Commonwealth
of Australia
No. TC 15/01, Wednesday, 7 January 2015
Published by the Commonwealth of Australia
Gazette
TARIFF CONCESSIONS
CONTENTS
TCO Applications ................................................................................................... 2
TCO Applications Withdrawn ................................................................................ 7
TCO Applications Refused .................................................................................... 8
TCOs Made ........................................................................................................... 10
Local Manufacturer Initiated - TCO Revocation Requests ................................. 14
Customs Initiated - Intention to Revoke Cancelled ............................................ 15
TCOs Revoked - Unused for over 2 years ........................................................... 16
TCOs Revoked and Re-Issued - Transcription Error .......................................... 17
Customs Initiated - TCOs Revoked ..................................................................... 18
Customs Initiated Intention to Revoke Tariff Concession Orders Duplicates ... 22
Customs Review of TCO Applications Notification ............................................ 24
Customs Review of TCO Revocations Notification ............................................ 25
Section 273 Determinations Made ....................................................................... 26
The Australian Customs and Border Protection Service (Customs and Border
Protection) publishes the Commonwealth of Australia Tariff Concessions
Gazette (the Tariff Concessions Gazette) free of charge on the Customs
internet site at: http://www.customs.gov.au
Please select “tariff”, then “tariff concessions gazette”.
The gazettes are listed in date order and may be selected from the list of Adobe (PDF) files.
General Inquiries: ........................................................... (02) 6275 6404
Facsimile: ........................................................................ (02) 6275 6376
Cat. No.
ISSN 0813-8389
©Commonwealth of Australia, 2015
2
TCO Applications
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
TCO Applic ations
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS
Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE.
Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described
are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days
of the date of publication of this Notice.
The operative date (Op.) and TC reference number follow the description of goods.
To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.
Objections to the making of TCO submission forms are available at hyperlink
http://www.customs.gov.au/webdata/resources/files/TYPABLEB4442001.pdf
For guidance on the required description style, phone 02 6275 6404, fax 02 6275 6376 or email
tarcon@customs.gov.au.
THE TABLE
Description of Goods including the
Customs Tariff Classification
3824.90.90
SILICA GEL CAT LITTER, consisting of NOT LESS THAN 99 per cent
silicon dioxide
Op. 03.12.14
Schedule 4 Item Number
General Duty Rate
50
- TC 1442734
Stated Use:
To absorb cat's urine
Applicant:
3824.90.90
UNITED WHOLESALERS PTY LTD
ALUMINIUM PASTE, consisting of BOTH of the following:
(a) aluminium flakes;
(b) diethylene glycol
Op. 09.12.14
5%
50
- TC 1443117
Stated Use:
Used in the production of aerated light weight concrete
Applicant:
3902.10.00
CSR BUILDING PRODUCTS LIMITED
PELLETS OR GRANULES, polypropylene random copolymer OR polymer,
having ALL of the following:
(a) ethylene content by weight NOT less than 2.0% and NOT
greater than 4.0%;
(b) melt flow rate (at 230 degrees C with a mass of 2.16 kg)
NOT less than 0.20 g/10 min and NOT greater than 60 g/10
min in accordance with International Standard D1238 (ASTM
D1238);
(c) density (at 23 degrees C) NOT less than 890 kg/m3 and NOT
greater than 910 kg/m3 in accordance with ATSM
International Standard D792 (ASTM D792);
(d) flexural modulus (1% secant) NOT less than 700 MPa and NOT
greater than 1 350 MPa in accordance with ATSM
International Standard D790 A (ASTM D790 A);
(e) vicat softening point NOT less than 100 degrees C and NOT
greater than 140 degrees C in accordance with ATSM
International Standard D1525 A OR D1525 B (ASTM D1525 A OR
ASTM D1525 B)
Op. 04.12.14
5%
50
- TC 1442735
Stated Use:
Used in the manufacture of pipes and household articles
5%
Applicant:
SABIC ASIA PACIFIC PTE LTD
3
TCO Applications
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Description of Goods including the
Customs Tariff Classification
3907.99.90
POLYESTER POLYOL, in primary form, having a basis of phthalic
anhydride
Op. 28.11.14
Schedule 4 Item Number
General Duty Rate
50
- TC 1441945
Stated Use:
In a variety of polyurethane and polyisocyanurate applications
such as coatings, adhesives, sealants, elastomers, flexible foam
and rigid foam applications
Applicant:
6804.22.00
ERA POLYMERS PTY LTD
5%
CUTTING DISCS, having BOTH of the following:
(a) thickness NOT greater than 1.2 mm;
(b) aluminium oxide abrasive grit
Op. 09.12.14
50
- TC 1443017
Stated Use:
Power tool discs for cutting stainless steel
Applicant:
6910.10.00
MAKITA (AUSTRALIA) PTY LTD
TOILET SUITES, including ALL of the following:
(a) pan;
(b) cistern;
(c) seat with hinged lid
Op. 08.12.14
5%
50
- TC 1442918
Stated Use:
Lavatory
Applicant:
7308.90.00
CAROMA INDUSTRIES LTD
PUSH BACK PALLET RACKING SYSTEM, including BOTH of the following:
(a) trolleys;
(b) support beams
Op. 03.12.14
5%
50
- TC 1442731
Stated Use:
Warehouse pallet stacking
Applicant:
7312.10.00
DEMATIC PTY LTD
5%
WIRE ROPE, CAPSTAN WINCH, having BOTH of the following:
(a) diameter 11 mm;
(b) breaking load NOT less than 115 kN
For the purpose of this order tolerance for (a) is + or - 5%
Op. 09.12.14
50
- TC 1443019
Stated Use:
Capstan winch rope for snow grooming machines
Applicant:
7616.99.00
DOPPELMAYR AUSTRALIA PTY LTD
WORK PLATFORMS, suspended, having ALL of the following:
(a) maximum load carrying capacity NOT less than 0.5 kN per
square meter;
(b) aluminium frame;
(c) plywood OR aluminium grated flooring panels
Op. 02.12.14
5%
50
- TC 1442728
Stated Use:
In a variety of working environments including under deck of
jetties, rigs, bridges and pipe racks
Applicant:
VERTECH GROUP PTY LTD
5%
4
TCO Applications
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Description of Goods including the
Customs Tariff Classification
8414.59.90
Schedule 4 Item Number
General Duty Rate
COOLERS, AMBIENT AIR, programmable logic controlled, having ALL
of the following;
(a) structural frame with dimensions 25.3 m X 4.95 m X 5.27 m;
(b) twenty two centrifugal fans having a flow rate of 10.4
cubic metres per second;
(c) twenty two 15 Kw electric motors;
(d) top and bottom ducting with tapered diffusers having a
exit slot velocity of 22.9 m/s
For the purposes of this Order, tolerances allowable for
specification (a) (b) and (d) is +/- 3%
Op. 04.12.14
50
- TC 1442737
Stated Use:
To reduce the surface temperature of fibre cement sheets prior
to stacking and packaging
Applicant:
8417.20.00
JAMES HARDIE AUSTRALIA PTY LTD
TUNNEL OVENS, BAKING
Op. 02.12.14
5%
50
- TC 1442411
Stated Use:
Industrial oven, for baking pastry products
Applicant:
8417.80.00
PATTIES FOODS LTD
5%
CURING OVENS, COATED FIBRE CEMENT SHEET AND/OR PANELS AND/OR
PLANKS, being EITHER of the following:
(a) single zone pre-heater oven, heating capacity 1 172 Kw
(4 000 000 Btu/hr), having ALL of the following;
(i) maximum operating temperature 350 degrees C;
(ii) 1 520 mm (60 inch) wide conveyor;
(iii) top AND bottom heating ducts, each with 1 750 m/min
(5 700 ft/min) slot velocity with air supplied by;
(a) upper 37 Kw fan motor;
(b) dual lower 18.5 Kw fan motors,
(iv) upper and lower gas burners;
(v) overall dimensions 12 490 mm x 3 696 mm x 5 146 mm
(L x W x H),
(b) five zone final cure oven, heating capacity 2 930 kW
(10 000 000 Btu/hr), having ALL of the following;
(i) maximum operating temperature 300 degrees C;
(ii) top heating ducts with 1 770 m/min (5 800 ft/min)
slot velocity with air supplied by 5 x 22 kW fan
motors;
(iii) with OR without gas burners;
(iv) overall dimensions 16 790 mm x 6 003 mm x 5 979 mm
(L x W x H)
For the purposes of this order all specifications in (a)
and (b) above have a tolerance of +/- 2%
Op. 27.11.14
50
Note:
- TC 1441889
Stated Use:
To cure the coatings applied to fibre cement sheets
Applicant:
8419.89.90
JAMES HARDIE AUSTRALIA PTY LTD
MEDICAL WASTE STERILISATION MACHINES, electric, with OR without
control panel AND/OR waste receptacle
Op. 21.11.14
5%
50
- TC 1441066
Stated Use:
Sterilisation and conversion of surgical, biological, medical
and healthcare waste to a recycled form
Applicant:
180 WASTE GROUP PTY LTD
5%
5
TCO Applications
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Description of Goods including the
Customs Tariff Classification
8421.29.00
FILTER CARTRIDGES, BIOLOGICAL SOLUTION, pleated, polyvinylidene
fluoride (PVDF) membrane, having a nominal filtration area per
254 mm element of 2 m2
Op. 01.12.14
Schedule 4 Item Number
General Duty Rate
50
- TC 1442052
Stated Use:
Removal of smallest of viruses from biological solutions
Applicant:
8421.39.00
CSL BEHRING (AUSTRALIA) PTY LTD
AIR CLEANERS, having ALL of the following:
(a) fan;
(b) water tank capacity NOT greater than 1 000 ml;
(c) weight NOT greater than 1.50 kg;
(d) with OR without ANY of the following:
(i) 12 V AC adaptor;
(ii) silicon mat;
(iii) cleaning brush;
(iv) aromatic oil;
(v) LED lights
Op. 01.12.14
5%
50
- TC 1442069
Stated Use:
Domestic air cleaner for purifying air
Applicant:
8428.20.00
AQUAPORT CORPORATION PTY LTD
PNEUMATIC POWERED CAPSULE AND/OR PLASTIC BAG TRANSFER SYSTEM,
programmable logic controlled, with OR without carrier capsules
AND/OR plastic bags, including ALL of the following:
(a) carrier capsule AND/OR plastic bag sending AND/OR
receiving stations;
(b) blowers;
(c) tubes;
(d) carrier capsule AND/OR plastic bag transfer AND/OR
diverter modules
Op. 05.12.14
5%
50
- TC 1442732
Stated Use:
To dispatch and receive lab specimens, blood products,
pharmaceuticals and documents in laboratories, pharmacies,
hospitals or blood banks
Applicant:
8428.90.00
THE LAMSON GROUP PTY LTD
DESTACKERS, CRATE, programmable logic controlled, with OR
without conveyor
Op. 02.12.14
5%
50
- TC 1442727
Stated Use:
De-stacking of returnable supermarket crates
Applicant:
8479.82.00
WOOLWORTHS LTD
MIXERS AND/OR FLOW BOOSTERS, submersible, with OR without
gearbox, having BOTH of the following:
(a) squirrel cage induction OR permanent magnet motor;
(b) two OR three blade propeller
Op. 09.12.14
5%
50
- TC 1443020
Stated Use:
For mixing and/or circulating of water and its suspensions in
wastewater treatment plant
Applicant:
SULZER PUMPS (ANZ) PTY LTD
5%
6
TCO Applications
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Description of Goods including the
Customs Tariff Classification
8479.89.90
SKIMMING AND CLEANING MACHINES, aluminium batch furnace, selfpropelled, having all of the following:
(a) telescopic boom;
(b) interchangeable blades;
(c) joystick control;
(d) variable height operator cabin
Op. 20.11.14
Schedule 4 Item Number
General Duty Rate
50
- TC 1441048
Stated Use:
For skimming the dross from liquid aluminium bath inside furnace
and for scraping (cleaning) out furnace cavity
Applicant:
8479.89.90
TOYOTA MOTOR CORPORATION AUSTRALIA LIMITED
5%
METERING MACHINES, REACTIVE RESIN FOAM AND/OR SEALANT AND/OR
ELASTOMER AND/OR COATING, with OR without EITHER of the
following:
(a) mixers;
(b) mixing AND/OR dispensing AND/OR casting AND/OR dosing heads
Op. 27.11.14
50
- TC 1441866
Stated Use:
Dosing, mixing, casting and dispersing machines for various
products including plastics such as polyurethanes, epoxy resins,
glues, sealants, silicones and various other liquid and past
media
5%
Applicant:
8479.89.90
ERA POLYMERS PTY LTD
BOOMS, OIL AND/OR GAS BURNER, whether OR not assembled,
including ALL of the following:
(a) NOT less than two structure sections;
(b) piping AND/OR cables;
(c) gas flare;
(d) rotating base plate
Op. 12.12.14
50
- TC 1443803
Stated Use:
To provide support to pipes and burners of oil and gas in
testing wells
Applicant:
8501.51.00
SCHLUMBERGER AUSTRALIA PTY LTD
DRIVE UNITS, DISTRIBUTION AND HORIZONTAL MOTION CONVEYOR,
including ALL of the following:
(a) electric motor;
(b) sprockets;
(c) bearings;
(d) driving belts
Op. 09.12.14
5%
50
- TC 1443087
Stated Use:
The goods provide movement capability to food conveyor trays by
means of variable reciprocation motions
Applicant:
8507.60.00
HEAT AND CONTROL PTY LTD
BATTERY PACKS, lithium polymer, having ALL of the following:
(a) battery capacity NOT less 3 000 mAh;
(b) input AND output voltage NOT less than 5V DC at 1A;
(c) universal serial bus port with cable;
(d) micro memory card slot;
(e) infrared laser;
(f) ultraviolet light;
(g) light-emitting diode torch
Op. 17.11.14
5%
50
- TC 1440476
Stated Use:
Charging of portable electronic devices such as smart phones,
tablets and cameras
Applicant:
CELL8 PTY LTD
5%
7
TCO Applications and
TCO Applications Withdrawn
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Description of Goods including the
Customs Tariff Classification
8518.22.00
Schedule 4 Item Number
General Duty Rate
LOUDSPEAKERS, including ALL of the following:
(a) digital amplifier;
(b) power output NOT less than 550 w RMS;
(c) universal serial bus port;
(d) NOT greater than two tweeters;
(e) NOT greater than two woofers
Op. 10.12.14
50
- TC 1443347
Stated Use:
Listening to music
Applicant:
8526.92.00
PANASONIC AUSTRALIA PTY LTD
5%
RADIO REMOTE CONTROL SYSTEMS, HYDRAULICALLY DRIVEN MOBILE CRANES
AND/OR HYDRAULICALLY DRIVEN MACHINERY, with OR without emergency
stop box, including ALL of the following:
(a) portable control module;
(b) central module;
(c) valve AND connection cables
Op. 02.12.14
50
- TC 1442413
Stated Use:
Safe, remote operation of truck mounted hydraulically driven
cranes or other hydraulic machinery
Applicant:
RXI GROUP PTY LTD
5%
TCO Applic ations Withd rawn
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269G(3) - WITHDRAWAL OF A TARIFF CONCESSION ORDER APPLICATION
The Tariff Concession Order applications set out in the following TABLE have been withdrawn by the applicant.
The number and date shown in the second column refers to the Gazette in which the application was notified.
THE TABLE
Description of Goods including the
Customs Tariff Classification
7407.10.00
7408.19.00
WIRES, refined copper, in coils
Op. 04.08.14
WIRES, refined copper, in coils, having a maximum wire
diameter NOT exceeding 6 mm
Op. 04.08.14
No. and Date
Date of
of Gazette
Withdrawal
- TC 1426938
- TC 1426939
TC 14/34
03.09.14
17.12.14
TC 14/34
03.09.14
17.12.14
8
TCO Applications Refused
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
TCO Applic ations Refus ed
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269R(1) - APPLICATIONS FOR TARIFF CONCESSION ORDERS REFUSED
Applications for Tariff Concession Orders for the goods described in the following TABLE have been refused.
THE TABLE
Description of Goods including the
Customs Tariff Classification
3902.10.00
3902.30.00
3902.30.00
RESINS, being unpigmented polypropylene heterophasic copolymer,
propylene based with comonomer ethylene, in pelletised form,
having ALL of the following:
(a) ethylene monomer composition by weight NOT less than 3%
and NOT greater than 5% of the total polymer content;
(b) melt flow rate NOT less thcn 0.20 g/10 min and NOT greater
than 0.40 g/to min in accordance with International
Standard 1133 (ISO 1133, 230 degrees Celsius/2.16 kg);
(c) density NOT less than 890 kg/m3 and NOT greater than
910 kg/m3 in accordance with Internationl Standard 1183
(ISO 1183, 23 degrees Celsius);
(d) flexural modulus NOT less than 1600 MPa and NOT greater
than 1800 MPa in accordance with International Standard
178 (ISO 178);
(e) compressive and impact strength in accordance with
Australian and New Zealand Standard 5065 (AS/NZS 5065)
Op. 25.07.14
Reason for refusal:
Substitutable goods produced in Australia in the ordinary course
of business by Qenos Pty Ltd, Altona, Vic
RESINS, unpigmented polypropylene heterophasic copolymer,
propylene based with comonomer ethylene, in pelletised form,
having ALL of the following:
(a) ethylene monomer composition by weight NOT less than
5.1% and NOT greater than 6%;
(b) melt flow rate NOT less than 6 g/10 min and NOT greater
than 8.5 g/10 min at 230 degrees Celsius/2.16 kg complying
with International Organization for Standardization
standard ISO 1133-1:2011(E);
(c) density NOT less than 900 kg/m3 and NOT greater than
910 kg/m3 at 23 degrees Celsius complying with
International Organization for Standardization
standard ISO 1183-1:2012(E);
(d) tensile modulus NOT less than 1 400 MPa and NOT greater
than 1 600 MPa at 23 degrees Celsius complying with
International Organization for Standardization
standard ISO 527-1:2012(E)
Op. 28.07.14
Reason for refusal:
Substitutable goods produced in Australia in the ordinary course
of business by Qenos Pty Ltd, Altona, Vic
RESINS, unpigmented polypropylene heterophasic copolymer,
propylene based with comonomer ethylene, in pelletised form,
having ALL of the following:
(a) ethylene monomer composition by weight NOT less than 8.5%
and NOT greater than 11.5%;
(b) melt flow rate NOT less than 9 g/10 min and NOT greater
than 15 g/10 min at 230 degrees Celsius/2.16 kg complying
with International Organization for Standardization
standard ISO 1133-1:2011(E);
(c) density NOT less than 9oo kg/m3 and NOT greater than 910
kg/m3 at 23 degrees Celsius complying with International
Organization for Standardization standard
ISO 1183-1:2012(E);
(d) tensile modulus NOT less than 1 100 MPa and NOT greater
than 1 300 MPa at 23 degrees Celsius complying with
(Continued on next page)
Schedule 4 Item Number
50
- TC 1425824
50
- TC 1425825
50
9
TCO Applications Refused
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Description of Goods including the
Customs Tariff Classification
Schedule 4 Item Number
(Continued from previous page)
International Organization for Standardization standard
ISO 527-1:2012(E)
Op. 28.07.14
Reason for refusal:
Substitutable goods produced in Australia in the ordinary course
of business by Qenos Pty Ltd, Altona, Vic
7304.29.00
8479.90.00
CASING OR TUBING, DOWNHOLE, seamless, with OR without
connectors, having BOTH of the following:
(a) conforming to American Petroleum Institute Specification
5L;
(b) outside diameter NOT less than 500 mm
Op. 01.07.14
Reason for refusal:
Substitutable goods produced in Australia in the ordinary course
of busines by Pentair Water Solutions Pty Ltd, Carole Park, Qld
DRIVE ASSEMBLIES, POOL CLEANER, submersible, including ALL of
the following:
(a) traction drive motor;
(b) impeller drive motor;
(c) electronic control board;
(d) drive housing
Op. 16.07.14
Reason for refusal:
Substitutable goods produced in Australia in the ordinary course
of business by Automatic Pool Cleaners (Australia) Pty Ltd,
Auburn, NSW
- TC 1425826
50
- TC 1422216
50
- TC 1424673
10 TCOs Made
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
TCOs Made
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE
Tariff Concession Orders have been made for the goods described in the following TABLE.
The operative date (Op.) and TC reference No. follow the description of goods.
Local manufacturers of substitutable goods may request the revocation of TCOs at any time.
THE TABLE
Description of Goods including the
Customs Tariff Classification
3212.90.00
3808.93.00
3906.90.00
3916.90.00
3919.10.00
3924.10.00
3925.90.00
3926.90.90
3926.90.90
4819.40.00
ALUMINIUM PASTE, non-leafing, having BOTH of
(a) NOT less than 20% and NOT greater than
aluminium;
(b) NOT less than 20% and NOT greater than
Point Aromatic Hydrocarbon (HA)
Op. 01.10.14
Dec. date
Schedule 4 Item Number
Last Date of Effect
the following:
80% coated
50
40% High Boiling
30.12.14
PLANT GROWTH REGULATORS, having an active constituent of
uniconazole-P
Op. 13.10.14
Dec. date 05.01.15
KITS, BATHING WATER POWDER ADDITIVE, with OR without perfume OR
colour agent, having BOTH of the following:
(a) sodium polyacrylate;
(b) sodium chloride
Op. 30.09.14
Dec. date 30.12.14
- TC 1434482
50
- TC 1435689
50
- TC 1434454
SHEETS, polycarbonate, twin wall cellular structure, having a
thickness NOT less than 8 mm and NOT greater than 10 mm
Op. 16.09.14
Dec. date 17.12.14
50
- TC 1432979
TAPE, DUCT, SEALING AND/OR JOINING, polyvinylchloride
Op. 07.10.14
Dec. date 05.01.15
- TC 1435144
50
SETS, KITCHENWARE, consisting of ALL of the following:
(a) icing AND/OR cookie shaping gun;
(b) icing nozzles;
(c) cookie discs
Op. 30.09.14
Dec. date 22.12.14
- TC 1434322
BUILDERS WARES, being sliding door corner stakes
Op. 09.10.14
Dec. date 05.01.15
- TC 1435492
POTS AND/OR POT HOLDERS, PAINT, having BOTH of
the following:
(a) volume capacity NOT greater than 500 ml;
(b) grooved plastic lids
Op. 30.09.14
Dec. date 22.12.14
50
50
50
- TC 1434381
COUNTING PIECES, PRESCHOOL TEACHING AID, plastic, with OR
without plastic container
Op. 30.09.14
Dec. date 30.12.14
50
- TC 1434451
BAGS, BAKERY, paper, incorporating a plastic transparent window
Op. 30.09.14
Dec. date 22.12.14
- TC 1434456
50
11 TCOs Made
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Description of Goods including the
Customs Tariff Classification
7210.49.00
STEEL, flat rolled, non-alloy steel, hot dipped galvannealed
zinc coated, in coils, having ALL of the following:
(a) yield strength NOT less than 195 MPa and NOT greater than
295 MPa;
(b) tensile strength NOT less than 340 MPa;
(c) elongation NOT less than 34% and NOT greater than 44%;
(d) total coating mass NOT less than 35 g/m2 and NOT greater
than 65 g/m2;
(e) in EITHER of the following sizes:
(i) thickness 0.70 mm AND width 818 mm;
(ii) thickness 0.70 mm and width 855 mm
For the purposes of this order, tolerances allowable for
specification (e) are:
(a) thickness +/- 10%
(b) width +/- 1%
Op. 07.10.14
Dec. date 30.12.14
7615.10.00
8302.41.00
8413.70.90
8413.70.90
8419.39.90
8419.50.90
8419.50.90
Schedule 4 Item Number
Last Date of Effect
SETS, FOOD MIXING, consisting of two OR more of the following
categories:
(a) bowl;
(b) scraper AND/OR paddle;
(c) splash guard
Op. 08.10.14
Dec. date 05.01.15
SETS, CAVITY DOOR ROLLER, axial float, consisting of ALL of the
following:
(a) wheel assemblies;
(b) base plates;
(c) door guides;
(d) bumper stop;
(e) adjusting spanner;
(f) screws AND tips
Op. 09.10.14
Dec. date 05.01.15
INSULATING OIL PUMPS, TRANSFORMER AND RECTIFIER, centrifugal,
having an operating temperature NOT less than -10 degrees
Celsius and NOT greater than 100 degrees Celsius
Op. 07.10.14
Dec. date 05.01.15
PUMPS, centrifugal, vertical multistage, having ALL of the
following:
(a) in line suction AND discharge;
(b) stainless steel hydraulic parts;
(c) volume flow rate NOT greater than 110 m3/h;
(d) suction AND discharge diameter NOT less than 32 mm and
NOT greater than 100 mm
Op. 17.10.14
Dec. date 05.01.15
REFRIGERATED AIR DRYERS, having ALL of the following:
(a) air flow capacity NOT less than 20 m3/h at 25 degrees C
ambient temperature;
(b) single phase OR multi-phase power supply;
(c) digital controller;
(d) air to refrigerant heat exchanger;
(e) air to air heat exchanger;
(f) water OR air cooled condenser
Op. 03.10.14
Dec. date 30.12.14
50
- TC 1435154
50
- TC 1435193
50
- TC 1435491
50
- TC 1435133
50
- TC 1436561
50
- TC 1435146
HEAT EXCHANGERS, LIQUID NATURAL GAS (LNG) CONDITIONING PLANT,
being EITHER of the following:
(a) shell AND tube heat exchangers, incorporating a gas
impurity remover;
(b) kettle type heat exchanger, incorporating a liquid propane
level controller
Op. 21.07.14
Dec. date 05.01.15
50
- TC 1425071
RECUPERATORS, STEEL MANUFACTURING FURNACE
Op. 22.09.14
Dec. date 22.12.14
- TC 1433794
50
12 TCOs Made
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Description of Goods including the
Customs Tariff Classification
8419.81.90
8419.81.90
8419.89.90
8419.89.90
8419.90.00
8421.29.00
8424.30.90
8427.10.00
COOKING TUNNELS, FOOD MANUFACTURING, including BOTH of the
following:
(a) steam tunnel;
(b) plastic belt conveyor
Op. 24.09.14
Dec. date 22.12.14
COFFEE MAKING MACHINES, ESPRESSO, having ANY of the following:
(a) multiple boilers;
(b) programmable logic control;
(c) individual group temperature controls;
(d) group head height EXCEEDING 15 cm from drip tray;
(e) independent steam boiler
Op. 03.10.14
Dec. date 30.12.14
COOLING BELTS, FOOD MANUFACTURING, including BOTH of the
following:
(a) steel mesh conveyor belt;
(b) fans
Op. 24.09.14
Dec. date 22.12.14
WATER BOX COOLING SYSTEM, STEEL ROD MILL, including ALL of the
following:
(a) nozzles;
(b) troughs;
(c) headers;
(d) guides;
(e) valve skids
Op. 24.09.14
Dec. date 22.12.14
PARTS, RECUPERATOR, STEEL MANUFACTURING FURNACE, being
recuperator tube bundles
Op. 22.09.14
Dec. date 22.12.14
CONDENSATE POLISHING SYSTEM, TECHNICAL AMMONIUM NITRATE PLANT,
including ALL of the following:
(a) plate heat exchanger;
(b) pumps;
(c) membrane cartridge filters;
(d) reverse osmosis membranes;
(e) tanks;
(f) ion exchange bed;
(g) interconnecting pipes AND cable;
(h) valves;
(i) instrumentation AND/OR control module
Op. 11.09.14
Dec. date 18.12.14
PIPE COATING REMOVAL SYSTEM, SUBSEA, umbilical connected, having
BOTH of the following:
(a) coating removal module;
(b) tool support module
Op. 07.10.14
Dec. date 30.12.14
AUTOMATED GUIDED VEHICLES, programmable logic controlled, laser
guided, rechargeable battery powered, having EITHER of the
following:
(a) maximum towing capacity NOT less than 31.8 t AND
maximum lifting capacity NOT less than 1.76 t;
(b) maximum lifting capacity NOT less than 22 t
Op. 10.10.14
Dec. date 05.01.15
Schedule 4 Item Number
Last Date of Effect
50
- TC 1433892
50
- TC 1434733
50
- TC 1433893
50
- TC 1433978
50
- TC 1433795
50
- TC 1432517
50
- TC 1435142
50
- TC 1435506
13 TCOs Made
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Description of Goods including the
Customs Tariff Classification
8428.90.00
8429.59.90
8431.43.00
8479.89.90
8479.89.90
8479.89.90
8479.89.90
8481.80.90
8481.80.90
8482.10.90
8504.40.90
HOPPERS, BULK MATERIALS HANDLING, mobile, ship side, inverted,
having ALL of the following:
(a) dust extraction control AND recovery system;
(b) dust suppression system;
(c) hopper bowl;
(d) stairways AND platforms;
(e) dolly base incorporating an hydraulic system;
(f) control AND electrics cabin;
(g) top valve system;
(h) control boxes;
(i) dust piping;
(j) deflector shield system
Op. 15.09.14
Dec. date 17.12.14
Schedule 4 Item Number
Last Date of Effect
50
- TC 1432886
BACKHOE LOADERS, tracked, having BOTH of the following:
(a) side shifting backhoe;
(b) maximum diesel engine power NOT less than 32 kW
Op. 16.09.14
Dec. date 22.12.14
- TC 1433075
PARTS, ROTARY SIDEWALL CORING SYSTEM, being mandrels
Op. 13.10.14
Dec. date 05.01.15
- TC 1435686
CLEAN IN PLACE SYSTEM, programmable logic controlled, including
ALL of the following:
(a) tanks having a capacity NOT greater than 2 500 litres;
(b) probes;
(c) valves;
(d) pumps;
(e) piping;
(f) switches;
(g) heat exchanger
Op. 08.08.14
Dec. date 19.12.14
50
50
50
- TC 1428022
REMINERALISATION SYSTEM, DESALINATED WATER, programmable logic
controlled, including ALL of the following:
(a) static mixer with CO2 gas injector;
(b) calcite solution dosing vessel;
(c) support structure frame;
(d) control panel;
(e) valves;
(f) piping
Op. 24.09.14
Dec. date 22.12.14
50
- TC 1434012
LOCKS, RAM, BLOW OUT PREVENTER, OIL AND GAS WELL
Op. 08.10.14
Dec. date 05.01.15
- TC 1435221
DOSING AND BLENDING MACHINES, gravimetric
Op. 10.10.14
Dec. date 05.01.15
- TC 1435498
50
50
TAPS, BEVERAGE DISPENSER, stainless steel, having ALL of the
following:
(a) O-rings;
(b) gaskets;
(c) dispenser valve;
(d) valve internal bore hole diameter NOT less than 10 mm;
(e) tap cast body
Op. 08.10.14
Dec. date 05.01.15
- TC 1435488
MARINE RISER DIVERTERS, OIL AND GAS, FLOATING DRILLING MODULES
Op. 09.10.14
Dec. date 05.01.15
- TC 1435495
BEARINGS, DOOR CARRIAGE ASSEMBLY, unground, with plastic axle
Op. 09.10.14
Dec. date 05.01.15
- TC 1435493
CHARGERS, BATTERY, AC TO DC, having an output voltage NOT
greater than 10 V
Op. 30.09.14
Dec. date 22.12.14
50
50
50
50
- TC 1434382
14 TCOs Made and
Local Manufacturer Initiated - TCO Revocation Requests
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Description of Goods including the
Customs Tariff Classification
8518.22.00
8544.49.20
8709.11.00
9503.00.20
9503.00.20
9503.00.20
9503.00.99
Schedule 4 Item Number
Last Date of Effect
LOUDSPEAKERS, having an in-built amplifier with maximum power
output NOT greater than 40 W, with OR without ANY of the
following:
(a) cables AND/OR cable connectors;
(b) remote control;
(c) brackets
Op. 04.08.14
Dec. date 05.01.15
CABLES, CONTROL, annealed copper stranding, having ALL of the
following:
(a) cable cross sectional area NOT greater than 2.5 mm2;
(b) strand diameter NOT greater than 0.25 mm;
(c) polyvinyl chloride (PVC) sheath;
(d) voltage capacity NOT less than 300 V and NOT greater
than 500 V
Op. 08.10.14
Dec. date 30.12.14
AUTOMATED GUIDED VEHICLES, electric powered, programmable logic
controlled, laser guided, having BOTH of the following:
(a) maximum carrying capacity NOT less than 6.4 t;
(b) rechargeable electric vehicle batteries
Op. 10.10.14
Dec. date 05.01.15
50
- TC 1426940
50
- TC 1435191
50
- TC 1435500
DOLLS, with OR without ANY of the following:
(a) clothes;
(b) shoes;
(c) hats;
(d) diapers
Op. 30.09.14
Dec. date 22.12.14
50
- TC 1434452
HUMAN FIGURINES, plastic
Op. 30.09.14
- TC 1434455
50
Dec. date 22.12.14
DOLLS, plastic, height NOT greater than 16 cm, with
OR without stickers OR paper handbag
Op. 13.10.14
Dec. date 05.01.15
TUNNELS, CHILDREN'S CRAWLING, with OR without EITHER of the
following:
(a) crawling mat;
(b) hanging toy
Op. 01.10.14
Dec. date 30.12.14
50
- TC 1435507
50
- TC 1434606
Local Man ufact ure r Initi ated - TCO Rev ocati on Re ques ts
NOTIFICATION OF AN AUSTRALIAN INDUSTRY REVOCATION REQUEST - SECTION 269SC(1A) CUSTOMS ACT
An application has been lodged for revocation of the Tariff Concession Order set out in the following TABLE.
The Lodgement Request Date shown in the table below is the intended revocation date for the Tariff Concession
Order which will take effect should the application for revocation be successful.
Importations not covered by in-transit provisions may be subject to post action as any decision to revoke an
order is backdated to the date of request for revocation.
THE TABLE
Description of Goods including the
Customs Tariff Classification
8537.10.90
MOTOR STARTERS, ELECTRIC MOTOR, FORWARDING AND REVERSING
Op. 09.09.14
Dec. date 01.12.14
Schedule 4 Item Number
Lodgement Request Date
- TC 1432081
50
22.12.14
15 Customs Initiated - Intention to Revoke Cancelled
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Customs Initia ted - In tenti on t o Revok e Ca ncelled
CUSTOMS ACT 1901
CANCELLATION OF THE INTENTION TO REVOKE
The intention to revoke the Tariff Concession Order for goods described in the following TABLE has been
cancelled.
THE TABLE
Description of Goods including the
Customs Tariff Classification
6910.10.00
BASINS, BATHROOM, vitreous china, excluding basins with
integrated cabinets, including BOTH of the following:
(a) complying with Australian Standard 1976-1992 (AS 19761992);
(b) chrome plated brass basin waste
Op. 03.04.14
Dec. date 23.06.14
Cessation of production by local manufacturer
Schedule 4 Item Number
50
- TC 1411898
16 TCOs Revoked - Unused for over 2 years
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
TCOs Rev oked - U nuse d fo r ove r 2 yea rs
CUSTOMS ACT 1901
NOTICE PURSUANT TO SECTION 269SE(2) - TARIFF CONCESSION ORDER REVOCATION AT THE INITIATIVE OF CUSTOMS
The Tariff Concession Orders listed in THE TABLE below have not been used for at least 2 years and have been
revoked under Section 269SD(1A). In transit provisions apply.
The intention to revoke these orders was notified in Gazette TC 14/45 dated 19 November 2014.
Contact: Phone 02 6275 6404, fax 02 6275 6376 or email tarcon@customs.gov.au.
THE TABLE
Description of Goods including the
Customs Tariff Classification
3923.50.00
CAPS, BOTTLE, POWDER OR CONCENTRATE MIXING, plastic, including
BOTH of the following:
(a) powder or concentrate plastic chamber;
(b) plastic chamber seal opener rod
Op. 07.08.09
Dec. date 23.10.09
Revoked for 2 years non-use.
8417.10.00
8431.49.90
50
17.12.14
- TC 0512193
50
17.12.14
- TC 0513659
In transit provisions apply
PARTS, ALUMINIUM POTLINE CELL TENDING ASSEMBLY, having
electrical panels, being sub-assemblies comprising ANY of the
following:
(a) bogeys and beams;
(b) handrails;
(c) platforms and/or bridges;
(d) stairs;
(e) girders, incorporating crane rails;
(f) bath (residue) deliverers;
(g) anode cleaning shovels;
(h) crust breakers;
(i) anode extractors;
(j) taping and/or tools trolleys;
(k) anode gauges;
(l) operator cabins, with or without air conditioners
Op. 19.06.09
Dec. date 11.09.09
Revoked for 2 years non-use.
- TC 0928747
In transit provisions apply
STACKERS, ALUMINIUM EXTRUSIONS, comprising BOTH of the following:
(a) parallel rows of independent gripper arms;
(b) spacer inserter
Op. 07.10.05
Dec. date 03.01.06
Revoked for 2 years non-use.
50
17.12.14
In transit provisions apply
GAS OVENS, ALUMINIUM LOG HEATERS, plc, comprising BOTH of the
following:
(a) preheaters;
(b) heating zones
Op. 15.09.05
Dec. date 25.11.05
Revoked for 2 years non-use.
8428.90.00
Schedule 4 Item Number
Last Date of Effect
In transit provisions apply
50
17.12.14
- TC 0920922
17 TCOs Revoked and Re-Issued - Transcription Error
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
TCOs Rev oked an d Re- Issue d - Tr ansc riptio n Err or
CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269SE(1)
TARIFF CONCESSION ORDERS REVOKED AND NARROWER TARIFF CONCESSION ORDERS MADE IN ACCORDANCE WITH 269SD(3) OF THE
CUSTOMS ACT.
Tariff Concession Orders for the goods described in the following TABLE have been revoked and narrower Tariff
Concession Orders made in respect of the goods described below.
The operative date (Op.), decision date (Dec. date) and TC reference number follow the description of goods.
THE TABLE
Description of Goods including the
Customs Tariff Classification
Schedule 4 Item Number
Last Date of Effect
TCO REVOKED
8428.90.00
SHEET AND/OR PANEL HANDLING MACHINES, programmable logic
controlled, being ANY of the following:
(a) electronically powered forks;
(b) flippers;
(c) grippers;
(d) pallet lifters;
(e) turners;
(f) shuttles;
(g) corner transfer machines, consisting of roller AND/OR chain
conveyors with integrated forks
Op. 22.08.14
Dec. date 04.12.14
50
21.08.14
- TC 1430032
Order revoked - transcript error - see TC1443809.
TCO REISSUED
8428.90.00
SHEET AND/OR PANEL HANDLING MACHINES, programmable logic
controlled, being ANY of the following:
(a) electrically powered forks;
(b) flippers;
(c) grippers;
(d) pallet lifters;
(e) turners;
(f) shuttles;
(g) corner transfer machines, consisting of roller AND/OR chain
conveyors with integrated forks
Op. 22.08.14
Dec. date 17.12.14
50
- TC 1443809
18 Customs Initiated - TCOs Revoked
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Customs Initia ted - TC Os Rev oked
CUSTOMS ACT 1901
TARIFF CONCESSION ORDER REVOCATION AT THE INITIATIVE OF CUSTOMS
The Tariff Concession Orders listed in THE TABLE below have been revoked.
THE TABLE
Description of Goods including the
Customs Tariff Classification
3924.90.00
SHOWER HEADS, hand held, incorporating flow controller limiting
water flow to a maximum rate of 9.5 l/min at 250 Kpa, capable of
full cone spray
Op. 02.06.93
Dec. date 10.09.93
Schedule 4 Item Number
Last Date of Effect
50
17.12.14
- TC 9305137
Order revoked following intention to revoke advertised by the
CEO in Tariff Concessions Gazette TC 14/45, 19 November 2014.
In transit provisions apply
3924.90.00
SHOWER HEADS, hand held, maximum water flow of 12 l/min at 250
Kpa
Op. 02.06.93
Dec. date 17.09.93
50
17.12.14
- TC 9305140
Order revoked following intention to revoke advertised by the
CEO in Tariff Concessions Gazette TC 14/45, 19 November 2014.
In transit provisions apply
3926.90.90
EARPLUGS, INDUSTRIAL, reusable, foam
Op. 20.07.01
Dec. date 12.10.01
- TC 0106063
50
29.12.14
Order revoked following intention to revoke advertised by the
CEO in Tariff Concessions Gazette TC 14/46, 26 November 2014.
In transit provisions apply
8417.20.00
BISCUIT BAKING LINE, programmable logic controlled, having ALL
of the following:
(a) gas fired multiple burner tunnel oven;
(b) gauging and cutting modules;
(c) oven infeed conveyor;
(d) cooling conveyors;
(e) biscuit breaking module;
(f) dust dripping conveyor
Op. 04.07.12
Dec. date 26.09.12
50
06.11.14
- TC 1223473
Substitutable goods produced in Australia in the ordinary
course of business by Westmartin Leonda trading as Furnace
Engineering Australia, Notting Hill, Vic. In transit provisions
apply
8417.20.00
BAKING OVENS, BISCUIT, having a product conveyer tunnel oven
heated
by EITHER of the following:
(a) multiple heat exchangers;
(b) multiple gas-fired burners
Op. 22.02.00
Dec. date 28.07.00
Substitutable goods produced in Australia in the ordinary
course of business by Westmartin Leonda trading as Furnace
Engineering Australia, Notting Hill Vic. In transit provisions
apply
50
06.11.14
- TC 0001946
19 Customs Initiated - TCOs Revoked
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Description of Goods including the
Customs Tariff Classification
8417.20.00
Schedule 4 Item Number
Last Date of Effect
BAKING OVENS, CONVECTION, BISCUIT, with OR without
conveyor, having BOTH of the following:
(a) programmable controller;
(b) two heating zones each equipped with a heat exchanger
Op. 24.04.01
Dec. date 29.06.01
50
06.11.14
- TC 0103531
Substitutable goods produced in Australia in the ordinary
course of business by Westmartin Leonda trading as Furnace
Engineering Australia, Notting Hill, Vic. In transit provisions
apply
8417.20.00
OVEN LINES, PIZZA BASE
Op. 18.09.01
Dec. date 07.12.01
- TC 0108277
50
06.11.14
Substitutable goods produced in Australia in the ordinary
course of business by Westmartin Leonda trading as Furnace
Engineering Australia, Notting Hill, Vic. In transit provisions
apply
9506.91
CYCLES, exercise, free standing, programmable variable magnetic
resistance type with a maximum load capacity of not less than
200 watts, having an integral digital microprocessor controlled
LCD screen and the ability to provide ALL of the following
functions:
(a) readout of speed;
(b) distance travelled;
(c) calories/kilojoules burned;
(d) attachable (bodily) sensors which monitor and display
heart rate during use;
(e) fitness score;
(f) ability to accept input of data for test programme based
on age and gender of user;
(g) inbuilt safety control which terminates test programme if
heart rate exceeds a preset safe limit;
(h) memory retention of predetermined age/gender fitness norms
(i) readout at cessation of exercise programmes which provides
graded score of user fitness compared to age/gender norms;
(j) ability to provide all of the following programmes:
(i) endurance;
(ii) crosscountry;
(iii) training;
(iv) manual
Op. 02.10.92
Dec. date 22.02.93
50
29.12.14
- TC 9209150
Order revoked following intention to revoke advertised by the
CEO in Tariff Concessions Gazette TC 14/46, 26 November 2014.
In transit provisions apply
9506.91.00
CYCLES, exercise, free standing, programmable variable magnetic
resistance type with a maximum load capacity of NOT less
than 200 watts, having an integral digital microprocessor
controlled LCD screen and the ability to provide ALL of
the following functions:
(a) readout of speed;
(b) distance travelled;
(c) calories/kilojoules burned;
(d) attachable (bodily) sensors which monitor and display
heart rate during use;
(e) readout of RPM;
(f) readout wattage resistance;
(g) alarm to warn when user is 5 BPM away from target heart
rate
Op. 28.06.93
Dec. date 11.10.93
Order revoked following intention to revoke advertised by the
CEO in Tariff Concessions Gazette TC 14/46, 26 November 2014.
In transit provisions apply
50
29.12.14
- TC 9304713
20 Customs Initiated - TCOs Revoked
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Description of Goods including the
Customs Tariff Classification
9506.91.00
TRAMPOLINE, aerobic exercise, portable, circular, having ALL of
the following:
(a) 96.5 cm diameter;
(b) 32 springs;
(c) 6 screw on legs;
(d) max weight capacity 220 kg
Op. 29.10.93
Dec. date 04.02.94
Schedule 4 Item Number
Last Date of Effect
50
17.12.14
- TC 9312653
Order revoked following intention to revoke advertised by the
CEO in Tariff Concessions Gazette TC 14/45, 19 November 2014.
In transit provisions apply
9506.91.00
CYCLES, exercise, free standing, self generating programmable
variable magnetic resistance type, having an integral digital
microprocessor controlled LED screen AND the ability to provide
ALL of the following functions:
(a) flashing programming prompts;
(b) readout of distance travelled;
(c) calories per hour;
(d) total calories burned;
(e) watts;
(f) pedal RPM;
(g) elapsed time;
(h) accurate VO2 submax fitness score;
(i) inbuilt timer for pulse monitoring;
(j) ability to accept input of data for test program based on
age, weight and gender of the user;
(k) error response if test program results are outside
accepted norms;
(l) thirteen levels of resistance;
(m) hill program, random program, manual program, race program
and fit test program
Op. 16.02.94
Dec. date 20.05.94
50
29.12.14
- TC 9402284
Order revoked following intention to revoke advertised by the
CEO in Tariff Concessions Gazette TC 14/46, 26 November 2014.
In transit provisions apply
9506.91.00
EXERCISE CYCLES, stationary, microprocessor controlled, having
ALL of the following functions:
(a) five preprogrammed courses of varying terrain, each course
having four or more levels of difficulty;
(b) manual workout function which allows the user to switch
back and forth between periods of higher and lower
workloads;
(c) heart rate monitor;
(d) ability to time structure the selected exercise programme
into eight or more equal sections and display users
position within the programme on a real and elapsed time
basis;
(e) adjustable height settings for both seat and handle bars;
(f) self levelling pedals inclusive of foot restraints;
(g) readout of speed;
(h) readout of distance travelled;
(i) readout of approximate calories/kilojoules burned during
use
Op. 30.05.94
Dec. date 26.10.94
Order revoked following intention to revoke advertised by the
CEO in Tariff Concessions Gazette TC 14/47, 03 December 2014.
In transit provisions apply
50
01.01.15
- TC 9404915
21 Customs Initiated - TCOs Revoked
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Description of Goods including the
Customs Tariff Classification
9506.91.00
Schedule 4 Item Number
Last Date of Effect
CYCLES, EXERCISE, free standing, adjustable tension via magnetic
resistance, having ALL of the following:
(a) bodily attachable heart rate sensors;
(b) transportable wheels;
(c) automatic shut-off;
(d) fully enclosed wheel;
(e) fully enclosed chain drive;
(f) integral digital electronic display of:
(i) speed;
(ii) distance travelled;
(iii) approximate calories/kilojoules burned
Op. 17.08.95
Dec. date 05.12.95
50
01.01.15
- TC 9509803
Order revoked following intention to revoke advertised by the
CEO in Tariff Concessions Gazette TC 14/47, 03 December 2014.
In transit provisions apply
9603.21
TOOTHBRUSHES, electronic ion
Op. 19.09.88
Dec. date 16.03.89
Order revoked following intention to revoke advertised by the
CEO in Tariff Concessions Gazette TC 14/44, 12 November 2014.
In transit provisions apply
- TC 8807346
50
10.12.14
22 Customs Initiated Intention to Revoke Tariff Concession Orders
Duplicates
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Customs Initiated Intention to Revoke Tariff Concession Orders
CUSTOMS ACT 1901
Duplicat es
INTENTION TO REVOKE TARIFF CONCESSION ORDERS
It is intended to revoke the Tariff Concession Order for the goods described in the following TABLE.
The Chief Executive Officer’s (CEO’s), delegate has declared the intention, subject to s.269SD(1AB), to make
an order revoking the TCO in the table below with effect from Thursday 05 February 2015. On 05 January 2015,
the CEO’s delegate formed the belief in respect of the TCO, that if the TCO was not in force on that day, and
an application for the TCO was made on that day, the CEO would not have made the TCO.
That is because the TCOs are considered to be unnecessary. A TCO is considered to be unnecessary if the goods
covered by that TCO can be imported under another, often more recent, TCO that often covers a broader range of
goods.
Importers and customs brokers will not be disadvantaged by the revocation action, as TCOs will continue to
apply to the same range of goods. Before attempting to use a TCO, an importer or customs broker should check
the list of concessional instruments to ensure that the TCO still exists.
Interested parties are invited to provide, by close of business Wednesday 04 February 2015, written reasons
why the TCOs should not be revoked.
Contact: email tarcon@customs.gov.au , fax 02 6275 6376 or telephone 02 6122 5540.
For information on these Customs initiated revocations see Australian Customs Notice (ACN) 2003/68 available
for free on the Customs and Border Protection website:
http://www.customs.gov.au/webdata/resources/notices/ACN03610.pdf
THE TABLE
Intention
RETAIN
REVOKE
(1 of 1)
RETAIN
REVOKE
(1 of 2)
Concession
Number
Tariff
Classification
Description
0301019
9404.90.00
BEDS, PET, having a fabric covered foam base
0208831
9404.90.00
BEDS, DOG, having a fabric covered foam base and sides
0107842
4010.39.00
BELTS, transmission, endless
0107841
4010.39.00
BELTS, transmission, endless, but NOT including A,B,C
or D cross section belts
BELTS, transmission, endless, having tensile members of
polyester OR aramid fibres, having EITHER of the
following specifications:
(a) multi-vee rib belts:
(i) J section (a groove pitch centre of
2.35 mm or greater but NOT exceeding
2.41 mm (3/32 in. + or - 0.0001
in.));
(ii) K section (a groove pitch centre of
3.40 mm or greater but NOT exceeding
REVOKE
(2 of 2)
3.71 mm (0.140 in. + or - 0.002
0105968
4010.39.00
in.));
(iii) L section (a groove pitch centre of
4.65 mm or greater but NOT exceeding
4.75 mm (3/16 in. + or - 0.002
in.));
(iv) M section (a groove pitch centre of
9.32 mm or greater but NOT exceeding
9.48 mm (3/8 in. + or - 0.003 in.));
(b) polyurethane ribbed top, having a groove
angle of 60 degrees and top width of 3 mm,
5 mm, 7 mm or 11 mm
RETAIN
1013771
4011.20.00
TYRES, BUS OR LORRY
23 Customs Initiated Intention to Revoke Tariff Concession Orders
Duplicates
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
TYRES, BUS AND/OR LORRY, being ANY of the following:
(a) 6.50 R16;
REVOKE
(1 of 1)
(b) 7.00 R16;
0947011
4011.20.00
(c) 7.50 R16;
(d) 8.25 R15;
(e) 8.5 R17.5;
(f) 9.5 R17.5
24 Customs Review of TCO Applications Notification
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Customs Review of TCO Applic ations Notific ation
CUSTOMS ACT 1901 - NOTIFICATION OF REQUEST FOR REVIEW OF APPLICATION DECISIONS
A request has been received for review by Customs of the decision made on the application for the Tariff
Concession Order for goods described in the following TABLE.
THE TABLE
Description of Goods including the
Customs Tariff Classification
8537.20.90
SUBSTATIONS, POWER, modular, including ALL of the
following:
(a) air conditioners;
(b) alarm panels;
(c) battery banks;
(d) battery chargers;
(e) busbars;
(f) bus ducts;
(g) cables;
(h) cable tray;
(i) capacitor banks;
(j) chargers;
(k) circuit breakers;
(l) control cabinets with Distributed Control System
(DCS) AND compressor control;
(m) controllers;
(n) earthing resistors;
(o) generators;
(p) instrument AND/OR switch room;
(q) insulators;
(r) lighting arrestors;
(s) light AND/OR power distribution panels;
(t) meters;
(u) motors;
(v) Motor Control Centre (MCC);
(w) motor starters;
(x) protection relays;
(y) steel supports;
(z) switchboards;
(aa) switches;
(ab) transformers;
(ac) uninterruptible power supplies;
(ad) variable speed drives
Op. 12.06.14
Schedule 4 Item Number
Date of Lodgement of Request
50
15.12.14
- TC 1419876
Initial
Decision
REFUSE
25 Customs Review of TCO Revocations Notification
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Customs Review of TCO Rev ocati ons No tificatio n
CUSTOMS ACT 1901 - NOTIFICATION OF REQUEST FOR REVIEW OF A TARIFF CONCESSION REVOCATION DECISION
Requests have been received for review by Customs of the decisions made on the requests for revocation of a
Tariff Concession Order for goods described in the following TABLE.
THE TABLE
Description of Goods including the
Customs Tariff Classification
8537.10.90
8537.10.90
CONTROLLERS, EVAPORATIVE AIR COOLER AND/OR DUCTED HEATER
AND/OR AIR CONDITIONER, having ALL of the following:
(a) resistors;
(b) switches;
(c) protective covers
Op. 04.08.09
CONTROLLERS, DUCTED HEATER, with or without protective
mounting
plates, having BOTH of the following:
(a) resistors;
(b) electronic switches
Op. 22.10.09
Schedule 4 Item Number
Last Date of Effect
Initial
Decision
50
23.09.14
REVOKED
50
23.09.14
REVOKED
- TC 0928147
- TC 0939751
26 Section 273 Determinations Made
Commonwealth of Australia Gazette
No TC 15/01, Wednesday, 07 Jan 2015
Section 2 73 De ter mina tions Mad e
NOTICE OF DETERMINATIONS MADE UNDER PART XVI OF THE CUSTOMS ACT 1901
Under subsection 273B(2) of the Customs Act 1901, notice is hereby given of the making of determinations
applying to goods of a kind specified in the table below.
In the table:
(i) the first column specifies the kind of goods to which the determination applies, any conditions specified
in the determination, the commencement and cessation dates of the determination and the Determination
reference number;
(ii) the second column specifies the item in Schedule 4 to the Customs Tariff Act 1995 that applies to the
specified goods.
(iii) ‘AD’ indicates the determination was made by AusIndustry;
(iv)
‘DE’ indicates that the determination was made by Australian Customs and Border Protection Service
Goods ancillary to an EPBS project, including office equipment, buildings, office/personnel accommodation and
goods used in activities such as land preparation, road construction and maintenance, transportation (other
than pipes, pipelines, conveyors, power transmission lines, flexible flow lines, etc integral to the project
and used to convey gas liquids, minerals, electricity or other materials or goods) and the provision of
telecommunications and other general services are excluded. Materials, consumables and construction and
servicing equipment, including all fuels, oils lubricants, adhesives, filters, protective garments, tools,
ladders (other than articles auxiliary to and designed to be permanently attached to eligible goods under
EPBS, such as pylons, supporting structures, staircases, ladders, railings, etc) paint, varnish and the like
are ineligible under EPBS, as are spare parts used for on-going maintenance beyond the commissioning of the
project.
EPBS Determinations also apply to all goods listed in the Determination when they are imported in multiple
shipments, which may be from different locations at different times.
Where a number of EPBS Determinations are issued for a particular eligible good, all associated Determinations
must not exceed the quantity of goods approved by the Delegate in the EPBS Project Eligible Goods List.
THE TABLE
Importer
Project Proponent
Project Name
Description of Goods
Dates of Effect
Exclusions
High Density Polyethylene for use specifically in the manufacturing
of automotive fuel tanks.
30.10.14 to 28.10.16
Schedule 4
Item Number
46
- AD 01004015
Goods, imported by BREVINI AUSTRALIA PTY LTD (ABN 56060007150),
for use in the PILBARA IRON PTY LTD(ABN 75107216535),
Pilbara Iron Capital Development, as follows:
(a)
(b)
71
eighteen (18) only Drives, Conveyor; and
components of the goods specified in (a) above, including
commissioning spare parts integral to the project.
1.07.11 to 28.02.13
- AD 01004001
Goods, imported by BREVINI AUSTRALIA PTY LTD (ABN 56060007150),
for use in the PILBARA IRON PTY LTD (ABN 75107216535), Pilbara Iron
Capital Development, as follows:
(a) eighteen (18) only Drives, Conveyor; and
(b) components of the goods specified in (a) above, including
commissioning spare parts integral to the project.
1.03.13 to 29.06.13
44
- AD 01004003