M Collection
Wall-mount vanity
18’’ height
Furniture
Wall-mount vanity M 2418 WM – 1 drawer – 24” length
21 7/8’’ depth x 23 9/16’’ length x 18’’ height – 557 x 598 x 457 mm
n finishes and colors
n 45 degree bevel cuts precluding the need for drawer hardware
oak
natural
white
wenge
light grey
blue steel
sand
hemp
smoked
matte lacquer*
white
light grey
blue steel
sand
hemp
walnut
natural
chocolate
high gloss lacquer**
white
n all natural wood veneer on dimensionally stable MDF core
n AWI rated level 5 marine grade finish for moisture resistance and
durability (industry’s highest finishing class)
n finished vanity interiors in addition to front and sides finished vanity
interiors in addition to front and sides
n solid maple dovetailed drawer
n divider for storage
n drawer within a drawer
n slow closing ball bearing glides
n special wall preparation recommendations
The distance between studs should not exceed 16”. Each stud should
be reinforced vertically by 2” x 3” wooden studs and horizontally with
2” x 6” wooden studs at a height of 30” all along the width of the vanity.
*ATTENTION: Vessel sink not recommended with this finish
**ATTENTION: High-Gloss finish on sides and drawer facade only.
Bottom and interior in white mat. This finish should only be ordererd
with an integrated countertop (vessel sink not recommended)
WETSTYLE cannot be held responsible for any
technical errors and reserves the right to make
revisions without notice.
Approximate measurement.
The manufacturer accepts ¼” (6.35mm) variance.
R04/13
www.WETSTYLE.CA - Montreal - Canada
Tel. 450.536.9000 - 1 888.536.9001 - Fax. 450.536.0202
Compatible Integrated Countertop for M 2418 WM vanity (countertop sold separately)
Cube Collection Lavatories_22” depth x 24” length x 2” height - 559 x 610 x 51 mm
VCS 24
Ove Collection Integrated Countertop_22” depth x 24” length x 2” height - 559 x 610 x 51 mm
VOVS 24
Also compatible with the following WETSTYLE vessel sink models:
VBE821A, VC815A, VC821A, VOV815A, VOV821A, VCR821A, VTP821A
WETSTYLE cannot be held responsible for any
technical errors and reserves the right to make
revisions without notice.
Approximate measurement.
The manufacturer accepts ¼” (6.35mm) variance.
R04/13
www.WETSTYLE.CA - Montreal - Canada
Tel. 450.536.9000 - 1 888.536.9001 - Fax. 450.536.0202
M Collection
Wall-mount vanity
18’’ height
Furniture
Wall-mount vanity M 3618 WM – 1 drawer – 36” length
21 7/8’’ depth x 35 5/8’’ length x 18’’ height – 557 x 905 x 457 mm
n finishes and colors
n 45 degree bevel cuts precluding the need for drawer hardware
oak
natural
white
wenge
light grey
blue steel
sand
hemp
smoked
matte lacquer*
white
light grey
blue steel
sand
hemp
walnut
natural
chocolate
high gloss lacquer**
white
n all natural wood veneer on dimensionally stable MDF core
n AWI rated level 5 marine grade finish for moisture resistance and
durability (industry’s highest finishing class)
n finished vanity interiors in addition to front and sides finished vanity
interiors in addition to front and sides
n solid maple dovetailed drawer
n divider for storage
n drawer within a drawer
n slow closing ball bearing glides
n special wall preparation recommendations
The distance between studs should not exceed 16”. Each stud should
be reinforced vertically by 2” x 3” wooden studs and horizontally with
2” x 6” wooden studs at a height of 30” all along the width of the vanity.
*ATTENTION: Vessel sink not recommended with this finish
**ATTENTION: High-Gloss finish on sides and drawer facade only.
Bottom and interior in white mat. This finish should only be ordererd
with an integrated countertop (vessel sink not recommended)
WETSTYLE cannot be held responsible for any
technical errors and reserves the right to make
revisions without notice.
Approximate measurement.
The manufacturer accepts ¼” (6.35mm) variance.
R04/13
www.WETSTYLE.CA - Montreal - Canada
Tel. 450.536.9000 - 1 888.536.9001 - Fax. 450.536.0202
Compatible Integrated Countertop for M 3618 WM vanity (countertop sold separately)
Cube Collection Lavatories_22” depth x 36” length x 2” height -
559 x 914 x 51 mm
VCS 36C
VCS 36L
VCS 36R
VCS 36
Ove Collection Lavatories_22” depth x 36” length x 2” height -
559 x 914 x 51 mm
VOVS 36
Also compatible with the following WETSTYLE vessel sink models:
VBE821A, VC815A, VC821A, VOV815A, VOV821A, VCR821A, VTP821A
WETSTYLE cannot be held responsible for any
technical errors and reserves the right to make
revisions without notice.
Approximate measurement.
The manufacturer accepts ¼” (6.35mm) variance.
R04/13
www.WETSTYLE.CA - Montreal - Canada
Tel. 450.536.9000 - 1 888.536.9001 - Fax. 450.536.0202
M Collection
Wall-mount vanity
18’’ height
Furniture
Wall-mount vanity M 4818 WM – 2 drawers – 48” length
21 7/8’’ depth x 47 5/8’’ length x 18’’ height – 557 x 1210 x 457 mm
n finishes and colors
n 45 degree bevel cuts precluding the need for drawer hardware
oak
natural
white
wenge
light grey
blue steel
sand
hemp
smoked
matte lacquer*
white
light grey
blue steel
sand
hemp
walnut
natural
chocolate
high gloss lacquer**
white
n all natural wood veneer on dimensionally stable MDF core
n AWI rated level 5 marine grade finish for moisture resistance and
durability (industry’s highest finishing class)
n finished vanity interiors in addition to front and sides finished vanity
interiors in addition to front and sides
n solid maple dovetailed drawer
n divider for storage
n drawer within a drawer
n slow closing ball bearing glides
n special wall preparation recommendations
The distance between studs should not exceed 16”. Each stud should
be reinforced vertically by 2” x 3” wooden studs and horizontally with
2” x 6” wooden studs at a height of 30” all along the width of the vanity.
*ATTENTION: Vessel sink not recommended with this finish
**ATTENTION: High-Gloss finish on sides and drawer facade only.
Bottom and interior in white mat. This finish should only be ordererd
with an integrated countertop (vessel sink not recommended)
WETSTYLE cannot be held responsible for any
technical errors and reserves the right to make
revisions without notice.
Approximate measurement.
The manufacturer accepts ¼” (6.35mm) variance.
R04/13
www.WETSTYLE.CA - Montreal - Canada
Tel. 450.536.9000 - 1 888.536.9001 - Fax. 450.536.0202
Compatible Integrated Countertop for M 4818 WM vanity (countertop sold separately)
Cube Collection Integrated Lavatories_22” depth x 48” length x 2” height - 559 x 1219 x 51 mm
VCS 48L
VCS 48R
VCS 48
Compatible Integrated Countertop for M 4818 WM vanity (countertop sold separately)
Ove Collection Lavatories_22” depth x 48” length x 2” height - 559 x 1219 x 51 mm
VOVS 48
Also compatible with the following WETSTYLE vessel sink models:
VBE821A, VBE836A, VC815A, VC821A, VC836A, VOV815A, VOV821A, VOV836A, VCR821A, VTP821A
WETSTYLE cannot be held responsible for any
technical errors and reserves the right to make
revisions without notice.
Approximate measurement.
The manufacturer accepts ¼” (6.35mm) variance.
R04/13
www.WETSTYLE.CA - Montreal - Canada
Tel. 450.536.9000 - 1 888.536.9001 - Fax. 450.536.0202
M Collection
Wall-mount vanity
18’’ height
Furniture
Wall-mount vanity M 6018 WM – 2 drawers – 60” length
21 7/8’’ depth x 60’’ length x 18’’ height – 557 x 1524 x 457 mm
n finishes and colors
n 45 degree bevel cuts precluding the need for drawer hardware
oak
natural
white
wenge
light grey
blue steel
sand
hemp
smoked
matte lacquer*
white
light grey
blue steel
sand
hemp
walnut
natural
chocolate
high gloss lacquer**
white
n all natural wood veneer on dimensionally stable MDF core
n AWI rated level 5 marine grade finish for moisture resistance and
durability (industry’s highest finishing class)
n finished vanity interiors in addition to front and sides finished vanity
interiors in addition to front and sides
n solid maple dovetailed drawer
n divider for storage
n drawer within a drawer
n slow closing ball bearing glides
n special wall preparation recommendations
The distance between studs should not exceed 16”. Each stud should
be reinforced vertically by 2” x 3” wooden studs and horizontally with
2” x 6” wooden studs at a height of 30” all along the width of the vanity.
*ATTENTION: Vessel sink not recommended with this finish
**ATTENTION: High-Gloss finish on sides and drawer facade only.
Bottom and interior in white mat. This finish should only be ordererd
with an integrated countertop (vessel sink not recommended)
WETSTYLE cannot be held responsible for any
technical errors and reserves the right to make
revisions without notice.
Approximate measurement.
The manufacturer accepts ¼” (6.35mm) variance.
R04/13
www.WETSTYLE.CA - Montreal - Canada
Tel. 450.536.9000 - 1 888.536.9001 - Fax. 450.536.0202
Compatible Integrated Countertop for M 6018 WM vanity (countertop sold separately)
Cube Collection Lavatories_22” depth x 60 1/4” length x 2” height - 559 x 1530 x 51 mm
VCS 60L
"
&/#
"&/#
"&/#
"
&/#
"&/#
)41068,(9
"
&/#
"&/#
"
&/#
"&/#
"&/#
5,'(8,(9
VCS 60R
"
&/#
"
&/#
?
"?
&/
#
2.$08,(9
"&/#
"&/#
"
&/#
"
&/#
"
&/#
"&/#
"
&/#
"
&/#
"
&/#
"&/#
"&/#
5,'(8,(9
"
&/#
16(5
999
1064($.$0$'$
(. $:
VCS 60
"?
?
"
&/#
"&/#
"&/#
"&/#
"
&/#
"
&/#
)41068,(9
#
&/
2.$08,(9
7%(B4,(
2241:,/$6(/($574(/(06+(/$07)$&674(4$&&(26<//8$4,$0&(
()(4616(&+0,&$.5+((6)14/14(,0)14/$6,10
!&$0016%(+(.'4(52105,%.()14$0;6(&+0,&$.(44145
$0'4(5(48(56+(4,*+661/$-(4(8,5,1059,6+176016,&(
16(5
2241:,/$6(/($574(/(06+(/$07)$&674(4$&&(26<//8$4,$0&(
()(4616(&+0,&$.5+((6)14/14(,0)14/$6,10
!&$0016%(+(.'4(52105,%.()14$0;6(&+0,&$.(44145
$0'4(5(48(56+(4,*+661/$-(4(8,5,1059,6+176016,&(
1 1" [130.1cm]
5151
4"4[130.1cm]
1 1" [153.0cm]
6060
4"4[153.0cm]
front
frontview
view
4"4"
[10.2cm]
[10.2cm]
14"
14"
[35.6cm]
[35.6cm]
22" [55.9cm]
22" [55.9cm]
515
16" [15.2cm]
515
16" [15.2cm]
4"4"
[10.2cm]
[10.2cm]
2" [5.1cm]
2" [5.1cm]
(574($2241:,/$6,8((/$07)$&674,(4$&&(26(70(61.B4(0&('(<//
1 1" [43.6cm]
1057.6(4.$),&+(6(&+0,37(21742.75',0)14/$6,105
1717
1 1" [132.7cm]
!0(2(76C64(6(074(52105$%.('(5(44(7456(&+0,37(537,21744$,(065;C64(*.,55B(5
5252
4"4"
[10.1cm]
[10.1cm]
8"8[43.6cm]
4"4[132.7cm]
(65(4B5(48(.('41,6'())(&67(4'(5/1',),&$6,1055$0524B$8,5
1..(&6,10
1'(.1'@.(
&$.(=&+(..(
(574($2241:,/$6,8((/$07)$&674,(4$&&(26(70(61.B4(0&('(<//
1057.6(4.$),&+(6(&+0,37(21742.75',0)14/$6,105
!0(2(76C64(6(074(52105$%.('(5(44(7456(&+0,37(537,21744$,(065;C64(*.,55B(5
(65(4B5(48(.('41,6'())(&67(4'(5/1',),&$6,1055$0524B$8,5
999
1064($.$0$'$
(. $:
VCS 60T
"&/#
"
&/#
"&/#
"
&/#
"
&/#
"
&/#
(45,10
7%(B4,(
1 1" [153.0cm]
6060
4"4[153.0cm]
26"
26"
[66.1cm]
[66.1cm]
1..(&6,10
1'(.1'@.(
&$.(=&+(..(
1 1[43.4cm]
1717
8" [43.4cm]
8"
(45,10
] ]
cmcm
3.83.8
1 "1[Ø
" [Ø
Ø1Ø21 2
4"4"
[10.2cm]
[10.2cm]
22"
[55.9cm]
22"
[55.9cm]
side
sideview
view
33
3" [8.6cm]
38
8" [8.6cm]
plan
planview
view
1313
1414
" [37.7cm]
" [37.7cm]
1616
Also compatible with the following WETSTYLE vessel sink models:
VBE821A, VBE836A, VC815A, VC821A, VC836A, VC848A, VOV815A, VOV821A, VOV836A, VOV848A, VCR821A, VTP821A
www.WETSTYLE.ca
www.WETSTYLE.ca
- Montreal
- Montreal
- Canada
- Canada
Tel.
Tel.
450.536.9000
450.536.9000
- 1- 888.536.9001
1 888.536.9001
- Fax.
- Fax.
450.536.0202
450.536.0202
Notes:
Notes:Approximate
Approximate
measurement.
measurement.The
The
manufacturer
manufacturer
accept
accept
¼"¼"
(6.35mm)
(6.35mm)
variance.
variance.
Refer
Refer
to to
technical
technical
sheet
sheet
forfor
more
more
information.
information.
WETSTYLE
WETSTYLE
cannot
cannot
bebe
held
held
responsible
responsible
forfor
any
any
technical
technical
errors
errors
and
and
reserves
reserves
thethe
right
right
to to
make
make
revisions
revisions
without
without
notice
notice
Mesure
Mesure
approximative.
approximative.
LeLe
manufacturier
manufacturier
accepte
accepte
une
une
tolérence
tolérence
dede
¼"¼"
(6.35mm)
(6.35mm)
Consulter
Consulter
la la
fiche
fiche
technique
technique
pour
pour
plus
plus
d'informations.
d'informations.
WETSTYLE
WETSTYLE
nene
peut
peut
être
être
tenu
tenu
responsable
responsable
des
des
erreurs
erreurs
techniques
techniques
quiqui
pourraient
pourraient
s'ys'y
être
être
glissées
glissées
et et
sese
réserve
réserve
le le
droit
droit
d'effectuer
d'effectuer
des
des
modifications
modifications
sans
sans
préavis.
préavis.
WETSTYLE cannot be held responsible for any technical errors and reserves the right to make revisions
without notice. Approximate measurement. The manufacturer accepts ¼” (6.35mm) variance.
R04/13
Cube
Cube
- Série
- Série
VCS
VCS
6060 Collection
Collection
Model/Modèle
VCS
VCS60T
60T Model/Modèle
3/4"
3/4"
= 1'-0"
= 1'-0" Scale/Échelle
Scale/Échelle
R.03/12A
R.03/12A Version
Version
www.WETSTYLE.CA - Montreal - Canada
Tel. 450.536.9000 - 1 888.536.9001 - Fax. 450.536.0202
M Collection
Wall-mount vanity
18’’ height
Furniture
Wall-mount vanity M 7218 WM – 3 drawers – 72” length
21 7/8’’ depth x 72’’ length x 18’’ height – 557 x 1829 x 457 mm
FP
FP
FP
'UDZHU)DFHV
FP
FP
FP
'UDZHU)DFHV
FP
FP
'UDZHUV
FP
SODQYLHZ
IURQWYLHZ
n finishes and colors
FP
VLGHYLHZ
n 45 degree bevel cuts precluding the need for drawer hardware
oak
natural
white
wenge
light grey
blue steel
sand
hemp
smoked
matte lacquer*
white
light grey
blue steel
sand
hemp
walnut
natural
chocolate
high gloss lacquer**
white
n all natural wood veneer on dimensionally stable MDF core
n AWI rated level 5 marine grade finish for moisture resistance and
durability (industry’s highest finishing class)
n finished vanity interiors in addition to front and sides finished vanity
interiors in addition to front and sides
n solid maple dovetailed drawer
n divider for storage
n drawer within a drawer
n slow closing ball bearing glides
n special wall preparation recommendations
The distance between studs should not exceed 16”. Each stud should
be reinforced vertically by 2” x 3” wooden studs and horizontally with
2” x 6” wooden studs at a height of 30” all along the width of the vanity.
*ATTENTION: Vessel sink not recommended with this finish
**ATTENTION: High-Gloss finish on sides and drawer facade only.
Bottom and interior in white mat. This finish should only be ordererd
with an integrated countertop (vessel sink not recommended)
WETSTYLE cannot be held responsible for any
technical errors and reserves the right to make
revisions without notice.
Approximate measurement.
The manufacturer accepts ¼” (6.35mm) variance.
R08/13
www.WETSTYLE.CA - Montreal - Canada
Tel. 450.536.9000 - 1 888.536.9001 - Fax. 450.536.0202
FP
FP
FP
FP
FP
FP
Compatible Integrated Countertop for M 7218 WM vanity (countertop sold separately)
Cube Collection Lavatories_22” depth x 72” length x 2” height - 559 x 1829 x 51 mm
VCS 72
72" [182.9cm]
18" [45.7cm]
13" [37.7cm]
1416
22" [55.9cm]
side view
36" [91.4cm]
18" [45.7cm]
16" [40.6cm]
4" [10.2cm]
22" [55.9cm]
55
8" [14.3cm]
14" [35.6cm]
3" [8.6cm]
38
4" [10.2cm]
8" [20.3cm]
Ø1 1
2 " [Ø3.8
cm]
plan view
8" [20.3cm]
20" [50.8cm]
16" [40.6cm]
20" [50.8cm]
2" [5.1cm]
1" [140.4cm]
554
72" [182.9cm]
front view
72" [182.9cm]
20" [50.8cm]
14" [35.6cm]
13" [37.7cm]
1416
22" [55.9cm]
side view
32" [81.3cm]
20" [50.8cm]
4" [10.2cm]
8" [20.3cm]
22" [55.9cm]
5" [14.3cm]
58
4" [10.2cm]
3" [8.6cm]
38
VCS 72T
8" [20.3cm]
cm]
5 " [Ø4.2
Ø1 8
plan view
56" [142.2cm]
1" [140.4cm]
554
72" [182.9cm]
front view
8" [20.3cm]
2" [5.1cm]
8" [20.3cm]
Also compatible with the following WETSTYLE vessel sink models:
VBE821A, VBE836A, VC815A, VC821A, VC836A, VC848A, VOV815A, VOV821A, VOV836A, VOV848A, VCR821A, VTP821A
WETSTYLE cannot be held responsible for any technical errors and reserves the right to make revisions
without notice. Approximate measurement. The manufacturer accepts ¼” (6.35mm) variance.
R08/13
www.WETSTYLE.CA - Montreal - Canada
Tel. 450.536.9000 - 1 888.536.9001 - Fax. 450.536.0202