Job Name: __________________________ Catalog #: __________________________ Type: ______________________________ Notes: _____________________________ LED LightBar Series Spec Sheet: AS-130904 A Profile 1” 25.4mm LightBar Extrusion and mounting clip shown at actual size Housing: 1 1/8”W x 5/8”H (29mm x 16mm) paintable, extruded aluminum channel with a choice of acrylic lenses and end caps. Specify lengths from nominal 1’ to 10’ increments or 0.5 meterto 2.5 meter increments. Consult factory for custom lengths. 11/16” 17.5mm 1 1/8” 28.5mm Description: The LED LightBar Series is an ideal solution for illuminating indoor and outdoor coves, signage, building accents, awnings, shelves, or anywhere a low profile linear light source is required. The LightBar A profile linear lighting system utilizes remote Class II power supplies, and can be wall or ceiling mounted. This profile may be configured as a single fixture or as a multiple fixture system. Choice of LED color temperatures and light outputs provide the proper color and the right amount of light for any installation while a choiceof factory installed lenses and optics can be used solve most lighting requirements. A1 Lens (light grey) A2 Lens (dark grey) shown at actual size 1 7/8” 47.6mm 1” 25.4mm Finish: Available in standard satin aluminum. Consult factory for optional paint finishes. Mounting: Easy snap-in stainless steel, flush mounting clips, included. Consult factory for othermounting options. Lamps: Select from High (7 watts, 650 lumens/ft.), Medium (4 watts, 320 lumens/ft.), or Low (2.5 watts, 188 lumens/ft.) output Cree Easy White®, 2 step binned LEDs for 2700°k to3500°k or Easy White®, 4 step binning for 4000°k and 5000°k color temperatures. LEDs are offered in either ≥70 or ≥80 CRI. Potting of the LED light engine in the aluminum extrusion provide impermeability to liquids and submersible up to 3 feet (1 meter). UL Listed Wet Location / IP67 Rated. Wiring: Fixture is outfitted with a proprietary light engine that includes an input cable with quick connector on one end for attachment to the Class II power supplies, ordered separately, and a connection cable with connector on the opposite end for connection to another LightBar. Lens and Beam Options: Choice of a low profile (A1) or “U” shaped (A2) acrylic lens available in Clear or White. The Clear lens allows selection of factory installed, engineered optics to customize the light beam angle. Other Options: D – Dimming: Optional dimming module allows control of the light and smooth dimming down to 10% with standard Electronic Low Voltage (ELV) dimmers and dimming modules. Compliances: UL Listed Damp or Wet Locations – IP67 Rated We reserve the right to change details of design, materials and finish. White Lightning Fixtures, LTD | 1512 Blandwood Drive | High Point, NC 27260 | Phone: 336-505-8533 | whitelightninghk.com -1- Job Name: __________________________ Catalog #: __________________________ Type: ______________________________ Notes: _____________________________ LED LightBar Series CCT Adjust Factors Spec Sheet: AS-130904 A Profile CRI Adjust Factors 114% = 5000°k 100% = 4000°k 95% = 3500°k 88% = 3000°k 81% = 2700°k FC Adjust Factors H= 100% M= 50% L= 30% 100% = 70 CRI 95% = 80 CRI Photometrics: Example: LB-A0AF-04F-50H7-00 7 Watt , 650 lumens / ft, 5000°k, ≥ 70 CRI, 120° x 120° LightBar Load Chart (watts) Length (FT) 1’ 2’ 3’ 4’ 5’ 6’ 7’ 8’ 9’ 10’ H 7 14 .5 (610mm) 1.0 (915mm) 21 28 1.5 (1524mm) 35 2.0 (1830mm) 42 49 2.5 (2440mm) 56 63 70 Length (M) M 3 5 7 9 11 13 15 17 19 21 Cone of light 50,000 L 2 4 6 8 10 12 14 16 18 20 100,000 Distance Fc Beam Dia. 8” 12” 18” 115 29 13 18” 38” 54” 150,000 200,000 250,000 300,000 Report No: Output lumens: 2600 CCT: 4000° Input watts: 28 watts Efficacy: 93 lumens/ watts CRI: 70 min Beam Diameter is where footcandles drop 50% of maximum Ordering Information- Example: LB-A1AF-04F-35H8-C3-D LB Series LB- Lightbar 01 - A F Finish A- Anodized Profile A0- HLB extrusion, no lens A1- HLB w/ low profile lens A2- HLB w/ "U" shaped lens Mounting F- Flush/ Surface mount 1 - 0101 - 1 CCT 27- 2700°K 30- 3000°K 35- 3500°K 40- 4000°K 50- 5000°K R CRI 7- ≥ 70 8- ≥ 80 Power H- High (650 lumens/ ft.) M- Medium (320 lumens/ ft.) L- Low (188 lumens/ ft.) Length 01F-10F- In1’ increments 05M-25M- In 500mm increments 1 - R Options W- Wet Location/ IP67 Rated D- Dimming Lens Characteristics 00- No lens- AO profile only (120° x 120°) WT- White CL- Clear 120° x 120° C1- Clear w/ 20°x20°optics C2- Clear w/ 38°x38°optics C3- Clear w/ 21°x45°optics CC- Custom Color- To be spec’d White Lightning Fixtures, LTD | 1512 Blandwood Drive | High Point, NC 27260 | Phone: 336-505-8533 | whitelightninghk.com -2-