SP323
SP324
Mayco Liquid Mask (MP3)
SP325
A liquid for masking out design details. Use for fired and nonSP326
fired application. Remove before firing.
SP327
MAC303
2 oz. $2.95
SP328
SP329
SP330
Mayco Media (MP4)
SP331
For thinning all fired products as well as all water-based, nonSP332
fired products.
SP333
MAC304
2 oz.
$2.50
SP334
SP335
Clay Mender (Klay Kluch MP6)
SP336
For mending, fusing, or correcting defects. Use on greenware
SP337
or bisque.
SP338
SP339
MAC306
2 oz.
$2.85
SP340
SP341
SP342
SP343
Spectrum Crackle Glazes - C/05-04
SP344
4 oz.
Pint
Gal.
SP345
SP138 Ø Clear Crackle 5.25
13.00 65.00
SP346
SP140 Ø Blue Crackle 5.00
12.00 60.00
SP346
SP348
SP170ØIvory Crackle
5.50
14.50 80.00
SP349
SP350
SP351
Spectrum Satin Glazes - C/06-04
SP352
Code
Color
Pint
Gallon
SP353
250
* Satin Clear
11.50
60.00
SP354
251
* Satin White
13.50
75.00
SP355
253
* Satin Black
18.00
105.00
SP356
254
* Satin Taupe
15.00
80.00
SP357
261
* Satin Yellow
13.50
75.00
SP358
262
* Satin Seagreen
15.00
85.00
SP359
263
* Satin Quebec Blue
15.00
85.00
SP360
264
* Satin Dark Red
22.50
140.00
SP361
SP362
Mayco Stoneware Opal Glazes Cone 06-10
18
COLOR
* White
* Ivory
* Light Yellow
* Yellow
* Orange
* Bright Yellow
* English Rose
* Baby Pink
* Flesh
* Tan
* Aztec Brown
* Walnut Brown
* Chocolate Brown
* French Brown
* Black
* Charcoal
* Light Grey
* Taupe
* Chamois
* Light Beige
* Sand
* Tea
* Honey
* Mustard
* Lime Green
* Mid Green
* Sherwood Green
* Chartreuse
* Dark Olive
* Hunter Green
* Prussian Blue
* Sky Blue
* Turquoise
* Lavender
* Blue Grey
* Bright Blue
* Cobalt Blue
* Blue Velvet
* Navy Blue
* Denim Blue
* Purple
* Fuschia
* Wisteria
* Burgundy
* Ruby
* Bright Peach
* Nectarine
* Rust Red
* Terra Cotta
* Salmon
* Medium Pink
* Rose
* Lilac
* Royal Purple
* Warm Grey
* Light Green
* Leaf Green
* Jade
* Blue Green
* Teal Green
* Dark Red
* Bright Red
Pint
20.00
22.00
20.00
20.00
22.00
22.00
32.00
22.00
20.00
22.00
22.00
22.00
22.00
22.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
20.00
22.00
22.00
22.00
22.00
20.00
20.00
25.00
32.00
20.00
20.00
22.00
22.00
32.00
28.00
28.00
28.00
25.00
32.00
22.00
22.00
22.00
22.00
25.00
22.00
23.50
19.50
22.00
25.00
25.00
25.00
32.00
22.00
25.00
22.00
20.00
25.00
25.00
22.00
22.00
Gallon
100.00
120.00
100.00
110.00
120.00
120.00
195.00
120.00
100.00
120.00
120.00
120.00
120.00
120.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
110.00
120.00
120.00
120.00
120.00
110.00
110.00
150.00
195.00
110.00
110.00
120.00
120.00
195.00
170.00
170.00
170.00
150.00
195.00
120.00
120.00
120.00
120.00
120.00
120.00
120.00
110.00
120.00
150.00
150.00
150.00
195.00
120.00
120.00
120.00
110.00
150.00
150.00
120.00
120.00
Glazes - Spectrum
Spectrum Majolica/Ultraglaze Colors (Cont.)
CODE
SP363
SP364
SP365
SP366
SP367
SP368
SP369
SP370
SP799
SP799D*
COLOR
Pint
* Bright Orange
22.00
* Bright Green
22.00
* Bright Purple
66.00
* Dark Purple
48.00
* Fire Engine Red
32.00
* Christmas Red
32.00
* Neon Orange
32.00
* Hot Pink
35.00
* Base White
14.00
Base White Dipping - 5-gallon pail
Gallon 120.00
120.00
395.00
325.00
195.00
195.00
195.00
215.00
80.00
405.00
Spectrum Opaque Gloss Glazes - C/05-04
All 700 series glazes are lead free, non-toxic and food safe.
Code Color
Pint
Gallon
SP400 * Clear (New)
9.00
39.00
SP700 * Clear (Transparent)
9.50
47.00
SP701 * Snow White
10.50
55.00
SP702 *Porcelain
10.50
55.00
SP703 * Light Gray
12.00
65.00
SP704 *Charcoal
12.00
65.00
SP705 *Black
12.00
70.00
SP706 * Royal Blue
14.00
80.00
SP707 *Azure
12.00
65.00
SP708 * Baby Blue
10.50
55.00
SP709 * Powder Blue
12.00
65.00
SP710 *Wedgwood
12.00
70.00
SP711 * Navy Blue
18.00
100.00
SP712 * Teal Blue
12.00
60.00
SP713 * Hunter Green
12.00
65.00
SP714 * Sea Spray
12.00
60.00
SP715 *Mint
10.50
50.00
SP716 *Jade
12.00
65.00
SP717 * Forest Green
12.00
60.00
SP718 *Mahogany
12.00
65.00
SP721 * Desert Sand
12.00
65.00
SP723 * Chocolate Brown
14.00
75.00
SP724 *Mango
12.00
65.00
SP726 *Ivory
10.50
55.00
SP727 *Flesh
10.50
55.00
SP730 * Deep Pink
14.00
75.00
SP731 *Rose
12.00
65.00
SP732 * Powder Pink
12.00
70.00
SP734 * Butter Yellow
10.50
55.00
SP735 * Canary Yellow
10.50
55.00
SP736 *Purple
18.00
100.00
SP737 *Lilac
12.00
70.00
SP738 * Baby Pink
12.00
65.00
SP740 *Raspberry
14.00
85.00
SP741 *Burgundy
17.00
95.00
SP742 * Dark Red
14.00
75.00
SP743 * Bright Red
17.00
95.00
SP744 * Bright Orange
14.00
75.00
SP745 * Bright Green
17.00
95.00
SP746 * Bright Purple
25.00
165.00
SP747 * Dark Purple
22.00
135.00
SP748 * Fire Engine Red
19.50
115.00
SP749 * Christmas Red
19.50
115.00
SP750 * Neon Orange
19.50
115.00
SP751 * Hot Pink
23.00
123.00
SP752 *Violet
14.00
85.00
SP753 * Bright Yellow
12.00
70.00
SP754 *Marmalade
14.00
85.00
SP755 * Really Red
15.50
90.00
SP756 * Hot Saffron
14.00
80.00
SP757 *Mulberry
15.50
90.00
CodeColor
SP759 * Speckled Gray
SP760 * Chrome Green
SP761 * Grass Green
SP762 * Dove Gray
SP763 * Black Velvet
Pint
15.50
12.00
12.00
14.00
10.50
Gallon
90.00
60.00
60.00
75.00
55.00
Spectrum Semi-Transparent Gloss Glazes
Cone 05/04
Code Color
SP800 *Clear
SP802 * Ivory Speckle
SP805 * Spiced Honey
SP806 * Brown Sugar
SP808 * Clear Blue
SP809 * Clear Pink
SP812 * Beanpot Brown
SP813 * Denim Blue
SP814 *Turquoise
SP816 * Lime Green
SP819 * Light Lime
SP820 *Aquamarine
SP821 *Wintergreen
SP824 *Grape
SP825 *Umber
SP826 *Caramel
SP827 *Tan
SP828 * Light Tan
Pint
10.50
13.00
13.00
10.50
13.00
12.00
10.50
12.00
12.00
17.50
12.00
13.00
14.50
13.00
12.00
13.00
13.00
14.00
Gallon
56.00
75.00
80.00
60.00
75.00
65.00
60.00
70.00
70.00
100.00
70.00
75.00
85.00
75.00
60.00
75.00
75.00
80.00
SP818 * Holly Green
SP822 * Emerald Green
SP823 *Evergreen
19.00
13.00
13.00
115.00
75.00
75.00
Spectrum Raku Glazes
Spectrum Raku glazes were developed for firing in either electric or gas
kilns. These liquid glazes are set up for brushing application, but can be
poured or dipped if thinned with water. They are also available in dry form
(Special Order Only) in 10-lb. bags. Due to the many variables involved
in Raku firing, particularly during the reduction phase, our chip charts and
printed color charts should be used only as approximate guidelines. Your
results may vary greatly.
Code
SP850
SP851
SP854
SP856
SP871
SP872
SP873
SP874
SP875
SP877
SP878
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
SP852
SP853
SP855
SP860
SP861
SP862
SP863
SP864
SP865
SP866
SP870
SP879
SP880
Color
Raku Clear
Raku White
Celadon
Muddy Waters
Raku Yellow
Raku Orange
Raku Red
Lime
Algae Bloom
Kodiak
Cosmic Copper
4 oz.
4.25
4.75
5.75
5.50
6.25
6.75
8.75
7.00
7.00
7.00
7.75
Pint
10.00
11.00
16.50
14.00
17.50
18.50
26.00
19.50
19.50
20.00
23.00
Gal.
50.00
60.00
95.00
80.00
105.00
115.00
170.00
125.00
125.00
130.00
150.00
Turquoise
Cobalt Blue
Emerald
Flash
Metallic Flash
Galaxy
Nebula
Sunspot
Mars
Deep Space
Star Night
Dune
Gator Skin
5.25
5.75
5.00
5.25
5.75
5.75
6.25
5.50
5.75
8.25
7.50
6.75
6.25
13.00
15.50
11.50
13.00
15.50
15.00
17.50
14.00
15.00
24.00
22.00
19.00
17.50
75.00
905.00
65.00
75.00
90.00
85.00
105.00
80.00
85.00
160.00
145.00
120.00
105.00
19
Glazes - Spectrum
Spectrum Low Stone Glazes Cone 06/04
This exciting line of low fire (cone 06/04) glazes that give the appearance of stoneware.
CODE COLOR
SP900* Clear
SP904 * Indian Summer
SP905 * Wheatfield
SP906 * Burnt Sugar
SP907 * Autumn Leaves
SP908 * Molten Stone
SP909* Camel
SP910* Desert
SP911 * Star Dust
SP914* Gator
SP915* Buffalo Hide
SP916* Leather
SP918 * Olive Branch
SP919 * Forest Moss
SP920 * Midnight Sky
SP921 * Iron Earth
SP922* Russet
SP923* Hazelnut
SP924* Slate
SP925* Blush
SP926 * Lizard Skin
SP927 * Tuscan Sun
SP928* Oxblood
SP929* Mocha
SP930 * Franciscan Gray
SP931 * Dove Gray
SP933* Strawberry
CODE COLOR
SP935 * Purple Haze
SP936 * Tortoise Shell
SP937 * Speckled Adobe
SP938 * Blue Rain
SP939 * Chocolate Chip
SP940 * Spotted Plum
SP942 * Mediterranean Blue
SP943* Glacier
SP944 * Desert Wind
SP948* Tortilla
SP950 * Moonlit Sky
SP951 * Sunset Red
SP952 * Meteor Shower
SP953* Expresso
SP955* Eggplant
SP957 * Kelp Forest
SP958* Rainforest
SP961 * Bullfrog Green
SP962 * Phoenix Red
SP901 * Evening Shadow SP902 * Iceberg SP903 * Emerald Green
SP912 * Cloudy Sky SP913 * Old Copper SP932 * Pistachio 2
SP934 * Speckled Turquoise SP941 * Dragonfly SP945 * Robin’s Egg Green SP946 * Spotted Cadet Blue SP947 * Spotted Seagreen SP949 * Deep Sea SP954 * Polished Armor SP956 * Smoke “N Mirrors SP959 * Tarnished Silver
SP960* Gunmetal
4-oz.
PINT
4.75
11.50
5.25
13.50
5.50
14.00
5.50
14.00
5.50
14.00
5.25
13.50
5.50
14.00
5.75
15.00
5.75
15.00
6.2517.50
6.2517.50
6.25
17.50
6.25
17.00
6.25
17.50
6.25
17.50
5.75
16.00
5.75
16.00
6.2517.00
6.7519.50
5.00
13.00
5.00
13.00
5.75
16.00
7.50
22.00
4.75
11.50
5.75
15.50
5.75
16.00
6.75
19.50
4-oz.
PINT
6.25
18.00
5.75
16.00
5.75
15.00
5.75
15.50
5.75
16.00
5.75
16.00
5.50
14.00
5.25
13.50
4.75
11.50
6.25
17.00
5.75
15.00
7.75
23.00
5.75
16.00
5.50
14.00
5.00
12.00
5.75
15.00
5.75
15.50
6.25
18.00
8.00
24.00
5.2513.50
5.25
13.50
5.25
13.50
5.75
15.00
5.75
15.00
5.75
16.00
6.25
18.00
6.25
17.00
5.75
16.00
5.00
12.00
5.25
13.50
6.75
19.00
4.75
11.50
4.75
11.50
5.75
16.00
5.50
14.00
Clear Glazes - Low Fire C/06-04
Pint Gallon 5 Gallon
SP138 Ø Clear Crackle (C/05-04)13.0065.00
SP250 * Satin Clear* (C/05-04)11.50 60.00
SP400*Clear (C/05-04)
9.0039.00
SP700*Clear (C/05-04)
9.5047.00
SP800*Clear (C/05-04)
10.5056.00
SP900 * Clear (C/06-04)
11.50 60.00
Raised Accent Colors
Raised Accent Colors are slip-based colors (or engobes). They come in
2oz. squeeze bottles with a fine metal tip for decorating on greenware or
bisque. They do not flatten out when they are fired.
Code
RAC0*
RAC1*
RAC2*
RAC3*
RAC4*
RAC5*
RAC6 *
RAC7 *
RAC8*
RAC9*
RAC10*
RAC11*
RAC12 *
RAC13 *
RAC14*
RAC15*
RAC16 *
Color
Natural
White
Grey
Black
Brown
Honey
Bright Yellow
Lime Green
Orange
Pink
Rose
Lavender
Light Blue
Royal Blue
Turquiose
Bermuda
Hunter Green
2 oz.
5.25
5.25
5.25
5.25
5.25
5.25
5.25
5.25
5.25
5.25
5.25
5.25
5.25
5.25
5.25
5.25
5.25
Kits
RACPAK1
RACPAK2
RACPAK3
Six 2-oz. Squeeze Pens
RAC 1, 3, 4, 8, 13, 16
RAC 2, 5, 10, 11, 12, 14
RAC 1, 3, 6, 7, 9, 15
Each
29.75
29.75
29.75
Spectrum Glaze Crystals
*Lead Free & Dinnerware Safe.
Code Color
1 oz.
SPCR01 * Cobalt Blue
9.50
SPCR02*White
9.50
SPCR03*Yellow
9.50
SPCR04 * Dark Brown
9.50
SPCR05 * Reactive Brown
9.50
SPCR06*Green
9.50
SPCR07*Maroon
9.50
SPCR08 * Reactive Blue
9.50
SPCR09 * Reactive Green
9.50
SPCR10*Pewter
9.50
SPCR11 *Gold
9.50
SPCR12*Clear
9.50
SPCR00 * Crystal Pack - 1oz. jar of ea. 12 colors 102.50
Non-Toxic Suitable for use by all grades
& institutions.
Cautions Required. Not for use in grades
K thru 6.
BOLD - Non-Toxic Safe for all school grades and institutions.
*Ø
20
- Dinnerware Safe
- Non-Toxic but not recommended for food surfaces due to cracked or textured surfaces.
Glazes - Spectrum
Spectrum Stoneware Glazes - C/4-6
Spectrum products use ceramic frits and stains as their principal ingredients which provide superior appearance and consistency of results over
other products made from raw materials, such as minerals and metal
oxides. They also use a higher percentage of stains which gives greater
intensity, brightness and depth of color to our glazes. All colors in this series are available DRY in 10 lb. packages BY SPECIAL ORDER ONLY.
Code
Color
SP1100 * Transparent
SP1102 * Wedgwood
SP1103 * Dusty Rose
SP1104 * Grass Green
SP1106* Crimson
SP1107* Black
SP1108 * Butter Yellow
SP1109* Coral
SP1110* Turquoise
SP1113 * Texture Milk & Honey SP1115 * Texture Moonscape
SP1117 * Texture Chocolate
SP1118* White
SP1120 * Satin Clear
SP1121 * Satin White
SP1122 * Satin Mottle
SP1123 * Satin SPeckle
SP1124 * Satin Wedgwood
SP1126 * Satin Black
SP1127 * Satin Turquoise
SP1129 * Texture Oasis
SP1131* Charcoal
SP1132* Purple
SP1134 * Chocolate Brown
SP1135 * Navy Blue
SP1136 * Royal Blue
SP1137 * Teal Blue
SP1138 * Lime Green
SP1140 * Texture Kiwi Fruit
SP1141 * Texture Cascade
SP1142 * Texture Wheat
SP1143 * Texture Navy
SP1144 * Texture Mottle
SP1145 * Texture Autumn
SP1146 * Texture Swampy
SP1147 * Delft Blue
SP1151* Fuschia
SP1155 * Pebble Stone
SP1156 * Olive Stone
SP1164 * Dark Red
SP1165 * Bright Red
SP1166 * Bright Orange
SP1167 * Bright Green
SP1168 * Bright Purple
SP1169 * Dark Purple
SP1170 * Texture Mulberry
SP1171 * Texture Plum
SP1176 * Cinnamon Ripple SP1177 * Antique Mottle
SP1180 * Lagoon
SP1181 * Texture Cloud Burst
SP1182 * Texture Jungle
SP1183 * Texture Dark Cloud
SP1184 * Hunter Green
SP1185 * Forest Green
SP1186 * Soft Pink
SP1187Ø Clear Crackle SP1191 * Muddy Waters
SP1192 * Reactive Purple
SP1193 * Fire Engine Red
SP1194 * Christmas Red
SP1195 * Neon Orange
Pint
10.00
10.00
11.50
10.00
17.00
10.50
10.00
10.00
10.00
13.00
14.00
16.50
10.00
10.00
12.50
11.50
10.00
11.50
11.50
11.50
11.50
12.50
20.00
10.50
17.00
17.00
10.50
10.50
12.50
12.50
16.00
18.00
12.50
11.50
14.00
13.00
14.00
13.00
13.00
11.50
12.50
11.50
11.50
35.00
25.00
16.50
17.50
13.00
13.00
13.00
11.50
11.50
11.50
13.00
13.00
13.00
10.00
16.50
30.00
15.00
15.00
15.00
Gallon
50.00
50.00
65.00
50.00
100.00
55.00
50.00
50.00
50.00
75.00
80.00
95.00
50.00
50.00
70.00
65.00
50.00
65.00
65.00
65.00
65.00
70.00
130.00
55.00
100.00
100.00
55.00
55.00
70.00
70.00
95.00
110.00
70.00
65.00
80.00
75.00
80.00
75.00
75.00
65.00
70.00
65.00
65.00
235.00
165.00
95.00
105.00
75.00
75.00
70.00
65.00
60.00
65.00
70.00
70.00
80.00
50.00
100.00
200.00
85.00
90.00
85.00
CodeColor
SP1196 * Hot Pink
PintGallon
15.00
85.00
SP1111
SP1148
SP1149
SP1152
SP1153
SP1154
SP1157
SP1158
SP1159
SP1161
SP1162
SP1172
SP1173
SP1188
SP1197
SP1198
SP1199
11.50
65.00
15.00
85.00
16.50
95.00
16.50
95.00
18.50
115.00
14.00
80.00
16.50
95.00
16.50
95.00
13.00
75.00
15.00
85.00
17.50
105.00
17.50
105.00
15.00
85.00
14.00
90.00
16.50
95.00
11.50
65.00
11.5060.00
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Holly Green
Texture Chowder Oceanic Blue
Texture Chrome Texture Cobalt Texture Iron Texture Honey Texture Bronze Green Stone Texture Topaz Texture Burgundy Texture Leopard Texture Hot Chowder Pewter Reactive Red
Oil SPot
Texture Mossy
Spectrum Hi Fire Glazes - C/9-10
Code
1200
1201
1207
1209
1210
1215
1225
1229
1235
1237
1243
1244
1254
1273
1276
1277
1278
1279
Color
*Transparent
* Satin Crackle
*Turquoise
*Black
*White
*Ruby
* Texture Honey
*Blue
* Texture Blue
* Satin Black
*Teal
* Sky Blue
*Yellow
* Bright Green
* Fire Engine Red
* Christmas Red
* Neon Orange
* Hot Pink
1221
1222
1227
1228
1234
1263
1269
*
*
*
*
*
*
*
Texture Oatmeal
Cinnamon Lava
Texture Emerald
Texture Grey
Texture Seafoam
Blue Lava
Orchid Lava
Pint
8.00
7.50
11.50
10.50
10.00
17.00
10.00
15.50
15.50
15.00
10.00
10.00
10.00
13.00
13.00
13.00
13.00
17.00
Gallon
33.00
30.00
60.00
55.00
50.00
100.00
50.00
90.00
90.00
85.00
50.00
50.00
55.00
75.00
75.00
75.00
75.00
100.00
10.00
12.50
10.00
11.50
13.00
17.00
21.00
50.00
70.00
50.00
60.00
75.00
100.00
140.00
Spectrum Ash Glazes - C/4-6
Code
1421
*
1422
*
1423
*
1424
*
1425
*
1426
*
Color
Pear Ash
Fig Ash
Coffee Bean Ash
Cactus Ash
Kiwi Ash
Blueberry Ash
Pint
10.00
9.00
9.00
9.00
9.00
9.00
Gallon
49.00
37.00
37.00
37.00
37.00
37.00
Spectrum Metallic Glazes - C/4-6
Code
1451
1452
1453
1454
1455
1456
*
*
*
*
*
Color
Marscape
Foiled Chocolate
Golden Rule
Caribbean Cove
Viridian Gold
Pint
11.50
11.50
11.50
11.50
11.50
Blue Persuasion
11.50
Gallon
85.00
85.00
85.00
85.00
85.00
85.00
21
Glazes - Spectrum & Standard (Dry)
Spectrum Nova Stoneware Dipping - C/4-6
Code
1500
1501
1502
1510
1511
1512
1513
1514
1515
1520
1521
1522
1523
1530
1531
1533
1534
1535
1536
1537
1539
1540
1541
Color
* Clear
Ø Clear Crackle
* Satin Clear
* White
* Black
* Yellow
* Cobalt Blue
* Chrome Green
* Burgundy
* Soft White
* Soft Red
* Soft Blue
* Soft Aqua
* Coffee
* Latte
* Muddy Hippo
* Dark Jungle
* Wet Sand
* Dark Leopard
* Antique Copper
* Elephant Hide
* Matte Blue
* Matte Black
1524
1525
1532
1538
*
*
*
*
Soft Green
Soft Midnight
Storm Cloud
Swamp Water
Gallon
32.00
35.00
40.00
45.00
50.00
45.00
45.00
45.00
75.00
65.00
90.00
80.00
80.00
45.00
45.00
50.00
40.00
50.00
50.00
45.00
40.00
55.00
60.00
50lbs. Dry
140.00
155.00
180.00
210.00
240.00
215.00
225.00
225.00
425.00
355.00
475.00
420.00
445.00
225.00
225.00
255.00
195.00
275.00
275.00
225.00
170.00
290.00
290.00
70.00
75.00
60.00
60.00
375.00
410.00
300.00
305.00
Standard Ceramic Lead-Free Stoneware
Glazes - Cone 5/6
We recommend that you test all glazes with your clays and firing
methods. By adding various percentages of oxides and stains, you will
command an infinite range of colors. All glazes are in powdered form.
Code - Matte Glazes
532 - White
1049 - Stoney White
1065 - Waxy White
1066 - Black
1067 - Brown
1068 - Creme
1088 - Transparent
1215 - Khaki
1216 - Stone Blue
1232 - Hay Bale Yellow
1233 - Pale Seaweed
1234 - Mottled Pink
1235 - Peach
1236 - Frosted Moss
1237 - Midnight Moss
1238 - Frosted Cherry
1239 - Frosted Turquoise
1 lb. 5 lbs. 10lbs. 50 lbs.
3.00
2.00 1.80
1.30
3.00
2.00 1.80
1.30
3.00
2.00 1.80
1.30
4.25
3.00 2.85
2.25
3.00
2.00 1.80
1.30
3.00
2.00 1.80
1.30
3.50
2.05 2.00
1.80
7.50
6.00 5.00
4.70
3.00
2.50 2.00
1.80
3.75
3.15 2.90
2.50
3.75
3.15 2.90
2.50
7.50
6.50 6.00
5.50
7.50
6.50 6.00
5.50
4.50
3.25 3.00
2.80
4.50
3.25 3.00
2.80
7.50
6.50 6.00
5.50
5.50
4.20 3.90
3.50
Code - Glossy Glazes
1069 - Clear Crackle
1071 - Dark Blue
1087 - Transparent
1110 - Walnut Brown
1111 - Stormy Blue
1112 - Celedon
1113 - Periwinkle Blue
1118 - Black
1119 - White
1125 - Clear
1 lb. 5 lbs. 10lbs. 50 lbs.
3.00
2.00 1.80
1.30
3.50
2.05 2.00
1.80
3.50
2.05 2.00
1.80
3.75
3.15 2.90
2.50
5.50
4.20 3.90
3.50
4.50
3.10 2.85
2.50
4.75
3.70 3.55
3.20
5.00
3.80 3.65
3.25
4.25
2.80 2.50
2.00
3.00
2.00 1.80
1.30
22
Code - Glossy Glazes
1194 - Bright Red
1198 - Layering Glaze
1199 - Clear
1200 - Sea Mist (Green)
1201 - Mediterranean Mist
1205 - Pewter
1206 - Chambray
1207 - Fog (Gray Green)
1208 - Hunter Green
1209 - Yellow
1210 - Dark Red
1211 - Orange Red
1212 - Orange
1214 - Oatmeal
1217 - Merlot
1218 - Purple-Purple
1219 - Grape
1220 - Iron Red
1221 - Coral Pink
1222 - Midnight Sky
1223 - Moss
1224 - Iridescent Iron
1225 - Mottled Green Trans
1226 - Mink Brown Trans
1227 - Mottled Blue
1228 - Ivy Green Trans
1229 - Mottled Brown Trans
1230 - Snow-on-brick
1231 - Medium Cork
1240 - Blue Sapphire
1241 - Warm Sky Blue
1242 - Teal Green
1243 - Granny Apple Green
1244 - Shrimp Bisque
1 lb. 5 lbs. 10lbs. 50 lbs.
7.00
5.50 4.50
4.00
3.75
3.15 2.90
2.50
4.10
3.50 3.00
2.60
5.00
3.80 3.65
3.25
5.00
3.80 3.65
3.25
5.50
4.20 3.90
3.50
5.50
4.20 3.90
3.50
5.40
4.10 3.80
3.40
4.10
3.50 3.00
2.60
7.50
6.00 5.00
4.70
7.50
6.00 5.00
4.70
7.50
6.00 5.00
4.70
7.50
6.00 5.00
4.70
5.00
3.80 3.65
3.25
5.00
3.80 3.65
3.25
7.50
6.00 5.00
4.70
5.50
4.20 3.90
3.50
3.75
3.15 2.90
2.50
3.75
3.15 2.90
2.50
3.75
3.15 2.90
2.50
3.75
3.15 2.90
2.50
5.00
3.80 3.65
3.25
3.50
2.05 2.00
1.80
3.50
2.05 2.00
1.80
5.40
4.10 3.80
3.40
3.50
2.05 2.00
1.80
3.50
2.05 2.00
1.80
3.75
3.15 2.90
2.50
3.75
3.15 2.90
2.50
4.10
3.50 3.00
2.60
4.10
3.50 3.00
2.60
4.10
3.50 3.00
2.60
4.10
3.50 3.00
2.60
6.50
5.00 4.00
3.50
Mixing Suggestions: (Water amounts are approximate.
Results may vary)
To 1 lb. Dry Glazes :
Water
Yield
1068, 1069, 1071, 1087, 1088, 1110, 1111,
1119, 1198, 1194
14Oz.
20 Oz.
532, 1066, 1200, 1201, 1205, 1206, 1207,
1208, 1209, 1210, 1211, 1212, 1214, 1215,
1216, 1217, 1218, 1219, 1220, 1221, 1222,
1223, 1224, 1230, 1231, 1240, 1241, 1242,
1243, 1244, 1245
16 Oz.
18 Oz.
1049, 1065, 1067, 1112, 1113, 1118, 1125,
1199, 1225, 1226, 1227, 1228, 1229, 1232,
1233, 1234, 1235, 1236, 1237, 1238, 1239
18 Oz.
20 Oz.
Liquified glazes should be passed through a 60 or 80 mesh sieve.
If Dipping: Immerse for 2 seconds, let dry for 5 minutes, then repeat
if desired. If Pouring: An uninterrupted flow is crucial for good color
results. Avoid overlaps. If Brushing: Apply 2 coats, letting first coat dry
before applying second. A third coat may be necessary. If Spraying:
Thin glaze by adding at least 10% more water. Let dry between coats.
Layering Glaze #1198: Use 1198 as base glaze. Let dry before using
top glaze. Results will differ depending on number of top coats applied.
Due to the fact that some glazes tend to run more than others, testing
should be done with all glaze combinations.
If glazes are settling out while stored you can add a glaze suspender or add 2% bentonite, sieve thorough a 60 or 80 mesh sieve.
Please see website for complete color chart of Standard
Ceramic Glazes: www.standardceramic.com
Underglazes
AMACO “LUG” Underglazes - Cone 06-9
Concentrated, opaque colors cover large areas quickly, easily and
smoothly. Use for detailed painting, sgraffito, water color effects, brush
painting, silk screening or with wax resist. For greenware or bisque.
Colors are approximately the same tone before and after firing. Dinnerware-safe when covered with a dinnerware-safe glaze. Lead-free.
LUG-1
*
LUG-10
*
LUG-15
*
LUG-20
*
LUG-21
*
LUG-22
*
LUG-25
*
LUG-26
*
LUG-30
*
LUG-31
*
LUG-40
*
LUG-41
*
LUG-42
*
LUG-43
*
LUG-50
*
LUG-51
*
LUG-52
*
LUG-53
*
LUG-54
*
LUG-55
*
LUG-56
*
LUG-58
*
LUG-60
*
LUG-61
*
LUG-65
*
2 oz.
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
6.20
Black White Warm Gray Light Blue Medium Blue Dark Blue Turquoise Aqua Light Brown Mahogany Brown Chartreuse Warm Green Blue Green Dark Green Pink Rose Peach Sun Tan Lilac Purple Maroon Dark Red Light Yellow Bright Yellow Orange Pint
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
21.95
Set LUG712 includes: LUG1 Black, LUG10 White, LUG20 Light Blue,
LUG22 Dark Blue, LUG26 Aqua, LUG30 Light Brown, LUG42 Blue
Green, LUG43 Dark Green, LUG51 Rose, LUG52 Peach, LUG56
Maroon, LUG60 Light Yellow
LUG712
*
12, 2 oz. jars
LUG812
*
12 2 oz. jars $71.75
Set LUG812 includes: LUG15 Warm Gray, LUG21 Medium Blue,
LUG25 Turquoise, LUG31 Mahogany Brown, LUG40 Chartreuse,
LUG41 Warm Green, LUG50 Pink, LUG53 Sun Tan, LUG54 Lilac,
LUG55 Purple, LUG61 Bright Yellow, LUG65 Orange
$71.75
AMACO Velvet Underglazes - Cone 05-10
Unglazed, velvets have the appearance of velour or velvet.
They assume a soft, satin-matte finish under a transparent
matte glaze; & intensify in color when covered with a clear
transparent gloss glaze. All are semi-translucent with one
coat, opaque with three. They fire true to color as applied from
the jar, and may be intermixed to create a palette of hundreds of colors.
Velvets tolerate a wide firing range, with the recommended firing temp.
being that of the clay used. #380-#384 can be fired from C/05-6 & still
maintain their intensity. Red (382), Light Red (383) & Real Orange (384)
will hold their color at C/10 reduction. Test fire first for temp. above C/04.
Use on greenware or bisque. While velvets were developed to be used
without a cover glaze, they are food-safe only when applied & fired under
a dinnerware safe glaze. Lead-free.
V301
V302
V303
V304
V308
V309
V310
V313
V314
V315
*
*
*
*
*
*
*
*
*
*
Ivory Beige
Beige
Terra Cotta
Straw
Yellow
Deep Yellow
Tan
Red Brown
Chocolate Brown
Peach
2-oz.
$ 4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.90
Pint
$17.50
17.50
17.50
17.50
17.50
17.50
17.50
18.50
V316
V318
V320
V321
V322
V323
V325
V326
V327
V328
V332
V333
V334
V336
V341
V343
V345
V350
V353
V354
V355
V356
V357
V360
V361
V366
V367
V368
V369
V370
V371
V372
V373
V374
V375
V376
V380
V381
V382
V383
V384
V385
V386
V387
V388
V389
V390
V391
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Light Pink
Rose
Lavender
Lilac
Purple
Salmon
Baby Blue
Medium Blue
Turquoise Blue
Iceberg Blue
Teal Blue
Avocado
Flaxen
Royal Blue
Blue Green
Chartreuse
Light Green
Orange
Dark Green
Leaf Green
Shadow Green
Pearl Grey
Dark Grey
White
Jet Black
Teddy Bear Brown
Mist Grey
Antique Ivory
Fawn
Velour Black
Rosy Mauve
Mint Green
Medium Brown
Royal Peach
Maroon
Hunter Green
Violet
Amethyst
Red
Light Red
Real Orange
Cinnamon
Electric Blue
Bright Red
Radiant Red
Flame Orange
Bright Orange
Intense Yellow
4.90
4.90
6.95
4.90
4.90
4.90
4.25
4.25
4.25
4.25
4.25
4.25
4.25
6.95
4.90
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.25
4.90
4.25
4.25
4.25
4.25
6.95
4.25
6.95
6.95
6.95
6.95
6.95
4.25
4.25
6.95
6.95
6.95
6.95
6.95
18.95
18.95
39.95
18.95
18.95
18.95
17.50
17.50
17.50
15.95
17.50
39.95
18.95
17.50
17.50
12.95
17.50
17.50
17.50
17.50
17.50
18.95
17.50
39.95
17.50
39.95
39.95
39.95
39.95
39.95
17.50
17.50
39.95
39.95
39.95
39.95
39.95
VS1 Set includes 12 2-oz. jars: V308 Yellow, V326 Medium Blue, V354
Leaf Green, V314 Chocolate Brown, V360 White, V370 Velour Black,
V322 Purple, V341 Blue Green, V321 Lilac, V316 Light Pink, V332 Teal
Blue, V371 Rosy Mauve
VS1 * Velvet Set #1 (12 jars)
$46.00
VS2 Set includes 12 2-oz. jars: V301 Ivory Beige, V303 Terra Cotta,
V315 Peach, V323 Salmon, V325 Baby Blue, V343 Chartreuse, V320
Lavender, V309 Deep Yellow, V313 Red Brown, V327 Turquoise Blue,
V336 Royal Blue
VS2 *
Velvet Set #2 (12 jars)
$46.00
VS3 Set includes 12 2-oz. jars: V372 Mint Green, V373 Medium Brown,
V374 Royal Peach, V375 Maroon, V376 Hunter Green, V380 Violet,
V381 Amethyst, V382 Red, V383 Light Red, V384 Real Orange, V385
Cinnamon, V386 Electric Blue
VS3 *
Velvet Set #3 (12 jars)
$46.00
VS4 Set includes 12 2-0z. jars: V360 White, V361 Jet Black, V391 Intense Yellow, V389 Flame Orange, V387 Bright Red, V353 Dark Green,
V326 Medium Blue, V386 Electric Blue, V381 Amethyst, V318 Rose,
V345 Light Green, V366 Teddy Bear Brown
VS4 * Velvet Set #4 (12 jars)
$46.00
23
Underglazes
AMACO Designer Velvet Underglazes
These underglazes are similar to the original velvet line, except that
they have small specks in them. Test for temperatures higher than
C/04. LEAD FREE. All Designer Velvets are [ST] semi-translucent
with one coat; [O] = Opaque with 3 coats.
Code
DV-3302
DV-3308
DV-3316
DV-3320
DV-3325
DV-3327
DV-3328
DV-3334
DV-3354
DV-3360
DV-3367
DV-3368
DV-3369
DV-3371
DV-3372
DV-3374
Color
* Canyon Beige
* Desert Sun * Speckled Pink
* Desert Verbena * Desert Sky * Turquoise Stone
* Fossil Gray
* Sand Dune * Cactus Green
* Feather White
* Tumbleweed * Phoenix Ivory *Sandstorm
* Rosy Mauve
* Desert Grass * Painted Desert
2 oz.
3.20
3.20
3.20
4.10
3.20
4.10
3.20
3.20
3.20
3.20
3.20
3.20
3.20
3.20
3.20
3.20
Pint
12.45
12.45
DVS Set includes 12 2-oz. jars: DV3334 Sand Dune, DV3354 Cactus
Green, DV3369 Sandstorm, DV3360 Feather White, DV3367 Tumbleweed, DV3325 Desert Sky, DV3302 Canyon Beige, DV3304 Golden
Sand, DV3316 Speckled Pink, DV3328 Fossil Grey, DV3308 Desert
Sun, DV3371 Rosy Mauve
DVS
Designer Velvet Glaze Set (12 jars)
$31.00
AMACO Underglaze Pencils
Underglaze pencils are for fine line drawing, shading or writing. It is necessary to apply a glaze over
your underglaze pencil designs. Apply on bisque.
The darker colors fire up to C/9, while the Crimson
and Yellow can be fired to C/6. NONTOXIC. 15%
discount on six assorted pencils.
Colors: Crimson, Yellow, Black, Brown, *Blue, Green
PNCIL
CRIM, YL, BR, GR, BK, BL
$ 11.49
PNCILSET One of each color 65.00
*Blue is restricted from use K-6
AMACO Underglaze Chalk Crayon Sets
Underglaze crayons (2 3/4” x 7/16”) for use on bisqueware.
Produces a pebbled effect. Similar to pastels, colors may be
blended or smoothed by rubbing with a finger or a cotton
swab. Watercolor effects are obtained by brushing with
water. Small pieces may be dissolved in water for painting. Additional information on box for application and firing. Restricted from use K-6.
SET208 * Turquoise, Yellow, Rose, Dark Blue, Brown
Dark Green, Black, White
$32.95
SET209 * Lilac, Yellow-Green, Gray, Medium Green,
Light Brown, Blue-Green, Dark Brown,
Medium Blue
$32.95
AMACO Sun Strokes “SS” Underglazes
These colors have a gloss finish, although a clear
glaze will smooth and brighten the colors. Apply two
even coats on a mature Cone 04 bisque, then fire to
Cone 05 (1911°F, 1044°C).
CodeColor
2oz.
SS-201
* Tulip Red 6.20
SS-202
* Snapdragon 6.20
SS-203
* Marigold Orange 6.20
SS-204
* Daffodil Yellow 6.20
SS-205 * Zinnia Orange 6.20
SS-206
* Clover Green 6.20
SS-SET
6 2-oz. Jars of All 6 Colors
AMACO Dry Engobes
Pint
35.95
35.95
35.95
35.95
35.95
35.95
24.95
AMACO Semi-Moist Underglaze Pan Sets
These Underglazes are intense, opaque colors which are especially
good for watercolor effects and painting of fine detail. Pink, Maroon,
Peach, Rose, and Yellow hold their color when fired to temperatures up
to Cone 6. All other colors may be fired up to Cone 10.
Mix with water to the consistency of thick cream. For extra
smooth brushing, diluted gum solution may be substituted for
water. C/06-04.
Code
Color
l lb.
E701-1
Natural Black
$14.95
E702-1
Jet Black**
17.50
E710-1
White
11.39
E720-1
Dark Blue
16.95
E730-1
Red Brown
11.95
E731-1Brown
11.95
E732-1
Dark Buff
11.95
E740-1
Dark Green**
11.95
E760-1Yellow**
11.95
**not for spray application.
SET108: * Maroon, Light Yellow, Dark Blue,Blue-Green,
Dark Green, Black, Light Brown, White
$30.45
SET109: * Turquoise, Lilac, Medium Blue, Pink, Warm Grey, Mahogany Brown, Bright Yellow, Irish Green
$30.45
SET110: * Purple, Light Blue, Aqua, Rose, Orange, Peach,
Chartreuse, Sun Tan
$30.45
SET111: * Red, Light Red, Real Orange, Electric Blue,
Amethyst, Violet, Hunter Green, Salmon
$30.45
Special Order: Individual replacement colors in
dozens Developed by Ceramic Supply, DECOSLIP is a blend of high quality clays and
ceramic raw materials that will produce a colored fired clay surface. Ideal
for decorating, apply DECOSLIP to moist clay surface. DECOSLIP has
been formulated to fit many different clay body types and temperatures
ranging from c/01 (1675 degrees F) to c/12 (2415 degrees F). Suitable
for electric, gas, wood, soda and salt kiln atmospheres. Ideal for scraffito
and slip trail techniques. It is always best to test DECOSLIP on the clay
to ensure best results. To use, simply shake the slip bottle, apply to moist
clay surface, let dry, bisque fire, apply glaze over DECOSLIP, then glaze
fire. Clear or semi opaque glazes will best reveal the color of DECOSLIP.
NONTOXIC, conforms with ASTM D-4236.
Colors: Black, White, Yellow, Pink, Blue, Green
8 oz. Bottle (When ordering specify color)
Pint refills available-special order
24
$9.95
15.95
Underglazes
Duncan Underglazes
“E-Z” One-Stroke Translucent Underglazes
E-Z Strokes have become popular for their versatility. Their
translucent quality makes them suitable for use with a number
of decorating techniques including airbrushing, antiquing and
brushwork. One stroke is all you need for most design work.
One or two additional strokes may be added for depth and shading while the color is still wet. If additional coats are applied
after the color has dried, the heavy buildup may cause popping
off, bleeding and bubbling. NONTOXIC. Refer to label for instructions on application, firing and usage. C/06-05
Code
Color
EZ063
Wine Berry
EZ064
Concord Grape
EZ065Periwinkle
EZ066
Morning Glory
EZ067
True Taupe
EZ068
Roasted Chestnut
EZ070
Olive Green
EZ071
Dark Olive
EZ072Romaine
EZ074
Dark Navy
EZ075
Passion Red
EZ076Honeysuckle
EZ101
Neon Yellow
EZ102
Neon Blue
EZ103
Neon Chartreuse
EZ104
Neon Orange
EZ105
Neon Green
EZ106
Neon Red
1 oz. Sq.
Pints
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
45.00
3.60
3.60
3.60
3.60
3.60
3.60
3.60
Code
Color
1 oz. Sq.
Pints
EZ002
Cinderella Pink
$3.60
EZ003
Irish Green
3.60
EZ004
Willow Yellow
3.60
EZ006
Forget-Me-Not Blue
3.60
EZ007
Royal Purple
3.60
EZ008
Ruby Red
3.60
EZ010
French Brown
3.60
EZ011
Sienna Brown
3.60 French Dimensions Fired Color Accents
EZ012
Cobalt Jet Black
3.60
45.00
High-pile glazes for raised designed effects over and under nonEZ012
Cobalt Jet Black
Gallon 218.00
moving glazes and over each other. Squeeze bottle with writing
EZ013White
3.60
45.00
EZ014
Jade Green
3.60 tip for easy application. Refer to label for instructions on applicaEZ016
Grass Green
3.60 tion, firing and usage. C/06
EZ017
Dark Turquoise
3.60
Code
Color
1.25 oz.
EZ018Chartreuse
3.60
45.00
FD254
Ø
Black
Licorice
$3.25
EZ019
Smoke Grey
3.60
FD258 Ø
Pure White
3.25
EZ020Mulberry
3.60
French Straw
3.25
EZ022
Flesh Tone
3.60 FD265 Ø
FD266
Ø
French
Papaya
3.25
EZ024
Royal Blue Green
3.60
FD267
Ø
French
Scarlet
3.25
EZ025
Lemon Yellow
3.60
French Wine
3.25
EZ027
Navajo Turquoise
3.60
45.00 FD268 Ø
FD269 Ø
French Plum
3.25
EZ028
Leaf Green
3.60
FD270
Ø
French
Delft
3.25
EZ030Rose
3.60
FD271
Ø
French
Kiwi
3.25
EZ031
Light Blue
3.60
French Briarwood
3.25
EZ032
Peacock Green
3.60 FD272 Ø
FD274 Ø
Light Pink
3.25
EZ033
Ivy Green
3.60
FD275
Ø
Neon
Blue
3.25
EZ034Orange
3.60
FD276
Ø
Neon
Chartreuse
3.25
EZ035
Dutch Blue
3.60
FD278 Ø
French Really Red
3.25
EZ037Black
3.60
45.00
EZ038
Medium Mahogany
EZ039
Dark Brown
EZ041
Denim Blue
EZ042Teal
EZ043
Mint Julep
EZ044Cobblestone
EZ047
Thundercloud Grey
EZ048
Mesa Clay
EZ050
Pueblo Purple
EZ052
Pecos Pink
EZ053
Hacienda Jade
EZ054
Papago Turquoise
EZ055
Indian Summer
EZ056
Brick Red
EZ057
Coral Red
EZ058
Poppy Orange
EZ059Buttercream
EZ061
Petal Pink
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
45.00
3.60
45.00
3.60
3.60
3.60
Non-Toxic Suitable for use by all grades
& institutions.
Cautions Required. Not for use in grades
K thru 6.
BOLD - Non-Toxic Safe for all school grades and institutions.
*Ø
- Dinnerware Safe
- Non-Toxic but not recommended for food surfaces due to cracked or textured surfaces.
25
Underglazes
Duncan CoverCoat “CC” Opaque Underglazes
CoverCoats are applied directly to greenware and are absorbed as part
of the piece. CoverCoats fire to an opaque, porous matte finish. A glaze
finish is used to seal the porous surface and brighten the underglaze
colors. NONTOXIC. Refer to label for instructions on application,
firing and usage.
CC101 Artcic White
CC102 Ivory Pearl
CC103 Lotus Yellow
CC105 Sungold Yellow
CC106 Harvest Gold
CC108 Miami Pink
CC109 Sunset Pink
CC111 Dresden Flesh
CC112 Light Flesh
CC117 Walnut Brown
CC118 Cobalt Crystal Black
CC119Charcoal
CC120 Samoa Taupe
CC121 Temple Grey
CC122 Moonstone Grey
CC126 Spring Green
CC127 Fern Green
CC128 Everglade Green
CC129 Forest Green
CC131 Teal Blue
CC132 Fiesta Turquoise
CC133Turquoise
CC134 Stardust Blue
CC135 Lake Blue
CC136 Marlin Blue
CC137 Regency Purple
CC140 Morocco Red
CC141 Light Yellow
CC142 Canary Yellow
CC143 Yellow Orange
CC144 Burnt Orange
CC145 Indian Red
CC146Purple
CC148 Deep Turquoise
CC150 Medium Green
CC151Rose
CC152Peach
CC153Avocado
CC154 Cobalt Navy Blue
CC156 Medium Brown
CC157 Darkest Brown
CC158 Bright Green
CC159 Bright Blue
CC160 Deep Purple
CC161 Blue Green
CC163 Danish Blue
CC164 Ice Grey
CC165 Black Brown
CC169 Peaches’N Cream
CC171Butterscotch
CC173Cobblestone
CC174 Kentucky Bluegrass
CC178 Pecos Pink
CC180 Papago Turquoise
CC181 Indian Summer
CC183 Cherry Red
CC184 Orange Peel
CC185Apricot
CC186 Tomato Red
CC187 Rustic Red
CC188Lilac
CC190 Baby Blue
CC191 Marine BLue
CC192 Dark Blue
26
2 oz. Pint
Gallon
3.60 19.80 105.00
3.60 19.80
3.60 19.80
3.60 19.80
3.60 19.80
3.60
3.60 19.80
3.60
3.60
3.60 19.80
3.60
3.60 19.80
3.60
3.60 19.80
3.60
3.60
3.60 19.80
3.60
3.60 19.80
2.35 19.80
3.60 19.80
3.60 19.80
3.60 19.80
3.60 19.80
3.60 19.80
3.60
3.60 19.80
3.60
3.60 19.80
3.60 19.80
3.60 19.80
3.60 19.80
3.60 19.80
3.60
3.60 19.80
3.60 19.80
3.60
3.60 19.80
3.60
3.60
3.60
3.60
3.60 19.80
3.60 19.80
3.60 19.80
3.60
3.60
3.60 19.80
105.00
3.60
3.60 19.80
3.60 19.80
3.60 19.80
3.60
3.60
3.60 19.80
3.60 19.80
3.60 19.80
3.60
3.60 19.80
3.60 19.80
3.60 19.80
3.60 19.80
3.60 19.80
3.60
CC193 Hunter Green
CC194 Red Wagon
CC195Honeysuckle
CC201 Neon Yellow
CC202 Neon Blue
CC203 Neon Chartreuse
CC204 Neon Orange
CC205 Neon Green
CC206 Neon Red
2 oz.
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
Pint
Gallon
19.80
19.80
19.80
19.80
19.80
19.80
19.80
19.80
19.80
Duncan Concepts Underglaze for Bisque
Concepts are a new generation in fire color. One stroke allows for translucent design work; three strokes provide solid coverage. Use with either
IN1001 Envision Clear or GL612 Diamond Clear Glaze for a high gloss
shine, though they will give a glazed finish without glaze application. Offered in a balanced palette of compatible use for ease of color selection.
Convenient squeeze bottles (2oz. & 8oz.) NONTOXIC. Refer to label
for instructions on application, firing and usage. C/06
Code
CN011 *
CN012 *
CN013 *
CN021 *
CN022 *
CN031 *
CN032 *
CN033 *
CN041 *
CN042 *
CN043 *
CN052 *
CN061 *
CN062 *
CN063 *
CN071 *
CN072 *
CN073 *
CN074 *
CN081 *
CN082 *
CN083 *
CN101 *
CN102 *
CN103 *
CN111 *
CN112 *
CN113 *
CN121 *
CN122 *
CN123 *
CN131 *
CN132 *
CN133 *
CN141 *
CN142 *
CN151 *
CN152 *
CN153 *
CN161 *
CN162 *
CN163 *
CN171 *
CN172 *
CN173 *
CN181 *
CN182 *
CN183 *
CN191 *
Color
2 oz. Light Straw
3.60
Bright Straw
3.60
Dark Straw
3.60
Light Saffron
3.60
Bright Saffron
Light Butternut
3.60
Bright Butternut
3.60
Dark Butternut
3.60
Light Papaya
3.60
Bright Papaya
3.60
Dark Papaya
3.60
Bright Tangerine
3.60
Light Salsa
3.60
Bright Salsa
3.60
Dark Salsa
3.60
Light Scarlet
3.60
Bright Scarlet
3.60
Dark Scarlet
3.60
Really Red
3.60
Light Wine
3.60
Bright Wine
3.60
Dark Wine
3.60
Light Heather
3.60
Bright Heather
3.60
Dark Heather
3.60
Light Delft
3.60
Bright Delft
3.60
Dark Delft
3.60
Light Nautical
3.60
Bright Nautical
3.60
Dark Nautical
3.60
Light Tidepool
3.60
Bright Tidepool
3.60
Dark Tidepool
3.60
Light Aqua
3.60
Bright Aqua
3.60
Light Blue Spruce 3.60
Bright Blue Spruce 3.60
Dark Blue Spruce 3.60
Light Wintergreen 3.60
Bright Wintergreen 3.60
Dark Wintergreen 3.60
Light Kelp
3.60
Bright Kelp
3.60
Dark Kelp
3.60
Light Kiwi
3.60
Bright Kiwi
3.60
Dark Kiwi
3.60
Light Ivy
3.60
8 oz.
$8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
154.00
110.00
Underglazes
Duncan Concepts Underglaze (Continued)
Code
CN193 *
CN201 *
CN202 *
CN203 *
CN211 *
CN212 *
CN213 *
CN221 *
CN222 *
CN232 *
CN233 *
CN241*
CN244 *
CN253 *
CN261 *
CN262 *
CN263 *
CN271 *
CN272 *
CN281 *
CN282 *
CN291 *
CN292 *
CN293 *
CN302 *
CN303 *
CN311 *
CN312 *
CN313 *
CN322 *
CN331 *
CN332 *
CN333 *
CN341 *
CN342 *
CN343 *
CN501 *
CN502 *
CN503 *
CN504 *
CN505 *
CN506 *
CN507 *
CN508 *
CN509 *
CN510 *
CN511 *
CN512 *
CN513 *
CN514 *
CN515 *
CN516 *
CN517 *
CN518 *
CN519 *
CN520 *
CN521 *
CN522 *
Color
2 oz.
Dark Ivy
3.60
Light Grey
3.60
Bright Grey
3.60
Dark Grey
3.60
Light Taupe
3.60
Bright Taupe
3.60
Dark Taupe
3.60
Light Blush
3.60
Bright Blush
3.60
Bright Briarwood 3.60
Dark Briarwood
3.60
White
3.60
Really White
3.60
Dark Black
3.60
Light Grape
3.60
Bright Grape
3.60
Dark Grape
3.60
Light Jade
3.60
Bright Jade
3.60
Light Brown
3.60
Bright Brown
3.60
Light Purple
3.60
Bright Purple
3.60
Dark Purple
3.60
Bright Caribbean 3.60
Dark Caribbean
3.60
Light Ginger
3.60
Bright Ginger
3.60
Dark Ginger
3.60
Bright Plum
3.60
Light Olive
3.60
Bright Olive
3.60
Dark Olive
3.60
Light Pink
3.60
Bright Pink
3.60
Dark Pink
3.60
Neon Yellow
3.60
Neon Blue
3.60
Neon Chartreuse 3.60
Neon Orange
3.60
Neon Green
3.60
Neon Coral
3.60
Neon Red
3.60
Chutney Spice
3.60
Paprika Red
3.60
Earthen Moss
3.60
Sunflower Yellow 3.60
Green Apple
3.60
Deep Berry
3.60
Straw Sprinkles
3.75
Neon Orange Spr. 3.75
Really Red Spr.
3.75
Purple Sprinkles
3.75
Delft Sprinkles
3.75
Aqua Sprinkles
3.75
Caribbean Spr.
3.75
Kiwi Sprinkles
3.75
Really White Spr.` 3.75
8 oz. 1 Gal.
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50 110.00
8.50
8.50 110.00
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
8.50
9.55
9.55
9.55
9.55
9.55
9.55
9.55
9.55
9.55
Mayco Opaque “UG” Underglazes
Opaque Underglazes are homogenized for ease of application &
formulated for use directly from the jar. All colors may be intermixed.
Not necessary to thin with water. For general all-around use, sgraffito,
design or cover. Apply to greenware. A kit consisting of 10 popular
colors is also available. C/06-05. NONTOXIC.
MUG001 Kings Blue
MUG002 Sea Blue
2 oz.
Pints
3.60 15.95
3.60 15.95
MUG003
MUG010
MUG019
MUG021
MUG022
MUG030
MUG031
MUG032
MUG034
MUG037
MUG042
MUG046
MUG050
MUG051
MUG053
MUG057
MUG058
MUG067
MUG068
MUG072
15.95
MUG082
MUG085
MUG087
MUG090
MUG091
MUG092
MUG093
MUG094
MUG097
MUG100
MUG146
MUG198
MUG203
MUG204
MUG205
MUG206
MUG207
MUG208
MUG209
MUG210
MUG211
MUG212
MUG213
MUG214
MUGKIT1
Baby Blue
Crimson
Electra Blue
Leaf Green
Spring Green
Sand
Chocolate
Cocoa
Chestnut Brown
Suntan
Light Yellow
Bright Yellow
Jet Black
China White
Silver Grey
Spice Brown
Harvest Gold
Ivory
Apple Green
Wedgewood Blue
2 oz.
Pints
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60 15.95
3.60
Tucson Turquoise
Orange Sorbet
Regal Purple
Green Mist
True Teal
Lilac
Wild Violet
Pansy Purple
Bright Blue
Terra Cotta
Pink Pink
Dark Grey
Squash Yellow
Orange
Mustard Yellow
Fire Engine Red
Flame Red
Dragon Red
Jade
Forest Green
Olive
Carmel
Cinnamon
Peachy Pink
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
3.60
Underglaze Assortment Kit 2oz
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
15.95
39.00
Printmaking/Stamp Pads
Underglaze Inked Stamp Pads
Use any rubber stamp with this new Underglaze Stamp
Pad to decorate ceramics. Stamp onto bisque, then cover
with a transparent glaze. Test at higher temperatures and
in reduction. 2-oz. refills have a brush in cap to assist
in application. C/06-8. Specify color for both pad and
refill: Black, Blue, Green, Teal, Brown, Gold, Red, White.
PPAD
REPPAD
Potter’s Pad Refill
$10.95
10.95
Printmaking Block Material
Make your own original underglaze stamp art work with
this Printmaking Block Material. Made of a flexible 3/8”
rubberlike material, it is ideal for the curved contours
of pottery. Cut into shapes for decorative borders or
carve your own design directly into the block with a linoleum cutter.
PRINTBLOCK
4” x 6” $2.50
27
Underglazes
Spectrum Superstrokes Underglaze for
Bisque
Specially designed for application to bisque. Superstrokes are
easily intermixable. Try blending 2 or 3 colors together to create new colors. The exceptions are the reds and oranges,
which do not mix well with other colors. Superstrokes come
to a semi-glossy finish when fired without a clear glaze covering.
Colors are stable to shelf cone 5, which means they work well on
stoneware bisque as well, with or without a clear glaze covering.
Superstrokes are ideal for majolica technique and can be used
on top of most commercial low-fire glazes.
Basic Use Directions:
• apply to shelf cone 04/03 bisque
• apply one coat for translucent appearance
• apply up to three coats for solid coverage
• dip or brush clear glaze over Superstrokes
• fire to shelf cone 06/05
Code
Color
SP401
Snow White
SP402Sandman
SP404Banana
SP405
Fizzy Orange
SP406
Sunshine Yellow
SP407
English Rose
SP408
Cotton Candy
SP409Blush
SP410Caramel
SP411
Hot Fudge
SP412
Wally Walnut
SP414
Java Bean
SP415
Black Velvet
SP416
Happy Hippo
SP420
Bashful Beige
SP423
Yummy Yam
SP424
Honey Mustard
SP425
Laser Lime
SP426
Bowling Green
SP427
Leap Frog
SP428
Christmas Green
SP429
Robin Hood Green
SP430
Sherwood Forest
SP431
Oceanic Blue
SP432
Robin’s Egg Blue
SP433
Blue Lagoon
SP434Lavender
SP436
Electric Blue
SP437
Midnight Blue
SP441
Purple Heart
SP442
Mulberry Bush
SP443
Marvellous Mauve
SP444Whine
SP445
Ruby Slippers
SP446
Rosey Cheeks
SP448
Coral Reef
SP449
Terra Cotta
SP455
Storm Cloud
SP456
Sweet Pea Green
SP457
Four Leaf Clover
SP459
Caribbean Blue
SP460
Star Sapphire
28
2 oz. pens
8 oz.
4.50
8.85
4.50
4.50 8.85
4.50
8.85
4.50
8.85
5.75
4.50
4.50
4.50 8.85
4.50
4.50
8.85
4.50
8.85
4.50
8.85
4.50
8.85
4.50
4.50
8.85
4.50
8.85
4.50
8.85
4.50
8.85
4.50
8.85
4.50
8.85
4.50
8.85
4.50
8.85
5.75
10.95
4.50
8.85
4.50
8.85
4.50
5.75
12.95
5.75
10.95
4.50
4.50
4.50
8.85
4.50 8.85
4.50
8.85
4.50
4.50
8.85
4.50
4.50
8.85
4.50
8.85
4.50
4.50
9.95
4.50
9.95
Code
SP461
SP462
SP463
SP464
SP465
SP466
SP467
SP468
SP469
SP470
Color
Frankly Scarlet
Ripe Tomato
Atomic Tangerine
Pea Soup
Sour Grapes
Mystic Purple
Fire Engine Red
Christmas Red
Neon Orange
Hot Pink
2 oz. pens
4.50
4.50
4.50
4.50
5.75
5.75
5.75
5.75
5.75
5.75
8 oz.
8.85
8.85
8.85
8.85
12.95
12.95
10.95
10.95
10.95
10.95
Spectrum Underglazes
A full palette of rich, vibrant colors that are opaque with 3 coats,
semi-opaque with 2 coats and semitransparent with 1 coat. They
are compatible for use under most clear glazes. Spectrum uses
a frit base rather than a slip (clay) base in their underglazes. The
advantages is that the underglazes can be applied on greenware
or bisque and they can be used with or without a clear glaze
covering. When used without a clear glaze cover they have a
matte velvet like surface. However, when used without a clear
glaze cover they are not considered dinnerware safe because
the rough surface can be difficult to clean and can encourage
bacteria growth. All underglaze colors are lead-free, dinnerware safe and A/P non-toxic when covered with a dinnerware safe glaze.
Code
Color
SP501
White
SP502
Ivory
SP503
Light Yellow
SP504
Yellow
SP505
Orange
SP506
Bright Yellow
SP507
English Rose
SP508
Baby Pink
SP509
Flesh
SP510
Tan
SP511
Aztec Brown
SP512
Walnut Brown
SP513
Chocolate Brown
SP514
French Brown
SP515
Black
SP516
Charcoal
SP517
Light Grey
SP518
Taupe
SP519
Chamois
SP520
Light Beige
SP521
Sand
SP522
Tea
SP523Honey
SP524Mustard
SP525
Lime Green
SP526
Mid Green
SP528Chartreuse
SP529
Dark Olive
SP530
Hunter Green
SP531
Prussian Blue
SP532
Sky Blue
SP533Turquoise
SP534Lavender
SP535
Blue Grey
SP536
Bright Blue
SP537
Cobalt Blue
SP538
Blue Velvet
Pint
16.00
24.00
18.00
18.00
22.00
24.00
32.00
24.00
16.00
22.00
20.00
20.00
20.00
20.00
20.00
22.00
18.00
24.00
20.00
18.00
18.00
24.00
24.00
24.00
22.00
28.00
16.00
16.00
32.00
28.00
20.00
22.00
20.00
18.00
28.00
28.00
44.00
Underglazes & Overglazes
Spectrum Underglazes (Continued)
CodeColor
SP539
Navy Blue
SP540
Denim Blue
SP541Purple
SP543Wisteria
SP544Burgundy
SP545Ruby
SP546
Bright Peach
SP547Nectarine
SP548
Rust Red
SP549
Terra Cotta
SP550Salmon
SP551
Med. Pink
SP552Rose
SP553Lilac
SP554
Royal Purple
SP555
Warm Grey
SP556
Light Green
SP557
Leaf Green
SP558Jade
SP559
Blue Green
SP560
Teal Blue
SP561
Dark Red
SP562
Bright Red
SP563
Bright Orange
SP564
Bright Green
SP565
Bright Purple
SP566
Dark Purple
SP567
Fire Engine Red
SP568
Christmas Red
SP569
Neon Orange
SP570
Hot Pink
CMC Dry Gum
Pint
40.00
22.00
36.00
22.00
22.00
24.00
24.00
24.00
18.00
16.00
16.00
16.00
22.00
22.00
46.00
24.00
20.00
22.00
20.00
24.00
20.00
24.00
24.00
20.00
22.00
48.00
48.00
30.00
30.00
30.00
36.00
Spectrum One-Stroke Underglazes
One-Stroke (concentrated underglazes) – Are intended to give opaque
coverage with one brush stroke. They are ideal for painting on designs
and can be used just like underglazes. They have approximately twice
the concentration of color as underglazes and are generally of a thicker
consistency. All our one-stroke colors are lead-free, A/P non-toxic and
dinnerware safe when covered with a dinnerware safe clear glaze.
Code
SP600
SP607
SP608
SP610
SP611
SP613
SP615
SP616
SP621
SP622
SP624
SP626
SP632
SP636
SP637
SP638
Color
Sharp Yellow
Old Rose
Umber
Congo Brown
Jet Black
Golden Yellow
Leaf Green
Pale Jade
Tree Green
Scandinavian Blue
Majestic Blue
Royal Purple
Bright Orange
White
Fire Engine Red
Christmas Red
Pint
32.00
42.00
26.00
26.00
36.00
40.00
37.00
33.00
24.00
28.00
64.00
46.00
32.00
20.00
32.00
32.00
Media for Glazing & Underglazing
Glaze and underglaze may need the addition of a medium to help keep
them in suspension, to enhance their brushability and to improve their
ability to adhere to your ware.
Liquid Pre-mixed Gum
Pre-mixed gum can be added directly to the glaze, engobe, UG or stain
as needed.
LIQGUMP Pint
LIQGUMG Gallon
$ 5.70
25.95
When mixed with water, is a basic glaze/underglaze medium good for all
but the most difficult jobs. Make your own glaze/engobe/UG medium by
adding 1 to 2 tbsp. dry gum to 1 gal. of warm water. Let stand 24 hours
or mix vigorously until gum is completely dissolved. Add gum solution as
needed since some formulas will not require as much as 1 part solution
to 1 part liquid glaze, UG or stain.
CMC-1
CMC-5
1 lb.
5 lb.
$16.04
59.06
Formulated Underglaze Media
This commercially formulated and prepared liquid medium is perfect for
making UG with Mason/Baldwin stains. It provides the necessary suspension, brushability and hardness while working. Mix stain with medium as
needed. Thin with water.
UGMP
UGMG
Pint
Gallon
$ 6.08
48.96
Overglazes: Lusters, Metallics, Etc.
Overglaze refers to the group of colors that are applied to a previously
glazed and fired surface. These overglaze materials are then fired to a
temperature considerably lower than the original glaze firing. Keep in mind
that a satin or matte glaze will provide a satin or matte finish to the luster
or metallic, and a gloss glaze will furnish the glossy finish more commonly
associated with overglazes. In firing an overglaze, the glaze is softened
to the point where the overglaze settles onto the softened surface and
becomes a part of that surface. Overfiring will cause the colors to sink too
deeply into the glaze, resulting in distortion, fade-out or burnout. Underfiring will prevent the glaze from becoming soft enough to receive the color,
thus causing poor adherence. With proper firing, an overglaze decoration
becomes a permanent part of the glaze; and provides a durable, lasting
finish that is not obtainable with any other decorating medium. Depending upon the glaze, fire between C/022-018. Hazards: Not food safe.
Ceramic overglaze materials may present a hazard through inhalation of dusts or fumes while being used and fired. Avoid prolonged
contact. Keep out of reach of children. For additional protection
against fumes, the use of a respirator is recommended.
Duncan “OG” Overglazes
These are superior, richly colored, reliable and easily applied
overglazes with very special lustrous and metallic qualities.
Duncan Liquid Luster
OG803
Mother of Pearl
Duncan Liquid Luster
OG803
Mother of Pearl
Duncan Precious Metallics
OG801
OG802
OG805
Bright Gold
White Gold
Premium Gold Essence
Duncan Gold Essence
OA901
Essence
½ oz.
6.00
½ oz.
6.00
2 gm
2 gm
2 gm ½ oz.
33.37
33.37
44.95
7.20
Kemper Fillable Pens
Excellent for all fired metallics including gold, platinum, lusters,
china ink and china paints. Comes with a hardened, stainless steel, fine or wide writing tip. No moving parts to wear
out. Easy to clean and use: just hold it as you would a pen or
pencil.
GPS
Fine tip
$13.69
GPL
Wide tip
13.69
GPSC
Pen Stem Cleaner 3.69
29
Overglazes
Overglaze Pens
Ferro Ceramic Gold Rush
Pre-filled pens with fine line, felt point. Recommended for thin line,
small area decorating & personalizing work. Disposable.
GPEN
Gold$40.00
Gold Off
Cream to remove fired metallics, purple stains, china paint and
Mother of Pearl.
GFF
Gold Off
1 oz.
13.99
Decals - Make Your Own
Supplies and Instructions to Make Your Own Decals
1. Grind 3 parts dry China Paint with 1 part Decal Media (DCALMD).
2. Adjust as necessary to proper screening consistency.
3. Screen designs onto decal paper (DCALPA).
4. Dry thoroughly, at least 3 hours, before screening on a layer of
Decal Covercoat (DCALCC).
5. To fire, preheat slowly to approximately 800°F, then move rapidly to 1080°F for glass and 1350°F for ceramics.
POR27
Olivine Green
POR29
Amatonite Green
POR31
Green Gold
POR32
Dune Yellow
POR33
Scale Brown
POR35
Calcite Brown
POR37
Esteral Brown
POR38
Topaz Red
POR39
Mummy Brown
POR41
Abyss Black
POR42
Anthracite Black
POR43Ivory
POR44Gold
POR45
Vermerl Gold
POR46
Copper POR47Pewter
9 opaque colors in fine felt tip pens. Great for outlining or writing.
PORPEN1
PORPEN1F
PORPEN2
PORPEN2F
PORPEN3
Decal Covercoat
PORPEN3F
DCALCC-1
1-oz. 3.78
PORPEN4
DCALCCPpint27.93
PORPEN4F
PORPEN5
Decal Paper
PORPEN5F
DCALPA
1 Sheet 12½”L x 18”W 1.99 ea.
PORPEN6
PORPEN6F
Squeegee
Medium-hard plastic applicator for applying decals. Removes air PORPEN7
PORPEN7F
pockets without damaging decals.
PORPEN8
SQUEG
3’ x 4”$3.25
PORPEN8F
PORPEN9
Pebeo Oven-Firing Color
PORPEN9F
Porcelaine 150
Available in 47 colors in 45-ml. (1-1/2-oz) bottles. Note: (T) for transparent; (O) for opaque; (T/O) for semi-opaque.
POR01
Citrine Yellow
POR03
Saffron Orange
POR06
Scarlet Red
POR07
Ruby Red
POR08
Opaline Pink
POR10
Tourmaline Red
POR11
Garnet Red
POR12
Etruscan Red
POR15
Azurite Violet
POR17
Ming Blue
POR18
Sapphire Blue
POR19Emerald
POR20Turquoise
POR24
Opaline Green
POR25
Clay Green
POR26
Malachite Green
30
T/O
T/O
T
T
O
T
T
T
T
O
T
T
O
O
T/O
T/O
6.85
6.85
6.85
6.85
6.85
6.85
6.85
6.85
6.85
7.25
6.85
7.25
7.50
6.85
6.85
6.85
Porcelaine 150 Felt Tip Pens
Decal Media (Oil Base)
DCALMD-1
1-oz.
$ 2.60
DCALMDPpint19.20
Decorate ceramics without a kiln. Porcelaine 150 can be
applied to any heat-stable surface to 300°F: glazed ceramics
and tiles, glass, porcelain, crockery, terracotta, metal, etc.
Creates a durable high-gloss finish that is both microwave
and dishwasher safe. Easy clean-up with water. NONTOXIC. Safe for food contact (not recommended for areas
where cutlery is used.) Follow 5 easy steps:
1. Clean surface of piece with alcohol; 2. Transfer design; 3. Paint
the surface; 4. Allow to air-dry for 24 hours; 5. Place creation in
cold oven; set temperature at 300°F; bake for 35 minutes; turn
oven off and let creation cool.
T
T
T
T
O
T/O
T
T
T
T
T
O
O
O
O
O
Marseille Yellow - Medium
Marseille Yellow - Fine
Agate - Medium
Agate - Fine
Scarlet - Medium
Scarlet - Fine
Feutres Lapis - Medium
Feutres Lapis - Fine
Peacock Blue - Medium
Peacock Blue - Fine
Peridot - Medium
Peridot - Fine
Amazonite - Medium
Amazonite - Fine
Earth - Medium
Earth - Fine
Anthracite- Medium
Anthracite - Fine
$7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
7.50
Outliners
10 paste opaque colors in 20-ml tubes that give a dimensional texture.
Great for outlining or creating raised textured effects.
PORT02
Coral Red
PORT03
Tourmaline Red
PORT04
Ming Blue
PORT05
Bronze Green
PORT06
Anthrocite Black
PORT07Gold
PORT08
Vermeil Gold
PORT09Copper
PORT10Pewter
7.25
7.25
7.25
7.25
7.25
7.25
7.25
7.25
7.25
$6.85
7.25 Pebeo China Pencil
$2.60
6.85 PORCP
6.85 Mediums
6.85
Blend 1/3 medium with 2/3 color.
6.85
Matte Medium
6.85
Obtain a matte effect without thinning the color
6.85
PORMM
$5.25
6.85
Gloss
Medium
6.85
Allows for lightening colors and creating pastel tones without
6.85
thinning.
6.85
PORGM$6.85
7.50
Thinner
6.85
Thins out Porcelaine 150 colors.
6.85
PORTH$7.25
6.85
Non Firing Products - Duncan
Duncan Bisque-Stain
Opaque “OS” Acrylics
These water-based colors have a smooth,
creamy, homogenized consistency. One coat
well brushed onto a C/06 bisque will give
solid coverage or touch up if necessary. Intermix to create an almost endless array of
shades that can also be sponged, spattered
or airbrushed. Clean brushes and tools with
water immediately after use. NONTOXIC
Code
OS431
OS431
OS431
OS432
OS433
OS434
OS435
OS436
OS438
OS439
OS440
OS441
OS442
OS443
OS444
OS446
OS447
OS448
OS449
OS450
OS452
OS453
OS454
OS455
OS456
OS457
OS458
OS459
OS460
OS463
OS464
OS465
OS466
OS467
OS468
OS469
OS471
OS472
OS473
OS474
OS475
OS476
OS476
OS476
OS480
OS481
OS483
OS484
OS485
OS486
OS487
OS488
OS489
OS491
OS492
OS493
OS495
OS499
OS500
Color
White
White - 4 oz.
White - Pint
Ivory
Pale Yellow
Lemon Peel
Dark Yellow
Gold
Orange Peel
Hot Orange
Burnt Orange
Dresden Flesh
Oriental Flesh
Native Flesh
Light Pink
Shocking Pink
Magenta
Peach
Bright Red
Lilac
Purple
Grape
Rust
Holly Red
Baby Blue
Medium Blue
Wedgwood Blue
Bright Blue
Navy
Medium Green
Bright Green
Holly Green
Avocado
Light Brown
Deep Turquoise
Light Turquoise
Medium Brown
Walnut
Black Brown
Grey
Charcoal
Black
Black - 4 oz.
Black - Pint
Garnet Red
Cinnamon
Real Red
Persimmon
French Vanilla
Terra Cotta
Olive Moss
Christmas Green
Saddle Brown
Goldenrod
Angel Flesh
Sandalwood
Chocolate Fudge
Cornsilk Yellow
Snowcloud Grey
2 oz.
2.10
3.40
11.05
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
3.40
11.05
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
Code
OS503
OS504
OS508
OS512
OS527
OS531
OS533
OS541
OS544
OS547
OS549
OS550
OS551
OS552
OS553
OS555
OS556
OS558
OS559
OS560
OS563
OS564
OS565
OS567
OS568
OS569
OS571
OS574
OS579
OS586
OS589
OS590
Color
Barnyard Red
Country Rose
Butterscotch
Liberty Blue
Pale Ivory
Rosy Tan
Rosy Brown
Northern Blue
Rain Forest Green
Bisque White
Prairie Olive
Papaya
Cotton Candy
Raspberry Cream
Glacier Blue
New Leaf
Lemon Grass
Miami Pink
Azalea
Summer Blue
Candy Apple
Pansy
Confederate Blue
Ash
Fire Thorn
Concord
Curry
Burgundy
Sherwood Dark
Ultramarine
Sunflower
Green Tomato
2 oz.
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
Water-based, self sealing colors with a soft,
pearlescent finish. Apply two smooth coats to
bisque. Used for sponging, spattering, detailing
and design work. Can be antiqued with Bisq-Stain
Translucents or used to antique other Liquid Pearl
or Opaque colors. Golden Liquid Pearls have reflective particles for added shimmer. NONTOXIC
1 oz.
$2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
2.10
White Mist
Purple Iris
Ice Blue
Golden White
Champagne Ice
Golden Brown
Golden Ivory
Gold Lame
Glorious Green
Rich Ruby
Black
Duncan No-Fire Snow
Non-fire thick, white, paste-like product looks
like snow or frosting. Use on bisque stain or
glaze. Tint with acrylic stains. NONTOXIC
AS964
4 oz.
Pint
Dazzling beautiful colors that produces the magic of glitter without the mess. Sparkling glitter
suspended in a liquid transparent adhesive can
be used over glaze or stain surfaces for added
sparkling highlights. Permanent and machine
washable, it won’t flake or rub off. NONTOXIC
SG880
SG881
SG882
SG888
SG889
Crystal
Glittering Silver
Glittering Gold
Ruby Red
Emerald Green
2 oz.
$3.75
3.75
3.75
3.75
3.75
Duncan “UM” Ultra Metallics
Rich metallic nonfired paints. Smooth, flowing, even, solid coverage. Water-based. Mix
with other Duncan Acrylics for a variety of
finishes. Self sealing, won’t tarnish or fade.
NONTOXIC.
2 oz.
UM950
UM951
UM952
UM953
UM954
UM955
UM956
UM957
UM958
UM959
Brite Gold
Solid Gold
Antique Gold
Bronze
Copper
Pewter
Silver
Red
Blue
Green
$2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
Duncan Granite Stones “GS”
These colors resemble mountain granite with
their mica-like sparkling flecks and texture. Use
on wood, bisque, glass, plaster, fired glazed
ceramics, papier mache and other craft surfaces - indoors and out. Waterbased for easy
cleanup and no odors or fumes. NONTOXIC
Liquid “PL” Pearls
PL175
PL184
PL187
PL195
PL197
PL212
PL214
PL226
PL232
PL233
PL235
Duncan “Sparkler” “SG”
Brush-On Glitter
4.45
11.25
GS235
GS236
GS237
GS238
GS243
GS248
GS249
GS250
Quartz
Crystalline
Sierra
Sand
Slate
Canyon Rock
Pueblo Sand
Southwest Sand
4 oz.
$5.50
5.50
5.50
5.50
5.50
5.50
5.50
5.50
Duncan “TS” Oil-Based
Translucents
Create an antiqued finish over any Bisque-Stain
product.
TS551
TS562
TS564
TS565
TS566
TS568
TS569
TS570
TS571
White
Sienna
Brown
Black Brown
Black
Tan Sparkle
Buckskin
Pecan Sparkle
Walnut
2 oz.
$2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
2.65
Glittering No-Fire Snow
Similar to AS964, but with a glittering appearance. NONTOXIC
AS974
4 oz.
$4.45
31
Non Firing Products - Duncan & Mayco
Duncan Thin and Shade
Water-based to be used with any other waterbased Duncan ceramic color. Thin colors for
use as a shading medium, create an antiqued
finish over any acrylic product, or mix with any
ceramic color to extend drying time. NONTOXIC
AS957
1.95
2 oz.
Duncan Brush-on SealersDry
quickly to a clear finish.
AS953
Gloss
AS953-8 Gloss
AS954
Matte
AS954-8 Matte
AS955
Satin
AS955-8 Satin
AS959
Hi-Gloss
AS959-8 Hi-Gloss
NONTOXIC
2 oz.
$2.25
8 oz.
7.50
2 oz.
2.25
8 oz.
7.50
2 oz.
2.25
8 oz.
7.50
2 oz.
2.25
8 oz.
7.50
Duncan Spray Sealers “SS”
Final spray coatings that provide a smooth,
hard surface and coatings to brighten and
protect objects decorated with non-fired
color products on just about any surface.
SS330
SS331
SS332
SS334
SS339
Super Gloss
Clear Gloss
Clear Matte
Porcelain
Super Matte
12 oz.
12 oz.
12 oz.
12 oz.
12 oz.
$6.65
6.65
6.65
6.65
6.65
Mayco “Softies Pearls”
High luster pearls for use on ceramic bisque
and other porous surfaces. NONTOXIC.
Code
Description
MSS112 White Metallic Pearl
MSS113 White Iridescent Pearl
1oz
2.75
2.75
Mayco Dazzling Metallics
Use on Ceramic Bisque, fabric or almost any
craft surface. Excellent coverage and brushability.
Code
Description
MSS081 Shimmering Silver
MSS087 Emperor’s Gold
2oz
2.95
2.95
Mayco “Touch ‘n Glo” – Wax
Metallics
Touch ‘n Glo Metallics are a soft creamy wax
metallic paste used for roughing or highlighting.
Code
TL200
TL203
TL204
Description
Brilliant Gold
Renaissance Gold
Brilliant Silver
2oz
2.95
2.95
2.95
Mayco Non-Fired Snow
For realistic snow and dimension.
MAC523 2 oz.
32
2.85
Mayco Magic Metallics
Magic Metallic products are water-based
and will adhere to virtually any surface, creating aged or oxidized finishes. Metallics
can be used alone for a simple metal finish,
or combined with a Patina or Quick Rust
oxidizers for a unique variety of aged finishes.
REAL metal finishes.
MM101 Brass Metallic
MM102 Copper Metallic
MM103 Dark Bronze Metallic
MM105 Gold Metallic
MM106 Steel Metallic
MM200 Verde Green Patina
MM201 Aqua Blue Patina
MM202 Green Patina
MM305 Rapid Rust
MM502 Matte Sealer - 2 oz.
MM600 Spritzer Cap (6/pack)
2 oz.
3.60
3.60
3.60
3.60
3.60
3.25
3.25
3.25
3.25
3.25
1.20
Mayco Softees Acrylic Stains
Mayco “Twinkles”
Mineral Spirit based products shimmer with
small metallic flecks. Use over Softees Acrylics for depth and sparkle
TL300
TL309
1 oz.
Golden Twinkle
2.20
Golden Buckskin Twinkle 2.20
Mayco Sparkling Sandstones
Sparkling Sandstones are a non-toxic, water
based, textured, acrylic stain. which can be
used on ceramic bisque, wood, plaster, Styrofoam, resin, concrete, picture frames, boxes,
flower pots, vases, wicker and terra cotta. The
addition of these textured colors can give any
plain surface a stone-like texture. Sparkling
Sandstones will loose their “sparkling” character
when covered with an opaque color. The whiter
colors of the Sparkling Sandstones work the
best for intermixing to create other shades of
colors in this line.
Artists quality, all purpose acrylic stain. Excel
4 oz.
lent for use on ceramic bisque, fabric, wood,
MCSS3 Grey Siltstone4.75
canvas, paper, and other craft surfaces.
MCSS21 Gold Stone4.75
Perfect for brushing, sponging, stenciling, and
other decrorative
use. NONTOXIC.
Code
Description
2 oz.
Mayco Perfect Touch TransMSS003 Honey Toast
2.20
lucents “TL”
MSS019 Country Sage
2.20
MSS024 Chocolate Fudge
2.20 Oil-based
MSS028 Hushed Violet
2.20 Ideal for dry brushing.
MSS029 Dew Drop Blue
2.20
1 oz.
MSS032 Razzberri
2.20 TL001
Walnut
2.20
MSS045 Buttermilk
2.20 TL004
Black
2.20
MSS057 Accent Green
2.20 TL109
Rich Walnut
2.20 MSS092 Royal Fuchsia
2.20 TL121
Gold Walnut
2.20 MSS111 Brightest Yellow
2.20
MSS127 Medium Portrait
2.20
MSS130 Medium Gray
2.20
Non-Fired Accessories
MSS135 White
2.20
MSS135 White - 8 oz.
6.15
Sealers
MSS138 Flat Black
2.20
Gloss Sealer – brush-on
MSS138 Flat Black - 8 oz.
6.15 MAC501 2 oz.
2.35
MSS141 Light Pink
2.20
MSS176 Christmas Red
2.20 Matte Sealer – brush-on
2.35
MSS179 Antique Red
2.20 MAC502 2 oz.
MSS183
MSS192
MSS194
MSS198
MSS210
MSS211
MSS212
MSS234
MSS237
MSS247
MSS254
MSS276
MSS288
MSS317
MSS331
MSS335
MSS368
MSS376
MSS399
Rich Peach
Light Taupe
Medium Taupe
Chocolate
Orange
Orange Rust
Light Umber
Medium Mocha
Dark Brown
Bright Yellow
Golden Ochre
Forest Green
Bright Green
Turquoise
Medium Blue
Rich Blue
Dusty Violet
Limeburst
Terra Cotta
2.20
2.20
2.20
2.20
2.20
2.20
2.20
2.20
2.20
2.20
2.20
2.20
2.20
2.20
2.20
2.20
2.20
2.20
2.20
Sprays
True Gloss Spray
MAC512 12 oz.
6.45
Matte Spray
MAC514 12 oz.
6.45
Cleaners
Solvent cleaner for antiquing translucents. Use to thin and clean brushes.
MAC520 8.5 oz.
4.90
Brush cleaner to clean and re-condition
brushes.
MAC525 4 oz.
3.15
Mending and Sculpting
Mending and sculpting paste mends
cracks on non-fired finishes.
MAC527 2 oz.
3.35
Mason Stains
Ceramic Stains:
Stains are used to color (or stain) glazes, underglazes, slips and engobes.
Stains are fritted to assure uniformity of results and are therefore superior
to raw oxides; although, even as with oxides, each new batch can vary
and must be tested. Mason offers a color chart of their stains as they
will affect glazes. Nevertheless, no color chart can show you the exact
results you will achieve with every glaze and under every circumstance
and therefore it is suggested that you test first for the desired results. The
descriptive names of the stains will also help you select the colors. To
further assist you in color selection, we offer you seven sample kits each
consisting of 23 teaspoons of selected colors including black and white.
Stain is usually added in amounts of 1-10%: for testing try 8%. Depth
of color will increase as the percentage of stain is increased. If the stain
is stirred into the glaze, a speckled effect results; if added to the glaze
and sieved several times through an 80-mesh sieve, a smooth color is
obtained. Unless indicated, the stain should produce the predicted color
with any glaze, although color will be effected by such variables as the
percent of stain used, the formula of the material to which you are adding the stain, the firing temperature, the atmosphere of your kiln and the
rate of cooling.
Extender Information:
Most stains, except for browns and pinks, can be extended (made more
pastel) by the addition of #6700 White Extender or with small amounts
of tin or zircon opacifiers. To extend chrome tin pinks, use #6067 Pink
Extender. #6700 and 6067 are excellent whites by themselves.
Two Ways to Make Underglaze:
#7000 UGM & #6908 Flux are two media which can be used to make
underglaze. Test each in proportions as directed in 1 &2 (add water to
either amounts necessary to achieve your desired consistency.)
1. Mix one part liquid #7000 UGM to two parts stain.
2. Add 2 parts dry #3195 Frit to 1 part dry stain.
Additional Stain Information:
1. Stains may be blended to produce other colors.
2. Oranges, pinks, yellows and purples are sometimes fugitive at
high temperatures or in reduction atmospheres.
3. For purer, more even and intense color, grind the stain with a little
water & spatula on a glass slab or with a mortar & pestle.
Note:Stains in the raw state may be different colors from batch to batch,this will not effect the fired color.
Mason Glaze Stain Color Chart
A beautiful, accurate color chart of all the Mason glaze stains (body stain samples are not included in color chart.) The colors represent glaze fired
to C/2 with an addition of 10% stain. Included with the color samples is a complete list of all Mason stains, their oxide composition and reference
notes. MASON-PPC
$7.95
STAINS IN STOCK - PRICE PER POUND
No.
Use
Color
Composition
1/4 lb.
1/2 lb.
1 lb.
5 lbs.
Notes
CAS Number
PINKS/CRIMSONS
6000
**
Shell Pink
CrSn
7.80
15.58
31.13
155.63
3,5,9
68187-12-2
6001
**
Alpine Rose
CrSn
7.80
15.58
31.16
155.60
3,5,9
68187-12-2
6003
**
Crimson
CrSn
7.80
15.58
31.13
155.63
3,5,9
68187-12-2
6006
**
Deep Crimson
CrSn
7.80
15.58
31.13
155.66
3,5,9
68187-12-3
6020
*
6032
Pink Body Stain
MnAl
3.98
7.95
15.88
79.38
1,3
68186-99-2
Coral
ZrFe
4.95
9.88
19.75
98.75
3
68187-13-2
BROWNS
6100
***
Woodland Brown
CrFeZnAlSi
4.21
8.38
16.75
83.75
3,6,7
68186-88-9
6101
***
Chestnut Brown
CrFeZnMn
3.98
7.95
15.88
79.38
3,6,7
68186-96-9
6103
***
Golden Brown
CrFeZnAl
4.20
8.38
16.75
83.75
3,6,7
68186-88-9
6107
***
Dark Golden Brown
CrFeZnAl
4.05
8.08
16.13
80.63
3,6,7
68186-88-9
6108
***
Walnut Brown
CrFeZnMn
4.13
8.25
16.50
82.50
3,6,7
68186-96-9
6109
***
Deep Brown
CrFeZnAl
4.46
8.88
17.75
88.75
3,6,7
68186-88-9
6111
***
Spice Brown
FeSnZn
5.05
10.08
20.13
100.63
3,6,7
68186-88-9
6113
***
Claret Brown
CrFeZn
3.20
6.38
12.75
63.75
3,6,7
68186-88-9
6121
***
Saturn Orange
CrFeZnAl
4.20
8.38
16.75
83.75
3,6,7
68186-88-9
6126
***
Hazelnut Brown
CrFeZnAl
4.23
8.45
16.88
84.38
3,7
68186-88-9
6129
***
Golden Ambrosia
AlCrFeZn
4.13
8.25
16.50
82.50
3,6,7
68186-88-9
6131
*
Titanium Iron Brown
TiFe
3.68
7.33
14.63
73.13
1a,3,7
68187-02-0
6153
***
Seal Brown
CrFeZnMn
3.33
6.63
13.25
66.25
3,6,7
68186-96-9
6160
***
Dark Chocolate Brown
CrFeZnAl
3.35
7.08
14.13
70.63
3,6,7
68186-96-9
6190
***
Deep Brown/Seal
CrMn
3.25
6.50
13.00
65.00
3,6,7
68555-06-6
*Can also be used as a body stain. **Use in zincless glazes with a calcium content of 12-15%. ***Best results when used with zinc.
+Avoid the inhalation, ingestion and absorption of ceramic raw materials; may be harmful to your health. See Health Hazards in Index.
Material Safety Data Sheet; MSDS, with complete CAS numbers are available with purchase upon request.
33
Mason Stains
STAINS IN STOCK - PRICE PER POUND
No.
Use
Color
Composition
1/4 lb.
1/2 lb.
1 lb.
5 lbs.
Notes
CAS Number
GREENS
6200
**
Evergreen
CrCoSi
4.43
8.83
17.63
88.13
3,5
68187-49-5
6201
*
Celadon Green
CrCoZnAlSi
4.26
8.51
17.00
85.00
1,3,6,8
68187-49-5
6204
**
Victoria Green
CrCaSiZr
4.43
8.83
17.63
88.13
3,5,9
68559-10-5
6206
**
Grass Green
CrCaSiZr
3.78
7.58
15.13
75.68
3,5,9
68553-10-5
6207
*
Celeste Green
CrCoAnAl
4.00
8.00
16.00
80.00
1,3,6
68187-49-5
6209
**
Chrome Green
CrSi
6.08
12.13
24.25
121.25
3,5
68909-79-5
Hemlock
CoCrMnZn
6.10
12.20
24.38
121.88
1,3,8
68187-49-5
6219
*
French Green
CrCoZnCaSi
4.36
8.70
17.38
86.88
1,3,5,8
68187-49-5
6223
**
Ivy Green
CrAlSi
5.08
10.13
20.25
101.25
3,5
68909-79-5
6213
6236
*
Chartreuse
SnVCr
8.98
17.95
35.88
179.38
1,3,6
68186-95-8
6242
*
Bermuda Green
ZrVPr
5.73
11.45
22.88
114.38
3,6
68186-95-8
6254
*
Dark Teal Green
AlCoCrSiZn
7.25
14.50
29.00
145.00
1,3,6,8
68187-49-5
6255
*
Jade Green
AlCoCrSiZn
6.83
13.63
26.13
136.25
1,3,6,8
68187-49-5
6263
**
Victoria Green
CrCaSiZr
4.38
8.76
17.50
87.50
3,5,9
68553-01-5
6264
**
Victoria Green
CrCaSiZr
4.30
8.58
17.13
85.63
3,5,9
68553-01-5
6268
*
Sea Green
CrCoZnSi
5.35
10.70
21.38
106.88
1,3,6,8
68187-49-5
6274
*
Nickel Silicate
NiSi
6.35
12.70
25.38
126.88
1,3
68515-84-4
Avocado
ZrVCrFeCo
6.14
12.26
24.50
122.51
3,6
68187-01-9
CoSiZn
8.61
17.20
34.38
171.88
1,3,6
68412-74-8
6280
BLUES & PURPLES
6300
*
Mazerine Blue
Violet
CrSn
12.40
24.83
49.63
248.13
1,3,5,9
68187-12-2
6305
*
Teal Blue
CrCoAlSiZn
5.58
11.13
22.25
111.25
1,3,6
68187-49-5
6306
*
Vivid Blue
CoAlSiZn
5.33
10.63
21.25
106.25
1,3,6
86186-96-7
6304
6308
*
Delphinium Blue
CoAlSn
6.35
12.70
25.38
126.88
1,3,6
68608-09-3
6310
*
Wedgewood Blue
CoAlSi
7.25
14.51
29.00
145.00
1,3,6
68186-86-7
6313
*
Medium Blue
CoSiZn
6.81
13.58
27.13
135.63
1,3,6
68412-74-8
6320
*
Delft Blue
CoAlSiZnSn
9.33
18.63
37.25
186.25
1,3,6
68186-86-7
6338
*
Cobalt Meta Silicate
CoSi
11.51
23.00
46.00
230.00
1,3,6
68187-40-6
6339
*
Royal Blue
CoAlZn
6.13
12.25
24.50
122.50
1,3,6
68187-40-6
6360
**
Willow Blue
CoAlSi
7.08
14.13
28.25
141.25
3,5
68187-12-2
BLUES & PURPLES
6363
*
Sky Blue
CoAlSi
3.61
7.20
14.38
71.88
1,3,6
68186-40-6
6364
*
Turquoise Blue
CoZnAlSi
5.25
10.50
21.00
105.00
1,3,6
68186-95-8
6368
*
Copen Blue
CoZnAlSi
4.13
8.26
16.50
82.50
1,3,6
68187-40-6
6371
*
Dark Teal Blue
CrCoAl
7.75
15.50
31.00
155.00
1,3,6
68187-49-5
6376
*
Robin’s Egg Blue
ZrV
4.70
9.38
18.76
93.76
1,3,6
68186-95-8
6381
**
Blackberry Wine
CrSnCoSiCr
FeNi
7.80
15.58
31.13
155.63
3,5,9
68187-12-2
6383
*
Cobalt Aluminate
CoAl
8.61
17.20
34.38
171.88
1,3,6
68186-86-7
6385
**
Pansy Purple
CoCrSnCaSi
7.85
15.70
31.38
156.88
3,5,9
68187-12-2
6388
*
Mazerine Blue
CoSi
9.13
18.25
36.50
182.50
1,3,6
68187-40-6
*Can also be used as a body stain. **Use in zincless glazes with a calcium content of 12-15%. ***Best results when used with zinc.
+Avoid the inhalation, ingestion and absorption of ceramic raw materials; may be harmful to your health. See Health Hazards in Index.
Material Safety Data Sheet; MSDS, with complete CAS numbers are available with purchase upon request.
34
Mason Stains
STAINS IN STOCK - PRICE PER POUND
No.
Use
Color
Composition
1/4 lb.
1/2 lb.
1 lb.
5 lbs.
Notes
CAS Number
YELLOWS
6404 *
Vanadium Yellow
SnV
10.68
21.35
42.71
213.51
1,3,6
68186-93-6
6410
Canary Yellow
PrSiZr
4.73
9.45
18.88
94.38
3,6
68187-15-5
6450
Praseodymium
PrZrSi
6.60
13.20
26.38
131.88
3,6
68187-15-5
6464 *
Zirconium Yellow
ZrV
6.30
12.58
25.13
125.63
1,3,6
68187-01-9
6471 *
Old Gold
SnVCrFeZnAl
6.06
12.08
24.13
120.63
1,3,6
68186-95-8
6500 *
Sage Grey
CrCoSiNi
5.13
10.25
20.50
102.50
1,3,6
68186-89-0
6503 **
Taupe Grey
CrFeAlSiZr
3.13
6.25
12.50
62.50
3,5
68186-97-0
6591
Gun Metal
CoNiZr
5.38
10.75
21.50
107.50
3,6
68186-89-0
GREYS
BLACKS & WHITE
6600 *
Black
CrFeCoNiSn
6.60
13.20
26.38
131.88
1,3,6
68186-97-0
6612
Onyx
CoCrFeNi
8.83
17.63
35.25
176.25
1,3,6
68186-97-0
6616 *
Chrome Free Black
CoFeMn
7.36
14.70
29.38
146.88
1,3,6
68187-50-8
6650 **
Cobalt Free Black
CrFe
5.23
10.45
20.88
104.38
3,5
68187-09-7
6657 **
Black
CrFeCo
5.06
10.08
20.13
100.63
3,5
68186-97-0
6666 **
Cobalt Free Black
CrFeMn
5.38
10.75
21.51
107.51
3,5
68555-06-6
6700
White (Extender)
ZrAlSi
3.35
6.70
13.38
66.88
3,6
10101-52-7
REDS & ORANGES (Encapsulated Zirconium-Cadmium-Selenium Stains for high-fire reds and oranges)
6025 *
Coral Red
ZrSiCd
9.63
19.25
38.50
192.50
1,3,6
72828-62-7
6026 *
Lobster
ZrSiCd
11.46
22.88
45.75
228.75
1,3,6
72828-62-7
6027 *
Tangerine
ZrSiCd
9.63
19.25
38.50
192.50
1,3,6
72828-62-7
6028 *
Orange
ZrSiCd
12.48
24.96
49.88
249.38
1,3,6
72828-62-7
6088 *
Dark Red
ZrSiCd
14.48
28.95
57.88
289.38
1,3,6
72828-62-7
MISCELLANEOUS
No.
Description
Composition
Pint
Gal.
1 lb. 5 lbs.
FRIT3195
Underglaze Flux for C/06
SiCaBAlNaK
3.50 12.63
UGM
Underglaze Medium - Liquid**
6.08 48.96
**TEST - Add as needed. Suggested Ratio: 2 parts stain to 1 part underglaze medium.
CAS#
68997-18-4
1332-58-7
NOTES:
1. Can be used as a “body stain ” in porcelain at high temperatures.. All of the brown colors can be used as “body stains ” but will vary in
shade considerably depending on the composition of the body and temperature at which it is fired.
1a. Use only as “body stain.” Firing temperatures can only be a rough guide.Firing at 2200 °F on a slow schedule may give the equivalent
maturing as firing at 2300 °F on a fast schedule.The cycle,atmosphere and rate of cooling will affect the color.
2. Max. firing limit 2156 °F (1180 °C)
3. Max. firing limit 2300 °F (1260 °C)
4. Max. firing limit 1956 °F (1080 °C)
5. Do not use in zinc glaze. Zinc oxide influences color in a glaze more than any other element. Generally, zincless glazes should contain no
magnesium oxide. Some colors containing zinc are to be used in a zincless glaze. The zinc in the color is in a combined form and will not harm the
color, but free zinc oxide in the glaze can destroy the color.
6.May be used with zinc or without zinc.
7.Zinc not necessary but gives better result.
8.Best result with no zinc. Calcium Oxide content as calcium carbonate should be between 12-15%for best color development.Adding the
molecular equivalent of calcium oxide with wollastonite,a natural calcium silicate,often gives better uniformity.The increased silica from the
wollastonite must be subtracted or the glaze will have a poor surface.
9.Glaze must contain 6.7 to 8.4%CaO (12-15%CaCo 3 )
FIRST AID
Eye Contact: Irrigate with water at least 15 minutes. Consult physician if discomfort persists. Skin Contact: Remove contaminated
clothing. Wash skin with soap and water. Inhalation: Remove to fresh air. Consult physician. Accidental Ingestion: Induce vomiting if
conscious. Consult physician. Spill or Leak: Contain spill. Pick up and place in an approved container for disposal in accordance with
Federal, State & Local laws. Call for further information: Mason Color Chemical Works, Inc. (330) 385-4400 / Ceramic Supply (973) 340-3005
35
Glossary
Protect Your Health
Many materials used by ceramists are potentially hazardous to your health. Some
are immediately irritating; others accumulate in the body and become more toxic with
continued exposure. Any of these ceramic
materials in the dry powdered form can be
inhaled and cause damage to the lungs.
Free silica (flint) which is a component in
all clay bodies, can lead to scarring of the
lungs and silicosis. Inhaling, ingesting
or handling other chemicals can result in
problems ranging from dermatitis and allergies, to nervous and muscular disorders &
even cancer. For additional material data &
safety information call (973) 340-3005.
Safety Precautions:
· Do not eat, drink or smoke in work
area.
· Do not sweep, but, rather sponge &
wet mop surfaces to prevent raising
dust. For large areas use a dust collection system.
· Do not brush or shake out your
clothes, but, rather wash frequently.
· Wear a respirator that meets NIOSH
regulations (especially when mixing
clay and glazes).
· Wear gloves to prevent absorption
through the skin.
· Wear heat resistant gloves to protect
against heat from the kiln.
· Wear goggles against flying particles
when grinding or chipping on ceramics.
· Wear goggles against harmful rays
when looking into the kiln.
· Vent your kiln room and spray area.
· Be sure all materials are kept out of
the reach of children.
Potentially Hazardous Materials
Here is a partial list of the materials used
by potters and ceramists which have been
found to be potentially most toxic: Free
silica from many clays, flint, feldspars,
and talc; Metallic oxides, carbonates, etc.,
especially antimony, barium, beryllium,
cadmium, cobalt, chromium, copper, lead,
lithium, manganese, nickel, potassium
bichromate, selenium, uranium, and vanadium; Fumes from kiln firing (both electric
and gas) that can be produced are fluorine,
chlorine, sulfur dioxide, metallics, and in
gas kilns, carbon monoxide.
Toxicity Hotline
The Chemical Manufacturers Association
has installed a hotline to answer questions about toxicity, disposal procedures
& other problems related to chemicals in
products. (800)262-8200.
36
Glossary of Chemicals and
Raw Materials
This Glossary is offered as an attempt
to answer some of the most often asked
questions about chemicals as used in
ceramics and pottery. It is by no means
a complete definition of these materials. If you have any further questions
please feel free to write or call us. In our
book section are several good reference
manuals.
~~~ A ~~~
Alumina Hydrate (AI2O3-3H2O) - Promotes
stability & hardness in glazes. Used in kiln
wash & as a wash to keep lids from sticking to
pots or pots to shelves. CAS#21645-51-2
Aluminum Oxide (AI2O3) - Calcinated alumina hydrate; in glazes will promote strength
and matteness; usually added to a glaze
through feldspar or clay.
CAS#1344-28-1
~~~ B ~~~
Barium Carbonate (BaCO3) - May promote
matteness in low-fire glazes and hardness and
brilliance in high-fire glazes. TOXIC in raw
slate; insoluble in water. CAS#513-77-9
Bentonite (AI2O3-4SIO2-9H2O) - Very plastic
clay; used as a plasticizer in clay; as a suspension agent in glazes. 1-2% may be added
to dry mix. CAS#1302-79-9
Bone Ash [Ca3(PO4)2] - Ground, calcinated
animal bones; used in porcelain bodies as a
flux and to help promote translucence. Used
as a flux in high fired glazes; gives texture to
low fired glazes. CAS#68439-84-1
Borax (Na2O-2B2O-10H2O) - Source of boron
(see Boric Acid). Used in low-fire glazes as
a flux in place of lead. Fritted form is more
stable. Soluble.
CAS#1303-96-4
~~~ C ~~~
Calcium Carbonate - See Whiting
Chromium Oxide (Cr2O) - Extremely potent.
Usually produces greens in glazes used with
tin may produce pinks, with zinc, and browns.
CAS#1308-38-9
CLAY (AI2O3-2SIO2)
BALL CLAY CAS#1332-558-7 - Fine grained
(hence very plastic), light-burning clays used
in stoneware bodies to increase dry strength
and vitrification upon firing. A source of
AI2O3+SIO2 in glazes, used to raise firing
temp.
Kentucky OM4
Kentucky Special
SPG#1
Tennessee #5
Tennessee #10
XX Sagger - XX Sagger is a ball clay used as
fire to clay and to make saggers.
CHINA CLAY (KAOLIN) - Very fine, clean,
white or cream refractory clay which when
fired to maturity will become vitreous and
translucent. Used to make white-ware, china,
and porcelain. CAS#1332-558-7
English Grolleg - Very plastic, white English
clay; used to promote translucence in porcelain bodies.
EPK - A plastic Florida clay also used in
glazes.
FIRE/BODY CLAYS - High refractory, more
coarse than ball clay, may contain iron, calcium, manganese and other impurities.
A.P.G. Missouri Fire Clay CAS#14808-60-7
Goldart CAS#1332-558-7 - Refractory clay of
fair plasticity for bodies.
Hawthorne Misssouri Fire Clay
CAS#1332-558-7
Plastic Vitrox CAS#14808-60-7 - May be
substituted for feldspar (half and half) to lower
the firing temp.
Redart - High iron content, plastic clay, usually used to produce earthenware bodies.
CAS#1332-558-7
Cobalt Carbonate (CoCO3) - Will produce
shades of blue, will speck if not sufficiently
sieved; approximately 60% of the strength of
the oxide form. CAS#7542-09-9 & 3333-67-3
Cobalt Oxide (Co3O4) - Small amounts (usually less than 2%) will give strong blue color. In
combination with other elements will produce
pinks, purples, greens or black.CAS#1308-061 & 1313-99-1
Cobalt Sulphate (CoSo4,5H2O) See: SULPHATES. CAS#10026-24-1
Copper Carbonate (CuCo3) - May yield green
& turquoise in oxidation or red in reduction
with a slight fluxing reaction. Copper glazes
may tend to volitize at higher temperatures
& affect the color of the pieces around them.
Carbonate form is more toxic than the oxide.
CAS#12069-69, 10214-40-1, 7440-50-8
Copper Oxide (Black cupric oxide - CuO)
- See: COPPER CARBONATE. Black cupric
oxide can be soluble in fruit juices & should
not be used on ware intended for food or
beverages. CAS#7440-50-8
Copper Sulphate Crystals 21% (Cupric)
(FeSo4-7H2O) See: SULPHATES. CAS#779-99-8
Copperas (Iron Sulphate) (Ferrous) (FeSo45H2O) See: SULPHATES. May produce reds
and violets at low temperatures. CAS#7782-63-0
Crimson Stain - Produces pinks through
crimson. (See index - Mason Stains)
Glossary
~~~ D ~~~
Dolomite [CaMg(CO3)2] - Will flux stoneware
glazes; may produce buttery glaze finish.
Insoluble source of magnesia; approx. 2% can
be added to porcelain body.CAS#16389-99-1
~~~ F ~~~
FELDSPARS - A natural glaze at high
temperatures. The primary source of alumina
and silica for glazes. Usually classed as potash spars (those containing potassium as their
characteristic component) or soda spars (those
containing more sodium). Other oxides are
often present.
Cornwall Stone (CaCO, NaK2O-AI2O3-8SiO2)
- May act as a flux in bodies; contributes sodium to glazes. Green dye has been added for
identification purposes; it burns out when fired.
Non-defluorinated. CAS#64876-25-5
Custer (typical: K2O-AI2O3-6SiO2) - High potash
spar may be used in a glaze where a type of
feldspar is not specified. CAS#64876-25-5
F-4 Kona (typical: Na2O-AI2O3-6SiO2) - A soda
spar. Mix with equal portion of potash spar for
Kona A-3 substitute. CAS#64876-25-5
G200 (typical: K2O-AI2O3-6SiO2) - A potash
spar. CAS#64876-25-5
Nepheline Syenite (K3O-3Na2O-4AI2O38SiO2) - May be used to introduce sodium;
when used to replace other spars it will lower
the melting point of the glaze. CAS#3724496-5
Flint (Silica) (SiO2) - Basic glass-former in
both bodies & glazes, increases hardness
and resistance to wear. Used to remedy
crazing in glazes when added to either glaze
or clay. In glazes it will reduce thermal
expansion; in bodies it will promote thermal
expansion. Warning: Contains Free Silica.
Do not breathe dust. Prolonged inhalation
may cause delayed lung injury (silicosis).
Follow OSHA safety standards for handling.
CAS#744-44-2
Fluorspar (CaF2) - Used as an opacifier; may
also be substituted for whiting to assist fusion.
Over 5% may cause blistering. Its use in a glaze
changes colors one would normally expect from
pigments. CAS#14542-23-5
FRITS - Chemicals that have been combined,
melted, cooled& ground to a fine powder. This
procedure renders certain soluble materials
insoluble & in particular circumstances will render toxic materials less toxic. All frits are fused
silicate glass substances. Manufactured for use
as a reliable glaze and body fluxes.
CAS#65997-18-4
Ferro 3110-A leadless, high soda, low-borate
glaze & body flux. C/3-5
Ferro 3124-Soda-calcium-borosilicate.C/3-5
Ferro 3134(Hommel 14, Pemco 54) - High
soda-calcium, low potash-borosilicate, used in
art glazes. C/06-04
Ferro 3195-Calcium borate, low temperature
alkaline. C/08-04
Ferro 3249 - A low expansion leadless frit used
primarily for bonding alumina metal. Coefficient
of expansion 4.05. Fusion point 1900oF. Can be
used as a glaze frit high in magnesium and boron.
Ferro 3269(Similar to Hommel259, Pemco 25)
- Soda-borate-zinc frit. Contains a small % of
fluorine. Used for low temp. glazes. Test as a
substitute for 3819.
Ferro 3824-High soda, borate, zinc. A substitute for lead when fired to 150°F or higher.
~~~ G ~~~
Gerstley Borate - (A colemanite, 2CaO-3B2O35H2O) - Source of almost insoluble boric oxide;
may prevent crazing or promote opacity. A
powerful flux. CAS#12007-56-6, 1319-33-1.
Also see Gillespie Borate or Plastic Borate.
(Limited quantities.)
Gillespie Borate - A blended borate mineral for
use in glaze formulas replacing Gerstley Borate
calculated on a pound for pound basis. Mixture
of ulexite blended with various clay minerals and
alkaline earth carbonates ands silicates.
Grog/Molochite - Pre-fired ground clay added
to “open” bodies to give texture and strength.
Will assist drying by decreasing shrinkage &
warping. Adds fired strength. Grog is typically
added to buff & dark clay; Molochite is added
to porcelain & other white clays. See Nylon &
Sand. CAS#1332-58-7
Gums (CMC and Veegum T) - Organic substances used to promote glaze suspension and
adhesion and hardness of glaze to ware before
firing. Also see Macaloid. CAS#12199-37-0
~~~ I ~~~
Iron Chromite (FeCrO3) - A colorant usually
used to produce dark colors in engobes & underglazes. 2% will produce grays, browns with
zinc, good in crystalline glazes. CAS#1308-38-9,
7439-89-6,1344-28-1,1309-48-4
Iron Oxide (Black, Fe3O4), (Red, Fe2O3), (Yellow, Fe2O3-3H2O) - The varieties of irons mined
- black, red, yellow - each give slightly different
results. For consistent glaze effects it is best to
stick with one source of iron. As a general rule,
iron used in small amounts (under 10%) will
produce browns, buff & rich reds in glazes. In
larger quantities, may act as a flux. Synthetic
irons are processed to meet specific standards
& are more reliable. CAS#1309-32-1
Iron Sulphate (Ferrous) Copperas (FeSo7H2O) - See SULPHATES.
CAS#7782-63-0
4
~~~ K ~~~
Kiln Wash - A mixture of refractories used to
coat kiln shelves to protect them from glaze.
CAS#7631-86-9, 1332-8-7
Kyanite (AL2O3-SiO2) (Mullite) - Used as a
grog for a very strong clay body with good
resistance to thermal shock. CAS#13002-76-7
~~~ L ~~~
Lithium Carbonate (Li2CO3) - Source of
lithium; a flux in leadless glazes; may promote
brightness and increase firing range of glaze.
CAS#143077-3-8 ~~~ M ~~~
Macaloid - See VEEGUM T. CAS#12199-37-0
Magnesium Carbonate/Oxide (MgCO3)/(MgO)
- Insoluble source of magnesia; flux in high temperature glazes; may promote buttery surface,
strength and color in glazes. CAS#546-930/1309-48-4
Manganese Diox./Carbonate
(MnO2)/MnCO3)
- (Powder) Colorant; may produce purples,
pinks, browns & blacks.
- (Granular) Granular form will give speckled
effect. CAS#7439-96-5, 598-62-9
Molochite - White grog. (See GROG)
Mullite - See Kyanite
~~~ N ~~~
Nickel Carbonate (Ni2CO3) (green) - A colorant;
may produce browns, greys and muted greens.
Usually added to influence & modify other colorants. CAS#7420-02-0
Nickel Oxide (Ni2O3) (black) - Similar but
more concentrated than the carbonate form of
Nickel. CAS#1313-99-1
Nepheline Syenite (K3O-3Na2O-4AI2O3-8SiO2)
- May be used to introduce sodium; when used
to replace other spars it will lower the melting
point of the glaze. CAS#37244-96-5
~~~ O ~~~
Ochre, Yellow - Impure iron oxide; use as a
colorant source of iron. CAS#51274-00-1
Opax - (Zirox, Treopax) - A zirconium oxide.
Commercially prepared opacifier; promotes
color stability. CAS#1314-23-4
~~~ P ~~~
Pearl Ash - See Potassium Carbonate.
Petalite (Li2O-AI2O3-8SiO2) - A source of
lithium & silica; a body flux that reduces
thermal expansion & increases thermal
shock resistance. Often used in flameware.
CAS#68476-25-5
Plaster (Gypsum) - Casting, #1 Potters, Potters, Ultracal, Hydrocal, Hydrostone, Ultrox,
Tuf-cal (see index)
Plastic Borate - See BORAQ
Plastic Vitrox - See clay. CAS#14808-60-7
Pumice - See VOLCANIC ASH
37
Glossary
Pearl Ash - See Potassium Carbonate.
Petalite (Li2O-AI2O3-8SiO2) - A source of
~~~ R ~~~
Rutile (TiO2) (LIGHT & DARK) - Titanium
oxide - (powdered)-tan colorant containing
small amounts of iron; may produce creams,
oranges & tans in glazes; may also modify
more potent colorants.
~~~ S ~~~
Sand, Silica (SiO2) - A smoother substitute,
with less tooth, for grog. CAS#7631-86-9
Silver Carbonate - Generally used as a glass
colorant, gives large color range depending
on the glass composition & firing atmosphere.
Produces lusters. CAS#7761-88-8
Soda Ash (NaCO3) - Highly soluble. Soda
ash glazes should be used immediately or
stored dry. Used as a deflocculant in slip casting clays. CAS#497-19-8
Sodium Bicarbonate (Na2CO3-10H2O)
- Soluble in water, used in Egyptian paste.
CAS#144-55-8
Sodium Silicate (Na2O-SiO2) - Used to deflocculate casting slip & as a cement to secure insulation blankets to metal drums. CAS# 10588-01-9
Spodumene (Li2O-AI2O3-4SiO2) - Source of
lithia, similar to petalite. Valuable in flameware
bodies due to its low thermal expansion. In
glazes it promotes copper blue tones; may
also correct crazing. Carries some impurities of iron. Chemical grade is available.
CAS#1633-05-2
Stains - Prepared colorants for glaze, underglaze, slip, engobes, and clay; see Mason
Stains in index. For non-fired products and
bisque stains refer to index.
Strontium Carbonate (SrCo2) - Similar to
calcium. Used as a glaze flux. Slightly soluble
& craze resistant. CAS#1633-05-2
Sulfates - Cobalts, copper & iron join with sulphur to form a salt. At low temps, will give luster & other special effects to glaze and body.
Effective in overglaze & raku. CAS#7782-63-0
Superpax (ZrSiO2) - also known as Ultrox
500W. Opacifier. See Ultrox.
~~~ T ~~~
Talc (3MgO-4SiO2-H2O) - Source of insoluble
magnesium. Used in earthenware bodies
since it lowers the fusion point. In glazes it
may promote opacity. Its structure is similar
to asbestos & it is not known what its health
hazards are. Therefore, handle with care
in the powder form to avoid creating dust.
Clean with a moist cloth rather than a broom.
CAS#14807-96-6
38
Tin Oxide (SnO) - Opacifier; renders a softness, depth & beauty as in Majolica ware.
When used in excess (10%+) it will dull the
surface of the glaze. CAS#18282-10-5
Titanium Dioxide (TiO2) - Opacifier; may
tend towards cream color. Rutile is a form of
titanium that also contains iron.
CAS#7440-32-6
Treopax - (Zirox) Known as Opax. Opaciifer.
~~~ U ~~~
Ultrox (ZrSiO2) also known as Zircopax A.
Ultox 500W known as Superpax. Opacifiers.
CAS#14940-68-2, 14808-60-7
~~~ V ~~~
Veegum T (Macaloid) - Fires to a good white
color. Can be used in glazes as a hardener,
suspending agent & to increase drying rate
of glazes; plasticizing agent for non-plastic
formulations such as high alumina or zirconia
bodies; a binder in extruded bodies. Should
be added as a water dispersion. Optimum
results obtained with 1/2% to 2% dry weight.
CAS#12199-37-0
STAY INFORMED AND STAY HEALTHY
Learn and stay informed about the potential health hazards associated with ceramic material use. The Ceramic Supply catalogue offers a large amount of information
that you should carefully read. Also, read
labels, follow use & care instructions and
do your own safety research. There are
many informative websites including the
manufacturers who post safety and proper
use information. The Chemical Manufacturers Association has a hotline to answer
questions about chemical toxicity, use and
disposal. Call 800-262-8200.
Be sure you comply with OSHA requirements. Properly post that Material Data
Safety Sheets (MSDS) are available for
your employees to read. Ceramic Supply maintains active files with all MSDS
Sheets for the materials we sell. Call us
to order MSDS Sheets.
Do your research, take the time to be informed.
Ceramic Supply’s liability is limited to the
sale of the chemicals and ceramic materials only. We are not responsible for it’s
use.
Volcanic Ash (Pumice) (Formula varies.
Usually contains MgO, CaO, NaO, K2O,
AI2O3, Fe2O3, SiO2, Cl3, + H2O) - Decomposed
rock, may be used as flux in stoneware glazes. (CAS# varies - see feldspar, clay, silica)
~~~ W ~~~
Whiting (CaCo3) - A high temperature flux
which promotes durability and hardness in
glazes. At low temperatures in large quantities
it will be refractory. CAS#1317-65-3
Wollastonite (CaSiO3) - Calcium silica source.
Reduces shrinkage & promotes resistance to
thermal shock in body. CAS#13983-17-0
~~~ Z ~~~
Z
Zinc Oxide (ZnO) - In small quantities
(2%) acts as a flux & reduces crazing. In
larger quantities it acts only as a flux. Prefer
calcined zinc for better fit on pots in the
raw state. Has a strong effect on colors.
CAS#1314-13-2
Zircopax A (ZrSiO2) known as Ultrox - Opacifier. Assures exceptional uniformity of opacity,
texture & color over a wide firing range. Gives
a hard, shiny, scratch resistance surface;
resists crazing. CAS#14940-68-2, 14808-60-7
It is recommended that the
producer of any for-sale dinnerware have their finished-ware
tested by an approved laboratory to determine whether or
not it meets FDA guidelines in
its own category BEFORE IT IS
PUT ON THE MARKET.
Chemicals
Packaging is done for ease of storage,handling & dust containment. All 1/4,1/2 and 1 lb.packages come in resealable,reusable plastic containers.
The 25-lb.packages come in 3 1 /2 gallon or 5 gallon resealable,reusable plastic buckets with handle.
*Prices are subject to change due to material price fluctuations.
Chemical
Bag
Abstracts
Price Per PackageSize
Price Per Bag
Service #
Order No. Chemicals/Raw Materials
1/4 lb. 1/2 lb.
1 lb. 5 lb. 25 lb.
lbs.
1 Bag
5 Bags
CAS#
ALHY Alumina Hydrate 3.50 15.00 63.54
50
95.08
94.08 21645-51-2
ALOX Aluminum Oxide 4.43 17.69 76.75 50 139.50 138.50 1344-28-1
BARCARB B Barium Carbonate 4.25 18.75 93.78 55 149.96 148.96 513-77-9
BENT Bentonite 2.50
6.50 28.06
50
27.00 26.00
1302-78-9
BONE Bone Ash 2.50 10.00 35.54 50 40.00 39.00 68439-84-1
BORAX Borax 1.45
7.25 45.00 50 57.98 56.98 1303-96-4
BORIC Boric Acid 4.50 18.00 88.00 50 144.00 143.00 10043-35-3
CHROM C Chromium Oxide 10.35 51.76 258.80
50 517.60 516.60 1308-38-9
CLAYS:
BALL CLAYS
OM4 Kentucky OM4 1.17 3.50 20.80 50 12.28 11.28 1332-58-7
TENN5 Tenn #5 Ball Clay 1.37 3.95 23.02 50 13.10 12.10 1332-58-7
TENNXX TENN XX Sagger Ball Clay .75
1.10
5.00 21.44 50 17.00
16.00
65997-18-9
EPK GROLL 6TILE APG GOLDART HAW VITROX REDART CHINA CLAYS (KAOLIN)
EPK -Plastic Kaolin -Florida 1.50
6.00
Grolleg -English Plastic 1.50
7.57
SPECIAL CLAYS
#6 Tile Clay 1.80 8.73 A.P.G.Missouri Fire Clay Gold Art -Cedar Heights Fire 1.50 3.50
Hawthorne -Missouri Fire 1.50 3.50 Plastic Vitrox (Body Clay)
1.70 5.00 Red Art -Cedar Heights Earthenware 1.50 3.63
COBCARB COBOX COBSUL CUCARB CUOX -BK CUOX-RD CUSUL IRSUL CROC -RD CROC -YL CRYO DARVAN D DOLO F
CORN CUSTER KONA F4 G200 NEPHSY FLINT200 FLINT325
FLOR FRIT 3110 FRIT3124 FRIT3134 FRIT3195 FRIT3269 FRIT3249 23.36
37.61
50 55
15.54 39.46
14.54 38.46 1332-58-7
1332-58-7
23.44 34.16 21.16 21.40 24.56 21.62 50 55 50 50 50 50 18.81 42.27 11.46 14.88 28.00 12.20 17.81 41.27 10.46 13.88 27.00 11.20 65997-18-9
14808-60-7
1332-58-7
14808-60-7
14808-60-7
14808-60-7
Cobalt Carbonate Market Pricing
Cobalt Oxide Market Pricing
Cobalt Sulfate Market Pricing
Copper Carbonate 11.93 59.96 298.31
50
477.93
476.93
Copper Oxide -Black 11.89 59.45 292.81
50
Copper Oxide -Red 14.79 61.50 266.58
50
Copper Sulfate 4.00 18.75 69.00 50 130.00
129.00 Copperas Sulphate (Iron Sulphate)
2.50
9.00 47.50 50 68.00 67.00 Crocus Martis -Red 5.48 21.93 87.75 50 131.00 130.00
Crocus Martis -Yellow 5.20 26.00 159.00 55 286.00 285.00 Cryolite 4.42 17.70 70.83 50 95.26 94.26 Darvan #7,Defloculant (Also see Sodium Silicate)$8.00 per Pint$45.00 per Gallon
Dolomite 1.07 2.65 22.66 50 13.30 12.30 FELDSPAR
Cornwall Stone (Potash/Soda/Calcium)
3.92 15.73 60.310 55 107.61 106.61 Custer (Potash)
2.23 9.97 25.69 50 20.48 19.48 F4 Kona (Soda) (NC-4)
1.10 3.13 14.05 50 13.50 12.50 G200 Potash 1.80 8.50 23.54 50 18.86 17.86 Nepheline Syenite,Peak (Soda Feldspar )
1.56
4.77 21.36 50 19.40 18.40
Flint (Silica) 200 Mesh 1.50 5.00 20.48 50 15.00 14.00 Flint (Silica) 325 Mesh
1.80
6.00 20.82
50
16.00
15.00
Fluorspar 2.00 9.00 68.28 50 87.13 86.13 FRITS,FERRO -LEADLESS
3110 3.50 14.08 60.78 50 88.30 87.30 3124 =Hommel 90 3.62 10.68 56.96 50 81.09 80.09 3134 =Pemco 54/Hommel 14 3.74 11.71 61.59 50 89.00 88.00
3195 =Hommel 399 3.50 12.63 67.80 50 101.00 100.00
3269 Suggested substitute for 3819.TEST 3.50 12.75 63.75 50 102.00 101.00
3249 Low Expansion with Magnesium Carbonate 3.80 17.11 93.00 50 129.00 128.00 3333-67-3
1313-99-1
10026-24-1
10214-40-1
7440-50-8
7758-99-8
7782-63-0
1309-37-1
1309-37-1
1344-28-1
54193-36-1
16389-88-1
64876-25-5
64876-25-5
64876-25-5
64876-25-5
64876-25-5
7444-44-2
7444-44-2
14542-23-5
65997-18-4
65997-18-4
65997-18-4
65997-18-4
65997-18-4
65997-18-4
39
Chemicals
Packaging is done for ease of storage,handling & dust containment. All 1/4,1/2 and 1 lb.packages come in resealable,reusable plastic containers.
The 25-lb.packages come in 3 1 /2 gallon or 5 gallon resealable,reusable plastic buckets with handle.
*Prices are subject to change due to material price fluctuations.
Chemical
Bag
Abstracts
Price Per PackageSize
Price Per Bag
Service #
Order No. Chemicals/Raw Materials
1/4 lb. 1/2 lb.
1 lb. 5 lb. 25 lb.
lbs.
1 Bag
5 Bags
CAS#
GBORATE G Gillespie Borate (Gerstley sub)
1.90
7.50 38.56 50 45.10 44.10 12007-56-6 &
GERSTLY Gerstly Borate 2.09
8.00 41.83 50 44.40 43.40
GROG M Grog -M-20-48 1.50 5.00 24.86
50 22.03 21.03
See Glossary
GROG F Grog -F-48 mesh 2.50 5.00 24.92
50 21.41 20.41 See Glossary
CMC Gum -CMC (dry)
16.04 59.06 9004-32-4
LIQGUM p/g Gum -LIQGUM (liquid) Pint: 5.70 Gallon 25.95
VEEGUM Gum -Veegum T (Macaloid)(dry)
10.06 47.75 207.00
301.25
300.25 12199-37-0
HYCAL H Hydrocal - See Plaster Page 42
65997-15-1
HYST Hydrostone - See Plaster Page 42 65997-15-1
ILMENG I Ilmenite Granular 4.13 15.14 33.40 50 112.50 111.50 8-1,Glossary
ILMENP Illmenite Powder
2.96 11.25 49.40
50
112.50
111.50
IRCHRO Iron Chromite 3.97 8.69 35.62 50 86.94
85.94
8-1, Glossary
IRON -BK Iron Oxide,Black 3.46
6.90 34.50 172.50
50 276.00
275.00 1309-38-2
IRONSPEC Iron Oxide,Red Special (used for glaze) 1.80
3.25 17.11 83.00 50 140.00
139.00 1309-38-1
IRONSPAN Iron Oxide,Spanish Red -gen used for clay 1.79
8.95 52.03
55 68.00
67.00 1307-37-1
IRON-YL Iron Oxide,Yellow (Ochre,Yellow)
1.15
2.30 11.54 63.12 50 92.00 91.00 51274-00-1
IRSUL Iron Sulphate (Copperas)(Ferrous Sul)
2.50 9.00 47.50 50 68.00 67.00 7782-63-0
KWASH K Kiln Wash 2.05
6.30 33.34 50
34.56
33.56
1332-58-7
KYAN Kyanite (Mullite),35 Mesh 2.81 11.25 36.26 100 81.00
80.00 1302-76-7
660
L Latex - 660 Brush-on moldmaking , Liquid Pint: 9.80Gallon: 58.955-Gallon: 263.80
L200 Latex - L200 Casting Compound, Liquid Pint: 9.80
Gallon: 59.30
5-Gallon: 275.20
LITHCARB Lithium Carbonate 13.05 65.25 326.05 14307-35-8
VEEGUM M Macaloid (Veegum T)
10.06 47.75 207.00
301.25
300.25 12199-37-0
MAGCARB Magnesium Carbonate 5.28 26.41
326.05
325.05 546-93-0
MANGCARB Manganese Carbonate 12.58 62.88 292.88
50 553.44 552.44 598-62-9
MANGP Manganese Dioxide -powdered 2.88 10.45 44.52 50 68.00 67.00 1313-13-9
MANGG Manganese Dioxide -granular (20 mesh)
2.50
9.00 43.00 50 68.00 67.00 MOL 30 Molochite -White Grog 30 Mesh
2.90 12.00 51.26 55 77.52 76.52 133258-7
MOL200 Molochite - White Grog 200 Mesh
3.00 12.70 50.50
55
69.00
68.00
Missouri Fire Clays (See Clay:Hawthorne Missouri Fire or A.P.G.Missouri Fire 808-60-7
NEPHSY
N Nepheline Syenite, Peak (Soda Feldspar) 1.56
4.77 21.36 50 19.40 18.40
37244-96-5
NIKCARB Nickel Carb,Green 16.25 32.50 65.00 175.89
NIKO-BK Nickel Oxide,Black 14.00 28.00 55.00 275.00 1313-99-1
NIKO-GR Nickel Oxide,Green 15.90 30.38 60.76 303.75
1313-99-1
NYFIB Nylon Fiber 7.23 31.38 156.88 1313-99-1
IRON-YL
O Ochre,Yellow (Iron Oxide,Yellow)
1.15
2.30 11.54 63.12 50 92.00 91.00 51274-00-1
POTCARB P Pearl Ash (Potassium Carbonate)
4.10 20.50 102.50
50 164.00 163.00
584-08-7
PETAL Petalite 3.34 13.35 58.74 55 97.07 96.07 68476-25-5
915/914 Plaster:Specify 915 Casting or 914 Pottery - See Plaster Page 427778-18-9
914SP #1 Pottery Plaster - See Plaster Page 42
7778-18-9
VITROX Plastic Vitrox (Body Clay)
1.70
5.00 24.56 50 28.00
27.00
14808-60-7
PUMICE Pumice (Volcanic Ash)
2.50
8.50 27.00 50 38.00
37.00 1332-09-8
PYRO Pyrophylite 1.94
6.69 20.88 50 24.91
23.91 12269-782
REDART R Red Art -Cedar Heights Earthenware Clay 1.50 3.63 21.62 50 12.20 11.20 14808-60-7
RUTLT Rutile -Light 4.11 20.55 98.22
50 190.10 189.10 13463-67-7
RUTDK Rutile -Dark 3.18 15.08 75.38 50 120.60
119.60 13463-67-7
RUTG Rutile -Granular 3.11 12.43 56.50 50 85.00 84.00 13463-67-7
WARNING:Avoid the inhalation, ingestion & absorption of ceramic raw materials; may be harmful to your health. For more information on
Health & Safety, see Index. For health &safety non-emergency chemical information,call the Chemical Referral Center: 1 (800)262-8200.
Material Safety Data Sheets:MSDS,with complete CAS numbers,are available with purchase upon request.
Disclaimer: The Chemical and Raw Material products listed on this page are sold without warranty,express or implied &upon condition
that purchasers shall make their own tests to determine the suitability of these products for their particular purposes.
40
Chemicals
Packaging is done for ease of storage,handling & dust containment. All 1/4,1/2 and 1 lb.packages come in resealable,reusable plastic containers.
The 25-lb.packages come in 3 1 /2 gallon or 5 gallon resealable,reusable plastic buckets with handle.
*Prices are subject to change due to material price fluctuations.
Chemical
Bag
Abstracts
Price Per PackageSize
Price Per Bag
Service #
Order No. Chemicals/Raw Materials
1/4 lb. 1/2 lb.
1 lb. 5 lb. 25 lb.
lbs.
1 Bag
5 Bags
CAS#
SAND S
FLINT200 FLINT325
SILVCARB SODA SODBI SODSIL SPOD STRON ULT500 TALC
T
TENN5 TENNXX 6TILE TINOX TITAN UGMG U
UGMP ULTROX ULT500 ULTRA VEEGUM V
PUMICE WAX W SY547 WHIT WOLL ZINC Z
Sand,Silica 1.50
5.00 19.22 50 15.00
14.00 7631-86-9
Silica (Flint) 200 Mesh 1.50
5.00 20.48 50 15.00
14.00 7444-44-2
Silica (Flint) 325 Mesh
1.80
6.00 20.82 50 16.00
15.00
Silver Carbonate 1/2 oz. 94.08 1 oz. 188.16 7761-88-8
Soda Ash 1.28 5.15 36.46 50 40.90 39.90 497-1981
Sodium Bicarbonate 1.00
4.98 35.92 100 80.88
79.88 497-1981
Sodium Silicate,Defloculant (water glass) Pint 7.05 Gallon 24.99 1344-09-08
Spodumene,Chemical (2%Iron)
3.00 12.50 35.00 55 53.36
52.36 1633-05-2
Strontium Carbonate 4.19 18.14 60.83 55 104.18
103.18 1633-052
Superpax (Ultrox 500W)Zircon 3.95 16.88 83.50 50 135.11
134.11 8-2 &14808-60-7
Talc, Texas
1.50
3.00 22.10 50 12.20
11.20 See Glossary
Tenn #5 Ball Clay 1.37 3.95 23.02 50 13.10 12.10 1332-58-7
TENN XX Sagger Ball Clay .75
1.10
5.00 21.44 50 17.00
16.00 65997-18-9
#6 Tile Clay 1.80 8.73 23.44 50 18.81 17.81 65997-18-9
Tin Oxide 12.08
24.06
48.11 240.50 978.00 18282-10-5
Titanium Dioxide 2.15
4.28
8.55 42.75 192.46 55 342.00
341.00 13464-67-7
Under Glaze Media -Gallon 48.96
Under Glaze Media -Pint 6.08
Ultrox (Zircopax A)(Zirconium Silicate)
4.33 21.70 108.50 50 110.00
109.00 See Glossary
Ultrox 500W (Superpax)(Zirconium Sil.)(Zircon)
3.95 16.88 83.50 50 135.11 134.11 8-2 &14808-60-7
Ultracal 30 - See Plaster Page 42
50 65997-15-1
Veegum T (Macaloid)
10.06 47.75 207.00
301.25
300.25
Volcanic Ash (Pumice)
2.50
8.50 27.00 50 38.00
37.00 1332-0-98
Wax Resist -High Grade Pint 5.25 Gallon 32.86 71808-29-2
Wax Resist -Duncan Best Grade 2 oz. 2.50
Whiting CaCo 3 (Marble Dust)(Precipitated Chalk) 1.50 3.70 18.26 55 23.20 22.40 1317-65-3
Wollastonite 2.00
7.50 24.66 50 31.00
30.00 13983-17-0
Zinc Oxide 5.00 25.00 115.98 55 199.94 198.94 1314-13-2 Iron
WARNING:Avoid the inhalation, ingestion & absorption of ceramic raw materials; may be harmful to your health. For more information on
Health & Safety, see Index. For health &safety non-emergency chemical information,call the Chemical Referral Center: 1 (800)262-8200.
Material Safety Data Sheets:MSDS,with complete CAS numbers,are available with purchase upon request.
Disclaimer: The Chemical and Raw Material products listed on this page are sold without warranty,express or implied &upon condition
that purchasers shall make their own tests to determine the suitability of these products for their particular purposes.
Weight (Mass)
1 ounces =28.352 grams 1 pound =453.5924 grams 1 pound =0.4536 kilogram 1 gram =0.0353 ounce 1 kilogram =2.2046 pounds CONVERSIONS
Capacity (Liquid)
1 fluid ounce =29.5729 milliliters 1 pint =0.47317 liter 1 dry pint =0.55 liter 1 quart =0.9463 liter 1 dry quart =1.1 liters
1 gallon =3.7853 liters
1 milliliter =0.034 •uid ounce
1 liter =33.815 •uid ounces
1 liter =2.1134 pints
1 liter =1.0567 quarts
1 liter =0.9 dry quart
Weight and Volume of Water
1fluid ounce water =29.573 grams
1 pint water =473.167 grams
1 quart water =946.333 grams
1 gallon water =3785.332 grams
41
Plasters
Industrial Plaster and Gypsum Cements
Soft Gypsum: Casting Plaster, Pottery Plaster, #1 Pottery
Plaster
Hard Gypsum: Hydrocal, Hydrostone, Ultracal, FRG95
Most durable and dimensionally stable. Use for models, throwing or
working bats, master molds and production casting.
Highly absorbent, less durable and least dimensionally stable. Use for
limited casting runs, wedging and drying bats, slip and waste molds,
etc.
FRG95 Hyrodcal Industrial Plaster (hard)
#1 Casting Plaster (soft)
White Hydrocal (hard)
Pottery Plaster (soft)
Ultracal 30 (hard)
An excellent plaster offering chip resistance, strength and a slight non-absorbent
surface suitable for painting or 3 dimensional art projects. Not recommended for
slip casting molds.
Our general all purpose plaster recommended for most slip casting applications
in the ceramic industry because of its absorbency, however it will not hold mold
detail on a cast piece as long as #1 Pottery Plaster.
#1 Pottery Plaster (soft)
An ideal plaster used in the industry. It is the industry standard formulated to
provide stronger, longer-lasting mold detail on cast objects.
A unique blend of polymer – modified, fibered gypsum plaster and Hydrocal
Gypsum Cement. Engineered to provide higher green strength and greater chip
and impact resistance.
For casting where strength and hardness count; as in figurines, commercial
casts, patterns and sculpture. Good expansion, useful to compensate for the
shrinkage of many casting materials.
Excellent surface hardness and compressive strength. The most accurate gypsum available. Excellent for foam latex and pressure molds.
Hydrostone (hard)
Extremely hard & durable with an expansion even greater than that of hydrocal.
Used for master molds & rampressing.
PRICING Price Per Package
Product Order Code 5 lb. 25 lb. Bkt. 1 Bag 5 Bags Price Per 50 lb. Bag
10 Bags 20 Bags
40 Bags
#1 Casting Plaster 915 $2.26 Pottery Plaster 914 #1 Pottery Plaster 914SP 6.00 White Hydrocal HYCAL Hydrostone HYST Ultracal30 ULTRA Hydrocal Industrial FRG95 $16.86 15.96 16.00 22.46 24.96 26.20 29.40 14.86
13.96
14.00
20.46
22.96
24.20
27.40
$24.72 24.30 24.32 27.64 29.24 17.50 19.33 $18.36 17.46 17.50 23.96 26.46 27.70 30.90 $17.36 16.46 16.50 22.96
25.46 26.70 29.90 $15.36 14.46 14.50
20.96 23.46 24.70 27.90 CAS#
7778-18-9
7778-18-9
7778-18-9
65997-15-1
65997-15-1
65997-15-1
26499-65-0
Combine assorted full bags for best price. All Full Bag Gypsum products come in Easy to Handle 50-lb. bags.
25-lb. quantities come in a 5 gallon resealable, reusable plastic bucket with handle.
General Instructions and Physical Characteristics
Hand Mix
Generally acceptable for small batches up to 5
lbs.; however, since optimum physical properties
are in direct relation to energy input in mixing,
hand mixing will not result in a plaster cast with
the best properties.
Product
#1 Casting Plaster
Pottery Plaster
#1 Pottery Plaster
FRG95
White Hydrocal
Ultracal 30
Hydrostone
Use Consistency
Parts of Water by
Weight per 100 Parts
of Plaster
65
74
70
50
45
38
32
Mixing Directions
Sift or strew plaster into water slowly and evenly.
Do not drop handfuls of plaster directly into the
water. Allow plaster to soak for 2 to 4 minutes,
then mix as required, generally 2 to 5 minutes,
to obtain a creaming of the slurry. Always add
plaster to water, never the reverse.
Set Time
Minimum Dry
% Setting
Minutes
Compressive
Expansion
Approximate
Strength (psi)
Maximum
27-37
2,400
0.220
27-37
1,800
0.190
27-37
2,000
0.210
27-37 3,5000.220
25-35
5,000
0.390
25-35
6,000
0.080
17-20 10,0000.240
#1 Pottery Plaster – Water to Plaster Ratio
water
½ pt.
1 pt.
1 ½ pts.
1 qt.
1 ½ qts.
2 qts.
2 ½ qts.
3 qts.
3 ½ qts.
4 qts/
4 ½ qts.
42
plaster
11 oz.
1 lb. 6 oz.
2 lbs. 4 ozs.
2 lbs. 12 ozs.
4 lbs. 2 ozs.
5 lbs. 8 ozs.
6 lbs. 14 ozs.
8 lbs. 4 ozs.
9 lbs. 10 ozs.
11 lbs.
12 lbs. 6 ozs.
water
5 ½ qts.
6 qts.
7 qts.
8 qts.
9 qts.
10 qts.
11 qts.
12 qts.
13 qts.
14 qts.
15 qts.
plaster
15 lbs. 2 ozs.
16 lbs. 8 ozs.
19 lbs. 4 ozs.
22 lbs.
24 lbs. 12 ozs.
27 lbs. 8 ozs.
30 lbs. 4 ozs.
33 lbs.
35 lbs. 12 ozs.
38 lbs. 8 ozs.
41 lbs. 4 ozs.
Mechanical Mixing
For best results, use a high-speed, direct-drive
propeller mixer such as Jiffy Mixer (see Index.)
For uniformity of batches, remember to weigh
both water and plaster. Always use fit-to-drink
water at the same temperature (best between 70
- 100°.)
Clay Bucket
Sturdy, flexible-rubber mixing
buckets with strong handles.
Easily cleaned. Dry plaster,
glaze, cement, etc. breaks loose by flexing. For use with liquids and solids; for
carrying, mixing, pouring and storing.
BUK3
3-gallon
$20.00
1 Pt. Water = 1 LB – 1 to 1 3/8 by weight
In converting from cubic inches to quarts, use the formula:
cu. in./ 80 = no. of qts. of water
note: 1 qt. water + 2 lbs. 12 ozs. plaster will make about 80
cubic inches of solid plaster.
note: for water, 1 pt. = 1 lb (“ A pint’s a pound the world
round.”) For calculating volume, use equations (where r =
radius,
h = height, and π = 3.14):
Volume of cylinder: V = π r 2h
Volume of cube = V = length x width x height
Equipment - Kilns
Choosing Your Electric Kiln
This catalog includes a wide selection of kilns that offer units designed for economy as well as those with the most advanced
professional features available. In order to properly select your kiln, you must first check with your electrician and-or utility company as to the energy available. See Electric Kilns Energy Information below. Also, consider the space limitations
in the location where you plan to place the kiln. Allow a minimum of 18" between the kiln and the closest wall or object.
One of the most important decisions when starting in ceramics is the apropriate choice of a pottery kiln. One of the largest purchases in any ceramics studio is the kiln. Choosing the correct kiln brand, size, and venting sysems will insure an efficient use of time and money. The goal is to have a kiln that is safe, reliable, and easy to fire, while also allowing for future growth.
A Reputable Ceramics Supplier
Before purchasing any ceramic supplies or equipment, consider the company that stands behind their product or service. this will be the most important decision you will make when
purchasing an electric kiln. Look for a local ceramics supplier who has a good business reputation and offers full service to its customers. Choose a supplier with a kiln repair service.
Remember all electric kilns come with factory warranties but if a problem develops you will be dealing with the dealer directly. Often it is possible to obtain a lower price on any specific
item such as a pottery kiln, or a potter’s wheel. However, if a problem develops or you need an answer to a technical question many “discount” suppliers will not be responsive or
adequate for your needs. Also, make sure the dealer is an authorized dealer for the manufacturer that you select. It is best to buy from a “full service” dealer with a good reputation.
Kiln Size (The Right Fit Matters)
The size of the kiln depends in part on the amount of ceramic objects that you produce over a given period of time. The size of the objects will also require the appropriate size kiln. Potters should also consider a kiln that will allow for future expansion of their work. However, choosing a kiln that
is too large will cause a longer waiting period before the pots or sculpture are finished. Firing the kiln half empty to speed up the process is wasteful and can contribute to uneven kiln firings and defects in the glaze. Too small a kiln size will require labor intensive and expensive loading and firing cycles with no room allowed for future growth in producing ceramic objects. Please call the kiln staff for advice on the proper kiln size for your needs.
Kiln Venting Systems
As in kiln firing controls there are two basic types of venting systems. The external venting system is composed of a conical hood placed a few inches above the kiln lid. This system does not actively draw out kiln fumes from the kiln but captures the passive exhaust from the firing kiln. The active venting system draws room air through the top of the kiln.
The air is then exhausted out of the kiln floor though a flexible 4” aluminum dryer type hose. Both systems will remove the smell caused by burning organic material in the clay
during the first part of the bisque firing. Call us (Ceramic Supply) for details on the appropriate venting system for your kiln. We recommend a venting system for all electric kilns.
Electric Kilns: Energy Information
Before you purchase a kiln you must determine the circuit
size (amperes) & the voltage available to you. You may have
to enlist the services of a licensed electrician. The fuse in
the power box can determine the amperes. The volts can
be read in your line with a voltmeter. The normal voltage
available is 110/115/120v. In addition, you will need the following information about your voltage: first, is there 220/240v wiring
already installed? Second, is the voltage the electric company supplies 208v or do they supply the full 220/240v? To help answer these
questions, see the following explanation as it applies to kiln users.
A word about Volts.
Voltage is written to show normal fluctuation as follows:
110/115/120v & 208v or 220/240v.
• 110/115/120 volts is the range of normal household energy. Virtually all buildings have 110/115/120-volt wiring. This energy is enough to fire china painting, pottery,
ceramics, glass, enamel, doll making & test kilns of up to
about 1 cubic foot. (Amps may vary from 14-20) For your
convenience we have grouped together the Household
Current 110/115/120v Kilns
• 208v or 220/240 volts is the energy required for heavy appliances, motors & larger kilns. Not all buildings are wired for
220/240v. You may have to increase the wiring for the kiln you
require. Consult a licensed electrician. Additional information and complete specifications are listed on each kiln page.
Know the difference between 208 & 220/240 Volts.
Electric companies may normally supply as little as a 208v or as much
as 220/240v to customers who have installed 220/240v wiring. In
addition, electric companies who normally supply 220/240v may occasionally supply only 208v or less. This may happen on a so-called
“brown-out day” when, for example, many air conditioners are in use &
the demand for electricity is extreme. If your kiln needs 220/240v to
operate at peak efficiency, you may find that on “brown out days” you
have trouble reaching maximum temperature. In Metropolitan areas
& other high demand areas, it is not uncommon to have only 208v
of electricity as the normal supply, not just an occasional shortage.
Safety Control, Firing & Monitoring Devices
There are wide ranges of safety controls available to the kiln buyer.
These include firing and soaking controls, automatic shutoffs, limit timers & pyrometers. When properly used, they help guard against overfiring & under-firing. We believe that the automatic shutoff & safety
timers are so important that we include them as standard equipment on
most models (kilns without these features are available on special order.) Additional devices can be added at the time of purchase or at any
time in the future. For more information on these devices see Index.
Kiln Replacement Parts
We stock elements & replacement parts for kilns in this catalog. In addition, we also stock elements & replacement
parts for some kilns not in this catalog, including discontinued models. We will special order parts as needed.
Kiln Furniture
In order to utilize the kiln to its maximum capacity, the proper assortment of kiln furniture (shelves or posts) is necessary. Shelves
are designed to fit the different kilns. For a complete selection, see
Index for Kiln Furniture. For your convenience, complete furniture kits have been put together based on normal load usage.
Repair Service
We have a complete repair service for kilns of almost any make and model. A qualified repairperson is available in our service area. Please call
for an appointment and rates: (973) 340-3005.
Malfunctions can result from a mismatch between the kiln & its power supply. Read the above carefully and consult with a
licensed professional to determine the power necessary.
43
Equipment - Kilns
Make the smart choice. Find out why Skutt is the number one
selling kiln in America
•
•
•
•
•
•
•
•
•
Hand Select Brick. Long lasting uniform insulation.
Balanced Elements. Even heat top to bottom.
Spring Assisted Lid. Safe and effortless opening.
Sectional Design. Easy to move, easy to repair.
Smart Materials. Stainless steel, powder coating resists corrosion.
Welded Stand. Pre-assembled and built to last.
2 Groovers Per Brick. Uniform radiation and more loading capacity.
UL Listed for safety assurance
2-Year Warranty.
Skutt Electric Kilns
Skutt “top of the line” kilns offer a model suited for almost every need. All models offer interlocking sectionalized construction making
brick and element replacement simple. Full trough grooves with pinned Kanthal elements provide excellent heat distribution. Other
features include air-cooled switch box, coated dust-free lid with locking lid brace, stainless steel jacket & reversible top and bottom
slabs. All kilns are UL listed except the 609 and 614. Long term value. Factory replacement parts are readily available and easy
to install. All kilns are backed by a two-year limited warranty, the best in the industry.
Model
POWERTEMPERATURE CHAMBER
Phase Volt Amps Watts Cone Temp Cu.Ft. Opening Depth Ship Wt.
Item No.
1627-3PK (3 ” brick
production kiln)
1231-3PK (energy-saving 3 ” brick, production kiln)
1227-3PK (energy-saving 3 ” brick, producution kiln)
1227-3 (energy-saving 3 ” brick)
1222-3 (energy-saving 3 ” brick)
1218-3 (energy-saving 3 ” brick)
1027 1027-3 (energy-saving 3 ” brick)
1022 1022-3 1018 1018-3 (3 ” brick)
822
822-3
(3 ” brick)
818 818-3 (3 ” brick)
714 614-3 (3 ” brick)
609 GlazeTech
44
3
240
66
3
208
76
1
240 72 1
208 80 3
240 44.5 3
208 51.5 1
240 60 1
208 69 3
240 40 3
208 46.7 1
240 48 1
208 48 3
240 29.3 3
208 31.7 1
240 48 1
208 48 3
240 34.6 3
208 40 1
240 48 1
208 48 3
240 29.3 3
208 31.7 1
240 48 1
208 48 3
240 29.3 3
208 31.7 1
240 48 1
208 48 3
240 29.3 3
208 31.7 1
240 48 1
208 48 3
240 34.6 3
208 34.6 1
240 48 1
208 48 3
240 34.6 3
208 34.6 1
240 39.4 1
208 40 1
240 39.4 1
208 40 1
240 33.4 1
208 38.5 1
240 33.4 1
208 38.5 1
240 27.8 1
208 26.7 1
240 27.8 1
208 26.7 1 208/240 20 1
115 20 1
115 17 1 208/240 17/20
23600
23600
17300 16640 17300 17300 14300 14300 14300 14300 11520 9980 11520 11000 11520 9984 11520 11520 11500 11500 11520 11000 11520 9980 11520 11000 11520 9980 11520 11000 11520 9984 11520 9984 11520 9984 11520 9984 9460 8320 9460 8320 8000 8000 8000 8000 6660 5550 6660 5550 3600 2300 1950 4000
10
10
10 10 10 10 10 10 10 10 8
5
8
8
10 8
10 10 10 10 10 10 10 6
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8
6
6
10
2350
2350
2350 2350 2350 2350 2350 2350 2350 2350 2300 2185 2300 2300 2350 2300 2350 2350 2350 2350 2350 2350 2350 2250 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2350 2300 2250 2250 2350
18.5
18.5
11.6 11.6 11.6 11.6 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 8.1 8.1 8.1 8.1 6.6 6.6 6.6 6.6 7
7
7
7
6.4 6.4 6.4 6.4 5.7 5.7
5.7
5.7
5.7 5.7
5.7
5.7
4.6 4.6 4.2 4.2 3.2 3.2 2.9 2.9 2.6 2.6 2.3 2.3 1.4 0.8 0.6 1.1
46 x 30.75 27
46 x 30.75 27
28.13 31 28.13 31 28.13 31 28.13 31 28.13 27 28.13 27 28.13 27 28.13 27 28.13 27 28.13 27 28.13 27 28.13 27 28.13 27 28.13 27 28.13 27 28.13 27 28.13 18 28.13 18 28.13 18 28.13 18 23.38 27 23.38 27 23.38 27 23.38 27 22.38 27 22.38 27 22.38 27 22.38 27 23.38 22 23.38 22 23.38 22 23.38 22 22.38 22 22.38 22 22.38 22 22.38 22 23.38 18 23.38 18 22.38 18 22.38 18 17.5 22 17.5 22 16.5 22 16.5 22 17.5 18 17.5 18 16.5 18 16.5 18 14.38 13.5 11 13.5 11 9
14.5 x 14.5 9
Price with
Kiln Master
Item No.
Price with
Kiln Sitter
535
KM1627PK-3PH 6335.00
NA 535
KM16273PK2083P 6335.00
NA
450 KM1231-3PK 3990.00
NA
450 KM1231PK-208 3990.00
NA
450 KM1231PK-3PH 3990.00
NA
450 KM1231PK2083PH 3990.00
NA
410
KM1227PK 3875.00
NA
410 KM1227PK-208 3875.00
NA
410 KM1227PK-3PH 3850.00
NA
410 KM1227PK2083PH 3850.00
NA
400
KM1227-3 3285.00
SK1227-3 2990.00
400
KM1227-3-208 3285.00
SK1227-3-208 2990.00
400
KM122733PH 3335.00
SK122733PH 3285.00
400
KM122732083PH 3335.00
SK122732083PH 3285.00
330
KM1222-3 3010.00
NA
330
KM1222-3-208 3010.00
NA
330
KM122233PH 3060.00
NA
330
KM122232083PH 3060.00
NA
330 KM1218-3 2775.00
NA
330 KM1218-3-208 2775.00
NA
330 KM121833PH 2825.00
NA
330 KM121832083PH 2825.00
NA
290
KM1027 2770.00
SK1027 2485.00
290
KM1027-208 2770.00
SK1027-208 2485.00
290
KM10273PH 2820.00
SK10273PH 2780.00
290
KM10272083PH 2820.00
SK10272083PH 2780.00
320
KM1027-3 2850.00
SK1027-3 2560.00
320
KM1027-3-208 2850.00
SK1027-3-208 2560.00
320
KM102733PH 2900.00
SK102733PH 2855.00
320
KM102732083PH 2900.00
SK102732083PH 2855.00
290
KM1022 2490.00
NA
290
KM1022-208 2490.00
NA
290
KM10223PH 2540.00
NA
290
KM10222083PH 2540.00
NA
290
KM1022-3 2590.00
NA
290
KM1022--3-208 2590.00
NA
290
KM102233PH 2645.00
NA
290
KM102232083PH 2645.00
NA
250
KM1018 2240.00
SK1018
1940.00
250
KM1018-208 2240.00
SK1018-208 1940.00
275
KM1018-3 2340.00
SK1018-3 2040.00
275
KM1018-3-208 2340.00
SK1018-3-208 2040.00
170
KM822
1790.00
NA
170
KM822-208 1790.00
NA
180
KM822-3
1850.00
NA
180
KM822-3-208 1850.00
NA
145
KM818
1670.00
SK818
1265.00
145
KM818-208 1670.00
SK818-208
1265.00
160
KM818-3 1730.00
SK818-3
1330.00
160
KM818-3-208 1730.00
SK818-3-208
1330.00
95
KM714 1375.00
SK714 1045.00
88
KM614-3 1280.00
SK614-3 910.00
60 SK609 35.00
130
KMGLAZETECH
1245.00
NA
Equipment - Kilns
Skutt Controllers
• Easy to use. Just enter the Cone value and
speed...it’s that easy. No more switches to turn
up.
• The Best Features. ConeFire Mode, Ramp &
Hold, Pre-Heat, Delay, Alarm, Program Storage
and so much more.
• Precision. Our low mass thermocouples are
accurate and responsive.
See “Equipment - Kiln Ventilation” for details
KM-1 Wall mounted, 50 AMP, single phase
$895.00
Production
KM-1 Wall mounted, 40 AMP, 3 phase
$945.00
KM-2 120V Controller (Wall or desk mount)
$425.00
Skutt Accessories & Replacement Parts
Lid Lifter Upgrade Kit
• Increased Power. Power to fire dense
loads to highfire temperatures without the
kiln slowing down.
• Built tough. Equipped with industrial
Mercury Relays and heavy gauge high
temperature wire to handle the added
power.
• Shown in chart with a “-PK” designation. Standard on
KM1627 and KM1231 Models. Optional upgrade on KM1227.
See chart for pricing.
Easily lift your kiln lid with just two
fingers. Available as an upgrade for
your existing Skutt 10- and 12-sided
kilns. (This feature is now standard
on newly purchased 10- and 12sided Skutt kilns.
Kiln
10” & 12” Upgrade Kit $300.00
Model 1627 Upgrade Kit $600.00
Easy View Upgrade
• Easier Viewing & Programming. This
wedge tilts the control panel up for easier
viewing and programming. Available for all
KilnMaster Kilns.
EASYVIEW
$35++-.00
KlnLink is a
cloud based
Kiln Monitoring
System which
connects your
kiln to the internet and feeds information from each firing in real time to the
KilnLink Database. This allows you to check the status of your
kiln or multiple kilns from anywhere you have access to the
internet using your computer or smart phone. You can even
set it up to send you Email or Text alerts. The peace of mind
you will gain from knowing your kiln is safely off is invaluable.
In addition to your current status, the easy to navigate screens
will also allow you to check your firing history, determine firing
costs, and check the amperage and voltage of your kiln which
is necessary to diagnose problems and anticipate maintenance. This can be expensive to hire a professional. With
KilnLink, all of that data is logged without even having to open
the control box.
Contact Skutt at www.skutt.com or call 503.774.6000 to find
out how you can get Kiln LInk for your classroom or studio.
Replacement Brick
Replacement bricks are available for all Skutt kilns.
Call for pricing
Kiln Power
Furniture
A furniture kit is used to create shelf layers inside your kiln. Although the contents
of shelf kits vary depending on the kiln
model all shelf kits will contain a selection of
shelves and 1 or more post assortment kits.
Furniture kits for kilns with 8 sides or less
will come with 18 posts, 3 each in lengths 1²
thru 6². Kits for larger kilns will come with 36
posts. All furniture kits are designed to fire to
Cone 10 temperatures. Call for pricing.
Skutt Replacement Parts
SK1515 Thermocouple for the KilnMaster line See page 55 for more replacement parts.
$14.00
Type S Thermocouple
Special Order Upgrade
Cone 10 - This thermocouple can hold up to the high demands of High Fire applications firing
after firing. Type S wire is the most
accurate thermocouple wire available.
Long Life - This thermocouple does not
degrade and will virtually last forever if
not broken. Sealed tube - Protects probe
from kiln atmosphere. Recommended Applications - High Fire
Ceramics and Applications where high precision is critical.
SKUTTTYPES$250.00
Blank Rings
A blank ring is a 4.5 extension ring that
may be added to most Skutt KilnSitter
models to increase the height and overall
capacity of the kiln. On multi-section kilns,
the ring fits between the master section
and the top section. Due to the fact that
blank rings increase the volume of the kiln
without adding more power, the maximum
Cone rating when fired with a blank ring is reduced to
cone 1. The ring can be added or removed when necessary.
BRSK7 7 sided for 714
125.00
BRSK8 8 sided for 818
140.00 818-3”145.00
BRSK10 10 sided for 1018/1027 150.001027-3” 155.00
BRSK12 12 sided for 1218/1227 180.00
45
Equipment - Kilns
L&L EASY-FIRE AUTOMATIC KILNS
The new Easy-Fire Kilns are designed to be easy to buy, easy to
use and easy to keep. The reliable DynaTrol program control features 4 pre-set Easy-Fire programs. Zone control ensures even
firing. A spring assisted lid provides full accesss for loading kiln without support bars and locks
in place for safety. The unique hard ceramic element holders prevent problems associated with
cracked bricks and falling elements. Ceramic thermocouple tubes protect thermocouples. Most
models are rated to conte 10 with plenty of power to get there. Other features include a very
complete and easy-to-use instruction and maintenance manual, heavy-duty elements, heavyduty corrosion free stand, hinge and case, 800 number technical support, training video, easy-toservice control panel and sectional construction for easy moving and set up.
The DynaTrol automatic control makes firing your
L&L easy with four easy-to-use “preset” ceramic
programs. Standard zone control makes firing easy.
Delay time allows you to easily control when the kiln
firing will end. Preheat feature allows you to easily
dry out your work before firing.
VENT-SURE SUPER SAFE KILN VENT
Dyna-Glow
Hard Ceramic
Element Holders - protect the
interior of the
likn from breadking and keep the elements
from falling out of the grooves.
Vent-Sure downdraft kiln vent features a wall or flooor mounted motor
which keeps motor away from the heat of the kiln, prevents vibration in
the kiln and keeps vent duct under vacuum instead of pressure to prevent
dangerous leaks of kiln gases. C-UL-US listed. VENTSURE
$440.00
VENTSURE2KITIncudes parts to vent 2 kilns with one vent.140.00
Bracket - For mounting motor on floor or in vertically on wall25.00
KILN FURNITURE ACCESSORY KITS
Kit for the e23S included one 21” full shelf, four 21” half shelves, six each of 1/2”, 1”, 2”, 4”, 6” & 8” square posts. (90 lbs.)
Kit for the e23T includes two 21” full shelves, four 21” half shelves, six each of 1/2”, 1”, 2”, 4”, 6” & 8” square posts. (110 lbs.)
Kit for the e28S includes six 26” half shelves, six each of 1/2”, 1”, 2”, 4”, 6” & 8” square posts. (105 lbs.)
Kit for the e28T includes eight 26” half shelves, six each of 1/2”, 1”, 2”, 4”, 6” & 8” square posts. (130 lbs.)
All Furniture/Accessory Kits include 5 pounds of cone 10 kiln wash, dark safety glasses and heat resistant gloves for unloading.
EASY-FIRE AUTOMATIC KILNS - PRICES & SPECS
Catalog
Voltage/
Number
Phase
Interior Dimen
Brick
Cubic
Diam.
Thick
Feet
High
Watts
Amps
Cone
Ship Wgt
Kiln
Shelf Kit
Shelf Kit
Rating
(Lbs.)
Price
Cat. No.
Price
LLE18S
240/1 phase
17 1/2”
18
2 1/2”
2.6
5,740
24.0
10
205
$1,750
FKE18S
$295
LLE18S-208
208/1 phase
17 1/2”
18
2 1/2”
2.6
5,000
23.9
10
205
$1,750
FKE18S
$295
LLE18T
240/1 phase
17 1/2”
27
2 1/2”
3.9
8,400
35.0
10
240
$2,325
FKE18T
$335
LLE18T3PH
240/3 phase
17 1/2”
27
2 1/2”
3.9
8,400
20.2
10
240
$2,325
FKE18T
$335
LLE18T-208
208/1 phase
17 1/2”
27
2 1/2”
3.9
8,400
40.4
10
240
$2,325
FKE18T
$335
LLE18T-2083PH
208/3 phase
17 1/2”
27
2 1/2”
3.9
8,400
23.3
10
240
$2,325
FKE18T
$335
LLE23S
240/1 phase
23 3/8”
18”
2 1/2”
4.7
9,460
39.4
10
265
$2,350
FKE23S
$335
LLE 23S-208
208/1 phase
23 3/8”
18”
2 1/2”
4.7
8,320
40.0
10
265
$2,350
FKE23S
$335
L LE23T
240/1 phase
23 3/8”
27”
2 1/2”
7.0
11,520
48.0
10
325
$2,895
FKE23T
$415
LLE23T-3PH
240/3 phase
23 3/8”
27”
2 1/2”
7.0
11,520
27.1
10
325
$2,895
FKE23T
$415
LLE 23T-208
208/1 phase
23 3/8”
27”
2 1/2”
7.0
9,980
48.0
10
325
$2,895
FKE23T
$415
L LE23T2083PH
208/3 phase
23 3/8”
27”
2 1/2”
7.0
11,000
30.5
10
325
$2,895
FKE23T
$415
L LE28S
240/1 phase
28”
18”
3”
6.8
11,500
39.4
10
370
$2,895
FKE28S
$520
LLE28S-208
208/1 phase
28”
18”
3”
6.8
9,980
40.0
10
370
$2,895
FKE28S
$520
LLE28T
240/1 phase
28”
27”
3”
10.2
11,520
48.0
8
460
$3,425
FKE28T
$635
LLE28T -3PH
240/3 phase
28”
27”
3”
10.2
16,620
40.0
10
460
$3,425
FKE28T
$635
LLE28T-208
208/1 phase
28”
27”
3”
10.2
9,980
48.0
5
460
$3,425
FKE28T
$635
LLE28T2083PH
208/3 phase
28”
27”
3”
10.2
14,340
39.8
10
460
$3,425
FKE28T
$635
All single phase kilns include a 6-50P 50 amp plug.All three phase kilns include a 15-50P three phase 50 amp plug.Skidded carton included.No extra charges
for 3 phase power,zone control,spring-assist lid,element holders or thermocouple protection tubes.e23S and e23T kilns have 2-1/2 ”brick standard.3 ”brick option
reduces the interior diameter to 22-3/8 ”.3 ”brick for e23S kiln adds $100 to price and 25 lbs to weight.3 ”brick for the e23T adds $100 to price and 30 lbs to weight.
46
Equipment - Kilns
Liberty Belle Home & Studio Test Kiln
This is the perfect starter kiln: NEW kiln is designed for the home (also makes a GREAT glaze test kiln for
professional potters). Sized at 2.5 cubic feet (16-1/2" diameter by 18" high) it features a simple three button
automatic control, 3" of energy saving brick, a 12 foot long cord that plugs into a 30 amp dryer outlet, sectional
construction for easy set up, cone 10 operation, fast heat up, ceramic element holders for durability and many
other features. 3 Year Limited Warranty.
LLLB18
Liberty Belle Test Kiln$1585.00
LLLB18-3
Liberty Belle Test Kiln - 3” Brick
$1635.00
Furniture Kit includes one 15” full shelf, four 15” half shelves and four each of 1”, 2”, 4” & 6” triangular kiln posts
plus one pound of cone 10 kiln wash. You can subsitute two half shelves for one full shelf at no charge. LLLB818FK
Furniture Kit for LL-LB18-3
Thermocouple Option
LLTHERM
Pyrocil metalic thermocouple instead of 8 gauge thermocouple
$215.00
LL-LB18-3
$ 25.00
L&L Jupiter Automatic Zone Control Kilns
Standards features on the JD kilns include automatic DynaTrol with zone control, type
K 8 gauge thermocouples with ceramic protection tubes, separate control box with
plug-in sections, stand, solid peep hole plugs, element holders to protect the fire brick
from element replacement. 3 Year Limited Warranty.
Easy-Lift Spring Hinge is standard on all 12 sided models (29" & 28" diameter).
Vent-Sure venting system is recommended for these kilns. Vent system runs on 120V,
includes a 15 foot long flexible aluminum duct. Bypass collection box mounted on kiln
allows adjustment of venting.
LL-JD230
Maximum Model Cone Firing Chamber Size LLJD18-3
10 16.5” x 18” LLJD230 10 23 3/8” x 27” LLJD236 10 23 3/8” x 36” LLJD245 10 23 3/8” x 45” LLJD2927** 10 28"x27" LLJD2936** 10 28"x36" LLJD2945** 10 28"x45" Cubic 240V 208 Shipping Feet Amps Amps Weight 2.6 23
26.5 220 7.0 44
44 305
9.4 58.6 58.6 360 11.8 73.3 73.3 410 10.2 57 60
395 13.6 76
80
480 17.0 95 100 580 LL-JD2936
Furniture Kit
Price
295.00 1845.00
415.00
2935.00
485.00
3535.00
560.00 4135.00
635.00
4295.00
755.00
5460.00
875.00
6475.00
** Without power cord & plug. Contact electrician to wire into power source.
Control Options
A Orton Kiln Sitter is available as safety backup to the automatic control.
$ 650.00
120 Volt Power Supply with electrical noise filter for the automatic control
185.00
Pyrocil Metallic Type K Thermocouples instead of 8 ga type K TCs with ceramic protection tubes
no charge
Type S Platinum Thermocouples (2 required for 18” kilns, 3 required for all other models) Price per each.
185.00
KISS Computer Software to monitor control
575.00
If you don't see the L&L kiln you want, call us at 800-723-7264. Ceramic Supply is a full line L&L dealer.
When venting L&L kilns, you must use L&L Vent-Sure vent only.
47
Equipment - Kilns
Amaco Electric Kilns: Classroom & Studio
AH10
These kilns are dependable, efficient, well known for easy operation, and time-tested for over half a
century. Exteriors are built of strong, welded steel throughout with extra-heavy, one-piece steel front panels,
and are finished in heat & rust resistant ebony & silver-gray. The high fire refractory-firing chamber is backed
with thick walls of block-type insulation to seal in heat & reduce exterior heat radiation. Elements made of long
lasting A1 Kanthal wire are standard. Kilns come complete with a Select Fire Kiln Controller. The controller will
provide firing accuracy, convenience and consistent results. You can set the Select Fire to fire by temperature
or cone number. Kilns also available with Kiln sitter/Limit Timer. All Amaco kilns are suited for firing in the
lower temperature ranges for earthenware, overglaze decoration and glass slumping. AH and HF series are
especially suited for stoneware and porcelain firings. Delivery charge will be applied. For Authorized Amaco
Kiln Service & Repair call 1 (800) 723-7264 or (973) 340-3005 in NJ.
Amaco AH & FA Front Loading Series
The AH series kilns have refractory backed, steel firing-chamber doors which fit snugly, swing out of the way for
easy stacking, and can be lifted off the hinges. Kiln bases are handy storage cabinets. The elements in the AH
& FA series are protected by high-fire refractory holders and are slotted for maximum heat radiation. Holders
slide in and out of grooves in firing chamber walls and are easily threaded with new wire or can be replaced
with element holders complete with elements. Highly recommended for professional and institutional use.
FA88
Most Amaco kilns come with a 2-year limited waranty. Ask for details.
Amaco Front Loading Kilns Price includes Select Fire Kiln Controller. All 208-240V kilns are available 3-phase.
Model Max Cone WxHxD
Firing Chamber Size AH10SF-3PH
AH10SF-208
AH25SF AH25SF-208 AH30SF-3PH FA44SF FA44SF-208 FA88SF FA88SF-208 C/10
C/10
C/8 C/8 C/10 C/01 C/01 C/01 C/01 15 x 21 x 18
15 x 21 x 15 20 x 20.5 x 29.5 20x 20.5 x 29.5 20 x 20 x 36 16 x 20.5 x 17 16 x 20.5 x 17 16 x 18 x 17 16 x 18 x 17 27.25 x 23.50 x 31.25 31.25 x 28.25 x 31.38 FA44BASE FA88BASE 240V 208 Shipping Amps Amps Weight 17.6
-
45 -
38.6 20.4 -
25 -
35.1
-
45 -
-
21
-
28.6 777 777 750 750 1495 452
452
550 550 WxHxD
Firing Chamber Size
Price
29.8 x 37.75 x 60 $7495.00
29.8 x 37.75 x 60 7495.00
38.5 x 37.75 x 66
6495.00
38.5 x 37.75 x 66 6495.00
45 x 38.5 x 66.5 13,995.00
31 x 34.13 x 36.75 4150.00
31 x 34.13 x 36.75 4150.00
35.25 x 34.13 x 36.75 4450.00
35.25 x 34.13 x 36.75 4450.00
Welded
steel finished in silver gray
Chromium
plated
hardware,
magnetic door
latch
and one shelf
AH30
575.00
575.00
Note: The mounted version kiln vent is an effective ventilation system for Amaco front loading kilns.
See Index. All Amaco front load kilns are drop shipped from the factory, FOB Indiana. Customer is
responsible for damages. Freight cost to be added to the invoice.
Amaco HF Top Loading Series
The HF series of top loading kilns combine two unique features: A ceramic fiber rope which
encircles the top of the firing chamber forming a perfect seal between the lid and the kiln and a
spring-type latch which allows the lid to adjust with the expansion and contraction of the firing
chamber refractory during firing. Spring balanced lids on all HF models (except HF66) assure
fingertip control. All models have a special vent in the lid to permit greater air circulation for better
glaze results and easy vapor exit.
HF97
Amaco Top Loading Kilns Price includes Select Fire Kiln Controller. All 208-240V kilns are available in 3-phase.
Model
HF97SF
HF101SF HF105SF EC55SF Max
WxHxD
Cone
Firing Chamber Size
8
8
8
01 18.0 x 18.0 x 18.0 18.0 x 18.0 x 27.0 30.0 x 20.0 x 24.0 18.0 x 18.0 x 18.0 240V208V
WxHxD
Amps
Amps
Shipping Dimensions
25.0 37.5 48.0 27.1 28.8 43.0 --
28.7 34.00 x 29.63 x 31.8 34.00 x 29.63 x 40.5 47.25 x 33.50 x 39.5 31.00 x 27.38 x 32.5 Shipping
Weight
452 546 767 404 Note:The suspended version kiln vent (KILNVNT)is an effective ventilation system for Amaco top loading kilns. See Index.
Inquire for replacement elements and parts.
48
Price
3995.00
4995.00
5895.00
3995.00
Equipment - Kilns
Tucker’s Cone Art Kilns
Tucker’s Cone Art Deluxe Kilns are ideal for the production pottery/sculpture studio or
classroom. The double insulation feature of this kiln saves approximately 30% of energy MX2336D
costs. Fitted with corrosion resistant stainless steel jackets and heavy-duty Kanthal A-1
elements, the Tuckers Cone Art Kilns are durable and built to last. The kiln capacity
ranges from 3.3 up to 16.5 cubic feet.
NOW with extra features at NO EXTRA CHARGE!
• Excellent Lid Lifter Design
• 3 Thermocouples on all
automatic models over 7 cu. ft.
All Cone Art Kilns come with:
Bartlett Controller or Dawson Kiln Sitter
Double Wall Construction
2 1/2” Premium Brick plus 1” Block Insulation*
Heavy Duty Kanthal A1 Elements
All Stainless Steel Jacket & Fittings
Floor Elements on Insulated Models
Sectional Design for Easy Installation
Heavy Duty Color Coded Wiring
Lots of Power
BX2818D
* single wall models also available
BX2318D
Pottery Kilns - Double Wall Construction - BX Models/Bartlett Controller
Model
Phase Voltage
Inside Dimensions
Outside Sections Cu.
Amps
Breaker Wire
KW
Shipping
Max
Dimensions Ft. WeightCone
BX119D BX1822D 11 x 19 17.5 x 22.5 17.5 x 22.5 17.5 x 13.5 17.5 x 13.5 23.5 X 18
23.5 X 18
23.5 x 27 23.5 x 27 36 x 26 x 27 36 x 26 x 27 28 x 18 28 x 18 28 x 27 28 x27 41 x 31 x 27 41 x 31 x 27 18 x 14 24.5 x 27.5
24.5 x 27.5 24.5 x 18.5
24.5 x 18.5
30.5 x 24 30.5 x 24 30.5 x 32
30.5 x 32
43.5 x 33 x 33 43.5 x 33 x 33 35 x 24 35 x 24 35 x 33
35 x 33
48 x 38 x 35 48 x 38 x 35 BX1813D BX2318D
BX2327D BX2336D BX2818D BX2827D BX4227D 1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
120 240 208 240 208 240 208 240 208 240 208 240 208 240 208 240 208 1
1
1
1
1
2
2
3
3
3
3
2
2
3
3
3
3
0.57 3.30 3.30 1.70 1.70 4.70 4.70 7.00 7.00 12.00 12.00 6.51 6.51 10.00 10.00 16.50 16.50 14.50 32.00 32.00 19.00 19.00 35.00 35.00 48.00 55.40 69.00
79.50 47.10 54.30 63.00 10.00
75.00
79.90 15A 40A 40A
30A 30A 50A 40A 60A 60A 80A 90A 60A 60A 70A 72.5A 80A 90A 14 8
8
10 10 6
6
6
6
4
4
6
6
6
4
4
4
1.70 130.00 6.70 240.00 6.70 240.00 4.00 200.00 4.40 200.00 8.40 295.00 8.40 295.00 11.50 335.00 11.50 335.00 16.50 475.00 16.50 475.00 11.50 290.00 11.50 290.00 15.50 400.00 15.50 400.00 18.00 555.00 16.50 555.00 10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
15A 40A 40A 30A 30A 60A 60A 80A 90A 60A 60A 70A 80A 80A 90A 14 8
8
10 10 6
6
4
4
6
6
6
4
4
4
1.70 6.70 6.70 4.00 4.50 11.50 11.50 16.50 16.50 11.50 11.50 15.50 15.50 18.00 16.50 10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Pottery Kilns - Double Wall Construction - MX Models/Dawson Kiln Sitter
MX119D MX1822D MX1813D MX2327D MX2336D MX2818D MX2827D MX4227D 1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
120 240 208 240 208 240 208 240 208 240 208 240 208 240 208 11 x 19 17.5 x 22.5 17.5 x 22.5 17.5 x 13.5 17.5 x 13.5 23.5 x 27 23.5 x 27 36 x 26 x 27 36 x 26 x 27 28 x 18 28 x 18 28 x 27 28 x 27 41 x 31 x 27 41 x 31 x 27 18 x 14 24.5 x 27.5
24.5 x 27.5 24.5 x 18.5 24.5 x 18.5 30.5 x 32 30.5 x 32 43.5 x 33 x 33 43.5 x 33 x 33 35 x 24 35 x 24 35 x 33
35 x 33 48 x 38 x 35 48 x 38 x 35 1
1
1
1
1
3
3
3
3
2
2
3
3
3
3
0.75 3.30 3.30 1.70 1.70 7.00 7.00 12.00 12.00 6.51 6.51 10.00
10.00 16.50 16.50 14.50 32.00 32.00 19.00 19.00 48.00 55.40 69.00 79.50 47.10 54.30 63.00 72.50 75.00 79.90 130.00 240.00 240.00 200.00 200.00 335.00 335.00 475.00 475.00 290.00 290.00 400.00 400.00 555.00 555.00 Call for pricing.
49
Equipment - Glass Kilns
L&L Glass Kilns
L&L Doll/Test Kiln
USE ANYWHERE: The Doll-Baby kilns are meant for small ceramic work such as dolls, for testing glazes without firing
a large load, and for other laboratory and home uses. They are available in either 15 amp Cone 5 version (DL11-DB),
or an 18 amp Cone 10 version (DLH11-DB). Both models include a 3--Button Bartlett Controller, 1” diameter peepholes
allowing a wider view, galvanized stand with full support, stainless steel case and stainless screws and Dyna Glow Element Holders.
L&L GS1714 Front Loading Glass Kiln
Temperature Rating: 1100°C, 2012°F. Heat up time with no load: 15 minutes to 1600°F. 30 minutes to 1900°F.
Front loading with horizontal plug door hinged on left. Quartz window is 2-1/2” (6.4cm) wide by x 1” (2.5cm)
high. Vent hole in top. All controls and components are mounted in a control panel that slides into the ventilated case assembly. An air space keeps controls cool. The control box can be easily removed for servicing.
An On/Off switch and control fuse are included. Side elements molded into the ceramic fiber insulation module.
Orton Autofire Express Program Control with five PMC (Precious Metal Clay programs, 3 ACS (Art Clay) programs and 12 Custom Programs each with 8 segments. Each program has 8 segments with a ramp, soak and
set point for each segment. Type K 14 gauge thermocouple. One year limited warranty
L&L
Max Model Voltage
Firing Chamber Size Phase Watts Amps Temp DL11DB
120
11” W x 9” H
1
1800 15
Cone 5
CORONA
120 7.75” W x 5.75” H x 8.25” D 1 1440
15 2012 F
Kiln
Price
1,085.00
815.00
Shelf
Shelf
Size
Price
9” Dia. x 7/16”
24.00
13” x 14”33.00
Skutt Glass Kilns
Skutt FireBox 8
The FireBox 8 is the perfect small kiln for Glass Fusing, Precious Metal Clay, Ceramics, Enameling, Knife Making...almost anything that you need to get hot. Beginners to Advanced Artist will love this kiln. The FireBox 8 plugs
into any standard 20 Amp household outlet and since it is compact in size you can fire it up almost anywhere.
You can always fire slower but if you need to go fast this kiln reaches Glass Fusing temperatures in less than 20
minutes. The easy to read digital pyrometer allows you to know exactly what temperature the kiln is. Unlike other
kilns of its size, the FireBox 8 has a hinged lid so you do not have to worry about where to put the hot lid when
you want to work inside the kiln. The lid opens over 90 degrees so it is out of your way when loading or working inside the kiln.
The kiln is buckled to the base of the kiln so it can’t slip off. Using the wooden handle, the lid can be opened with one ungloved
hand. The digital pyrometer allows you to precisely tell if the temperature is going up or down making holding at specific temperatures much easier. The 2000 º F rating makes it capable of firing a wide variety of materials, including Ceramics. You can load it
through the top or unbuckle the body from the floor, assemble your work, and place the kiln back over the shelf and onto the slab.
There is a handle positioned on the back of the kiln that makes it extremely easy to carry.
Skutt FireBox 14 Studio Kiln w/The GlassMaster LT
The FireBox 14 comes standard with the most versatile 3 button controller on the market. The GlassMaster LT now
has nearly all the features of the standard GlassMaster in a compact 3-button controller. GlassFire Mode Preset
programs for fusing, slumping, and tac fusing help beginners start firing the kiln right away. Ramp and Hold Mode:
Up to 8 segment programming/Room to store 5 custom programs/Add Time, Add Temp, Skip Segment
The perfect kiln for fusing glass tiles. The square chamber holds 1 full square foot of 4” x 4” tile. The FireBox 14 is
top fired so it will heat each tile uniformly. The 3 button controller has programming features for the beginner and
the advanced artist. It operates on standard household voltage. Its compact size makes it perfect for the fuser on the move. The
wood handle stays cool making it easy to sneak a peak when the kiln gets to temperature.
Skutt HotStart Pro w/Controller
The new HotStart Pro gives you the ability to program and save up to 5 custom programs. Each program can have
up to 8 segments. The best part is that you don’t have to give up a thing. The HotStart Pro is still the only kiln on the
market with the convenient and easy to use GlassFire Mode. Also the HotStart Pro is currently the only kiln of it’s size
to use high quality Solid State relays for added safety and durability. • Standard Household Voltage • Reliable Solid
State Relay • Top Fired • 15” Firing Chamber
Skutt
Model Voltage
Firing Chamber Size Phase Watts Amps FireBox8
115
8” x 8” x 4.5”D 1
1725
15 FireBox 14
115 14.5” x 14.5” x 6.5”D 1
1725
15 HotStart Pro
115
15” x 6.5”D 1
1725 15 50
Max Temp 2000 1700
1700 Kiln
Price
499.00
1,020.00
915.00 Shelf
Shelf
Size
Price
7” x 7” x 1/2”14.00
13” x 14”33.00
13” x 3/8”
28.00
Equipment - Glass Kilns
Cone Art Glass Kilns
BX117G
Cone Art G117
The Tuckers Cone Art G117 glass kiln is the perfect choice for the home studio for fusing, slumping and annealing
glass. There are Kanthal A-1 elements in the lid. The walls are 2 1/2” of premium grade firebrick. The jacket and
fittings are all corrosion resistant stainless steel. This kiln can be plugged into a normal wall outlet.
•.69 Cubic feet •120 Volts •Fires to 1700F •Kanthal A-1 elements in lid and walls. •Premium firebrick
Cone Art G2309
The Tuckers Cone Art Kiln model G2309 seems to be the perfect size for many glass artists for slumping and
fusing glass. One can produce many small items right up to relatively large pieces.
• 2.3 Cubic ft
•208 or 240 Volts
•40 Amp breaker required
•Kanthal A-1 elements in lid and walls.
•Walls are 2 .5” of premium firebrick, jacket and fittings t stainless steel
Model
G117 G2309 G2309 Phase Volts
1
1
1
120 240 208 Inside Outside Sections Cu. Amps Breaker Wire KW
Dim.Dim.
Ft.
14.5 x 6.5 23.5 x 9 23.5 x 9 19.5 x 12 28.5 x 14 28.5 x 14 1
1
1
1.00 14.50 2.30 30.00 2.30 35.00 15A 40A 40A 14 8
8
Shipping Max
Weight Cone
1.70 130.00 1700
7.20 220.00 1700
7.20 220.00 1700
BX2309G
Call for pricing.
Amaco Excel Glass Kilns
Amaco Excel GSF-670
The GSF-670 glass kiln from AMACO/EXCEL features top and side elements that will fire glass evenly
and allow for pieces to heat at a uniform rate. The 13 1/2 tall chamber allows for tall slumping and drop
mold projects. The GSF-670 is equipped with the Glass Select FireTM which provides the versatility and
precision needed for complicated firing projects. Click here for the Glass Kilns Owner’s Manual including
the features of the Glass Select FireTM. Fires to Cone 07
Other features of the GSF-670 include:
208 or 220/240 Volts AC power
Exterior Dimensions: 50 1/2W x 33D x 28H
6.72 cu. ft. firing chamber area (41 1/2W x 24 1/2D x 13 1/2H)
Steel bar secures lid while loading and unloading
Includes 8 stand
EZ-Lift spring-assisted lid hinge (optional)
GSF-670 - 240/208V Single Phase
GSF-670 - 240/208V Three Phase
$2895.00
$2995.00
Amaco Excel GSF-045
The GSF-045 is an excellent kiln for fusing glass and for smaller projects in addition to annealing torch work beads. It is equipped with a side hinged door for easy opening and loading
of pieces plus a bead door that allows you to place finished glass beads on a mandrel inside
the kiln for annealing. Both doors have wooden handles mounted away from the heat so you
can grasp the handles without the need for gloves. The GSF-045 is equipped with the Glass
Select FireTM which provides the versatility and precision needed for complicated firing projects. Click here for the Glass Kilns Owner’s Manual including the features of the Glass Select
FireTM. Fires to Cone 07
Features of the GSF-045 include:
Operates on standard household current (115 Volts AC)
Exterior Dimensions: 30”W x 22”D x 17”H
0.45 cu. ft. firing chamber area (10” x 9” x 9”)
Built-in stand
Portable
GSF045- 120V Single Phase
$1695.00
51
Equipment - Kiln Ventilation
Venting Your Electric Kiln for Your Health & Safety
Clay is a mined mineral in nature. It is contaminated with organic and other chemical matter, some of which produce
fumes during firing. Other materials being fired, such as glass, lusters & metallics or paper or metal armatures, may
generate fumes. It is important for your health to vent your kiln well so that you do not breathe any potentially harmful
fumes.
SAME QUALITY VENTING
The EnviroVent 2 is a Downdraft
Ventilation System designed to extract fumes from your electric kiln and vent them outdoors before they have a
chance to enter the room. Because it is a DownDraft Ventilation System the
EnviroVent 2 also improves the fi ring atmosphere in the kiln while it is protecting you from the odorous fumes that can be emitted from certain clay bodies
and glazes when they are fired.
VENT 2 KILNS W/ 1 MOTOR
Now you can vent 2 Kilns with one vent. The new 140 CFM Motor allows
you to vent 2 kilns up to 12 Cubic Feet each, or one kiln between 12 and 24
Cubic Feet, with one Envirovent 2 Motor.
WALL MOUNTED MEANS NO HEAT AND NO VIBRATION
The new design is wall mounted. This moves the vent motor away from under the kiln so the
motor is no longer exposed to the heat and can no longer transfer any vibration into the kiln.
SPRING LOADED PLENUM CUP RETAINS SEAL THROUGHOUT FIRING
As your kiln heats up the brick expands. When it expands the hot face of the kiln floor, the inside, expands more than the cold face or underside. This causes the slab to cup, or become
slightly concave on the bottom. The result is that the center of the kiln floor moves upward at
higher temperatures. The spring loaded cup follows the floor ensuring at tight seal throughout
the firing process.
NEGATIVE PRESSURE MEANS NO LEAKING
Since the vent is wall mounted it pulls the air through the duct work instead of pushing it. This means if you were to ever form a
leak in your duct work the fumes would not be pushed into the room.
ABILITY TO CONTROL WITH KILNMASTER OR GLASS MASTER CONTROLLER
Now with the purchase of the new Skutt EnviroLink you can control exactly when the Envirovent 2 turns on and off during a fi ring
on a GlassMaster or KilnMaster kiln.
SPECIFICATIONS: Motor: 120 volt 1.4 amps. Heat exiting blower: 160° F maximum. Static pressure: distances greater than
60 ft: Use 4 inch ducting. Blower 140 cfm. Maximum kiln capacity for use with EnviroVent 2: Maximum kiln capacity for use with
EnviroVent2: 12 cubic feet (24 cubic feet with additional plenum cup kit). 17 Pounds
ENVIRO
EnviroVent 2 $ 455.00
Duel Intake Kit for venting 2 kilns or kilns over 12 cu.ft.
140.00
8 Foot Extention Kit
32.00
FLXDUCT
4” Aluminum flexible ducting, expands to 14’. Cut as needed. 52.21
Skutt EnviroLink
52
The EnviroLink (pictured in frame under the EnviroVent) is an electrical switching device that can be controlled by
an automatic kiln to deter-mine when a vent turns on and off. The EnviroLink was developed by engineers at Skutt
to provide kiln owners with the ability to automatically control the Skutt EnviroVent and EnviroVent 2. The device
utilizes a programmable power output (OUTPUT 4) on Skutt KilnMaster and GlassMaster Controllers to turn on/off
the EnviroVent and EnviroVent 2. The kiln may be programmed to control the vent during any segment of a Ramp/
Hold Program or during preset times of a ConeFire or Glass Fire Mode program.
SK2480EnviroLink
$95.00
Equipment - Kiln Ventilation
Orton KilnVent Systems - Kiln Mounted or Suspended & Stand Mounted
Introducing three ventilation systems designed specifically for front and top loader square kilns utilizing the same methods as the
envirovent. The blowers discharge the fumes diluted with room air outdoors through flexible aluminum ducting. As a result, lid
propping & manual venting are not required. This will also speed cool-down time by 2-4 hours. Kiln maintenance will be reduced
while the life of kiln heating elements will be extended. The downdraft system draws the oxygen needed for truer colors & more
even firing throughout the kiln. Also included with Each Version - Vent plenum with durable blower unit & in-line power switch, twist
drill set; 8' of 4" diameter flexible aluminum dryer ducting; hose clamp & owner’s manual. Each vent system works with kilns from 2-14 cubic feet (firing chamber) and all are 115V, 1.1 amp household current.
The Stand Mounted Version - Installs into most kilns stands with at least 12” x 12” opening and a
9” stand height. For kilns up to 14 cubic feet. 8” tall.
VENTSTAND
Stand Vent Unit
24 X 24 X 9 Tall
25 lbs.
375.00
Vent-A-Kiln Vent Unit
Vent-A-Kiln
Close Capture Canopy Hood Systems for removal of both excess heat and toxic fumes. Compactly
designed to fit easily on top of closed or vented kilns. Peatures two-speed exhaust systems. Complete with outside venting kit and overhead counterweight pulley system. Includes 115V fan motor
with on-off switch and plug, hood, convenient overhead coutnerweight pulley system, venting kit with
10 Ft. of hose, all clamps and external mounting plate for discharge. Fits round and octagon kilns.
Shipped truck directly from stock in New York factory.
Vent-A-Kiln includes: Fan motor (115V) with low/high/off switch, plug, hood, overhead counter
weight pulley system, weight and 10' of 5" diameter aluminum venting hose and external mounting
plate for discharge. Best if results, hose should be installed so that it remains straight when fan is on.
Swing Arm Wall Mounted Bracket for Vent-A-Kiln Unit This bracket allows a single Vent-A-Kiln to
service two kilns (of the same size located against the same wall) by swinging the hood over whichever kiln is in use. It can also be used to swing the hood out of the way where the ceiling is too low
(below 8') or too high (above 12') to use the standard overhead pulley system.
SWBA (fits 1122-1544)
Model
$ 68.00
Motor/Blower
SWBB (fits 1654)
Hood - Aluminim
Diameter
Depth
Fits Round/Octagon
Outside Dimensions
$147.00
Hood Only
Ship Weight
Price
Vent-A-Kiln Units
Ship Weight
Price
VENT1122
265 C.F.M
22”
4”
Up to 18”
4 lbs.
$90.00
37 lbs.
$394.00
VENT1227
265 C.F.M
27”
5”
19”-23”
6 lbs.
102.00
39 lbs.
425.00
VENT1332
265 C.F.M
32”
6”
24”-28”
10 lbs.
125.00
42 lbs.
448.00
VENT1437
265 C.F.M
37”
7-1/4”
29”-33”
15 lbs.
153.00
44 lbs.
482.00
VENT1544
500 C.F.M
44”
7-1/4”
33”-40”
25 lbs
203.00
54 lbs.
645.00
VENT1654
500 C.F.M
54”
12”
41”-50”
50 lbs.
373.00
100 lbs.
875.00
L&L VENT-SURE SUPER SAFE KILN VENT
Vent-Sure downdraft kiln vent features a wall or flooor mounted motor which keeps motor away from the heat of the kiln, prevents vibration in the kiln and keeps vent duct under vacuum instead of pressure to prevent dangerous leaks of kiln gases. C-UL-US listed. VENTSURE
$440.00
VENTSURE2KITIncudes parts to vent 2 kilns with one vent.135.00
Bracket - For mounting motor on floor or in vertically on wall20.00
53
Equipment - Kiln Parts
Dawson Sitter &
Limit Timer
Electric Kiln Replacement Parts & Accessories
An automatic shutoff device
which will shut the kiln off
at the desired temperature.
Place a junior size cone
in the sitter. When the
kiln reaches temperature,
the cone begins to bend. This trips the
electrical switch which turns the kiln off
automatically. The sitter may be ordered with a Limit Timer included as an
additional timing safety back up to the
shutoff. The timer will turn the kiln off at
a pre-set time. It includes a clock dial
which can be set for up to 25 hours. We
highly recommend the inclusion of these
Dawson sitter and timer units. We sell
our kilns with them factory installed. For
self-installation specify voltage, phase,
make and model of kilns for which this unit
will be installed and indicate if it is for replacement or a new installation. Detailed
installation and operating instructions are
supplied with each instrument. Complete
with porcelain tube assembly. UL listed.
DAWK Shutoff
$ 80.15
DAWP Shutoff with box
93.15
LT3K
Shutoff with Timer
140.00
DAWLT3Shutoff w/Timer & Box 143.08
To hold loose
elements
securely in
place when brick has been damaged &
elements have sagged. High temperature-resistant alloy. Good also for holding
together clay figures, flowers, etc.
ELP
dozen pins with hook $4.00
ELS
dozen staples
3.99
SKPIN
dozen straight pins
3.90
Porcelain Spacer For insulation
SPACER
each
$0.76
Power Cord with Plug
The line cord with plug which
runs from the kiln to the electrical
supply in the building. Please
specify 110/120V, 208/240V, 7-sided kiln,
8-sided kiln or 10-12-sided kiln.
Power Receptacle
A flush mount outlet for kiln plug.
RECEPT20 110V, 20 amp
$ 7.50
RECEPT30 240V, 30 amp
15.50
RECEPT50 240V, 50 amp
26.50
Connecting Wire
Kiln Sitter Replacement
Parts
White 14 gauge nickel wire
CONNECTING WIR per foot Tube Assembly
The tube
assembly
includes the
porcelain tube, sensing rod and cone
supports. To order, specify kiln make
and model number.
TUBAS specify tube length
$45.00
Sensing Rod
Rod, inside the TUBAS, rests on cone.
SROD specify length
$7.50
Cone Supports
Metal bars, inserted in the tube assembly
inside the kiln, support the cone.
CSUP
$ 8.50
Gauge
To align rod and cone supports in
tube assembly (TUBAS).
GAGE
$ 5.00
Timer Motor
Replacement motor.
TIMOT 110
42.75
TIMOT 240V
44.75
54
Element Pins & Staples
$4.00
Switches 240or 208V
Switch, 3 Heat - Low-Medium-High
SWITCH3HEAT Switch
60.00
Switch, Infinite - Specify 110
SWITCHINF Switch
32.00
KNOB Infinite Switch knob
5.75
Peephole Plugs
Plugs that fit into peepholes
to keep heat in kiln during the
final stage of firing. To order, specify kiln
company. Peep Plugs, specify kiln
PEEPSK
Skutt
$ 3.85
PEEPPA
Pagagon
5.99
PEEPLL
L&L
9.00
PEEP
Solid Cone Shape 4.50
Stainless Steel Cleaner
A protective coating for the outside of the
kiln. Keeps it looking shiny & new.
SSCL
$ 6.00
Brick & Brick Parts
Kiln Bricks
Kiln bricks
are precut and/or
grooved to hold elements, peepholes,
control units, etc. To order the correct
brick specify: the make and model of the
kiln, brick type and function listed here:
Connecting Wire 9" with Connectors
WIREA Eyelet connections both ends
2.25
WIREB Eyelet connection one end, Slip-on terminal other end. 2.75
WIREC Eyelet connection one end,
1/2" strip wire other end. 2.00
Replacement Floors and Coated Lids
Connectors
Lid Support Package: Replaces lid support with more secure one piece locking
lid brace. Complete with hardware.
BRACE6 6-sided kiln
$ 17.00
BRACE7 7-sided kiln
$ 17.00
BRACE8 8-sided kiln
$ 17.00
BRACE10 10-sided kiln
40.00
BRACE12 12-sided kiln
39.00
Flag Lug
FLAG
each
.95
Eyelet for screw terminal
EYELET each
.95
Slip-On for blade type terminals
SLIPON
each
.95
Butt-On for crimping two wires together
BUTT about 1" long, insulated each 1.69
CrimpOn(Skutt) - crimp on element connector
SK0074
each
2.49
Order Lid or Floor Number Number
Of Sides Price Lids
Price
Floor
LID6/FLOOR6 6
110.00 105.00
LID7/FLOOR7 7
130.00 125.00
LID8/FLOOR8 8
140.00 135.00
LID10/FLOOR10 10 185.00 180.00
LID12/FLOOR12 12 220.00 275.00
Replacement Bands for Lid or Floor:
Stainless steel bands for lid or floor.
LBAND8 8-sided kiln
$17.00
LBAND10 10-sided kiln
19.00
LBAND12 12-sided kiln
23.00
Lid Prop
Prop lid open during venting
cycles. Won’t damage bricks or lid.
LIDP Wedge shaped firebrick
$4.50
Equipment - Kiln Parts
Pyrometers/Thermocouples
Pyrometers are
installed on a
kiln to indicate
firing chamber
temperature.
Use with any
kiln or share between several kilns.
All pyrometers come complete with a
thermocouple, 3' of fiberglass (nonasbestos) insulated extension wire
(other lengths available upon request), and a wall-mounting bracket.
1-Year Meter Guarantee.
Analog Pyrometers indicate temperature on a dial. Fine, legible
marking appear every 50° between
0° & 2500°F and between 0° &
1290°C. Accuracy to 2%. Black,
dust-tight, 4½" x 4" case.
Permanently installed pyrometer.
Designed for Skutt Kilns.
SK0016 Skutt
135.00
Replacement Thermocouple for Skutt
Pyrometer SK0016
SK0021 Skutt
$ 42.00
Replacement Thermocouple
Elements and Wire
Type K 8-Gauge Thermocouple
Elements for PYROM
TH2
5-1/2"
$32.00
TH4
4-1/2" right angle
24.11
TH12 12" straight
31.95
5-1/2" Thermocouple Element for
PYROM
Element connected to wire. Specify
2' or 3' total length including wire.
THERMO36 for PYROM
$ 33.00
THERMO72 for PYROM
46.00
Skutt Thermocouple Element
Replacement for PYSKT
SK0021
$42.00
KM Thermocouples
Skutt Type K Replacement for KM
models.
THERMO-KM SK1515
$ 14.00
Skutt Replacement for Wall-Mount
Models
THERMO-KM-WALL SK1595 $ 73.00
Skutt Type S Replacement for KM
models with protection tube and
block
SK1581
$ 250.00
L&L Thermocouples
L&L 8 Gauge Type K Thermocouple
Standard with ceramic terminal block
LL-TGE800/00
$ 32.00
L&L 8 Gauge Type K Thermocouple
Long with ceramic terminal block
LL-TGE807/00 $ 37.00
L&L 8 Gauge Type K Thermocouple
Standard thermocouple only, no
block
LL-TGE800/EL
$ 15.00
Element Wire
Replacement element wire for
thermocouple. Available in 3' & 6'
lengths.
EW
Per 3'
$ 3.60
Ceramic Protection Tube
Porcelain protection tube fits over
thermocouple to
protect against impact and reducing
atmospheres.
PRTEC
$ 36.00
Porcelain Spacer
SPACER
Porcelain Spacer $.76
Replacement Relays & Fuses
L&L 25 Amp Enclosed Power Relay
with a 240 Volt Coil - Unit is the standard Power Relay used on All Newer
Manual Kilns that Require Power
Relays
LL-G-RL25/30 $ 36.00
Kiln Stands
Metal stands for top-loading kiln.
Keeps kiln elevated to allow for air
flow. Specify if kiln has 5, 8, 10 & 12
sides.
KSTD5 5-6-7-sided kilns $ 46.00
KSTD8 8-sided kilns
48.00
KSTD10 10-sided kilns
51.00
KSTD12 12-sided kilns
55.00
For square kiln, specify size, make
and model number.
Most kiln repair parts are
available. If the part you
need is not listed, please
inquire.
Skutt 25 Amp Relay (Black Case) All
newer models or ugraded KM kilns.
SK2139 $ 26.00
Skutt 25 Amp Relay (Clear Case) All
older KM kilns (not PK)
SK1517 $ 30.00
Skutt 60 Amp Mercury Relay - All
newer PK models.
SK2083 $ 69.00
L&L 25 Amp Enclosed Power Relay with a 12 Volt Coil - Unit is the
standard Power Relay used on All
Polygonal and X2300-D & XB2300-D
Series Kiln Automatic Control Panels
LL-GRL25/12 $30.00
SERVICE & REPAIR
We have a complete
repair service for
kilns of any make or
model. A qualified repair person is available
by appointment within
our service area. Rates
available upon request.
Call for an appointment:
(973) 340-3005.
55
Equipment - Kiln Accessories
Kiln High Temp Insulating and Building Materials
Insulating Bricks
Soft, insulating firebricks. Lightweight,
easy to cut, K23 used in most hobby
electric kilns. 9" x 4-1/2" x 2-1/2"
Rated °F/Descr.iption BRICKG20 2000° rough, soft 15.36
BRICKG23 2300° rough, hard 15.36
BRICKG26 2600° rough, hardest 15.36
BRICKK23 2300° smooth, soft 12.00
10% off factory-sealed case of 25
Note: Cases are sold sealed, as is,
direct from the manufacturer. They have
received the utmost care in handling;
however, minor damage may be present
on some bricks. If you require all bricks
to be perfect, please order by the piece
or dozen so that each can be checked.
Cases cannot be returned.
Castable Refractory* 3000°F
Cast your own dampers, floors, blocks,
etc. Excellent thermal shock resistance;
strong hard and durable. 140 lbs. required to pour 1 cubic foot.
MIZZU-B
50-lb bag
$ 110.64
KASTOLITE-B 55-lb bag
93.08
Insulating Block* 1900°F
Mineral wool used as outside added
insulation on kilns. Cuts with a knife.
Retains stability up to 1900°F.
BLOK
12" X 36" X 1"each
$ 16.54
Carton of 16
238.18
Block cannot be shipped UPS
Insulating Board* 2300°F
High strength; abrasion and flame
wash resistant; use inside or outside.
BORD14 24" x 36" x 1/4" thick $ 27.95
BORD12 24" x 36" x 1/2" thick
65.15
Block cannot be shipped UPS
Insulating Loose Wool* 2400°F
Bulk fiber that will not settle down or lose
insulation value over long periods of
time. Clean, dry and easy to handle (6
lbs. per cubic foot).
LWOL
per 1 lb.
$ 8.16
per 10 lb.
81.60
Insulating Blanket* 2300°F
Alumina-silica ceramic fiber used for
making kilns (especially raku kilns) and for
adding extra insulating
to kiln tops and sides
and sealing doors and cracks. 6 lbs. per
cubic foot density. Lightweight, flexible;
cuts with shears.
Full roll is 25' long x 2' wide (50 square
ft). Blanket: 1/2" thick. Order by linear
foot.
BLNK12 per linear ft x 2 ft
$17.20
Blanket: 1” thick. Order by linear foot.
BLNK1
per linear ft x 2 ft.
$16.80
Insulating Paper* 2300°F
Use as kiln wash. Peels away without
damaging ware or shelf. Full roll is 50'
long x 2' wide (100 square feet). Paper:
1/8” thick. Order by linear foot.
PAPR
per linear ft
$10.08
50 linear ft (full roll) 263.50
Hi-Temp Bonding Material (Putty, Cements, Patch and Seal)
Ceramic Putty* 2300°F
Asbestos-free. Aluminum Oxide based
ceramic putty with a
melting point of 3200°F.
Hi-Temp stability.
Resistant to thermal shock. Use for
instant repairs to brick, mortar, burner
blocks, insulation, etc. (Equivalent of
plastic wood)
HIPUT4 4-oz tube
$ 29.70
HIPUT11 11-oz caulking tube** 43.50
**11oz. tube requires a caulking gun
Kiln Seal (moist, ready-to-use)
Brush on a thin wash to prevent
particles from dusting off on ware
during firing.
SEAL 8-oz. can
$ 8.95
Sodium Silicate (liquid)
Excellent for cementing blanket fiber
to steel drums when making kilns.
SODSILP Pint
$7.05
SODSILG Gallon
24.99
CEMENT3615 lb., approx. 1 gal.$55.00
Kiln Patch (moist)
Ready-to-use, specially prepared
kiln patch is for filling chipped walls &
floors.
PATCH pint can
$ 8.50
56
Fiberfrax LDS
Caulk has a temperature grade rating
of 1260°C (2300°F). It can be used
to patch kiln cracks and re-attach
broken brick. Large deep openings
can be repaired using insulating fiber
along with the caulk.
Drying is accomplished at a noncritical, elevated temperature, and the
resulting dried material is strong,
hard, and erosion resistant.
Sairset (moist)
Ready to use for brick.
SAIR pint can
$9.50
#36 Refractory Cement
Ready to use for brick, blanket &
board.
Fiberfrax® Moldable Crack
Sealing Insulation Caulk
WARNING! Products marked with
an asterisk (*) contain ceramic fiber
which are under investigation as
a possible carcinogen. Breathing
fiber or dust may cause lung injury
& exposure to fiber might cause
skin or eye irritation.
For more information on Equipment and Material Safety call
(973) 340-3005
FIBERFRAX
$21.75 Tube
Equipment - Kiln Accessories
Orton Pyrometric Cones
Temperature Equivalents (ºF)
Orton Regular Pyrometric Cones
Pyrometric cones are useful in determining when a firing
is complete, if the kiln provided enough heat, if there was
a termperature difference in the kiln, or if a problem occurred during the firing. Use Jr cones in your kiln sitter.
When using Witness cones, it is recommended to use 3
different cone numbers; the cone temperature you would
like the kiln to reach and one cone hotter and cooler than
the desired temperature.
Self-Supporting Cones
Specify cone number when ordering.
Large Cones
Small Cones
Heating rateºF per hour (last 200º of firing)
Cone
27
108
270
108
270
540
1087
1094
N/A
N/A
1166
021
1112
1143
N/A
N/A
1189
020
1159
1180
N/A
N/A
1231
022
019
1213
1252
1283
1249
1279
1333
018
1267
1319
1353
1314
1350
1386
017
1301
1360
1405
1357
1402
1443
Junior Cones 1-1/8” H.
Cones are used in the Dawson Kiln Sitter. Tapered shape allows flexibility to adjust the shut
off point by placing the thinner or thicker portion of the
cone under the sensing rod.
JRC
Box of 50 single-number
$8.42
016
1368
1422
1465
1416
1461
1517
015
1382
1456
1504
1450
1501
1549
014
1395
1485
1540
1485
1537
1598
013
1485
1539
1582
1539
1578
1616
012
1549
1582
1620
1576
1616
1652
011
1575
1607
1641
1603
1638
1679
Senior Witness Cones 2-1/2” H
Witness cones are used to monitor the progress of the firing and heat work in different
locations in the kiln.
Senior Cones
Use with Cone Holder.
STC
Box of 50 single-number
010
1636
1657
1679
1648
1675
1686
09
1665
1688
1706
1683
1702
1751
08
1692
1728
1753
1728
1749
1801
Shown in STP
$11.42
Self-Supporting Senior Witness Cones
Features buit-in base for support during firing. Cabinet
height and angles are built in to ensure reproducable
firings.
SELFB
Box of 25 single-number
$8.22
Cone Accessories (cones not included)
Cone Plaques
Three-hole, hi-fire plaques. Designed to hold a
series of witness cones.
STP
Standard Plaque, SR
$1.38
JRP
Junior Plaque, JR
1.25
Cone Holders, Wire
Good for C/022-6. Individual metal holders
formed from heat resistant wire for long
life and durability. Box of 5.
CHS Cone Holders, SR
$ 3.79
CHJ
Cone Holders, JR
3.29
07
1764
1789
1809
1783
1805
1846
06
1798
1828
1855
1823
1852
1873
05 ½
1839
1859
1877
1854
1873
1909
05
1870
1888
1911
1886
1915
1944
04
1915
1945
1971
1940
1958
2008
03
1960
1987
2019
1987
2014
2068
02
1972
2016
2052
2014
2048
2098
01
1999
2046
2080
2043
2079
2152
1
2028
2079
2109
2077
2109
2163
2
2034
2088
2127
2088
2124
2174
3
2039
2106
2138
2106
2134
2185
4
2086
2124
2161
2120
2158
2208
5
2118
2167
2205
2163
2201
2230
5 1/2
2133
2197
2237
2194
2233
N/A
6
2165
2232
2269
2228
2266
2291
7
2194
2262
2295
2259
2291
2307
8
2212
2280
2320
2277
2316
2372
9
2235
2300
2336
2295
2332
2403
10
2284
2345
2381
2340
2377
2426
11
2322
2361
2399
2359
2394
2437
12
2345
2383
2419
2379
2415
2471
13
2389
2428
2458
2410
2455
N/A
14
2464
2489
2523
2530
2491
N/A
+Firing Precaution:
Avoid the inhalation of fumes produced by kiln firings. Firings require proper ventilation, a supply of constant fresh
air and the removal of contaminated air. Breathing fumes can be harmful to your health. For further information, see
Heath and Safety Information in Index.
57
Kiln Furniture
Cordierite Shelves
Cordierite shelves are used in low and high temperature firings
(above C/5) and in oxidation & reduction atmospheres. For higher
temperature and reduction, we suggest using 7/8” to 1" thick shelves.
Be sure not to overload and to stack posts one above the other.
Use a baffle to protect shelves from the direct flame. After normal
use and aging, Cordierite shelves do not have the tendency to crack
during firing as do silicon carbide shelves. When used correctly, Cordierite
shelves serve long and well.
Core Lite Kiln Shelves
•
•
•
•
•
Shelves:
Square/Rectangular
Revolutionary Design - Hollow Core Construction
Features:
Rated to Cone 10
Energy Efficient
Superior Heat Circulation & Sag Resistance
Amazingly strong yet lightweight. 24% lighter than same
size traditional shelves.
I-Beam hollow core construction prevents warping.
Advantages:
Lighter
Order No.
Cordierite Mullite Silicon Carbide Each
Less back strain & fatigue
SQ7 7”x7”x1/222.08
Lower firing cost
Lower shipping cost
SQ11 11”x 11”x 1/2”
24.42
Flatter
SQ12 12”x 12”x 1/2”
29.40
Each shelf is ground top and bottom for perfect REC13/10 10 1/2”x 13 1/2”
129.00
flatness.
SQ16 16”x 16”x 5/8”
45.95
Ware keeps its shape while firing, especially tile.
SQ18 18”x 18”x 5/8”
63.00
Stronger
REC18H9”x18”x5/8”
18.23
Less warpage.
REC19H 9 1/2”x 19”
135.00
Less likely to propagate cracks through cores.
SQ20 20”x 20”x 5/8”
71.79
More firing cycles.
SQ20/1 20”x 20”x 1”
87.66
Round CoreLite Shelves
REC20H10”x20”x5/8”
40.08
REC20H/110”x20”x1”
45.89
Code
Shelf Size*
Price Ea.
SQ21 21”x 21”x 5/8”
81.10
RD15-CL
Full - 15” x 5/8”
$37.30
REC22H11”x22”x5/8”
45.73
RD15H-CL Half - 15” x 5/8”
22.57
REC26H/1 13”x 26”x 1”
79.80
Shelves:
Round and Cut Sides
RD21-CL
Full - 21” x 5/8”
59.60
RD21H-CL
Half - 21” x 5/8”
39.44
RD26-CL
Full - 26” x 5/8”
102.60
RD26H-CL
Half - 26” x 5/8”
53.90
Order No.
Cordierite Shelves Each
RD13H 13”x 6-1/2”Half Round Square & Rectangular CoreLite Shelves
16.85
Code
Shelf Size*
Price Ea.
OC16 15”x 16”Octagon for 17-1/2”dia.Kiln 31.78
REC20H-CL Rectangle - 20” x 10” x 3/4”
$26.97
OC16H 15”x 8”Half Octagon for 17-1/2”dia.Kiln REC22-CL
Rectangle - 22” x 11” x 1”
36.60
15.74
DE20
19”x20”x3/4” Dec. for 22-3/4” Kiln
REC24H-CL Rectangle - 24” x 12” x 1”
35.00
48.84DE20H
20”x9.5”x5/8” Half Dec. for 22-3/4” Kiln
*Other shelf sizes are available upon request.
31.39
DE21 21”x 21”x 5/8”Dec.for 23”-3/8”dia.Kiln Posts: For use in Electric Kilns
55.47
High Alumina Shelves - Cone11
Pressed High Alumina kiln shelves are ideal for fast and high firings. Comparable to silicon carbide in strength but at a fraction of the cost. Pressed
production of these shelves creates an extremely dense and strong shelf
that resists warping. Offers extra protection against shock due to rapid
firing and cooling. Great to use in gas kilns. Not recommended for salt
or wood firing. Also high alumina and cordierite shelves are not recommended for Raku firing due to extreme and uneven temperature.
AKSRD26H
AKSRD21
AKSRD21H
AKSRD15
AKSRD15H
AKSREC24
AKSREC26
AKSREC28
58
26-1/2” x 3/4” half round
21” x 3/4” full round
21” x 3/4” half round
15-1/2” x 5/8” full round
15-1/2” x 5/8” half round
24” x 12” x 1” rectangular
26” x 13” x 3/4” rectangular
28” x 14” x 1” rectangular
41.00
52.00
30.00
27.00
16.00
56.00
49.00
75.00
POSTM - Medium (Square 1-1/4” Diameter)
POSTL - Large (Triangular - 2” Diameter)
Hgt.
POSTM
POSTL
Hgt.
POSTM POSTL
1/2”
$0.65
$1.25
7”
2.50
3.86
1”0.75 1.508”2.95
4.50
2”1.00 1.759”3.25
5.20
3”
1.25
2.15
10”
3.50
6.16
4”
1.50
3.16
11”
3.95
7.40
5”
1.75
3.10
12”
4.50
8.58
6”
2.25
3.40
Shelves Are Not Guaranteed:
Due to the fragile nature and the variety of usage and handling they may
receive, kiln shelves are not guaranteed and cannot be returned. Therefore, inspect all shelves picked up at our store or delivered by our truck
before you accept them.
NOTE: Since shelves are not guaranteed, we will ship your order by UPS or
Commercial Carrier only if you wish to assume the full risk of their shipment.
In addition, special packaging is required for these commercial shipments;
add $4.50 for the first shelf, $2.00 each additional shelf.
Kiln Furniture
Electric Kiln Furniture Kits
For your convenience we suggest the following furniture kits.
Kits include POSTM medium rectangular posts.
For High Fire 29” dodectagonal - 12 sided kiln
Same as FK27 substituting DO26H/1 shelves.
(Fits Skutt 1227PK, Cone Art 2827DX)
FK27H
$495.00
For 14-3/8” diameter septagonal - 7-sided kiln
Shelves: 5 half - RD13H
Posts: 6 each - 1", 2", 3", 4", 5", 6"
Kiln Wash: 1 lb.
(Fits: AIM 1413/1; Skutt 714; L & L J14; Paragon 66-3 Series)
FK14
$ 89.00
For Paragon’s Dragon front loading kiln
Shelves: 2-SQ20/1 & 2-REC20H/1
Posts: Large 2” diameter posts - 8ea. 4”, 6”, 8”
Kiln Wash: 1 lb. Stilts: Not included
FKD1
For 17-1/2" diameter octagonal - 8-sided kiln - up to 22"
high
Shelves: 2 full - OC16; 1 half - OC16H
Posts: 6 each - 1", 2", 3", 4", 5", 6", 8"
Kiln Wash: 1 lb.
(Fits: Skutt 818, 818+BR; L & L J18; Paragon 82 Series.)
FK17A
$ 145.00
Oval Kiln Furniture Kits
For 16-1/2" diameter octagonal - 8-sided kiln - up to 22"
high
Shelves: 3 full - OC15
(Fits: Paragon 82-3 Series, Skutt 818P)
FK16A Same as FK17A sub.OC15 shelves
$ 155.00
For 17-1/2" diameter octagonal - 8-sided kiln - 22" - 27"
high
Shelves: 3 full - OC16; 1 half - OC16H
Posts: 6 each - 1", 2", 3", 4", 5", 6", 8"
Kiln Wash: 1 lb.
(Fits: Skutt 818+WR)
FK17B
$ 160.00
For 16-1/2" diameter octagonal - 8-sided kiln - up to 27"
high
Shelves: 4 full - OC15
(Fits: Skutt 818-3, 818-3WR)
FK16B Same as FK17B sub. OC15 shelves
$ 165.00
For 23-3/8” diameter dectagonal - 10-sided kiln - up to 22"
high
Shelves: 5 half - DE21H
Posts: 6 each - 1", 2", 3", 4", 5", 6", 8"
Kiln Wash: 1 lb.
(Fits: Skutt 1018, 1018+BR; L & L J230)
FK23A
$245.00
For 22-3/4” diameter dectagonal - 10-sided kiln - up to 22"
high
(Fits Skutt 1018-3, 1018-3+BR; Paragon TNF23-3)
$240.00
FK22A Same as FK23A sub. DE20H shelves
For 23-3/8” diameter dectagonal - 10-sided kiln - 22" to 32"
high
Shelves: 6 half - DE21H
Posts: 6 each - 1", 2", 3", 4", 5", 6", 7", 8", 10"
Kiln Wash: 5 lbs. Stilts: Bell Stilt Kit BSK-2
(Fits Skutt 1027, 1027+BR; Paragon 24 Series; L & L J236)
FK23B
$295.00
For 22-1/2” and 22-3/4” diameter dectagonal - 10-sided kiln - up to
32" high
(Fits Skutt 1027-3, 1027-3+BR, Paragon 24-3 Series)
FK22B Same as FK23B substituting DE20H
$285.00
For 29" diameter dodectagonal - 12-sided kiln - Under 20"
Shelves: 7 half - DO26H
Posts: 6 each - 1", 2", 3", 4", 5", 6", 7", 8", 10"
Kiln Wash: 5 lbs. Stilts: Bell Stilt Kit BSK-2
(Fits all major brands - 28” diameter, 18” height)
FK1218
$365.00
For 29" diameter dodectagonal - 12-sided kiln - 20" to 32" H
Shelves: 8 half - DO26H
Posts: 6 each - 1", 2", 3", 4", 5", 6", 7", 8", 10"
Kiln Wash: 5 lbs. Stilts: Bell Stilt Kit BSK-2
(Fits Skutt 1227, 1227+BR; L & L J2927, J2936, J2945; Paragon 27-3 and 28-3 Series)
FK27
$425.00
$169.30
For Oval Kilns
(42” x 32” x 27”), and (42” x 31” x 36”)
Each level requires a set of two 26" half dodecagons placed
on either end of a 26" x 13" rectangle.
Shelves: 6 DO26H/1 and 3 REC26H/1
Posts: 10 each POSTL: 1", 2". 3", 4", 5", 6", 7", 8", 10"
Kiln Wash: 5 lbs.
FKOV3
$700.00
Shelf Protection and Washes
Kiln Wash
Coat the top of all shelves and the floor of the kiln, 3/8” away from
the walls, with kiln wash in order to protect them against the fusing
of accidental glaze drippings or other melt-outs. Do not paint the
walls or lid of the kiln. Mix with water to the consistency of light
cream and paint one or more coats, about 1/16" thick, to cover
the shelf completely. Our kiln wash is designed for low, medium,
and high temperature atmospheres in electric, gas reduction kilns,
and wood/soda/salt kiln firings.
KWASH
1 lb. $2.05
4 lb.
5.10
5 lb.
6.30
25 lb. 33.34
Alumina Hydrate Use dry and reuse
Special kiln shelf protection for C/6 porcelain firing. Prevents
warping of porcelain by allowing it to move freely as it shrinks.
ALHY
1 lb. $2.505 lb. 15.00 25 lb. 63.54
Porcelain Prop+ (Loose Wool+) Non-asbestos
Ceramic Fibers that resemble cotton. A support for porcelain
where propping is needed to prevent sagging and warping.
Can be placed on top of regular props instead of kiln wash.
Leaves no film or residue and brushes off easily. Re-usable.
LWOL
1 lb.
$8.16
Hi-Temp 1/8” thick Paper Support+ (2300F) Non-Asbestos
Full roll is 50' long x 2' wide (100 square feet). Order by linear
foot.
PAPR
per linear foot
$ 10.08
50 linear feet (full roll) $263.50
(+ WARNING: This product contains ceramic fiber which is under
investigation as a possible carcinogen. Handle with care. Breathing fiber or dust may cause lung injury and exposure to fiber might
cause skin or eye irritation.)
Kiln Shelf Paper
Sheets of kiln shelf paper. Used as a fusing surface, eliminates
the need for shelf wash under glass.
THICKPAPER
THINFIRE
Thick Shelf Paper - 10”x10” $10.00
Thin Shelp Paper - 20”x20”8.00
59
Stilts
Bama Stilts – Low Fire Only C/04
Eliminator Stilts – Heavy gauge steel pins, set close enough to stilt anything. Pins are cut
on an angle so they leave little or no stilt marks. Please note pins are sharp.
Each
JS1
Half Round Eleiminator
104 pins
$12.00
6”L x 3”W x ⅝”T
JS2
Inner Ring Eliminator
4⅝”W x ⅝”T
96 pins
14.00
JS3
Outer Ring Eliminator
6”W x ⅝”T
112 pins
15.52
JS4
Square Eliminator
3½”L x 4¾”W x ⅝”T
96
12.50
JS5
Octagon Eliminator
6”L x 5¼”W x ¾”T
96
16.50
JS6
Half Octagon Eliminator
6”L x 2¾”W x ⅝”T
42
9.00
JS7
Tri-section Eliminator
(3-JS7, 10-JS2, 12-JS3)
200
17.00
SET1
23” Dia. Full Shelf Set
20 pcs. – ship wt = 5 lbs.
(2-JS1, 8-JS2, 10-JS3)
BAMA3
Series #2
1" between outer pins
Pins
each
B2-3
3
$1.49
B2-6
6
1.86
10 pcs. – ship wt = 12 lbs.
(1-JS1, 4-JS2, 5-JS3)
120.00
SET10
BAMA10 17” Dia. Expanded Inner Ring Set
193.00
13 pcs. – ship wt = 11 lbs
(3-JS7, 10-JS2)
BAMA11 26” Dia. Expanded Full Shelf
SET11
367.00
25 pcs. – ship wt = 16 lbs.
(3-JS7, 10-JS2, 12-JS3)
B8-3
B8-12
Series #8 2¾” between outer pins
Pins
each
B8-3
3
$ 1.953
B8-12
12
3.34
Series #12 4½” between outer pins
Pins
each
B12-6
6
$ 3.38
B12-12 12
3.77
Series #10 3½” between outer pins
Pins
each
B10-3
3
$ 2.24
B10-12 12
3.50
Series #14 5½” between outer pins
Pins
each
B14-6
6
3.87
B14-12 12
4.95
60
B2-3
B2-6
270.00
SET3
14” Dia. Inner Ring Set
Bell Stilts are made from the highest quality
materials available on the market today. Only
Grade-A nichrome wire and rods are used. They
are pressed for uniformity and consistency and
are fired to 2400° F. These stilts are made under
strict guidelines to ensure that they are the finest manufactured. The maximum temperature
for these stilts is 2400° F, but please take into
consideration the weight, size and placement of
your piece before firing.
Series #1
1-34
¾” between outer pins
Pins
each
B1-34
3
1.14
Eliminator Stilt Sets – Complete sets designed to fit (26”, 23”, 17” & 14” Shelves – highly
versatile allowing you to mix and match to build complete shelf coverage or sections)
BAMA1
Bell Stilts
Series #3
1½” between outer pins
Pins
each
B3-3
3
$ 1.82
B3-6
6
2.00
B3-9-1
9
1.65
Series #4
2" between outer pins
Pins
each
B4-3
3
$ 1.71
B4-9
9
2.18
Series #6 2¼” between outer pins
Pins
each
B6-3
3
$1.82
B6-12
12
4.01
Stilts with rod: 2¼” rod
B6-9-1
9
5.45
5” rod
B6-1
5
2.51
Series #16 7½” between outer pins
Pins
each
B16-15 15
7.200
Large Bead Bar
2 – 9½”T posts with 3 – 12” Rods
BLBBK1
25.00
Circle Stilts
each
BCS5 4” Dia., ¾”T, 8 pts
$2.20
BCS6 6” Dia., ¾”T, 8 pts
4.00
BCS7 2” Dia., 1¼”T, 8 pts
1.90
Large Doll Round
6” Dia., with 6 – 6” Rods
BLDRL6A
Lid Stilts
BLSD1 1”W, 1¼”T
BLSD2 1-1/2”W, 1¼”T
BLSD3 2”W, 1¼”T
BLSD4 3”W, 1¼”T
1.00
1.30
1.46
1.65
Large Bar Stilt
9”L, 1-1/2”W, 5/8”T, 80 pins
BLBSB11
12.00
3-Points
BLSE1 1¾”W. 2”T
BLSE2 2¼”W, 2”T
BLSE3 2½”W, 2”T
BLSE4 3½”W, 2”T
1.30
1.41
1.50
1.70
Specialty Stilts
BSSM1 1” Wide with 1 – 4” Rod
BSSM2 2” Wide with 3 – 4” Rod
BSSM5 6”L, 1-1/4”W, 4 – 4” Rods
BSSM6 4½" stem – 1 pin
BSSM7 6½" stem – 1 pin
BSSM8 9" stem – 1 pin
14.00
2.80
4.00
6.25
4.00
4.50
5.00
Stilt Mark Stone
Gently rub any
marks left by stilts after firing. It will also
remove other rough spots on glaze fired
ware.
SMS 3½" Carborundum stone $ 3.99
Stilts
Star Stilts
“D” Series
Metal points supported in porcelain limit unsightly stilt marks
on your ware.
Star Shaped Stilts
Specify number of points
when ordering.
Height: 3/8”
4 PT
9-4
10-4
11-4
12-4
13-4
14-4
15-4
16-4
Size
¼”
¾”
1"
1½”
2"
2½”
3"
3½”
Each
$ .84
.94
1.20
1.10
1.33
1.42
1.54
1.78
All Metal Speedy Spurs 2150°F
High temperature all metal stilts. Reusable; up to 100
firings reported
to 2150°F.
One size, ½”.
Scatter liberally on kiln shelf; they are
always right side up. Ware can be easily
placed without careful adjustments.
SPUR
Each
$ 1.75
All bars are used for heavy ware.
Code
Pt. - Pt. Each
D2B
2”
$1.17
D3B
3¼”
1.76
D4B
4”
1.89
D4B20
4”
2.44
D5B
3½”
2.07
“E” Series
Suitable for vases, bottles, salt &
pepper shakers, figurines, etc.
Code Rod Ht. Base Width Each
E2S 1½”
1¾”
$ 1.96
E6S 2½”
3”
3.46
E10S 6”
4”
4.45
Specialty Stilts
No stilt marks are left behind. All specialty stilts come with interchangeable
rods.
Ladle Stilt
By supporting the bowl with 2 pins and
the handle with 2 pins, this stilt’s unique
design makes it easily adaptable for various shaped ladles and spoons.
LADLS
ea.
$ 5.18
doz.
55.94
“F” Series
“A” Series
For support of ceramic ware.
Code
A14
A12
A34
A1
A114
A112
A214
A234
A312
Pt. - Pt.
¼”
½”
¾”
1”
1¼
1½”
2¼"
2¾”
3½”
Each
$ .73
.75
.76
.92
1.02
1.31
1.40
1.58
1.84
“B” Series
Designed for box lids, deep footed ware & ware with overhang.
Code Pt. - Pt. Height
Each
F3H 11/8”
1½”
$1.26
F6H 13/8”
1¾”
1.42
F9H
2”
2”
1.68
1
3”
2.25
F10H 2 /8”
Specialty Stilts
No stilt marks are left behind. All
specialty stilts come with
interchangeable rods.
“G” Series
Utility Egg Holder
Great for bell, animal heads, etc.
Code
G1P
G2P
G3P
Height
¾”
1½”
2”
16 holes and 13 rods.
Holds 16 egg noggins & 10 eggs.
B14UEH ea.
$37.50
B16UEH ea.
30.00
Stilt Icicle Holder
ICESTILT ea.
$25.11
Each
$ .78
.81
1.68
For support of heavier ceramic
pieces.
Code
B612
B1015
Pt. - Pt.
2¼”
3½”
Each
$1.93
2.27
“C” Series
Suitable for small Christmas
trees etc.
Code
C126
C1215
Pt. - Pt.
4¼”
4¼”
Each
$3.54
4.40
Suitable for medium Cristmas trees etc.
Code
Pt. - Pt. Each
C149
5¼”
$4.90
C1415
5¼”
4.98
Suitable for large Cristmas trees etc.
Code
Pt. - Pt. Each
C1618
6¼”
$7.53
“H” Series
These stilts contain (3) removable rods
of heavy gauge nichrome wire. Ideal for
vases, eggs, doll parts, etc.
Code Pt. - Pt. Rod Ht.
Each
H8ROD
2¾” 4”
$ 5.43
H10ROD 3½”
6”
7.42
SPTH
Specifically for Decal firing and
Gold or Silver firing.
Code
SPTH
Napkin Ring/Bracelet Holder
This stilt can be used for bracelets and
other hanging objects. Separately, the
base becomes a Peep Hole Plug and the
top becomes a stilt with 18 pins.
NRS
$11.87
Carousel Horse Stilts - Fire to C/10
$2.75
ORNHOL
Holds up to (7) porcelain rods (3/8” diam.)
36”, 44” and 7 Nichrome wire hooks that
fit into the top of the rods for hanging
objects.
Code
ORNHOL
$21.58
For medium-sized horses. Center rod of
9-gauge nichrome wire is 4” long with 7
smaller pins to support the underside of
the horse. Steady and secure. Can fire
to C/10.
CH1
$8.00
For large-sized horse. Stilt has 6 small
pins to support the underside of the
horse. Steady and secure. Can fire to
C/10. Easy to use.
CH2
8.50
61
Firing Accessories
Plate / Tile Racks
Plate Stackers
Fires to 2300°F. Solid,
sturdy, one-piece plate
racks.
Holds: Plates up to 9¼” dia. x 1¼” high.
each set of 6
PLRA8
19.12 ea
103.25 set/6
Holds: Plates up to 12¾” dia. x 2" high.
PLRA12 22.16 ea.
119.66 set/6
Plate Setter
Set of 3 posts will fire 1
plate. Can stack
to 6 levels high to fire
from 1 to 6 plates.
(Picture shows 3 sets of
PS3.)
PS3
Set - 3 posts per level
$ 7.98
Large Bead Tree
High Temperature Wire/Jewelry Wire
High fire wire can be incorporated into
your work and fired. For example, you
could imbed a wire loop in a bead. Wire
can also be used to string and support
work during firing. Be sure to test first
for your needs.
This bead tree uses shorter
lengths of wire to eliminate
the sagging that occurs in
longer wires, thus preventing your small objects from
touching and sticking together. All wires are removable to be used for
various sixes of beads and hanging objects.
BTREEL
$29.95 ea.
A versatile, space-saving
device for firing beads
and other large hanging
objects. Two durable
stoneware supports with
six 10"-long heavy-gauge
rods that can be staggered to accommodate
any size object. Allow a 6" - 7" span between supports; the excess wire beyond the
support can be utilized. This eliminates the
possibility of sagging and allows use of all
possible space on the wires.
BRACK
$36.00 ea.
Bead Setter
Holds: 13 6" x 6" tiles or
TILRD
13 6" x 8" tiles.
TILRC 6¼”L x 7½”W x 12½”H
$30.93
Holds: 22 4¼”-square tiles
TILRD 5"L x 11¼”W x 10¾”H
$41.43
Tile Stacker
Sturdy, one-piece, 7groove post stacker. May
be placed as needed
depending on size and
shape of tiles. 3 or 4
posts required for stacking. Will hold
8 tiles if one is placed on top. (Picture
shows 2 pairs of BTS.)
BTS
7" high – holds 7 tiles 17.39/pr.
Tile Stackers
Heavier, sturdier, securely
interlocking, individual stackers expand to any size. Use
4 per tile.
TILE2
$1.92ea.
62
High Temp Wire & Rods
Large Bead Rack
One-Piece Tile Stacker
Fires to 2300°F. Solid,
sturdy, one-piece tile
racks.
Individual Stackers
For tiles up to 8". 8½” x 99⁄16” x 1"H
TILE8
Bead Holders
Setter is 4" long, 1¾" high, with
six 6" rods.
RFB
$ 16.01
Bead Setter ea.
ROD6
Replacement rod, ea.
Clay Stilts
All Clay Stilts - Larger
Double Pointed Stilts
Inexpensive, sturdy, all clay
stilts. Can be fired to C/10.
Point to Point Dimension
New
Each
DPS1
1½"
$1.13
DPS3
2"
2.00
DPS5
2½"
1.42
DPS7
3"
1.64
DPS9
3½"
2.33
Rated to C/6. Test for higher temperatures.
BJW20 20 gauge
10’
$5.31
BJW24 24 gauge
10’
5.31
BJW30 30 gauge
20’
4.65
Rated to C/05. Test for your needs.
HTS
24 stamen
10'
3.39
HTW
17 gauge
10'
5.89
Rated to 2055°F. 50/package
BHOOK Nichrome ornament hook
7.25
Stilt Rods - Larger
High fire replacement rods are available
for all of your Bell Stilts.
Lgth
each
10 Gauge
BSR10-3
3"
$ 2.50
BSR10-4
4"
2.50
BSR10-5
5"
3.50
BSR10-6
6"
4.00
BSR10-8
8"
5.00
BSR10-10
10"
5.50
BSR10-12
12"
6.00
Replacement Rods
Replacement for BTREE and RFB
ROD6 6" long, .08" thick
$ 2.65
All Metal Pins - Larger
Made of high temperature resistant alloys,
nichrome and kanthal. Good for stilitng
or holding together clay figures, flowers,
etc. & to hold loose elements securely in
place when brick has been damaged and
elements have sagged.
Kanthal Wire / Element Pins
SKPIN Dozen straight pins
144 pc School Assortment - Double
Pointed Stilts. 3 dozen each DPS1 (11/8")
& DPS3 2"); 2 dozen each DPS5 (21/2"),
DPS7 (3") & DPS9 ( 37/8").
DPS144
$64.20
Stilt Pins (100/bag) Make your own stilts.
Gauge
Bag Price
BSP64 .064
$ 8.04
Nichrome Element Hooks and Staples
ELP
Doz. pins w/hook
$4.00
ELS
Doz. staples
3.99
Raku Tongs
$ 17.45 ea.
RK37
RK45
RTONG31
RTONG40
37 Jaws; 39” length
45 Jaws; 31” length
31 1/2” Long
40 1/4” Long
$45.99
45.99
27.00
29.68
$4.00
RTONG31
RTONG40
Equipment - Pottery Wheels
Potters Wheels - built tough for schools
Skutt Kilns, one of the most trusted names in school equipment, has joined forces with Thomas Stuart Potters
Wheels to form Skutt Potters Wheels. For over 30 years Thomas Stuart Wheels have been one of the best
kept secrets of potters and local school districts. Their durability, usability and precision are unmatched in the
industry due to their unique continuous duty motors and removable wheel head design. Reversing switch so
you can change wheel head direction.
• Power. Large high-torque motors center more clay, run cooler, quieter and last longer.
• Design. Removable wheel heads (allows for one-piece slash pans) and powder-coating make cleanup easy.
• Durable. Heavy-duty cast aluminum bases are virtually indestructible.
Choose your Model
The model you choose wil be determined by whether you want a built-in or removable splash pan and what horsepower motor you want. Both
splash pan designs have their benefits. Some teachers prefer a minimum number of detachable parts, others appreciate the convenience of a
removable splash pan for cleaning
Prodigy
A perfect wheel for the
beginning clay artist.
Welded steel frame.
Round, one-piece
splash pan. Standard
SCR controller with
individual adjustment
for exacting control.
12” twist and lift cast
aluminum wheel head
with 10” bat pins.
(Removable Splash Pan)
Reversing switch
not availabe on this model. Five-year warranty.
(Built-In Splash Pan)
Kickwheel
Aluminum Splash Pan
Cup Head System
(Electric Wheels)
Name
Splash
Pan
Wheel
Head
Max
Clay
HP
Wt.
(lbs.
Item
#
TSPRODIGY
Prodigy
Removable
12”
50
1/3
94
Legend
Removable
14”
100
1/3
117/127
Revolution
Removable
14”
150
1/2
119/128
Premier
Removable
14”
400
1
128/140
Classic
Built-In
14”
100
1/3
117/127
Elite
Built-In
14”
150
1/2
119/128
Professional
Built-In
14”
400
1
Steven Hill
Built-In
14”
150
1/2
Kickwheel
Optional
14”
Opion
248
# w/SSX
Upgrade
$875.00
N/A
$1375.00
TSREV
$1325.00
TSREV-SSX
$1480.00
TSPREM
$1495.00
TSPREM-SSX
$1650.00
TSCLASS
$1220.00
TSCLASS-SSX
$1375.00
TSELITE
$1325.00
TSELITE-SSX
$1480.00
140
TSPRO
$1495.00
TSPRO-SSX
$1650.00
144
TSHILL
$1595.00
TSKICK
$770.00
included
----
N/A
----
Item #
Price
Leg Extensions (For Electric Wheels)
TSLEGEXT
$ 160.00
TSSHAFT
$ 68.00
Electric Wheel Cup Head System- 12” Ring Mold
TSCUP12
$120.00
Electric Wheel Cup Head System- 12” & 14” Ring
Molds
TSCUP
$165.00
TSMOTOR
$355.00
TSPAN
$90.00
TSBATSYS
$84.00
Aluminum Splash Pan (Kickwheel)
Kickwheel Bat Mold System
SSX Drive Upgrade
This drive allows incredible sensitivity from
the foot pedal at very low speeds. Perfect
for banding and decorating right on the
wheel. $250.00
----
TSLEG-SSX
Shaft Extensions (For Electric Wheels
Kickwheel Motor Attachment - 1/3 HP
Price
w/SSX
$1220.00
Accesories
TSLEG
Price
Adjustable Leg Extensions
Easilty convert any of the
wheels (except Prodigy)
into a stand-up wheel. Cast
aluminum clamp attaches to
the 2” pipe leg. Adjusts to a
maximum 30” height.
Shaft Extension
Raises the wheel head above
the base for throwing or trimming
oversized pots. Simply lift the
wheel head off, place the shaft
extension on the shaft and replace the wheel
head. (for built-in splash pan models only).
63
Equipment - Pottery Wheels
Electronic & Ring Cone Drive Wheels
Brent – Electronic Speed Controlled Wheels
BRENTEX
Brent offers you a choice of Electronic Speed Control Wheels. These wheels are simple in design and
have high quality components with permanent magnet motors and all steel construction. By varying the
speed of the motor electronically, mechanical speed changing systems are eliminated and the foot pedal
can be moved about to suit the individual. Speed ranges from 0 to 240 rpm with exceptional power.
Wheels are equipped with automatic belt tensioning devices and have belt guards designed to meet
OSHA specifications. The A, B, C, & CXC come with a modular control connector on the foot pedal
and motor to allow for easy repair or replacement and to reverse wheel direction. All wheels are
guaranteed for 5 years. All wheels are 110V, 60 cycle. For overseas, 220V, 50 cycle wheels are available. NOTE: Replacement FUSE: for A & B wheel is 10 Amps; for the C & CXC wheel is 15 Amps.
Brent Model EX
The Brent EX is Brents most powerful wheel yet. It features most of the features of the CXC
plus heavy duty 1 ½ horse power, 15 amp motor . Centers over 100 lbs. of clay . Includes
8 groove ply v-drive belt, 14” wheel head and splash pan included.
BRENTEX
Ship wt 119 lbs
$1,695.00
BSPAN
Replacement splash pan
$ 49.95
BRENTC
BRENTCXC
Brent Model CXC
The top-of-the-line heavy-duty CXC is for the potter who requires strong, consistent performance. Its heavy, 5/16” steel table, 14” head, 110V, 1 hp motor, and 8 groove poly-v
belt drive give the best combination of power & efficiency. This wheel can center up to
100 pounds of clay. It comes standard with both reversing motor and silencer. Splash pan
included. For 220V, add $50.00.
BRENTCXC
Ship wt 117 lbs.
$1,595.00
BSPAN
Replacement splash pan
$ 49.95
Brent Model C
The standard no one can match. The Model C centers 75 pounds with a 110V, 60 cycle,
3/4 hp motor. It has a reputation for mechanical efficiency, long life, & quiet, vibration-free
dependability. The 14” cast & machined aluminum head runs on permanently sealed double
row ball bearings. Splash pan included. For 220V, add $50.00.
BRENTC
Ship wt 117 lbs.
$1495.00
BSPAN
Replacement splash pan
$ 49.95
BRENTB
Brent Model B with Splash Pan
Designed to fill the needs of schools and studio potters. Competitively priced, this wheel is
quiet and solid under loads of 50 pounds of clay. The Model B has the table and drive system of the Model C, combined with a 110V, 60 cycle, 1/2 hp motor, for the power and weight
necessary for school use. The 12” head, permanently lubricated ball bearings, poly-v belt
drive, & foot pedal are the same components used on all Brent wheels. Splash pan included.
For 220V, add $50.00.
BRENTB with pan
Ship wt 112 lbs.
$1,395.00
BSPAN
Replacement splash pan
$ 49.95
Brent ie Model
The Brent ie model is a great wheel for the beginner. Handles up to 20 lbs. of clay and
features a 12” wheel head and removeable legs, and high density 1” thick wood table with
laminate surface. 1/4 hp, 5 amp motor. Ship wt 80 lbs.
BRENTIE
$930.00
BRENTIER
Reversing Model
$975.00
BSPAN
Optional splash pan
$ 49.95
BRENT IEX
BRENT16
64
Brent ie-x Model
The ie-x is very similar in to the ie Model, but has a 1/3 hp, 6 amp motor and can handle up to
25 lbs. of clay. Splash pan included.
BRENTIEX
$1025.00
BSPAN
Replacement splash pan
$ 49.95
Brent Model 16 Designed For The Handicapped. Wheel with special features
designed for the handicapped. The ideal wheel for use in any rehabilitation program. This
wheel is a 110V variable speed power wheel like the Model B with a 1/2 hp motor & a 12”
head, but the frame has been modified for people with special abilities. Possibilities include
use with a wheelchair, a standard stool, or while standing up. A crank mechanism adjusts
the height of the throwing head from 19-1/2” to 34”. The wheel head direction is reversible
& the speed can be operated by hand or foot. Splash pan included. For 220V, add $30.00.
FOB IN plus $135.00 freight from factory to East Coast. Ship wt 310 lbs.
BRENT16
$2,895.00
BSPAN
Replacement splash pan
$ 49.95
Equipment - Pottery Wheels
Brent Steel Kick Wheels / optional Motor
Brent Model J Steel Kick Wheel
BRENTJ
This steel framed kick wheel is designed for form and function. The flywheel is a full 135 lbs. of
concrete with steel reinforcement. It is rough on top near the 1” shaft for kicking, and smooth
near the rim for braking. The shaft is supported by high-quality ball bearings with cast iron housings. The head is 14” in dia. & the seat can be adjusted to fit any potter. A motor kit is available
to convert the Model J to a Model EJ motorized wheel. 5 year warranty. Includes splash pan. BRENTJ FOB IN add $155.00 freight from factory to East Coast.
Ship wt 325 lbs.
$1645.00
BSPAN
Replacement Splash Pan, same pan for all Brent Wheels.
$ 49.95
Brent Motor Kit for Model J Kick Wheel
This motor kit can be added to make Model J into a Model EJ motorized kick wheel. For more
information see the following description of the Brent EJ Motorized Steel Kick Wheel.
JMOTR
Includes freight to East Coast
Ship wt 50 lbs.
$950.00
Brent EJ Motorized Steel Kick Wheel
BRENT EJ
SEAT
This is the Brent J wheel motorized. It combines the quiet, strength, and control of a steel frame
kick wheel with the power of a 1/3 hp., 110V AC motor attachment. The 9” diameter solid rubber
wheel is driven by the motor through a small steel driving wheel and is engaged by a foot lever.
A motor switch shuts the motor off when the foot lever is released. The head is 14”. For 220V,
add $100.00. 5 year warranty. Includes splash pan.
BRENTEJ FOB IN add $155.00 freight from factory to East Coast. Ship wt 350 lbs. $2,695.00 BSPAN
Replacement Splash Pan, same pan for all Brent Wheels.
$ 49.95
Brent Wheel Accessories
Seat
Sturdy enough for extensive school use. Attaches directly to the wheel so it cannot be misplaced.
Fits Models B, C, and CXC, and is adjustable both for height and distance from wheel head.
SEAT
Size 8” x 8” x 16” H
Ship wt 22 lbs.
$289.00
Leg Extension Kit
Raises your wheel to standing height to reduce stress on your back. This leg extension kit fits
Models B, C, and CXC. Adjusts to a height from 31-1/2” to 42” H.
LEGEXTK
Ship wt 56 lbs.
$235.00
LEGEXT
Brent Booties
Designed to assist tall potter’s who throw sitting down. Packaged in a set of 3, and fits models
EX, CXC, C & B. Raises the wheel 2 or 4 inches
BRENTBOOT
Ship wt 10 lbs.
$ 36.00
BRENTBOOT
Splash Pan
Molded of strong, durable, high-density polyethylene. This two-piece splash pan fits all Brent
wheels to catch excess water. It just snaps under a special cleat attached to the top bearing with
no bolts, screws, or pins to get lost.
BSPAN
Ship wt 4 lbs.
$ 49.95
BSPAN
BWT2
Brent Worktables
Add versatility and convenience to your Brent® B, C, CXC or EX wheel. Store clay, modeling
tools, brushes, and other supplies on the surface or in cup holders to keep them within arm’s
reach. The Brent® WorkTables are 1/3” thick and are made from the same rigid, easy-to-clean
material as the AMACO® Plas-i-bat. These two tables attach to the front wheel legs and can be
independently adjusted. BWT1 is 16” x 10” and BWT2 is 18” x 10” with a 4 1/4” cup holder. Multiple positions for each table are possible by loosening one or more of the four knobs. Raise/lower
the support or rotate it in or out to desired position then tighten to secure. Available individually
or as a set.
BWT1
16” x 10”
$130.00
18” x 10” with a 4 1/4” Cup Holder
$130.00
BWT1BWT2
BWTSET Inclued BWT1 & BWT2
$249.00
65
Equipment - Pottery Wheels
Shimpo Potter Wheels
Shimpo RK Whisper
RKWHIS
The RK Whisper is the next generation of potter’s wheels. Responsive, high torque at all speeds,
powerful and QUIET. The motor is electronically controlled and operated by a fixed foot pedal
with hand lever. It is reversible, and the steel body is durable under all conditions. A 12” wheelhead and two-piece splashpan are included as standard features. Brushless DC motor; 1/2 hp,
400W, centering 100 pounds, 20”x21”x20”, speed at 0 - 250 RPM, reversible, weighs 93 lbs. 2
year warranty.
RKWHIS
$1095.00
RK10PAN Replacement splash pan - 23”L X 18”w x 5”H Ship wt 4 lbs.
82.50
Shimpo VL Whisper
The VL Whisper is the quietest wheel on the market. Brushless DC motor maintains speed
under all load conditions with the electronic controller. Other features: its reversible, a built in
breaker protects motor from overload, remote foot pedal, 14” wheel head, splash pan & adjustable height for all throwing positions. Removeable legs make for easy storage and is usable
as a table top wheel. Blue and white color. 2 year warranty.
VLWHIS
Ship wt 135 lbs.
$1195.00
VLSPAN
Replacement splash pan - 19” X 4 ½”
Ship wt 4 lbs.
$ 38.50
RKVL
Shimpo VL-Lite
Designed with the potter in mind, the VL-Lite is a belt-driven lightweight wheel. “Lite”
enough to carry yet sturdy enough to throw on. Featuring a remote pedal, two-piece
splashpan, workspace, 100-watt reversible motor, an automatic belt-tensioning system
and a “Lite” price.
VL-LITE
$665.00
Shimpo’s Aspire
A tabletop potter’s wheel, can handle your most creative challenges.
Its lightweight, compact design makes it easily portable; and yet its 20-lb centering
capacity makes it a permanent addition to any studio or classroom. The Aspire includes a
splashpan and two bats. Your “Aspirations” are its only limit. 2-year warranty.
ASPIRE
$435.00
ASPIRE-FP (Model with foot pedal)
499.00
ASPIRE
Shimpo Adjustable Stool
The adjustable leg stool allows nine (1” increment) slots to accommodate an assortment of
heights to accommodate everyone, and can be tilted to relieve strain on your lower back. The
tilt feature also puts you over your work to help you while centering on the wheel. The stool is
finished attractively with a white frame and blue seat. The adjustable leg stool not only serves
the potter but will also comfortably fill the needs of the painter and sculptor.
SHIM-STOL $59.95
SHIM-STOL
66
Equipment - Pottery Wheels
RK10 Splash Pan - Small
Two piece white plastic, economical and snug fitting interlocking splash pan. Use on all RK10,
Master & Velocity wheels. May be used with work tables.
RK10PAN-SM 4 ½” X 19 1/2 “
4 lbs.
$ 38.50
RK10PAN-SM
Shimpo Work Tables
Shimpo offers 2 sizes of solid HDPE plastic work tables which attach
quickly to the RK Whisper, RK10 Basic and Super, Master series (except
M1) and older RK2 models.
RKTABLE-SM
2 square feet of surface space
$ 50.00
RKTABLE-LG
4 square feet of surface space
$99.00
RKTABLE-LG
RKTABLE-SM
Jigger Arm
Made of heavy duty cast iron, this adjustable arm assists you in producing jiggered pieces up
to 7 ½” H & 11” in diameter. Attaches to all Shimpo wheels (except the M1).
JIGARM
Special order
$590.00
Ball Mill Rack
Attaches to all Shimpo Wheels when used with a 12” wheel head. This space saving rack will
allow you variable speed milling and grinding. The rack accommodates jars from 3 1/2” to 9”
diameter and up to 10” long. Heavy duty cast iron, the unique folding design lets you use your
wheel without detaching the rack.
BALLMILLSpecial order$480.00
Creative Industries Wheels & Accessories
Clay Boss Electric Wheel
14” wheel head. Solid state, variable 0 to 240 rpm electronic control with foot pedal. Sturdy
steel frame construction. Compact table size: 26” x 21”. Splash pan is included. 9” distance
between bat pins. 110V. 5-yr. parts & labor warranty.
CICB19
100 lb centering capacity
Ship wt 80 lbs.
$699.00
CICB19
Boss Elite SQ
New! 1/2" thick polyethelyne tabletop and expanded, raised work table. 1.0 horsepower industrial motor. 175 lb. centering capacity. Adjustable feet allow for leveling on uneven floors and
the ability to change the wheel head height. Load-sensing control with 110V or 220V capability.
Reversing plug for quick change wheel head direction. 14" wheel head same as
the Clay Boss. Foot pedal with smooth variable speed control (0-240 RPM). Easily removable Splash Pan included. 5 year warranty. 2 free bats, 1 each of B75 and B12.
CIELITE
Ship wt 95 lbs.
$ 899.00
Creative Industries Artista Wheel
The Artista wheel is a truly portable table top potter’s wheel that weighs only 26 lbs. It features
an 11” wheel head, ½ H.P. motor, centers 25 lbs. of clay. Includes a 2 part splash pan, variable
speed hand control, spacefor 2.5 quart buckets (included) for tools and water, 2 free bats: 1-7 ½”
square, 1-12”. Order left or right handed. 2 year warranty.
With instructional video.
CIARTISTA
Ship wt 35 lbs.
$ 459.00
CIELITE
Artista Accessories:
CIARTISTA-FP
CIARTISTA-SL
CIARTISTA-FL
CIARTISTA-CS
Foot Pedal
Leg Set (static or fixed)
Leg Set (folding)
Carrying Case
6 lbs.
6 lbs.
10 lbs.
20 lbs.
$ 89.95
$89.00
$189.96
$189.00
67
Equipment - Pottery Wheel Accessories
Wheel Accessories
Pot Bottom Grinders
Grind the bottom of greenware, bisque, and fired stoneware smooth! 12” diameter silicon
carbide grinding discs with a peel-off adhesive backing affix to any 12” bat. Wear eye
protection. Cleaning rate approximately 10-seconds/mug bottom.
PGRIND5
50-grit grinding disc for fast grinding (including small glaze drips)
Ea.
$9.95
PGRIND8
80-grit grinding disc for a smooth finish
Ea.
9.95
Foam Trimming Bat
Firm foam bat for trimming. Allows you to quickly set your work on any wheel for trimming, shaping, or texturing. Pliable foam grips regardless of irregularities in the shape of
your piece, bottom or top.
TRIMBAT
14” foam bat
Ship wt 2 lbs.
$19.95
TRIMBAT
Giffin Grip - Cuts your trimming time in half!
This device recenters your pots for trimming, throwing feet on your pots, waxing, banding,
& decorating. Easy to use; place your pot roughly on center, turn top plate until all arms
make contact, & gently push your pot to center. Trim with confidence. Includes 2 sets of
sliders for centering items up to 14”, and 5 sets of different sized arms for pieces of different heights. Adjustable to fit almost any wheel. Durable. Additional parts available.
GGRIP-RH Counterclockwise for right-handers
$206.11
GGRIP-LH Clockwise for left-handers
199.95
Flex Slider for Giffin Grip
Set of three sliders modified to allow individual adjustment of the holding mechanism for
working with asymmetrical pottery on the Giffin Grip.
GIFF-BWS3
$19.95
GIFFIN
GRIP
WHEEL HEAD
ADABAT
New Rods and Hands for Gifin Grip - 5 different size rod sets and 15 hands.
GIFF-R15W15
$ 49.95
Aluminum Wheel Heads
Company
WH1258
Amaco
WH1234
Amaco
WH121
Brent
WH14
Brent
SWH12
Shimpo
Price
$120.00
120.00
95.00
169.00
84.50
Dia.
12”
12”
12”
14”
12”
Bore
5/8”
¾”
1”
1”
5/16”
Adapt-A-Bat
Adapt-A-Bats are for wheel heads that are not drilled for 8” & 10” bats. Drilled to fit your
wheelhead, the Adapt-A-Bat includes two 3/8” dia. bat pins threaded 6” apart so that it can
accept 8” & 10” bats. Specify bat pin head diameter & distance between hole centers when
ordering. Constructed from specially formulated, tough, 5/16” plastic to provide rigidity &
tolerance for extended thread life.
ADABAT
14-1/8” Diameter
$34.00
BATMO
Batmobile
A strong, sturdy, easily movable unit that holds approximately 60-90 bats, depending upon
their thickness. Also includes a top shelf for almost any size bat or tools.
13”W x 35”L x 42”H.
BATMO
Ship wt 60 lbs
$425.00
Hydro-Bats
The Hydro-Bat is made of Hydro-Stone, a USG product containing cement and crystalline
silica, that is 8 to 10 times stronger then pottery plaster. The surface is scratch resistant yet
absorbs water like plaster eliminating the need to cut your pieces off the bat with a wire.
The Hydro-Bat was designed to fit on wheel heads that have bat pins spaced 10” apart on
center. The hard rubber grommets cast into the underside of each Hydro-Bat will not swell or
change shape and are sized to fit over a 3/8” diameter bat pin head. (If your bat pins are not
3/8” you will need to purchase new ones.)
HB10
HB12
HB14
HB16
68
10” Hydro Bat
12” Hydro Bat
14” Hydro Bat
16” Hydro Bat
$11.99HB18
18” Hydro Bat$29.95
$15.99HB20
20” Hydro Bat$46.95
$17.99HB24
24” Hydro Bat$59.95
$19.99HB28
28” Hydro Bat$75.00
Equipment - Pottery Wheel Accessories
BATIC
STOL
Bats - Drilled for Brent, Amaco & Shimpo Wheel Heads
All bats fit Brent, Amaco, current Shimpo and Creative Industries wheel heads. The
plastic (BATIC) bats are strong, stable, lightweight, & long-lasting. If your wheelhead is
not drilled to accept the 8” & 10” bats (NEW SIZES), see ADAPT-A-BAT. The pressboard (BATPR) bats are strong, thick, will not flex or distort moist work when lifting, &
can be sealed with acrylic sealer for longer life. Additional holes can be drilled in the
bats to fit other wheel heads’ pin placements, and the unused holes will fill up with clay
and cause little inconvenience. Universal plastic (BATUN) bats are molded plastic
ribbed on the underside to provide a hole free, smooth, level work surface on top.
These bats have additional provisions for 9” center to center pins. Duron (Masonite)
bats are made of moisture-resistant natural wood products, smooth on both sides. The
13” and 15” sizes give 1/2” of overhang on standard wheel heads for easy removal.
Material
Diameter
Price ea.
Each for 6
ADABAT
Plastic
14-1/8”
$34.00
BATIC8
Plastic
8”
9.95
$ 7.64
BATIC10
Plastic
10”
11.45
8.95
BATIC12
Plastic
12-1/8”
14.45
11.66
BATIC14
Plastic
14-1/8”
17.45
13.46
BATIC16
Plastic
16”
28.95
22.45
BATIC18
Plastic
18”
38.95
26.95
BATIC20
Plastic
20”
44.95
34.15
BATPR14
Pressboard
14”
14.95
12.56
BATPR22
Pressboard
22”
20.95
17.95
BATUN12 Plastic
12”
8.58
5.85
BATUN14 Plastic
14”
8.58
7.91
CIB75
Plastic
7-1/2” square
6.63
4.05
BATW12
Duron (Masonite)
12” (1/4” thick)
4.50
4.05
BATW15
Duron (Masonite)
15” (1/4” thick)
6.99
6.29
BATW18
Medex
18” (3/8” thick)
15.00
13.50
BATW21
Medex
21” (3/8” thick)
20.00
18.00
Bat Pins
Used to secure the bat to the wheel head. Set the bat pins into the holes provided in
the wheelhead & slip bats over the pins. Sold in pairs. Specify wheel brand.
PINBRENT
$ 2.87
PINSHIMPO
2.87
Potter’s Stool
This 18” high, heavy-gauge steel stool can be used with most electric wheels.
STOL
Ship wt 11 lbs.
$46.20
SHIM-STOL
Shimpo Adjustable Stool
The adjustable leg stool allows nine (1” increment) slots to accommodate an assortment of heights to accommodate everyone, and can be tilted to relieve strain on your
lower back. The tilt feature also puts you over your work to help you while centering
on the wheel. The stool is finished attractively with a white frame and blue seat. The
adjustable leg stool not only serves the potter but will also comfortably fill the needs of
the painter and sculptor.
SHIM-STOL
$59.95
Lester PlasterBat System
The Lester PlasterBat System is so easy to use that anyone can make the
PlasterBats and install the Adjustable Bat Pins. The PlasterBats and Adjustable Bat Pins for potters and students that want the benefits of plaster and the
ease and convenience of bat Pins. The system works on any wheel with bat
Pin holes. It is ideal for studios with multiple wheels and conveniently works
with other attachments. Simply make the PlasterBats with the PlasterBat Mold, install the Adjustable Bat Pins, and you are ready to
enjoy the benefits of plaster and the secure fit of bat Pins.
• USG No. 1 Pottery Plaster for Optimum Strength and Absorption • Flat, Smooth, Hard Working Surface • Snug, Secure Fit for
Faster, Easier Centering • Pots “pop off” the PlasterBat • PlasterBats promote Even Drying • Eliminates “S” Cracks on Wide, Flat
Pots • Wear Sleeves for Long Life
BATSYS
Includes Mold, 3/8” diameter PlasterBat Sleeves and Adjustable Bat Pins that have a 3/8” diameter head and a ¼ x 20 threaded shaft.
$89.95
69
Equipment - Extruders
Extruders allow uniform shapes to be quickly and easily reproduced. An infinite variety of solid and hollow forms, and even bowls
can be extruded. In addition, you can make your own unique forms by making your own dies of clay, metal, or wood. Extrusions
can be as small as a fraction of an inch and as large as 3 3/4” in diameter: simply fill the barrel with clay and push the plunger to
squeeze the clay through the die. Select the extruder to meet your needs.
North Star Extruder This extruder features a 4” barrel, tapered at the top for easy loading; & an all-welded steel construction with
durable blue enamel finish. The barrel holds 5-8 lbs. of clay. Quick & easy to reload. The handle is longer &
the barrel is smaller than usual, giving plenty of leverage without ratcheting. The handle is anchored at one
fixed pivot point, eliminating the danger of its falling on the operator. The curvature of the handle makes it
possible to load with the handle in a down position, eliminating danger from a hard-to-control handle. More leverage to push around less clay means this extruder is easier on your back and arms. Poly dies are abrasion
resistant & totally non-contaminating. The interior brace is stainless steel. Extrudes up to a 2½” square tube,
a 2½” round tube & a 41/4” ribbon tile strap by changing dies.
North Star Extruder
Complete with one handle & 13 dies: 8 coil, 2 handle, 1 hex, 1 square, 1 blank & die mask.
NSEXT
Standard barrel
$359.95
NSEXTS
Stainless steel barrel
409.95
Accessory Kit: Stainless steel die brace; 2 ribbon dies, 4 large coil dies and 2 sizes each: hex, round, & square tube dies.
NSACCKIT
$99.00
NSBLANK 6 UHMW plastic blank dies
32.50
NSACCKIT
North Star Die Sets
Individual Dies and Accessory Items
Basic Die Set
Blank Die Plate, solid coil dies, shaped coil die
and die mask.
NSDSBASIC
$55.00
Die Set #1 - Octagon and Stars
NSDS1 1,1/2, 2 - 6 Dies 3 of each
94.50
Die Set #2 - Ovals and Triangles
NSDS2 6 Dies 3 of each
94.50
NS925A
NS925B
NS925C
NS925DM
NS925T
NS927
NS951B
NS957
NS925A NS925B NS925C NS925DM NS925T NS927
Die Set #3 - Tile Accessory Set
NSDS3 Set of Seven
99.00
Die Set #4 - Hearts and Diamonds
NSDS4 1,1/2, 2 - 6 Dies 3 of each
94.50
Die Set #5 - Scallops
NSDS51,1-1/2, 2 - 6 Dies 3 of ea.
94.50
Die Set #6 - Coil Builder
NSDS6
1/2, 5/8, 3/4, 7/8, 1, 1-1/8
79.00
Die Set #7 - Triple Rope Handles
NSDS7
3 Dies - 3/4, 7/8, 1
79.00
Die Set #8 - Double Rope Handles
NSDS8
3 Dies - 1/2, 3/4, 1
79.00
Die Set #9 - Half Round Rope Handles
NSDS9
3 Dies - 1/2, 3/4, 1
79.00
79.00
NS957
North Star Big Blue Extruder
North Star Big Blue Extruder does
not look like or work like any others.
It is designed to be simple and safe.
This model features a 6 x 6 x 12 inch
aluminum barrel that holds a full 25
lb. pug of clay. Other notable features include: Rack and compound
pinion gear drive with detachable
Wagon Wheel Handle. That means
no dangerous levers or bars. Furthermore, the additional hazards
and corollary equipment requirements of hydraulic and pneumatic
drives are completed avoided. The
barrel lifts off - no tools needed. Fill,
clean and install dies at your workbench. Wall mounted. Flat one-piece stainless steel support for
center part of hollow dies. Plunger goes to within 1/2” of the bottom of the barrel so all but a tiny bit of clay is extruded. Dies furnished with the Big Blue Extruder include: Hollow round, square
and hex (all 41/2” OD with 1/4” walls), plus one blank die. One
year warranty. Other dies available.
Big Blue 6” Extruder
NS970 Big Blue Extruder with large Die Set
70
27.50
NS951B
Die Set #10 - Braided Ropes
NSDS10
$28.50
32.88
28.50
5.25
26.75
18.50
19.00
4 Solid handle cavities on 1 plate
2” hollow round - (requires Z brace)
2” hollow square - (requires Z brace)
Die mask - blocks off 3 cavities
4 1/4” solid ribbon tile strap die
Blank Z-slot die - use with Bead Brace
Bead Brace - used only for extruding
hollow beads
Z-Brace- needed by all hollow dies
$995.00
Equipment - Extruders
Ceramic Supply’s 4” Stainless Steel Wall Mount Extruder Package
T
he Ceramic Supply 4” Wall Mount Extruder (CSEXT) is engineered for heavy-duty studio or classroom use yet it is economically priced for everyone’s budget. The stainless steel barrel provides
important versatility allowing work with porcelain as well as other clays. The top of the barrel is
angled for easy loading. Holds approximately 7 lbs. of clay. Designed with an extra long handle for easy
strong leverage. Package includes the stainless steel extruder plus basic die et consisting of die 12, 13,
14 and rubber mask. 1-Year Limited Warranty. (Ceramic Supply warrants all parts from manufacturing
defect/based upon normal use).
CSEXT
4” Stainless steel extruder package Includes 4” stainless $322.91
steel extruder plus basic die set (CSDIESET4)
All dies are produced from 1/2” thick wear resistant plastic that is totally non contaminating. Additional die sets are available including hollow dies. Individual dies can also be
ordered. Black die is available.
Ceramic Supply Die Sets
CSDIE4
Individual Dies and Accessory Items
CSDIE5
CSDIESET1
Stars & Ovals
(die1, die2, die4, die5)
CSDIE2
$64.00 set
CSDIE1
CSDIESET2
CSDIE7
CSDIE3
CSDIE6
Octagon, Square & Triangle (die3, die6, die7)
$48.00 set
CSDIE10 CSDIE11
CSDIESET3
CSDIE8
CSDIESET4
Basic Die Set
CSDIE1
CSDIE2
CSDIE3
CSDIE4
CSDIE5
CSDIE6
CSDIE7
CSDIE8
CSDIE9
CSDIE10
CSDIE11
CDSIE12
CSDIE13
CSDIE14
CSDIE15
CSEXTRM
CSEXTTL
hollow die 2-1/2” star
hollow die 2” star
hollow die 1-1/2” square
hollow die 2-1/2” oval
hollow die 2” oval
hollow die 2-1/2” triangle
hollow die 2” octagon
standard die 1-3/4”x11/16” fancy top bar
standard die 1”x13/16” round top trim
standard die 2-1/2”x15/16” fancy convex bar
standard die 2-1/2”x15/16” convex bar
standard die-shaped coils 1/2” square, 5/8” hex,
3/4” ribbon, 1” ribbon
standard die coils – 1/2” 9/16”, 5/8”, 11/16”
standard die coils – 1/4”, 5/16”, 3/8”, 7/16”
blank die
rubber mask
hollow die tool
$21.60 ea.
21.60 ea.
21.60 ea.
21.60 ea.
21.60 ea.
21.60 ea.
21.60 ea.
21.60 ea.
21.60 ea.
21.60 ea.
21.60 ea.
21.60 ea.
21.60 ea.
21.60 ea.
8.64 ea.
10.80 ea.
10.80 ea.
Bars & Trim Standard
(die8, die9, die10, die11)
$64.00 set
CSDIE9
CSEXTRM
CSDIE15
Blank Die
$8.64
CSDIE12
CSEXTTL
Z tool
$10.80
CSEXTR
Rubber Mask
10.80 ea.
CSDIESET4
Basic Die Set
(die12, die13, die14, rubber mask)
CSDIE13
CSDIE14
$60.00 set
Included in Extruder Package
Brent Hand Extruder
Extrudes up to a 2” square tube, a 3” round
tube & a 3¾” wide slab by changing the die.
Bolts to either wall or table. Sturdy, all-steel
construction, with round barrel and easy-toremove cap for easy die changes. Barrel size
4”; approx. extrusion between ¾” and 3½”.
HX4
Ship wt 48 lbs. $525.00
Brent Standard Die Set
HX4DI
$56.00
Brent Hollow Die Set
HX4H
$119.00
71
Equipment - Slab Rollers
North Star Polaris Slab Rollers
With Polaris slab rollers, clay is fed through the rollers while sandwiched between two pieces of canvas. The Polaris
permits far less warping in the fire than any single-roll slab machine because clay is firmly & consistently compressed
from both sides over the entire length of the slab. Any textbook will tell you it is the best way to roll a slab. Knurled
rollers help pull canvas through in either direction with minimum effort. The same canvas can be used to carry or
move the finished slab without damage. Rolls slabs up to the width of the roller & as long as your work space permits. Adjustable rollers allow from paper-thin to 2-1/2” without using boards or shims. Built-in reference scale lets
you return to the same setting to 1/100 of an inch, not just the thickness allowed by shims.
Standard 24” Slab Roller Package
Comes with everything you need to make slabs in minutes. Includes 2-1/2” dia., 24” Slab Roller; 4’ steel frame worktable; tabletop (made of heavy plywood coated with a high-density overlay);
Wagon-Wheel handle; starter canvas; & instructions. Perfect for
the studio artist.
POLSP24 3 cartons (50, 35, & 35 lbs., ship UPS).
$899.95
Standard 30” Slab Roller Package
Same as POLSP24 above but with 30” Slab Roller with 2-1/2”
dia. rolls.
POLSP30 4 cartons (42, 55, 45, 10 lbs., ship UPS).
$995.95
Super 24” Slab Roller Package
24” Slab Roller with industrial 4” rolls. 6’ steel worktable, tabletop,
canvas, wagon-wheel handle, hardware and instructions. Machine
rolls in either direction, with a 2’ in-feed section and 4’ out-feed
area. There is a 4:1 reduction gear drive between the handle and
the bottom roller. Ideal for school use.
POLSUP24 4 cartons (60, 60, 45, 15 lbs., ship UPS). $1349.95
Super 30” Slab Roller Package
Same as POLSUP24 above but with 30” Slab Roller with industrial 4” rolls. Ideal for school use and production work.,
6’ steel worktable, tabletop, canvas, Wagon-Wheel handle.
POLSUP30 4 cartons (90, 70, 60, 10 lbs., ship UPS). $1699.95
Super 36” Slab Roller Package
Same as POLSUP36 above but with 36” slab roller
withIndustrial 4” rolls. Ideal for heavy school use
and production work.
POLSUP36 4 cartons (70, 60, 60, 15 lbs., ship UPS). $2095.00
Northstar Polaris Slab Rollers only (without table, Special order)
POL18
18”, 2-1/2” dia. rolls, crank handle, canvas,
hardware, instructions
POL24 24”, 2-1/2” dia. rolls, crank handle, canvas,
hardware, instructions
POL30 30”, 2-1/2” dia. rolls, crank handle, canvas,
hardware, instructions
POL30L 30”, 4” dia. rolls, Wagon-Wheel handle, canvas
POL36L 36”, 4” dia. rolls, Wagon-Wheel handle, canvas
CNV36 36” wide replacement canvas
Sh. Wt.
Cost
30 lbs.
495.00
35 lbs.
599.95
40 lbs.
60, 15 lbs.
80, 15 lbs.
Per yd.
699.95
1199.00
1499.00
19.05
Table Topper
Heavy plywood coated with a high-density overlay. For use with any Northstar
Polaris Slab Roller on your own table.
NSTABTOP
$149.95
Wagon Wheel Handle
24” Wagon Wheel Handle offers more precise control and gives better leverage especially for short people or those with arthritis of the hand or wrist.
POLWEL
Fits any Standard North Star roller
$78.50
Brent SRC Slab Roller
With its innovative cable design, the SRC represents the latest in slab roller technology. Ideal for the
hobby potter & practical for home & studio use. It can produce slabs 21” W x 40” L, in thickness’ from
1/8” to 1”. Available as either a table model or with easy-to-assemble, screw in legs. The legs are
constructed of heavy-wall steel pipe to provide a sturdy work surface. The table with legs is 36” high,
a convenient height for working with slabs. The simplicity of the cable drive, with its opposing rollers,
allows use of a light frame without bed flex. The cable is aircraft quality and is attached to the frame
with swivel ends to insure cable alignment and longevity. Although the frame is lighter than the Brent
heavy-duty slab rollers (SR14, SR20, & SR36), the SRC offers the same excellent quality, solid-steel
construction, & the same heavy cotton belting and canvas covered shims. The handle is solid hardwood.
The SRC uses time-proven shim adjustment to vary the slab thickness & comes with four ¼” masonite
shims (one is canvas covered), one 1/8” masonite shim, and a 1” particle board bed. Additional canvas
covered shims are available. Warranty on parts and labor is one year.
SRCT
SRCL
Table
Leg Set
Ship wt 180 lbs.
Ship wt 27 lbs.
Brent SR14, SR20 & SR36 Slab Rollers
SR20
SR36
SRC
$875.00
129.00
These sturdy machines are constructed of heavy-gauge steel pipe and plate, precision machined parts, permanently sealed bearings, and aircraft
quality cables. The beds consist of masonite shims which can be removed or added to vary the slab thickness from 1/8” to 1-1/4”. A canvas covered,
removable shim with a clay slab can be removed from the bed.
SR-14 Slab Roller - Rolls out slabs 14” W x 36” L. Roller can be used on a table or mounted on the optional leg set. Includes 3
masonite shims. Without leg set.
SR14
Ship wt 210 lbs.
$1695.00
SR14 Leg Set (Optional)
SRLEG
Ship wt 50 lbs.
295.00
SR-20 Slab Roller - Complete with roller & table. Rolls out slabs 20” W x 52” L. Includes 3 masonite shims.
SR20 Ship wt 487 lbs.
2250.00
SR-36 Slab Roller - Complete with roller & table. Rolls out slabs 36” W x 52” L. Includes 5 masonite shims.
SR36 Ship wt 706 lbs.
2895.00
Mini SRC Slab Roller - Portable, rolls out slabs 14” W x 15” L. Includes 1 shim w/canvas and 2 plain shims.
SRMINI
Ship wt 63 lbs.
640.00
72
Equipment - Slab Rollers & Wedging Tables
Ceramic Supply’s 30” Slab Roller Package
Ceramic Supply 30” Slab Roller (CSR30) is engineered for heavy-duty studio
or classroom use yet economically priced for everyone’s budget. Designed
with 2 2-½” aluminum alloy knurled rollers so that clay slabs are easily pulled
through. Knurling roller design allows for long lasting grip on the canvas
avoid warpage plus it allows you to slab paper-thin from end to end. Slabs
can be rolled in either direction. Easy-grip adjustment knobs operate simultaneously from either side of the roller allowing you to slab from paper-thin up to
2.75” thick.
to
Package includes roller system described above, table frame, counter tops and 2 handles and canvas. The
table frame is constructed of 14 gauge steel that is zinc plated then powder coated with a durable finish making it rust free. 4 feet of counter top, (2 feet on either side) that are waterproof and lightweight for easy and long lasting use and
designed to lock into place in minutes. With the Ceramic Supply Slab Roller, the sturdy wagon wheel crank handle is not an option.
You receive 2 handles, the standard crank handle and the heavy-duty wagon wheel. This provides you with further flexibility based
upon the job you are doing. 1-Year Limited Warranty. (Ceramic Supply warrants all parts from manufacturing defect based upon
normal use)
CSR30
30” Slab roller package
$895.00
CNV10
Extra heavy #10 canvas, 1 yard, 60” wide
$9.50
Shimpo Mini Slab Roller
Shimpo’s new Mini Slab Roller features a two-roller system with hand-lever and thickness indicator that
provide synchronized fine adjustment that can produce a thickness of 0-1”. Its lightweight (31 lbs.), compact design makes it easily portable; and yet its 16” X 24” table makes it a permanent addition to any studio
o r c l a s s - room.
SHI-1624
$ 560.00
Ceramic Supply’s Wedging Board
Ceramic Supply’s Wedging Board is 20” wide x 24” long x 2 1/2” Deep. 480 square inches of wedging surface.
Includes cutting wire with adjustable hook to keep it tight for smooth cutting. Also includes an adjustable wedging
canvas cloth which is 10 3/4” wide x 24” long. Plaster not included.
CSWB Ceramic Supply Wedging Board
$124.80
CSWB-PL
Ceramic Supply Wedging Board with Plaster
$185.00
Ceramic Supply’s Wedging Board with stand is 20” wide x 24” long x 2 1/2” Deep. 480 square inches of wedging surface. Comes with an adjustable stand that is 30” tall and can adjust up to 35”. Also includes cutting wire with adjustable hook to keep it tight for smooth cutting. Also includes an adjustable wedging canvas cloth which is 10 3/4” wide x
24” long. Plaster not included.
CSWBST
Ceramic Supply Wedging Board with Stand
$312.00
CSWBST-PL
Ceramic Supply Wedging Board with Stand with Plaster
$365.00
Wedging Board (Steel Frame)
624 sq. in. of wedging area. Heavy-duty steel, 20" x 24" x 2½” thick. Furnished with a fine steel cutting wire and canvas “snap on”
wedging cloth. Dark brown.
9615
Without plaster
Ship wt. 35 lb. $ 183.00
9615PL
With plaster
Ship wt. 95 lb. $ 240.79
Clay Bin with Wedging Board
Excellent for areas where storage is limited. Provides maximum convenience for the ceramist. Heavy-duty steel cabinet with
removable plastic clay container and lid. Front “tilt-out” bin opening provides easy access and hold approximately 140 lbs.
of clay. Cabinet: 16"D x 20"W x 30"H. Model #9615 Wedging Board bolts onto cabinet. Dark Brown with Antique Gold.
9420
Without plaster
Ship wt. 35 lb. $ 617.00
9420
9420PL
With plaster
Ship wt. 125lb.
685.00
Wedging Stand with Wedging Board
Heavy-duty steel table for wedging or kneading clay before forming. Stand is 19"D x 20"W and adjusts from 30" to 36" in
height. Model #9615 Wedging Board, 20" x 24" x 2½” thick, is included to form the top surface. Specify with or without
plaster. Furnished with canvas “snap-on” wedging cloth and fine, steel cutting wire with adjustable hook to keep taut.
Dark Brown.
9630
Without plaster
Ship wt. 50 lb. $ 443.00
9630
9630PL
With plaster
Ship wt. 110 lb. $ 515.00
73
Equipment - Pugmills & Clay Mixers
PM-071V
Shimpo Pugmills
NVA04S
Shimpo PM071 Pugmills have uniquely designed augers for taking in, mixing and vacuum
de-airing large quantities of clay. The body casting is made from aluminum die-casting,
which is free from corrosion. The bodycasting, augers, plates and all other parts are
removable for easy cleaning. Inside working parts are a combination of stainless and
aluminum die-cast.
The NVA-04S pug mill features newly designed twin augers and a forceful direct gear
driven motor. The high quality wedging and extruding capacity obtained makes this compact pug mill one of the most
efficient and competitive on the market.
Model
Main Motor
Specifications
Vacuum Pump
Motor Specs
Capacity
lb. per hr.
Tube
Opening
Hopper
Size
Outside Dim.
HxWxL
Shipping
Wt. (lbs.)
Price
NVA04S
1/2 hp,115V,1ph,60Hz
n/a
440
3.5”
5.5”x5.5”
36”x 16.5”x 29.5”
320
4,998.00
PM-071*^
1hp,115V,1ph,60Hz
*
800
3”
4 3/4”x 4 3/4”38”x 12”x 15”
190
2,450.00
PM-071V ^
1hp,115V,1ph,60Hz
1/3 hp,110V
800
3”
4 3/4”x 4 3/4”38”x 12”x 15”
230
3,300.00
All Shimpo Pug Mills available 220V,Inquire.*Vacuum Pump can be added at any time -$1,150.00. ^Optional tamper limit switch available,add $200.00
Soldner Clay Mixers
Pro Clay Mixer
A 300 pound mixing capacity, reinforced concrete tub mixer with stainless blades. The combination of stainless blades
and non-rusting concrete tub allows the luxury of not having to clean out after each use. Ideal for classroom situations. Slowly revolving (35 rpm) tub plus safety lid shutoff provide extra safety. Size: 40"W x 48"D x 31½”H. Can be
moved through most doors. 3 hp motor. Available 240V or 208V, single or 3-phase, Shipping weight – 850 lbs. Five
year guarantee on tub, two years on the motor.
SOLDNERPRO$6,142.00
Studio Clay Mixer
A half size version of the Pro Mixer. 1½ HP Motor, 240V or 115V. Size – 28"W x 34"D x 31"H. Shipping weight – 500
lbs. Five year warranty on tub, two years on motor.
SOLDNERSTUDIO$4,485.00
Stainless Steel Blades, Steel Frame and Reinforced Concrete Tub featured on both models.
Peter Pugger-Mixer
The Peter Pugger-Mixer is known worldwide as the only pugmill with the unique capability to mix and pug in a single clay
processing machine. The Pugger-Mixer does the work of two machines but costs less and only uses the space of one
machine. Superior engineering, high quality industrial components and a complete two-year warranty make Peter Pugger an excellent investment for studio or school. Pugger-Mixers recycle scrap as well as mix from dry powder. No need
to stand around and hand feed like a standard pugmill. Load the clay scraps (wet, dry, slip, slop, powder or greenware) in
the oversized hopper, close the lid, push the mix button and GO DO SOMETHING ELSE. Push the pug button and the
Pugger-Mixer empties itself in a homogenized log of clay. The Pugger-Mixer shuts off automatically when the lid is opened
- preventing any contact with moving blades.
The VPM20 and VPM30 Power Wedges are designed to remove air during the last stage of mixing, leaving air-free pugged clay ready to throw.
Easily operated and cleaned by a single person - it is like having a tireless 24-hour assistant. An optional stand is available for the VPM-20
table-top model. With over 30 years of proven performance in working, private and educational studios, these rugged machines continue to win
enthusiastic acclaim for efficiency, safety and ease of operation.
Model
Motor
Specifications
Batch
Capacity
Pug Size
Outside Dim.
Pug Size
Shipping
Wt.(lb)
20-30 lbs.
3”
125-175 lbs.
250
Price
No Freight
VPM20
1hp,120V,1ph,10.3A
VPM20STAND
Stand for VPM20
VPM30
1.5hp,120v,1ph,16A
or 208V-240V,1ph,8A
30-40 lbs.
3”
46”x 20”x 33”
410
5,480.00
VPM60
2hp,220v,1ph,12A
70-100 lbs.
3-1/2”
31”x 24”x 58”
500
6,899.00
PM50
2hp,208-220v,1ph,12A
60-85 lbs.
3”
46”x 20”x 30”
400
4,749.00
PM100
2hp,208-220v,1ph,12A
125-175 lbs.
4”
58”x 26”x 31”
600
5,999.00
225.00
The Bluebird 440 De-airing Pugmill
The Bluebird 440 de-airing pugmill is rated at 300 pounds per hour and offers reclaiming and extruding capabilities. Stainless Steel shaft and blades. 1/3 Hp.; 115 volts;
BB440 Bluebird Model 440 Puggmil$2749.00
74
$4,199.00
Equipment - Slip Casting
Compact Size Casting Station that Pumps In and Pumps Out 1/2 HP
The Model M30 has a unique reverse-action pump that allows for both filling and draining molds with
the flick of a switch. The machine has a 1/2 hp motor. The drive assembly has no bearings or seals
exposed to liquid and provides for gently mixing agitation to keep slip in perfect pouring condition. The
top cover helps eliminate moisture loss and allows slip to be stored for weeks at a time in the 30-gallon
stainless steel tank. Fully mobile on heavy-duty casters. Fully assembled. 27" diameter by 45" H.
M30
Ship wt. 105 lb.$1450.00
Casting Stations that Pump In and Pump Out, 1/2 HP
These models use the pouring and reverse action of the M30, but they feature a rectangular fiberglass tank with a dowel-draining top as well. They will both fill and drain molds with the flip of
a switch. The drain tube attaches easily to the pouring nozzle and is designed to eliminate the
possibility of collapsing the greenware. The pump provides gentle mixing action in either the forward or the reverse position. Heavy-duty, 1/2 hp motor. The 30-gallon fiberglass tank is supported by a rigid steel frame that will hold over 3000 lb.
RD30
48"L x 24"W x 43"H (on casters)
Ship wt. 130 lb. $1760.00
RD630
68"L x 28"W x 46"H 1835.00
RD630M On casters Ship wt. 160 lb.
1935.00
RD30
Porta Potter Casting Station, 1/3-HP
Low-slung, solid-fiberglass machine mounted on four casters; rolls easily under our Cast Top Jr. (STJL) or other casting tables. Measures 25"L x 21"W x
22"H and holds 30 gallons of slip. Powered by a 1/3-hp motor. An 8' x 1" pouring house and utility nozzle are included. Gentle agitation keeps slip in proper
pouring condition. Convenient, individually mounted dowel top. Shipped
partially disassembled. Also available with longer legs, 30”H, (“T” version.)
PP30
Ship wt. 70 lb.
$ 835.00
PP30T
875.00
PP30T
STJL
PP30
30-Gallon Mixer/Reclaimers, ½ HP
These slip blender/reclaimers have served the industry for over 15 years. The plastic tank is guaranteed for 5 years. The new stainless
steel cover is hinged at the middle, giving a big top opening for easy loading when mixing slip from dry materials, and then seals airtight.
30B
30 gal, 20" dia. x 55"H
Ship wt. 64 lb.
$ 675.00
30B
Mitey Mite Slip Reclaimer/Mixer, 1/2 Hp
The Mitey Mite will reclaim all your scraps, trimmings and broken greenware and will keep your slip constantly mixed.
This balanced machine includes a polyethylene, 10-gallon tank which is guaranteed for five years, a 1/2 hp heavy-duty
electric motor, a stainless steel shaft and an aluminum mixing blade. Also included are a ¾” outlet
faucet and plastic lid, which allows you to store slip almost indefinitely. 16"L x 8"W x 20"H. Fully
assembled. Instructions included.
MM1
Ship wt. 24 lb.
$430.00
BR6
Mixer with Bucket, 1/2 HP
This electric mixer attaches to a 6-gallon bucket (included) to make mixing slip or glaze easier.
Comes complete with a 1/3 hp motor with convenient handle, stainless steel shaft and 4" aluminum mixing blade.
MM1 BR6 6-gal.
Ship wt. 28 lb.
$375.00
Economical 7’9" and 5’7" Casting Stations
Combining the Cast Top with the EX4 exterior pump makes these the most economical casting tables in the industry. Complete
with 8' hose and utility nozzle. The CT850 has a holding capacity of 50 gallons and measures 96"L x 32"W. The CT630 has a capacity of 30 gallons and measures 67"L x 28"W. The pump has a capacity of 8 g.p.m. Easily removable dowels support large and
small molds. Rigid steel legs support up to 3,000 lbs. Optional mixer (OPT) is CT630
CT850
available to make this a mixing or reclaiming unit as well as a casting machine.
CT850
8'
Ship wt. 195 lb.
$1785.00
CT630
6'
Ship wt. 154 lb.
1430.00
CT630M 6' with casters
Ship wt. 154 lb.
1530.00
Economical 4' Casting Station
CT425
A complete station that combines the very popular Cast Top JR. and the EX4
pump. This unit is the most economical 4' casting table in the industry. The holding capacity is 25 gallons and pumping capacity
is 6 g.p.m. The birch dowels remove individually for easy cleaning. With its rigid steel legs, it will hold over a ton of weight on four
heavy-duty casters. The unit is only 48"L x 24"W x 32”H.
CT425M
Ship wt. 128 lb.
$ 1225.00
75
Equipment - Slip Casting
8’5" and 5’7½” Complete Casting Stations, ½ HP
T100
T60
The Models T60 and T100 continue to be the most popular casting tables in
the industry today. These casting machines offer the user a reliable, maintenance-free casting station. Both units come complete with a ½ HP, externally
mounted, belt-driven motor. The pumps have no bearings or seals exposed
to the slip. The unique flow-thru design provides gentle agitation that begins
in the bottom and stirs throughout the tank. The 40-gallon tank is buffed and
waxed at the factory, making it easy to clean. The rigid steel frame evenly supports weights to 2 tons. The gas-type nozzle allows
the user to control the slip flow from a trickle to a full flow of 6 gallons per minute. See optional mixer (OPT) for clamp on reclaimer.
The T100 measures 30”W x 96”L x 31”H and the T60 measures 30”W x 64”L x 31”H.6
T100
8’
Ship wt. 210 lb.
$1915.00
T60
6'
Ship wt. 140 lb.
1710.00
Slip Pumps
EX4
SP4
Medium Duty Suspended Pump, 1/2 HP Motor
Complete with an 8' x 1" hose with utility nozzle. Pumping capacity of 6 g.p.m. Mounts with provided brackets in either a round or a square container. SP4 working depth of 20"; SP4L working
depth 29”.
SP4
Ship wt. 25 lb.
$410.00
External Pump, 1/2 HP Motor
This external pump can be used to convert any container to a slip casting machine. Complete with
a 8' hose and 1” utility-type nozzle. Pumps about 7 g.p.m.
EX4
Ship wt. 26 lb.
$405.00
China Challenger Pump with 6-Gallon Bucket
Pump is powered by a 1/3 hp motor and puts out about 4 g.p.m. through a built-in screen and a ¾” hose with a spigottype faucet. The unique lid/motor mount assembly seals down airtight for convenient storage. Shipped fully assembled.
CC6
6 gal.
Ship wt. 35 lb.
455.00
CC6MB
Mobile Base
Ship wt. 5 lb.
64.00
CC6
Clamp-On Mixer, ½ HP or ¾ HP
COM
OPT
This universal clamp-on mixer, used for slip or glaze, will fit onto almost any tank. Simply hand tighten to the
tank and it will adjust to several different angle positions. Both motors come with 2 mixing blades and a 30"L
shaft. This unit can be built to your specifications changing the motor hp, shaft length or number of mixing
blades. Inquire.
COM ½ hp
Ship wt. 40 lb.
$ 535.00 COM34 ¾ hp Ship wt. 45 lb.
675.00
Clamp-On Mixer, 1/2 HP
Mixer/reclaimer unit can be added to any slip casting table. Installs directly on dowel top. Installed permanently
or move from unit to unit. Includes shaft, aluminum mixing blade and mounting bracket.
OPT
Ship wt. 20 lb.
$ 375.00
Economy Casting Table Top
Thise molded casting tables are ideal for shops or hobbyists. The tank, which has a 5-year warranty,
has a bottom which slopes to the center outlet and has a unique stopper rod to hold slip till ready to
drain out. The top is covered with removable dowels.
Available in 4 sizes to suit any needs. The STJL measures only 24” x 42” x 30”H and is ideal for tight
spaces. The ST7L is twice as long, 26” x 86” x 33” and holds approximately 20 gallons. The CT6L
and CT8L have a larger capacity though area. The CT6L measures 28” x 72” x 33”; the CT8L measures 28” x 96” x 33”.
CT6L
Ship wt. 120 lb.
665.00
Replacement Hose and Nozzles
Hose – Replacement nylon braided hose, order by the foot, specify ¾” dia. or 1" dia.:
HOS34
¾” hose per ft.
$ 6.00
HOS1
1" hose per ft.
4.00
Nozzle – Replacement nozzles for pouring machines using ¾” or 1" hose, specify:
NOZ34
using ¾” hose
$38.00
NOZ1
using 1" hose
39.00
76
Slip Casting Accessories
Slip Mixing Accessories for Controlling the Quality of Your Slip
Slip, the basis of the hobby ceramic industry, will vary from batch to batch & day to day.
This equipment will allow you to produce a more consistent, high-quality slip.
Slip Dope
A liquid deflocculant especially formulated to be fast, effective,
& compatible with all low-fire hobby bodies. With Slip Dope,
viscosity can be lowered without the addition of unnecessary
water that can ruin slip. Complete with instructions.
SD8
8-oz squeeze bottle
$7.00
SD32
32-oz refill
14.00
Hydrometer
The hydrometer will allow you
to check the consistency of
HYGL
your slip each time you make or use it. Simply
lower the hydrometer gently into the mixture
& take a reading of how far the liquid rises on the scale. With
this reading you can adjust the liquidity of your mixture. When
reclaiming slip, a hydrometer is a necessity. Detailed instructions enclosed.
HYGL For Slip & Glaze
Ship wt.1 lb.
31.95
Viscosity Cup
Used to check the viscocity of slips and
glazes by timing the amount of liquid as it
drips from the cup. TL497
$ 24.99
Stainless Steel JIFFY MIXERS - Use with Electric
LM1010-1/2" pint 1-1/4"
HS10 10-1/2" 1-2 gal. 2-3/8"
HS15
15" 1-2 gal. 2-3/8"
HS30
30" 1-2 gal. 2-3/8"
ES21
21" 2-5 gal. 3-1/4"
PS21
21"
5 gal. 4-1/2"
PS40
40"
5 gal. 4-1/2"
HD40
40" 50-55 gal. 9"
Slip Mold Catalogs
Bottom Depth Shaft
Dia. of Head Dia.
1-1/4" 1-1/4"
2-3/8" 2-1/2"
2-3/8" 2-1/2"
2-3/8" 2-1/2"
3-3/4" 3-3/4"
5"
5"
5"
5"
10"
10"
Mend-A-Mold APT-II
The best way to repair a mold. Bonds quickly & stronger
than any other product available. Can also be used to
repair molds by building up with plaster.
MOLDMND
1 oz.
$4.00
Mold Release +
Aerosol sprays without fluorocarbons (NON-CFC). Spray
onto the inner surface of the mold to aid in the release of
the greenware. Will not affect the greenware. Ultra-fine
atomization, its parting film yields longer life to molds.
MREL 10 oz. Krylon
$11.53
For additional Mold Releases see Index.
Mold Accessories
Rubber Bands
For banding molds. Rubber bands are
5/8” wide. Available in 1 lb. pkg. 25%
discount on 12 packages.
Band
Drill
These stainless steel mixers offer an
easy way to handle most mixing jobs
including slip, glaze and paint. Simply attach the Jiffy Mixer that suits your needs
to an electric drill. Drills with 450-700
rpm’s – the best rate for thorough mixing. These mixers can also be attached
permanently to a stationary motor.
Mixer Shaft Cotainer Top
Model Length size
Dia.
See Casting Slips Page 5
1/4"
1/4"
1/4"
1/4"
3/8"
1/2"
1/2"
3/4"
Price
16.50
14.00
19.53
23.53
45.35
49.95
81.93
199.95
There is not enough room in our Ceramic Supply catalog to show
the thousands of mold designs available from the various mold
companies. For a complete description of the molds we offer,
including color photos and prices, you may purchase catalogs of
the mold companies listed below.
CLA-CAT
Clay Magic
6.00
CD-CLA
Clay Magic-CD
10.00
CLA-TLCAT Clay Magic TL Designs
4.00
CPI-CAT
Creative Paradise
8.50
CPI-TLCAT Creative Paradise TL Designs
4.00
DM-CAT
Duncan Classics
8.50
DM/SCI-CAT Duncan/Scioto
9.50
SCI-CAT
Scioto Classics
9.50
Approx. Mold
Size
RUB3
3”
RUB4
4”
RUB5
5”
RUB6
6”
RUB7
7”
RUB8
8”
RUB9
9”
RUB10
10”
RUB54
Assorted
Circumference
10” - 16”
13” - 20”
16” - 24”
20” - 27”
24” - 30”
27” - 46”
30” - 49”
33” - 52”
10” - 46”
Banding Straps (Universal)
Polyester-webbed mold straps with
extra-strong buckle that fastens
the mold tightly and yet releases
instantly on demand. So strong that
most molds need only one band.
Color coded for easy length identification.
1” Wide Universal Banding Straps
No
Size
Color
Ea.
US3
3’
Yellow
4.25
US4
4’
Green
4.75
US5
5’
Blue
5.25
US6
6’
Orange
4.73
US7
7’
Red
5.10
US8
8’
Gold
5.48
Ea/5
2.88
3.18
3.48
3.78
4.08
4.38
½” Wide Little Universal Banding Straps
US1S 18”
Black
$2.25
$1.80
US3S 36”
Yellow
2.48
1.98
US4S 48”
Green
2.98
2.10
1 lb. Pkg.
8.75
8.75
8.75
8.75
8.75
8.75
8.75
8.75
8.75
Ea/12
2.52
2.79
3.05
3.31
3.57
3.84
$1.158
1.74
1.84
Mold Trimmers, Cleaners & Tools For other tools, see Index.
Mold Trimmer
P2
$.99
77
Equipment - Glazing
Glaze & Slip Making Supplies
Sieves Talisman
A production sieve for the
busy studio. Provides an
easy, fast, efficient method for all the mixing &
grinding usually done by
hand sieving. Now, fine
mesh screening is made
possible & easy. For wet
or dry chemicals.
1.Select 40, 60, 80, 100, 120, 150, or
200 mesh screen.
2. Push screen into position. Screens
have a rubber, molded perimeter.
3. Rotate the handle to press the internal
“brush cluster” against the screen.
The brush cluster is made with nylon
bristles impregnated into the plastic
back. Brushes will not absorb color
and are easily cleaned. Glazes are
passed through screen instantly.
The Production Unit comes complete with
brush & one screen of your choice.
Specify mesh size as follows:
TALIS40
$210.00
TALIS60
$210.00
TALIS80
$210.00
TALIS100
$210.00
TALIS120
$210.00
TALIS150
$210.00
TALIS200
$210.00
For additional screens, see below.
TALBR Replacement Brush ea. $6.00
TALBRHOL Brush Holder
$22.50
Interchangeable Screens
Another innovation by Talisman. You can
order screens that can be interchanged or
replaced. Specify 40, 60, 80, 100, 120, 150,
or 200 mesh screens as needed.
Screens
Good for use with the talisman (TALIS)
above. Specify mesh size as follows:
TALSCR40
ea. $41.27
TALSCR60
ea. $41.27
TALSCR80
ea. $41.27
TALSCR100
ea. $41.27
TALSCR120
ea. $41.27
TALSCR150
ea. $41.27
TALSCR200
ea. $41.27
Talisman Test Sieve
This is a s mall sieve for
sifting small amounts of
glaze for tests and for making ingredients for use in an
airbrush. It comes in 40, 60,
80, 100 and 200 mesh.
TALTEST40, 60, 80, 100
TALTEST200
Sieves:
24.00
24.00
We recommend using a 30-mesh sieve
for slip, a 60 mesh sieve for glaze, and
an 80 mesh sieve for oxides and stains.
78
Sieves Polyethylene
Strong, flexible 1-gal.
bowl with fused 6½” brass
screen.
P30
P40
P60
P80
P100
P120
P150
P200
Viscosity Cup
$24.95
24.95
24.95
24.95
24.95
24.95
24.95
24.95
30 mesh
40 mesh
60 mesh
80 mesh
100 mesh
120 mesh
150 mesh
200 mesh
Mixing Supplies
Mixing Bowl
Sturdy, 6-quart bowl for all your mixing
needs.
BOWL 12” dia. x 6” high
t
$4.99
Spatula
Flexible &
sturdy. For
pressing tough chemicals through sieves,
& stirring thoroughly in bowls.
SPAT
$2.46
Stainless Steel JIFFY MIXERS - Use
with Electric Drill
These stainless steel
mixers offer an easy
way to handle most mixing jobs including slip,
glaze and paint. Simply
attach the Jiffy Mixer
that suits your needs to an electric drill.
Drills with 450-700 rpm’s – the best rate
for thorough mixing. These mixers can
also be attached permanently to a stationary motor. See page 77 for details.
Gleco Clay Traps
Scoops
Rugged aluminum
scoops. Eliminate contamination by ordering
one for each bin.
SCP5
2½” x 4¾”
SCP12 3¼” x 5¾”
SCP24 4” x 7”
Used to check the
viscocity of slips and
glazes by timing the
amount of liquid as it
drips from the cup. TL497
$ 24.99
5 oz $ 4.75
12 oz
5.99
24 oz
7.99
Hydrometer
Check the consistency of your
glaze & slip each time you make or use
it. This measure allows you to adjust
the water content of your mixture. See
Index for additional info. & slip making
equipment.
HYGL For glaze and slip
$31.95
Glaze Dipping Tank
Strong, durable Rubbermaid
containers with lock lids, excellent for wet or dry clay storage
and dipping glaze. Will not leak
or rust. Hand grips for easy lifting. Flat
lids allow stacking for space-saving storage.
9411
10-gallon with lid.
$40.00
9412
20-gallon with lid
$52.92
9414
32-gallon with lid
$71.90
Replacement Lids
9412L 20-gallon lid
15.70
9414L 32-gallon lid
19.99
Dolly
(use with Containers 9412 and 9414)
Easily twists on and off to
provide mobility. Strong
enough to easily move full
containers (200 lb.)
9413
Dolly
$84.00
The Gleco Trap
provides you with
an economical
plumbing trap that
is easily installed
and maintained.
The Gleco Trap is
connected below
the sink and collects
solids in a bottle,
which has a fill line.
When the solids reach the fill line, the
trap is drained through a valve, the bottle
is exchanged with a replacement bottle,
the valve shut and the trap is back in
service. Bottle exchange is rapid and
done without the need of tools (less then
2 minutes!). Most of all, there is no mess
and less chance of water spillage.
All Complete Packages come with the following materials to aid with installation.
(1) Extra Bottle with Lid, (1) 1 1/2” x 8”
sink tailpiece, (1) 1 1/2” trap tailpiece, (2)
1 1/2” slip-joint washers, (4) 1 1/2” slipjoint nuts, (1) 1 1/2” flat washer,
(1) Extra O-Ring, and complete instructions.
GT19 19 oz. Package$100.00
GT43 43 oz. Package$100.00
GT64 64 oz. Package$100.00
Replacement Bottles
GTB19 19 oz. Bottle$5.75
GTB43 43 oz. Bottle$6.00
GTB64 64 oz. Bottle$6.00
GTB128 128 oz. Bottle$8.00
Equipment - Scales
Ohaus Triple Beam Scales
Ohaus offers 5 models of triple beam scales for studio use. These scales all have a 0.1 gm sensitivity & a capacity
of 610 gm which can be expanded to 2610 gm with the addition of the weight set OH707. Each model has the same
precision & ruggedness with differences only in their platform & container systems. Models OH750S & OH760 have a
6” plate; the Model OH760 has an additional tare bar to provide for a choice of containers; the Model OH710 has a 6”
pan; & Models OH720 & OH720S have scoops.
Scale Accessories
Scale 750S - with Stainless Steel 6” Plate
OH750S
Scale 750SW - includes 707 weight set
OH750SW
$147.00
$201.92
Scale 760 - With Stainless Steel 6” Plate & Tare Bar
This scale has a fourth bar which is a counter balancefor
use with any container weighing no more than 225 gm.
OH760$213.00
Scale 710
With Removable Stainless
Steel 6” Pan, ¾” deep pan
OH710
$205.00
Scale 720
With Plastic Scoop
Removable 12” x 6” x 2-3/4” footed
scoop.
OH720
$243.00
Scale 720S
With Stainless Steel Scoop
Removable 12” x 6” x 2-3/4” scoop.
OH720S
$282.00
Scoop - Polypropylene Plastic
Plastic footed scoop. 12” x 6” x 2-3/4”
OH703
With counterweight
$33.00
Scoop - Stainless Steel
Footed scoop. 12” x 6” x 2-3/4”
OH703S
With counterweight
$76.00
Scoop - Polypropylene Maxi
For large volume weighing. With pouring
spout. 10” diameter x 2-1/2” deep.
OH704
With counterweight
$36.00
Dust Cover (Vinyl)
OH706
$14.95
Weight Set
Two 1000 gm & one 500 gm weights store conveniently in base of scale. Increases capacity of
scale from 610 gm to 2610 gm.
OH707
Set
$50.00
Poise
Replacement poise, specify beam.
POIS10
$9.70
POIS100
POIS500
Used on 10 g beam Used on 100 g beam
Used on 500 g beam
13.50
17.63
My Weigh Triple Beam Scale Set
A great scale at a great price. The My Weigh scale is a
classic triple beam scale with a capacity of 2610 grams
accurate to within
0.1 gram. 6” round
stainless sell platform, includes set of
3 weights. Manufacturer offers a lifetime
warrant.
TBSCALE$89.99
79
Equipment - Spraying
Spray Booth
Amaco
The #1 spray booth is
constructed of steel,
features a 3/4 hp motor
and an increased exhaust delivery of 1361
CFM maximum with
0.0 static pressure.
The oversized 3” flange that surrounds the
front of the book is designed to deflect any
spray material from coming out around the
edges. The 12” fan moves air out through
a back opening where a standard 10” duct
can be attached to vent to the outside. The
#1 spray booth operates on 110V AC. It is
supplied with an AL5 decorating wheel and
is shipped assembled. Use only with AP
non-toxic glazes. Optional stand shown
has adjustable legs. Spraying area: 24” W
x 24” D x 26” H. Outside dimensions: 24”
W x 44” D x 26” H
SPBOOTH1 Ship wt 180 lbs. $ 2140.00
Spray Booth Replacement Filters
SPFILT
$
16.95
Amaco Spray Booth Stand
Height can be adjusted from 49-1/2”
- 54-1/2”.
SPSTAND1 Ship wt 33 lbs. $ 450.00
Compressors
Economy Air Compressor 1/10 HP
An economical compressor, suitable for most
airbrushes and properly thinned fluids (NOT
suitable for SPGUN).
Capable of delivering
up to 30-lbs. pressure
COMP10
(30 PSI), this 110V, oil-less
diaphragm unit comes with a three-wire
cord.
COMP10
w/o on/off switch $149.00
COMP10S with on/off switch 147.00
Studio Air Compressor 1/4 HP
This durable, quiet oil-less
diaphragm air compressor
is designed for use with
any airbrush and delivers approximately 30 lbs.
pressure. Equipped with
cord, 110V.
PAC14
w/on-off switch
PAC 14
$289.00
Replacement Parts for above PAC14SP:
Plastic Quart Container
SPCONT
$ 15.95
SPGAS Fiber Gasket for SPCONT $ 1.75
Hose 15 ft.
SPHOS Hose w/coupling
$ 24.95
“H” Airbrushes
Paasche airbrushes are dependable,
adaptable, and the world’s most popular
among hobbyists, teachers, and professionals. The airbrushes are single-action,
with air controlled by a finger button. The
80
fluid flow is adjusted in a separate action. Airbrushes are
available in 3 different
spraying patterns, or in
a set with attachments,
which offers you the flexibility of changing
between the 3 patterns.
Moisture Trap
Can be
inserted into
airhose HHOSE to remove water from
airline, thus preventing moisture damage
and inconvenience.
MTRAP
$15.77
Airbrush “H” Set
Extra Color Bottles
This set includes all 3 nozzles described BOT12 comes with lid & gasket.
below for easy conversion of the airbrush BOT12
½ oz
Glass $ 1.45
to the three different “H” brush sizes. Com- BOT1, BOT3 & BOTPL3
plete with airbrush; three size tips; ¼ oz. Order lids & gaskets separately.
color cup; 6-ft. airhose; ½ oz., 1 oz. and BOT1
1 oz
Glass
1.35
3 oz. bottle assemblies; wrenches; and BOT3
3 oz
Glass
1.60
instruction booklet.
BOTPL3 3 oz
Plastic
1.60
PHSET
$97.00Lids & Gaskets
BLID12
Repl. for BOT12
$ .80
Airbrush “H” with smallest pattern *
BLID1
Lid for BOT1
.85
For light coverage. (1/32” to 1”) for light
BLID3
Lid for BOT3
.85
materials, inks, oils, & stains. Complete
BGASK1 Gasket for BOT1
.75
with ¼ oz. color cup and instructions.
BGASK3 Gasket for BOT3
.75
PAH1
$56.00
Airbrush “H” with medium pattern *
For medium coverage (1/32 to 1¼”) using
thinned glazes, enamels, lacquers, and
varnish. Complete with ¼ oz. color cup
and instructions.
PAH3
$64.00
Airbrush “H” with largest pattern *
For fastest coverage (1/32” to 1½”) for
most free flowing materials such as
ceramic glazes, underglazes, or stains.
Complete with ¼ oz. color cup and
instructions.
PAH5
$64.00
* Bottle assemblies, bottles, lids, gaskets, & hoses are sold separately.
Parts & Accessories For PAH1,
PAH3, or PAH5 airbrushes.
Aircap-Tip-Needle
Caps
HCAP1
Ea.
4.80
HCAP3
Ea.
4.80
HCAP5
Ea.
4.80 Tips
HTIP1
Ea.
5.50
HTIP3
Ea.
5.50
HTIP5
Ea.
5.50
Needles
HNED1
Ea.
6.95
HNED3
Ea.
6.95
HNED5
Ea.
6.95
Airhose
For “H” airbrushes. 6 ft., incl. couplings.
HHOSE
8.80
Extra Bottle
Assemblies
BOTAS12
1/2 oz.
BOTAS1
1 oz.
BOTAS3
3 oz.
BOTASPLAS33 oz.
Glass
Glass
Glass
Plastic
5.95
5.95
6.05
6.95
Air Pressure Tank
Pressure Tank (Propellant Can)
Non-CFC (Non-Ozone Depleting)
8.5 oz. can of propellant contains
New Propellant Blend, which is
not hazardous to the ozone in the
upper atmosphere. Depending on
the airbrush & type of fluid being
sprayed, this tank can provide air
pressure for short periods of time, and
is recommended when electricity is not
available.
PPTNK8
8.5 oz
$8.35
Valve for Pressure Tank
Brass valve used to control the
air volume from the pressure
tank (propellant can) to the
airbrush.
PPVLV
$7.55
Sprayers
Paasche 3 oz. Sprayer
Operates on relatively low
air pressure
(20-40 PSI) & efficiently
handles glazes & mediumconsistency materials. Fills the need
between an airbrush & an airgun.
PSPRY includes 3-oz. bottle*$49.00
*Order hose separately (PSHOS below)
Parts & Accessories
BOT3
Bottle - 3 oz. glass$1.60
BGASK3 Gasket .75
PSHOS Airhose - 6 ft.
11.95
Mouth Sprayer
Use your mouth to spray
glazes or oxides on clay
works, easily and quickly.
Inside the metal container
is a tiny tube from the bottom to the top.
When you blow air through the top pipe,
you create suction that pulls the liquid up
through the vertical tube, and the liquid
exits the sprayer as a mist.
MSPRAY10 100 ml Capacity $18.00
Equipment - Banding Wheels
Banding/Decorating Wheels
Ceramic Supply
Heavy-Duty Sculpture/Banding Wheels
SH12
SH10
SHL9
SHL10
Heavy-Duty Banding/Decorating Wheels
Cast Iron Wheel – Shimpo
Heavy-duty, sturdy banding wheels with concentric circles and
rustproof metallic coating. Exceptional stability and smooth
rotation. Best Results.
SHL9
8-3/4” dia., 2-14" high
$56.00
SHL10
9-7/8” dia., 2-1/4" high
76.00
SH10
9-7/8” dia., 7-1/2" high
99.23
SH12
11-3/4” dia., 4-3/4” high
107.65
C.S.I. Turntables
Heavy-duty turntables made from
Formica-covered particleboard with a
heavy-duty bearing screwed to both
inside surfaces. They are extremely
stable because the base is just as wide
as the top. The 8" and 10" turntables
have a 4" bearing (bearings rated at 300 lb.) The 12", 14" and
16" turntables have 6" bearings (bearings rated at 500 lb.) Occasionally a drop or two of oil in the bearing may be needed. There
is some “play” in these wheels which will not cause your piece to
wobble. The turntable will turn true as long as you get the bulk
of the weight centered. If a turntable should fail within a year of
normal use, we will replace it at no charge. Do not submerse in
water.
•
Size
Capacity
Price
TT8
8"
200 lb.
$ 18.20
TT10
10"
200 lb.
22.14
TT12
12"
300 lb.
25.30
TT14
14"
800 lb.
28.70
TT16
16"
800 lb.
31.50
Sculpture Wheels
These well designed sculpture wheels
are available from Ceramic Supply.
All steel top with bearing drive make
these wheels ideal for both sculptors
and potters. Smaller model has 7-inch steel top and stands
4-inches tall. Larger model has 11 3/4” steel top and stands 5
1/8” tall. Both models come with a cast iron base and a no-skid
rubber bottom.
SCS01
7” steel top-4” tall
$21.54
SCS02
11 3/4” steel top-5 1/8” tall
$31.27
Ceramic SuppllyPrecision Sculpture Turntable/Stand
Professional potter’s wheel with adjustable shaft. Heavy-duty,
sturdy banding wheel with concentric circle plus precision ball
bearing drive for smooth rotation. Adjustable shaft allowing
potter or sculptor to adjust to a comfortable working height.
Imported by Ceramic Supply. All metal.
TURNSTNDEC
$124.20
Steel Banding Wheel, Sculpture
Turntable
This versatile wheel is a banding wheel as well
as a sturdy turning/modeling/sculpting stand.
The stand is formed from 1" diameter steel tubing, enameled green and is shaped and formed
for strength and rigidity. The height can be adjusted between 29" and 45". The 12" diameter
aluminum head turns with ease. In addition, it
has a set screw that can be tightened to keep
it from turning. (The screw set should not be
totally loosened as the wheelhead may slip out while raising it
to a higher position.)
TURNSTND
$295.00
AMACO12
AMACO8
AMACO10
AL5
PLWEL
Banding Wheels
Heavy-duty, all cast iron banding
wheels imported by Ceramic Supply. Sturdy, well crafted with ball
bearings for smooth rotation. Cast
iron provides excellent stability.
Both models stand 2” tall. Each wheel has the added feature of
callibration lines which allow for geometric and more accurate
work.
SCS04
8” x 2”
$43.13
SCS05
10” x 2”
$48.54
Economy Plastic Decorating Wheels
A simple, low plastic wheel rotating on ball bearings. Good for
decorating jobs. Serviceable, lasting for light duty.
PLWEL
8' dia, 2" high
$ 11.83
Medium-Duty Banding/Decorating Wheel
Aluminum Wheel 7"
The favorite well made, long lasting, yet economical wheel
rotates smoothly on ball bearings. Holes in the base allow it to
be secured to a table.
AL5
7" dia, 4½” high
$31.95
Aluminum/Iron Wheel – Amaco
This excellent, sturdy aluminum wheel rotates on a strong iron
base.
AMACO8
8” dia., 6” high
$139.00
AMACO10
10” dia., 6” high
175.00
AMACO12
12" dia., 6" high
190.00
81
Studio Furniture
Studio Furniture
Brent Ware Cart
Excellent for cooling ware after firing, for moving ware from place to place and for drying greenware.
Constructed from sturdy, 1" heavy-wall pipe. Cart is 24"Dx32"Wx77"H. Assembly required.
WC1
Ware Cart with cover
Ship wt. 80 lb.
$589.00
WCS
Shelf Kit: 12 wooden shelves, 32"x12" each
Ship wt. 55 lb.
109.00
9605
Wares Truck 54" with shelves
Ship wt. 108 lb.
635.75
WC1
NSTRUK
KSHCRT
BATMO
North Star Ware Truck
A fully adjustable, heavy-duty, 24"Dx36"Wx67"H ware truck. Shelves simply slide in and out of the
solid 14-guage steel frame. Full 6" diameter industrial swivel casters (two with parking brakes) are the
largest on any US ware truck. They carry up to 750 lbs. and roll easily over contaminated floors. Has
4 pairs of shelf brackets to give 5 shelf levels (first shelf goes directly on frame). Shelf brackets are
fully adjustable on 2" center. Holds up to 22 shelves with extra brackets available. Complete package
includes Shelf Truck, 4 pair brackets and 5 shelves.
NSTRUK
Ware Truck Pkg.
Ship Wt. (2) 50 lb. $649.00
NSTRUKS 5 shelves
Ship Wt. 50 lb.
125.00
NSTRUKB Brackets
Per pair
Ship Wt. 8 lb.
17.50
Brent Batmobile
This strong, sturdy, easily movable unit holds
approximately 60-90 bats, depending upon the
thickness and it has a top shelf for almost any
size bat or tools. 35"L x 13" W x 32" H.
BATMO
Ship wt. 60 lb.
$425.00
Brent Kiln Shelf Cart
Store up to 16 kiln shelves vertically and separately
between steel rods for less damage. 3 shelves for
stacking posts, cones, etc. Interchangeable with ware
cart shelves. Measures overall 35"L x 13" Wx47"H.
KSHCRT
Ship wt 63 lb.
$699.00
Stool
Made of heavy-gauge, tubular steel construction with a durable enamel finish. It has a 14" diameter
seat, stands 18" high and can be used with Brent Wheel Models A, B, C, CXC, 15 and 16. For a larger
choice of stools, see Index.
STOL
Ship wt. 11 lb.
$46.20
STOL
BUK3
9411
9412
9414
Clay Buckets
Sturdy, flexible rubber mixing buckets with strong handles. Easily cleaned: dry plaster, glaze, cement,
etc. break loose by flexing bucket. For use with liquids and solids; for carrying, mixing pouring and storing. A must for every home and workshop.
BUK3
3-gallon
$20.00
Clay Containers/Glaze Dipping Tank
Strong, durable Rubbermaid containers with lock lids, excellent for wet or dry clay storage and dipping
glaze. Will not leak or rust. Hand grips for easy lifting. Flat lids allow stacking for space-saving storage.
9411
10-gallon with lid.
Ship wt. 8 lb.
$40.00
9412
20-gallon with lid.
Ship wt. 8 lb.
$52.92
9414
32-gallon with lid
Ship wt. 8 lb.
$71.90
Replacement Lids
9412L
Replacement 20-gallon lid
15.70
9414L
Replacement 32-gallon lid
19.99
Dolly (use with Containers 9412 and 9414)
Easily twists on and off to provide mobility. Strong enough to easily move full containers (200 lb.)
9413
Can ship UPS
Ship wt. 8 lb.
$84.00
9413
Mobile, Heat-Proof Kiln Carts
Mobility and safety are the prime features of these kiln carts. These sturdy rugged carts are made with
16-gauge steel legs and 19-gauge trays. Each of the three trays is covered with non-asbestos millboard
to make the handling of projects safe and easy right from the kiln. 4" wheels. Dark Brown.
9500
30"D x 16"W x 32"H
Ship wt. 60 lb.
$395.00
9550
36"D x 24"W x 32"H
Ship wt. 80 lb.
496.004
9500/9550
Portable Art Cart
Steel cart with casters holds 3 all-purpose work/storage trays are made of a sturdy, high-impact plastic
that is practically unbreakable.
AR-1630
Art Cart w/3 Trays 16”x30”
$207.00
AR-2436
Art Cart w/3 Trays 24”x36”
$246.00
Art Cart
82
Studio Furniture
Portable Clay Storage Carts
Ideal for keeping clay moist and workable. Gives stored bulk clay the added feature of mobility. This heavyduty, all-steel constructed cart with removable plastic clay container and lid holds approximately 140 lbs. of clay.
Cabinet has hinged lid for easy access. The 4" ball-bearing wheels swivel for easy mobility. Dark Browns with
Antique Gold doors. Overall cabinets size 13"D x 17"W x 27"H.
9405
Can ship UPS
Ship wt. 31 lb.
$392.00
9405
Damp Proof Cabinet
Designed to keep your “work in progress” in moist, workable condition. Cabinet body is 19-gauge welded steel
with 16-gauge supports. Cabinet is “air sealed” by foam rubber-gasketed doors. Doors and all exterior walls are
doubled-walled with an inner layer of anodized sheet aluminum. Heavy-duty, bolt-on shelves have aluminum
surfaces and are supplied with water-retaining bats. Cabinet is Dark Brown with Antique Gold doors.
9100
18"D x 36"W x 84"H
Ship wt. 275 lb. $2186.00
Damp Proof Cabinet – Base Type
Offers the same construction features as model 9100. Furnished with two shelves, each having one highly
absorbed, bonded foam bat. Dark Brown with Antique Gold doors.
9150
18"D x 36"W x 31"H
Ship wt. 125 lb. $ 1074.00
9100
Drying Cabinet
Designed for drying an storing your greenware and protecting other special peices from damage. Constructed
of 13-gauge angled welded to 3/4” 16-gauge “expanded steel mesh.” Top and bottom pans are 16-gauge seal,
fully welded, and reinforced for extra heavy-duty service. The design provides full air circulation throughout
the cabinet. Four welded shelves are constructed with sheets of 1/8” perforated hardboard. Dark brown with
antique gold doors.
9200
18” x 36” x 84”H
Ship wt. 200 lbs.
$1756.00
Drying Cabinet - Base Type
Offers the same construction features as item 9200. This unit is furnished with 2 large angle-frame shelves
covered with 1/8” tempered pegboard. Dark brown with antique gold doors.
9250
18” x36” x 31”H
Ship wt. 85 lbs.
$1018.00
Combination Damp/Dry Work Unit
This unit is the small Damp Cabinet Model #9150 and the Small Drying Cabinet Model #9250 in one handy
unit. Approx. 72”W x 19”D x 31”H. Dark Brown/Antique Gold.
9300
Combination Damp/Dry Work Unit
Ship wt. 300 lb.
$2276.00
Debcor Ceramic Work Tables
This sturdy all-purpose work table is available in a variety of sizes and heights and is adjustable 31" to 35". Ideal
for ceramic workshops, studios and labs. Formica top resists liquids and cleans easily. Gray/White. Dimensions are approximate.
AC2448 Work Table 24"x48"$452.00
AC3048Work Table 30"x48"$477.00
AC2460 Work Table 24"x60"$486.00
AC3060Work Table 30”x60”$532.00
AC2472 Work Table 24”x72”$526.00
AC3072Work Table 30”x72”$574.00
AC2496 Work Table 24”x96”$836.00
AC3096Work Table 30”x 96”$915.00
9200
9300
Ceramic
Work Table
Wedging Board (Steel Frame)
624 sq. in. of wedging area. Heavy-duty steel, 20" x 24" x 2½” thick. Furnished with a fine steel cutting wire
and canvas “snap on” wedging cloth. Dark brown.
9615
Without plaster
Ship wt. 35 lb. $ 183.00
9615PL
With plaster
Ship wt. 95 lb. $ 240.79
Clay Bin with Wedging Board
Excellent for areas where storage is limited. Provides maximum convenience for the ceramist. Heavy-duty
steel cabinet with removable plastic clay container and lid. Front “tilt-out” bin opening provides easy access
and hold approximately 140 lbs. of clay. Cabinet: 16"D x 20"W x 30"H. Model #9615 Wedging Board bolts onto
cabinet. Dark Brown with Antique Gold.
9420
Without plaster
Ship wt. 35 lb. $ 617.00
9420PL
With plaster
Ship wt. 125lb.
789.11
9420
Wedging Stand with Wedging Board
Heavy-duty steel table for wedging or kneading clay before forming. Stand is 19"D x 20"W and adjusts from
30" to 36" in height. Model #9615 Wedging Board, 20" x 24" x 2½” thick, is included to form the top surface.
Specify with or without plaster. Furnished with canvas “snap-on” wedging cloth and fine, steel cutting wire with
adjustable hook to keep taut. Dark Brown.
9630
Without plaster
Ship wt. 50 lb. $ 443.00
9630PL
With plaster
Ship wt. 110 lb. $ 515.00
9630
83
Health & Safety
Health & Safety Equipment
Good Housekeeping for Your Health and Safety
We supply a wide range of raw materials and products to meet your needs, but we also pass along our concern for their proper use.
The earth materials (oxides and compounds) found in ceramics can prove hazardous to your health if not handled with care. Some of
these materials are toxic or irritating, and you should use proper procedures when handling. To prevent the inhalation of their dusts,
clean up by washing rather than sweeping, wear a respirator, and use a dust collection system. To prevent inhalation of kiln fumes,
do not work in the same room while firing, and vent your kiln. Wear gloves to prevent absorption through the skin; and to protect
against the heat of the kiln, wear non-asbestos, heat resistant gloves. Wear goggles to protect against flying particles while grinding,
and approved goggles to protect against rays while looking into the kiln. Do not eat or smoke while working. We have investigated
the products on the market which will help you to follow these good housekeeping methods and include some of them in this catalog.
Please contact us if you have any further questions. Take into account the information in this catalog, use good common sense, read
all labels carefully, and follow instructions. Enjoy your craft and stay healthy.
Disclaimer
These protective products are not intended to replace good housekeeping and proper ventilation, but only to be a supplement
to your careful handling of materials. These products must be used properly, and they must especially fit perfectly and be
kept clean themselves. The user must determine the usability of the product for his intended use and assume all risks and
liabilities connected therein. All of the equipment in this catalog has been carefully selected for its quality, usefulness, and
price. Proper care and use is essential for safety and maximum productivity. Please read all instructions carefully. Do not
leave unattended while in use, and in general: KEEP OUT OF REACH OF CHILDREN.
Respirators for Protection* NIOSH Approved/OSHA Accepted
These new Dual Cartridge, industrial-quality respirators offer greater comfort due to their new lightweight design. The elastomeric face pieces are soft on the face. Cradle 4-point headband suspension offers easy tension adjustment while inhalation and exhalation valves and low breathing resistance makes them less fatiguing to wear. Read all instructions, labels and limitations before using.
DUAL CARTRIDGE RESPIRATOR
protects against: PESTICIDES, PAINT SPRAY, LACQUER, ENAMEL MISTS, ORGANIC VAPORS, SOLVENTS, HYDROCARBONS, DUST AND MIST.
The respirator protects against dusts and mists typically found in ceramic workshops. Not for use against asbestos. Comes complete, ready to use, with: 2 organic vapor cartridges and 2 dust and mist filters
RES5501
Complete Respirator
$44.95
Replacement Filters and Cartridges
FIL7500
Vapor Cartridge
$18.35
FIL7531
Dust Cartridge
13.50
DUAL CARTRIDGE RESPIRATOR
protects against: HIGHLY TOXIC DUST (INCLUDING ASBESTOS), MISTS, FUMES (INCLUDING METAL)
AND RADON DAUGHTERS.
Respirator protects against the hazards listed as well as dusts (all types) commonly found in pottery and
ceramic workshops. Do not use against spray painting, pesticides or any other vapor.
RES550030MED
Mask Only
$21.00
Replacement Cartridges
FIL7580
Filter Cartridge
$13.50
Disposable Dust & Mist Mask
3M #8210* NIOSH/MSHA Approved
3M’s lightweight mask allows for clear vision
and easy breathing and speaking. Fit by
pressing metal band to nose and adjusting
elastic behind head. Protects against dusts
including, but not limited to iron ore, lead,
aluminum and free silica (dusts produced by sweeping, mixing of
clay or glazes and cleaning of molds, greenware, etc.) For more
information call (800) 247-3941.
RES23
Each
$ 1.95
Box of 20
30.00
*Your work area should be fully ventilated at all times as respirators are only an added protection. Keep in mind that dusts
and mists should be kept to a minimum. Do not use against air
contaminants which lack adequate warning properties such as
irritating action or odor. Not for use against carbon dioxide. Approved for respiratory protection against dusts and mists having
84
a timed-weighted average not less than 0.05 mg/cu meter or
2-million particles/cu foot. Be sure that respirator fits properly,
a beard, bushy sideburns or facials scars can cause leakage.
Do not use if you have a respiratory problem or have ever had a
reaction to isocyanates.
Vent-A-Kiln Safety Screen
For protection from hazardous work areas, the Vent-A-Kiln
Safety Screen is made from sturdy 1/2”
tubular steel frames and flame-resistant
canvas. The unit consists of three,
hinged, 2’ x 3’ panels, allowing the unit
to free-stand comfortably. Panels are
imprinted in bright safety yellow, “Caution - Kiln in Operation.” Screens can
be used around exposed machinery or kiln during firing or for a
variety of other uses.
VENT11-KS3 3-Panel Screen $140.00
VENT11-KS4 4-Panel Screen190.00
Health & Safety
Aprons
Heavy Duty Gloves and Mittens
Canvas Apron
Has large side pockets as well as a large
center pocket across
the bib. Measures
31” x 27 1/2”.
APRON
Ea.Ea./6
8.957.16
Polyethylene Disposable Aprons
Polyethylene disposable aprons are 20
microns thick for heavy duty use. Water
proof and solvent resistant. Die cut to
maintain uniform shape and pereformance.
3/4 length (24” x 42”)
PDAP
Price each
$.46
10 single aprons
2.10 100 single aprons 11.00 Kevlar Apron
100% Kevlar
Apron, bib style 36"x24"
APKEV
$36.10
22 oz. Kevlar
blend material,
fully wool lined.
Extra large cut and
sewn with 100%
Kevlar thread for
added strength.
Rated to 800F.
MITTENS
M14K 14" long
M23K 23" long
Pair
Pair
GLOVES
G14K 14" long
G23K 23" long
Pair
Pair
Flame Resistant Hood
This PBI/PFR Rayon
Hood insulates against
heat and cold. Its double-ply top and
single-ply bib provide added protection.
Comfortable, lightweight, soft, breathable with good stretch and recovery;
this hood maintains its properties after
$30.68washing and drying. UL-Certified to
meet or exceed NFPA standards.
55.28
NOMEX
$51.95
36.50
66.00
Leather Glove - Light duty
Lined, heat resistant & durable, one size.
LGLVLD
$7.00
Leather Glove - Medium duty
15" brown Kevlar thread, wool lined.
LGLVMD
$ 21.60
Rubber Gloves
Heat Protection - Gloves &
Mittens
Gloves – Light Duty
For protection against heat
when handling warm ware
while unstacking kiln. These
washable gloves have safety cuffs and are reversible from left to right
hand. One size fits all. Price is per pair.
TERYLT
Pair
$ 4.25
Gloves – Medium-Duty Protection
Grip N Hot Mill
These hard-working gloves will withstand
high temperatures and heavy labor. Grip
N gloves are flexible and strong with nitrile
pattern on both sides extending life wear
and improving grip when handling slippery
material. Knit Kevlar/cotton blend shell
with cotton/acrylic liner. One size fits all.
GRIP
Pair $ 14.63
Hoods
Protection against absorption through
the skin. Resists chemicals and snags.
Non-slip embossed fingers and palm.
Excellent manual dexterity. 12" length.
Indicate size. (S), (M) or (L).
Pair
Dozen pairs
RUBGLV-S $ 3.00
32.40
RUBGLV-M
3.50
37.80
RUBGLV-L
4.00
43.20
Latex Gloves - Disposable
Snug fitting latex gloves. Protects hands
from chemicals, paints and cleaners. Reversible. Indicate size. (S), (M) or (L).
Price 10
100
each
single gloves
DISGLV-S $.50
$1.809.00
DISGLV-M
.50
1.80 9.00
DISGLV-L
.50
1.80 9.00
Polyethylene Disposable
Gloves
Goggles
Goggles (against impact)
For protection against
impact from flying particles. Coverall soft vinyl molds to all faces comfortably an may be worn over glasses.
Frame is perforated for full ventilation.
Large, wide vision, one-piece lens.
IMGOG
$ 4.25
Sweeping Compound
Before sweeping, we suggest that you
first spread this oil-based compound
liberally over the floor in order to keep
the dust to a minimum. A little goes a
long way. It can be used over again
before it reaches its capacity to do a good
job.
SWEEP
25 lb.
$21.00
Clean Up Sponges
A must for cleaning all your workshop
surfaces. Long lasting, absorbent, soft and
inexpensive
Polyester Flat Round Sponge
PRD
4" x 2"
$ 2.99
Polyester Rectangular Sponge
PREC
6¾” x 4½” x 2¼”
2.55
Latex-free polyethylene disposable
gloves, both water and solvent tight.
These heavy duty gloves (1 1/4 mm
thick) will keep hands clean from paints,
glaze, chemicals, clay and other materials
PDGL
Price each
$ .41
85
Texture Tools
Texture Mats
Texturing Hammers
Set of 5. This hardwood set contains 5
hammers, each with 2 different designs.
SHAMMER Set of 5
$13.50
Hardwood Paddle
Basket
TMBASKET
TMDRAGON
TMFISH
TMROCK
TMWOOD
Dragon
Wood
Fish
Rock
Texture Mat, basket weave, 8”x12” 12.00
Texture Mat, dragon scale, 8”x12” 12.00
Texture Mat, fish scales, 8”x10” 12.00
Texture Mat, rocks, 8”x12”
12.00
Texture Mat, wood grain, 8”x12”
12.00
Dragon Scale Tool
A cool tool for decorating textures
on clay. Looks like fish, dragon or
snake scales. 7” long.
BDST$4.50
Dragon Eye Stamp
2 pcs in different sizes. Stamp on clay to make
animal eyes. Make a tiny clay ball and put on
the end of the stamp, then press on the main
piece to stick on the “eye ball”. Size: 0.5 &1cm
DRAGON-EYE$2.50
Plaster Texture Molds
Plaster forms can be successfully used to create imaginative and unique textures in clay.
Because of the absorbent nature of plaster,
clay can be depressed into the highly detailed
texture molds and lifted from the mold without
sticking. Minute details can be successfully transferred from
plaster to clay. The absorbent plaster forms help to assure an
even and timely draw of moisture from the clay body, limiting
cracks and sticking.
TX01
TX02
TX03
TX04
TX05
TX06
TX07
TX08
TX09
TX10
TX11
TX12
TX13
TX14
TX15
TX16
TX17
TX18
86
Ribbed Texture 8.5”x11”
17.00
Scale Texture 11”x11”
20.00
Frost Texture 11”x11”
20.00
Waved Texture 8.5”x11”
17.00
Geo Grid Texture 11”X11”
20.00
Funky Texture 12”x12”
22.00
Spot Texture 12”x12”
22.00
Tooled Leather Texture 12”x12”
22.00
Flower Power Texture 8.5”x11”
17.00
Mini Flagstone Texture 8.5”x11”
17.00
Mod Leaf Texture 12” x 12”26.00
Harlequin Texture 12” x 12”26.00
Hot Patterns Texture 12” x 12”26.00
Squares Texture 12” x 12”26.00
Tiger Texture 12” x 12”26.00
Leopard Texture 12” x 12”26.00
Pine Bar Texture 12” x 12”17.00
Dragonfly Texture 12” x 12”26.00
Wrapped w/Polypropylene Rope
ROPPADL
12” X 2” X ½” + rope
$9.25
Texturing Rolling Pins
Set of 4. Use for texturing clay. Roll over
clay to create interesting designs. These
6’ hardwood tools create flat or pointed
impressions.
SPIN
Set of 4
$10.00
Texturing Brushes
Designed for applying texture to
DG1
WG2
large areas of greenware. The stiff,
coarse bristles of the DG1 are for
use on hard, dry greenware. The WG2 bristles are not as stiff and
are better adapted for use on soft, damp greenware. The brush
heads are firmly fastened to smooth hardwood handles with solid
brass ferrules. 6-1/2” long.
DG1
For dry greenware
$3.69
WG2
For wet greenware
3.69
Feather Texture Brush
Used to apply textures to small hardto-get-at areas. The fine, stainless steel brush bristles are firmly
set in an aluminum handle to provide the right degree of stiffness
for applying texture. 5-1/2” long.
FTB
$2.79
Scratch Wire Brush
Make multiple fine lines with one
stroke. The fine, stainless steel brush
bristles are firmly set in an aluminum handle to provide the right
degree of stiffness for applying texture. Allows many special effects difficult to achieve with a single-point tool. 5-1/2” long.
SWB
Right angle tool
$3.79
MKM Texturing Paddles
The paddles are double sided so that there
is a different pattern on each side. Also
they are made of a light weight wood for
easy use. Soaked in a heated oil mixture
making them more durable. 13 x 4.25".
TPADL1
TPADL2
Square pattern
Diamond pattern
$12.95
12.95
Texture Tools & Tile Cutters
Clay Rollers
4” Texture Rollers
Roll out a continuous design on a slab of clay
with these new textured Clay Rollers and watch a
plain slab become an instant work of art! Create
tiles, vessels, or other works. The roller sleeves
are 4” wide and come in four designs: Koi Fish,
Vine/Leaf, Tribal, and Pre-Columbian. Texture sleeves and handle
are sold separately or available in two Class Packs. The roller sleeves
are interchangeable on the handle so you can save storage space as
well as money! Or purchase the class pack with four handles and four
sleeves for convenience.
4” Texture Rollers Sleeve Only
$4.75 each
4” Texture Rollers Sleeve & Handle
8.49 each
Texture Roller Handle
3.95 each
4” Texture Roller Class Pack with 4 Handles
31.00 each
4” Texture Roller Class Pack with 1 Handle
21.00 each
Koi Fish
Vine/Leaf
Tribal
2½” Texture Rollers
Roll out a continuous design on a slab of clay with
these new textured Clay Rollers and watch a plain
slab become an instant work of art! Create tiles, vessels, or other works. The roller sleeves are 2 1/2” wide
and come in four designs: Pre-Columbian, Circular,
Wave Dots, and Chain Link. Texture sleeves and
handle are sold separately or available in two Class Packs. The roller
sleeves are interchangeable on the handle so you can save storage
space as well as money! Or purchase the class pack with four handles
and four sleeves for convenience.
2½” Texture Rollers Sleeve Only
$4.75 each
2½” Texture Rollers Sleeve & Handle
8.49 each
Texture Roller Handle
3.95 each
4” Texture Roller Class Pack with 4 Handles
31.00 each
4” Texture Roller Class Pack with 1 Handle
21.00 each
Pre-Columbian
Pre-Columbian
Wave Dots
Chain Link
Circular
Stainless Steel & Brass Texture rollers
10 knurled brass head rollers with stainless steel handles. Texture clay
with crisp square, diamond, linear and wavy patterns.
All Texture Roller Patterns
TP10A
TP10B
TP10C
$11.00 each
TP10D
TP10E
TP10F
TP10GTP10H
TP10I
TP10J
Roller Tile Cutters
Cutting soft clay slabs into tiles, rectangles, or strips
is so easy with these Clay Tile Cutters. Two sizes are
available...2” and 4” wide. The 4” wide x 5/8” deep cutter allows you to make 4” cuts, 1/2” thick, in continuous
rows. The 2” wide cutter is also 4” wide but includes a
center blade that makes continuous double rows each
2” wide. The Clay Tile Cutters are made of a durable
plastic and are safe for all ages. After creating slabs
of soft clay to a thickness of 1/2”, roll the cutter into the 4” Tile Cutter
clay to the desired length. Roll again in a criss-cross
pattern to cut tiles or rectangles. The Clay Tile
Cutters and handles are interchangeable. Cutters
are available separately, with handle, and in a class
pack: one of each cutter and two handles.
4” Tile Cutter Sleeve with Handle
4” Tile Cutter Sleeve Only
4” Tile Cutter Class Pack
$8.49 each
4.75 each
15.95 each
TIPS:
1. Roll out slab of clay no thicker than 1/2”.
2. Spray cutter lightly with non-stick cooking oil spray
to avoid the possibility of clay sticking to it while rolling.
3. To create nice “rounded” edges while cutting, lay
thin plastic wrap on top of clay slab before cutting (no
cooking oil spray needed).
2½ Tile Cutter
2” Tile Cutter Sleeve with Handle 2” Tile Cutter Sleeve Only
4” Tile Cutter Class Pack
$8.49 each
4.75 each
15.95 each
Ceramic Supply All Stainless Tile Cutters
Engineered using the highest quality stainless steel, these tile cutters are manufactured to last.
Simple and easy to use. Generous size handle with spring action lever allows you to cut, then
pull up the tile away from the slab. The cutters are oversized by 12% to allow for clay shrinkage.
Rustproof and easy to clean.
TCUT2
TCUT4
TCUT6
TCUTRD6
TCUT8
2” square tile cutter (not shown)
$43.24
41/2” square tile cutter
47.50
6” square tile cutter51.86
6” round tile cutter51.84
8” square tile cutter54.00
87
Decorating Accessories & Clay Accessories
Wax and Latex Resist
The best resists available for slip or glaze
application. Use wax for decorating and
to protect foot rings and flanges during the
glazing process. Will burn out during firing. Use mask to block out design areas.
Pull off before firing.
High Grade All Purpose Wax
WAXP
pint
$ 5.25
WAXG
gallon
26.50
Wax Resist Pen
For fine-line wax decoration. Tinted
green for visibility, the Wax Pen gives
a 1/16" wide continuous line. Lay out
your design in pencil on bisqueware and
draw over the design with the wax pen.
If clogging occurs due to cool wax in the
tip, simply dip the pen point in warm water.
NONTOXIC
WAXPEN
$9.91
Latex Resist & Peel (liquid)
DO NOT FIRE
Used as a resist in decorating. Used also
for Mold Making; see Index.
660P
pint
$ 9.80
660G
gallon
58.95
Best Grade Latex Resist & Peel
MAC302 Mayco 2 oz. sqeez. $2.85
SY548 Duncan 2 oz.
2.35
The Precision
Decorator
Allows drawing
intricate designs
with underglaze,
slip, wax, non-fired
paints, etc. Includes
4 sizes of interchangeable tips &
tip caps, a 1oz. &
2oz. bottle, 2 close caps, and cleaning
stem. Fits on many 1oz. & 2oz. bottles of
prepared glazes and acrylics.
PD
Precision Decorator
$7.50
Detailer Tips and Bottles
Plastic squeeze bottles ideal for wiriting and
detailing. Ideal for use with Mayco Stoke &
Coat WonderGlaze. Bottles comes empty,
fill with your favorite color. Reusable.
Plastic bottle and tip.
DT001
Detailer Tip
$ 1.75
Plastic bottle with metal tips.
Contains 2 1-oz. bottles, 1 metal writer
tip, 1 plastic tip and flip cap.
DT003
Medium Writer Tip
3.25
88
Underglaze
Applicator
Create an unlimited array of designs utilizing
line and dot patterns on
ceramic pieces with underglazes and this applicator. The 18 gauge needle allows you to
make fine lines or tiny dots, if desired. May
also be used with certain glazes.
BOTTLE
18 ga. 2 oz. bottle
$4.69
BOTTLE16 16 ga. 2 oz. bottle $4.69
Syringe-Type
Applicator
Snip off the
end of the new
syringe-type applicator to adjust
for thickness of
lines or for consistency of the liquid being
extruded.
STA
Syringe-Type Applicator $1.99
Slip Trailer
Set
Set includes
rubber slip
trailer bulb and
4 machined
stainless steel
tips. Excellent
craftsmanship for precision work.
SLIPSET
4 oz. bottle
$49.95
Slip Trailer Bottle
Used to flow slips, glazes and
engobes onto ceramic pieces
in raised, decorative designs.
Squeeze polyethylene bottle
complete with round and ribbon spouts with caps.
STB 4 oz. bottle $2.99
Paint-Safe Drying Table
Paint one side of
your project, lay it on
the Paint-Safe drying
table and keep right
on painting! Gently rounded drying tips
won’t stick to painted surface, therefore
allowing air to circulate from all sides to
dry your project quickly and safely. For
any-size flat or 3-dimensional objects.
Plastic. Great for drying pieces when
glaze dipping.
PSDT
$5.95
Sponge On A Stick
For a different
approach, try our
Sponge-On-A
Stick! These circular sponges come
in three different
diameters and are attached to a stick for
easy application and usage! Simply load
the sponge and pounce the color on!
SPG11
SPG12
SPG13
SPG14
1/2” Round
3/4” Round
1-1/4” Round
1-3/4” Round
Sponge Fun Pop Up Sponges
Sponge Fun! These pop-up dehydrated
sponges come in 7 different designs. Easy
to use! Drop in water and watch them expand. Re-usable - glaze washes right out
after use. Ideal for beginners and children.
Pre-cut shapes.
SPG05 Everyday Assortment $ 10.45
SPG06 Holiday Assortment
10.45
SPG07 Letters and Numbers 13.60
Clay Tool
The Ultimate Edger
A new multi-use tool that allows you to
create the perfect edge every
time. Use for
creating double
edge on pot bottom, rounding out squared edge on lip of
pot, create raised design, single edge on
pot bottom, and rounded edge on large
pot. Available in two sizes. All stainless
steel.
UE
Ultimate Edger
$12.28
UEXL Ultimate Edger X-Large 13.99
$ .70
.85
1.25
1.50
Designed for fluting leather hard clay.
This standard steel tool will create a
trough or scalloped look.
CLAYTOOL 5” long
$13.00
Bevel Cutter
Bevel Cutter, 45 and
60 degree
BEVEL
$ 8.75
Clay Accessories
Hand Extruders
Ceramic Supply
These clay extrusion guns were developed for heavy duty use. Excellent for production potters who extrude small shapes and are ideal for
the classroom. The Large Clay Gun has a 15” x 2” aluminum barrel
which holds over 3 pounds of clay. The Medium Clay Gun has a 9” x 2”
aluminum barrel which holds approximately 1 1/2 lbs. of clay. Both guns
have powerful mechanical gears which deliver a 15:1 ratio of power for
easy use. Comes with 4 dies, 3 cut and 1 blank (see die shapes below).
Additional die sets are also available which can be used in both guns.
LCEG1
MCEG1
DIESET4
DIESET6
DIESET9
Large Clay Extrusion Gun
Medium Clay Extrusion Gun
Replacement Die Set (3 cut & 1 blank)
6 Cut Dies & 1 Blank
8 Cut Dies & 1 Blank
36.72
25.93
8.00
12.95
19.50
DIESET6
LCEG1
MCEG1
Ceramic Supply
$9.29
DRAPE1
DRAPE2
DRAPE3 DRAPE4 DRAPE5
DRAPE6
Drape Molds
Kemper
K45D
Kemper clay gun, 19 1/2”-discs
19 Replacement discs
$15.99
3.29
Hump, Slump & Sprig Molds
Plaster forms and tools can be successfully used to create imaginative
and unique clay pieces. Because of the absorbent nature of plaster, clay
can be depressed into highly detailed sprig molds and lifted from the mold
without sticking. Minute details can be successfully transferred from plaster to clay. The absorbent plaster forms help to assure an even and timely
draw of moisture from the clay body, limiting cracks and sticking. Convex
plaster forms are known as Hump Molds, while concave plaster forms are
known as Slump Molds. Plaster forms help even the first time student
create clay hand building projects with fantastic results.
HUMP-HDM5SLUMP-SP01
SPRIG-SG04
DRAPE7
This fine set of drape molds is widely used in schools, institutions, the
military, & they are particularly useful in the occupational therapy departments of hospitals. Available in seven shapes and sizes, these molds can
be used to make an unlimited number of forms including bowls, patterns,
planters, vases, masks, dishes, etc. Just drape a slab of clay over the
top of the mold and let your originality do the rest.
The Kemper Clay gun has 19 ½” discs that can be used for
almost limitless number of decorative effects such as hair,
grass, logs, flower stamens, ropes, bricks, etc. Sturdy diecast zinc alloy. Approximately 4' long.
HDM1
HDM2
HDM3
HDM4
HDM5
HDM6
HDM7
HP01
HP02
HP03
HP04
HP05
HP08
HS01
HS02
HS03
HS04
HS05
HS06
SG01
Press-Shells Sprig
17.00
Press-Snow Sprig
17.00
Press-Sunflower Sprig
14.00
Press-Ivy Sprig
17.00
Press-Magnolia/Bird/Butterfly Sprig
17.00
Press-Dragonfly & Lizard Sprig
17.00
Press-Medallion Sprig
17.00
Press-Scrolls Sprig
17.00
Press-Poinsettia Sprig 1/2” – 5”
17.00
Press-Cross Sprig
17.00
Press-Oriental Sprig
17.00
Press-Cat Sprig
14.00
Press-Cute Flower Sprig
17.00
Press-Dog Sprig
17.00
Square Slump 8”x8”
45.00
Square Slump 10”x10”55.00
Round Slump 9” 55.00
Oval Platter Slump 13”x17”x1”50.00
Round Slump 4 1/4” Diameter 25.00
DIESET9
(1 blank also included)
CG19Small Extruder w/19 discs
K45
K45D
SG02
SG03
SG04
SG05
SG06
SG07
SG08
SG09
SG10
SG11
SG12
SG13
SG14
SG15
SP01
SP02
SP03
SP04
SP05
Rectangle Hump 7”L x 5-3/8” x 1-7/8”H
25.00
Rectangle Hump 9”Lx 4-3/8”W x 1.5”H
25.00
Rectangle Hump 10.5”L x 7.5”W x 1”H
25.00
Pear Hump 7.25”L x 4.25”W x 1.5”H
25.00
Egg Shaped Hump 7.25” x 5.5”W x 3”H
25.00
Pear Shaped Hump 10.25” x 7”W x 2.25”H
25.00
Oblong Hump 12.45”L x 4.75”W x 2”H
25.00
Square Hump 8”x8”
25.00
Square Hump 10”x10”
35.00
Round Hump 9”Dia x 3.75”H
40.00
Oval Hump 9”L x 7.25”W x 4”H
25.00
Oval Hump 13”L x 10.25”W x 5”H
50.00
Oval Platter Hump 13”x17”x1”
50.00
Square Hump & Slump Combo (2 molds)
30.00
Rectangle Hump & Slump Combo (2 molds)
60.00
Small Plate Hump & Slump Combo 11”dia (2 molds) 45.00
Large Plate Hump & Slump Combo 14.5”dia (2 molds)55.00
Oval Hump & Slump Combo 6”x4.5” (2 molds)
35.00
Rounded Rectangle Hump &
Slump Combo 7.5”x5.5” (2 molds)
40.00
Press-Three Fish Sprig
17.00
Size
DRAPE1
DRAPE2
DRAPE3
DRAPE4
DRAPE5
DRAPE6
DRAPE7
7 1/2” x 5 5/8” x 1 7/8”
9-3/8” x 4-1/2” x 1-1/2”
11” x 7-5/8” x 1”
7-1/2” x 4-3/4” x 1-1/2”
7-1/2” x 5-3/4” x 3”
11” x 7” x 2-1/4”
12-1/4” x 5-1/4” x 2-1/4”
Lbs.
1
2
2
1½ ½
2¼ 2
Price
$26.95
26.95
26.95
26.95
26.95
26.95
26.95
Stamps
These stamps are casted solid using blue-tinted ceramic earthenware clay. They are beautifully crafted,
highly detailed and easy to use. They are sold in sets
of 3 by theme (3 different crosses, 3 different flowers, etc.) and coordinated with sprig molds. These
stamps can be used to embellish moist clay for hand building or greenware prior to the leather hard stage.
XX10
XX11
XX12
XX13
XX14
XX15
XX16
XX17
Floral Stamps – 3 Ceramic Stamps 2” x 1.5”
24.00
Cross Stamps – 3 Ceramic Stamps 2” x 1.5”
24.00
Oriental Stamps – 3 Ceramic Stamps 2” x 1.5”
24.00
Cat Stamps – 3 Ceramic Stamps 2” x 1.5”
24.00
Cute Flower Stamps – 3 Ceramic Stamps 2” x 1.5” 24.00
Dog Stamps – 3 Ceramic Stamps 2” x 1.5”
24.00
Celtic Stamps24.00
Woodland Stamps
24.00
Press Molds & Stamps
PMOCEAN
PMVEG
PMGARDEN
STAMPL14
STAMPL38
STAMPL58
STAMPN14
STAMPN38
STAMPN58
Press Mold - Ocean Plants & Animals24.00
Press Mold - Vegetables
17.50
Press Mold Garden Life Set, 5 pc., 18.75
frog, snail, ladybug, butterfly, turtle
Letter Stamps, 1/4” high, 26 per set 3.75
Letter Stamps, 26 per set, 3/8” high, 8.13
plastic, snap together
Letter Stamps, 26 per set, 5/8” high, 12.50
plastic, snap together
Number Stamps, 1/4”high, 10 per set 1.88
Number Stamps, set of 10, 3/8” high, 3.75
plastic, snap together
Number Stamps, set of 10, 5/8” high, 5.00
plastic, snap together
89
Clay Accessories
Rolling Pins & Accessories
If you do not own a slab roller, your rolling pin will do an excellent job of rolling out clay slabs. A rolling pin used with the clay
thickness strips can make your slabs level and smooth.
Solid Maple Rolling Pins
Total Length 18”
24”
30”
Roller
LxW
10-1/2”x 3”
16”x 3”
22”x 3”
$8.95 Yd.
Tempered spring steel for smoothing, scraping, texture, applying slips and colored clays,
etc. Specify width.
Price
26.00
31.00
37.000
METSP8
METSP12
METSP14
Rolling Pins with Bearings
Hardwood, guaranteed against defects, unbreakable steel
center rod, 3/8” dia., special bearings, no lubrication required.
Total Roller
Model Length LxW
Price
ROLB9 17 1/2”
10”x 2-1/4”
17.10
ROLB10 18”
10-1/2”x 2-3/8” 14.40
ROLB12 23”
12”x 3”
59.65
ROLB15S 25”
15”x 3”
55.00
ROLB18S 28”
18”x 3”
60.00
ROLB15L 25”
15”x 3-1/2”
55.00
ROLB18L 28”
18”x 3-1/2”
64.40
8”
12”
14”
$14.95
18.40
19.65
Paddles & Shapers
Light weight, strong, hardwood paddle
PADL
12” x 4” x ½”
$8.50
Rollers, Hardwood
(slightly barrel shaped) w/steel frame.
PONYR
4” x” x 2” x 15/8”
$10.00
FCR
MINIROL
3½” Flower Clay Roller
1.2” x 1”
3.29
10.65
Mallet, Hardwood
MALET
3” x 4¼ ” w/10” handle 11.95
Chinese Clay Mallet
Thin Slab Roller
This roller will roll out very thin (1/16”)
slabs of even thickness. Due to tapered
design from center to the ends, this roller
will stretch the clay from the center of the
slabs out to the edges to make slabs to 20” square.
TROL
$10.80
Clay Thickness Strips
For rolling uniform thickness slabs of clay.
Made from kiln dried poplar wood, 24” L.
Contains four pairs strips.
STRIP8
1/8”, ¼”, 3/8”, and ½” thick
$11.63
Slightly curved face for spreading clay lumps
flat, decorating & shaping. Hard maple
w/birch handle.
CMALET
5” x 27/8” w/5” handle
$12.75
Tapered Wood Spout
A solid maple, sanded smooth, mineral oil
hand-rubbed finish, round, tapered, wood
dual spout. Used by ceramists to make
spouts, feet, designs and appendages.
SPOUT 8”x1-3/4”x3/8” tapered ends $10.25
SPOUT-LG
16.30
Pattern Cutter Sets
MKM Decorating Disks
MKM Decorating Disk is a set of 2 (one even
and the other odd), sturdy, mylar, transparent
sheets. Use the concentric circles to quickly
center your piece. Colored radical lines indicate even divisions (2,4,6,8,10) on one sheet
and odd divisions (3,5,7,9) on the other sheet.
Along the radical lines are holes that allow you
to mark through the disk to the soft, leather-hard
or bisqued clay below. Simply put a disk on top
(or underneath) of your pot, center it and mark
through the holes to your clay. Make square, rectangular or other shaped plates quickly and with
ease. Use it to guide your patterns with glaze
or slip decoration. Line up handles and spouts
perfectly every time. Alter the rim of a bowl in
3rds, 4ths, etc. Mark your bats or wheelheads
in 3rds, 4ths, 5ths, etc. accurately and quickly,
without a template or protractor.
Canvas Premium Cotton
60” wide, durable, for rolling out slabs.
CNV10
#10 Extra Heavy
Metal Spatulas
Sturdy, select, kiln-dried, & satin finished with linseed oil.
Model ROLM10 ROLM16 ROLM22 Canvas & Spatulas
Leaf Cutter Set
Four sizes of leaf-shaped cutters used like cookie cutters
on rolled-out clay to make leaf-like clay forms. Made of
rust-free material, they have plungers designed to eject
the clay cut-outs while resisting accidental deformation.
Instructions included.
K46
Sizes from 1” to 2” long
$8.99
Rose Cutter Set
Five round “cookie cutters” are used on rolled-out clay to
make round pads. The pads are handformed to resemble
rose and other flower petals. Made from rust-free materials,
they have ejection plungers designed to resist accidental
deformation. Instructions included. Sizes range from ½”
to 1½” in dia.
K50
$8.99
Saral Paper - Wax Free
Specialized transfer paper works like carbon paper allowing you to
transfer your design from a sketch, pattern, template or free hand to any
surface. Saral paper ia wax free so it gives you the advantage of erasing
like pencil with no smear or smudge. It is highly economical because
it can be used over and over again. SARAL red or graphite colors are
Clay Carbon Transfer Paper ideal for ceramics. Tracing lines will burn out and disappear in the firing
Clay carbon sheets
process. AP non-toxic.
DD15
DD4
Set of 2 for plates & bowls, 15” Set of 2 for mugs, cups, bowl interiors 4”
Each Ea./12Ea./24
CLCARB
9” x 12” .35
.27
.24
90
29.95
18.95
SARAL-RD 12 ft. roll-red
SARAL-BK 12 ft. roll-graphite
12.00
12.00
Clay Accessories & Tools
Spring Plunger Pattern Cutters
Modeling & Carving Tools
TP23X
TP405 & TP407
$7.05 Each
$7.71 Each
8.99 Double Ball Stylus Tools
9.19 TP457, TP457A, TP457B, TP457C
$7.05 Each
Cutters equipped with a spring-return plunger for ejecting clay
cut-outs.
Four-Shape Pattern Cutter Sets:
PCAR, PCAF, PCAT, PCAH; 5/8” wide.
PCBR, PCBF, PCBT, PCBH; ¾” wide.
PPC1R, PC1F, PC1T, PC1H; ½” wide.
PPC2R, PC2F, PC2T, PC2H; 7/16” wide.
PPC3R, PC3F, PC3T, PC3H; 3/8” wide.
PPC4R, PC4F, PC4T, PC4H; 5/16” wide.
PPC5R, PC5F, PC5T, PC5H; 3/16” wide.
$11.49
11.49
9.49
9.49
9.79
8.99
8.99
PCSA
PCSB
PCS1
PCS2
PCS3
PCS4
PCS5
Forget-Me-Not Pattern Cutter Sets:
PC1F, PCAF, PCBF
PCSFL Large
PC2F, PC3F, PC4F, PC5F
PCSFS Small
Tear Drop Pattern Cutter Sets:
PC1T, PCAT, PCBT
PCSTL Large
PC2T, PC3T, PC4T, PC5T
PCSTS Small
$8.99
8.999
Lilac Shaped Pattern Cutter:
5/16”, ½”, 5/8”, & ¾” in width. PCSL
9.69
Cookie Cutters
Perfect for polymer and regular clay. Made of rust resistant tin,
available in a range of shapes, including NUMBERS and LETTERS. Packed in convenient storage tins for easy storage. A
wonderful classroom program. Make ornaments, wall plaques,
shape tiles, even add-ons to other clay projects.
CUT3607
Set of 5 Round Cutters
$31.36
Stainless Steel w/handle, 1.5” to 3”
CUT3680
Set of 5 Hearts
1.25” 2”, 2.5”, 3”, 3.5”
$5.94
CUT3685
Set of 8 Mini Cutters
1⁄2” Bone, Heart, Triangle,
Mushroom, Diamond,
Moon, Arrow, Square
$5.94
CUT3686
Set of 5 Stars
1.25”, 1.5”, 2”, 2.5”, 3”
$5.94
Double Wire Stainless Tools
TP375, TP376, TP377
$7.71 Each
Aluminum Handle Trim Tool
T202X
$4.80 Each
CUT3688
Set of 9 – 1” Numbers
$7.50
CUT3689
Set of 26 – 1” Letters (Alpha)
$14.38
CUT3688
CUT3689
Heavy Duty Turning Tools
T410A - $9.60 Each
T412A - 10.80 Each Euclid Stainless Steel Tools
Modeling & Carving Tools
TP351, TP354, TP355, TP356
$7.05 Each
91
Tools
MudTools by Michael Sherrill
Polymer Ribs
These color coded ribs
are made from a flexible material that is
considered the “stainless teel” of plastics.
Unlike rubber, this material will not develop
burrs or cracks. In fact,
these ribs will burnish
themselves as you use
them, so, the more you
use them the nicer they
become. Available in 5
different shapes/sizes in
4 different hardnesses.
Red is very soft, Yellow
is flex-soft, Light green
is medium-flex and Dark
blue is firm-flex. You get
to choose the shape and
hardness that suits your
clay and working style.
Rib Shape
Rib No.
Size
Width x Height
Red
Very Soft
Yellow
Soft
Green
Medium
0
2.75” x 1.5”
RIB-RD0
RIB-YL0
RIB-GR0
RIB-BL0
7.00 ea.
1
3.5” x 1.75”
RIB-RD1
RIB-YL1
RIB-GR1
RIB-BL1
7.00 ea.
2
3.875” x 2.25”
RIB-RD2
RIB-YL2
RIB-GR2
RIB-BL2
7.00 ea.
3
5” x 2”
RIB-RD3
RIB-YL3
RIB-GR3
RIB-BL3
7.00 ea.
4
4.25” x 2”
RIB-RD4
RIB-YL4
RIB-GR4
RIB-BL4
7.00 ea.
5
4.5” x 2”
RIB-RD5
RIB-YL5
RIB-GR5
RIB-BL5
7.00 ea.
Small
Bowl
4.63” x 2.75”
SBRE
SBRY
SBRG
SBRB
8.00 ea.
Large
Bowl
6.38” x 3.88”
---
LBRY
LBRG
---
14.00 ea.
Small
7.5” x 1.69”
---
---
SMPR
---
14.00 ea.
Large
Platter
11.38” x 1.75”
---
---
LPR
---
16.00 ea.
Platter
Blue
Firm
Price
Flexible Stainless Steel Ribs
Made from the highest quality stainless steel, these scrapers are flexible and bendable.
Rib Shape
92
Rib No.
Size
Width x Height
Smooth
10-Tooth
12-Tooth
18-Tooth
24-Tooth
0
2.75” x 1.38”
SS-0
---
---
---
---
7.00 ea.
1
3.5” x 1.75”
SS-1
---
---
---
---
7.00 ea.
2
3.75” x 2.5”
SS-2
---
---
---
---
7.00 ea.
4
4.25” x 2”
SS-4
---
---
---
---
7.00 ea.
5
4 13” x 2”
SS-5
---
---
---
---
7.00 ea.
7
5.50” x 2.13”
SS-7
---
---
---
---
10.00 ea.
8
4.75” x 3”
SS-8
---
---
---
---
14.00 ea.
SSL
6” x 1.38”
SS-L
---
SS-L12
SS-L18
SS-L24
7.00 ea.
SSXL
7.5” x 1.75”
SS-XL
SS-XL10
---
---
---
14.00 ea.
SSP
3.25” x 1.75”
SS-P
---
---
SS-P18
SS-P24
7.00 ea.
Price
Tools
The Mudcutter
Made of stainless
steel with a surgical stainless steel
wire under tension, The Mudcutter has been designed to go around a
4 inch pug, or an extrusion. The design
lends itself to the slicing and cutting of
hand building, or at the wheel it fits well
in the hand. This is the best all around
wire tool for six inch pugged clay, cutting
spouts, and cutting off extusions. It also
works great as a faceting tool. This is one
tool that once you use it, you will ask yourself ‘how did I work without it?’ Replacement wires are available MUDCUTTER
$ 35.00
Carving Bow
Our new carving
bow for cutting,
texturing
and
faceting all clay
surfaces. Its compact design gets you
closer to your work and is available with
a twisted or straight wire. Replacement
wires are available in either straight or
curly designs. The Carving Bow is slightly
smaller than the Mudcutter, thus the wires
are specific for each tool. CARVINGBOW$35.00
Replacement Wires
The Shredder
A versatile tool for clay and
plaster, grater style cutting
edges quickly plane down the
surface. Specially designed
to avoid constant clogging.
Handle is easy and comfortable.
SHRED$8.00
Replacement Blades Pk/2
SHREDR6.00
The Conical Shredder
The Conical
Shredder is
indispensable for longer strokes, good for texturing
and working on rounded surfaces. It has
a comfortable ergonomic grip, doesn’t
trap the waste clay in the tool and
doesn’t frustrate the user. Also leaves a
handsome textured surface in the clay.
SHREDC
$10.00
The Flat Shredder
Flat Shredder provides a flat
plane which is a great tool for shaping
and carving leather hard clay. It has a
comfortable ergonomic grip, doesn’t trap
the waste clay in the tool and doesn’t
frustrate the user. Also leaves a handsome textured surface in the clay.
SHREDF
$10.00
All replacement wires come 3 per pack.
Straight Wires:
MUDSTRAIGHT$9.00/pk.
Dragtool
CARVSTRAIGHT9.00/pk.
When
Curly Wires:
Michael
MUDCURLY$15.00/pk.
visited
CARVCURLY15.00/pk.
potters in Japan he observed that it was
common for them to pull, rather than
push, their carving tools through the clay.
This motion allowed for less friction and
The Hax Tool
a fluid cut. Made of high carbon steel and
With its
tempered to be very hard, the Dragtool
serrated
is designed to grace the hand and make
edge,
a fluted mark in the clay. One end cuts a
the HAX is Michael’s version of a hacksaw
wider flute than the other. Whether you
blade for scoring and manicuring. It is dedraw a long fluted line or chip away at
signed specifically for clay, especially for
the clay, the texture looks beautiful under
fine particle clay like porcelain. The HAX
a celadon or any glaze that breaks on the
tool is made of flexible, bendable stainless
surface. Varies in color.
steel and it can be bent for rounded surDRAGTOOL
$20.00
faces and hard to reach areas.
HAX
$10.00/pk. of 2
The Mudshark
The Mud Sponge
Shaped like the
traditional kidney rib,
this synthetic sponge
is the best tough and
consistent sponge available to potters
today.
MTSPONGE 3 1/2” x 1 3/4” $5.00 ea.
The
Mudshark is designed to combine the
two tools most commonly used when
throwing pots: a needle tool to trim the
rim at the top and a knife to cut away the
waste at the base. Like a real shark, the
Mudshark needle is sharp and will bite,
so we designed it to fold away when you
don’t need it. Safety first. 9.5” W x .85” H
MUDSHARK $8.00
The Mudwires
Mudwire is ergonomically designed for
a good grip without having to wrap the
wire around your fingers. The high grade
stainless steel braided cable is more
resistant to kinking than traditional cut-off
wires.
The Green Mudwire
is suited for a standard
wheel-head and makes
a clean cut- you’ll use
it every day. Approximately 15”
MUDWIRE
$7.00
The Heavy Duty Black
Mudwire is made with a
heavier cable appropriate to use under heavier/
larger pots and platters.
Good for cutting big slabs off a block of
clay. Approximately 19.5”
MUDWIREB
$8.00
Pink Curly Mudwire is
more than just a cut-off
tool – when you pull
it through the clay it
leaves a beautiful pattern. Use it for faceting
and you get a surface that looks beautiful on wood-fired or salt-fired pots and
under glazes that break (like celadon or
temeku). This wire comes to you compressed and you pull it out to get the curl
that suits you. Approximately 15”
MUDWIREP
$8.00
The Bump Tool
Have you ever made a hollow form and
then tried to bump
out the clay, only
to find that you
just can’t get your arm or your knuckle
to the sweet spot? You need The Bump!
Designed to extend the potter’s reach up
to 18 inches when working in a hollow
form, it gives the leverage you need to
bump out the clay. The aluminum rod is
stiff but can be altered to suit your individual need for throwing or sculpting clay.
We can ship it to you straight and you
customize it, or with a preset S curve.
The sponge end is a dense absorbable
material with a hard center. BUMPTOOL $24.00
The Baby Bump Tool
Made from the
same materials
as the Bump Tool, the Baby Bump is designed to extend the potter’s or sculptor’s
reach up to 13 inches and give you the
leverage you need to move clay where
your hand can’t.
BABYBUMP
$18.00
93
Tools
Regular Wiggle
These new wire tools feature the comfort
grip handles which make it easier to
simply slip your fingers thru the loops and
cut under your pots or facet your clay. No
more wrangling a wire that is simply too
long for small pots or too short for wide
pots! Available in several different sizes,
these ergonomic wire tools will become
a staple in your tool kit! Handmade in
Kentucky, USA.
9WWR
14WWR
9WWW
14WWW
9” Wiggle Wire
$6.95
14” Wiggle Wire6.95
9” Wide Wiggle Wire6.95
14” Wide Wiggle Wire6.95
14BWW
14GAPTH
Ergo Thin Wires
These wire
toosl feature
an ultra-thin
stainless
steel wire that
removes less
clay under
your pots.
3.5THIN 3 ½” Ergo Thin Wire $5.50
7THIN
7” Ergo Thin Wire5.75
13THIN 13” Ergo Thin Wire5.75
Ergo Max Wires
These wire
tools feature
a standard
thickness
stainless steel
wire.
7MAX
13MAX
22MAX
7” Ergo Max Wire
$5.75
13” Ergo Max Wire5.75
22” Ergo Max Wire5.75
Ergo Phat Wires
A SUPERTHICK
stainless
steel cut-off
wire for undercutting
large platters and leather-hard wares.
18.5PHAT 18 ½” Ergo Phat Wire$5.75
Wiggle Wires
Wiggle Wire Tools
feature the same
thin, firm steel wire
as the Ergo Thin
Wires. When used
to cut pots off the wheel, a special ribbed
pattern is created in the clay.
94
Wide Wiggle
Great White Roller
Choose
between
straight or
wiggle wire.
This tool is
so wonderful. It is
10 inches
long and will facet a slab or block of clay
up to 8” wide! The white roller aides in
regulating the depth of your cuts and is
fully adjustable up or down for deeper
or shallower cuts. Wire tension is fully
adjustable with knob on the side!
Made of fine quality oiled hardwood,
stainless steel wire and brass components. Handmade in Kentucky, USA.
GWSTR Straight Wire Roller $ 45.00
GWWIG Wiggle Wire Roller45.00
Handy Facet Tools
14GAPTH 14” Gap Tooth Wire $6.95
14BWW
14” Baby Wiggle Wire6.95
Slab Bevel Tool
This is the
ultimate
handbuilding tool. It is
basically 3
tools in one.
You get 3
different
angles with which you can bevel your
slabs for construction. Place the tool flat
on the table up against your slab and
draw it along the slab to cut a perfect
angle for construction. you get 30, 60,
or 45 degree cuts. The taut wire never
snags or causes drag or deformation on
your slab. You can quickly and easily
tighten or replace the wire too.
SLBEV Inner Eye Slab Bevel $21.00
Sling Shot Tool
Choose between
straight or wiggle
wire! $19.50 each
This tool is very versatile. It is has a beveled wooden tool on
one end and a faceting tool on the other!.
Wire tension is fully
adjustable with knob
on the side. Made
of fine quality oiled hardwood, stainless
steel wire and brass components. Handmade in Kentucky, USA.
SSSTR
SSWIG
Straight Sling Shot$19.50
Wiggle Sling Shot19.50
Choose
between
wiggle or
straight
wire.
Handmade in Kentucky, USA these
beautiful functional tools offer just the
right amount of tension to facet your
moist or leather hard clay. You can adjust
the tension on the side of the tool as well.
Quick change replacement wire available
as well.
HFSTR Straight Wire Facet $20.00
HFWIG Wiggle Wire Facet20.00
Replacement Wires
Replacement wires are available for Slab
Bevel and all faceting tools.
Foot Fetish Rib
Use it to profile the
foot of your pot or
create a galley on a
rim! Top and bottom
edges are beveled
for use as shaping
ribs too. You get 2 different designs, one
rounded, one triangular. Handmade in
KY of fine hardwood Red Oak.
FTFETRB Foot Fetish Rib
$ 8.25
Tools
New Kemper PRO-LINE Tools
Kemper PRO-LINE tools are crafted from select hardwood handles. The steel loops and blades are made from “knife quality” high carbon steel that
has been heat treated and quenched in oil to give the blades maximum hardness and durability. Because high carbon steel takes and holds a sharper
and longer lasting edge than stainless, these tools last much longer even when used with highly groged clays and plaster. All of Kemper’s PRO-LINE
tools are retained by brass ferrules and firmly set with industrial adhesives to protect against water and prevent them from coming loose. In addition
each handle is immersed in an oil resin bath to seal the handle against water damage and prolong the life of the tools.
Since the cutting loops are made from high carbon steel which can rust, we recommend that the tools be kept clean and dry when not in use. Periodically applying a light coat of oil to the both the blade and handle will prolong the life of the tools.
Should the need arise these tools can be resharpened if necessary. However, do not use a power grinder as too much heat may be generated which
will destroy the temper of the tools. Kemper recommends that a whetstone, either oil or water, be used to restore your tool’s keen edge without damaging the tool.
200 Series Knives
PT210
M Series Trim Tools
$8.95
Trim Knife
PT220C
PT410S Round 3/4”
$10.25
PTM10
Round 1/4” $7.80
PT420
Half Round 1/2” x 1.5” $10.25
PTM15
Round 3/16” $7.80
PT430
1” Square @ 45°
PTM20
Angle .19” x .42” $7.80
PTM30
Oval 1/8” $7.80
PTM50
Triangle 1/4” $7.80
PTM55
Triangle Small 3/16” $7.80
PTM60
Pie 3/8” Diameter $7.80
PTM70
Rectangle 3/16” $7.80
PTM80
Egg 0.2” Diameter $7.80
PTM90
Square 1/4” $7.80
PTM95
Square 3/16” $7.80
PT220C Thin Blade Trim Knife $11.95
300 Series Trim Tools
PT310
PT315
Pearcorer 1 7/8”
Birdbeak 2”x1 3/8”
$11.05
$11.05
PT320
Round 1 1/2”
$11.05
PT325
Teardrop 1 1/8”
$11.05
PT440
Triangle .5” x 1.25”
$10.25
PT455
Slant Triangle
$10.25
PT460
Pie 1 3/4” Diameter
$10.25
PT480L Teardrop 1/2”
$10.25
PT480S Teardrop 3/8”
$10.25
500 Series Trim Tools
PT510
PT340
Triangle 1 7/8”
Triangle 1 1/8”
$11.05
PT350
Oval 5/8”
$11.05
PT360
Angled 1.8” x 0.9”
$11.05
PT511
Pearcorer 1 1/2” PT512
Pearcorer 1” PT570
Pie 2 1/4” Diameter
$11.05
400 Series Trim Tools
PT410
Round 1”
Pearcorer 1 3/4” $11.05
$11.05
PT345
PT370
$10.25
$10.25
PT571
PT572
Birdbeak 2” x 1 3/8” $10.05
$8.80
PTS10
Round 7/16” $8.50
PTS20
Angle 1/4” x .6” $8.80
PTS30
Square 1/2” $8.50
PTS50
Triangle 1/2” $8.80
PTS60
Pie 5/8” Diameter $8.80
PTS70
Rectangle 1/4” x 1/2” $8.50
PTS80
Egg 3/8” Diameter $8.50
PTS85
Half Round .17 x 5/8” $8.80
$10.75
Birdbeak 1.5” x 1 1/8” $9.75
Birdbeak 1” x 11/16” S Series Trim Tools
$8.80
95
Tools
Flexible Trimmers
Three multi-use, stainless
steel, flexible, compact, long
lasting tools for fine lines;
cleaning edges of slip ware;
texturing; applying; scoring;
refining; decorating; scraping; pressing; compressing; spreading; flattening; and smoothing
wet or dry, soft or hard clay surfaces.
FLXTRM Set of 3 4½” long
$2.50
Duncan Cleanup Tool
The most popular tool for general cleanup of
slip-cast greenware. Double-ended, with a
flat triangular blade
& a curved pointed
blade. Handle dia. 5/16”, 6” long.
TL401
$2.10
Recess Smoother
For smoothing recessed flat spaces on
greenware.
It is also excellent for cutting clay away
from & accentuating raised designs.
Blades are sharpened stainless steel &
set in a smooth hardwood handle.
K20
6” long
$2.89
Greenware Duster Brush
An ovalshaped,
soft hair
brush used to dust greenware after
cleaning seamlines and restoring detail.
Brush size approx
1-1/8” x ¾”, handle 7-3/4”.
DB
$3.99
Cleanup Brush, double-ended
Used to clean small, delicate areas in greenware. The
large, tapered
brush is suitable for light holes in Christmas trees
and doll eyes. The small, straight brush cleans
the small openings in figurines, teacup handles,
lace patterns, etc. The brushes are nylon, set
in a smooth hardwood handle. 6-3/4” long.
CUB
Kemper
$3.79
Deep Cleaners
Deep, narrow vessels require clean-up tools
BB
with long
A2
handles
DPC
& special
blades to
reach hard-to-get areas. A2 & DPC have ends
that are for smoothing uneven areas & small
bubbles on the inside, bottom of vases. The
BB has blades adapted for cleanup work, trimming, and smoothing. The cutting blades are
firmly set in hardwood handles. Brass ferrules
retain the larger cutting blades as illus.
DPC
A2
BB
Fine, sharp needle; curved, pointed,
stainless steel blade.
AB
6-3/4” overall length
$2.59
Heavy, blunt needle; tear-drop shaped
stainless steel foot, flat, smooth bottom.
A3R
6-3/4” overall length
$2.59
Fine, sharp needle; tear-drop shaped stainless steel foot with flat, smooth bottom.
A3N
6-3/4” overall length
$2.59
Fine, sharp needle; curved, pointed, stainless steel blade. 5/16” dia. handle.
K21
6-1/2” overall length
$2.79
Incising & Cleanup Tool
A sharp
needle in one end of the smooth hardwood
handle, & a sharp, stainless steel, spearshaped blade on the other end. For
delicately detailed incising & excising work.
Also used for lace draping.
K-25
6 1/2” long
2.99
Detail Carving Tools
Curved blades provide a very sharp cutting
point that will easily carve minute details
such as facial features, hair, insignia, & jewelry on small porcelain ceramic figurines.
The cutting tip of the DCS is formed at the
end of a round needle which is about the
size of a paperclip wire; the cutting tip of
the DCL is approximately 3 times heavier.
Both have smooth hardwood handles.
They come in plastic vials to protect cutting points.
DCL Large - overall length 5”
3.99
DCS Small - overall length 5”
3.49
DCL
DCS
96
Scratch and Lift Duster
This
combination tool is for clay lifting fine bird
feathers, flower petals, fish scales, etc. It is
also an excellent sgraffito tool. The soft hair
brush is ideal for removing loose particles
when dusting the greenware before firing.
SLD
Overall 6-5/8” long $3.69
Single Ball Stylus
For sgraffito,
Fine ball of stainless steel, treated for
hardness and set in a smooth, hardwood
handle. The furrow made does not create flaking or collapsing of the sgraffito
line. Overall length 4-3/4”.
BSS
.030
$2.19
Double Ball Stylus
DBS
Tool has 1
large and
DBSS
1 fine ball
of stainless steel, also treated and set in
a hardwood handle. Overall length 52”.
DBS med. .045 & .030 Kemper $2.79
DBSS sm. .030 & .045 Kemper
2.79
Clay Lift Sets
Sets have two double-ended tools with
sharpened, stainless steel spoons contoured for easy insertion, lifting, & removal
from moist clay. Make possible the creation
of new decorating patterns & varied effects
previously difficult to obtain, such as bird
feathers, flower petals, and fish scales.
The spoons are firmly held by solid brass
ferrules to smooth wooden handles. Instructions included.
Clay Lift Set, Straight
CLS
Approx. length: 7"
$6.99
Clay Lift Set, Angled
CLS-A Approx. length: 7"
7.29
Sgraffito Tools
Sgraffito Tool
This
tool has a stainless steel, spear-shaped
blade on one end for incising, excising,
widening, & deepening detail work; and a
small, forked, twin-line point on the other for
hairlines, wood grain, & basketweave sgraffito effects in limited access areas. Firmly
set in a smooth hardwood handle.
K27
6” long
$2.99
$3.09
3.39 Wire Loop Sgraffito
3.09 S m a l l
wire loops on each end provide a method
of sgraffito in which variations of line width
Lace Tools
can be made within a single stroke. The
Lace tools are designed to facilitate the ap- furrow created by the loops is smooth, not
plication of slip-soaked lace to greenware flaky, as is usually associated with other
boxes, figurines, etc. Several needle types sgraffito methods. Made of high-strength
are available. The A3R and A3N offer a steel wire firmly set in a smooth hardwood
special foot used for pressing lace as well handle with brass ferrules.
as for cleanup, sgraffito work, and working
WLS
6-1/4” long
$3.19
in wax.
10½”
8½”
8½”
Wire Stylus
Versatile tool for incising greenware. A small
wire loop, firmly set in a hardwood handle,
creates various size furrows depending on
the angle of the point.
WS
6” long
$4.09
CLS-A
CLS
Drill Tools
These tools easily drill holes in delicate &
heavy greenware to make salt & pepper
shakers, jewelry, lamp bases, or potpourri
burners. The single-end drills are adaptable to most hole requirements for tree
lights & jewelry settings. Firmly set in
smooth hardwood
handles. 6-3/4” L.
SPD Salt/Pepper Drill, Kemper $3.89
Drill Bit
DR2 3/16” Bit, 5” long
DR4 ¼” Bit, 4-3/4” long
$2.99
2.99
DR4
DR2
Tools
Multi Drill
MDT Holes from 1/16” up to 5/8” $2.79
Cut Out Tools
Use to cut through wet clay to make cut-out
design openings in slab clay and clay vessels. The COR has a thin, double-edged
steel blade for thin-wall greenware and
delicate work. The COH has a heavier,
sharp, triangular stainless steel blade that
is designed for heavy, thick-wall greenware
and pottery. Blades are double-edged
to permit reverse cuts and sharp turns.
Smooth wooden handles provide a firm
grip & steady control.
4½” long, packaged in plastic vial.
COR
$3.09
Heavy-duty with brass ferrule, 5¼” long.
COH
$3.39
Saw Tools
For
SBR
making
cut-out
K31
designs
K32
in greenware,
the SBR is best for straight cuts while the
blades of the K31 & K32 will cut in any direction that pressure is applied. The K32
is for heavy, thick-walled greenware.
SBR Sabre Saw 5-3/8” long,
2.99
K31 Zigzag 3/8” Saw 5-3/8” long 3.69
K32 Zigzag Heavy Duty 5-3/8” lg 3.89
Trimmer Knives
Features a long,
narrow, stainless
steel blade that is keenly sharpened and
semi-flexible. Used for trimming greenware,
for cutting out designs from slab clay & clay
vessels, & for jobs where a small, sharp
knife is needed. 5” long hardwood handle.
K34
Blade 1½” long, Kemper
$2.39
Flower Petal Cupper Set
Commercial Trim Knife
This heavy-duty
knife is made
especially for trimming production quantities of pottery and ceramic pieces.
The heavy, steel “file-hard” blade is
capable of extended usage on highly
abrasive clay products without sharpening.
TRM
Knife length 7¼”
$4.99
FPC1
Utility Knife
This knife
has a surgically sharp, interchangeable blade along
with a four jaw chuck handle for positive
gripping of the blade. Ideal for fine cuts
on greenware, leatherwork, stencil cutting, and decoupage.
UK
$3.69
Utility Knife Replacements
These razor sharp replacement blades for the utility
knife, made in U.S.A., are
interchangeable with our copetitors’
products. Ex.: X-ACTO, PO, STANLEY,
DIXON, LETRASET, & RED DEVIL.
UKR
Packaged 5 in a box. $2.89
Flower Making Tools
Glaze and Bisque Cutter
Flower Clay Roller
For difficult ceramic
Flower clay is quickly & easily
cutting jobs. A tough
rolled to the proper thickness with these
steel rod blade coated with Tungsten
compact hand-size rollers. Made of smooth
Carbide particles. Cuts thru glaze, bisk,
tile, etc. 6” long.
hardwood & sturdy, heavy-gauge, rust
GBC
Kemper
$4.09
resistant wire.
FCR
31/2” roller
$3.29
Knives
Quilling Tool
Fettling Knives
F96
F97
Use to remove mold marks from cast
greenware; to trim pour hole waste; & for
trimming, carving, & sculpturing tasks.
The soft steel blade may be bent as
desired, while the hard-tempered blade
has the springlike feel of conventional
knife blades. Blades are 41/2” long, set in
smooth wooden handles.
F96 Soft Steel Blade (Kemper)
6.09
SFK Soft Steel Blade (Ceramic Supply)
4.05
F97 Hard Steel Blade (Kemper)
HFK Hard Steel Blade (Ceramic Supply)
6.09
4.05
This heavy-duty fettling knife has a hard,
stainless steel, 5” blade set in a hardwood handle. 8” overall.
FSS Stainless Knife
9.50
Roll quilling paper around slotted quiller’s
tool to make flowers and designs.
QKT
$1.99
Double Pony Roller
This heavy-duty Pony Roller is offered here
due to its quality & versatility. Use it for
rolling out small pieces of clay,
applying clay to the surface
of a shape, flattening sides of
forms, smoothing, spreading,
flattening, making ultra-thin
slabs, & creating textures. It
is also used in sculpture, printmaking, bookbinding, leather working,
plastic, & graphics. Two solid hardwood
rollers, 4” x 15/8” & 2” x 15/8” (slightly barrel
shaped) with steel frame.
PONYR
$10.00
Used to form various
shapes & sizes of flower petals. Hold a thin
rolled layer of clay in
the palm of the hand, pull the clay over the
cupper, & turn a petal to the desired size.
Remove formed clay and thin edges with
fingers to shape. 6 sizes in set.
$6.49
Budsetter
Used to place small
clay buds and flowers. The sharp double
needles, in hardwood handles, stabilize
the objects being placed and eliminate the
turning necessary with a single needle.
K43
Spindles
$1.69
C3
For copper toolC4
ing, burnishing
rub-on lettering, folding & creasing paper
work, & making clay flowers. These
smoothly polished hardwood tools incorporate a variety of shapes.
C3
53/4” long
$1.99
C4
53/4” long
1.99
Rose Sticks
Used in tole and decorative painting. Dip
in paint, roll in circle
to make small roses. Hardwood.
KRS1
Set of 3
$1.89
Pins & Staples for Flowers,
Jewelry & Elements
For clay figures, flowers, jewelry, etc. & to
hold loose kiln elements in place. Made
of high temperature resistant alloy.
ELP
Doz pins 13/8” L
$4.00
ELS
Doz staples 13/8” L
3.99
SKPIN
Doz straight pins
4.00
BHOOK
50 U-shaped 3/4” L
7.25
High Temperature
Flower/Jewelry Wire
High fire wire can be incorporated into your work and
fired. For example, you
could imbed a wire loop
in a figurine, bead, flower,
etc. Wire can also be used to string & support work during firing.
Be sure to test first for your needs.
Rated to C/6. Test for higher temperatures.
BJW20 20 gauge 10’
$5.31
BJW24 24 gauge 10’
5.31
BJW30 30 gauge 20’
4.65
Rated to C/5. Test for your needs.
HTS
24
10’
$3.39
HTW
17
10’
5.89
97
Tools
Loop Tools
For removing controlled amounts of clay
while shaping the clay. Cutting heads are
made of heavy, stainless steel ribbon, with
sharpened ed ges & hardwood handles.
Widest portion of each head. Overall
length: approx. 5”.
Loop Tools
LT3 LT5 LT1 LT7
LT1
½”
LT2
¾”
LT3
1”
LT4
½”
LT5
1-3/4”
LT6
1-1/4”
LT7
1-1/2”LT1 LT2 LT4 LT6 LT8
LT8
1-3/4”:”
LT1 – LT8
each
$3.65
$3.49
Loop Tool (Taxidermist Fleshing)
Large loop tools w/serrated cutting edge.
FT451 1¾”
4.39
FT452 1¾”
4.39
FT453 2”
4.59
Sculpting Tools from Colour
Shaper
Designed especially for artists
and craftsmen
who work three
dimensionally.
Double ended
tools featuring wire end and ribbon tool with either flat chisel or tapered point clay
shapers. An excellent tool for wide use.
The clay shaper tip is made of a durable silicon
material that is extra tough and durable yet
flexible creating a new dimension in working
with moist clay or plasticine. Also works as a
sgraffito decorating tool creating patterns and
textures in glazes and slip.
Ribbon tip is formed with highty tempered
steel for durability and strength when working
with clay.
55600
55601
55602
55603
55606
55607
55610
55611
98
Ribbon & #0 Flat Chisel
Ribbon & #0 Taper Point
Ribbon & #2 Flat Chisel
Ribbon & #2 Taper Point
Ribbon &#6 Flat Chisel
Ribbon &#6 Taper Point
Ribbon &#10 Flat Chisel
Ribbon &#10 Taper Point
Ribbon tools derive their name from the
thin, flat, ribbon-like steel that is used
to form their cutting heads. These tools
provide sharp cutting edges with additional strength in the direction of cut.
Mini Ribbon Sculpting Tools
Made of ribbon steel,
heat-treated for maximum
strength. Firmly set in a
¼” dia. by 5” aluminum
handle. Ideal for working with clay, greenware,
plaster, bread dough, wax
or other modeling medium.
MRS
Set of 6
$14.79
Ceramic Supply Aluminum Sculpting
Tool Kit
Perfect for fine sculpting, detailing, and
trimming. Ideal for working with moist
clay, plaster and greenware, these tools
are made with fine ribbon steel, heattreated for maximum strngth. Sturdy 5”
aluminum handles.
ASTK Set of 6
$13.47
Loop tools (Heavy-Duty)
Larger loop tools for sculpture & trimming.
FW11
1½”
FW12
¾”
FW21
1-1/8”
FW22
1”
FW31
1¼”
FW32
1-5/16”
FW11 – FW32
each
Ribbon Tools
11.29
11.29
12.79
12.79
14.49
14.49
18.79
18.79
6”Ribbon Tools
A variety of shapes for light cutting and
slicing. Ends are formed from spring steel
and are attached with brass ferrules.
R1
3.09 R2
3.09 R3
3.09 R4
3.09 R5
3.09
6” Ribbon Tool Sculpture Set
All five of the popular 6” ribbon tools in
an attractive, reusable vinyl pouch.
RSS
Set of 5 ‘R’ tools
$14.79 Wood & Steel Ribbon Tools
These tools combine imported hardwood
modeling ends with sharpened stainless steel
ribbon cutting ends attached with heavy brass
ferrules. 8” to 9” long.
RE27.99
RE37.99
RE47.99
Special Ribbon Tools
Designed for medium-duty pottery and
sculpture work, these tools have sharpened, stainless steel ribbon ends which
are attached to hardwood handles with
heavy brass ferrules. 7” long.
KSP1
4.29
KSP4
4.29
Double Wire Tools
6” Double Wire End Tools
For light cutting and slicing. Ends are made
from high-strength wire and are attached to
the hardwood with brass ferrules.
D1
D2
D3
D4
D6
D7
D8
D9
D10
$3.29
3.29
3.29
3.29
3.29
3.29
3.29
3.29
3.29
6” Double Wire End Tool Set
Five of the most popular sculpting tools of
this series in a vinyl pouch. D1, 2, 3, 7,10.
DSS Set of 5 ‘D’ tools
$15.49
8” Double Wire End Tools
For medium-duty cutting & slicing of clay.
Made of high-strength stainless steel set in
hardwood handles with brass ferrules.
8A1
8B2
8C3
8D4
8E5
8G7
8H8
8” Ribbon Tools
For medium duty cutting, shaping, & slicing. The cutting ends are formed from
high-strength, sharpened stainless steel,
and are firmly attached to hardwood
handles with brass ferrules.
8R1
3.99 8R2
3.99 Wire & Wood Tools
8R3
3.99 8R4
3.99 Ceramic Supply
8” Sculpting/Ribbon
8R5
3.99 Tool Set
8R6
3.99 One end is high carbon
8R7
3.99 steel for cutting & shaping. Opposite ends are
specially shaped for mod8” Ribbon Tool Sculpture Set
Five of the most popular 8” ribbon tools. eling and shaping.
Includes 8R1, 8R2, 8R3, 8R4, & 8R5 in an SRTK 6-Piece
attractive reusable vinyl pouch.
8RSS
Set of 5
$18.79
Ceramic Supply 8”
Double Wire End Tool
Kit
DRTK
Set of 6
$18.86
4.99
4.99
4.99
4.99
4.99
4.99
4.99
$12.90
Tools
Wire & Wood Tools
Wire and wood tools are combinations of
wood modeling tools and wire tools. The
5” and 6” wire and wood tools are used
for delicate clay removal, modeling, and
shaping. Made with plated, high-strength
music wire, brass ferrules, & hardwood.
5” Wire and Wood Tools
W21
$4.29
W22
4.29
W23
4.29
W24
4.29
W25
4.29
W26
4.29
10” Wood Tools
Modeling Tools
Imported Boxwood Tools
Smoothly finished hardwood sculpting &
modeling handles with tough, steel-sharpened cutting heads & heavy brass ferrules.
210
13” long
10.29
212
13” long
10.29
The most popular shapes in 10” lengths.
406
$5.29
404
5.29
402
5.29
Smooth tools made from quality boxwood. Use to cut, contour, smooth, &
decorate.
JA4
JA104
JA5
JA6
JA8
JA15
JA17
JA18
JA22
JA24
JA28
JA32
JA37
JA137
6” $1.39
8” 1.49
6” 1.39
6” 1.39
6” 1.39
6” 1.39
6” 1.39
6” 1.39
6” 1.39
6” 1.39
6” 1.39
6” 1.39
6” 1.39
8” 1.49
6” Wire and Wood Tools
W1A
W1C
W1D
W2A
W3E
W5
$4.99
4.99
4.99
4.99
4.99
4.99
8” Wire and Wood Tools
WE8A
WE8B
WE8C
WE8D
WE8E
$6.99
6.99
6.99
JA Series Modeling Tool Set
6.99
All 12 of the 6” tools, in a cardboard box.
6.99
JAS
$13.99
Wood Modeling
A variety of shapes for clay modeling,
cutting, smoothing, contouring, etc.
Made from imported hardwood. High
standards assure consistent quality &
form.
WT1
6”
3.19 WT2
8”
3.39 WT3
6”
3.19 WT4
8”
3.39 WT5
6”
3.19 WT6
8”
3.39 WT11
6”
3.49 WT12
8”
3.79 WT15
6”
3.59 WT16
8”
3.79 WT18
8”
3.39 WT19
6”
3.19 WT20
8”
3.39 WT21
6”
3.19 WT22
8”
3.39 WT26
8”
3.39 WT27
6”
3.19 WT28
8”
3.39 WT29
6”
3.19 Basic Tool
Sharp and pointed on one end and square
and flat on the other. For modeling in clay,
for hard-to-reach areas on greenware, and
for light sgraffito work.
BAS
7-1/2” long
Ceramic Supply
Modeling Tool Kits
These are tools available in the traditional shapes for cutting, contouring and
smoothing.
BMTK
10-Piece 6” Boxwood $9.18
BMTK38 38-Piece 8” Boxwood 45.00
PMTK
7 Piece 6” Plastic
3.18
BMTK-Boxwood
BMTK38-Boxwood
PMTK-Plastic
Classic Sculpturing Tools
Royal Tools & Knives
RBD1 Sm. Cleaning Tool
$ 1.50
RBD2 Lg. Cleaning Tool
$ 1.65
RBD3 Spear Tool
$ 1.50
RBD4 Wire Loop Sgraffito
$ 1.65
RBD4S Scratch ‘n’ Dust
$ 2.50
RBD5 Stylus Tool
$ 2.20
RBD6 Double Drill
$ 2.20
RBD7 Glaze Saw
$ 4.40
RBD8 Double Spoolie
$ 1.65
RBD9 Sabre Saw
$ 2.64
RBD10 Lace Draping
$ 1.65
RBD11 Deep Sponge
$ 2.20
RBD12 Deep Recess
$ 2.20
RBD14 Lg. Cutout Knife
$ 3.05
RBD15 Micro Stylus
$ 2.20
RBD30 Small Spoolie
$1.10
RBD31 Large Spoolie
$1.40
RBD32 Palette Knife
$1.00
$ 1.09 99
Tools
Hole Cutters & Hole Punches
Hole Cutters make cutting clean holes in
wet, thick-walled greenware easier. Use
to make a variety of designs. The cutting
tubes are sharpened, polished brass,
& some are set in smooth hardwood
handles.
¼” Hole cutters & punches, 5” long.
HC1
Cutter
$3.09
HCP1
Cutter punch
5.99
¼” Hole cutters & punches 53/8” long.
HC1A
Cutter
3.19
HCP2
Cutter punch
6.69
HCP1
3.39
3.89
7.99
Square Hole Cutters
Make quick and easy square cut-outs
in an instant. Consists of two pieces of
brass tubing for clean cuts. Color coded.
HCS1
HCS2
HCS3
HCS4
HCS1
HCS2
HCS3
HCS4
/32”Square (red)
/8” Square (blue)
3
/16” Square(yellow)
1
/4” Square (black)
3
1
4.39
5.19
5.29
6.15
Throwing Sticks
Patterned from ancient Japanese egote,
these throwing sticks aid in shaping and
compressing deep and narrow necked
wheel-thrown pieces. These throwing
sticks are made in two sizes from fine
imported hardwood, and are polished to a
satin-smooth finish. Approx. 12-1/2” long.
TS1
TS2
TS1
TS2
Handle Makers
10.69
10.69
Make perfectly shaped clay lengths by
drawing through clay,
then cut and attach to
ceramic vessels as handles. The inside
taper on the cutters compresses the clay
as it’s cut, giving the clay handle a smooth
finish. The HM1 makes larger handles
suitable for pitchers, while the smaller
HM2 makes handles for mugs. Stainless
steel ends are set in hardwood handles.
Approx. 4” long.
HM1
15/16” For Pitchers
2.39
HM2
9/16” For Mugs
2.39
100
All the basic pottery
tools required for
the professional as
well as the beginner.
Contains one each:
Loop Tool, Ribbon
Tool, Potter’s Rib,
Needle Tool, Wood Modeling Tool, Sponge,
Scraper, & Wire Clay Cutter. Comes in a
reusable, clear vinyl bag with pockets for
each tool.
PTK
Kemper
17.99
SPTK Ceramic Supply
9.13
Heavy Duty
Pottery Tool Kit
HCP2
5/16” Hole cutter, 53/8” long.
HC2
½” Hole cutter, 51/2” long.
HC3
7
/8” Hole cutter, 5-1/8” long.
HC4
Pottery Making Tool Kit
Slicer & Toggle Clay Cutters
Heavy Duty Adjustable Clay Cutter
The Portion Master is
a useful tool for the
studio or classroom.
Ideal for cutting slabs,
tiles, extrusions. Eliminates tangles and lost
wires. Adjustable bar
allows you to select your clay thickness.
Simply pull the handles to end up with
a uniform cut. Cuts up to 7” wide and
between 1/8” to 4-1/2” deep.
SLICER-LG$16.14
1.01
Small Clay Slicer
A heavy-duty, adjustable clay slicer for
the controlled cutting of very thin to ½”
slivers. Heavy-duty aluminum frame,
brass locking screw, replaceable stainless steel cutting wire. Easily cleaned.
Non-rusting.
SLICER 5-1/2” L X 4-1/2” W $8.33
Toggle Clay Cutters
Scrapers are used for shaping, smoothing,
and trimming forms. Can also be used as
a squeegee to remove excess water when
working. The SCOMB is not flexible and is
serrated on all three sides, with 3 differentsized comb points. The S10 is serrated on
all but the flat side. The rest of the steel
scrapers are made of thin flexible spring
steel. The S11S and S12 are of a slightly
heavier-gauge steel.
S1
S10
S3
S11S
S4
A wonderful heavy-duty
kit with unique tools. Kit
includes deluxe toggle
wire cutter, 13 1/2” textured paddle, 10 1/2”
curved paddle that can
also be used for surface decorating, and 2
throwing sticks 9” & 13”.
HDPTK
23.68
Replacement Wire
SLICER-LGWIRE Metal Scrapers
Used for slicing & cutting lump
clay, & for cutting pots & other
items from the throwing head
of the potters wheel. Hardwood 3” toggle
handles are firmly fastened to approximately 18” of fine-quality, stainless steel
wire for the K35. K36 is a high-strength
braided nylon cord.
K35 Wire Clay Cutter (Kemper) 2.75
WCC Wire Clay Cutter (Ceramic Supply) 1.95
K36 Nylon Clay Cutter (Kemper) 2.75
HDCC Heavy Duty Wire Clay Cutter
3.21
(Ceramic Supply)
S12
S6
S1
S3
S4
S6
S10
SS101
SS103
SCOMB
MR01
MR04
MR06
MR10
MR11S
S11S
S12
4-5/8”
4”
3-7/8”
4”
3-3/4”
3-3/4”
6-7/8”
4-1/2”
4-5/8”
4”
4”
3-3/4”
6”
6”
6”
Kemper
$1.99
Kemper
1.99
Kemper
1.99
Kemper
1.79
Kemper
2.49
Kemper
5.36
Kemper
11.00
Kemper
5.33
Ceramic Supply 1.52
Ceramic Supply 1.38
Ceramic Supply 1.52
Ceramic Supply 2.19
Ceramic Supply 3.22
Kemper
3.29
Kemper
2.79
Steel Turning Tools
Sturdy steel tools. Long-lasting & versatile. Can be resharpened for longer use.
Trim-Gin
Each tool has five cutting edges allowing
you to do almost any trimming job.
TGIN15 6” long
$14.40
TGIN19 7” long
14.40
Trim-Gin Kit
A complete kit for all your trimming needs.
Includes trimming tools TGIN15, TGIN19, &
stainless steel ribs S101, S102, and S103.
See Scrapers, this section.
TRIMKT Set of 5 tools
$36.08 TT1
TT2
TT3
TT4
TT5
Turning Tools
Turning tools are used by potters to accurately shape, contour, and trim clay and
plaster forms on the wheel. The heavy
steel heads are brazed to steel shafts,
plated, and firmly set into smooth hardwood
handles. TT4 is a right-hand half moon.
TT5 is a left-hand half moon. All turning
tools are approx. 9-1/4” long.
TT1-TT5
ea.
$9.69
Tools
Pot Lifters
PL1
PL2
PL3
6” Wide
5” Wide
4’ Wide
3-pc. Pot Lifter Set (6”, 5”, 4”)
PLSET
20.24
FRSS
Cutoff Needles
Potter’s Cut-Off Needle
A thin, strong needle is set in a hardwood
handle to make this an inexpensive yet
valuable tool. It is used to cut through
and remove the uneven top edge of
thrown items. Makes a clean, smooth cut
with a minimum of drag. 5” long.
PCN
$ .95
Potter’s Needle,
Heavy-Duty
This tool has a heavy, sharp needle set in
a ½” diameter handle.
PNH
Kemper
1.59
NTH
Ceramic Supply
1.20
Pro Needle
Heaviest-Duty
Our heaviest needle
tool. The large, sharp needle is firmly
set in an aluminum handle which is finely
textured to provide a firm grip for wet
hands. May be used to cut heavy clay
strips, designs in clay, and to put holes in
salt shakers. 6” long.
PRO
$2.29
Piercing Tool
For piercing lampshades,
paper, etc.
PT1
Short-Set Needle
PT2
Heavy-Duty Needle
PT3
Double-Ended Needle
PT1
PT2
PT3
$1.89
2.39
2.29
Calipers
Aluminum Calipers
Used to transfer measurements from the
model to the clay, & to measure
thickness & diameter. These calipers
are made from a tough, aluminum alloy,
& are lightweight & easy to handle. Will
measure both inside & outside dimensions. Made with rust-free hardware.
Easily adjusted by hand.
AL8
8” long
$6.89
AL10
10” long
7.79
AL12
12” long
9.29
Proportional Calipers
Lid Master
Does the work of two calipers
with speed & accuracy. Measure the opening of your pot &
it will give you the correct measurement for the lid. Change
the pivot point on the caliper
PL1
& you’ve got a built-in 12-1/2%
differential which allows for clay shrinkPr
$10.99
age. Accurate at any dimension. Works
Pr
9.69
on the first try. Instructions included.
Pr
9.19
LM For standard lids 0” - 111/2” $15.85
LML For large lids 0” - 161/2”
32.67
Provide an easy method for removing pottery items from the throwing wheel without
damage. Made of rust-free, high-strength
aircraft aluminum alloy. Available in three
sizes to fit a wide range of forms.
Enlarges up to five times—reduces to
1/5. Used for inside & outside measurements.
PC18 18” Capacity
$90.00
FRSO
Rubber Ribs & Squeegee
Used for smoothing, shaping, & finishing.
Can also use as an applicator for decals
as it is especially good for removing air
pockets without damage.
Ribs - Pliable, kidney-shaped rubber ribs
in two sizes & two grades of resiliency.
FRSM Small, Hard (Kemper)
3.19
RRBK-SSmall, Hard (Ceramic Supply) 2.15
FRSS Small, Soft (Kemper)
3.19
RRBL-SSmall, Soft (Ceramic Supply) 2.15
FRH
Large, Hard (Kemper)
3.19
RRBK-LLarge, Hard (Ceramic Supply) 2.17
FRSO Large, Soft (Kemper)
3.19
RRBL-LLarge, Soft (Ceramic Supply) 2.17
Squeegee
Medium-hard plastic.
SQUEG
3” x 4”
$3.25
Large Red Finishing Rubber
RIB-SR43L
5.5” $ 4.00
Kemper Texture Ribs
These new Kemper ribs provide you with
texture, angles and curves. Ribs have
different shapes an each end and come
individually packaged.
RBT1
RBT2
RBT3
RBT4
RBT5
RBT6
RBT7
RBT8
Kemper Textured Ribs #1 $7.95
Kemper Textured Ribs #2
7.95
Kemper Textured Ribs #3
7.95
Kemper Textured Ribs #4
7.95
Kemper Textured Ribs #5
7.95
Kemper Textured Ribs #6
7.95
Kemper Textured Ribs #7
7.95
Kemper Textured Ribs #8
7.95
Wooden Ribs
These are the basic shapes required for
opening, shaping, curving, smoothing, &
trimming wet clay on the potter’s wheel.
Smooth-finished, imported hardwood.
RB1
$4.19RB2
3.79
RB3
3.49RB4
3.99
RB5
4.99RB6
4.29
RB7
3.89RB8
4.99
RB1
RB2
RB3
RB4
RB5
RB6
RB7
RB8
Ceramic
Supply
Wooden
Rib Kit
Hand formed
and rubbed
throwing ribs, set of three with finger
holes for easy handling. Use for shaping,
curving, smoothing and opening clay.
WRK 3-Piece
$4.27
Ceramic
Supply
Tools
Ergonomically designed 3-dimensional wood rib/tool.
Perfect forms for
precise function.
Our new series of tools are made by a
potter for a potter.
CSIT3 4” $3.00
CSIT5 10” $5.00
Double “0”
Rib
Hand formed and finished from imported
hardwood, this rib is used for cutting, slicing, shaping, and smoothing soft clay.
RB00 Approx. 12” long
$7.59
Sculptor’s
Thumb
This is a
compact, hand-fitting sculpture tool that
duplicates thumb and finger strokes
without abrasive wear on the sculptor’s
hands, fingers, and thumbs. Made from
imported hardwood. 5” long.
STH
$6.49
101
Tools
Spear Tip Cleanup
Excellent for general cleanup of
greenware as well as for re-carving lost
detail. Double-ended, with a flat spearshaped blade & a curved pointed blade.
Handle dia. 5/16”, 6” long.
TL402
$1.85
Glaze Tools
Large Cleanup
A larger version of TL401 Cleanup, excellent for cleaning large, heavy castings.
Double-ended, with a flat triangular blade
& a curved pointed blade. Handle dia. 3/8”,
overall length 61/2”.
TL403
$1.85
Swizzle Stick
Twirl the aluminum
handle between your palms, and the wire
mixing loops rapidly agitate and mix stains,
glazes, & paints in the bottle. Use as you
would a conventional egg beater.
SWZ
Approx. 6” L.
$3.19
Dipping Tongs
For dipping ware directly into the glaze.
Features four sharp
gripping points for minimal contact with the ware. The deep throat
design makes it easy to dip large platters
without touching the rim. Approx. 10” L.
Heavy plated steel.
DTA
Kemper
10.75
DTONG Ceramic Supply
8.95
Sgraffito Duster
On one end, a tapered cutting end that
allows for gradual deepening & widening
of lines; on the other, a soft camel hair
brush on the other end for removing dust
from sgraffitoed lines. Handle 5/16” dia.,
6-3/4” long.
TL407
$2.40
Stylus
Excellent for
tracing patterns onto greenware & for incising work. This double-ended tool has two
balls: 1 for fine, & a for extra fine work.
Handle dia.
5/16”, 5-1/4” long.
TL411
$2.40
Double Spiral
A small straight bristle spiral brush on one
end & a large tapered bristle spiral on the
other for cleaning hard-to-get-at areas &
holes. Handle dia. 5-1/16”, 5-3/4” long.
TL412
$2.95
Palette Knife
For the mixing and blending of colors on a
glazed tile or palette, & for applying color
in palette knife techniques. Blade length
of knife is 2-7/8”, overall length 6-3/4”.
TL420
$3.50
Palette Knives
Palette Knives are used for grinding and
mixing small quantities of china paints,
oils, slip colors, and glazes. The blades
are made of the finest flexible steel and are
firmly mounted in wooden handles.
P5D
½” blade (Kemper)
$4.79
P41
3” blade
4.99
P47
Offset 32” blade
4.99
P5D
Plastic Palette Knife
3-12/” blade
.99
Patching Spatula / Palette Knife
Small
spatula
for pathcing greenware, etc. Two different size blades.
PAS
3.29
102
Doll Maker’s Tools
Cut Out Tool
Double-edged steel
blade used to cut out eye sockets.
Smooth hardwood handle.
COR
$3.09
Hand Drill
Used for making
sew holes 1/16”.
SPD
Doll Eye Setter
For setting eyes in dolls. Helps insert the
eye into hard to reach areas.
DES
2.89
Ceramic Cleanup Tool Kits
Ceramic Tool Kits
The 7 most popular tools
ideal for beginners & advanced ceramists. Good
for classroom use. Contains: wire loop sgraffito,
cleanup tool, cut-out tool,
palette knife, lace tool, sabre saw, & salt
& pepper drill. Complete with description
of each tool, & suggestions use.
CTK7 Kemper
$21.99
CTK01 Ceramic Supply
$11.80
Ceramist Beginner’s Kit
This kit contains: K23 cleanup tool, DB dusting brush,
RS220 rubber scrubber, &
SPR round sponge. An ideal starter kit.
BK
$3.89
Greenware Cleaning Kit
Contains essential tools to
begin cleaning greenware:
K23 cleanup tool, RS100 rubber scrubber, SPR sponge & instructions on uses.
GCK
$ 3.89
Cleanup Tools
K23
K24
B3
3.89
Cleanup Tool
Lady Finger Tool Set
One flat, triangular blade and one curved,
Excellent for separating
pointed blade. 5/16” dia. handle, 6” long.
fingers on porcelain dolls.
Includes fine, medium,
K23
Kemper
$2.99
and course hardened-steel burr tips.
LFTS
Set of 3
9.89
Spear Tip Cleanup Tool
One spear-shaped blade and one
Mini-Finger Tool Set
Finer tips (x-fine and xx-fine) than
curved, pointed blade. 3/8” dia. handle,
regular finger tools. Mounted on
6½” L.
a short handle that gives more
K24
Kemper
$2.79
control and the sensitive touch
that is required for extremely deliLarge Cleanup Tool
cate work on miniature dolls and
One flat, triangular blade and one curved,
other porcelain objects. Will work
pointed blade. 3/8” dia. handle, 6½” L.
in areas where the larger finger
tools won’t.
B3
Kemper
$2.59
MFTS Set of 2
5.99
Doll Eye Sizer Set
Used to sand out eye
sockets of dolls to
enable the insertion of
glass eyes. Hardwood.
ESS
8 sizes 10mm-24mm
P41
P47
P2
Spatter Brush
Evenly & predictably applies liquid
designs onto your ceramic or craft pieces.
Delivers pinpoint control by combining a
nylon brush on a sturdy metal handle with
a free-turning wood spool and pin. 6” L.
SBT
$5.59
Wipe Out Tool
Wipes out any area with two silicon tips:
one bevel edged, the other a fine point.
$6.99
Doll Detailing Kit
Includes:
COR, for eye
cutout; LFM
(from the
LFTS) & K26
for cleaning and separating fingers; and
DES for setting glass eyes in place.
DDK
10.99
Tips are solvent resistant and non-absorbent. Used for China Painting, Dollmaking, Sculpting, Pottery & Ceramics,
Oil Painting, Watercoloring, and Tole
Painting.
WOT
$5.69
CLA-TL9 Clay Texture Tool
$5.95
Sculpting Tools & Accessories
Plaster Carving Sets
Drill Bits for Ceramics
Carbide Drill Bits
Available in 3 popular sizes: 1/16, 3/32", 1/8".
Will fit standard hand-drill or motor tool. All
sizes cut fired glazes, bisque and porcelain
without chipping. Use to drill porcelain doll
heads for earrings, clean fired glazes from
closed holes in salt and pepper shakers,
Christmas tree lights and form other areas
where glaze has run. Allows for correction
even after bisque firing; for cutout work, removing stilt marks and fitting bank slots.
BIT1-116
1/16"
11.95
BIT1-332
3/32"
11.95
BIT1-18
1/8"
11.95
BIT3
3 bit set
Set
35.85
Plaster Tools
Trim-Gin
TGIN15
TGIN19
6”
7”
$14.40
14.40
ea.
ea.
5pc. Plaster Tool Set
Hand forged tempered
steel set of 5 plaster tools
are ideal for sculpting and
modeling plaster as well
as clay. Average tool
length is 7 3/4”. Coveniently packaged in a leather carrying
case.
SPT05
$24.30/set
8pc. Professional Riffler Set
Double sided 8” long
forged steel rasps are
designed and forged
for years of dependable
service. Each riffler is
hand forged, crafted and cut by a master
tool maker offering unique workability on
wood, stone, plaster and other modeling
materials.
FIL08
$17.50/set
Sculpting Knives
Turning Tools
TT1
TT1-TT5
TT2
TT3
TT4
9-1/4” long
TT5
ea. $9.69
Tempered steel blades firmly set in natural
wood handles. Blades are contoured and
shaped for trimming and sculpting.
PKF02
5” Blade
$3.24
PKF03
3 1/8” Blade
$2.71
PKF04
3 1/2” Blade
$4.30
Wood Carving Sets
Plaster Toothed Scraper
B
6pc. Palm Grip Wood/Linoleum Block
Carving Set
A
Beautifully packaged in a wooden case,
Plaster Toothed Scraper
this set of 6 tools feature durable heat
PSCRAPA Large
$18.00
treated steel blades set in smoothly
PSCRAPB Medium
8.00
finished bulb shaped wooden handles
designed to conform to the palm of your
Plaster Rasps
hand. This specially designed feature al1
lows for hours of comfortable woodcarving
2
or linoleum block cutting.
Plaster Rasps
EKR06
$24.30/set
3
Perforated, steel rasps for plaster.
RASP1
9"
$7.03
RASP2
7½”
5.96
RASP3
6½”
4.85
RASPSET
Set of 3
17.83
12pc. Pro Wood Carving Set
Beautifully packages in a wooden case for
Round Rasps
easy carrying and storing, this set of 12
carving tools is made of hand forged, high
quality tool steel to ensure highest quality
and long lasting durablity. Each wooden
Easy to clean rasps are hand made using handle features an external cap ferrule to
forged steel. Round in cross section set in prevent handle breakage. Carefully desmoothly finished wood handles.
signed, produced and assembled for the
RSP02-8
8” Round Rasp
$4.00
professional carver.
RSP02-10 10” Round Rasp $5.40
EKB12
$45.00/set
10pc. Swiss Needle Set
Prescison 5 1/2” long
needle files produced to
exacting specifications for
jewelers, watchmakers and
other precision craftsmen.
Ideal for sculptors, potters and other 3-dimensional artists. All files are double cut
for sharper, faster cutting.
FIL10
$13.50/set
Stone Carving Set
12pc. Hi-Carbon Steel Set
12 - 6” long carving tools handmade of hi-carbon
steel, each with
different blade
shapes. 6 have 2
different blades. This set has the durablity and flexability for soft stone carvers.
SCT12-12
$24.30/set
Armatures / Wire
Strong, fully adjustable, & built
of non-staining, pliable almaloy
wire. Backirons are of sturdy
steel secured in base.
Head & Bust Armatures
Size
HA13 13” ½ life size
HA15 15” 5/8 life size
HA20 20” Life size
Price
$18.00
30.00
32.00
Figure Armatures
FA8 8” 18.00
FA12 12” 24.00
FA15 15” 34.00
FA18 18” 40.00
FA24 24” 54.00
Animal Armatures
AA8 8” with board & adjust
able back iron
22.00
AA10 10” with board
30.00
Armature Wire
Almaloy is a non-corrosive, light-weight,
fully pliable, nonstaining, economical wire used to support
clay forms.
Wire No
Price
AWIR116 32’
1/16” dia.
$3.15
Figures up to 15”AWIR18
20’
1/8” dia.
4.70
Busts/Figures to 24”
AWIR316 10’
3/16” dia.
5.82
Busts/Figures to 3’
AWIR14
10’
1/4” dia.
13.13
Life Size Figures
AWIR38
10’
3/8” dia.
16.47
Reinforcing Materials
Burlap
Wide weave, 5-ounce burlap.
BURLAP Per yard (40" wide) $ 3.78
103
Sponges, Greenware Files & Sanding Tools
Sponge Tools
Sponge with Holder (sponge included)
Hard wooden handle screws firmly to
favorite sponge. Gouges in the clay are
practically eliminated because the sponge
surrounds the metal parts of the holder.
Approx. 13” long without sponge.
SPG
$3.99
SS3
Replacement Sponge
1.00
Clean-Up Sponges
A must for cleaning all your workshop
surfaces. Longlasting, absorbent, soft &
inexpensive. Polyester.
Flattened Round Sponge:
PRD
4” x 2”
$2.44
Rectangular Sponge:
PREC
63/4x 41/2” x 21/2”
2.99
Spongette Tools
Soft sponges
mounted on
convenient handles of two
different lengths.
K33
Cellulose
7” long
K33L Cellulose
13” long
Files for Greenware
$3.39
3.49
Sponges (Measured when wet)
Elephant Ear Sponges
Absorbent, fine grained,
soft, & flexible natural
Mediterranean sponges. Excellent for
throwing & finishing. Sizes are approx.
21/2 - 3”
3” - 31/2”
4” - 41/2”
2.20
3.00
5.50
Silk Sponges (approx. size)
Fine, soft, natural, perfect for
decoration or applying color.
SS1
1” - 11/2”
1.00
SS2
2” - 21/2”
1.33
SS4
2 1/2” - 3”
2.49
Synthetic Silk Sponges
Wool Sponges
104
Two-sided cleaning files. Will not
gouge greenware! The maroon
side is a medium grit to clean
large seam lines. The white side
is a finer grit for finishing work.
The all white files are fine only.
Cleans greenware & polishes porcelain bisque. Durable, flexible,
& with two sides: coarse & fine.
Outlasts ten pieces of ordinary
sandpaper. Sanding pads can be
permanently attached to your work table
to eliminate uneven surfaces.
GSF 3” x 2”
Ea.
1.99
GSQ 81/2” x 11”
Ea.
5.99
FILSM Med/Fine
FIL5M Med/Fine
FIL7M Med/Fine
½” x 4”
½” x 5”
¾” x 7”
Rubber Scrubber
$1.46
2.10
2.60
Porcelain Greenware File
Each file is divided into 3 grit areas: the pink
area is 400 grit for large seams; the grey
area is 1200 for smoothing; and the white
area is 6000 grit to polish out scratches.
FIL5P ½” x 5”
Ea.
$2.10
Clean-Up Sticks & Files
For greenware and bisque, 1/8” x 5”L.
Use wet of dry. Clean those hard to reach
areas.
Ea. pkg/12
BSTICKF Fine grit
$ .85
7.20
BSTICKM Medium grit
.85
7.20
BFIL5F
5/8” x 5” Fine 1.63
BFIL5M 1/2” x 5” Med 1.55
BFIL7F
3/4” x 7” Fine 2.50
BFIL7M 1/2” x 7” Med 2.85
Black Magic Greenware Cleaners
Polyester sponges are taking the place of
natural sponges. They last longer & always
stay clean. Their uniform size, low price, &
consistent quality make them an excellent
buy. Perfect for cleaning greenware pieces.
SS3
21/2”
$ 1.00
(Honeycomb)
Absorbent, soft, & excellent
for decorating, finishing, &
cleanup.
WS312 31/2” - 4”
WS412 4” - 41/2”
WS512 5” - 51/2”
WS612 6” - 6-1/2”
Grizzly Sanding Pads & Squares
Greenware Files
The X-Sponge
Remove the water
beyond your reach!
The X-Sponge is
not your ordinary
“sponge-on-a-stick.”
The stainless steel rod telescopes from
a shallow 8.5” all the way to 26”, making
sure you’ll never leave water in the bottom of your pots ever again!
TXCSX The X-Sponge$16.74
TXCSR Replacement Sponge 7.50
EE3
EE312
EE412
Sanding Pads
This cleaning whiz is a long, narrow,
abrasive sponge on a stick. Three sizes
let you clean those hard to reach areas.
Overall length approximately 7½” x 8”.
BMMINI Mini: 1/4” dia.
BMSM Small: 3/8” dia.
BMLG Large: 5/8” dia.
3” square abrasive coating on
one side & foam pad on the
other. Use for smoothing ceramics,
china, and porcelain pieces.
RS100
For ceramics
$1.53
RS220
For porcelain
1.53
Green Pads
Use to clean seam lines on greenware, &
to smooth rough spots. Can be cut into
smaller pieces with scissors.
GP
6” x 9” sheet
$1.00
Greenware Cleaning Kit
K23 cleanup tool, RS100 rubber scrubber, SS3 sponge & instructions
GCK
$3.89
Stilt Mark Stone
Gently rub with this
stone to remove stilt marks & other rough
spots on fired ware.
SMS 31/2” Carborundum Stone $3.99
Rubbing Stone
Silicon carbide rubbing
blocks with comfortable
wooden handles. For removal of glaze drippings & run-offs from
kiln shelves & pot bottoms.
RUBSTONE 6” x 3” x 1”
$37.27
1.23
1.53
1.66
Metal Spatulas
Greenware Hole Tool
2.50
3.90
5.50
8.50
Easily round, smooth or bevel any opening in greenware. Perfect for bank or salt
& pepper stopper holes. Washable white
nylon.
TRISM 3”
$2.75
TRILG 4-1/2”
3.25
METSP8 8” Wide Blade
METSP12 12” Wide Blade
METSP14 14” Wide Blade
$14.95
18.40
19.65
Brushes & Accessories
Multi Bin Organizer
Chinese Multi-Headwash
52-hole organizing bin for all
your studio supplies. Keeps
everything at your fingertips.
Collapses for easy storage.
BH
$ 12.41
Soft white hair in split bamboo
handles. Handle length 4”, hair
length 13/4”.
# of handles Width
Price
CMH-3
3
1”
$ 1.83
CMH-6
6
2”
3.58
Spin-o-Tray
Heavy-duty plastic revolving tray on sturdy metal
base with no skid feet.
Great for tools, brushes, pencils, and
other items that can clutter your studio or
classroom. Features (3) large divisions
at the top/center, (20) 7/16” holders, (25)
1/2” holders and (60 shallow trays. 6
1/2”H x 10” Diam.
RTBH
18.95
Royal Brushes
Brush & Tool Canvas Roll-Up
Sable Brushes
BTROLL
10" x 10"
Crafters Tool Tote Bag
TOTE
12" x 14" x 5"
5.99
11.99
Plastic Paint Palettes
940 Oblong with 6 wells .82
941 Round with 10 wells 1.05
RBD37
RBD36
RBD38
RBD36 Watercolor Cup
RBD37 Plastic 6 Well Pallete
RBD38 Plastic 10 Well Pallete
$ .62
.83
1.20
Brush Basin
Improved basin holds,
saves, soaks, cleans,
wipes, & shapes your
valuable brushes.
Openings around rim
hold brushes before, during, & after use.
Ribs on the bottom make brush cleaning easy. Brushes can be suspended in
solvent without crushing bristles. Comes
with lift-off top & can store all solvents.
BASIN
$ 7.49
Bamboo Brushes
Bamboo Sumi Brushes
Long tapered points of
fine textured hair. Strong
fiber ferrules in bamboo handles.
BB3/0
3/0
$
BB1
1
BB2
2
BB3
3
BB4
4
BB5
5
BB6
6
BB8
8
BB10
10
BB12
12
BB14
14
1.63
1.82
1.95
2.04
2.16
2.41
2.98
3.51
4.07
4.59
5.15
Hake Brushes
HAKE-1
HAKE-2
HAKE-3
HAKE-4
1”
2”
3”
4”
3.50
4.50
6.75
7.00
The natural hairs
in sable brushes
retain high amount of color. The superior
spring and snap of sable hair produces
a controlled release of color as pressure
is applied. Fine points and sharp edges
allow painter to execute precise brush
strokes for detail oriented designs.
RB125-0
$3.00
RB125-2
3.00
RB125-4
3.00
RB125-6
3.00
RB125-8
3.05
RB125-10
3.60
RB125-12
4.00
RB250 Golden Taklon Round Detail
RB250-20/0
RB250-10/0
RB250-5/0
RB250-4/0
RB250-3/0
RB250-2/0
RB250-0
RB250-1
RB250-2
RB250-3
RB250-4
RB250-5
RB250-6
RB250-8
RB250-10
$2.50
2.50
2.50
2.60
2.70
2.80
2.90
3.05
3.30
3.50
3.60
3.85
4.25
6.25
6.95
RB595 Golden Taklon Liner
RB595-20/0
RB595-10/0
RB595-5/0
RB595-0
RB595-1
RB595-2
RB595-4
RB595-6
RB595-8
$3.00
3.00
3.00
3.00
3.25
3.40
3.90
4.60
6.20
RB775 Soft Oxhair Glaze
Golden Taklon Brushes
Premium quality golden synthetic brushes
offer resilience, point and edge. Designed to perform like fine natural sable at
an economical price.
RB775-12
RB775-34
RB775-1
½”
¾”
1”
$2.05
2.50
3.05
RB-150 Golden Taklon Shader
RB150-20/0 $3.00
RB150-0
3.00
RB150-2
3.00
RB150-6
4.05
RB150-8
4.55
RB150-10
5.00
RB150-12
5.95
RB150-14
6.90
RB150-16
8.05
RB150-18
9.20
RB150-20 10.35
RB585 Golden Taklon Script Liner
RB585-20/0
RB585-10/0
RB585-5/0
RB585-0
RB585-1
RB585-2
RB585-4
RB585-6
$3.00
3.00
3.00
3.00
3.25
3.40
3.90
4.60
RB900 Camel Oval Mop
RB900-12
RB900-34
RB900-1
½”
¾”
1”
$2.75
3.40
4.15
China Mop
RB9314S
RB9314M
$3.30
4.40
Camel Hair Brushes
These brushes are constructed of a
variety of animal hair (not hairs from a
camel). This soft natural hair is perfect
for blending and dusting.
RB750 Firm Glaze
RB750-12
RB750-34
RB750-1
½”
¾”
1”
$2.05
2.50
3.05
105
Brushes
Royal Brushes (Continued)
White Natural Hair Brushes
This stiffer bristle (RB825, RB998) allows
for maximum distribution of color as well
as control of color and direction. The
softer white goat (RB835) bristle allows
for more delicate blending.
RB825 Stiff Fan
RB825-2
$2.05
RB825-4
2.50
RB825-6
2.85
RB825-8
3.30
RB825-10
4.95
RB825-12
6.05
RB835 Soft Fan
RB85-2
RB85-4
RB85-6
RB85-8
$2.05
2.50
2.85
3.30
Duncan Brushes
Duncan Red Sable Signature
Brushes
Clear Acrylic Handles
These brushes are made of 100% pure
red sable hair. Sable hairs are longer than
other animal or man-made hairs, enabling
the brush to hold color without dripping.
They hold a very fine point for finer, more
extended strokes.
Detail
Fine features, dolls’ faces, small lettering,
delicate shading, and slender line work.
SB801
2/0 Liner
$ 4.05
Liners
Full-flowing, decorative lines, lettering,
features, wash techniques & fine banding.
SB802
#1 Liner
$ 4.45
SB803
#4 Liner
9.30
Shaders
Shading, lettering, ribbon effects, varying line widths, banding,
and drybrushing.
SB804
#4 Shader
$ 4.70
SB805
#8 Shader
7.50
SB809
#6 Shader
6.60
SB810
#10 Shader
10.35
Round
For smooth application of solid color,
tole & shaded designs, & painting small
areas.
SB806
#6 Round
$11.00
SB808
#4 Round
8.15
SB811
#8 Round
12.15
SB812
#10 Round
15.30
106
Fan
For applying glaze or color over
large areas, and creating lightly
feathered strokes.
SB807
Fan Brush
$12.45
Glaze
SB813
1”
$16.55
Duncan Discovery Brushes
Clear Acrylic Handles
These brushes are versatile basics to discover
the fun of ceramics. There is a wide range
of brush tips and they’re a great value for the
cost-conscious artist.
Detail Brushes
Use with underglaze to achieve delicate
shading, small lettering, fine features, & line
details; great for hard-to-reach areas.
BR520
2
$ 3.00
BR570
2/0
$ 3.00
BR582
5/0
2.29
BR596
7/0 (short handle)
2.25
Liner Brushes
For decorative or full-flow lines, features,
washes, & banding with translucent
underglazes.
BR601
10/0 Liner
$ 350
BR571
#4 Liner
4.35
Shader Brushes
For varying line
widths, ribbon
effects, lettering,
shading, banding, & dry brushing with
underglazes.
BR572
3/16” Shader
$ 3.40
BR573
3/8” Shader
4.45
BR531
1/4” Sabeline
3.20
BR532
1/2” Sabeline
4.85
Angular Shader Brushes
For the same use as
the Shaders above, with
the difference being that
the angled tip reaches corners & hard to
reach areas.
BR602
½” Shader
$ 6.00
BR603
¼” Shader
4.85
Dry Round
For underglaze,
multicolor shading, drybrushing, banding,
and varying strokes.
BR574
#6 Dry Round
$ 3.00
Finest white bristle
brush stock. For floral
designs, textures, patterns, shading, banding, & drybrushing
underglaze.
BR575
#3 Fan
$ 2.90
Oval Mop
For applying glaze or underglaze to broad areas.
Serves the same decorative purposes on
a larger scale as the BR576 Glaze brush
above.
BR588
#10 Oval Mop
$ 4.25
Overglaze Brush
Mother of Pearl Brush
Especially designed for applying Mother
of Pearl Overglaze to fired glaze surfaces.
BR594
#12 M.O.P.
$3.75
Glaze Brushes
For overall coverage of
glaze & opaque underglaze, large patterns,
and designs.
BR593
¾” Economy
BR576
¾” Premium
$ 3.40
4.55
Round Brushes
For loading &
tipping techniques in tole painting, for
bold designs, scrollwork, lettering, shading, and banding.
BR529
#4 Sabeline
$ 2.55
BR530
#8 Sabeline
3.95
BR585
#6 Sabeline
3.20
BR551
#3 Round Opaque
2.55
BR552
#5 Round Opaque
3.10
BR553
#8 Round Opaque
3.80
BR604
#10 Round Opaque
6.85
BR605
#12 Round Opaque
7.95
Flat Opaque
Bristle
Brushes
White bristle for large, smooth areas, lettering, drybrushing, and shading.
BR554
#1 Flat Opaque
$ 3.00
BR555
#3 Flat Opaque
3.35
BR556
#5 Flat Opaque
3.00
BR557
#8 Flat Opaque
3.20
BR606
#10 Flat Opaque
5.75
BR545
3/4” Flat Translucent
3.95
Brushes
Beginner Brush Sets
Royal offers a vast selection of school grade
brushes at economical prices. They are ideal
for the beginner student, crafter or hobbyist.
Sets are packaged with different shapes.
Golden Taklon Brush Sets
These are the most popular style of brushes
for use with all types of paints. These brushes
are highly absorbant, durable and versatile.
White Bristle Brush Sets
Rounds 1,3 5; Flats 2, 4, 6 - short
handles
RBF
7.99
Flats 1, 3, 5, 8
RBG
5.99
Rounds 1, 3, 5, 8
RBH
5.99
Rounds 1, 3, 5, 8; Flats 1, 3, 5, 8
RBN
11.90
RBC
RBE
RBJ
RBK
RBRG7
AMDETAIL
RBTK7
Mixed Sable/Bristle Sets
Detail Round 3/0; Pointed Rounds 1, 5;
Shader 6; Bristle Round 5;Bristle Flats
2,6
RBI
6.99
Royal Natural Hair Sets
These natural hair brush sets have been
carefully selected to accomodate the
needs of the artist, crafter, ceramic artist
and hobbyist. Choose from sets for a
variety of purposes and techniques.
RBL
RBM
Fine Sable and Camel Hair Brush
Sets
Pointed Rounds 1, 3, 5; Glaze 5/8”
RBC
3.99
Shaders 2, 6, 10
RBE
3.99
Detail Rounds 3/0, 2/0, 0;
Pointed Rounds 1, 3, 5; Shaders 2, 6, 10;
Glaze 5/8”
RBJ
8.99
Same as RBJ with short handles
RBK
8.99
Shaders 2, 4, 6, 8, 10
RBL
5.99
Rounds 1, 3, 5, 7, 9
RBM
5.99
Rounds 1, 3, 5; Flat 5/8"
RBU
3.99
RBTKC
RBTKD
10/0, 5/0, 3/0, 0, 1, 3, 5 Details
RBAMDETAIL
RBTKE
20.95
3/4” Wash; 2, 6 Shader; 1/4” Angular;
2 Filbert; 5/0, 1 Liner
RBRG7
22.95
3/4” Wash; 8 Shader; 5/0, 0, 5 Rounds;
2 Script
RBTK7
22.95
1, 3, 5 Pointed Rounds
RBTKC
5.30
1, 3, 5 Pointed Rounds; 5/8” Glaze;
2 Shader
RBTKD
5.99
3/0, 2/0, 0 Detail Rounds; 1, 3, 5 Pointed
Rounds; 2, 6, 10 Shaders; 5/8” Glaze
RBTKJ
11.99
2, 4, 6, 8, 10 Shaders
RBTKL
144 Brush Sets
225-5/0, 3/0, 0, 1, 3, 5
RBDETAIL Sable Detail
12.60
355-1, 3, 5, 8; 455-1, 3, 5, 8
RBVL Dry Brush
17.95
775-1/2”, 3.4”; 1”
RBY Glaze Soft Ox Hair
900-1/2”, 3/4”; 1”
RBX Camel Mop Set
7.60
10.30
Big Kids Choice
Brushes
Brightly colored translucent
acrylic handles. Short thick
handles for a comfortable and
easy grip. Better quality taklon
for fine points, sharp edges and
resilient spring. No paint to chip
off handles.
6-Piece Beginner Set
Shader #6, Liner #10/0, Angular
1⁄4”, Round #4, Filbert # 2, Glaze 5/8”
RBBK601
$ 8.99
7.99
Handle
# in Set
Price
RBCAN1
SFT CAMEL HAIR - 24 each Rounds 1 2 3 4 5 6
Asst
144
57.99
Wood handles, aluminum ferrule
RBECN-COMBO144 CAMEL HAIR - 6 Round: 2,4,6,8,10,12/6 Flat:1,3,5,8,10,12 Green
144
99.99
RBECN-COMBO6 Green
144
79.00 RBECT-COMBO144 GOLD TAKLON - 6 Rounds: 2,4,6,8,10,12/6 Flats:1,3,5,8,10,12
Dk blue
144
129.99
RBECT-COMBO6 GOLD TAKLON - 3 Rounds: 1,3,5/3 Flats: 4,6,8
Dk blue
144
99.99
RBECB-RND144 BRISTLE - 24 Ea. Rounds: 0,1,3,5,8,10
Pink
144
99.99
CAMEL HAIR - 3 Round: 1,3,5/3 Flats: 4,6,8
107
Modeling Materials
Modeling, Sculpting, Mold Making, Casting Building Materials
We are pleased to have expanded the section on building materials to meet the needs of our customers. These materials come in various
forms; liquid, powder, moist, solid, etc., and their working properties vary widely. We have grouped them loosely by their type and use.
However, since these materials are versatile, a material listed under one category may also be used in another way and for another
purpose. For example, a mold making material may also be a casting material. Read this section fully to find the material which might do
the job for you. The information in this catalog is only meant as a guide to their use since the materials are so varied, complex and versatile. To help you further, we are adding to our book section and are open to any suggestions regarding books you have found valuable
in the use of these materials. Most products have basic directions included on the label. The manufacturers of Sculpey and Celluclay
have published excellent step-by-step booklets, which we carry. The products listed in this catalog are sold without warranty, express or
limited and upon condition that purchasers shall make their own tests to determine the suitability of these products for their particular use.
Safe and proper use of materials. We encourage the careful and proper use of all the materials in this catalog. Ventilate the work
area properly to avoid inhalation of fumes and dusts, which might be produced while working. Do not eat or smoke while working. Not
all materials are intended for use by children. Read the label carefully and use only the materials labeled NONTOXIC with children.
In general, KEEP OUT OF REACH OF CHILDREN. See index for additional health and safety information for products in this catalog.
Self-Hardening Modeling
Materials
Moist, pliable, ready to use, self-hardening and/or oven baked water-based
compounds. (need no kiln firing).
May be decorated with Bisque stains,
See “Non-Firing Colors” in Index.
Air Dry Clay – (moist)
This self-hardening, fine water clay dries
bone hard. Specify gray, red or white.
NONTOXIC
910-GY-25
910-RD-25
910-WH-25
25 lb.
25 lb.
25 lb.
16.75
17.50
16.00
910-GY-50
910-RD-50
910-WH-50
50 lb.
50 lb.
50 lb.
26.75
27.75
25.75
Sculptamold – Self-Hardening
(dry)
Combines the best features of and hardens like “clay-plaster and papermache.”
Prepare this white compound by adding
water. Sets in 30 minutes. Will cling to
almost all-clean surfaces including glass.
Does not shrink, so apply to armatures
or any cores without fear of cracking.
Light-weight, strong and durable, finished
pieces may be carved, sanded and sawed.
SCULT-3
3 lb.
$ 7.99
SCULT-25
25 lb.
49.95
SCULT-50
50 lb.
94.95
Plastercraft Rigid Wrap
Plastercraft (formerly Pariscraft)
Great for Schools. 20 lbs. of plaster coated
gauze. Comes in random lengths.
PLASCR
$70.00
108
Rigid Wrap and Pariscraft
Rigid Wrap
(plaster-impregnated bandage)
High-strength gauze impregnated with
plaster. Soak in water to make sculpture
or craft projects. Follows any curve, sets
in 5 minutes. Will also create the rigid support needed for flexible molds (i.e. Imagel,
Latex, Silicon, etc.)
Rigid Wrap (roll)
Can microwave 3-4 minutes to harden.
RIGDWR1 4"x180"
1-lb. roll $6.30
Oil-Based, Modeling Clays
Roma Plastelina
Jolly King Plasteline
Another fine quality, soft, smooth, pliable
plasteline. Reusable. Requires no heating. Specify color: gray-green or terracotta.
NONTOXIC
912-TC-1
1 lb.
2.50
912-GG-1
1 lb.
5.00
912-GG-5
5 lb.
27.00
Carving & Modeling Wax
Carving Wax (solid)
Make master sculptures for reproduction
with this excellent carving medium. Can be
sculpted right from the block or melt blocks
together to create different proportions.
Carves easily with simple tools. Sculpt
intricate details.
CARVWAX
Per pound
$ 13.29
The finest oil-based clay for use in portraits,
heads, busts, etc. Pliable yet sufficiently
waxy and firm to carve fine details and
form smooth surfaces. Color: gray-green.
Microcrystaline Wax (solid)
NONTOXIC
No. 1 Soft – Extremely pliable. Used for Works and carves similar to soft clay. Easmaking large sculptures. Is easily scraped ily adheres to itself. Used both for direct
modeling and casting in the lost wax profrom molds.
No. 2 Medium – Generally used for portrait cess. Clean burning. Light brown.
1 lb.
$ 16.00
heads, busts and figure work. Stronger MWAX-1
10 lb.
90.00
than No. 1 but works smoothly and is the MWAX-10
favored consistency.
No. 3 Medium Firm – Used in making
Beeswax
models of smaller objects.
No. 4 Extra Hard – Used in making A very fine, smooth, natural wax with a
detailed objects, such as medallions. unique texture for advanced modeling and
for dressing wood sculptures.
2 lbs.
Case/20*
BEESWAX
1 lb.
$ 24.00
913-1
Soft
13.20198.00
913-2
Medium
13.20 180.00
913-3
Med. Firm
9.50 190.00
913-4
Extra Hard 11.55 231.00
*Case contains 20 2-lb. pieces.
Casting & Mold Making Materials
Casting Materials
Latex Thickening Agent (powder)
Casting Latex L-200 Slip
Cures to a flexible rubber. A superior prevulcanized, latex casting slip for the production of hollow-molded rubber articles;
toys, imitation pottery, masks, puppet
heads, display articles, flexible props, etc.
Latex slip builds up like clay slip when
poured into a #1 Pottery Plaster mold.
L200P
1 pt.
$ 9.80
L200G
1 gallon
59.30
L200G-5
5 gallon
275.20
#64 Filler (liquid) (for Latex L-200 Slip)
The more filler added, the more rigid the
L-200 Latex will become.
64FIL5G
5 gallon
160.00
Permastone
The ideal casting compound when permanent break-resistant castings are desired.
If broken accidentally, the fracture is clean
and easily glued. Can be painted with
acrylics, oils, watercolors, tempera or any
other finish. Mixes easily with water, reproduces the finest detail, sets in 30 minutes.
PERMA-28 28-oz. canister
$ 6.70
PERMA-48 48-oz. bag
11.00
#1 Pottery Plaster
914SP-5
914SP-25
914SP-50
6.00
24.32
17.50
Flexible Mold Making
Good for Props, Puppets, Models and
whenever a flexible object is required.
Mold Making Latex #660 (liquid)
Ready to use. Needs no mixing or preparation. Molds are made by painting, brushing
or spraying. Since it is a prevulcanized
latex, finished molds need no oven curing. Practically any object can be cast
in these latex molds and retain even the
finest detail. Shrinkage is approximately
½ - 1%. Due to its strength and plasticity,
many castings can be made from one mold.
Molds can be stored indefinitely and be
used when needed.
660P
pint
$ 9.80
660G
gallon
58.95
660G-5
5-gallon
263.80
This specially formulated CECO powder
will thicken mold latex without clumping.
Improves the strength of the rubber and
its resistance to degradation by the casting
materials and reduces its stretch. Suggest
add 10% to latex after 6th or 7th coat.
CECO-1
1 lb.
$13.36
CECO-5
5 lbs.
44.15
Mix-A-Mold (powder)
Make a rubbery, flexible mold in just two
minutes. Easier than ever before. Make
perfect reproductions of three-dimensional
objects. Picks up every detail. Fill the finished Mix-A-Mold with Sculptamold, plaster
or any other casting media. Just mix with
water. NONTOXIC
MXMOLD-12
½ lb.$14.95
MXMOLD-212 2½ lb.
42.95
Retarder, Hardeners and
Surface Coatings
CMC Gum (powder)
Surface coating and suspension agent.
See Index for more information.
CMC-1
1 lb.
16.04
CMC-5
5 lb.
59.00
Release/Separating Agents
Plaster Release
Wipe or brush onto gypsum (plaster.)
Mold Soap (liquid) NONTOXIC
918G
918G-5
918 pint
gallon
5 gallons
WAX Resist (liquid).
WAXP
WAXG
Smooth-On Inc.
Smooth-On’s Brush-On™40 is a
mold rubber (urethane) that’s extremely
versatile, abrasion resistant and has a
high tear strength. It has the convenience of a one-to-one mix ratio and
is easy to mix and apply with a brush
or spatula. Brush-On™40 paints onto
vertical surfaces without sagging and
will cure with negligible shrinkage to
a durable rubber that lasts in production. Will capture exact detail from any
original model. Suitable for reproducing
sculpture, architectural restoration and
production casting of concrete.
BRUSHON40P
$29.48 Pint
Smoothcast 300 is an ultra-low vis-
cosity casting resin that sets bright white
and virtually bubble free. It offers the
convenience of a one to one mix.
rFully cured castings are tough, durable,
machinable and paintable. They resist
moisture and mild solvents. Applications
for Smooth-Cast Liquid Plastics include
reproducing small to medium size
sculptures, cold cast bronze castings,
making prototype models, special effect
props and decorative jewelry.
SMOOTHCAST300P
$23.60 Pint
pint
gallon
$ 3.95
13.00
52.00
$ 5.25
$32.86
Latex Mold Release
For Rubber Molds. Gives a long lasting
slick surface on the mold and prolongs the
life of the rubber.
LATREL-14 14 oz.
8.50
Portland Cement
For casting (to yield 3 cu. ft. of casting
material): -mix 1 bag cement with 2 bags
Mason Sand add 3½ - 4 gallons water.
Test for desired results. Allow for shrinkage. For casting into gypsums, use mineral
oil as a separator.
For sculpting: Add approx. 3 gallons water
to 94-lb. bag of cement to make a putty
type material called “Neat” cement. Let
set about 1 hour to preshrink; remix adding
more water if needed. Test. Can also be
used as a glaze ingredient.
PCEMENT Type #1, 94-lb bag $18.00
MSAND Mason Sand, 80-lb. bag 4.00
109
Fusible Glass
COE 96 Glass from Creative Paradise
Glass Pendant Kits
CPPK3
2” Circles - White & Clear
24.00
CP-BG
Dichroic Blue/Green
2”x2”$8.00
CPPK5
2” Crosses - White & Clear
24.00
CP-BM
Dichroic Blue/Magenta
2”x2”8.00
CPPK6
2” Crosses - Black & Clear
24.00
CP-CC
Dichroic Cyan/Copper
2”x2”8.00
CPPK7
2” Ovals - White & Clear
24.00
CP-CG
Dichroic Cyan/Gold
2”x2”8.00
CPPK8
2” Ovals - Black & Clear
24.00
CP-FIB
Dichroic Fibroid
2”x2”8.00
CPPK9
1.5” Ovals - White & Clear
24.00
CP-LGDOT Dichroic Large Dots on Black
2”x2”8.00
CPPK10
1.5” Ovals - Black & Clear
24.00
CP-SMDOT Dichroic Small Dots on Black
2”x2”8.00
CPPK11
1.5” Crosses - Black & Clear
24.00
CP-MRQS
Dichroic Marquis on Black
2”x2”8.00
CPPK13
1” Hearts - Red & Clear
24.00
CP-RAD
Dichroic Radium
2”x2”8.00
CP-RIP
Dichroic Ripple
2”x2”8.00
DG-BOX
Dichroic Box Pattern
2”x2”8.00
Bracelet Kits
DG-BRICK Dichroic Brick 2”x2”8.00
You do the cutting! In this kit you will find the glass for bases, bridges
DG-CLAVA Dichroic Cool Lava
2”x2”8.00
and caps as well as the fiber paper, stretchy cord, beads and design
DG-RS
Dichroic Red/Silver
2”x2”8.00 elements to craft TWO bracelets per kit.
DG-SMSQ
Dichroic Small Squares
2”x2”8.00
Jungle Bracelet
Zebra Bracelet
CP-CIRCLE8 Clear Glass Circle
8” dia. 10.75
CPBASIC
Basic Assorted Glass Bits
1 lb.12.00
CPCLEAR Clear Glass Bits
1 lb.8.00
CPDICHRO Dichroic Glass Bits
4 oz.30.00
CPTRANS Transparent Bits Assorted Colors1 lb.
12.00
CPEXOTIC Exotic Assorted Glass Bits
1 lb.14.00
CP-JUNGLE $30.00
CP-ZEBRA $25.00
CPGL001-4 Clear Glass
4”x4”2.50
CPGL024
Clear Glass Hi-Fire Irridescent 1 sq.ft.17.00
CPGL027
Black Opaque Glass Thin
1 sq.ft.9.80
Bailings
CPGL073-4 Clear Glass Double Thickness 4”x4”2.06
COE 96 Fusible Glass Variety Pack
A great starter set for fusers! This pack has enough glass to create more then 24 six inch square bowls, countless exotic pendants and more! All of the glass in this kit is compatible for fusing.
2 Sq. Ft. ea. = Black, White, Thin Clear, Std Clear Two 6”x6”
Streaky Spirits Two 6” x 6” Swirly Opal Arts One each 6” x 6”
opaques =Yellow, Lime, Red, Cobalt, Orange, One each 6” x 6”
transparents=Red, Pale Amber, Med. Amber One tube each variety Stringers, variety Noodles 2 each rods of Yellow, Red, White
and Black. Includes basic fusing instructions.
CPVARIETYPACK
$242.00
Dichroic Glass Glitz Kit
Gorgeous dichroic glass pieces: 1 texture clear, 3 patterns & 3
solid.COE 96 Glass for fusing.
DICHRO-KIT$55.00
“Black Magic” Kit
COE 96 Glass for Fusing
2 – 4” x 4” thin black glass, 2 – 4” x 4” clear glass, 2 - 3” Clear
dichro-noodles, 1 – 2 square inches of green/magenta on black
dichro sheet, (jewelry findings sold separately)
BMGK$25.00
“Crystal Dreams” Kit
Glass for Fusing–Great for Jewelry
All COE 96 Glass:
2- 4”x 4” thin clear, 1- 4”x4” opaque blue, 1- 4”x 4” clear iridescent aqua, 1- 4” x 4” clear iridescent pink, 2- 3” Clear dichro
noodles. (jewelry findings sold separately)
CDGK$25.00
Glass Frit - 96 COE Tested Compatible
CPTG001
FRIT-KIT
Glass Frit - Coarse Clear
64 oz.$60.00
8-oz. Units of 14 Different Colors
112.00
SILPLBAIL
Silver Plated Bailings
$17.00
Kiln Shelf Paper
Sheets of kiln shelf paper. Used as a fusing surface, eliminates the
need for shelf wash under glass.
THICKPAPER
THINFIRE
Thick Shelf Paper - 10”x10” $10.00
Thin Shelp Paper - 20”x20”8.00
Weave Bars
Earthenware bars designed to create waved
strips of glass for weaving. To use these
bars, apply a quality glass separator such as
Mold EZ. Space the bars 1/2” apart on thin
fire paper on a kiln shelf and lay 1/2” wide
glass strips across the bars. Slump the glass
to create waved pieces of glass. After cooling, flip every other strip of glass to create a channel in the strips. Run
1/2” pieces of glass through the channels to create a lose woven pieces
of glass. Heat the lose woven pieces of glass on Thin Fire paper in a kiln
to 1300 degrees at 400 degrees per minute and hold for 10 minutes to
tack fire the woven glass together. If desired, slump the woven glass in
GM19 Sushi Slump.
CPGM24
Weave Bars - 6”x1.5x.5 (4) $20.00
Glass Tools
Morton Mini-Grid Cutting Surface
MINI-GRID
14.5” x 22.5”$24.00
Steel Tip Glass Oil Cutter
PENCUT
Glass Cutter$19.95
Mosaic Nippers
MOSAICNIPPER Glass Mosaic Nippers$24.00
Glass Release
MOLD-EZ
110
25/pack
Glass Release - Makes 12 oz.$14.00
Fusible Glass
Texture Pads for Glass Firing
Geo Grid Textured Tile
7” x 7” grid textured earthenware tile. Used
for adding grid texture to glass during fusing. Treat tile with glass separator and place
under glass during normal fusing procedure.
Texture will remain after slumping. Use to
texture glass for jewelry, bowls, windchimes
and more!
Rose Texture Pad
7” x 7” Rose textured earthenware tile.
Used for adding rose texture to glass during fusing. Treat tile with glass separator
and place under glass during normal fusing
procedure. Texture will remain after slumping. Use to texture glass for jewelry, bowls,
windchimes and more!
CPGX01 Rose 7”x7”
CPGX07 $17.00
Mosaic Texture Pad
Mosaic - 7”x7”
CPGM02$30.00
$17.00
Wave Texture Pad
Wave - 7”x7” $17.00
Rectangle Sushi
$17.00
Textured earthenware tile designed for texturizing glass during firing. 9” x 9” Treat tile
with glass separator and place under glass
during normal fusing procedure. Texture will
remain after slumping. Use to texture glass
for jewelry, bowls, windchimes and more!
4 Patterns - 6”x6”
4’ TILE MOLD
$23.00
Top quality earthenware mold designed to
create delicious deep 4” x 4” glass tiles. Treat
with top quality glass separator before firing
with glass.
CPGT04
7” x 7” Tooled leather textured earthenware
tile. Used for adding tooled leathertexture
to glass during fusing. Treat tile with glass
separator and place under glass during normal fusing procedure. Texture will remain
after slumping. Use to texture glass for jewelry, bowls, windchimes and more!
Tooled Leather - 6”x6”
Top Quality earthenware mold
designed to slump glass. 5.5”
x 11.5” rectangle with subtle
angle. Apply top quality glass
separator before firing with glass.
CPGM19$45.00
Tooled Leather Texture Pad
CPGX06
Top quality earthenware mold to use
when slumping a wine
bottle to form a lovely
dish. Apply a top quality glass separator to
mold before firing with glass. Bottle can be slumped flat on treated kiln shelf before slumping in mold or bottle can be slumped
in mold as is.
CPGM17$29.00
Hot Patterns Texture Pad
CPGX05
Round Fired Earthenware Slump 7.5”
dia.
Wine Bottle Slump
7” x 7” Rose textured earthenware tile. Used
for adding rose texture to glass during fusing. Treat tile with glass separator and place
under glass during normal fusing procedure.
Texture will remain after slumping. Use to
texture glass for jewelry, bowls, windchimes
and more!
Harlequin (Diamond) - 6”X6”
Round Slump
CPGM04$30.00
Harlequin Texture Pad
CPGX04
Slump Molds for Glass
Large Square Earthenware Slump For
Glass 7” square.
7” x 7” wave textured earthenware tile. Used
for adding rose texture to glass during fusing. Treat tile with glass separator and place
under glass during normal fusing procedure.
Texture will remain after slumping. Use to
texture glass for jewelry, bowls, windchimes
and more!
CPGX03
$17.00
Large Square Slump
7” x 7” mosaic textured earthenware tile.
Used for adding rose texture to glass during fusing. Treat tile with glass separator
and place under glass during normal fusing
procedure. Texture will remain after slumping. Use to texture glass for jewelry, bowls,
windchimes and more!
CPGX02
Geo Grid - 6”x6”
$24.00
Floral Former
Small Floral Former 3.5” Tall
CPGM10$15.00
Heart Slump
Earthenware heart-shaped slump - 7” LongS
$17.00
CPGM20$30.00
111
The Microkiln, Packing Materials & Adhesives
The Microkiln
Spectrum Multipens
Now you can fire glass, ceramic, and precious metal in 5 to 10 minutes in your own
kitchen. All you need is a microwave oven
and our revolutionary microkiln.
Liquid enamel pens. For use on glass,
ceramic, and metal:
Easy to use
Fires at 1400-1550 degrees F
(750-850 degree C)
Lead Free
Non-Toxic
Dinnerware Safe
Dishwasher Proof
Colors intermixable
2-oz. Multipens:
Available in two sizes:
MK-MED Medium Microkiln $135.00
MK-SM Small Microkiln
$99.00
SizeDimensions Small Inside
Small Outside 70mm w x 40mm h 120mm w x 85mm h Medium Inside
Medium Outside
110mm w x 45mm h 170mm w x 87mm h
How to use:
1)Place a piece of kiln fiber paper on top
of the base of the kiln to stop sticking.
2)Place glass, ceramic or metal piece
which has been decorated with Multipens onto the fiber paper.
SP3101
SP3102
SP3106
SP3112
SP3115
SP3116
SP3125
SP3128
SP3130
SP3132
SP3133
SP3136
SP3152
SP3156
SP3163
SP3165
SP3167
SP3168
White$11.95
Ivory11.95
Bright Yellow11.95
Walnut Brown11.95
Black11.95
Charcoal11.95
Lime Green11.95
Chartreuse11.95
Hunter Green11.95
Sky Blue11.95
Turquoise11.95
Bright Blue11.95
Rose11.95
Light Green11.95
Bright Orange11.95
Bright Purple11.95
Fire Engine Red11.95
Christmas Red11.95
Glass Tools
3)Place the microkiln base in the microwave, then place the microkiln cover on
the base.
Morton Mini-Grid Cutting Surface
4)Switch on the microwave for the
required period (see table in operating
instructions). Put on gloves or oven mitts
as the kiln will now be hot.
Steel Tip Glass Oil Cutter
Glass Cutter
PENCUT$19.95
5)Place the kiln on a heat resistant
surface.
Mosaic Nippers
6)After cooling for approximately 20
minutes remove the piece from the kiln.
Cooling duration may vary. Please wear
gloves when initially handling the piece
for safety.
WARNING The inside of the kiln gets up
to 1650 deg. F (900 deg. C) when firing.
Although the kiln is very well insulated,
the outside still gets hot so use care and
gloves to remove it from the microwave.
Place the hot kiln on a heat resistant
surface.
112
14.5” x 22.5”
MINI-GRID$24.00
Glass Mosaic Nippers
MOSAICNIPPER$24.00
Glass Release
Glass Release - Makes 12 oz.
MOLD-EZ$14.00
Packing Materials
Air-Bubble Cushioning
The perfect reusable packing
material. Highly protective,
light weight, strong, & clean
(no more picking up loose
Styrofoam packing “peanuts”!). Each
handy carton contains a sheet of bubbles
12” wide by 175’ long (175 sq. ft.). Sealed
air-bubbles are 3/16” high and are crossperforated every 12 inches. Each carton
is a handy cardboard dispenser. Can be
shipped by UPS. Order No.175 linear ft
per ctn.
SPCLD1
Ea. carton
$54.50
Plastic Shopping Bags
Medium-duty plastic shopping
bags. 12” x 16”. (T-Shirt style)
SHOPBAG Each $.07
Polybags - 1-1/2 mil
Medium-Duty
Good for packaging small items.
Size
Each
PB15-26
2” x 6”
$1.49
PB15-58
5” x 8”
1.99
PB15-69
6” x 9”
2.79
PB15-812 8” x 12”
3.79
Heavy-Duty
For moist or dry clay & chemicals.
PB17-21
17” x 21”.50 Each
Adhesives
E6000™ Adhesive/Sealant
Holds super tight on all woods, metals,
concrete, masonry, ceramics, rubber,
fiberglass, glass, & plastics. Works like a
contact cement. The accessory spout can
be trimmed for more precise application
of glue.
E6000
3.7-oz tube
$9.01
E6000S
Accessory Spout
.75
Storage & Ware Accessories
Storage
White Pump Top
Small Plastic Storage
Containers
With resealable lids
CONT8
CONT16
CONT32
CONT86
8 oz.
16 oz
32 oz
86 oz
Ea.
$.35
.40
.50
3.75
Plastic Jars & Buckets
High-quality, impact resistant
plastic. The cork color on the
pump has a 1¼” top diameter
and a 1" bottom diameter. The
original pump has a separate
collar that fits any 1” O.D. neck.
The pump then screws into collar. Overall length of pump is 7". Pump
tube can be cut for a custom fit.
PF002
White Pump Top
$ 2.00
PF002C Pump Top with Cork
2.15
Well-made, sturdy storage containers for all your ceramic
needs. 2.5 gal. and 3.5 gal.
buckets come with locking lids.
PTJAR
Pint jar with lid
1.30
GLJAR Gallon jar with lid
2.65
5GLBKT 5-Gal bucket w/lock lid 16.00
3.5GLBKT 3½-Gal bucket w/lid
14.00
Ware Accessories
Fountain Pump
Indoor Submersible
Create your own fountain
design or install in Kimple’s
or Scioto’s new fountains.
Pumps have adjustable flow.
Includes 6' underground cord set. Pump
measures 2-¼”x2-¼”x1-¾”W. Maximum
water height is 1.8'. Pumps 66 gallons
per hour.
PUMP-IN
Fountain pump indoor $21.50
PUMP-WALL Fountain pump wall fntn 22.13
PUMP-TUBE Fountain pump tubing
.74
Water Globe
Make your own glitter
globe. Display ceramic
figurines, collectibles
and more in a unique
manner. Crystal-clear
Shown without
glass globe sits atop
base
an attractive colonial
maple-finish base. All globes include
a rubber-sealing gasket. Use silicone
adhesive. Instructions provided upon
request with purchase. Globe measures
4¾” diameter with a 2¾” opening. Height
including base is 6".
Each
GLOB
17.80
GLOB1 Globe & gasket alone 13.90
Drifting Bits
Metal Candle Cup
Fits standard wax candles. Measures 1-1/8” H x 15/16” diameter.
CCUP
$ .45
Night Light
Use epoxy to affix nightlight to
ceramic nightlight casting. Put
multiple holes in casting for light to shine
through.
PF102
2.43
Honey Dippers
Use to add color
Cleverly designed in wood,this
and motion to
no mess honey server is a perwater globes. A
fect finishing touch for porcelain
package is approximately 1 tsp. and is
or ceramic honey pots. 6 - 7”
enough for one (1) water globe.
long
Ea. Ea./12Ea./24 HONEYW Wooden
GLBIT1 white (snowflakes)
$1.20
GLBIT2 irid, white glitter
1.10 .99.88
GLBIT3 black bats (1,000 flakes)
5.99 5.394.79
Thermometer
1.99
Indoor/outdoor thermometer is glass with
o
red liquid. Positional mark at 70 F points
lines up with positioning mark on molds.
Mount with silicon glue.
THERMOEach
1.75
Plastic and Rubber Stoppers
Plastic Stoppers
Pure, clean, translucentwhite polyethylene stoppers
with tapered sides for a good
fit.
PS622
PS628
PS632
PS640
PS644
PS648
PS650
PS654
PS662
PS666
PS670
PS678
PS680
Size
Each
8/16"
⅝"
¾”
1"
1⅛"
1½”
1-5/16"
1-7/16"
1-11/16"
1-13/16"
1-15/16"
2¼”
2½”
.16
.30
.35
.50
.60
.50
.69
1.32
.59
.56
.79
.88
.90
Red Rubber Stoppers
Traditional red stoppers
made of soft, flexible rubber.
Size
Each
RS600 ⅜" - 7/16" $ .36
RS601 7/16" – ½”
.46
RS602
½”
.80
RS603
⅝"
.55
RS604
¾”
1.03
RS613
⅞"
.70
RS605
1"
.80
RS607
1⅛"
.72
RS608 1¼” – 1-5/16" .89
RS609 1-5/16" – 1⅜" .97
RS610 1-7/16" – 1½” .96
RS611
1¾”
1.26
RS612
2"
1.75
White Rubber Stoppers
White, flexible synthetic.
Size
Each
RSW12
½”
.55
RSW58
⅝"
.40
RSW34
¾”
.58
RSW78
⅞"
.80
RSW1
1"
1.59
RSW118
1⅛"
1.64
RSW114
1¼”
1.50
RSW138
1⅜"
1.75
RSW112
1½”
2.08
RSW158
1⅝"
2.18
RSW134
1¾”
1.20
RSW178
1⅞"
1.42
RSW2
2"
2.72
RSW214
2¼”
2.59
RSW212
2½”
2.80
113
Ware Accessories, Plate Holders & Bowl Holders
Corks
Plate/Bowl Stands
Composition Cork Stoppers. High quality. Smooth.
Plastic Coated Plate and
Tapered for a good fit.
Bowl Stands
Top Dia. Bottom Dia.
Sturdy white plastic coated
CORK114 1-¼”
7/8"
$ 1.48
wire plate and bowl stands designed to
CORK112 1-½”
1"
1.95 safely cradle your ware at the right viewCORK2
2"
1-½”
3.65 ing angle. Available individually or in a
CORK212 2-½”
2"
4.38 pack/10 of a kind.
CORK3
3"
2-½”
5.10
Each
CORK312 3-½”
2"
6.70 Plate Stands
CORK4
4"
3-½”
9.90 PLSTSM
$4.09
Round and Bar Magnets
Powerful little 3/16” thick magnets to mount small items on
metal surfaces.
Each
MAG1
1" round diameter .65
MAG12 1/2” diameter
.32
MAG34 3/4” diameter
.38
MAGBAR 1/2”W x 7/8” L
.50
Magnetic Strip
Flexible magnetic strip with self-adhesive
back. Cuts easily with scissors.
MAGS
1’ x 1/2”
.60
10’ x 1/2” wide
3.60
MAGS100 100’ full roll x 1/2” W
24.00
Spring for nodders, 1/2" I.D. x 2" long.
SPRING
$.99 ea.
Bumpers for mount plate, pkg. of 10.
BUMP
$1.55
Cane Handles
Handmade of natural cane.
Each handle is unique; the
thickness will vary with the
size. Order by size. Specify plain (P) or
with knot (K).
Size
Plain
w/knot
CN4
4" plain
4.40
CN4K
4" w/knot
3.64
CN5
5" plain
3.74
CN5K
5" w/knot
3.75
CN512
5-1/2” plain 3.67
CN6
6" plain
3.50
CN6K
6" w/knot
4.25
CN7
7" plain
5.52
CN7K
7" w/knot
4.94
Bamboo Handles with
3.75
3.75
HANDLE6
HANDLE8
114
4"
5"
Wood Plate Stands
Wood easels with brass
finish hinges that allow adjustable width size. Walnut
(WAL) finish.
PLSTW5-WAL
PLSTW6-WAL
each
Maximum bowl size 8”
BST8 4”H x 5-1/2”W x 5-1/2”D $7.25
Maximum bowl size 12”
BST12 6”H x 6-3/4”W x 8”D
9.40
Maximum bowl size 15”
BST15 7”H x 10”W x 8-1/2”D
15.75
Maximum bowl size 20”
BST20 9”H x 13-1/4”W x 11”D 22.05
Plate Hangers
Sturdy spring-type hangers
with four prongs that clip onto
a plate or tile for almost invisible hold.
Size
Each
HANG5
5" – 7"
$5.50
HANG8
7" – 10"
4.25
HANG11
10" – 14"
6.22
Suction Cup Hanger
HANGSC
Wire Handles with wooden grips
PLSTVB12 6”H x 5-1/2”W x 4-1/4”D $6.25
Maximum plate size 14”
PLSTVB14 7-1/2”H x 7”W x 5-1/2”D 9.49
Maximum plate size 18”
PLSTVB18 9”H x 8-1/2”W x 6-1/2”D 9.95
Maximum plate size 22”
PLSTVB22 12”H x 11” x 8-1/2”D
12.35
FOLDST Folding plastic plate stand 5.00
Acrylic Bowl Holders
Rigid polished acrylic
stands that can be tabletop or wall mounted to
hold the heaviest bowls.
Predrilled holes in back
for mounting.
Canister gasket, foam style.
CANGASKET 4-1/2" dia. $1.89 Each
metal ends
HANDLE4 4"
HANDLE5 5"
Hinged Acrylic Plate
Stands
These decorative easels
are hinged for adjustable
width. Some sizes available
in Black (BK) and others in
Clear(CL).
Ht.
ea.
HPLST2-BK
2”
.85
HPLST312-CL
3-1/2” 1.55
HPLST5-BK
5”
1.91
HPLST512-CL
5-1/2” 2.39
HPLST734-CL 7 -3/4” 3.21
HPLST9-BK
9”
3.95
HPLST934-CL
9-3/4” 5.41
1.25
1.04
1 x 3/4”
Holds plates 9" – 12" CPLSTLG
Each
7.95
V-Back Stands for Large
Plates
Clear acrylic stands in sizes
to display those larger plates.
Maximum plate size 12”
Plate Stand 3”H x 3”W
PLSTMED
4.04
Plate Stand 4-½”H x 3-¾”W
PLSTLG
3.67
Plate Stand 6”H x 5-½W
Magnets
Clear Plastic Plate Stands
Holds plates 6" – 8"
CPLSTSM
Each
$ 6.90
5”
6”
Wire Easel Plate Stands
Plain and Twisted
Gold plated, heavy-gauge, wire
stands have ornate front “ball”
feet and non-skid, rubber-tipped
back feet. Holds tiles and
plates at just the right viewing
angle. Non-tarnishing finish.
Smooth Finish
Holds plates up to 7½” diameter.
EPLST1
3¾”H x 2½”W
4.21
Holds plates up to 12" diameter
EPLST2
5¾”H x 2½”W
3.95
Twisted Design
EPLSTTW3 3”H x 3”W
5.02
EPLSTTW4 4”H x 3-1/2”W
EPLSTTW6 6”H x 5”W
ea.
$5.19
6.15
$ .80
5.500
7.33
Tiles
Bisque (unglazed) off-white tiles can be decorated with underglazes and stains.
Item No.
T44B-1 T66B-1 Description 4 1/4”x 4 1/4”square - Unglazed
6”x 6”square - Unglazed
Each 1.42 2.48 Dozen Case*
Approx.Qty
86
43
Tiles shipped UPS, Parcel Post or common carrier; add packing charge of $3.00 partial case, $6.00 for full case. *Note: Cases are sold sealed, as
is, direct from the manufacturer. They have received the utmost care in handling; however, minor damage may be present on some tiles. If you
require all tiles to be perfect, please order by the piece or by the dozen so they can be checked. Cases cannot be returned, nor can damaged tiles
be replaced.
Woodenware Accessories for Tiles
Ornament Accessories
4BOX
6BOX
FRAME4
HINGE-OV
HINGE-RD
HINGE-SQ
Ornament Wire
Wooden Hinged Tile Box 4-1/4”$8.10
Wooden Hinged Tile Box 6”9.90
Wooden Trivet/Frame 4-1/4”3.62
Oval box hinge 2-7/16"x5/16"
5.50
Round box hinge 2-3/8"
6.75
Square box hinge 1-5/8" 5.50
Can be fired in the ware. Ideal for hanging
ornaments, bell clappers, beads, etc. Rated to C/6. Test for higher temperatures.
Gauge
Length
Price
BJW20 20
10'
$5.31
BJW24 24
10'
5.31
BJW30 30
20'
4.65
Rated to C/05. Test first for your needs.
HTS
24
10'
$3.39
HTW
17
10'
5.89
Christmas Tree Accessories
“U” Shaped Ornament Wires
Small Twist
2100
Medium Twist
2101
Medium Bird
2108
Small Pinlight
2106
Candle
2115
These ornament wires can be fired right
in your ornaments. Insert into damp greenware. Made of heat-tolerant nichrome
wire with a maximum temperature range of
2055°F. ¼” x ¾”
BHOOK
pkg. of 50
$7.25
Large Pinlight
2107
Bow
2117
Sm. Star
2202
Med. Star
2201
Large Star
2200
Plastic Reflector “Lights”
Name
Qty/Pkg
Sm Twist
144
Med Twist
144
Sm Pinlight
500
Lg Pinlight
500
Med Bird
90
Candle
90
Bow
80
Ornament stand to hang objects up to 9"
tall. Gold plated.
ORNSTAND1 11" high
$2.50
Ornament Hooks
Transparent, plastic reflector “lights” to be inserted into ceramic Christmas trees to let
brilliant, colored light sparkle through.
Specify color: Assorted (ASST); Aqua (AQ); Blue (BL); Crystal (CRY); Gold (GD);
Green (GR); Red (RD); Purple (PR).
Lights can be assorted for best price.
Style
2100
2101
2106
2107
2108
2115
2117
Ornament Stand
ASST AQ
3.963.80
4.014.27
XX
6.253.58
3.75 3.18
2.842.60
X 2.85
BL
3.51
3.75
X
3.58
3.45
2.60
X
CRY
4.55
4.09
X
X
x
2.60
2.95
GD
4.27
3.75
3.35
3.58
3.18
2.60
3.15
GR RD
4.564.10
4.024.27
X
5.00
5.045.12
3.45
x
2.602.60
3.15
X
PR
X
X
X
3.58
3.98
2.60
2.60
STARS
The perfect top for any ceramic Christmas tree. Specify color. Can be assorted for best price.
Style
Name
BL CRY GD
GR
RD
2200 Lg Celestial Star
X
.63
X
.30
.55
2201 Med Celestial Star
.34
.34
.55
X
.41
2202
Sm Astral Star
.20
X
X
.20
X
Hooks made of high-quality
spring wire, especially for hanging ceramic ornaments (bore a
¼” hole in the greenware; this
will allow the hook to fit properly after the
ornament has been fired.)
ORNHK Each
.20
Pkg. of 10
1.20
Pkg. of 100
7.00
Ornament Caps
These all-metal caps have a
satin brass finish and spring
wire hangers. Suitable for
balls, bells, etc.
Dia. Cap For Rd ball
ORNCP12 ½”
2¼”
25/8"
ORNCP58 5/8"
ORNCP78 7/8"
3¼”
ORNCP34 ¾”
3¼”
ORNCP11” filagree syle
Each
$.43
.62
.55
.50
.50
115
Lamp Parts
Cord Sets
Style
Description
1901-WH 8” Line Cord
Cord set w/molded plug. White.
Each Price
$2.99
1901-BR
8” Line Cord
Cord set w/molded plug. Brown.
$2.20
Ea. For 10
$2.09
Ea. For 100
$1.79
1901
1902
1902
8’ Line Cord with Switch
$4.54
Cord set w/molded plug and line cord switch attached. White only.
1903
1903
Clip in Candelabra Socket
$5.05
6’ cord set w/switch, molded plug, & clip-in socket attached. Fits 1” hole. White.
1905
Large Tree Wiring with Switch
3.50
2.45
1.75
Wiring for 2-piece trees larger than 12”. Includes nipple, palnut, bakelite standard socket, 8’ cord with switch,
molded plug and a 5”, 40-watt tubular clear bulb.
1905
1906
1906
Flush Mount Candelabra Cord Set
$5.54
6’ line cord w/switch attached. Socket has threaded neck. Includes knurled locknut.
1907
1907
Small Tree Wiring with Switch
3.00
2.10
1.50
Wiring for 2-piece trees smaller than 12”. Includes bakelite candelabra socket, nipple, palnut, 8’ line cord with
switch and molded plug and 7-1/2-watt bulb.
1908
1908
Lamp Post Candelabra Cord Set
$5.88
6’ line cord w/loose end plug. Socket is press-fit for approx ¾” hole. Easy assembly.
1904
Line Cord Switch
$1.18
On/off switch attaches anywhere along line cord. Ivory.
1910
Press-in candelabra socket
with cord 1” hole, 6’ wire
1904
5.12
1915
Safe-T-Plug
$ 2.01
UL approved. Instant hand assembly. Cut end of wire. Slide cap to remove. Bend end of wire
down, then place flat side in groove. Slide cap back into place. White.
1915
Bulbs - Standard Base
Style
1800
1801
Description
Tubular 5" 40W (Imported)
Tubular 11-7/8" 40W (Imported)
Bulbs - Candelabra Base
Style
1802
1803
1804-AMB
1804-CL
1804-GR
1804-RD
1812-BL
1812-OR
1812-RD
1805
1806
1807
1808
116
Description
Clear Bulb 7W (Imported)
Candelabra Bulb 25W
Flasher Bulb, Amber
Flasher Bulb, Clear
Flasher Bulb, Green
Flasher Bulb, Red
Steady Burning Opaque Bulb, Blue
Steady Burning Opaque Bulb, Orange
Steady Burning Opaque Bulb, Red
Flicker Flame Bulbs 2-3/4" 3W
Tubular 4½" long 25W
Mini Tubular, 1-½" long 6W
Tubular 2-7/8” long 25W
Each
$ 2.75
7.90
1801
1800
Each
Ea. For 25
Ea. For 100
$ .43
.70
0.49
0.35
.740.52
.760.53
.82
.79
.70
.73
.70
2.71
1.91
1807
3.04
2.37
1.43
1.06
.95
0.67
1802
Clock Movements, Books & Bisque Ware
Battery Clock Movements
Kienzle Quartz Faceless Battery Movement
Movement measures 2½” H x 2½” W x 9/16" D. Accurate movement uses one AA battery (not included).
Easily mounted by means of a standard center shaft
(specify). Set hands from the front or rear. Complete with hands (specify below), hardware and sweep second
hand.
Each
CLB
5/16” long center shaft
9.95
CLB-L
9/16” long center shaft
9.00
CLBHANG Metal hanger
.28
Quartz Dial Movements 3½” Diameter
Highly accurate quartz movements with
sweep second hand, distinctive gold dial,
and gold finish rim. Numerals and hands are
black. Uses one AA battery (not included).
Clock fits openings 3" – 3-1/2". Non-alarm, easy pressure fit.
CLBD7
Roman
$ 9.99
CLBD8
Arabic
9.40
Quartz Dial Movement 211/16" Diameter
Highly accurate quartz movements with beautiful gold dial, black Roman numbers and sweep second hand. Takes one AA size battery (not
included). Built-in spring clips allow lock to be press-fit into 2 3/8” hole.
CLBD1
$12.00
Mini Clock Movements
Precision Quartz Inserts that fit small clock
molds.
1 7/16" diameter. Movements are
easy, pressure-fit front mount. All
three have gold rims. Will fit into a
1 3/8” hole. Battery included.
Clock Hands (for battery powered clocks)
Available in black or gold:
For 5' to 6" Dial
Each
CLBHP-B
Sm plain hands
2.10
CLBHP-G 1.47
For 5” to 6” Dial
CLBHS-B
Sm spade shape
(Black Only)
For 5" to 6" Dial
CLBHF-B
Sm fancy hands CLBHF-G
1.30
.90
.90
For 5” to 6” Dial
CLBHW-B Sm wiggle shape
.99
(Black Only)
For 7" to 8" Dial
CLBHFL-B Lg fancy hands2.10
CLBHFL-G 1.29
For 7” to 8” Dial
CLBHSL-B Lg spade shape
CLBHSL-G 1.35
.99
Books
For a list of currently available books, please visit our
online store.
CLBD3
CLBD5
White face/Arabic numerals/second hand in Black
Gold face/RomanNumerals/second hand
CLBD3
CLBD5
Each
11.99
11.05
Ea./10
7.10
7.74
Ea./25
6.45
6.63
Ea./50
6.30
Replacement Battery
CLBBAT
1.35
Bisque Ware
Ceramic Supply offers a wide range of bisque ware. For a complete list of available products, call us today at 800723-7264 or visit www.eceramicsupply.com/BisqueCatalog2013.pdf
117
Index
A
Bamboo/Hake
105
Accessories, Ware
113-117
Chinese Multihead
105
Acrylic Colors (Non-Firing)
Cleaner
32
Duncan
31-32
Royal Brushes
105-107
Mayco
32
Duncan Brushes
106
Adhesives112
Sets
107
Airbrushes/Compressors80
Buckets, Clay & Glaze
78, 82, 113
Air Drying Clay
4, 108
Bubble Wrap
112
Alumina Hydrate
36, 39
Bulbs, Lamp
116
Alumina Oxide
36, 39
Burlap103
Amaco (also see Brent)
Burners, Gas
55
Banding Wheels
81
Glazes
7-10
C
Kilns
48
Cabinets
Pencils/Crayons
24
Clay
83
Spray Booth
80
Damp Proof
83
Underglazes
23-24
Drying
83
Wheels
64-65 Calipers101
A.P.G. Missouri Fire Clay
36, 39
Candle Cups
113
Aprons85
Cane Handles
114
APTII Mender
5
Canvas
72-73, 90
Armatures103
Carts
Art Cart
82
Art Cart
82
Aztec Mender
5
Batmobile
82
Clay
82
B
Heatproof
82
Bags, Plastic Shopping/Storage
112
Carving Bow
93
Ball Clays
39, 41
Carving Sets
103
Ball Mills
67
Carving Wax
108
Bama Stilts
60
Castable Refractory
56
Bamboo Brushes
105
Casting Materials
Bamboo Handles
114
Firing
5
Banding Straps, Mold
77
Non-Firing
109
Banding Wheels
81
Ceco Powder (Latex Thickening Agent)
109
Barium Carbonate
36, 39
Cement, Portland
109
Batmobile68
Chemicals & Raw Materials
Bats, Wheel
68, 69
Glossary
35-38
Battery Clocks
117
Mixing Accessories
75-78
Bead Setters
62
Price List
39-41
Beeswax108
China Clays
36, 39
Bell Stilts
60
Chisels103
Bentonite
36, 39
Christmas Tree
Bevel Cutter
88, 94
Lamp Kits/Lights
115-116
Bisque117
Chromium Oxide
36, 39
Blanket/Block/Board, Insulating
56
Clay Accessories
86-91
Body Stains
33-35
Clay Magic Mold Catalog
77
Bone Ash
36, 39
Clay Mixer
74
Books 117
Clays
Booties, Brent
65
Moist Firing
2-4
Borax
36, 39
Dry
5
Boric Acid
39
Self-Hardening
4, 108
Bowl Stands
114
Clay Containers
82
Boxes, Wood
115
Clay Boss, Creative Industries
67
Brent
Clay Cutters
93, 100
Batmobile
68
Clay Guns
89
Extruder
71
Clay Lift Tools
96
Kiln Shelf Cart
82
Clay Thickness Strips
90
Slab Roller
72
Clay Tool 88
Ware Cart
68
Clay Traps
78
Brent
Clean-Up Wheels
64-65
Tools
96, 99, 102
Wheel Seat
65
Sponges
104
Bricks, Kiln
45, 54, 56
Clock Movements, hands
117
Brushes
CMC, Dry Gum
37, 40
Accessories
105 Cobalt Carbonate
36, 39
118
Index
Cobalt Oxide
36, 39
Overglazes
29
Cobalt Sulfate
36, 39
Tools
96, 102
Compressors80
Underglazes
25-27
Concepts, Duncan
26-27
Dust Masks
84
Cones, Accessories
57
Connectors, Wire
54
E
Containers, Storage
78, 82
Easy Fire Kilns
46
Cookie Cutters
90-91
Element Pins
54
Copper Carbonate
36, 39
Elephant Ear Sponges
104
Copper Oxide - Black
36, 39
Enameling Kilns
50-51
Copper Oxide - Red
36, 39
Engobes24
Copper Sulfate
36, 39
Envirolink52
Copperas Sulfate (Iron Sulfate) 36, 39
Envirovent52
Cords, Lamp
116
EPK
36, 39
Corks114
Essence, Luster and Gold
29
Cornwall Stone
37, 39
Euclid Stainless Steel Tools
87, 91
Crackle Glazes
8,12, 14, 20, 22
Extruders
Crayons, Underglaze
24
Hand Held
89
Creative Industries Pottery Wheels
67
Wall Mount
70
Creative Paradise Fusible Glass & Slump Molds
110-111
Die Sets
70-71
Crocus Martis - Red
39
Crocus Martis - Yellow
39
F
Cryolite39
F4 Kona Feldspar
37, 39
Custer Feldspar
367, 39
Feldspar
37, 39
Cut-Off Needles
96, 101
Fettling Knives
97
Cutters, Stainless Tile
87
Files, Greenware
104
Firebrick
45, 54, 56
D
Flint (Silica)
37, 39
Damp Proof Cabinet
83
Flower Making Tools
97
Darvan
5, 39
Fluorspar
37, 39
Dawson Kiln Sitter/Timer
54
Foam Trim Bat
68
Fountain Pumps
113
Debcor82-83
FRG Plaster
42
Deco Slip, Engobe
24
Frits
37, 39
Decorating Wheels
81
Front Load Kilns
48
Decals (Make Your Own)
30
Furniture
Decorating Accessories
88
Kiln 58-59
Decorating Disks, MKM
90
Studio
82-83
Deflocculant
5
Detail Bottles
88
G
Dipper, Honey
113
G200 Feldspar
37, 39
Dipping Glazes
Gerstley Borate
37, 40
Amaco
9
Giffin Grip
68
Mayco
16
Gillespie Borate
37, 40
Duncan
11
110-111
Spectrum
22 Glass, Fusible
50-51
Standard
22Glass Kilns
Glass Tools
110, 112
Dipping Tongs
102
Glaze Making Equipment & Materials
Dirty Girl Tools
94
Ball Mills
67
Doll Maker’s Tools
102
Chemicals & Raw Materials
39-41
Dolly
78, 82
Dipping Tanks
78, 82
Dolomite
37, 39
Mason Stains
33-35
Dragon Eye Tool
86
Mixing Equipment
78
Dragon Scale Tool
86
Scales
79
Drape Molds
89
Sieves - Scoops
78
Drill Tools
96-97, 103
Glazes, Firing
Dry Clays
5
Amaco
7-10
Dry Glazes
22
Duncan
11-13
Drying Cabinets
83
Mayco
14-18
Drying Table
88
Spectrum
18-22
Ducting, flexible
52
Standard
22
Duncan
78
Brushes
106Gleco Clay Traps
Glitter, Brush-On
31
Glazes
11-13
Gloves
Mold Catalogs
77
Heat Protection
85
Non-Firing Products
31-32
119
Index
Gloves
Front Load
48
Latex
85
Furniture
58-62
Leather
85
Glass Kilns
50-51
Polyethylene
85
Household Current
44, 49
Rubber
85
Insulating Materials
56
Glues112
L&L Kilns
46-47
Goggles85
Production Kilns
44-46, 49
Goldart Cedar Heights Fire
39
Pyrometers/Thermocouples
45, 55
Gold, Metallic - Firing
29
Replacement Parts
54-55
Gold Off Cream
30
Shelves/Posts
58-59
Greenware Tools
104
Skutt Kilns
44-45
Grinding Disk
68
Stackers Tile/Plate/Bead
62
Grog
37, 40
Stands
55
Grolleg - English Plastic
36, 39 Stilts
60-62
Gums
29, 37, 40
Venting
52-53
Kiln Shelf Cart
82
H
Kiln Wash
37, 40, 59
Hake Brushes
105
Knives
95, 97, 99
Hammers, Clay
86, 90
Kyanite
37, 40
Handle Makers
100
Handles, Bamboo, Cane, Wire
114
L
Hangers, Plate
114
L&L Kilns
46-47
Hawthorne - Missouri Fire Clay
36, 39 Lamp Parts
116
Health and Safety
84-85
Latex Gloves
85
Heat Protection
84-85
Latex, Liquid
40, 109
High Alumina Kiln Shelves
58
Leather Gloves
85
High-Temperature Wire/Rods
62, 97
Leg Extentions, Brent
65
Hole Cutters
100
Lehman Equipment
75-76
Honey Dippers
113
Liberty Belle Kiln
47
Hood, Heat Protection
85
Lid Master
101
Hood Vent
53
Lid Prop
54
Hump Molds
89
Lids, Kiln Replacement
54
Hydrocal42
Lights, Christmas Tree
115-116
Hydrometers77-78
Lithium Carbonate
37, 40
Hydrostone42
Loop Tools
95, 98
Lusters, Metallic - Firing
29
I
Lester Plaster Bat System
69
Ilmenite - Granular, Powdered
40
Insulating Materials
56
M
Iron Chromite
37, 40
MKM Decorating disk
90
Iron Oxide - Black
37, 40
Macaloid (Veegum T)
37-38, 40
Iron Oxide - Red, Special
37, 40
Magic Mender
5
Iron Oxide - Spanish Red
37, 40
Magic Metallics
32
Iron Oxide - Yellow
37, 40
Magnesium Carbonate
37, 40
Iron Sulfate
37, 40
Magnets114
Majolica Glaze
7, 18
J
Manganese Carbonate
37, 40
Jars, Storage
113
Manganese Dioxide - Powdered
37, 40
Jiffy Mixers
77-78
Manganese Dioxide - Granular
37, 40
Jigger Arm
67
Masks and Respirators
84
Jolly King Plasteline
108
Mason Stains
33-35
K
Mallets and Paddles
86,90
Kastolite56
Mayco Colors
Kemper Tools
95-102
Glazes
14-18
Kentucky OM4
36, 39
Non-Firing Products
32
Kevlar Gloves and Mittens
85
Underglazes
27
Kick Wheels
63, 65
Menders
5, 13, 18, 32
KilnMaster Controller
45
Metallics,
Kilns Fired
8, 13, 21, 29
Amaco Kilns
48
Non-fired, acrylic
31-32
Bricks
45, 54, 56
Microcrystaline Wax
108
Building Materials
56
Microkiln112
Choosing your Kiln
43
Mini Tools
98
Cone Art Kilns
49
Missouri Fire Clays
36, 39
Controllers, Electric
45
Mittens, Heat Protection
85
120
Index
Mix-A-Mold109
Permastone109
Mixers
Petalite
38, 40
Clay
74
Peter Pugger Clay Mixer/Pugmill
74
Slip
75-77
Pin Tools
96, 101
Mixing Bowl
78
Pins, Element
54
Moist Clays
2-4 Plasteline Clay
108
Mold Mender
77
Plaster
42, 109
Molds
Plaster Bat System
69
108
Accessories
77Plaster Craft/Rigid Wrap
Glass Slump
111
Plaster Mixing Instructions
42
Plaster Catalogs
77
Plaster Molds
Catalogs
77
Plaster Slump/Hump
89
Slump/Hump
89
Plaster Texture
86
Texture Molds
86
Mold Making Materials
109
Plaster Tools
103
Mold Release
77, 109
Plastic Bags
112
Molochite
37, 40
36, 40
Mother of Pearl
29 Plastic Vitrox
Plate Stackers
62
Mudcutter93
Plate Stands, Hangers
114
Mudtools93
Porcelain
Multipens112
Clay
3-4
Prop
56, 59
N
Slips
5
Needle Tools/Sets
96, 101, 103
Posts, Kiln
58
Nepheline Syenite
37, 40
Pot Lifters
101
Nichrome Wire
62, 97
100
Nickel Carbonate
37, 40 Pottery Tool Kit
Pottery Wheels
63-67
Nickle Oxide - Black
37, 40
88
Nickle Oxide - Green
37, 40 Precision Decorator
Press Molds
89
Night Light
113
Printmaking Block Material
27
Nomex Flame Protection Hood
85
Production Kilns
44-46, 49
Non-Firing Colors
Protection Tube
55
Duncan
31-32
Mayco
32
Pugmills74
Non-Firing Clays
4, 108
Pumice
38, 40
North Star
Pumps, Fountain
113
Extruders
70
Pump Tops
113
Slab Rollers
72
Pumps, Slip
75-76
Ware Trucks
82
Putty, Ceramic
56
Nylon Fiber
40 Pyrometers55
Pyrometric Cones
57
Pyrophylite40
O
Ochre, Yellow
37, 40
R
Ohaus Scales
79
Raku Ornament Caps/Hooks/Wire/Stands
62, 115
Clay
2
Oven Firing Glaze
30
Gloves/Mittens
85
Overglazes
Glazes
9, 16, 19
Decals
30
Goggles
85
Duncan
29
Hood, Heat resistant
85
Pebeo
30
Tongs
62
Pens
30, 112
Rasps103
Reclaimers, Slip
75
P
Red Art - Cedar Heights
37, 40
Paasche Airbrushes
80
Resists
13, 18, 41, 88
Packing Materials
112
Respirators84
Paddles
86, 90
Ribbon Tools
98
Palette Knives
99, 102
Ribs
92, 101
Palettes,Plastic105
Ribs, Sherrill Mudtools
92
Paper Clay
4
Riffler Sets
103
Paper, Hi Temperature
56, 110
Rigid Wrap/Pariscraft
108
Pearl Acrylic Colors
31-32
Rollers, Texture 87
Pearl Ash
38, 40
Rollers, Tile Cutters
87
Pebeo Oven Firing Glaze
30
Rolling Pins
86, 90, 97
Peep Hole Plugs
54
Roma Plastilina
108
Pencils, Underglaze
24
Pens, Overglaze (Gold)
29
121
Index
Royal
Snow
Brushes
105-107
Firing
13
Tools
99
Non-fired
31-32
Rubber Bands, Mold
77
Soap, Mold
109
Rubbing Stone
104
Soda Ash
38, 41
Rutile
38, 40
Sodium Bicarbonate
38, 41
Sodium Silicate
5, 38, 41
S
Soldner Clay Mixer
74
Sairset56
Spatulas78
Sand, Silica
38, 41
Spectrum Glazes
18-22
Sanding Pads
104
Multipens Liquid Enamel
112
Saw Tools
77
Underglazes
28-29
Scales, Ohaus
79
Speedy Spurs
61
Scioto Mold Catalog
77
Splash Pans
63-67
Scoops78
Spodumene
38, 41
Scrapers
100, 103
Sponges and Sponge Tools
93, 104
Screen, Safety
84
Spout Tool
90
Sculptamold 108
Spray Booths
80
Sculpture
Spray Sealers
32
Armatures
103
Sprayers
Clays, Firing
3
Airbrush
80
Modeling Materials
108
Mouth Sprayer
80
Stands
81
Sprig Molds
89
Tools
98-99, 101, 103
Springs, Nodder
114
Self-Hardeing Modeling Materials
4, 108
Squegee
30, 101
Sgraffito Tools
96
Stainless Steel Tools
87, 91
Shelf Cart
82
Stains, Mason
33-35
Shelves, Kiln
Stains, Non-Firing
see Acrylics
Cordierite
58-59
Stamps
Core Lite
58
Letters & Numbers
89
High Alumina
58
Cast, decorative sets
89
Shimpo
Stamp Pad, Underglaze
27
Ball Mill
67
Stands
Banding Wheels
81
Bowl/Plate
114
Jigger Arm
67
Kiln
55
Pottery Wheels
66
Ornament
115
Pugmills
74
Stilts60-62
Splash Pans
67
Stone Carving Set
103
Stool, Adjustable
66, 69
Stone, Rubbing
104
Work table, wheel
67
Stoneware
Shredder93
Clay
2-4
Sieves78
Slip
5
Silica (Flint)
37, 39
Stoppers,Rubber & Plastic
113
Silver Carbonate
38, 41
Storage Containers
78, 82, 113
Skutt Kilns
44-45
Straps, Mold
77
Blank rings
45
Stroke ‘n Coat
16-17
Controllers
45 Strontium Carbonate
38, 41
Easy View Upgrade
45
Studio Furniture
82-83
Envirolink
52
Superpax
38, 41
Envirovent
52 Sweeping Compound
85
Kiln Link
45
Lid-Lifter Upgrade
45
T
Skutt Pottery Wheels
63
Talc
38, 41
Slab Rollers
72-73
Talisman Sieves
78
Slicer, Clay
100
Tape, Ceramic
61
Slip Dope
5, 77
Tennessee #5 Ball Clay
36, 39, 41
Slips
Tennessee XX Saggar Clay
36, 39, 41
Casting, Liquid
5
Terra Cotta
Casting Equipment & Pumps
75-76
Clay
2
Dry
5 Slip
5
Engobes
24
Texture Tools
Slip Trailing Bottles
88
Brush
86
Slump Molds, Plaster
89
Dragon Scale Tool
86
SlumpMolds, Bisque for Glass
111
Hammers
86
Mats
86
122
Index
Paddles
86, 100
Ware Carts
Plaster Molds
86
Wax, Carving
Ribs, Kemper
101
Wax Resist
Rolling Pins
86
Wedging Boards
Wiggle Wires, Dirty Girls
94
Wheels
Texturizer, Amaco
9-10
Accessories & Bats
Thermocouples
45, 56
Amaco (Brent)
Thermometer113
Banding
Tile Clay #6
41
Brent
Tiles115
Creative Industries
Tile Cutters - Stainless Steel
115
Handicapped
Tile Cuttter - Rollers
1156
Kick Wheels
Tile Stackers
62
Leg Extentions
Tin Oxide
38, 41
Seat
Titanium Dioxide
38, 41
Skutt
Tools
Shimpo
Ceramic Supply
100-102 Stools
Dirty Girls
94
Thomas-Stuart/Skutt Kick Wheels
Duncan
96-102
Wheel Heads
Euclid Stainless Steel
87, 91
Whisper Wheel, Shimpo
Kemper
95-102
Whiting (Calcium Carbonate)
Mudtools
92-93
Wire
Plaster
103
Armature
Royal Tools
99
Ornament
Sculpture Tools
98-99, 101, 103
High Temperature
Trimmer Tools 95-98, 100, 103
Wire Tools
Tongs, Dipping
102
Wollastonite
Tongs, Raku
62
Work Table
ToteBag
105
Wood Carving Tools
Transfer paper
Wood Tools
Clay Carbon
90
Saral 90
Z
Trim Gin
100, 103
Zinc Oxide
Trimming Bat, Foam
68
Zircopax
Turning Tools
91, 100, 103
Turntables81
82
108
13, 18, 41, 88
73, 83
68-69
64-65
81
64-65
67
64
63, 65
65
65
63
66
66, 69
63
68
66
38, 41
103
115
62, 97
91, 98-99
38, 41
83
103
98, 101
38, 41
38, 41
U
Ultimate Edger
88
Ultracal42
Ultrox
38, 41
Underglaze
Amaco
23-24
Applicators
88
Crayons
24
Duncan
25-27
Engobes
24
Gum/Media
29, 40
Mayco
27
Pencils
24
Spectrum
28-29
Stamp Pad
27
V
Veegum T
38, 41
Velvets, Amaco
23-24
Vent-A-Kiln53
Vent-A-Kiln Safety Screen
84
Vents
Envirovent
52
Orton Vents
53
Vent-A-Kiln
53
VentSure
53
Volcanic Ash
38, 41
W
Water Globe
113
123
Notes
124