TowerWorx MAG

advertisement
TOWERWORX™ MOBILE TOWERS
MAG™ MNT Series
TowerWorx MAG-MNT Series
MNT-x Mobile Application Gateways
Release 1
Overview
The MAG – MNT Series of mobile towers are designed for small-scale
mobile deployments such as repeater sites, wireless access points,
site lighting, and surveillance. The standard lifting capacity of the
MNT platform is 100 lbs of equipment and cabling with a maximum
wind loading of 70mph. The MNT platform has winch options that can
increase lifting capacity up to 250 lbs.
Each MAG – MNT Series mobile tower can be customized to include
portable power systems, integrated shelters, cabinets, cabling and
more to support many network applications.
As part of the TowerWorx “zero tool” initiative, the standard MNT
does not require any hand tools or electrical power for deployment.
It is possible for a single individual to set up the unit in less than 60
minutes. The MNT can operate in both on- and off-road environments.
Outriggers on each tower, when extended, provide lateral stability.
MAG – MNT mobile towers also support two methods of guying if
required by local ordinances or if additional stability is required due to
the wind loading factor.
All TowerWorx towers are designed using industry-standard tower
analysis and design software to allow for full wind loading and
structure design. All cabling used to raise, lower and guy these
towers is aircraft-grade. The strength required for each application
is determined using the TIA/EIA-222G specification. Sheaves are
constructed of solid steel for extra strength. All bolts are made of
Grade 5 and/or Grade 8 steel. AWS D1.1 Welding Procedures are used
in the fabrication of the tower.
The MAG – MNT Series includes three basic configurations to meet a
variety of height and support requirements. Refer to the chart on the
next page for these configurations.
Diverse Applications
Features
»» Flexible Demand Cell Coverage
»» Transportable by 1-ton Pickup
»» Temp-to-Perm Cell Sites
»» Heights to 60' (18.3m)
»» Mobile Site Lighting
»» Power and Winch options
»» Disaster Relief & Recovery
»» Small footprint
»» Monitoring & Surveillance
»» Easily deployed by one
individual
»» Mass Notification
Page 1 of 2
Rev A
antenna.com | 800.323.9122 | NASDAQ: PCTI
TOWERWORX™ MOBILE TOWERS
MAG™ - MNT Series
TowerWorx MAG MNT Series Mobile Tower
MNT-x Mobile Application Gateways
Release 1
Tower Specifications
MNT-30
MNT-45
MNT-60
Hot-Dipped Galvanized Steel Tower Sections [A53-B-35]
3
4
5
Hand Crank Tilt Winch [2,000 lbs]
1
1
1
Hand Crank Extension Winch [2,000 lbs]
1
1
1
Tower Minimum Operational Height
Tower Maximum Operational Height‡
16' 4"
30' ‡
17' 8"
40' ‡
18' 4"
60' ‡
60 minutes
Operational Setup Time
60 minutes
60 minutes
Maximum Tower Lifting Capacity*
100 lbs
100 lbs
100 lbs
Maximum Wind Load (tower only)**
70mph
70mph
70mph
3-Point Guy Support
Y
Y
Y
Height from Deck to Bottom of Tower
36"
36"
36"
4WM2
Thern Tilt Winch
4WM2
4WM2
Thern Extension Winch
4WM2
4WM2
4WM2
Sheave Type
Steel Needle Bearing
Steel Needle Bearing
Steel Needle Bearing
Wire Rope Size
1/4"
1/4"
1/4"
Extension Rollers
Composite Material
Composite Material
Composite Material
Overall Trailer Length
16.5'
16.5'
16.5'
Overall Trailer Width
7' 2"
7' 2"
7' 2"
Overall Tower & Trailer Length - Transportation Mode
22' 3"
22' 3"
22' 3"
Trailer Specifications
Trailer Height - Transportation Mode
6' 8"
6' 8"
6' 8"
Per Axle
3,500 lbs
3,500 lbs
3,500 lbs
Gross Trailer Weight (GVW)
7,000 lbs
7,000 lbs
7,000 lbs
Curb Weight
3,220 lbs
3,420 lbs
3,620 lbs
One Piece Fender Wells
2
2
2
Electric Breaks per Axle
1 per axle
1 per axle
1 per axle
8,000 lbs - Leveling Jacks
4
4
4
Extendable Outriggers
4
4
4
Outrigger Steel Tube Size
3" x 3"
3" x 3"
3" x 3"
DOT - Safety Chains
Y
Y
Y
DOT - Break Away Kit
Y
Y
Y
7-Pin Trailer Electrical Plug
1
1
1
2-5/16" Ball Hitch (Adjustable to Variable Hitch Height)
Y
Y
Y
Maximum Over the Road Travel Speed
55mph
55mph
55mph
Maximum Off Road Travel Speed
15mph
15mph
15mph
Tire Size
ST225/75R15
ST225/75R15
ST225/75R15
ST225/75R15
Spare Tire
ST225/75R15
ST225/75R15
Tail Lights
LED
LED
LED
Deployed Foot Print
16' x 21'
16' x 21'
16' x 21'
* Maximum Tower Lifting Capacity refers to a properly leveled unit using standard guying, free of ice, temperatures from 33~99°F, and wind speeds of
less than 70mph. Please contact PCTEL for more information and a custom wind analysis based on customer specifications.
** Maximum Wind Load refers to a properly leveled, unloaded unit using standard guying, free of ice, and temperatures from 33~99°F. Higher wind
speeds can be accommodated depending upon guying configuration and equipment loading. Please contact PCTEL for more information and a
custom wind analysis based on customer specifications.
‡ Maximum safe operating height is dependent on equipment loading, wind loading, temperatures, and other environmental variables. Please contact
PCTEL for more information and a custom wind analysis based on customer specifications.
Page 2 of 2
Rev A
antenna.com | 800.323.9122 | NASDAQ: PCTI
Download