Replace the Lens NOT the Fixture!
RFK3™ Retrofit any
existing lay-in fixture
into a deep cell
parabolic louver.
RFK2™ Retrofit any
existing lay-in fixture
(including 3” deep
aluminum) with a
standard white steel
door frame. 1/2” Frame
will accept any lens,
louver or eggcrate.
Old Lens
New Parabolic Louver
1. Unlatch and remove existing door frame
2. Disassemble door frame and remove lens/louver
3. Measure existing lens/louver
4. Factory to cut new lens/louver to fit
5. Install new lens/louver into existing
fixture door frame
Before:
Electrical Industry
Offering the most comprehensive selection for
new and retrofit lighting installations
After:
To Order:
1. Provide critical dimensions, or trace the profile
of the diffuser on a piece of paper.
2. Measure the exact length of the diffuser.
3. Fax or Email Information
• LOUVERS
• EGGCRATE
• PRISMATIC LENSES
• WRAPAROUND LENSES
• OUTDOOR GLOBES
• RETROFIT KITS
• TUBE GUARDS
1400 S. Old Hwy 141 Fenton, MO 63026 USA
V10272014
Fax: 636.600.4108
Phone: 800.248.0224 or 636.600.4084
sales@slplighting.com
www.slplighting.com
1400 S. Old Hwy 141 Fenton, MO 63026 USA
www.slplighting.com
Decorative Louvers
Parasquare Louvers
®
Parabolic Louvers are a square
configuration of cells with parabolic (curved)
cell walls. Their function is to direct light
downward in a controlled manner and
eliminate the view of the light source.
Style 4
1
.400”,Style
10,2mm
.625ì
16mm
Decorona™
All SLP Parabolic Louvers are available:
Louver Features
.400”, 10,2mm
(Style 1) for Lay-in-Grid or T-Bar Systems.
(Style 4) for Lighting Doorframe
Fixtures.
.625ì
Materials:
• Styrene
• Acrylic
16mm
.400”
.400”, 10,2mm
10,2mm
P1: Nominal
1/2” x 1/2” x 1/2”
.625”
.625ì
16mm
16mm
1.00”
25,4mm
.75”
19mm
.625ì
1.50”
16mm
38,1mm
.48”
12,2mm
Parahex
Standard Finishes:
• Specular Silver
• Specular Gold
• Aluma-Lux (Semi-Specular)
• Black
• White
Standard Sizes:
• 2x4
• 2x2
• 1x4
• Special Fabrication Available
.400”, 10,2mm
P2: 1-1/2” x 1-1/2” x 1”
•
•
•
•
•
.48”
.48”
12,2mm 12,2mm
Look Of Aluminum At The Price Of Plastic
Doesn’t Show Fingerprints
No Cave Effect
Will Not Bend Or Dent
Available On Any Slp Plastic Louver Or Eggcrate.
P3: 3/4” x 3/4” x 1/2”
.75”
.75”
19mm
19mm
1.50”
38,1mm
The Forgiving Finish
P4: 3” X 3” X 1-1/2”
3”
76,2mm
.35”
9mm
.75”
19mm
1400 S. Old Hwy 141 Fenton, MO 63026 USA
• A Premium Finish For Outstanding Lighting Installations.
• Allows Contaminants Such As Fingerprints Or Dust To Be Wiped Away.
• Available On Any Slp Plastic Louver Or Eggcrate.
P5: 3/4” x 3/4” x 3/8”
Phone: 800.248.0224 or 636.600.4084
Fax: 636.600.4108
sales@slplighting.com
www.slplighting.com
Decorative Louvers
Parasquare Louvers
®
Parabolic Louvers are a square
configuration of cells with parabolic (curved)
cell walls. Their function is to direct light
downward in a controlled manner and
eliminate the view of the light source.
Style 4
1
.400”,Style
10,2mm
.625ì
16mm
Decorona™
All SLP Parabolic Louvers are available:
Louver Features
.400”, 10,2mm
(Style 1) for Lay-in-Grid or T-Bar Systems.
(Style 4) for Lighting Doorframe
Fixtures.
.625ì
Materials:
• Styrene
• Acrylic
16mm
.400”
.400”, 10,2mm
10,2mm
P1: Nominal
1/2” x 1/2” x 1/2”
.625”
.625ì
16mm
16mm
1.00”
25,4mm
.75”
19mm
.625ì
1.50”
16mm
38,1mm
.48”
12,2mm
Parahex
Standard Finishes:
• Specular Silver
• Specular Gold
• Aluma-Lux (Semi-Specular)
• Black
• White
Standard Sizes:
• 2x4
• 2x2
• 1x4
• Special Fabrication Available
.400”, 10,2mm
P2: 1-1/2” x 1-1/2” x 1”
•
•
•
•
•
.48”
.48”
12,2mm 12,2mm
Look Of Aluminum At The Price Of Plastic
Doesn’t Show Fingerprints
No Cave Effect
Will Not Bend Or Dent
Available On Any Slp Plastic Louver Or Eggcrate.
P3: 3/4” x 3/4” x 1/2”
.75”
.75”
19mm
19mm
1.50”
38,1mm
The Forgiving Finish
P4: 3” X 3” X 1-1/2”
3”
76,2mm
.35”
9mm
.75”
19mm
1400 S. Old Hwy 141 Fenton, MO 63026 USA
• A Premium Finish For Outstanding Lighting Installations.
• Allows Contaminants Such As Fingerprints Or Dust To Be Wiped Away.
• Available On Any Slp Plastic Louver Or Eggcrate.
P5: 3/4” x 3/4” x 3/8”
Phone: 800.248.0224 or 636.600.4084
Fax: 636.600.4108
sales@slplighting.com
www.slplighting.com
Lenses
Eggcrate Louvers
A lens is a flat sheet of plastic, usually
clear or white. The distribution of the light
is skewed depending on the
pattern of the lens. Random and
uncontrolled distribution creates a bright
area of light. With certain
patterns, the lamp image is reduced.
Eggcrate is a square configuration of cells with flat cell
walls. The function of eggcrate is to block any view of the
space above while creating a bright area of light.
T Series: 1/2” x 1/2” x 1/2”
.50”
12,7mm
.50”
12,7mm
Styrene - White
Acrylic - White
1x4, 2x2, 2x4
Also Available In: 3x4 & 30x60
Prismatic Pattern 12: The industry standard 3/16” female prismatic lens.
• Thickness: .100”, .110” or .125”
• Acrylic and Styrene (Polycarbonate Special Order)
• Sizes up to 50”x100”
TC Economy Grade: 1/2” x 1/2” x 3/8”
Styrene - White, Black or Specular Silver
Acrylic - White
.300”
7,6mm
.625”
15,9mm
Prismatic Pattern 15: The bold 3/8” female prism of Pattern 15 offers
reduced glare and an upgraded appearance.
• Thickness: .200”
• Sizes up to 4’x4’
Prismatic Pattern 19: The 3/16” male prism of Pattern 19 offers the lowest
glare of the prismatic lenses.
• Thickness: .156”
• Sizes up to 4’x4’
TC500 Specification Grade: 1/2” x 1/2” x 3/8”
Styrene - White or Black
Acrylic - White
.312”
7,9mm
True 1/2” Cell Size
.50”
12,7mm
.50”
12,7mm
Aluminum Eggcrate
.50”
12,7mm
AT: 1/2” cube aluminum
Translucent Acrylic:
• Frosted White or Matte Clear
• Thickness: .040” or .080”
• Sizes up to 2’x4’
AT1: 1” cube aluminum
1”
25,4mm
All Lenses are available in Non-Yellowing Clear Acrylic.
1400 S. Old Hwy 141 Fenton, MO 63026 USA
Finishes: baked white enamel, mill finish, clear anodized or black enamel. Custom sizes available.
Phone: 800.248.0224 or 636.600.4084
Fax: 636.600.4108
sales@slplighting.com
1”
25,4mm
www.slplighting.com
Lenses
Eggcrate Louvers
A lens is a flat sheet of plastic, usually
clear or white. The distribution of the light
is skewed depending on the
pattern of the lens. Random and
uncontrolled distribution creates a bright
area of light. With certain
patterns, the lamp image is reduced.
Eggcrate is a square configuration of cells with flat cell
walls. The function of eggcrate is to block any view of the
space above while creating a bright area of light.
T Series: 1/2” x 1/2” x 1/2”
.50”
12,7mm
.50”
12,7mm
Styrene - White
Acrylic - White
1x4, 2x2, 2x4
Also Available In: 3x4 & 30x60
Prismatic Pattern 12: The industry standard 3/16” female prismatic lens.
• Thickness: .100”, .110” or .125”
• Acrylic and Styrene (Polycarbonate Special Order)
• Sizes up to 50”x100”
TC Economy Grade: 1/2” x 1/2” x 3/8”
Styrene - White, Black or Specular Silver
Acrylic - White
.300”
7,6mm
.625”
15,9mm
Prismatic Pattern 15: The bold 3/8” female prism of Pattern 15 offers
reduced glare and an upgraded appearance.
• Thickness: .200”
• Sizes up to 4’x4’
Prismatic Pattern 19: The 3/16” male prism of Pattern 19 offers the lowest
glare of the prismatic lenses.
• Thickness: .156”
• Sizes up to 4’x4’
TC500 Specification Grade: 1/2” x 1/2” x 3/8”
Styrene - White or Black
Acrylic - White
.312”
7,9mm
True 1/2” Cell Size
.50”
12,7mm
.50”
12,7mm
Aluminum Eggcrate
.50”
12,7mm
AT: 1/2” cube aluminum
Translucent Acrylic:
• Frosted White or Matte Clear
• Thickness: .040” or .080”
• Sizes up to 2’x4’
AT1: 1” cube aluminum
1”
25,4mm
All Lenses are available in Non-Yellowing Clear Acrylic.
1400 S. Old Hwy 141 Fenton, MO 63026 USA
Finishes: baked white enamel, mill finish, clear anodized or black enamel. Custom sizes available.
Phone: 800.248.0224 or 636.600.4084
Fax: 636.600.4108
sales@slplighting.com
1”
25,4mm
www.slplighting.com
Replacement Wraparound Lenses
A wide selection of replacement wraparound lenses are available.
CITADEL 1
TM
Citadel 1™ is the traditional damp and wet location enclosure. Designed for a strip fixture to be
mounted inside the fiberglass housing for use with T5, T8 or T12 lamps.
IM Series Kit:
VF Series Kits:
4’ & 8’ Available
Shallow: 4’
Deep: 8’
7.5”/190,5mm
7.5”/190,5mm
7.5”/190,5mm
2.75”
69,9mm
2.75”
69,9mm
2.75”
69,9mm
2.5”
63,5mm
2”
50,8mm
3”
76,2mm
Kits Include:
• Fiberglass Housing
• Acrylic Lens with
Matte Finish
• Latch Bag
• Endplugs
Outdoor Replacement Globes and Acorns
A wide selection of replacement globes and shapes are available.
Hardware and Accessories
Globes & Acorns:
• Polycarbonate
• Acrylic
• Smoked, Clear, White
or Linear Prism
Mounting
Latch
Accessories
External Mounting Bracket
Plastic Celcon Latches
Rubber Endplugs
Stainless Steel Latches
Dicast Bushings
Outdoor Replacement Lenses
Citadel 1:
• Acrylic
• Polycarbonate
• Matte or Prismatic Finish
• Lengths: 2’, 4’, 8’
Drop Lens:
• Injection Molded
• 12” x 12”
• 20” x 20”
Citadel 2:
• Acrylic
• Polycarbonate
• Lineal Ribbed, Optically Clear
or Frosted
• Lengths: 2’, 4’, 8’
Tube Guards
are a must for any area in which
debris from a broken lamp cannot be tolerated.
•
•
•
•
Polycarbonate Standard
To fit T12, T8 or T5 Lamps
4’ and 8’ Lengths
UV Filtering Acrylic
Endcaps
• Not recommended for T5HO lamps
• Special Order Only on color tube guards
T5HO Tube Guards
VP60 Lens:
• Polycarbonate
• Injection Molded
• White or Clear
• Gasket and Holes Optional
T5 HO Tube Guard features an increased size and venting
endcaps. The increased size allows a greater distance of the guard
from the hottest point of the lamp near the end of the lamp. This
distance reduces the temperature of the guard material measured
at the inside wall of the guard. The T5 HO Tube Guard is suitable
for use with T5 HO lamps in normal operating conditions where the
surface of the lamp does not exceed 200°F.
1400 S. Old Hwy 141 Fenton, MO 63026 USA
Phone: 800.248.0224 or 636.600.4084
Fax: 636.600.4108
sales@slplighting.com
www.slplighting.com
Replacement Wraparound Lenses
A wide selection of replacement wraparound lenses are available.
CITADEL 1
TM
Citadel 1™ is the traditional damp and wet location enclosure. Designed for a strip fixture to be
mounted inside the fiberglass housing for use with T5, T8 or T12 lamps.
IM Series Kit:
VF Series Kits:
4’ & 8’ Available
Shallow: 4’
Deep: 8’
7.5”/190,5mm
7.5”/190,5mm
7.5”/190,5mm
2.75”
69,9mm
2.75”
69,9mm
2.75”
69,9mm
2.5”
63,5mm
2”
50,8mm
3”
76,2mm
Kits Include:
• Fiberglass Housing
• Acrylic Lens with
Matte Finish
• Latch Bag
• Endplugs
Outdoor Replacement Globes and Acorns
A wide selection of replacement globes and shapes are available.
Hardware and Accessories
Globes & Acorns:
• Polycarbonate
• Acrylic
• Smoked, Clear, White
or Linear Prism
Mounting
Latch
Accessories
External Mounting Bracket
Plastic Celcon Latches
Rubber Endplugs
Stainless Steel Latches
Dicast Bushings
Outdoor Replacement Lenses
Citadel 1:
• Acrylic
• Polycarbonate
• Matte or Prismatic Finish
• Lengths: 2’, 4’, 8’
Drop Lens:
• Injection Molded
• 12” x 12”
• 20” x 20”
Citadel 2:
• Acrylic
• Polycarbonate
• Lineal Ribbed, Optically Clear
or Frosted
• Lengths: 2’, 4’, 8’
Tube Guards
are a must for any area in which
debris from a broken lamp cannot be tolerated.
•
•
•
•
Polycarbonate Standard
To fit T12, T8 or T5 Lamps
4’ and 8’ Lengths
UV Filtering Acrylic
Endcaps
• Not recommended for T5HO lamps
• Special Order Only on color tube guards
T5HO Tube Guards
VP60 Lens:
• Polycarbonate
• Injection Molded
• White or Clear
• Gasket and Holes Optional
T5 HO Tube Guard features an increased size and venting
endcaps. The increased size allows a greater distance of the guard
from the hottest point of the lamp near the end of the lamp. This
distance reduces the temperature of the guard material measured
at the inside wall of the guard. The T5 HO Tube Guard is suitable
for use with T5 HO lamps in normal operating conditions where the
surface of the lamp does not exceed 200°F.
1400 S. Old Hwy 141 Fenton, MO 63026 USA
Phone: 800.248.0224 or 636.600.4084
Fax: 636.600.4108
sales@slplighting.com
www.slplighting.com
Replace the Lens NOT the Fixture!
RFK3™ Retrofit any
existing lay-in fixture
into a deep cell
parabolic louver.
RFK2™ Retrofit any
existing lay-in fixture
(including 3” deep
aluminum) with a
standard white steel
door frame. 1/2” Frame
will accept any lens,
louver or eggcrate.
Old Lens
New Parabolic Louver
1. Unlatch and remove existing door frame
2. Disassemble door frame and remove lens/louver
3. Measure existing lens/louver
4. Factory to cut new lens/louver to fit
5. Install new lens/louver into existing
fixture door frame
Before:
Electrical Industry
Offering the most comprehensive selection for
new and retrofit lighting installations
After:
To Order:
1. Provide critical dimensions, or trace the profile
of the diffuser on a piece of paper.
2. Measure the exact length of the diffuser.
3. Fax or Email Information
• LOUVERS
• EGGCRATE
• PRISMATIC LENSES
• WRAPAROUND LENSES
• OUTDOOR GLOBES
• RETROFIT KITS
• TUBE GUARDS
1400 S. Old Hwy 141 Fenton, MO 63026 USA
V10272014
Fax: 636.600.4108
Phone: 800.248.0224 or 636.600.4084
sales@slplighting.com
www.slplighting.com
1400 S. Old Hwy 141 Fenton, MO 63026 USA
www.slplighting.com