Altera Enpirion® Tape and Reel Specification
Altera Enpirion Tape and Reel Specification
Tape and Reel Dimensions / Pin 1 Quadrant Locations
Table 1: Tape and Reel Dimensions and Pin 1 Quadrant Locations
X
1.75
2.25
3.00
3.00
3.00
3.00
3.90
3.90
4.00
4.00
4.00
4.40
5.00
5.50
5.50
5.50
6.00
6.00
7.00
8.00
10.00
10.00
11.00
11.00
11.00
12.00
12.00
Body Size (mm)
Y
2.00
2.50
3.00
3.00
3.00
4.00
4.90
8.65
4.00
4.00
5.00
5.00
4.00
5.50
7.50
7.50
4.00
6.00
4.00
8.00
5.50
7.50
8.00
8.00
10.00
10.00
13.00
Z
0.90
1.15
0.55
1.00
1.15
0.90
1.75
1.75
0.75
0.90
1.10
1.20
1.85
0.90
0.85
0.95
1.10
0.90
1.85
3.00
3.00
1.85
1.85
3.00
3.00
1.85
3.00
Qty/reel
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
1000
1000
1000
500
1000
500
250
250
500
500
250
250
250
250
Reel Dimensions (mm)
Dia (A)
Width (W) Hub Dia (N)
180
12.0
60
180
12.0
60
180
12.0
60
180
12.0
60
180
12.0
60
180
12.0
60
180
12.0
60
180
12.0
60
180
12.0
60
180
12.0
60
180
12.0
60
180
12.0
60
180
12.0
60
180
12.0
60
180
16.0
60
180
16.0
60
180
12.0
60
180
16.0
60
180
16.0
60
180
16.0
60
180
24.0
60
180
24.0
60
180
24.0
60
180
24.0
60
180
24.0
60
180
24.0
60
180
24.0
60
Package Pin 1
Quadrant
2
2
2
1
2
1
1
1
1
1
1
1
2
2
1
1
2
1
2
2
2
2
2
2
2
2
1
All dimensions are typical
Pin 1 Quadrant Locations
User direction of feed
January 2016
1
www.altera.com/enpirion
Reference: 07P-02096 Rev. 55
Altera Enpirion® Tape and Reel Specification
Tape Dimensions
User direction of feed
Package Dimension
Table 2: Carrier Tape Dimensions
Body Size (mm)
X
Y
Z
1.75
2.00
0.90
2.25
2.50
1.15
3.00
3.00
0.55
3.00
3.00
1.00
3.00
3.00
1.15
3.00
4.00
0.90
3.90
4.90
1.75
3.90
8.65
1.75
4.00
4.00
0.75
4.00
4.00
0.90
4.00
5.00
1.10
4.40
5.00
1.20
5.00
4.00
1.85
5.50
5.50
0.90
5.50
7.50
0.85
5.50
7.50
0.95
6.00
4.00
1.10
6.00
6.00
0.90
7.00
4.00
1.85
8.00
8.00
3.00
10.00
5.50
3.00
10.00
7.50
1.85
11.00
8.00
1.85
11.00
8.00
3.00
11.00 10.00 3.00
12.00 10.00 1.85
12.00 13.00 3.00
Ao
2.20
2.55
3.30
3.30
3.30
3.30
6.40
6.50
4.30
4.35
4.30
6.95
4.30
5.80
5.80
5.80
4.30
6.30
4.25
8.30
5.80
7.90
8.25
8.30
10.30
10.40
12.30
Bo
2.00
2.80
3.30
3.30
3.30
4.30
5.20
9.50
4.30
4.35
5.30
5.60
5.30
5.80
7.80
7.80
6.30
6.30
7.25
8.30
10.30
10.40
11.25
11.30
11.30
12.40
13.30
Ko
1.14
1.40
0.80
1.10
1.30
1.10
2.10
2.30
0.95
1.10
1.30
1.60
2.10
1.14
1.20
1.20
1.30
1.10
2.10
3.40
3.25
2.20
2.10
3.25
3.25
2.20
3.25
Tape Dimensions (mm)
F
Po
P1
5.50
4.00
4.00
5.50
4.00
4.00
5.50
4.00
8.00
5.50
4.00
8.00
5.50
4.00
8.00
5.50
4.00
8.00
5.50
4.00
8.00
5.50
4.00
8.00
5.50
4.00
4.00
5.50
4.00
8.00
5.50
4.00
8.00
5.50
4.00
8.00
5.50
4.00
8.00
5.50
4.00
8.00
7.50
4.00
8.00
7.50
4.00
8.00
5.50
4.00
8.00
7.50
4.00
12.00
7.50
4.00
8.00
7.50
4.00
12.00
11.50
4.00
12.00
11.50
4.00
12.00
11.50
4.00
12.00
11.50
4.00
12.00
11.50
4.00
16.00
11.50
4.00
16.00
11.50
4.00
16.00
Do
1.55
1.55
1.55
1.50
1.55
1.50
1.50
1.50
1.55
1.50
1.55
1.50
1.55
1.15
1.55
1.55
1.55
1.50
1.55
1.50
1.55
1.55
1.55
1.55
1.55
1.55
1.55
W
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
12.00
16.00
16.00
12.00
16.00
16.00
16.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
T
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.35
0.30
0.30
0.30
0.30
0.30
0.30
0.30
1. Material is polystyrene meeting surface resistivity of 10⁵ to 10ᶦᶦ ohms/sq inch
2. All dimensions are typical and in millimeters.
3. All specifications comply with EIA-481.
4. Per EIA-481 requirements, the device pocket cavity shall surround the components with sufficient clearance that the component
does not protrude beyond the surface of the carrier tape, the component can be removed from the cavity in a verticle direction
without mechanical restriction, after the top cover tape has been removed, rotation of the component is limited to 20°
maximum, lateral movement of the component is restricted to 0.5mm maximum for 8mm and 12mm wide tape and to 1mm
maximum for 16mm to 24mm wide tape. The Ao, Bo and Ko dimensions that define the cavity in the Table above are for reference
only and may vary within the EIA-481 allowable limits.
5. Body Size X & Y oriented to fit into pocket cavity size.
January 2016
2
www.altera.com/enpirion
Reference: 07P-02096 Rev. 55
Altera Enpirion® Tape and Reel Specification
Reel Dimensions
Contact Information
Altera
101 Innovation Drive
San Jose, CA 95134
Phone: 408-544-7000
www.altera.com
© 2016 Altera — Confidential. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, HARDCOPY, MAX,
MEGACORE, NIOS, QUARTUS and STRATIX words and logos are trademarks of Altera and registered in the U.S. Patent
and Trademark Office and in other countries. All other words and logos identified as trademarks or service marks are the
property of their respective holders as described at www.altera.com/common/legal.html. Altera warrants performance of its
semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to
make changes to any products and services at any time without notice. Altera assumes no responsibility or liability arising
out of the application or use of any information, product, or service described herein except as expressly agreed to in
writing by Altera. Altera customers are advised to obtain the latest version of device specifications before relying on any
published information and before placing orders for products or services.
January 2016
3
www.altera.com/enpirion
Reference: 07P-02096 Rev. 55