Rapid temperature change (damp heat) vibration comprehensive test chamber 1 Technical specifications Main technical parameters Implementation standards Temperature range : -70~ +150 Deg C GB/T5170.2-2008 Temperature test equipment Up-and-down temperature range: -55~ +70 Deg C GB/T5170.5-2008 Thermal Humidity test equipment (C) Temperature fluctuation: ≤±0.5 ℃ GB/T2423.1-2008(IEC68-2-1) testing A, Low temperature Temperature uniformity: ≤2.0 ℃ test method Temperature deviation: ≤±2.0 ℃ GB/T2423.2-2008(IEC68-2-2) testing B, High temperature Humidity deviation: ≤±3.0%RH (over75%RH) test method ≤±5.0%RH (lower than 75%RH) GB/T2423.3-2006(IEC68-2-3) testing Ca, Constant thermal Temperature and humidity control method: BTHC humidity test (C) Ambient temperature: +5~+35℃ GB/T2423.4-2008(IEC68-2-30) testing Db, Thermal humidity Power(V): AC 380±10%V 50HZ±0.5HZ test (C) Equipment noise: ≤75 dB(testing from one meter GJB150.3A-2009(MIL-STD-810F-2000) High Temperature test in front of the door) GJB150.4A-2009(MIL-STD-810F-2000) Low Temperature test Standard configuration: Electrothermal film glass observation 1pcs; Cable hole (Φ100) 1 PCS; Sample rack 2 sets; Illuminator 1 pcs; Sample power control terminal 1pcs; (C), only C type equipment equipment with this. Temperature and humidity control chart General Type Low humidity Type 2 Data sheet Model Unit Volume L SM-KS190-70-5 SM-KS190-40-5 SM-KS335-40-5 190 SM-KS190-70-5 SM-KS600-40-5 335 SM-KS600-70-5 SM-KS990-40-5 600 SM-KS990-70-5 SM-KS1540-40-5 990 SM-KS1540-70-5 1540 Temperature Test Parameters Temperature range ℃ Temperature fluctuation ℃ ±0.1℃~±0.5℃ Temperature uniformity ℃ ±0.5℃~±2.0℃ Heating/cooling rate %r.h -40/+180 -70/+180 -40/+180 7.5/7.5 7.0/8.0 6.5/6.8 -70/+180 -40/+180 6.8/6.7 6.0/6.5 -70/+180 -40/+180 -70/+180 -40/+180 -70/+180 6.1/6.7 6.1/6.0 6.0/6.3 6.0/5.0 6.0/6.0 Climate test parameters Temperature range ℃ +10~+95 %r.h 10~98 Dew point temperature ℃ -3~94 Humidity fluctuation %r.h ±1.0~±3.0 Temperature fluctuation ℃ ±1~±3 Temperature uniformity ℃ Inner dimension Width ×epth× height mm 580×450×750 580×765×750 800×800×950 1100×950×950 1100×1475×950 External dimensions Width ×epth× height mm 870×1280×1775 870×1595×1775 1090×1660×1995 1390×1855×1995 1390×2380×1995 Humidity range power rated power 400V±10%,50HZ,3/N/PE KW 8 10 8 10 11 cooling method 17 23 23 26 26 Water-cooled chamber 10℃/min Model SM-KS270-40-10 SM-KS270-70-10 SM-KS480-40-10 SM-KS480-70-10 SM-KS800-40-10 SM-KS800-70-10 SM-KS1300-40-10 SM-KS1300-70-10 Model SM-KS270-40-15 SM-KS270-70-15 SM-KS480-40-15 SM-KS480-70-15 SM-KS800-40-15 SM-KS800-70-15 SM-KS1300-40-15 SM-KS1300-70-15 chamber 15℃/min volume liter 270 480 1300 800 Temperature Test Parameters temperature range Model -40/+180 -70/+180 -40/+180 -70/+180 Temperature fluctuation ℃ ±0.3~±0.8 Temperature uniformity ℃/min ±0.5~±2.0 -40/+180 -70/+180 -40/+180 -70/+180 Heating/cooling rate ℃/min 10.0/12.5 10.0/14.5 10.0/12.5 10.0/11.0 12.0/12.0 12.0/12.0 12.0/11.5 11.0/10.5 Heating/cooling rate ℃/min 16.0/16.0 17.0/18.0 16.0/18.0 17.0/15.0 16.0/18.0 16.0/15.5 16.0/17.0 16.0/14.5 Climate test parameters temperature range ℃ +10~+95 Humidity range %r.h 10~95 Dew point temperature ℃ -3~+94 Humidity fluctuation %r.h ±1.0~±3.0 Temperature fluctuation ℃ ±0.1~±0.5 Temperature uniformity ℃ ±0.5~±1.0 Inner dimension Width × depth × height mm 580×620×750 External dimensions Width × depth × height mm 870×1980×1775 power Supply Power cooling method 3 800×650×950 1100×800×920 1100×1300×920 1090×2480×2025 1390×2675×2020 1390×3200×2020 400V±10%,50HZ,3/N/PE KW 8/12 14/16 16/20 20/24 water cooling 28/35 34/44 28/35 34/44 34/44 SUPER STSAR series features CLIMATE STSAR series has advanced features in terms of uniformity of temperature variation Customer first 1. Rapid change temperature test chamber realize that using the specimen temperature to control the slope. In order to maintain a fixed sample temperature change ratio, we adopt the sample temperature control technology, rapid temperature change technology and slope control technology and so on. 2. Climate for you to open a new generation industry standards test chamber. Products Features 1. Large viewing angle and full heating observation window 2. High stability full color touch screen 3. Pin holes on both sides 4. Sample holder capable of conveniently adjusting height 5.Triple independent over temperature protection 6. Safety sample terminal 7. Disassemble operation panel for easy maintenance Fan Power Distribution Cabinet Test area evaporator The humidification water tank Refrigeration system SM-KS-190-40-5 Temperature change rate The lowest temperature is -40 test are volume are 270L 480L,800L,1000L Rapid temperature change test chamber Code SANWOOD Brand logo 4 Structure characteristics Structure design 4 Pin hole Super large observation window 1. Shell: Spray galvanized color steel plate, the surface electrostatic spray processing 2. Liner: stainless steel SUS 304 3. Thermal insulation layer: Polyurethane foam board and glass fiber 4. Seal: Toshiba high purity silicon ubber raw materials, effectively prevent aging 5. Heater: Ni Cr alloy electric heater Φ100mm (standard equipment) Φ50mm Φ80mm Φ160mm (optional equipment) Pure water purifying device(C) Observation window: Visual range: W400*H600mm Compressed air drier (optional) 6. Humidifier: Outer tube: SUS316 stainless steel seamless pipe Internal heating wire: Ni Cr alloy wire. 7. Sample holder: 40kg/ layer * 2 layer ( standard configuration ) 80kg/ layer ; 120kg/ layer Total bearing ≤ 240 kg (optional) 5 Water purifier 75L Inner glass door (optional) Operation sample hole on the glass (No display on the picture) In the experimental process, adsorption drying filter used to dehumidification to prevent the surface of the sample to condense. Refrigeration system Refrigeration design Mute cover Solenoid valve 1.Modular production, reliable quality, easy maintenance. 2. Silver brazing welding vibration pipe with a silver content of 45% , to prevent the welding leak effectively. Italy CASTEL Refrigerant 3. Adequate space position, easy to operate. 4. Welding through nitrogen, ensure the inner pipe not nitriding. Germany Bizter compressor (standard) 5. Take a variety of techniques to decouple shock. R404A R23(-70) Ozone depletion index was 0 Denmark DANFOSS brand 6. Take a variety of techniques to anti-corrosive. Pressure relay America EMERSON or Denmark DANFOSS Germany compressor (option) Mute cover: reduce noise 10 db (option) Evaporator Custom efficient fin type heat exchanger Condenser Condenser evaporator evaporating pressure regulating valve thermal expansion valve Dry filter Condensing pressure regulating valve (water-cold) 6 Control System Controller Recorder( option) 1. Large screen LED display 2. High reliability of industrial r ecords requirements 2. Waterway 2.1 Heating tube dry. 2.2 Abnormal of water supply. 2.3 Abnormal drainage. 3. Test samples of protection The sample power control terminal 1. 5.7" 640*480 lattice. TFT LCD displayer 2. 1200 programs,program can cycle 3. RS - 485 interface, with remote communication function. 4. SD card storage test data, about 7500 days ( Sampling period: 5min) 5. operating language: Chinese or English 7 1. When the equipment safety protection device works,the power supply of the electrified sample is controlled through the connecting terminal. Safety protection device 1.Compressor 1.1 Compressor overpressure 1.2 Compressor motor overheating 1.3 Compressor motor over-current 1.4 Condenser fan overheating ( air-cold) 1.5 Cooling circulating water pressure shortag (water-cold). 3.1 Adjustable overtemperature protection. 3.2 Air conditioning channel over temperature limit. 3.3 controller set overtemperature shut down alarm. 3.4 sample terminal protection. 4. Electric control 4.1 The fan motor overheating. 4.2 Total power phase sequence and lack of phase protection. 4.3 Leakage protection. 4.4 Load short circuit protection. The Experience you Rely on... Sanwood Environmental Chambers was established in 1995, which integrated Taiwan and Japan technologies. We have been focus on the most secure and reliable climatic test chamber technology since established. And has become a private science and technology enterprises in Dongguan,Guangdong Province, which passed the lSO9001:2008 quality system certification. Our products upgrade constantly and our customers come portable batteries, power batteries, battery, lithium batteries, lead-acid, new energy vehicles, electric bicycles, electric tools, electric systems, solar, military, universities research and other technology industries fields. Having experienced nearly 20 years efforts, we have successfully developed a series of products: power batteries, battery, lithium batteries, lead-acid, new energy vehicles, electric Hightools, and low tem per atursolar, e test ch amb er bicycles,●electric electric systems, military, universities research and ● explosion-pr oof type therm al shock chamber other technology industries fields. ● an explosion-proof typ e tem per atur e test box ● walk-in temperature and hum idity cham ber ● du st test box ● vib ration table ● r ain test chamber ● weather resistance test chamb er ● oz one test box r ● xenon lamp test chambe ● batter y thermal abuse test box ● high tem per atur e oven ● explosion-pr oof type h ot box ● Tem peratur e&hum idity&Vibration integr ated test chamber ● seawater im mersion box All of products meet GB31241、IE62133、QCT/743、UN38.3、UL2054 Standard. And we have had a good cooperation with ATL, Sony, Sunwoda, Desay, Samsung, BYD, Toyota, Yutong Bus, Nissan, Guangdong Province entry-exit, Tsinghua University, Henan University, Chinese Academy of Sciences, Central South University Successively. Enterprise vision: Sanwood Technology has established a large production base in Dongguan after many years efforts. The plant area reached more than 12000 square meters. The foreign trade branch and foreign service agencies were established in 2010. And branches successively established in Taiwan, Suzhou, Hunan, Hubei, Beijing, Henan. Excellent products and good after-sales service make us won the recognition and trust of customers. Products are exported to more than 30 countries, such as Russia, Singapore , the United States, Turkey, Denmark, Vietnam, India, Malaysia, Kazakhstan, Austria, Canada, etc. In the age with fierce competitions, Sanwood thrived little by little and aims to become the leading brand in the safety and reliability environmental test equipment industry all over the world. ADD:Changping Science&Technology park,Changping, Dongguan city,Guangdong province,China Focusing on the innovation of environmental reliability test Sanwood(HK)Industrial Corporation.,Limited Guang dong Sanwood Technology Corporation.,limited TEL:+86+769-81182799 FAX:+86+769-82987199 E-mail:info@climatic-chambers.com.tw www.climatic-chambers.com.tw www.environmental-chambers.ru 8