Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
24
PHOENIX CONTACT
UT... screw connection terminal blocks
The UT... screw connection terminal
blocks from the CLIPLINE complete system
satisfy the most stringent requirements and
cover a wide area of application. They
impress with their maintenance-free
conductor connection and offer maximum
flexibility with their multi-conductor
connection. You can connect conductors
with a nominal cross section either with or
without ferrules. It is not necessary to
tighten the terminal block screws, since
they are prevented from loosening by the
Reakdyn principle, a screw locking
technique developed by Phoenix Contact.
Very large conductor cross sections up to
240 mm2 can also be wired gas-tight and
with long-term stability thanks to the high
contact forces.
Product range overview
2.5 mm2
Feed-through, multi-conductor, and multi-level terminal blocks
and ground terminals
Disconnect and knife disconnect terminal blocks
Diode and LED terminal blocks
Installation terminal blocks
Mini feed-through terminal blocks and ground terminals
4 mm2
Feed-through, multi-conductor, and multi-level terminal blocks
and ground terminals
Fuse terminal blocks and lever-type disconnect terminal blocks
of the same shape
Disconnect and knife disconnect terminal blocks
Test disconnect terminal blocks
Diode terminal blocks
Installation terminal blocks
Mini feed-through terminal blocks and ground terminals
6 mm2
Feed-through terminal blocks and ground terminals
Fuse terminal blocks
Disconnect and knife disconnect terminal blocks
Test disconnect terminal blocks
Installation terminal blocks
10 mm2
Feed-through terminal blocks and ground terminals
Installation terminal blocks
16 mm2
Feed-through terminal blocks and ground terminals
Installation terminal blocks
35 mm2
Feed-through terminal blocks and ground terminals
Installation terminal blocks
50 mm2 - 240 mm2
High-current terminal blocks
31 33 35 36 39 41 43 45 49 50 51 51 53 53 54 56 58 61 61 63 63 65 65 67 Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
PHOENIX CONTACT
25
Terminal blocks - CLIPLINE complete
UT... screw connection terminal blocks
Universal and zero-maintenance
The screw connection is characterized by
three main features.
– Global standard
– Multiple conductor connection
– Zero maintenance thanks to Reakdyn
principle.
Snap-on PE foot
Ground terminals of the same shape are
simply snapped onto the DIN rail in order
to make contact. This mechanically and
electrically efficient contacting meets all the
requirements of the IEC 60947-7-2
standard.
Flexible jumper system
The potential distribution can be
implemented at speed with the
standardized jumpers. Using two bridge
shafts in all terminal blocks makes flexible
chain, level or jumping bridges possible.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
26
PHOENIX CONTACT
Terminal blocks - CLIPLINE complete
UT... screw connection terminal blocks
The reducing bridge enables terminal
blocks with different nominal cross sections
to be connected easily, e.g., a UT 10
terminal block to a UT 2,5. Power blocks
can be created quickly using the reducing
bridge.
The double function shaft can be used to
connect any number of terminal blocks with
two-position bridges. The 2 to 50-pos.
bridges allow up to 50 terminal blocks to be
bridged in one step.
A jumping bridge is created by removing
individual contact guides from the standard
bridge. Two potentials can then be routed
in parallel. The contact points can also be
marked.
The P-FIX isolated feed-through
connector, P-DI isolating plug, P-CO
component connector, and P-FU cartridge
fuse plug can be used in the universal plugin zone of the disconnect terminal block.
A test plug with a 2.3 mm diameter is
available for measuring lines. All
measurement and test work can be
completed at speed using test adapters for
4 mm diameter test plugs and the modular
test plugs.
Large-surface and clear marking of the
terminal points is essential for reliable and
quick installation. Each terminal point in the
UT... series can be marked separately.
Disconnect terminal blocks and feedthrough terminal blocks UT 4-MTD are
available in the same shape as the feedthrough terminal blocks. All terminal blocks
can be continuously bridged with one
another with the double function shaft.
If fully wired, the level offset of the
double-level terminal blocks allows the
lower connection level to be accessed in full
and provides a perfect view of the lower
labeling markers and conductor entry
funnel.
UT-COMBI terminal blocks are available
for creating plug-in signal and power wiring.
The system is touch proof and offers plugs
for self-assembly with extensive
accessories. See “COMBI” section, page
225.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
27
Terminal blocks - CLIPLINE complete
UT... screw connection terminal blocks
UT... feed-through, multi-conductor,
and multi-level terminal blocks
UT... multifunctional terminal blocks
UT... function terminal blocks
– Multi-level terminal blocks with PE pickoff and function level
– Signal processing and protection in a
confined space, thanks to
safety/disconnect lever and universal
function zone
– Double bridge shaft enables individual
potential distribution and supply
– Suitable for process technology, thanks to
Ex nA approval
– Feed-through terminal blocks of the same
shape available
– A wide range of products thanks to
versions with PE function or LED display
– Optimum overview of signal connections
thanks to a variety of marking options
– Modular expansion up to a maximum of
50 positions, as power terminals are the
same shape
– Energy supplied or enhanced by power
terminals
– Convenient separation of circuits using
lever-type disconnect knife, isolating plug
or rotary contact
– User-friendly current measurement
thanks to testing facility either side of the
disconnect point
– Safe operation as the disconnect lever is
locked in the end positions
– Clear identification of the disconnect
point thanks to color highlighting
– Individual assembly with disconnect
element, fuse plug, component
connector, and feed-through connector
 Your web code: #0056
 Your web code: #0075
 Your web code: #0057
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
28
PHOENIX CONTACT
Terminal blocks - CLIPLINE complete
UT... screw connection terminal blocks
UTME... test disconnect terminal
blocks
MUT... miniature terminal blocks
UTI... installation terminal blocks
– Easy and safe operation thanks to clear
indication of switching states
– Maximum functionality – up to six
universal function shafts for potential
distribution or for test purposes
– Modular expansion thanks to feedthrough terminal blocks and ground
terminals of the same shape
– Modular design of transformer circuits
thanks to plug-in test disconnect terminal
blocks
– Reliable protection of connected current
transformers thanks to connector
versions with an integrated, leading shortcircuit contact
– Space saving thanks to compact design
and mounting option on a 15 mm DIN rail
– Clear, as all terminal points are marked
– Easy potential distribution thanks to
standardized jumpers
– Ideal for installation in small control
boxes or terminal boxes, e.g., for motor
connection
– Space saving thanks to compact threelevel distributor terminal blocks of the
same shape for single- and multi-phase
circuits
– Complete flexibility – all installation
terminal blocks with different connection
technologies can be combined
– Dielectric test without disconnecting the
neutral conductor – thanks to the
disconnect slide
– Protection against unintentional actuation
since the disconnect slide can be snapped
into the limit positions
– Easy terminal block mounting without
removing the neutral busbar
 Your web code: #0058
 Your web code: #0059
 Your web code: #0060
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
29
Terminal blocks - CLIPLINE complete
2.5 mm2 UT... screw connection terminal blocks
General technical data for 2.5 mm2 UT... screw connection terminal blocks
Rated data
Rated cross section
Cross section range
Connection capacity
[mm²]
AWG
IEC 60947-7-1 / IEC 60947-7-2
2.5
26 - 12
solid
stranded
1 conductor
[mm²]
0.14 - 4
2 conductors (of the same type)
[mm²]
0.14 - 1.5
2 stranded conductors with a TWIN ferrule
[mm²]
General data
Stripping length
[mm]
9
Screw thread
M3
Tightening torque
[Nm]
0.5 - 0.6
Insulating material
PA
Inflammability class according to UL 94
V0
Note: additional or deviating data is documented for the product.
0.14 - 4
0.14 - 1.5
-
Notes:
Ferrule
without/with plastic sleeve
0.14 - 2.5
0.14 - 2.5
0.14 - 1.5
0.5 - 1.5
In addition to the product, the internal electrical wiring is provided
as a circuit diagram. Free connection points for bridging are
indicated by a black dot.
The specified technical data and approvals refer to the first product
in each column. For information on the products below, please
refer to phoenixcontact.net/products
1) The bridge current is documented for the respective product. For
additional colors, see page 340.
System accessories for 2.5 mm2 UT... screw connection terminal blocks
Number of
positions
2
3
4
5
10
20
Description
① Jumper1)
③ Modular test plug
④ Spacer plate
⑤ Test plug metal part
⑥ Insulating sleeve, for MPS metal part
⑦ Test adapter, 4 mm socket hole
Screwdriver
Color
Type
Order No.
red
red
red
red
red
red
red
red
silver
red
gray
FBS 2-5
FBS 3-5
FBS 4-5
FBS 5-5
FBS 10-5
FBS 20-5
PS-5
DP PS-5
MPS-MT
MPS-IH RD
PAI-4-N GY
SF-SL 0,6X3,5-100 S-VDE
3030161
3030174
3030187
3030190
3030213
3030226
3030983
3036725
0201744
0201676
3032871
1212587
Pcs. /
Pkt.
50
50
50
50
10
10
10
10
10
10
10
10
Type
Order No.
FBSR 2-5
FBSR 3-5
FBSR 4-5
FBSR 5-5
FBSR 10-5
3033702
3001591
3001592
3001593
3033710
⑭ Reducing bridge
⑮ Vertical potential bridge
⑯ Fuse and function plugs for disconnect terminal blocks
For RB ..., see page 344.
For FBS-PV ..., see page 341.
For P-FU ... / P-DI / P-FIX / P-CO ..., see page 349 onwards.
⑰ Partition plates/end cover segments
For ATP-... / DS-..., visit phoenixcontact.net/products
⑱ Cover
⑳ Warning labels
 Lateral groove marking
 DIN rails and end brackets
For full accessories, visit phoenixcontact.net/products
Documented for the product.
For WS ..., see page 353.
UC-TM 5, UCT-TM 5 or ZB 5. See also Catalog 5, selection tables from page 100.
See Catalog 5.
Note: additional or deviating accessories are documented for the product.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
30
PHOENIX CONTACT
Pcs. /
Pkt.
50
50
50
50
10
Terminal blocks - CLIPLINE complete
2.5 mm2 UT... screw connection terminal blocks
Feed-through, multi-conductor, and
multi-level terminal blocks and
ground terminals
Notes:
1)
①
①
②
②
For additional accessories and technical data, see page 30.
For information on installation and using accessories for Ex
applications, see page 602.
32 A, feed-through terminal block and ground
terminal
30 A, feed-through terminal block and ground
terminal, 3 connections

Ex:   EAC Ex 

Ex:   EAC Ex 
KEMA 04ATEX2048 U / IECEx KEM 06.0027U
KEMA 06ATEX0017 U / IECEx KEM 06.0013U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
5.2
47.7
Imax. [A] Umax. [V] 32
1000
24 (FBS) / 17.5 (FBSR) IEC
UL / CUL
1000
600
24 / 2.5
20 / -
Technical data1)
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
CSA
600
20 / -
Ex
690
22 / 2.5
Width
Length
5.2
57.8
Imax. [A] Umax. [V] 30
500
24 (FBS) / 17.5 (FBSR)
IEC
UL / CUL
500
150
24 / 2.5
20 / -
Ordering data
Description
Color
Terminal block
gray
blue
green-yellow
Ground terminal
Type
UT 2,5
UT 2,5 BU
UT 2,5-PE
①
①
②
gray
Feed-through, multi-conductor, and
multi-level terminal blocks and
ground terminals
Notes:
1)
D-UT 2,5/10
CSA
150
20 / -
Ex
352
21 / 2.5
Ordering data
Order No.
3044076
3044089
3044092
Pcs. /
Pkt.
50
50
50
Order No.
①
①
②
3044513
3044526
3044539
Pcs. /
Pkt.
50
50
50
3047141
50
Type
UT 2,5-TWIN
UT 2,5-TWIN BU
UT 2,5-TWIN-PE
Accessories1)
Cover, width 2.2 mm
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
Accessories1)
3047028
50
D-UT 2,5/4-TWIN
①
①
②
②
For additional accessories and technical data, see page 30.
For information on installation and using accessories for Ex
applications, see page 602.
③
30 A, feed-through terminal block and ground
terminal, 4 connections
28 A, double-level terminal block and ground
terminal

Ex:   EAC Ex 

Ex:   EAC Ex 
KEMA 06ATEX0017 U / IECEx KEM 06.0013U
KEMA 06ATEX0017 U / IECEx KEM 06.0013U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
5.2
65.4
Imax. [A] Umax. [V] 30
500
24 (FBS) / 17.5 (FBSR) IEC
UL / CUL
500
150
24 / 2.5
20 / -
Technical data1)
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
CSA
150
20 / -
Ex
352
21 / 2.5
Width
Length
5.2
69.9
Imax. [A] Umax. [V] 28
500
24 (FBS) / 17.5 (FBSR)
IEC
UL / CUL
500
600
24 / 2.5
20 / -
Ordering data
Description
Terminal block
With potential distribution
Ground terminal
Color
gray
blue
gray
green-yellow
gray
gray
Type
UT 2,5-QUATTRO
UT 2,5-QUATTRO BU
①
①
3044542
3044555
UT 2,5-QUATTRO-PE
②
3044568
50
D-UT 2,5/4-QUATTRO
CSA
600
20 / -
Ex
352
20 / 2.5
Ordering data
Pcs. /
Pkt.
50
50
Order No.
Order No.
①
①
②
③
3044636
3044649
3044652
3044665
Pcs. /
Pkt.
50
50
50
50
3047293
3047303
50
50
Type
UTTB 2,5
UTTB 2,5 BU
UTTB 2,5-PV
UTTB 2,5-PE
Accessories1)
Cover, width 2.2 mm
Spacer plate
Height
65 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
Accessories1)
3047170
50
D-UTTB 2,5/4
DP-UTTB 2,5/4
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
31
Terminal blocks - CLIPLINE complete
2.5 mm2 UT... screw connection terminal blocks
Feed-through, multi-conductor, and
multi-level terminal blocks and
ground terminals
Notes:
1)
①
①
②
②
For additional accessories and technical data, see page 30.
③
28 A, double-level terminal block with PE foot

24 A, three-level terminal block and ground
terminal

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
5.2
69.9
Imax. [A] Umax. [V] 28
500
24 (FBS) / 17.5 (FBSR) IEC
UL / CUL
500
600
24 / 2.5
20 / -
Technical data1)
Height
65 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
CSA
600
20 / -
Ex
-
Width
Length
5.2
90
Imax. [A] Umax. [V] 24
500
19 (FBS) / 17.5 (FBSR)
IEC
UL / CUL
500
600
19 / 2.5
20 / -
Ordering data
Description
Color
Terminal block
upper level blue
upper level blue
With potential distribution
Ground terminal
gray
gray
gray
gray
green/yellow
gray
gray
Type
Order No.
UTTB 2,5-PE/L
UTTB 2,5-PE/N
UTTB 2,5-L/N
①
①
②
3044678
3046731
3044681
Multi-level terminal blocks
D-UTTB 2,5/4
DP-UTTB 2,5/4
CSA
600
20 / -
Ex
-
Ordering data
Pcs. /
Pkt.
50
50
50
Order No.
UT 2,5-3L
①
3214259
Pcs. /
Pkt.
50
UT 2,5-3PV
UT 2,5-3PE
②
③
3214262
3214275
50
50
3214314
50
Type
Accessories1)
Cover, width 2.2 mm
Spacer plate
Height
77.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
Accessories1)
3047293
3047303
50
50
①
D-UT 2,5-3L
①
Notes:
1)
For additional accessories and technical data, see page 30.
24 A, three-level terminal block with PE foot
24 A, three-level terminal block with LED
display
 

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
5.2
90
Imax. [A] Umax. [V] 24
500
19 (FBS) / 17.5 (FBSR) IEC
UL / CUL
500
600
19 / 2.5
20 / -
Technical data1)
Height
77.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
CSA
600
20 / -
Ex
-
Width
Length
5.2
90
Imax. [A] Umax. [V] 24
500
19 (FBS) / 17.5 (FBSR)
IEC
UL / CUL
500
600
19 / 2.5
20 / -
Ordering data
Description
Color
Order No.
①
①
3214301
3214291
gray
gray
gray
UT 2,5-PE/L/L
UT 2,5-PE/L/N
Cover, width 2.2 mm
gray
D-UT 2,5-3L
CSA
24
20
Pcs. /
Pkt.
50
50
Type
UT 2,5-3L-LA24RD/O-M
Accessories1)
PHOENIX CONTACT
Order No.
Pcs. /
Pkt.
①
3214288
50
3214314
50
Accessories1)
3214314
50
D-UT 2,5-3L
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
32
Ex
-
Ordering data
Type
Terminal block
upper level blue
Terminal block, with LED for 12 - 30 V DC,
0.7 - 2.4 mA
Height
77.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
Terminal blocks - CLIPLINE complete
2.5 mm2 UT... screw connection terminal blocks
Disconnect and knife disconnect
terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 30.
2)
Current and voltage are determined by the plug used.
20 A, disconnect terminal block
20 A, double-level terminal block with
disconnect zone


Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Nominal current / cross section
[A]
[V]
[A] / [mm²]
[A] / [mm²]
Width
Length
5.2
57.8
Imax. [A] Umax. [V] 202)
4002)
20 (FBS) / 17.5 (FBSR) IEC
UL / CUL
4002)
300
20 / 202) / 2.5
-
Technical data1)
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
CSA
300
16 / -
Ex
-
Width
Length
5.2
69.9
Imax. [A] Umax. [V] 20
400
24 (FBS) / 17.5 (FBSR)
IEC
UL / CUL
400
300
20 / 2.5
16
162) / 2.5 (disconnect level)
Ordering data
Description
Color
Disconnect terminal block
gray
blue
gray
blue
With test socket screws
Type
UT 2,5-TG
UT 2,5-TG BU
UT 2,5-TG-P/P
UT 2,5-TG-P/P BU
①
①
①
①
gray
gray
Disconnect and knife disconnect
terminal blocks
D-UT 2,5/4-TWIN
CSA
-
Ex
-
Ordering data
Order No.
3046388
3046579
3046391
3046582
Pcs. /
Pkt.
50
50
50
50
Order No.
Pcs. /
Pkt.
①
3044644
50
3047293
3047303
50
50
Type
UTTB 2,5-TG-P/P
Accessories1)
Cover, width 2.2 mm
Spacer plate
Height
65 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
Accessories1)
3047141
50
D-UTTB 2,5/4
DP-UTTB 2,5/4
new
①
Notes:
1)
For additional accessories and technical data, see page 30.
16 A, double-level terminal block with two
disconnect zones

Technical data1)
Dimensions
[mm]
Max. electrical data
Rated data
Rated voltage
Nominal current / cross section
[V]
[A] / [mm²]
Width
5.2
Imax. [A] 16
IEC
400
16 / 2.5
Length
80.1
Umax. [V] 400
UL / CUL
300
16
Height
58.1 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
CSA
Ex
-
Ordering data
Description
Color
Terminal block
gray
Type
UTT 2,5-2TG-P/P
①
3044674
Pcs. /
Pkt.
50
3044676
3044677
50
50
Order No.
Accessories1)
Cover, width 2.2 mm
Spacer plate, compensates for level offsets, width
2.5 mm
gray
gray
D-UTT 2,5/4
DP-UTT 2,5/4
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
33
Terminal blocks - CLIPLINE complete
2.5 mm2 UT... screw connection terminal blocks
Disconnect and knife disconnect
terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 30.
20 A, knife disconnect terminal block
24 A, double-level terminal block with
disconnect knife


Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Nominal current / cross section
[A]
[V]
[A] / [mm²]
[A] / [mm²]
Width
Length
5.2
57.8
Imax. [A] Umax. [V] 20
400
20 (FBS) / 17.5 (FBSR) IEC
UL / CUL
400
300
20 / 2.5
20 / -
Technical data1)
Height
49.1 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
CSA
300
16 / -
Ex
-
Width
Length
5.2
69.9
Imax. [A] Umax. [V] 24
400
24 (FBS) / 17.5 (FBSR)
IEC
UL / CUL
400
300
22 / 2.5
16
16 / 2.5 (disconnect level)
Ordering data
Description
Color
Knife disconnect terminal block
gray
blue
gray
blue
With test socket screws
gray
gray
Type
Order No.
UT 2,5-MT
UT 2,5-MT BU
UT 2,5-MT-P/P
UT 2,5-MT P/P BU
①
①
①
①
3046362
3046553
3046375
3046566
Disconnect and knife disconnect
terminal blocks
D-UT 2,5/4-TWIN
CSA
-
Type
UTTB 2,5-MT-P/P
UTTB 2,5-MT-P/P BU
3047141
50
D-UTTB 2,5/4
DP-UTTB 2,5/4
①
For additional accessories and technical data, see page 30.
16 A, double-level terminal block with a
disconnect knife per level, test socket screw

Technical data1)
Dimensions
[mm]
Max. electrical data
Rated data
Rated voltage
Nominal current / cross section
[V]
[A] / [mm²]
Width
5.2
Imax. [A] 16
IEC
400
16 / 2.5
Length
80.1
Umax. [V] 400
UL / CUL
300
16
Height
65 (NS 35/7,5)
max. Ø [mm²]
0.14 - 4
CSA
-
AWG (UL)
26-12
Ex
-
Ordering data
Description
Color
Knife disconnect terminal block
gray
blue
Type
Order No.
UTT 2,5-2MT-P/P
UTT 2,5-2MT-P/P BU
①
①
3044670
3044671
Pcs. /
Pkt.
50
50
3044676
3044677
50
50
Accessories1)
Cover, width 2.2 mm
Spacer plate, compensates for level offsets, width
2.5 mm
gray
gray
D-UTT 2,5/4
DP-UTT 2,5/4
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
34
PHOENIX CONTACT
Order No.
Pcs. /
Pkt.
①
①
3044640
3044641
50
50
3047293
3047303
50
50
Accessories1)
Notes:
1)
Ex
-
Ordering data
Pcs. /
Pkt.
50
50
50
50
Accessories1)
Cover, width 2.2 mm
Spacer plate
Height
65 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
Terminal blocks - CLIPLINE complete
2.5 mm2 UT... screw connection terminal blocks
Diode and LED terminal blocks
①
①
②
②
Notes:
1)
For additional accessories and technical data, see page 30.
32 A, feed-through terminal block and ground
terminal, same shape

0.5 A, diode terminal block, 1N 4007
(1300 V/0.5 A)

Technical data1)
Dimensions
[mm]
Max. electrical data
[A]
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[V]
[A] / [mm²]
Width
Length
5.2
57.8
Imax. [A] Umax. [V] 32
800
24 (FBS) / 17.5 (FBSR) IEC
UL / CUL
800
600
24 / 2.5
20 / -
Technical data1)
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
CSA
600
20 / -
Ex
-
Width
Length
5.2
57.8
Imax. [A] Umax. [V] 0.5
800
24 (FBS) / 17.5 (FBSR)
IEC
UL / CUL
800
600
0.5 / 1
0.5 / -
Ordering data
Description
Color
Terminal block
With test socket screws
Ground terminal
Terminal block, for conducting direction see circuit diagram
gray
blue
gray
blue
green-yellow
gray
gray
Type
UT 2,5-MTD
UT 2,5-MTD BU
UT 2,5-MTD P/P
UT 2,5-MTD P/P BU
UT 2,5-MTD-PE
①
①
①
①
②
gray
Order No.
Diode and LED terminal blocks
Ex
-
3064085
3064108
3064098
3064111
3064124
Order No.
Pcs. /
Pkt.
①
②
3064140
3064137
50
50
3047141
50
Type
UT 2,5-MTD-DIO/R-L
UT 2,5-MTD-DIO/L-R
D-UT 2,5/4-TWIN
CSA
600
0.5 / -
Ordering data
Pcs. /
Pkt.
50
50
50
50
50
Accessories1)
Cover, width 2.2 mm
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
Accessories1)
3047141
50
D-UT 2,5/4-TWIN
①
①
②
②
Notes:
1)
For additional accessories and technical data, see page 30.
③
28 A, double-level diode terminal block,
1N 4007 (1300 V/0.5 A)

28 A, double-level terminal block with two
1N 4007 diodes (1300 V/0.5 A)

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
5.2
69.9
Imax. [A] Umax. [V] 28
500
24 (FBS) / 17.5 (FBSR) IEC
UL / CUL
500
600
24 / 2.5
20 / -
Technical data1)
Height
65 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
CSA
300
1/-
Ex
-
Width
Length
5.2
69.9
Imax. [A] Umax. [V] 28
500
24 (FBS) / 17.5 (FBSR)
IEC
UL / CUL
500
600
24 / 2.5
20 / -
Ordering data
Description
Color
Terminal block, for conducting direction see circuit diagram
gray
gray
gray
gray
gray
Type
UTTB 2,5-DIO/O-U
UTTB 2,5-DIO/U-O
UTTB 2,5-DIO/UL-UR
①
②
③
gray
gray
Order No.
Ex
-
3046650
3046663
3046728
Order No.
Pcs. /
Pkt.
①
②
3046689
3046676
50
50
3047293
3047303
50
50
Type
UTTB 2,5-2DIO/O-UL/O-UR
UTTB 2,5-2DIO/O-UL/UR-UL
D-UTTB 2,5/4
DP-UTTB 2,5/4
CSA
300
1/-
Ordering data
Pcs. /
Pkt.
50
50
50
Accessories1)
Cover, width 2.2 mm
Spacer plate
Height
65 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
Accessories1)
3047293
3047303
50
50
D-UTTB 2,5/4
DP-UTTB 2,5/4
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
35
Terminal blocks - CLIPLINE complete
2.5 mm2 UT... screw connection terminal blocks
Diode and LED terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 30.
2) The
voltage is determined by the light indicator version selected.
28 A, double-level terminal block with LED
display

28 A, double-level terminal block for soldering
in components

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
5.2
69.9
Imax. [A] Umax. [V] 28
242)
24 (FBS) / 17.5 (FBSR) IEC
UL / CUL
242)
600
24 / 2.5
20 / -
Technical data1)
Height
65 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
CSA
24
20 / -
Ex
-
Width
Length
5.2
69.9
Imax. [A] Umax. [V] 28
500
24 (FBS) / 17.5 (FBSR)
IEC
UL / CUL
500
600
24 / 2.5
20 / -
Ordering data
Description
Terminal block, with LED for 12 - 30 V DC,
0.7 - 2.4 mA
for 30 - 60 V DC, 0.8 - 1.8 mA
for 110 - 250 V AC/DC, 0.1 - 0.5 mA
Terminal block, component can be soldered in
Type
Order No.
gray
UTTB 2,5-LA 24 RD
①
3046692
gray
gray
gray
UTTB 2,5-LA 60 RD
UTTB 2,5-LA 230
①
①
3046702
3046715
50
50
gray
gray
UTTB 2,5-BE
Installation terminal blocks
D-UTTB 2,5/4
DP-UTTB 2,5/4
Ex
-
Order No.
Pcs. /
Pkt.
①
3046744
50
3047293
3047303
50
50
Type
Accessories1)
Cover, width 2.2 mm
Spacer plate
CSA
600
20 / -
Ordering data
Pcs. /
Pkt.
50
Color
Height
65 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
26-12
Accessories1)
3047293
3047303
50
50
①
D-UTTB 2,5/4
DP-UTTB 2,5/4
①
Notes:
1)
For additional accessories and technical data, see page 30.
2)
3-pos. termination block.
Assembly instruction:
In order to securely fix the neutral busbar in place, support
brackets must be placed at the beginning and end of each terminal
strip as well as every 20 cm on longer terminal strips.
The corresponding support brackets can be found at
phoenixcontact.net/products
24 A, neutral disconnect terminal block

4 (4) mm², 30 A, three-level terminal block, 1 x L phase
conductor, 1 x N conductor can be disconnected, 1 x PE
  
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Rated cross section
Cross section range
Connection capacity
1 conductor
2 conductors (of the same type)
[A]
[V]
[A] / [mm²]
[mm²]
AWG
[mm²]
[mm²]
Width
Length
5.2
55
Imax. [A] Umax. [V] 24
250
24 (FBS) / 17.5 (FBSR) IEC
UL / CUL
250
24 / 2.5
2.5
26 - 12
solid
stranded
0.14 - 4
0.14 - 1.5
0.14 - 4
0.14 - 1.5
Technical data1)
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 4
CSA
-
Ex
-
Ferrule
without/with plastic sleeve
0.14 - 2.5
0.14 - 2.5
0.14 - 1.5
-
Width
Length
5.2
93.5
Imax. [A] Umax. [V] 2
30 )
400
24 (FBS) / 17.5 (FBSR)
IEC
UL / CUL
400
300
24 / 4
20
4
24 - 12
solid
stranded
0.2 - 4
0.2 - 1.5
0.2 - 4
0.2 - 1.5
Ordering data
Description
Color
Terminal block
blue
gray
Cover, width 2.2 mm
CSA
-
Ferrule
without/with plastic sleeve
0.25 - 2.5
0.25 - 2.5
0.25 - 0.75
-
Order No.
UTN 2,5
①
3245011
Pcs. /
Pkt.
50
Type
UTI 2,5-PE/L/NT
Order No.
Pcs. /
Pkt.
①
3076028
50
3076036
50
Accessories1)
blue
D-UTN
3245079
50 - www.stevenengineering.com
D-UTI/3
Courtesy of Steven Engineering,
Inc. -2,5/10
(800) 258-9200 - sales@steveneng.com
PHOENIX CONTACT
Ex
-
Ordering data
Type
Accessories1)
36
Height
51.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 4
26-12
Terminal blocks - CLIPLINE complete
2.5 mm2 UT... screw connection terminal blocks
Installation terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 30.
2)
3-pos. termination block.
Assembly instruction:
In order to securely fix the neutral busbar in place, support
brackets must be placed at the beginning and end of each terminal
strip as well as every 20 cm on longer terminal strips.
The corresponding support brackets can be found at
phoenixcontact.net/products
4 (4) mm², 30 A, three-level terminal block,
2 x L phase conductor, 1 x PE
4 (4) mm², 30 A, three-level terminal block,
1 x L phase conductor, 1 x N conductor, 1 x PE
  
 
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Rated cross section
Cross section range
Connection capacity
1 conductor
2 conductors (of the same type)
[A]
[V]
[A] / [mm²]
[mm²]
AWG
[mm²]
[mm²]
Width
Length
5.2
93.5
Imax. [A] Umax. [V] 302)
400
24 (FBS) / 17.5 (FBSR) IEC
UL / CUL
400
300
24 / 4
20
4
24 - 12
solid
stranded
0.2 - 4
0.2 - 1.5
Technical data1)
Height
51.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 4
26-12
CSA
-
0.2 - 4
0.2 - 1.5
Width
Length
5.2
93.5
Imax. [A] Umax. [V] 30
400
24 (FBS) / 17.5 (FBSR)
IEC
UL / CUL
400
300
24 / 4
20
4
24 - 12
solid
stranded
Ex
-
Ferrule
without/with plastic sleeve
0.25 - 2.5
0.25 - 2.5
0.25 - 0.75
-
0.2 - 4
0.2 - 1.5
Color
Terminal block
gray
Type
①
UTI 2,5-PE/L/L
gray
Installation terminal blocks
D-UTI/3
-
Ex
-
Ferrule
without/with plastic sleeve
0.25 - 2.5
0.25 - 2.5
0.25 - 0.75
-
Ordering data
Order No.
3076029
Pcs. /
Pkt.
50
Order No.
①
3076030
Pcs. /
Pkt.
50
3076036
50
Type
UTI 2,5-PE/L/N
Accessories1)
Cover, width 2.2 mm
CSA
-
0.2 - 4
0.2 - 1.5
Ordering data
Description
Height
51.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 4
26-12
Accessories1)
3076036
50
①
D-UTI/3
①
Notes:
1)
For additional accessories and technical data, see page 30.
2)
3-pos. termination block.
Assembly instruction:
In order to securely fix the neutral busbar in place, support
brackets must be placed at the beginning and end of each terminal
strip as well as every 20 cm on longer terminal strips.
The corresponding support brackets can be found at
phoenixcontact.net/products
4 (4) mm², 30 A, three-level terminal block,
2 x L phase conductor
4 (4) mm², 30 A, three-level terminal block,
1 x L phase conductor
 
 
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Rated cross section
Cross section range
Connection capacity
1 conductor
2 conductors (of the same type)
[A]
[V]
[A] / [mm²]
[mm²]
AWG
[mm²]
[mm²]
Width
Length
5.2
93.5
Imax. [A] Umax. [V] 2
30 )
400
24 (FBS) / 17.5 (FBSR) IEC
UL / CUL
400
300
24 / 4
20 / 4
24 - 12
solid
stranded
0.2 - 4
0.2 - 1.5
Technical data1)
Height
51.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 4
26-12
CSA
300
20 / -
0.2 - 4
0.2 - 1.5
Width
Length
5.2
93.5
Imax. [A] Umax. [V] 2
30 )
400
24 (FBS) / 17.5 (FBSR)
IEC
UL / CUL
400
300
24 / 4
20 / 4
24 - 12
solid
stranded
Ex
-
Ferrule
without/with plastic sleeve
0.25 - 2.5
0.25 - 2.5
0.25 - 0.75
-
0.2 - 4
0.2 - 1.5
Ordering data
Description
Color
Terminal block
upper level blue
gray
gray
Type
UTI 2,5-L/L
UTI 2,5-L/N
①
①
Courtesy of Steven
gray
D-UTI/3
Engineering,
Inc.
- (800) 258-9200 -
CSA
300
20
-
Ex
-
Ferrule
without/with plastic sleeve
0.25 - 2.5
0.25 - 2.5
0.25 - 0.75
-
Ordering data
Order No.
3076031
3076035
Pcs. /
Pkt.
50
50
3076036
50
sales@steveneng.com
Order No.
①
3076034
Pcs. /
Pkt.
50
3076036
50
Type
UTI 2,5-L
Accessories1)
Cover, width 2.2 mm
0.2 - 4
0.2 - 1.5
Height
51.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 4
26-12
Accessories1)
-
D-UTI/3
www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
37
Terminal blocks - CLIPLINE complete
2.5 mm2 UT... screw connection terminal blocks
Installation terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 30.
2)
3-pos. termination block.
4 (4) mm², 30 A, three-level terminal block,
2 x L phase conductor
4 (4) mm², 24 A, three-level terminal block,
1 x L phase conductor, 1 x N conductor can be
disconnected, 1 x PE
 

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Rated cross section
Cross section range
Nominal current / cross section
Connection capacity
1 conductor
2 conductors (of the same type)
[A]
[V]
[A] / [mm²]
[mm²]
AWG
[A] / [mm²]
[mm²]
[mm²]
Width
Length
5.2
93.5
Imax. [A] Umax. [V] 2
400
30 )
24 (FBS) / 17.5 (FBSR) IEC
UL / CUL
400
300
24 / 4
20 / 4
24 - 12
solid
stranded
0.2 - 4
0.2 - 1.5
0.2 - 4
0.2 - 1.5
Technical data1)
Height
51.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 4
26-12
CSA
300
20 / -
Ex
-
-
Ferrule
without/with plastic sleeve
0.25 - 2.5
0.25 - 2.5
0.25 - 0.75
-
Width
Length
5.2
93.5
Imax. [A] Umax. [V] 2
24 )
400
24 (FBS) / 17.5 (FBSR)
IEC
UL / CUL
400
300
21 / 4
20
4
24 - 12
16 / 4 (disconnect level)
solid
stranded
0.2 - 4
0.2 - 1.5
0.2 - 4
0.2 - 1.5
Ordering data
Description
Color
Terminal block
gray
Type
UTI 2,5-L/LB
①
gray
D-UTI/3
CSA
-
Ex
-
-
Ferrule
without/with plastic sleeve
0.25 - 2.5
0.25 - 2.5
0.25 - 0.75
-
Ordering data
Order No.
3076033
Pcs. /
Pkt.
50
Type
UTI 2,5-PE/L/NTB
Accessories1)
Cover, width 2.2 mm
Height
51.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 4
26-12
PHOENIX CONTACT
Order No.
①
3076032
Pcs. /
Pkt.
50
3076036
50
Accessories1)
3076036
50
D-UTI/3
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
38
Terminal blocks - CLIPLINE complete
2.5 mm2 UT... screw connection terminal blocks
Mini feed-through terminal blocks and
ground terminals
①
Notes:
1)
②
For additional accessories and technical data, see page 30.
For information on installation and using accessories for Ex
applications, see page 602.
32 A, feed-through terminal block and ground
terminal

Ex:  
SEV13ATEX0178U / IECEx SEV13.0012U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Cross section range
Connection capacity
1 conductor
2 conductors (of the same type)
[A]
[V]
[A] / [mm²]
AWG
[mm²]
[mm²]
Width
Length
5.2
29.9
Imax. [A] Umax. [V] 32
500
24 (FBS) / 17.5 (FBSR) IEC
UL / CUL
500
300
24 / 2.5
20 / 24 - 12
solid
stranded
0.2 - 4
0.2 - 1.5
0.2 - 4
0.2 - 1.5
Height
34 (NS 15)
max. Ø [mm²]
0.2 - 4
AWG (UL)
24-12
CSA
600
20 / -
Ex
352
20.5 / 4
Ferrule
without/with plastic sleeve
0.25 - 2.5
0.25 - 2.5
0.25 - 1.5
-
Ordering data
Description
Terminal block
Ground terminal
Color
Order No.
①
①
②
3248030
3248031
3248032
Pcs. /
Pkt.
50
50
50
3248033
50
Type
gray
blue
green-yellow
MUT 2,5
MUT 2,5 BU
MUT 2,5-PE
gray
D-MUT 2,5/4
Accessories1)
Cover, width 2.2 mm
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
39
Terminal blocks - CLIPLINE complete
4 mm2 UT... screw connection terminal blocks
General technical data for 4 mm2 UT... screw connection terminal blocks
Rated data
Rated cross section
Cross section range
Connection capacity
[mm²]
AWG
IEC 60947-7-1 / IEC 60947-7-2 / IEC 60947-7-3
4
26 - 10
solid
stranded
Ferrule
without/with plastic sleeve
0.14 - 6
0.14 - 6
0.14 - 4
0.14 - 4
0.14 - 1.5
0.14 - 1.5
0.14 - 1.5
0.5 - 2.5
1 conductor
[mm²]
2 conductors (of the same type)
[mm²]
2 stranded conductors with a TWIN ferrule
[mm²]
General data
Stripping length
[mm]
9
Screw thread
M3
Tightening torque
[Nm]
0.6 - 0.8
Insulating material
PA
Inflammability class according to UL 94
V0
Note: additional or deviating data is documented for the product.
Notes:
In addition to the product, the internal electrical wiring is provided
as a circuit diagram. Free connection points for bridging are
indicated by a black dot.
The specified technical data and approvals refer to the first product
in each column. For information on the products below, please
refer to phoenixcontact.net/products
1) The bridge current is documented for the respective product. For
additional colors, see page 340.
System accessories for 4 mm2 UT... screw connection terminal blocks
Number of
positions
2
3
4
5
10
20
Description
① Jumper1)
③ Modular test plug
④ Spacer plate
⑤ Test plug metal part
⑥ Insulating sleeve, for MPS metal part
⑦ Test adapter, 4 mm socket hole
Screwdriver
Color
Type
Order No.
red
red
red
red
red
red
red
red
silver
red
gray
FBS 2-6
FBS 3-6
FBS 4-6
FBS 5-6
FBS 10-6
FBS 20-6
PS-6
DP PS-6
MPS-MT
MPS-IH RD
PAI-4-N GY
SF-SL 0,6X3,5-100 S-VDE
3030336
3030242
3030255
3030349
3030271
3030365
3030996
3036738
0201744
0201676
3032871
1212587
Pcs. /
Pkt.
50
50
50
50
10
10
10
10
10
10
10
10
Type
Order No.
FBSR 2-6
FBSR 3-6
FBSR 4-6
FBSR 5-6
FBSR 10-6
3033715
3001594
3001595
3001596
3033716
⑭ Reducing bridge
⑮ Vertical potential bridge
⑯ Fuse and function plugs for disconnect terminal blocks
For RB ..., see page 344.
For FBS-PV ..., see page 341.
For P-FU ... / P-DI / P-FIX / P-CO ..., see page 349 onwards.
⑰ Partition plates/end cover segments
For ATP-... / DS-..., visit phoenixcontact.net/products
⑱ Cover
⑳ Warning labels
 Lateral groove marking
 DIN rails and end brackets
For full accessories, visit phoenixcontact.net/products
Documented for the product.
For WS ..., see page 353.
UC-TM 6, UCT-TM 6 or ZB 6. See also Catalog 5, selection tables from page 100.
See Catalog 5.
Note: additional or deviating accessories are documented for the product.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
40
PHOENIX CONTACT
Pcs. /
Pkt.
50
50
50
50
10
Terminal blocks - CLIPLINE complete
4 mm2 UT... screw connection terminal blocks
Feed-through, multi-conductor, and
multi-level terminal blocks and
ground terminals
Notes:
1)
①
①
②
②
For additional accessories and technical data, see page 40.
For information on installation and using accessories for Ex
applications, see page 602.
41 A, feed-through terminal block and ground
terminal
41 A, feed-through terminal block and ground
terminal, 3 connections

Ex:   EAC Ex 

Ex:   EAC Ex 
KEMA 04ATEX2048 U / IECEx KEM 06.0027U
KEMA 06ATEX0017 U / IECEx KEM 06.0013U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
6.2
47.7
Imax. [A] Umax. [V] 41
1000
32 (FBS) / 24 (FBSR) IEC
UL / CUL
1000
600
32 / 4
30 / -
Technical data1)
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
600
30 / -
Ex
690
30 / 4
Width
Length
6.2
57.8
Imax. [A] Umax. [V] 41
500
32 (FBS) / 24 (FBSR)
IEC
UL / CUL
500
150
32 / 4
30 / -
Ordering data
Description
Color
Terminal block
gray
blue
green-yellow
Ground terminal
Type
UT 4
UT 4 BU
UT 4-PE
①
①
②
gray
Feed-through, multi-conductor, and
multi-level terminal blocks and
ground terminals
D-UT 2,5/10
Order No.
3044102
3044115
3044128
Ex
352
29 / 4
Order No.
①
①
②
3044364
3044500
3044380
Pcs. /
Pkt.
50
50
50
3047141
50
Type
UT 4-TWIN
UT 4-TWIN BU
UT 4-TWIN-PE
Accessories1)
3047028
50
①
D-UT 2,5/4-TWIN
①
②
Notes:
1)
CSA
150
30 / -
Ordering data
Pcs. /
Pkt.
50
50
50
Accessories1)
Cover, width 2.2 mm
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
For additional accessories and technical data, see page 40.
For information on installation and using accessories for Ex
applications, see page 602.
39 A, 1000 V, feed-through terminal block,
3 connections

Ex:  
39 A, feed-through terminal block and ground
terminal, 4 connections

Ex:   EAC Ex 
SEV13ATEX0133U / IECEx SEV13.0004U
KEMA 06ATEX0017 U / IECEx KEM 06.0013U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
6.2
57.8
Imax. [A] Umax. [V] 39
1000
32 (FBS) / 24 (FBSR) IEC
UL / CUL
1000
600
32 / 4
30 / -
Technical data1)
Height
50 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
600
30
Ex
550
27 / 4
Width
Length
6.2
65.4
Imax. [A] Umax. [V] 39
500
32 (FBS) / 24 (FBSR)
IEC
UL / CUL
500
150
32 / 4
30 / -
Ordering data
Description
Terminal block
Ground terminal
Color
gray
blue
green-yellow
Type
UT 4-TWIN HV
①
gray
D-UT 4-TWIN HV
CSA
150
30 / -
Ex
352
29 / 4
Ordering data
Order No.
3000608
Pcs. /
Pkt.
50
Order No.
①
①
②
3044571
3044584
3044597
Pcs. /
Pkt.
50
50
50
3047170
50
Type
UT 4-QUATTRO
UT 4-QUATTRO BU
UT 4-QUATTRO-PE
Accessories1)
Cover, width 2.2 mm
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
Accessories1)
3000710
50
D-UT 2,5/4-QUATTRO
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
41
Terminal blocks - CLIPLINE complete
4 mm2 UT... screw connection terminal blocks
Feed-through, multi-conductor, and
multi-level terminal blocks and
ground terminals
①
①
②
Notes:
1)
For additional accessories and technical data, see page 40.
For information on installation and using accessories for Ex
applications, see page 602.
③
37 A, 1000 V, feed-through terminal block,
4 connections

Ex:  
36 A, double-level terminal block and ground
terminal

Ex:   EAC Ex 
SEV13ATEX0133U / IECEx SEV13.0004U
KEMA 06ATEX0017 U / IECEx KEM 06.0013U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
6.2
65.4
Imax. [A] Umax. [V] 37
1000
32 (FBS) / 24 (FBSR) IEC
UL / CUL
1000
32 / 4
-
Technical data1)
Height
50 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
CSA
-
Ex
550
27 / 4
Width
Length
6.2
69.9
Imax. [A] Umax. [V] 36
800
30 (FBS) / 24 (FBSR)
IEC
UL / CUL
800
600
30 / 4
30 / -
Ordering data
Description
Color
Terminal block
gray
gray
gray
green-yellow
With potential distribution
Ground terminal
gray
gray
Type
Order No.
UT 4-QUATTRO HV
UT 4-QUATTRO HV BU
①
①
3048823
3048836
Feed-through, multi-conductor, and
multi-level terminal blocks and
ground terminals
D-UT 4-QUATTRO HV
Ex
440
25.5 / 4
Order No.
①
①
②
③
3044814
3044791
3044733
3044759
Pcs. /
Pkt.
50
50
50
50
3047293
3047303
50
50
Type
UTTB
UTTB
UTTB
UTTB
4
4 BU
4-PV
4-PE
Accessories1)
3048852
50
①
D-UTTB 2,5/4
DP-UTTB 2,5/4
①
②
Notes:
1)
CSA
600
30 / -
Ordering data
Pcs. /
Pkt.
50
50
Accessories1)
Cover, width 2.2 mm
Spacer plate
Height
65 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
For additional accessories and technical data, see page 40.
③
36 A, 1000 V, double-level terminal block,
2 connections top level

36 A, multi-level terminal block with PE foot

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
6.2
75.6
Imax. [A] Umax. [V] 36
1000
30 (FBS) / 24 (FBSR) IEC
UL / CUL
1000
600
30 / 4
30 / -
Technical data1)
Height
65 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
-
Ex
-
Width
Length
6.2
92.7
Imax. [A] Umax. [V] 36
500
32 (FBS) / 24 (FBSR)
IEC
UL / CUL
500
300
30 / 4
16
Ordering data
Description
Color
Terminal block
gray
gray
gray
gray
Type
Order No.
UTTB 4 HV
①
3000610
D-UTTB 4 HV
CSA
-
Type
UT 4-PE/L/L
UT 4-PE/L/N
UT 4-L/L
UT 4-L
PHOENIX CONTACT
Order No.
①
①
②
③
3214360
3214361
3214362
3214363
Accessories1)
3000709
50
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
42
Ex
-
Ordering data
Pcs. /
Pkt.
50
Accessories1)
Cover, width 2.2 mm
Height
61.7 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
Pcs. /
Pkt.
50
50
50
50
Terminal blocks - CLIPLINE complete
4 mm2 UT... screw connection terminal blocks
Fuse terminal blocks and lever-type
disconnect terminal blocks of the
same shape
Notes:
1)
①
①
②
②
For additional accessories and technical data, see page 40.
2)
If the fuse is faulty, the downstream circuit is not off load.
3)
For max. power dissipation, see page 616.
4) The current is determined by the fuse used, the voltage by the
light indicator.
For lever marking, please use marking material with a 5.2 mm
pitch.
10 A, lever-type fuse terminal block for
5 x 20 mm cartridge fuses
6.3 A, lever-type fuse terminal block for
5 x 20 mm cartridge fuses, with PE foot


Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
6.2
57.8
Imax. [A] Umax. [V] 103)
5004)
32 (FBS) / 24 (FBSR) IEC
UL / CUL
5004)
600
6.3 / 1
6.3 / -
Technical data1)
Height
73 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
600
6.3 / -
Ex
-
Width
Length
6.2
70.8
Imax. [A] Umax. [V] 6.33)
5004)
32 (FBS) / 24 (FBSR)
IEC
UL / CUL
5004)
600
6.3 / 1
10
Ordering data
CSA
600
10 / -
Ex
-
Ordering data
Description
Color
Type
Terminal block
with LED display for 12 – 30 V AC/DC2)
black
black
UT 4-HESI (5X20)
UT 4-HESILED 24 (5X20)
①
②
3046032
3046090
Pcs. /
Pkt.
50
50
for 12 ... 60 V AC/DC 2)
for 30 – 60 V AC/DC2)
for 110 – 250 V AC/DC2)
black
black
black
UT 4-HESILED 24 (5X20) 120KOHM ②
UT 4-HESILED 60 (5X20)
②
UT 4-HESILA 250 (5X20)
②
3248005
3046126
3046100
50
50
50
Fuse terminal blocks and lever-type
disconnect terminal blocks of the
same shape
– The lever-type disconnect terminal blocks
are the same shape as the respective
lever-type fuse terminal blocks
Height
73 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
Order No.
①
Order No.
UT 4-PE/HESI (5X20)
UT 4-PE/HESI LED 24 (5X20)
①
②
3073995
3070053
Pcs. /
Pkt.
50
50
UT 4-PE/HESILED 60 (5X20)
UT 4-PE/HESI LA 250 (5X20)
②
②
3070066
3070079
50
50
Type
①
Notes:
1)
For additional accessories and technical data, see page 40.
For lever marking, please use marking material with a 5.2 mm
pitch.
20 A, lever-type disconnect terminal block,
same shape

20 A, lever-type disconnect terminal block,
same shape, with PE foot

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
6.2
57.8
Imax. [A] Umax. [V] 20
500
32 (FBS) / 24 (FBSR) IEC
UL / CUL
500
600
20 / 2.5
16 / -
Technical data1)
Height
73 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
600
16 / -
Ex
-
Width
Length
6.2
70.8
Imax. [A] Umax. [V] 20
500
32 (FBS) / 24 (FBSR)
IEC
UL / CUL
500
600
20 / 2.5
16
Ordering data
Terminal block
black/orange
UT 4-HEDI
①
3046249
With test socket screws
black/orange
UT 4-HEDI-P/P
①
3046252
50
Color
Type
CSA
600
16 / -
Ex
-
Ordering data
Pcs. /
Pkt.
50
Description
Height
73 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
Order No.
Type
UT 4-PE/HEDI
Order No.
①
3074004
Pcs. /
Pkt.
50
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
43
Terminal blocks - CLIPLINE complete
4 mm2 UT... screw connection terminal blocks
Fuse terminal blocks and lever-type
disconnect terminal blocks of the
same shape
①
①
②
Notes:
1)
For additional accessories and technical data, see page 40.
2)
If the fuse is faulty, the downstream circuit is not off load.
3)
For max. power dissipation, see page 616.
4)
The current is determined by the fuse used.
③
For lever marking, please use marking material with a 5.2 mm
pitch.
36 A, multi-level terminal block, safety lever
36 A, multi-level terminal block, safety lever
with LED display, PE foot
For information on installation and using accessories for Ex
applications, see page 602.

Ex: 

Ex: 
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Nominal current / cross section
[A]
[V]
[A] / [mm²]
[A] / [mm²]
Width
Length
6.2
92.7
Imax. [A] Umax. [V] 363)
5003)
32 (FBS) / 24 (FBSR) IEC
UL / CUL
5003)
300
28 / 4
16
6.34) / 1 (disconnect level)
Technical data1)
Height
88.9 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
-
Ex
-
Width
Length
6.2
92.7
Imax. [A] Umax. [V] 363)
5003)
32 (FBS) / 24 (FBSR)
IEC
UL / CUL
5003)
300
28 / 4
16
6.34) / 1 (disconnect level)
Ordering data
Color
Type
Order No.
Fuse terminal block
black
black
black
black
black
UT 4-L/HESI (5X20)
①
3214325
Fuse terminal blocks and lever-type
disconnect terminal blocks of the
same shape
CSA
-
Ex
-
Ordering data
Description
With light indicator for 12 - 30 V DC2)
for 30 – 60 V AC/DC2)
for 110 – 250 V AC/DC2)
Height
88.9 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
Pcs. /
Pkt.
50
UT 4-PE/L/HESI (5X20)
UT 4-PE/L/HESILED 24 (5X20)
UT 4-PE/L/HESILED 60 (5X20)
UT 4-PE/L/HESILED 250 (5X20)
①
Order No.
Pcs. /
Pkt.
①
②
②
③
3214320
3214321
3214322
3214323
50
50
50
50
Type
①
②
Notes:
1)
For additional accessories and technical data, see page 40.
2)
Current and voltage are determined by the plug used.
For lever marking, please use marking material with a 5.2 mm
pitch.
36 A, multi-level lever-type disconnect
terminal block, PE foot, same shape

36 A, multi-level terminal block with
disconnect zone, PE foot

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Nominal current / cross section
[A]
[V]
[A] / [mm²]
[A] / [mm²]
Width
Length
6.2
92.7
Imax. [A] Umax. [V] 36
500
32 (FBS) / 24 (FBSR) IEC
UL / CUL
500
300
28 / 4
16
20 / 1 (disconnect level)
Technical data1)
Height
88.9 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
-
Ex
-
Width
Length
6.2
92.7
Imax. [A] Umax. [V] 36
500
32 (FBS) / 24 (FBSR)
IEC
UL / CUL
500
28 / 4
2
20 ) / 2.5 (disconnect level)
Ordering data
CSA
-
Color
Type
Order No.
Terminal block
black
gray
gray
UT 4-PE/L/HEDI
①
3214324
Pcs. /
Pkt.
50
Type
UT 4-PE/L/TG
UT 4-PE/L/MT
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
44
PHOENIX CONTACT
Ex
-
Ordering data
Description
Knife disconnect terminal block
Height
61.7 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
-
Order No.
Pcs. /
Pkt.
①
②
3214365
3214364
50
50
Terminal blocks - CLIPLINE complete
4 mm2 UT... screw connection terminal blocks
Disconnect and knife disconnect
terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 40.
2)
If the fuse is faulty, the downstream circuit is not off load.
3)
Current and voltage are determined by the plug used.
Detailed information and data sheets regarding terminal blocks in
the Ex area are available in the product area on our website at
www.phoenixcontact.net/products and in IECEx Certificate of
Conformity IECEx UL 13.0007U and in UL file E192998.
Only the fuse plugs listed may be used.
For information on installation and using accessories for Ex
applications, see page 602.
20 A, disconnect terminal block
20 A, disconnect terminal block, for Ex nA

Ex:    
IECEx UL 13.0007U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
6.2
57.8
Imax. [A] Umax. [V] 3
5003)
20 )
20 (FBS) / 20 (FBSR) IEC
UL / CUL
5003)
600
3
20 ) / 2.5
16 / -
Technical data1)
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
600
16 / -
Ex
-
Width
6.2
Imax. [A] 203)
20 (FBS)
IEC
5003)
203) / 2.5
Ordering data
Description
Color
Terminal block
gray
blue
gray
blue
With test socket screws
Type
UT 4-TG
UT 4-TG BU
UT 4-TG-P/P
UT 4-TG-P/P BU
Order No.
①
3046142
3073283
3046168
3073296
Pcs. /
Pkt.
50
50
50
50
black
black
black
black
UL / CUL
-
CSA
-
Ex
250
6.3 / 4
Order No.
UT 4-TG-EX
①
3046143
Pcs. /
Pkt.
50
UT 4-TG-P/P-EX
①
3046169
50
3036807
3036821
3036823
3036836
10
10
10
10
Type
Accessories1)
Fuse plug, width 6.2 mm2)
With light indicator for 12 - 30 V DC
for 30 – 60 V AC/DC
for 110 – 250 V AC/DC
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
-
Ordering data
①
Length
57.8
Umax. [V] 5003)
Accessories1)
P-FU 5X20-EX
P-FU 5X20 LED 24-EX
P-FU 5X20 LED 60-EX
P-FU 5X20 LA 250-EX
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
45
Terminal blocks - CLIPLINE complete
4 mm2 UT... screw connection terminal blocks
Disconnect and knife disconnect
terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 40.
2)
Current and voltage are determined by the plug used.
20 A, disconnect terminal block,
3 connections
20 A, disconnect terminal block,
4 connections


Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
6.2
65.4
Imax. [A] Umax. [V] 20
5002)
20 (FBS) / 20 (FBSR) IEC
UL / CUL
5002)
300
20 / 202) / 2.5
Technical data1)
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
300
16 / -
Ex
-
Width
Length
6.2
65.4
Imax. [A] Umax. [V] 20
5002)
20 (FBS) / 20 (FBSR)
IEC
UL / CUL
5002)
300
202) / 2.5
20 / -
Ordering data
Description
Color
Terminal block
gray
blue
gray
blue
With test socket screws
gray
Type
Order No.
UT 4-TWIN-TG
UT 4-TWIN-TG BU
UT 4-TWIN-TG P/P
UT 4-TWIN-TG P/P BU
①
①
①
①
3046595
3073034
3046605
3073047
Disconnect and knife disconnect
terminal blocks
D-UT 2,5/4-QUATTRO
CSA
300
16 / -
Ex
-
Ordering data
Pcs. /
Pkt.
50
50
50
50
Order No.
①
①
①
①
3064027
3073076
3064030
3073089
Pcs. /
Pkt.
50
50
50
50
3047170
50
Type
UT 4-QUATTRO-TG
UT 4-QUATTRO-TG BU
UT 4-QUATTRO-TG P/P
UT 4-QUATTRO-TG P/P BU
Accessories1)
Cover, width 2.2 mm
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
Accessories1)
3047170
50
①
D-UT 2,5/4-QUATTRO
①
Notes:
1)
For additional accessories and technical data, see page 40.
2)
Current and voltage are determined by the plug used.
3)
Lower level
20 A, disconnect terminal block with PE foot

38 A, double-level terminal block with
disconnect zone

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Nominal current / cross section
[A]
[V]
[A] / [mm²]
[A] / [mm²]
Width
Length
6.2
70.8
Imax. [A] Umax. [V] 20
500
32 (FBS) / 24 (FBSR) IEC
UL / CUL
500
20 / 2.5
-
Technical data1)
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
CSA
600
16 / -
Ex
-
Width
Length
6.2
69.9
Imax. [A] Umax. [V] 3
38 )
5002)
32 (FBS) / 24 (FBSR)
IEC
UL / CUL
5002)
600
30 / 4
16
202) / 2.5 (disconnect level)
Ordering data
Description
Color
Terminal block
With test socket screws
Disconnect terminal block
gray
gray
gray
gray
gray
CSA
600
5
Type
Order No.
UT 4-PE/TG
UT 4-PE/TG P/P
①
①
3070024
3070037
Type
UTTB 4-TG
PHOENIX CONTACT
Order No.
Pcs. /
Pkt.
①
3044720
50
3047293
3047303
50
50
Accessories1)
D-UTTB 2,5/4
DP-UTTB 2,5/4
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
46
Ex
-
Ordering data
Pcs. /
Pkt.
50
50
Accessories1)
Cover, width 2.2 mm
Spacer plate
Height
65 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
Terminal blocks - CLIPLINE complete
4 mm2 UT... screw connection terminal blocks
Disconnect and knife disconnect
terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 40.
2)
Current and voltage are determined by the plug used.
36 A, multi-level terminal block with
disconnect zone, PE foot
20 A, knife disconnect terminal block


Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Nominal current / cross section
[A]
[V]
[A] / [mm²]
[A] / [mm²]
Width
Length
6.2
92.7
Imax. [A] Umax. [V] 36
500
32 (FBS) / 24 (FBSR) IEC
UL / CUL
500
28 / 4
202) / 2.5 (disconnect level)
Technical data1)
Height
61.7 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
CSA
-
Ex
-
Width
Length
6.2
57.8
Imax. [A] Umax. [V] 20
500
20 (FBS) / 20 (FBSR)
IEC
UL / CUL
500
600
20 / 2.5
16 / -
Ordering data
Description
Color
Terminal block
gray
gray
blue
gray
blue
With test socket screws
Disconnect and knife disconnect
terminal blocks
Type
UT 4-PE/L/TG
①
Height
49.1 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
600
16 / -
Ex
-
Ordering data
Order No.
3214365
Pcs. /
Pkt.
50
UT 4-MT
UT 4-MT BU
UT 4-MT-P/P
UT 4-MT-P/P BU
①
Order No.
Pcs. /
Pkt.
①
①
①
①
3046139
3046278
3046171
3046265
50
50
50
50
Type
①
Notes:
1)
For additional accessories and technical data, see page 40.
Detailed information and data sheets regarding terminal blocks in
the Ex area are available in the product area on our website at
www.phoenixcontact.net/products and in IECEx Certificate of
Conformity IECEx UL 13.0007U and in UL file E192998.
For information on installation and using accessories for Ex
applications, see page 602.
20 A, knife disconnect terminal block for Ex nA
20 A, knife disconnect terminal block with PE
foot
Ex:    
IECEx UL 13.0007U

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Connection capacity
2 conductors (of the same type)
[A]
[V]
[A] / [mm²]
[mm²]
Technical data1)
Width
6.2
Imax. [A] 20
20 (FBS) IEC
500
20 / 2.5
solid
Length
57.8
Umax. [V] 500
Height
49.1 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
-
UL / CUL
stranded
CSA
-
0.14 - 1.5
0.14 - 1.5
Ex
500
16 / 4
Ferrule
without/with plastic sleeve
0.14 - 1.5
-
Width
Length
6.2
70.8
Imax. [A] Umax. [V] 20
500
32 (FBS) / 24 (FBSR)
IEC
UL / CUL
500
20 / 2.5
solid
stranded
0.14 - 1.5
Ordering data
Description
Terminal block
With test socket screws
Color
gray
gray
Type
UT 4-MT-EX
UT 4-MT-P/P-EX
①
①
0.14 - 1.5
Height
49.1 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
600
16 / -
Ex
Ferrule
without/with plastic sleeve
0.25 - 1.5
-
Ordering data
Order No.
3046141
3046173
Pcs. /
Pkt.
50
50
Type
UT 4-PE/MT
UT 4-PE/MT P/P
Order No.
①
①
3070011
3046140
Pcs. /
Pkt.
50
50
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
47
Terminal blocks - CLIPLINE complete
4 mm2 UT... screw connection terminal blocks
Disconnect and knife disconnect
terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 40.
20 A, knife disconnect terminal block,
3 connections
20 A, knife disconnect terminal block,
4 connections


Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
6.2
65.4
Imax. [A] Umax. [V] 20
500
20 (FBS) / 20 (FBSR) IEC
UL / CUL
500
300
20 / 2.5
20 / -
Technical data1)
Height
49.1 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
300
16 / -
Ex
-
Width
Length
6.2
65.4
Imax. [A] Umax. [V] 20
500
20 (FBS) / 20 (FBSR)
IEC
UL / CUL
500
300
20 / 2.5
20 / -
Ordering data
Description
Color
Terminal block
gray
blue
gray
blue
With test socket screws
gray
Type
Order No.
UT 4-TWIN-MT
UT 4-TWIN-MT BU
UT 4-TWIN-MT P/P
UT 4-TWIN-MT P/P BU
①
①
①
①
3046003
3073018
3064014
3073021
Disconnect and knife disconnect
terminal blocks
D-UT 2,5/4-QUATTRO
CSA
300
16 / -
Ex
-
Ordering data
Pcs. /
Pkt.
50
50
50
50
Order No.
①
①
①
①
3064043
3073050
3064056
3073063
Pcs. /
Pkt.
50
50
50
50
3047170
50
Type
UT 4-QUATTRO-MT
UT 4-QUATTRO-MT BU
UT 4-QUATTRO-MT P/P
UT 4-QUATTRO-MT P/P BU
Accessories1)
Cover, width 2.2 mm
Height
49.1 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
Accessories1)
3047170
50
①
D-UT 2,5/4-QUATTRO
①
Notes:
1)
For additional accessories and technical data, see page 40.
2)
Lower level
②
38 A, double-level terminal block with knife
disconnect zone

36 A, multi-level terminal block with knife
disconnect zone, PE foot

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Nominal current / cross section
[A]
[V]
[A] / [mm²]
[A] / [mm²]
Width
Length
6.2
69.9
Imax. [A] Umax. [V] 2
38 )
500
36 (FBS) / 24 (FBSR) IEC
UL / CUL
500
600
30 / 4
16
20 / 2.5 (disconnect level)
Technical data1)
Height
65 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
600
5
Ex
-
Width
Length
6.2
92.7
Imax. [A] Umax. [V] 2
36 )
500
32 (FBS) / 24 (FBSR)
IEC
UL / CUL
500
300
28 / 4
16
20 / 2.5 (disconnect level)
Ordering data
Description
Color
Knife disconnect terminal block
With test socket screws
for 12 – 30 V DC, 0.7 – 2.4 mA
gray
gray
gray
gray
Type
Order No.
UTTB 4-MT
UTTB 4-MT P/P
UTTB 4-MT P/P LA 24 RD/O-U
①
①
②
3044775
3044762
3046773
D-UTTB 2,5/4
CSA
-
Type
UT 4-PE/L/MT
PHOENIX CONTACT
Order No.
①
3214364
Accessories1)
3047293
50
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
48
Ex
-
Ordering data
Pcs. /
Pkt.
50
50
50
Accessories1)
Cover, width 2.2 mm
Height
61.7 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
Pcs. /
Pkt.
50
Terminal blocks - CLIPLINE complete
4 mm2 UT... screw connection terminal blocks
Test disconnect terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 40.
②
28 A, test disconnect terminal block
28 A, feed-through terminal block and ground
terminal, same shape


Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
6.2
66
Imax. [A] Umax. [V] 28
500
32 (FBS) / 24 (FBSR) IEC
UL / CUL
500
600
28 / 4
25 / -
Technical data1)
Height
47.7 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
600
25 / -
Ex
-
Width
Length
6.2
66
Imax. [A] Umax. [V] 32
500
32 (FBS) / 24 (FBSR)
IEC
UL / CUL
500
600
32 / 4
25 / -
Ordering data
Description
Color
Test disconnect terminal block
With test socket screws
Ground terminal
gray
gray
blue
green-yellow
Type
UTME 4
UTME 4-P/P
UTME 4-P/P BU
①
①
①
gray
D-UTME 4
CSA
600
25 / -
Ex
-
Ordering data
Order No.
3047452
3047453
3047454
Pcs. /
Pkt.
50
50
50
Order No.
UTMED 4
①
3047465
Pcs. /
Pkt.
50
UTMED 4-PE
②
3047478
50
3047491
10
Type
Accessories1)
Cover, width 2.2 mm
Height
47.7 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
Accessories1)
3047491
10
D-UTME 4
Supplementary accessories for UTME 4
test disconnect terminal blocks
Ordering data
Description
Test adapter, for 4 mm Ø safety test
plugs, latches into the bridge shaft
– Only two UTME 4 test disconnect
terminal blocks are required for a current
transformer measuring circuit
– Less space required compared to creating
circuits with slide-type terminal blocks
① FBS... jumper for cross connection
② 4 mm Ø PAI-4-FIX... test plug adapter
③ S-ME 4 switching lock
④ SB-ME... switching jumper
⑤ C-ME 4/2 connection bridge
No. of
pos.
1
orange
PAI-4-FIX-5/6 OG
3035974
Pcs. /
Pkt.
10
2
3
4
2
yellow
green
violet
black
blue
red
gray
brown
white
gray/orange
gray/orange
gray/orange
orange
PAI-4-FIX-5/6 YE
PAI-4-FIX-5/6 GN
PAI-4-FIX-5/6 VT
PAI-4-FIX-5/6 BK
PAI-4-FIX-5/6 BU
PAI-4-FIX-5/6 RD
PAI-4-FIX-5/6 GY
PAI-4-FIX-5/6 BN
S-ME 4
SB-ME 2-6
SB-ME 3-6
SB-ME 4-6
C-ME 4/2
3035977
3035978
3035979
3035980
3035975
3035976
3035982
3035981
3035758
3035755
3035756
3035757
3035759
10
10
10
10
10
10
10
10
10
10
10
10
10
3
orange
C-ME 4/3
3035760
10
1
1
1
1
1
1
1
1
Switching lock, plug-in
Switching jumper, plug-in
Operating lever, for actuating 2 test
disconnect terminal blocks
Color
Type
Order No.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
49
Terminal blocks - CLIPLINE complete
4 mm2 UT... screw connection terminal blocks
Diode terminal blocks
①
①
②
②
Notes:
1)
For additional accessories and technical data, see page 40.
For information on installation and using accessories for Ex
applications, see page 602.
③
41 A, feed-through terminal block and ground
terminal, same shape

Ex:   EAC Ex 
0.5 A, diode terminal block, 1N 4007
(1300 V/0.5 A)

KEMA 04ATEX2048 U / IECEx KEM 06.0027U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
6.2
57.8
Imax. [A] Umax. [V] 41
800
32 (FBS) / 24 (FBSR) IEC
UL / CUL
800
600
32 / 4
30 / -
Technical data1)
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
600
30 / -
Ex
690
29 / 4
Width
Length
6.2
57.8
Imax. [A] Umax. [V] 0.5
800
32 (FBS) / 24 (FBSR)
IEC
UL / CUL
800
600
0.5 / 1
0.5 / -
Ordering data
Description
Color
Terminal block
Ground terminal, with snap-on foot
With screw foot
Terminal block, for conducting direction see circuit diagram
gray
blue
green-yellow
green-yellow
gray
gray
gray
Diode terminal blocks
CSA
600
1/-
Type
Order No.
UT 4-MTD
UT 4-MTD BU
UT 4-MTD-PE
UT 4-MTD-PE/S
①
①
②
③
3046184
3046197
3046223
3046207
Order No.
Pcs. /
Pkt.
①
②
3046210
3046236
50
50
3047141
50
Type
UT 4-MTD-DIO/L-R
UT 4-MTD-DIO/R-L
D-UT 2,5/4-TWIN
Ex
-
Ordering data
Pcs. /
Pkt.
50
50
50
50
Accessories1)
Cover, width 2.2 mm
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
Accessories1)
3047141
50
①
D-UT 2,5/4-TWIN
①
Notes:
1)
For additional accessories and technical data, see page 40.
0.5 A, diode terminal block, 1N 4007 (1300 V/
0.5 A), conducting direction: from left to right

0.5 A, diode terminal block, 1N 4007 (1300 V/
0.5 A), conducting direction: from right to left

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
6.2
70.8
Imax. [A] Umax. [V] 0.5
500
32 (FBS) / 24 (FBSR) IEC
UL / CUL
500
600
0.5 / 1
0.5
Technical data1)
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
-
Ex
-
Width
Length
6.2
70.8
Imax. [A] Umax. [V] 0.5
500
32 (FBS) / 24 (FBSR)
IEC
UL / CUL
500
600
0.5 / 1
0.5
Ordering data
Description
Color
Terminal block, for conducting direction see circuit diagram
gray
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
26-10
CSA
-
Ordering data
Type
Order No.
UT 4-PE/L-DIO/L-R P/P
①
3046834
Pcs. /
Pkt.
50
Type
UT 4-PE/L-DIO/R-L P/P
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
50
PHOENIX CONTACT
Ex
-
Order No.
①
3046235
Pcs. /
Pkt.
50
Terminal blocks - CLIPLINE complete
4 mm2 UT... screw connection terminal blocks
Installation terminal blocks
①
Notes:
1)
For additional accessories and technical data, see page 40.
Assembly instruction:
In order to securely fix the neutral busbar in place, support
brackets must be placed at the beginning and end of each terminal
strip as well as every 20 cm on longer terminal strips.
The corresponding support brackets can be found at
phoenixcontact.net/products
32 A, neutral disconnect terminal block

Technical data1)
Dimensions
[mm]
Max. electrical data
[A]
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Connection capacity
[V]
[A] / [mm²]
1 conductor
[mm²]
Width
Length
6.2
55
Imax. [A] Umax. [V] 32
250
32 (FBS) / 24 (FBSR) IEC
UL / CUL
250
32 / 4
solid
stranded
0.14 - 6
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.14 - 6
CSA
-
Ex
Ferrule
without/with plastic sleeve
0.25 - 4
0.25 - 4
0.14 - 6
Ordering data
Description
Color
Neutral disconnect terminal block
blue
Type
①
UTN 4
3245024
Pcs. /
Pkt.
50
3245079
3245082
50
50
Order No.
Accessories1)
Cover, width 2.2 mm
Support bracket
blue
blue
Mini feed-through terminal blocks and
ground terminals
D-UTN 2,5/10
AB-UTN 2,5/10
①
Notes:
1)
②
For additional accessories and technical data, see page 40.
For information on installation and using accessories for Ex
applications, see page 602.
41 A, feed-through terminal block and ground
terminal

Ex:  
SEV13ATEX0178U / IECEx SEV13.0012U
Technical data1)
Dimensions
[mm]
Max. electrical data
[A]
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Cross section range
Connection capacity
[V]
[A] / [mm²]
AWG
1 conductor
2 conductors (of the same type)
[mm²]
[mm²]
Width
Length
6.2
29.9
Imax. [A] Umax. [V] 41
500
32 (FBS) / 24 (FBSR) IEC
UL / CUL
500
300
32 / 4
30 / 24 - 10
solid
stranded
0.2 - 6
0.2 - 1.5
0.2 - 6
0.2 - 1.5
Height
34 (NS 15)
max. Ø [mm²]
0.2 - 6
AWG (UL)
24-10
CSA
600
30 / -
Ex
352
27.5 / 6
Ferrule
without/with plastic sleeve
0.25 - 4
0.25 - 4
0.25 - 1.5
-
Ordering data
Description
Terminal block
Ground terminal
Color
gray
blue
green-yellow
Type
MUT 4
MUT 4 BU
MUT 4-PE
①
①
②
Order No.
3248035
3248036
3248037
Pcs. /
Pkt.
50
50
50
Accessories1)
Cover, width 2.2 mm
Courtesy of Steven
gray
D-MUT
Engineering,
Inc.2,5/4
- (800)
3248033
50
258-9200 - sales@steveneng.com
- www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
51
Terminal blocks - CLIPLINE complete
6 mm2 UT... screw connection terminal blocks
General technical data for 6 mm2 UT... screw connection terminal blocks
Rated data
Rated cross section
Cross section range
Connection capacity
[mm²]
AWG
IEC 60947-7-1 / IEC 60947-7-2 / IEC 60947-7-3
6
24 - 8
solid
stranded
Ferrule
without/with plastic sleeve
0.2 - 10
0.2 - 10
0.25 - 6
0.25 - 6
0.2 - 2.5
0.2 - 2.5
0.25 - 1.5
0.5 - 4
1 conductor
[mm²]
2 conductors (of the same type)
[mm²]
2 stranded conductors with a TWIN ferrule
[mm²]
General data
Stripping length
[mm]
10
Screw thread
M4
Tightening torque
[Nm]
1.5 - 1.8
Insulating material
PA
Inflammability class according to UL 94
V0
Note: additional or deviating data is documented for the product.
Notes:
In addition to the product, the internal electrical wiring is provided
as a circuit diagram. Free connection points for bridging are
indicated by a black dot.
The specified technical data and approvals refer to the first product
in each column. For information on the products below, please
refer to phoenixcontact.net/products
1) The bridge current is documented for the respective product. For
additional colors, see page 340.
System accessories for 6 mm2 UT... screw connection terminal blocks
Number of
positions
2
3
4
5
10
16
Description
① Jumper1)
③ Modular test plug
④ Spacer plate
⑤ Test plug metal part
⑥ Insulating sleeve, for MPS metal part
⑦ Test adapter, 4 mm socket hole
Screwdriver
Color
Type
Order No.
red
red
red
red
red
red
red
red
silver
red
gray
FBS 2-8
FBS 3-8
FBS 4-8
FBS 5-8
FBS 10-8
3030284
3030297
3030307
3030310
3030323
Pcs. /
Pkt.
10
10
10
10
10
PS-8
DP PS-8
MPS-MT
MPS-IH RD
PAI-4-N GY
SZS 1,0X4,0 VDE
3031005
3036741
0201744
0201676
3032871
1205066
10
10
10
10
10
10
Type
Order No.
FBSR 2-8
FBSR 3-8
FBSR 4-8
FBSR 5-8
FBSR 10-8
FBSR 16-8
3033808
3001597
3000585
3033809
3001599
3033816
⑭ Reducing bridge
⑯ Fuse and function plugs for disconnect terminal blocks
For RB ..., see page 344.
For P-FU ... / P-DI / P-FIX / P-CO ..., see page 349 onwards.
⑰ Partition plates/end cover segments
For ATP-... / DS-..., visit phoenixcontact.net/products
⑱ Cover
⑳ Warning labels
 Lateral groove marking
 DIN rails and end brackets
For full accessories, visit phoenixcontact.net/products
Documented for the product.
For WS ..., see page 353.
UC-TM 8, UCT-TM 8 or ZB 8. See also Catalog 5, selection tables from page 100.
See Catalog 5.
Note: additional or deviating accessories are documented for the product.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
52
PHOENIX CONTACT
Pcs. /
Pkt.
10
10
10
10
10
10
Terminal blocks - CLIPLINE complete
6 mm2 UT... screw connection terminal blocks
Feed-through terminal blocks
①
Notes:
1)
For additional accessories and technical data, see page 52.
②
For information on installation and using accessories for Ex
applications, see page 602.
57 A, feed-through terminal block and ground
terminal

Ex:   EAC Ex 
KEMA 04ATEX2048 U / IECEx KEM 06.0027U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
8.2
47.7
Imax. [A] Umax. [V] 57
1000
41 (FBS) / 32 (FBSR) IEC
UL / CUL
1000
600
41 / 6
50 / -
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 10
24-8
CSA
600
50 / -
Ex
690
40 / 6
Ordering data
Description
Color
Terminal block
gray
blue
green-yellow
Ground terminal
Type
UT 6
UT 6 BU
UT 6-PE
①
①
②
3044131
3044144
3044157
Pcs. /
Pkt.
50
50
50
3047028
50
Order No.
Accessories1)
Cover, width 2.2 mm
gray
Fuse terminal blocks
D-UT 2,5/10
①
①
Notes:
1)
For additional accessories and technical data, see page 52.
2)
If the fuse is faulty, the downstream circuit is not off load.
3)
For max. power dissipation, see page 616.
4)
The current is determined by the fuse used, the voltage by the
light indicator.
As disconnect terminal block 500 V
For lever marking, please use marking material with 6.2 mm pitch.
10 A, lever-type fuse terminal block for
6.3 x 32 mm cartridge fuses

10 A, lever-type fuse terminal block for
6.3 x 32 mm cartridge fuses, with LED display

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
8.2
57.8
Imax. [A] Umax. [V] 3
10 )
6304)
41 (FBS) / 32 (FBSR) IEC
UL / CUL
6304)
600
4
10 ) / 1.5
10 / -
Technical data1)
Height
73 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 10
24-8
CSA
600
10 / -
Ex
-
Width
Length
8.2
57.8
Imax. [A] Umax. [V] 3
10 )
244)
41 (FBS) / 32 (FBSR)
IEC
UL / CUL
244)
600
4
10 ) / 1.5
10 / -
Ordering data
Description
Color
Type
Terminal block
With LED for 12 – 30 V AC/DC, 0.31 – 0.95 mA2)
black
black
UT 6-HESI (6,3X32)
①
for 30 – 60 V AC/DC, 0.40 – 0.86 mA2)
110 – 250 V AC/DC, 0.41 – 0.96 mA2)
black
black
Height
73 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 10
24-8
CSA
600
10 / -
Ex
-
Ordering data
Order No.
3046401
Pcs. /
Pkt.
50
Order No.
Pcs. /
Pkt.
UT 6-HESILED 24 (6,3X32)
①
3046414
50
UT 6-HESILED 60 (6,3X32)
UT 6-HESILA 250 (6,3X32)
①
①
3046427
3046430
50
50
Type
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
53
Terminal blocks - CLIPLINE complete
6 mm2 UT... screw connection terminal blocks
Disconnect terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 52.
2)
If the fuse is faulty, the downstream circuit is not off load.
3)
Current and voltage are determined by the plug used.
Detailed information and data sheets regarding terminal blocks in
the Ex area are available in the product area on our website at
www.phoenixcontact.net/products and in IECEx Certificate of
Conformity IECEx UL 13.0007U and in UL file E192998.
Only the fuse plugs listed may be used.
For information on installation and using accessories for Ex
applications, see page 602.
20 A, disconnect terminal block
20 A, disconnect terminal block for Ex nA


Ex:    
IECEx UL 13.0007U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
8.2
57.8
Imax. [A] Umax. [V] 3
5003)
20 )
20 (FBS) / 20 (FBSR) IEC
UL / CUL
5003)
600
3
20 ) / 2.5
20 / -
Technical data1)
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 10
24-8
CSA
600
16 / -
Ex
-
Width
Length
8.2
57.8
Imax. [A] Umax. [V] 3
20 )
5003)
20 (FBS) / 20 (FBSR)
IEC
UL / CUL
5003)
3
20 ) / 2.5
-
Ordering data
Description
Color
Terminal block
gray
blue
gray
blue
With test socket screws
Type
UT 6-TG
UT 6-TG BU
UT 6-TG P/P
UT 6-TG P/P BU
①
①
①
①
Accessories1)
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 10
CSA
-
Ex
250
6.3 / 6
Ordering data
Order No.
3046485
3073856
3073869
3073872
Pcs. /
Pkt.
50
50
50
50
Order No.
UT 6-TG-EX
①
3046486
Pcs. /
Pkt.
50
UT 6-TG P/P-EX
①
3073870
50
Type
Accessories1)
Fuse plug, width 8.2 mm2
With LED for 12 – 30 V DC, 0.35 – 0.95 mA
black
black
P-FU 6,3X32-EX
P-FU 6,3X32 LED 24-EX
3046499
3046509
10
10
for 30 – 60 V AC/DC, 0.36 – 0.95 mA
for 110 – 250 V AC/DC, 0.4 – 0.95 mA
black
black
P-FU 6,3X32 LED 60-EX
P-FU 6,3X32 LA 250-EX
3046512
3046525
10
10
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
54
PHOENIX CONTACT
Terminal blocks - CLIPLINE complete
6 mm2 UT... screw connection terminal blocks
Knife disconnect terminal blocks
①
Notes:
1)
For additional accessories and technical data, see page 52.
20 A, knife disconnect terminal block

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
8.2
57.8
Imax. [A] Umax. [V] 20
500
20 (FBS) / 20 (FBSR) IEC
UL / CUL
500
600
20 / 2.5
20 / -
Height
49.1 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 10
24-8
CSA
600
16 / -
Ex
-
Ordering data
Description
Terminal block
Color
gray
blue
gray
blue
Type
UT 6-MT
UT 6-MT BU
UT 6-MT P/P
UT 6-MT P/P BU
Order No.
①
①
①
①
3064069
3073267
3064072
3073270
Pcs. /
Pkt.
50
50
50
50
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
55
Terminal blocks - CLIPLINE complete
6 mm2 UT... screw connection terminal blocks
Test disconnect terminal blocks
Notes:
For further jumpers, see page 340.
For further test sockets, see page 505.
For corresponding AP-ME and AH-ME terminal strip covers, see
Catalog 5.
57 A, 1000 V, test disconnect terminal block,
2 jumper shafts

50 A, test disconnect terminal block, 4 jumper
shafts, 2 screw bridge shafts

Technical data
Dimensions
[mm]
Dimensions
[mm]
Max. electrical data
Rated data
Rated voltage
Nominal current / cross section
General data
Stripping length
Tightening torque
[V]
[A] / [mm²]
[mm]
[Nm]
Width
8.2
Width
8.2
Imax. [A] 57
IEC 60947-7-1
IEC
Length
72.6
Length
72.6
Umax. [V] 1000
1000
41 / 6
-
UL
Technical data
Height NS 35/7,5
54.3
Height NS 32
59.3
max. Ø [mm²] AWG (UL)
0.2 - 10
CSA
IEC/
EN 60079-7
-
12
1.2 - 1.4
Width
8.2
Width
8.2
Imax. [A] 50
IEC 60947-7-1
IEC
Length
105.2
Length
105.2
Umax. [V] 1000
1000
41 / 6
600
50
UL
12
1.5 - 1.8
Ordering data
No. of
pos.
Description
Color
Type
Imax
Terminal block
With test socket screws
Feed-through terminal block
gray
gray
gray
UT 6-T-HV
UT 6-T-HV P/P
Cover, width 2.2 mm
Jumper
gray
D-UT 6-T-HV
Ordering data
Order No.
Pcs. /
Pkt.
3070134
3070121
50
50
Order No.
Pcs. /
Pkt.
UT 6-T/SP
3072815
50
UTD 6/SP
3072817
50
3072816
50
Type
Imax
Accessories
Pre-assembled bridge, labeled
3-pos., positions 1, 3
4-pos., positions 1, 4
5-pos., positions 1, 5
5-pos., positions 1, 3, 5
10-pos., positions 1, 4, 7, 10
Fixed bridge, 10-pos.
Height NS 35/7,5
53
Height NS 32
58
max. Ø [mm²] AWG (UL)
0.2 - 10
20-8
CSA
IEC/
EN 60079-7
-
Accessories
3070147
50
D-UT 6-T/SP
2
3
4
5
10
red
red
red
red
red
FBS 2-8
FBS 3-8
FBS 4-8
FBS 5-8
FBS 10-8
41 A
41 A
41 A
41 A
41 A
3030284
3030297
3030307
3030310
3030323
10
10
10
10
10
FBS 2-8
FBS 3-8
FBS 4-8
FBS 5-8
FBS 10-8
41 A
41 A
41 A
41 A
41 A
3030284
3030297
3030307
3030310
3030323
10
10
10
10
10
3
4
5
5
10
red
red
red
red
red
FBS
FBS
FBS
FBS
FBS
24 A
24 A
24 A
24 A
24 A
3032363
3032376
3032381
3032389
3032402
10
10
10
10
10
FBS
FBS
FBS
FBS
FBS
24 A
24 A
24 A
24 A
24 A
3032363
3032376
3032381
3032389
3032402
10
10
10
10
10
10
silver
SCBI 10-8,15
3245134
10
10
silver
SCBI 10-8,15 ISO
3000417
10
2
3
4
orange
orange
orange
32 A
32 A
32 A
3075842
3075843
3075844
10
10
10
SB-MER 2-8
25 A
SB-MER 3-8
25 A
SB-MER 4-8
25 A
TPS 3/20/5
PAI-4-FIX YE
PAI-4-FIX GN
PAI-4-FIX VT
PAI-4-FIX BK
PAI-4-FIX BU
PAI-4-FIX VT
PAI-4-FIX BK
PAI-4-FIX BN
PAI-4-FIX GY
PSBJ 6-T YE
PSBJ 6-T GN
PSBJ 6-T VT
PSBJ 6-T BK
PSBJ 6-T BU
www.stevenengineering.com
PSBJ 6-T RD
3000587
3000588
3000589
3246586
3032745
3032758
3032761
3032774
3032729
3032761
3032774
3032787
3032790
3070326
3070327
3070328
3070318
3070329
3070319
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
1/3-8
1/4-8
1/5-8
1/3/5-8
1/4/7/10-8
1/3-8
1/4-8
1/5-8
1/3/5-8
1/4/7/10-8
Isolator bridge bar, 10-pos.
Switching jumper
SB 6-T 2-8
SB 6-T 3-8
SB 6-T 4-8
Switching jumper, plug-in
2
3
4
Test socket
Test adapter, plug-in
Test adapter, screw-in
Courtesy of Steven
56
PHOENIX CONTACT
gray/orange
SB-MER 2-8
gray/orange
SB-MER 3-8
gray/orange
SB-MER 4-8
silver
yellow
PAI-4-FIX YE
green
PAI-4-FIX GN
violet
PAI-4-FIX VT
black
PAI-4-FIX BK
blue
PAI-4-FIX BU
violet
PAI-4-FIX VT
black
PAI-4-FIX BK
brown
PAI-4-FIX BN
gray
PAI-4-FIX GY
yellow
green
violet
black
blue
Engineering,
Inc. - (800)
red
30 A
30 A
30 A
3000587
3000588
3000589
10
10
10
3032745
3032758
3032761
3032774
3032729
3032761
3032774
3032787
3032790
10
10
10
10
10
10
10
10
10
258-9200 - sales@steveneng.com -
Terminal blocks - CLIPLINE complete
6 mm2 UT... screw connection terminal blocks
Test disconnect terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 52.
②
For corresponding terminal strip covers, see Catalog 5.
30 A, test disconnect terminal block
41 A, feed-through terminal block and ground
terminal, same shape


Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
8.2
100.8
Imax. [A] Umax. [V] 30
500
41 (FBS) / 32 (FBSR) IEC
UL / CUL
500
600
30 / 6
30 / -
Technical data1)
Height
49.6 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 10
24-8
CSA
600
30 / -
Ex
-
Width
Length
8.2
100.8
Imax. [A] Umax. [V] 41
500
41 (FBS) / 32 (FBSR)
IEC
UL / CUL
500
600
41 / 6
30 / -
Ordering data
Description
Color
Test disconnect terminal block
Ground terminal
gray
gray
green-yellow
Type
UTME 6
①
gray
Order No.
Ex
-
3047400
Order No.
Pcs. /
Pkt.
①
②
3047413
3047442
50
50
3047426
10
Type
UTMED 6
UTMED 6-PE
D-UTME 6
CSA
600
30 / -
Ordering data
Pcs. /
Pkt.
50
Accessories1)
Cover, width 2.2 mm
Height
49.6 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 10
24-8
Accessories1)
3047426
10
D-UTME 6
Supplementary accessories for UTME 6
test disconnect terminal blocks
Ordering data
Description
Test adapter, for 4 mm Ø safety test
plugs, latches into the bridge shaft
– Only two UTME 6 test disconnect
terminal blocks are required for a current
transformer measuring circuit
– Less space required compared to creating
circuits with slide-type terminal blocks
① FBS... jumper for cross connection
② 4 mm Ø PAI-4-FIX... test plug adapter
③ S-ME 6 switching lock
④ SB-ME... switching jumper
⑤ C-ME 6/2 connection bridge
No. of
pos.
1
1
1
1
1
1
1
1
1
Switching lock, plug-in
Switching jumper, plug-in
2
3
4
Operating lever, for actuating test
disconnect terminal blocks
2
3
orange
PAI-4-FIX-5/6 OG
3035974
Pcs. /
Pkt.
10
yellow
green
violet
black
blue
red
gray
brown
white
gray/orange
gray/orange
gray/orange
orange
PAI-4-FIX-5/6 YE
PAI-4-FIX-5/6 GN
PAI-4-FIX-5/6 VT
PAI-4-FIX-5/6 BK
PAI-4-FIX-5/6 BU
PAI-4-FIX-5/6 RD
PAI-4-FIX-5/6 GY
PAI-4-FIX-5/6 BN
S-ME 6
SB-ME 2-8
SB-ME 3-8
SB-ME 4-8
C-ME 6/1
3035977
3035978
3035979
3035980
3035975
3035976
3035982
3035981
3034439
3034468
3032800
3034484
3034441
10
10
10
10
10
10
10
10
10
10
10
10
10
C-ME 6/2
C-ME 6/3
3034442
3034390
10
50
Color
orange
orange
Type
Order No.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
57
Terminal blocks - CLIPLINE complete
6 mm2 UT... screw connection terminal blocks
Installation terminal blocks
①
Notes:
1)
For additional accessories and technical data, see page 52.
Assembly instruction:
In order to securely fix the neutral busbar in place, support
brackets must be placed at the beginning and end of each terminal
strip as well as every 20 cm on longer terminal strips.
The corresponding support brackets can be found at
phoenixcontact.net/products
41 A, neutral disconnect terminal block

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
Length
8.2
55
Imax. [A] Umax. [V] 41
400
41 (FBS) / 32 (FBSR) IEC
UL / CUL
400
41 / 6
-
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.2 - 10
CSA
-
Ex
-
Ordering data
Description
Terminal block
Color
blue
Type
UTN 6
Order No.
①
3245037
Pcs. /
Pkt.
50
3245079
3245082
50
50
Accessories1)
Cover, width 2.2 mm
Support bracket
blue
blue
D-UTN 2,5/10
AB-UTN 2,5/10
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
58
PHOENIX CONTACT
Terminal blocks - CLIPLINE complete
6 mm2 UT... screw connection terminal blocks
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
59
Terminal blocks - CLIPLINE complete
10 mm2 UT... screw connection terminal blocks
General technical data for 10 mm2 UT... screw connection terminal blocks
Rated data
Rated cross section
Cross section range
Connection capacity
[mm²]
AWG
IEC 60947-7-1 / IEC 60947-7-2
10
20 - 6
solid
stranded
1 conductor
[mm²]
0.5 - 16
2 conductors (of the same type)
[mm²]
0.5 - 4
2 stranded conductors with a TWIN ferrule
[mm²]
General data
Stripping length
[mm]
10
Screw thread
M4
Tightening torque
[Nm]
1.5 - 1.8
Insulating material
PA
Inflammability class according to UL 94
V0
Note: additional or deviating data is documented for the product.
0.5 - 16
0.5 - 4
-
Notes:
Ferrule
without/with plastic sleeve
0.5 - 10
0.5 - 10
0.5 - 2.5
0.5 - 6
In addition to the product, the internal electrical wiring is provided
as a circuit diagram. Free connection points for bridging are
indicated by a black dot.
The specified technical data and approvals refer to the first product
in each column. For information on the products below, please
refer to phoenixcontact.net/products
1) The bridge current is documented for the respective product. For
additional colors, see page 340.
System accessories for 10 mm2 UT... screw connection terminal blocks
Number of
positions
2
5
Description
① Jumper1)
 Tap-off terminal block
Screwdriver
Color
red
red
gray
Type
Order No.
FBS 2-10
FBS 5-10
AGK 4-UT 10
SZS 1,0X4,0 VDE
3005947
3005948
3047112
1205066
Pcs. /
Pkt.
10
10
50
10
Type
⑭ Reducing bridge
⑰ Partition plates/end cover segments
For RB ..., see page 344.
For ATP-... / DS-..., visit phoenixcontact.net/products
⑱ Cover
⑳ Warning labels
 Lateral groove marking
 DIN rails and end brackets
For full accessories, visit phoenixcontact.net/products
Documented for the product.
For WS ..., see page 353.
UC-TM 10, UCT-TM 10 or ZB 10. See also Catalog 5, selection tables from page 100.
See Catalog 5.
Note: additional or deviating accessories are documented for the product.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
60
PHOENIX CONTACT
Order No.
Pcs. /
Pkt.
Terminal blocks - CLIPLINE complete
10 mm2 UT... screw connection terminal blocks
Feed-through terminal blocks and
ground terminals
①
Notes:
1)
②
For additional accessories and technical data, see page 60.
For information on installation and using accessories for Ex
applications, see page 602.
76 A, feed-through terminal block and ground
terminal

Ex:  
KEMA 04ATEX2048 U / IECEx KEM 06.0027U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
10.2
Imax. [A] 76
57 IEC
1000
57 / 10
Length
47.7
Umax. [V] 1000
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.5 - 16
20-6
UL / CUL
600
65 / -
CSA
600
65 / -
Ex
690
54 / 10
Ordering data
Description
Color
Terminal block
gray
blue
green-yellow
green-yellow
Ground terminal
With screw foot
Type
UT 10
UT 10 BU
UT 10-PE
UT 10-PE/S
①
①
②
②
3044160
3044188
3044173
3215054
Pcs. /
Pkt.
50
50
50
50
3047028
50
Order No.
Accessories1)
Cover, width 2.2 mm
gray
Installation terminal blocks
D-UT 2,5/10
①
Notes:
1)
For additional accessories and technical data, see page 60.
Assembly instruction:
In order to securely fix the neutral busbar in place, support
brackets must be placed at the beginning and end of each terminal
strip as well as every 20 cm on longer terminal strips.
The corresponding support brackets can be found at
phoenixcontact.net/products
57 A, neutral disconnect terminal block

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
10.2
Imax. [A] 57
57 IEC
400
57 / 10
Length
55
Umax. [V] 400
Height
47.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
0.5 - 16
-
UL / CUL
-
CSA
-
Ex
-
Ordering data
Description
Terminal block
Color
blue
Type
UTN 10
①
3245040
Pcs. /
Pkt.
50
3245079
3245082
50
50
Order No.
Accessories1)
Cover, width 2.2 mm
Support bracket
blue
blue
D-UTN 2,5/10
AB-UTN 2,5/10
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
61
Terminal blocks - CLIPLINE complete
16 mm2 UT... screw connection terminal blocks
General technical data for 16 mm2 UT... screw connection terminal blocks
Rated data
Rated cross section
Cross section range
Connection capacity
[mm²]
AWG
IEC 60947-7-1 / IEC 60947-7-2
16
16 - 4
solid
stranded
1 conductor
[mm²]
1.5 - 25
2 conductors (of the same type)
[mm²]
1-6
2 stranded conductors with a TWIN ferrule
[mm²]
General data
Stripping length
[mm]
14
Screw thread
M5
Tightening torque
[Nm]
2.5 - 3
Insulating material
PA
Inflammability class according to UL 94
V0
Note: additional or deviating data is documented for the product.
1.5 - 25
1-6
-
Notes:
Ferrule
without/with plastic sleeve
1 - 16
1 - 16
1-6
0.75 - 10
In addition to the product, the internal electrical wiring is provided
as a circuit diagram. Free connection points for bridging are
indicated by a black dot.
The specified technical data and approvals refer to the first product
in each column. For information on the products below, please
refer to phoenixcontact.net/products
1) The bridge current is documented for the respective product. For
additional colors, see page 340.
System accessories for 16 mm2 UT... screw connection terminal blocks
Number of
positions
2
Description
① Jumper1)
 Tap-off terminal block
Screwdriver
Color
red
gray
Type
Order No.
FBS 2-12
AGK 4-UT 16
SZS 1,0X6,5 VDE
3005950
3047125
1205079
Pcs. /
Pkt.
10
50
10
Type
⑭ Reducing bridge
⑰ Partition plates/end cover segments
For RB ..., see page 344.
For ATP-... / DS-..., visit phoenixcontact.net/products
⑱ Cover
⑳ Warning labels
 Lateral groove marking
 DIN rails and end brackets
For full accessories, visit phoenixcontact.net/products
Documented for the product.
For WS ..., see page 353.
UC-TM 12, UCT-TM 12 or ZB 12. See also Catalog 5, selection tables from page 100.
See Catalog 5.
Note: additional or deviating accessories are documented for the product.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
62
PHOENIX CONTACT
Order No.
Pcs. /
Pkt.
Terminal blocks - CLIPLINE complete
16 mm2 UT... screw connection terminal blocks
Feed-through terminal blocks and
ground terminals
①
Notes:
1)
②
For additional accessories and technical data, see page 62.
For information on installation and using accessories for Ex
applications, see page 602.
③
101 A, feed-through terminal block and
ground terminal

Ex:   EAC Ex 
KEMA 04ATEX2048 U / IECEx KEM 06.0027U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
12.2
Imax. [A] 101
76 IEC
1000
76 / 16
Length
55.5
Umax. [V] 1000
Height
55 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
1.5 - 25
16-4
UL / CUL
600
85 / -
CSA
600
85 / -
Ex
690
73.5 / 16
Ordering data
Description
Color
Terminal block
gray
blue
green-yellow
green-yellow
Ground terminal
With screw foot
Type
UT 16
UT 16 BU
UT 16-PE
UT 16-PE/S
①
①
②
③
3044199
3044209
3044212
3215915
Pcs. /
Pkt.
50
50
50
50
3047206
50
Order No.
Accessories1)
Cover, width 2.2 mm
gray
Installation terminal blocks
D-UT 16
①
①
Notes:
1)
For additional accessories and technical data, see page 62.
②
Only the FBI 10-12 bridge (Order No. 0203454) can be used for
UTI 16.
Assembly instruction:
In order to securely fix the neutral busbar in place, support
brackets must be placed at the beginning and end of each terminal
strip as well as every 20 cm on longer terminal strips.
The corresponding support brackets can be found at
phoenixcontact.net/products
76 A, neutral disconnect terminal block

76 A, feed-through terminal block and ground
terminal

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Cross section range
Connection capacity
1 conductor
2 conductors (of the same type)
General data
Stripping length
Inflammability class according to UL 94
[A]
[V]
[A] / [mm²]
AWG
[mm²]
[mm²]
[mm]
Technical data1)
Width
12.2
Imax. [A] 76
- IEC
400
76 / 16
10 - 4
solid
Length
55
Umax. [V] 400
Height
50.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
6 - 25
-
UL / CUL
stranded
CSA
-
6 - 25
2.5 - 10
6 - 16
2.5 - 6
Ex
Ferrule
without/with plastic sleeve
6 - 16
6 - 16
4-6
-
12
V2
Width
12.2
Imax. [A] 76
101
IEC
400
76 / 16
10 - 4
solid
Length
51
Umax. [V] 400
Height
50.5 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
6 - 25
-
UL / CUL
stranded
CSA
-
6 - 25
2.5 - 10
6 - 16
2.5 - 6
12
V2
Ordering data
Description
Terminal block
Ground terminal
Color
gray
blue
green-yellow
Ex
Ferrule
without/with plastic sleeve
6 - 16
6 - 16
4-6
-
Type
UTN 16
①
Ordering data
Order No.
Pcs. /
Pkt.
3245053
50
Type
UTI 16
UTI 16 BU
UTI 16-PE
Order No.
①
①
②
3073827
3075728
3073830
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
Pcs. /
Pkt.
50
50
50
63
Terminal blocks - CLIPLINE complete
35 mm2 UT... screw connection terminal blocks
General technical data for 35 mm2 UT... screw connection terminal blocks
Rated data
Rated cross section
Cross section range
Connection capacity
[mm²]
AWG
IEC 60947-7-1 / IEC 60947-7-2
35
16 - 1/0
solid
stranded
1 conductor
[mm²]
1.5 - 50
2 conductors (of the same type)
[mm²]
1.5 - 16
2 stranded conductors with a TWIN ferrule
[mm²]
General data
Stripping length
[mm]
18
Screw thread
M6
Tightening torque
[Nm]
3.2 - 3.7
Insulating material
PA
Inflammability class according to UL 94
V0
Note: additional or deviating data is documented for the product.
1.5 - 50
1.5 - 10
-
Notes:
Ferrule
without/with plastic sleeve
1.5 - 35
1.5 - 35
1.5 - 10
1.5 - 16
In addition to the product, the internal electrical wiring is provided
as a circuit diagram. Free connection points for bridging are
indicated by a black dot.
The specified technical data and approvals refer to the first product
in each column. For information on the products below, please
refer to phoenixcontact.net/products
1) The bridge current is documented for the respective product. For
additional colors, see page 340.
System accessories for 35 mm2 UT... screw connection terminal blocks
Number of
positions
2
Description
① Jumper1)
 Tap-off terminal block
Screwdriver
Color
red
gray
Type
Order No.
FBS 2-16
AGK 4-UT 35
SZS 1,0X6,5 VDE
3005963
3047138
1205079
Pcs. /
Pkt.
10
50
10
Type
⑭ Reducing bridge
⑰ Partition plates/end cover segments
For RB ..., see page 344.
For ATP-... / DS-..., visit phoenixcontact.net/products
⑱ Cover
⑳ Warning labels
 Lateral groove marking
 DIN rails and end brackets
For full accessories, visit phoenixcontact.net/products
Documented for the product.
For WS ..., see page 353.
UC-TM 16, UCT-TM 16 or ZB 16,3. See also Catalog 5, selection tables from page 100.
See Catalog 5.
Note: additional or deviating accessories are documented for the product.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
64
PHOENIX CONTACT
Order No.
Pcs. /
Pkt.
Terminal blocks - CLIPLINE complete
35 mm2 UT... screw connection terminal blocks
Feed-through terminal blocks and
ground terminals
①
①
Notes:
1)
②
For additional accessories and technical data, see page 64.
For information on installation and using accessories for Ex
applications, see page 602.
150 A, feed-through terminal block
125 A, ground terminal

Ex:  

Ex:  
KEMA 04ATEX2048 U / IECEx KEM 06.0027U
KEMA 04ATEX2048 U / IECEx KEM 06.0027U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Cross section range
Connection capacity
1 conductor
[A]
[V]
[A] / [mm²]
AWG
[mm²]
Technical data1)
Width
16
Imax. [A] 150
101 IEC
1000
125 / 35
16 - 1/0
solid
Length
60.2
Umax. [V] 1000
Height
65.7 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
1.5 - 50
14-1/0
UL / CUL
600
150 / stranded
CSA
600
150 / -
1.5 - 50
1.5 - 50
Ex
690
126 / 35
Ferrule
without/with plastic sleeve
1.5 - 35
1.5 - 35
Width
16
Imax. [A] 125
101
IEC
125 / 35
16 - 2
solid
Length
60.2
Height
65.7 (NS 35/7,5)
max. Ø [mm²] AWG (UL)
1.5 - 35
14-2
UL / CUL
stranded
CSA
-
1.5 - 35
1.5 - 35
Ordering data
Description
Color
Terminal block
gray
blue
green-yellow
green-yellow
Ground terminal
With screw foot
Installation terminal blocks
Type
UT 35
UT 35 BU
①
①
Ex
- / 35
Ferrule
without/with plastic sleeve
1.5 - 35
1.5 - 35
Ordering data
Order No.
3044225
3044238
Pcs. /
Pkt.
50
50
UT 35-PE
UT 35-PE/S
①
Order No.
Pcs. /
Pkt.
①
②
3044241
3215928
50
50
Type
①
Notes:
1)
For additional accessories and technical data, see page 64.
②
Only FB I...-12 bridges can be used for UTI 35.
Assembly instruction:
In order to securely fix the neutral busbar in place, support
brackets must be placed at the beginning and end of each terminal
strip as well as every 20 cm on longer terminal strips.
The corresponding support brackets can be found at
phoenixcontact.net/products
110 A, neutral disconnect terminal block

125 A, feed-through terminal block and
ground terminal

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
Cross section range
Connection capacity
1 conductor
2 conductors (of the same type)
General data
Stripping length
Inflammability class according to UL 94
[A]
[V]
[A] / [mm²]
AWG
[mm²]
[mm²]
[mm]
Technical data1)
Width
15
Imax. [A] 110
- IEC
400
110 / 35
18 - 2
solid
Length
55
Umax. [V] 400
Height
51 (NS 35/7,5) / 56 (NS 32)
max. Ø [mm²] AWG (UL)
0.75 - 35
-
UL / CUL
stranded
CSA
-
0.75 - 35
0.75 - 10
0.75 - 35
0.75 - 10
Ex
Ferrule
without/with plastic sleeve
0.75 - 35
0.75 - 35
0.75 - 10
-
16
V2
Width
15.2
Imax. [A] 125
135
IEC
800
125 / 35
18 - 2
solid
Length
55
Umax. [V] 800
Height
51 (NS 35/7,5) / 56 (NS 32)
max. Ø [mm²] AWG (UL)
0.75 - 35
-
UL / CUL
stranded
CSA
-
0.75 - 35
0.75 - 10
0.75 - 35
0.75 - 10
16
V2
Ordering data
Description
Terminal block
Ground terminal, closed
Color
gray
blue
green-yellow
Ex
Ferrule
without/with plastic sleeve
0.75 - 35
0.75 - 35
0.75 - 10
-
Type
UTN 35
①
Ordering data
Order No.
Pcs. /
Pkt.
3245066
50
Type
UTI 35
UTI 35 BU
UTI 35-PE
Order No.
①
①
②
3074088
3075731
3074091
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
Pcs. /
Pkt.
50
50
50
65
Terminal blocks - CLIPLINE complete
50 mm2 UKH... screw connection terminal blocks
General technical data for 50 mm2 UKH... screw connection terminal blocks
Rated data
Rated cross section
Cross section range
Connection capacity
[mm²]
AWG
IEC 60947-7-1 / IEC 60947-7-2
50
6 - 2/0
solid
stranded
1 conductor
[mm²]
16 - 70
2 conductors (of the same type)
[mm²]
10 - 16
2 stranded conductors with a TWIN ferrule
[mm²]
General data
Stripping length
[mm]
24
Screw thread
M6
Tightening torque
[Nm]
6-8
Insulating material
PA
Inflammability class according to UL 94
V0
Note: additional or deviating data is documented for the product.
25 - 70
10 - 16
-
Notes:
Ferrule
without/with plastic sleeve
25 - 50
25 - 50
10 - 16
-
In addition to the product, the internal electrical wiring is provided
as a circuit diagram. Free connection points for bridging are
indicated by a black dot.
The specified technical data and approvals refer to the first product
in each column. For information on the products below, please
refer to phoenixcontact.net/products
1) The bridge current is documented for the respective product. For
additional colors, see page 340.
System accessories for 50 mm2 UKH... screw connection terminal blocks
Number of
positions
2
3
Description
⑲ Fixed bridge1)
⑪ Insertion profile for flat conductor
connection, see page 496
 Tap-off terminal block
Screwdriver
 Lateral groove marking
 DIN rails and end brackets
For full accessories, visit phoenixcontact.net/products
0201346
0201317
3009228
Pcs. /
Pkt.
10
10
10
3001763
1205082
10
10
Color
Type
Order No.
silver
silver
silver
FBI 2-20
FBI 3-20
UKH 50 EP
AGK 10-UKH 50
SZS 1,2X8,0 VDE
gray
Type
UC-TM 10, UCT-TM 10 or ZB 10. See also Catalog 5, selection tables from page 100.
See Catalog 5.
Note: additional or deviating accessories are documented for the product.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
66
PHOENIX CONTACT
Order No.
Pcs. /
Pkt.
Terminal blocks - CLIPLINE complete
50 mm2 UKH... screw connection terminal blocks
High-current terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 66.
②
For information on installation and using accessories for Ex
applications, see page 602.
150 A, feed-through terminal block
150 A, terminal block bases
        CCA 
Ex:   

KEMA 98ATEX1786U / IECEx KEM 06.0029U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
20
Imax. [A] 150
150 IEC
1000
150 / 50
Technical data1)
Length
75.5
Umax. [V] 1000
Height
83.5 (NS 35/15) / 81 (NS 32)
max. Ø [mm²] AWG (UL)
16 - 70
6-1/0
UL / CUL
600
150 / -
CSA
600
150 / -
Ex
690
133 / 50
Width
60
Imax. [A] 150
150
IEC
1000
150 / 50
Length
75.5
Umax. [V] 1000
Height
83.5 (NS 35/15) / 81 (NS 32)
max. Ø [mm²] AWG (UL)
16 - 70
-
UL / CUL
-
CSA
-
Ordering data
Description
Color
Terminal block
Ground terminal
Terminal block base, 3 x gray
3 x gray, 1 x blue
3 x gray, 1 x black-yellow
3 x gray, 1 x blue, 1 x black-yellow
gray
blue
green-yellow
gray
gray/blue
gray/blackyellow
gray/blue/black
-yellow
High-current terminal blocks for
direct mounting
Type
UKH 50
UKH 50 BU
USLKG 50
①
①
②
Ex
-
Ordering data
Order No.
3009118
3009105
0443049
Pcs. /
Pkt.
10
10
10
①
Type
Pcs. /
Pkt.
Order No.
UKH 50-3L
UKH 50-3L/N
UKH 50-3L/FE
①
①
①
3076634
3076635
3076636
3
2
2
UKH 50-3L/N/FE
①
3076637
2
①
Notes:
1)
For additional accessories and technical data, see page 66.
150 A, feed-through terminal block for direct
mounting

150 A, terminal block base for direct mounting

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
20
Imax. [A] 150
150 IEC
1000
150 / 50
Technical data1)
Length
103.4
Umax. [V] 1000
Height
76
max. Ø [mm²]
16 - 70
AWG (UL)
-
UL / CUL
-
CSA
-
Ex
-
Width
60
Imax. [A] 150
150
IEC
1000
150 / 50
Length
103.4
Umax. [V] 1000
Height
76
max. Ø [mm²]
16 - 70
AWG (UL)
-
UL / CUL
-
CSA
-
Ex
-
Ordering data
Description
Color
Terminal block, for direct mounting
Terminal block base, for direct mounting, 3 x
gray
3 x gray, 1 x blue
3 x gray, 1 x black-yellow
3 x gray, 1 x blue, 1 x black-yellow
gray
gray
gray/blue
gray/blackyellow
gray/blue/black
-yellow
Type
UKH 50-F
①
Ordering data
Order No.
3247019
Pcs. /
Pkt.
10
Type
Pcs. /
Pkt.
Order No.
UKH 50-3L-F
①
3076638
3
UKH 50-3L/N-F
UKH 50-3L/FE-F
①
①
3076639
3076640
2
3
UKH 50-3L/N/FE-F
①
3076641
2
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
67
Terminal blocks - CLIPLINE complete
70 mm2 UKH... screw connection terminal blocks
General technical data for 70 mm2 UKH... screw connection terminal blocks
Rated data
Rated cross section
Cross section range
Connection capacity
[mm²]
AWG
IEC 60947-7-1 / IEC 60947-7-2
70
4 - 3/0
solid
stranded
1 conductor
[mm²]
16 - 95
2 conductors (of the same type)
[mm²]
16 - 25
2 stranded conductors with a TWIN ferrule
[mm²]
General data
Stripping length
[mm]
24
Screw thread
M8
Tightening torque
[Nm]
8 - 10
Insulating material
PA
Inflammability class according to UL 94
V0
Note: additional or deviating data is documented for the product.
25 - 70
16 - 25
-
Notes:
Ferrule
without/with plastic sleeve
16 - 70
16 - 70
16 - 25
-
In addition to the product, the internal electrical wiring is provided
as a circuit diagram. Free connection points for bridging are
indicated by a black dot.
The specified technical data and approvals refer to the first product
in each column. For information on the products below, please
refer to phoenixcontact.net/products
1) The bridge current is documented for the respective product. For
additional colors, see page 340.
System accessories for 70 mm2 UKH... screw connection terminal blocks
Number of
positions
2
3
Description
⑲ Fixed bridge1)
⑪ Insertion profile for flat conductor
connection, see page 496
 Tap-off terminal block
Allen key
 Lateral groove marking
 DIN rails and end brackets
For full accessories, visit phoenixcontact.net/products
3213195
3213205
3009228
Pcs. /
Pkt.
10
10
10
3001763
1201934
10
1
Color
Type
Order No.
silver
silver
silver
FBI 2-20 N
FBI 3-20 N
UKH 50 EP
AGK 10-UKH 50
VDE-ISS 6
gray
Type
UC-TM 10, UCT-TM 10 or ZB 10. See also Catalog 5, selection tables from page 100.
See Catalog 5.
Note: additional or deviating accessories are documented for the product.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
68
PHOENIX CONTACT
Order No.
Pcs. /
Pkt.
Terminal blocks - CLIPLINE complete
70 mm2 UKH... screw connection terminal blocks
High-current terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 68.
②
For information on installation and using accessories for Ex
applications, see page 602.
192 A, feed-through terminal block
192 A, terminal block bases

Ex:  

SEV12ATEX0168U / IECEx SEV12.0008U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
20.3
Imax. [A] 192
192 IEC
1000
192 / 70
Technical data1)
Length
70.5
Umax. [V] 1000
Height
80 (NS 35/7,5) / 85 (NS 32)
max. Ø [mm²] AWG (UL)
16 - 95
6-3/0
UL / CUL
1000
192 / -
CSA
1000
192 / -
Ex
880
180 / 70
Width
60.9
Imax. [A] 192
192
IEC
1000
192 / 70
Length
70.5
Umax. [V] 1000
Height
87.5 (NS 35/15) / 85 (NS 32)
max. Ø [mm²] AWG (UL)
16 - 95
-
UL / CUL
-
CSA
-
Ordering data
Description
Color
Terminal block
Ground terminal
Terminal block base, 3 x gray
3 x gray, 1 x blue
3 x gray, 1 x black-yellow
3 x gray, 1 x blue, 1 x black-yellow
gray
blue
green-yellow
gray
gray/blue
gray/blackyellow
gray/blue/black
-yellow
High-current terminal blocks for
direct mounting
Type
UKH 70
UKH 70 BU
UKH 70-PE/S
①
①
②
Ex
-
Ordering data
Order No.
3213140
3244601
3213141
Pcs. /
Pkt.
10
10
10
①
Type
Pcs. /
Pkt.
Order No.
UKH 70-3L
UKH 70-3L/N
UKH 70-3L/FE
①
①
①
3076329
3076361
3076400
4
3
3
UKH 70-3L/N/FE
①
3076442
2
①
Notes:
1)
For additional accessories and technical data, see page 68.
192 A, feed-through terminal block for direct
mounting

192 A, terminal block bases for direct
mounting

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
20.3
Imax. [A] 192
192 IEC
1000
192 / 70
Technical data1)
Length
103.4
Umax. [V] 1000
Height
80
max. Ø [mm²]
16 - 95
AWG (UL)
-
UL / CUL
-
CSA
-
Ex
-
Width
60.9
Imax. [A] 192
192
IEC
1000
192 / 70
Length
103.4
Umax. [V] 1000
Height
80
max. Ø [mm²]
16 - 95
AWG (UL)
-
UL / CUL
-
CSA
-
Ex
-
Ordering data
Description
Color
Terminal block, for direct mounting
Terminal block base, for direct mounting, 3 x
gray
3 x gray, 1 x blue
3 x gray, 1 x black-yellow
3 x gray, 1 x blue, 1 x black-yellow
gray
gray
gray/blue
gray/blackyellow
gray/blue/black
-yellow
Type
UKH 70-F
①
Ordering data
Order No.
3247051
Pcs. /
Pkt.
10
Type
Pcs. /
Pkt.
Order No.
UKH 70-3L-F
①
3076484
4
UKH 70-3L/N-F
UKH 70-3L/FE-F
①
①
3076523
3076565
3
3
UKH 70-3L/N/FE-F
①
3076604
2
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
69
Terminal blocks - CLIPLINE complete
70 mm2 UKH... screw connection terminal blocks
High-current terminal blocks
new
Notes:
For additional accessories and technical data, see page 68
192 A, power terminal, 4 x 10 mm² outlets
Technical data
Dimensions
[mm]
– Compact high-current terminal blocks
with 1500 V nominal voltage
– For use in renewable power generation specifically in photovoltaics
– Four integrated pick-off terminal blocks
with a 10 mm2 cross section for a simple
power supply or potential distribution
– Compact, space-saving design
– Bridgeable with screw-type bridges for
easy potential distribution
– Large-surface marking options
Dimensions
[mm]
Dimensions
[mm]
Max. electrical data
Rated data
Rated voltage
Nominal current / cross section
Rated cross section
Cross section range
Supply connection capacity
[V]
[A] / [mm²]
[mm²]
AWG
1 conductor
2 conductors (of the same type)
Branch connection capacity
[mm²]
[mm²]
1 conductor
2 conductors (of the same type)
[mm²]
[mm²]
Width
20.3
Width
20.3
Width
20.3
Imax. [A] 192
IEC 60947-7-1
IEC
Length
88.6
Length
88.6
Length
88.6
Umax. [V] 1500
1500
192 / 70
4 - 3/0
solid
16 - 95
16 - 25
solid
1.5 - 16
0.5 - 4
-/stranded
25 - 70
16 - 25
stranded
0.5 - 16
0.5 - 4
UL
Height NS 35/7,5
80
Height NS 35/15
87.5
Height NS 32
85
max. Ø [mm²] AWG (UL)
16 - 95
CSA
IEC/
EN 60079-7
-/Ferrule
without/with plastic sleeve
16 - 70
16 - 70
16 - 25
Ferrule
without/with plastic sleeve
0.5 - 10
0.5 - 10
0.5 - 2.5
-
Ordering data
Description
Terminal block
Ground terminal
Color
gray
blue
green/yellow
Type
Order No.
Pcs. /
Pkt.
UKH 70/4X10
UKH 70/4X10 BU
3213142
3213143
10
10
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
70
PHOENIX CONTACT
Terminal blocks - CLIPLINE complete
70 mm2 UKH... screw connection terminal blocks
new
192 A, ground terminal, 4 x 10 mm² outlets
Technical data
Width
20.3
Width
20.3
Width
20.3
Imax. [A] 192
IEC 60947-7-2
IEC
Length
88.6
Length
88.6
Length
88.6
Umax. [V] 1000
1000
192 / 70
70
4 - 3/0
solid
16 - 95
16 - 25
solid
1.5 - 16
0.5 - 4
-/stranded
25 - 70
16 - 25
stranded
0.5 - 16
0.5 - 4
UL
Height NS 35/7,5
80
Height NS 35/15
87.5
Height NS 32
85
max. Ø [mm²] AWG (UL)
16 - 95
CSA
IEC/
EN 60079-7
-/Ferrule
without/with plastic sleeve
16 - 70
16 - 70
16 - 25
Ferrule
without/with plastic sleeve
0.5 - 10
0.5 - 10
0.5 - 2.5
-
Ordering data
Type
UKH 70/4X10-PE
Order No.
Pcs. /
Pkt.
3213144
10
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
71
Terminal blocks - CLIPLINE complete
95 mm2 UKH... screw connection terminal blocks
General technical data for 95 mm2 UKH... screw connection terminal blocks
Rated data
Rated cross section
Cross section range
Connection capacity
[mm²]
AWG
IEC 60947-7-1 / IEC 60947-7-2
95
4 - 3/0
solid
stranded
1 conductor
[mm²]
25 - 95
2 conductors (of the same type)
[mm²]
25 - 35
2 stranded conductors with a TWIN ferrule
[mm²]
Max. cross section with insertion bridge
[mm²]
95
General data
Stripping length
[mm]
33
Screw thread
M8
Tightening torque
[Nm]
15 - 20
Insulating material
PA
Inflammability class according to UL 94
V0
Note: additional or deviating data is documented for the product.
35 - 95
25 - 35
70
Notes:
Ferrule
without/with plastic sleeve
35 - 95
35 - 95
16 - 35
-
In addition to the product, the internal electrical wiring is provided
as a circuit diagram. Free connection points for bridging are
indicated by a black dot.
The specified technical data and approvals refer to the first product
in each column. For information on the products below, please
refer to phoenixcontact.net/products
1) The bridge current is documented for the respective product. For
additional colors, see page 340.
System accessories for 95 mm2 UKH... screw connection terminal blocks
Number of
positions
2
3
Description
② Insertion bridge1)
⑪ Insertion profile for flat conductor
connection, see page 496.
 Tap-off terminal block
Allen key
 Lateral groove marking
 DIN rails and end brackets
For full accessories, visit phoenixcontact.net/products
0201362
0201375
3009231
Pcs. /
Pkt.
10
10
10
3003541
1201934
10
1
Color
Type
Order No.
gray
gray
silver
EB 2-25/UKH
EB 3-25/UKH
UKH 95 EP
AGK 10-UKH 95
VDE-ISS 6
gray
Type
UC-TM 10, UCT-TM 10 or ZB 10. See also Catalog 5, selection tables from page 100.
See Catalog 5.
Note: additional or deviating accessories are documented for the product.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
72
PHOENIX CONTACT
Order No.
Pcs. /
Pkt.
Terminal blocks - CLIPLINE complete
95 mm2 UKH... screw connection terminal blocks
High-current terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 72.
②
For information on installation and using accessories for Ex
applications, see page 602.
232 A, feed-through terminal block
232 A, terminal block base
         CCA
Ex:   

KEMA 98ATEX1786U / IECEx KEM 06.0029U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
25
Imax. [A] 232
232 IEC
1000
232 / 95
Technical data1)
Length
83
Umax. [V] 1000
Height
97.5 (NS 35/15) / 95 (NS 32)
max. Ø [mm²] AWG (UL)
25 - 95
2-4/0
UL / CUL
600
230 / -
CSA
600
200 / -
Ex
880
216 / 95
Width
75
Imax. [A] 232
232
IEC
1000
232 / 95
Length
82.8
Umax. [V] 1000
Height
97.5 (NS 35/15) / 95 (NS 32)
max. Ø [mm²] AWG (UL)
25 - 95
2-4/0
UL / CUL
600
230 / -
CSA
-
Ordering data
Description
Color
Terminal block
Ground terminal
Terminal block base, 3 x gray
3 x gray, 1 x blue
3 x gray, 1 x black-yellow
3 x gray, 1 x blue, 1 x black-yellow
gray
blue
green-yellow
gray
gray/blue
gray/blackyellow
gray/blue/black
-yellow
High-current terminal blocks for
direct mounting
Type
UKH 95
UKH 95 BU
USLKG 95
①
①
②
Ex
-
Ordering data
Order No.
3010013
3010136
0441041
Pcs. /
Pkt.
3
3
10
①
Type
Pcs. /
Pkt.
Order No.
UKH 95-3L
UKH 95-3L/N
UKH 95-3L/FE
①
①
①
3076332
3076374
3076413
3
2
2
UKH 95-3L/N/FE
①
3076455
2
①
Notes:
1)
For additional accessories and technical data, see page 72.
232 A, feed-through terminal block for direct
mounting

232 A, terminal block bases for direct
mounting

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
25
Imax. [A] 232
232 IEC
1000
232 / 95
Technical data1)
Length
118.8
Umax. [V] 1000
Height
90
max. Ø [mm²]
25 - 95
AWG (UL)
2-4/0
UL / CUL
600
230 / -
CSA
-
Ex
-
Width
75
Imax. [A] 232
232
IEC
1000
232 / 95
Length
118.8
Umax. [V] 1000
Height
90
max. Ø [mm²]
25 - 95
AWG (UL)
-
UL / CUL
-
CSA
-
Ex
-
Ordering data
Description
Color
Terminal block, for direct mounting
Terminal block base, for direct mounting,
3 x gray
3 x gray, 1 x blue
3 x gray, 1 x black-yellow
3 x gray, 1 x blue, 1 x black-yellow
gray
gray
gray/blue
gray/blackyellow
gray/blue/black
-yellow
Type
UKH 95-F
①
Ordering data
Order No.
3247022
Pcs. /
Pkt.
10
Type
Pcs. /
Pkt.
Order No.
UKH 95-3L-F
①
3076497
4
UKH 95-3L/N-F
UKH 95-3L/FE-F
①
①
3076536
3076578
2
2
UKH 95-3L/N/FE-F
①
3076617
2
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
73
Terminal blocks - CLIPLINE complete
150 mm2 UKH... screw connection terminal blocks
General technical data for 150 mm2 UKH... screw connection terminal blocks
Rated data
Rated cross section
Cross section range
Connection capacity
[mm²]
AWG
IEC 60947-7-1
150
2 - 300 kcmil
solid
1 conductor
[mm²]
35 - 150
2 conductors (of the same type)
[mm²]
25 - 50
2 stranded conductors with a TWIN ferrule
[mm²]
Max. cross section with insertion bridge
[mm²]
150
General data
Stripping length
[mm]
40
Screw thread
M10
Tightening torque
[Nm]
25 - 30
Insulating material
PA
Inflammability class according to UL 94
V0
Note: additional or deviating data is documented for the product.
Notes:
stranded
50 - 150
35 - 50
120
Ferrule
without/with plastic sleeve
50 - 150
50 - 150
25 - 50
-
In addition to the product, the internal electrical wiring is provided
as a circuit diagram. Free connection points for bridging are
indicated by a black dot.
The specified technical data and approvals refer to the first product
in each column. For information on the products below, please
refer to phoenixcontact.net/products
1) The bridge current is documented for the respective product. For
additional colors, see page 340.
System accessories for 150 mm2 UKH... screw connection terminal blocks
Number of
positions
2
3
Description
② Insertion bridge1)
⑪ Insertion profile for flat conductor
connection, see page 496.
 Tap-off terminal block
Allen key
 Lateral groove marking
 DIN rails and end brackets
For full accessories, visit phoenixcontact.net/products
0201388
0201391
3009244
Pcs. /
Pkt.
10
10
10
3003554
1201947
10
1
Color
Type
Order No.
gray
gray
silver
EB 2-31/UKH
EB 3-31/UKH
UKH 150/240 EP
AGK 10-UKH 150/240
VDE-ISS 8
gray
Type
UC-TM 10, UCT-TM 10 or ZB 10. See also Catalog 5, selection tables from page 100.
See Catalog 5.
Note: additional or deviating accessories are documented for the product.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
74
PHOENIX CONTACT
Order No.
Pcs. /
Pkt.
Terminal blocks - CLIPLINE complete
150 mm2 UKH... screw connection terminal blocks
High-current terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 74.
For information on installation and using accessories for Ex
applications, see page 602.
309 A, feed-through terminal block
309 A, terminal block base

Ex:   

KEMA 99ATEX8332 U / IECEx KEM 06.0030U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
31
Imax. [A] 309
300 IEC
1000
309 / 150
Technical data1)
Length
100
Umax. [V] 1000
Height
118.5 (NS 35/15) / 116 (NS 32)
max. Ø [mm²] AWG (UL)
35 - 150
2-300
UL / CUL
600
285 / -
CSA
600
275 / -
Ex
1100
256 / 150
Width
93
Imax. [A] 309
300
IEC
1000
309 / 150
Length
100
Umax. [V] 1000
Height
118.5 (NS 35/15) / 116 (NS 32)
max. Ø [mm²] AWG (UL)
35 - 150
2-300
UL / CUL
600
285 / -
CSA
-
Ordering data
Description
Color
Terminal block
Terminal block base, 3 x gray
3 x gray, 1 x blue
3 x gray, 1 x black-yellow
3 x gray, 1 x blue, 1 x black-yellow
gray
blue
gray
gray/blue
gray/blackyellow
gray/blue/black
-yellow
High-current terminal blocks for
direct mounting
Type
UKH 150
UKH 150 BU
①
①
Ex
-
Ordering data
Order No.
3010110
3010123
Pcs. /
Pkt.
3
3
①
Type
Pcs. /
Pkt.
Order No.
UKH 150-3L
UKH 150-3L/N
UKH 150-3L/FE
①
①
①
3076345
3076387
3076426
3
2
2
UKH 150-3L/N/FE
①
3076468
2
①
Notes:
1)
For additional accessories and technical data, see page 74.
309 A, feed-through terminal block for direct
mounting

309 A, terminal block bases for direct
mounting

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
31
Imax. [A] 309
300 IEC
1000
309 / 150
Technical data1)
Length
136.1
Umax. [V] 1000
Height
111
max. Ø [mm²]
35 - 150
AWG (UL)
2-300
UL / CUL
600
285 / -
CSA
-
Ex
-
Width
93
Imax. [A] 309
300
IEC
1000
309 / 150
Length
136.1
Umax. [V] 1000
Height
111
max. Ø [mm²]
35 - 150
AWG (UL)
-
UL / CUL
-
CSA
-
Ex
-
Ordering data
Description
Color
Terminal block, for direct mounting
Terminal block base, for direct mounting,
3 x gray
3 x gray, 1 x blue
3 x gray, 1 x black-yellow
3 x gray, 1 x blue, 1 x black-yellow
gray
gray
gray/blue
gray/blackyellow
gray/blue/black
-yellow
Type
UKH 150-F
①
Ordering data
Order No.
3247035
Pcs. /
Pkt.
10
Type
Pcs. /
Pkt.
Order No.
UKH 150-3L-F
①
3076507
4
UKH 150-3L/N-F
UKH 150-3L/FE-F
①
①
3076549
3076581
2
2
UKH 150-3L/N/FE-F
①
3076620
2
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
75
Terminal blocks - CLIPLINE complete
240 mm2 UKH... screw connection terminal blocks
General technical data for 240 mm2 UKH... screw connection terminal blocks
Rated data
Rated cross section
Cross section range
Connection capacity
[mm²]
AWG
IEC 60947-7-1
240
2/0 - 500 kcmil
solid
1 conductor
[mm²]
70 - 240
2 conductors (of the same type)
[mm²]
35 - 95
2 stranded conductors with a TWIN ferrule
[mm²]
Max. cross section with insertion bridge
[mm²]
240
General data
Stripping length
[mm]
40
Screw thread
M10
Tightening torque
[Nm]
25 - 30
Insulating material
PA
Inflammability class according to UL 94
V0
Note: additional or deviating data is documented for the product.
Notes:
stranded
70 - 240
50 - 95
185
Ferrule
without/with plastic sleeve
70 - 185
70 - 185
35 - 50
-
In addition to the product, the internal electrical wiring is provided
as a circuit diagram. Free connection points for bridging are
indicated by a black dot.
The specified technical data and approvals refer to the first product
in each column. For information on the products below, please
refer to phoenixcontact.net/products
1) The bridge current is documented for the respective product. For
additional colors, see page 340.
System accessories for 240 mm2 UKH... screw connection terminal blocks
Number of
positions
2
3
Description
② Insertion bridge1)
⑪ Insertion profile for flat conductor
connection, see page 496.
 Tap-off terminal block
Allen key
 Lateral groove marking
 DIN rails and end brackets
For full accessories, visit phoenixcontact.net/products
0201401
0201414
3009244
Pcs. /
Pkt.
10
10
10
3003554
1201947
10
1
Color
Type
Order No.
gray
gray
silver
EB 2-36/UKH
EB 3-36/UKH
UKH 150/240 EP
AGK 10-UKH 150/240
VDE-ISS 8
gray
Type
UC-TM 10, UCT-TM 10 or ZB 10. See also Catalog 5, selection tables from page 100.
See Catalog 5.
Note: additional or deviating accessories are documented for the product.
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
76
PHOENIX CONTACT
Order No.
Pcs. /
Pkt.
Terminal blocks - CLIPLINE complete
240 mm2 UKH... screw connection terminal blocks
High-current terminal blocks
①
①
Notes:
1)
For additional accessories and technical data, see page 76.
For information on installation and using accessories for Ex
applications, see page 602.
415 A, feed-through terminal block
415 A, terminal block bases

Ex:   

KEMA 99ATEX8332 U / IECEx KEM 06.0030U
Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
36
Imax. [A] 415
382 IEC
1000
415 / 240
Technical data1)
Length
100
Umax. [V] 1000
Height
131.5 (NS 35/15) / 129 (NS 32)
max. Ø [mm²] AWG (UL)
70 - 240
2/0-500
UL / CUL
600
380 / -
CSA
600
400 / -
Ex
1100
350 / 240
Width
108
Imax. [A] 415
382
IEC
1000
415 / 240
Length
100
Umax. [V] 1000
Height
131.5 (NS 35/15) / 129 (NS 32)
max. Ø [mm²] AWG (UL)
70 - 240
2/0-500
UL / CUL
600
380 / -
CSA
-
Ordering data
Description
Color
Terminal block
Terminal block base, 3 x gray
3 x gray, 1 x blue
3 x gray, 1 x black-yellow
3 x gray, 1 x blue, 1 x black-yellow
gray
blue
gray
gray/blue
gray/blackyellow
gray/blue/black
-yellow
High-current terminal blocks for
direct mounting
Type
UKH 240
UKH 240 BU
①
①
Ex
-
Ordering data
Order No.
3010217
0711852
Pcs. /
Pkt.
3
3
①
Type
Pcs. /
Pkt.
Order No.
UKH 240-3L
UKH 240-3L/N
UKH 240-3L/FE
①
①
①
3076358
3076390
3076439
3
2
2
UKH 240-3L/N/FE
①
3076471
2
①
Notes:
1)
For additional accessories and technical data, see page 76.
415 A, feed-through terminal block for direct
mounting

415 A, terminal block bases for direct
mounting

Technical data1)
Dimensions
[mm]
Max. electrical data
Max. bridge current
Rated data
Rated voltage
Nominal current / cross section
[A]
[V]
[A] / [mm²]
Width
36
Imax. [A] 415
382 IEC
1000
415 / 240
Technical data1)
Length
136.1
Umax. [V] 1000
Height
124
max. Ø [mm²]
70 - 240
AWG (UL)
2/0-500
UL / CUL
600
380 / -
CSA
-
Ex
-
Width
108
Imax. [A] 415
382
IEC
1000
415 / 240
Length
136.1
Umax. [V] 1000
Height
124
max. Ø [mm²]
70 - 240
AWG (UL)
-
UL / CUL
-
CSA
-
Ex
-
Ordering data
Description
Color
Terminal block, for direct mounting
Terminal block base, for direct mounting,
3 x gray
3 x gray, 1 x blue
3 x gray, 1 x black-yellow
3 x gray, 1 x blue, 1 x black-yellow
gray
gray
gray/blue
gray/blackyellow
gray/blue/black
-yellow
Type
UKH 240-F
①
Ordering data
Order No.
3247048
Pcs. /
Pkt.
10
Type
Pcs. /
Pkt.
Order No.
UKH 240-3L-F
①
3076510
4
UKH 240-3L/N-F
UKH 240-3L/FE-F
①
①
3076552
3076594
2
2
UKH 240-3L/N/FE-F
①
3076633
2
Courtesy of Steven Engineering, Inc. - (800) 258-9200 - sales@steveneng.com - www.stevenengineering.com
For further information and full technical data, visit phoenixcontact.net/products
PHOENIX CONTACT
77