SpeedSeal Tri-Fold Outside2.qxd
4/16/2003
12:03 PM
Page 1
An Explosionproof Seal, Every Time...
In Less Than 5 Minutes.
Chico SpeedSeal compound lets you reliably
install a complete explosionproof seal in less than
five minutes. The Chico SpeedSeal compound
PUMP
comes in a self-contained applicator kit that
eliminates the need for measuring before mixing.
Just pump to mix the material, inject the premeasured amount, replace the plug and the fitting
is sealed. It’s that easy.
The revolutionary Chico SpeedSeal compound
expands after injection to tightly fill the entire
fitting, automatically separating the conductors.
The time-consuming and tedious task of packing
INJECT
fiber to separate the individual conductors is
eliminated. Why spend 50 minutes or more
creating a seal when you can do it easier in five?
With Chico SpeedSeal compound, you’ll save an
average of $45 in labor on every ¾" sealing fitting
installed.
available only from Cooper
Crouse-Hinds.
PO Box 4999
Syracuse, NY 13221
Chico® SpeedSeal™ Compound -
SEALED
SpeedSeal Tri-Fold Inside.qxd
4/16/2003
12:05 PM
Page 1
Save an average of $45 in labor for every ¾" explosionproof seal installed.
Applications:
Features and Benefits:
Chico SpeedSeal™ Compound:
Chico® SpeedSeal™ Compound is a revolutionary material:
• suitable for cold
• installs a reliable seal in five
temperature
minutes - every time.
environments without
• hardens to a dense, strong mass
the costly need to
that is suitable for Class I, Division
build a temporary
1, Groups C & D and Class II,
shelter around
Division 1, Groups E, F & G
sealing fittings. All
hazardous applications.
ice crystals must be
• UL and cUL Listed for use with ½"
removed from inside
to 2" Cooper Crouse-Hinds sealing
the conduit seal before
fittings only.
dispensing Chico
SpeedSeal compound. The Chico
• packaged in a 2 oz. or 6 oz. preSpeedSeal compound should be
measured cartridge, eliminating the
kept above 10ºC (50ºF) prior to
need for measuring before mixing.
mixing. The sealing fitting must be
• packaged with a screw-on nozzle
kept at or above 4ºC (40ºF) during
for accurate dispensing.
the 4 to 10 minute expansion / gel
time of the compound.
• expands four times its original size
in the sealing fitting, eliminating the • one year shelf-life.
need to separate the individual
• patent pending.
conductors with Chico X fiber.
®
• designed to separate and form an
explosionproof seal around each
electrical conductor in Crouse-Hinds
EYS and EYD* sealing fittings.
• restricts the passage of gases,
vapors or flames through the
sealing fitting.
• creates a seal for Class I, Division
1, Groups C & D and Class II,
Division 1, Groups E, F & G
hazardous areas.
Chico® X Fiber:
• used in vertical applications to form
a dam between the integral bushing
of the sealing fitting and the end of
the conduit to keep Chico
SpeedSeal Compound contained in
sealing fitting while in the liquid
state. Simply pack it in the conduit
hub. No need to separate
conductors.
• not required in horizontal
applications, unless user wants to
keep Chico SpeedSeal Compound
out of conduit, adjacent fittings or
enclosures.
• Chico X fiber dams are not required
in horizontal applications, reducing
installation times.
Certifications & Compliances:
• completely hardens in 20 minutes,
simplifying use for OEMs.
• Class II, Division 1, Groups E, F & G.
• Class I, Division 1, Groups C & D.
• UL Listed (UL Standard 866).
• cUL Listed to CSA Standard C22.2 No. 30.
Chico SpeedSeal Ordering Information:
Sealing Fitting
Catalog Number *
Amount of SpeedSeal
material needed per
fitting (in ounces)
EYS1, EYS16, EYS11, EYS116
EYD1, EYD16, EYD11, EYD116
EYS2, EYS26, EYS21, EYS216
EYD2, EYD26, EYD21, EYD216
EYSX11, EYDX11
1
EYS3, EYS36, EYS31, EYS316
EYD3, EYD36, EYD31, EYD316
EYSX21, EYDX21
2
EYS41, EYS416, EYS4, EYS46
EYD4, EYD46, EYD41, EYD416
EYS51, EYS516, EYS5, EYS56
EYD5, EYD56, EYD51, EYD516
EYSX31, EYDX31
EYSX41, EYDX41
3
EYS61, EYS616, EYS6, EYS66
EYD6, EYD66, EYD61, EYD616
EYSX51, EYDX51
6
Suggested
SpeedSeal
Catalog Number
CHICO SS2
(2 oz. Cartridge)
CHICO SS2
(2 oz. Cartridge)
CHICO SS6
(6 oz. Cartridge)
CHICO SS6
(6 oz. Cartridge)
Chico X Fiber
Ordering Information:
Net Weight
Catalog Number
2 oz.
8 oz.
1 lb.
CHICO X4
CHICO X6
CHICO X7
The amount of fiber required is based
on the hub size. See following chart:
Hub Size
½"
¾"
1"
1 ¼"
1 ½"
2"
Fiber required
(in ozs.)
/32
/16
1
/8
1
1
¼
½
1
* Chico SpeedSeal Compound will be available for use with EYD drain seals by September 2003.
For more information:
Contact an authorized Cooper Crouse-Hinds Distributor, Sales Office or Customer Service Department:
4811 - 0403
In the U.S.:
In Canada:
Cooper Crouse-Hinds
P.O. Box 4999
Syracuse, NY 13221
(315) 477-5531
FAX: (315) 477-5179
crouse.customerctr@crouse-hinds.com
Cooper Crouse-Hinds Canada
(905) 507-4187
FAX: (905) 568-7048
For office locations outside of North America
or for additional product information, visit our
website at: www.crouse-hinds.com
Crouse-Hinds is a registered trademark of Cooper Industries, Inc.
© 2003 Cooper Industries, Inc.
Printed in U.S.A