TEA-FOR-TWO®
Features
•
•
•
•
•
•
•
•
5’ BATH WHIRLPOOL
K-852-HB
Cast iron with Safeguard® finish
Variable speed pump with 1.5 kW heater, back-lit
user keypad, and remote control
6 FlexjetsTM
UL listed
Less all trim
ADA compliant when installed per Section 607 of the
Act
Custom pump locations
60″ (1524 mm) x 32″ (813 mm) x 18-1/4″ (464 mm)
ALSO K-852-HE
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
•
•
•
•
•
•
ASME A112.19.1/CSA B45.2
ASME A112.19.7
CSA B45.10
CSA C22.2 No 218.2
UL 1795
ADA
ICC/ANSI A117.1
Colors/Finishes
• 0: White
• Other: Refer to Price Book for additional colors/finishes
Accessories
• CP: Polished Chrome
• PB: Vibrant® Polished Brass
• Other: Refer to Price Book for additional colors/finishes
• NA: None applicable
Specified Model
Model
K-852-HB
K-852-HE
Description
5’ bath whirlpool, custom pump, shown
5’ bath whirlpool, custom pump, top view shown
Required Accessories
K-7169-AF
Clearflo pop-up bath drain
K-9696
Jet trim kit
Colors/Finishes
❑0
❑ Other_____
❑0
❑ Other_____
❑ CP
❑ CP
❑ PB
❑ PB
Optional Accessories
K-586
Undermount installation kit (template and installation instructions)
K-1179
Vinyl tiling-in bead (use when wall material contacts any top surface of the bath)
❑ Other_____
❑ Other_____
❑ NA
❑ NA
Product Specification
The cast iron bath whirlpool with Safeguard finish shall be 60″ (1524 mm) in length, 32″ (813 mm) in width, and 18-1/4″ (464
mm) in height. Product shall have 6 Flexjets, a variable speed pump with 1.5 kW heater, back-lit user keypad, and remote
control. Product shall have custom pump locations. Product shall be ADA compliant when installed per Section 607 of the Act.
Product shall be UL listed and less all trim. Bath whirlpool shall be Kohler Model K-852-_____-_____.
Page 1 of 2
1019700-4-H
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
TEA-FOR-TWO®
Technical Information
Required Electrical Service
Fixture*:
Bathing well:
Basin area, bottom 40-1/2″ (1029 mm) x 20″ (508 mm)
Basin area, top
52-3/4″ (1340 mm) x 24″ (610 mm)
Weight
290 lbs (131.5 kg)
To overflow:
Water depth
13-5/8″ (346 mm)
Capacity
60 gal (227.1 L)
* Approximate measurements for comparison only.
Pump
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Pump/control
208-240 V, 20 A, 50/60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
60 lbs/square foot (290 kg/square meter) loading.
kW
V
A*
1.5
240
11
* Approximate measurements for comparison only.
Cast iron whirlpools are extremely heavy, making some
drop-in installations difficult. Splitting the deck/surround is
recommended if installing into a deck.
Drop-in cutout
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
58-1/2″ (1486 mm) x 30-1/2″ (775 mm)
Cut-out for undermount
K-586 template
10" (254 mm)
K-852-HB
Pump/Control Access Max
34" (864 mm) W x
6" (152 mm) Max
15" (381 mm) H
K-852-HE
Pump/Control Access
34" (864 mm) W x
15" (381 mm) H
No change in measurements if
connected with drain illustrated.
(K-7169-AF or K-7169M-AF)
16"
(406 mm)
1-5/8"
(41 mm) 14" (356 mm)
3/4"
(19 mm)
60" (1524 mm)
2-1/2" (64 mm)
32" (813 mm)
18-1/4"
(464 mm)
2-7/8"
(73 mm)
1/4" (6 mm)
3" (76 mm)
Product Diagram
TEA-FOR-TWO® 5’ BATH WHIRLPOOL
Page 2 of 2
1019700-4-H
1-1/2" OD