AH Spec Sheet Front

advertisement
AH-C Spec Sheet Front 4-2015 / REV 1-2016_AH Spec Sheet Front 1/11/16 8:12 AM Page 1
AH/C
Chemical Sanitizing
Single Rack Straight/Corner
Dishwashers
DISHMACHINES
FEATURES:
MODEL AH
MODEL C
n 40 racks / 160 covers per hour.
n All stainless steel construction assures long
life and years of trouble free operation.
n Unique spray arm system features upper
and lower stainless steel wash arms with
reinforced end caps. Specially designed
pull-pins allow wash arms to be easily
removed for cleaning.
n Pump purging system improves results by
eliminating soil and chemical carryover
during rinse cycle.
n Top mounted controls include built-in
chemical pumps and deliming system that
assures proper chemical usage.
n Auto start/stop makes operation safe and
easy.
n Integrated scrap tray prevents food soil from
entering drain system.
n Water inlet comes with built-in strainer, prevents debris from clogging the water valve.
n Dishmachine comes with 2 dishracks.
n Stainless steel impeller offers extended life
and service.
n Stainless Steel scrap tray, long lasting.
Available Options
n
n
Optional Temp-Sure TM
heater assures a
continuous supply of
140°F hot water that
guarantees
excellent
results.
Unique pull-pin design
allows wash arms to be
easily removed for
cleaning.
Bowl option available for
capsule dispensed
products.
n
n
n
n
n
n
Solid/Powder Dual Bowl Dispenser
The “TEMP-SURE” requires a seperate 208-240v
3 phase 40 amp power supply.
Sanitizer Alarm
Stainless Steel Dishtables
Alternative Cycle Times
Alternative Electrical Available
Stainless Steel Scrap Trap in lieu of Poly Pro
Slant shelf 21"X42"
CMA
MIZER ®
Built-in Poly ProTM scrap
accumulator. With stainless steel drawer and
lid.
Top mounted controls
include built-in chemical
pumps and deliming
system that assures
proper chemical usage.
Pump purging system
improves results by
eliminating soil and
chemical carryover
during rinse cycle.
Registered Trademark
C
UL
R
US
LISTED
COMMERCIAL
DISHWASHER
864T
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: 714-895-2141 • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
PN: 10101.00
© 1-2016 CMA, Inc.
AH Spec Sheet Back 4-2015 REV 1-2016_AH Spec Sheet Back 1/11/16 8:11 AM Page 1
AH/C
Chemical Sanitizing
Single Rack Straight/Corner
Dishwashers
DISHMACHINES
WARNINGS:
• Plumbing connections must be made by a qualified service company who will comply with all available Federal, State, and Local Health, Plumbing
and Safety codes.
• Water hardness above 3 grains per gallon should be treated by a water softener. Failure to provide soft water (3g or less) will void the machine
warranty.
Door Opening 20-1/2"
AH TOP VIEW
CMA TABLE DIMENSION
Water Inlet 3"
Off The top
5" Min.
3"
Counter
Top
12"
74"
Max Clearance
For Dishes 17"
25-3/4"
25-1/8"
Electrical
Hook Up
3" Off
The top
Inside Tank
Dimension
6-1/2"
56"
Adj.
57"
25-3/4"
CORNER TOP VIEW
5" Min.
25-3/4"
34"
Adj.
35"
1-1/2"
8-1/2"
11-1/2" Adj. 12-1/2" Scrap
Tray Drain Facing Floor
FRONT VIEW
5" Min.
25-3/4"
25- 3/8
MIN.
21"
Cleanout
Water Inlet
3" Off
The top
25-1/4"
6"
Drain
25-1/4"
Electrical
Hook Up
3" Off
The top
2 3/4"
1-1/4"MAX.
3/16"
MIN.
RIGHT VIEW
Inside Corner
Tank Dimensions
Specifications:
MODEL AH/C
USA
OPERATING CAPACITY
RACKS PER HOUR
(NSF RATED)
WASH PUMP MOTORS HP
40
40
45
30
15
90
45
30
15
90
WASH TANK CAPACITY
1.7 GAL.
(6.45 L)
PUMP CAPACITY
52 GPM
(197 LPM)
OPERATING CYCLE
WASH TIME-SEC
RINSE TIME-SEC
DWELL TIME-SEC
TOTAL CYCLE TIME
USA
METRIC
2
OPERATING TEMPERATURE
REQUIRED
RECOMMENDED
120°F
140°F
(49°C)
(60°C)
WATER CONSUMPTION
PER RACK
PER HOUR
1.7 GAL.
74 GPH
(6.45 L)
(280 LPH)
WATER REQUIREMENTS
WATER INLET
DRAIN-I.P.S.
3/4"
2"
(1.9cm)
(5.1cm)
DIMENSIONS
DEPTH
WIDTH (OUTSIDE DIMENSION)
HEIGHT
STANDARD
TABLE HEIGHT
MAXIMUM CLEARANCE
FOR DISHES
STANDARD DISHRACK
DIMENSIONS
ELECTRICAL RATING
SHIPPING WEIGHT
APPROXIMATE
METRIC
1
1
25-3/4"
25-3/4"
56"-57"
(65.4cm)
(65.4cm)
(142.2cm-144.8cm)
34"
(86cm)
17"
(43cm)
1
19-3/4"X19-3/4"
1
(50X50cm)
VOLTS
115
AMPS
16
270#
(122.5kg)
Summary Specifications: Model AH/C
CMA Energy Mizer model AH and model C low temperature, chemical sanitizing commercial dishwashers meet NSF, UL and construction standards WITHOUT the use of BOOSTER or TANK HEATERS. The models AH and C are constructed entirely of stainless steel. Each unit automatically washes, rinses and sanitizes food service utensils in standard 19-3/4" x 19-3/4" racks. Unit comes
standard with upper and lower stainless steel wash arms. The model AH and model C incorporate a pump purging system that
improves results by eliminating soil and chemical carryover during rinse cycle. Note: These machines do not have built-in
heaters, therefore produce no steam.
Advisory: CMA does NOT endorse “Tankless On-Demand” water heaters for use on
CMA Dishmachine products. CMA DOES endorse, and highly recommends, the
standard “tank” style water heaters, sized properly to handle each particular facility
with their water heating requirements.
CMA
MIZER ®
Registered Trademark
C
UL
R
US
LISTED
COMMERCIAL
DISHWASHER
864T
CMA Dishmachines 12700 Knott Street Garden Grove, CA 92841• 800-854-6417 • 714-898-8781 • Fax: 714-895-2141 • www.cmadishmachines.com
CMA reserves the right to modify specifications or discontinue models without prior notification.
PN: 10101.00
© 1-2016 CMA, Inc.
Download