TL082
TL082A - TL082B
GENERAL PURPOSE J-FET
DUAL OPERATIONAL AMPLIFIERS
■ WIDE COMMON-MODE (UP TO VCC+) AND
DIFFERENTIAL VOLTAGE RANGE
■ LOW INPUT BIAS AND OFFSET CURRENT
■ OUTPUT SHORT-CIRCUIT PROTECTION
■ HIGH INPUT IMPEDANCE J–FET INPUT
N
DIP8
(Plastic Package)
STAGE
■ INTERNAL FREQUENCY COMPENSATION
■ LATCH UP FREE OPERATION
■ HIGH SLEW RATE : 16V/µs (typ)
D
SO8
(Plastic Micropackage)
P
TSSOP8
(Thin Shrink Small Outline Package)
ORDER CODE
DESCRIPTION
Part Number
The TL082, TL082A and TL082B are high speed
J–FET input dual operational amplifiers incorporating well matched, high voltage J–FET and bipolar transistors in a monolithic integrated circuit.
Temperature
Range
TL082M/AM/BM
-55°C, +125°C
TL082I/AI/BI
-40°C, +105°C
TL082C/AC/BC
0°C, +70°C
Example : TL082CD, TL082IN
The devices feature high slew rates, low input bias
and offset current, and low offset voltage temperature coefficient.
Package
N
D
P
•
•
•
•
•
•
•
•
•
N = Dual in Line Package (DIP)
D = Small Outline Package (SO) - also available in Tape & Reel (DT)
P = Thin Shrink Small Outline Package (TSSOP) - only available in Tape
& Reel (PT)
PIN CONNECTIONS (top view)
1
2
-
3
+
4
March 2002
8
7
-
6
+
5
1 - Offset null 1
2 - Inverting input 1
3 - Non-inverting input 1
4 - VCC5 - Non-inverting input 2
6 - Inverting input 2
7 - Output 2
8 - VCC+
1/11
TL082 - TL082A - TL082B
SCHEMATIC DIAGRAM
VCC
Non-inverting
input
Inverting
input
1 0 0Ω
2 0 0Ω
Output
1 0 0Ω
30k
1/2 TL082
8.2k
1.3k
35k
1.3k
35k
1 0 0Ω
VCC
ABSOLUTE MAXIMUM RATINGS
Symbol
VCC
Vi
Parameter
TL082M, AM, BM
Supply voltage - note 1)
Input Voltage - note
2)
Vid
Differential Input Voltage - note
Ptot
Power Dissipation
3)
Output Short-circuit Duration - note 4)
Toper
Operating Free-air Temperature Range
Tstg
Storage Temperature Range
1.
2.
3.
4.
2/11
TL082I, AI, BI
TL082C, AC, BC
Unit
±18
V
±15
V
±30
V
680
mW
Infinite
-55 to +125
-40 to +105
-65 to +150
0 to +70
°C
°C
All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the supply voltages where the zero reference
level is the midpoint between VCC + and VCC -.
The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less.
Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the dissipation rating
is not exceeded
TL082 - TL082A - TL082B
ELECTRICAL CHARACTERISTICS
VCC = ±15V, Tamb = +25°C (unless otherwise specified)
Symbol
TL082I,M,AC,AI,AM,
BC,BI,BM
Parameter
Min.
Input Offset Voltage (Rs = 50Ω)
Tamb = +25°C
Vio
DVio
Input Offset Voltage Drift
Input Offset Current - note
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
Iib
Input Bias Current -note 1
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
Max.
3
3
1
10
6
3
13
7
5
Unit
Min.
Typ.
Max.
3
10
mV
TL082
TL082A
TL082B
TL082
TL082A
TL082B
Tmin ≤ Tamb ≤ Tmax
Iio
Typ.
TL082C
13
10
5
100
4
5
100
10
pA
nA
20
200
20
20
400
20
pA
nA
Avd
Large Signal Voltage Gain (RL = 2kΩ, Vo = ±10V)
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
50
25
200
25
15
200
SVR
Supply Voltage Rejection Ratio (RS = 50Ω)
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
80
80
86
70
70
86
ICC
Supply Current, no load
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
Vicm
Input Common Mode Voltage Range
CMR
Ios
±Vopp
SR
V/mV
dB
mA
1.4
2.5
2.5
1.4
±11
+15
-12
±11
+15
-12
Common Mode Rejection Ratio (RS = 50Ω)
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
80
80
86
70
70
86
Output Short-circuit Current
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
10
10
40
10
10
40
RL = 2kΩ
RL = 10kΩ
RL = 2kΩ
RL = 10kΩ
10
12
10
12
12
13.5
10
12
10
12
12
13.5
Slew Rate (Tamb = +25°C)
Vin = 10V, RL = 2kΩ, CL = 100pF, unity gain
8
16
8
16
Output Voltage Swing
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
V
mA
60
60
60
60
V
V/µs
µs
Rise Time (Tamb = +25°C)
Vin = 20mV, RL = 2kΩ, CL = 100pF, unity gain
0.1
0.1
Kov
Overshoot (Tamb = +25°C)
Vin = 20mV, RL = 2kΩ, CL = 100pF, unity gain
10
10
GBP
Gain Bandwidth Product (Tamb = +25°C)
Vin = 10mV, RL = 2kΩ, CL = 100pF, f= 100kHz
Input Resistance
2.5
2.5
dB
tr
Ri
µV/°C
10
1)
%
MHz
2.5
4
1012
2.5
4
1012
Ω
3/11
TL082 - TL082A - TL082B
Symbol
Parameter
TL082I,M,AC,AI,AM,
BC,BI,BM
Min.
THD
en
∅m
Total Harmonic Distortion (Tamb = +25°C),
f= 1kHz, RL = 2kΩ,CL = 100pF, Av = 20dB,
Vo = 2Vpp
Equivalent Input Noise Voltage
RS = 100Ω, f = 1KHz
Phase Margin
Channel Separation
Vo1/Vo2
Av = 100
1.
4/11
Typ.
Max.
TL082C
Unit
Min.
Typ.
Max.
%
0.01
0.01
15
15
nV
-----------Hz
45
45
degrees
120
120
dB
The input bias currents are junction leakage currents which approximately double for every 10°C increase in the junction temperature.
TL082 - TL082A - TL082B
MAXIMUM PEAK-TO-PEAK OUTPUT
VOLTAGE versus FREQUENCY
MAXIMUM PEAK-TO-PEAK OUTPUT
VOLTAGE versus FREQUENCY
MAXIMUM PEAK-TO-PEAK OUTPUT
VOLTAGE versus FREE AIR TEMP.
MAXIMUM PEAK-TO-PEAK OUTPUT
VOLTAGE versus LOAD RESISTANCE
MAXIMUM PEAK-TO-PEAK OUTPUT
VOLTAGE versus SUPPLY VOLTAGE
MAXIMUM PEAK-TO-PEAK OUTPUT
VOLTAGE (V)
MAXIMUM PEAK-TO-PEAK OUTPUT
VOLTAGE versus FREQUENCY
30
25
RL = 10 kΩ
Tamb = +25˚C
20
15
10
5
0
2
4
6
8
10
12
SUPPLY VOLTAGE ( V)
14
16
5/11
TL082 - TL082A - TL082B
LARGE SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION versus FREE AIR TEMP.
INPUT BIAS CURRENT versus FREE AIR
TEMPERATURE
100
1000
15V
10
DIFFERENTIAL VOLTAGE
AMPLIFICATION (V/V)
INPUT BIAS CURRENT (nA)
V CC =
1
0.1
0.01
-50
400
200
100
40
20
10
4
2
1
-25
0
25
50
75
100
V CC = 15V
V O = 10V
125
R L = 2k Ω
-75
-50
-25
DIFFERENTIAL
VOLTAGE
AMPLIFICATION
(left scale)
180
10
90
R = 2kW
L
C L = 100pF
V CC = 15V
T amb = +125°C
1
100
1K
10K
0
100K
1M
10M
250
225
200
175
150
125
100
75
50
25
0
-25
0
25
50
TEMPERATURE (˚C)
6/11
125
-50
-25
0
25
50
75
100
125
75
100
SUPPLY CURRENT PER AMPLIFIER versus
SUPPLY VOLTAGE
SUPPLY CURRENT (mA)
SUPPLY CURRENT (mA)
V CC = 15V
No signal
No load
-50
100
TEMPERATURE (˚C)
SUPPLY CURRENT PER AMPLIFIER versus
FREE AIR TEMPERATURE
-75
75
V CC = 15V
No signal
No load
-75
FREQUENCY (Hz)
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
50
TOTAL POWER DISSIPATION versus FREE AIR
TEMPERATURE
TOTAL POWER DISSIPATION (mW)
DIFFERENTIAL VOLTAGE
AMPLIFICATION (V/V)
LARGE SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE SHIFT versus
FREQUENCY
PHASE SHIFT
(right scale)
25
TEMPERATURE (˚C)
TEMPERATURE (˚C)
100
0
125
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Tamb = +25˚C
No signal
No load
2
4
6
10
12 14
8
SUPPLY VOLTAGE ( V)
16
TL082 - TL082A - TL082B
VOLTAGE FOLLOWER LARGE SIGNAL PULSE
RESPONSE
INPUT AND OUTPUT VOLTAGES
(V)
COMMON MODE REJECTION RATIO versus
FREE AIR TEMPERATURE
COMMON MODE MODE REJECTION
RATIO (dB)
89
R L = 10 kΩ
VC C = 15V
88
87
86
85
84
83
-75
-50
-25
0
25
50
75
100
125
6
4
OUTPUT
0
VCC= 15V
R L = 2 kW
-2
C L= 100pF
Tamb = +25°C
-4
-6
0
0.5
1
1.5
2
2.5
3
3.5
TIME (m s)
TEMPERATURE (˚C)
OUTPUT VOLTAGE versus ELAPSED TIME
EQUIVALENT INPUT NOISE VOLTAGE versus
FREQUENCY
28
70
24
EQUIVALENT INPUT NOISE
VOLTAGE (nV/VHz)
20
90%
16
12
8
V
4
tr
-4
0
0.1
CC
= 15V
R L = 2kΩ
Tamb = +25˚C
10%
0
VCC = 15V
A V = 10
R S = 100 Ω
T amb = +25˚C
60
OVERSHOOT
0.2
0.3
0.4
0.5
0.6
50
40
30
20
10
0
10
0.7
40
100
400
1k
4k
10k
40k 100k
FREQUENCY (Hz)
TIME (µs)
TOTAL HARMONIC DISTORTION versus FREQUENCY
1
TOTAL HARMONIC DISTORTION
(%)
OUTPUT VOLTAGE (mV)
INPUT
2
V VCC = = 15V
15V
CC
A AV V= =1 1
V VO O(rms)
= =6V6V
(rms)
0.4
0.1
0.04
T amb
T amb= =+25˚C
+25˚C
0.01
0.004
0.001
100
400
1k
4k
10k
40k
100k
FREQUENCY (Hz)
7/11
TL082 - TL082A - TL082B
PARAMETER MEASUREMENT INFORMATION
Figure 1 : Voltage Follower
Figure 2 : Gain-of-10 Inverting Amplifier
10k Ω
1k Ω
-
eI
1/2
TL082
eo
RL
CL = 100pF
TYPICAL APPLICATIONS
100KHz QUADRUPLE OSCILLATOR
1N 4148
18k Ω *
-15V
1k Ω
18pF
18pF
1/2
TL082
88.4k Ω
88.4k Ω
6 sin ω t
1/2
TL082
6 cos ω t
1k Ω
18pF
88.4k Ω
1N 4148
18k Ω *
+15V
* These resistors values may be adjusted for a symmetrical output
8/11
TL082 - TL082A - TL082B
PACKAGE MECHANICAL DATA
8 PINS - PLASTIC DIP
Millimeters
Inches
Dim.
Min.
A
a1
B
b
b1
D
E
e
e3
e4
F
i
L
Z
Typ.
Max.
Min.
3.32
0.51
1.15
0.356
0.204
0.020
0.045
0.014
0.008
0.065
0.022
0.012
0.430
0.384
0.313
2.54
7.62
7.62
3.18
Max.
0.131
1.65
0.55
0.304
10.92
9.75
7.95
Typ.
0.100
0.300
0.300
6.6
5.08
3.81
1.52
0.125
0260
0.200
0.150
0.060
9/11
TL082 - TL082A - TL082B
PACKAGE MECHANICAL DATA
8 PINS - PLASTIC MICROPACKAGE (SO)
s
b1
b
a1
A
a2
C
c1
a3
L
E
e3
D
M
5
1
4
F
8
Millimeters
Inches
Dim.
Min.
A
a1
a2
a3
b
b1
C
c1
D
E
e
e3
F
L
M
S
10/11
Typ.
Max.
Min.
1.75
0.25
1.65
0.85
0.48
0.25
0.5
0.1
0.65
0.35
0.19
0.25
Typ.
Max.
0.026
0.014
0.007
0.010
0.069
0.010
0.065
0.033
0.019
0.010
0.020
0.189
0.228
0.197
0.244
0.004
45° (typ.)
4.8
5.8
5.0
6.2
1.27
3.81
3.8
0.4
0.050
0.150
4.0
1.27
0.6
0.150
0.016
8° (max.)
0.157
0.050
0.024
TL082 - TL082A - TL082B
PACKAGE MECHANICAL DATA
8 PINS - THIN SHRINK SMALL OUTLINE PACKAGE
k
c
0.25mm
.010 inch
GAGE PLANE
L1
L
L
L1
C
SEATING
PLANE
E1
A
E
A2
A1
5
4
4
5
D
b
e
8
1
8
1
PIN 1 IDENTIFICATION
Millimeters
Inches
Dim.
Min.
A
A1
A2
b
c
D
E
E1
e
k
l
L
L1
0.05
0.80
0.19
0.09
2.90
4.30
0°
0.50
0.45
Typ.
1.00
3.00
6.40
4.40
0.65
0.60
0.600
1.000
Max.
Min.
1.20
0.15
1.05
0.30
0.20
3.10
0.01
0.031
0.007
0.003
0.114
4.50
0.169
8°
0.75
0.75
0°
0.09
0.018
Typ.
0.039
0.118
0.252
0.173
0.025
0.0236
0.024
0.039
Max.
0.05
0.006
0.041
0.15
0.012
0.122
0.177
8°
0.030
0.030
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from
its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information
previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of STMicroelectronics.
© The ST logo is a registered trademark of STMicroelectronics
© 2001 STMicroelectronics - Printed in Italy - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia
Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States
© http://www.st.com
11/11