Stainless Steel, Gas fired
Commercial Water Heater
This water heater will accommodate even the
most difficult installations with lower clearance
and multiple inlet and outlet connections making
it easier to replace traditional center flue heaters.
Up to 96% Thermal Efficiency
Up to 5 :1 Turndown Ratio
Industry first for Condensing Water
Heaters: Top and Side Connection
Choices for Inlet and Outlet
Ease of Installation
Extremely lightweight tank fits virtually
anywhere; 100 gallon: 63” height &
80 gallon: 55“ height
316L Stainless Steel Tank
Eliminates the need for anode rods
Vents in Inexpensive PVC
or CPVC pipe
Combined vent lengths up to 200’ in 3”
pipe or vent lengths up to 85’ in 2” pipe
Beautiful Stainless Steel Look
80/100 Gallon - 130k /199k Btuh
Inlet / Outlet Connections On Both The Top & Side
A Closer Look
Inlet / Outlet Connections On Top & Side
Top cold water inlet
(stainless steel)
Top hot water outlet
(stainless steel)
Side hot water outlet
(stainless steel)
Factory installed
ASME rated
temperature
and pressure
relief valve
Low water cutoff sensor
High limit safety sensor
Upper (hot water)
temperature sensor
Proprietary heat
exchanger: body
constructed of
90/10 cupronickel
top section constructed
of 800H stainless steel
Tank constructed of
316L stainless steel
Insulated w/ water
blown foam
2” thick in the side wall
w/ a rating of R14.2
- 3” thick in the top
w/ a rating of R21.3
Stainless steel burner
- 120 volt motor w/
wave modulation
control
Lower (cold water)
temperature sensor
Side cold water inlet
(stainless steel)
Exhaust adaptor to P VC /
CPVC / PolyPro venting
Venting Options:
- Direct vent side wall
- Direct vent vertical
- Unbalanced venting
- Room air
- Combined vent /air intake
length up to 200ft
Digital LED display
system monitoring
and temperature
adjustment
Components located
on front of heater for
easy service access,
all related hardware is
made of stainless steel
studs and brass nuts
Condensate trap
assembly
L as er Wel d ed Tank
An advanced laser allows for more precise welding
through a concentrated heat source, producing
high quality 316L stainless steel tank construction
with stronger, long lasting seams.
Why Choose A Stainless Steel Tank?
Because They Are Built To L ast!
The Advantages
Stainless Steel vs. Glass - Lined
Westinghouse’s
100 GAL. Tank
405 Lbs.
(Shipping Weight)
Top Competitor’s
100 GAL. Tank
550 Lbs.
Eliminates Scale Build-up on HX
Prolongs Tank Life
No Need for Anode Rods
Light Weight Construction
NO Anode Rods Needed!
All coated tanks require
anodes to delay inevitable
corrosion and tank failure.
The average commercial water
heater lasts about 6 years. The
Westinghouse Gas fired Commercial Water Heater stainless steel tank will outlast any
coated steel tank in the market.
SCALE BUILD-UP
HTP’s Unique Heat Exchanger
-Durable Construction
-High Performance
-Excellent Heat
Transfer Capabilities
-Self Cleaning
Stainless Steel (1.65mm thick)
welded to the top of the heat
exchanger where flue gas is
the hottest.
Transitions to 90/10 Cupronickel
(1.1mm thick) spiral design that
expands and contracts rapidly
with the change in temperature
eliminating scale build-up.
Specifications
Stainless Steel, Gas fired
Commercial Water Heater
M
•H
TP Ma
d
n Amer i c
eI
a
eI
n Amer i c
M
M
a
M
SCAQMD Rule 1146.2
P
• HT Mad
B
J
C
J
F
E
G
F
DE
H
A
G
H
PHOENIX
MULTI
WATER HEATER
Stainless
Steel, Gas
fired,FIT
Commercial
Water Heater
MODEL*
Model
GAL.
Gal.
AA
B
80
27"
55"
PHM130-80/199-80
WGCM080NG130/
WGCM080LP130
WGCM080NG199/ WGCM080LP199
80
WGCM100NG130/ WGCM100LP130
C
D WGCM100LP199
E
WGCM100NG199/
100
F
55"
46"
K
L
27”
C
B
46"
7-1/4"
27”
G
C
D
E
D
7-1/4"
17"
7-1/4"
17"
K
F
E
G
F
18-1/4"
8"
18-1/4"
8"
17”
18 ¼”
G
55”
46”
7 ¼”
63”
H
54”
J
7 ¼”K 17” L 18 ¼” M 8”
PHOENIX
MULTI FIT WATER
HEATER
PHM130-100/199-100
100 27"
63"
54"
B
L
8”
H
3"
3"
J
H
3”
46"
54"
3”
63"
54"
Input Modulation
35,000 - 130,000
2"
Vent Size
1-1/2" Inlet/Outlet
227 GAL
NIX MULTI
FIT80WATER
HEATER
PHM19940,000
- 199,000 SPECIFICATION
3"
1-1/2"
314 GAL
1st Hr
Rating
3"
405 LBS.
1" FNPT
3/4"
E, A SUFFIX OF "LP" DENOTES PROPANE GAS
3/4"
405 LBS.
160
M
38-1/4"
7-1/4"
9-1/2"
38-1/4"
7-1/4"
9-1/2"
7 ¼”
9 ½”
54”
38 ¼”
7 ¼”
9 ½”
SHIPPING
WEIGHT
MAX.
TEMPERATURE
LIMIT
285 LBS.
Shipping
Weight
¾”
285 Lbs.
¾”
315 LBS.¾”
285 Lbs.
¾”
¾”
315 Lbs.
¾”
¾”
315 Lbs.
315 LBS.
160
, WESTINGHOUSE are trademarks of Westinghouse Electric Corporation. Used under license by HTP, Inc. All Rights Reserved.
1-1/2" NPT
¾”
M
L
System
Gas Line 285Relief
LBS. Pipe
WGCM080NG130/ WGCM080LP130
35,000-130,000
2”
1 ½” NPT
227 Gal.
GAS 2" SYSTEM1-1/2"
AIR INTAKE/
MAX.
PHM130-100INLET/
35,000 AUXILIARY
- 130,000
SHIPPING238 GAL
EXHAUST
VENT
OUTLET
LINE
RELIEF
TEMPERATURE
WGCM080NG199/
WGCM080LP199
40,000-199,000
3”1-1/2"WEIGHT
1 ½” NPT
314 Gal.
CONN.
329 GALLIMIT
CONN.3" PIPE SIZE
SIZEPHM199-100 SIZE40,000 - 199,000
WGCM100NG130/
WGCM100LP130
*ALL DIMENSIONS
ARE APPROXIMATE,
A SUFFIX OF 2”
"LP" DENOTES
GAS
35,000-130,000
1 ½”PROPANE
NPT
238 Gal.
2"
1-1/2" NPT
1" FNPT
3/4"
3/4"
235 LBS
160
WGCM100NG199/
WGCM100LP199
½” NPT 160
329 Gal.
3"
1-1/2"
NPT
1"40,000-199,000
FNPT
3/4"
3/4"3”
235 1
LBS.
*All
are Approximate,
LP denotes 3/4"
Propane Gas3/4"
2" Dimensions
1-1/2"
NPT
1" FNPT
L
38 ¼”
17"
18-1/4"
8" AIR INTAKE/
3"
46" INLET/
38-1/4" 7-1/4"
9-1/2"
GAS
SYSTEM
FIRST
INPUT MODULATION
EXHAUST
OUTLETCommercial
LINE Heater
RELIEF
HOUR Water
Stainless
Steel, Gas fired,
7-1/4" 17"
18-1/4"
8" VENT3"SIZE 54"
38-1/4" 7-1/4"
SIZE
CONN. PIPE SIZE
RATING 9-1/2"
Model
PHM130-80
K
46”
PHOENIX MULTI FIT WATER HEATER SPECIFICATION
MODEL*
K
J
MKTLIT-XX - 09/ 2016