EN
FR
DE
ES
Instruction Manual
Mode d'emploi
Benutzerhandbuch
Manual de instrucciones
Contents
1. Important Safety Instructions...................................................................... 2
2. Package Contents and Technical Specifications ...................................... 4
2.1 Package Contents .................................................................................... 4
2.2 Specifications ........................................................................................... 4
2.3 Product Diagram ...................................................................................... 5
3. Operating and Programming ....................................................................... 7
3.1 Notes Before Cleaning ............................................................................. 7
3.2 Quick Start ................................................................................................ 8
3.3 Cleaning Mode Selection ....................................................................... 11
3.4 Programming the Robot ......................................................................... 13
3.5 Optional Advanced Mopping System ..................................................... 15
3.6 Choosing a Suction Option..................................................................... 17
3.7 Alarm Indicator and Sounds ................................................................... 18
4. Maintenance ................................................................................................ 19
4.1 Dust Bin and Filters ................................................................................ 19
4.2 Smart Clean Cloth, Smart Clean Reservoir ............................................ 20
4.3 Main Brush, Direct Suction Option and Side Brushes ............................ 21
4.4 Other Components ................................................................................. 22
5. Troubleshooting ......................................................................................... 23
EN
2. Package Contents and Technical Specifications
2.1 Package Contents
EN
Instruction Manual
Robot
Charging Dock
(with Power Adapter)
Remote Control
(with Batteries)
Instruction Manual
(4) Side Brushes
Battery Pack
(with 2 screws)
Smart Clean Cloth
Smart Clean Reservoir
Direct Suction Option
Main Brush Option
(pre-installed)
Measuring Cup
2.2 Specifications
Model
Working Voltage
DM85
14.8V DC
Charging Dock Model
Rated Input Voltage
Rated Output Current
Rated Output Current
Remote Control Model
Battery
30W
CH1465
20V DC
1A
Power Adapter
Rated Input Voltage
Rated Power
Rated Output Voltage
Rated Power
20V DC
20W
OH-1024E2001000U
100-240V AC
Rated Output Voltage
20V DC
1A
Rated Power
20W
RC1360C
Input Voltage
3V DC
Batterie lithium 2550mAh
* Technical and design specifications may be changed in the course of continuous product improvement.
4
EN
2. Package Contents and Technical Specifications
2.3 Product Diagram
Robot
1
4
2
5
6
13 15 14
9
10
7
8
11
3
12
1. Top Cover
6. Side Brushes
2. Control Panel
7. Main Brush Option
3. Anti-Collision Sensors 8. Driving Wheels
4. Anti-Drop Sensors
9. Universal Wheel
5. Charging Contacts
10. Battery Pack with Screws
11. Smart Clean Reservoir Slots
12. Infrared Receiver for Remote Control
13. Dust Sensors
14. Upgrade Port (Contact Customer Service
before trying to upgrade the robot)
15. Dust Bin
Control Panel
2
1
4
3
5
1. Spot Cleaning Mode Button
2. Edge Cleaning Mode Button
3. AUTO Mode Button
4. Intensive Cleaning Mode Button
5. Return to Charger Mode Button
Charging Dock
1
2
3
1. Infrared Signal Generator
2. Charging Dock Pins
3. Power Adapter with Plug
EN
5
2. Package Contents and Technical Specifications
Remote Control
12
1
2
3
4
5
7
6
8
9
10
11
1. LED Screen
2. Return to Charger Mode Button
3. AUTO Mode Button
4. Direction Control Buttons
5. START/PAUSE Button
6. Spot Cleaning Mode Button
7. Edge Cleaning Mode Button
8. Intensive Cleaning Mode Button
9. Set Current Time Button
10. Time Scheduling Button
11. Second Time Scheduling Button
12. Infrared Emitter
Dust Bin
1
2
3
4
1. Dust Bin Handle
2. Dust Bin Lock
3. Dust Bin Cover
4. Multi-Function Cleaning Tool
5. Filter Net and High Efficiency Filter
5
Smart Clean Reservoir
1
2
3
6
EN
1. Smart Clean Cloth
2. Water Reservoir
3. Water Inlet
3. Operating and Programming
3.1 Notes before Cleaning
Before operating DEEBOT, take a few moments to survey the area to be cleaned
and remove any obstacles.
Remove power cords and small objects from
the floor that could entangle the product.
The product is not suitable for use on long-pile
carpet. Before using the product near an area
rug or on a short-pile area rug with tasseled
edges, please fold area rug edges under
themselves.
Please be aware that the robot needs at
least a 10 cm (4”) clearance to clean under
furniture without complications.
If there is a step or stairs in the cleaning area,
please operate DM85 to ensure its Anti-Drop
Sensors can detect the drop off. It may be
necessary to place a physical barrier at the
edge of the drop off to keep the unit from falling
over the edge.
EN
7
3. Operating and Programming
3.2 Quick Start
1 Charging Dock Placement
Connect the Power Adapter to the Charging Dock.
Place the Charging Dock on a level floor surface
against the wall with the base perpendicular to
the ground. Keep the immediate area 1.5m (5’) in
front of the charger and 0.5m (1.6’) on both sides
of the charger clear of objects and reflective
surfaces.
Plug the Charging Dock in.
2 Install Battery
Insert the Battery Pack into the battery slot
on the bottom of DM85. Insert and tighten the
screws with a coin to secure the Battery Pack.
3 Install Side Brushes
Attach Side Brushes to the bottom of DM85 by
pressing a brush into each slot with the matching
color until it clicks.
8
EN
3. Operating and Programming
4 Power ON
Press and hold the
button on the robot for
3 seconds. DM85 is powered ON when the
button illuminates.
Ő3Ƞ
ON
5 Charge DM85
Remove the Smart Clean Reservoir before
charging DM85.
Place DM85 on the Charging Dock making
sure the Charging Contacts on DM85 and the
Charging Dock Pins make a connection.
Charge DM85 for at least 12 hours before the
first use.
button blinks when DM85 is charging and stays on when DM85 is fully charged.
*
* Remove the Smart Clean Reservoir before charging DM85.
* Remove DM85’s battery if the robot will not be used for a long time. In case of battery leakage,
please remove the battery and wipe the battery slot clean while wearing protective gloves.
* If DM85’s battery is fully discharged or not used for a long time, its capacity may decrease and
need to be reactivated.
* To reactivate the battery: Place the robot on the Charging Dock by hand, remove after charging
for 3 minutes; repeat 3 times, then charge normally for 3-5 hours.
* DM85 uses a long life battery and does not require frequent replacement. To replace the battery,
contact Customer Service or follow the below instructions:
a. Unscrew the Battery Pack Screws, then remove the Battery Pack.
b. Insert new Battery Pack, re-insert and tighten the screws.
6 Attach a Cleaning Cloth
To use DM85’s Optional Advanced Mopping System, attach a selected Cleaning Cloth before use.
* When using the mopping feature, fold area rug edges under themselves so DM85 avoids the rug.
* Please see section 3.5 Optional Advanced Mopping System for complete instructions.
EN
9
3. Operating and Programming
7 Start
Press the AUTO Mode Button on DM85’s Control Panel or the AUTO Mode Button on the Remote
Control twice. DM85 starts to work immediately in AUTO Cleaning Mode.
* To choose another Cleaning Mode, please refer to section 3.3 Cleaning Mode Selection for details.
8 Pause
Pause DM85 by pressing the AUTO Mode Button
on the robot’s Control Panel or the START/PAUSE
Button on the Remote Control twice.
* DM85 can be directed to move forward, backward,
left and right using the Direction Control
Buttons on the Remote Control when it is
Paused. DM85 does not clean when Paused.
9 Power OFF
button on DM85 for 3
Press and hold the
seconds. DM85 is powered OFF when the
button stops glowing.
* When DM85 is not working, it is suggested to
keep it powered ON and charging.
10
EN
Ő3Ƞ
OFF
3. Operating and Programming
3.3 Cleaning Mode Selection
DM85 has several Cleaning Modes for you to choose from to effectively clean different floors.
Cleaning Modes are selected using the robot’s Control Panel Buttons or using the Remote Control.
* To switch Cleaning Modes using the robot’s Control Panel Buttons, Pause DM85 first, and then
press the desired Cleaning Mode Button on the Control Panel.
* To switch Cleaning Modes using the Remote Control, press the desired Cleaning Mode Button twice.
1 AUTO Cleaning Mode (120 Minutes)
This is the most commonly used mode. In
AUTO Cleaning Mode, DM85 cleans in a
straight line and changes direction when it
meets an obstacle.
2 Intensive Cleaning Mode
This mode is good for aggressive cleaning
or for extremely dirty or dusty floors. In this
mode, DM85 follows the same cleaning
pattern as Automatic Cleaning Mode, but is
more sensitive to dirt and dust and performs
a more thorough cleaning.
EN
11
3. Operating and Programming
3 Spot Cleaning Mode (1 Minute)
This mode is applicable for an area of highly
concentrated dirt or dust. In Spot Cleaning
Mode, DM85 focuses on a specific area to
clean.
4 Edge Cleaning Mode
This mode is good for cleaning the edges and
corners of a room. In Edge Cleaning Mode,
DM85 cleans along a border (e.g. wall).
5 Return to Charger Mode
When battery power gets low, DM85 automatically
switches to Return to Charger Mode and returns to
the Charging Dock to recharge itself.
* DM85 can be sent back to the Charging Dock
at any time by Pausing DM85, then pressing the
Return to Charger Mode Button on the robot’s
Control Panel, or pressing the Return to Charger
Mode Button on the Remote Control twice.
12
EN
3. Operating and Programming
3.4 Programming the Robot
DM85 has a Time Scheduling function. DM85 can be programmed to automatically clean once
or twice per day, at specific times, even if nobody is at home. The current time of day and the
cleaning times are scheduled using the Remote Control.
* All scheduled cleanings are performed in AUTO Cleaning Mode.
* Before programming the robot, press any button on the Remote Control to wake up the Remote Control
LED Screen. The Remote Control uses a 12-hour clock with “AM” and “PM” indicators.
Set the Current Time of Day
button on the Remote Control until
Press
flashes and
illuminates on the Remote
Control LED Screen.
Press the up and down Direction Control
Buttons
to adjust “hour” and “minute”
number. Press the left and right Direction
Control Buttons
to switch between hour,
minute and AM/PM.
button on the Remote Control to confirm
Press
and save the current time of day.
EN
13
3. Operating and Programming
Schedule the Cleaning Time
Press
button on the Remote Control until
flashes and
illuminates on the Remote
Control LED Screen.
Press the up and down Direction Control Buttons
to adjust “hour” and “minute” number. Press
the left and right Direction Control Buttons
to
switch between hour, minute and AM/PM.
button on the Remote Control to
Press
confirm and save the scheduled cleaning time.
DM85 can be scheduled to clean twice per day,
at two different times. Press
button on the
Remote Control, and then schedule the second
cleaning time using the same method as above.
DM85 automatically cleans at the scheduled
cleaning time every day.
* Please allow at least 7 hours between
scheduled cleaning times.
14
EN
3. Operating and Programming
Cancel Scheduled Cleaning Time
To cancel the first cleaning time, press and hold
button until
disappears from the Remote Control
LED Screen. The scheduled cleaning time is
cancelled.
To cancel the second cleaning time, press and hold
button until
disappears from the Remote
Control LED Screen. The second scheduled
cleaning time is cancelled.
Ő3Ƞ
Ő3Ƞ
3.5 Optional Advanced Mopping System
DM85 has an Optional Advanced Mopping System using a Smart Clean Cloth attached to a
proprietary Smart Clean Reservoir. The washable/reusable Smart Clean Cloth automatically
damp mops and then dries the floor to a spotless clean.
* Do not use the mopping system on carpet.
* When using the mopping system, fold area rug edges under themselves so DM85 will avoid
the rug.
* When using the mopping system, do not stop the robot and allow it to stand still. This prevents
the Smart Clean Cloth from leaving water on the floor.
* Remove the Smart Clean Reservoir before charging DM85.
1 Add Water to the Smart Clean Reservoir
* Before adding water to the Smart Clean Reservoir, remove the Smart Clean Reservoir from
the bottom of the robot. Remove the Smart Clean Cloth from the Smart Clean Reservoir.
Fill the provided Measuring Cup with water. Open the lid of the Water Inlet on the Smart Clean Reservoir
and slowly pour water from the Measuring Cup into the Water Reservoir. Close the Water Inlet lid.
EN
15
3. Operating and Programming
2 Attach Smart Clean Cloth
Attach the Smart Clean Cloth to the Smart Clean
Reservoir.
Attach the Smart Clean Reservoir to the bottom
of the robot. Insert the tabs on the Smart Clean
Reservoir into the Smart Clean Reservoir Slots on
the bottom of the robot until you hear a click.
3 Start
Select the desired Cleaning Mode. DM85 sweeps and mops in the selected mode.
4 Remove
After DM85 finishes cleaning, remove the
Smart Clean Reservoir from DM85, empty any
remaining water from the Water Reservoir, and
remove the Smart Clean Cloth.
16
EN
3. Operating and Programming
3.6 Choosing a Suction Option
DM85 has 2 interchangeable suction options for your convenience.
Main Brush Option: The best choice for deep
cleaning with a combination of the Main Brush
and strong suction. The Main Brush Option
comes pre-installed in DM85.
Direct Suction Option: The best choice for
daily cleaning with the Main Brush removed for
direct suction. This Suction Option is specifically
designed to pick up hair without tangling.
Install the Direct Suction Option
Turn the robot over. Push both yellow buttons
on the Main Brush Option towards the center of
the robot.
Remove the Main Brush Cover.
Remove the Main Brush.
Line up the Direct Suction Option tabs with
slots on the bottom of the robot. Press until the
component clicks into place.
A
B
A
B
Install the Main Brush Option
Turn the robot over. Push both yellow buttons
on the Direct Suction Option towards the center
of the robot. Remove the Direction Suction
Option.
Insert the Main Brush into the bottom of the
robot.
Line up the Main Brush Cover tabs with the
slots on the bottom of the robot. Press until the
component clicks into place.
EN
17
3. Operating and Programming
3.7 Alarm Indicator and Sounds
If the robot detects a problem, it emits an alarm sound and the AUTO Mode Button flashes
RED. Please troubleshoot according to the alarm sounds.
Alarm Sound
Problems
Solution
One Beep
Driving Wheel Malfunction
Check Driving Wheels for tangled hair or
debris and clean.
Two Beeps
Main Brush Malfunction
Check Main Brush for tangled hair or
debris and clean.
Three Beeps
Driving Wheel Malfunction
Turn over the robot. Press Driving
Wheels to check for a clicking sound.
If they do not click, please contact
Customer Service.
Four Beeps
Dust Bin Malfunction
Remove the Dust Bin and re-install it
properly. If the robot still emits the alarm,
please contact Customer Service.
Five Beeps
Low Battery
Manually place the robot on the Charging
Dock to charge.
Six Beeps
Side Brush Malfunction
Check Side Brush for tangled hair or
debris and clean.
Anti-Drop Sensor
Malfunction
Check Anti-Drop Sensors for dust and
clean.
Seven Beeps
18
EN
4. Maintenance
Before performing cleaning and maintenance on DM85, power OFF the robot and unplug the
Charging Dock.
4.1 Dust Bin and Filters
Cleaning the Dust Bin and the Filters
Open DM85’s Top Cover and remove the Dust Bin. Open the Dust Bin Cover and empty the Dust Bin.
Remove the filters. Pat the High Efficiency Filter clean. Do not rinse the High Efficiency Filter under water.
Wash and Dry
Rinse the Dust Bin and Filter Net under running water.
Dry the Dust Bin and Filter Net completely before reinstalling.
EN
19
4. Maintenance
4.2 Smart Clean Cloth, Smart Clean Reservoir
Cleaning the Smart Clean Cloth
If the mopping system was used, remove the Smart Clean Reservoir from the bottom of DM85 and remove
the Cleaning Cloth.
Empty any remaining water from the Water Reservoir.
Wash the Smart Clean Cloth by hand or in the washing machine, and lay flat to dry.
Cleaning the Smart Clean Reservoir
If the mopping system was used, remove the Smart Clean Reservoir from the bottom of DM85.
Empty any remaining water from the Water Reservoir and set out to dry.
Wipe the outside of the Smart Clean Reservoir with a dry cloth.
20
EN
4. Maintenance
4.3 Main Brush, Direct Suction Option and Side Brushes
A Multi-Function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has
sharp edges.
Cleaning the Main Brush
Turn the robot over. Push both buttons on the Main Brush Option towards the center of the robot.
Remove the Main Brush Cover.
Remove the Main Brush.
Use the Multi-Function Cleaning Tool to cut off and remove any hair tangled around the Main Brush.
A
B
A
B
Pull out the plastic nut on the end of the Main Brush. Remove the plastic caps on both ends. Clean any tangled
hair or debris from both ends of the Main Brush and inside the plastic caps.
Cleaning the Direct Suction Option
Cleaning the Side Brushes
Wipe the Direct Suction Option clean with a
dry cloth.
Remove the Side Brushes. Wipe the Side Brushes
and their slots with a dry cloth.
EN
21
4. Maintenance
4.4 Other Components
Use the Multi-Function Cleaning Tool to cut
off and remove any hair tangled around the
Universal Wheel.
Wipe the Anti-Drop Sensors with the brush or
the felt side of the Multi-Function Cleaning
Tool to maintain their effectiveness.
Wipe the Dust Sensors with the brush or the
felt side of the Multi-Function Cleaning Tool
to maintain their effectiveness.
Wipe the Charging Contacts and Charging Dock Pins with the brush or the felt side of the Multi-Function
Cleaning Tool to maintain their effectiveness.
22
EN
5. Troubleshooting
Please use this chart to troubleshoot common problems using DM85.
No.
1
2
3
4
Malfunction
DM85 will not charge.
DM85 gets into
trouble while working
and stops.
DM85 returns to the
Charging Dock before
it finishes cleaning.
DM85 will not clean
automatically at
scheduled time.
Possible Causes
Solutions
DM85 is not powered ON.
Press and hold AUTO Mode Button on
DM85 to power ON.
DM85 has not made a
connection with the Charging
Dock.
Be sure that DM85 has made a
connection with the Charging Dock
Pins. You may move the robot
manually to make the connection if
necessary.
Charging Dock is unplugged
while DM85 is powered
ON, which causes battery
consumption.
Plug in the Charging Dock and ensure
DM85 is powered ON. Keep DM85 on
the Charging Dock to make sure it has
a full battery to work at any time.
The battery is completely
discharged.
Re-activate the battery. Place DM85
on the Charging Dock by hand,
remove after charging for 3 minutes,
repeat 3 times; then charge normally.
DM85 is tangled with
something on the floor
(electrical cords, drooping
curtains, carpet fringe etc.).
DM85 will try various ways to get itself
out of trouble. If it is unsuccessful,
manually remove the obstacles and
restart.
When battery power gets
low, DM85 automatically
switches to Return to
Charger Mode and returns
to the Charging Dock to
recharge itself.
This is normal. No solution necessary.
Working time varies
according to floor surface,
room complexity and the
selected Cleaning Mode.
This is normal. No solution necessary.
Time Scheduling function is
cancelled.
Set Time Scheduling function as
described in section 3.4.
DM85 is powered OFF.
Power ON DM85.
The robot’s battery is low.
Keep DM85 powered ON and on the
Charging Dock to make sure it has a
full battery to work at any time.
DM85’s components are
tangled with debris.
Power OFF DM85, clean the Dust
Bin, and invert the robot. Clean Side
Brushes and the Main Brush as
described in section 4.
EN
23
5. Troubleshooting
No.
5
24
EN
Malfunction
Remote Control
failure (effective
control range of
Remote Control is
5m (16’)).
Possible Causes
Solutions
The batteries in the Remote
Control need to be replaced.
Replace with new batteries making
sure they are installed correctly.
DM85 is powered OFF or
DM85’s battery is low.
Make sure DM85 is powered ON
and fully charged.
The infrared signal cannot
be transmitted because
the Infrared Emitter on the
Remote Control or DM85’s
Infrared Receiver on DM85
is dirty.
Use a dry cloth or the Multi-Function
Cleaning Tool to wipe the Infrared
Emitter on Remote Control and the
Infrared Receiver on DM85.
There is other equipment
interfering with the infrared
signal to DM85.
Avoid using the Remote Control
near other equipment using infrared
signals.