Get the latest information on Stile`s LED products.

advertisement
Performance Lighting Systems
Architectural Lighting Innovations
Contemporary Lighting Solutions
FAQ’s Frequently Asked Questions
LED technology is rapidly advancing. To provide the best product SPI Lighting will continue to advance our LED offering to match the newest technology. There may be times when SPI
will substitute newer and better technology than what our catalog, quotes, and submittals reflect. We will notify you of these substitutions. SPI will support, warranty every generation
of product with equal or better technology. Any special requirements for specific wattages, lumens, color temperatures, LED brands, or board construction may require special handling,
longer lead times and associated fees above the quoted price.
Can you get Energy Savings using LEDs?
Yes it is possible to save energy when using LED’s. Be sure to look at actual photometry and run applications to determine the foot
candles on your work plane. Do not just compare lumen values. There are other benefits to LED in addition to energy savings. Fixtures
in locations that are hard to reach would be perfect candidates, as lamp (LED) replacement is much less of an issue.
Do LEDs really last over 100,000 hours?
LEDs may last 100,000 hours but that depends on how you define life. Now that the industry has adopted L70, 50,000 hours is more
realistic. When reading claims be sure to understand what conditions they are made under. What were the ambient temperatures, and is
this a realistic condition based on fixture location?
Can we change the output level?
Yes we may be able to create a special board. Minimums apply, please consult factory.
Can we paint the Styk and Tryg fixture?
Accents yes, but the extrusion must be anodized.
Can we anodize other colors?
It is possible, but not suggested. Minimums apply and UV resistance is a concern. The best process for UV resistance creates limited
colors. We use black and clear.
Can we create different optical distrubtion?
Yes, and we are working on additions to cover most common applications.
What is our maximum length?
Four foot fixtures (Tryg) and eight foot fixtures (Styk) are the maximum standard length. A continuous extrusion of 18 feet long is possible, please consult factory. Some wattage limitations may also exist.
Can we do continuous row?
Yes. We mount fixtures end to end and can supply a mechanical attachment if required.
Can we mount the fixtures differently?
Absolutely. Our design is quite flexible so let us know what you need.
Can we mount LEDs inside an existing fixture?
Yes, we have the ability to mount our LED modules in many of our existing products.
How do you ensure consistency among fixtures
built today or a year from now?
All of our LED modules are date and lot coded to keep track of what LED dies are used on the board. This is a unique number on each
lot of modules.
Does the thermal management system keep
the LED junction temperature below specified
maximums in all applications?
Yes, we have test data to back that the junction temperature stays below the LED manufacturer ratings to achieve 50,000 Hr life at L70.
Is there an end-of-life policy?
Yes. See TERMS AND CONDITIONS for additional information.
This information and specifics can change and most likely will as LED technology continues to advance, and SPI continues to improve
our products at the same time.
10400 N. Enterprise Drive
Mequon, WI 53092-4475
www.spilighting.com
262.242.1420
Performance Lighting Systems
Architectural Lighting Innovations
Contemporary Lighting Solutions
STILE LED FACT SHEET
Reference Chart (Stile Tryg M)
Watts/foot
Lumens/foot
Lumens/Watt
# of LED’s
4.0W
425
81
36/ft
6.8W
675
81
36/ft
our fixture lifetime information to L70.
13.4W
1350
86
72/ft
2 x 13.4
2800
88
2 x 72/ft
Opticals
Styk
SMA
SMB
FT
Single
Dual
Single
Single
Esimates based on four foot (ft) fixture with SMB optical.
Tryg
Ambient Operating Temperature
Pyxis
Beam
All of our fixtures performance specifications are tested at 25˚(77˚F).
Color Rendering Index (CRI)
See individual specification sheets for more details. All our lamp offerings are at 80+ CRI.
Correlated Color Temperatures
Currently we offer 3500K and 4500K (Per ANSI C78.337). We can offer others. Minimums apply,
please consult factory.
Cost (Base Model)
Pyxis
Styk
Tryg S
Beam
Tryg M
$75/ft
$100/ft
$100/ft
$100/ft
$150/ft
Delivered lumens
Symmetric 60° Beam - 120° Spread
Symmetric 30° Beam - 60° Spread
Forward Throw
One strip of LED’s
Two strips of LED’s
One strip of LED’s
One strip of LED’s
Photometry
We have LM-79 photometric reports and IES files for both performance and chromaticity
measurements. Power Supply (Wattage Per Circuit)
1.) For class II per UL, max wattage per circuit is 100W (We offer a 96W, 75W, and
20W power supply, see CPS10875).
2.) Calculate max load of power supply using a 10% factor of safety to account for
electrical tolerances.
96W x .9 = 86.4W Max Load
75W x .9 = 67.5W Max Load
20W x .9 = 18.0W Max Load
3.) Calculate the total fixture wattage.
8 feet of 13.4W: 8 x 13.4W = 107.2W, need two power supplies
6 feet of 6.8W: 6 x 6.8W = 40.8W, need one power supply
4.) Decide if you need an enclosure for the power supply (PSE option).
Our wet listed power supply ships with an integral splice compartments.
This is dependent in the fixture and LED package specified. Some good guidelines for fixtures with the
highest lumen LED package:
Remote Mount - Distance Varies by Wire Gauge
-
RGB Control
Styk 1000 Lumens
Tryg S 1100 Lumens Single Strip, 1800 Lumens Dual Strip
Tryg M 1300 Lumens Single Strip, 2200 Dual Strip
Pyxis 1000 Lumens
-
Dimming
-
A good estimate using a power supplies provided by us: 15 foot using 18 gauge wire
(See CPS10875 for complete listing).
Fixtures are dimmable via a PWM (Pulse Width Modulator).
Osram has OTDIM or by others. For SPI offering see CPS11411.
Controls are specific to dimming device, the Osram OTDIM requires 0-10V dimming control.
Still requires a 24VDC power supply.
OTRGBDIM and OTDMXRGB or by others.
Requires external controller (by others).
Requires a 24VDC power supply.
Warranty
The warranty is five years for the LEDs. See TERMS AND CONDITIONS for additional information.
Whose LEDs are being used
Input Power
Cree, Nichia, Osram, and Samsung, depending on the LED package chosen.
We have three different modules. The boards consumes 4.0 watts (w) per foot (ft), 6.8w/ft, and
13.4w/ft. Power supplies are approximately 85% efficient, so you need to add on about 15%
to the per foot wattage for the actual draw of the fixture plus power supply.
Our Styk and Tryg fixtures are installed in Star Market, in Chestnut Hill, MA, which is owned by
Supervalue Supermarkets.
Our Styk and Tryg won the NGL2009 (Next Generation Luminaires) award for fixture design with Styk
winning a “Best in Class.” The NGL award is a joint venture of the IESNA (Illuminating Engineering
Society - North America), IALD (International Architectural Lighting Design), and the U.S. Department
of Energy.
LM-79 Testing by an Independant Testing Agency
We use independent testing laboratories and testing is done per LM-79 guidelines.
LM-80
LM-80 has been performed by the manufacturer of the LED diode.
TM-21 Life Testing
We do our internal temperature verification per the LED manufacturer guidelines in each of our fixtures.
Using the LM-80 lifetime information provided by the manufacturer, and TM-21 guidelines, we establish
10400 N. Enterprise Drive
Mequon, WI 53092-4475
www.spilighting.com
262.242.1420
Download