Type Catalog number FEATURES OPTICAL • Reflector – Self-flanged, specular clear or semi-diffuse reflector. Optically designed for 45 degree cutoff to lamp and lamp image. Minimum flange matches reflector finish. White painted flange optional. • Baffle/cone – Specular clear upper reflector. Microgroove baffle with white painted flange or specular black cone with flange that matches cone finish. MECHANICAL • 16-gauge galvanized steel mounting/plaster frame with friction support springs to retain optical system. Accommodates up to 7/8” thick ceiling standard. See Accessories for increased ceiling thickness capability. • Mounting bars are 16-gauge galvanized steel with continuous 4” vertical adjustment, held in place with toolless, cam-action locking system. Post installation adjustment possible without the use of tools from above or below the ceiling. Shipped pre-installed. • Galvanized steel junction box with bottom-hinged access covers and spring latches. Two combination ½”-3/4” and four ½” knockouts for straight-through conduit runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C. ELECTRICAL SYSTEM • Die-cast aluminum lampholder housing. Designed for effective heat dissipation and positive light center positioning. • Mogul-base porcelain socket with nickel-plated screw shell. • Prewired, encased-and-potted, 120/277V or 120/347V ballast tray module. Module can be attached before or after mounting of mounting/plaster frame. • Thermally-activated insulation detector. Listing • Fixtures are UL Listed for thru-branch wiring, recessed mounting and damp locations. Listed and labeled to comply with Canadian Standards (see Options). ..................................... ...................................................................................................................................................... ..................................... ...................................................................................................................................................... HID Downlights 12" AH Open Reflector MH or HPS Lamp 19-1-4 (48.9) Aperture: 11-3/4 (29.8) Ceiling opening: 12-3/8 (31.4) Overlap trim: 12-3/4 (32.4) 17-15/16 (45.5) *Alzak is a registered trademark of ALCOA. 21-11/16 (55.1) All dimensions are inches (centimeters). ORDERING INFORMATION Example: AH 175M 12AR 120 Choose the boldface catalog nomenclature that best suits your needs and write it on the appropriate line. Order accessories as separate catalog numbers (shipped separately). AH Series AH Wattage/lamp Metal Halide (includes required safety glass) 175M M175/C/BU/BD 250M M250/C/U 320M M320/C/U High Pressure Sodium 70S LU70/MED 100S LU100/MED 150S LU150/55/MED Reflector Type 12AR 12CR Clear Champagne gold 12GR Gold 12WTR Wheat 12UBR Umber 12PR Pewter Finish (blank) LD Specular low iridescent Semidiffuse low iridescent 120 277 347 Accessories SC10 Options Voltage Order as separate catalog numbers. Sloped ceiling adaptor. Degree of slope must be specified (10D, 15D, 20D, 25D, 30D). Ex: SC12 10D. CTA10 Ceiling thickness adaptor (extends mounting frame to accommodate ceiling thickness up to 2"). WLP TRW LRC QRS EC SF With lamp (shipped separately). White painted flange. Provides compatibility with Lithonia Reloc System 820. Quartz restrike system (uses maximum 150W DC base quartz lamp by others). Emergency circuit (DC socket with leads for connection to external emergency power source; maximum150W lamp). Single fuse. QRSTD Quartz restrike system with time delay. CSA SCWA CGL Listed and labeled to comply with Canadian Standards. Super CWA pulse start ballast Safety glasses (with socket for enclosed metal halide, 150W andbelow). AH 12 OPEN DHID-290 12" AH Open Reflector, Gotham Series Distribution curve Distribution data Output data Coefficient of utilization Single luminaire data 30" above floor AH 250M 12AR, 250W M250/C/U lamp, 0.9 s/mh, 20500 rated lumens, test no. 2189060602 90° From 0° Lumens 0° 15284 5° 15246 1437 15° 13522 3732 25° 9024 4123 35° 3955 2610 45° 913 858 55° 69 104 65° 22 23 75° 1 4 85° 0 0 90° 0 3100 6200 45° 9300 cp. 12400 15500 0° Zone Lumens %lamp 0°-30° 9292 0°-40° 11902 0°-60° 12864 0°-90° 12891 90°-180° 0 0°-180° 12891 45.33 58.06 62.75 62.88 0.0 62.88* * Efficiency ρf 20% ρc 80% 50% 30% ρw 50% 30% 50% 30% 10% 50% 1 2 3 4 5 6 7 8 9 10 70 67 63 60 57 54 51 49 46 44 69 65 61 57 54 51 48 46 43 41 67 63 61 58 55 53 50 48 45 43 66 62 59 56 53 50 47 45 42 40 64 62 59 57 54 52 49 47 45 43 64 61 58 55 52 50 47 45 42 40 Initial fc Mount at beam height center 8' 10' 12' 14' 16' 505.3 271.7 169.4 115.6 83.9 50% 10% beam angle 46.6° beam angle 74.9° fc at fc at Beam beam Beam beam diameter edge diameter edge 4.7' 252.6 6.4' 135.9 8.2' 84.7 9.9' 57.8 11.6' 41.9 8.4' 11.5' 14.6' 17.6' 30.1' 50.5 27.2 16.9 11.6 8.4 AH 250S 12AR, 250W LU250/MED lamp, 0.9 s/mh, 26000 rated lumens, test no. 2192080602 90° 4000 8000 12000 16000 20000 0° From 0° cp. Lumens 0° 19749 5° 18248 1744 15° 16658 4626 25° 13086 5932 45° 35° 6535 4232 45° 2053 1685 55° 100 203 65° 0 0 75° 0 0 85° 0 0 90° 0 Zone Lumens %lamp 0°-30° 12302 0°-40° 16533 0°-60° 18421 0°-90° 18421 90°-180° 0 0°-180° 18421 * Efficiency 47.32 63.59 70.85 70.85 0.0 70.85* ρf 20% ρc 80% 50% 30% ρw 50% 30% 50% 30% 10% 50% 1 2 3 4 5 6 7 8 9 10 79 75 70 67 63 60 56 53 50 47 78 72 67 63 59 56 52 49 46 43 78 73 69 66 62 59 56 52 49 47 76 71 67 63 59 55 52 49 46 43 75 71 68 64 61 58 55 52 49 46 74 69 65 62 58 55 51 48 45 43 Initial fc Mount at beam height center 8' 10' 12' 14' 16' 652.9 351.1 218.8 149.3 108.4 50% 10% beam angle 49.5° beam angle 78.5° fc at fc at Beam beam Beam beam diameter edge diameter edge 5.1' 236.4 6.9' 175.5 8.8' 109.4 10.6' 74.7 12.5' 54.2 9.0' 12.3' 15.5' 18.8' 22.1' 65.3 35.1 21.9 14.9 10.8 Conversion Factor ENCASED-AND-POTTED BALLAST ELECTRICAL CHARACTERISTICS Maximum line current Ballast 120/277 Metal Halide (Power Factor 90%) 175W CWA 2.00/0.87 250W CWA 2.60/1.12 High Pressure Sodium (Power Factor 90%) 150W HX 2.55/1.17 250W CWA 2.60/1.12 Maximum line current 120/347 Input watts 1.90/0.65 2.50/0.85 205/208 290/285 2.55/0.90 2.50/0.85 185 290/285 Use multiplier to determine candlepower, lumens and footcandles of other finishes and lamps. CR = .95; GR = .90; 250M = 175M x .68 IMPORTANT: Plug-in insulated receptacles provided are polarized and marked 120 or 277. Fixture is shipped with ballast plugged into 277. For 120V operation, plug into 120 receptacle. Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between laboratory data and actual field measurements. Dimensions and specifications on this catalog sheet are based on the most current available data and are subject to change without notice. DHID-290 ©2003 Gotham, Rev. 2003 DHID-290.p65