Season
2007-2008
Est. 1965
Golf Products Catalog
Superior Service
Industry Knowledge
Product Sales
ARKANSAS - LOUISIANA - MISSISSIPPI - TENNESSEE
West Region Sales
South Region Sales
East Region Sales
L.B. Vaught
Clay Witcher
Brian Burns
501-786-0958
662-891-7399
501-786-0982
lbvaught@keelingcompany.com
claywitcher@comcast.net
brian@keelingcompany.com
K
K E E L I N G C O M PA N Y
Mission Statement
9 POINT CUSTOMER STANDARD
(1) WE STRIVE TO SERVE ALL OF OUR CUSTOMER’S NEEDS AND EXCEED
THEIR EXPECTATIONS EVERY TIME.
(2) WE STRIVE TO CONSIDER THE NEEDS OF OUR CUSTOMERS AND ACT
AS IF THE SUCCESS OF OUR BUSINESS DEPENDS ON THE SUCCESS OF
THE CONTRACTOR IN EVERY SITUATION.
(3) WE STRIVE TO BE KNOWLEDGEABLE ABOUT EVERYTHING WE SELL
IN ORDER TO ASSIST OUR CUSTOMERS WHEN THEY REQUIRE
TECHNICAL ASSISTANCE.
(4) WE STRIVE TO KEEP PROPER INVENTORY ON HAND THAT THE
CUSTOMER NEEDS AND REACT INSTANTLY TO INVENTORY LEVEL
ISSUES AS THEY ARISE.
(5) WE OFFER CUSTOMER TRAINING SEVERAL TIMES A YEAR. OUR
EMPLOYEES STAY INFORMED OF PRODUCT CHANGES AND RELATE
THESE TO THE CONTRACTOR AS THEY OCCUR.
(6) WE STRIVE TO FOLLOW CUSTOMER SUGGESTIONS AND TO REACT
APPROPRIATELY AND QUICKLY WHEN WE RECEIVE SUGGESTIONS. WE
APPRECIATE THE CUSTOMER WHO TELLS US WHAT IS NEEDED, AS IT
HELPS US DO A BETTER JOB.
(7) WE STRIVE TO HAVE CUSTOMER RELATIONSHIPS THAT ALLOW FOR
OPEN DISCUSSIONS ABOUT ALL AREAS WHERE WE CAN IMPROVE.
(8) WE INTEND TO SHOW THE CUSTOMER THAT WE VALUE THEIR
BUSINESS ABOVE ALL ELSE AND THE CUSTOMER’S SUCCESS IS THE
ONLY SUCCESS BY WHICH WE CAN MEASURE OUR OWN.
(9) WE STRIVE TO TREAT EVERY CUSTOMER AS THE MOST IMPORTANT
CUSTOMER THAT WE HAVE.
K
K E E L I N G C O M PA N Y
Ta b l e
o f
C o n t e n t s
GOLF SPRINKLERS AND ACCESSORIES
5-22
GOLF SATELLITE CONTROLLERS
23-27
GOLF CENTRAL CONTROL PRODUCTS
28-40
GOLF PVC AND DUCTILE FITTINGS
41-61
GOLF DRAINAGE PRODUCTS
62-68
GOLF IRRIGATION TOOLS
69-86
GOLF IRRIGATION WIRE AND SPLICE KITS
87-99
ACCESS BOXES
100-102
GOLF AERATORS AND FOUNTAINS
103-114
GOLF PUMP STATIONS AND FILTRATION
115-122
GOLF SERVICE SOLUTIONS
123-129
GOLF TECHNICAL SHEETS
130-147
KEELING COMPANY HISTORY
K E E L I N G C O M PA N Y
G o l f
Page 3
P r o d u c t s
C a t a l o g
K
K
G o l f
P r o d u c t s
C a t a l o g
Standard Features:
Top-Adjustable Part
Circle Arc Setting
Page 4
Top-Adjustable Pressure
Regulator
Top Snap Ring
EAGLE ROTOR FAMILY
K E E L I N G C O M PA N Y
SPRINKLERS
K E E L I N G C O M PA N Y
K
G o l f
P r o d u c t s
C a t a l o g
NEW Eagle 351B
Exceptional Block Rotor for Small Greens and Tee Box Complexes.
Revolutionary Nozzle Design, Creating the best coverage rotor on the market.
Range 18’ to 55’. FULL and PART CIRCLE ROTOR ALL IN ONE.
Price: Call For Pricing
Order #: 351B ##
Type: Specify Distance and
Thread Type
Eagle 500-(550pc)
Superior performance available 33’ radius to 49’. Available in Electric, Hydraulic,
Block with Seal-a-matic (check valve).
Price: Call For Pricing
Order #: AT500x-xx/AT550x-xx
Type: Standard Acme Thread
Block Rotors 10/case qty.
Electric 8/case qty
Eagle 700-(750pc)
Bullet Proof, Industry Leading Rotor. Range 55’ to 80’. Available as a block,
electric or hydraulic rotor. Widest selling application for ins / outs on many of our
top golf courses. Also available with the NEW WIND TOLERENT NOZZLE KITS
Price: Call For Pricing
Order #: AT700x-xx/AT750x-xx
Type: Acme Thread 11/4” Inlet
Electric Rotors 8/case qty.
Eagle 900-(950pc)
High performance Rotor for Single Row Fairways, Large Greens and Rough Areas.
Range 63’ to 91’.
Price: Call For Pricing
Order #: AT900x-xx/AT950x-xx
Type: Acme Thread 11/2” Inlet
Electric Rotors 4/case qty.
Page 5
G o l f
P r o d u c t s
C a t a l o g
K
Eagle 1100-(1150pc)
Go farther than ever with ranges from 85’ to 115’. No other rotor
can cover more ground. Full and part circle models just right for
those trouble areas.
Price: Call For Pricing
Order #: AT1100E-xx/AT1150E-xx
Type: 11/2 acme inlet
Eagle 700-750 Internals
700 (Full Circle) and 750 (Part Circle) Internals are perfect when you
need extra distance out of a 500 series Eagle. Simply remove top snap
ring and place gear drive internal in to existing case using same snap
ring.
Price: Call For Pricing
Order #: 7XXE-XX
Type: Must Denote Full or PC and
Nozzle Size
Eagle 1100-1150 Internals
1100 (Full Circle) and 1150 (Part Circle) Internals are perfect when you need
extra distance out of a 900 series Eagle. Simply remove top snap ring and
place gear drive internal in to existing case.
NOTE: You must purchase an 1100 snap ring, it’s a different size than the 900.
Price: Call For Pricing
Order #: 11XXE-XX
Type: Must Denote Full or PC and
Nozzle Size
Page 6
SPRINKLERS
K E E L I N G C O M PA N Y
WIRELESS SPRINKLERS
K E E L I N G C O M PA N Y
K
G o l f
P r o d u c t s
C a t a l o g
NEW
Unique Features of the EAGLE Wireless Rotor
• Uses wireless paging service to communicate from the central control system directly to the rotor.
• Internal battery and solar panel eliminate the need for external power.
• Handheld transmitter allows direct communication to the
rotor and easy programming.
• Optional default program guarantees irrigation even if there
are computer or electrical problems.
Models:
Full-Circle: EAGLE 700W: Wireless Part-Circle:
EAGLE 750W: Wireless
Arc:
EAGLE 700W: Full-circle, 360° EAGLE 750W: Adjustable, 30° to 345°
This revolutionary addition to the Rain Bird® EAGLE™ line of golf rotors brings innovation and flexibility to your course’s irrigation system. The EAGLE Wireless Rotor operates
without the use of a satellite or decoder, allowing maximum flexibility of placement. With
its innovative wireless technology it requires no electrical “hookup”.
The EAGLE Wireless Rotor can be added on any of the current Rain Bird Central Control
Systems and incorporates the proven components of the EAGLE 700W/750W.
Price: Call For Pricing
Order #: AT7XXW-XX
Type: Specify Nozzle, Part or
Full Circle
Page 7
G o l f
P r o d u c t s
C a t a l o g
K
Page 8
EAGLE ROTOR SPECS
K E E L I N G C O M PA N Y
EAGLE NOZZLE CHARTS
K E E L I N G C O M PA N Y
K
Page 9
G o l f
P r o d u c t s
C a t a l o g
K E E L I N G C O M PA N Y
P r o d u c t s
C a t a l o g
K
Page 10
EAGLE NOZZLE CHARTS
G o l f
EAGLE SERVICE TOOLS
K E E L I N G C O M PA N Y
G o l f
K
P r o d u c t s
C a t a l o g
VT-700
Valve Insertion Tool 500/550/700/750
EGL-SVK
Eagle Selector Service Tool/Key
Order #: VT-700
VT-DR
Order #: EGL-SVK
Valve Insertion Tool 900/950
IS-TSRS
Order #: VT-DR
3/8 Drive Socket Tool to
Remove Rock Screen
SRP
Snap Ring Pliers 900/950/DR/1100
Order #: IS-TSRS
Order #: SRP
SR-700
Snap Ring Pliers 500/550/700/750
Order #: SR-700
Products:
Head (lifetime warranty)
Ref # H1000
Blades:
Ref # H1001
The Head Edger has replaceable blades that are designed
to give maximum performance and to be cost efficient.
Boot and Bearing System:
Ref # H1002
The Head Edger can adjust to fit sprinkler heads from 4 1/2 inches
to 10 inches. With adjustments in 1/4 inch increments, the Head
Edger keeps a tight cut around the sprinkler head.
Page 11
G o l f
P r o d u c t s
C a t a l o g
Rain Bird Quick Coupler Valves
K
MODELS
3RC: .75" (20/27) Rubber cover, one-piece body
33DRC: .75" (20/27) Double track key lug, rubber cover, two-piece body
33DLRC: .75" (20/27) Double track key lug, locking rubber cover, two-piece body
33DNP: .75" (20/27) Non-potable, purple locking
rubber cover, two-piece body
44RC: 1" (26/34) Rubber cover, two-piece body
44LRC: 1" (26/34) Locking rubber cover, twopiece body 44NP: 1" (26/34) Non-potable, purple
locking rubber cover, two-piece body
5RC: 1" (26/34)* Rubber cover, one-piece body
5LRC: 1" (26/34)* Locking rubber cover, onepiece body
5NP: 1" (26/34) Non-potable, purple locking rubber cover, one-piece body
7: 1.50" (40/49)* Metal cover, one-piece body
Price: Call For Pricing
Order #: (Size)(Cover)
Type: Specify Thread Size and
Key Size when ordering
Page 12
QUICK COUPLER VALVES
K E E L I N G C O M PA N Y
GOLF IRRIGATION VALVES
K
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
Rain Bird 100-200EFB-CP Remote Valves
Available in 1”, 11/2” and 2” models. Durable brass body construction 200psi valve.
5 to 200gpm flow rates available.
Price: Call For Pricing
Order #: XXX-EFB-CP-XXX-X
Type: Specify Thread Size
Rain Bird 100-200PES-B Remote Valves
Electric remote control plastic scrubber valve with optional pressure regulating feature.
Price: Call For Pricing
Order #: XXX-PES-B-XXX-X
Type: Available in 1”, 11/2”
and 2” NPT Thread Size
Page 13
G o l f
P r o d u c t s
C a t a l o g
K
Page 14
RAIN BIRD BRASS ELECTRIC VALVE
K E E L I N G C O M PA N Y
RAIN BIRD PESB VALVE
K
Page 15
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Available in over 400
configurations, Please specify length, inlet and outlet
size and tread type
• Superior Flow Characteristics—An
innovative swept elbow design* reduces
pressure loss by 50 percent over other
swing joints.
• Excellent Structural Integrity—
Reduces the costs associated with fatiguerelated failures.
• Double O-ring Protection—Provides a
better seal to ensure that joints are kept
clean and can be repositioned easily.
• Modified ACME Outlet—Improves
safety by losing seal engagement before
losing thread engagement during rotor removal.
• Color-coding and Distinct Size Markings—Reduce costs by eliminating errors
and improving installation efficiency with
quick size identification at the job site.
• Oversized Threaded Inlets—Make
hand-tightening and blind installations
(underwater) easier. This also reduces the
risk of potential damage caused by overtightening with a wrench.
Price: Call For Pricing
Order #: SJ-(X)X-XXX-XX-
Page 16
SWING JOINTS
K E E L I N G C O M PA N Y
QUICK COUPLER
KEYS
Quick Coupling
Valve Keys
K E E L I N G C O M PA N Y
K
G o l f
P r o d u c t s
C a t a l o g
Available in 3/4”, 1”, and 11/2” sizes. Sizes are typically stamped in the brass.
Rain Bird Universal Hose Adapter
Simply remove snap ring from any Rain Bird Rotor and Insert
Adapter, then replace snap ring and you’ll have a quick coupler
anywhere you have a sprinkler.
Order #: UHA
Type: Fits any Rain Bird Sprinkler.
Page 17
G o l f
P r o d u c t s
C a t a l o g
K
Rain Bird Hose Swivels
Models: SH-0, SH-1, SH-2, and SH-2
Specifications:
•
SH-0: 3/4" (20/27) female pipe thread3/4" (20/27) male hose thread
•
SH-1:1" (26/34) female pipe thread3/4" (20/27) male hose thread
•
SH-2:1" (26/34) female pipe thread1" (26/34) male hose thread
•
SH-3:1 1/2" (40/29) female pipe thread1" (26/34) male hose thread
Order #: SH-0, SH-1, SH-2
Type: Specify Hose Size and Key Size
Order#: LS-120
Model: Fits 5RC QC Valve
Page 18
QUICK COUPLER SWIVELS
K E E L I N G C O M PA N Y
GOLF HOSE AND HYDRANT
K E E L I N G C O M PA N Y
K
G o l f
P r o d u c t s
Premium Golf Hose
Made of clear PVC polymer reinforced with nylon tire cord to be compatible with most water soluble
Ag chemicals. Lightweight and kink resistant. Premium brass male/female garden hose couplings. Reels
easily. Working pressure 150 psi. Burst pressure 450 psi. I.D 1". Length 100 ft. USA made.
Price: Call For Pricing
Order #: Specify Hose End Size
and Total Length
FROST-FREE HYDRANT
A Lever Control*
Order #: AF7501
Type: 1” FIPT
E
Extra Thick Walled Head Casting
B Draw Straps
F Pivot Connector with Two Nuts*
C Stainless Steel Operating Rod*
D
Heavy-Duty Solid Brass Hose Adapter
G No Exposed Threads
H Extra Thick Walled Valve Body
I
L Swivel Parts*
Patented Plunger Arrangement*
K Stainless Steel Spring*
Page 19
J 3/8L Beveled Bibb Washer
G o l f
Price:
Call For Pricing
P r o d u c t s
C a t a l o g
K
Air, Water and Electrical needs all in one source.
Price:
Call For Pricing
Electric Cord Reel—
Towable Hose Reel Trailer—
Price:
Call For Pricing
Composite Hose Reel—
Heavy-Duty Hose Reel—
Price:
Call For Pricing
Poly Hose Reel—
Page 20
RAIN BIRD HOSE REELS
K E E L I N G C O M PA N Y
UNDERGROUND HOSE REEL
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
K
**NEW** BELOW-GROUND HOSE REEL
Price: Call For Pricing
Order #: Specify Hose End Size
and Total Length
Page 21
G o l f
P r o d u c t s
C a t a l o g
K
Page 22
SATELLITE
CONTROLLERS
SATELITTE
CONTROLLERS
K E E L I N G C O M PA N Y
SATELLITE CONTROLLERS
K E E L I N G C O M PA N Y
K
Page 23
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
SATELLITE
SATELITTECONTROLLERS
CONTROLLERS
K
K
K E E L I N G C O M PA N Y
C a t a l o g
Page 24
SATELLITE CONTROLLERS
K
Page 25
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 26
SATELITTE CONTROLLERS
K E E L I N G C O M PA N Y
CENTRAL CONTROL SYSTEMS
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
Page 27
G o l f
P r o d u c t s
STRATUS LT CENTRAL CONTROL
K E E L I N G C O M PA N Y
C a t a l o g
COURSE LOG SCREEN
Functional
• Operates up to 19 golf holes.
• Basic software operates hard-wired satellite system, radio-operated or decoder-based system.
• Satellites per system: 28 maximum.
• Decoders per system: up to 200 single decoder addresses and 400 solenoids.
• All programming, execution of field commands, station timing and data logging done at the central computer.
• Continuous on-line communication between central and field units — provides true central control.
• All data logging maintained at the computer for instant review and retrieval.
• QuickIRR™ programming provides for a quick and easy method to automatically build programs to meet your irrigation
challenges.
Software Options.
• Smart Pump™ links your pump station to your central control system providing real-time communication and optimizing
your irrigation cycle. Smart Pump also has the ability to monitor and react to changes in station capacity. Should pump
capacity increase or decrease, the software adjusts the irrigation cycle based on this change.
• FREEDOM™ System lets you operate your central while you are out on the course.
• FREEDOM-Pad™ works with the FREEDOM System to give you remote graphical control of the system.
Page 28
STRATUS II CENTRAL CONTROL
K
K E E L I N G C O M PA N Y
G o l f
Functional
• Operates up to 27 golf
holes.
• Basic software operates
hard-wired satellite system, radio-operated
(Link) satellite system or
decoder-based system.
• Satellites per system: 56
maximum in standard
configuration. 168 with
hybrid module.
• Decoders per system: up
to 500 single decoder addresses and 1,000 solenoids.
• Communication medium:
two-wire, 24 VAC, voltage-regulated signal for
hard-wired satellite system and decoder-based
system. Two-way radio
communication for radiooperated (Link) system.
• All programming, execution of field commands,
station timing and data
logging done at the central computer.
• Continuous on-line communication between central and field units provides true central control.
P r o d u c t s
C a t a l o g
MAP DMA SCREEN SHOT
COURSE MONITOR SCREEN
Page 29
G o l f
P r o d u c t s
C a t a l o g
K
Functional
• Operates up to 54 golf holes.
• Basic software operates
hard-wired satellite system,
radio-operated (Link) satellite
system or decoder-based
system.
• Satellites (two-wire) per
system: 224 maximum in
standard, 336 in hybrid mode.
Satellites (Link) per station:
112 maximum in standard,
224 in hybrid mode.
• Decoders per system: 1,500
single decoder addresses and
3,000 solenoids in hybrid
mode. Systems greater than
500 single decoder addresses
require additional LDI’s and
hybrid system.
“SYRINGE PROGRAM IN 5 CLICKS”
Software Options
• Smart Weather™ Software allows the same communication as regular Weather
Software, but also allows user
to set and reprogram the data
logger of the weather station
to activate alarms based on
user-defined conditions for
any of the instruments, i.e.,
rainfall, wind speed,
temperature, humidity, etc.
• Station Layers-Map/
Operation—allows for the
turning on/off of different
map layers, and also the
station resolution for
monitoring, altering station
properties, or programming.
“VISUALLY MONITOR ALL HYDRAULICS”
• Smart Pump™ links your pump station to your central control
system providing real-time communication and optimizing your
irrigation cycle. Smart Pump also has the ability to monitor and react
to changes in station capacity. Should pump capacity increase or
decrease, the software adjusts the irrigation cycle based on this
change (optional).
• Map Utilities make the irrigation map useful for measurement
and area calculations.
Page 30
NIMBUS II CENTRAL CONTROL
K E E L I N G C O M PA N Y
CIRRUS CENTRAL CONTROL
K E E L I N G C O M PA N Y
K
G o l f
P r o d u c t s
C a t a l o g
“ONE CLICK ACCESS TO PROGRAM LIST”
“VISUALLY MONITOR ALL STATION ACTIVITY”
Page 31
G o l f
P r o d u c t s
C a t a l o g
K
Rain Bird Golf takes a quantum leap in irrigation technology with the easy-to-use Cirrus™ central control system.
With more than 5 years of field operation, Cirrus allows
you to control your irrigation system with more precision
than ever before. Like Rain Bird’s Nimbus™ II and Stratus™ II, this multi-management central control system
takes advantage of the newest Microsoft® Windows® operating system with advanced graphics and 32-bit architecture. With state of- the-art ET-based scheduling, customized course graphics, multiple mapping options and the
ability to “see” the placement and operation of individual
rotors, Cirrus makes controlling your irrigation system fast
and easy. Install Confidence, Install Cirrus.
Advanced Graphical Tracking
Cirrus lets you see your course like no other
central control system can. Incorporating maps
generated by GPS technology and CAD,* Cirrus can graphically recreate your course with
actual irrigation system layouts down to individual rotors. Then, with true 32-bit graphics,
you can “zoom-in” to monitor every detail of
your course. Just double-click on a rotor for a
complete status report. A tree-view control
allows you to visualize and manipulate programs and schedules with the support of visual
graphics, colorized text and color references.
Map utilities provide measurement and area
calculations from the map.
Functional
• Operates up to 54 golf holes.
• Basic software operates hard-wired satellite
system, radio-operated (Link) satellite system,
decoder-based system or combination of any
two communication designs in hybrid installation.
• Satellites (two-wire) per system: 224 satellites in standard and 336 in hybrid mode. Satellites (Link) per system: 112 in standard and
336 in hybrid mode.
• Decoders per system: up to 2,000 single decoder addresses and 4,000 solenoids. Systems
greater than 500 single decoder addresses require additional LDIs and a hybrid system.
Page 32
CIRRUS CENTRAL CONTROL
K E E L I N G C O M PA N Y
CIRRUS CENTRAL CONTROL
K E E L I N G C O M PA N Y
K
G o l f
P r o d u c t s
C a t a l o g
Page 33
G o l f
P r o d u c t s
C a t a l o g
K
Page 34
CIRRUS CENTRAL CONTROL
K E E L I N G C O M PA N Y
RAIN BIRD DECODER SYSTEMS
K E E L I N G C O M PA N Y
G o l f
K
P r o d u c t s
C a t a l o g
DECODER SYSTEM OVERVIEW
Central PC
2-Wire Path
Decoder
Freedom Handheld Radio
Electric
Valve
Eagle Rotor 700E
Decoder
Page 35
Eagle Rotor 700B
Block System
G o l f
P r o d u c t s
C a t a l o g
K
What Is A Decoder?
• A Decoder is a remote control device used to operate a valve.
• Decoders are located out on the golf course taking
the place of satellite controllers.
• Decoders have many control and testing functions
built-in.
• Decoders are waterproof & rated for direct burial.
DECODER ADVANTAGES
•Simple to install
Less Field Wire
•Up to 80% less field wire
•Architectural elegance
VS
•Vandal Resistant
•Impervious to Insects
•Economical to service
•Very expandable and flexible
Decoders
Controllers
•In many cases, less expensive
SIMPLE TO INSTALL
VS
MILES OF CONTROL WIRE
Page 36
RAIN BIRD DECODER SYSTEMS
K E E L I N G C O M PA N Y
FREEDOM HAND-HELD SYSTEM
K
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
FREEDOM™ System Features and Benefits
• Two-way Communication with Rain Bird Central
Audio response at radio indicates command received by
central.
• Station and Program Based Commands Provides
the flexibility to turn ON or OFF any station or an entire
area with the click of a few buttons.
• FREEDOM-based Commands Recorded at Central
Irrigation activity logged at the central whether stations
turned ON with FREEDOM System or with central.
• Optional Flo-Manager® Bypass Permits FREEDOM
user to bypass Flo-Manager.
• Optional Operating Window Allows user to define
FREEDOM usage hours, which helps superintendents to
control irrigation activity.
Page 37
C a t a l o g
Radio Features and Benefits
LCD DisplayThe backlighting high-resolution dot
matrix 12-character display
furnishes the user with a simple easy-to-read interface.
• High Quality Audio
Output Equipped with an
extra-large 1.58-inch speaker
that delivers a half-watt of audio power for robust clarity.
• Extra-Long Battery
Life1100 mAh batteries deliver more than nine (9) hours
of operating time on a single
charge (5-5-90 duty).
• Wide/Narrow Channel
Bandwidth Each channel can
be programmed for wide or
narrow bandwidth operation.
• Radio Warranty Two-year
warranty.
G o l f
P r o d u c t s
C a t a l o g
K
Map-Based System Compatibility
With maps transferred directly from your Rain
Bird Cirrus™, Nimbus™ II, Stratus™ II or
Stratus
LT central, the FREEDOM-Pad provides
complete station, program and/ or schedule
operation. The command based functions like,
Turn On, Turn Off, Advance, Pause, Resume,
and schedule-based operations are activated
with a tap of the stylist. All commands are sent
directly to the central control computer and
properly administered according to your
systems hydraulic conditions.
DATABASE CHANGES IN THE
PALM OF YOUR HAND
•
•
On the course, changes like
Runtime, ET adjust, Station adjust, Cycle+Soak™ time can be
made anywhere as the situation
is identified.
In the office, the FREEDOM-Pad
automatically updates the
changes made in the field
through synchronization with
the central control computer
Page 38
FREEDOM—PAD HAND HELD PC
K E E L I N G C O M PA N Y
WEATHER STATION PRODUCTS
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
K
Price: Call For Pricing
Order #: Call For Specs
Page 39
G o l f
P r o d u c t s
C a t a l o g
K
PVC Pressure Pipe and Fittings
Typical applications: Submersible pumps, jet pumps,
water service lines, farm and ranch water systems,
construction and excavations, industrial application,
irrigation, swimming pools, sprinkler systems, well
pipe and casing, municipal water systems
Products
PVC Pressure Pipe SDR-26 & SDR-21
PVC Pressure Pipe SCH-40 & SCH-80
PVC Pressure Pipe Gasket Joint
Page 40
GOLF IRRIGATION PVC PIPE
K E E L I N G C O M PA N Y
GOLF IRRIGATION PIPE
K
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
A
V
A 2” & Up
I
L
A
B
L
E
KEELING DELIVERS
Page 41
G o l f
P r o d u c t s
GOLF IRRIGATION PVC CEMENT & CLEANERS
K
K E E L I N G C O M PA N Y
C a t a l o g
Clear PR-2
Clear PVC Primer
Pipe Lube
Gasket PCV Lube
Jim PR-1
Purple PVC Primer
Homer™ 828
Gray, Heavy Duty Glue
HOT Cement
Fast Acting 2” or Smaller
#5 Pipe Sealant
PVC, galvanized, aluminum,
soft set thread sealant
PETE Cement
Medium Body Fast Setting
#100 Pure Teflon
100% Pure virgin Teflon paste
GOLD Cement
Slow Set, Heavy Body
Wide Teflon Tape
Teflon tape 3/4” x 24’
Page 42
GOLF IRRIGATION PVC TOOLS
K
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
VC-0242
Features:
•
MCC Pipe cutters are designed especially for clean shearing
cuts to PVC and polyethylene pipe.
The blades are made of special alloy steel and carefully heattreated for long service life.
The hooked jaw holds pipe firmly in cutting position.
Blade, ratchet and spring have a rust-free finish.
Blades are easily replaceable.
3/4 to 11/4” PVC Cutting
•
KWIKCUT PVC CUTTERS
•
T100/SS Cuts P.E. Rubber Hose & PVC up to 1”
•
T135/SS Cuts P.E. and Rubber Hose through 11/2”,
Sch40 up to 11/4”
Order #:T100-SS
•
•
•
•
Order #:VC-0242
Order #:T135-SS
B A H C O P VC SAW
Order #:KC5982
18” BRAXCO
ALUMINUM SAW
•
Aluminum Handle Knuckle Guard
•
Cuts: PVC, Plaster Board, Masonite, etc...
Order #:97575
Order #:PS1000
Page 43
K
G o l f
P r o d u c t s
SPEARS FITTINGS
K E E L I N G C O M PA N Y
C a t a l o g
SPEARS® Schedule 40 PVC fitting designs combine years of proven
experience with computer generated stress analysis to yield the optimum physical structure and performance for each fitting. Material
reinforcement is uniformly placed in stress concentration areas for
substantially improved pressure handling capability. Resulting
products are subjected to numerous verification tests to assure the
very best PVC fittings available.
Full 1/4” Through 12” Availability
Spears® comprehensive line of PVC fittings offers a variety of injection molded configurations in Schedule 40 sizes 1/4” through 12” conforming to ASTM D 2466.
Spears® Swing Joint Riser Assemblies are precision engineered for
use in turf and landscape irrigation applications. Molded to a
strong Schedule 80+ design from high quality PVC, Spears® Swing
Joint Riser Assemblies offer full 360° adjustment on three planes,
and are available in a variety of inlet/outlet combinations in 1”, 11/4” and 1-1/2” ASTM IPS; 1”, 1-1/4” and 1-1/2” BSP Threaded;
32mm, 40mm and 50mm DIN; and 25mm, 32mm, and 40mm JIS.
Engineered to provide positive grip and ease of installation. High
quality and reliability have made Spears® insert fittings the preferred choice for irrigation and O.E.M. applications. A wide variety
of PVC insert configurations and adapters are available for use with
polyethylene pipe sizes 1/2” through 4”, plus 6” & 8” Couplings and
Adapters for lay-fl at type irrigation hose. Special 3/8” barbed configurations allow clamp-free connection to 1/2” I.D. polyethylene
irrigation hose.
Page 44
SPEARS FITINGS
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
K
A high quality, economical, quarter-turn shut off valve designed
for irrigation, pool and spa and many OEM applications.
Available in IPS sizes 1/2” through 6”, with choice of either
socket or threaded end connectors.
•
Multi-function Telescoping Design
•
Socket x Socket Configuration for Pipe Repair or Use as a ShortStroke Expansion Joint
•
Spigot x Socket Configuration for Replacing Damaged Fittings
•
Both Configurations can be Easily Modified for Opposite Use
•
Available in PVC White, PVC Gray and CPVC
•
Double O-ring Seal in EPDM or genuine Viton®
•
1/2" - 2" Pressure Rated to 235 PSI @ 73°F (23°C)
•
2-1/2" - 4" Pressure Rated to 200 PSI @ 73°F (23°C)
•
6" Pressure Rated to 150 PSI @ 73°F (23°C)
•
1/2” to 6” IPS Sizes
•
Designed for Quick Connections, System Modifications or Repairs
•
Completely Redesigned for Improved Versatility
•
PVC White plus New Industrial PVC Gray
•
Easy-Thread Compression Nut
•
1/2” to 6” IPS Sizes
Page 45
G o l f
438
P r o d u c t s
C a t a l o g
K
STANDARD FITTINGS
SIZING CONFIGURATIONS
437
401
409
402
412
408
21/2 X 1 = 289
1/2 X 3/8 = 073
21/2 X 11/4 = 290
3/4 X 1/2 = 101
21/2 X 11/2 =
291
1 X 1/2 = 130
1 X 3/4 = 131
430
11/4 X 1/2 = 166
435
429
439
1/2 X 1/4 = 072
410
407
11/4 X 3/4 = 167
21/2 X 2 = 292
1/2” = 005
3 X 1 = 335
3/4” = 007
3 X 11/4 = 336
1” = 010
11/4 X 1 = 168
3 X 11/2 = 337
11/2 X 1/2 = 209
3 X 2 = 338
11/4” =
012
11/2 X 3/4 = 210
3 X 21/2 = 339
11/2 X 1 = 211
11/2” =
015
4 X 2 = 420
2” = 020
11/2 X 11/4 = 212 4 X 21/2 = 421
417
420
2 X 3/4 = 248
447
464
448
406
Snap Saddle
463
436
450
2 X 1/2 = 247
Snap Saddle
2 X 1 = 249
3” = 030
4 X 3 = 422
4” = 040
6 X 3 = 530
6” = 060
6 X 4 = 532
2 X 11/4 = 250
2 X 11/2 = 251
8” = 080
8 X 4 = 582
Example
Style
Size
438 - 248
Page 46
SPEAR SCHEDULE 40 GLUE FITTINGS
K E E L I N G C O M PA N Y
LEEMCO FITTINGS
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
Bend 90, 45, 22, and 11 degrees
C a t a l o g
K
3” – 12” Saddles with 1”, 1.5” and
2” female NPT threaded outlet
Tee One-piece or assembled
Bell x MPT (male thread adapter)
Bell x Bell and Spigot x Bell (SBR) reducers
Leemco fittings: superior bell design
Plug, Tapped plug and Cap Tapped caps and side outlet caps
Service Tee (Tapped Tee) and Repair coupling
The unique deep “slant” bell design allows the pipe
to deflect within the bell end of the fittings up to 5
degrees in all directions, relieving stress on the
pipe that might be snaked through a trench (up,
down and sideways).
This unique feature also makes installation easier.
Trenches do not have to be cut precisely. Leemco
fittings allow +/- 5 degree on each end. This
means that a 45 degree bend fits within a trench cut
of 35 to 55 degrees.
Price: Call For Pricing
Order #: Call For Specs
Page 47
K
G o l f
P r o d u c t s
C a t a l o g
LEEMCO JOINT RESTRAINT FITTINGS
LH-Series... (2”-16”)
Set consists of two half clamps and hardware
that attaches PVC pipe to Leemco ductile iron
fittings.
LB-Series... (2”-16”)
Set consists of four half clamps, two tie-bars and
hardware that restrains a bell-spigot PVC pipe
connection.
LPP-Series…(4” – 8”)
Set consists of two half clamps and hardware
that restrains a bell-spigot PVC pipe connection.
LGK-Series... (2”-12”)
Set consists of two half clamps, two tie-bar and
two SB-Links that attach to a Leemco fitting and
on the opposite end to the PVC pipe to restrain
a gate valve in between.
LG-Series... (2”-12”)
Set consists of four half clamp, two tie-bars and
hardware that attach to pipes on the opposite
sides of a bell x bell gate valve.
LMJ-Series... (2”-12”)
Set consists of two half clamps, two LS-MJ link
Price: Call For Pricing
Order #: Call For Specs
Page 48
LEEMCO JOINT RESTRAINT FITTINGS
K E E L I N G C O M PA N Y
LEEMCO LATERAL ANGLE VALVES
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
K
Price: Call For Pricing
Order #: Call For Specs
Price: Call For Pricing
Order #: Call For Specs
Page 49
G o l f
P r o d u c t s
C a t a l o g
K
Page 50
HARCO PVC FITTINGS
K E E L I N G C O M PA N Y
K E E L I N G C O M PA N Y
HARCO PVC FITTINGS
G o l f
P r o d u c t s
C a t a l o g
K
Page 51
G o l f
P r o d u c t s
C a t a l o g
K
Page 52
HARCO PVC FITTINGS
K E E L I N G C O M PA N Y
HARCO DUCTILE FITTINGS
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
K
Page 53
G o l f
P r o d u c t s
C a t a l o g
K
Page 54
HARCO DUCTILE FITTINGS
K E E L I N G C O M PA N Y
HARCO DUCTILE FITTINGS
K E E L I N G C O M PA N Y
K
Page 55
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 56
CLOW GATE VALVES
K E E L I N G C O M PA N Y
NIBCO VALVES
K E E L I N G C O M PA N Y
K
G o l f
P r o d u c t s
C a t a l o g
T-113-K
Class 125 Bronze Gate Valve
• Screw-in Bonnet - Non-Rising Stem - Solid Wedge Threaded with Cross Handle
• 125 PSI/8.6 Bar Saturated Steam to 353° F/178° C200
PSI/13.8 Bar Non-Shock Cold Working Pressure - Conforms to MSS SP-80
• Size Range - 1/4" - 3"
Page 57
G o l f
P r o d u c t s
K
C a t a l o g
P-619-RW
250 PSI CWP Iron Body Gate Valve
• Bolted Bonnet - Non-Rising Stem - Resilient Wedge
- IPS Push-on ends
• 250 PSI/17.2 Bar Non-Shock Cold Working Pressure
- Conforms to AWWA C509
• Size Range - 2" - 12"
Page 58
NIBCO VALVES
K E E L I N G C O M PA N Y
MATCO-NORCA GATE VALVES
K E E L I N G C O M PA N Y
K
G o l f
P r o d u c t s
C a t a l o g
Page 59
G o l f
P r o d u c t s
C a t a l o g
K
200RTD
Page 60
MATCO-NORCA GATE VALVES
K E E L I N G C O M PA N Y
ADS FABRICATED BASINS
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
K
Page 61
K
G o l f
P r o d u c t s
ADS DRAINAGE PRODUCTS
K E E L I N G C O M PA N Y
C a t a l o g
N-12® dual wall smooth interior pipe
4" through 48" (100 - 1200mm)
diameters, solid or perforated. Watertight
fittings and couplings available in most sizes
Page 62
ADS DRAINAGE PRODUCTS
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
Multiple drainage
applications
ADS pipe has been
used for
decades on farms, golf
courses,
parks and playing
fields to keep surfaces
dry by channeling away excess
Perforated and
underground moisture.
non-perforated
Homeowners
For subsurface water collection or
leaching action, ADS pipe is offered
find it to be an economical, easy-to install
solution to all kinds of residential
drainage problems: downspout
with uniform slots and drilled holes.
run-offs, foundation and window well
Non-perforated pipe is available
drains, driveway culverts, and wet
when water must be moved by gravity
flow from one point to another.
spots on the lawn. ADS single-wall
pipe is also used for highway edge
drains and other construction applications
where economy and durability
are important.
Page 63
K
G o l f
P r o d u c t s
C a t a l o g
K
The 1200NGB™:
The Catch Basin Contractors Have Been Asking For.
NDS is pleased to announce the release of our newest
drainage product, the 1200NGB (Next Generation
Basin). The NGB is a 12” x 12” plastic catch basin with
height-adjustable outlets. This adjustability makes the
NGB the perfect solution for almost any installation.
The NGB saves time in two ways. First, the outlets can
be adjusted to match the height of the pipe, which means
fewer pipe fittings and adjustments. Second, the NGB
itself is easy to adjust and install. And saving time with
the NGB means quicker and more profitable installations.
The NGB was developed based on contractor feedback.
They wanted a catch basin that would be easier to install,
saving them time and money in labor costs.
More than anything else, contractors wanted the ability
to vary the height of the inlet/outlets. The NGB has the
adjustability contractors asked for; it is easy to install and
will save them time and money.
Page 64
NDS NEW PRODUCTS
K E E L I N G C O M PA N Y
NDS TURF PAVEMENT PRODUCTS
K E E L I N G C O M PA N Y
K
G o l f
P r o d u c t s
C a t a l o g
TufftrackTM Grassroad Pavers are a honeycomb cell paver product that allows light to heavy vehicular traffic to drive over turf areas. It prevents soil
compaction, allowing healthy root growth. It may also
be used for erosion control. A tongue and groove
latching system provides quick and secure connections
between the pavers without the need of additional tools
or parts. Tufftrack Grassroad Pavers’ top smooth surface eliminates sharp corners, reducing liability to pedestrians. Tufftrack Grassroad Pavers are the ultimate
product for promoting healthy turf in traffic areas as an
alternative to aesthetically unpleasant concrete or asphalt pavements.
EZ RollTM Grassroad Pavers
The EZ Roll Grassroad Paver is a plastic grass paver that
allows light to heavy vehicular traffic to drive over turf areas.
It prevents soil compaction, allowing healthy root growth
where grass canthrive. The paver is used to stabilize soil and
allows turf to grow in areas that would traditionally have
impervious hardscaping installed. The EZ Roll can be used as a
BMP for NPDES Phase II compliance. This engineer-designed
grasspaver comes in pre-assembled rolls for easy installation.
Page 65
G o l f
P r o d u c t s
C a t a l o g
K
Adapters and Grates — Step by Step Installation
Catch Basins - Step by Step Installation
Page 66
NDS DRAINAGE PRODUCTS
K E E L I N G C O M PA N Y
K E E L I N G C O M PA N Y
NDS CHANNEL DRAINS
G o l f
Page 67
P r o d u c t s
C a t a l o g
K
G o l f
P r o d u c t s
C a t a l o g
K
Page 68
KENYON TOOLS
K E E L I N G C O M PA N Y
KENYON TOOLS
K E E L I N G C O M PA N Y
K
Page 69
G o l f
P r o d u c t s
C a t a l o g
K E E L I N G C O M PA N Y
P r o d u c t s
C a t a l o g
K
Page 70
KENYON TOOLS
G o l f
KENYON TOOLS
K E E L I N G C O M PA N Y
K
Page 71
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 72
KENYON TOOLS
K E E L I N G C O M PA N Y
KENYON TOOLS
K E E L I N G C O M PA N Y
K
Page 73
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 74
KENYON TOOLS
K E E L I N G C O M PA N Y
KENYON TOOLS
K E E L I N G C O M PA N Y
G o l f
K
Page 75
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 76
KENYON TOOLS
K E E L I N G C O M PA N Y
GREENLEE TEST EQUIPMENT
K E E L I N G C O M PA N Y
K
Page 77
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 78
GREENLEE TONE GENERATORS
K E E L I N G C O M PA N Y
GREENLEE MULTIMETERS
K E E L I N G C O M PA N Y
K
Page 79
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 80
GREENLEE TONE GENERATORS
K E E L I N G C O M PA N Y
GREENLEE WIRE LOCATORS
K E E L I N G C O M PA N Y
K
Page 81
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 82
GREENLEE LOCATING TOOLS
K E E L I N G C O M PA N Y
GREENLEE STATION MASTER
K E E L I N G C O M PA N Y
K
Page 83
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 84
GREENLEE LOCATING TOOLS
K E E L I N G C O M PA N Y
TROUBLE SHOOTING EQUIPMENT
K E E L I N G C O M PA N Y
K
Page 85
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 86
GOLF IRRIGATION WIRE
K E E L I N G C O M PA N Y
GOLF IRRIGATION WIRE
K
Page 87
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
It is the responsibility of the installer to connect all electronic irrigation
equipment for which he is responsible to earth ground in accordance with
Article 250 of the National Electrical Code® ( NEC®.) Use grounding
electrodes that are UL® listed or manufactured tomeet the minimum
requirements of Article 250 of the 2005 edition of the NEC®. At the very
minimum, the grounding circuit will include a copper clad steel ground rod,
a solid copper ground plate and 100 pounds of PowerSet® earth contact
material, as defined below and per the following detail. This detail is the
minimum requirement for supplementary grounding of any electronic
equipment. Other details, for a multitude of field situations, are available
form the American Society of Irrigation Consultants, ASIC Guideline
100-2002 (www.asic.org, “Design Guides”.)
Page
GOLF IRRIGATION WIRE
K E E L I N G C O M PA N Y
GOLF IRRIGATION WIRE
K
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
The ground grid components must be installed with the dimensional relationships
shown in the detail below. WIRES, CABLES, AND ELECTRONIC EQUIPMENT
MUST BE INSTALLED OUTSIDE “THE SPHERE OF INFLUENCE” OF THE
GROUNDING ELECTRODES.
Ground rods are to have a minimum diameter of 5/8” and a minimum length of 10
feet. These are to be driven into the ground in a vertical position or an oblique angle
not to exceed 45 degrees at a location 10 feet from the electronic equipment. The rod
is to be stamped with the UL® logo [Paige Electric part number 182007.] A 6 AWG
solid bare copper wire (about 12 feet long) shall be connected to the ground rod by
the installer using a Cadweld GR1161GPLUS ”One-Shot” welding kit [Paige Electric
part number 1820037P.] This wire shall be connected to the electronic equipment
ground lug. The copper grounding plate assemblies shall be 4” x 96” x .0625” [Paige
Electric part number 182199L.]
A 25-foot continuous length (no splices
allowed unless using exothermic welding
process) of 6 AWG solid bare copper wire is to be
attached to the plate by the manufacturer using an
approved welding process. This wire is to be
connected to the electronic equipment ground
lug. If the equipment ground lug only accepts one
wire, connect the second wire to the first with a
brass split bolt, as close to the equipment lug as
possible. The ground plate is to be installed to a
minimum depth of 30”, or below the frost line if
it is lower than 30”, at a location 8 feet from the
electronic equipment and underground wires and
cables.
Page 89
CONTINUES ON NEXT PAGE
G o l f
P r o d u c t s
C a t a l o g
K
Two 50-pound bags of PowerSet“ [Paige Electric part number 1820058] earth
contact material must be spread so that it surrounds the copper plate evenly along
its length within a 6” wide trench. Salts, fertilizers, bentonite clay, cement, coke,
carbon, and other chemicals are not to be used to improve soil conductivity because
these materials are corrosive and will cause the copper electrodes to erode and become
less effective with time. Install all grounding circuit components in straight lines.
When necessary to make bends, make sweeping turns, as shown. When connecting
bare copper wire to the ground lug of electronic equipment, it must be fed through a
dedicated 1.5” plastic sweep ell. The earth-to-ground resistance of this circuit is to
be measured using a Megger®, or other similar instrument, and the reading is to be
no more than 10 ohms. If the resistance is more than 10 ohms, additional ground
plates and PowerSet® are to be installed using ASIC Guidelines 100-2002 (www. asic. org, “Design Guides”.)
It is required that the soil surrounding copper electrodes within the sphere of influence be kept at a minimum
moisture level of 15% (by volume) at all times. All underground circuit connections are to be made using an
exothermic welding process by utilizing products such as the Cadweld PLUS “One-Shot” kits. Solder shall not
be allowed to make connections. In order to ensure proper ignition of the “One-Shot”, the Cadweld PLUS
Control Unit igniter must be utilized [Paige Electric part number 1820040CU]. The 6 AWG bare copper wires
are to be installed in as straight a line as possible, and if it is necessary to make a turn or a bend it shall be done
in a sweeping curve with a minimum radius of 8” and a minimum included angle of 90°. Mechanical clamps
shall be permitted temporarily during the resistance test process, but are to be replaced with Cadweld PLUS
“One-Shot” kits immediately thereafter.
ALL GROUNDING COMPONENTS MUST BE CONNECTED TO THE EQUIPMENT BEFORE ANY
OTHER CONNECTION IS MADE.
Page 90
GOLF IRRIGATION WIRE
K E E L I N G C O M PA N Y
GOLF IRRIGATION WIRE
K
K E E L I N G C O M PA N Y
G o l f
The grounding circuit shown is
Page 91
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 92
GOLF IRRIGATION WIRE
K E E L I N G C O M PA N Y
GOLF IRRIGATION WIRE
K
Page 93
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 94
GOLF IRRIGATION WIRE
K E E L I N G C O M PA N Y
GOLF IRRIGATION WIRE
K
Page 95
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Y
Page 96
GOLF IRRIGATION WIRE
K E E L I N G C O M PA N Y
GOLF IRRIGATION WIRE
K
Page 97
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 98
GOLF IRRIGATION WIRE
K E E L I N G C O M PA N Y
ARMOR VALVE BOXES
K
Page 99
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 100
ARMOR VALVE BOXES
K E E L I N G C O M PA N Y
ARMOR VALVE BOXES
K
Page 101
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 102
FOUNTAINS & AERATORS
K E E L I N G C O M PA N Y
FOUNTAINS & AERATORS
K
Page 103
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 104
FOUNTAINS & AERATORS
K E E L I N G C O M PA N Y
FOUNTAINS & AERATORS
K
Page 105
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 106
FOUNTAINS & AERATORS
K E E L I N G C O M PA N Y
FOUNTAINS & AERATORS
K
Page 107
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 108
FOUNTAINS & AERATORS
K E E L I N G C O M PA N Y
FOUNTAINS & AERATORS
K
Page 109
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
HIGH-FLOW PROPELLER AND NOZZLES
The StrataFlo pump features a unique propeller design instead of the traditional
impeller. This allows the StrataFlo to move significantly higher quantities of water.
Combined with the StrataFlo’s high-flow nozzles, the aeration capabilities are
significantly increased.
EVERYTHING INCLUDED
Every StrataFlo comes complete with float, pump, Command Center, 10 ft. motor lead,
and Quick Disconnect.
Nozzles are purchased separately and are interchangeable, so the unit can be adapted as needs require.
Page 110
FOUNTAINS & AERATORS
K E E L I N G C O M PA N Y
FOUNTAINS & AERATORS
K
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
OASE StrataVator floating fountains have long been regarded as the foremost
solutions for virtually maintenance-free ponds and lakes, in small or large home
and park projects.
CUSTOMIZABLE PATTERNS
Flexibility in nozzle patterns is designed into
StrataVator floating fountains. Changing the pattern
is as simple as replacing the nozzle. This makes it
possible to rotate through patterns and make the
fountain display fit any occasion or surroundings.
Page 111
G o l f
P r o d u c t s
C a t a l o g
K
Page 112
FOUNTAINS & AERATORS
K E E L I N G C O M PA N Y
FOUNTAINS & AERATORS
K
Page 113
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Controlling your Rain Bird®
Pump Station.
Convenient, Remote Computer Access Pump
station settings and controls may be changed
using the touch-screen located on the pump
station, or through remote computer access using Rain Bird Pump Manager™ software. Pump
Manager allows user access to select functions
available at the pump station control panel.
Having a direct link between the pump station
and the irrigation computer allows passwordauthorized service providers the ability to troubleshoot from a remote location.
Make the Connection with Smart Pump,™ the
only solution that operates on your time—
Real Time
Rain Bird was the first to develop computerized
central control, and the first to install a centrally
controlled irrigation system on a golf course.
Rain Bird continues to lead the industry with
Smart Pump™, the only real-time solution on the
market.
Designed to link your pump station with Rain
Bird Central Control Systems, Rain Bird’s Smart
Pump features go far beyond generating alarms.
Smart Pump optimizes irrigation efficiency by
providing direct, real-time communication
between the pump station and the central control
system. Smart Pump continuously monitors
pump station demand and adjusts it according to
field conditions. This direct two-way connection
between the pump station and central control
provides golf course professionals with the
ultimate in fully integrated irrigation control.
Page 114
GOLF PUMP STATIONS & FILTRATION
K E E L I N G C O M PA N Y
GOLF PUMP STATIONS & FILTRATION
K
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
Rain Bird Services When you choose a Rain Bird Pump Station, you not only receive a reliable, high-performance
product, you also receive complete access to the most extensive service and support system available in the irrigation
industry. Each pump station is covered by Rain Bird’s Professional Customer Satisfaction Policy.
In addition you will receive:
• 24/7 Phone Support through the Rain Bird Global Service Plan (GSP). This is your first line of defense for any
pump station questions. A team of Rain Bird service technicians—trained in all aspects of irrigation systems and
pump station operations—is available 24/7 to guide you through the troubleshooting process, and will be able to
remedy most situations over the phone.
• Local Authorized Service Providers who are trained to provide services for Rain Bird's Professional Customer
Satisfaction Policy. Immediate assistance will be dispatched if your issue cannot be resolved over the phone.
Factory-trained service technicians will provide on-site troubleshooting and problem resolution.
• Systems Based Application Engineers who are employed by Rain Bird. This team of irrigation experts is trained
to evaluate your system from reservoir to rotor. They are available to respond on their own or assist Authorized
Service Providers in troubleshooting and rectifying any problem.
• Factory Support from Rain Bird Engineers. A full pump station engineering staff with CAD capabilities is
available for support.
Pump Station Services To extend or enhance the coverage provided by the Professional Customer Satisfaction
Policy, the following service and program options are provided by Rain Bird and its extensive support network:
Winterization Services/Preventative Maintenance• One winterization and one preventative maintenance service
per year—or—two preventative maintenance services per year (if winterization is not required).
• Winterization Service includes draining all water from the pump station and components to prepare for freeze.
(Any freeze damage after winterization will be covered by Rain Bird.)
• Preventative Maintenance includes determining all components are functional, checking motor oil level and
changing if necessary, calibration settings, etc. Preventative maintenance can also be done at the time of seasonal start
up and includes starting the pump station and checking for proper operation.
Premier Pump Station GSP Program• Option to extend duration of Rain Bird Professional Customer
Satisfaction Policy. (Includes Winterization Services / Preventative Maintenance as described above.)
• Includes repair or replacement of any product that fails in normal use within the applicable time period.
• Guaranteed on-site service—plus—guaranteed next-business-day on select parts.
• 25 percent discount for parts not covered.
• Monthly or annual payment plans available.
• Lump sum payment with the pump station qualifies for Rain Bird financing program.
Page 115
G o l f
P r o d u c t s
C a t a l o g
K
Proper filtration and clean water are essential to the efficient operation of today’s irrigation
systems. Trash, algae, sand, silt and other solid contaminants in source waters will lead to plugged
nozzles, silt deposition, inoperative valves, and a significant reduction in overall efficiency. Rain
Bird filtration technology can resolve these problems in your system. Rain Bird® Sand Media
Filters provide reliability, efficiency and long-term economy. Made in the U.S.A., these filters are
designed and manufactured to exacting standards, giving you many years of top performance.
Rain Bird filtration systems are recommended for all systems using reclaimed wastewater for
irrigation.
Page 116
GOLF PUMP STATIONS & FILTRATION
K E E L I N G C O M PA N Y
GOLF PUMP STATIONS & FILTRATION
K
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
MULTIPLE SIZES AVAILABLE
Page 117
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Rain Bird’s Automatic Backwashing Screen Filter provides the ultimate in high-rate screen filter
performance. Powered by source line water pressure, the filter’s patented backwashing valve
system produces a reverse flow to flush the system of entrapped contaminants.
During the brief backwashing cycle, a portion of the clean
water produced by the system is diverted to the filter unit
undergoing backwashing. This reverse flow of filtered water frees contaminants from the filter screens. Each filter
canister is sequentially backwashed until the entire system
is cleaned.
Automatic Monitoring
This filtration system is automatically monitored either on
elapsed time since the last backwashing or pressure differential. This dual monitoring offers the user the flexibility
to assure that filter operation is maintained with high efficiency, low pressure drop and consistent high quality produced water. Rain Bird automatic controls are available
for A/C power, D/C power and solar power applications.
Page 118
GOLF PUMP STATIONS & FILTRATION
K E E L I N G C O M PA N Y
GOLF PUMP STATIONS & FILTRATION
K
Page 119
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 120
GOLF PUMP SUCTION SCREEN
K E E L I N G C O M PA N Y
GOLF PUMP SUCTION SCREEN
K
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
No matter the source of your irrigation water, you need to clear the water of trash and debris that
could block flow, damage the pump station or clog irrigation equipment.
Rain Bird’s galvanized, Self-Cleaning Pump Suction Screen removes trash and debris from water
sources, saving time and money in energy, pumping efficiency and maintenance costs. With a heavy 10mesh stainless steel screen, this model will increase your pump efficiency for many years to come.
The pump suction screen is attached to the end of the pump suction line. All water must pass through
the screen before entering the pump intake pipe. A small, side-stream pump discharge return line
drives two spray bars that continually rotate, jetting water at the screen and blasting debris away.
Made to last, Rain Bird’s Self-Cleaning Pump
Suction Screen’s all-metal construction has a
removable screen drum. There are no exterior
moving parts that can break down or need repair. The unit is completely corrosion resistant
and will not collapse under normal operation.
For added flexibility, Rain Bird’s Self-Cleaning
Pump Suction Screen can be installed at any
angle without affecting operation. It also has a
standard flanged connection (other connections
are available upon request). The included “Y
Strainer” — essential on the water jet supply
line — provides easy access for cleaning and
prevents the spray nozzles from plugging.
Page 121
G o l f
P r o d u c t s
C a t a l o g
K
How do you improve on one of the smartest, most user-friendly central control systems in the industry? Offer a
comprehensive service and support plant hat covers central control components. Rain Bird, the company that pioneered
computer-based central control systems, offers a series of service plans designed to provide extended warranty service and
technical support exclusively for Rain Bird central control systems. Choose from our standard three year plan, or a one or
five year plan, for a GSP package that will meet your needs as well as your budget. Each plan is also available with a Dell
®“P” Series office computer with Rain Bird software installed, tested and ready to use. Annual and monthly payments are
available in some areas.
GSP Service Features
• Toll-Free Support – 5 a.m. to 5 p.m. (PST) normal business days. Rain Bird’s GSP engineering is just
a toll-free call away to answer questions and resolve central control issues.
• pcANYWHERE Remote System Diagnostics – allows GSP engineers to remotely access your central
control computer when issues can’t be resolved over the phone.
• 24-Hour Emergency Paging – gives you access to a GSP engineer any time of the day or night. There
is always someone on call and ready to respond.
• Extended Warranty* – on Rain Bird central control hardware. The GSP warranty covers the Rain Bird
computer, MIM, MIM-X, the FREEDOM™ System repeater, MDI line termination box and Uninterruptible
Power Supply.
• 24-Hour Hardware Replacement – ensures that if any Rain Bird central control hardware component
covered under the GSP warranty becomes inoperable, a loaner will be delivered to your course within 24
hours.
• Discounts For Board Exchange – allows for discounts on replacement of electronic circuit boards
when a “downtime” situation exists.
• Rain Bird Certified Start-Up – provides an on-site inspection by an authorized Rain Bird service
manager to certify that your central control system meets Rain Bird specifications.
• Software Service Packs – give you the newest central control service packs at no extra charge.
• Basic Training – educational materials are provided to members to help you master the most common
functions of your central control system.
• Central Control Software Upgrade Discount – reduces the expense of upgrading your system.
* Note: Rain Bird’s standard and extended warranty is to repair or replace the covered items that fail in normal use.
It does not cover lightning, surge damage, theft or misuse. This commitment to repair or replace is our sole and total warranty.
Rain Bird will not under any circumstances be liable for the incidental or consequential damages ,no matter how they occur.
You can, however, take advantage of the loaner program for replacement equipment while your equipment is being repaired.
Page 122
GOLF SERVICE SOLUTIONS
K E E L I N G C O M PA N Y
GOLF SERVICE SOLUTIONS
K
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
The Rain Bird® Board Exchange Program is
designed to meet your needs for a fast and
dependable supply of electronic circuit boards
when a “downtime” situation demands action.
The program provides quick, easy and dependable
replacement of a damaged circuit board with a
Certified Rain Bird Golf Division Refurbished
Board. A simple phone call to your local Rain Bird
Golf distributor will have the board on its way to
you or your distributor to get your site operating
again as soon as possible.
* All boards must be ordered and purchased through
your local Rain Bird Golf distributor.
1) Each board includes overnight shipping, whenever
possible, within the US (Mon – Friday deliveries only)
and return shipping to Rain Bird. Damaged boards must
be returned within 48 hours or additional charges will be
incurred.
2) All boards include firmware and displays.
Cables, covers and connectors are not included and
Program Features
should be removed from the board being returned to
• Fast, overnight replacement of damaged parts
Rain Bird. All returned boards must be returned with no
• 6-month warranty on all replacement boards
components missing or removed. Extra charges will be
incurred for returning incomplete assemblies.
• Engineering improvements built into all refur3) Orders must be received at Rain Bird GSP Group
bished boards
from the Rain Bird Golf distributor by 1:00 PM (PST) to
• Low, fixed prices with no membership fee reensure same-day shipment by calling 866-GSP-XPRT
quired
(1-866-477-9778) or faxing to (866) 429-5708.
4) Prices are subject to change without notice.
Taxes are not included.
5) Rain Bird will repair or replace at no charge any board exchange product that fails in normal use within the
6-month warranty period. This commitment to repair or replace is our sole and total warranty. Rain Bird will not,
under any circumstances, be liable for incidental or consequential damages, no matter how they occur.
6) The board exchange warranty does not warranty against damage to equipment or exchange boards caused by
lightning or electrical surges. Radios returned for exchange must be narrowband radios.
7) The 6-month warranty period begins upon receipt of the exchange board.
8) No failed exchange board will be considered for warranty replacement if any labels have been removed or defaced.
9) No credit will be issued for any unused exchange board.
10) Every effort will be made to have the items in stock, however, this does not guarantee availability of all items.
11) All items in the Board Exchange Program may be new or refurbished product.
Page 123
G o l f
P r o d u c t s
C a t a l o g
K
CONDITIONS:
*All boards must be ordered and purchased through your local Rain Bird Golf Distributor.
1) Each board includes overnight shipping, whenever possible, within the US (Monday – Friday deliveries only) and return
shipping to Rain Bird. Damaged boards must be returned within 48 hours or additional charges will be incurred.
2) All boards include firmware and displays. Cables, covers, and connectors are not included and should be removed from
the board being returned to Rain Bird. All returned boards must be returned with no components missing or removed.
Extra charges will be incurred for returning incomplete assemblies.
3) Orders must be received at Rain Bird GSP Group from the Rain Bird Golf Distributor by 1:00 PM (PST) to
ensure same-day shipment by calling 866-GSP-XPRT (1-866-477-9778) or faxing to (866) 429-5708.
4) Prices are subject to change without notice. Taxes are not included.
5) Rain Bird will repair or replace at no charge any board exchange product that fails in normal use within the 6-month
warranty period. This commitment to repair or replace is our sole and total warranty. Rain Bird will not, under any
circumstances, be liable for incidental or consequential damages, no matter how they occur.
Page 124
GOLF SERVICE SOLUTIONS
K E E L I N G C O M PA N Y
GOLF RENOVATION SOLUTIONS
K
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
Gain a Competitive Edge
Competition among golf courses has never been more intense than it is today. Golfers have high
expectations for course conditions, and attracting players is a challenge facing nearly every private,
public or municipal course. The better the look and playability of your golf course the more likely you
are to experience success. Because irrigation plays such a critical role in maintaining the
appearance of your course, renovating your current system will help you gain that competitive edge.
Rain Bird is your complete irrigation renovation partner. With the
experience gained from assisting superintendents from around the world,
we can help develop renovation plans that meet the needs of all sizes and
types of golf courses. Whether your goals include system modernization,
improved playability, cost reduction or water regulation, we can help you
plan, justify and implement a cost-efficient renovation package that’s right
for you. Our unique ability to partner innovation with versatility has
helped golf courses from around the world develop solutions for projects
of every size. You can trust that Rain Bird will provide the experience
and expertise needed to help you develop a renovation plan that
works for your golf course.
To ensure that the recommended plan is the right one for you, Rain
Bird starts with a Course Irrigation Assessment. To demonstrate
our desire to be your project partner, we are offering a FREE
Course Irrigation Assessment. When you take advantage of this
offer, the Rain Bird team will have an opportunity to get to know
your current irrigation system, your renovation goals and the
challenges that you face in achieving those goals. This assessment
will also serve as the foundation for the implementation of a cost
effective irrigation package — a package that has the flexibility to
meet your present and future irrigation needs.
Page 125
G o l f
P r o d u c t s
C a t a l o g
K
Rain Bird’s Steps to Renovation Success
Experience has shown us that there are four basic steps to a
successful irrigation renovation, and your Rain Bird team will be
with you every step of the way to make sure that the completed
project meets your renovation goals.
Step 1: Assessment
During your course irrigation assessment, Rain Bird’s irrigation
experts will take the time to learn about your renovation goals,
concerns and budget guidelines. We will walk the course with you
to evaluate your current system capabilities and to enable us to
prepare a solution that successfully meets your goals, is within
budget and provides the flexibility to meet future course irrigation
requirements.
Step 2: Proposed Solution and Financial Analysis
During this step, your team will develop a complete renovation
solution based upon your completed course irrigation assessment,
goals, budgets and timing. We will also help you present and justify
the costs associated with the solution to your management.
Step 3: Design
Rain Bird will partner with you and your other renovation
consultants to make sure the design is accurate and complete. Our
team will also provide guidance and input to ensure the design
offers maximum flexibility to meet your future irrigation needs.
Step 4: Installation
Throughout the entire installation, Rain Bird irrigation specialists will
work with you, your renovation contractors and your maintenance
staff to provide:
Technical expertise
Extensive training
Page 126
GOLF RENOVATION SOLUTIONS
K E E L I N G C O M PA N Y
GOLF FINANCE SOLUTIONS
K E E L I N G C O M PA N Y
K
G o l f
P r o d u c t s
Joe Course
The Best Golf & Country
Club
15 Ridges Club Dr.
Somewhere, TN 37553
C a t a l o g
Finance Letter
Example
Dear Mr. Golf Course:
We are pleased to provide you and your club with this finance estimate for the irrigation system that you are
considering. These payment estimates are for budgeting purposes and are intended to assist your club in
determining the feasibility of a new Rain Bird irrigation system. In our effort to provide valuable information as
you consider your payment options, we have attached two different scenarios with each estimated project cost:.
A schedule for 12 monthly payments per year. This provides an estimate of the monthly payment for a
loan with a term from 36 to 60 months.
A schedule for 6 payments per year. This ‘6 on, 6 off’ structure allows many seasonal operations to better
match cash flows. This option also provides for 36 to 60 month terms.
Please keep in mind that these figures are estimates only for use in evaluating some of the options for your club.
We can tailor the term and payment schedule to fit the specific needs of your operation.
Rain Bird has a great deal of experience in all facets of golf irrigation systems. We believe there are a few items to
consider in making this important decision.
Specifically, what is the objective of the proposed system? Some common objectives are:
Replacement of a worn-out or ineffective system
Need to improve course conditions
Reduce and avoid increasing maintenance costs
Reduce water use and expense
Comply with new water use regulations / restrictions. Use of effluent water is included in this category.
Page 127
G o l f
P r o d u c t s
C a t a l o g
Have you considered how your club is going to pay for this irrigation system? There are usually four choices:
K
Pay cash-does the club have sufficient cash that is unallocated for other projects?
Assess the members-if your club has members; assessment will depend on prior assessment history
and the votes required to pass a new assessment.
or a bank structures this as an operating line of credit neither of which is optimal for most clubs
(ask your Rain Bird distributor for a copy of the Board Room magazine article for greater detail).
Most local banks will not have prior experience in financing golf irrigation systems.
Rain Bird Finance-this program gives your club the advantage of fixed rate, fixed term, uncollateralized borrowing on all the hard and soft costs of your irrigation project. Rain Bird provides
clubs with an experienced irrigation lender that will customize the borrowing of your club regarding all aspects such as down payment, payment frequency, term and residual.
Will the new system save your club money in parts, labor, electricity and water? If so, your superintendent can
quantify these expected savings and create a monthly savings estimate. Subtract this number from the selected
monthly payment to come up with a net payment and divide this net number by the number of rounds or the
number of members. This net cost per round or per member per month is a useful figure to assist owners and
members in valuing this proposed system.
If your club wants to proceed with customized quotations on your project from Rain Bird Finance, we will
need to acquire some information on your club. There are two options,
You can supply the financial information requested or, you can have Rain Bird Finance contact the
appropriate person at your club to secure the financial information. In this case let us know whom
to contact.
The financial disclosure required depends on the dollar size of your proposed project.
If the project is under about $70,000 Rain Bird Finance requests only that you complete the attached
one page credit application, sign and return it to us along with information on your project cost
and requested terms.
If the project is larger than $70,000 we will request the following:
Completed Rain Bird Finance credit application
The complete year end financial statements on your club for the last three years. These statements should be from your accountant and include all notes to those statements. If these
statements are not audited, please include the corresponding three years of federal tax returns.
Example Letter (Continued)
Borrow from a local bank-this option usually requires the club to pledge their real estate as collateral
If the last year-end statement is more than 90 days old, please include the most recent interim
financial statements. These can be internal statements.
If the club is not owned by the members, we will need a current personal financial statement
on each significant financial principal. We would also like their federal tax returns for the
last three years.
Upon receipt of the requested financial information, Rain Bird Finance can provide a formal quotation based
on the customized request of your club. This is provided in the form of a small spreadsheet detailing several
options, cost per member pricing, interest rate and total interest payment over term. This is a useful tool for
your club to make an informed decision on the most appropriate option. If your club would like additional
information on the customized programs provided by Rain Bird Finance, please contact your Rain Bird distributor or you can reach Mike O’Keefe of Rain Bird Finance directly at 800-603-1644.
Page 128
GOLF FINANCE SOLUTIONS
K E E L I N G C O M PA N Y
GOLF TECHNICAL SHEETS
K
Page 129
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 130
GOLF TECHNICAL SHEETS
K E E L I N G C O M PA N Y
GOLF TECHNICAL SHEETS
K
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
Part Circle Rotor
Page 131
G o l f
P r o d u c t s
C a t a l o g
K
Page 132
GOLF TECHNICAL SHEETS
K E E L I N G C O M PA N Y
GOLF TECHNICAL SHEETS
K
Page 133
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 134
GOLF TECHNICAL SHEETS
K E E L I N G C O M PA N Y
GOLF TECHNICAL SHEETS
K
Page 135
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 136
GOLF TECHNICAL SHEETS
K E E L I N G C O M PA N Y
GOLF TECHNICAL SHEETS
K
Page 137
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 138
GOLF TECHNICAL SHEETS
K E E L I N G C O M PA N Y
GOLF TECHNICAL SHEETS
K
Page 139
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 140
GOLF TECHNICAL SHEETS
K E E L I N G C O M PA N Y
GOLF TECHNICAL SHEETS
K
Page 141
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 142
GOLF TECHNICAL SHEETS
K E E L I N G C O M PA N Y
GOLF TECHNICAL SHEETS
K
Page 143
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
GOLF TECHNICAL SHEETS
K E E L I N G C O M PA N Y
C a t a l o g
Page 144
GOLF TECHNICAL SHEETS
K
Page 145
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
G o l f
P r o d u c t s
C a t a l o g
K
Page 146
GOLF TECHNICAL SHEETS
K E E L I N G C O M PA N Y
VENDOR PAGE
K
K E E L I N G C O M PA N Y
G o l f
P r o d u c t s
C a t a l o g
KEELING Preferred Vendors
Page 147
Rain Bird Golf
www.rainbird.com
Matco-Norca
www.matco-norca.com
CLOW Valve
www.clowvalve.com
Nibco Valve
www.nibco.com
Spears Fittings
www.spears.com
Harco Fittings
www.harcofittings.com
Leemco Fittings
www.leemco.com
Kenyon Tools
www.kenyontools.com
Greenlee Equipment
www.greenlee.com
3M Products
www.3m.com
PipeLife PVC
www.pipelife.com
Cresline PVC
www.cresline.com
King Wire Products
www.kingsafety.com
Paige Wire
www.paigewire.com
Aquamaster Fountains
www.aquamasterfountains.com
Oase Fountains
www.oasepump.com
NDS Drainage Products
www.ndspro.com
ADS Drainage Pipe
www.ads-pipe.com
G o l f
P r o d u c t s
C a t a l o g
K
Page
Keeling History
3
Page
50-55
HARCO Fittings
56
CLOW Ductile Valves
Eagle Rotors
4-10
Eagle Tools
11
NIBCO Valves
57-58
Head Trimmer
11
MATCO-NORCA Valves
59-60
Quick Coupler Valves, Keys, Swivels,
Stabilizers
Electric Valves
12,17,18 ADS Drainage Pipe
13-15
61-63
NDS Drainage Products
64-67
Swing Joints
16
KENYON Tools
Shovels, Hammers, Axes, Bars, Tamps, Valve Keys, Scoops,
Rakes, Forks
68-76
Hose Adapter
17
GREENLEE
Meters, Locators, Tone Generators
77-85
Golf Hose
19
Paige Wire
Wire, Grounding, Surge Protection,
86-93
Hydrants
19
Tytewad Power Filters
94
95
Hose Reels
20-21
KING INNOVATION
Wire Connectors, Strippers
Satellite Controllers
22-26
3M Products
Tape, Splice Kits
96-98
Central Control
Software S
27-34
Armor Valve Boxes
99-101
Decoder Systems
35-36
AERATORS & FOUNTAINS
Rain Bird, Aquamaster, Oase
102-113
114-121
Hand Held Controls
37
RAIN BIRD PUMP STATIONS
Media Filters, Screen Filters, Intake Screen
Palm Held Controls
38
GSP Service Plans
122
Weatherstations
39
Board Exchange Program
123
Renovation Solutions
125
Rotor Spec Sheets
129
PVC Pipe
40-41
PVC Cement/Cleaners
42
PVC Cutting Tools
43
SPEARS PVC Fittings
44-46
LEEMCO Joint Restraint Fittings
47-49
Page 148
GOLF PRODUCT INDEX
K E E L I N G C O M PA N Y
ACCOUNT # __________________________
KEELING COMPANY
DATE ____________________________________
ACCOUNT APPLICATION
OWNER OR OFFICER ___________________________________________________________________________________ YRS IN BUSINESS___________________________
BUSINESS NAME_________________________________________________________________________ DL#_____________________________________________________
STREET ADDRESS_________________________________________________________________________________________ ZIP CODE_______________________________
MAILING ADDRESS__________________________________________________________________________________ZIP CODE (9 DIGIT)____________________________
CITY&STATE__________________________________________________________________________COUNTY OR PARISH_________________________________________
PHONE #____________________________ FAX _________________________ EMAIL ADDRESS _______________________________________________________________
STATEMENT NEEDED (Y/N) _________________________________________________ P. O. OR JOB# REQ. (Y/N) _______________________________________________
TYPE OF BUSINESS: ___________________________________ NOTE: JOB NAME AND ADDRESS REQUIRED ON ALL OPEN CONTRACTOR SALES.
SALES CONTACT: _______________________________________________________ACCTS PAY CONTACT: ______________________________________________________
DO YOU HAVE A CONTRACTORS LICENSE (Y/N) ___________ STATE_______#_______________ STATE_______#_______________ STATE_______#_______________
TYPE OF BUSINESS: CORP ________________________________ PARTNERSHIP ________________________________INDIVIDUAL ________________________________
BONDING AGENCY (GIVE NAME AND ADDRESS):
__________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________
LIST FULL NAME AND SS# OF PRINCIPLES.
I/WE PERSONALLY GUARANTEE THE OBLIGATION OF THE ABOVE
YOU ARE AUTHORIZED TO CHECK MY/OUR CREDIT HISTORY.
NAME _________________________ADDRESS_____________________________________SS#______________________________SIGNATURE_________________________
NAME _________________________ADDRESS_____________________________________SS#______________________________SIGNATURE_________________________
NAME_________________________ADDRESS_____________________________________SS#______________________________SIGNATURE_________________________
HAVE YOU BEEN BANKRUPT IN THE LAST 14 YEARS (Y/N) ____________________________IF YES, WHEN ___________________________________________________
DO YOU HAVE ANY UNSATISFIED JUDGEMENTS AGAINST YOU (Y/N) __________________IF YES, WHEN ___________________________________________________
DO YOU HAVE A SALES TAX PERMIT?
SALES TAX#_____________________________STATE_______________________SALES TAX#__________________________ COUNTY ______________________________
SALES TAX#_____________________________PARISH______________________ SALES TAX#___________________________CITY__________________________________
I HEREBY CERTIFY THAT I HOLD THE SALES/TAX PERMIT NUMBER SHOWN ABOVE AND THAT I AM ENGAGED IN THE BUSINESS OF RESELLING THE TANGIBLE
PERSONAL PROPERTY IN REGULAR COURSE OF BUSINESS THAT I PURCHASE FROM KEELING COMPANY. I FURTHER CERTIFY THAT IF ANY SUCH TANGIBLE
PERSONAL PROPERTY IS WITHDRAWN FROM STOCK OR INTENDED FOR MY CONSUMPTION AND USE THAT I WILL REGULARLY REPORT THE APPLICABLE TAX
AS PROVIDED UNDER THE SALES/USE TAX LAW AND REGULATION.
SIGNATURE_______________________________________________________________
PLEASE LIST BELOW 4 TRADE REFERENCES WITH PHONE AND FAX #
(NO CREDIT CARDS OR DEPARTMENT STORES PLEASE)
1. NAME____________________________ PHONE ________________________ FAX ________________________ ACCT #_____________________
2. NAME____________________________ PHONE ________________________ FAX ________________________ ACCT #_____________________
3. NAME____________________________ PHONE ________________________ FAX ________________________ ACCT #_____________________
4. NAME____________________________ PHONE ________________________ FAX ________________________ ACCT #_____________________
LIST YOUR BANK WITH MAILING ADDRESS, PHONE#, PERSON TO CONTACT, ACCOUNT#
________________________________________________________________________________________________________________________________________________________________________
I HEREBY AUTHORIZE THE ABOVE LENDING AGENCY OR BANK TO SUPPLY RELEVANT FINANCIAL INFORMATION CONCERNING MY ACCOUNT TO
SIGNATURE__________________________________________________________________
FOR OFFICE USE ONLY
TERMS ____________________
SC ______________________
PRICE PT. ________________
01/07
TERR. ____________________
TAX ____________________
PM ____________________
CREDIT LIMIT ____________________
SHIP TO REQ. ____________________
D+B ____________________
SIC ____________________
PC ____________________
4227 EAST 43RD STREET – PO BOX 15310 – NORTH LITTLE ROCK, AR 72231-5310
PHONE: 501-945-4511 FAX: 501-945-2766
FIND YOUR GOLF BRANCH
SPRINGDALE
Arkansas
Branches
LITTLE ROCK
BENTONVILLE
1203 Carley Road
8510 Kanis Road
311 Airport Road
(479) 756-9055
(501) 224-2677
(479) 464-7699
FORT SMITH
CONWAY
N. LITTLE ROCK
HOT SPRINGS
JONESBORO
6112 South Zero
825 North Creek Dr.
4227 E. 43rd St.
3727 Malvern Ave.
4104 Stadium Blvd.
(479) 648-3400
(501) 764-1400
(501) 945-4511
(501) 262-2922
(870) 935-0666
Louisiana
SHREVEPORT
COVINGTON
LAKE CHARLES
Branches
9262 Linwood Ave.
311 Holiday Dr.
3090 E. Prien Lake Rd.
(318) 687-9171
(985) 898-2299
(337) 479-2345
Mississippi
JACKSON
TUPELO
Branches
819 Larson Street
1603 Cliff Gookin Blvd.
11228 High Point Cove
(601) 944-0880
(662) 840-4714
(662) 893-8300
Tennessee
JACKSON
BARTLETT
FRANKLIN
Branches
83 North Star Dr.
8060 Stage Hills Blvd.
2013 Columbia Ave.
(731) 660-0440
(901) 383-7800
(615) 595-1177
BATON ROUGE
12319 Industriplex Blvd.
(225) 751-6464
OLIVE BRANCH
GULFPORT
10368 Express Dr.
(228) 897-7722
MURFREESBORO
KNOXVILLE
1539 Warrior Drive
10923 Murdock Drive
(615) 566-5168
(865) 777-9526
WWW.KEELINGCOMPANY.COM